Page 1
McLaren Applied TechnologiesMcLaren Technology CentreChertsey RoadWokingSurreyGU21 4YHUK
McLaren Applied TechnologiesSuite 115
Bostick Building9801 West Kincey Avenue
HuntersvilleNC 28078
USA
Phone: +44 (0)1483 261400Fax: +44 (0)1483 261402
[email protected] /mat
Phone: +001 (704) 660 3181Fax: +001 (704) 660 8829
© McLaren Applied Technologies 2014 Revision Date: 30 Oct 2013 Page 1 of 3
Gyro3-Axis
Product Summary
Page 2
Gyro3-Axis
McLaren Applied Technologies USA: McLaren Applied Technologies
Phone: +44 (0)1483 261400Fax: +44 (0)1483 261402
[email protected] /mat
Phone: +001 (704) 660 3181Fax: +001 (704) 660 8829
© McLaren Applied Technologies 2014 Revision Date: 30 Oct 2013 Page 2 of 3
Designed to provide high performance operation under harsh operating
conditions, the tri-axis gyro accurately measures angular motion in a
compact, lightweight, robust package.
Application
• Precision chassis development.
Electrical
• Supply voltage 8 to 16V unregulated
• Reverse Polarity protection
• Supply current 105mA @ 12V
• Start-up supply current 225mA (0-500ms)
• Full scale rate ±300°/s1
• Output scale factor 6.67mV/°/s nominal
• Scale factor variation over operating temperature range ±1.40%
• Bias at Zero Angular Velocity 2.50V nominal
• Bias variation over operating temperature range ±30mV (=±4.5°/s), with respect to Signal Ground
• Non linearity ±0.2%FS
• Offset error stability over temperature and life ±10mV (=±1.5°/s)
• Scale factor error stability ±0.7% of FS
• Bias error due to g sensitivity ±0.1°/s/g (0±30g range)
• Sensitivity to cross axis rotation <2% of rate
• 8 pole 60HzBUtterworth filter2
• Noise <175 uV#Hz
• Output impedance 50#
• PT1000 temperature output
Clockwise rotation about the axis identified in the drawing, will increase the output voltage, as shown in the outline
drawing.
1Rates available are 300°/s and 75°/s
2Two pole filter available upon request. -3dB point adjustable up to 90Hz.
Connection Definition
• ASDD206-09-PN
• Connection:
Pin 1 Supply
Pin 2 Power Ground
Pin 3 Z axis signal
Pin 4 Signal Ground
Pin 5 PT1000 oupput
Pin 6 PT1000 oupput
Pin 7 X axis signal
Page 3
Gyro3-Axis
McLaren Applied Technologies USA: McLaren Applied Technologies
Phone: +44 (0)1483 261400Fax: +44 (0)1483 261402
[email protected] /mat
Phone: +001 (704) 660 3181Fax: +001 (704) 660 8829
© McLaren Applied Technologies 2014 Revision Date: 30 Oct 2013 Page 3 of 3
Pin 8 Y axis signal
Mechanical
• Weight less than 70g (including cable)
Environmental
• Vibration 20Hz to 2kHz @ 8.5g rms
• Shock ½ sine approx, 50g, 1ms
• Resistant to standard motorsport fluids
• Maximum humidity 100%
• Operating temperature 0 to +105°C
• Aluminium alloy body and lid, hard anodised and dyed black
Design and manufacture is in-house, so if our existing designs do not suit your application, we can provide cost
effective customised parts to suit even the most demanding application. No engineering charges are made for simple
modifications such as customer specific connectors, cable protection and cable lengths. Please contact our technical
consultancy service who will be pleased to help.
Connector Ordercode
ASDD206-09-PN-HE O 030 375 001 007