+44 (0) 1670 700 000 [email protected]WWW.HTLGROUP.COM g r o u p HTL would like to introduce the Hands Free Bolting’s revolutionary new Back-Up Nut. The Patented Back-Up Nut is designed to dramatically improve tool operator safety and assist in preventing injuries caused by dropped objects. This simple yet innovative patented design ensures any one of a wide range of bolting tools can be held in place during operation allowing the operator Hands Free Bolting whilst the tool is in use, dramatically reducing the risk of incident. The Back-Up Nut can be used with a wide variety of bolting tools including hydraulic torque wrenches, offset gear boxes and drives, spanners, back-up spanners and nut splitters. Available to fit a range of stud sizes between M12 and M76 as well as 1 / 2 ” to 2 3 / 4 ”. Features and Benefits Dramatically improves operator safety Eliminates dropped objects Supports the tool during the placing operation Cost effective safe solution Allows a hands free bolting operation Secures a wide variety of equipment Custom Branding available Hands Free Bolting Back-Up Nut Also available as a Boxed Set Back-Up Nut Safety Kit also available
2
Embed
Hands Free Bolting Back-Up g puo r Nut - HTL Australia
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
HTL would like to introduce the Hands Free Bolting’s revolutionary new Back-Up Nut.
The Patented Back-Up Nut is designed to dramatically improve tool operator safety and assist in preventing injuries caused by dropped objects. This simple yet innovative patented design ensures any one of a wide range of bolting tools can be held in place during operation allowing the operator Hands Free Bolting whilst the tool is in use, dramatically reducing the risk of incident.
The Back-Up Nut can be used with a wide variety of bolting tools including hydraulic torque wrenches, offset gear boxes and drives, spanners, back-up spanners and nut splitters.
Available to fit a range of stud sizes between M12 and M76 as well as 1/2” to 2 3/
4”.
Features and Benefits
Dramatically improves operator safety
Eliminates dropped objects
Supports the tool during the placing operation
Cost effective safe solution
Allows a hands free bolting operation
Secures a wide variety of equipment
Custom Branding available
Hands Free Bolting Back-Up Nut
Also available as a Boxed Set
Back-Up Nut Safety Kit also available
EXCELLENCE IN CONTROLLED BOLTING & FLUID POWER SOLUTIONS
HTL Group Ltd45 Colbourne Avenue,Nelson Park Industrial Estate,Cramlington, Northumberland,NE23 1WD
PLEASE NOTE: Figures provided are for guidance only, please refer to individual tool charts. All data is given in good faith and without acceptance of responsibility on the part of HTL.
group
BOLT SIZE
B
A
C
ASSEM NO. BOLT SIZE A (mm) B (mm) C (mm) WEIGHT (kg)
DO NOT SCALE. IF IN DOUBT, ASK. DIMENSIONS IN mm UNLESS STATED OTHERWISE.
MODEL:
1.6SURFACE FINISH UNLESS NOTED OTHERWISE
TREATMENT
SPEC1.00.50.110
100-OVEROVER
ANGULAR (DEGREES) 0.30.2HOLE CENTER TOL.
10100
GENERAL TOLERANCES UNLESS NOTED OTHERWISE
UP TO UP TO-
MATERIAL
REMOVE BURRS AND BREAK SHARP EDGES
THIS DRAWING IS THE PROPERTY OF HTL GROUP. COPYRIGHT IS RESERVED & THIS DRAWING IS ISSUED ON THE CONDITION THAT IT IS NOT COPIED, REPRODUCED, RETAINED OR DISCLOSED TO ANY UNAUTHORISED PERSON, EITHER WHOLLY OR IN PART, WITHOUT OUR CONSENT.
HTL-BNPART NO.
DRAWN BY
DD 1:1
1/1SIZE
A3
REV
SCALE
SHEET
CHECKED BY
DATE OF ISSUE
A01
BACK-UP NUT
25/10/16
SGQ
HTL GROUP
QA161 JAN16
BOLT SIZE
B
A
C
ASSEM NO. BOLT SIZE A (mm) B (mm) C (mm) WEIGHT (kg)
DO NOT SCALE. IF IN DOUBT, ASK. DIMENSIONS IN mm UNLESS STATED OTHERWISE.
MODEL:
1.6SURFACE FINISH UNLESS NOTED OTHERWISE
TREATMENT
SPEC1.00.50.110
100-OVEROVER
ANGULAR (DEGREES) 0.30.2HOLE CENTER TOL.
10100
GENERAL TOLERANCES UNLESS NOTED OTHERWISE
UP TO UP TO-
MATERIAL
REMOVE BURRS AND BREAK SHARP EDGES
THIS DRAWING IS THE PROPERTY OF HTL GROUP. COPYRIGHT IS RESERVED & THIS DRAWING IS ISSUED ON THE CONDITION THAT IT IS NOT COPIED, REPRODUCED, RETAINED OR DISCLOSED TO ANY UNAUTHORISED PERSON, EITHER WHOLLY OR IN PART, WITHOUT OUR CONSENT.
HTL-BNPART NO.
DRAWN BY
DD 1:1
1/1SIZE
A3
REV
SCALE
SHEET
CHECKED BY
DATE OF ISSUE
A01
BACK-UP NUT
25/10/16
SGQ
HTL GROUP
QA161 JAN16
Part No. Bolt Size A (mm) B (mm) C (mm) Weight (kg)