2 Hänge- und Laufkrane Suspension and Overhead Travelling Cranes Ponts roulants suspendus et posés
2
Hänge- und LaufkraneSuspension and Overhead Travelling CranesPonts roulants suspendus et posés
KR02
_12.
FM
2/2 09.02
Das Kapitel "Hänge- und Lauf-krane" gibt Ihnen einen Überblick über das Normkranprogramm von R. STAHL.
Die Auswahl der Hubwerke, Hub-geschwindigkeiten, Hubhöhen, Fahrgeschwindigkeiten, Einstu-fungen wurde aus dem Schwer-punkt der Kundenwünsche getroffen. Mit diesen Angaben sind Sie in der Lage, alle wichtigen Einbau-maße und Belastungsangaben zu ermitteln.
Unser modular aufgebautes Kranprogramm läßt aber auch eine Vielzahl von Optionen und Abwandlungen zu. Wenden Sie sich in diesen Fällen an eine der weiter hinten genannten Anschriften. Von dort erhalten Sie umgehend Antwort.
Für weitergehende Informatio-nen und Beratungen stehen Ihnen unsere Fachberater - ganz in Ihrer Nähe - zu Verfügung.
This chapter "Suspension and overhead travelling cranes" provides a summary of R. STAHL's standard crane programme.
The hoists, hoisting speeds, heights of lift, travelling speeds and classifications were selected taking into account the majority requirements of our customers. This information will permit you to determine all major installation dimensions and load details.
However, our modular crane programme permits a wide range of options and variations. For such requirements, please approach one of the addresses given towards the rear of the handbook. You will receive a reply by return.
Our experts in your area will be pleased to offer you further information and consultation.
Le chapitre "Ponts roulants suspendus et posés" vous donne un résumé du programme standardisé des ponts roulants de R. STAHL.
Les exigences des clients ont conditionné la sélection des palans, des vitesses de levage, des hauteurs de levée, des vitesses de marche, et des classifications. Ces renseignements vous permettent de déterminer toutes cotes d'installation importantes et données des charges.
En outre, notre programme modulaire de ponts roulants rend possible une multiplicité d'options et de variantes. En cas de besoin, adressez-vous à l'une des adresses vers la fin du manuel; vous recevrez une réponse rapidement.
Nos experts sont disponibles pour des informations complémentaires ou consultations.
Erklärung der Symbole Explanations of Symbols Explication de symboles
Tragfähigkeit Lifting capacity Capacité de charge
Hubwerk Hoist Palan
Katzfahren Cross travel Direction
Kranfahren Long travel Translation
Hs Horizontalkraft aus Schräglauf Horizontal force from skewing Force horizontale due au biaisement
Hm Horizontalkraft aus Massen-kräften
Horizontal force from inertia forces
Force horizontale due à la masse
Pu Pufferendkraft Max. force Forces finales
HW Hakenweg Hook path Hauteur de levée
V Hubgeschwindigkeiten Hoisting speeds Vitesses de levage
↑ Siehe Seite .. See page .. Voir page ..
Radlast Wheel load Réaction au galet
max. Radlast Max. wheel load Réaction maximale au galet
min. Radlast Min. wheel load Réaction minimale au galet
Die Radlasten wurden mit dem schwersten Hebezeug jeder Traglaststufe und dem maxima-len Spurmittenmaß der ent-sprechenden Trägergröße ermittelt. Projektbezogen müs-sen diese Werte jedoch opti-miert werden.
The wheel loads were calcula-ted on the basis of the heaviest hoist for each range of capacity and the maximum span for the corresponding beam size. However these values must be optimised for each project.
Les réactions ont été calculées sur la base du palan plus lourd de la gamme de capacité et de la portée maximale pour la taille de poutre correspondante. Cependant, ces valeurs doivent être optimisées pour le projet individuel.
↑R max.
R min.
↑
KR02
_12.
FM
09.02 2/3
2
Inhaltsverzeichnis Table of Contents Indice
Einträgerhängekrane
Die Technik im Überblick ......... 2/4
EH-.. ............................................ 2/6
Laufkrane
Die Technik im Überblick ....... 2/10
Einträgerlaufkrane
EL-A .. ........................................ 2/12
EL-B .. ........................................ 2/18
EL-C .. ........................................ 2/24
Zweiträgerlaufkrane
ZL-A .. ....................................... 2/28
Planung und Angebot ........... 2/33
Einträgerhängekrane ............ 2/34
Laufkrane.................................. 2/35
Single girder suspension cranes
Technical features at a glance...2/4
EH-.. .............................................2/6
Overhead travelling cranes
Technical features at a glance..2/10
Single girder overheadtravelling cranes
EL-A ...........................................2/12
EL-B ...........................................2/18
EL-C .. ........................................ 2/24
Double girder overheadtravelling cranes
ZL-A .. ........................................ 2/28
Planning and quotation ........2/33
Suspension cranes ................2/34
Overhead travelling cranes ...2/35
Ponts roulants suspendus monopoutre
La technique en un coup dœil ....2/4
EH-.. .............................................2/6
Ponts roulants posés
La technique en un coup dœil ..2/10
Ponts roulants posésmonopoutre
EL-A .. .........................................2/12
EL-B .. .........................................2/18
EL-C .. ........................................2/24
Ponts roulants posés bipoutre
ZL-A .. ........................................2/28
Projet et offre ........................2/33
Ponts roulants suspendus ....2/34
Ponts roulants posés...............2/35
Technische Änderungen, Irrtum und Druckfehler vorbehalten.
Subject to alterations, errors excepted.
Sous réserve de modifications et erreurs.
KR02
_22.
FM
Einträgerhängekrane EHSingle Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
2/4 09.02
Die Technik im Überblick Technical Features at a Glance La technique en un coup d’œil
Diese Produktinformation enthält Einträgerhängekrane (EH- ..) in der Normausführung.Darüber hinaus gibt es noch wei-tere vorbereitete Optionen, die schnell und preisgünstig lieferbar sind, wie zum Beispiel:
• Andere Hub- und Fahrge-schwindigkeiten
• Überlastabschaltung• Betriebshubendschalter• Katzfahrendschalter/Kran-
fahrendschalter• Krandistanzierung• Temperaturüberwachung aller
Motore• Funkfernsteuerung• Stufenlose STAHLTRONIC-
Frequenzsteuerung• Sicherheitsfahrschaltung
gegen Hindernisse
Moderne Fertigungsverfahren und unser zertifiziertes Qualitäts-sicherungssystem nach DIN ISO 9001/ EN 29001 garantieren eine gleichbleibend hohe Qualität der Krane von R. STAHL.
Kranbrücke Die Kranbrücke ist aus Walzprofil oder aus einem geschweißten Kastenprofil in Abhängigkeit von der Tragfähigkeit und dem Spur-mittenmaß des Krans.
Einstufungnach DIN 15018, H2/B3, andere Einstufungen auf Anfrage.
HubwerkeWahlweise und je nach Tragfä-higkeit werden Qualitäts- Ketten-züge oder Seilzüge von R. STAHL eingesetzt. Diese haben generell:• Zwei Hubgeschwindigkeiten.• Zwei Katzfahrgeschwindig-
keiten 5/20 m/min.
This Product Information comprises single-girder suspension cranes (EH-..) of standard design.In addition, there are further options available which can be supplied quickly and economically, e.g.:
• Other hoisting and travel speeds
• Overload cut-off• Operational hoist limit switch• Cross travel/long travel limit-
switches• Crane spacing• Temperature monitoring on all
motors• Radio remote control• STAHLTRONIC frequency
convertor for variable transportation of loads
• Obstructions automatically avoided
Modern manufacturing procedures and our certified quality assurance system to DIN ISO 9001/EN 29001 guarantee consistently high quality for R. STAHL cranes.
Crane bridgeDepending on the lifting capacity and the span of the crane, the crane bridge is a rolled section or a welded box section.
Classificationto DIN 15018, H2/B3, other classifications on request.
HoistsAccording to requirements and lifting capacity, quality R. STAHL chain or wire rope hoists are used. As standard, these have:• Two hoisting speeds• Two cross travelling speeds
5/20 m/min.
Ces Renseignements sur le Produit contiennent les ponts roulants suspendus monopoutre (EH-..) dans l'exécution standard. En outre, d'autres options sont disponibles rapidement et à prix avantageux, p.ex.:
• Autres vitesses de levage, de direction, de translation
• Mise hors circuit en cas de surcharge
• Fin de course de levage de service
• Fins de course de direction/translation
• Dispositif anticollision• Protection des moteurs contre
l'échauffement par sondes thermiques
• Télécommande radio• Convertisseur de fréquence
STAHLTRONIC pour le transport de charges sans à-coups
• Dispositif de contournement automatique des obstacles
Nos techniques de production modernes et notre système d'ass-urance qualité selon les normes DIN ISO 9001/EN 29001 garantis-sent une qualité constante des ponts roulants de R. STAHL.
Poutre porteuseSelon la capacité de charge et la portée du pont, la poutre porteuse est un profil laminé ou un profil soudé en caisson.
Classificationselon DIN 15018, H2/B3, autres classifications possibles sur demande.
PalansAu choix et selon la capacité de charge, un palan à chaîne ou un palan à câble de haute qualité de R. STAHL est employé. Les ver-sions standard de nos palans sont:• Deux vitesses de levage• Deux vitesses de direction
5/20 m/min.
KR02
_22.
FMEinträgerhängekrane EH
Single Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
09.02 2/5
2
Die Technik im Überblick Technical Features at a Glance La technique en un coup d’œil
Kopfträger Stahlkonstruktion mit hoher geometrischer Genauigkeit.• Laufräder aus Kugelgraphitguss.
Die hervorragenden Selbst-schmiereigenschaften des Laufradwerkstoffs GGG 70 sor-gen für eine hohe Lebensdauer des Rad-/Laufbahn-Systems.
• Geringe Kranbahnträgerbe-lastung. Geringe Unterflansch-biegung durch ein optimiertes Laufradprofil ermöglicht den Einsatz kleinerer Kranbahn-träger.
• Hochfeste Schraubverbindung zwischen Kranbrücke und Kopfträgern.
Fahrantrieb • Robuster Laufradantrieb mit
gekapselter und fettge-schmierter Laufradverzahnung.
• Besonders komfortables Anfahr- und Bremsverhalten für minimales Lastpendeln.
• Sehr geräuscharm durch Schrägverzahnung aller Getrie-bestufen.
• Zwei Fahrgeschwindigkeiten 10/40 m/min, andere Geschwin-digkeiten auf Anfrage.
SteuerungSchützsteuerung, Steuerspan-nung 230 oder 42 V.• Bedienungsfreundliches
Steuergerät; entlang der Kran-brücke unabhängig vom Hub-werk verfahrbar.
Korrosionsschutz• Stahlkiesentrostung Grad 2,5
nach DIN 18364.• Zinkphosphat-Grundierung,
Trockenschichtdicke ca. 60 µm, Farbton oxidgelb.
Zulässige Umgebungstemperatur-20°C...+40°C.
EndcarriagesSteel structure with a high degree of geometrical accuracy.• Wheels of spheroidal graphite
cast iron. The excellent self-lubricating prosperties of the wheel material GGG 70 ensure a long service life of the wheel/runway system
• Minimum load on crane runway beam. Only slight deflection of the bottom flange thanks to an optimized wheel profile, enabling the use of smaller crane runway beams
• High-tensile bolt connection between crane girder and end carriage.
Travel drive • Robust wheel drive with
enclosed, grease-lubricated wheel gearing
• Particularly smooth acceleration and braking characteristics for minimum swinging of load
• Very little noise due to helical gearing of all gear steps.
• Two travelling speeds 10/40 m/min, other speeds on request.
ControlsContactor control, control voltage 230 or 42 V.• Easy-to-operate control
pendant; can be moved along the crane bridge independent of the hoist.
Corrosion protection• Steel shot de-rusting grade
2.5 to DIN 18364• Zinc phosphate primer, dry film
thickness approx. 60 µm, colour yellow oxide.
Permissible ambient temperature-20°C...+40°C .
Sommier Construction d'acier avec une grande précision géométrique.• Galets en fonte à graphite
sphéroïdal. Les excellentes propriétés autolubifiantes de la matière des galets GGG 70 garantissent une grande longévité du système galet/chemin de roulement
• Réaction minimale sur la poutre du chemin de roulement. La courbure minimale de la semelle inférieure obtenue par un profil de galet spécial, permet l'utilisation de poutres plus petites pour le chemin de roulement.
• Fixation de la poutre porteuse au sommier par boulons à haute résistance
Groupe d'entraînement • Entraînement direct des galets
avec denture des galets protégée par cache et lubrifiée à la graisse
• Freinage et roulement doux pour minimaliser l'oscillation de la charge.
• Trés silencieux grâce à la denture hélicoïdale à tous les étages.
• Deux vitesses de translation 10/40 m/min, les autres vitesses sont disponibles sur demande.
CommandeCommande par contacteurs Très basse Tension 230 ou 42 V.• Boîte de commande agréable
à manier; déplaçable le long de la poutre porteuse indépendamment du palan.
Protection contre la corrosion• Sablage SA 2,5 selon DIN 18364• Couche primaire de phosphate
de zinc, épaisseur de la couche sèche env. 60 µm, couleur jaune oxyde.
Température ambiante admissible-20°C...+40°C .
KR02
_22.
FM
Einträgerhängekrane EHSingle Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
2/6 09.02
Die Technik im Überblick ↑ 2/4. Technical features at a glance ↑ 2/4. La technique en un coup d’œil ↑ 2/4.
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
D D 2 D 5 D 8 D 9 D 10 D 11 D 12 D 13 D 20
K 1 K 2
b 1 b 2 R max R min Hs Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]500 1,2/0,3 0,05/0,2 2x0,05/0,2 ...8,0 1000 1430 380 - 250 250 140 150 K 1=
519b 1= 377
2,6 1,0 0,5 3,0...11,9 ...14,0
1800 2230 380 420
- -
3,0 3,5
1,5 2,0
0,6 0,7
3,34,7
HW = 3,0 m V = 12/3 m/min
ST 1005-12/3 1/1 1Am
...14,3
...15,5
...16,5
...17,4
2500 2930 440 460 480500
----
3,6 4,0 4,34,6
2,1 2,5 2,9 3,1
0,7 0,8 0,90,9
5,26,37,48,4
2x0,06/0,32 ...17,9 520 - 4,8 3,4 1,0 9,2...20,0 550 35 5,0 3,5 1,0 9,7
1000 1,2/0,3 0,05/0,2 2x0,05/0,2 ...8,0 1000 1430 380 - 250 250 140 150 K 1= 519
b 1= 437
4,0 1,0 0,8 3,0
HW = 3,0 m V = 6/1,5 m/min
ST 1005-12/3 2/1 1Am
...10,0
...12,3
...13,6
...14,0
1800 2230 380 420 440 460
- - - -
4,24,75,05,2
1,31,82,12,3
0,8 0,9 1,0 1,0
3,0 4,3 5,46,1
...14,7 2500 2930 480 - 5,5 2,6 1,1 6,82x0,06/0,32 ...15,7
...16,6
...17,9
500520560
---
5,86,06,5
2,93,23,7
1,21,21,3
7,8 8,7
10,5...20,0 550 35 6,4 3,5 1,3 9,9
Ausführung "B"*1 Lampen, Rohre u.ä.*2 DB Lademaß*3 Stromzuführung*4 verfahrbares Steuergerät
Design "B"*1 Lamps, pipes or similar*2 Railway loading gauge*3 Power supply*4 Mobile control pendant
Exécution "B"*1 Lampes, tuyaux, etc.*2 Gabarit d’encombrement du SNCF*3 Gaine d’alimentation électrique*4 Boîte de commande mobile
KR02
_22.
FMEinträgerhängekrane EH
Single Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
09.02 2/7
2
1000
HW = 12,0 mV = 12,5/2 m/minSH 3005-25 2/1 L2
3m
2,4/0,4 0,09/0,37 2x0,05/0,2 ...8,0 1000 1430 380 - 470 620 140 150 K2=328
b2=540
4,3 1,4 0,8 3,9...9,4...11,8...13,0
1800 2230 380420440
---
4,55,05,4
1,62,02,3
0,91,01,1
5,76,67,9
2x0,06/0,32 ...14,0 460 - 5,7 2,6 1,1 9,1...14,1...15,1...16.1...17,8
2500 2930 480500520560
----
5,96,16,47,0
2,83,03,33,9
1,21,21,31,4
9,811,011,913,7
...18,0
...20,0470550
3035
7,46,8
4,83,6
1,51,4
15,012,9
1600
HW = 3,0 mV = 8/2 m/min
ST 3016-8/2 1/11 Bm
2,3/0,57 0,05/0,2 2x0,05/0,2 ...8,0 1000 1430 380 - 280 280 140 150 K1=589
b1=507
5,7 0,9 1,1 3,0...8,4...10,7
1800 2230 380420
--
5,86,2
1,11,5
1,21,2
3,04,1
2x0,06/0,32 ...12,0...13,1...14,0
440460480
---
6,66,97,1
1,92,22,5
1,31,41,4
5,16,06,8
...15,0
...16,72500 2930 520
560--
7,58,1
2,93,4
1,51,6
8,210,1
...17,9
...19,3470550
3035
8,68,0
4,03,4
1,71,6
12,19,9
4x0,05/0,2 ...20,0 550 45 8,7 4,1 1,7 12,5
1600
HW = 12,0 mV = 10/1,6 m/minSH 3008-20 2/1 L2
2m
3,0/0,5 0,09/0,37 2x0,05/0,2 ...8,0 1000 1430 380 - 470 620 140 150 K2=328
b2=540
5,7 1,5 1,1 3,9...8,2 1800 2230 380 - 5,8 1,6 1,1 5,3
2x0,06/0,32 ...10,5...11,7...12,8...13,7...14,0
420440460480500
-----
6,36,66,97,27,4
1,92,22,52,82,9
1,31,31,41,41,5
6,07,38,59,5
10,2...14,7...16,5
2500 2930 520560
--
7,78,2
3,23,7
1,51,6
11,213,0
4x0,05/0,2 ...18,0 470 30 8,9 4,3 1,8 15,02x0,06/0,32 ...19,0 550 35 8,1 3,5 1,6 12,54x0,05/0,2 ...20,0 550 45 8,8 4,3 1,8 14,8
2000
HW = 3,0 mV = 6/1,5 m/minST 2010-12/3 1/1
1 Am
2,3/0,57 0,05/0,2 2x0,05/0,2 ...7,0 1000 1430 380 - -
280 280 140 150 K 1= 589
b 1= 545
6,7 0,8 1,3 3,0...7,9 380 6,7 0,9 1,3 3,0...8,0 420 6,9 1,1 1,4 3,1
2x0,06/0,32 ...10,1...11,4...12,4...13,4...14,0
1800 2230 420 440 460 480500
- - - -
7,27,57,88,08,3
1,41,82,12,42,6
1,41,51,61,61,7
3,94,95,76,67,3
...14,3
...16,12500 2930 520
560- -
8,49,0
2,83,3
1,71,8
7,99,8
4x0,05/0,2 ...17,9 ...18,5 ...20,0
470 550 550
30 35 45
9,68,99,7
4,03,24,1
1,91,81,9
12,19,5
12,5
2000
HW = 6,0 mV = 6,3/1 m/min
SH 3005-25 4/1 L23m
2,4/0,4 0,09/0,37 2x0,06/0,32 ...7,7...8,0
1000 1430 380420
--
530 570 140 150 K2=328
b2=480
6,66,8
1,51,7
1,31,4
4,85,6
...9,8...11,0...12,1...13,0...14,0
1800 2230 420440460480500
-----
7,17,57,88,18,3
1,92,22,42,72,9
1,41,51,61,61,7
6,07,08,19,1
10,24x0,05/0,2 ...15,7 2500 2930 560 - 9,1 3,6 1,8 12,6
...17,8
...18,0
...20,0
470470550
307045
9,810,39,8
4,34,84,3
2,02,12,0
14,816,914,8
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
D D 2 D 5 D 8 D 9 D 10 D 11 D 12 D 13 D 20
K 1 K 2
b 1 b 2 R max R min Hs Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Ausführung "B"
Maßskizzen ↑ 2/6.
Design "B"
Dimensional sketches ↑ 2/6.
Exécution "B"
Croquis dimensionaux ↑ 2/6.
KR02
_22.
FM
Einträgerhängekrane EHSingle Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
2/8 09.02
2500
HW = 3,0 mV = 8/2 m/min
ST 5025-8/2 1/11 Am
3,8/0,9 0,05/0,2 2x0,06/0,32 ...7,1...8,0
1000 1430 380420
--
310 520 140 150 K1=711
b1=641
7,98,0
0,91,1
1,61,6
3,03,0
...9,2...10,4...11,5...12,4...13,3...14,0
1800 2230 420440460480500540
------
8,28,58,79,09,29,6
1,31,61,92,22,42,8
1,61,71,71,81,81,9
3,44,25,05,86,67,7
...15,1 2500 2990 585 - 165 160 10,1 3,3 2,0 9,4
...17,2
...17,9
...19,2
495495575
55520
10,711,210,8
4,04,54,1
2,12,22,2
11,913,712,2
4x0,05/0,2 ...20,0 575 20 11,7 5,0 2,3 15,6
3200
HW = 3,0 mV = 4/1 m/min
ST 3016-8/2 2/11 Bm
2,3/0,57 0,05/0,2 2x0,06/0,32 ...6,2...8,0
1000 1430 380420
--
310 310 140 150 K1=602
b1=586
9,810,0
0,61,0
2,02,0
3,03,1
...8,4
...9,5...10,5...11,4...12,3...14,0
1800 2290 420440460480500540
------
165 160 12,210,510,811,011,211,7
1,31,61,92,12,42,9
2,12,12,22,22,22,3
3,84,65,46,16,98,5
4x0,05/0,2 ...16,1...17,7...18,0...19,5
2500 2990 495495575575
5552020
12,513,112,613,6
3,84,43,84,8
2,52,62,52,7
11,513,911,815,6
4x0,06/0,32 ...20,0 615 80 14,1 5,4 2,8 17,8
3200
HW = 6,0 mV = 5/0,8 m/min
SH 3008-20 4/1 L22m
3,0/0,5 0,09/0,37 2x0,06/0,32 ...6,3 ...8,0
1000 1430 380 420
- -
530 570 140 150 K2= 328
b2= 480
9,4 9,9
1,8 2,0
1,9 2,0
5,8 6,1
...8,2 1800 2230 420 - 10,0 2,0 2,0 6,5
...9,3 ...10,2 ...11,1...12,0
2290 465 485 505 525
----
165 160 10,5 10,8 11,111,4
2,4 2,6 2,8 3,0
2,1 2,2 2,2 2,3
8,2 9,1
10,111,0
4x0,05/0,2 ...13,6 565 - 11,9 3,4 2,4 12,6...14,0 475 25 12,2 3,7 2,4 13,7...15,7 ...17,8
2500 2990 495 495
5 55
12,8 13,5
4,2 4,9
2,5 2,7
15,2 18,2
4x0,06/0,32 ...18,0 595 5 13,8 5,2 2,8 19,4...19,0 ...20,0
575 615
20 80
555 13,8 14,5
5,1 5,8
2,8 2,9
19,4 22,2
4000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,09/0,37 2x0,06/0,32 ...4,7...7,7...8,7...9,7...10,5
1800 2290 380420440460480
-----
370 370 165 160 K1=666
b1=707
11,912,212,412,712,9
0,71,21,51,82,0
2,42,42,52,52,6
3,03,64,45,15,8
4x0,05/0,2 ...11,4...13,0
500540
--
13,113,5
2,32,8
2,62,7
6,58,0
...14,0 450 50 14,0 3,2 2,8 9,6
...15,0
...16,42500 2990 495
4955
5514,314,9
3,64,2
2,93,0
10,813,0
4x0,06/0,32 ...17,0...17,9...18,3
495595595
555
20
15,015,515,3
4,34,74,6
3,03,13,1
13,515,214,7
2x0,15/0,63 ...20,0 3130 637 58 230 170 16,5 5,8 3,3 12,9
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
D D 2 D 5 D 8 D 9 D 10 D 11 D 12 D 13 D 20
K 1 K 2
b 1 b 2 R max R min Hs Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Ausführung "B"
Maßskizzen ↑ 2/6.
Design "B"
Dimensional sketches ↑ 2/6.
Exécution "B"
Croquis dimensionaux ↑ 2/6.
KR02
_22.
FMEinträgerhängekrane EH
Single Girder Suspension Cranes EHPonts roulants suspendus monopoutre EH
09.02 2/9
2
4000
HW = 6,0 mV = 6,3/1 m/minSH 4010-25 4/1
2m
4,8/0,7 0,09/0,37 2x0,06/0,32 ...7,4...8,5
1800 2290 445 465
--
570 600 165 160 K 2= 343
b 2= 490
12,1 12,4
2,4 2,6
2,4 2,5
7,7 8,8
4x0,05/0,2 ...9,4...10,2...11,1...12,7
485 505 525 565
- - --
12,7 13,0 13,3 13,8
2,7 2,9 3,0 3,4
2,5 2,6 2,7 2,8
9,710,6 11,4 12,9
...14,0 475 25 14,4 3,9 2,9 14,5
...14,6 2500 2990 495 5 14,7 4,1 2,9 15,44x0,06/0,32 ...16,6
...16,9495 595
555
15,4 15,8
4,8 5,1
3,1 3,1
18,2 19,5
2x0,15/0,63 ...18,0 3130 617 637
-17 230 170 16,4 5,7 3,3 15,6...20,0 58 610 17,1 6,2 3,4 17,6
5000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,09/0,37 4x0,05/0,2 ...4,8...7,2...8,9...9,6...10,5
1800 2290 445465485505525
-----
370 370 165 160 K1=666
b1=707
14,614,815,115,315,5
0,71,31,61,82,1
2,93,03,03,13,1
3,03,94,85,46,1
2x0,15/0,63 ...12,0 2500 3130 607 - 230 170 16,5 3,1 3,3 5,7...14,0...15,9...17,7...20,0
517517617637
-1733-1758
17,117,718,319,0
3,74,45,15,8
3,43,53,73,8
7,29,0
10,812,9
5000
HW = 6,0 m V = 5/0,8 m/min
SH 4012-20 4/1 L2 2m
4,8/0,7 0,09/0,37 4x0,05/0,2 ...6,4 ...8,6 ...9,3
1800 2290 465 485 505
- - -
570 600 165 160 K 2= 343
b 2= 490
14,5 15,3 15,5
3,0 3,0 3,1
2,9 3,1 3,1
9,7 11,2 11,8
4x0,06/0,32 ...10,1 525 - 15,8 3,2 3,2 12,52x0,15/0,63 ...11,6 2500 3130 607 - 230 170 16,9 4,1 3,4 10,6
...13,5
...15,0
...15,4
...17,1
517 517 517 617
-17 33 33 -17
17,6 18,3 18,4 19,0
4,5 5,0 5,1 5,6
3,5 3,7 3,7 3,8
12,5 14,4 14,7 16,6
...19,6
...20,0637 637
58 158
610 19,8 20,5
6,3 6,9
4,0 4,1
18,9 21,0
6300
HW = 6,0 mV = 6,3/1 m/min
SH 4016-25 4/1 L21 Am
7,6/1,1 0,09/0,37 2x0,15/0,63 ...5,5...7,3...9,0...10,4
2500 3130 527547567607
----
570 600 230 170 K2=343
b2=490
18,719,620,220,8
4,34,04,04,2
3,73,94,04,1
10,211,312,313,6
...12,2
...14,0
...15,6
...16,3
517517617617
-1733-1733
21,522,222,923,3
4,65,15,65,9
4,34,44,64,7
15,417,319,120,4
...17,9
...20,0637637
58158
610 23,724,7
6,17,1
4,74,9
21,325,2
8000
HW = 6,0 mV = 6,3/1 m/min
SH 5020-25 4/1 L22m
9,5/1,5 0,12/0,55 2x0,15/0,63 ...6,0...8,8
2500 3130 567607
--
670 580 230 170 K2=408
b2=550
23,024,4
5,04,7
4,64,9
11,313,1
...10,2 517 -17 25,0 4,8 5,0 14,6
...11,1
...12,8
...14,4
...15,8
3230 545545645645
-455
-455
260 180 25,726,427,227,7
5,25,66,06,5
5,15,35,45,5
16,218,119,821,6
2x0,30/1,20 ...16,6...19,3...20,0
665665765
30130130
610 27,926,130,0
6,57,58,3
5,65,86,0
21,826,529,7
10.000
HW = 6,0 mV = 5/0,8 m/minSH 5025-20 4/1
2m
9,5/1,5 0,12/0,55 2x0,30/1,20 ...6,0 2500 3230 635 - 670 580 260 180 K2=408
b2=550
28,6 6,1 5,7 15,1...9,3...11,7...13,1...14,6
545545645645
-455
-455
30,431,532,232,9
5,65,96,16,5
6,16,36,46,6
17,519,721,323,4
...15,2
...17,8
...20,0
665665765
30130130
610 33,034,235,5
6,57,48,5
6,66,87,1
23,527,932,8
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
D D 2 D 5 D 8 D 9 D 10 D 11 D 12 D 13 D 20
K 1 K 2
b 1 b 2 R max R min Hs Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Ausführung "B"
Maßskizzen ↑ 2/6.
Design "B"
Dimensional sketches ↑ 2/6.
Exécution "B"
Croquis dimensionaux ↑ 2/6.
KR02
_32.
FM
LaufkraneOverhead Travelling CranesPonts roulants posés
2/10 09.02
Die Technik im Überblick Technical Features at a Glance La technique en un coup d’œil
Diese Produktinformation enthält Einträgerlaufkrane (EL- ..) und Zweiträgerlaufkrane (ZL ..) in der Normausführung.Darüber hinaus gibt es noch wei-tere vorbereitete Optionen, die schnell und preisgünstig lieferbar sind, wie zum Beispiel:
• Andere Hub- und Fahrge-schwindigkeiten
• Seitenbühnen (nur bei ZL ..)• Überlastabschaltung• Betriebshubendschalter• Katzfahrendschalter/Kran-
fahrendschalter• Krandistanzierung• Temperaturüberwachung aller
Motore• Funkfernsteuerung• Stufenlose STAHLTRONIC-
Frequenzsteuerung• Sicherheitsfahrschaltung
gegen Hindernisse.
Bei den Einträgerlaufkranen haben Sie die Wahl zwischen drei Ausführungen:
Bei der Ausführung EL-A .. ist die Kranbrückenoberseite mit der Kopfträgeroberseite bündig, ↑ 2/12.
Bei der Ausführung EL-B .. ist die Kranbrückenunterseite mit der Kopfträgerunterseite bündig, ↑ 2/18.
Bei der Ausführung EL-C .. ist die Kranbrücke auf dem Kopfträger oben aufgesetzt, ↑ 2/24.
Welche dieser Ausführungen die günstigste ist, hängt von den ört-lichen Gegebenheiten ab.
Moderne Fertigungsverfahren und unser zertifiziertes Qualitäts-sicherungssystem nach DIN ISO 9001/ EN 29001 garantieren eine gleichbleibend hohe Qualität der Krane von R. STAHL.
EL-A..
EL-B..
EL-C..
This Product Information comprises single-girder (EL-..) and double-girder (ZL-..) overhead travelling cranes of standard design. In addition, there are further options available which can be supplied quickly and economically, e.g.:
• Other hoisting and travel speeds
• Side platforms (only for ZL-..)• Overload cut-off• Operational hoist limit switch• Cross travel/long travel limit
switches• Crane spacing• Temperature monitoring on all
motors• Radio remote control• STAHLTRONIC frequency
convertor for variable transportation of loads
• Obstructions automatically avoided.
The single girder overhead tra-velling cranes offer you a choice of three designs:
On design EL-A.., the top surface of the crane bridge is flush with the top surface of the endcarriage ↑ 2/12.
On design EL-B.., the bottom surface of the crane bridge is flush with the bottom surface of the end carriage ↑ 2/18.
On design EL-C.., the crane bridge is mounted on top of the end-carriage, ↑ 2/24.
Structural features determine which of these designs is the most suitable.
Modern manufacturing procedu-res and our certified quality assurance system to DIN ISO 9001/EN 29001 guarantee consistently high quality for R. STAHL cranes.
Ces Renseignements sur le Produit contiennent les ponts roulants posés monopoutre (EL-..) et bipoutre (ZL-..) dans l'exécution standard. En outre, d'autres options sont disponibles rapide-ment et à prix avantageux, p.ex.:
• Autres vitesses de levage, de direction, de translation.
• Passerelles latérales (seule-ment pour ZL-..).
• Mise hors circuit en cas de surcharge.
• Fin de course de levage de ser-vice.
• Fins de course de direction/translation.
• Dispositif anticollision.• Protection des moteurs contre
l'échauffement par sondes thermiques.
• Télécommande radio.• Convertisseur de fréquence
STAHLTRONIC pour le transport de charges sans à-coups.
• Dispositif de contournement automatique des obstacles.
Les ponts roulants posés monopoutres vous donnent la choix entre trois exécutions:
Exécution EL-A..: le côté supérieur de la poutre porteuse est à fleur du côté supérieur du sommier ↑ 2/12.
Exécution EL-B..: le côté inférieur de la poutre porteuse est à fleur du côté inférieur du sommier ↑ 2/18.
Exécution EL-C..: la poutre porteuse est posée sur le som-mier, ↑ 2/24.
A chaque géométrie correspond une solution avantageuse.
Nos techniques de production modernes et notre système d'assurance qualité selon les normes DIN ISO 9001/EN 29001 garantissent une qualité constante des ponts roulants de R. STAHL.
KR02
_32.
FMLaufkrane
Overhead Travelling CranesPonts roulants posés
09.02 2/11
2
Die Technik im Überblick Technical Features at a Glance La technique en un coup d’œil
Kranbrücke Die Kranbrücke ist aus Walzprofil oder aus einem geschweißten Kastenprofil je nachTragfähigkeit und Spurmittenmaß des Krans.
Einstufungnach DIN 15018, H2/B3, andere Einstufungen auf Anfrage.
HubwerkeWahlweise und je nach Tragfä-higkeit werden Qualitäts- Ketten-züge oder Seilzüge von R. STAHL eingesetzt. Diese haben generell:• Zwei Hubgeschwindigkeiten.• Zwei Katzfahrgeschwindig-
keiten 5/20 m/min.
Kopfträger ( 1 )• Rechteckrohr (Ø125-315) bzw.
Schweißkonstruktion (Ø400-500).• Laufräder bis Ø400 mm mit
Spurkränzen (3.1) aus Kugel-graphitguss GGG 70 mit sehr günstigen Laufeigenschaften, Laufräder mit Ø500 mm ohne Spurkranz.
• Führungsrollen bei Laufrad Ø500 mm.
• Hochfeste Schraubverbindung zwischen Kranbrücke und Kopfträgern ( 2 ).
Fahrantrieb ( 5 )• Wartungsarmer Direktantrieb• Besonders komfortables
Anfahr- und Bremsverhalten für minimales Lastpendeln.
• Sehr geräuscharm durch Schräg-verzahnung aller Getriebestufen.
• Zwei Fahrgeschwindigkeiten 10/40 m/min, andere Geschwin-digkeiten auf Anfrage.
SteuerungSchützsteuerung, Steuer-spannung 230 oder 42 V.• Bedienungsfreundliches Steuer-
gerät; entlang der Kranbrücke unabhängig vom Hubwerk ver-fahrbar.
Korrosionsschutz• Stahlkiesentrostung Grad 2,5
nach DIN 18364.• Zinkphosphat-Grundierung,
Trockenschichtdicke ca. 60 µm, Farbton oxidgelb.
Zulässige Umgebungstemperatur-20°C...+40°C.
Crane bridgeDepending on the lifting capacity and the span of the crane, the crane bridge is a rolled section or a welded box section.
Classificationto DIN 15018, H2/B3, other classifications on request.
HoistsAccording to requirements and lifting capacity, quality R. STAHL chain or wire rope hoists are used. As standard, these have:• Two hoisting speeds• Two cross travelling speeds
5/20 m/min.
End carriages ( 1 )• Rectangular tube (Ø125-315) or
welded structure (Ø400-500). • Flanged wheels up to Ø400 mm
(3.1) in spheroidal graphite cast iron GGG 70 with very favourable running characteristics, Ø500 mm without flanges.
• Guide rollers with wheel Ø500 mm.
• High-tensile bolt connection between crane girder and end carriage ( 2 ).
Travel drive ( 5 )• Low-maintenance direct drive• Particularly smooth
acceleration and braking characteristics for minimum swinging of load
• Very little noise due to helical gearing of all gear steps.
• Two travelling speeds 10/40 m/min, other speeds on request.
ControlsContactor control, control voltage 230 or 42 V.• Easy-to-operate control
pendant; can be moved along the crane bridge independent of the hoist.
Corrosion protection• Steel shot de-rusting grade 2.5
to DIN 18364• Zinc phosphate primer, dry film
thickness approx. 60 µm, colour yellow oxide.
Permissible ambient temperature-20°C...+40°C .
Poutre porteuseSelon la capacité de charge et la portée du pont, la poutre porteuse est un profil laminé ou un profil soudé en caisson.
Classificationselon DIN 15018, H2/B3, autres clas-sifications possibles sur demande.
PalansAu choix et selon la capacité de charge, un palan à chaîne ou un palan à câble de haute qualité de R. STAHL est employé. Les versions standard de nos palans sont:• Deux vitesses de levage• Deux vitesses de direction
5/20 m/min.
Sommier ( 1 )• Tuyau rectangulaire (Ø125-315)
ou construction soudée (Ø400-500). • Galet avec boudins jusqu'à
Ø400 mm (3.1) de fonte sphéroïdale graphitée GGG 70 aux caractéristiques de roule-ment très avantageuses, Ø500 mm sans boudins.
• Galet de Ø500 avec galets de guidage.
• Fixation de la poutre porteuse au sommier par boulons à haute résistance ( 2 ).
Groupe d'entraînement ( 5 )• Entraînement à attaque directe
nécessitant peu d'entretien• Freinage et roulement doux
pour minimaliser l'oscillation de la charge.
• Trés silencieux grâce à la den-ture hélicoïdale à tous les étages.
• Deux vitesses de translation 10/40 m/min, les autres vitesses sont disponibles sur demande.
CommandeCommande par contacteurs Très basse Tension 230 ou 42 V.• Boîte de commande agréable à
manier; déplaçable le long de la poutre porteuse indépendam-ment du palan.
Protection contre la corrosion• Sablage SA 2,5 selon DIN 18364• Couche primaire de phosphate
de zinc, épaisseur de la couche sèche env. 60 µm, couleur jaune oxyde.
Température ambiante admissible-20°C...+40°C .
KR02
_32.
FM
Einträgerlaufkrane EL-ASingle Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
2/12 09.02
Die Technik im Überblick ↑ 2/10. Technical features at a glance ↑ 2/10. La technique en un coup d’œil ↑ 2/10.
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]1000
HW = 3 m V = 6/1,5 m/min
ST 1005-12/3 2/1 1Am
1,2/0,3 0,05/0,2 2x0,09/0,37 ...9,5 1250 1782 295 -5 680 660 K1=519
b1=437
7,7 3,1 2,4 0,8 2,9...10,0...12,0
1600 2132 -535
7,78,5
3,13,8
2,12,4
0,70,9
2,94,0
...12,3
...13,6
...14,7
...15,0
2000 2532 35557595
8,89,3
10,110,3
4,14,55,35,5
2,22,32,52,6
0,70,80,91,0
4,35,16,26,6
...15,7 2500 3032 95 10,6 5,7 2,4 0,8 7,0
...16,6
...17,9
...18,5
115155290
11,112,111,4
6,27,26,4
2,52,72,5
0,91,01,0
7,89,58,3
...21,2
...22,9
...23,2
...23,5
3150 3672 335 250260260360
12,914,716,417,7
7,99,711,412,7
2,52,93,23,5
1,01,11,11,1
10,914,117,620,2
2x0,12/0,55 ...25,0...26,5...26,6...27,9...28,0...29,9...30,0
4000 4596 370 325445430525530635735
19,221,522,523,725,028,231,5
14,116,417,418,619,923,126,4
3,33,73,84,14,34,85,4
0,91,01,01,11,11,11,1
15,919,821,724,026,533,140,3
*1 Lampen, Rohre u.ä.*2 DB Lademaß*3 Stromzuführung*4 verfahrbares Steuergerät
*1 Lamps, pipes or similar*2 Railway loading gauge*3 Power supply*4 Mobile control pendant
*1 Lampes, tuyaux, etc.*2 Gabarit d’encombrement du SNCF*3 Gaine d’alimentation électrique*4 Boîte de commande mobile
KR02
_32.
FMEinträgerlaufkrane EL-A
Single Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
09.02 2/13
2
1000
HW = 12,0 mV = 12,5/2 m/min
SH 3005-25 2/1 L23m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...9,5 1250 1782 295 -5 710 850 K2=328
b2=540
8,8 3,2 2,7 1,1 3,7...11,7...12,0
1600 2132 3555
9,610,1
3,94,4
2,72,8
1,11,2
4,85,5
...13,0
...14,1
...15,0
2000 2532 557595
10,410,911,4
4,65,15,6
2,62,72,9
1,01,21,3
5,96,77,5
...16,0
...17,8
...18,0
...18,5
2500 3032 115155205290
12,213,214,012,5
6,37,38,06,5
2,73,03,12,8
1,11,21,31,3
8,810,611,99,2
...20,4
...22,33150 3672 335 250
26013,815,5
7,79,5
2,73,1
1,21,3
11,514,8
...23,2
...23,5260360
615 17,618,8
11,412,7
3,43,7
1,41,4
18,821,4
2x0,12/0,55 ...25,0...26,5...27,9...29,9...30,0
4000 4596 370 325425525635735
20,322,624,829,332,6
14,216,418,723,226,4
3,53,94,25,05,6
1,21,21,31,41,4
16,920,925,134,441,6
1600
HW = 3,0 mV = 8/2 m/min
ST 3016-8/2 1/11 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...8,4...9,5
1250 1782 295 -535
710 690 K1=589
b1=507
10,310,9
3,23,6
3,23,4
0,91,1
2,73,4
...10,7
...12,01600 2132 35
5511,212,0
3,84,5
3,13,3
1,01,3
3,74,8
...13,1
...14,02000 2532 75
9512,613,1
5,05,4
3,23,3
1,21,3
5,66,4
...15,0 115 13,7 5,9 3,4 1,4 7,2
...16,7
...17,9
...18,5
2500 3032 155205290
14,916,014,5
7,18,16,6
3,33,63,2
1,41,51,5
9,311,18,4
...19,3
...21,1
...22,3
...23,5
3150 3672 335 250260260360
15,517,319,320,8
7,69,311,312,8
3,03,43,84,1
1,31,51,61,7
10,213,417,320,4
2x0,12/0,55 ...25,0...26,5...26,6...27,9...29,0...29,9...30,0
4000 4596 370 325445430525530635735
22,324,625,626,828,831,434,6
14,216,517,518,720,723,226,4
3,84,24,44,64,95,45,9
1,41,61,61,71,71,81,8
23,628,621,924,228,233,440,5
1600
HW = 12,0 m V = 10/1,6 m/min
SH 3008-20 2/1 L22m
3,0/0,5 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 295 -535
710 850 K2=328
b2=540
12,012,5
3,33,7
3,73,8
1,11,4
3,44,1
...10,4
...11,7
...12,0
1600 2132 355575
12,813,513,8
3,94,64,8
3,53,83,8
1,31,51,6
4,45,55,9
...12,7
...13,7
...14,7
...15,0
2000 2532 7595
115155
14,014,515,015,5
5,05,56,06,4
3,53,63,83,9
1,41,51,71,8
6,37,18,08,8
...16,4
...18,0
...18,5
2500 3032 155205290
16,017,315,8
6,98,16,6
3,63,83,5
1,61,81,8
9,711,99,2
...18,9
...20,83150 3672 335 250
26016,518,3
7,49,1
3,23,6
1,51,7
10,613,8
...22,0
...23,5260360
615 20,322,0
11,112,8
4,04,3
1,82,0
17,821,4
2x0,12/0,55 ...25,0...26,5...27,9...29,9...30,0
4000 4596 370 325425525635735
23,525,828,032,535,8
14,316,518,723,226,5
4,04,44,85,66,1
1,71,81,92,12,1
16,920,925,134,441,6
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/12. Dimensional sketches ↑ 2/12. Croquis dimensionaux ↑ 2/12.
KR02
_32.
FM
Einträgerlaufkrane EL-ASingle Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
2/14 09.02
2000
HW = 3,0 m V = 6/1,5 m/min
ST 2010-12/3 2/11 Am
2,3/0,57 0,05/0,2 2x0,09/0,37 ...7,9...9,5
1250 1782 295 -535
320 690 K1=589
b1=545
12,112,8
3,43,8
3,73,9
0,91,3
2,73,4
...10,1
...11,4
...12,0
1600 2132 355575
13,113,614,2
4,04,44,9
3,63,83,9
1,11,31,5
3,74,55,2
...12,4
...13,42000 2532 75
9514,214,7
4,85,3
3,63,7
1,21,4
5,26,0
...14,3
...15,0115155
15,616,3
5,56,2
3,94,1
1,71,8
6,88,0
...16,1
...17,9
...18,5
2500 3032 155205290
16,818,116,6
6,77,96,4
3,84,03,7
1,61,91,8
8,911,18,4
...20,4
...21,7
...23,5
3150 3672 335 260260360
19,121,122,9
8,910,912,6
3,84,24,5
1,71,92,1
12,916,820,4
2x0,12/0,55 ...24,9...26,5...26,6...27,9...28,0...29,9...30,0
4000 4596 370 325425430525530635735
24,426,727,728,930,233,436,7
14,116,417,418,619,923,126,4
4,24,64,74,95,25,76,3
1,81,92,02,12,12,32,3
16,120,021,924,226,733,440,5
2000
HW = 6,0 mSH 3005-25 4/1 L2
V = 6,3/1 m/min3m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 295 -535
760 800 K2=328
b2=480
12,913,6
3,63,9
4,04,2
1,11,5
3,44,1
...11,0
...12,01600 2132 55
7514,515,0
4,55,0
4,04,2
1,51,7
5,25,9
...13,0
...13,9
...15,0
2000 2532 95115155
15,616,116,9
5,45,96,6
3,94,04,2
1,51,71,9
6,77,58,8
...15,7
...17,8
...18,5
2500 3032 155205300
17,218,818,5
6,88,28,0
3,84,24,1
1,62,02,0
9,211,911,5
...19,9 3150 3672 335 260 19,6 8,9 3,8 1,8 13,3
...21,3
...23,5260360
555 21,623,6
10,912,9
4,24,6
2,02,3
17,321,4
2x0,12/0,55 ...24,5...26,5...27,9...29,9...30,0
4000 4596 370 325425525635735
25,127,429,734,237,5
14,416,618,823,326,5
4,34,75,15,86,4
1,92,12,22,42,4
16,920,925,134,441,6
2500
HW = 3,0 mST 5025-8/2 1/1V = 8/2 m/min
1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...7,1...9,3...9,5
1250 1782 295 -53555
740 740 K1=711
b1=641
14,215,315,6
3,64,14,3
4,44,74,8
0,91,41,5
2,63,64,0
...10,4
...11,5
...12,0
1600 2132 557595
15,916,517,0
4,44,95,3
4,44,64,7
1,31,61,8
4,35,15,8
...12,4
...13,3
...15,0
2000 2532 95115155
17,117,618,7
5,35,76,7
4,34,44,7
1,51,72,0
5,86,68,3
...17,2
...17,9
...18,5
2500 3032 205255300
20,321,320,3
8,19,18,0
4,54,84,5
2,02,22,2
10,912,710,9
...19,2
...20,6
...23,5
3150 3672 335 260260360
21,123,125,4
8,810,712,9
4,14,55,0
1,92,12,5
12,316,120,7
2x0,12/0,55 ...26,5...27,9...29,9...30,0
4000 4596 370 425525635735
29,231,536,039,3
16,618,923,326,6
5,05,46,26,7
2,32,52,72,8
20,324,533,740,9
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/12. Dimensional sketches ↑ 2/12. Croquis dimensionaux ↑ 2/12.
KR02
_32.
FMEinträgerlaufkrane EL-A
Single Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
09.02 2/15
2
3200
HW = 3,0 mST 3016-8/2 2/1V = 4/1 m/min
1 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...6,1...8,4...9,5
1250 1782 295 -53555
740 740 K1=602
b1=586
16,617,918,6
4,04,24,5
5,15,55,7
0,71,21,6
2,23,13,8
...10,5
...11,4
...12,3
...12,5
1600 2132 7595
115155
19,219,820,420,9
4,95,35,86,2
5,95,55,75,8
1,91,82,02,2
4,55,36,16,9
...14,0
...15,02000 2532 155
20521,522,6
6,67,6
5,45,7
2,12,4
7,79,4
...16,1
...17,9
...18,5
2500 3032 205255300
22,924,524,7
7,89,29,4
5,15,55,5
2,12,52,6
9,812,517,4
2x0,12/0,55 ...19,5...22,7...23,5
3150 3672 335 300360460
25,828,129,9
10,412,514,3
5,15,55,9
2,32,83,0
14,919,523,2
...25,6
...26,2
...28,0
...29,9
...30,0
4000 4596 370 425430530635735
31,933,236,037,742,5
16,217,520,221,926,7
5,55,76,16,47,3
2,72,83,03,33,4
19,221,526,821,427,2
3200
HW = 6,0 m V = 5/0,8 m/min
SH 3008-20 4/1 L22m
3,6/0,5 0,09/0,37 2x0,09/0,37 ...6,2...8,1...9,2...9,5
1250 1782 295 -5355575
760 800
K2=328
b2=480
17,418,619,319,6
4,14,44,74,9
5,35,75,96,0
0,81,41,71,9
2,73,74,44,8
...10,2
...11,1
...12,0
1600 2132 7595
115
19,920,621,1
5,15,45,9
5,55,75,9
1,61,92,2
5,25,96,7
...13,6
...15,02000 2532 155
20522,023,4
6,57,6
5,55,9
2,12,6
8,010,1
...15,7
...17,72500 3032 205
25523,725,0
7,89,0
5,35,6
2,22,6
10,612,9
...18,5 300 555 25,5 9,5 5,7 2,8 13,82x0,12/0,55 ...19,1
...22,2
...23,5
3150 3672 335 260360460
26,328,730,7
10,212,314,3
5,25,66,0
2,42,93,2
15,319,824,1
...25,2
...27,9
...29,9
...30,0
4000 4596 370 425525635735
32,535,540,143,3
16,019,023,426,7
5,56,16,87,4
2,83,23,53,6
19,525,134,441,6
4000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,7...7,7...8,7...9,5
1250 1782 295 -5355575
800 800 K1=666
b1=707
19,221,622,322,7
5,34,95,25,3
5,96,66,97,0
0,41,21,61,8
2,13,44,14,4
...10,5
...11,4
...12,0
1600 2132 95115155
23,424,024,6
5,66,06,4
6,56,76,8
1,82,12,3
5,25,96,7
...13,0
...15,02000 2532 155
20525,226,6
6,87,9
6,36,7
2,12,7
7,59,7
...17,0
...17,9
...18,3
2500 3032 255305300
28,029,128,8
9,09,99,7
6,36,56,4
2,73,03,0
11,913,813,3
2x0,12/0,55 ...18,5 400 29,6 10,4 6,6 3,2 14,8...21,5...23,5
3150 3672 335 360460
31,734,0
12,314,5
6,26,7
3,13,6
18,823,5
...24,4
...25,0
...27,2
...27,9
4000 4596 370 425430525530
34,636,838,640,1
14,917,218,920,4
6,86,36,66,9
3,83,23,53,7
16,920,924,227,1
2x0,31/1,25 ...29,9...30,0
4786 475 635630
44,747,9
24,828,1
7,68,2
4,14,2
25,029,0
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/12. Dimensional sketches ↑ 2/12. Croquis dimensionaux ↑ 2/12.
KR02
_32.
FM
Einträgerlaufkrane EL-ASingle Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
2/16 09.02
4000
HW = 6,0 m V = 6,3/1 m/min
SH 4010-25 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...7,4...8,4...9,3...9,5
1250 1782 295 35557595
790 830 K2=343
b2=490
21,922,723,423,7
4,85,05,35,6
6,77,07,27,3
1,31,62,02,1
3,54,25,05,4
...10,2
...11,0
...12,0
1600 2132 95115155
24,124,425,3
5,75,86,4
6,76,87,0
1,92,12,5
5,76,17,3
...12,6
...14,6
...15,0
2000 2532 155205255
25,627,127,9
6,67,78,4
6,46,87,0
2,22,83,0
7,89,9
11,22x0,12/0,55 ...16,6
...18,02500 3032 255
30528,529,8
8,810,0
6,46,6
2,83,2
12,214,5
...18,5 400 610 30,3 10,4 6,8 3,3 15,5
...21,0
...23,53150 3672 335 360
46032,234,8
12,114,5
6,36,8
3,23,8
19,024,4
...23,9
...26,7 4000 4596 370 425
52536,039,1
15,718,6
6,26,7
3,13,6
18,924,4
2x0,31/1,25 ...29,9...30,0
4786 475 530630
45,448,7
24,828,1
7,88,3
4,34,3
25,429,5
5000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,8...7,2...8,9...9,5
1250 1782 295 35557595
800 800 K1=666
b1=707
23,926,127,427,8
6,45,75,96,0
7,38,07,67,7
0,61,21,51,7
2,53,54,65,0
...10,5
...12,0
...12,5
1600 2132 115155205
28,529,530,3
6,36,87,4
7,98,28,4
2,02,62,9
5,76,98,2
...14,0 2000 2532 205 31,0 7,8 7,8 2,8 9,02x0,12/0,55 ...15,0 255 32,1 8,7 8,0 3,2 10,8
...15,9
...17,7
...18,5
2500 3032 255305400
32,433,834,6
8,89,910,6
7,27,57,7
2,83,43,6
11,213,615,0
...20,2
...23,1
...23,5
3150 3672 335 360460465
36,238,839,9
12,014,415,4
7,17,67,8
3,44,24,3
18,023,325,5
...23,8
...26,04000 4596 370 430
52541,142,9
16,618,3
7,07,3
3,54,0
19,823,0
2x0,31/1,25 ...26,6...29,9...30,0
4786 475 425530630
45,749,853,1
21,025,028,2
7,88,59,1
4,24,95,1
20,325,129,2
5000
HW = 6,0 m V = 5/0,8 m/min
SH 4012-20 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...6,4...8,5...9,3...9,5
1250 1782 295 557595
115
790 830 K2=343
b2=490
25,927,528,228,5
5,85,76,06,2
8,08,58,78,8
1,11,82,22,3
3,54,65,45,7
...10,1
...11,61600 2132 115
15528,729,9
6,16,8
8,08,3
2,02,6
5,77,3
2x0,12/0,55 ...12,0 205 30,5 7,3 8,5 2,9 8,2...13,5 ...15,0
2000 2532 205255
31,232,6
7,68,7
7,88,2
2,73,4
9,011,2
...15,4
...17,1 2500 3032 255
30532,634,0
8,69,7
7,37,6
2,83,3
11,213,6
...18,5 3022 335 360 610 35,9 11,4 8,0 3,9 17,0
...19,6
...22,5
...23,5
3150 3672 360460560
36,439,140,9
11,814,215,9
7,17,78,0
3,34,14,5
18,023,327,1
2x0,31/1,25 ...25,3 ...26,0 ...29,7...30,0
4000 4786 475 420425530630
44,245,750,053,5
19,120,624,728,2
7,57,88,69,2
4,04,25,05,2
18,320,025,129,5
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/12. Dimensional sketches ↑ 2/12. Croquis dimensionaux ↑ 2/12.
KR02
_32.
FMEinträgerlaufkrane EL-A
Single Girder Overhead Travelling Cranes EL-APonts roulants posés monopoutre EL-A
09.02 2/17
2
6300
HW = 6,0 mV = 6,3/1,0 m/minSH 4016-25 4/1 L2
1Am
7,6/1,1 0,09/0,37 2x0,09/0,37 ...5,3 1250 1782 295 75 790 830 K2=343
b2=490
31,0 7,5 9,5 0,9 3,72x0,12/0,55 ...7,1 95 32,8 6,7 10,1 1,5 4,4
...8,9...10,3...12,0
1600 2122 335 75115165
34,835,937,5
7,27,68,5
9,710,010,4
1,92,53,4
6,37,59,7
...13,9
...15,02000 2522 215
26538,840,0
9,210,0
9,710,0
3,44,0
11,513,3
...15,6
...16,32500 3022 265
31540,341,1
10,210,9
9,09,2
3,43,7
13,815,3
...17,9
...18,5360460
610 41,843,1
11,212,4
9,39,6
4,24,6
16,318,8
...20,7
...23,53150 3746 370 425
52545,548,4
14,517,1
8,99,5
4,45,4
16,120,9
2x0,31/1,25 ...24,2...27,9...30,0
4000 4786 475 425530630
51,255,360,1
19,823,728,4
8,79,5
10,3
4,65,66,2
19,023,829,6
8000
HW = 6,0 mV = 6,3/1,0 m/minSH 5020-25 4/1 L2
2m
9,5/1,5 0,12/0,55 2x0,12/0,55 ...6,2...8,9
...11,2
...12,0
1600 2122 335 75115165215
920 930 K2=408
b2=550
41,044,246,147,1
10,09,39,49,9
11,412,312,813,1
1,22,43,64,1
6,78,8
10,611,9
...12,8
...14,4
...15,0
2000 2522 215265315
47,849,250,1
10,210,811,4
12,012,312,5
3,74,54,9
12,914,816,3
...15,9 2500 3022 315 50,5 11,5 11,3 4,3 16,8
...16,6 360 610 50,8 11,7 11,3 4,6 17,32x0,31/1,25 ...18,5 460 52,8 13,2 11,8 5,5 20,9
...19,3
...22,0
...22,7
...23,5
3150 3746 370 425525530635
54,457,458,760,8
14,617,118,320,2
10,711,311,511,9
4,86,06,46,9
16,521,323,727,6
...26,4 4000 4786 475 530 64,2 23,3 11,0 6,5 23,8
...29,1
...30,04910 550 555
65571,473,7
30,132,3
12,212,6
7,78,0
32,535,4
10000
HW = 6,0 mV = 5/0,8 m/min
SH 5025-20 4/1 L22m
9,5/1,5 0,12/0,55 2x0,31/1,25 ...6,1 1600 2122 335 115 920 930 K2=408
b2=550
49,6 11,9 13,8 1,3 7,1...9,5
...11,7
...13,2
...14,6
2000 2596 370 130180230280
55,057,358,760,1
11,511,712,312,9
13,814,314,715,1
2,53,64,55,4
7,18,8
10,211,7
...15,0 325 610 60,2 12,8 15,1 5,5 11,7
...17,8
...18,52500 3096 425
52563,064,6
14,515,9
14,114,4
6,06,6
15,217,8
...20,4
...21,1
...23,5
3150 3936 475 420425530
67,168,471,6
17,919,121,9
13,213,414,1
6,26,67,9
16,417,821,4
...24,7
...27,1
...29,8
4000 4910 550 455555655
74,779,483,1
24,829,132,4
12,813,614,2
6,98,19,2
25,030,635,1
12500
HW = 12,0 mV = 10/1,6 m/min
SH 6063-20 2/1 L21Am
24,0/3,8 0,31/1,25 0,31/1,25 ...9,1...11,1...13,2
2000 2596 370 180230280
950 1485 K2=597
b2=980
69,271,573,7
13,813,513,8
17,317,918,5
3,14,35,7
7,48,8
10,6...15,0 425 930 75,8 14,7 19,0 7,1 12,8...16,6...17,3...18,5
2500 3286 475 325420425
78,779,981,7
16,817,618,8
17,617,818,2
7,07,68,6
13,314,416,1
...19,4
...22,9
...23,5
3150 3936 425530630
82,386,689,7
19,222,425,3
16,217,017,6
7,39,5
10,3
16,721,124,7
...25,6
...28,04000 4910 550 555
65593,496,9
28,631,6
16,016,6
9,310,6
29,033,1
16000
HW = 8,5 mV = 8/1,3 m/min
SHR 6040-32 4/1 L21 Am
24,0/3,8 0,31/1,25 0,31/1,25 ...5,8...7,5
2000 2596 370 180230
935 1500 K2=597
b2=670
78,382,4
19,016,7
19,620,6
1,52,4
7,68,8
...9,2 2786 475 175 86,7 17,0 21,7 3,7 10,2...14,1...15,0
325420
705 92,994,4
17,017,8
23,323,6
7,48,3
13,614,8
...16,6
...18,52500 3286 420
53095,899,4
18,220,7
21,422,2
7,89,6
15,919,3
...21,1
...23,7
...25,0
4000 4910 550 455555655
103,7108,5110,9
23,927,929,9
17,718,519,0
7,79,4
10,3
23,829,332,1
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 6 L 8 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/12. Dimensional sketches ↑ 2/12. Croquis dimensionaux ↑ 2/12.
KR02
_32.
FM
Einträgerlaufkrane EL-BSingle Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
2/18 09.02
Die Technik im Überblick ↑ 2/10. Technical features at a glance ↑ 2/10. La technique en un coup d’œil ↑ 2/10.
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]1000
HW = 3 m V = 6/1,5 m/min
ST 1005-12/3 2/1 1Am
1,2/0,3 0,05/0,2 2x0,09/0,37 ...9,5 1250 1782 295 5 385 385 K1=519
b1=437
7,7 3,1 2,4 0,8 2,9...10,0...12,0
1600 2132 295335
7,78,5
3,13,8
2,12,4
0,70,9
2,94,0
...12,3
...13,6
...14,7
...15,0
2000 2532 335355375395
8,89,3
10,110,3
4,14,55,35,5
2,22,32,52,6
0,70,80,91,0
4,35,16,26,6
...15,7 2500 3032 395 10,6 5,7 2,4 0,8 7,0
...16,6
...17,9
...18,5
415455590
11,212,211,5
6,17,16,4
2,52,72,6
0,91,01,1
7,89,58,3
...21,2
...22,9
...23,2
...23,5
3150 3672 590600600700
13,014,816,517,8
7,89,611,312,6
2,62,93,23,5
1,01,11,11,1
10,914,117,620,2
2x0,12/0,55 ...25,0...26,5...26,6...27,9...28,0...29,9...30,0
4000 4596 705805810905910
10151115
10 19,321,522,523,825,028,331,5
14,116,317,318,619,823,126,3
3,33,73,84,14,34,85,4
1,01,01,01,11,11,21,2
15,919,821,724,026,533,140,3
*1 Lampen, Rohre u.ä.*2 DB Lademaß*3 Stromzuführung*4 verfahrbares Steuergerät
*1 Lamps, pipes or similar*2 Railway loading gauge*3 Power supply*4 Mobile control pendant
*1 Lampes, tuyaux, etc.*2 Gabarit d’encombrement du SNCF*3 Gaine d’alimentation électrique*4 Boîte de commande mobile
KR02
_32.
FMEinträgerlaufkrane EL-B
Single Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
09.02 2/19
2
1000
HW = 12,0 mV = 12,5/2 m/min
SH 3005-25 2/1 L23m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...9,5 1250 1782 295 5 710 850 K2=328
b2=540
8,8 3,2 2,7 1,1 3,7...11,7...12,0
1600 2132 335355
9,610,1
3,94,4
2,72,8
1,11,2
4,85,5
...13,0
...14,1
...15,0
2000 2532 355375395
10,410,911,4
4,65,15,6
2,62,72,9
1,01,21,3
5,96,77,5
...16,0
...17,8
...18,0
...18,5
2500 3032 415455505590
12,213,214,012,5
6,37,38,06,5
2,73,03,12,8
1,11,21,31,3
8,810,611,99,2
...20,4
...22,33150 3672 590
60013,815,5
7,79,5
2,73,1
1,21,3
11,514,8
...23,2
...23,5600700
615 17,618,8
11,412,7
3,43,7
1,41,4
18,821,4
2x0,12/0,55 ...25,0...26,5...27,9...29,9...30,0
4000 4596 705805905
10151115
10 20,322,624,829,332,6
14,216,418,723,226,4
3,53,94,25,05,6
1,21,21,31,41,4
16,920,925,134,441,6
1600
HW = 3,0 mV = 8/2 m/min
ST 3016-8/2 1/11 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...8,4...9,5
1250 1782 295335
5 415 415 K1=589
b1=507
10,310,9
3,23,6
3,23,4
0,91,1
2,73,4
...10,7
...12,01600 2132 335
35511,212,0
3,84,5
3,13,4
1,01,3
3,74,8
...13,1
...14,02000 2532 375
39512,613,1
5,05,4
3,23,3
1,21,3
5,66,4
...15,0 415 13,8 5,7 3,5 1,5 7,2
...16,7
...17,9
...18,5
2500 3032 455505590
15,116,114,6
7,07,96,4
3,43,63,3
1,41,61,6
9,311,18,4
...19,3
...21,1
...22,3
...23,5
3150 3672 590600600700
15,617,419,420,9
7,49,211,212,7
3,13,43,84,1
1,31,51,61,8
10,213,417,320,4
2x0,12/0,55 ...25,0...26,5...26,6...27,9...29,0...29,9...30,0
4000 4596 705805810905910
10151115
10 22,424,725,726,928,931,434,7
14,116,417,418,620,623,126,4
3,84,24,44,64,95,45,9
1,51,61,61,71,81,81,8
23,628,621,924,228,233,440,5
1600
HW = 12,0 m V = 10/1,6 m/min
SH 3008-20 2/1 L22m
3,0/0,5 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 295335
5 710 850 K2=328
b2=540
12,012,5
3,33,7
3,73,8
1,11,4
3,44,1
...10,4
...11,7
...12,0
1600 2132 335355375
12,813,513,8
3,94,64,8
3,53,83,8
1,31,51,6
4,45,55,9
...12,7
...13,7
...14,7
...15,0
2000 2532 375395415455
14,014,515,015,5
5,05,56,06,4
3,53,63,83,9
1,41,51,71,8
6,37,18,08,8
...16,4
...18,0
...18,5
2500 3032 455505590
16,017,315,8
6,98,16,6
3,63,83,5
1,61,81,8
9,711,99,2
...18,9
...20,83150 3672 590
60016,518,3
7,49,1
3,23,6
1,51,7
10,613,8
...22,0
...23,5600700
615 20,322,0
11,112,8
4,04,3
1,82,0
17,821,4
2x0,12/0,55 ...25,0...26,5...27,9...29,9...30,0
4000 4596 705805905
10151115
10 23,525,828,032,535,8
14,316,518,723,226,5
4,04,44,85,66,1
1,71,81,92,12,1
16,920,925,134,441,6
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/18. Dimensional sketches ↑ 2/18. Croquis dimensionaux ↑ 2/18.
KR02
_32.
FM
Einträgerlaufkrane EL-BSingle Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
2/20 09.02
2000
HW = 3,0 m V = 6/1,5 m/min
ST 2010-12/3 2/11 Am
2,3/0,57 0,05/0,2 2x0,09/0,37 ...7,9...9,5
1250 1782 295335
5 415 415 K1=589
b1=545
12,112,8
3,43,8
3,73,9
0,91,3
2,73,4
...10,1
...11,4
...12,0
1600 2132 335355375
13,113,614,2
4,04,44,9
3,63,83,9
1,11,31,5
3,74,55,2
...12,4
...13,42000 2532 375
39514,214,7
4,85,3
3,63,7
1,21,4
5,26,0
...14,3
...15,0415455
15,516,3
5,66,3
3,94,1
1,61,8
6,88,0
...16,1
...17,9
...18,5
2500 3032 455505590
16,818,116,6
6,88,06,5
3,74,03,7
1,61,81,8
8,911,18,4
...20,4
...21,7
...23,5
3150 3672 600600700
19,121,122,9
9,011,012,7
3,74,14,5
1,71,92,1
12,916,820,4
2x0,12/0,55 ...24,9...26,5...26,6...27,9...28,0...29,9...30,0
4000 4596 705805810905910
10151115
10 24,426,627,628,930,133,436,7
14,216,417,418,719,923,126,4
4,24,64,74,95,25,76,3
1,81,91,92,12,12,22,3
16,120,021,924,226,733,440,5
2000
HW = 6,0 mSH 3005-25 4/1 L2
V = 6,3/1 m/min3m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 295335
5 760 800 K2=328
b2=480
12,913,6
3,63,9
4,04,2
1,11,5
3,44,1
...11,0
...12,01600 2132 355
37514,515,0
4,55,0
4,04,2
1,51,7
5,25,9
...13,0
...13,9
...15,0
2000 2532 395415455
15,616,116,9
5,45,96,6
3,94,04,2
1,51,71,9
6,77,58,8
...15,7
...17,8
...18,5
2500 3032 455505600
17,218,818,5
6,88,28,0
3,84,24,1
1,62,02,0
9,211,911,5
...19,9 3150 3672 600 19,6 8,9 3,8 1,8 13,3
...21,3
...23,5600700
555 21,623,6
10,912,9
4,24,6
2,02,3
17,321,4
2x0,12/0,55 ...24,5...26,5...27,9...29,9...30,0
4000 4596 705805905
10151115
10 25,127,429,734,237,5
14,416,618,823,326,5
4,34,75,15,86,4
1,92,12,22,42,4
16,920,925,134,441,6
2500
HW = 3,0 mST 5025-8/2 1/1V = 8/2 m/min
1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...7,1...9,3...9,5
1250 1782 295335355
5 445 445 K1=711
b1=641
14,315,315,6
3,64,04,2
4,44,74,8
0,91,41,5
2,63,64,0
...10,4
...11,5
...12,0
1600 2132 355375395
15,916,517,1
4,44,85,3
4,44,64,7
1,41,61,8
4,35,15,8
...12,4 2000 2532 395 17,1 5,3 4,3 1,5 5,8
...13,3
...15,0415455
17,919,0
5,46,4
4,54,7
1,82,1
6,68,3
...17,2
...17,9
...18,5
2500 3032 505555600
20,521,520,5
7,88,87,8
4,64,84,6
2,12,32,3
10,912,710,9
...19,2
...20,6
...23,5
3150 3672 600600700
21,323,325,6
8,610,512,8
4,24,65,0
1,92,22,6
12,316,120,7
2x0,12/0,55 ...26,5...27,9...29,9...30,0
4000 4596 805905
10151115
10 29,431,636,239,4
16,518,723,226,4
5,05,46,26,7
2,42,62,82,8
20,324,533,740,9
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/18. Dimensional sketches ↑ 2/18. Croquis dimensionaux ↑ 2/18.
KR02
_32.
FMEinträgerlaufkrane EL-B
Single Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
09.02 2/21
2
3200
HW = 3,0 mST 3016-8/2 2/1V = 4/1 m/min
1 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...6,1...8,4...9,5
1250 1782 295335355
5 445 445 K1=602
b1=586
16,718,018,7
3,94,14,5
5,15,55,7
0,71,31,6
2,23,13,8
...10,5
...11,41600 2132 375
39519,319,9
4,95,3
5,45,5
1,51,8
4,55,3
...12,0 415 20,8 5,4 5,8 2,1 6,1
...12,3
...14,0
...15,0
2000 2532 415455505
20,821,922,9
5,46,37,2
5,25,55,7
1,82,22,5
6,17,79,4
...16,1
...17,9
...18,5
2500 3032 505555600
23,224,725,0
7,58,99,2
5,25,55,6
2,22,62,7
9,812,517,4
2x0,12/0,55 ...19,5...22,7...23,5
3150 3672 600700800
26,028,330,1
10,112,314,1
5,15,65,9
2,42,93,1
14,919,523,2
...25,6
...26,2
...28,0
...29,9
...30,0
4000 4596 805810910
10151115
10 32,133,436,137,942,7
16,017,320,021,726,5
5,55,76,26,57,3
2,72,83,13,43,4
19,221,526,830,340,6
3200
HW = 6,0 m V = 5/0,8 m/min
SH 3008-20 4/1 L22m
3,6/0,5 0,09/0,37 2x0,09/0,37 ...6,2...8,1...9,2...9,5
1250 1782 295335355375
5 760 800 K2=328
b2=480
17,418,619,319,6
4,14,44,74,9
5,35,75,96,0
0,81,41,71,9
2,73,74,44,8
...10,2
...11,1
...12,0
1600 2132 375395415
19,920,621,1
5,15,45,9
5,55,75,9
1,61,92,2
5,25,96,7
...13,6
...15,02000 2532 455
50522,023,4
6,57,6
5,55,9
2,12,6
8,010,1
...15,7
...17,72500 3032 505
55523,725,0
7,89,0
5,35,6
2,22,6
10,612,9
...18,5 600 555 25,5 9,5 5,7 2,8 13,82x0,12/0,55 ...19,1
...22,2
...23,5
3150 3672 600700800
26,328,730,7
10,212,314,3
5,25,66,0
2,42,93,2
15,319,824,1
...25,2
...27,9
...29,9
...30,0
4000 4596 805905
10151115
10 32,535,540,143,3
16,019,023,426,7
5,56,16,87,4
2,83,23,53,6
19,525,134,441,6
4000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,7...7,7...8,7...9,5
1250 1782 295335355375
5 505 505 K1=666
b1=707
19,621,822,522,9
4,94,75,05,1
6,06,76,97,0
0,51,31,61,9
2,13,44,14,4
...10,5 1600 2132 395 23,6 5,4 6,6 1,8 5,2....11,4...12,0
415455
24,224,8
5,86,2
6,76,9
2,12,4
5,96,7
...13,0
...15,02000 2532 455
50525,426,8
6,67,7
6,46,7
2,22,8
7,59,7
...17,0
...17,9
...18,3
2500 3032 555605600
28,129,228,9
8,99,89,6
6,36,56,5
2,73,03,1
11,913,813,3
2x0,12/0,55 ...18,5 700 29,7 10,3 6,6 3,2 14,8...21,5...23,5
3150 3672 700800
31,834,1
12,214,4
6,26,7
3,23,7
18,823,5
...24,4
...25,0
...27,2
...27,9
4000 4596 805810905910
10 34,636,938,740,2
14,917,118,820,3
6,86,36,66,9
3,83,23,63,7
16,920,924,227,1
2x0,31/1,25 ...29,9...30,0
4786 10201120
15 44,848,0
24,728,0
7,68,2
4,14,2
25,029,0
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/18. Dimensional sketches ↑ 2/18. Croquis dimensionaux ↑ 2/18.
KR02
_32.
FM
Einträgerlaufkrane EL-BSingle Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
2/22 09.02
4000
HW = 6,0 m V = 6,3/1 m/min
SH 4010-25 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...7,4...8,4...9,3...9,5
1250 1782 335355375395
5 790 830 K2=343
b2=490
21,922,723,423,7
4,85,05,35,6
6,77,07,27,3
1,31,62,02,1
3,54,25,05,4
...10,2
...11,0
...12,0
1600 2132 395415455
24,124,425,3
5,75,86,4
6,76,87,0
1,92,12,5
5,76,17,3
...12,6
...14,6
...15,0
2000 2532 455505555
25,627,127,9
6,67,78,4
6,46,87,0
2,22,83,0
7,89,9
11,22x0,12/0,55 ...16,6
...18,02500 3032 555
60528,529,8
8,810,0
6,46,6
2,83,2
12,214,5
...18,5 700 610 30,3 10,4 6,8 3,3 15,5
...21,0
...23,53150 3672 700
80032,234,8
12,114,5
6,36,8
3,23,8
19,024,4
...23,9
...26,7 4000 4596 805
90510 36,0
39,115,718,6
6,26,7
3,13,6
18,924,4
2x0,31/1,25 ...29,9...30,0
4786 10201120
15 45,448,7
24,828,1
7,88,3
4,34,3
25,429,5
5000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,8...7,2...8,9...9,5
1250 1782 335355375395
5 505 505 K1=666
b1=707
24,426,427,728,1
5,95,35,65,7
7,58,17,77,8
0,61,31,51,7
2,53,54,65,0
...10,5
...12,01600 2132 415
45528,729,7
6,06,5
8,08,3
2,12,7
5,76,9
...14,0 2000 2532 505 31,2 7,6 7,8 2,8 9,02x0,12/0,55 ...15,0 555 32,3 8,5 8,1 3,3 10,8
...15,9
...17,7
...18,5
2500 3032 555605700
32,634,034,7
8,79,810,5
7,37,67,8
2,83,43,7
11,213,615,0
...20,2
...23,1
...23,5
3150 3672 700800805
36,338,940,0
11,914,315,3
7,17,67,8
3,44,24,4
18,023,325,5
...23,8
...26,04000 4596 810
90510 41,2
43,016,518,2
7,07,4
3,64,0
19,823,0
2x0,31/1,25 ...26,6...29,9...30,0
4786 91510201120
15 45,849,953,1
20,924,928,1
7,88,59,1
4,35,05,1
20,325,129,2
5000
HW = 6,0 m V = 5/0,8 m/min
SH 4012-20 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...6,4...8,5...9,3...9,5
1250 1782 355375395415
5 790 830 K2=343
b2=490
25,927,528,228,5
5,85,76,06,2
8,08,58,78,8
1,11,82,22,3
3,54,65,45,7
...10,1
...11,61600 2132 415
45528,729,9
6,16,8
8,08,3
2,02,6
5,77,3
2x0,12/0,55 ...12,0 505 30,5 7,3 8,5 2,9 8,2...13,5 ...15,0
2000 2532 505555
31,232,6
7,68,7
7,88,2
2,73,4
9,011,2
...15,4
...17,1 2500 3032 555
60532,634,0
8,69,7
7,37,6
2,83,3
11,213,6
...18,5 3022 700 610 35,9 11,4 8,0 3,9 17,0
...19,6
...22,5
...23,5
3150 3672 700800900
36,439,140,9
11,814,215,9
7,17,78,0
3,34,14,5
18,023,327,1
2x0,31/1,25 ...25,3 ...26,0 ...29,7...30,0
4000 4786 910915
10201120
15 44,245,750,053,5
19,120,624,728,2
7,57,88,69,2
4,04,25,05,2
18,320,025,129,5
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/18. Dimensional sketches ↑ 2/18. Croquis dimensionaux ↑ 2/18.
KR02
_32.
FMEinträgerlaufkrane EL-B
Single Girder Overhead Travelling Cranes EL-BPonts roulants posés monopoutre EL-B
09.02 2/23
2
6300
HW = 6,0 mV = 6,3/1,0 m/minSH 4016-25 4/1 L2
1Am
7,6/1,1 0,09/0,37 2x0,09/0,37 ...5,3 1250 1782 375 5 790 830 K2=343
b2=490
31,0 7,5 9,5 0,9 3,72x0,12/0,55 ...7,1 395 32,8 6,7 10,1 1,5 4,4
...8,9...10,3...12,0
1600 2122 415455505
34,835,937,5
7,27,68,5
9,710,010,4
1,92,53,4
6,37,59,7
...13,9
...15,02000 2522 555
60538,840,0
9,210,0
9,710,0
3,44,0
11,513,3
...15,6
...16,32500 3022 605
65540,341,1
10,210,9
9,09,2
3,43,7
13,815,3
...17,9
...18,5700800
610 41,843,1
11,212,4
9,39,6
4,24,6
16,318,8
...20,7
...23,53150 3746 805
90510 45,5
48,414,517,1
8,99,5
4,45,4
16,120,9
2x0,31/1,25 ...24,2...27,9...30,0
4000 4786 91510201120
15 51,255,360,1
19,823,728,4
8,79,5
10,3
4,65,66,2
19,023,829,6
8000
HW = 6,0 mV = 6,3/1,0 m/minSH 5020-25 4/1 L2
2m
9,5/1,5 0,12/0,55 2x0,12/0,55 ...6,2...8,9
...11,2
...12,0
1600 2122 415455505555
5 920 930 K2=408
b2=550
41,044,246,147,1
10,09,39,49,9
11,412,312,813,1
1,22,43,64,1
6,78,8
10,611,9
...12,8
...14,4
...15,0
2000 2522 555605655
47,849,250,1
10,210,811,4
12,012,312,5
3,74,54,9
12,914,816,3
...15,9 2500 3022 655 50,5 11,5 11,3 4,3 16,8
...16,6 700 610 50,8 11,7 11,3 4,6 17,32x0,31/1,25 ...18,5 800 52,8 13,2 11,8 5,5 20,9
...19,3
...22,0
...22,7
...23,5
3150 3746 805905910
1015
10 54,457,458,760,8
14,617,118,320,2
10,711,311,511,9
4,86,06,46,9
16,521,323,727,6
...26,4 4000 4786 1020 15 64,2 23,3 11,0 6,5 23,8
...29,1
...30,04910 1135
123530 71,4
73,730,132,3
12,212,6
7,78,0
32,535,4
10000
HW = 6,0 mV = 5/0,8 m/min
SH 5025-20 4/1 L22m
9,5/1,5 0,12/0,55 2x0,31/1,25 ...6,1 1600 2122 455 5 920 930 K2=408
b2=550
49,6 11,9 13,8 1,3 7,1...9,5
...11,7
...13,2
...14,6
2000 2596 510560610660
10 55,057,358,760,1
11,511,712,312,9
13,814,314,715,1
2,53,64,55,4
7,18,8
10,211,7
...15,0 705 610 60,2 12,8 15,1 5,5 11,7
...17,8
...18,52500 3096 795
89563,064,6
14,515,9
14,114,4
6,06,6
15,217,8
...20,4
...21,1
...23,5
3150 3936 910915
1020
15 67,168,471,6
17,919,121,9
13,213,414,1
6,26,67,9
16,417,821,4
...24,7
...27,1
...29,8
4000 4910 103511351235
30 74,779,483,1
24,829,132,4
12,813,614,2
6,98,19,2
25,030,635,1
12500
HW = 12,0 mV = 10/1,6 m/min
SH 6063-20 2/1 L21Am
24,0/3,8 0,31/1,25 0,31/1,25 ...9,1...11,1...13,2
2000 2596 560610660
10 950 1485 K2=597
b2=980
69,271,573,7
13,813,513,8
17,317,918,5
3,14,35,7
7,48,8
10,6...15,0 805 930 75,8 14,7 19,0 7,1 12,8...16,6...17,3...18,5
2500 3286 815910915
15 78,779,981,7
16,817,618,8
17,617,818,2
7,07,68,6
13,314,416,1
...19,4
...22,9
...23,5
3150 3936 91510201120
82,386,689,7
19,222,425,3
16,217,017,6
7,39,5
10,3
16,721,124,7
...25,6
...28,04000 4910 1135
123530 93,4
96,928,631,6
16,016,6
9,310,6
29,033,1
16000
HW = 8,5 mV = 8/1,3 m/min
SHR 6040-32 4/1 L21 Am
24,0/3,8 0,31/1,25 0,31/1,25 ...5,8...7,5
2000 2596 580630
10 935 1500 K2=597
b2=670
78,382,4
19,016,7
19,620,6
1,52,4
7,68,8
...9,2 2786 665 15 86,7 17,0 21,7 3,7 10,2...14,1...15,0
815910
705 92,994,4
17,017,8
23,323,6
7,48,3
13,614,8
...16,6
...18,52500 3286 895
100595,899,4
18,220,7
21,422,2
7,89,6
15,919,3
...21,1
...23,7
...25,0
4000 4910 103511351235
30 103,7108,5110,9
23,927,929,9
17,718,519,0
7,79,4
10,3
23,829,332,1
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/18. Dimensional sketches ↑ 2/18. Croquis dimensionaux ↑ 2/18.
KR02
_32.
FM
Einträgerlaufkrane EL-CSingle Girder Overhead Travelling Cranes EL-CPonts roulants posés monopoutre EL-C
2/24 09.02
Die Technik im Überblick ↑ 2/10. Technical features at a glance ↑ 2/10. La technique en un coup d’œil ↑ 2/10.
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]1000
HW = 3 m V = 6/1,5 m/min
ST 1005-12/3 2/1 1Am
1,2/0,3 0,05/0,2 2x0,09/0,37 ...9,5 1250 1782 546 256 385 385 K1=519
b1=437
7,7 3,1 2,4 0,8 2,9...10,0...12,0
1600 2132 546586
7,78,5
3,13,8
2,12,4
0,70,9
2,94,0
...12,3
...13,6
...14,7
...15,0
2000 2532 586606626646
8,89,3
10,110,3
4,14,55,35,5
2,22,32,52,6
0,70,80,91,0
4,35,16,26,6
...15,7 2500 3032 646 10,6 5,7 2,4 0,8 7,0
...16,6
...17,9
...18,5
666706841
11,212,211,5
6,17,16,4
2,52,72,6
0,91,01,1
7,89,58,3
...21,2
...22,9
...23,2
...23,5
3150 3672 884894894994
299 13,014,816,517,8
7,89,611,312,6
2,62,93,23,5
1,01,11,11,1
10,914,117,620,2
*1 nicht ebene Decke*2 ebene Decke*3 DB Lademaß*4 Stromzuführung*5 verfahrbares Steuergerät
*1 Uneven ceiling*2 Even ceiling*3 Railway loading gauge*4 Power supply*5 Mobile control pendant
*1 Plafond encombré*2 Plafond plan*3 Gabarit d’encombrement du SNCF*4 Gaine d’alimentation électrique*5 Boîte de commande mobile
KR02
_32.
FMEinträgerlaufkrane EL-C
Single Girder Overhead Travelling Cranes EL-CPonts roulants posés monopoutre EL-C
09.02 2/25
2
1000
HW = 12,0 mV = 12,5/2 m/min
SH 3005-25 2/1 L23m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...9,5 1250 1782 546 256 950 1040 K2=328
b2=540
8,6 3,4 2,6 1,0 3,7...11,7...12,0
1600 2132 586606
690 840 9,510,0
4,04,5
2,62,8
1,11,1
4,85,5
...13,0
...14,1
...15,0
2000 2532 606626646
10,310,811,3
4,75,25,7
2,62,72,8
1,01,11,2
5,96,77,5
...16,0
...17,8
...18,0
...18,5
2500 3032 666706756841
12,113,213,912,4
6,47,38,16,6
2,72,93,12,8
1,11,21,21,2
8,810,611,99,2
2x0,12/0,55 ...20,4...22,3
3150 3672 884894
299 13,715,5
7,89,5
2,73,0
1,11,3
11,514,8
...23,2
...23,5894994
615 17,518,7
11,512,8
3,43,7
1,31,3
18,821,4
1600
HW = 3,0 mV = 8/2 m/min
ST 3016-8/2 1/11 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...8,4...9,5
1250 1782 546586
256 415 415 K1=589
b1=507
10,310,9
3,23,6
3,23,4
0,91,1
2,73,4
...10,7
...12,01600 2132 586
60611,212,0
3,84,5
3,13,4
1,01,3
3,74,8
...13,1
...14,02000 2532 626
64612,613,1
5,05,4
3,23,3
1,21,3
5,66,4
...15,0 666 13,8 5,7 3,5 1,5 7,2
...16,7
...17,9
...18,5
2500 3032 706756841
15,116,114,6
7,07,96,4
3,43,63,3
1,41,61,6
9,311,18,4
...19,3
...21,1
...22,3
...23,5
3150 3672 884894894994
299 15,617,419,420,9
7,49,211,212,7
3,13,43,84,1
1,31,51,61,8
10,213,417,320,4
1600
HW = 12,0 m V = 10/1,6 m/min
SH 3008-20 2/1 L22m
3,0/0,5 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 546586
256 950 1040 K2=328
b2=540
10,911,6
3,64,0
3,33,5
1,01,2
3,44,1
...10,4
...11,7
...12,0
1600 2132 586606626
710 850 11,912,713,0
4,14,85,0
3,33,53,6
1,11,41,4
4,45,55,9
...12,7
...13,7
...14,7
...15,0
2000 2532 626646666706
13,313,814,414,9
5,25,76,16,6
3,33,53,63,7
1,31,41,61,6
6,37,18,08,8
...16,4
...18,0
...18,5
2500 3032 706756841
15,416,715,3
7,18,36,7
3,43,73,4
1,51,71,7
9,711,99,2
2x0,12/0,55 ...18,9...20,8
3150 3672 884894
299 16,017,8
7,59,2
3,13,5
1,41,6
10,613,8
...22,0
...23,5894994
615 19,821,6
11,212,9
3,94,2
1,71,9
17,821,4
2000
HW = 3,0 m V = 6/1,5 m/min
ST 2010-12/3 2/11 Am
2,3/0,57 0,05/0,2 2x0,09/0,37 ...7,9...9,5
1250 1782 546586
256 415 415 K1=589
b1=545
12,112,8
3,43,8
3,73,9
0,91,3
2,73,4
...10,1
...11,4
...12,0
1600 2132 586606626
13,113,614,2
4,04,44,9
3,63,83,9
1,11,31,5
3,74,55,2
...12,4
...13,42000 2532 626
64614,214,7
4,85,3
3,63,7
1,21,4
5,26,0
...14,3
...15,0666706
15,516,3
5,66,3
3,94,1
1,61,8
6,88,0
...16,1
...17,9..18,5
2500 3032 706756841
16,818,116,6
6,88,06,5
3,74,03,7
1,61,81,8
8,911,18,4
...20,4
...21,7
...23,5
3150 3672 894894994
299 19,121,122,9
9,011,012,7
3,74,14,5
1,71,92,1
12,916,820,4
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/24. Dimensional sketches ↑ 2/24. Croquis dimensionaux ↑ 2/24.
KR02
_32.
FM
Einträgerlaufkrane EL-CSingle Girder Overhead Travelling Cranes EL-CPonts roulants posés monopoutre EL-C
2/26 09.02
2000
HW = 6,0 mSH 3005-25 4/1 L2
V = 6,3/1 m/min3m
2,4/0,4 0,09/0,37 2x0,09/0,37 ...8,2...9,5
1250 1782 546586
256 1000 980 K2=328
b2=480
12,613,3
3,94,2
3,94,1
1,01,3
3,44,1
...11,0
...12,01600 2132 606
626750 780 14,2
14,84,85,2
4,04,1
1,41,6
5,25,9
...13,0
...13,9
...15,0
2000 2532 646666706
15,415,916,7
5,66,16,8
3,84,04,2
1,51,61,8
6,77,58,8
...15,7
...17,8
...18,5
2500 3032 706756851
17,018,618,4
7,08,48,1
3,84,24,1
1,61,92,0
9,211,911,5
2x0,12/0,55 ...19,9 3150 3672 894 299 19,4 9,1 3,8 1,7 13,3...21,3...23,5
894994
555 21,523,5
11,013,0
4,24,6
1,92,2
17,321,4
2500
HW = 3,0 mST 5025-8/2 1/1V = 8/2 m/min
1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...7,1...9,3...9,5
1250 1782 546586606
256 445 445 K1=711
b1=641
14,315,315,6
3,64,04,2
4,44,74,8
0,91,41,5
2,63,64,0
...10,4
...11,5
...12,0
1600 2132 606626646
15,916,517,1
4,44,85,3
4,44,64,7
1,41,61,8
4,35,15,8
...12,4 2000 2532 646 17,1 5,3 4,3 1,5 5,8
...13,3
...15,0666706
17,919,0
5,46,4
4,54,7
1,82,1
6,68,3
...17,2
...17,9
...18,5
2500 3032 756806851
20,521,520,5
7,88,87,8
4,64,84,6
2,12,32,3
10,912,710,9
...19,2
...20,6
...23,5
3150 3672 894894994
299 21,323,325,6
8,610,512,8
4,24,65,0
1,92,22,6
12,316,120,7
3200
HW = 3,0 mST 3016-8/2 2/1V = 4/1 m/min
1 Bm
2,3/0,57 0,05/0,2 2x0,09/0,37 ...6,1...8,4...9,5
1250 1782 546586606
256 445 445 K1=602
b1=586
16,718,018,7
3,94,14,5
5,15,55,7
0,71,31,6
2,23,13,8
...10,5
...11,41600 2132 626
64619,319,9
4,95,3
5,45,5
1,51,8
4,55,3
...12,0 666 20,8 5,4 5,8 2,1 6,1
...12,3
...14,0
...15,0
2000 2532 666706756
20,821,922,9
5,46,37,2
5,25,55,7
1,82,22,5
6,17,79,4
...16,1
...17,9
...18,5
2500 3032 756806851
23,224,725,0
7,58,99,2
5,25,55,6
2,22,62,7
9,812,517,4
2x0,12/0,55 ...19,5...22,7...23,5
3150 3672 894994
1094
299 26,028,330,1
10,112,314,1
5,15,65,9
2,42,93,1
14,919,523,2
3200
HW = 6,0 m V = 5/0,8 m/min
SH 3008-20 4/1 L22m
3,6/0,5 0,09/0,37 2x0,09/0,37 ...6,2...8,1...9,2...9,5
1250 1782 546586606626
256 1000 980 K2=328
b2=480
16,718,118,819,2
4,84,95,25,3
5,15,65,85,9
0,71,21,61,7
2,73,74,44,8
...10,2
...11,1
...12,0
1600 2132 626646666
750 780 19,520,220,8
5,55,86,2
5,45,65,8
1,51,82,1
5,25,96,7
...13,6
...15,02000 2532 706
75621,723,1
6,87,9
5,45,8
2,02,5
8,010,1
...15,7
...17,72500 3032 756
80623,424,8
8,19,2
5,25,5
2,12,5
10,612,9
...18,5 851 555 25,3 9,7 5,6 2,7 13,82x0,12/0,55 ...19,1
...22,2
...23,5
3150 3672 894994
1094
299 26,128,530,5
10,412,514,5
5,15,66,0
2,32,93,1
15,319,824,1
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/24. Dimensional sketches ↑ 2/24. Croquis dimensionaux ↑ 2/24.
KR02
_32.
FMEinträgerlaufkrane EL-C
Single Girder Overhead Travelling Cranes EL-CPonts roulants posés monopoutre EL-C
09.02 2/27
2
4000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,7...7,7...8,7...9,5
1250 1782 546586606626
256 505 505 K1=666
b1=707
19,621,822,522,9
4,94,75,05,1
6,06,76,97,0
0,51,31,61,9
2,13,44,14,4
...10,5 1600 2132 646 23,6 5,4 6,6 1,8 5,2
...11,4
...12,0666706
24,224,8
5,86,2
6,76,9
2,12,4
5,96,7
...13,0
...15,02000 2532 706
75625,426,8
6,67,7
6,46,7
2,22,8
7,59,7
...17,0
...17,9
...18,3
2500 3032 806856851
28,129,228,9
8,99,89,6
6,36,56,5
2,73,03,1
11,913,813,3
2x0,12/0,55 ...18,5 951 29,7 10,3 6,6 3,2 14,8...21,5...23,5
3150 3672 9941094
299 31,834,1
12,214,4
6,26,7
3,23,7
18,823,5
4000
HW = 6,0 m V = 6,3/1 m/min
SH 4010-25 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...7,4...8,4...9,3...9,5
1250 1782 586606626646
256 1020 970 K2=343
b2=490
21,322,122,923,2
5,55,65,96,1
6,56,87,07,1
1,11,41,81,9
3,54,25,05,4
...10,2
...11,0
...12,0
1600 2132 646666706
790 830 23,624,024,9
6,26,36,8
6,66,76,9
1,71,92,3
5,76,17,3
...12,6
...14,6
...15,0
2000 2532 706756806
25,226,727,5
7,08,08,7
6,36,76,9
2,02,62,8
7,89,9
11,22x0,12/0,55 ...16,6
...18,02500 3032 806
85628,229,5
9,110,2
6,36,6
2,63,0
12,214,5
...18,5 951 610 30,1 10,7 6,7 3,2 15,5
...21,0
...23,53150 3672 994
1094299 31,9
34,612,314,7
6,36,8
3,13,7
19,024,4
5000
HW = 3,0 m V = 4/1 m/min
ST 5025-8/2 2/1 1 Am
3,8/0,9 0,05/0,2 2x0,09/0,37 ...4,8...7,2...8,9...9,5
1250 1782 586606626646
256 505 505 K1=666
b1=707
24,426,427,728,1
5,95,35,65,7
7,58,17,77,8
0,61,31,51,7
2,53,54,65,0
...10,5
...12,01600 2132 666
70628,729,7
6,06,5
8,08,3
2,12,7
5,76,9
...14,0 2000 2532 756 31,2 7,6 7,8 2,8 9,02x0,12/0,55 ...15,0 806 32,3 8,5 8,1 3,3 10,8
...15,9
...17,7
...18,5
2500 3032 806856951
32,634,034,7
8,79,810,5
7,37,67,8
2,83,43,7
11,213,615,0
...20,2
...23,1
...23,5
3150 3672 99410941099
299 36,338,940,0
11,914,315,3
7,17,67,8
3,44,24,4
18,023,325,5
5000
HW = 6,0 m V = 5/0,8 m/min
SH 4012-20 4/1 L22m
4,8/0,7 0,09/0,37 2x0,09/0,37 ...6,4...8,5...9,3...9,5
1250 1782 606626646666
256 1020 990 K2=343
b2=490
25,026,827,627,9
6,86,56,76,9
7,78,28,58,6
0,91,62,02,1
3,54,65,45,7
...10,1
...11,61600 2132 666
706790 830 28,0
29,46,77,4
7,88,2
1,82,4
5,77,3
2x0,12/0,55 ...12,0 756 30,0 7,8 8,3 2,6 8,2...13,5 ...15,0
2000 2532 756806
30,732,2
8,09,1
7,78,1
2,53,1
9,011,2
...15,4
...17,1 2500 3032 806
85632,233,7
9,010,1
7,27,5
2,63,1
11,213,6
...18,5 3022 994 299 610 35,5 11,7 7,9 3,7 17,0
...19,6
...22,5
...23,5
3150 3672 99410941194
36,138,840,6
12,114,516,2
7,17,68,0
3,24,04,3
18,023,327,1
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L 2 L 5 L 7 L 9 L 10 L 11 K 1K 2
b 1b 2 R max R min Hs Hm Pu
[kg] [kW] [kW] [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/24. Dimensional sketches ↑ 2/24. Croquis dimensionaux ↑ 2/24.
KR02
_32.
FM
Zweiträgerlaufkrane ZLDouble Girder Overhead Travelling Cranes ZLPonts roulants posés bipoutre ZL
2/28 09.02
Die Technik im Überblick ↑ 2/10. Technical features at a glance ↑ 2/10. La technique en un coup d’œil ↑ 2/10.
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L2 L5 L6 L8 L10 L11 L18 b O6R max R min Hs Hm Pu
[kg] [kW] (kW) [kW] [m] [mm] [kN]2000
HW = 6,0 mV = 6,3/1 m/min
SH 3005-25 4/1 L23m
2,4/0,4 0,09/0,37 2x0,12/0,55 ...5,7...7,7
...10,2
...12,4
...13,7
...14,7
...15,0
2000 2522 300 -118-80-400204060
610 700 200 190 385 13,514,816,818,720,221,522,3
4,34,96,58,19,510,711,5
3,43,74,24,75,15,45,6
0,50,81,31,72,02,22,3
4,25,78,611,714,517,018,5
...15,7
...16,6
...18,0
...18,5
2500 3022 6080
120294
22,823,825,923,4
12,012,914,912,4
5,15,35,85,2
1,92,02,32,3
19,621,726,020,6
...20,5
...22,0
...23,5
3150 3672 294348448
24,727,229,2
13,616,118,1
4,85,35,7
2,12,22,4
23,328,833,5
2x0,31/1,25 ...24,8...27,5...29,9...30,0
4000 4596 340 408508608710
31,236,239,845,0
20,025,028,533,7
5,36,26,87,7
2,02,32,52,5
27,938,546,659,6
≥≥
≥≥
≥≥
≤≤≤≤
*1 nicht ebene Decke*2 ebene Decke*3 DB Lademaß*4 Stromzuführung*5 verfahrbares Steuergerät
*1 Uneven ceiling*2 Even ceiling*3 Railway loading gauge*4 Power supply*5 Mobile control pendant
*1 Plafond encombré*2 Plafond plan*3 Gabarit d’encombrement du SNCF*4 Gaine d’alimentation électrique*5 Boîte de commande mobile
KR02
_32.
FMZweiträgerlaufkrane ZL
Double Girder Overhead Travelling Cranes ZLPonts roulants posés bipoutre ZL
09.02 2/29
2
3200
HW = 6,0 m V = 5/0,8 m/min
SH 3008-20 4/1 L22m
3,0/0,5 0,09/0,37 2x0,12/0,55 ...6,6...8,8
...11,0
...12,2
...13,2
...14,2
...15,0
2000 2522 300 -80-40020406080
610 700 200 190 385 19,921,823,825,126,227,528,5
5,46,58,09,110,111,312,2
5,05,56,06,36,66,97,1
0,81,31,92,32,62,93,1
5,47,810,813,115,017,519,6
...16,8
...17,8
...18,5
2500 3022 120170294
30,932,929,2
14,416,412,6
6,97,36,5
2,93,23,2
24,428,820,6
...20,1
...22,9
...23,5
3150 3672 348448548
31,734,837,8
15,018,021,0
6,26,87,4
2,83,43,5
26,032,940,1
2x0,31/1,25 ...25,8...28,7...30,0
4000 4596 340 508608710
40,644,650,9
23,727,633,9
6,97,68,7
3,13,53,7
35,244,259,6
4000
HW = 6,0 m V = 6,3/1 m/min
SH 4010-25 4/1 L22m
4,8/0,7 0,09/0,37 2x0,12/0,55 ...5,9...8,0
...10,1
...11,2
...12,4
...13,3
...14,3
...15,0
2000 2522 300 -80-40020406080
120
610 700 200 250 415 23,225,127,228,629,931,032,133,6
5,86,47,88,910,111,011,913,4
5,86,36,87,27,57,88,08,4
0,81,31,92,32,83,13,43,7
5,27,110,112,414,816,818,821,9
...16,0
...17,4
...17,7
...18,5
2500 3022 120170220348
34,436,738,234,8
14,116,317,814,2
7,78,28,57,8
3,33,73,83,8
23,528,632,024,1
...20,0
...22,83150 3672 348
44835,838,9
15,218,1
7,07,6
3,44,0
26,333,2
2x0,31/1,25 ...23,5 548 41,9 21,1 8,2 4,2 40,4...25,7...27,8...28,9...30,0
4000 4596 340 508608658808
44,748,052,055,8
23,827,031,034,7
7,68,28,99,5
3,74,14,34,6
35,542,852,361,9
5000
HW = 6,0 m V = 5/0,8 m/min
SH 4012-20 4/1 L22m
4,8/0,7 0,09/0,37 2x0,12/0,55 ...5,5...7,5...9,5
...10,6
...11,6
...12,6
...13,5
...15,0
2000 2522 300 -80-40020406080
120
610 700 200 250 415 27,329,331,532,734,135,236,338,4
6,26,78,08,89,910,811,713,6
6,87,37,98,28,58,89,19,6
0,71,32,02,42,83,23,64,3
4,86,79,711,513,815,817,821,9
...17,2
...18,52500 3022 170
34841,339,6
16,214,4
9,28,8
4,24,4
28,024,1
...18,9
...21,83150 3672 348
44839,943,0
14,617,5
7,88,4
3,64,4
24,631,4
2x0,31/1,25 ...23,5 548 46,8 21,2 9,2 5,0 40,4...24,8...27,3...28,9...30,0
4000 4596 340 508608658808
48,852,456,960,7
23,226,631,134,8
8,39,09,7
10,4
4,24,85,25,5
33,841,652,361,9
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L2 L5 L6 L8 L10 L11 L18 b O6R max R min Hs Hm Pu
[kg] [kW] (kW) [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/28. Dimensional sketches ↑ 2/28. Croquis dimensionaux ↑ 2/28.
KR02
_32.
FM
Zweiträgerlaufkrane ZLDouble Girder Overhead Travelling Cranes ZLPonts roulants posés bipoutre ZL
2/30 09.02
6300
HW = 6,0 m V = 6,3/1 m/min
SH 4016-25 4/1 L23m
7,6/1,1 0,09/0,37 2x0,12/0,55 ...5,0...6,8...8,7...9,8
...10,8
...11,6
...12,5
...14,2
...15,0
2000 2522 300 -80-40020406080
120170
610 700 200 250 415 32,935,037,138,639,840,741,944,345,9
7,47,38,19,19,910,511,413,414,9
8,28,89,39,7
10,010,210,511,111,5
0,71,21,92,42,83,23,74,65,1
5,06,59,011,213,114,516,521,124,4
2x0,31/1,25 ...16,0...16,7...17,7...18,5
2500 3022 170220348448
47,048,845,647,1
15,817,514,215,6
10,510,910,210,5
4,54,84,85,2
26,630,623,326,6
...20,4
...23,4
...23,5
3150 3672 448548648
48,553,454,6
16,821,422,6
9,510,510,7
4,75,96,0
29,440,843,9
...26,0
...28,4
...30,0
4000 4596 340 608658808
58,063,067,3
25,830,734,9
9,910,811,5
5,46,16,6
39,651,462,2
8000
HW = 6,0 m V = 6,3/1 m/min
SH 5020-25 4/1 L22m
9,5/1,5 0,12/0,55 2x0,12/0,55 ...6,2...8,0...9,0...9,9
...10,7
...11,6
2000 2522 300 -40020406080
705 855 200 275 600 43,045,647,148,449,450,6
9,09,49,910,611,111,9
10,811,411,812,112,412,7
1,22,02,53,03,43,9
7,510,111,913,815,317,3
2x0,31/1,25 ...13,2...14,7...15,0
120170348
52,955,153,2
13,615,413,3
13,313,813,3
4,95,95,7
21,425,721,4
...16,5
...17,02500 3022 348
44854,455,4
14,115,1
12,112,4
5,35,6
23,525,7
...18,5 3096 340 408 57,8 17,2 12,9 6,5 21,8
...19,1
...22,1
...23,5
3150 3746 408508608
58,162,865,4
17,421,724,1
11,412,312,8
5,46,87,5
22,331,236,5
...24,7
...27,1
...29,2
...30,0
4000 4596 608658710808
66,571,675,477,2
25,029,933,635,3
11,412,212,913,2
6,37,28,08,3
38,850,559,964,5
10000
HW = 6,0 m V = 5/0,8 m/min
SH 5025-20 4/1 L22m
9,5/1,5 0,12/0,55 2x0,12/0,55 ...5,7 2000 2522 300 -40 705 855 200 275 600 51,3 10,7 12,9 1,1 7,52x0,31/1,25 ...7,2
...8,2020
53,755,4
10,310,6
13,513,9
1,72,2
9,211,0
...9,0
...9,8...10,6...12,1...13,7...14,4...15,0
2596 340 0204080
130180308
57,858,959,962,164,766,663,7
12,212,613,114,416,317,914,8
14,514,715,015,616,216,716,0
2,93,43,84,96,16,86,5
9,510,611,714,418,221,316,1
...17,7
...18,52500 3096 408
50866,669,4
16,919,6
14,915,5
6,87,6
20,425,6
...20,5
...23,0
...23,5
3150 3746 508608658
71,174,877,6
20,924,226,9
14,014,715,2
6,98,38,8
28,636,042,2
...25,5
...27,54000 4596 658
71079,883,4
28,732,1
13,614,2
7,78,7
46,955,5
...29,2
...30,04786 445 703
80387,289,2
35,837,8
14,915,2
9,59,9
40,042,7
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L2 L5 L6 L8 L10 L11 L18 b O6R max R min Hs Hm Pu
[kg] [kW] (kW) [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/28. Dimensional sketches ↑ 2/28. Croquis dimensionaux ↑ 2/28.
KR02
_32.
FMZweiträgerlaufkrane ZL
Double Girder Overhead Travelling Cranes ZLPonts roulants posés bipoutre ZL
09.02 2/31
2
12500
HW = 6,0 m V = 6,3/1 m/min
SH 5032-25 4/1 L21Am
15,5/2,4 0,31/1,25 2x0,31/1,25 ...5,2...6,6...7,4...8,2...8,9...9,7
...11,1
...12,7
...13,1
...13,5
...15,0
2000 2596 340 -80-40-200204080
130180308408
830 1000 200 295 635 61,364,566,267,969,270,573,075,677,074,476,5
15,514,214,014,314,514,815,817,118,315,416,7
15,316,216,617,017,317,718,318,919,318,619,2
1,11,72,12,63,13,64,65,96,46,07,3
5,77,07,99,310,411,514,217,519,815,018,0
...16,1
...18,52500 3096 408
50877,581,7
17,220,5
17,318,2
6,58,4
19,326,4
...19,1 3150 3746 508 82,3 20,9 16,2 7,0 27,4
...21,5
...23,53936 445 503
55386,991,4
24,828,9
17,117,9
8,710,2
24,830,1
...23,9
...25,9
...27,5
...29,1
...30,0
4000 4786 553605703803853
91,995,698,0100,8106,1
29,332,734,837,442,6
15,716,316,717,218,1
8,29,3
10,211,111,8
30,735,238,241,848,9
16000
HW = 6,0 m V = 5/0,8 m/min
SH 6040-20 4/1 L23m
15,5/2,4 0,31/1,25 2x0,31/1,25 ...6,0...6,8
2000 2596 340 -40-20
870 1200 200 545 704 81,283,4
18,317,6
20,320,9
1,82,3
9,110,2
...7,5
...8,1
...8,8...10,0...11,4...12,0...14,5...17,0...18,5
2500 3286 445 -105-85-65-252575
212312412
86,588,089,592,194,796,698,2102,0105,6
18,518,518,518,919,820,920,322,525,4
19,319,620,020,521,121,621,922,823,6
2,42,83,24,15,15,77,39,5
11,2
10,911,712,514,216,117,818,422,025,9
...19,7
...22,9
...23,5
3150 3936 412510610
107,1113,9116,0
26,432,134,0
21,022,422,8
9,712,613,2
27,435,438,0
...25,3
...27,2
...29,6
...30,0
4000 4910 610710808808
118,2121,7128,9132,4
35,838,845,649,1
20,220,822,022,6
11,512,914,815,3
40,745,054,759,6
20000
HW = 6,0 m V = 4/,06 m/min
SH 6050-16 4/1 L12m
15,5/2,4 0,31/1,25 2x0,31/1,25 ...5,5...6,2...6,9...7,4...8,1
2500 3286 445 -145-125-105-85-65
870 1200 200 545 704 97,8100,5102,8104,2106,1
23,722,521,721,320,9
21,822,422,923,323,7
1,41,82,22,52,9
9,19,910,711,212,0
...9,2...10,2...11,0...13,4
-252575
212
109,0111,5113,4115,7
21,021,522,121,3
24,324,925,325,8
3,84,65,36,9
13,615,316,717,6
2x0,49/2,0 ...15,6...18,2...18,5
312412510
119,2124,3127,4
22,826,229,1
26,627,728,4
9,011,912,8
20,525,629,3
...21,4
...23,53150 3936 510
610131,1135,2
31,434,8
25,726,5
12,614,7
33,138,0
2x0,40/1,6 ...25,5...28,0...29,2...30,0
4000 4910 520 635733733833
140,8147,9152,5155,9
39,746,150,553,6
24,125,326,126,6
13,515,817,017,9
45,054,360,765,4
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L2 L5 L6 L8 L10 L11 L18 b O6R max R min Hs Hm Pu
[kg] [kW] (kW) [kW] [m] [mm] [kN]
Maßskizzen ↑ 2/28. Dimensional sketches ↑ 2/28. Croquis dimensionaux ↑ 2/28.
KR02
_32.
FM
Zweiträgerlaufkrane ZLDouble Girder Overhead Travelling Cranes ZLPonts roulants posés bipoutre ZL
2/32 09.02
25000
HW = 6,0 m V = 3,1/0,5 m/min
SH 6063-12 4/1 L11Am
15,5/2,4 0,49/2,0 2x0,49/2,0 ...5,6...6,2...6,6...7,1
2500 3286 445 -125-105-85-65
870 1200 200 545 704 119,8122,3123,9125,6
27,726,225,624,9
26,727,327,728,0
1,51,92,12,4
9,610,110,711,2
...7,9
...8,8
...9,7...10,1...11,5
-252575
125212
128,5131,3134,0135,3136,2
24,524,224,524,722,8
28,729,329,930,230,4
3,03,74,65,05,7
12,513,915,616,415,8
2x0,40/1,6 ...13,4...16,1...19,4...21,7...22,8...23,5
3150 4060 520 237337435535635733
141,8147,3154,5158,6161,2165,3
25,728,233,035,937,841,7
27,828,930,331,131,632,4
6,48,8
12,314,816,117,5
20,825,633,137,740,746,0
...24,1
...27,44000 4910 733
733166,4174,0
42,649,0
28,429,7
14,317,6
47,457,1
2x0,63/2,5 ...28,9...30,0
833883
178,2180,4
52,854,6
30,530,8
19,320,3
62,865,7
32000
HW = 7,0 m V = 5/0,75 m/min
AS 7080-20 4/1 L12m
30,0/4,6 0,40/1,6 2x0,40/1,6 ...5,2...5,6...6,2
3150 4060 530 -160-140-100
1120 1120 200 710 890 146,6149,8154,1
46,944,842,4
28,829,430,3
1,31,51,9
15,616,117,3
...6,9
...7,7
...8,1
...8,5...10,7...12,8...14,9
-50050
100145145245
158,3162,5164,6166,9172,4179,2184,3
40,238,537,938,134,134,835,7
31,131,932,332,833,835,236,2
2,43,03,33,75,37,49,6
18,419,920,822,323,227,831,5
2x0,63/2,5 ...17,5...19,0
345445
191,3195,2
38,740,8
37,538,3
12,914,9
38,042,0
...21,1
...23,1
...23,5
4200 635 440540540
300 201,7206,5210,4
45,348,552,1
19,720,220,5
18,121,022,2
29,232,936,4
...25,7
...27,9
...30,0
4000 4910 540640740
214,4220,2228,7
54,659,366,8
19,119,620,4
19,922,725,9
39,544,752,9
40000
HW = 7,0 m V = 4/0,63 m/min
AS 7100-16 4/1 L11Am
30,0/4,6 0,63/2,5 2x0,40/1,6 ...5,0...5,8...6,4...6,8...7,2
3150 4060 530 -100-50050
100
1120 1120 200 710 890 176,6184,2189,1192,1195,3
57,952,349,447,947,2
34,736,237,137,738,3
1,31,82,22,52,9
16,117,318,419,320,8
...11,1
...12,3
...14,3
...16,5
...18,3
4200 635 4040
140240340
300 211,3216,2221,9228,4233,1
39,740,340,642,644,4
20,621,121,722,322,8
6,27,69,9
12,915,4
14,316,418,722,225,0
2x0,63/2,5 ...20,4...23,9...26,0
440540640
238,2249,2255,0
46,854,358,5
23,324,324,9
18,524,828,7
28,336,941,7
...28,1
...30,04000 5050 740
840263,4269,0
65,670,0
23,524,0
26,229,1
49,554,7
50000
HW = 7,0 m V = 3,2/0,5 m/min
AS 7125-12 4/1 L11Bm
30,0/4,6 0,63/2,5 2x0,63/2,5 ...5,4...5,8...6,1
...10,2
...11,2
...13,1
3150 4200 635 -105-55-54040
140
1175 1175 300 610 980 221,8226,6230,2253,7258,9265,8
70,767,465,847,847,646,2
21,722,122,524,825,326,0
1,72,02,35,77,09,3
11,211,712,414,516,418,5
...15,1
...16,8
...18,7
...20,6
...22,1
240340440540540
272,9278,0283,4288,7295,8
47,148,049,651,856,7
26,727,127,728,228,9
12,114,617,721,024,6
21,824,427,430,836,4
...30,0 Auf Anfrage / On request / Sur demande
↑ Seite 2/2 page 2/2
5/20 m/min
10/40 m/min
L L2 L5 L6 L8 L10 L11 L18 b O6R max R min Hs Hm Pu
[kg] [kW] (kW) [kW] [m] [mm] [kN]
Spurkranzlose Laufrollen und Führungs-rollen.Maßskizzen ↑ 2/28.
Wheels without flanges and guide rollers.
Dimensional sketches ↑ 2/28.
Galets de roulement sans boudins et galets de guidage.Croquis dimensionaux ↑ 2/28.
KR02
_32.
FMPlanung und AngebotPlanning and QuotationProject et offre
Hänge- und LaufkraneSuspension Cranes/Overhead Travelling CranesPonts roulants suspendus/Ponts roulants posés
09.02 2/33
2
Wir helfen Ihnen gerne, den für Ihren Bedarf richtigen Kran aus-zulegen - wir beraten Sie kosten-los!
Geben Sie uns einfach einen Überblick über Ihre Vorstellungen und örtlichen Gegebenheiten.Kopieren Sie die nachstehenden Seiten und faxen Sie diese an uns - wir antworten sofort!
Unsere Spezialisten, ganz in Ihrer Nähe, kommen aber auch gerne zu Ihnen und beraten Sie vor Ort!
We will be pleased to help you find the right crane for your requirements - consultations are free of charge!
Simply give us an outline of your requirements and structural features. Just copy the following pages and fax them to us - we will reply by return!
Alternatively our specialists in you area will be happy to visit you, and advise you on the spot!
Nous vous aiderons bien volontiers à déterminer le pont roulant qui convient à vos besoins - nous vous conseillerons à titre gracieux!
Donnez-nous simplement un aperçu de vos conceptions, ainsi que des dispositions locales existantes. Photocopiez les pages suivantes et faxez-les nous. Nous répondrons par retour!A votre écoute, nos spécialistes viendront volontiers chez vous pour vous conseiller sur place!
KR02
_32.
FM
Hänge- und LaufkraneSuspension Cranes/Overhead Travelling CranesPonts roulants suspendus/Ponts roulants posés
Planung und AngebotPlanning and Quotation
Project et offre
2/34 09.02
EH
Kopieren - Ausfüllen - Faxen Copy - Fill in - Fax Copier - Remplir - Faxer
Kran und Hubwerk
Hubgeschwindigkeiten
Katzfahrgeschwindigkeiten
Kranfahrgeschwindigkeiten
Kranbahn
wird bauseits gestellt
mit anbieten
Kranbahnlänge
Laufbahnprofil
Aufhängeabstand
Wir bitten um:
Beratungsbesuch
Angebot
Rückruf
Crane and hoist
Hoisting speeds
Cross travel speeds
Long travel speeds
Crane runway
will be supplied by others
please include in quote
Runway length
Runway profile
Spacing of suspension
We request:
Consultation visit
Quotation
Telephone consultation
Pont roulant et palan
Vitesses de levage
Vitesses de direction
Vitesses de translation
Chemin de roulement
sera installé par ailleurs
à proposer
Longueur du chemin de roulement
Profil du chemin de roulement
Distance entre les points d'appui
ou d'accrochage
Nous souhaitons recevoir:
La visite d'un technicien-conseil
Votre offre
Votre appel téléphonique
................................................. m/min
................................................. m/min
................................................. m/min
�
�
......................................................mm
H x B ............................................ mm
......................................................mm
�
�
�
AnschriftAddressAdresseTel. / Fax
.................................................................................................................................................................
.................................................................................................................................................................
.................................................................................................................................................................
.................................................................................................................................................................
KR02
_32.
FMPlanung und AngebotPlanning and QuotationProject et offre
Hänge- und LaufkraneSuspension Cranes/Overhead Travelling CranesPonts roulants suspendus/Ponts roulants posés
09.02 2/35
2
Kopieren - Ausfüllen - Faxen Copy - Fill in - Fax Copier - Remplir - Faxer
EL-A
Kran und Hubwerk
Hubgeschwindigkeiten
Katzfahrgeschwindigkeiten
Kranfahrgeschwindigkeiten
mit Seitenbühne (ZL-A)
Kranbahn
wird bauseits gestellt
mit anbieten
Kranbahnlänge
Stützabstand
Kranbahnschiene (HxB)
Wir bitten um:
Beratungsbesuch
Angebot
Rückruf
Crane and hoist
Hoisting speeds
Cross travel speeds
Long travel speeds
with side platform (ZL-A)
Crane runway
will be supplied by others
please include in quote
Runway length
Spacing of supports
Crane rail (HxB)
We request:
Consultation visit
Quotation
Telephone consultation
Pont roulant et palan
Vitesses de levage
Vitesses de direction
Vitesses de translation
avec passerelle latérale (ZL-A)
Chemin de roulement
sera installé par ailleurs
à proposer
Longueur du chemin de roulement
Distance entre les points d'appui
Rail de roulement (HxB)
Nous souhaitons recevoir:
La visite d'un technicien-conseil
Votre offre
Votre appel téléphonique
................................................. m/min
................................................. m/min
................................................. m/min
�
�
�
......................................................mm
......................................................mm
......................................................mm
�
�
�
AnschriftAddressAdresseTel. / Fax
.................................................................................................................................................................
.................................................................................................................................................................
.................................................................................................................................................................
.................................................................................................................................................................
EL-B
EL-C
ZL-A
KR02
_32.
FM
Hänge- und LaufkraneSuspension Cranes/Overhead Travelling CranesPonts roulants suspendus/Ponts roulants posés
Planung und AngebotPlanning and Quotation
Project et offre
2/36 09.02