H135-155FT SERIES...• Kubota diesel engines feature 500 hour service intervals. • Extended transmission and hydraulic fluid change intervals. • Improved engine options provide

H135-155FT SERIESSIT-DOWN, COUNTERBALANCED, ICE, PNEUMATIC TIRE

WWW.HYSTER.COM

2

H135-155FT SERIES

POWER TO HANDLE TOUGH APPLICATIONSThe Hyster® H135-155FT series represents a transformation in how lift trucks are designed, built and acquired. Drawing on the Hyster legacy of strength, durability and toughness, the Fortis® concept simplifies lift truck purchases with a series of engine-transmission bundles. Buying a Fortis® means you maximize your purchasing power by buying only the features you need for your application. Using a truck from the H135-155FT series allows for low cost of operations, dependability and owning a unit that’s still going strong long after the day’s work is done.

The H135-155FT series is configured to provide the right lift truck for your application. Multiple powertrain combinations are available to choose from to assure your cost of operations will be lowered. Each configuration helps assure improved efficiency, advanced dependability and simple serviceability.

3

4

ADVANCED DEPENDABILITY

INDUSTRIAL STRENGTH ELECTRONICS• CANbus communications network reduces wiring complexity, providing superior

dependability.

• Non-mechanical, Hall-Effect sensors and switches are designed to outlast the life of the truck.

• Proven tough, Pacesetter VSM industrial onboard computer manages truck operation to maintain world-class dependability to maximize uptime.

• IP66 sealed electrical connectors keep out water and debris, so you can powerwash our trucks.

• Smart, one-way routing path for wire harnesses ensures consistent high-quality assembly while increasing durability and simplifying maintenance when needed.

Approximately 70% of industrial lift truck downtime results from problems with the powertrain, brakes, electrical system, cooling system or hydraulic system. With the H135-155FT series, many of these mechanical issues become a thing of the past as design advances have reduced downtime by up to 30%.

CARRIAGE-MOUNTED SIDE SHIFTING FORK POSITIONERIn addition to the carriage mounted sideshift, the optional carriage-mounted side shifting fork positioner (SSFP) is useful within industries that require handling a variety of load sizes. Available with all masts, the SSFP is a solution for applications that require frequent stops to reposition fork width. With this option, the operator can quickly and accurately sideshift the forks, as well as move the forks (simultaneously) inward or outward to handle a variety of pallet configurations. An integral load backrest is included with the attachment.

PROTECTED POWERTRAIN• Pacesetter VSM™ industrial onboard computer monitors and protects the engine

powertrain to maximize the H135-155FT series uptime.

• Transmission gears and shafts are up to 15% stronger to handle even the most demanding duty cycle.

• Electronically controlled powershift transmissions have state-of-the-art clutch packs that are stronger and larger and provide up to 3 times the life.

• Standard wet disc brakes provide excellent stopping power and extremely long service life. Brakes are completely sealed from water and dirt making them ready for tough environments.

5

Counterweight tunnel design

COOLING TECHNOLOGY• Standard combi-cooler radiator provides 4-row aluminum

core for additional transmission oil cooling capacity for the most demanding and intensive applications.

• Soft rubber isolator mounted radiators increase reliability and durability to significantly extend service life.

• A superior counterweight tunnel design coupled with a “pusher” type fan and enhanced shroud design improves airflow and significantly reduces the recirculation of hot air to maximize cooling capabilities.

• Radiators for diesel engines feature air to air intercooler technology for additional engine power and efficiency.

Diesel radiator features air to air intercooler technology

6

LOW COST OF OWNERSHIP

WORLD-CLASS EFFICIENCY• Hyster® Variable Power Technology™, available on the PSI 4.3L engine or the Kubota 3.8L high

output turbo diesel engine, provides adjustable performance modes that allow customers to boost productivity or fuel economy to fit their specific application requirements.

• Auto Deceleration System extends brake life by up to 60% by automatically slowing the truck when the accelerator pedal is released. (DuraMatch™)

• Controlled power reversal feature reduces tire spin, increasing tire life by up to 50%. This feature is programmable to match the needs from delicate to more aggressive settings for maximum productivity. (DuraMatch™)

• TouchPoint electronic hydraulic control (optional) valve precisely manages hydraulic pressure and flow to supply exactly the right amount of power for each function, reducing fuel consumption.

• Kubota diesel engines feature 500 hour service intervals.

• Extended transmission and hydraulic fluid change intervals.

• Improved engine options provide excellent performance with advanced combustion technology that enhances fuel economy.

ADVANCED DEPENDABILITY• Electronic controlled transmissions reduce shock loading;

clutch packs with 3 times the life; 15% stronger gears and shafts; and Hyster® oil-cooled wet disc brakes all work to provide unmatched reliability.

• CANbus communications, non-mechanical sensors and switches and IP66 rated sealed connections mean electrical problems are a thing of the past.

• The H135-155FT series’ superior airflow and heavy duty cooling systems keep heat in check, while providing world-class dependability in even the harshest of environments.

• Hassle-free hydraulics: Leak-free O-ring face seal fittings at all high pressure connection points, superior filtration (10 micron) system and smart placement of valve and lines take the worry out of hydraulics.

Lowering operating costs in all types of applications is what the Fortis® series does best. With up to a 30% decrease in downtime, the H135-155FT series is an exceptionally smart choice. The series features two truck packages with multiple powertrain configurations that provide improved efficiency, while enhancing reliability and superior serviceability to reduce your operating costs.

7

SUPPORTING CUSTOMERS WITH WORLD-CLASS PARTS & SERVICEFour Parts Distribution Centers strategically located around the world provide a full range of original equipment and aftermarket parts that help maintain our customers’ uptime. In fact, our Guaranteed Availability Program ensures that parts that are normally required in the first 2 years of operation will be available from your Hyster® parts dealer within 24 hours or they are free.* We also take that commitment into the field with the Hyster CERTECH® Certification training program. This technical training program provides both systems level as well as product-specific education to ensure lift trucks are repaired right the first time.

* Contact your local dealer for program details.

SUPERIOR SERVICEABILITY• Pacesetter VSM continuously monitors fluid levels and powertrain, reducing daily service checks

and preventing major repairs.

• Unmatched service access: Gull-wing hood door design offers superior service access to the engine compartment.

• Daily checks are easily accessed and performed.

• State-of-the-art onboard diagnostics reduce repair time and minimize expensive parts swapping.

• Standard oil-cooled wet disc brakes significantly decrease brake maintenance.

• Kubota 3.8L DOC engine provides maintenance-free emissions—no need to add fluids or remove filters for cleaning.

Easy service access

DOWNTIME IS COSTLYEstimated Costs per Downtime Event:

Repair Costs (parts & labor) $ 500

Idle Operator Costs + $ 60

Truck Rental Costs + $ 120

Administrative Costs + $ 50

TOTAL COST (per Downtime Event) $ 730

Additional Costs: + $ xxx

Lost Productivity and Sales $ ???

Assumptions:1. Operator Cost = $15.00/hr.2. Average Length of Downtime Event = 4 hrs.

8

EXCEPTIONAL ERGONOMICS

Extensive operator testing has resulted in a design of lif t trucks that are easier and more comfortable to operate than the leading competitors. The Hyster Fortis® series reduces operator fatigue and increases productivity through superior operator comfort, precise handling, and easy entry and exit. For the Hyster® H135-155FT lif t truck owner, this means significant savings in operating costs and productivity improvements.

PRECISE OPERATION• Improved brake pedal layout and the reduced braking

requirements of the Auto Deceleration System are designed to reduce operator fatigue. (DuraMatch™)

• 12-inch steering wheel with spinner knob improves steering response, increasing control and efficiency while minimizing shoulder strain with only 4 turns lock-to-lock.

SUPERIOR OPERATOR COMFORT• Low noise level at the operator’s ear lessens driver fatigue,

improving driver satisfaction for an overall increase in productivity.

• Isolated drivetrain minimizes the effect of powertrain vibration and road-borne shocks to increase operator comfort all shift long.

• Rear drive handle mounted on overhead guard leg (optional) provides an excellent hand hold for reverse driving while giving ready access to the auxiliary horn button for use when approaching cross-aisles and pedestrian traffic areas.

• An adjustable steer column and optional full suspension swivel seat assures the right fit for any operator.

• Easy-to-use 3-point entry design of operator compartment uses a large molded hand grip and open non-slip steps with a low step height to minimize muscle/joint strain during entry/exit.

• Adjustable armrest that accompanies the optional TouchPoint E-hydraulic control moves with the seat and telescopes forward/vertical in one simple movement to provide greater flexibility in achieving a more custom position.

• Choice of 5 different seats enables a more customizable level of operator comfort by its enhanced design and adjustable features.

• Increased shoulder clearance – a result of the redesigned overhead guard and more floor space – gives operators greater foot room.

9

PERFORMANCE AT-A-GLANCE• Advanced dash display uses a non-reflective, backlit LCD screen

and 21 indicator lights provide performance at-a-glance in all lighting conditions.

• Easy-to-use onboard diagnostics through the advanced dash display provide fast and accurate troubleshooting for first-time fixes.

• Optional premium monitoring package reports air and hydraulic oil filter restrictions and low engine coolant levels.

OPERATOR CABAn optional factory installed cab offers additional comfort for the operator. Offered with or without air conditioning, the cab also includes:

• sound insulation• integrated heater/defogger • front and rear wiper/washers • removable doors with sliding windows• interior light• air circulating fan and insulating headliner• full LED light package

10

ENHANCED PRODUCTIVITY

HYSTER® VARIABLE POWER TECHNOLOGY™Available on the PSI 4.3L engine and the Kubota 3.8L high output turbo diesel engine, Hyster® Variable Power Technology™ provides adjustable performance modes that allow customers to maximize productivity or fuel economy to fit their specific application requirements. With selectable performance modes, the H135-155FT series can be tailored to achieve a balance of enhanced performance and superior fuel economy, or to boost productivity during peak business periods when moving more loads is integral to the success of your operation.

CUSTOMIZED PERFORMANCE• Superior ergonomic features like more foot and leg room, 2 choices of hydraulic controls, adjustable steer

column, integrated dashboard display, 12-inch steering wheel with spinner knob, Auto Deceleration System, 5 choices of seats and the rear drive handle enable your operator to maximize productivity.

• H135-155FT series choice of high output engines, performance transmissions, hydraulic controls and cooling system options allows you to customize your truck to optimize the productivity in your application.

• Three different engine choices provide a range of options for fuel efficiency, productivity and maintenance-free diesel emissions customized to your application.

• Pacesetter VSM™ industrial onboard computer enables you to adjust and optimize the performance of your H135-155FT trucks.

• Patented DuraMatch™ transmission provides breakthrough features that include the Auto Deceleration System, controlled rollback on ramps, controlled power reversals to move loads more efficiently with less operator fatigue and product damage.

• With the exceptional cooling and its ability for extended drawbar pull, the H135-155FT series will continue to perform when other lift trucks may fail.

KUBOTA DIESEL ENGINESTrucks equipped with the Kubota 3.8L high output and Kubota 3.8L DOC turbo diesel engines will deliver top notch productivity and help to decrease the operating cost per load moved. Designed and built for extreme durability with minimal service requirements, operators will enjoy operating the truck with low vibration and engine noise levels.

• 500 hour service intervals

• Deep skirt engine block

• Gear driven engine timing

• Cast iron block and cylinder head

• 74 horsepower (Kubota 3.8L DOC only)

• 105 horsepower (Kubota 3.8L high output only)

• 13 quart oil pan with oil cooler

• 80 amp alternator

• Hyster® Variable Power Technology™ (Kubota 3.8L high output only)

• Tier 4 Final compliant, utilizing cooled EGR, SCR and DPF technologies (Kubota 3.8L high output only)

• Tier 4 Final compliant, utilizing cooled EGR and DOC technologies (Kubota 3.8L DOC only)

PSI 4.3L engine

High output Kubota 3.8L turbo diesel engine

11

WHICH ENGINE IS RIGHT FOR YOUR APPLICATION?

PSI 4.3L V6 LPG 96@2400 RPM

210@2400 RPM • 250 • • • • •

Kubota 3.8L High Output Diesel 105@

2400 RPM275@

1600 RPM • 500 • • • • • • • • • •

Kubota 3.8L DOC Diesel 74@

2200 RPM227@

1400 RPM • 500 • • • • • • • • •

Engi

ne Ty

pe

Fuel

Type

Hors

epow

er

Torq

ue

EPA

Emis

sion

s Co

mpl

iant

Serv

ice

inte

rval

sHy

ster

® V

aria

ble

Pow

er T

echn

olog

y™

Mai

nten

ance

-free

em

issi

ons

Cast

iron

blo

ck a

nd c

ylin

der h

eads

Deep

ski

rt en

gine

blo

ckTu

rbo

char

ged

Air t

o ai

r int

erco

oler

Repl

acea

ble

inta

ke v

alve

sea

t ins

erts

Repl

acea

ble

exha

ust v

alve

sea

t ins

erts

4-va

lves

per

cyl

inde

rDi

esel

oxi

datio

n ca

taly

stDi

esel

par

ticul

ate

filte

rSe

lect

ive

Cata

lytic

Red

uctio

n (S

CR) s

yste

m

12

Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Di-mensions are in inches (millimeters).

ITRINSIDE TURNING RADIUS

FOR 90° STACKING AISLE, ADD OUTSIDETURNING RADIUS (19), PLUS DIMENSION (22)

PLUS LOAD LENGTH.

EQUAL INTERSECTIONS RIGHT ANGLE AISLE WIDTH

1515

HEAD CLEARANCEWHEN SEAT IS IN

DEPRESSED POSITION(see chart)

17

22

19

19

10

18

11

11

22

35

16

38

E

X

C

T D

20

Opt.

Tow Pin18.7” (476)

63”(1601)

7

STANDARD LIFT SPECIFICATIONSMaximum Fork Height (TOF) †

Overall Lowered Height

Overall Extended Height w/ Load Backrest

Overall Extended Height w/o Load Backrest

Free-Lift (TOF) w/Load Backrest

Free-Lift (TOF)w/o Load Backrest

in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)

2-STAGE LIMITED FREE-LIFT (LFL) VISTA™ MAST118 (3000) 100 (2540) 172 (4354) 166 (4195) 6 (160) 6 (160)

133 (3400) 108 (2740) 188 (4754) 181 (4595) 6 (160) 6 (160)

173 (4400) 128 (3240) 227 (5754) 221 (5595) 6 (160) 6 (160)

212 (5400) 148 (3740) 266 (6754) 260 (6595) 6 (160) 6 (160)

3-STAGE FULL FREE-LIFT (FFL) VISTA™ MAST185 (4700) 102 (2570) 239 (6054) 230 (5830) 47 (1216) 56 (1440)

220 (5600) 113 (2870) 274 (6954) 265 (6730) 59 (1516) 68 (1740)

244 (6200) 123 (3120) 298 (7554) 289 (7330) 69 (1766) 78 (1990)

† Lift heights over 212” (5400 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.

ITRINSIDE TURNING RADIUS

FOR 90° STACKING AISLE, ADD OUTSIDETURNING RADIUS (19), PLUS DIMENSION (22)

PLUS LOAD LENGTH.

EQUAL INTERSECTIONS RIGHT ANGLE AISLE WIDTH

1515

HEAD CLEARANCEWHEN SEAT IS IN

DEPRESSED POSITION(see chart)

17

22

19

19

10

18

11

11

22

35

16

38

E

X

C

T D

20

Opt.

Tow Pin18.7” (476)

63”(1601)

7

Seat Type Standard OHG* Optional Cab*

Non-Suspension 38.2 (971.2) 38.2 (971.2)

Full-Suspension 38.0 (965.2) 38.0 (965.2)

Swivel Full-Suspension 38.0 (965.2) 38.0 (965.2)

Seat in depressed position*

TRUCK MODEL

C D E T Xin. (mm) percent degrees in. (mm) in. (mm)

H135-155FT 23.6 (600) 42% 25 6.9 (177) 33.2 (844)

H135-155FT DIMENSIONS

13

CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certifica-tion of compliance with the applicable ANSI standards appears on the lift truck.† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.†† Limited by traction. For further information on this dimension, please contact your local Hyster dealer.

GEN

ERA

L

1 Manufacturer Hyster Hyster2 Model H135FT H155FT

Engine PSI 4.3L Kubota 3.8L DOC Kubota 3.8L High Output PSI 4.3L Kubota 3.8L DOC Kubota 3.8L High Output3 Rated Capacity lb (kg) 13,500 (6,000) 15,500 (7,000)4 Load Center, Distance in (mm) 24 (610) 24 (610)5 Engine/Power Type - Gasoline, LPG, Diesel LPG Diesel LPG Diesel6 Operator Type Seated Rider Seated Rider7 Step Height in (mm) 12.6 (321) 12.6 (321)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic

9a Wheels, Number - Front/Rear (X = driven) 4X/2 4X/29b Track Width, Front / Rear in (mm) 72.7 (1846) / 60.5 (1535) 72.7 (1846) / 60.5 (1535)

DIM

ENSI

ON

S

10 Lift Height, w/LBR (TOF) (Rounded Down) in (mm) 212 (5400) 212 (5400)11a Std Free Lift Height (TOF) (Rounded Down) in (mm) 6 (160) 6 (160)11b Opt Full Free Lift w/ LBR (TOF) (Rounded Down) in (mm) 95 (2416) 95 (2416)11c Opt Full Free Lift w/o LBR (TOF) (Rounded Down) in (mm) 103 (2640) 103 (2640)12 Standard Carriage Width in (mm) 78 (1981) 78 (1981)13 Standard Forks, Thickness x Width x Length in (mm) 6 x 2.5 x 48 (150 x 60 x 1219) 6 x 2.5 x 48 (150 x 60 x 1219)

14a Standard Fork Spread, Min Inside Dimensions in (mm) 6.3 (160) 6.3 (160)14b Standard Fork Spread, Max Outside Dimensions in (mm) 73.9 (1876) 73.9 (1876)15 Mast Tilt, Forward/Backward degrees 5 / 10 5 / 1016 Overall Length (to Face of Forks) in (mm) 141.9 (3604) 144.4 (3669)17 Overall Width in (mm) 82.0 (2082) 82.0 (2082)18 Height, Std Mast - Lowered in (mm) 148 (3740) 148 (3740)

19a Height, Std Mast - Extended w/o LBR (Rounded Up) in (mm) 260 (6595) 260 (6595)19b Height, Std Mast - Extended w/ LBR (Rounded Up) in (mm) 266 (6754) 266 (6754)20a Height, Std Overhead Guard (High) (Rounded Up) in (mm) 100 (2531) 100 (2531)20b Height, Std Overhead Guard (Cab) (Rounded Up) in (mm) 101 (2549) 101 (2549)21a Turning Radius, Minimum Outside (OTR) in (mm) 130.7 (3320) 133.4 (3388)21b Turning Radius, Minimum Inside (ITR) in (mm) 9.1 (230) 9.1 (230)22 Length, Center of Wheels to Face of Forks in (mm) 23.7 (601) 23.7 (601)

23a Aisle Width, Rt Angle Stack (pallet w=42in, L=48in) in (mm) 202.4 (5140) 205.0 (5207)23a Aisle Width, Rt Angle Stack (Add Length of Load) in (mm) 154.4 (3921) 157.0 (3988)24 Equal Aisle, 90-Degree Intersecting Aisle in (mm) 111.6 (2835) 111.8 (2865)

PERF

ORM

AN

CE

25a Travel Spd Fwd, RL/NL w/2-spd (Fwd) Transmission mph (km/h) 13.7/13.8 (22/22.1) 12.6/12.7 (20.2/20.5) 13.6/13.8 (21.9/22.1) 12.5/12.7 (20.2/20.4)25b Travel Spd Fwd, RL/NL w/3-spd (Fwd) Transmission mph (km/h) 15.4/15.7 (24.9/25.2) 13.7/13.8 (22/22.2) 15.4/15.6 (24.7/25.1) 13.6/13.8 (21.8/22.1)25c Travel Spd Rev, RL/NL w/either Transmission mph (km/h) 13.7/13.8 (22/22.1) 12.6/12.7 (20.2/20.5) 13.6/13.8 (21.9/22.1) 12.5/12.7 (20.2/20.4)26a Lift Speed, Standard 2-Stage LFL RL/NL ft/min (m/s) 104/106 (.53/.54) 94/96 (.48/.49) 104/106 (.53/.54) 87/96 (.44/.49) 94/96 (.48/.49)26b Lift Speed, Optional 3-Stage FFL RL/NL ft/min (m/s) 100/102 (.51/.52) 93/93 (.47/.47) 100/102 (.51/.52) 85/93 (.43/.47) 93/93 (.47/.47)27a Lowering Speed, Standard 2-Stage LFL RL/NL ft/min (m/s) 114/104 (.58/.53) 114/104 (.58/.53)27b Lowering Speed, Optional 3-Stage FFL RL/NL ft/min (m/s) 104/81 (.53/.41) 104/81 (.53/.41)28a 2-Spd Xmsn Drawbar Pull @ Maximum RL/NL lb (kg) 9514/5674 (4315/2574) 10000/5674 (4536/2574) 10500/5674 (4763/2574) 9452/5952 (4536/2700) 10000/5952 (4536/2700) 11500/5952 (5216/2700)28b 2-Spd Xmsn Drawbar Pull @ 1 mph RL/NL lb (kg) 7773/5674 (3526/2574) 8557/5674 (3881/2574) 10500/5674 (4763/2574) 7713/5952 (3498/2700) 8474/5952 (3844/2700) 10500/5952 (4763/2700)28c 2-Spd Xmsn Drawbar Pull @ 3 mph RL/NL lb (kg) 4940/5674 (2241/2574) 4979/5674 (2258/2574) 7334/5674 (3327/2574) 4874/5952 (2211/2700) 4914/5952 (2229/2700) 7281/5952 (3303/2700)29a 2-Spd Xmsn Minimum Gradeability RL/NL % 30/17 32/17 37/17 27/17 29/17 33/1729b 2-Spd Xmsn Gradeability @ 1 mph RL/NL % 24/17 27/17 33/17 22/17 24/17 30/1729c 2-Spd Xmsn Gradeability @ 3 mph RL/NL % 15/17 23/17 14/17 20/1728a 3-Spd Xmsn Drawbar Pull @ Maximum RL/NL lb (kg) 10000/5674 (4536/2574) 10000/5674 (4536/2574) 11500/5674 (5216/2574) 10000/5952 (591/2700) 10000/5952 (455/2700) 11500/5952 (742/2700)28b 3-Spd Xmsn Drawbar Pull @ 1 mph RL/NL lb (kg) 10000/5674 (4536/2574) 10000/5674 (4536/2574) 11500/5674 (5216/2574) 10000/5952 (4536/2700) 10000/5952 (4536/2700) 11500/5952 (5216/2700)28c 3-Spd Xmsn Drawbar Pull @ 3 mph RL/NL lb (kg) 6309/5674 (2862/2574) 5268/5674 (2389/2574) 7366/5674 (3341/2574) 6248/5952 (2834/2700) 5221/5952 (2368/2700) 7307/5952 (3315/2700)29a 3-Spd Xmsn Minimum Gradeability RL/NL % 32/17 37/17 29/17 33/1729b 3-Spd Xmsn Gradeability @ 1 mph RL/NL % 32/17 37/17 29/17 33/1729c 3-Spd Xmsn Gradeability @ 3 mph RL/NL % 19/17 16/17 23/17 17/17 15/17 21/17

WT.

30a Weight, Standard Truck NL lb (kg) 19660 (8918) 19770 (8968) 20792 (9431) 20902 (9481)30b Weight, Standard Truck RL lb (kg) 33161 (15042) 33271 (15092) 36293 (16462) 36403 (16512)31a Axle Loading, Static Front/Rear NL lb (kg) 9457/10203 (4290/4628) 9512/10258 (4315/4653) 9160/11632 (4155/5276) 9215/11687 (4180/5301)31b Axle Loading, Static Front/Rear RL lb (kg) 30268/2893 (13729/1312) 30323/2948 (13754/1337) 33051/3239 (14992/1469) 33106/3294 (15017/1494)

TIRE

S &

WH

EELS 32 Tire Size, Front / Rear 8.25 X 15 14PR / 8.25 X 15 14PR 8.25 X 15 14PR / 8.25 X 15 14PR

34 Wheelbase in (mm) 88.0 (2235) 88.0 (2235)35 Ground Clearance Under Mast, RL in (mm) 5.7 (146) 5.7 (146)36 Ground Clearance, Center of Wheelbase in (mm) 10.0 (253) 10.0 (253)37 Service Brake - Method of Control/Operation Foot / Hydraulic Foot / Hydraulic38 Park Brake - Method of Control/Operation Hand / Mechanical Hand / Mechanical

POW

ERTR

AIN

39 Battery Type Maintenance Free Maintenance Free40 Volts / Cold Cranking Amps v / cca 12V/475 12V/900 x 2 12V/475 12V/900 x 241 Engine Manufacturer PSI 4.3L Kubota 3.8L Turbo Diesel PSI 4.3L Kubota 3.8L Turbo Diesel42 Engine Power @ Governed Speed hp (kw) 96 (72) @ 2400 RPM 74 (55) @ 2200 RPM 105 (79) @ 2400 RPM 96 (72) @ 2400 RPM 74 (55) @ 2200 RPM 105 (79) @ 2400 RPM43 Torque @ Rated RPM ft lbs. (Nm) 210 (285) @2400 RPM 227 (309) @ 1400RPM 275 (373) @ 1600RPM 210 (285) @2400 RPM 227 (309) @ 1400RPM 275 (373) @ 1600RPM44 Number of Cylinders / Displacement No / cc (ci) 6/4302 (263) 4/3769 (230) 6/4302 (263) 4/3769 (230)45 Transmission Type, Standard Powershift Powershift

46a Standard Speeds, Forward/Reverse 2/2 2/246b Optional Speeds, Forward/Reverse 3/2 3/247 Hydraulic Tank Capacity (Drain and Refill) gal (liter) 18.9 (71.7) 18.9 (71.7)48 Fuel Tank Capacity (Diesel Powered Units Only) gal (liter) 19.7 (74.8) 19.7 (74.8)49 Auxiliary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (155) 2250 (155)

H135-155FT SPECIFICATIONS

14

• PSI 4.3L, V-6 emissions compliant engine• Electronic powershift transmission

– Hydraulic inching– Electronic shift control– 2 speeds forward, 2 speeds reverse

• Premium oil-cooled wet disc brakes• MONOTROL® pedal• 2-Stage limited free-lift (LFL) VISTA™ mast with

maximum fork height of 133” (2400 mm)• 48.0” (1219 mm) wide hook-type carriage with 48.0”

(1219) tall load backrest extension • 48.0” (1219 mm) long forks • 6 degrees forward and 10 degrees backward mast tilt • 3-function hydraulic control valve• Integrated dashboard display includes:

– LCD display:– Fuel level (diesel only)– Hour meter– Coolant temperature– Clock– Messages– Service indicator lights:– Alternator– Transmission oil temperature– Engine oil pressure– Brake fluid level– Fasten seat belt– Low fuel level– Engine malfunction– System malfunction– Park brake– Coolant temperature– Forward, reverse and neutral direction indicators

• Hydrostatic power steering • Non-suspension vinyl seat • No-cinch seat belt• Electronic horn• Adjustable steer column• Rubber floor mat • High air intake• Integral tie downs • Operator restraint system • Combi-cooler radiator• Single pedal inch brake• Cowl-mounted hydraulic control levers• Swing out LPG tank bracket • Pressure sensing low LPG fuel sensor• 100” (2531 mm) tall overhead guard• 12 months / 2,000 hours manufacturer’s warranty• 36 months / 6,000 hours manufacturer’s powertrain

warranty • Operator’s manual• UL Classification LPG

• Kubota 3.8L EPA Certified Tier 4 Final high output turbo diesel engine

• Kubota 3.8L DOC EPA Certified Tier 4 Final turbo diesel engine

• DuraMatch™ transmission– Electronic inching– Electronic shift control– Auto deceleration system– Controlled power reversal– Controlled roll back on ramps– 3 speeds forward, 2 speeds reverse

• LED lights (brake/tail/back-up) • Powertrain protection system • Premium monitoring• High air intake with precleaner• Accumulator• Keyless start (with auxiliary key switch)• Dual LPG tank bracket• Return to set tilt• TouchPoint hydraulic mini-levers with fully adjustable

armrest• Rear drive handle with horn button• Full suspension seat - vinyl or cloth• Swivel full-suspension seat - vinyl or cloth• High-visibility non-cinch seat belt with or without

interlock• Impact monitor with immediate or delayed shutdown• Load weight display• Operator pre-shift checklist• Dual-inch brake pedals• Operator password protection• Audible reverse activated 82-102 dB(A) self-adjusting

alarm• Visible amber LED strobe light - continuously activated,

overhead guard mounted• Parts publications - printed or CD, serial number specific• UL Classification D, LPS, DS• Various light packages available with halogen or high

intensity LED:– Two front and one rear work lights– Two front, one rear work light and two brake/tail/back-

up lights• Cab includes the following:

– Front and rear wiper– Full light package– Integral heater– Defogger– Removable doors– Operator dome light– Fan– Optional air conditioning

• Side view mirrors

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

AT-A-GLANCE FEATURES

15

Service — Your local Hyster® dealer offers a flexible, customized and comprehensive maintenance plan based on each lift truck’s operation environment. Hyster service programs offer scheduled inspections and maintenance, along with quick, responsive service dispatched to your location.

For more than 80 years, Hyster has been conquering the world's most demanding applications. In the 1920’s Hyster started as a manufacturer of lifting machines used in the rigorous logging industry of the United States' Pacific Northwest. A few years later the first forklift trucks were invented and the Hyster brand quickly gained its reputation for rugged quality. Hyster® lift trucks are designed to lower your cost of operations. Every truck we make — gasoline, LPG, diesel and electric — is purpose-built to excel in its application. Every truck is also backed by an unmatched network of specialists.

Special Products Engineering Department (SPED) — Different materials require different handling. That’s why we can work with you to customize your lift trucks. From strobe lights to specially made forks, SPED has the tools to help you get the job done right.

Hyster Capital — We can arrange solutions for special financing requirements, taking the difficulties out of buying the equipment you need. Whether you purchase or lease a new or used lift truck, Hyster Capital offers superior service and competitive rates.

Rental Products — When leasing or buying isn’t a practical option, we have access to more than 14,000 units for short- and long-term rental. We’ll help you maintain output in a cost-effective manner.

Parts — With genuine Hyster® replacement parts and UNISOURCETM parts for all makes of lift trucks, we are your one-stop source for lift truck parts. In fact, we offer more than 7 million part number crosses for most brands of materials handling and other in-plant mobile equipment.

Hyster Fleet Services — Even if you operate other brands, we can manage your maintenance and replacement plan. We can offer complete fleet analysis, fleet history summary and a cost-effective proposal for replacement and scheduled maintenance.

Operator Training — Proper education in operating lift trucks minimizes the risk of injuries due to accidents while increasing productivity. Hyster offers OSHA-compliant materials that support the training of qualified operators.

Dealer Network — Our Dealer Network can offer the expertise of fleet managers, parts suppliers, capital procurement specialists and trainers. Hyster's carefully chosen dealers fully understand customer applications, assist in selecting the right lift truck and provide fast, reliable support.

INNOVATIVE TRUCKS ENGINEERED TO MEET THE MOST DEMANDING APPLICATIONS

Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006Part No. H135-155FT/B3/2016 Litho in U.S.A. All trucks shown with optional equipment. © 2016 Hyster Company. All rights reserved.

Hyster, and STRONG PARTNERS. TOUGH TRUCKS. are registered trademarks in the United States and certain other jurisdictions. Hyster products are subject to change without notice.

Visit us online at www.hyster.com or call us at 1-800-HYSTER-1.