page 4 GROMAX - HAN’S LASER MARKER SERIES FIBER SERIES For more detailed information, please visit our website at www.gromaxonline.com www.gromaxlaser.com Laser engraving/marking is the process of using lasers to engrave or etch an object. The technique does not involve the use of inks, or tool bits which contact the engraving surfaces and cause mechanical extrusion or stress. G20 Fiber Laser Marker 20W Standard Fiber Laser Marker Marking area: 100x100mm (standard lens) Packing Dimension: 34’’x34’’x41’’, 350 lbs Laser Machine HL.YLP-F20 / HL. Mars 20J Fiber Laser Marker 20W Applications: YLP-F series laser marker is widely used in Electronic components, Glasses, Watches, Clocks, Plastic tools, Medical devices, IC cards, Kitchen and bathroom fixtures, etc. Model YLP-F20 MARS-20J Average Power 20 W Beam quality M2 <1.3 Marking area Standard: 100mm x100mm (standard lens) Max. size: 400mm x 400mm w/ special lens Working distance 197±2mm Min. Character size 0.5mm Repetition Rate 20~200 kHz Cooling method Air cooled Power consumption 0.5 kW Power requirement 110-220V 60 Hz Dimensions (LxWxH) 920x740x1415mm 545x186x430mm 552x125x142mm weight 260 kg 360 kg YLP-F20 Shown without Protective Cover MARS-20J Shown YLP-H20 Fiber Laser Marker 20W Standard Fiber Laser Marking area: 100x100mm (standard lens) Marker Packing Dimension: 25”x42”x56”, 350 lbs UV SERIES UV Laser Marker Model UV-3C Average Power 3W Wavelength 355 nm Repetition Rate 5-120 kHz Marking Area 100mm×100mm(standard) Marking Speed ≤7000mm/s Min. Line Width 0.01mm Min. Character Size 0.3mm Repeatability ±0.003mm Cooling Air Cooled Power requirement 220V/ 60Hz Power Consumption 2 kW Dimension 800mmx1030mmx1650mm Applications • Good for non-metalic, such as PVC, ABS, plastic etc. • Good for most materials, produces delicate high quality characters. • Used for IC cards, IT components, crafts, communication devices, electrical components etc.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
page 4
GROMAX - HAN’S LASER MARKER SERIES
FIBER SERIES
For more detailed information, please visit our website at www.gromaxonline.com www.gromaxlaser.com
Laser engraving/marking is the process of using lasers to engrave or etch an object. The technique does not involve the use of inks, or tool bits which contact the engraving surfaces and cause mechanical extrusion or stress.
HL.YLP-F20 / HL. Mars 20J Fiber Laser Marker 20WApplications:YLP-F series laser marker is widely used in Electronic components, Glasses, Watches, Clocks, Plastic tools, Medical devices, IC cards, Kitchen and bathroom fi xtures, etc.
Model YLP-F20 MARS-20JAverage Power 20 W
Beam quality M2 <1.3Marking area Standard: 100mm x100mm (standard lens)
Max. size: 400mm x 400mm w/ special lens Working distance 197±2mmMin. Character size 0.5mmRepetition Rate 20~200 kHzCooling method Air cooledPower consumption 0.5 kWPower requirement 110-220V 60 HzDimensions (LxWxH) 920x740x1415mm 545x186x430mm
Applications• Good for non-metalic, such as PVC, ABS, plastic etc.• Good for most materials, produces delicate high quality characters.• Used for IC cards, IT components, crafts, communication devices, electrical components etc.
page 5
GROMAX - HAN’S LASER WELDER SERIES
WF300 Shown
Model (Generator Only)
WF300 PB300CE
Average Power 300WMax. peak power 6kWMax. laser pulse power 30J/10msType of laser Nd: YAGWavelength 1064nmWave type Num. 50Pulse width 0.1 ~50msPulse frequency 1 ~150HzPower requirement 380V/60Hz/40ADimension Main device 1480mm×610mm×1100mm
Cooler 810mm×570mm×805mm Total Weight 900 kg
Price Call Call
*** Worktable is not included. Available upon request.
FeaturesWF300 YAG laser welder can have 1~4 welding heads independently.
• MOTIC microscope + liquid-crystal light-valve protector.• Real-time current feedback system to ensure the stability of the laser power. • Small heat-eff ected areas, no distortion or porosity.
W60 ShownWT. 225kg
FP150 Shown
Features• Welds can be applied right next to heat sensitive parts like precious gemstones, pearls or springs.• Strong and invisible high-quality repairs can be achieved in a very short time. • Welds with a spot diameter smaller than 0.15mm, standard is 0.2~2mm. • Minimum heat in weld area. • No tool wear, contact-free processing.
Model W60Average power 50WLaser wavelength 1064nmMax. Pulse energy 30J/6ms(Opt. 60J/12ms)Pulse frequency 0Hz~20HzPeak power 6 kWPower requirement 220V±5%/60Hz/20ACooling method Air cooledWaveform quantity 50 groupsPositioning method LEICA microscope 10XDimension 1060mm×600mm×1100mm
Price Call
Model FP150 WFF500Average power 150 W 500 WPulse width 0.2~50 msLaser frequency 200(max) Hz 200 HzWavelength 1070 nmOptical fi ber length 5 m
Power requirement AC 220V±10%/60HzOuter dimensions 905x610x1130 mm 448x226x650 mmCooling Air cooled Water cooled
Price Call Call
FP150 Shown
Fiber Laser Welder
Spot Welder
WF300
Features:• High Electrical Effi ciency• Ultra-low amplitude noise, high stability and ultra-long pump diode lifetime• Ideal Beam Quality, small heat aff ected zone, less deformation• Maintenance free • Single-mode Fiber Laser Delivery
Applications• Various metals such as titanium, nickel, zinc, copper, aluminum, chrome, niobium, gold and silver and other alloys.• Precision parts such as cell phone outer shells, laptop outer shells, fi ber connectors, electronic components, military industry, and medical instru-ments.
Applications• Good for most metals such as stainless steel, titanium, Ni, Sn, Zn, Cu, Cr, gold, silver, etc.• Repair of denture, jewelry, IC’s, small electronic components, and guns, etc.
Applications• Good for most metals such as stainless steel, titanium, Ni, Sn, Zn, Cu, Cr, gold, silver, etc.• Good for cell phone bat-tery packs , sensors, clocks, watches, jewelry, electronics components, eyeglasses, crafts, precision instruments and medi-cal devices.
Laser Machine
page 6
ROBOTs Elfi n Series
ROBOTS
Why to choose a robotic laser welding system?With the robotic laser welding system; >> increased effi ciency on repetitive works>> Easy to program and operate>> Reduce the waste caused by operator >> Reduce the Labor cost and management cost>> Improve effi ciency and ensure welding quality
Reduce production costs, increase output!The costs of equipment and installation usually will pay back in less than 1 year!
Robotic laser welding1 Robotic movement workstation • Light weight, available to be mounted at any angle and any position of the production line • The collaborative robot control, ensures the safety of operators, workpieces and equipment around it. • Non-contact laser welding at arbitrary angles. • Easy deployment , ideal for small batch productions. • All-in-one Automation station, simple to operate. • Teaching a mini program with the pendant usually takes less than 10 mins.2 laser welding system • High welding speed • Deep welding penetration • Small heat aff ected zone nice welding appearance • Virtually maintenance free
Application • Industrial area: medical instruments, auto parts and accessories, etc.. • Materials: most of metal products. • Welding depth: <1.5mm.
ZNC32E60 ZNC43E90 ZNC55E90 ZNC75E120Work Tank (LxWxH) inch 34 x 21 x 14 39 x 22 x 15 46 x 27 x 17 68 x 39 x 22Work Table (LxW) inch 26 x 14 26 x 14 32 x 18 43 x 24Table travel (X) inch 12 16 20 28Table travel (Y) inch 10 12 16 22
GROMAX Super Drill EDM Price Start from $26,000.00
Features:Fast and accurate deep hole drilling application with capacity from 0.0078" - 0.236 " (0.2 mm - 6.0 mm) in diameter or bigger capacity with 120amp power supply
Control Panel Features:Multiple display functions for Dimension, EDM parameter and machining depth settingMachining stability adjustment: Fine tune and stabilize machining conditions result in fi ner surface fi nishInch/metric conversion 0.0002" resolutionAuto quill retract Center positioning Machining time timer EDM parameters recallEdge fi ndEDM parameter memory bank stores up to 480 diff erent settings for steel, carbide, and aluminum. Some parameters are preloaded in memory, user can use these parameters as reference for testing, editing, and recording new data accordingly.
New PanelFully Digital Panel3-Axis DRO & Auto Depth ControlEDM Parameters Save & ReadCan Be Mounted on Column
Test Burn Table (through hole):Depth Workpiece Electrode Tube
Features: (SD-32)Maximum stability of workhead feed60 Amps. maximum machining currentHeavy duty stainless work tableAuto depth controlSuper fast speed; low electrode wearOne V one fl at, Turcite B coated slide waysMicro computer control, MOS-FET special circuit designMaximum distance between table surface and electrode holder: 23.62”
Micro computer Control
Specifi cations SD-32Y SD-35Y SD-45YDrilling Capacity 0.006”- 0.250” 0.006”- 0.250” 0.006”- 0.250”Work Table Size (L x W) 18.1”x 8.25” 23.5”x 11.8” 23.6”x 11.8”Maximum Work Piece Weight 440 lb. 880 lb 1100 lbTable Travel (X x Y) 11.81” x 7.8” 13.78” x 9.84” 17.75” X 13.75”Quill Servo Travel Z1 13.58” 13.58” 13.58”Backslide Travel Z2 7.87” 7.8” 7.84”Distance guide to tabletop 2.2” – 16” 5.25” - 19.5” .6.25”- 21”Guide Travel (Z3) 6.0” 6.0” 6.0”Dielectric Capacity 5.3 Gal. x 2 5.3 Gallons x 2 5.3 Gallons x 2Dielectric Ionized Water Ionized Water Ionized WaterMachine Weight 1,900 lbs. 2,000 lb. 2,300 lbMachine Dimensions (L x W x H) 45 x 46” x 89” 42.5”x 42.5” x 82.5” 55.1” x 55.1” x 86.6” Power Supply
Power input 3 KVAMax. Machining Current 50AOn Time 12 StepsOff Time 10 StepsPeak Current Setting 16 Steps
EDM & ACCESSORIES
Portable Drill EDM PD-16Y
Features: (PD-16Y)Maximum stability of workhead feed50 Amps. Max. machining currentSuper fast speed; low electrode wearCan be moved to location for diffi cult applicationMicro computer control, MOS-FET special circuit designDistance between table surface and electrode holder: 23.62”
Model PricePD-16Y (50amp.) $17,500.00High pressure pump included
Standard Accessories:3-axes Digital Readout System Auto-Depth Control50 Amps. Power Current Use distilled water as dielectric1.0 MM Ceramic Guide (1 pc) 1.0 MM Brass Tubing (10 pcs)Work Lamp (1 pc) Tool Box & Tools (1 set)Coolant Pump & Tank (1 set) Plastic Shield (1 set)
High Pressure PumpModel: HPP.CK $2,100.00
GROMAX Drill Chuck (optional) PriceA Key Type (0.3mm~3.0mm) Model: EDC30K $160.00B Key Type (0.3mm~6.5mm) Model: EDC65K $205.00C Keyless Type (0mm~1.5mm) Model: EDC15 $360.00D Keyless Type (0.3mm~3.0mm) Model: EDC30 $330.00E Keyless Type (0.3mm~3.0mm) Model: EDC30U
*For any Taiwanese Drill EDM$330.00
F Keyless Type (0.3mm~6.0mm) JT1 Model: EDC60U $360.00
A: EDC30K B: EDC65K
D: EDC30 E: EDC30U F: EDC60U
Drill EDM FilterModel: FLT-SD $15.00
C: EDC15
High Pressure Rotary Spindle(Drill Chuck Type)Model: HPRS $1,600.00
High Pressure PumpModel: HPP.FT $1,600.00
High Pressure Rotary Spindle(ER Collet Chuck Type with ER16 collet set of 6)Model: HPRS.C $1,750.00
0.5~11~2/ 2~3/ 3~4 4~5/5~6mm
page 10
Features:• Can be programmed for circular arrays, rectangles and has a fourth axis for drilling
metal sections such as robs, tubes and other shapes ; Addition of rotary indexer is necessary for this operation
• Auto Edge fi nder• Download CAD/CAM programs cby Ethernet work, RS232 or Floppy disk• De-ionized water• Linear scale, long term operation, excellent accuracy• EDM parameters stored and recall by• Auto Electrode Change (AEC) (optional)• Multiple coordinate display, and full screen display • Auto program restart function, middle start, • Program graphic check function• Auto electrode wear compensation. • Manual Data Input (MDI) function, after tested the program may save the program as a
regular fi le• Protection function while electrode touch work piece machine will stop• 6 coordinates in this system, as work piece reference position
Standard Accessories:• Paper fi lter 10μm (1pc)• Ceramic guide 0.5mm, 1.0mm (1ea)• Electrode tubes 0.5mm, 1.0mm (40ea)• Electrode holder 0.3~3.0mm (1pc) • Work light (1pc)• Tool kit and tool box (1set)• Back up program (1 CD-ROM)
Specifi cations: Model SDNC30P SDNC60P SDNC80PPrice $64,800.00 $87,000.00 $99,600.00Table size 20”x16” 28”x20” 27.5”x35.4”Servo travel (X,Y) 16”x12” 24”x16” 23.6”x31.5”Servo travel Z 15” 14” 14”Back slide travel C null Manual move by motor drive
/Program by servo (optional)Distance between guide & table
1.57”~5.51” 2”-12” 2”-12”
Table load 1100lbs 660 Lbs. 660 LbsMax. work piece size 27.6”x23.6”x5.5” 32”x24”x12” 32”x24”x12”Net weight 3300 Lbs. 7040 Lbs. 7700 LbsLay out (WxDxH) 67”x55”x82” 84”x64”x92” 84”x78”x90”Capacity of fl uid 7.96Gal 13.2 Gal (26.4 Gal optional)Packing size 86”x17”x86” 112”x72”x84” 112”x90”x83”ElectricalPower input 200,220,380,415,440(575) V,3 Phase, 50/60
HzMax. power ration 4KVA (6 KVA)Max. EDM current 25+25(optional) AmperesMin. command unit 0.0025”
(0.001mm)0.0125”
(0.005mm)0.0125”
(0.005mm)Resolution 0.0025”
(0.001mm)0.0125”
(0.005mm)0.0125”
(0.005mm)Feed back unit 1μ Linear scale 5μ (with 1μ
Linear scale)5μ (with 1μ
Linear scale)Manual speed 4 speed (Slow, Middle, High, Rapid) by pa-
tional)EDM parameter By selection work piece, electrode material &
size of EDM parameterOn line help StandardGraphic function StandardMonitor 10.4 inch TFT or 14 Inch color CRT
Optional Accessories:• Auto fi ltering system• Electrode tubes• Guides• Keyless chuck 0~1.5mm• Keyless chuck 0~3.0mm• DRAM memory IC• Auto electrode changer 16pcs• 4th axis with linear motion• 4th axis with rotate function
SDNC60P Shown
EDM & ACCESSORIES
Main Specifi cations :Drilling Capacity 0.006”- 0.250”Table Size 20.6”x 12.8”Max. Work Piece Weight 500 lb.Max workpiece size: ( L X W X H ) 32” X 25.5” X 27.5”Table Travel 15.75” X 11.75”Quill Servo Travel (Z1) 14.7”Motorized Backslide (Z2) 13.84”Max distance from guide to tabletop 16”Packing Dimension 2 PCS.Weight (APPROX.) 3,300 lb.
SDNC4030 $86,420.00
CNC CONTROL SYSTEM (0.0001” Resolution with Auto Depth Control). 50 Amp. Max. MachiningCurrent. High Pressurize Pump. C-5 Grade Ball Screws. Motorized Backslide. Stainless Steel Work Table.
Product Feature1. High accuracy and high rigidity.2. Body and cover fully made of stainless steel with increased durability and waterproof.3. Sealed with O-ring to achieve highest protection level at IP68, capable of fully merged into electrolyte for machining.4. Capable of 4-axis simultaneous machining with machine tools.5. Capable of single axis control with single axis controller.
ModelItem
Unit MNCW-115 MNCW-150 MNCW-220 MNCW-350
Table Diameter mm Φ 115 Φ 150 Φ 220 Φ 350Overall Height in Horizontal mm 170 152 205 245Center Height in Vertical mm 105 135 165 230Total Reduction Ratio 1:144 1:60 1:240 1:120Max. Rotation SpeedMotor 2000min-1 r.p.m. 13.8 33.3 8.3 16.7Indexing Accuracy arc-sec 20 20 20 20Repeatabilitiy Accuracy arc-sec 6 6 6 6Max. Work Load
Vertical kg 15 35 100 175
Horizontal kg - 50 200 350Allowable Work Inertia kg-m2 - 0.14 1.21 5.36N.W. kg 30 35 90 190
PARW SERIES / CNC Tilting Rotary Table
Product Feature1.High accuracy and high rigidity.2.Body and cover fully made of stainless steel with increased durability and waterproof.3.Sealed with O-ring to achieve highest protection level at IP68, capable of fully merged into electrolyte for machining.4.Capable of 5-axis simultaneous machining with machine tools.5.Capable of double axis control with double axis controller.
ModelItem
Unit PARW-115 PARW-120 PARW-131 PARW-151 PARW-250 PARW-400 PARW-800
Table Diameter mm Φ115 Φ120 Φ130 Φ150 Φ250 Φ400 Φ800Overall Height in Horizontal mm 175 266 266 266 410 427 780Overall Length mm 535 444.5 474.5 474.5 955 970 1266Center Height in Vertical mm 110 180 180 180 290 290 460Overall Height in Horizontal of Table mm 170 180 180 180 290 300 490Axis Rotating Tilting Rotating Tilting Rotating Tilting Rotating Tilting Rotating Tilting Rotating Tilting Rotating Tilting
Total Reduction Ratio 1:120 1:144 1:60 1:60 1:60 1:60 1:60 1:60 1:90 1:180 1:90 1:180 1:180 1:360
Spare Parts for Wire EDM • Diamond Guide • Power Feed Contact • Flushing Cup • Connected PartsFeatures:• GROMAX Wire EDM Parts are made of the highest quality materials to assure consistent and lasting wear• Exact tolerances are reached by each dimension fi nish ground• Wire surfaces are polished for smoother movements• These parts are for wire EDM from MITSUBISHI, FANUC, BROTHER, CHARMILLES, & JAPAXFor
Diamond Guide for MITSUBISHI
WM101-1 WM101-2
WM103
WM104
WM102
WM106
WM107 WM108
WM109 WM110
WM111 WM112
WM113 WM114
WM117
Model Size (mm)
Description Posi-tion
Machine Model Original P/No. Price
WM101-1-08WM101-1-10WM101-1-12
0.2050.2550.305
Wire Guide Upper & Lower
New SU, DWC-N, F (Manual) X053C082G51X053C082G56X053C082G65
$185.00
WM101-2-08WM101-2-10WM101-2-12
0.2050.2550.305
Wire Guide Upper & Lower
DWC-F1, G (Manual) X052B040G64X052B040G65X052B040G66
Lower DWC-HA. SA. SB. SZ. CX. FX. RA. FA (AF2, AF3, AT) -for WM009-
X209D212H01 $54.00
WM470-1 Power Feed Holder
Upper DWC-HA, SZ, SB, SA, SX, CX (AF2, AF3)
X208D405H01 $54.00
WM501 Cutter Unit Cutter CX: end period. FX (AF3) X056C326G51 $460.00 WM501-1 Fixed Plate Cutter CX: end period. FX (AF3) X058D376H01 $96.00 WM501-2 Aspirator Cutter CX: end period. FX (AF3) X203C145H04 $149.00 WM501-3 Detecting
Nozzle Cutter CX: end period. FX (AF3) X258D350H01 $15.00
WM502 Cutter Unit Cutter CX: beginning period. (AF3) X058D186G51 $525.00 WM502F Fixed Blade Cutter CX (M/C) (=M502-1) $106.00 WM502.MB Main Blade Main Blade for WM502 $195.00WM608V =WF501
Bearing FX, QA, RA, FA (AF3/AT) -for WM421C-
P840F000P67P840F000P69(=M422)
$15.00
WMCT421 Insulator Tip for limit switch -ceramic- Switch Patent No.P421A030P000
$32.00
For
Connected Parts for MITSUBISHI
EDM & ACCESSORIES
page 19
WS103L
Diamond Guide for SODICK
WS104
WS105
WS100 WS101
WS103WS102
WS005LS
Power Feed Contact for SODICK
WS001 WS002
WS004SWS003S
Model Size (mm)
Description Position Machine Model Original P/No. Price
WS100-08WS100-10WS100-12
0.210.260.31
Wire Guide Upper & Lower
AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) - diamond-
308143630833303083331
$2,150.00
WS101-08WS101-10WS101-12
0.210.260.31
Wire Guide Upper & Lower
AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AF) (dia: 0.22, 0.27, 0.32mm also available) -sapphire-(Made in Japan)
AQ. A. AW. EPOC Series. AP200~550. PGW200. EXC100. BF. JL Series (AWT Die A)AWT Die A (dia: 0.22, 0.27, 0.32, 0.35, 0.4, 0.6mm also available) -sapphire-
WS209L L=4 Nozzle Lower A Series, PGW, AP -long head- $14.00WS209W 6ø Nozzle
S87-3 Lower AQ. A Series. AP300~AP500
(AWT) -fl oat nozzle S87-33086386 $12.00
WS209W2 6ø Nozzle Lower AQ330W -fl oat nozzle- $18.00WS209WS Spring Ring Lower AQ, A Series, AP300~550 (AWT)
-for fl oat nozzle-3086221 $10.00
WS210 3ø Water Nozzle
Lower A280L, 500L, AW320, AW350, L Series (AWT)
3082830 $16.00
WS007S
WS201WS202 SET
WS203 WS205
WS206 WS207
WS208 WS209
WS209L WS209W
WS209W2 WS209WS
WS210
EDM & ACCESSORIES
page 21
Connected Parts for SODICKModel Size (mm) Description Position Machine Model Original P/No. PriceWS399 Pulley B A Series - ceramic- 3051799 $291.00 WS400 25 Pulley E EPOC, BF, A Series (Manual, for AF-
Belt/SUS)3050098 $82.00
WS400C 25 Pulley E EPOC, BF, A Series (Manual, for AF-Belt/Ceramic) -w/ 2mm groove-
WS5048 Roller B BF275 $115.00 WS5051 Roller C A Series -ceramic- 3052149 $580.00 WS5053 Roller C A300. 320. 530 $97.00 WS5013 Die Block Only 3081247 $635.00WS5013SET.U Die Block Upper $1120.00WS5013SET.L Die Block Lower $1150.00WS5031 Pully V Ceramic w/
Shaft3051205 $355.00
WS5032 Pully V Ceramic Only 3051799 $260.00WS5034 72x58x25 AQ325m Ceramic Pulley Base,72x58x25mm (t) $420.00
Diamond Guide for FANUCForModel Size
(mm)Description Posi-
tionMachine Model Original P/No. Price
WF101-08WF101-10WF101-12
0.2050.2550.305
Wire Guide Upper O. P. Q. R. T. Mate. W Series (Manual)
Wire Guide Lower a -1A, 1B, 1C, iA, iB Series (AWF) A290-8110-X715A290-8110-X716A290-8110-X71724.06.230-242(NVT)
$255.00
WF113L-08WF113L-10WF113L-12
0.2050.2550.305
Wire Guide Lower For big angle a -1B (Length: 19mm) 1900648 $390.00
WF123-15 0.400 Die Guide Upper A290-8037-X645 $695.00WF124 1.0ø
30x12 Jet Nozzle Lower a -A, B, C, iA, iB Series (AWF) A290-8110-Y774 $165.00
WF125-1 1.5 Jet Nozzle Upper a -A, B, C, iA, iB Series (AWF) A290-8102-Y756 $240.00WF126-03WF126-05
0.3mm0.5mm
Sub Die Guide Upper DWC-A,B,C,iA,iB (AWF) A290-8104-X620A290-8102-X620
$250.00
WF-Y726 Sub Die Guide Upper
A290-8110-Y726 orA290-8102-Y726
$235.00
WF005
Power Feed Contact for FANUC
WF006
WF007
WF001 WF002
WF004WF003
Model Size (mm) Description Position Machine Model Original P/No. PriceWF001 25x9x10 Power Feed
ContactLower H. L. E. M. K A97L-0001-0664
/25S1P$44.00
WF002 16X6X6.3 Power Feed Contact
Lower O. P. Q. R. T. Mate. W A97L-0126-0001/15S1P
$11.00
WF003 8x4x10 Power Feed Contact
Upper & Lower
K. N. M A290-8008-X107 $13.00
WF004 16x6.3x6 Power Feed Contact
Upper & Lower
AF, W-1, 2, 3, 4 (AWF) A290-8032-Z88223.06.332(NVT)
$30.00
WF005 2.8x7.7x23 Power Feed Contact
Upper & Lower
a-0A, 0B, 1A, 1B (Manual/AWF) (polished)
A290-8101-X75023.06.331(NVT)
$10.00
WF006 4x12x23 Power Feed Contact
Upper & Lower
a-0C, 1C, iA, iB (Manual/AWF, standard type)
A290-8110-X750 $36.00
WF006L 4x12x30 Power Feed Contact
Upper & Lower
a-0C, 1C, iA, iB (Manual/AWF, long type)
A290-8110-X750 $40.00
WF007 15x6x6 Power Feed Contact
Upper W-0 A290-8048-X759 $40.00
WF201-3WF201-4WF201-5
3ø4ø5.5ø
Water Nozzle Upper & Lower
O. P. Q. R. W. T Series (Manual)
A290-8021-Y745 $11.00
WF202-3WF202-4WF202-5
3ø4ø5.5ø
Water Nozzle Lower O. P. Q. R. W. T. Mate Series (Manual)
A290-8021-Y705(Y755)
$11.00
WF204 5.5ø Water Nozzle Lower AF, W-1, 2, 3, 4 (AWF) A290-8037-X879 $10.00 WF205 5.5ø Water Nozzle Upper AF, W-1, 2, 3, 4 (AWF) A290-8032-Y611
(Y745)24.67.005(NVT)
$10.00
WF206 Nozzle Cap Upper & Lower
O. P. Q. R. T. Mate W Se-ries (for WF201/WF202, Brass)
A290-8021-V722 $60.00
WF206S Nozzle Cap Upper & Lower
O. P. Q. R. T. W Series (for WF201/WF202, Stainless)
A290-8021-V722 $75.00
WF206
WF201 WF202
WF205WF204
WF113LWF124
WF125-1
WF206S
EDM & ACCESSORIES
page 23
WF207
Flushing Cup for FANUC
WF208
WF210
WF211
WF209
WF212
WF213
WF215
WF214
WF217 WF218
Model Size (mm)
Descrip-tion
Position Machine Model Original P/No. Price
WF207 24x17x7 Water Nozzle
Lower W-0 (Manual) A290-8048-X77124.67.007(NVT)
$10.00
WF208 26x17x7 Water Nozzle
Lower W-0 (Manaul) A290-8048-X77224.67.008(NVT)
$10.00
WF209-6WF209-11
6.5ø11ø
Water Nozzle
Upper a-0A, 0B, 0C, iA, iB Series (Manual)
A290-8111-X776(A290-8109-X776 for C)A290-8101-X776A290-8101-X77724.67.010(NVT)
$14.00
WF210 16ø Nozzle Holder
Lower a-0A, 0B, 0C, iA, iB Series (Manual)
A290-8101-X75524.67.011(NVT)
$11.00
WF211 6.5ø Water Nozzle
Lower a-0A, 0B, 0C, iA, iB Series (Manual)
A290-8101-X75624.67.009(NVT)
$13.00
WF212 6.5ø Water Nozzle
Upper a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X75124.67.012(NVT)
$11.00
WF213 6.5ø Water Nozzle
Lower a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X771 $11.00
WF214 4ø Water Nozzle
Upper a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X752 (775) $14.00
WF215 4ø Water Nozzle
Lower a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X774 $14.00
WF216 12ø Water Nozzle
Upper a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X752 $13.00
WF217 12ø Water Nozzle
Lower a-1A, 1B, 1C, iA, iB Series (AWF)
A290-8102-X772 $13.00
WF218 6.5ø Water Nozzle
Upper a-0C, 1C Series (Manual)wf A290-8109-X776 $12.00
WF275 Nozzle base Upper D=58mmx19mmL-5 screw holes A290-8110-Y723 $72.00
Connected Parts for FANUCModel Size (mm) Description Position Machine Model Original P/No. PriceWF301 74.3x62.5x10 Isolator Plate Lower L, H (Manual) -ceramic- A290-8005-X722 $118.00 WF302 75x63x10 Isolator Plate Lower O, P, Q, R, T, Mate A290-8021-X709 $75.00 WF303 73x39x12 Isolator Plate Lower AF, W Series (AWT) -ceramic- A290-8032-X334 $70.00 WF304 51x33x29 Isolator Plate Upper O, P, Q, T, Mate, W A290-8021-X602 $72.00 WF305 40x40x34 Isolator Plate Upper a-A, B Series A290-8101-X509 $145.00 WF305-1 70x27x35 Isolator Plate Upper a-iB (AWF) A290-8110-X600 $159.00 WF305-2 70x27x48 Isolator Plate Upper a-B (AWF) $159.00 WF306 72øx15 Isolator Plate Lower a-A.B.C Series A290-8101-X312 $135.00 WF307 75x56x66 Isolator Plate Lower a-A, B Series A290-8101-X761 $210.00 WF307-1 76x66x56 Isolator Plate Lower a-C Series (F318) $222.00 WF307-2 81x66x56 Isolator Plate Lower a-C Series (F317) $222.00WF400 12x6x4 Bearing SS1260(Z) for WF401 & WF402 $9.00 WF401 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W
(plastic+brass)A290-8004-X713 $35.00
WF401S 49x6.5x6 Wire Roller Lower E, K, O, P, Q, T Mate, W (plastic+stainless)
A290-8004-X713-S $68.00
WF401-1 L=26 Shaft Lower E, K, O, P, Q, T Mate, W (for WF401/WF401S)
A290-8003-X254 $15.00
WF402 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+brass) A290-8006-X707 $40.00 WF402S 64x6.5x6 Wire Roller Lower L, H, M, W (plastic+stainless) A290-8006-X707-S $68.00 WF403 40x40x25 Guide Base Lower a-A.B Series (stainless) A290-8103-X762 $148.00 WF404 59.5x49x20 Guide Block A Lower a-A Series (Manual/AWF)
-stainless-A290-8110-X770 $195.00
WF404-1 38x22x12 Roller Lower a -A, B, C, iA, iB Series (Manual/AWF) -ceramic-
A290-8101-X765(A97L-0201-0369)
$105.00
WF406 40x20x18 Pinch Roller Lower a-A.B Series (Manual/AWF) -ceramic-
A290-8101-Z382A97L-0201-0369
$130.00
WF407 40x20x19 Feed Roller Lower a-A.B Series (Manual/AWF) -ceramic-
A290-8101-Z383 $140.00
WF408 57x20x20 Feed Wire Guide
Feed Section
a -A, B, C Series (Manual/AWF) -plastic-
A290-8102-X393 $122.00
WF409 138øx22 Brake Shoe Upper a-A.B.C.iA.iB Series (Manual/AWF)
A290-8101-X371 $132.00
WF409W Brake Shoe Upper O, P, Q, T, W A290-8039-V352 $129.00 WF-Y701 12 x 8mm Sapphire Roller A290-8021-Y701 $218.00
WF216
WF301 WF302
WF303WF304
WF305 WF305-1
WF305-2 WF306
WF307 WF307-1
WF307-2 WF400
WF401 WF401-1
WF401S SET WF402
WF403 WF404
WF408 WF409 WF409W
EDM & ACCESSORIES
page 24
Connected Parts for FANUC
Model Size (mm) Description Position Machine Model Original P/No. PriceWF409W0 Brake Shoe Upper W0 Series (AWF) A290-8039-V352 $129.00 WF410 40x12x30 Pinch Roller Feed
Model Size (mm) Description Position Machine Model Original P/No. PriceWH201 Water Nozzle HI-CUT 203, 304, 345, 460 $8.00 WH202 Water Nozzle HI-CUT 203, 304, 345, 460 $8.00 WH203-4WH203-6
4ø6ø
Water Nozzle Lower HI-CUT 203M, Q Series -high speed- C261C260
$20.00
WH204 Nozzle Support Lower HI-CUT 203M, Q Series (AWT) Q6205(C372) (C327)
$73.00
WH205 Nozzle Support Upper HI-CUT 203M, Q Series (AWT) Q6201(C494) $73.00
WF301 WF401C
WF402
Wire Guide for CHARMILLES
WC101
WC102
For
Model Size (mm)
Description Position Machine Model Original P/No. Price
ROBOFIL 100, 200, 330, 400, 600 (w/o fast cut); 1000, 2000, 4000, 6000 (including micro cut) (WC001 w/ Tin Coated: same conductivity with Pure Tungsten)
Model Size (mm) Description Position Machine Model Original P/No.
Price
WC201 5.5ø Water Nozzle 446.021 $15.00 WC202 ID=6.8
OD=33.5L=15.5
Water Nozzle Upper & Lower ROBOFIL 290, 300, 310, 500, 510, 1020, 2020, 2030, 4020, 4030, 6020, 6030 (United 3 parts to one nozzle: Cap with 7mm + Middle Cap + Base Nozzle)
Model Description Position Machine Model Original P/No. PriceWC 104447530 Current Transmitter Upper 104447530 $85.00 WC433310 Ground Cable for Charmilles
EDM Lower 433310 $115.00
WC432528 Machining Cable Lower for Charmilles EDM
Lower 432528 $125.00
EDM & ACCESSORIES
page 28
NW-11
NW-12N
WJ206
WJ201 WJ202
WJ205WJ203
Flushing Cup for JAPAX
Model Size (mm) Description Position Machine Model Original P/No. PriceWJ201 6ø Water Nozzle Lower LS-S, LS-X, LU, LD MGS113101 $15.00 WJ202 6ø Water Nozzle Lower LS-S, LU, LD MGS1121 $12.00 WJ203 6ø Water Nozzle Lower LS, LU, LD 111G054 $8.00 WJ205-4WJ205-5WJ205-7
4ø5ø7ø
Water Nozzle Lower LUX-3 (New Type), LV-3, LXE, EXP, LXR (Manaul), LU, LD
MGX5003 $9.00
WJ206-3WJ206-4WJ206-6WJ206-9
3ø4ø6ø9ø
Water Nozzle Upper LUX-3 (New Type), LV-3, LXE, LDM, LXR (Manual/AF), LS-A
MGX5013 $9.00
WJ207 6ø Water Nozzle Upper LXE (Manual, Old Type), LS, LD, LU, LV
Model Dimensions/Description(WxLxThickness+Height)
Max. Load
Fit to Machine Price
DV053G3 2”x4.8”x0.6”+0.12” for clamping and leveling 3.3 Lbs. All brands $138.00 DV053G5 2”x4.8”x0.6”+0.20” for clamping and leveling 3.3 Lbs. All brands $138.00 DV150G3 6”x4.8”x0.6”+0.12” two slots for clamping and leveling 8.8 Lbs. All brands $336.00 DV150G5 6”x4.8”x0.6”+0.20” two slots for clamping and leveling 8.8 Lbs. All brands $336.00 DV500G3-1 20”x3”x0.8”+0.12” (1.32”/1.52”/1.72”) 33 Lbs. Mitsubishi, Seibu $1,074.00 DV500G51-1 20”x3”x0.8”+0.20” (1.32”/1.52”/1.72”) 33 Lbs. Mitsubishi, Seibu $1,074.00 DV500F3-1 20”x3”x0.8”+0.12” (13”/17”) 33 Lbs. Fanuc $1,074.00 DV500F51-1 20”x3”x0.8”+0.20” (13”/17”) 33 Lbs. Fanuc $1,074.00 DV520F3-1 20.8”(18”)x3”x0.8”+0.12” 33 Lbs. Fanuc alpha 1C $1,074.00 DV524C05 20.8”(18”)x3”x1.0”+0.12” 33 Lbs. Fanuc $1,113.60 DV520F5-1 20.8”(18”)x3”x0.8”+0.20” increase height on both ends 33 Lbs. Fanuc alpha 1C $1,074.00 DVSX1G35 18.2”x3.7”x0.6”+0.12”+0.20” increase height on both ends 33 Lbs. Mitsubishi, Seibu $1,074.00 DV744C05 740L (600-700) x 75 x 20t + 5mm 44 Lbs. for any Wire EDM $2,280.00
M+H Model Dimension in mmd1 x d2 x hd1=OD, d2=ID, h=ht
Application Compare to Price
H34 1158/8 340 x 45.5 x 450 OE Filter Charmilles Robofi l 240/440
Charmilles-501221 & 501223 $98.35
H34 2240 340 x - x 450 OE Filter Charmilles New Generation System
Unique Long Life Filter, NW-20 Will fi t Mits platforms
$132.60
H34 1780/2 340 x - x 450 Multi Mach. Platforms Char. Mitts
Unique Long Life Filter, NW-20 Will fi t Mits platforms
$109.23
H31 967/1 302 x 29 x 507 Mitts DWC, F, G, H, C Brother Machines
NW-12N A150 or 1220B-3
$73.10
H31 1680/1 302 x - x 507 Mitts, SB, SA, SZ NW-20 A244 or 12205QC
$109.40
H34 1280/4 340 x - x 328 Multi Mach. Platforms Fanuc iB iC, char. Mitts., makino
Unique Long Life Filter NW-21, NW-21A
$93.50
H34 1158/5 340 x 45.5 x 450 Sodic, Fanuc/ Alpha NW-18H, 1318 B3 and B5Sodick HF-25, HF-25A, KH-25A
$98.35
H15 190/16*
150 x 32 x 375 OE Charmilles/ Agie Use on Wire or Sinker
NW-19, NW-11 Japax DF100 df200 614-125
$19.81
H15 475/1*
150 x 32 x 375 OE Agie Sinker Use on Wire or Sinker
Premium OE Filter DF100 DF200 614-125
$25.50
eLine*
150 x 32 x 375 Charmilles/ Agie Use on Wire or Sinker
Starting Price Point DF100 DF200 614-125
$18.11
MANN FILTER EDM FILTERS
DV053G5
DV150G5
Filter for Wire EDM/ WASHINO
Model Machine Specifi cations (QxQIxH) IN/EX Fit to Models PriceNW-24 WASHINO 260x50x400mm EX $50.00
Item No. Dimensions/Description Max. Machine Price(WxLxThickness+Height) Load Set of 2pcs
WGC-901-1 2.95”x15.4”x0.7”+0.2” 75x390x18+5mm 44.4Lbs. 20Kg Any Machine $3,000.00WGC-901-2 3.3”x20”x0.7”+0.2” 85x510x18+5mm 48.9Lbs. 22Kg Any Machine $3,000.00WGC-901-3 3.74”x25.98”x0.79”+0.2” 95x660x20+5mm 77.8Lbs. 35Kg Any Machine $3,625.00WGC-901-4 3.74”x27.56”x0.79”+0.2” 95x700x20+5mm 93.3Lbs. 42Kg Any Machine $3,625.00WGC-901-5 3.74”x29.13”x0.79”+0.2” 95x740x20+5mm 106.7Lbs. 48Kg Any Machine $3,950.00WGC-901-6 3.74”x34.64”x0.94”+0.2” 95x880x24+5mm 120Lbs. 54Kg Any Machine $6,675.00WGC-901-7 3.94”x37.8”x1.02”+0.2” 100x960x26+5mm 128.9Lbs. 58Kg Any Machine $7,375.00Application Wire EDM
GROMAX Double-sided Clamping Beam(Ruler)
Set of 2 pieces
DV520F3-1
DV524C05
eLine
EDM & ACCESSORIES
Extremely powerful and compactMade of Neody mium-Iron-Boron “Rare Earth” magnetsStrong enough to hold very large core pieces during EDM operation3/4” diameter
Neo Power Magnets for Wire EDM
MODEL Price (per box)
NPM6(box of 6) $134.00
H2O PLUS BLUE Wire EDM Corrosion Inhibitor & Cleaner
For use in Wire EDM machines to prevent undesirable corrosion of work pieces and to continuously help keep the machine clean.
Model / Regenerate Resin PriceRESINR010 1C.F. $106.00
GROMAX Adjustable Precision Vise for EDM
Features:Parallelism is within 0.00012”/3.94” (0.003mm/100mm); squareness is within 0.0002”/3.94” (0.005mm/100mm). Harden treatment is up to HRC 50°~55°. This vise can be adjusted up and down, left and right, forth and back to make parallelism. Strong clamping can stand high water pressure.
Model Description PricePV320 Stainless Vise $3300.00
Top View
GROMAX Stainless ViseGood for Small Hole EDM!!
VST10
GROMAX Stainless Vise 1” & 3”
Squareness and parallelism within 0.0002”. Material: 440 stainless steel. Hardness: HRC 56°
Squareness and parallelism within 0.0002”. Material: 440 stainless steel. Hardness: HRC 56°
VST25
page 32
EDM & ACCESSORIES
Wire for Japanese Models (P Series)ZINC Coated Hard Wire
Brass Hard Wire
ZINC Coated Soft Wire
Brass Soft Wire
Spool Type Dia. Model Model Model Model Price/Lbs.Quantity of Order (Spool)P-1R 0.10mm (0.004”) ZP0110 BP0110 BP0110S $Call(3.3 Lbs./1.5 Kg) 0.15mm (0.006”) ZP0115 BP0115 BP0115 S $CallQuantity of Order (Spool)P-3R 0.10mm (0.004”) ZP0310 BP0310 BP0310S $Call(6.6 Lbs./3 Kg) 0.15mm (0.006”) ZP0315 BP0315 BP0315S $Call
Wire for European Models (DIN Series)ZINC Coated Hard Wire
BRASS Hard Wire
ZINC Coated Soft Wire
BRASS Soft Wire
Spool Type Dia. Model Model Model Model Price/Lbs.Quantity of Order (Spool) 30 and upDIN125 0.10mm (0.004”) ZD1210 BD1210 ZD1210S BD1210S $Call(7.7 Lbs./3.5 Kg) 0.15mm (0.006”) ZD1215 BD1215 ZD1215S BD1215S $Call
(A) Orbit-Cut Head Specifi cationFeature Suitable for any EDMMax. Electrode Wt. 33 LBS.Size (LxWxH) 7.87” x 7.87” x 8.66”Weight 30 LBS.X, Y Travel ± 0.1968”Repeat Accuracy 0.00039”
EDM & ACCESSORIES
This part can be replaced by 3R or EROWA Tool-ing system
Electrode Holders EHV10 with 3R Reference Element
Features:Can be attached on to 3R Chuck;Vise mounted on 3R Reference Element (54x54mm).
Model Length Width JawOpening
JawHt.
WT.lbs
Price
EHV10 3 15/16” 2 3/16” 1 1/4” 1” 4.0 $495.00
Features:Can be attached on to 3R Mini Block & other tooling;1” mini vise can be mounted horizon-tally or vertically for diff erent needs;HRC 60
Features:Faster fi nishing rates, Pure synthetic product eliminates frequent oil changes Eliminates DC arcing & dead zonesEnds Skin Irritation No hazardous ingredients - safe for environment and your skin99.99% Odorless Reduce Electrode Wear Increase Metal Removal Rate of 15% Reduces electrode wear up to 30%Improve Surface Quality.
ID 21/8” 11/4”OD 6” 6”Height 18” 14”Price $35.00 $35.00FLT-FT FLT-SUTE
page 34
• Touch pad control • Automatic release cycle
Manual Release Control• Maximum reliability • Conveniently located control dial and switch • 0-100% variable holding power adjustment• Easily mounted with exter-nal tab
Input 115VAC/ Output 0-110VDC
Model Watt. Wt PriceSCV-1.5 150 10lbs $480.00
Input 115VAC/ Output 0-110VDC
Automatic Release Control
Features:Full magnetic surface to all edges Fine pole divisionsSolid construc-tion top plate Lowest height of any perma-nent chuck Can be used inverted for holding elec-trode ramAccurate re-peatability
O.S. WALKER Fine Division Long Bar Pole Electromagnetic Chuck
O.S. WALKER Ceramax Permanent Magnetic Chuck
Features:Full magnetic surface to all edges - powerful holding over entire chuck surface Fine pole divisions Simple and inexpensive tooling designs Solid construction top plate Lowest height of any electric chuck Magnetic fi eld does not aff ect EDM operation No complicated set-ups Accurate repeatability
Features:• Hardened & ground to assure maximum accuracy. • Concentricity 0.0004” at 2” from collet
Oil Proof Type
GROMAX Permanent Magnetic Chuck for EDM and Surface Grinder
Features:• Micro pitch pole spacing• Low profi le & strong rare-earth magnet• Variable holding position with removable on/off activation handle• Thin & light weight work piece are ideally suit-able because of fi ne-pitched magnetic poles
KRTW Series 10 Pole per inchOil-proof type is specially designed for EDM
EDMLow Profi le
Oil Proof Nominal Dimension
Wt.LBS
Model Price Model Price
3”X5” 7 RMWH-713C $500.004” X 7” 12 KRTW1018A $530.00 RMWH-1018C $880.004”X10” 18 RMWH-1025C $1,100.004”X12” 21 RMWH-1030C $1,160.005”X10” 22 RMWH-1325C $1,200.006” X 6” 15 KRTW1515A $630.00 RMWH-1515C $1,230.006” X 12” 31 KRTW1530A $930.00 RMWH-1530C $1,300.006” X 14” 35 KRTW1535A $1,310.00 RMWH-1535C $1,525.006” X 16” 40 KRTW1540A $1,390.00 6” X 18” 46 KRTW1545A $1,390.00 RMWH-1545C $1,900.008” X 14” 49 KRTW2035A $1,490.00 RMWH-2035C $2,100.008” X 16” 55 KRTW2040A $1,790.00 RMWH-2040C $2,300.008” X 18” 70 KRTW2045A $1,95000 8” X 20” 77 KRTW2050A $2,350.00 RMWH-2050C $3,200.008” X 24” 93 KRTW2060A $2,390.00 RMWH-2060C $3,400.0010” X 10” 48 KRTW2525A $1,385.00 RMWH-2525C $2,400.0010” X 12” 59 KRTW2530A $1,625.00 RMWH-2530C $2,800.0012” X 20” 117 KRTW3050A $3,380.00 RMWH-3050C $3,800.0012” X 24” 139 KRTW3060A $3,350.00 RMWH-3060C $4,450.00
Double-Face Attracting Permanent Magnetic Chuck [Model: RMWH-2F]
Features:• Magnetic force of work face (top) and mounting face (bottom) is controlled individually with the removable ON/OFF handle.• Constructed for water proff ness.• Precision: Flatness in 0.0006” (0.015mm), Parallelism in 0.0012” (0.03mm)
RMWH-3060A ShownMicropitch Permanent Magneic chuck(Ultra thin chuck only 1.77” thick)
KRTW: Fine pole Permanent Magnetic ChuckRMWH: Micropitch Permanent Magneic Chuck
EDM & ACCESSORIES
page 35
Manual C-Axis Mini Chuck
For mounting on the machine spindle with the aid of universal adapter plate, 3R-A3620.
• Quick and exact mounting of electrode with accuracy of repetition inch/mm: 0.000078”/ 0.002 mm• Indexing 24x15°. Intermediate angle set with Vernier scale• Connection for pressure/ suction fl ushing through the electrode• Hydraulic clamping of electrode
Model Price 3R-321.65 $call3R-A3620 $825.00
Manual Mini ChuckFor mounting on the machine spindle with the aid of univer-sal adapter plate, 3R-A3620.
• Quick and exact mounting of electrode with accuracy of repetition inch/mm: 0.000078”/ 0.002 mm• Indexing 4x90°. Intermediate angle set with Vernier scale• Connection for pressure/suction fl ushing through the electrode• Hydraulic clamping of electrode
Model Price 3R-321.5 $1,975.003R-A3620 $825.00
Model Price 3R-321.2-4x90 $1,940.00
Manual Chuck 4x90°Designed for use in turning electrodes. Comes with set screws for mounting on a lathe taper and centering adjustment. Electrode can be indexed 4x90°
Model Price 3R-321.46 $2,450.00
Mini Block
Manual chuck for vertical or horizontal mounting on machine table. Electrode can be indexed 4x90°
3R Starter Kits
Model Price per set
3R-322/50S (set of 30) $635.003R-322/50E (set of 30) $800.00Quality imiport2050 (set of 10) $88.002050E (set of 30) $248.00
EDM Electrode Shanks
Electrode Holder with 50 mm long, unhardened electrode-mounting part
322/50S
322/50E
EDM & ACCESSORIES
Precision Punch Former Stainless . Water Proof
PFH350 One Way* Through Hole Design$4300.00
PFH450 Two WaySlide Plate Design$4720.00
Center Height:85+0.5mm Clamping Dia Range of V-Block: 3-38mmTravel of V-Block: 30mm Indexer tooth qty & accuracy: 24, 150+5”Through hole dia: 36mm Clamping Accuracy (50mm): 0.005mm
Center Height:85+0.5mm Clamping Dia Range of V-Block: 3-38mmTravel of V-Block: 38mm Indexer tooth qty & accuracy: 24, 150+5”Slide Plate Horizontal movement: +18mm Clamping Accuracy (50mm): 0.005mm
3R-468.31-S is a tooling kit for theMacroJunior and Macro tooling system.The chuck is designed for permanentmounting on machine ́s table.
• Solid xy-refs.• Recommended clamping torque: 4 Nm• Clamping force: 5000 N• Permissible torque: 125 Nm• Included screws, not on display
3R-628.31-S is a tooling kit for the Macrotooling system.The chuck is designed for permanentmounting on machine ́s table.Torque wrench is recommended.
Standard Equipment and tool cabinet:With the standard equipment alone, G40 is capable of grinding the following cut-ters; plain milling cutters, end mills, shell end mills, groove milling cutters, key way milling cutters, angular milling cutter, face mills (max. 8” dia) (200 mm), circular saws (max. 48” dia. ) (1200 mm), taps and Reamers.
GROMAX Universal Cutter & Tool Grinder
Model PriceG40 $ $24,750.00
Please visit www.gromaxonline.com for more parts list.
CapacityLongitudinal movement of table 15.7”Distance between center 27.5”Cross movement of saddle 9.8”Workhead taper MT # 5 NT50 or BT50TableT-slot 0.59”
(+0.0019” ~ +0.0039”)Table working range 5.47” x 37”Wheel speed 2600, 3700,
6200 rpmWheel motor 1.5 HP (1.1kW)Range of MovementRotative angle of table ±60°Jog adjustment of table ±10°Vertical movement of wheelhead 9.8”Slope of wheelhead ±15°Rotative angle of wheelhead 360°Distance between center of spindle and table
Max. 11.8” min. 1.96”
Distance between center of spindle and T-slot
Max. 16.3” min. 6.5”
DimensionFloor space 61” x 68” x 58”Net weight 2,560 lbs
Standard AccessoriesWork headLeft-hand & right-hand tailstockDiamond dresser holderWheel guardsWheel guard holders, long & shortUniversal tooth rest plate and blade holder extensionCenter gaugeCollet wrenchPlain tooth rest holder, with off set bladeEjector rodT-wrench for grinding wheel sleeveSleeve extracting barPin wrenchMicrometer adjustable toothrest, with round top bladeLeveling pads, 3 pcTouch-up paintPlain tooth rest holder, with off set bladeReducing collet b & s no. 12 x no. 10, or mt no. 5 x no. 4Reducing collet b & s no. 12 x no. 9, or mt no. 5 x no. 3Reducing collet b & s no. 12 x no. 7, or mt no. 5 x no. 2Grinding wheel sleeves, 5 setsGrinding wheels (6” x 3/4” x 1-1/4”, 6” x 1/2” x 1-1/4”[two], 3-1/2” x 1-1/2” x 1-1/4”, 4” x 1/16” x 1/2”, 5” x 1-1/2” x 1-1/4” & 3” x 1/2” x 1/2”)Double end wrench, nut wrench & allen wrenchSpacer for 1/8” dia. Grinding wheelCenter for workhead spindle b & s no. 7 (or m.t. #2)4” spindle extension4” extension wheel sleeve and collarBelt for spindle drive (poly-fl ex belt)Draw-in bolt for workhead and washerTool cabinetExtension and washers of slit-saw and side-mill cutters
Made in
Taiwan
GROMAX Cutter & Tool Grinder (Monaset)Features:With the combination of swiveling turntable and moveable off set slide provide versatile capability to be quickly set up. The grinder can ac-curately generate convex and concave radii of various sizes.
Model PriceMN2 $ $29,900.00
with collet
CapacityWorkhead
Swing over main slide, dia 12” (max)Collet work dia 1.25” (max)Collet work dia 0.19” (min)
Spiral angle 60° (max)Distance between speak of spindle 3.93” (max)Distance between center of tailstock 5.98” (max)Grinding wheel head Grinding diameter 3.93” (max)RangeWorkhead Slide travel 5.11”Off set slide travel 3.93Front of center 1.96”Rear of center 1.96”Angle adjustment of workhead Rotation of horizontal plane ±105° (210°)Rotational of vertical plane ±40°Grinding wheelhead Slide travel 4.33”Vertical slide travel, total 9.44”Above center 4.33”Below center 5.11”Cross slide travel 6.7”Front of center 2.75”Rear of center 3.93”Spindle SpeedWorkhead speed 360 rpmWheelhead, three speeds 4000, 6000
8000 rpmMotorWorkhead, AC 1/4 HPGrinding wheelhead, AC 1/2 HPDimensionFloor space 65” x 45” x 60”Net weight 1895 lbs
Standard AccessoriesWheelhead toothrest assembly with extension barGrinding wheel guards with extension barFront stock supportStraight cylindrical collectsSet of (5) grinding wheel fl anges. (4) standard and (1) exten-sion fl angeDiamond holder bracketWrench for workheadToothrest entering gaugeAdjustable tailstock support unitSpanner for grinding wheelLeveling blocksStandard arborScrew driverSet of wrenchesDouble-end spannerSet of (4) index plates for spiral lead Machanism 0,8,10 &12 divisionsTool boxOil bottleGrinding wheel (one each of straight, fl aring cup and dish shape)
Additional diamond truing tool with diamond nibSpring-loaded index pawl for workhead1/2” wheel fl ange and spanner
Features: Machine structure: Body made of Meehanite casting with honey-comb ribs providing extra rigidityWorkhead: "swiveled 30° clockwise, 90° counter clockwise" Equipped with angular contact ball bearingsWheelhead: equipped with auto lube system to ensure accuracy and spindle lifeAccuracy: Repeatability 0.00005" Positioning 0.00005"Swivel headstockLever operator tailstockTable swivel with dial indicator for taper grindingCoolant tank with splash guardsWheel fl ange & extractorAutomatic lubrication systemWheel dresser
Automatic grinding cycle, rapid wheelhead approach and retraction, automatic coarse, fi ne feed, spark-out, wheelhead retract all in one setting! Suitable for plunge, traverse, and taper grinding.
H: Hydraulic table. Rapid approach & retractionAGC: Hydraulic table. Rapid approach & retraction,Automatic grinding cycle features coarse, fi ne feed and spark-out all in one setting. Suitable for plunge, traverse and taper grinding.
JMC600AGC shown
Specifi cation:JMC400
Capacity Distance between centers 16”Max. revolving diameter over bedHydraulic tank-capacity 13.75 GalCoolant tank capacity 19 Gal
Wheel drive motor 3 HPWorkhead spindle motor 1/2 HPHydraulic pump motor 1 HPWheel spindle lubricator motor 1/4 HPCoolant pump motor 1/8 HPSlide way lubricator motor 1/8 HPFloor space 87” x 71”x71”Net weight 3960 Lbs.
Model PriceJMC400AGC $55,000.00
Optional Accessories: For JMC400Internal Grinding Attachment jmc400.1 $5,841.00 3-point Steady Rest jmc400.2 $671.00 2-point Steady Rest jmc400.3 $556.60 2-point heavy load rest (a couple) NA -
Features:Over sized wheelsFiltrate ferrous & non-ferrous solid content30micron paper fi lterMotor wired 220V or 440V / 3 phaseExcellent for manual or CNC grinders
Extra paper fi lter $98.00 per roll(WxL) 20”x3600” appro.Buy 3 rolls or more and receive 10% discount!
The coolant system has three divisions: 1) Upper Division is the paper room and the inlet water tank and magnetic separa-tor are located in it. The paper fi lter is in 2) Middle Division to collet the dirt from grinding. And 3) Lower Division with drainer supplies clean coolant to the workpiece.The coolant will fl ow to the water tank when it cycles from the machine. Then it goes into the magnetic separator and automatic paper fi lter and leads to the lower division, the water tank.
W H1 H2 Pump(in.) (in.) (in.) HP outlet15.7 11.8 26.4 1/8 PF11/2”
GTM.MMotor for GTM$125.00
Magnetic Separator & Coolant System
GROMAXPrecision Electrode FormerFC750 with 3R Manual Chuck (3R-600.23-S)
Model PriceFC750 $3,894.00Weight 16 lbs
Features:• One piece body construction;• Hardened tool steel throughout;• 3R Manual Chuck 3R-600.28-S in places;• Revolving type handle for easy rotation.
Super high quality!!
GROMAX Rectangular Type Permanent Magnetic Chuck
Features:Rectangular type most suitable for grinding operation; Easy to operate handle; Clamping logs are provided; Handle can pivot outward appro. 30o; Magnetic eff ective area expanded
KANETEC 3 Face Attractive Permanent Magnetic Mini Chuck
KANETEC Magnetic V-Block
KMV-125 SHOWN
MMW-3F70A SHOWN
page 41
Magnetic V-BlockApplication:Suitable to hold round steel for precisionwork in measuring, marking and grindingFeatures:• Two pieces fi nished to the same dimension are fi nished together for a set• Finished in both standard and special class precisions• ON/OFF switch makes it easy to operate and remove the block
V-Block ViseV-Block Vise available in the following sizes:
Model capacity PriceV-Mark III ALP.3 1/16” to 11/16” dia. $160.00V-Mark IV ALP.4 1/16” to 11/8” dia. $195.00V-Mark V ALP.5 11/2” to 31/2” dia. $865.00
5 Cluster V-Block
4 Cluster V-BlockALP5.6 $420.00
Cluster V-Block Vise four positionCapacity 1/16” to 11/8” dia. Also available in stainless steelSquareness and parallelism accuracy: 0.0002”L: 63/4” W: 21/4” H: 21/4”
Cluster V-Block Vise fi ve positionCapacity 1/16” to 11/16” dia. Also available in stainless steelSquareness and parallelism accuracy: 0.0002”L: 51/2” W: 13/4” H: 13/4”
Right-On Pin GrinderHolds and positions pins of diameters from 1/16” to 3/4” for cut off and grinding purposes.Grinding chatter is eliminated because of the fi rm 11/4” of linear pin grip. It is fast to use in either a horizontal or vertical position with the same ease and repeatability. This 3 point pressure system not only allows for better pin grip but also gives a straight in-line positioning method.
ALP4.7 $510.00ALP4.7S $960.00 (Stainless)
ALP.PRG $495.00
Specifi cation:Collet 5C up to 1”Center Height 4 1/8”24 division indexing +/- 30 secondsSpindle runout 0.0001”
Features:Sturdy and dimensionally stable cast iron housingLarge preloaded ball bearings are durable and accurate - ideal for motorization5C collet holder ground in assembly to under 0.0001” runout24 division index plate with precision index pin locks in every 15 degrees to ± 30 sec.Draw sleeve for quick setup of collets and accessoriesExtended base for minimal defl ection even with heavier parts 1/4" diameter mounting hole on top of housing for diamond dresserMounting holes on base of unit for use with Harig accessoriesCrank handle easily removed for motorized setupUnique design allows for mounting of variable speed motor in forward or rearward positionFull repair service and replacement parts available
HARIG Spin-Indexer
Model Price120-100 (Motorized)$1,746.00
Suburban Magna-SquareFeatures:A versatile tool for layout, inspection and squaring operations on a surface grinderCombines the advantages of a Universal Right Angle Iron and a Permanent Magnetic ChuckEnergize magnetic face by turning recessed control barCan be placed on any side for work-holdingHeavy support rib provides structural strength and a carrying handleMade from class 40 cast iron, stress relieved and annealedTolerance: all faces and ends of the Magna-Square and ground fl at, square and parallel within 0.0003”
HARIG HO-VEE System
Spindle parallel to base 0.0002” in 6”Motor 1/15 horsepower 110VACWeight 17 Lbs
Features:Harig precise adjustable riser v-block system plus traveling height gage off ers numerous workholding applications. Use with the Basic V-Block to hold workpiece securely and accurately. Use with a Multi-6 V-Block for end fi nishing of punches, core pins, plugs and EDM electrodes. Standard 8” posts with 5” width included.
Features:6”x2”x1 3/4” heightHas 6 V’s with 1/2” diameter capacityCenters of V’s : 0.875 apartFor end fi nishing of multiple partsCan be used vertically or horizontally as a stand aloneHardened and ground to “tenths” accuracy
Features:V-Block capacity holds parts up to 1” in diameterQuick setupIncludes strap clampHardened and ground to “tenths” accuracy
Chuck Controller (for Rectify & Demagnetize)GRD-505 Features:• Suitable for standard type of electric magnetic chucks.• With current capacity of 5A; demagnetizing time is 6-15 seconds.• Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage.• Suitable for any kind of electric magnetic chucks.
GRD-510/515 Features:• Suitable for standard type of electric magnetic chucks.• With current capacity of 10A and 15A; demagnetizing time is 6-15 seconds.• Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage and current.• Suitable for any kind of electric magnetic chucks.
GRD-520 Features:• Suitable for super powerful type of big electric magnetic chucks and could control 2 chucks at the same time.• With current capacity of 20A; demagnetizing time is 8-15 seconds.• Precisely adjust the magnetic force of electric magnetic chucks and indicate LED voltage and current.• Attached fan inside for emitting heat.• Suitable for any kind of electric magnetic chucks.
GRD-510/515
GRD-520
KANETEC Electro Magnetic Chucks
Model Nominal Dim.
Watt Price
KESL1020 4” X 8” 26 Discontinued
KESL1025 4” X 10” 30 Discontinued
KESL1325 5” X 10” 28 Discontinued
KESL1525 6” X 10” 42 $560.00KESL1530 6” X 12” 45 $1,560.00KESL1535 6” X 14” 60 $1,590.00KESL1540 6” X 16” 66 $1,640.00KESL1545 6” X 18” 69 $1,690.00KESL2040 8” X 16” 80 $1,800.00KESL2045 8” X 18” 104 $1,900.00KESL2050 8” X 20” 127 $2,010.00KESL2060 8” X 24” 151 $2,540.00
Model Nominal Dim.
Watt Price
KESL2540 10” X 16” 115 Discontinued
KESL2545 10” X 18” 127 Discontinued
KESL2550 10” X 20” 153 $2,860.00KESL3060 12” X 24” 175 $2,940.00KESL3070 12” X 28” 183 $3,300.00KESL3090 12” X 36” 273 $3,900.00KESL4060 16” X 24” 233 $4,000.00KESL4065 16” X 26” 253 $4,100.00KESL4080 16” X 32” 311 $4,800.00KESL40100 16” X 40” 400 $6,800.00KESL4570 18” X 28” 310 Discontinued
KESL50100 20” X 40” 575 $7,000.00
Horizontal pitch type(Can use with GRD-505 chuck controller)
Model Input Voltage(single phase)
Output Dimension (inch) NetWt. lbs
PriceVoltage Current L W H
GRD-505 AC 110/220V DC 0-100V 5A 7.87 5.39 4.80 8.00 $380GRD-510 AC 110/220/
Micropitch for small and thin works.Pole Pitch: 4mm (1+3)
E
GRINDER & ACCESSORIES
Features: Standard pole- 1/4" poles & 1/8" separators produce deep fl ux lines for holding large and thick parts Use max-c-mag ceramic magnets provide 3 times the holding power of ordinary magnets Fine pole - 1/8" poles & 1/8" separators produce shallow fl ux lines for holding small and thin parts
Features:• Fixed focus lens (3X)• 1 Vernier markings for dressing angle• Magnifi cation through hole in the spindle makes it possible for operator to see how to dress the form on the wheel• Accuracy Within 0.0002”
GROMAX Chamfering & Deburring MachineFeatures:• Simplifi ed operation• Easy to be bevelled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic, etc.
GT-600A: Can debur both soft and rigid materials with sand cloth roller
GT-500A: With exchangeable carbide inserts makes cutting tools can be changed easily
GT-500B: Can bevel or chamfer on tapered wheel and fl ange heat treated parts
GT-500BR:The deburring pro-cessing is based on the principles of surface milling machine. The fi nish of the deburred surfaceis like the work-piece fi nishof the surface mill
SDK.GXX Extra Sanding Disc$15.00 Ea.Grits: 24,36,40,50,60,80,120Receive 10% discountwhen order 10 or more
Space Requirement 19.7”x12.6”Weight 66.1 Lbs.Voltage 3 220V or 1 110V/220V
50Hz/60HzMotor Output 1 HPSpeed 3500 rpmLength of Guide Rails 19.7”Height of Bevel 0~0.12”Bevel Angle 15°~45°
changeablePrice $980.00
NNENENEN WW! !!!!!!!!!!!!!!!
C&R Chamfering MachineCorner and Radius camfering
GRINDER & ACCESSORIES
Wheel Parallel Dresser E250
E300
Stroke:2.36”
E500 Circular housing ID: 3.66”, Length: 4.33”
Model Weight PriceE250 18Lbs $415.00
Stroke:1.38”
E300.DS Dresser Stick for E300 $190.00
Model Weight PriceE500 25Lbs $595.00E500=E250 + Circular Housing
Model Weight PriceE300 38Lbs $630.00
E250.DS Dresser Stick for E250 $170.00
Specifi cation:Extremely accurate: dress 2 angles tangent to a radius in one continuous motion to within 0.0001”Fast and easy setups: only tools needed are a micrometer and a wrenchSetup to dress 2 angles takes less than 15 seconds. 1 radius plus 2 angles in about 3 minutesDressing capacity up to 8” wheelRange of convex radii 0 ~ 1.500” concave radii 0.030” ~ 1.500”Made of hardened & ground tool steelHeight to center of diamond 6 1/2”Overall height: 7”Base dimensions: 4 3/4” x 3 1/2” x 1 1/4”Weight: 20 Lbs With a micrometer feed 1 3/16” (38mm) travel.
These are some of the forms obtainable withfl uid motion dresser
Features:Dress Both Sides Of A Grinding Wheel Pre-cisely & Simultaneously.; Made Of Hardened Tool Steel HRC 60.
Model PriceTDD $480.00Diamond dresser1/4"x2"/ .2CT DS-030 $13.00
GRIND WHEEL MIN. MAX.
0.2mm 40mm 0.02mm/DIV
Model: TDC-TW
page 44
ER Collet Dividing Punch GrinderFeatures:• Having a ER32 as a main body, the ER Collet Dividing Punch Grinder has total of 7 collets from 0.16”, 0.24”, 0.31”, 0.39”, 0.47”, 0.63”, 0.79”. • With 24 divisions, this punch grinder allows positioning in every 15°10 seconds accuracy.• If processing is below 0.24”, use the ER16 connection. The collets are from dia. 0.04” to 0.39”.
L X W X H: 4.33” X 3.27” X 2.16”Center to center: 2”
N.W. 6.61 lbs.
Model Weight PriceFC350-ER 23 Lbs. $920.00(include 7 collets)
Model PriceFC350-SP $180.00
N.W. 29.76 lbs.
Model PriceFC350-SER $1045.00
Angle Dresser
FC350/450 Features:• One piece body construction• Hardened tool steel throughout• Single screw locks v-block in places• Revolving type handle for easy rotation• Concave & convex radius angular dressing of grinding wheels
GROMAX Punch Formers
FC-350shown
Standard Accessories:• Dresser Arm• Allen Keys• Fitted Case
FC-350 with 30mm (1.18”)through hole
FC-450 with oscillatingv-block for tangentdressing
Model Wt. PriceFC-450 24Lbs $1,450.00FC-350 23Lbs $1,250.00PF-350 Fine Tune $1,550.00PF-450 Fine Tune $2,010.00PF500 60Lbs $5,250.00
FC-450shown
Specifi cations: FC-350 / FC-450Max. Diameter Workpiece 1-1/4”Height To Center line 3”Dial Graduations 360o in 1o IncrementsIndex Plate 24 DivisionsV-Block Capacity 1 1/4”Roundness 0.0001”Parallelism & Squareness 0.0002” in 2”Hardness HRC 60o
PF500(FC-900)shown
Specifi cations: PF500Max. Clamping Dia. in V-Slot
2-3/4”
Travel of V-Block 1-3/8”Quantity of Tooth 24Accuracy of Disk 15°5”
Accuracy within0.0002”SatisfactionGuarantee
Excellent Quality withAff ordable Price!
Big Punch FormerFC-900 Features:• Adaptable on surface grinder above 1.27 in2 to clamp punches within 2-3/4” for grinding various shapes• V-block with fi ne tuning function can fi x workpieces steadily and accurately• Max. clamping dia. is 2-3/4”
• The base can be selected as a sine plate base. It is good for sine angle use.
GROMAX Grade Sine PlateFeatures:Made of hardened tool steel HRC 55~62; Roll to eliminate step in base plate; Two hardened & ground side rails & one locking strap included; Locking strap remains below the top surface; Tapped holes in top plate; Parallelism & squarenesswithin 0.0002” 0°~60° capacity.(GT-66 With T-Slots)
Features:Compound angles easily and quickly set.; Adjustments up to 46 degrees. The vise parallelprecision 0.0002” and vertical angles in 0.0008”; Between centers equal 5 inch
Features:Revolving 360° in horizontal plane and 45° in vertical plane;Aadaptable to precision grinding machine and boring machine for level and inclined face machining as well as boring at a certain degree of inclination;precision graduation for accurate reading
Specifi cations:Width of jaw 2.75”Max. opening of jaws 3.16”Depth of jaw 1.18”Overall dimensions 7.7”x4.0”x5.8” (LxWxH)Weight 28 Lbs.
Model PriceGTV-2000 $790.00
GROMAX 0°~60° Angle PlateFeatures:0°~60° adjustable angle by locking the hex screw on the bottom; Squareness 0.0002"; Angle accuracy 10"; HRC50~55°
GROMAX Magnetic Angle PlateFeatures:Easy to use (like a dine plate) On EDM grinders, mills and drills0-500 adjustable angleDimension LxWxH (3.5”x4.0”x1.8”)
Model Wt PriceMAP 8Lbs $139.00 Model: MAP
GRINDER & ACCESSORIES
Model PriceSV-20 $245.00SV-30 $315.00
page 45
Center Punch Former
GRINDER & ACCESSORIES
Precision Air Grinder
• With ER Collets, the fl exible range of collet is 1 mm.• Clamping under 4 mm apply ER16 Collet.• PFDM can rapidly clamp the workpiece and achieving higher stability during processing, no need to adjust the center accuracy.• This model is compatible with various ER collets such as ER16, ER32, ER40 etc…
GROMAX Motor ER Collet Punch Formers• PF650M has stronger structure leading lasting durability.• Motorized function prevent human fatigue when processing• With ER collets, the fl exible range of collet is 1mm• Capable collet clamping range: Min Dia. 2mm, Max. Dia. 26mm• PF650 can rapidly clamping the work piece and achieving higher stabil-ity during processing, no need to adjust the center accuracy.• Adopting high precision doubl e bearings in it’s structure to achieve higher accuracy, rigidity and stability.• This model is compatible with various ER collets such as ER20, ER32, ER40 etc…
• Center Height without base: 85mm• Center height with base: 109mm• Indexer tooth quantity & accuracy: 24,150+10”• Live Center clamping range: 0-450mm• Material SKS3, HRC60-62• Roundness: 0.002mm• Parallelism: 0.002mm/ 100mm• Squareness: 0.002mm/ 100mm• Angle: 3600
Unit: mmAngle:3600 Hole dia of 3 Jaw Chuck : 16mmOD Range: 2-70 Diameter of 3 Jaw Chuck: 85mm ID Range: 24-64 Clamping Range of 3 Jaw Chuck: 1 - 82mm
• Center Height without base: 85mm• Center height with base: 109mm• Indexer tooth quantity & accuracy: 24,150+10”• Live Center clamping range: 0-450mm• Material SKS3, HRC60-62• Roundness: 0.002mm• Parallelism: 0.002mm/ 100mm• Squareness: 0.002mm/ 100mm• Angle: 3600
page 46
Model Electric Motor CFM Free Air at 10”hg at 20”hg
Model Wt PriceVCP-14-MM 32 $890.00 VCP-34-MM 54 $1386.00
Optional Accessories: Vacuum Pumps
Vacuum Chuck
Model PriceCM-5C $1419.00
Optional Accessories:Face plate & V-Block
Model Wt. PriceCM-5C-FVB 15 Lbs $670.00Specifi cation:
Face Plate Diameter: 6-1/2”V-Block Capacity1-3/8” dia
Specifi cation:Collet V-Block Through Heightcapacity capacity hole Base to center lineany 5 C 1-5/8”dia 1-1/4” dia 3”
Model PriceMG-5CV-S1 $3,114.00
Master-Grind Index Fixture
Optional Accessories:MG5-MD motor drive 1/15 HP, reversible, variable speed, 60 to 300 rpm.; Comes with mounting bracket motor pulley, drive belt & screws;can be mounted on either side of the index fi xture.
Model Price
MG5-MD $974.00
Rear View
Front-view w/ V-Block
Front view w/o V-block
Model L W H Recomm.Pump
Wt Price
VC-66-S1 6 6 2-1/4” 1/4 HP 15 $784.00 VC-612-S2 12 6 2-1/4” 1/2 HP 28 $1,071.00VC-618-S2 18 6 2-1/4” 1/2 HP 41 $1,422.00
Collet-Master Index Fixture
GRINDER & ACCESSORIES
Suburban ToolThrough Hole: 1-1/8” Dia
Height:Base to Center line3-5/8”
Wt: 9 Lbs
22 Lbs
Made from steel hardened up to 58-62Movable jaw pulls into base at 45 - 60 deg.
Sine Vise
Model Dimensions Jaw Cap.
Center Distance of Rolls
Price
SV-337 7-1/2”x3”x3-5/8” 4-3/4” 5” ± .0002” $997.00SV-337-S1 7-1/2”x3”x3-5/8” 4-3/4” 5” ± .0002” $1,041.00SV-411 11”x4”x4-5/8” 7” 10” ± .0002” $1,628.00SV-411-S2 11”x4”x4-5/8” 7” 10” ± .0002” $1,687.00SV-612 12”x6”x5-1/8” 8” 10” ± .0002” $2,790.00SV-612-S2 12”x6”x5-1/8” 8” 10” ± .0002” $2,880.00*S1 & S2 mean they are SineSet compatible, others are not
V-411-NC &V-612-NC Viseshown
Precision ViseV-411-S2 Shown
Precision Vise & NC Vise
Model Dimensions Capacity PriceV-225 5-5/8” x 2” x 2” 3-1/4” $476.00V-225-S0 5-5/8” x 2” x 2” 3-1/4” $550.00V-237 7-1/2” x 3” x 2-5/8” 4-3/4” $609.00V-237-J 7-1/2” x 3” x 2-5/8” 5” $683.00V-237-J-S1 7-1/2” x 3” x 2-5/8” 5” $735.00V-237-S1 7-1/2” x 3” x 2-5/8” 4-3/4” $682.00V-411 11”x 4” x 3” 7” $1,060.00V-411-S2 11”x 4” x 3” 7” $1,123.00V-612 12”x 6” x 3-7/16” 8” $1,575.00V-612-S2 12”x 6” x 3-7/16” 8” $1,698.00Precision NC Vices & Matched PairsV-411-NC 11” x 4” x 3” 7-1/2” $1,266.00V-411-NC-M 11” x 4” x 3” 7-1/2” $2,797.00V-612-NC 12” x 6” x 3-7/16” 8-1/2” $1,794.00V-612-NC-M 12” x 6” x 3-7/16” 8-1/2” $3,993.00*S0, S1, S2 denote SineSet Compatible
GROMAX Precision Mini Tilt & Swivel Vise
Features:Vise furnished complete with jig plate, which can be removed for grinding and milling. In addition, the swivel angle attachment may be removed for using as a plain vise.; Ideal for jig boring, jig grinding, precision grinding as well as milling and drilling operations. Tolerance: 0.0004” graduation are furnished on both tilting and swiveling Model Wt. Price
Matco Sine DresserFeatures: Sine angle absolutely accurate• This fi ne precision -made unit dresses grinding wheels to any angle from 0 ~ 60 degrees with new smoothness and accuracy• Center to center is 2”• Center tolerance is 0.0004”• Max. cross feed is 1 3/16”
Model Wt Price50A 4Lbs $189.00
page 47
7-11/16”
11-1/32”
9-1/16”
11-1/32”
11-13/16”
Model Wt. PricePGS 6Lbs $480.00
Specifi cations:Unit size (WxLxH) (Lever excluded) 6-7/8”x10-3/16”x2-9/16”Mounting surface (RL x FB) (6-7/8”) x (3-9/16”)Capacity of head 1-3/4” max.Roller speed 60 HzRoller driving motor 110V/single phase/25WAccuracy/roundness/concentricity 0.00008”
Features:Same principle, same ac-curacy (0.0002” guarantee). The Mini-Type Punch Grind-er is designed especially for tiny punch operation.
GROMAX 1” Tool Makers Vise
Model VIMaterial SK2Length 2-9/16”Width 1”Jaw opening 13/16”Jaw height 3/8”
Features:Tool maker vise of mini type which can be put in a bigger vise to process the small and precise workpiece. Also it can be used in an E.D.M. machine and grinding machine. Squareness and parallelism within 0.0002”.HRC 54~56 Harden.
Features:Clamping slots & 2 3/8” holes in base provide easy fi xing to angle plates; Ground V way; Square & parallel within .0002”
Model Wt. PriceV60 5 Lbs $67.00
Wheel Balancing StandFeatures:The wheel type balancing stand is made to last with endurance. This stand can be used for wheel up to 16” in diameter. For balancing, straightening and wheel align-ment. No leveling, centering or set-up needed. Hardened & ground discs freely rotate on ball bearings.
Model Weight PriceWBS 37Lbs $366.00
Max for 16” grinding wheel
Accuracy of roller within 0.0002” while turning right or leftAccuracy of point A within 0.0002” point B within 0.00031” while turning.
Features:• High accuracy cylindrical grinding work possible just by putting this economical unit on surface grinder• No center alignment necessary, just put work on rollers• Portable with single-hand, thus easily set on grinders• With rollers motor-driven, attention can be concentrat-ed on table/wheel feeds• Work also can be formed in radius or taper
GROMAX Motor Punch Grinder
Model Wt PricePG 17Lbs $387.00
GROMAX Punch Grinder
Punch grinder can be put on the surface of grinding machine for round punches (0.12” - 1.18”). It can be ground by putting among three rollers of punch grinder without checking the center.
D d
lLGROMAX Cross Worktable
GROMAX Tool Makers Vise Wheel Type
GROMAX Tool Makers Vise Features:• Made of hardened steel• Precision ground: parallelism and squareness ±0.0002” on sides and bottom.• On piece construction with a moveable jaw• Positive downhold and quick positioning notches enable rapid set-up
Unit is adaptable to various length arbor (balancing arbor not included)
GRINDER & ACCESSORIES
Length: 10.43”Height: 3.46”Diameter: 3.15”
Rotary Wheel DresserFeatures:• Prolongs Grinding Wheel’s Life.• Give True cutting Surface On a Grinding Wheel.• Easy To Use & No Set-Up Down Time.• Blaze-Dried Lacquer Surface Finish.• Axis Part is Fixed With Shaft Bearing For High Speed• Rotation. Ideal For CBN Or Diamond Wheel. Also Known As Braking Dresser.• Weight: 12 Lbs.
Extra Grinding Wheel RD#60 $12.00 each
Model Weight PriceRDM 12Lbs $920.00
Motor Rotary Wheel Dresser
Extra Grinding Wheel RD#60 $15.00 each
Model Weight PriceRD 12Lbs $420.00
Coolant Resistance Model
Radius and Angle Dresser
Specifi cations:Maximum wheel diameter standard 10”Internal radii 5/8” ~ 1-5/8”With rat - tail adapter 1/32” ~ 1-5/8”External radii. 0~1-5/8”Height from base to center 4-3/32”Tangent travel, Either side of center 1-5/8”
Diamond dresser $25.00DS-010(0.4"x3.15"/ .2CT)
Model Wt PriceTDB 29Lbs $730.00
page 48
Specifi cations:Cut off precision .98 x 11.8” 0.0004”Rod Size (w/o Small Pin Fitting Device)
OD 1mm~25mm
Shortest Rod (w/o Small Pin Fit-ting Device)
60mm
Right angle precision .98 x 90° 0.0004”Cut-off Sander Lamina T x Dia. / Hole
0.0039” x 7.1”/ 1.25”
Grinding sander WA46K x 0.39” x0.2”x 0.79”RPM 3600 rpmMotor 3/4 HPMachine Size 17” x 14” x 20”
GROMAX Rods Precision Cut-Off and Surface Grind Machine
Features:Cut off ejector pins and grind them to length in one set up.Fast, economic way to grind pins, rods, squares to lengths accurate to within .001”.Depth mic. attachment lets you cut to desired length.V-groove clamping mechanism fi ts all sizes.Built in diamond dresser for easy dressing.Short pin fi xture available. Please call for more information.
The dimensions precision of cut-ting off the length of working piece are not subject to the eff ect of the diff erence of thickness of cutting-off sander piece.
During operation, the grinding sander may be micro adjusted and repaired without chang-ing its dimensions.
The tightness of belt may be automatically adjusted and controlled
(the larger the resis-tance, the tighter the belt).
The rapid positioning rule is in the unit of 0.79” and provided with a micro rule (0 to 0.98”) of which the zeroing point is the dimensions at the rapid positioning point.
When operation, a shaft with two ta-pered ends is used for transmission and characterized by high stability, low wearing rate and long life.
The rapid chuck is used to hold the work piece in place, opening or closing it is very quick, and 0.04”-0.98”is the same.
Accessories:RPC.CW Cut off Wheel $6.00RPC.GW20M Grinding Wheel $26.00RPC.DD Diamond Dresser $24.00RPC.PIN Small Pin Fitting Divice $175.00RPC.300MM Micro Meter (300mm) $418.00RPC.500MM Micro Meter (500mm) $540.00RPC.FLG Flange $44.00RPC.BLT Belt $33.00
Model Wt. PriceRPC 200 Lbs $3,890.00
Small Pin Fitting Device
GRINDER & ACCESSORIES
Lux-Matter Precision Gear Head Engine Lathe
LUX1340G / LUX1440G Features:ASA D1-4 spindle camlock nose with 1-9/16" spindle bore3HP 220V 3 phase motorBedways are hardened and ground with removable gapFull length splash guard w/built in coolant systemQuick action foot brake system and pull out chip tryQuick change total close gearbox for inch/metric threadingSpindle and headstock gears all hardened and precision ground
LUX1340G / LUX1440GStandard Accessories: Main Motor 3 HP (LUX1340G) Stand with Chip Tray / (LUX1440G) One-Piece Cast Iron Stand Foot Brake Back Plate (D1-4) MT#3 Center Reducing Sleeve Threading Dial Tool Kit & Box 4 Way Tool Post Complete Electrical Equipment Instruction Manual & Parts List Gap Bed Coolant System 3-Jaw Chuck 6” 4-Jaw Chuck 8” Face Plate 12” Steady Rest 4” (LUX1340G) / Steady Rest 4-1/2” (LUX1440G) Follow Rest Full Length Splash Guard
LUX1340G MADE IN TAIWAN
Specifi cations:LUX1340G LUX1440G
Capacities Swing over bed 13” 14”Swing over cross slide 8” 9”Distance betweeen center 40” 40”Swing in gap 20” 21”Width of bed 8” 10”
Head Stock Spindle nose ASA D1-4Spindle bore 1 9/16”Taper of spindle MT#5Spindle speeds 42~2000rpm / 16 steps
Threads & Feed
Inch threads 4-112T.P.I. (40 kinds)Metric threads 0.25~6.0 (22 kinds)Module pitch threads 0.25~3.0M.P. (otional)D.P. Threads 8~112 D.P.(optional)Longitudinal feed range 0.002”~0.04”IPRCross feed range 0.001”~0.02”IPRLeadscrew diameter / pitch 1” /4T.P.I
Standard Equipment Includes:Steady Rest, Follow Rest, 3&4 Jaw Chucks, 4 Way Tool Post, Face Plate, Coolant System, Reducing Headstock Sleeve, Rapid Braking Center, One Piece Stand with Chip Tray, Rear Splash Guard, Gap Bed Threading Dial, Inch. Metric Gear Box (No Change Gears Required)
LUX1440G
page 49
Dual Dial On Toll Post Slide
Dual Dial OnCross Slide
Headstock & Gear Box
GROMAX High Accuracy Second-Operation MachineFeatures:80 millionths spindle runoutFast lever collet chucking with single movementHardened and precision ground special alloy steel bed waysStandard 5C collet closerThe spindle is supported by 2 point preloaded precision angular contact ball bearings to absorb radial and axial forces.Spindle speed can be changed while the cuttingBuilt-in coolant with sump and self draining oil panAutomatic driveshaft spindle brakeDirect reading spindle speed indicator
GROMAX High Accuracy Tool Room Lathe
Optional Accessories:Vertical cut off slide GT618.15C emergency collet GT618.2Taper turning attachment GT618.3Chip and coolant shield GT618.4Tapped face plate GT618.5
Model PriceGS616 $15,500.00
Model PriceGT618 $26,900.00
Steady rest GT618.6Follow rest GT618.75” 3 jaw chuck GT618.8MT#2 precision life center GT618.9Fixture plate for 5” 3 jaw chuck GT618.10Fixture plate for 6” 3 jaw chuck GT618.11
Features:English/ metric dual dialQuick change gear box with 36 rangeSet of 5 change gearQuick-action compound slide for threadingPreloaded ball bearing lead screwHardened precision ground spindle with taper nose, 1 1/16” collet capacityIndependent electric control feed for carriage and cross slideSpecial alloy steel bed ways hardened & precision ground
1. Double Tool Cross Slide 8. Six-Station Turret
6. Compound Slide
7. Handwheel Tailstock
Tool Room Lathe Hardinge Compatible
Optional Accessories:1. Extra double tool cross slide GS616.12. Straight and taper turning slide GS616.23. Vertical cut off slide GS616.34. End working slide 5-1/2” GS616.45. Chip and coolant shield GS616.56. Compound slide GS616.67. Screw feed tail stock GS616.78. 6-Station Turret GS616.8
Specifi cations:Spindle Capacity with Jaw Chucks 5”
Bed Width 12” 15 3/4”Total Travel of Top Slide 4 3/4” 7 1/2”Swing over Bed 17” 22” Swing over Cross Slide 10 3/4” 13”Swing over Gap 24” 30 7/8”Distance between Centers 44” 67” 78 3/4” 118”
Head-stock
Number of Spindle Speeds 12 steps 12 stepsSpindle Bore 2 1/4” 4 1/16”Type of Spindle Nose D1-6 D1-11Taper of Spindle Bore & Center MT No.6 x No.4 MT No.7 x No.5 Range of Spindle Speeds 35~2000 rpm (12 steps) 13~1200 rpm (12 steps)Cross Slide Travel 8 5/8”Compound Rest Travel 7”Max. Tool Size 1” Square
Thread & Feed
Dia. and Pitch of Lead Screw Ø35mm 6mm/pitch or 4TPI” Ø45mm 6mm/pitch or 4TPI”Range of Inch Threads 2-72 TPI (44 kinds) 2-72 TPI (44 kinds)Range of Metric Threads 0.2-14mm (39 kinds) 0.2-14mm (39 kinds)Range of Longitudinal Feed 0.0012”-0.034” (36 steps) 0.0014”~0.039” (36 steps)Range of Cross Feed 0.0006”-0.017” (36 steps) 0.0007”~0.020” (36 steps)
Motor Main Drive Motor 7 1/2 HP 10 HPCoolant Pump Motor 1/8 HP 1/8 HP
Power 220V, 3 phase 220V, 3 phaseNet Weight 3520 lbs. 3960 lbs. 7715 lbs. 9260 lbs.Packing (Length x Width x Height) 90” x 42” x 59” 114” x 42” x 59 138” x 59” x 71” 177” x 59” x 71”Price $18,400.00 $19,800.00 $28,200.00 $30,900.00
Optional Accessories (GLA-1744/GLA-1767) GLA17.1 Micro Bed StopGLA17.2 Taper AttachmentGLA17.3 Taper Attachment InstallationGLA17.4 Lever Type 5C Collet Closer JFKGLA17.5 Import Collet CloserGLA17.6 Sargon Digital Read-Out-44”GLA17.7 Sargon Digital Read-Out-65”GLA17.8 Sony Digital Read-Out-43”GLA17.9 Sony Digital Read-Out-67”GLA17.10 D.R.O. InstallationGLA17.11 Quick Change Tool Holder (Made in USA)GLA17.12 Import Quick Change Tool Holder
Optional Accessories (GLA-2280/GLA-22120)GLA22.1 Micro Bed StopGLA22.2 Taper AttachmentGLA22.3 Taper Attachment InstallationGLA22.4 Sargon Digital Read-Out-80”GLA22.5 Sony Digital Read-Out-80”GLA22.6 D.R.O. InstallationGLA22.7 Quick Change Tool Holder (Made in USA)GLA22.8 Import Quick Change Tool HolderGLA22.9 120” Digital Read-Out Systems
These BTC series has it’s top & master jaws. The hard top jaws can perform as internal external jaws by turning them around 0.003” T.I.R. repeat-ability & meet ASA specifi ca-tions. Duplicate parts for chuck through 12”
Precision zero set chucks with new lower prices with 0.0005” TIR repeatability on duplicate parts
Features: Semi steel body. Scroll and jaws hardened & ground for extra gripping force Comes with master jaws and top jaws Three jaw scroll chucks for conventional machining
Optional Accessories:Rip fence for straight, repeated cuttings, easily removable for varied sizeMiter protractor for angular cutting
Standard Accessories:Blade shear, grinder Saw blade butt welder with annealing unit built inBuilt-in blade & tire cleaning brushLow voltage working lampOne set of required toolsOne instruction & parts manual
GROMAX Vertical Metal Cutting BandsawVariable SpeedGV-50 / GV-100
Butt welder capacity 2.4 KVA,1/8”~5/8”Drive motor (HP) 1 1 2 2Net Wt. (LBS) 551 882 1322 1963Price $3,300.00 $3,880.00 $5,650.00 $7,100.00Price w/Table auto feed NA NA GV-50A
$11400.00GV-100A$12960.00
Features:Large, easy to read dialsSmooth movement due to steel balls on the longitudinal travel bedAir bearing fi xture works on steady restAir quill make of heat-treated alloys, chromium plating, ground and tappedHigh grade castings and aluminum alloys throughoutForward and reverse switchUse worm and worm gear to adjust angle and turn around the wheel headProper distance of longitudinal travel is controlled by limit switchBacklash adjustment exist in the leader screw and nut of crossfeed
GROMAX Universal Tool & Cutter Grinder
Standard Accessories: Free!Air bearing fi xtureCup wheelOpen end wrenchForward/ reverse switchOff set wrenchHex wrenches (2)
Model PriceGT-610 $4,200.00
Specifi cations:Distance between centers 10”
Swing over table 8”Longitudinal travel of table 10”Cross travel of saddle 6-5/16”Work table 5-1/4” x 18-1/2”Vertical adjustment of wheel head 7-1/2”Swivel adjustment of table 0°Swivel adjustment of column 360°Vertical tilting range of wheel head 360°Diameter of wheel 1-1/4” I.D. Saucer wheel: 6”
MACHINE TOOL. SHOP SUPPLYHoist and Lifting RingSide Load Hoist Ring
Safety Hoist Ring
Please call or visit our website at www.gromaxonline.com for more details.
Stainless Steel Safety Hoist Ring
Hoist Ring Kit
page 53
Universal Magnetic Base Features:Instant universal position with a single knobAccepts indicator w/ dovetails and 3/8" dia.Magnetic on/off base switch (indicator not included)
Features:• Suited for pulling/dragging steel material or steels, and carrying work, metal molds, press die, etc. • A new cam mechanism, used to break contact and release, will not scratch the work surface
KANETEC MaghandFeatures:• Used to pick up small steel parts, nut/bolts, nails, scrapes, for removal or material handling. • Easy to squeeze T handle releases material. Maximum batch of material which can be picked up at one time from 4~9 Lbs., depending on steel content, shape and sizeSpecifi cations:Dimensions: 4.49”x8.94” (10A) 4.49”x19.69” (50A)Weight: 3.3 Lbs. (10A) 4.2 Lbs. (50A)
HMC-10A HMC-50A
Model PriceHMC-10A $70.00HMC-50A $100.00
KANETEC Magbore Drill GuideFeatures:• Mini size Magbore for drill diameter up to 0.26” (6.5mm)• Attaching fi rmly even to thin plates of 0.2” (5mm) thickness
Features:● Permanent magnetic holder for long time attraction without trouble of dropping due to power failure.It is turned ON/OFF with electric control.●Magnetic force turns OFF(releases)by power supply control and it is turned ON at all other times.●The interruptible power supply is not required.
Horizontal Bandsaw
Model RF-1018BSHOWN
RF-916H 9” x 16” capacity, 1 HP, 4 cutting speeds 3- phase and single-phase motor both available, 1” blade, with coolant system and hydraulic feed
RF-712DR/ 2WAY SWIVEL HEAD Price7” x 12” capacity, 3/4 HP, 1 PH, Motor, 3/4” blade
$3120.00
Horizontal Bandsaw
Model: BS300SA
Capacity:Round: 12”Rect.: 10”x20”
Model PriceBS300SA $8,850.003HP, 73-260 RPM, 1 PH, Motor
page 54
Standard CompleteSet includes:Tool trolleyFour trays 28 pieces #40 inserts
Features:Rugged steel construction & roomy bottom shelf spaceStrays put with positive brakesCruises smoothly on oversized wheelsLift-out tooling tray load or unload tooling individually at separate sitesIdeally size measured at: 33.5"x37.5"x25.5" (HxWxD)Weight: 106Lbs.
CNC Machine Tool Trolley
Model PriceGX-102 $335.00Complete set
Model # Insert PriceGX-102-2GX-102-3GX-102-4GX-102-5GX-102-6
* 25W motor, single phase, 110V/ 220V power outlet; * Auto-alarm system reminds you to refi ll; * It has a fl oat switch that can detect the oil volumn
“CESA” auto/manual lubricating pumps are ideal accessories for new machines, rebuilt machines and replacement for broken manual one-shot lub pumps.It has capacity of 3-6 c.c. “CESA” is automatically operate, shop operator still can use the manual lub when it’s necessary.
Auto. Lubricant PumpOil tank capacity:2.0l Motor: 110V 220V
Model Volt PriceCESD-A 110V $199.00CESD-B 220V $199.00
Hand Pressing LubricatorSpecifi cations:Discharge Capacity 8CCDIscharge Pressure 70 psiTank Capacity 1 literDIscharge bore 4 or 6
Manual Pump/Hand OilerFeatures: The surface coated by paint is endurableMade of special aluminum alloy and assured no leakage by pressure leakage tests Suitable for general lubrication oil Oil capacity can be adjusted
Suitable for Universal Cutter & Tool Grinder Model G40 (Page. )
CTA-8L
CTA-8R
CLA-8
Model BME-6$55.00 each
MACHINE TOOL. SHOP SUPPLY
page 55
GROMAX Powerful-Hydraulic Radial Drilling Machine
PH-1312DH shown
Features:• Rugged construction - ideal for medium to heavy-duty large holemaking production• Large production grade work table: 25.5” x 20”• 3HP Spindle motor• Spindle Speed:75-1525 RPM(12 speeds) Automatic feed: 3 Speeds:0.0039”, 0.007”, 0.0118”• Column diameter: 6.69”• 21.6” swing
GROMAX Heavy Duty Upright Type Drilling Machine
Features:• Machine made of Meehanite casting with rib striped structure for extra rigidity to handle heavy-duty operation• All Gears are made of chrome-molybdenum alloy, hardened and ground, to ensure a durable gearbox• Hydraulic clamping system: Easier to operate(simply push a but-ton, stronger and quicker to hold or release)• Speed Preset: Preset the spindle speed for the next operation while machining• Base plate has T-slots and drain channels• Built-in coolant system
Net weight (approx.) 7040 Lbs. 7040 Lbs. 7040 Lbs.
Price $60,300.00 $58,880.00 $56,240.00
GROMAX Vertical Knee Mill
Specifi cations:Model Machine Size 4V
$21,300.00Table size 12.6” x 52”Longitudinal travel (manual/ power)
27.6”/ 26.8”
Cross travel (manual/ power) 10”/ 9.5”Vertical travel (manual/ power) 14.3”/ 13.8”Weight of the machine 6160 LBOverall dimensions (L x W x H) 91” x 69.7” x 80.7”
Dial Type
GROMAX Universal Milling Machine Best Tool for Helical Machining
Specifi cations:Model Machine 2HUTable size 10” x 35 1/2”Overall dimensions (LxWxH) 55” x 52” x 58”Net Weight 2860 lbs
GROMAX Bed Type Universal Milling Machine
Individual Catalog is available: www.gromaxonline.com
Special
$7,950.00
MILLING MACHINE & ACCESSORIES
Air Tapping MachineAE Series: Portable Type AE-08-700 AE-12-700 AE-16-700For Tap M2~M8 M3~M12 M3~M16Speed 700rpm 400rpm 400rpmWork Range (Max. Radius) 27.56” 27.56” 27.56”Weight 26.4 Lbs. 26.4 Lbs. 33.0 Lbs.Price $1,200.00 $1,200.00 $1,900.00
AT-I Series: Simple AT-08/I AT-12/I AT-16/IFor Tap M2~M8 M3~M12 M3~M16Speed 700rpm 400rpm 400rpmWork Range
Meehanite castingsX Y Z Hardened & ground with Turcite-B coating guide wayAtrump Machinery has always off ered Highest Quality Stan-dards.Electronic Variable Speed Head 70-5000rpm with Hi/Lo Gears.Chip rubber cover (Front & rear)Built in Halogen Work LightOne shot lubrication system.Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.C7 double nut precision acme lead screws for high accuracy and long lasting.
Hydraulic Tapping Machine Specifi cations: Model HM-22 HM-32 HM-50For Tap M3~M22 M4~M32 M8~M60Speed 150~400rpm 0~200rpm 0~100rpmWork Range Max. Radius 59.06” 59.06” 59.06”
Min. Radius 7.87” 7.87” 7.87”Power Supply 3~x380V;
Features:Rapid positioning and high machinery speed increase productivity Lower tap damage plate, higher thread accuracy Tap shall never break for tapping through-hole or blind-hole Tapping for heavier work piece requires large work area Lower machining cost than by CNC machine, drilling tapping machine or manual tapping operation Easy operation, no experience required
Standard Accessories: Hydraulic Tapping Spindle Parallel Arm Radial Jib Table Mounting Column Choose any six Safety Clutch Tapping Adapters
Work Table and Cart
Hydraulic Motor, Pump and Box Computer-Controlled Device
Specifi cationModel MV949-KV2 MV1054-KV3TABLE 9x49” (229mm x 1245mm) 10” x 54” (254mm x 1371mm)X TRAVEL 36” (914mm) 36” (914mm)X TRAVEL (WITH POWER FEED) 32.5” (825mm) 32.5” (825mm)Y TRAVEL 12” (305mm) 15.75” (400mm)Z TRAVEL 16” (406mm) 16” (406mm)QUILL TRAVEL 5” (127mm) 5” (127mm)QUILL DIAMETER 3.38” (86mm) 3.38” (86mm)RAM TRAVEL 12” (305mm) 24” (610mm)SPINDLE NOSE TO TABLETOP 1.96” to 17.9” (50- 456mm) 1.96” to 17.95” (50- 456mm)TABLE LOAD CAPACITY 660 LBS (300KGS) 770 LBS (350KGS)T-SLOT (3) 0.62” x 2.55” 0.62” x 2.55”SPNDLE TAPER R8/NT30 R8/NT30SPINDLE SPEED 70 to 4200 rpm with Hi/Lo gears 70 to 4200 rpm with Hi/Lo gearsTRANSMISSION SPINDLE-MOTOR Timing belt MOTOR Timing beltHEAD SWIVEL(RIGHT/LEFT) ±90° ±90°HEAD TILTING ANGLE (UP/DOWN) ±45° ±45°SPINDLE MOTOR/MAX POWER 3HP 3HPCOOLANT PUMP (OPTIONAL) 1/8 HP 1/8 HPLUBRICATION PUMP One shot One shotFLOOR PLAN 64” x 75” x 85” 110” x 100” x 89”NET WEIGHT 2420LBS (1100KGS) 2860LBS (1300KGS)POWER REQUIREMENT 4 KVA 3 phase 208V-230V (Max) 4 KVA 3 phase 208V-230V (Max)TYPE OF OIL FOR OIL WAY Mobil Vectra #2 Mobil Vectra #2AIR Requirement With Opt. power draw bar 90-100 psi With Opt. power draw bar 90-100 psiPrice $8250.00 $9650.00
page 57
Electronic Variable Speed Head with Hi/Lo Gears.
Features:Meehanite castingsX Y Z Hardened & ground with Turcite-B coating guide wayAtrump Machinery has always off ered Highest Quality Standards.Electronic Variable Speed Head 70-5000rpm with Hi/Lo Gears.Chip rubber cover (Front & rear)Built in Halogen Work LightOne shot lubrication system.Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.C7 double nut precision acme lead screws for high accuracy and long lasting.
Model KE2 KE3TABLE 9” x 49” (229mm x 1245mm) 10” x 54” (254mm x 1371mm)X TRAVEL 36” (914mm) 36” (914mm)X TRAVEL (WITH POWER FEED) 32.5” (825mm) 32.5” (825mm)Y TRAVEL 12” (305mm) 15.75” (400mm)Z TRAVEL 16” (406mm) 16” (406mm)QUILL TRAVEL 5” (127mm) 5” (127mm)QUILL DIAMETER 3.38” (86mm) 3.38” (86mm)RAM TRAVEL 12” (305mm) 24” (610mm)SPINDLE NOSE TO TABLETOP 1.96” to 17.9” (50- 456mm) 1.96” to 17.95” (50- 456mm)TABLE LOAD CAPACITY 660 LBS (300KGS) 770 LBS (350KGS)T-SLOT (3) 0.62” x 2.55” 0.62” x 2.55”SPNDLE TAPER R8/NT30 R8/NT30SPINDLE SPEED 70 to 5000 rpm with Hi/Lo gears 70 to 5000 rpm with Hi/Lo gearsTRANSMISSION SPINDLE-MOTOR Timing belt Timing beltHEAD SWIVEL(RIGHT/LEFT) ±90° ±90°HEAD TILTING ANGLE (UP/DOWN) ±45° ±45°SPINDLE MOTOR/MAX POWER 3HP 3HPCOOLANT PUMP (OPTIONAL) 1/8 HP 1/8 HPLUBRICATION PUMP One shot One shotFLOOR PLAN 64” x 75” x 85” 110” x 100” x 89”NET WEIGHT 2420LBS (1100KGS) 2860LBS (1300KGS)POWER REQUIREMENT 4 KVA 3 phase 208V-230V (Max) 4 KVA 3 phase 208V-230V (Max)TYPE OF OIL FOR OIL WAY Mobil Vectra #2 Mobil Vectra #2AIR Requirement With Opt. power draw bar 90-100 psi With Opt. power draw bar 90-100 psiPrice $9700.00 $11,350.00
Features:•Fits all mills with 3-3/8” quill diameter and R8 spindle taper•Converts a vertical mill into a horizontal mill•Concave & convex grove•Made of heat treated alloy steel•Set includes: right angle head, arbor support & milling arbor
Universal Right Angle Attachment
1” R8 Stub Arbor $40.00
R8 SpindleDescription Model PriceComplete Set URAMHR8 $730.00Individual componentsRight Angle Head URAMHC $510.00Arbor Support URAMHE $215.00Milling Arbor URAMHG $180.00NT SpindleDescription Model PriceComplete Set URAMHNT30 $930.00
Machine Model AV32 AV35 BM460T BM560TTable 10” X 50” 10” x 54” 15.7” x 54” 16.5” x 63”Longitudinal travel (X-axis) 31.5” 35 “ 40” 51”Cross travel (Y-axis)
18” 19.6” 20” 24.5”
Vertical travel (Z axis)
20” 22” 22” 24”
Saddle size 20” 24”Spindle center to column front surface
21.5” 21.5” 21.7” 25.5”
Spindle nose to table center 3.93” to 24.01” 3.93” to 25.98” 4” to 26” 5” to 30”Load Capacity 880 lbs 1,100 Lbs 1550 lbs 2000 lbsSpindle motor 3HP(optional - 5Hp) 5 Hp 7.5 HP 10 HPSpindle taper R8/#30 R8/#30 CAT#40 NT#40Spindle speed 70 to 4500 rpm with Hi
/ Lo range70 to 4500 rpm with Hi / Lo range
60 to 4200 rpm with Hi / Lo range
60 to 4000 rpm with Hi / Lo range
Head Swivel (left/right)
90/90 degrees 90/90 degrees None None
Price $31,000.00 $37,800.00 $56,035.00 $66,040.00
GROMAX Milling Machine HeadFor Bridgeport or Bridgeport Type Taiwanese Mills
Features:Complete new mill head for your old machine body or special machinery. Chrome quill with super precision preloaded bearing. Spindle nose taper I.D. 0.0002" / 0.005mm T.I.R. Spindle Taper: R8. Quill power feed: 0.0015"/ 0.003"/ 0.006" rev Quill Travel: 5" / Quill diameter 3 3/8". Power output: Variable speed 220V/440V/3 Step pulley 220V / 3
MH-V100Variable Speed(3HP/R8 spindle)
MH-V20016 Speed Step Pulley(3HP/R8 Spindle)
MH-V400Variable Speed(5 HP/ NT40 spindle)
Mounting Data:5 HP Milling head bolt circle is 6.5"3 HP Milling head bolt circle is 6.0"
All other spare parts for Bridgeport or Bridgeport type Taiwanese mills are also available.Please call or fax your inquiry.
MILLING MACHINE & ACCESSORIES
Centroid’s Easy Conersational programing with 15” Touch Screen LCD Centroid M400 control with 15” Touch Screen LCD
Hardened & Ground with Turcite-B coating guide wayDouble nut precision ball screws hardened & ground for high accuracy and long lastingFC30 Meehanite casting main frame with annealed & stress relieved for long term reliability100% laser tested for positioning accuracy & repeatabilityBox ways design on Y & Z axis to provide maximum rigidity & stabilityStandard way covers on all three axesTool box & toolsCoolant systemCentral lubrication systemBuilt-in Quartz work lightPortable hand wheel (opt)
10 Great Reasons to Go EVS-Mill1. 3HP high effi cient motor for high torque output2. Infi nite 0-4500 RPM constant spindle speed. Change in no time (0-4 sec.)3. C.N.C. vector type A.C. Frequency drive4. Machine can run on single or three phases without changing the wiring5. Low maintenance and down time cost because of no plastic insert, key and moving pulley.6. No RPM changer break down, but accurate reading on RPM to prolong tool life7. Electronic and mechanical brake for fast spindle stop8. No belt slippage for high ef-fi cient torque output9. Boring and tapping applica-tion10.Save energy costs up to 35%
Model Spindle range PriceMH-E300R8 3HP EVS Head* $3,650.00MH-E300NT 3HP EVS Head* $4,720.00
Model Spindle range PriceMH-V100 Variable Speed
70~4200rpm$3,450.00
MH-V200 16 step Pulley 80~5600rpm
$2,300.00
MH-V400 Variable Speed70~3600rpm
$3,900.00
MH-E300R8 Shown
page 59
GROMAX Cartridge SpindleAS Series For CNC Machining Center
BS Series For CNC Machining Center DS Series For CNC Milling Machine
Features: Flatness of all sides to .001" guaranteed modes, upright, left and right side. Up to 15,000 lbs. clamping force.
GROMAX 6” NC Machine Vise
Specifi cations:Table diameter 12”Table height (horizontal x vertical) 7.25” x 14.57”Center hole/ height (vertical) MT5/ 8.19”Direct indexinng 24 DIVGear ratio 90:1Accuracy:Surface to center hole squareness 0.0008”Surface to base parallelism 0.0008”Clamping surface fl atness 0.0006”Tapered center bore concentricity 0.0008”Max. cumulative spacing error 45 seconds
Model Wt. PriceHUT300 204 Lbs $2,750.00
Feature: Extra deep coolant channel 10 second vernier reading, 2 minute tilt reading Satin chrome dials Super low profi le Heavy duty construction Hardened & ground worm gear
Features:• This twin vise off er 2 clamping stations, 6”x4” model• Ideal for jobs where it is necessary to maximize the number of parts in the work envelop and increase the number of machining sequences in a single setup• .0002” accuracy
Precision Double Clamping Vise
In case of diff erent sizes for two work-pieces, the clamp-ing operation can still be performed when the length diff erence is less than 2.76”.
Once the center stationery jaw is removed, this vise become a center clamping angle lock vise.
This vise can be change into a super open vise by removing the center stationery jaw and then fi xing the rear movable jaws.
Specifi cations: UNIT: (Inch)Model A B C D E F GDL44 15-5/8 3-3/8 3 1-1/4 3-11/16 4 7-7/8”DL64 20-1/2 4 3-15/16 1-3/4 4-7/8 6 10-9/16
Boring Head C-TypeFeatures:The direct reading adjusting screw is ground after hardening and a plainly marked dial face in non-refl ecting stain chrome allows easy reading and adjustments of 0.0005" or less; With a variety of shanks, this model takes a 1-1/2”-18 threaded shank.Model BC2 BC3 BC4 Price $59.00 $89.00 $120.00Actual Size 2” dia 3” dia 4”diaOverall length 2-13/32” 3-5/32” 3-1/2”Boring bar 1/2” 3/4” 1”Hole Center Dist. Between Holes 5/8” 15/16” 1-1/4”Cross hole dia. 1/2” 3/4” 1”Off set 5/8” 1” 1-1/16”Weight 2Lbs 5Lbs 7Lbs
GROMAX Super Lock ViseFeatures: Material is highest quality ductile iron 80,000 psi, fl ame hardened bed, standard swivel base, hardened & ground jaw plates, screws hardened & threads ground 1 lb. of force horizontally, 1/2 lb. of force vertically pushes jaw downward Coolant through & enclosed lead screw Removable hinged handle for fast locking Provides better clamping pressure Eliminates hammering
HAV-6.5 has 8” bigger jaw opening than HAV-6 (with the same jaw width, depth and overall length)
Model Wt.(Lb) PriceDL44 (4”) 44 $1280.00DL64 (6”) 101 $1470.00
GROMAX Super Index Spacer Type CS-8”
Standard Accessories:1. 8” 3-Jaw chuck 2. 6 Division Masking Plates (2,3,4,6,8,12)3. 10” Face Plate
Can be used as a dividing header or a rotary table & has the feature of milling, drilling, jig boring & many other com-mon machine shop applications.
Max. Variation InchFlatness Of Clamping Surface (concave): .0006”True Running of Cylindrical Center Bore: .0008”True Running of Tapered Center Bore: .0008”Parallelism Of Clamping Surface To Base:.0008”
GROMAX Hydraulic Machine Vise Feature: Spring-disc cylinder absorbs vibration in cutting process Alloy steel jaws hardened & ground High tensile strength cast iron body Hardened & ground slide way Adjustable clamping force Enable rigid clamping
Features:Worm and crank handle for easy adjustment. Low profi le design. Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel base available
Features:Worm and crank handle for easy adjustment Low profi le design Adjustable 45 degrees both right and left Angle markings are accurate and easy to read Swivel Base attached
Features:Quick operation. Stable and rigid design. Extremely high clamping force. High accuracy and repeatability. Reduces production costs.
This vice can be operated both manually and pneumaticaly. The pneumatic power en-ables rapid strong clamping of the workpeice which signifi cntly improves productivity. Super-Lock Mechanism ensures jaws are parallel during clamping and eliminates defor-mation ensuring fi rm and accurate work holding. Design is compact and very simple to operate requiring almost no maintenance. The combination of Pneumatic over Hydraulic Power provides both high speed and extremely high clamping force. These vices are supplied with a mechanical push button valve as standard. A Solenoid Valve is also available for use in automated or unmanned production situations.
Features:One-Piece Construction provides high rigidity and super precision. Heat Treated Slideways. Super-Lock System holds Jaw down on slideways and prevents Jaw deformation. The vise has 4 reference-surfaces for mounting horizontally sideways or vertically. The patented Multi-Power System built of HIGH GRADE BEARING STEEL provides extremely high clamping pressure.
Fixed Hight makes several vises can be used together.This product is suitable for multi-unit applications on both horizontal and vertical CNC Machining Centers as well as Conventional Milling Machines where heavy duty machin-ing requires a very high clamping force.
GROMAX CNC Multi power Fixed Super Vise
SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D F G H J C1 C2 C3 Wt(kg) PriceHPAC-130 147 95 80 440 520 131 15 70-260 115-305 185-375 47 $1,410.00 HPAC-160 160 105 80 525 564 161 15 85-325 140-375 220-460 65 $1,600.00
MULTI-POWER CNC PRECISION FIXED ANGLE VICEFEATURES • Shortest Length with Big Jaw Opening • Extremely High Accuracy and Repeatability • Special MULTI-POWER design enhances clamping force of 0 ~ 6000 KG
SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B C C1 D E F G H I J K L M PriceHPAC-130S 147 95 0-190 155-340 75 18 42 500 131 19 15 178 55 181 $1,710.00
This vise has the same features as model HPAC above, but has stan-dard screw clamping instead of the MULTI-POWER SYSTEM.
FEATURES HRV-series’ VISE IN-ROW is a kind of multiple clamp vice. Full set of this vice is made from Tool Steel with heat treatment more than HRC 60º of hardness and then ground precisely en-sures long life. It enlarges clamping dimension. No matter what shape of working piece, such as square, round, cylindrical or any irregular shapes can be positioned quickly. Precision gear locating datum plane is adjustable so working piece can be fi xed easily.This vice is suitable for CNC Machining Cen-ters and Surface Grinder, ..etc.
GROMAX CNC VISE IN-ROW
SPECIFICATIONS (Material: Tool Steel, Hardness over HRC 60º ) Unit: mmMODEL Price A B C D E F G H I J K P KGHRV-5030 $1,550.00 50 300 66 75 25 50 70 80 18 10 30 1.5 7HRV-5040 $1,680.00 400 80 40 9HRV-5050 $1,870.00 500 90 50 10HRV-5060 $2,050.00 600 100 60 11HRV-5070 $2,320.00 700 110 70 12HRV-7543 $2,360.00 75 430 85 115 40 75 115 100 18 17 65 2 20HRV-7553 $2,760.00 530 115 65 25.5HRV-7563 $2,940.00 630 115 65 29.5HRV-7573 $3,140.00 730 65 115 33.5HRV-10055 $4,230.00 100 550 108 125 50 75 75 100 18 17 125 2.5 39.5HRV-10065 $4,670.00 650 125 75 44HRV-10075 $4,910.00 750 125 75 49
setup example
GROMAX MULTI-POWER CNC SUPER VISE
FEATURES • Shortest length with big jaw opening. • Extremely high accuracy and repeat-ability. • Specual Multi-power Design enhances clamping forces of 0 ~ 8000 kg
SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC60º ) Unit: mmMODEL A B C C1 D E F G Max. clamp-
SPECIFICATIONS(Material. FCD 60 Ductile Iron. Hardness HRC 50º) Unit: mm MODEL A B D E F G H I J C1 C2 C3 Weight(kg) PriceHPAV-130 147 95+0.01 80+0.02 18 440 520 131 19 15 70-260 115-305 185-375 47 $1,050.00 HPAV-160 160 105+0.01 80+0.02 18 525 564 161 19 15 85-325 140-375 220-460 65 $1,400.00 HPAV-200 170 110+0.01 100+0.02 18 600 680 201 19 18 90-380 155-440 240-530 95 $1,690.00
GROMAX ALUMINUM VISE The vise body is made from high tensile aluminum alloy and designed for continuous, heavy-duty operation. It is suitable for use with the groove and hole systems of CNC machining centers and milling machines. FEATURES • Quick change jaws • Double and centralized chucking in one system • Centralized chucking for high precision Standard accessory: Extra 2 PC of Moveable Jaw & 1 PC of Fixed Jaw Moveable Jaw and Fixed Jaw are Available for being Ordered Separately.
SPECIFICATIONS(Material. Alloy Aluminum, Durable hard anodized vice body) Unit: mm MODEL A B C D E F G H I J Weight(kg) Pricecrownfl ex4010 115 76 25 140 70 400 12 100 14 18 12.5 $2,690.00 crownfl ex5015 144 95 25 185 80 500 14 150 22 18 30 $3,810.00
MILLING MACHINE & ACCESSORIES
page 63
BT
GROMAX CNC Keyless Drill Chuck with Shank
Features:The shank and keyless drill chuck are combined as one body and prevent falling out as heavy cutting; Prevent from falling out with instant spindle stop; Short and compact design
Special design & manufacture against for super heavy torque use. When tightened the chuck, you can double the torque by using spanner wrench than by hand.
JC20/2520 or 25mm straight shank
Extremely rigid construction; Minimize the accumulative tolerances; Prevent the drill chucks from falling out; Extremely safe in operation
B) Uni-Body Type
MT2/3/4
Classic Plus Keyless Drill Chuck w/ R8 Integral Shank
CAT
Wrench-Lock CNC Drill Chuck
Classic Keyless Drill Chucks
Model BT Capacity Max Price inch mm rpmWL130BT40 1/32-1/2 1~13 6500 $530.00WL160BT40 1/16~5/8 1.5~16 6500 $598.00WL160BT50 1/16~5/8 1.5~16 6500 $696.00CAT WL130CAT4 1/32-1/2 1~13 6500 $530.00WL160CAT4 1/16~5/8 1.5~16 6500 $598.00WL160CAT5 1/16~5/8 1.5~16 6500 $696.00
Features: For electric drill, super gripping power; Quick releasing of drill bits and not slip when drilling cement; Adopt alloy steel; durable for impact & friction; Lasted for long time.
Features: Wide holding range; Accuracy to .0001”; Unique self-releasing system; High precision collet chuck system suitable for all milling and drill-ing applications; Kit includes chuck holder and wrench; Hardwood case is included
Description:Our VDI Tool Holders are designed and manufactured in accordance with DIN69880. They are made of high grade alloy steel with precision machining, heat-treatment and grinding. In addition to the above-mentioned producing processes, they are 100% inspected and checked in order to ensure the best performance and reliability.
Main Features: Excellent price and quality. Satisfaction Guaranteed!Materials: 20MnCr5; Hardness: HRC 58+2; Depending on tools, these VDI Tool Holders can be used for turning, drilling, reaming, milling, and threading operations.
The Omni Puller is either coolant or air activated. The special adaptor can be easily removed for internally activated applications. The Omni Puller is mounted in two basic ways.Internally Activated - Applications are very common and very easy to mount. Internally activated applications require you to remove the coolant/air adaptor. You must have a minimum of 15 P.S.I. to activate the unit (maximum 80 P.S.I.).Externally Activated - Applications are commonly used with a CNC Turret boring bar holder attachment, or with another style tool holder. These holders must have coolant access ports. These ports can be connected with an external line to the threaded hole of the coolant/air adaptor (thread size 1/8” - 27 NPT). Your external outside coolant system must have a minimum of 15 P.S.I. to actuated the Puller (15 P.S.I. = 107 lbs. clamping force).
Fingers & Finger Sets for Model MP-001 / OP-1000Individual Hardened Steel 50 RC Fingers, Soft Steel Fingers, Soft Aluminum Fingers each $20.00
Model Description Shank Dia. Capacity OD Length Price(In.) (In.) (In.)
MP-001 Mini puller 0.625 3/16-11/8 2.250 4 $395.00MGA-010 Omni puller 1.0 3/16-3 3.750 6 $450.00
VDI Bar PullerVDI Bar Puller to fi t your DIN 69880 VDI 30MM and 40MM Turret and allow you the fl exibility to hold a variety of shapes and Diameters of Material: Flat, Hex, Square and Round.Gripping Range: 1/8” to 3 1/8” Diameter. Model D A B C E Price
• Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation• To be used for collet 6499• External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
Double Torque Double Torque w/IC Available upon request.
Radial Driven Tools (DIN 5480)Radial Drilling & Milling Forward Head• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
• To be used for collet DIN 6499• External coolant supply• Collet is not included
Radial Drilling & Milling Heads w/ Double Collets
R21
DIN 5480
Angular Head
R22(A20)
DIN 5480
page 75
Axial Driven Tools (DIN 5482)
• Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation• To be used for collet 6499• External coolant supply• Collet is not included
Axial Drilling & Milling Head Off set w/ Collet Chuck
• To be used for cutter arbor according to DIN 6499• External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
VDI Tool Holder • DIN 5482Radial Drilling & Milling Forward Head
• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation• To be used for collet 6499• External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
*** Unit: mm***Double Torque, Double Speed and Internal Coolant are also available.
R6
DIN 1809
R3
DIN 1809
Radial Drilling & Milling Forward Head• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
VDI Tool Holder • DIN 1809Radial Tapping Backward Head
• Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation• To be used for collet 6499• External coolant supply• Collet is not included
Radial Drilling & Milling Forward Head• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming For Clockwise and anti-clockwise rotation• To be used for collet 6499• External coolant supply• Collet is not included
• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
Axial Drilling & Milling Head Off set w/ Collet Chuck• To be used for cutter arbor according to DIN 6499• External coolant supply• Collet is not included
Radial Drilling & Milling Forward Head• Applications: For Endmilling, Drilling, Reaming.• To be used for collet DIN 6499• For clockwiseand counter-clockwise rotation. • External coolant supply• Collet is not included
Machine Type SQT 15M-12D, 18M-12D, SQT200M-12D, 250M-12DModelQTN200M/ 250MSQT 15/18M
MAZAK MachineModel
Model G M Price
MP410N-12D, 415N-12DMP610-12D, 6200-16D
MP610 5346101-25B-70 29.5mm1.16”
70mm2.76”
$6150.00
5346101-25B-127 127mm5”
$ 6300.00
MP420N-12D, 620N-12DMP620-12D, 6200-16D
MP620 5347201-25B-90 90mm3.54”
$ 6150.00
D=40MM X Capacity=1-16 ER25 S=42mm Max RPM=4000 A=+900 B=38mm C=65mm E=65.5mm
MAZAK MachineModel
Model G M Price
SQT10M-12D, 15M-16DSQT200M-16D, 250M-16D
QTN 100M/150MSQT 10M
5352200-25B 29.5mm1.16”
70mm2.76”
$5600.00
SQT15M-12D, 18M-12DSQT200M-12D, 250M-12D
QTN 200M/250MSQT 15M/18M
5362218-25B 90mm3.54”
$5700.00
D=40MM X Capacity=1-16/ER25 S=42mm Max RPM=4000 A=+900 B=38mm C=65mm F=65mm
page 93
Model DESCRIPTION New Price
QT8
8D
QT8
12D
QT1
5 8D
Q51
5 8D
-16
POSI
TIO
NQ
T15
12D
QT2
8 8D
QT2
8 12
DQ
T35
12D
- 24
Posi
tion
QT3
50 1
2D-2
4Pos
ition
QT4
0 12
D-2
4 Po
sitio
nQ
T200
C 1
2DQ
T250
12D
QTN
150
QTN
200/
250/
300/
350
QTN
100/
12 P
ositi
onQ
TN40
0/45
0SQ
T10
SQT1
5/ S
QT1
8MSQ
T28/
30
SQT1
00M
/MS
SQT2
00 1
2DSQ
T200
/250
M 1
6 St
atio
nSQ
T200
/250
MS
SQT3
00M
QTN
100/
150M
&M
SQ
TN20
0/25
0M&
MS
QTN
300/
350M
&M
SQ
TN40
0/45
0MD
UA
L TU
RN
20M
ULT
IPLE
X 61
0/41
0M
ULT
IPLE
X 61
00M
ULT
IPLE
X625
/620
/420
MU
LTIP
LEX
6200
Y 12
DM
ULT
IPLE
X 62
00Y
16D
MU
LTIP
LEX
630/
430
MU
LTIP
LEX
6300
53108010400 Boring Bar Holder $610.00 V53538010200 Boring Bar Holder (0.750”)/ 110-BOH* $870.00 V53468005400 Boring Bar Holder (1.000”).. $790.00 V53478005400 Boring Bar Holder (1.000”).. $770.00 V53578005500 Boring Bar Holder (1.000”) $700.00 V51478001602 Boring Bar Holder (1.000”) $630.00 V53178006101 Boring Bar Holder (1.250”) $950.00 V V53258010500 Boring Bar Holder (1.250”) $720.00 V53468005300 Boring Bar Holder (1.250”) $730.00 V53488006301 Boring Bar Holder (1.250”)/ 630-BOH50* $1,850.00 V53838010900 Boring Bar Holder (1.250”)/ 128-SBH50 $1,800.00 V53178005101 Boring Bar Holder (1.500”) $950.00 V53208015100 Boring Bar Holder (1.500”) $740.00 V V53378010302 Boring Bar Holder (1.500”) $970.00 V V53418010403 Boring Bar Holder (1.500”) $760.00 V V V53418014600 Boring Bar Holder (1.500”) $930.00 V53478005300 Boring Bar Holder (1.500”) $920.00 V53578005300 Boring Bar Holder (1.500”) $890.00 V53618010200 Boring Bar Holder (1.500”)/ 115-BOH40 $740.00 VMZK8211 Boring Bar Holder (1.500”)Thru Coolant $1,440.00 V V V53248010500 Boring Bar Holder (1-1/4”) $1,290.00 V V V53518010200 Boring Bar Holder (1-1/4”)/ 110-BOH40 $720.00 V51488000601 Boring Bar Holder (2.000”) $1,810.00 V V V53308010200 Boring Bar holder (2.000”) $1,940.00 V V V V53428004502 Boring Bar Holder (2.000”) $960.00 V53488006201 Boring Bar Holder (2.000”)/ 630-BOH50 $1,780.00 V53818010200 Boring Bar Holder (2.000”)/128-BOH50 $1,670.00 V V V VMZK8007B Boring Bar Holder (2.000”) $1,100.00 V53678000700/MZK8654
Boring Bar Holder (2.000”) Split (Hinge Type) $1,980.00 V V
MZK8659 Boring Bar Holder (2.000”) Split (Hinge Type) $1,980.00 MZK8660 Boring Bar Holder (2.000”) Split (Cap Type) $1,420.00 MZK8768 Boring Bar Holder (2.500”) $2,050.00 MZK8928 Boring Bar Holder (2.500”) Split (Hinge Type) $2,100.00 V53308000400 Cut Off Holder $1,810.00 V V V V53468000601 Cut Off Holder $1,620.00 V V V53478000900 Cut Off Holder/ 620-COH40 $980.00 V V53488001601 Cut Off Holder/ 630-COH50 $1,690.00 V53518000401 Cut Off Holder/ 110-COH40 $860.00 V V V V53618010400 Cut Off Holder/ 115-COH40 $880.00 V V V53818000401 Cut Off Holder/ 128-COH50 $1,410.00 V V V V53468000900 Cut Off Holder (Z Off set)/ 610-COH40* $760.00 V V53478000600 Cut Off Holder (Z Off set)/ 620-COH40* $980.00 V53638010400 Double Boring Bar Holder (1.0”)/ 115-SBH40 $850.00 V V V53838010800 Double Turn Holder/128-DTH50 $2,100.00 V V V53538010100 Double Turning Holder/ 110-DTH40 $1080.00 V V V V53638010300 Double Turning Holder/ 115-DTH40 $1250.00 V V V V51468002102 Facing Holder $540.00 51478015100 Facing Holder $710.00 51488000900 Facing Holder $1,380.00 V V V53108010300 Facing Holder $590.00 V53208010300 Facing Holder $700.00 V V53258010400 Facing Holder $690.00 V53308010300 Facing Holder $1,780.00 V V V53418010201 Facing Holder $690.00 V53418010500 Facing Holder $680.00 V V V V V V53418014800 Facing Holder $690.00 V53428001800 Facing Holder $890.00 V53428004402 Facing Holder $1,020.00 V53468005500 Facing Holder/ 610-FAH40 $1,020.00 V53478005500 Facing Holder/ 620-FAH40 $760.00 V53488006400 Facing Holder/ 630-FAH50 $1,320.00 V53518010300 Facing Holder/110-FAH40 $930.00 V V V V53568006601 Facing Holder $930.00 V V53578005200 Facing Holder $890.00 V53618010300 Facing Holder/ 115-FAH40 $1,420.00 V V V53678000600 Facing Holder $1,430.00 V53688000600 Facing Holder $1,790.00 V53818010300 Facing Holder.../ 128-FAH50 $1,670.00 V V V53818010100 Forward Turn Holder $1,670.00 V V V53258010200 Forward Turning Holder V
Forward Turn
A
Reverse Turn
B
Boring Bar
C
Facing Holder(right-hand)
D
U-Drill Holder
E
Cut Off Holder(right-hand)
F
Double Turn
G
Double Boring Bar
H
Tool Holder • Mazak
page 94
Model DESCRIPTION New Price
QT8
8D
QT8
12D
QT1
5 8D
Q51
5 8D
-16
POSI
TIO
NQ
T15
12D
QT2
8 8D
QT2
8 12
DQ
T35
12D
- 24
Posi
tion
QT3
50 1
2D-2
4Pos
ition
QT4
0 12
D-2
4 Po
sitio
nQ
T200
C 1
2DQ
T250
12D
QTN
150
QTN
200/
250/
300/
350
QTN
100/
12 P
ositi
onQ
TN40
0/45
0SQ
T10
SQT1
5/ S
QT1
8MSQ
T28/
30
SQT1
00M
/MS
SQT2
00 1
2DSQ
T200
/250
M 1
6 St
atio
nSQ
T200
/250
MS
SQT3
00M
QTN
100/
150M
&M
SQ
TN20
0/25
0M&
MS
QTN
300/
350M
&M
SQ
TN40
0/45
0MD
UA
L TU
RN
20M
ULT
IPLE
X 61
0/41
0M
ULT
IPLE
X 61
00M
ULT
IPLE
X625
/620
/420
MU
LTIP
LEX
6200
Y 12
DM
ULT
IPLE
X 62
00Y
16D
MU
LTIP
LEX
630/
430
MU
LTIP
LEX
6300
53818010100 Forward Turn Holder/ 128-FTH50 $1,670.00 V V V53258010200 Forward Turning Holder POA V53308010100 Forward Turning Holder $1,890.00 V V V53418010700 Forward Turning Holder POA V V V V V53418015000 Forward Turning Holder $1,680.00 V53428004300 Forward Turning Holder $1,300.00 V53468005201 Forward Turning Holder POA V V V53478005200 Forward Turning Holder/ 620-FTH40 $870.00 V V53488006101 Forward Turning Holder/ 630-FTH50 $1,760.00 V53518010100 Forward Turning Holder/ 110-FTH40 $830.00 V V V V53618010100 Forward Turning Holder/ 115 FTH40 $1,030.00 V V V53688000500 Forward Turning Holder $1,780.00 V53108010101 Fwd Turning Holder POA V53208010400 Fwd/Rev Turning Holder POA VEOOP-BA6E020
Nozzles POA V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V
51488000701 Off set Boring Bar Holder $2,660.00 V V V53578005400 Off set Boring Bar Holder $920.00 V53178006201 Off set Boring Bar Holder (1.250”) $2,200.00 V V53678000900 Turning Holder (Optional) $1,480.00 VPDT-MP1-H PDT-MP1-H..H-Type Mill/Drill Unit $5,210.00 V VPDT-MP1-V PDT-MP1-V..V-Type Mill/Drill Unit $4,740.00 V VPDT-MP2-H PDT-MP2-H..H-Type Mill/Drill Unit POA V VPDT-MP2-HTC
PDT-MP3-H PDT-MP3-H..H Type Mill/Drill Unit $7,400.00 V VPDT-MP3-HTC
ER40 PDT-MP3-HTC $16,800.00
V V
PDT-MP3-V PDT-MP3-V..V Type Mill/Drill Unit $6,580.00 V VPDT-SQT1-H PDT-SQT1-H..H Type Mill/Drill Unit $5,200.00 V V V VPDT-SQT1-V PDT-SQT1-V..V Type Mill/Drill Unit $4,750.00 V V V VPDT-SQT2-H PDT-SQT2-H..H Type Mill/Drill Unit POA V V VPDT-SQT2-HDE
PDT-SQT2-HDE..Double End Mill/Drill Unit $8,350.00 V V V
PDT-SQT2-HTC
PDT-SQT2-HTC..H Type Mill/Drill Unit..Through Coolant
POA V V V
PDT-SQT2-V PDT-SQT2-V..V Type Mill/Drill Unit POA V V VPDT-SQT2-VTC
PDT-SQT2-VTC..V Type Mill/Drill Unit..Through Coolant
POA V V V
PDT-SQT3-H PDT-SQT3-H..H-Type Mill/Drill Unit $7,300.00 V V V VPDT-SQT3-V PDT-SQT3-V..V-Type Mill/Drill Unit $6,500.00 V V V V53108010201 Reverse Turning Holder POA V53258010300 Reverse Turning Holder POA V53308010600 Reverse Turning Holder $1,820.00 V V V53418010800 Reverse Turning Holder POA V V V V V53468005101 Reverse Turning Holder $910.00 V V V53478005100 Reverse Turning Holder/620RTH40 $675.00 V V53488006001 Reverse Turning Holder/ 630-RTH50 $1,830.00 V53518010700 Reverse Turning Holder/ 110-RTH40 $920.00 V V V V53618010600 Reverse Turning Holder/ 115-RTH40 $880.00 V V V53688000400 Reverse Turning Holder $1,780.00 V53818010600 Reverse Turning Holder/ 128-RTH50 $1,560.00 V V V51478015401 Socket 1” x 1/2” POA V53448011800 Socket 1” x 1/2” POA V53468006500 Socket 1” x 1/2” POA V V V V V51478002700 Socket 1” x 1MT POA V V53448012100 Socket 1” x 1MT $250.00 V V V V V51478002600 Socket 1” x 2MT $250.00 V V53448012200 Socket 1” x 2MT $250.00 V V V V V51478015201 Socket 1” x 3/4” POA V53448012000 Socket 1” x 3/4” POA V53468006700 Socket 1” x 3/4” POA V V V V V51478015501 Socket 1” x 3/8” POA V53448011700 Socket 1” x 3/8” POA V53468006400 Socket 1” x 3/8” POA V V V V V51478015601 Socket 1” x 5/16” POA V53448011600 Socket 1” x 5/16” $28.00 V53468006300 Socket 1” x 5/16” POA V V V V V51478015301 Socket 1” x 5/8” POA V53448011900 Socket 1” x 5/8” POA V53468006600 Socket 1” x 5/8” POA V V V V V51378011200 Socket 1-1/2” x 1” POA V V V53178011200 Socket 1-1/2” x 1” $260.00 V V V53418011702 Socket 1-1/2” x 1” $345.00 V V V V V V V V53418012402 Socket 1-1/2” x 1” POA V
Tool Holder • Mazak
page 95
Tool Holder • MazakModel DESCRIPTION New
Price
QT8
8D
QT8
12D
QT1
5 8D
Q51
5 8D
-16
POSI
TIO
NQ
T15
12D
QT2
8 8D
QT2
8 12
DQ
T35
12D
- 24
Posi
tion
QT3
50 1
2D-2
4Pos
ition
QT4
0 12
D-2
4 Po
sitio
nQ
T200
C 1
2DQ
T250
12D
QTN
150
QTN
200/
250/
300/
350
QTN
100/
12 P
ositi
onQ
TN40
0/45
0SQ
T10
SQT1
5/ S
QT1
8M
SQT2
8/30
SQT1
00M
/MS
SQT2
00 1
2DSQ
T200
/250
M 1
6 St
atio
nSQ
T200
/250
MS
SQT3
00M
QTN
100/
150M
&M
SQ
TN20
0/25
0M&
MS
QTN
300/
350M
&M
SQ
TN40
0/45
0MD
UA
L TU
RN
20M
ULT
IPLE
X 61
0/41
0M
ULT
IPLE
X 61
00M
ULT
IPLE
X625
/620
/420
MU
LTIP
LEX
6200
Y 12
DM
ULT
IPLE
X 62
00Y
16D
MU
LTIP
LEX
630/
430
MU
LTIP
LEX
6300
51378011500 Socket 1-1/2” x 1/2” $420.00 V V V53178011500 Socket 1-1/2” x 1/2” $240.00 V53418012002 Socket 1-1/2” x 1/2” $240.00 V V V V V V V53418012702 Socket 1-1/2” x 1/2” POA V53418016301 Socket 1-1/2” x 1/2” $460.00 V51378011101 Socket 1-1/2” x 1-1/4” POA V V V53178011100 Socket 1-1/2” x 1-1/4” $250.00 V V V53418011602 Socket 1-1/2” x 1-1/4” $345.00 V V V V V V V V53418012302 Socket 1-1/2” x 1-1/4” $420.00 V53418013300 Socket 1-1/2” x 1MT $250.00 V V V V V V V V V V53418013200 Socket 1-1/2” x 2MT $250.00 V V V V V V V V V V V51378011300 Socket 1-1/2” x 3/4” $430.00 V V V53178011300 Socket 1-1/2” x 3/4” $250.00 V53418011802 Socket 1-1/2” x 3/4” $340.00 V V V V V V53418012502 Socket 1-1/2” x 3/4” POA V53418016101 Socket 1-1/2” x 3/4” POA V51378011600 Socket 1-1/2” x 3/8” $420.00 V V53178011600 Socket 1-1/2” x 3/8” POA V53418012102 Socket 1-1/2” x 3/8” POA V V V V V V V53418012802 Socket 1-1/2” x 3/8” POA V V53418016401 Socket 1-1/2” x 3/8” $440.00 V53418013100 Socket 1-1/2” x 3MT $250.00 V V V V V V V V V V51378011700 Socket 1-1/2” x 5/16” POA V V53418012202 Socket 1-1/2” x 5/16” POA V V V V V V V53418012902 Socket 1-1/2” x 5/16” POA V V53418016501 Socket 1-1/2” x 5/16” $465.00 V51378011400 Socket 1-1/2” x 5/8” $420.00 V V53178011400 Socket 1-1/2” x 5/8” $250.00 V53418011902 Socket 1-1/2” x 5/8” $300.00 V V V V V V53418012602 Socket 1-1/2” x 5/8” POA V53418016201 Socket 1-1/2” x 5/8” $465.00 V53178013100 Socket 1-1/4” x 1” $250.00 V V V V V53258011600 Socket 1-1/4” x 1” POA V V53518012000 Socket 1-1/4” x 1” POA V V V53568007200 Socket 1-1/4” x 1” $250.00 V V53178013401 Socket 1-1/4” x 1/2” $250.00 V V V V V53258011300 Socket 1-1/4” x 1/2” $250.00 V V53518012300 Socket 1-1/4” x 1/2” $250.00 V V V53518013000 Socket 1-1/4” x 1MT $250.00 V V V V V V V V V V53468006100 Socket 1-1/4” x 2MT $250.00 V V53518013100 Socket 1-1/4” x 2MT POA V V V V V V V V V53178013200 Socket 1-1/4” x 3/4” $250.00 V V V V V53258011500 Socket 1-1/4” x 3/4” POA V V53518012100 Socket 1-1/4” x 3/4” $250.00 V V V53568007100 Socket 1-1/4” x 3/4” $250.00 V V53178013501 Socket 1-1/4” x 3/8” $250.00 V V V V V53258011200 Socket 1-1/4” x 3/8” $250.00 V V53518012400 Socket 1-1/4” x 3/8” POA V V V53468006200 Socket 1-1/4” x 3MT $250.00 V V53178013601 Socket 1-1/4” x 5/16” $250.00 V53258011100 Socket 1-1/4” x 5/16” POA V V53518012500 Socket 1-1/4” x 5/16” POA V V V53178013301 Socket 1-1/4” x 5/8” $250.00 V V V V V53258011400 Socket 1-1/4” x 5/8” POA V V53518012200 Socket 1-1/4” x 5/8” $250.00 V V V53428002200 Socket 2” x 1” $410.00 V V V V V V V V V V V51488002100 Socket 2” x 1/2” $410.00 V V V V V V53428002601 Socket 2” x 1/2” $410.00 V53428005100 Socket 2” x 1/2” POA V V V V V53428002000 Socket 2” x 1-1/2” $410.00 V V V V V V V V V V V53428002100 Socket 2” x 1-1/4” POA V V V V V V V V V V53428001900 Socket 2” x 1-3/4” $410.00 V V V V V V V V V V V53428003300 Socket 2” x 2MT POA V V V V V V V V V V V V51488001800 Socket 2” x 3/4” $410.00 V V V V V53428002401 Socket 2” x 3/4” $410.00 V53428004900 Socket 2” x 3/4” $410.00 V V V V V53428003200 Socket 2” x 3MT POA V V V V V V V V V V V V53428003100 Socket 2” x 4MT POA V V V V V V V V V V V V51488001900 Socket 2” x 5/8” $410.00 V V V V V53428002501 Socket 2” x 5/8” $410.00 V53428005000 Socket 2” x 5/8” POA V V V V V51488001700 Socket 2” x 7/8” POA V V V V V53428002301 Socket 2” x 7/8” $410.00 V53428004800 Socket 2” x 7/8” POA V V V V53538012100 Socket 3/4” x 1/2” $250.00 V53538012200 Socket 3/4” x 3/8” $250.00 V53538012300 Socket 3/4” x 5/16” $250.00 V
page 96
Model DESCRIPTION New Price
QT8
8D
QT8
12D
QT1
5 8D
Q51
5 8D
-16
POSI
TIO
NQ
T15
12D
QT2
8 8D
QT2
8 12
DQ
T35
12D
- 24
Posi
tion
QT3
50 1
2D-2
4Pos
ition
QT4
0 12
D-2
4 Po
sitio
nQ
T200
C 1
2DQ
T250
12D
QTN
150
QTN
200/
250/
300/
350
QTN
100/
12 P
ositi
onQ
TN40
0/45
0SQ
T10
SQT1
5/ S
QT1
8MSQ
T28/
30
SQT1
00M
/MS
SQT2
00 1
2DSQ
T200
/250
M 1
6 St
atio
nSQ
T200
/250
MS
SQT3
00M
QTN
100/
150M
&M
SQ
TN20
0/25
0M&
MS
QTN
300/
350M
&M
SQ
TN40
0/45
0MD
UA
L TU
RN
20M
ULT
IPLE
X 61
0/41
0M
ULT
IPLE
X 61
00M
ULT
IPLE
X625
/620
/420
MU
LTIP
LEX
6200
Y 12
DM
ULT
IPLE
X 62
00Y
16D
MU
LTIP
LEX
630/
430
MU
LTIP
LEX
6300
53538012000 Socket 3/4” x 5/8” $250.00 VTLH7606 SPECIAL 2” x 1” U DRILL SOCKET POA V V VTLH7604 SPECIAL 2” X 1-1/2” U DRILL SOCKET POA V V VTLH7605 SPECIAL 2” X 1-1/4” U DRILL SOCKET POA V V VTLH7607 SPECIAL 2” x 3/4” U DRILL SOCKET POA V V VTLH7307 Special 40mm x 1” $510.00 V V V V V V V VTLH7544 Special 40mm x 1” U Drill Socket $515.00 V V V V V V VTLH7306 Special 40mm x 1-1/4” U Drill Socket $510.00 V V V V V V V VTLH7545 Special 40mm x 1-1/4” U Drill Socket $515.00 V V V V V V VTLH7308 Special 40mm x 3/4” U Drill Socket $515.00 V V V V V V V VTLH7543 Special 40mm x 3/4” U Drill Socket $515.00 V V V V V V VMZK8537 Boring Bar Holder Split (2.000”) $1,980.00 53478031300 Swiss Turn (Forward) $890.00 V53478031401 Swiss Turn (Reverse) POA V53428009000 Tandem Turn Holder POA VMZK7220B Tandem Turn Holder $1,980.00 V VMZK7220C Tandem Turn Holder POA VMZK8740 Tandem Turn Holder POA V53108000600 Turning Block $110.00 V53208000201 Turning Block $92.00 V V53788002110 Turning Block $180.00 V51488000800 Turning Holder $1,580.00 V V V53468001000 Turret Cap/610-CAP40 $110.00 V V V53478000800 Turret Cap $110.00 V V V V V V V V53488001700 Turret Cap/630-CAP50 $210.00 V V53518000600 Turret Cap/110-CAP40 $110.00 V V V V V V V V53818000701 Turret Cap $185.00 V V V V0352SET0420 Turret Clamp Set $165.00 V53418015200 U - Drill Holder (40mm) $960.00 V53418013901 U - Drill Socket 1-1/2” x 20 POA V53428002800 U - Drill Socket 2” x 32 POA V V V V V53108010500 U Drill Holder $590.00 V53258010600 U Drill Holder POA V51488001000 U Drill Holder (2”) $1,750.00 V V V53428004701 U Drill Holder (2”) POA V51478001900 U Drill Holder (20mm) $700.00 V53468005700 U Drill Holder (20mm)/ 610-UDH40* $980.00 V51478001800 U Drill Holder (25mm) $700.00 V53468005800 U Drill Holder (25mm)610-UDH40 $970.00 V53178006300 U Drill Holder (32mm) POA V V53518010500 U Drill Holder (32mm)/110-UDH40 POA V53178005200 U Drill Holder (40mm) $980.00 V53208015200 U Drill Holder (40mm) $890.00 V V53308010500 U Drill Holder (40mm) $1,800.00 V V V53418010600 U Drill Holder (40mm) $760.00 V V V53478005700 U Drill Holder (40mm)/ 620-UDH40 $980.00 V53488001801 U Drill Holder (40mm)/ 630-UDH50 $1,820.00 V53618010500 U Drill Holder (40mm)/ 115-UDH40 $860.00 V53818010500 U Drill Holder (40mm)/ 128-UDH50 POA VMZK8894 U Drill Holder (1.500”) $1,850.00 MZK8893 U Drill Holder (2.000”) $1,850.00 53428002900 U -Drill Socket 2” x 25 POA V V V V V53518003200 U Drill Socket 32 x 25 $420.00 V53208010100 U-Drill Holder $960.00 V V V53418013801 U-Drill Socket 1-1/2” x 25 $440.00 V53418013701 U-Drill Socket 1-1/2” x 32 POA V53428003000 U-Drill Socket 2” x 20 POA V V V V V53428002700 U-Drill Socket 2” x 40 $500.00 V V V V V53258001700 U-Drill Socket 32 x 20 $360.00 V V V53518003300 U-Drill Socket 32 x 20 POA V53258001800 U-Drill Socket 32 x 25 POA V V V V53208001000 U-Drill Socket 40 x 20 POA V V V V V V V V V53418003601 U-Drill Socket 40 x 20 $420.00 V V V V V V V V53208001100 U-Drill Socket 40 x 25 $410.00 V V V V V V V V V53418003501 U-Drill Socket 40 x 25 POA V V V V V V V V53208001200 U-Drill Socket 40 x 32 $410.00 V V V V V V V V V53418003401 U-Drill Socket 40 x 32 $420.00 V V V V V V V V53568006101 Z Off set Turning Holder $1,780.00 V53578005700 Z Off set U Drill Holder (40mm)/ 620-UDH40* $620.00 V
Quick Change Clamping System Quick Change Clamping System
Specifi cations: (unit: mm) 5000 RPM
Machine Model D XCapacity
S A B C F G M Price
TW8 TW8-DF42NA-16-60 42 1-10ER16
30 87 75 76 43 31 60 $CALL
Specifi cations: (unit: mm) 6000 RPM
Machine Model D XCapacity
S A B C E Price
TW8 TW8-DA42NA-ER16 42 1-10ER16
30 46.5 35.5 75 60 $CALL
Turning Holder
Specifi cations: (unit: mm)
Machine Model X A B C E F Price
TW8/ WT-100
WT100-C20-62 20 87 62.5 39.5 22 20 $CALL
page 109
Boring Bar Holder
Specifi cations: (unit: mm) External CoolantMachine Model X A B C M PriceWT-150 WT150-B25-75 25 95 85 83 75 $CALL
TW8/ WT-100 TW150-B25-60 25 77.5 62 79 60 $CALL
Specifi cations: (unit: mm) Internal Coolant
Machine Model X A B C M PriceWT-150 WT150-B25-75-A 25 95 85 83 75 $CALL
TW8/ WT-100 TW150-B25-60-A 25 77.5 62 79 60 $CALL
Specifi cations: (unit: mm) External CoolantMachine Model X A B C M PriceWT-150 WT150-B32-70 32 97 80 83 70 $CALLTW8/ WT-100 TW150-B32-60 32 86 62 79 60 $CALL
Specifi cations: (unit: mm) Internal CoolantMachine Model X A B C M PriceWT-150 WT150-B32-70-A 32 97 80 83 70 $CALL
TW8/ WT-100 TW150-B32-60-A 32 86 62 79 60 $CALL
Specifi cations: (unit: mm) External CoolantMachine Model X A B C M M1 Price
WT-150 WT150-Z7418 25 102 80 83 47.5 82.5 $CALL
Specifi cations: (unit: mm) External CoolantMachine Model X A B C G E F PriceWT150 R1432-R20-R 20 101 80 41.5 - 22 20 $CALL
Specifi cations: (unit: mm) External CoolantMachine Model X A B C G E F PriceWT-100 WT100-R21430-R20 20 98 66 39.5 - 21 20 $CALLWT150 WT150-R1431-R20 20 101 80 41.5 - 22 20 $CALLWT150 WT150-R1431-R25 25 106 80 46.5 41.5 26 25 $CALLWT300 WT300-W2431 25 135 93 48 - 27 25 $CALL
Cutting Holder
Tool Holder • NAKAMURA TOME
Boring Bar HolderSpecifi cations: (unit: mm) External CoolantMachine Model X A B C M Price SUPER-WT150
SP-WT-150-B31.75-70 IN 1.25 3.82 3.54 3.54 2.76 $CALL
SP-WT-150-B32-70 MM 32 97 90 90 70 $CALL
SP-WT-150-B38.1-75 IN 1.5 4.21 3.62 3.58 2.95 $CALL
SP-WT-150-B38.1-75 MM 40 107 92 91 75 $CALL
Specifi cations: (unit: mm) Internal CoolantMachine Model X A B C M Price SUPER-WT150
SP-WT-150-B31.75-70-A IN 1.25 3.82 3.54 3.54 2.76 $CALL
SP-WT-150-B32-70-A MM 32 97 90 90 70 $CALL
SP-WT-150-B38.1-75-A IN 1.5 4.21 3.62 3.58 2.95 $CALL
D X S A B C E G M Model Price45 1-16 ER25 42 95 72 79.5 53 29.5 65 ABX-DF45-25-65 $Call45 1-16 ER25 42 95 72 79.5 53 29.5 65 ABX-DF45-25-65I $Call45 1-16 ER25 42 116 72 79.5 53 29.5 85 ABX-DF45-25-85 $Call
Specifi cations: MAX RPM 4000
D X S A B C F E G M Model Price45 1-16 ER25 42 95 72 80.5 80.5 53 30.5 65 ABX-DF45-25-65D $Call45 1-13 ER20 35 95 72 78.5 78.5 53 28.5 65 ABX-DF45-20-65D $Call45 1-16 ER25 42 116 72 80.5 80.5 53 30.5 85 ABX-DF45-25-85D $Call
Specifi cations: MAX RPM 5000
D X S A B C E G M Model Price45 1-10 ER16 30 84 96 82.5 55 27 24 ABX-DA45-16DY $Call
Specifi cations: MAX RPM 4000
D X S A B C E F G M Model Price45 1-10 ER16A 19.5 ±90° 72 92 55 43 12 66 ABX-DA45-16BAC $Call
Specifi cations: Internal Coolant MAX RPM 5000
D X S A B C E F G M Model Price45 1-16 ER25 42 116 72 79.5 53 75.5 29.5 85 ABX-CW-DF45-25-85 $Call
For MIYANO (Off set) BNE-34S, BNE-51S
Specifi cations: MAX RPM 3500
Model D X Capacity S A B C G M PriceBNE-34SBNE-51S
BNE-DB38ER20
38 1-13mmER-20 1/8”-1/2”
35 112 74 18 17 90 $2,790.00
For MIYANO Radial HolderBNC
Specifi cations: MAX RPM 5000
D X S A B C E F G M Model PriceBNC 38 1-10 ER16 30 87 70 65 57 129.5 27 59 BNC-DA38-ER16 $1210.00
X A B C M M1 Model Price25 105 92 72 50 85 BNE-B25x2-85 $Call
Specifi cations: External Coolant
X A B C M Model Price25 88 72 105 85 BNE-B25x2-85 $Call
Internal Coolant also available upon request.
page 125
Specifi cations: External Coolant
Machine X A B C F M Model PriceLX-06E2 25 97 88 83.5 22 55 LX-06E2-B25-55 $Call
For WASINO A-12VDI Tool Holder For WASINO®
Specifi cations: (Maximum RPM: 6000)
Machine D Model X Capacity S A B C E H PriceA-12 55 DA55WA-ER20 ER-20 1-13mm 35 63 25 58 63 25.8 $1,390.00A-12 55 DA55WA-ER32 ER-32 2-20mm 50 67 29 58 63 25.8 $1,390.00
Axial Milling & Drilling Head
Radial Milling & Drilling Head
Specifi cations: (Maximum RPM: 5000)
Machine D Model X Capacity S A B C G M H PriceA-12 55 DF55WA-20-55 ER-20 1-13mm 35 87 83 73 29 55 25.8 $2,200.00A-12 55 DF55WA-32-55 ER-32 2-20mm 50 87 83 77 33 55 25.8 $2,200.00
MIYANO Boring Bar HolderBNJ
Specifi cations: External Coolant
X A B C E F M Model Price25 55 84 47 49 16 30 2K749001-BNJ-B25-30 $Call
Internal Coolant type is also available upon request.
MIYANO Cutting HolderBNJ
Specifi cations: External Coolant
X A B C E F M Model Price25 115 70 103 38 38 25 1X784700-R20 $Call
Models D X DIN 6358 S A B C G M Model PriceBMT65 65 22(mm) 40 108 94 77 31 72 DW300-DF65-22C-72 $callBMT65 65 22(mm) 40 121 94 77 31 85 DW300-DF65-22C-85 $call
DOUBLE TURNING HOLDER TYPE DAEWOO Specifi cations:
X A B C E F G M Model PriceBMT55 mm 20 176 86 55 37.5 50.5 30 20 DW230-C20x2-30-W100 $741.00BMT55 mm 25 188 90 80 44 50.2 30 25 DW230-C25x2-30-W100 $741.00
D A B E M M1 Model PriceBMT55 mm 25 105 86 121 60 100 DW230-B25x2-100-B $Call inch - - - - - - -BMT65 mm 25 126 95 127 65 105 DW300-B25x2-105-B $715.00
inch - - - - - - -BMT65 mm - - - - - - -
inch 1” 4.96” 3.74” 5.75” 3.35” 4.72” DW300-B25.4x2-120 $715.00
Specifi cation: Unit:mm / Max rpm: 3000Model BT Holder Model CAT Holder Model SK Holder D S L A B C E F G H PriceBT40AHER32195 C40AHER32195 SK40AHER32195 2-20 60/65 195 44 78.2 62.8 113 80 36 88 $5,140.00BT50AHER32195 C50AHER32195 SK50AHER32195 2-20 80/85/100 195 44 78.2 62.8 111 80 36 88 $5,700.00
Gromax Tooling System
ANGLE HEAD
HSK HOLDERS FOR TURNING MILLSI.D. HSK HOLDER FOR TURNING MILLS Unit: mm
Model D1 D2 L1 L2 M Price
HSKA63WHB08-65 28 8 65 40 M8 $280.00
HSKA63WHB10-70 35 10 70 45 M8 $280.00
HSKA63WHB12-70 42 12 70 45 M8 $280.00
HSKA63WHB16-75 48 16 75 50 M10 $280.00
HSKA63WHB20-75 52 20 75 50 M10 $280.00
HSKA63WHB25-83 62 25 83 58 M12 $290.00
HSKA63WHB32-87 62 32 87 62 M12 $290.00
HSKA63WHB40-97 65 40 97 72 M16 $290.00
O.D. HSK HOLDER FOR TURNING MILLS Unit: mm
Model L L1 H H1 H2 h PriceHSKA63W-ETA2525-105 105 65 25 32 51 38 $630.00
Unit: mm
Model L L1 H H1 H2 h PriceHSKA63W-ETN2525R-115 105 65 25 32 51 38 $630.00
Unit: mm
Model L L1 H H1 H2 h PriceHSKA63W-ETH2525-90 105 65 25 32 51 38 $630.00
Unit: mm
Model L L1 H H1 H2 h PriceHSKA63W-ETV2525R-125 105 65 25 32 51 38 $630.00
CNC Tooling System • Angle Head
page 136
Boring Heads
Model ECK No. D1 L D (Boring Range) Cutter (T) Price
0.5-1.0 0.5-1 v1.0-1.5 1-2 v v v1.5-2.0 2-3 v v v v2.0-2.5 3-4 v v v v v2.5-3.0 4-5 v v v v v3.0-3.5 5-6 v v v v v3.5-4.0 6-7 v v v v v4.0-4.5 7-8 v v v v v4.5-5.0 8-9 v v v v v5.0-5.5 9-10 v v v v v5.5-6.0 10-11 v v v v6.0-6.5 11-12 v v v v6.5-7.0 12-13 v v v v
13-14 v v v14-15 v v v15-16 v v v16-17 v v17-18 v v18-19 v v19-20 v v20-21 v21-22 v22-23 v23-24 v24-25 v25-26 v
Unit: mm
COLLET LEVEL RUNOUT
AA 0.007MM / 0.00028”
A 0.01MM / 0.00039”
SD PRECISION COLLET AVAILABLE UPON REQUEST
page 144
From:Gromax Enterprises Corp.17335 Daimler Street, Irvine, CA 92614Website: www.gromaxonline.com, www.gromaxlaser.comE-Mail: [email protected] Toll Free:1-800-343-3508 Los Angeles:949-833-1199 Fax:949-833-0099
* All prices and specifi cations subject to change without notice.