HAND TOOLS 44 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED Vaughn Hammers Claw Hammer with Fiberglass Handle #S16F, 16 oz. $23.10 / Ea Rip Hammers with Fiberglass Handle #S16FR, 16 oz. $23.40 / Ea Tubular-Handled Rip Hammers #S16TR, 16 oz. $18.45 / Ea Brick Hammers #BL16, 16 oz. $23.70 / Ea #BL24, 24 oz. $25.10 / Ea Carbide-Blade Brick Hammers #BL24TC, 24 oz. $29.85 / Ea Carpenter's Half Hatchet #SH2, 22 oz. $27.90 / Ea Original Super-Bar 15" 4-use Prybar #B215 $13.95 / Ea Ames/True Temper Sledge Hammers • Designed to be used in heavy hammer applications for striking wood, concrete, metal, and stone • Common uses are drifting heavy timbers and striking spikes, cold chisels, rock drills and hardened nails #1196900, 4# $18.75 / Ea #1197400, 6# $28.50 / Ea #1197900, 8# $31.70 / Ea #1199100, 10# $36.50 / Ea #1199400, 12# $42.15 / Ea #1199700, 16# $60.60 / Ea Tampers • Invaluable tools for site preparation work, tampers are used to pack and level soil • Heavy cast metal bases with reinforced corners and a painted aluminum finish • Ash handles are tapered for comfort during use #1133400, 8" x 8" $38.65 / Ea #1133700, 10" x 10" $45.70 / Ea #2014100 Tamper Handle $12.60 / Ea Wrecking Bars • Slight offset chisel end opposite a gooseneck bend with a nail pulling slot • Produced from hexagon stock, each product features properly shaped and ground chisels and sharp, clean nail slots #1170500, 3/4" x 24" $10.65 / Ea #1171000, 3/4" x 30" $13.00 / Ea Make-Your-Own Tool Box Kits JHK-1: Jr, 1 hinge, 13"long • Measures 4" high, 5" wide, and 13-12" long • Included for each toolbox: 1 steel hinge (13-1/4") plain, 1 nickel-plated steel handle, zinc plated catch strike, 4 corners $6.15 / Ea MHK-1: Large, 2 hinges, 18" long • Measures 7" high, 6" wide, and 18" long • Included for each toolbox: 2 steel hinges (17-3/4") plain, 1 heavy duty plastic handle, 1 padlock hasp & staple, 2 plated drawbolts, 4 corners $7.50 / Ea WHK-1: Large, one hinge, 18" long • Measures 7" high 6" wide, and 18" long • Included for each toolbox: 1 steel hinge (17-3/4") plain, 1 heavy duty plastic handle, 1 chrome plated drawbolt, 4 corners $6.25 / Ea For Sheet Metal To Build Tool Boxes From Kits, See Page 7. Tool Box Hardware Steel Continuous Hinge (.025" thick) 13-1/4" $.90 / Ea 17-3/4" $1.15 / Ea Handles Black Plastic $1.40 / Ea Steel Plated $1.55 / Ea Chrome Plated Steel Corner $.35 / Ea Chrome Plated Steel Drawbolt & Catch $1.70 / Ea Zinc Plated Steel Catch & Strike $2.20 / Ea Padlock Hasp & Staple $.75 / Ea
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
HAND TOOLS
44 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
Vaughn Hammers
Claw Hammer with Fiberglass Handle
#S16F, 16 oz. $23.10 / Ea
Rip Hammers with Fiberglass Handle
#S16FR, 16 oz. $23.40 / Ea
Tubular-Handled Rip Hammers
#S16TR, 16 oz. $18.45 / Ea
Brick Hammers
#BL16, 16 oz. $23.70 / Ea#BL24, 24 oz. $25.10 / Ea
Carbide-Blade Brick Hammers#BL24TC, 24 oz. $29.85 / Ea
Carpenter's Half Hatchet
#SH2, 22 oz. $27.90 / Ea
Original Super-Bar 15" 4-use Prybar
#B215 $13.95 / Ea
Ames/True Temper
Sledge Hammers• Designed to be used in heavy hammer
applications for striking wood, concrete,metal, and stone
• Common uses are drifting heavy timbersand striking spikes, cold chisels, rockdrills and hardened nails
Crescent Black Finish AdjustableWrench• Polished head; regular handle; Non-
slip grip• Wide capacity jaw allows each tool to
work with more fastener sizes• Corrosion resistant black finish
#AT16V, 6" long $16.45 / Ea#AT18V, 8" long $17.10 / Ea#AT110V, 10" long $21.50 / Ea#AT112V, 12" long $33.20 / Ea
Crescent End Cutting Nippers• Width of blades, clearance in throat,
leverage ratio of handles to blades,size of rivet and angle of cutting edgeshave been carefullydesigned toproduce a top quality tool
#727CV, 7-1/4" long $23.05 / Ea
Crescent Tongue And Groove Pliers• Designed to grip all shapes like rods,
pipes and cable connections• Straight jaws and self-locking jaw
adjustment• Forged, hardened and tempered
#R210CV, 10" long $13.05 / Ea#R212CV, 12" long $15.20 / Ea
Wiss Snips
Wiss Compound Action Metal Snips• Non-slip serrated jaws made of extra
tough and wear-resistant specialmolybdenum steel to provide theextra service demanded by thecompound lever action and towithstand the severe strain of cuttingheavy stock or tight curves
• Handles are formed of specialhigh strength steel and have amargin of strength far above the limitof the hand power that can be exerted
Safety Razor Scraper• Durable all steel construction• Strong welded body• Accepts most all single edge razor
blades• Use for removing gum, adhesive, caulk,
window labels and stickers
#105 $1.85 / Ea#103, with 5 blades $2.40 / Ea
HAND TOOLS
48 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
Jorgensen Clamps
Adjustable Jaw Length Handscrews• For gluing and assembly of woodwork,
furniture, cabinet work, etc.• Hard maple jaws do not mar the work
and are less likely to slip than steel jaws• They have deep throat and afford either
a broad area of evenly distributed pres-sure, or concentration at one point
• Angle between jaws adjustable to fitthe work-also jaws may be adjustedone to overlap the other
#3/0, 6" jaw length$16.70/Ea
Pony Steel Bar Clamp Fixtures• No holes, notches or rivets required to
assemble; just screw the head onregular pipe threads
• The foot has a multiple disc clutch whichgrips the bar automatically at any point
• Most rapid action, secure holding powerand easy release
#52, for 1/2" black pipe $12.45 / Ea#50, for 3/4" black pipe $16.25 / Ea
Pony Spring Clamps• Light, inexpensive tools of countless
uses on metal, wood, plastics, fabric-ready, willing "extra hands" for usewherever "spring pressure" isadequate, and especially where speedis essential
• At full nominal opening capacity thejaws do not go "beyond" parallel;handles do not tend to slip out of thehands
52 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
Irwin
Metal Case Chalk ReelHeavy-duty case is constructed of durablealuminum alloy. Steel plated hook andlarge grip ancor ring provide betterholding power. Retractable self-lockingmetal handle allows reel to be used as aplumb bob. Twisted cotton line holdsmore chalk for multiple line strikes. Holdsapproximately 2 oz. of chalk.
#64110, 100 ft. $5.80 / Ea
Fast Retrieve Chalk ReelRetrieves chalk lin 3-1/2 times faster thana standard chalk reel. Crank handleclutch release allows release of the linewithout spinning the crank handle.Lightweight ABS impact-resistant caseincreases durability. Patented hookstorage and door locking mechanismvirtually eliminate spills and line tangles.Twisted cotton line holds more chalk formultiple line strikes. Holds approximately2 oz. of chalk.
High Speed Steel Drill Bits3/64" High Speed Drill Bit $.75 / Ea1/16" High Speed Drill Bit $.75 / Ea5/64" High Speed Drill Bit $.75 / Ea3/32" High Speed Drill Bit $.90 / Ea7/64" High Speed Drill Bit $.90 / Ea1/8" High Speed Drill Bit $.90 / Ea9/64" High Speed Drill Bit $1.00 / Ea5/32" High Speed Drill Bit $1.00 / Ea11/64" High Speed Drill Bit $1.15 / Ea3/16" High Speed Drill Bit $1.30 / Ea13/64" High Speed Drill Bit $1.50 / Ea7/32" High Speed Drill Bit $1.60 / Ea15/64" High Speed Drill Bit $1.70 / Ea1/4" High Speed Drill Bit $1.90 / Ea17/64" High Speed Drill Bit $2.25 / Ea9/32" High Speed Drill Bit $2.65 / Ea19/64" High Speed Drill Bit $2.85 / Ea5/16" High Speed Drill Bit $2.90 / Ea21/64" High Speed Drill Bit $3.20 / Ea11/32" High Speed Drill Bit $3.60 / Ea23/64" High Speed Drill Bit $4.05 / Ea3/8" High Speed Drill Bit $4.10 / Ea
Cobalt Jobbers Length Drill Bits• Designed for drilling stainless steel and
other hard abrasive materials• Easily withstands high drilling heat• 135° split point starts cutting
Marathon Miter/Table Saw Blades• 400 grit diamond ground teeth for a
smooth finish• Precision tensioned and balanced
blade for an accurate cut• Construction grade carbide teeth for
longer life• Thin kerf for fast cuts
Part # Dia. Teeth Arbor Kerf14070 10 40 5/8" .095"$30.60 / Ea14084 12 100 1" .095"$77.90 / Ea
Marathon Portable Corded Circular SawBlades• Every other tooth is thinner for faster
cuts• New heat vent/expansion slot design
reduces vibration for longer life andstraighter cuts
• Construction grade carbide teeth forlonger life
• Reinforced shoulder for addeddurability
• Fully hardened plate runs truer, longer• All have 5/8" diamond arbot and 20
degree hook angle
Part # Dia. Teeth Kerf24030 7-1/4 24 .071" $12.60 / Ea
Saw Blades
Lenox Reciprocating Saw Blades• For smooth cutting wood, nails, metal,
cast iron and ceramics• Makes contour cutting easy• Bi-metal and high carbon steel blade
for long and rugged use• Fits all reciprocating saws
6" x 6 tpi $4.00 / Ea6" x 10 tpi $3.45 / Ea6" x 14 tpi $3.45 / Ea6" x 18 tpi $3.45 / Ea6" x 24 tpi $3.45 / Ea
8" x 10 tpi $4.35 / Ea8" x 18 tpi $4.35 / Ea
12" x 6 tpi $6.25 / Ea
Lenox Jig Saw Blades• Available in bi-metal and high-speed
steel• Broad selection of sizes and shapes for
cutting any material that can be saw cut• Use more tpi for thin work, use less tpi
for thicker work• At least two teeth should be in contact
with the work material• 2 per package
3" x 14 tpi $3.55 / Pkg3" x 18 tpi $3.55 / Pkg3" x 24 tpi $3.55 / Pkg
4" x 6 tpi $4.15 / Pkg4" x 10 tpi $4.15 / Pkg
4-1/2" x 6 tpi $3.90 / Pkg4-1/2" x 10 tpi $4.75 / Pkg
HAND TOOLS
56 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
Brushes
Vortec Small Angle Grinder BrushesSmall angle grinder brushing applica-tions include roughening,deburring, rustand paint removal, weld scale and spatterremoval, and surface preparation beforepainting and welding. All have 5/8-11arbor size.
#36030, 3" crimped cup brush-coarse$10.30 / Ea
#36038, 2-3/4" knot cup brush-extracoarse $15.80 / Ea
#36012, 4" wheel brush/twist-coarse$17.15 / Ea
#36053, M10 x 1.50 Adapter $4.10 / Ea
Vortec Large Angle Grinder BrushesHeavy-duty roughening, deburring,weld scale and corrosion removal, surfacepreparation before painting or welding.All have 5/8-11 arbor size.
#36036, 4" crimped cup brush-coarse$20.20 / Ea
#36018, 4" knot cup brush-extra coarse$14.20 / Ea
Vortec Bench Grinder BrushesPopular applications include heavy-duty burr and flash removal, cleaning,edge blending and surface conditioning.All have 5/8" to 1/2" arbor size.
Drywall Circle Cutter• Hardened cutter wheel and center pin
will remain sharp indefinately• Cuts sharp clean circles of up to 16" in
diameter with only one hand• Measure accurately on the calibrated
steel shaft
#14556, 8-1/2" $8.10 / Ea
Professional Drywall T-Square• Anodized aluminum finish• Large, bold numbers and graduations• Patented rivet design; permanently
fixed joint of blade and head• Specifically designed for the drywall
professional
#413-48 $14.60 / Ea
Hawk• Structural foam• Holds drywall mud and cement• For trowel or tape knife use
#HWK $7.75 / Ea
Wallboard Saws• 6" saw blade; hardwood handle
#WL6C $3.25 / Ea
HAND TOOLS
59ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
180 Series Putty Knives• Rugged, hard-working line for light-
duty construction or home projects• Economical tools feature blades of
spring stainless steel for easyspreading and easy cleanup
• Handles are polypropylene to resistpaint thinners and adhesive solventsduring cleanup
#184, 4-1/2" Broad Knife,Stainless Steel, Flex
$2.45 / Ea
#186, 6" Broad Knife,Stainless Steel, Flex
$2.95 / Ea
McGuire-Nicholas Workwear
Economy Foam Rubber Knee Pad• Contoured foam rubber• One 3/4" wide adjustable web strap• Overall size: 6.75 x 10 x 2.5
#317 $10.40 / Pr
Polyshield Knee Pads• Fully stitched cap keeps out debris• High density foam for maximum comfort• Two 1-1/2" velcro straps• Overall size: 7.75 x 12 x 4
#343 $12.00 / Pr
Non-Marring Knee Pads• Won't mar, scratch or scuff floors• Slip resistant ridges on cap• Two 1-1/2" adjustable velcro straps• Overall size: 7.75 x 12 x 4
#353 $15.20 / Pr
Suspenders• Redistributes weight of tools• Heavy-duty 2" wide suspenders• Fully adjustable front straps• One size fits all
#110C, Red $8.25 / Ea
2" Web Belts• Adjustable to fit waists up to 46"
#506 $5.50 / EaPolyweb, 2.5 x 11.5 x 1
1-3/4" Wide Leather Belt• Heavy-duty, rust resistant plated buckle• Cuts off to fit waists from 29"-46"• Overall size: 2.5 x 12 x 2
#416X $11.60 / Ea
45 Degree Large Cordless Drill Holster• Fits medium to large size cordless drills• Large opening for quick left handed
access• Center balance design; 2-1/2" belt slots• Overall size: 7.5 x 13.5 x 3
#1720R $10.55 / Ea
Hammer Holder• Rust resistant, plated steel loop• 2-3/4" belt slots• Overall size: 4.25 x 6.5 x 2
#439 $3.20 / Ea
2-Pocket Canvas Waist Apron• 2 large flared pockets; waist ties• Reinforced at stress points• Overall size: 17.75 x 8.75
#C17 $2.15 / Ea
5-Pocket Canvas Waist Apron• 2 large flared pockets; 3 small pockets• 2 webbed hammer loops; waist ties• Overall size: 20.5 x 9
#C14 $5.50 / Ea
5-Pocket Nail & Tool Bag• Large main compartment• Front nail pocket• 3 small tool pockets• Left leather hammer holder• Overall size: 10.5 x 13 x 2
#423RSP $16.70 / Ea
HAND TOOLS
60 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED
Quality Import Tools
Diagonal Cutting Pliers• Heavier design for all-
purpose use• Tapered nose and
standard bevelcutting edges
• Drop forged chromealloy steel
• Precision ground andhardened with insulated cushion grips
4-1/2" Diagonal Cutting $4.85 / Ea6-1/2" Diagonal Cutting $5.45 / Ea7" Heavy Duty Diagonal $6.80 / Ea
Long Nose Pliers• High-leverage
design with groundcutting edges atjoint
• Permits wrapping,looping and cuttingwith a single plier
• Drop forged chrome alloy steel• Precision ground and hardened with
insulated cushion grips
5" Long Nose $4.05 / Ea6 1/2" Long Nose $5.15 / Ea8" Long Nose $6.55 / Ea
Linesman Pliers• High-leverage
design for easiercutting
• Provides greatermechanical cuttingand grippingadvantage than otherpliers of this type
• Coarsely knurled jaws• Drop forged chrome alloy steel• Precision ground and hardened with
3/8" x 5" Cold Chisel $2.70/Ea1/2" x 6" Cold Chisel $3.10/Ea5/8" x 6" Cold Chisel $4.10/Ea3/4" x 7" Cold Chisel $5.80/Ea7/8" x 8" Cold Chisel $6.10/Ea
1/8" to 1 1/8" Tubing Cutter $6.30 / Ea
6’ Wooden Folding Ruler-Brass Extent$6.10 / Ea
Hammers
8 oz. Economy Curved Claw $6.45/Ea16 oz. Economy Curved Claw $7.20/Ea16 oz. Deluxe Curved Claw $9.75/Ea16 oz. Ripping Claw Hammer $7.70/Ea16 oz. Fiberglass Claw $11.65/Ea24 oz. Framing Hammer $14.95/Ea
Ball Pein Hammers
8 oz. Ball Pein $6.70 / Ea12 oz. Ball Pein $7.65 / Ea16 oz. Ball Pein $9.45 / Ea24 oz. Ball Pein $10.40 / Ea32 oz. Ball Pein $12.35 / Ea
1-1/2# Half Hatchet-14" long $23.95/Ea2-1/4# House-19" long $14.85/Ea2-1/4# Standard-28" long $29.95/Ea3-1/2# Single Bit-36" long $29.95/Ea3-1/2# Double Bit-36" long $32.85/Ea
Gooseneck Crow Bar
1/2" x 12" Gooseneck $3.90 / Ea5/8" x 18" Gooseneck $6.60 / Ea3/4" x 24" Gooseneck $10.65 / Ea3/4" x 30" Gooseneck $13.00 / Ea3/4" x 36" Gooseneck $15.25 / Ea
HAND TOOLS
62 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED