HAMPTON collection
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
HAMPTONcollection
QUALITY
ECO T ILE
WHITE
ZNXMC1R
RECTIFIED
30x6012x24’’
2
ZRXMC1R
RECTIFIED
60x6024x24’’
3
ALL SIZES ARE NOMINAL
SIZES
30x60.12x24” RECTIFIED
60x60.24x24” RECTIFIED
30x30.12x12” RECTIFIED
10x30.04x12” RECTIFIED10x30.04x12” SKIRTING
MQCXMC1MOSAIC WHITE
30x3012x12’’
ZCXMC1R
RECTIFIED
30x3012x12’’
ZDXMC1R
RECTIFIED
10x304x12’’
MQCXMC81MOSAIC MIX
30x3012x12’’
QUALITY
ECO T ILE
GREY
ZNXMC8R
RECTIFIED
30x6012x24’’
6
ZRXMC8RRECTIFIED
60x6024x24’’
7
ZCXMC8RRECTIFIED
30x3012x12’’
MQCXMC8MOSAIC GREY
30x3012x12’’
ALL SIZES ARE NOMINAL
SIZES
30x60.12x24” RECTIFIED
60x60.24x24” RECTIFIED
30x30.12x12” RECTIFIED
10x30.04x12” RECTIFIED10x30.04x12” SKIRTING
ZDXMC8RRECTIFIED
10x304x12’’
MQCXMC81MOSAIC MIX
30x3012x12’’
QUALITY
ECO T ILE
10
TECHNICAL FEATURES
TECHNICAL FEATURESTANDARD METHOD
REQUIREMENTSZEUS
VALUES
CALIBER RANGE - RectifiedASTM C499
± 0.25% or 0.03 in (0.8 mm)1 ± 0.20%
THICKNESS2 Range: ± 0.04 inch (1.02 mm) COMPLIANT
WEDGING - Rectified ASTM C502 ± 0.25% or 0.03 in (0.8 mm)1 ± 0.15%
WARPAGE EDGE - Rectified ASTM C485 ± 0.40% or 0.05 in (1.3 mm)3 or 1.8 mm4 ±0.25%
BREAKING STRENGTH ASTM C648 Average ≥ 250 lbf. (1.11 kN)/ Individual ≥ 225 lbf. (1.00 kN) COMPLIANT
1 Whichever is less. 2 May not apply to textured surfaces or tiles with uneven back patterns. 3 Whichever is less, for tiles up to 24” x 24” (610 mm x 610 mm) 4 Applies to tiles larger than 24” x 24” (610 mm x 610 mm) 5 Glazed tile only. 6 When installation subject to freeze/thaw conditions. 7 For Level interior spaces expected to be walked upon when wet (see Section 6.2.2.1.10)
TECHNICAL FEATURES
TECHNICAL FEATURESTANDARD METHOD
REQUIREMENTSZEUS
VALUES
WATER ABSORPTION ASTM C373 ≤ 0.50% COMPLIANT
THERMAL SHOCK5 ASTM C484 PASS PASS
RESISTANCE TO FREEZE/TAW CYCLING6 ASTM C1026 AS REPORTED NO DAMAGE
VISIBLE ABRASION RESISTANCE5
ASTM C1027-99 AS REPORTED IV – V
CHEMICAL RESISTANCE ASTM C650 AS REPORTED NOT AFFECTED
STAIN RESISTANCE ASTM C1378 CTI81-7D AS REPORTED NOT AFFECTED
DINAMIC COEFFICIENT OF FRICTION section 9.6 0.427
Dry Wet
0.72* 0.61*
* Product tested in Zeus Laboratory on February 14th, 2014 by the Boot3000 device with DCOF setting. Item: ZNXMC8 sh. 560.
11
ALL SIZES ARE NOMINAL
SIZES
30x60.12x24” RECTIFIED
60x60.24x24” RECTIFIED
30x30.12x12” RECTIFIED
10x30.04x12” RECTIFIED10x30.04x12” SKIRTING
V2 - MODERATE
SHADEVARIATION
DEGREE OF COLOUR CHANGE / Degree of variation in the shade and/or in the colour between the various parts of the laid product: minimum V1, maximum V4.
V1 - LOW
The least amount of shade and texture variation.
V2 - MODERATE
Light to moderate shade and texture variation within each carton
V3 - HIGH
High shade texture variation wrthin each carton.
V4- RANDOM
Very high shade and texture variation within each carton.
SHADE SYSTEM
PACKAGING DATA
FORMAT THICKNESSPCS IN
bOXWEIGHT IN bOX
SQ.M. IN bOX
bOXES ON THE PALLET
SQ.M. IN THE PALLET
UNIT cm mm pcs kg m2 pcs m2
30x6012x24”
9,5 7 26,5 1,26 40 50,40
60x6024x24”
10 3 26,7 1.08 40 43.2
30x3012x12”
9,5 13 23,7 1,17 40 46.8
10x304x12”
9,5 28 17.01 0,84 88 73,92
MOSAIC12x12”
9,5 6 7,5 0,54 60 32,4
12
INSTALLATION SUGGESTIONS
Hampton Collection
60x60 (24x24”) 57,1%30x60 (12x24”) 28,6%30x30 (12x12”) 14,3%
30x60 (12x24”) 66,7%30x30 (12x12”) 33,3%
60x60 (24x24”) 77,8%30x30 (12x12”) 22,2%
30x60 (12x24”) 86,4%10x30 (04x12”) 13,6%
30x60 (12x24”) 100%
13
HAMPTON - ANTIbACTERIAL PORCELAIN TILE
Our newest product possessing unique consumer properties and high antibacterial activity.
The antibacterial property of the HAMPTON product is based upon the application of silver nano particles (3-10 nm) during the manufacturing process.
The product possesses a wide ranging antimicrobial effect. It resists bacteria as well as fungus, mold and viruses.
The product is completely non-toxic, has no odor and is long lasting.
Silver particles have the size of 3-10 nm, they have great surface area and this is the reason of high activity of the product.
The SILMAKS silver particles are injected into the glaze during the manufacturing process in a 1%-2% concentration. Additional SILMAKS applications can be done prior to firing of the tile.
The SILMAKS silver particles prevent the formation of microorganisims, bacteria and mold on the surface of the tile.
As the silver particles are part of the tile glaze they never wear.
The use of the SILMAKS silver particles has no effect on the appearance or other technical characteristics of the tile.
Product applications include:
- Medical Centers- Food Industries- Laboratories- All domestic and residential applications
West Service Center145 West Santa Ana Street
Anaheim, CA 92805tel. 714.774.3645 fax. 714.774.5683
Southeast Service Center3905 Center Loop, Suite 100
Orlando, FL 32808tel. 407.253.1350 fax. 407.253.1353
North American Headquarters22701 Dulles Summit Court
Dulles, VA 20166tel. 703.481.1150 fax. 703.481.1160
Related Documents
