DEVELOPMENT OF NOVEL AMINE SOLID SORBENTS FOR NOVEL AMINE SOLID SORBENTS FOR POST-COMBUSTION CO 2 CAPTURE H. Yamada , J. Fujiki, R. Numaguchi, K. Kida, F. A. Chowdhury, K. Goto, K. Yogo Research Institute of Innovative Technology for the Earth Kyoto, JAPAN 11th European Conference on Coal Research and its Applications Coal Research and its Applications September 7, 2016 University of Sheffield, UK
17
Embed
H. Yamada , J. Fujiki, R. Numaguchi, K. Kida, F. A ... · POST-COMBUSTION CO2 CAPTURE H. Yamada , J. Fujiki, R. Numaguchi, K. Kida, ... free energy and reaction pathway Yamada et
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DEVELOPMENT OF NOVEL AMINE SOLID SORBENTS FORNOVEL AMINE SOLID SORBENTS FOR
POST-COMBUSTION CO2 CAPTURE
H. Yamada, J. Fujiki, R. Numaguchi, K. Kida,F. A. Chowdhury, K. Goto, K. Yogo
Research Institute of Innovative Technology for the Earth
Kyoto, JAPAN
11th European Conference onCoal Research and its ApplicationsCoal Research and its Applications
September 7, 2016University of Sheffield, UK
Contents
Overview of the project
Strategy for the development of novel
solid sorbents
f f h l d b Performance of the new solid sorbents
S & f t l Summary & future plan
COCS Project (20042009)
Conventional New amine R1 R3
MEA 4.0 GJ/ton CO2
R2
2.5 GJ/ton CO2
/ 2 2
Goto et al. Int J Greenhouse Gas Control 5 (2011) 1214
Recent Advances in Post-Combustion CO2 Capture Chemistry, ACS Symp Ser (2013)
Development of Soid Sorbents for CO2 Capture(2010 2015)(20102015)
ObjectiveI ti S lid S b t
R & D
Separation energy < 1.5 GJ/ton CO2
Innovative Solid Sorbent
Amine/ 2
for post-combustion capture Solid sorbent+
4.0
5.0
/ton
CO
2)
Vaporization heatSensible heat
Poroussupport
2.0
3.0
ener
gy (G
J/ Sensible heatHeat of absorption
System Evaluation Tool
PC
0.0
1.0
gene
ratio
n e
RITE S lid b
Capture & Compression Storage
PC power plant
Reg MEA
sol.RITEsol.
Solid sorbent(target)
Separation
Requirements for the Target: 1.5 GJ/ton CO2
High working capacity (> 3 mol CO /kg) High working capacity (> 3 mol CO2/kg)
Low heat of adsorption
Gray et al. Int J Greenhouse
Gas Control 2 (2008) 3
Strategy Increasing amine content
by the wet impregnation method using polyaminesby the wet impregnation method using polyamines
Improving regeneration efficiency
by the structural modification of amino groups
NH2
NH
NH2n
OHN
R''
R'
Substituentintroduction
OH R
Blending
NH
NH
NH
n RR
H H
Design of Effective AmineHeat of reaction for CO2 capture
R1R2NH + CO + B R1R2NCOO + BH+
H
R1R2NH + CO2 + B R1R2NCOO + BH
Stability of carbamate G
R1R2NCOO + H2O HCO3 + R1R2NH
Effects of functional groups R1 R2 and base BEffects of functional groups R1, R2, and base B analyzed using the density fictional theory, solvation models and spectroscopic methods in terms of enthalpy, free energy and reaction pathway
Yamada et al. Ind Eng Chem Res 49 (2010) 2449Yamada et al. Ind Eng Chem Res 49 (2010) 2449
Yamada et al. J Phys Chem A 115 (2011) 3079
Yamada et al. J Mol Model 19 (2013) 4147
Yamada et al. Int J Greenhouse Gas Control 17 (2013) 99
ProcessesVacuum swing adsorption (VSA)Vacuum swing adsorption (VSA)Steam-aided VSA (SA-VSA)
CO2 Capture Performance of RITE Solid Sorbent
1.5 GJ/t-CO2
Temperature of sorbets
Recovered CO2
CO2-in
CO2-out
SA-VSA is suitable for CO2 recovery using the RITE sorbent.High purity > 98%Hi h i ld 93%High recovery yield > 93%
SummarySummary Amine-impregnated solid sorbents were developed for
energy efficient CO2 capture.
Bl di f l i d lk l i bl d th Blending of polyamine and alkanolamine enabled the
increase of CO2 capacity.
The efficiency of regeneration was drastically increased
by the newly designed polyamineby the newly designed polyamine.
RITE sorbets achieved 1.5 GJ/t-CO2 regeneration energy
with high purity (98%) and high recovery yield (93%) from
a simulated flue gas.a simulated flue gas.
Current Project (2015)
RITE is partnering with Kawasaki Heavy Industries, Ltd on the development of the dust es, td o t e de e op e t o t esolid sorbent system.
Project Objectives:
Material optimizationMaterial optimizationto develop low cost production of the solid sorbent, sorbent durability, and commercial scale productioncommercial scale production
Process optimizationby operating bench scale (5 ton CO2/d) y p g ( 2/ )and pilot scale (3040 ton CO2/d) units on exhaust gas
Okumura et al. Energy Procedia 63 (2014) 2249
This project was sponsoredThis project was sponsored by METI, Japan.