You Can’t Buy A Better Reel. Family owned and operated since 1933 Firefighting Reels | Preconnect or Storage | No Draining, Stacking, or Dragging | All Sizes and Capacities | | Efficient Use of Vehicle Space | Increased Hose Capacity | Faster Clean-up | ARFF |
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
You Can’t Buy A Better Reel.
You Can’t Buy A Better Reel.
Family owned and operated since 1933
Firefighting Reels| Preconnect or Storage | No Draining, Stacking, or Dragging | All Sizes and Capacities |
| Efficient Use of Vehicle Space | Increased Hose Capacity | Faster Clean-up | ARFF |
Types of reels:Booster Hose Reels – Quick first-attack for small fires or while larger volume hoses are being set up.
LD (Large Diameter) Reels – Reels for long lengths of 1-½" to 6" collapsible hose.
Dual Agent Reels – For firefighting with foam.
NEW Swing-Out Reels – For aircraft rescue firefighting applications.
Top performance. Extreme conditions. Hannay Reels. Safety and quick response time are critical when it comes to fighting fires. Our reels make payout and pickup quicker so you can work more efficiently and effectively when every second counts. That’s why Hannay Reels is the #1 reel company specified by OEMs and professionals worldwide, based on product reliability, ease of use, and long life. When it comes to keeping your crew and your community safe, you can trust Hannay Reels.
Attention Truck Committees and Specifiers of Fire Apparatus Products shown and described in this catalog are suggested models for broad use applications throughout the firefighting industry. All models can be assembled to dimensionally fit your unique applications and space requirements, and all our components are designed for multiple configurations.
For special orders, contact your Hannay dealer or call our Inside Sales Group.
Reel Type I.D. Hose Sizes PageHow to Specify Hannay Reels 3Manual or Power Rewind Reels
Series F4000 3/4" or 1" 4Series F4100 3/4" or 1" 5Series F 3/4" or 1" 6-7Series SF 3/4" or 1" 8-9Twin Fire Reel Conversion Kit 10Series FF - Booster Hose
Collapsible Hose1-1/4" or 1-1/2" 1-1/2" or 1-3/4"
10-11
Series F7100 - Dual Hose 3/4" – 1-1/2" 12-13Swing-Out Reel - Single Hose
Optional Location of ComponentsLocation of the inlet, outlet riser, and rewind mechanism can be varied to meet your requirements and must be specified on your order. The drawings below show the component locations. Unless otherwise specified, most reels will be shipped as Right Top Rewind with the inlet, outlet riser, and rewind mechanism on the operator’s right.
RT – Right Top RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s right. Hose unwinds from the top of the reel.
RB – Right Bottom RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s right. Hose unwinds from the bottom of the reel.
LT – Left Top RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s left. Hose unwinds from the top of the reel.
LB – Left Bottom RewindReels have the inlet, outlet riser, and rewind mechanism on the operator’s left. Hose unwinds from the bottom of the reel.
Optional Motor LocationsElectric rewind motors can be installed in any of the positions shown in these drawings. The Bottom Rear position is standard. The motor is installed inside the frame on Model ESF reels, which are designed for installation in restricted space.
Optional Auxiliary Rewind PositionsHorizontal ring and pinion gear crank rewind mechanism is the standard configuration.
Optional positions include vertical and 30° above centerline, as shown in these drawings. Both are available at extra cost and must be specified.
Standard – Always look at your reel from this position to determine right-hand or left-hand.
Standard for 1500, 1800, 2000 & 4000 Series reels.
Horizontal (Standard)
Bottom Rear(Standard)
BottomFront
Elevated 2 O’clock(REF Reels)
Elevated 10 O’clock(REF Reels)
Inboard(ESF Reels)
Vertical 30° Angle
Note: Use component location initials as suffix after model number (ie; EF32-23-24 RT)
High Mount
Low Mount
Optional Roller PositionsOptional roller assembly mounting kits, up to 2 of either, can be mounted per reel. Consult factory, and indicate installation location – front or rear of reel.
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models. (does not apply to FedEx or UPS):
Net lbs/kg Ship lbs/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8
4. Dimension “F” is the overall length of standard model reels. On crank rewind models, the dimension shown is with the crank in rewind position. Reels require 3-1/2" clearance to remove crank handle.
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose.
E = Electric Rewind (1/3 HP) – 12v and 24v DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. Be sure to check dimensions and weights prior to ordering.
7. Some roller options may prohibit the use of our molded chain guard.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground).
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8
4. Dimension “F” is the overall length of standard model reels.
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose.
E = Electric Rewind (1/3 HP) – 12v and 24v DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. Be sure to check dimensions and weights prior to ordering.
MANUAL OR POWER REWIND REELS
To handle single 3/4" or 1" I.D. hose.• Lightweight, compact reels designed for long lengths
of hose in manual and power rewind.
• Gear-driven crank rewind handle is removable.
• Chain and sprocket drive powered by electric, hydraulic or compressed air motor.
To handle 3/4" or 1" I.D. hose.• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• Super Booster®(SBF) polished aluminum construction reel weighs up to 30% less than standard booster reel. Prefix complete model number with "SB" when ordering. See Note 6 on page 7.
• Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic or compressed air motor.
• Pinion brake standard.
• Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads.
• Standard outlet: 1" male NST threads. (1.375" x 8 threads per inch.)
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
• Rollers and roller mounting brackets are accessory items. Specify roller position.
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +250°F (-32°C to+121°C).
• Consult factory for reels to operate at other pressures and temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
For Booster Hose
MANUAL OR POWER REWIND REELS
Shown with optional red finish and optional roller and spool assembly
Hub Assembly OptionsThe hub assembly is the heart of the hose reel. It includes the outlet riser, the reel axle, and the threaded inlet to which the swivel joint is attached. The swivel joint permits the reel to rotate freely while connected to the fluid source.
The outlet riser is engineered to conform to the contour of the drum so the hose lies smoothly against the drum without kinking. Smooth interior surfaces are flow-contoured for unrestricted flow and minimal pressure loss through the reel.
A 2-way flow hub assembly is available on certain models as an option. On this assembly, the reel axle is threaded on both ends so the swivel joint can be attached at either end to match piping. A pipe cap is supplied to seal the opposite end.
Twin Fire Reel Conversion Kit is also available. Refer to page 10.
PARTS DRAWING: SERIES F – ISO 84; SERIES SBF SUPER BOOSTER®– ISO 122
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension for 1/2 HP motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling 175' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
*** X, Y indicate mounting holes.
Notes: 1. Specifications subject to change.
2. A 2-way flow hub is available at no extra cost and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end. (See Ordering & Accessory Guide.)
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose. E = Electric Rewind (1/3 HP) EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBEF 32-19-21).
7. When installing FH-3 rollers, add 4-1/2" to the “D” dimension.
8. Be sure to check dimensions and weights prior to ordering.
To handle 3/4" or 1" I.D. hose.• Inboard motor location high profile.
• Standard booster hose reel is steel, painted graphite. Aluminum or stainless steel construction is also available.
• Super Booster®(SBSF) polished aluminum construction reel weighs up to 30% less than standard booster reel. Prefix complete model number with "SB" when ordering. See Note 6 on page 9.
• Choose chain and sprocket rewind powered by either electric or compressed air motor.
• Pinion brake standard.
• Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads.
• Standard outlet: 1" male NST threads (1.375" x 8 threads per inch).
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
• Rollers and roller mounting brackets are accessory items. Specify roller position.
• Pressures to 1000 psi (69 bar).
• Temperatures from -25°F to +250°F (-32°C to+121°C).
• Consult factory for other pressures and temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
Standard configuration shown
For Booster Hose
MANUAL OR POWER REWIND REELS
Hub Assembly OptionsThe hub assembly is the heart of the hose reel. It includes the outlet riser, the reel axle, and the threaded inlet to which the swivel joint is attached. The swivel joint permits the reel to rotate freely while connected to the fluid source.
The outlet riser is engineered to conform to the contour of the drum so the hose lies smoothly against the drum without kinking. Smooth interior surfaces are flow-contoured for unrestricted flow and minimal pressure loss through the reel.
A 2-way flow hub assembly is available on certain models as an option. On this assembly, the reel axle is threaded on both ends so the swivel joint can be attached at either end to match piping. A pipe cap is supplied to seal the opposite end.
2. A 2-way flow hub is available at no extra cost and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end. (See Ordering & Accessory Guide.)
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models (does not apply to FedEx or UPS):
Net lbs/kg Ship lbs/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose. E = Electric Rewind (1/3 HP) EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBESF32-19-21).
7. All frames are rollformed channel, except Super Booster®, which is square tubing.
8. Be sure to check dimensions and weights prior to ordering.
To handle 1-1/4" or 1-1/2" I.D. booster hose or 1-1/2" or 1-3/4" I.D. collapsible hose.• Standard booster hose reel is steel, painted graphite.
Aluminum or stainless steel construction is also available.
• Super Booster®(SBFF) polished aluminum construction reel weighs up to 30% less than standard booster reel. Prefix complete model number with "SB" when ordering. See Note 6 on page 11.
• Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic or compressed air motor.
• Pinion brake standard.
• Standard inlet: 1-1/2" 90° ball bearing swivel joint with 1-1/2" female NPT threads and 2" Victaulic® groove.
• Flanged outlet riser.
• Standard outlet: 1-1/2" male NST threads. (1.990" x 9 threads per inch.)
• Consult factory for other sizes and/or threads.
• Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
• Rollers and roller mounting brackets are accessory items. Specify roller position.
• Pressures to 600 psi (41 bar).
• Temperatures from -25°F to +175°F (-32°C to +79°C).
• Consult factory for other pressures and temperatures.
CAUTION: When using Niedner hose, a special riser and/or larger drum diameter is required.
See chart for capacity on page 20, or consult factory.
• Large Diameter Booster Hose • Preconnected Collapsible Hose
MANUAL OR POWER REWIND REELS
Shown with optional polished aluminum
construction
For Series F and FF.Twin booster hose reels combine matched F or FF Series reels in a single unit with a center-mounted roller and spool assembly. Hose from both reels can be used on either side of the truck. Rugged unit frame construction maintains alignment and simplifies installation when two reels are combined.
Consult dealer or factory for more information.
Optional
High mount top wind position
TwinFireReel Conversion Kit For Booster Hose
Two F Series reels, a Twin Fire Reel Conversion Kit, and two optional
2. Dimensions up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames, except Super Booster®, which is square tubing.
3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models.
Net lbs/kg Ship lbs/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1
5. When ordering power rewind models, prefix model number with: A = Air Rewind – supplied with control valve
and 18” air hose. EP = Electric Rewind (1/2 HP) – 12v and 24v
DC rewind reels supplied with switch and solenoid. 115v AC rewind reels are not supplied with switch, but can be ordered separately.
HD = Hydraulic Rewind – not supplied with control valve.
6. For polished aluminum reels, prefix complete model number with “SB” (for example: SBEPFF28-23-24).
7. Be sure to check dimensions and weights prior to ordering.
Series FF/SBFFMANUAL OR POWER REWIND REELS
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
For Single or Dual Agent 1" through 1-1/2" I.D. hose.Hose reels used primariliy in ARFF firefighting applications. These reels mount inside truck cabinets and are designed to swing out for ease of operation and accessibility. Equipped with 2 pin locks to lock reel in stored position as well as 90° to cabinet for forward deployment of hose line.
• 12v or 24v DC explosion-proof motor.
• Heavy-duty square tubing frame.
• Auxiliary bevel gear crank rewind with pinion brake.
• Inlet 90° FxF swivel joint.
• Outlet MNST is standard (other threads available).
• Swing-out frame includes bearings and brackets for swing mount.
Two reels installed in the hose bed. In this arrangement, the upper reel is unloaded only if necessary. Payout and rewinding of the upper reels are facilitated by the position of the lower reel. Two reels with larger-diameter discs and narrower drums can also be installed side-by-side in the rear of the hose bed to handle approximately the same amount of hose. This method allows a center walkway or paying out two lines simultaneously if required.
Single large-capacity reel installed in the hose bed area to handle long lengths of pre-coupled hose. Hose pays out from the top of the reel so gravity assists unwinding.
Reels and spools to handle up to 6" I.D. collapsible hose.Typical Installations:
• Square tubing frames.
• Heavy-gauge steel discs.
• Drums are formed by reinforced tie rods with radial supports.
• Pillow block ball bearings.
• Chain and sprocket rewind with electric (12v or 24v) or hydraulic rewind motor.
• Hydraulic caliper disc brake.
Hydraulic Requirements• It is important that the end-user provide Hannay Reels with
complete specifications as to the required operation of the large diameter reel being specified. Any speed and torque requirements MUST be known to properly specify the correct reel for the application.
• Hannay Reels does not recommend specific brands for hydraulic system components. We suggest you work with your hydraulic component supplier to meet your specs.
Custom Reels• The standard models listed represent the most frequently
specified customer requirements for handling large-diameter fire hose. Because of the many possible variations in reel installation and hose capacity requirements, we will also custom build reels and spools to your specifications to become an integral part of the apparatus. Reels are built of steel construction, and various finishes are available.
Consult factory for complete specifications on an LD reel to meet your requirements.
Important: Hose capacity is based on the flat hose dimensions listed below, with couplings at 100 foot intervals.
Flat Hose Dimensions
Thick x Width I.D. in mm
1" 1/2 x 1-3/4 12.7 x 44.4
1-1/2" 3/4 x 3 19.0 x 76.2
1-3/4" 7/8 x 3-1/4 22.2 x 79.4
2" 3/4 x 3-1/2 19.0 x 88.9
2-1/2" 3/4 x 4 19.0 x 101.6
3" 1/2 x 5 12.7 x 127.0
4" 1/2 x 6-1/2 12.7 x 165.1
5" 1/2 x 8 12.7 x 203.2
6" 1/2 x 10 12.7 x 254.0
Custom sizes are available to meet specific needs.
Complete reel assembly with No. 50 chain and sprocket and hydraulic rewind motor mounted inside the frame. When ordering, use prefix model number with HD (for example: HDLD 350-64 version F).
Version G Reel:
(High profile) complete reel assembly with chain and sprocket drive and electric rewind motor, including clutch and double reduction unit. Motor is mounted inside the frame. Disc diameters (E dimension) up to and including 39" only. When ordering, use prefix model number with EP (for example: EPLD 242-39 version G). “F” dimension = “A” dimension +5".
Notes:1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
3. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
* The “F” dimension for these models is shown for 1/3 HP motors. Add 2" to “F” dimension for 1/2 HP motors. The “F” dimension for all other reels is shown for 1/2 HP. Reels handling 200' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
Firefighting and rescue operations around the country depend on the versatility of Hannay Reels.For decades, Hannay Reels has set the standard of quality and reliability for hose reels in the firefighting industry.
But as the needs of the industry change, so do our reels. Hannay prides itself on being able to conform to new standards required by the firefighting industry – reels that fit into side compartments or bumper mounts, open reel installation or swing-out reels for easy, quick access.
Through research and development of internationally recognized standard models, to custom one-of-a-kind applications, Hannay continues to meet the specific needs of the vehicle or individual fire department.
In supplying both apparatus manufacturers and aftermarket fire departments worldwide, Hannay has consistently serviced the needs of the industry. With Hannay reels, there’s no draining, stacking or dragging. Plus, firefighters appreciate quick attack and fast pick-up.
Hannay Reels 3-Year Limited WarrantyProducts manufactured by Hannay Reels, Inc. (“Hannay”) are warrantied for 3 years from date of shipment when properly installed, maintained, and operated in accordance with Hannay instructions. In no event will Hannay have a warranty obligation for normal wear and tear, or for products that have, at Hannay’s determination, been subjected to accident, abuse, misapplication, improper installation or improper maintenance. Common examples of normal wear and tear would include paint finish, swivel joint seal wear, and switch or motor brush wear.
Hannay makes no warranties, express or implied, other than those included in this warranty statement, and we disclaim any implied warrant of merchantability or fitness for any particular purpose. Hannay will not be liable for any consequential, incidental, or indirect damages from any cause whatsoever.
Failure to use a flexible inlet connection on any live hose reel will void the swivel joint warranty. Failure to use a properly sized circuit breaker with any electric rewind motor will void the electric motor warranty. Failure to use a filter and lubricator on any air rewind motor will void the air motor warranty. Failure to follow all procedures outlined in the Safety Guidelines document will void the warranty.
Components not manufactured by Hannay will be subject to the original manufacturers’ warranties. Examples of such components include: hose and cable, motors, speed controls, and switches, swivel joints and seals, slip ring and brush assemblies.
Equipment which proves to be defective upon our inspection will be replaced free of charge, including freight to the customer. Our responsibility ceases upon delivery to any common carrier and we do not, unless previously instructed, insure shipments beyond point of delivery to such carrier. No material will be accepted for return without a return goods authorization (RGA). This warranty extends to the replacement or repair of the reel or part (no labor).
Hannay reserves the right to modify or alter materials, dimensions, design, and construction when necessary to improve the performance of the reel and/or accessories, or to meet delivery requirements.
Notice on Reel FinishStandard finish on Hannay reels is a high performance modified acrylic enamel paint. Standard color is metallic graphite. Other colors available at no additional cost include red, white, black, and primer.
Most of the major components on standard reels are e-coated prior to receiving final topcoat paint finish. This combination of e-coat and enamel topcoat will meet the finish requirements of most customer applications and environments.
In cases where requirements cannot be met with the standard finish, Hannay Reels can coat any model reel with an automotive primer, allowing application of final coating at your facility. Alternatively, Hannay Reels can provide a quote for matching a customer-provided paint specification. For further information, please contact your Hannay Reels sales engineer and a special paint request form will be sent to you.
For environments where no paint finish is suitable, we offer both aluminum and stainless steel (304 grade) construction on most reel models.
Return Goods PolicyAll Hannay reels are built to order. These orders are typically placed into production within 1 business day of receipt. Once production begins, it may not be possible to cancel the order.
To prevent returns because the wrong reels or parts were ordered, please use the Hannay Reels Spec Worksheet (either online or from our Order Accessory Guide) when specifying reels. Be sure to include any size, weight, pressure and/or material compatibility limitations for the application.
In the event that an item does need to be returned for credit, repair or replacement, prior approval must be obtained from Hannay Reels. Upon your request, we will send a Return Goods
Authorization (RGA) form. A signed copy of this form must accompany the material when returned to us, with the RGA number clearly showing on the outside of the box—a label is provided to you that you can print and attach. No product will be accepted for return or credit without an authorized RGA number.
All material must be returned prepaid, unless otherwise noted on our RGA. No return will be accepted that has been damaged due to improper return packaging, tampered with or altered from its original condition. Our restocking and handling fee is a minimum of 25% for standard catalog reels and parts. Custom reels specially built to customer specifications cannot be returned for any reason.
HoseReel SpecWorksheetTo specify Hannay reels, fill out this simple form and mail, fax or email it to your dealer.
Photocopy this page or download and print from hannay.com
HOW DO I GET THE RIGHT HOSE REEL?
For custom applications not found in our catalogs, call the Inside Sales Group at 518-797-3791.
1. Who is the reel for?
Contact Date / /
Company Position
Street Address
City State Zip Country
Phone ( ) Fax ( ) Email
Drag Position SR
Constant tension available on all roller positions
Lift Position VR
Stretch (no roller) Position TR
Wall Mount Position TR
Recovery (pick-up) (no roller)
5. Please note size and/or weight limitations for your installation
SPECIFICATIONS
Depth:
Height:
Width:
Weight:
Note: Use component location initials as suffix after model number (ie: EF32-23-24 RT)
4. Specifying Location of Components
Optional Location of Components:
Location of the inlet, outlet riser, and rewind mechanism can be varied to meet your requirements and must be specified on your order. Unless otherwise specified, most reels will be shipped as Right Top Rewind with the inlet, outlet riser, and rewind mechanism on the operator’s right.
RT – Right Top Rewind Standard – Always look at
your reel from this position to determine right hand or left hand.
RB – Right Bottom Rewind
LT – Left Top Rewind
LB – Left Bottom Rewind
Indicate your custom specifications
3. What features does the reel need? Check type of rewind:
MANUAL REWIND
Disc rewind (hand over hand) Gear-driven crank Direct crank (permanent or removable) Chain-driven crank
POWER REWIND
Spring Air Electric (voltage): Hydraulic
Type of installation (check one): Floor Wall Overhead Vehicle
hose reels• Live electric cable reels• Power rescue tool reels• Portable electric
cable reels
View all our reel catalogs online at hannay.com
Only one reel is built strong to last long. Our reels are custom designed to meet your unique specs, never retrofitted to the job. So no matter how small the footprint, you can expect superior performance every time. And we only use high quality, heavy-duty materials – never plastic – which is why our reels often outlast the vehicles they’re on. For reels that outlast and outperform all the others, you can depend on Hannay, the leader in OEM, industrial, and commercial reel applications.
You Can’t Buy A Better Reel.
Family owned and operated since 1933
Find reels for every need.Learn more about all of our reels, including specs, drawings, and even
how to select the right reels and accessories for your industry.
Family owned and operated since 1933, Hannay Reels is the world leader in both OEM and aftermarket applications. Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications – built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer or online at hannay.com.
All Hannay reels are constructed of quality heavy gauge steel (optional aluminum or stainless steel also available on most models).
Reel Product NewsPortable Reels for 1" Forestry and Standard Lay Flat HoseHannay Reels offers two lightweight and portable hose storage reels – ideal for Forestry lay flat or Standard lay flat hose – when extra lengths are needed in an emergency.
Model C16-10-11 • Small, lightweight, durable. • Adjustable cam-lock drag brake.• Permanent crank rewind. • For forestry lay flat hose, extension cord or rope.
Model C20-14-16 • Strong, portable. • Adjustable cam-lock drag brake.• Permanent crank rewind. • Optional pin lock available.• For forestry lay flat hose, standard lay flat hose, extension cord or rope. Model C20-14-16
shown with optional red finish
Model C16-10-11
shown with optional red finish
Parts Drawing – Model C16-10-11 – ISO 88; Model C20-14-16 – ISO 121