All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV HANDLEBARS & CONTROLS EXHAUST PLOWS & IMPLEMENTS WINCHES & MOUNTS AUDIO & VIDEO RACKS & ACCESSORIES TRUNKS, LUGGAGE & STORAGE BODY ARMOR HANDLEBARS & CONTROLS WHEEL ACCESSORIES BRAKES BELTS, CHAINS & SPROCKETS DRIVETRAIN SUSPENSION ENGINE FUEL/AIR SYSTEMS ELECTRICAL LIGHTING RIDER ACCESSORIES HARDWARE & MERCHANDISING GENERAL ACCESSORIES INDEX 233 EASY PULL CLUTCH SYSTEM •Constructed of high-strength polished cast aluminum •Inner linkage has three settings which increase the leverage ratio and ease the clutch pull •Fits most bikes, dependent on cable end and cable housing •Easy Pull’s cable end measures 9,6 mm tall and 7,9 mm in diameter •Easy Pull’s cable housing measures 8 mm in diameter •Verify full clutch disengagement before riding •For off-road use only •Replacement cable PART #M555-10-01 comes with two different length cables for all 2- and 4-stroke models FLY CLUTCH ASSEMBLY •E-Z adjust assembly lets you adjust cable slack on the fly •Assembly includes high-quality press-fitted bushing, CR-bend lever •Removable rubber boots keep mechanisms clean and operational •Nylon sleeve insert allows perch to rotate during impact •Perch assembly and replacement CR-bend lever available separately (listed below) MOOSE RACING BY ARC DC8 CLUTCH ASSEMBLIES •Say goodbye to lever play and vibration thanks to the ARC external lever pivot design •Oversized cast perch, forged flex lever, spiked rubber cable adjuster, and a nylon handlebar sleeve make up this precision control •ARC flex lever blade with reach adjust is hinged to move out of the way in most impact situations •Fits all 01-17 ATVs with cable-operated clutch •Available in black, blue or red with laser-etched Moose Racing by ARC logos •Replacement levers fit Moose Racing by ARC DC8 clutch assembly only •DC8 refresh kit PART #0615-0098 includes three rubber guards, lever pivot bolt, stainless steel wire and pivot bushings EZ-ADJUST CLUTCH PERCH AND LEVER •EZ-adjust mechanism requires no tools for on-the-fly adjustments •Two-piece design allows easy installation without removing grips •High-quality cast aluminum alloy construction •PTFE insert allows perch to rotate upon impact •For convenience, popular CR-ratio assembly sold separately, PART #M556-90-00 NOTE: Assembly consists of perch PART #M556-16 and lever PART #M553-10-16. ULTIMATE CLUTCH LEVER SYSTEM •Two cable locating positions for adjustable leverage and an easy pull •Needle bearings provide a smooth, consistent feel •Removable rubber guard keeps mechanisms clean and operational •Nylon insert allows perch to rotate during impact •Pivoting cable adjuster makes cable tension adjustments easy •Adjustable reach for personalized lever angle •Constructed of polished cast aluminum alloy DESCRIPTION PART # Easy-Pull clutch system M555-00 DESCRIPTION PART # Repl. cable M555-10-01 DESCRIPTION PART # Fly clutch perch M557-00 DESCRIPTION PART # Repl. lever w/ bushing M557-60-01 DESCRIPTION PART # MOOSE RACING BY ARC DC8 CLUTCH ASSEMBLY Black lever 0612-0250 Blue lever 0612-0251 Red lever 0612-0252 DESCRIPTION PART # MOOSE RACING BY ARC DC8 REPLACEMENT LEVERS Black 0613-0271 Blue 0613-0272 Red 0613-0273 DESCRIPTION PART # EZ-Adjust clutch perch and lever M556-90-00 DESCRIPTION PART # Repl. lever M553-10-16 Clutch perch w/ EZ-adjuster M556-16 PART # M557-00-01 PART # 0615-0098 DESCRIPTION PART # Ultimate Clutch System 0612-0006 Repl. perch 0615-0019 DESCRIPTION PART # Repl. standard lever 0613-0035 Repl. shorty lever 0613-0036 REFRESH KIT REPLACEMENT PARTS M556-16 M556-90-00 M557-00-01 0612-0250 0612-0252 0612-0251 0615-0098 0612-0006 M555-00
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
233
EASY PULL CLUTCH SYSTEM•Constructed of high-strength polished cast aluminum•Inner linkage has three settings which increase the leverage ratio and ease the clutch pull
•Fits most bikes, dependent on cable end and cable housing•Easy Pull’s cable end measures 9,6 mm tall and 7,9 mm in diameter•Easy Pull’s cable housing measures 8 mm in diameter•Verify full clutch disengagement before riding•For off-road use only•Replacement cable PART #M555-10-01 comes with two different length cables for all 2- and 4-stroke models
FLY CLUTCH ASSEMBLY•E-Z adjust assembly lets you adjust cable slack on the fly•Assembly includes high-quality press-fitted bushing, CR-bend lever•Removable rubber boots keep mechanisms clean and operational•Nylon sleeve insert allows perch to rotate during impact•Perch assembly and replacement CR-bend lever available separately (listed below)
MOOSE RACING BY ARC DC8 CLUTCH ASSEMBLIES•Say goodbye to lever play and vibration thanks to the ARC external lever pivot design•Oversized cast perch, forged flex lever, spiked rubber cable adjuster, and a nylon handlebar sleeve make up this precision control
•ARC flex lever blade with reach adjust is hinged to move out of the way in most impact situations•Fits all 01-17 ATVs with cable-operated clutch•Available in black, blue or red with laser-etched Moose Racing by ARC logos•Replacement levers fit Moose Racing by ARC DC8 clutch assembly only•DC8 refresh kit PART #0615-0098 includes three rubber guards, lever pivot bolt, stainless steel wire and pivot bushings
EZ-ADJUST CLUTCH PERCH AND LEVER•EZ-adjust mechanism requires no tools for on-the-fly adjustments•Two-piece design allows easy installation without removing grips•High-quality cast aluminum alloy construction•PTFE insert allows perch to rotate upon impact•For convenience, popular CR-ratio assembly sold separately, PART #M556-90-00
NOTE: Assembly consists of perch PART #M556-16 and lever PART #M553-10-16.
ULTIMATE CLUTCH LEVER SYSTEM•Two cable locating positions for adjustable leverage and an easy pull•Needle bearings provide a smooth, consistent feel•Removable rubber guard keeps mechanisms clean and operational•Nylon insert allows perch to rotate during impact•Pivoting cable adjuster makes cable tension adjustments easy•Adjustable reach for personalized lever angle•Constructed of polished cast aluminum alloy
DESCRIPTION PART #Easy-Pull clutch system M555-00
DESCRIPTION PART #Repl. cable M555-10-01
DESCRIPTION PART #Fly clutch perch M557-00
DESCRIPTION PART #Repl. lever w/ bushing M557-60-01
DESCRIPTION PART #MOOSE RACING BY ARC DC8 CLUTCH ASSEMBLYBlack lever 0612-0250Blue lever 0612-0251Red lever 0612-0252
DESCRIPTION PART #MOOSE RACING BY ARC DC8 REPLACEMENT LEVERSBlack 0613-0271Blue 0613-0272Red 0613-0273
DESCRIPTION PART #EZ-Adjust clutch perch and lever M556-90-00
DESCRIPTION PART #Repl. lever M553-10-16Clutch perch w/ EZ-adjuster M556-16
PART # M557-00-01
PART # 0615-0098
DESCRIPTION PART #Ultimate Clutch System 0612-0006Repl. perch 0615-0019
DESCRIPTION PART #Repl. standard lever 0613-0035Repl. shorty lever 0613-0036
REFRESH KIT
REPLACEMENT PARTS
M556-16
M556-90-00M557-00-01
0612-0250 0612-02520612-0251
0615-0098
0612-0006
M555-00
All part numbers in BOLD MAGENTA are new this year.2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
GENERAL ACCESSORIES
RACKS & ACCESSORIES
TRUNKS, LUGGAGE &
STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
INDEX
AUDIO & VIDEO
234
LEVER ASSEMBLIESFOR HONDA ATC
•Replacement alloy lever assemblies fit most Honda ATC models with single cable
•Includes 2-piece lever holder, cable adjuster and parking brake clip
RC8 CLUTCH ASSEMBLY•Highest-quality that can be produced in a standard-mount assembly•Utilizes the durability of the already famous ARC flex lever•Minimally-thin nylon sleeve for maximum lubricity•External pivot that eliminates up and down play•CNC-machined perch
MOOSE RACING BY ARC FLEX BRAKE LEVERS•Forged, anodized, and hinged brake levers with CNC-machined master cylinder interfaces•Adjustable reach allows customization to rider’s hand size•ARC hinge design allows lever to flex out of the way in most impact situations•Pushrod or ball bearing contact styles for positive brake modulation•Available in black with laser-etched Moose Racing by ARC logos
DC8 COMPOSITE LEVER CLUTCH ASSEMBLY
•Virtually indestructible Memlon™ composite lever formulated to be strong, yet can bend and be straightened repeatedly without breaking
•Legendary ARC folding adjustable lever design with external pivot that eliminates almost all up and down play
•Aluminum die-cast perch is CNC-machined for accuracy•1/3-turn quick-adjust wheel
VERTICAL HOT START LEVERS/ CLAMPS
•Clutch-side slipper hot start levers/ clamps•Billet aluminum clamp and nylon sleeve to allow for rotation on impact
•Cable adapters and A-bolts are supplied•Matching slipper clamp for the back of the brake master cylinder also available (also includes high-strength A-bolts)
•Fit 00-17 models
6 MM PERCH SPACER•Moves lever 6 mm away from handlebar grip•Offers better control and fit for riders with larger glove sizes•Machined Delrin® allows perch to rotate and decreases chances of breakage•Installs easily using existing perch and included bolts
DESCRIPTION PART #Right assembly 20338
DESCRIPTION PART #Left assembly 20337
DESCRIPTION PART #RC8 clutch perch 0612‑0253Repl. forged ARC flex lever (black) 0613‑0279Refresh kit (rubbers, pivot bolt, wire, bushings) 0615‑0101
FITS MODEL PART #HONDATRX450R 04-09, 13-14 0614‑0714TRX700 08-09 0614‑0714KAWASAKIKFX400 03-06 0614‑0711KFX450 08-10, 13-14 0614‑0711
FITS MODEL PART #SUZUKILTZ250 04-09 0614‑0710LTZ400 03-14 0614‑0710LTZ450 06-09 0614‑0710YAMAHABlaster 03-06 0614‑0713
FITS MODEL PART #YAMAHA (CONT)Banshee 95-06 0614‑0713Raptor 250 08-14 0614‑0712YFZ450 07-09 0614‑0712YFZ450R/X 09-14 0614‑0712Raptor 660 01-05 0614‑0713
FITS MODEL PART #YAMAHA (CONT)Raptor 700 06 0614‑0713Raptor 700 07-14 0614‑0712
PART # 0612‑0370
DESCRIPTION PART #Clutch-side 0615‑0104Matching slipper clamp for brake master cylinder 0615‑0106
DESCRIPTION PART #6 mm perch spacer (single) 0615‑0202
DESCRIPTION PART #6 mm perch spacer (pair) 0615‑0203
0615‑0104 0615‑0106
0614‑0710
20337
0615‑0202
0615‑0202
0612‑0253
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
235
DUAL GASSER THROTTLES•Billet aluminum construction is strong and lightweight•Anodized in four different colors•Eliminate thumb fatigue•Combine the features of a thumb throttle and a twist throttle•Convenient twist locks out so that the grip is solid when using the thumb lever•Will not fit any throttle with electrical sensors
EASY-PULL THUMB THROTTLES•Billet aluminum construction is strong and lightweight•Anodized in four different colors•Compact throttle has a better pull ratio than stock throttles•Works only on stock Honda TRX450R and Yamaha YFZ450 models
SHOKOUT ATV GRIP SYSTEMS•Include mounting hardware for the factory 4WD engagement button•Lets the Shokout Grip System handle the impact, not riders’ wrists and arms•Unique ergo design for superior thumb lever contact and improved lever reach for reduced thumb fatigue and cramping
•Enhanced internal mechanics for improved throttle feel and control•Reduce arm pump and dampen vibration to decrease micro-trauma and strains to the wrist•Riders can customize the action to suit their style of riding•Included choice of dampers: soft, medium or firm; mix/ match dampers to vary forward/ rearward rotation•Use new Scott Hurricane grips PART # 0630-0353
YFM660R Raptor 01-05 0630-0349YFM700R Raptor 06-08 0630-03491 Only models w/o 4x4 switch.2 TORS switch must be disconnected.3 4WD push-button switch.
SHOKOUT ATV REPL. GRIPS (PR.)
0632-0250 0632-02520632-0251 0632-0253
0632-0254 0632-02560632-0255 0632-0257
All part numbers in BOLD MAGENTA are new this year.2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
GENERAL ACCESSORIES
RACKS & ACCESSORIES
TRUNKS, LUGGAGE &
STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
INDEX
AUDIO & VIDEO
236
THUMBUDDY™ THROTTLE EXTENDER•Quickly and easily attaches to any ATV thumb throttle•Stainless steel core can be bent to perfectly mold to the rider’s hand•Ergonomic rubber coating relieves thumb fatigue
THROTTLE COVERS•Replace the OEM throttle cover with a CNC-machined billet aluminum cover
•Machined, recessed Moose Racing Icon logo
THUMB THROTTLES•Machined from solid billet aluminum•Interchangeable with most stock thumb throttle cables•Designed to easily open 44 mm carburetors•Will not fit any throttle with electrical sensors•Four different colors available
GOLDFINGER LEFT SIDE THROTTLE KIT•Cable adapter and fasteners constructed of highest-quality stainless steel•Gold anodized aluminum throttle lever can be operated with one finger for safer sidehilling
•Includes rubber accordion boot and throttle locking pin (locks left throttle from unwanted use)
•Kit includes all hardware, Allen wrenches and instructions for installation
THUMB ASSIST•Bolt-on thumb throttle extender attaches to all models of ATVs
•Made from stainless steel with a soft rubber coating, the extender helps to relieve hand fatigue and is adjustable to fit all sizes of hands for a more comfortable ride
PART # 0632-0134
FITS MODEL COLOR PART #HONDATRX250EX 01-09 Red 0632-0009
Polished 0632-0010TRX300EX 93-09 Red 0632-0009
Polished 0632-0010TRX400EX 99-09 Red 0632-0009
Polished 0632-0010
FITS MODEL COLOR PART #HONDA (CONT)TRX450R 06-09 Red 0632-0237KAWASAKIKFX400 04-06 Polished 0632-0238
Black 0632-0239
FITS MODEL COLOR PART #SUZUKILT-Z400 04-08 Polished 0632-0238
FITS MODEL PART #SUZUKIOzark, Vinson, King Quad 250/ 400/ 450/ 500/ 750 05-16 (will not fit Quad Master, Quad Racer. Quad Sport of 50cc/ 80cc/ 90cc models) 0632-0258
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
237
CABLES FOR TURBO THROTTLE OR GUNNAR GASSER•Fit the models listed
TURBO THROTTLE AND KITS•Polished die-cast aluminum housing•Open 28-38 mm carburetors•Perfect ratio for offroad motorcycles or ATVs•Come complete with cable adjuster and dust boot•11,5 mm (41/2”) handgrip; same cable applications as the “Gasser/ Whirlpull” type throttle•Available separately or in a kit with throttle cable in a display pack with applications
REAR BRAKE CABLE KITSFOR YAMAHA
BLASTER 88-02•Kits eliminate stock cable from handlebar
•Cable runs from rear brake caliper to rear brake pedal•Choose from stock or +10 cm (+4”) over brake cable lengths
REPLACEMENT THROTTLE CABLESFOR MOTION PRO TWIST THROTTLE KITS
•Replacement throttle cables for Motion Pro ATV twist throttle kits
PART # BA-01057
HIGH-TEMPERATURE SLEEVING KITS
•Protect against abrasion and resist oil, gasoline and most chemicals•Heat range of -40 °C to 93+ °C (-40 °F to 200+ °F)•UV light resistant•Easy to cut with scissors and easy to clean with soap and water•Kits include 305 cm (10’) of 6,4 mm (1/4”) sleeving, 305 cm (10’) of 9,5 mm (3/8”) sleeving, 152 cm (5’) of 12,7 mm (1/2”) sleeving and heat-shrink termination tubing
•Available in black, red or blue
FITS MODEL PART #Most ATVs w/ Mikuni, Bing or Keihin 36-38 mm carb. 117 cm (46”) cable w/ adjustable 98 cm (38,7”) housing BA-01216Honda ATC 90/ 110/ 185/ 200, TRX200 84; Kawasaki KLT110/ 200. 124 cm (485/8”) cable w/ adjustable 103 cm (405/8”) housing BA-01201Most ATVs w/ 30-34 mm Mikuni round slide, 34-38 mm Mikuni flat slide and Keihin PJ 34-38 mm carbs; also Suzuki LT230S 85-88, LT 250S 89-90 and LT250R 85-92 BA-01227Most ATVs w/ Mikuni round slide, flat slide or Keihin carb. 129,5 cm (51”) cable w/ adjustable 112 cm (44,2”) housing BA-01249
YFM400FW 93-98 BA01-368YFM400 Big Bear 00-12 BA01335YFM400 Kodiak 4x4 Auto 00-06 0632-01083, 4
YFM450 Kodiak 03-06 0632-01083
YFM450 Grizzly 07-13 0632-01083
YFM450FX Wolverine 06-10 0632-01084
1 Top cable section only.2 Must use with idle kit PART #BA-08045.3 Requires switch mount kit PART #0616-0003.4 Requires switch mount kit Motion Pro
PART #11-0026.5 Requires switch mount kit Motion Pro
PART #11-0032.
DESCRIPTION PART #Rear brake kit, stock brake cable MP010298Rear brake kit, +10 cm (+4”) over brake cable MP01-0299
FITS THROTTLE KIT # PART #0632-0005 0650-06720632-0006 0650-06740632-0065 0650-02800632-0184 0650-0675
FITS THROTTLE KIT # PART #0632-0719 0650-1673BA01-0510 BA01-0721BA01-0511 BA01-0722BA01-0512 BA01-0723
FITS THROTTLE KIT # PART #BA01-0513 BA01-0724BA01-0520 BA01-0738BA01-0571 0650-0673BA01304 BA-01201
FITS THROTTLE KIT # PART #BA01319 BA01-250BA01-322 BA01-239BA01328 BA01-220BA01330 BA01-247
FITS THROTTLE KIT # PART #BA-01339 BA-01255BA01345 BA01-260BA01-368 BA01-390BA01-502 BA01-707
DESCRIPTION PART #(A) Black 2120-0080
DESCRIPTION PART #(B) Red 2120-0081
DESCRIPTION PART #(C) Blue 2120-0082
TURBO THROTTLE ONLY
THROTTLE KIT APPLICATIONS
C
A
B
All part numbers in BOLD MAGENTA are new this year.2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
GENERAL ACCESSORIES
RACKS & ACCESSORIES
TRUNKS, LUGGAGE &
STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
INDEX
AUDIO & VIDEO
238
VORTEX THROTTLE KITS•Fastest twist rate Motion Pro throttle•Made from die-cast aluminum with a gray finish and gray rubber mud cover•Design is similar to most late-model Japanese MX bikes•Available as throttle only or in a kit with the appropriate cable
CR PRO THROTTLES AND KITS•Throttle features die-cast aluminum housing with black epoxy finish; chrome CR Pro throttle also available separately•Straight-pull assembly•Recommended for 34 mm or smaller straight-pull carburetors•11,5 mm (41/2”) throttle sleeve with grip retaining ring and pop-out end cap
YFM700R Raptor 06‑16 0632-0184YFM700 Grizzly 16 0632-0781YFM700 Grizzly EPS 4WD 16 0632-0781YFM700 Kodiak EPS 4WD 16 0632-0781YFM700 Kodiak EPS 4WD SE 16 0632-07811 Must use idle kit PART #BA‑08045.2 Must use switch plate PART #0616‑0003.3 4x4/ 6x6 models must use switch elimination coupler
PART #0616‑0006.4 For 335 Sportsman 00 with vehicle designations of
A00CH33AC/AD/AE/AF/AG use 4x4 relocation switch kit PART #0616‑0006.
5 Also fits PJ34‑36/ PWK 28‑35 Keihins and Mikuni TM 28‑34.6 Includes CR Competition Throttle.
All part numbers in BOLD MAGENTA are new this year.2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
GENERAL ACCESSORIES
RACKS & ACCESSORIES
TRUNKS, LUGGAGE &
STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
INDEX
AUDIO & VIDEO
240
STRAIGHT PULL TWIST THROTTLE•Universal for all 22 mm (7/8”) handlebars•11,5 cm (41/2”) sleeve length to fit all popular dirt grips•Universal throttle cable included•Inner cable approximately 112 cm L (44”)•Replacement cable PART #110049
SWITCH MOUNT KITS•Allow you to relocate the switch on 4x4 models when installing a twist throttle kit
•Use with Motion Pro twist throttle kits•Include mounting rings, mounting screws and setscrews
THROTTLE OVERRIDE ELIMINATOR KITS AND IDLE KITSTHROTTLE OVERRIDE ELIMINATOR KITS
•Eliminate TORS and stock carb cap; must use idle kit PART #BA-08045 (order separately)•For use with stock thumb throttle•Kit includes a throttle cable and carb cap or caps
IDLE KIT•Install a standard Mikuni idle adjuster into the carburetor body•Use on Yamaha Banshee and Blaster models•Necessary if carburetor top has been replaced with a standard Mikuni cap•Kit includes a drill bit, thread tap, two idle screws with lock nuts and instructions
TWIST THROTTLE•Will replace original thumb throttles•Universal bolt-on twist throttle with 11,5 cm (41/2”) grip length
•Fits all 22 mm bars (7/8”)•Does not include cable
Z05 NIPPLE ASSORTMENT•Assorted selection of 100 various screw nipples, solder nipples and nipple barrels in a plastic box
FITS MODEL PART #POLARIS 4WD SWITCH RELOCATOR (CONT)Xpedition 325 00 0616‑0006Xpedition 325 01 0616‑0006Sportsman 600/ 700 Twin 02-05 0616‑0006
FITS MODEL PART #YAMAHA SWITCH MOUNTYFM450 Kodiak 03-05 0616‑0003
FITS MODEL DESCRIPTION PART #YAMAHAYFS200 Blaster Throttle override eliminator 0632‑0494
Idle kit BA‑08045Repl. cable for PART #0632-0494 0650‑1047
FITS MODEL DESCRIPTION PART #YAMAHA (CONT)YFZ350 Banshee 87-06 Throttle override eliminator 0632‑0080 (for stock, Keihin PWK 28 mm Idle kit BA‑08045 and Mikuni TM 28 mm carbs) Repl. cable for PART #0632-0080 0650‑0671
PART # 065000
PART # 0612‑0245
0616‑00030616‑0006
0632‑0080
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
241
ALUMINUM REPLACEMENT LEVERS•Ergonomic design with anti-friction bronze bushing eases clutch pull and reduces arm pump•Cast aluminum alloy construction means levers can be bent back to original shape•Brake and clutch levers sold separately
COMPETITION LEVER SETS•Ergonomic design with anti-friction bronze bushing eases clutch pull and reduces arm pump•Vulcanized silicone rubber grip pattern prevents fingers from slipping off control levers•High-quality polished cast aluminum construction•Sold in pairs
FITS MODEL COLOR PART #HONDATRX400EX 99-07 Black M558-15-20YAMAHAYFS200 Blaster 90-93/96-02 Blue M558-41-20YFS200 Blaster 03-06 Blue M558-43-30
FITS MODEL COLOR PART #YAMAHA (CONT)YFZ350 Banshee 02-05 Blue M558-43-30YFM350X Warrior 02-08 Blue M558-43-30YFM350F Wolverine 03-07 Blue M558-43-30YFM660 Raptor 01-05 Blue M558-43-30
BlackBlue
All part numbers in BOLD MAGENTA are new this year.2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
GENERAL ACCESSORIES
RACKS & ACCESSORIES
TRUNKS, LUGGAGE &
STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
INDEX
AUDIO & VIDEO
242
“SHORTYS” POWER LEVER SET•Alloy “Shortys” allow two-finger control of the brake and clutch•Set includes brake and clutch short power levers•Each lever set is skin-packed and labeled for easy identification•Levers only; perch not included
“CARBON FIBER LOOK” LEVERS•Quality alloy “carbon fiber look” levers•Get the “carbon fiber look” without the expensive price tag•Each lever is individually poly bagged with header card and labeled for easy identification
REPLACEMENT LEVERS•Quality alloy replacement levers are available in standard lever style•Each replacement lever is labeled for easy identification•Sold each
FITS MODEL FINISH BRAKE TYPE PART #HONDAATC200X 83-87 Black Disc 44‑2106
06-14 (all) 44‑419 ‑1 For “power lever” style, order PART #44-402.2 “Power lever” style.
LEVER APPLICATIONS
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
243
CLUTCH CABLES•Equipped with pre-lubricated nylon inner sleeves and tightly coiled inner casings•Flexible PVC outer jacket and strong steel inner cable offers high durability and smooth control to ensure carefree driving•Easy to assemble to each cable’s appropriate length with all necessary mounting parts
CONTROL CABLES•OEM-style cables are available in a wide variety of applications for most popular models•Cables have nylon-lined housings and use precise OEM component dimensions•Terminator clutch cables are available for several models; wires in the outer casing are wound lengthwise instead of around the cable to eliminate compression and spongy clutch feel
FITS MODEL PART #CAN‑AMDS450 08-15 0652‑2228
FITS MODEL PART #YAMAHAYFM250R Raptor 08-13 0652‑2196
FITS MODEL PART #YAMAHA (CONT)YFM350 Warrior 87-04 0652‑2163
FITS MODEL PART #YAMAHA (CONT)YFZ350 Banshee 87-09 0652‑2239
FITS MODEL DESCRIPTION PART #ARCTIC CATDVX 400 04, 06-08 Throttle 0650‑0133
Rincon 06-09 Throttle MP02-375KAWASAKIKFX80 03-06 Front brake 0653-0038
Throttle MP04-111KLT110A 85-86 Front brake MP03-097KLT160A 85 Front brake MP03-097KLF185A 85-86 Rear hand brake 0653-0011KLF185A 87-88 Rear hand brake 0653-0011
KVF700B Realtree Hard 04-05 Foot brake 0653-0030Rear hand brake 0653-0032
KVF700D Prairie 4x4 Team Foot brake 0653-0030 Green Special Edition 04-05 Rear hand brake 0653-0032
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
245
CONTROL CABLES continued on next page.
CONTROL CABLES (CONT)
FITS MODEL DESCRIPTION PART #KAWASAKI (CONT)KVF700D Prairie 4x4 Team
Green Special Edition 05 Throttle 0650-0267KVF750 Brute Force 05-07 Foot brake 0653-0045KVF750A/B Brute Force 4x4 Throttle 0650-0542 Hardwoods Green 05-07 Rear hand brake 0653-0036KVF750C Brute Force 4x4i Throttle 0650-0542 Silver 06-07 Rear hand brake 0653-0036KVF750D/E Brute Force 4x4i/
Hardwoods Green 08-10 Rear hand brake 0653-0036KVF750F Brute Force
4x4i 08, 10-11 Rear hand brake 0653-0036KVF750G/H/J Brute Force
750 4x4i EPS 12-16 Rear hand brake 0653-0036KVF750L Brute Force
All part numbers in BOLD MAGENTA are new this year. 2017 PARTS EUROPE ATV/UTV
HANDLEBARS & CONTROLSEXHAUST
PLOWS & IMPLEMENTS
WINCHES & MOUNTS
AUDIO & VIDEO
RACKS & ACCESSORIES
TRUNKS, LUGGAGE & STORAGE
BODY
ARMOR
HANDLEBARS & CONTROLS
WHEEL ACCESSORIES
BRAKES
BELTS, CHAINS & SPROCKETS
DRIVETRAIN
SUSPENSION
ENGINE
FUEL/AIR SYSTEMS
ELECTRICAL
LIGHTING
RIDER ACCESSORIES
HARDWARE & MERCHANDISING
GENERAL ACCESSORIES
INDEX
249
CONTROL CABLES•Clutch and throttle cable assemblies•Black PVC outer jacket for maximum flexibility and durability
•Steel inner casing is tightly coiled for low compression ratios
•A pre-lubricated nylon inner sleeve guarantees smooth operation and long life
•All wire ends are bird-caged prior to terminal casting for superior pull-out resistance•EPDM molded rubber components for high UV resistance and long life•Injected-molded components are manufactured from high-strength POM material