H-Strut ® 1-800-2-HAYDON [email protected] www.haydoncorp.com H-Strut ® Metal Framing & Accessories H-Block ® Rooftop Support Systems All Products Made in USA Local 210 International Brotherhood of Teamsters All products are Union made. Member of National Electrical Manufacturers Representatives Association Member of Specialty Tools & Fasteners Distributors Association Member of the Metal Framing Manufacturing Association Member of the Fabricators & Manufacturers Association Foundation Testing All Rooftop Supports have been tested by an accredited independent laboratory to the following: • ASTM D575 Method B – Modified – Compression/Deflection • ASTM D1171 Modified – Ozone Resistance • Freeze/Thaw Environmental Simulation H-Block ® Rooftop Support Systems • Made from 100% post- consumer recycled materials • LEED Certifiable • Patented • Meets the Buy America Act • American Reinvestment Recovery Act (A.R.R.A.) • No deteriorations • Corners coated with high visibility safety ANSI orange • Dampens vibrations • Compatible with rooftop materials • Resistance to freeze and thaw • Solar Racking • Pipe & Conduit supports • Duct supports • HVAC supports • Cable Tray Systems • Air Conditioning supports • Roof Walkway supports • Customizable applications 4" 1 /2" Through Hole 1 /2" Through Hole 10.875" Width 9 5 /16" 4 7 /8" Base Length Width 9 5 /16" 6 7 /16" Base Length Width Strut Length Base Length Height Width Height 9 5 /16" Width Base Length Height Roller Size Base Length Width HBS-BASE SERIES HBS-10 SERIES HBS-6 SERIES HBS-CB BRIDGE SERIES HBS-CE EXTENSION SERIES HBS-R ROLLER SERIES Specifications Applications HBM-BASE ONLY SERIES HBM-5-H-164-PG HBM-HINGED PIPE CLAMP SERIES HBM-SUPPORT WITH THREADED ROD EXTENSION Mini H-Block ® • Economical • Versatile • Used for single pipe applications • Made from 100% post-consumer recycled materials • Corners coated with high visibility safety ANSI orange • Mounting and supporting without losing strength or integrity Specifications New Product MADE IN USA 6 5 /8" 2 1 /4" 5" 4" 5 3 /16" 3" MADE IN USA 6 5 /8" 5" 4 13 /16" H-164-PG Strut Channel MADE IN USA 6 5 /8" 5" 4" Height 3 /8” - 16 x 9" Threaded Rod Threaded Base Plate MADE IN USA 6 5 /8" 5" 4" Height Adj. from 10" to 12" H-132-PG Strut Channel 3 /8” - 16 x 9" Threaded Rod Channel Stocked in pre-galvanized, plain & powder coated Supr- Green, in both 10 20 ft. lengths. Available in Stainless Steel 304 & 316 Alloys. Other materials, finishes & lengths are available upon request. 3 1 /4" 1 5 /8" 2 7 /16" 1 5 /8" 1 5 /8" 1 5 /8" 1 3 /8" 1 5 /8" 1 5 /8" 1" 1 5 /8" 7 /8" 1 5 /8" 13 /16" 1 5 /8" 13 /16" Hot Dipped Galvanized (HDG).....................ASTM A-123 Zinc Trivalent Chromium (ZTC)..............ASTM B-633-85 Powder Coated Supr-Green.........................ASTM B-117 Powder Coated White, Black and Gray .......ASTM B-117 PVC Coating 40 ML Thickness.................Upon Request Finishes All H-Strut channels are stocked in the following finishes and covered in the following specifications. HDG ZTC Supr-Green PVC Pre-Galvanized (PG)....................................ASTM A-653 Plain Steel.......................................ASTM A-1011-04-SS Aluminum (Type 6063T6).............................ASTM B-221 Stainless Steel (Type 304&316)...................ASTM A-240 Materials All H-Strut channels are produced from prime structual steel covered in the following specifications. PG Plain Steel Aluminum Stainless Steel Welded Combinations All combinations illustrated are available in any H-Strut channels and in any material or finish. Suffix A Suffix C Suffix C3 Styles All configurations illustrated are available in any H-Strut channels and in any material or finish. OS3 13 ⁄ 32 ” x 3” Slot, 4” on centers OS 9 ⁄ 16 ” x 1 1 ⁄ 8 ” Slot, 2” on centers RS and RS-MOD 9 ⁄ 16 ” or 3 ⁄ 4 ” Dia. Hole, 1 7 ⁄ 8 ” on centers KO 7 ⁄ 8 ” Dia. Knockout, 6” on centers The H-Strut Difference • Raw Materials Inspection • In-line quality checks • Routine destructive testing • Shrink-wrapped painted strut bundles • Cleanest channel in the framing industry • Oil-free strut bundles that will keep your warehouses and job sites free of tramp oil • Complete material traceability with full mill certifications upon request • A rigorous quality system guarantees our ability to exceed industry tolerances • Buy American Act Compliant • American Reinvestment Recovery Act Compliant (A.R.R.A.) Accessories AUTHORIZED DEALER OF HAYDON CORPORATION PRODUCTS H-112 Channel Size: 3 1 ⁄ 4 " x 1 5 ⁄ 8 " x 12 GA H-122 Channel Size: 2 7 ⁄ 16 " x 1 5 ⁄ 8 " x 12 GA H-134 Channel Size: 1 5 ⁄ 8 " x 1 5 ⁄ 8 " x 14 GA H-142 Channel Size: 1 3 ⁄ 8 " x 1 5 ⁄ 8 " x 12 GA H-152 Channel Size: 1" x 1 5 ⁄ 8 " x 12 GA H-172 Channel Size: 7 ⁄ 8 " x 1 5 ⁄ 8 " x 12 GA H-162 Channel Size: 13 ⁄ 16 " x 1 5 ⁄ 8 " x 12 GA H-164 Channel Size: 13 ⁄ 16 " x 1 5 ⁄ 8 " x 14 GA H-132 Channel Size: 1 5 ⁄ 8 " x 1 5 ⁄ 8 " x 12 GA 1 5 /8" 1 5 /8" See Haydon’s Engineering Catalog for all H-Strut ® Metal Framing Systems products and accessories. www.haydoncorp.com Two Locations 415 Hamburg Turnpike Wayne, NJ 07470 1139 West Carrier Pkwy Grand Prairie, TX 75050 Other welded combinations available upon request. A All-Thread Rod Finish: Electro-Galvanized Length: 6 Ft. Rod Couplers Hole Sizes: 1 ⁄ 4 " thru 3 ⁄ 4 " Lengths: 7 ⁄ 8 " thru 2- 1 ⁄ 4 " THREADED FASTENERS C-1104 Universal Clamps C-1100 EMT Clamps C-1102 Rigid Conduit Clamps C-1101 Tubing Clamps Finish: EZN, CPR. HDG Material: Mild Steel, Stainless 304 & 316 PIPE CLAMPS 1 1 /8" 1 5 /8" 5 1 /8" 9 /16" Hole Size Knock Out C-900 Closure Strip (Available in Plastic) E-501 1 ⁄ 2 " or 3 ⁄ 4 " Conduit Connector Plate E-504 Conduit End Cap ELECTRICAL ACCESSORIES 3 1 /2" 6" 4 1 /4" 4 1 /4" 6" Ø 3 /4" 4 Places 4 1 /4" 4 1 /4" 3 1 /2" 6" 6" Ø 3 /4" 4 Places B-620-A Double Post Base B-620-SQ Single Post Base POST BASES A 1 /2" - 13 Set Screw A 3" 3 /8" - 16 Threads 2 3 /8" 13 /16" 2 3 /4" Ø 9 /16" C-401 Beam Clamp Use with H-132, H-164 C-402 Beam Clamp C-403 Beam Clamp BEAM CLAMPS Bolt Size "A" 1 5 /8" 3 1 /8" F-201 Square Washer F-205 4-Hole Splice Plate FLAT PLATE FITTINGS 5 3 /8" A(I.D.) 1 5 /8" 7 1 /4" B-601 “U” Support B-605 4-Hole Splice Channel * Use with H-132, H-134 FITTINGS 2 1 /4" 1 5 /8" 3 1 /2" 4 1 /8" 4" 4" 1 5 /8" 3 1 /2" A-301 Two Hole Corner Angle A-311 Four Hole Angle A-322 “Z" Angle A-335 Universal Shelf Bracket ANGLE BRACKETS 4" 3 /4" 4" 2" 8" A A H-142-IN Concrete Insert 1 3 ⁄ 8 " x 1 5 ⁄ 8 " x 12 H-152-IN Concrete Insert 1" x 1 5 ⁄ 8 " x 12 H-164-IN Concrete Insert 13 ⁄ 16 " x 1 5 ⁄ 8 " x 14 Ga. 1000 Series End Cap N-1200 Square Nut for Spot Insert H-1200 Spot Insert CONCRETE INSERTS ACCESSORIES Available in Stainless Steel Type 304 & 316 Material: Mild Steel, Stainless 304 & 316 Available in Tube & Pipe Sizes CUSHION CLAMPS Without Spring Short Spring Regular Spring Long Spring GRIP LOCK NUTS 2" 2" A-304 No-Twist Corner Angle (2 indent) 9/16" Dia. for 1/2" ATR E-505 Snap Type Fluorescent Fixture Hanger E-510 4-Hole Splice Clevis with Splice Clip