Knight Global (248) 377-4950 www.knightglobal.com "Due to continuous product development, Knight Global reserves the right to alter product specifications without prior notice." Hanger Type 1 Hanger Type 2 Hanger Type 3 Curved rail rod and ball I-beam hanger adjustable 5"-5 5/8": #MRHS44221 (4100 series rail) #MRHS49111 (7500 series rail) Fits 2"-7" flange #MRHS44241 (4100 series rail) #MRHS49131 (7500 series rail) Fits 7"-11" flange Curved rail rod and ball I-beam hanger is adjustable 15 7/16"-16 5/8": #MRHS44261 (4100 series rail) #MRHS49151 (7500 series rail) Fits 2"-7" flange #MRHS44281 (4100 series rail) #MRHS49171 (7500 series rail) Fits 7"-11" flange Top portion of this curved rail hanger pivots 360 degrees on the vertical axis to allow hanger to be attached to various angles of the header steel or truss. Curved rail rigid hanger #MRHS4440 NOTE: For curved rail sections, there should be a minimum of (2) hangers installed. Straight Rail Section Spacers Top View Spacers Slide Plate and Bolts Splice Block and Bolts Curved Rail Section General Installation: Curved Rail System