GW1000-ABEIP - PCC is the leading Siemens WI Authorized ...€¦ · The DataLink GW1000-ABEIP is a gateway ... doesn’t already have a DF1 driver, ... up to 100 words from the 1xxxx

GW1000-ABEIP

Datalink Ethernet IP to DH+ Datalink AB Ethernet to DH+ The DataLink GW1000-ABEIP is a gateway between both Ethernet/IP and AB Ethernet to AB’s DH+ Network. The GW1000 interfaces any newer AB Ethernet/IP & AB Ethernet PLCs (ie. SLC 5/05, Compactlogix, Micrologix or PLC-5E) or MMI/SCADA/Programming package to any device/node on AB’s DH+. This gateway is a cost-effective alternative to the AB Controllogix Gateway (1756-ENBT and 1756-RIO). Applications include: SCADA/MMI/Programming Software (RLSINX/LOGIX/VIEW,Wondware, Kepware, Citect, Intellution, et. all)

packages using AB Ethernet Drivers can read/write data from/to multiple DH+ nodes. Any AB Ethernet & Ethernet/IP PLC (MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E, ControlLogix) as

Master will be able to send either read or write MSG (message) instructions to any DH+ PLC (SLC 5/04, PLC-5). DH+ as Master allows applications such as Panelview on DH+ to message SLC 5/05 on Ethernet.

For details, pricing, or to find out if this solution is suitable for your application, please contact us. Flexibility: The GW1000 allow multiple Ethernet/IP and AB Ethernet Application to message Multiple DH+ Nodes. Compact and Lightweight: Palm-sized, portable freestanding Din Rin/Desktop Controller with USB, AC/DC power option. Easy Configuration: All setup is done via Web screen or Telnet. Cost efficient: Replace Controllogix (1756-DHRIO/1756-ENBT) functionality and reduces the need to upgrade Legacy DH+ PLCs to newer AB Ethernet Processors.

Specifications: Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 Watts Installation Plastic enclosure; Freestanding or DIN rail mounting with integrated clip Environment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O Ethernet Channel: TCP/IP – 100-Base-T Serial Channel: DF1 Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP Serial channel: RS232, USB

Configuration Integrated web server for configuring communications parameters. Indicators Power DH+ status Serial Status Serial RX Serial TX Ethernet Activity Ethernet Link Pushbuttons Reset Configuration Hardware Connections – Top – 3-pin power – 3.81mm pitch removable screw terminal plug – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw terminal plug – RJ45- Ethernet Connections – Bottom – 5-pin RS485/RS422 – 3.81mm pitch removable screw terminal plug – D9 – RS232 port – USB

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990. Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows 3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below average prices. No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write your own. DataLink Technologies

1465 Slater Road Ferdale, WA, USA 98248 Toll Free (866) 709-6390 Tel: (360) 306-5878 Fax: (604) 608-9504 http://www.datalinkconverters.com/

GW1000-DHP1

DF1 TO DH+ NETWORK ALTERNATIVE / REPLACEMENT FOR 1770-KF2, 1784-P(KTX), 1784-PCMK OR SST 5136-SD

The DataLink GW1000-DHP1 is a low cost, compact alternative to Allen-Bradley’s 1770-KF2. Also provides the same functionality as the 1784-P(KTX), 1784-PCMK or SST 5136-SD.The DataLink converts A-B DF1, (Modbus & ASCII also available) serial protocol to A-B DH+ network protocol providing a serial interface to DH+ for computers, modems and OEM equipment. Applications include PLC programming and graphical user interfaces (GUIs and MMIs) such as RSLINX, RSLOGIX, Wonderware, Kepare, Intellution, Citect, etc. The serial DF1 to DH+ conversion protocol available in the GW1000-DHP1 is the same one available in the GW1000 product. The GW1000”s size, portability, and the choice between a freestanding and DIN rail model make it especially convenient for use in the office, the plant floor, or when travelling. DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990. Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows 3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below average prices. No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write your own. DataLink Technologies


GW1000-DHPA

ASCII TO DH+ NETWORK (DH+ ASCII) The newest DataLink GW1000-DHPA (ASCII DH+) is an amalgamation of two existing products: the DL3000-ASM and the DL3000-ASC. The improved compact freestanding ASCII serial interface gives customers the ability to send as well as receive ASCII messages via A-B Data Highway Plus (DH+). The DL3000-ASM facilitates ASCII data transfer to any PLC including models without an ASCII port, such as A-B’s ControlLogix. A block of data is temporarily stored in the ASM’s 240-byte buffer until the buffer is filled or an ASCII carriage return is detected in the data. Once the data is terminated, the bytes are transmitted to the PLC’s integer files in DH+ protocol format. All bytes are retransmitted in the order they were received minus the carriage return. The DL3000-ASM now has the added functionality of the DL3000-ASC, enabling ASCII messages stored in PLC-5 data tables to be transferred over DH+ (Data Highway Plus) to a serial printer or message display. The -ASM is specifically designed to buffer DH+ (Data Highway Plus) message commands sent to its station address from any PLC-5. The transmitted ASCII bytes are then flipped to produce messages on the printer in the same order as the ASCII data is entered and displayed in the PLC. Features: Flexible System Layout: scanners, printers, and message displays located anywhere on a DH+ network can send and receive ASCII messages to and from PLCs in other locations Compact and Lightweight: Small footprint for installation convenience Easy Configuration: All parameters are menu-driven High Speed: Serial speeds from 300 baud to 19.2 Kbaud and also 57.6 Kbaud

http://datatechgateways.com/wp-content/uploads/2011/01/gw1000_100_E1.jpg

Specifications: Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 Watts Installation Plastic enclosure; Freestanding or DIN rail mounting with integrated clip Environment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O Ethernet Channel: TCP/IP – 100-Base-T Serial Channel: DF1 Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP




GW1000-DHPM

Modbus to DH+ Network (Modbus to DH+) The DataLink GW1000-DHPM provides high speed interconnectivity between an Allen-Bradley DH+ and a Modbus network. The -DH+/Modbus can be any station on DH+ and can be set to either Modbus Master or Modbus Slave. Master mode enables any DH+ station to read / write up to 100 words (per message) to any 4xxxx or 0xxxx register, and to read up to 100 words from the 1xxxx and 3xxxx registers at any Modbus Slave address from 1 to 255. Slave mode enables a Modbus Master to read or write up to 1600 coils or 100 registers (per message) to bit or integer files in any PLC-5 station on DH+ (except 0). Modbus commands to address 0 can be “broadcast” to a selected range of DH+ stations. Modbus Plus Connectivity: Provides an interface to Modbus Plus via a Modicon BM85 Modbus Plus Bridge/Multiplexer Multiple Modbus Protocols: Master, Slave, RTU and Ascii Compact and Lightweight: Small footprint for easy installation Flexible Serial Interfacing: RS232C (RS422/RS485 options available) Easy Configuration: All parameters are menu-driven Fastest Throughput: Serial communications at up to 230.4 Kbaud

Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 Watts

Installation Plastic enclosure; Freestanding or DIN rail mounting with integrated clip

Environment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O Ethernet Channel: TCP/IP – 100-Base-T Serial Channel: DF1

Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP

Configuration Integrated web server for configuring communications parameters.

Indicators Power DH+ status Serial Status Serial RX Serial TX Ethernet Activity Ethernet Link

Pushbuttons Reset Configuration

Hardware Connections – Top – 3-pin power – 3.81mm pitch removable screw terminal plug – 3-pin A-B DH+/RIO – 5.08mm pitch removable screw terminal plug – RJ45- Ethernet

Connections – Bottom – 5-pin RS485/RS422 – 3.81mm pitch removable screw terminal plug – D9 – RS232 port – USB



GW1000-DHPME

DataLink Mod TCP (Modbus TCP/IP) to DH+ Datalink’s gateway interfaces your Modbus TCP/IP Network to AB’s Data Highway Plus DH+, extending the life of Allen-Bradley PLC’s without Ethernet Interfaces. The DataLink solution allows applications such as RSLogix, RSLinx, and RSView to access devices on a DH+ network from an Ethernet/IP LAN, enabling users to run MMI applications or program and monitor PLCs on a DH+ network from an Ethernet LAN station. Other MMI’s tested include Wonderware, Kepware, and Intellution. The GW1000-DHPME (Modbus TCP) combines the Lantronix Ethernet Microprocessor with DH+ (Data Highway Plus) token-ring technology. Highlights: Compact and Lightweight: The smallest and lightest freestanding/din rail mounted serial interface for custom networks available.












GW1000-DHPE

Datalink Ethernet TCP/IP to DH+ The DataLink GW1000-DHPE is a gateway between an Ethernet TCP/IP Network and AB’s DH+ Network. This cost-efficient solution extends the life of legacy Allen-Bradley PLC5 and SLC/04s by eliminating the need to upgrade each PLC with an Ethernet processor. Digi Ethernet Chip & DF1 Driver The GW1000-DHPE incorporates the Digi NS7520 Ethernet Chip on it’s board using the Digi’s Redirector software to create a tunnel over Ethernet TCP/IP for any existing serial com port DF1 driver. The beneifit of the GW1000 solution is that there isn’t any internal reformation of the serial DF1 protocol, thus eliminating a “BOTTLENECK” of an internal DF1 RS-232 link. The tunnelled packet is received by the GW1000 and directly formatted for DH+ transmission, and inversly, a DH+ received packet is immediately placed in an Ethernet TCP/IP packet for transmission to the Redirector software on the PC/HMI/MMI. The DataLink GW1000 Controller enables users to run MMI applications or program/monitor PLCs & SLCs on a DH+ Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView, Wonderware, & Citect. The GW1000-DHPE combines the Lantronix Ethernet Microprocessor with DataLink’s DH+ token-ring technology. Compact and Lightweight: The smallest, portable freestanding Din Rail interface available. Easy Configuration: All parameters are menu-driven. Cost efficient: Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.

Specifications:




Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IPSerial channel:


Indicators Power DH+ status Serial Status Serial RX/Serial TX Ethernet Activity Ethernet Link






GW1000-MODTCP

DATALINK MOD TCP TO DH+ | THE DATALINK GW1000-MODTCP IS A GATEWAY BETWEEN BOTH ETHERNET/IP AND AB ETHERNET TO AB’S DH+ NETWORK. The GW1000 interfaces any newer AB Ethernet/IP & AB Ethernet PLCs (ie. SLC 5/05, Compactlogix, Micrologix or PLC-5E) or MMI/SCADA/Programming package to any device/node on AB’s DH+. This gateway is a cost-effective alternative to the AB Controllogix Gateway (1756-ENBT and 1756-RIO). Applications include: * SCADA/MMI/Programming Software (RLSINX/LOGIX/VIEW,Wondware, Kepware, Citect, Intellution, et. all) packages using AB Ethernet Drivers can read/write data from/to multiple DH+ nodes. * Any AB Ethernet & Ethernet/IP PLC (MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E, ControlLogix) as Master will be able to send either read or write MSG (message) instructions to any DH+ PLC (SLC 5/04, PLC-5). * DH+ as Master allows applications such as Panelview on DH+ to message SLC 5/05 on Ethernet. Flexibility: The GW1000 allow multiple Ethernet/IP and AB Ethernet Application to message Multiple DH+ Nodes. Compact and Lightweight: Palm-sized, portable freestanding Din Rin/Desktop Controller with USB, AC/DC power option. Easy Configuration: All setup is done via Web screen or Telnet. Cost efficient: Replace Controllogix (1756-DHRIO/1756-ENBT) functionality and reduces the need to upgrade Legacy DH+ PLCs to newer AB Ethernet Processors.

http://datatechgateways.com/wp-content/uploads/2011/01/gw1000_100_E1.jpg

Specifications:





Serial channel:








GW1000-485EIP

Ethernet/IP to AB’s DH+ & DH-485 using CIP & 2222 Protocols. Gateway between Legacy AB PLCs and AB Ethernet. – DataLink now offers the GW1000 package that significantly reduces your AB Ethernet upgrading costs as you don’t need to replace each DH+ PLC processor/device. – AB PLC users can interface bi-directionally between Allen-Bradley Data Highway Plus (DH+) / DH-485 and AB Ethernet (CIP & 2222 protocols). – AB Ethernet (Master) to DH+ is the optimal communication direction. This allows multiple AB Ethernet (CIP and 2222) devices to communicate to multiple DH+ nodes using the DataLink GW1000. Ethernet IP to DH+ protocol converter.

DataLink Technologies Gateways has been providing industrial network users with connectivity solutions since 1990. Our products interface computers, modems, OEM equipment, variable speed drives and SCADA systems to Allen-Bradley Data Highway Plus and Remote I/O Link, Modicon Modbus, Siemens, Toshiba & custom protocols. DataLink products have been tested and proven with all major PLC programming software, MMIs, and SCADA (Supervisory Control And Data Acquisition) packages. DataLink devices connect to a wide variety of operating systems including DOS, Windows 3.1, Windows 95, Windows NT, Macintosh, OS/2 and QNX. We offer exceptional, quality products and support at below average prices. No Special Software Drivers Needed. DataLinks simply use the efficient A-B DF1 drivers already available with most popular PLC applications. This simplifies systems integration and reduces start-up time and costs. If your application doesn’t already have a DF1 driver, we can recommend third party suppliers or provide information so that you can write your own.

DataLink Technologies


GW-1000-ABEIP-DH-485 Datalink Ethernet TCP/IP to DH-485 The Datalink GW1000-ABEIP-DH-485 is a gateway between an Ethernet TCP/IP Network and AB’s DH-485 Network. This cost-efficient solution extends the life of legacy Allen-Bradley PLC2, PLC3 and SLC/03s by eliminating the need to upgrade each PLC with an Ethernet processor. The DataLink GW1000-ABEIP-DH-485 Controller enables users to run MMI applications or program/monitor PLCs & SLCs on a DH+ Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView, Wonderware, & Citect. The GW1000-ABEIP-DH-485 combines the Lantronix Ethernet Microprocessor with DataLink’s DH+ token-ring technology. Compact and Lightweight: The smallest, portable freestanding Din Rail interface available. Easy Configuration: All parameters are menu-driven. Cost efficient: Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.

Specifications:

Interfaces A-B Channel : Synchronous; SDLC Transformer-coupled Ethernet Channel: 10 Base-T


Installation Metal enclosure; Freestanding or DIN rail mounting clips

Environment Operating: +32 F to 122 F (0 C to +50 C) Storage: -40 F to +185 F (-40 C to +85 C) Humidity: 5% to 95% non-condensing

Protocols A-B Channel: Allen-Bradley Data Highway 485 or Remote I/O Ethernet Channel: TCP/IP – 10 Base T

Configuration Telnet to IP address for configuring communications parameters.

Indicators Green for power-on Bi-Color for DF1 tunneled over TCP/IP Bi-Color for A-B Channel operation Bi-Color for GW1000-ABEIP-DH-485 Status Green for Network Link Status Green for DF1 Channel operation Red for Diagnostics

Pushbuttons Reset and Configure mode pushbuttons

Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 10 Base–T; TCP/IP

Hardware Z182 Processor; 64 Kbyte programmable EPROM; 32 Kbyte RAM; 256 byte EEPROM; 3-pin A-B DH+/RIO; DB9 configuration port; 2-pin power connectors RJ45- Ethernet Connector Lantronix – Cobox Micro.



GW1000-DH485A

Ascii to DH-485 Network (DH-485 Ascii) The DataLink GW1000-DH485A is a compact, DinRail ASCII Gateway to A-B DH-485 network protocol. It provides an ASCII interface to PLC’s on the DH-485 Network for printers, bar code scanners, and other ASCII devices. In Scanner operation the ASCII data is stored in the buffer until either a terminating character (CR, LF, CR & LF) or 240 bytes are received. The packet of ASCII data is then sent to an integer file in the PLC. In Printer operation, data stored in PLC ASCII files can be outputted to printers or message displays with a simple write command to the GW1000. Serial Interfacing CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0) CHB – DH-485 Non Isolated Interface CHC – Future use












GW1000-DH485E

Datalink Ethernet TCP/IP to DH-485 The Datalink GW1000-DH485E is a gateway between an Ethernet TCP/IP Network and AB’s DH-485 Network. This cost-efficient solution extends the life of legacy Allen-Bradley PLC2, PLC3 and SLC/03s by eliminating the need to upgrade each PLC with an Ethernet processor. The DataLink GW1000 Controller enables users to run MMI applications or program/monitor PLCs & SLCs on a DH-485 Network from an Ethernet LAN station. Tested applications include RSLinx,RSLogix,RSView, Wonderware, & Citect. The GW1000-DH485E combines the Lantronix Ethernet Microprocessor with DataLink’s DH-485 token-ring technology. Compact and Lightweight: The smallest, portable freestanding Din Rail serial interface available. Easy Configuration: All parameters are menu-driven. Cost efficient: Reduces the need to purchase an AB Ethernet Processor for each PLC/SLC.

Specifications: Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 Watts Installation Plastic enclosure; Freestanding or DIN rail mounting with integrated clip Environment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O Ethernet Channel: TCP/IP – 100-Base-T Serial Channel: DF1Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP





GW1000-DH485M

Modbus Gateway to DH-485 Network (Modbus to DH-485) The DataLink GW1000-DH485M is a Modbus master/slave interface for computers, MMIs, and OEM based applications that require access to a node on AB’s DH485 network. Highlights include palm-size portability, DC power, external Din Rail cabinet with Modbus USB or serial functionality to DH-485. The Modbus/DH485 can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using either RTU or ASCII protocols. The Modbus/DH485 in Master Mode can read from and write to registers and coils in any Modbus Slave device connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC or SLC connected to the DH485 network. Serial Interfacing CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0) CHB – DH-485 Non Isolated Interface CHC – Future use

Specifications: Physical Dimensions Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm) Weight: 0.66lbs (0.3kg) Power: 9-27 VDC; Less than 2 Watts Installation Plastic enclosure; Freestanding or DIN rail mounting with integrated clip Environment Operating: +32 F to 122 F (0C to +50 C) Storage: -40 F to +185 F (-40C to +85C) Humidity: 5% to 95% non-condensing Protocols A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O Ethernet Channel: TCP/IP – 100-Base-T Serial Channel: DF1 Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IPSerial channel:





GW1000-DH4851

DF1 to DH-485 Network (DH-485 DF1) The DataLink GW1000-DH4851 is a Modbus master/slave interface for computers, MMIs, and OEM based applications that require access to a node on AB’s DH485 network. Highlights include palm-size portability, DC power, external Din Rail cabinet with Modbus USB or serial functionality to DH-485. The Modbus/DH485 can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using either RTU or ASCII protocols. The Modbus/DH485 in Master Mode can read from and write to registers and coils in any Modbus Slave device connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC or SLC connected to the DH485 network. Serial Interfacing CHA – RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0) CHB – DH-485 Non Isolated Interface CHC – Future use




Communications A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IPSerial channel:









GW1000-ABEIP - PCC is the leading Siemens WI Authorized ...€¦ · The DataLink GW1000-ABEIP is a gateway ... doesn’t already have a DF1 driver, ... up to 100 words from the 1xxxx

Documents