GVK Emergency Management and Research Institute (A · PDF fileGVK Emergency Management and Research Institute ... The list and detailed specifications of the material to ... reputed

INVITATION OF BIDS FOR PROCUREMENT VARIOUS MEDICAL EQUIPMENT

1 | P a g e

GVK Emergency Management and Research Institute

(A Public Private Partnership between GVK Group and Government of Chhattisgarh)

C/o New Government Dental College, Rajbandha Maidan, Opp. Escorts Hospital, Raipur-492001, CG

Invitation of Bids for Procurement of Medical Equipment

1. Important dates and deadlines for the tender are as below:

a. Tender Reference No. : CG/ME&ET/108 CG/12/17-18 Dated: 05-06-2017

b. Price of Bidding document (Non refundable) : Rs. 1000

c. Postal Charges, inland : Rs. 200

d. Date of commencement of sale of bidding document : 05-Jun-2017

e. Last date and time (IST) for sale of bidding document : 19-Jun-17 up to 12 Hrs.

f. Last date & Time for Submission of Tender Document : 19-Jun-17 up to 1PM

g. Date of time (IST) for opening of tender document : 19-Jun-17 at 2PM.

h. Address for communication, receipt and venue of the bid opening:


(Department of Supply Chain Management)

New Government Dental College, Rajbandha Maidan,

Opp. Escorts Hospital, Raipur-492001, CG

GVK Emergency Management and Research Institute, a pioneer in Emergency Management Services in

India and a not - for - profit professional organization operating in the Public Private Partnership (PPP)

mode (here in after referred as GVK EMRI), located at New Government Dental College, Rajbandha

Maidan, Opp. Escorts Hospital, Raipur-492001, CG, invites bids from various suppliers including

Manufacturers for procurement of various Medical Equipment as per details given below.


2 | P a g e

2. The list and detailed specifications of the material to be purchased along with formats for

furnishing the information required from bidders participating in tender are as per annexures

attached.

a. Annexure-1: Specifications of medical equipment along with List and Quantity of

Medical Equipment required

b. Annexure-2: Format for quoting the prices

c. Declaration Certificate

3. The above mentioned tender document is available in the website of GVK EMRI (www.emri.in)

and can also be purchased in hard copy on payment of Rs.1000 (Rupees One thousand only) by

way of a Demand Draft drawn in favour of “GVK Emergency and Management and Research

Institute, Payable at Raipur, Chhattisgarh” from Mr. Sanjay Sinha, Department of Supply Chain

Management, GVK EMRI-Chhattisgarh. Bidders who download the document from website have

to submit the Demand draft at the time of tender submission.

4. Any supplier who is interested to supply in accordance with the requirements stated in the

attached annexures should carefully read the tender document before filling, signing and

returning the same to this office. You must also furnish at the time of tender submission all the

information and documents as called for in tender, failing which your tender is liable to be

rejected.

5. The completed bids must be received at the office of GVK Emergency Management and

Research Institute, Chhattisgarh, India, on or before time and date given above. It will be the

sole responsibility of the bidder to ensure that their bid is received at the address specified

above on or before the specified date & time mentioned.

6. Bids will be opened in the presence of Bidders/authorized representative(s) who choose to

attend the bid opening on the specified date and time at the office of GVK EMRI CG at the

address given above.

7. In the event of the last date specified for receiving and opening the bids being declared as a

closed holiday for GVK EMRI’s office, the last date for submission of bids and opening of bids will

be the following working day at the same venue and time.

8. Bids may be evaluated separately for each line item.

9. The bid documents are non-transferable.

Head, Supply Chain Management

For and on behalf of

GVK Emergency Management and Research Institute, Chhattisgarh (Operations)


3 | P a g e


(A Public Private Partnership between GVK Group and Government of Chhattisgarh)

New Government Dental College, Rajbandha Maidan, Opp. Escorts Hospital, Raipur-492001, CG.

Tender Guidelines

Date: 05-06-2017

Tender No: CG/ME&ET/108 CG/12/17-18

Definitions

a. PO – Purchase Order

b. EMD – Earnest Money Deposit

c. DD – Demand Draft

d. BG – Bank Guarantee

e. BC – Banker’s Cheque

f. Purchaser – GVK EMRI

g. Tenderer – Bidders who have submitted Valid Tender Document

h. Supplier – Successful Bidder (s), to whom, the tender quantity is distributed to

i. SBU – Strategic Business Unit

j. Sample – One piece manufactured / Supplied by bidder

k. OEM – Original Equipment Manufacturer

l. Bidder – OEM or Authorised Trading partner such as dealers / distributors

2. Price Validity

The prices quoted and quantities offered for supply in tender shall remain open for acceptance -

90 days from the date of bid opening.

3. Price Schedule

Prices shall be quoted as per the format enclosed at Annexure-2. Price will remain firm and fixed

for all supply orders placed during the period of Rate Contract.

4. Terms of Delivery

The Tenderer shall be responsible to arrange safe delivery of goods, by rail/road at the delivery

address given below. The rates quoted by the Tenderer should include all costs (including all

kinds of taxes) for free delivery to consignee’s site at destination i.e.


Department of Supply Chain Management (Div: Stores)

C/o. New Government Dental College, Rajbandha Maidan,


4 | P a g e

Opp. Escorts Hospital, Raipur-492001, CG.

Contact Person: Mr. Sanjay Sinha, SCM Department, Cell: +91-83700-18108.

5. Qualification Criteria for Eligibility:

a. Primary manufacturers or their Authorized Distributors and dealers are eligible to

participate in the tender. A “Primary manufacturer” is a manufacturer that performs all

the manufacturing and processing operations needed to produce goods in their

appropriate dosage form, including processing, blending, formulating, filling, packing,

labeling and quality testing.

b. The bidder must have manufactured or marketed the specific equipment offered against

this Bid, for at least last three (3) years. If a product has been newly introduced in

market, the approval of such product shall be at the discretion of technical committee.

c. Past performance of the bidder should be submitted (Performance certificates issued by

reputed institutions/hospitals shall only be accepted)

6. GMP Certification

The bidder must produce a Good Manufacturing Practice (GMP) certificate (issued by either

WHO or Government of India) valid on the date of bid opening failing which such tender is likely

to be rejected at the sole discretion of GVK EMRI CG.

7. Bidder’s Profile

Bidder should not have been convicted for any criminal or economic offences by any court in

India or abroad.

8. Code of Conduct

Any bidder found violating the ethics of business and code of conduct at the time of tender

evaluation/proceedings shall be disqualified.

9. Annual Turnover

Bidders shall have an average annual turnover of at least Rs. 10 Lacs during the last three years.

10. Submission of Bid

The Bid should be in a sealed cover super-scribed “Tender for Supply of Medical Equipment”

and clearly mention Tender number and date.

The Super-scribed sealed cover shall consist of three sealed covers inside:

A. Super scribed Sealed Cover A - Prequalification cover:


5 | P a g e

a. Earnest Money Deposit equivalent to 3% of bid value in the form of a DD

drawn in favour of “GVK Emergency and Management and Research

Institute, Chhattisgarh”

b. IT returns and financial statements for last three years.

c. Excise Duty/Sales Tax/VAT registration and clearance certificate.

d. Copy of PAN/TAN.

e. Relevant manufacturing/Supplier licenses.

f. Customer feedback opinions.

g. Valid Authorization letters from the OEMs (in case of trading partners) for

Supply & Participation in Tender.

h. DD / Pay Order for Rs 1000 against application fee, for all Internet

Downloaded tender bids.

i. Addresses and contact numbers of local service providers - Mandatory

B. Super scribed Sealed Cover B :Technical Specifications offered (Specifications of

Equipment supplied and Pharmacological Agents ,

C. Super scribed Sealed Cover C: Price Bid as per format in Annexure-2

Tender will be evaluated in three stages:

a. Preliminary evaluation:

I. Please refer Preliminary evaluation process as per Annexure-VIII

II. All vendors are requested to strictly submit the documents in sequence as per preliminary

evaluation criteria.

b. Technical evaluation:

All vendors who meet the preliminary criterion and submit technical bids conforming to the

technical evaluation criterion will be shortlisted for commercial evaluation.

The vendor should provide the satisfactory certificate and technical evaluation certificate or any

other proof stating his work quality provided by earlier customers he worked with for the same

kind of vehicle & specification.

Tender committee may scrutiny the details provided by the vendor and will decide the eligibility

of the vendor to next stage.


6 | P a g e

Compliance certificate should be provided by the vendor for all the technical spectations line

item wise as per Annexure-II

GVKEMRI shall consider the information furnished by vendor on technical requirements as

sufficient and qualify the vendor for price bid opening. If, at any stage of pre-supply and post

supply period, if it is found that any information furnished by the vendor is either false or hidden

or fabricated, such vendor may be blacklisted by GVKEMRI and prohibited from participating in

any of future tenders for a period of 10 years. GVKEMRI may at its sole discretion will use

services of a third party to verify the authenticity of the data furnished by vendors

c. Commercial evaluation

Commercial Bids of the vendors, who qualify in the Technical Bid Evaluation, will be opened.

L-2 and other qualified vendors will be contacted only if L-1 vendors fail in delivery schedules/any other

tender terms and conditions.

11. Bid Submission

The Bid should be dropped in the box provided for this purpose at main reception of GVK

Emergency Management and Research Institute, New Government Dental College, Rajbandha

Maidan, Opp. Escorts Hospital, Raipur-492001, CG, India. Bids being sent through courier by

outstation bidders should instruct the respective courier company to drop the sealed Tender

document in the designated box kept at the reception.

12. Bid Completeness

The Bid should be properly page numbered, signed on each and every page and should be

complete in all aspects. Bid documents that do not provide complete information and / or that

are submitted after the above specified time shall be rejected.

13. Declaration Certificate

Bidder should sign the “Declaration certificate” provided in the tender form accepting that they

have read and understood, all the Terms and Conditions stipulated for in the Tender, and are

willing to abide by these tender terms and conditions”, before submitting the tender document.

Tenders submitted without the Signed declaration certificate will be considered incomplete and

will not be considered at the sole discretion of GVK EMRI.


7 | P a g e

14. EMD Amount / Performance Guarantee

Each tender form should be accompanied by EMD amounting to 3% of bid value in the form of

Demand Draft in favor of GVK EMRI-Chhattisgarh payable at Raipur. EMD may be exchanged for

a Bank Guarantee for the successful bidder at the time of release of Purchase order at the sole

discretion of GVK EMRI. For L2, EMD would be returned after due acknowledgement (from L1)

of the confirmation of PO and delivery schedules. For L3 onwards, the DD will be sent back, in a

stipulated time of 14 working days from the date of finalization of tender. A performance bank

guarantee amounting to 10% of value of order will have to be provided by successful bidders

before release of Purchase order (either in the form of a DD or a bank guarantee as per standard

format of GVK EMRI)

15. Price

a. All Quotes shall be in Indian Rupees inclusive of all taxes and duties, as applicable.

b. All freight costs & Transit insurance are to be borne by the bidder.

c. If more than one bidder has quoted exactly the same price in their bids, and if it has

become the Lowest Bid (L1), the decision of the Purchaser is final to allocate the

schedule quantity between the L1 bidders.

16. Technical Evaluation

a. Technical evaluation of the items tendered will be done by a Technical Committee

constituted by the GVK EMRI in consultation with officials from Commissioner, Health &

Family Welfare or any other competent authority as designated by the Government of

Chhattisgarh.

b. Tenders submitted with technical specifications confirming with those mentioned in this

tender form will only be considered.

c. The Price bids of vendors who are successful in Technical Evaluation only would be

considered and bids of others will not be opened.

d. In case, if Technical Committee is not convinced with any of the specific items in one

annexure with respect to Quality parameters, then it is Committee’s decision whether

to opt for Item-wise ( in the same annexure) quality evaluation and qualify multiple

bidders for the same annexure or not.

e. The decision of the Committee formed by Purchaser would be final.

f. Nothing in ANY OF THE CLAUSES OF THIS CONTRACT shall in anyway release the Supplier

from any warranty or other obligations under this contract.


8 | P a g e

17. Place Of Inspection

All the evaluation and inspection will be done at the venue of tender opening i.e. GVK EMRI CG

Campus at New Government Dental College, Rajbandha Maidan, Opposite Escorts Hospital,

Raipur, Chhattisgarh or at any other place that would be informed in advance to the bidders. In

an event of no communication, it is deemed that place of tender opening shall be the place of

inspection.

18. Samples For Inspection

All bidders shall arrange for the samples. Hence, the bidders are advised to be prepared on the

day of tender opening. Submission of samples for technical evaluation is mandatory irrespective

of previous affiliation/approvals at other GVK EMRI units. Vendor who has already supplied

earlier for quoted item need not to be arrange sample.

19. Commercial Evaluation

a. Bids of the bidders who qualify the Technical Bids will be opened in the presence of

Bidders / representatives.

20. Quantity Allocation To Successful Bidders

Each Delivery Schedule of Requirement incorporated in the tender enquiry document will be

ordered from Lowest Responsive Bidder (L1). However, it is purchaser’s decision to assess the

capacity of the L1 bidder to support the requirement. In case, if the purchaser feels that the

entire quantity cannot be allocated to L1, it may happen that, the rest of the business will be

dealt with L2 and so forth, in the order of Price Bids subject to acceptance to supply at L-1 price.

21. Authorization For Signing Documents

a. The person who is signing the tender document should be an authorized signatory of

the respective supplier’s organization and shall carry an authorization letter on

company’s letter certified by a person not below the rank of a General

Manager/CEO/Director/Other Senior level position.

b. All agents who are participating in the tender on behalf of a manufacturer/distributor

shall have valid “Authorization letter” in original duly signed by the

manufacturer/distributor.

22. Responsibility For Performance Of Contract

The Supplier shall be entirely responsible for the performance of the contract in all respects in

accordance with the terms and conditions as specified in the Contract. The Supplier shall not

sublet, subcontract, transfer or assign the contract without the written permission of the

Purchaser. In case, permission is given by the purchaser, Supplier shall be liable to any


9 | P a g e

loss/damage/quality and timely delivery which the Purchaser may sustain in consequence or

arising out of such subletting of the contract.

23. Supplier Responsibility

The supplier / manufacturer here by undertake to be responsible for the delivery of the goods in

satisfactory condition and without any loss or damage at the final destination and until the same

is actually received by the Purchaser at its works or other place of final destination. For this

purpose, goods carried by the roadway or other carrier shall be deemed to be carried at the risk

of the supplier. If on inspection at final destination the Purchaser discovers any discrepancy or

damage, the Purchaser will be entitled (not-with-standing that the property of goods shall have

passed on to the company) to refuse acceptance of the goods altogether and claim damages

and/or cancel the contract and buy its requirement in the open market at the risk and cost of

the supplier, reserving always to itself, the right of forfeiture of any amount found due and

payable or the deposit, if any, placed by the supplier for the due fulfillment of the contract as

also to recover any amount, if already paid.

24. After sales support and availability of spare parts.

a. Details of local service provider are to be provided which should include

i. Name and contact number of the person

ii. Physical address of the service provider

b. Supplier undertakes to ensure availability of all spare parts for the equipment supplied

for a period of three (03) years from the date of supply.

c. All the complaints lodged are to be attended ON SITE within a period of 48 hours from

the date of written complaint. Failure to attend to service complaint due to any reason

will not only result in forfeiture of EMD/PBG but also liable for blacklisting the supplier

from participating in any of GVKEMRI tenders across India.

25. Responsibility For Proper Packing

a. Where ever required the supplier /manufacturer shall be responsible for the items being

sufficiently and properly packed, for transport by rail/road/sea/air/ or any combination

of above, so as to ensure their being free from loss or damage on arrival at the

destination.


10 | P a g e

b. Marking of Packages, Packing: Each package delivered under the contract shall bear the

following:-

• Name of the Supplier

• PO Number

• Consignee’s name and address

• Description and quantity of contents

• Gross weight, Net weight,

• Distinctive number or mark which is also to be shown, for the purpose of

identification, on the suppliers packing list

• Manufacturing and Expiry dates

26. Delivery

a. Timely delivery is the essence of the contract and must be completed as per the dates

specified therein.

b. The Supplier shall deliver items in strict accordance with the delivery terms indicated

therein.

c. Notification of delivery or dispatch in regard to each and every consignment shall be

made by the Supplier to the Department of Supply Chain Management.(Div

Chhattisgarh-Stores).

d. If there is shelf life attached to any of the items that are mentioned in the tender, the

Supplier shall ensure the 75% of the shelf life to be left out with the goods at the time of

delivery at the Purchaser’s location. Otherwise, the Purchaser is liable to return to

inward the consignment.

e. In case if the L1 defaults or if only one bidder participates in the tender, the decision of

tender committee whether to proceed with L2 or to retender is final.

27. Penalty Clause

Should the Supplier fail to deliver the items or any consignment thereof, within the period

prescribed for such delivery, the Purchaser shall be entitled at his/ her option, to the following

value of material not delivered. The maximum penalty in any case cannot cross 5 % of PO value

for the undelivered portion.

Up to 7 Days from Delivery Due Date 0.25% Per Unit value Per Day


11 | P a g e

28. Risk Purchase

If the Supplier fails to deliver the items either in full or in part, within the prescribed delivery

period, the Purchaser shall be entitled at his option to take alternate procurement action , at the

risk & cost of the supplier for the unsupplied portion of the goods / items without canceling the

contract in respect of the items not yet due for delivery, or to cancel the contract based on

progress of work, including items not due for delivery, and, if thought fit/necessary, to purchase

the items at the risk and cost of the Supplier. The price differential in case of higher cost to

Purchaser, if any, shall have to be borne by the defaulting supplier. Moreover the defaulting

supplier shall have no claim over the quantity, which they failed to supply. It is the discretion of

GVK EMRI either to levy penalty clause and accept delayed deliveries or proceed with the

alternate procurement plan invoking the risk purchase clause.

29. Ethics

Any attempt by a Tenderer to obtain confidential information, enter into unlawful agreements

with competitors or influence the committee or the Contracting Authority during the process of

examining, clarifying, evaluating and comparing tenders shall make the tender submitted by

that tenderer liable for rejection/disqualification.

30. Quantity Of Delivered Items

a. If the Quantity received by the Target Delivery date is less than the PO Scheduled

quantity, then the Physical quantity received will be the quantity certified by the

Purchaser.

b. If the quantity received is more the PO quantity, the excess quantity shall not be paid

for, by the Purchaser. In such a case, it is left to the discretion of the purchaser to adjust

the differential quantity of excess, against future supplies.

c. In case of any supply quantity with upper and lower tolerance of over 5%, GVK EMRI will

have the right to accept or reject the material immediately.

From 8th day to 15th Day 0.50% Per Unit Per value Day

From 16th day to 22nd Day 0.75% Per Unit Per value Day

From 23rd day to 30th Day 1.00% Per Unit Per value Day

Above 30 Days 5.00% Per Unit Per value Day


12 | P a g e

31. Taxes, Duties And Levies

a. Tenderers must clearly mention their Sales Tax Registration, Excise Control Code Number

(ECC) & TIN/ SRIN in their offers and invoices.

b. Sales Tax / VAT, Excise Duty, Countervailing Duty (CVD), Entry Tax, Service Tax (ST), etc. shall

be clearly mentioned in the offer indicating the applicable rates.

c. In case if there is a decrease in the Statutory Taxes / Duties / Levies, the same has to be

passed to the Purchaser.

32. Indemnity

a. The Supplier shall at all times indemnify the Purchaser against all claims which may be made

in respect of the items, for infringement of any right protected by Patent, Registration of

design or Trade Mark and shall take all risk of accidents or damage which may occur or

failure of the supply from whatever cause arising. The Supplier shall be entirely responsible

for the sufficiency of all the means used by them for the fulfillment of the contract.

b. Supplier agrees to indemnify, defend and hold GVK EMRI and its officers, directors,

employees, agents, its parent, partially or wholly owned subsidiaries, franchisees, successors

and assigns harmless from and against any and all liability, losses, damages, claims, liens,

expenses or causes of action including, but not limited to reasonable legal fees and

expenses that may be incurred by GVK EMRI, arising directly or indirectly out of, or in

connection with, Supplier’s violation or breach of any of the terms of this Agreement or any

act or omission to act by Supplier in violation of this Agreement. GVK EMRI shall provide

Supplier with prompt written notice of any claim for which indemnification is sought and

shall have the right to participate in the defense of any such claim.

33. Quality Assurance

a. Supplier represents and warrants that it shall fully comply with all written quality

assurance requirements or instructions of GVK EMRI, and as they may be amended from

time to time on mutually agreeable terms. Supplier further represents and warrants

that the Product shall be produced, manufactured, stored and shipped by Supplier in

strict compliance with all applicable central, state and local laws.

b. Supplier shall maintain the highest standard of quality in the Product production

process. Supplier shall follow and abide by all directions, requests, suggestions or

instructions of GVK EMRI regarding the quality standards required by GVK EMRI in

connection with the manner of production, manufacture, Packaging, storage and

delivery of the Product.


13 | P a g e

c. Supplier agrees to permit and facilitate GVK EMRI or its agent to inspect the facilities

where the Product is being produced and packaged at all times, without prior notice,

and in GVK EMRI’s sole discretion.

d. At delivery, GVK EMRI in its sole discretion may reject any Product produced or

manufactured by Supplier for any reason, including, but not limited to defects, or failure

to meet GVK EMRI’s quality standards, etc.

e. Supplier shall assemble the parts of kit as authorized in writing by GVK EMRI. Any

proposed changes to either quality or number of parts of kit by Supplier must be made

in writing to GVK EMRI and GVK EMRI, in its sole and absolute discretion, may accept or

reject any proposed ingredient changes.

34. Warranties and Obligations

a. Supplier irrevocably offers warranty of the product against any manufacturing defects

and replaces the defective product within (as applicable) from the date of notice and

further contamination of material.

b. Supplier represents and warrants that the methods and processes used to produce the

Product does not, to the best of its knowledge and belief, infringe any valid right of any

third party.

c. Supplier represents and warrants that it will use its best efforts to produce and

distribute the Product in accordance with the terms and conditions of this Agreement.

d. Supplier shall be solely responsible for the production and distribution of the Product

and will bear all related costs associated therewith, except as otherwise provided in this

Agreement.

e. The supplier must replace, free of charge, any items which owing to defect in design,

and material or workmanship fail or show signs of failure in the stipulated warranty

period.

f. Replacing the defective items should be done immediately within 5 working days,

irrespective of root cause; subsequently, root causing to be done and warranty rules to

be implicated.

35. Compliance of the Laws of the land


14 | P a g e

a. Supplier shall comply with all state and local laws and regulations regarding the Product

manufacture and production, shall obtain all necessary licensing for the operation of its

business and the production and manufacture of the Product, and shall further comply

with all quality control standards promulgated by GVK EMRI from time to time.

36. Documentation requirements

Supplier has to send the following documents along with the shipment.

a. Invoice in original along with one additional copy, both duly signed and stamped by

Supplier.

b. Original Packing list.

c. A copy of Purchase order raised by GVK EMRI

37. Product Withdrawal

a. If it is deemed necessary at any time by either GVK EMRI or Supplier or any local, state,

or central governmental agency or any other competent authority to recall or withdraw

the product produced by Supplier and being supplied to GVK EMRI, either as a result of

failure of the product or Supplier to strictly comply with GVK EMRI’s quality standards

or any governmental health rule or regulation, or shall fail to comply with any other

governmental authority or agency having jurisdiction, supplier shall bear all costs and

expenses incurred by it and/or in complying with the recall or withdrawal procedures,

unless (and only then to the extent) such recall or withdrawal is solely the result of the

negligence or misuse by GVK EMRI.

b. Any liabilities or claims either legal or financial, arising out of use of such defective

material which need to be withdrawn/recalled, shall be borne by the supplier.

c. GVKEMRI will at its sole discretion may either accept or reject the recalled/withdrawn

product after subsequent rectification of the fault in the product, subject to clearance

and acceptance by the technical committee. In case of rejection by GVKEMRI, any

payments made to supplier shall be refunded to GVKEMRI within 5 working days from

the date of written notice by GVKEMRI. If entire Purchase order quantity has not been

delivered, GVKEMRI, may, at its sole discretion either cancel or postpone the balance

quantity and shall not be liable to pay to vendor for the balance quantity.

d. If Supplier fails or refuses to promptly comply with the recall or withdrawal of the

product upon request by the GVK EMRI or any federal, state or local authority, GVK

EMRI shall take such action as it deems necessary to recall or withdraw the product


15 | P a g e

from field (Ambulances in the field) and Supplier shall immediately reimburse for the

costs and expenses incurred.

38. Product Allocation and Stocking

a. In the event there is an emergency shortage of the product due to any foreseen or

unforeseen reasons, as announced by Supplier or its designated representative, Supplier

shall stand ready to stock adequate quantities of the Product so that scheduled supplies

to GVK EMRI should not suffer for the full contract period. In an event of Supplier failing

to supply the material in ordered quantities and as per time schedules, GVK EMRI

reserves the right to procure the product of same or superior quality at same or higher

price from an alternate supply source and any difference in cost of procurement shall be

debited to Supplier.

39. Trademarks

a. Supplier shall not, without prior written consent of GVK EMRI use the trademarks or

service marks or sales marks of GVK EMRI in any manner whatsoever, unless, and then

only to the extent, such use is authorized by GVK EMRI in writing and then only in

accordance with GVK EMRI’s directions or specifications. If any vendor is found violating

the trademarks of GVKEMRI, GVKEMRI may cancel the purchase order and initiate legal

action against the supplier.

40. Intellectual Property, Proprietary Knowledge and Confidential Information (Excluding the

information in the Public Domain)

a. Supplier acknowledges that in connection with this Agreement, GVK EMRI may disclose

to Supplier, or Supplier may otherwise obtain or develop knowledge of certain

confidential and proprietary information of GVK EMRI, including, but not limited to,

trade secrets, intellectual property, future business plans and services, financial, sales,

Supplier, customer, employee, investor, or other business information related to the

business and activities of GVK EMRI.

b. All such information is hereby designated by GVK EMRI to be Confidential and

Proprietary Information. Supplier acknowledges and agrees that Confidential and

Proprietary Information shall not be disclosed by Supplier or any of Supplier’s

employees, representatives, agents or contractor’s without the express written

permission of GVK EMRI. Notwithstanding the foregoing, Supplier, during the term of

this Agreement, and in order to carry out its obligations under this Agreement may

disclose Confidential and Proprietary Information to its EMPLOYEES solely for the


16 | P a g e

purpose of performing its obligations under this Agreement, and only on a “need to

know” basis. Supplier agrees that all of its employees receiving any Confidential and

Proprietary Information shall enter into a separate written confidentiality agreement

with Supplier that ensures the employee will comply with the confidentiality provisions

of this Agreement. A copy of each such confidentiality agreement shall be provided to

GVK EMRI.

c. All Confidential and Proprietary Information shall remain confidential until GVK EMRI

designates it as non-confidential or until the information becomes public through no

fault of the Supplier.

d. Supplier shall not be liable for the disclosure of Confidential and Proprietary Information

if made in response to a valid order of a court or authorized agency of government;

provided that fifteen (15) days notice first be given to the GVK EMRI so that a protective

order, if appropriate, may be sought by GVK EMRI.

e. Supplier agrees that in the event Supplier or any of its employees, contractors,

representatives, or agents breach the provisions of this Article, such breach or

threatened breach would cause irreparable harm to GVK EMRI, and in such instance,

GVK EMRI shall be entitled to injunctive and other equitable relief to prevent such

breach or to remedy any actual breach.

41. Termination

a. GVK EMRI’s Right to Terminate for Cause.

i. GVK EMRI shall have the right to immediately terminate this Agreement by

giving a written notice to Supplier in the event that Supplier does any of the

following:

• Fails to continuously produce and supply the Product for four

consecutive weeks from the date of target delivery date.

• Files a petition in bankruptcy or is adjudicated bankrupt or insolvent, or

makes an assignment for the benefit of creditors or an arrangement

pursuant to any bankruptcy law, or Supplier discontinues its business or

a receiver is appointed for Supplier or for Supplier’s business and such

receiver is not discharged within thirty (30) days;

• Fails to obtain or maintain product liability insurance in the amount and

type provided for herein


17 | P a g e

• Breaches any provision of this Agreement, and fails to cure such breach

within seven (7) days after it receives a written notice of breach from

GVK EMRI.

ii. GVK EMRI’S Right to Terminate without Cause.

• GVK EMRI shall have the right to terminate this Agreement upon thirty

(30) days written notice to Supplier.

iii. Supplier’s Right to Terminate.

• Supplier shall have the right to terminate this Agreement at any time

after the first 6 months of the Term by giving a thirty (30) days prior

written notice to GVK EMRI.

42. Infringements

a. Supplier agrees to fully cooperate with GVK EMRI in the prosecution of any such suit

against a third party and shall execute all papers, testify on all matters, and otherwise

cooperate in every way necessary and desirable for the prosecution of any such lawsuit.

The GVK EMRI shall reimburse the SUPPLIER for any reasonable expenses incurred as a

result of such cooperation.

43. Governing Law; Dispute Resolution

a. This Agreement shall be governed by, and construed in accordance with, the laws of the

India; without regard to conflict of law principles, and under jurisdiction of Raipur

(Chhattisgarh) and language shall be English.

44. Notice

a. Any notice required to be given pursuant to this Agreement shall be in writing and

delivered personally or by a nationally recognized overnight courier service, or mailed

by certified or registered mail, return receipt requested, to the other party at its address

as set forth at the top of this Agreement.

b. All such notices shall be effective upon delivery or upon refusal to accept delivery.

c. Either party may change the address to which notice is to be sent by written notice to

the other in accordance with the provisions of this paragraph.

45. Miscellaneous


18 | P a g e

a. The parties to this Agreement are independent contractors. Nothing contained herein

shall constitute this arrangement to be employment, a joint venture, a partnership, a

franchise or an agency between the parties. Neither party has the authority to bind the

other or to incur any obligation on its behalf.

b. No waiver by either party of any default shall be deemed as a waiver of prior or

subsequent default of the same or other provisions of this Agreement.

c. If any term, clause or provision hereof is held invalid or unenforceable by a court of

competent jurisdiction, such invalidity or unenforceability shall not affect the validity or

operation of any other term, clause or provision, and such invalid or unenforceable

term, clause or provision shall be deemed to be severed from the Agreement.

d. This Agreement constitutes the entire understanding of the parties, and revokes and

supersedes all prior agreements between the parties, and is intended as a final

expression of their agreement. It shall not be modified or amended except in writing

signed by the parties hereto and specifically referring to this Agreement.

e. Bidders or employees of bidder cannot claim or construed as employees of GVK EMRI.

46. Force Majeure

a. If either the Supplier or GVK EMRI be prevented from discharging its or their obligation

under this Agreement by reason of arrests or restraints by Government or people, war,

blockade, revolution, insurrection, mobilization, strikes, civil commotions, Acts of God,

Plague or other epidemics, destruction of the product by fire or flood or other natural

calamity interfering with the production, loading or discharge, the time for delivery shall

be extended by the time or times not exceeding two months, during which production,

loading or discharge is prevented by any such causes as hereinabove mentioned. The

party invoking protection under this clause shall within 2 (two) days of the occurrence of

force majeure causes put the other party on notice supported by self certificate and

documentary evidence of such incident and shall likewise intimate the cessation of such

causes. The delivery shall be resumed by the Party/Parties within 15 (fifteen) days from

the cessation of the force majeure causes.

b. Should there be any interruptions in the delivery of the product due to force majeure

circumstances hereinabove, it is hereby mutually agreed between GVK EMRI and the

Supplier that the period of off take of the Product by GVK EMRI /period of delivery of

the Product by the Supplier may be, at the sole discretion of GVK EMRI, extended by a

period not exceeding two months, equal to the actual duration of the causes


19 | P a g e

interrupting the off take by the GVK EMRI and/or delivery of the product by the Supplier

PLUS a period of one week to enable the affected party to make suitable arrangements

for normalization of shipments.

47. Liability of GVKEMRI

It is expressely understood by, between GVKEMRI and suppliers that all the operational costs

(including the Capital purchases) of running the ambulances are borne by the respective state

governments. While GVKEMRI would endeavor to release the vendor payments on time, it is

understood and agreed between GVKEMRI and supplier that, in an event of delay from

respective state governments in timely release of funds, suppliers would not hold GVKEMRI

directly responsible for such a delay and GVKEMRI shall not be directly liable for any penalties,

financial or legal, arising out of such delay in release of vendor payments beyond GVKEMRI’s

control. However any interest charges and penalties levied by suppliers on account of such

delayed payments would be put up by GVK EMRI to respective state governments for their

approvals and paid to suppliers as soon as they are received from the respective state

governments.

48. Dispute Redressal Committee

a. All disputes can be addressed by amicable settlement by committee constituted by COO

–GVK EMRI, Chhattisgarh.

49. Declaration by the Tenderer

a. The Tenderer shall be required to declare whether the proprietor or any partner of the

firm or Director of their company as the case may be, has any relation with any

employee working with the Purchaser and if so, give the name of the employee and the

relationship

50. Waiver

a. Failure to operate or to enforce any condition under this Contract shall not operate as a

waiver of the condition itself or any subsequent breach thereof.

51. Payment Terms

a. Payment shall be made within 30 days subject to availability of funds in the respective

GVK EMRI service state(Chhattisgarh)

b. The bidder should submit the bills/invoices with delivery challan and order copy with

satisfactory inspection report of the designated Technical Committee after Delivery duly


20 | P a g e

signed and accepted should be submitted at GVK EMRI, Chhattisgarh Office in original.

Three copies of each document should be made and one copy handed over to the

authority at delivery site.

52. Saving Clause: No suit, prosecution or any legal proceedings shall lie against Tender Inviting

Authority or any person for anything that is done in good faith or intended to be done in

pursuance of tender.

53. Co-terminus: The terms and conditions under this tender and enforcement of purchase order

shall be subject to co-terminus with the respective each GVK EMRI service states (Chhattisgarh).

54. Power of Cancellation: GVK EMRI reserves the right to cancel the tender notification and reject

any or all the tenders, at any time during the process of receipt, evaluation, and finalization of

tenders, without assigning any reason what-so-ever.

55. Fall Clause

a. The prices quoted for the material supplied under this tender by the Supplier shall in no

event exceed the lowest price (Excluding taxes) at which the Supplier sells or offers to

sell similar material in similar volume of identical description to any

person(s)/organization(s) including the Purchaser or any other GVK EMRI office located

at any other place in India. If at any time during the said period, the supplier reduces the

sale price (Excluding statutory), sells or offers to sell such stores to any

person(s)/organization(s) including the Purchaser or any Statutory Undertaking of the

Central or a State Government, as the case may be, at a price lower than the price

chargeable under this contract, he shall forthwith notify such reduction or sale or offer

to sale to the Purchaser and the price payable under the contract for the material

supplied after the date of coming into force of such reduction or sale or offer of sale

stand correspondingly reduced. However, if there is any change on the logistics cost, or

raw material cost which in turn is affecting the price of product, GVKEMRI may at it sole

discretion may approve such increase in price. Such increase in price, shall not apply to

prices quoted in the bid or prices mentioned in the purchase order.


21 | P a g e

56. I/We conveys unconditional acceptance to all the terms and conditions specified herein.

Signature of the Tenderer

Name in Block Letters

Capacity in which tender is signed

Address in full

Phone No


22 | P a g e

Medical Equipment

Specification


23 | P a g e

BP Apparatus (Dial)

1. BP cuff:

a. Small

b. Medium

c. Large

d. Velcro bag for the bladder

e. Chrome plated metal/ stainless steel pressure control valve

f. Bulb, tubing’s and bladder made of rubber

2. 2 years replacement guarantee

3. As per standard specification

Stethoscope Adult

1. Stain less steel Chest piece

2. Dual head rotatable with diaphragm on one side and bell on the other

3. Non-chill diaphragm and retaining ring

4. Non-chill lining for the bell

5. Soft sealing ear tips.

6. Head set anodized aluminum or stainless steel

7. Tube length 20 to 30 inches

8. Epoxy fiber glass diaphragm is desirable

9. Diaphragm diameter is an inch to 1 ½ inch

10. Diaphragm and ear piece are to be replaceable.

11. An extra set of ear piece and diaphragm should be provided.

Thermometer (Digital)

1. Sleek design

2. Flexible tip

3. Washable

4. Fahrenheit Measurement option

5. Memory of the last event

6. Temperature range must include 90 to 108oC


24 | P a g e

7. Auto power off

8. Fever alarm (100oF)

9. Should include a storage case

Pulse Oxymeter (Finger)

1. As per standard product

2. Warranty should be 2 year with replacement.

Bag mask Device Adult –Silicon

Adult bag:

1. Material

a. Bag and mask – Silicone rubber

b. Valves and membranes – Silicone rubber

c. Connectors and housing – Polysulfone

d. Reservoir – Poly Vinyl Chloride

2. Ventilator bag volume – 1600 ml

3. Reservoir bag volume – 2600 ml

4. Deliverable volume – 800 ml

5. Mask number 3-4 and 4-5 to be supplied

6. Oxygen connector tubing of length 200 cm to be supplied

7. All enclosed in bag

Bag mask Device Bag Child - Silicon

Child bag:

1. Material a. Bag and mask – Silicone rubber b. Valves and membranes – Silicone rubber c. Connectors and housing – Polysulfone d. Reservoir – Poly Vinyl Chloride

2. Ventilator bag volume – 500 ml 3. Reservoir bag volume – 600 ml 4. Deliverable volume – 320 ml 5. Mask number 3-4 to be supplied


25 | P a g e

6. Relief valve should be present a. The spring should be of stainless steel

7. Oxygen connector tubing of length 200 cm to be supplied 8. All enclosed in a bag


26 | P a g e

Suction Apparatus AC / D.C & Manual 1 Should be ≤5kg 2 Canister

2.1 Single jar 2.2 capacity minimum 500 mlL 2.3 Overflow protection mechanism 2.4 Bacteria filter 2.5 Auto-clavable 2.6 Spare canister 2.7 Polycarbonate or ABS plastic

3 Vacuum range: 3.1 In the range 0 to 750 mm/Hg 3.2 Desirable to have vacuum range indicators for pediatric.

4 Flow rate: 4.1 25-30L/min

5 Noise level: Not more than 60db 6 Power:

6.1 Should run on AC (120-240 V; 50/60Hz) and DC (12V) 6.2 Rechargeable battery (preferably Li ion) 6.3 Battery backup 4 hr

7 Wall mountable with option to detach and carry 8 Oil free diaphragm pump 9 Suction tubing should be compatible to be attached to Yankeur catheter

Suction Apparatus – Hand Held

1. Not more than 400 gm (Suction handle + empty container + catheters) 2. Canister volume 250 - 400 ml; made of Polycarbonate; non breakable. 3. Maximum suction pressure at least 300 mm of Hg 4. Flow rate at least be 20L/min

5. Should be supplied with adult and pediatric/neonatal suction catheters


27 | P a g e

Automated External Defibrillator (AED)

1. The device should have FDA-USA approval 2. Should be in accordance with ILCOR, ECC/ AHA-2010 guidelines.

Further the suppliers would upgrade/update as per changing Protocols and New

Guidelines as recommended by ILCOR - ECC/ AHA over a period of time during

the period of warranty and/or within 6 months from the date of expiry of

warranty. This upgrade/update would override the 2010 guidelines

upgrade/update if any. 3. The device is to be rugged and motion tolerant. To this extent the device

a. Should withstand a drop from a height of a minimum of one meter and be fully functional (including non disconnection of battery) after the fall.

b. Should withstand vibrations and variegated accelerations of dynamic environment in the moving ambulances and be fully functional (including non disconnection of battery) exposed to such vibrations and accelerations.

c. Should detect heart rhythm correctly (Accurately) while in motion. 4. Energy levels:

a. Biphasic wave forms only. b. 1

st and subsequent shocks should be of same energy (Fixed Energy Protocol)

c. The Machine should be set to deliver fixed energy between 120-200J for adults. The range is given to accommodate different technologies and waveforms that are discussed in the

ILCOR COSTR - 2010 document.

d. The machine should have pediatric mode.

e. The energy delivery in pediatric mode should be set at lower level than that for adults

and should not be more than 50J. This should be the most effective energy level in

accordance to the technology used in the machine. It is desirable that the supplier

provides evidence for the same.

f. The manufacturer would commit in writing regarding the effective energy level that the machine

is be set. (subjected to effective energy required as per the technology and waveform of specific

product). 5. Battery:

a. The battery should be Non-rechargeable b. The battery should ideally be detachable

i. If the battery is inbuilt and not detachable, the entire machine should be

replaced with a new unit in case of any malfunction.

c. There should be no possibility of either displacement or disconnection of batteries or connections in dynamic/mobile environment.

d. Life of battery should be sufficient to deliver a minimum of 200 shocks or last a

minimum of 4 calendar years. e. Indicator for the life of the battery in terms of

i. Battery level (from full to critical) - mandatory ii. number of shocks remaining - Desirable feature iii. The number of hours it can run - Desirable feature iv. Critical level battery - Mandatory


28 | P a g e

6. The machine should have automatic self calibration to ensure readiness status and capability to deliver shock at the set level of energy.

a. This self check should happen even when the battery is reinserted. This

feature needs to be supported by either audio or visual prompt. 7. Should not weigh more than 4 Kilograms with Battery 8. The machine should be Semi-automatic.

a. The feature required is that the machine should analyze the rhythm and

charge when required and the shock should be delivered only on pressing the flashing button.

9. Defibrillating pads are to be supplied 4 in numbers (2 Adult and 2 Pediatric) (Universal

pads desirable) along with the machine. a. The pads are to be disposable.

b. Supplier undertakes to maintain a vendor stock of 50 pads (38 adult and

12 pediatric) at GVKEMRI stores in respective states. c. Supplier will remain owner of such stock till GVKEMRI draws stock for consumption.

d. GVKEMRI will be the custodian and responsible for loss, pilferage or damage, if

any and will pay for the lost/damaged quantity.

e. Supplier shall replenish the stock (within 72 hours of written communication from GVKEMRI) as soon as the stock levels fall to 25 numbers for Adult and 06 for Pediatric.

f. Payment shall be made only upon withdrawal from stocks and after

consumption of minimum 25 numbers. g. Penalty Clause: Vendor shall acknowledge immediately the receipt of order from GVKEMRI for

supply of pads. h. Failure to immediately acknowledge the Purchase order and failure to supply within 72 hours

shall entitle GVKEMRI to go ahead and procure pads from alternate sources of supply and any difference in procurement price shall have to be borne by supplier/agent.

i. Failure to supply the pads as per PO and tender supply terms and conditions will attract a penalty of rupees 150 per pad/day.

j. However total penalty amount shall not exceed 25% of the purchase order value. k. All unused stock beyond the date of Expiry shall be returned by GVKEMRI and supplier agrees

to accept the same and replenish with fresh stock immediately. l. No payment will be made by GVKEMRI for the expired stock.

10. Audio Visual prompts - prompts are as below. a. Prompts during analysis of rhythms and shocks - Mandatory b. Metronome for the compressions and ventilations with a facility to switch on and off- Mandatory c. If the machine is not automated to detect the pediatric pads, it should have audio-visual

prompts which indicate the pediatric or adult mode that it is in. d. Audi-visual prompts for low battery and critical level of battery prompts in local language

(Hindi) - desirable 11. AED should have proper mount for securing the machine firmly on flat interiors of ambulance. Machine

should be easily detachable. 12. The offered product is to be covered under warranty of a minimum of 5 (five) calendar years effective

the date of delivery and acceptance of materials at GVK EMRI.


29 | P a g e

Kidney Tray Plastic 1. Made of plastic 2. 20*15*4 cm approximately 3. 500 ml Capacity

4. Should be able to withstand the mobile environment and be flexible / does not break

during regular use. 5. Atleast 3mm thickness.

Kidney tray plastic

Artery Forceps 6 in

1. Non-corrosive stainless steel 2. Non-corrosive material at joints 3. Length to be 6 inches


30 | P a g e

Surgical Scissors 1. Made of stainless steel 2. Non-corrosive joints 3. One end sharp and the other rounded. 4.Length to be 6 inches

Figure :Surgical scissors

Toothed Forceps-Dissecting

1. 6 inch 2. Made of stainless steel 3. Toothed tips


31 | P a g e

EMT Shears

1. Also called trauma shears 2. Should be able cut through 1 mm sheet, belts, denims car seat belts etc 3. Thermoplastic handles. 4. High grade Stainless steel body

5. Bent 150o

6. 7.5 inches length

Figure 5: EMT shears/Trauma Shears

Tongue Depressor (Disposable spatulas)

1. Disposable wooden spatulas 2. 6 inches long 3. Supplied in boxes of 100 pieces each

Figure 6: Disposable wooden spatulas


32 | P a g e

Pupillary Torch with batteries

1. Body made of Stainless steel or aluminum or ABS plastic 2. Run on AAA or AA batteries (2 batteries) 3. Push button start 4. Lens end Lamp 5. Only luminous Bulb 6. Yellow light

7. LED is not required

Scoop Stretcher 1. Should be made of aluminum alloy

a. Made of or covered by thermal resistant composite materials when being procured

for colder climates

2. Clutch enabled detachable interlocking between right and left halves. Clutch design – center or lateralized.

3. Adjustable length 4. Minimum two pairs of quick release belts 5. Net weight not more than 9 Kg 6. Minimum length not more than 170 cm 7. Maximum length not less than 200 cm 8. Width 40- 45 cm 9. Weight bearing up to 159 Kg

Spine board with straps and head blocks (Rigid Block)

� High Density Poly ethylene - Single piece � Rigid , Light & Floatable

� Resistant to bumps and corrosion

� Non absorbent, immune to infiltrations

� Easy to clean- water & soap should be enough.

� X ray & MRI compatible

� Net weight: Not more than 9 Kgs

� Load Capacity maximum not less than 159 Kgs � L*W*H:(180-195) * (40-45) * (3-6) � Rigid Head Blocks with 2 straps to be provided

� Straps 4 pairs with easily detachable latches/clips

� Manufacturer should provide list of disinfectants and cleansing agents for clean and disinfection


33 | P a g e

Splints:-Inflatable splints (4 sizes) 1. Made of Poly Vinyl Chloride 2. Good zipper seal 3. Half arm – 25 ±1 inches 4. Full arm - 32±1 inches 5. Half leg - 25 ±1 inches 6. Full leg- 32±1 inches 7. Should be supplied in a bag

Roller splints

1. Light weight 2. Radiolucent 3. Made of foam and alloy 4. Flexible and malleable, high indentation 5. Reusable, washable 6. 110 mm * 760 mm – 2 numbers 7. 110 mm * 460 mm – 2 numbers


34 | P a g e

Regulator 2 Stage

1. 2 stages / 2 step variable pressure reducer outlet pressure of approx.4.2 Kg / Sq.cm (60 lbs / sq.in) safety valve.

2. Automatically maintain a constant flow rate irrespective of changing volume of cylinder contents.

3. Should the oxygen line distal to the regulator blocked, the regulator automatically has to

prevent the buildup of an excessive pressure in the apparatus and tubing between the

outlet of the regulator and the obstruction. 4. Pressure gauge to indicate the contents

5. Bull Nose Hex nut & nipple made of Brass Rod instead of casting and a filter placed in

bull nose nipple. 6. The body of the regulator made of brass forging. 7. Stainless Steel opposing spring (not mild steel) to with stand opposing pressure. 8. Diaphragm specifications:

a. Made from Neoprene rubber b. O.D - 53.00 mm c. Thickness - 2.0 mm minimum

9. Valve Seat for O2 are of O.D. - 10 mm Thickness of 2.5 mm 10. Safety Relief Valve with large hole to prevent any accumulation of pressure inside the

cover (when more than 8 kg the pressure should automatically get released from safety relief valve- due to accidental leakage of gas from inside of the regulator.


35 | P a g e

Flow Meter – Back Pressure Compensated

1. Rotary pin valve control to permit adjustment of the flow rate to any desired level between 0 - 15 liters /min. Jacketed type shatter proof tubes on units

2. Body made of brass 3. Outlet at bottom of the unit to have a removable nipple (metal) 4. Transparent flow tube made of poly carbonate for durability & un-breakability

5. Flow Tube - Calibrated to indicate flow from 0 to 15 liter/min 54

6. Bobbin to be made of stainless steel to avoid rusting and unaffected by oxygen 7. Back pressure compensated 8. Should match the humidifier supplied.

Humidifier with Metal / ABS Caps

1. Unbreakable jar with metal screw on cap made of ABS fitted on top with inlet and

side outlet tubes made of metal.

2. The inlet tube ends in to a diffuser for oxygen to bubble through water before reaching the outlet. Humidifier - screw on type –

3. Should match the flow meter supplied.

Oxygen Cylinder D

D-type B-Type

Shell Chrome Molybdenum Alloy 34 Cr Chrome Molybdenum Alloy 34 OR Manganese steel Cr OR Manganese steel

Capacity: 46.7 Liter water capacity. 10 Lt Water capacity

Working pressure (Minimum) 150kg/cm2 at 15

o c 150kg/cm2 at 15

o c

Test Pressure (minimum 250kg/cm2 at 15

o c 250kg/cm2 at 15

o c

Wall thickness (minimum) 5.5 mm minimum 4.2 mm minimum

Gas ( O2): Around 7000 liter of O2 1500 Lt of O2

Standard: IS 7285 Part 1 IS 7285 Part

Valve: IS 3224 IS 3224

Statutory certifications: ISI Standards, BMP Certification ISI Standards, BMP Certification WHO & Certified by Dept Explosives WHO & Certified by Dept

–GOI Explosives -GOI

Matching Key cum Spanner to Matching Key cum Spanner to Matching Key cum Spanner to

release oxygen release oxygen release oxygen

Hoses used from cylinder to the Should withstand a pressure of not regulator if at all any less than 160 Kg/cm

2 or 2250 psi


36 | P a g e

Portable Oxygen Cylinder with dial type flow meter

1. Made of Aluminum 2. Dial type flow meter with regulator 3. Minimum 350 liters of oxygen 4. Water capacity of 2-3 L 5. Height around 1 ½ foot 6. Diameter not more than 4 ½ inches 7. Sufficiently small to be carried in back pack (not more than 3 Kg) 8. Should be able to withstand 139 bar

Oxygen Hood

1. Made of acrylic

2. An oxygen port with a diverting mechanism to disperse oxygen within the hood rather than directing it on to the patient

3. Detachable lid 4. Small size


37 | P a g e

Auto Loader – Collapsible stretcher

1. Made of aluminum alloy. 2. Collapsible. Wheeled to slide into the ambulance with ease without damaging the

ambulance floor. 3. One person should be able to raise and lower it into an ambulance easily. 4. Provision for head end elevation. Position adjustable backrest for breathless

patients from 0 to at least 60 degrees. a. The raising the backrest is either by telescopic mechanism or any safe mechanism

but should not come apart while the head end is raised. 5. Swing down or push down side Railings on either side. Strong enough to prevent

patient falls 6. IV fluid holding rod to go with the Stretcher 7. Levers to control front and hind legs to fold while loading the stretcher in to the

ambulance 8. Lever to lock & unlock the legs to prevent collapse of the stretcher while standing 9. The wheels should have 120 mm to 150 mm diameter with ball bearings to ensure

smooth rolling and ensure maximum comfort to the patient. 10. Locks for the wheels 11. Straps 3 in number to restrain the patient 12. Fixing devices to secure the stretcher in place on the ambulance floor/platform not

allowing side to side or vertical movements while on run. Centre lock as per GVK EMRI’s requirement is required.

13. 50 mm thick high density foam mattress with Head rest -up holstered with water proof and fire proof rexin

14. Net weight : 40 Kgs Gross Weight 50kgs 15. Bearing Pressure or maximum load not less than 159Kgs. 16. Product dimensions:

a. length Minimum not more than 185 to a maximum 200cms; b. width minimum not more than 50 to a maximum 60 cms; height 85 to 95cms

17. Loading height should match the ambulance floor height. 18. Stretcher should have front and back small sliding wheels.

Wheel chair with 4 wheels

1. Should be light, safe and reliable 2. Made of aluminum alloy 3. With 4 wheels 4. Folded size: 93*51*16 5. Back Height: 91 cms Width: 50cms 6. Seat height: 49 cms Width : 50 cms 7. Wheel to Wheel outer length – 17.5” 8. Net weight: 8 Kgs 9. Pull through, telescoping long handles built in to lift patients & carry them through narrow passages. 10. Two handles on the top to facilitate the lifting of patients , working in harmony with telescoping handles 11. Loading Weight : up to 159 Kgs


38 | P a g e

Goggles

1. Scratch resistant clear lenses 2. Protective covering on the sides too so as to offer protection on the sides too.

Bed Pan

1. Made of light weight polyethylene 2. Resistant to stains & cracks 3. Contoured design molded plastic for adults with wide seat 4. Can be boiled or autoclaved up to 275 degrees F 5. 350-pound weight capacity 6. 'pontoons' on sides to aid stability

7. Recessed tailbone area for comfort

Needle & Syringe Destroyer

1. Electric or Non-electric 2. Power source 220-240 V AC (12 V DC is desirable) 3. Burn/Damage the needle and cut the syringe tip. 4. Should not cause injuries

5. The damaged needles should automatically collect in a container which can be

transferred to sharps container without direct handling of needles. 6. Electric needle and syringe destroyers should be shock proof and made of ABS plastic or steel

Needle and Syringe destroyer- Non electric


39 | P a g e

Needle destroyer Electric

Urine Pan Plastic

1.

Clear plastic translucent finish;

2.

Stain resistant plastic,

3.

Graduated 1000 ml capacity male and 800 ml female;

4.

Autoclavable

5.

Universal pan OR one male and one female pans as unit

Figure 13: Male Urine pan

Figure 14: Female Urine pan


40 | P a g e

Cervical Collar Hard

1. Adjustable size a. Polypropylene hard sheet lined by polyethylene foam inside. b. Single piece c. 4 or more adjustable sizes in the same collar d. Velcro strap for fixing

e. Tracheal and back panel openings enough for neck exam and ongoing back of

the neck exam f. Radiolucent, MRI, CT compatible

2. Fixed size: a. Single piece hard plastic lined by foam inside. b. Velcro strap for fixing

c. Tracheal and back panel openings enough for neck exam and ongoing back of

the neck exam d. Radiolucent, MRI, CT compatible

e. Large, medium and small sizes

EXTRICATION TOOLS:

12" WRENCH ADJUSTABLE OPEN END:

1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

90. 12" SCREW DRIVER STANDARD SQUARE BAR:



41 | P a g e

91. 8" SCREW DRIVER PHILIPS HEAD # 2: 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

92. HACKSAW WITH 12" CARBIDE WIRE BLADE: Shall be able to withstand the rugged condition of the emergency usages

Shall be durable , even after repeated use

93. VISE GRIP PLIERS 10":


42 | P a g e


94. 5LB HAMMER WITH 15" HANDLE:

1. Shall be able to withstand the rugged condition of the emergency usages

2. Shall be durable , even after repeated use

95. FIRE AXE BUTT 24" HANDLE: 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

96. WRECKING BAR WITH 24" HANDLE: 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use


43 | P a g e

97. 51" CROWBAR PINCH POINT:


98. BOLT CUTTER WITH 1" TO 1/4" JAW OPENING: 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

99. SHOWEL POINTED BLADE:



44 | P a g e

100. TIN SNIPS, DOUBLE ACTION 8" MINIMUM


Shall be durable , even after repeated use

101. GAUNTLETS (Leather Gloves): 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

102. ROPES 5400LB TENSILE STRENGTH IN 50': 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use


45 | P a g e

103. MASTIC KNIFE


104. SPRING LOAD CENTER PUNCH: 1. Shall be able to withstand the rugged condition of the emergency usages 2. Shall be durable , even after repeated use

105. PRUNING SAW: 1. Shall be able to withstand the rugged condition of the emergency usages



46 | P a g e

106. FIRE EXTINGUISHER ‐‐‐‐ 65KGS WITH FIXING STAND:

1. Stored Pressure Type 2. 65 Kg capacity 3. Dry Chemical Powder ABC Based 4. Shall be able to withstand the rugged condition of the emergency usages 5. Shall be durable , even after repeated use

LUMINOUS SEARCH LIGHT (RECHARGEABLE):

Overcharge Protection Yes

Rechargeable Battery Yes

Battery Output 6 V

Battery Capacity 4500 mAh

Power Consumption 3 W

Power Requirements AC 230 V, 50 Hz




47 | P a g e

Annexure- 1 (Item List)

Sr. No. Item Description Qty/Amby Total Qty

Required

1 Autoloader- Collapsible stretcher 1 6

2 Scoop Stretcher 1 6

3 Wheel Chair 1 6

4 Spine Board (with Head immobilizer) 1 6

5 Suction Apparatus-Hand held 1 6

6 Battery Operated Suction pump 1 6

7 Pulse Oxymeter(Finger Type) 1 6

8 Oxygen Cylinder D Type 2 12

9 Oxygen Key 1 6

10 Oxygen cylinder -Portable 1 6

11 BP Apparatus (Dial) 1 6

12 Needle & Syringe Destroyer 1 6

13 Stethoscope 1 6

14 Thermometer (Digital) 1 6

15 Bed Pan (Steel) 1 6

16 Kidney Tray (Steel) 1 6

17 Non Disposable Sputum Cup (Steel) 1 6

18 Toothed Forceps - Diseecting 6 " 1 6

19 BP Cuff Pediatric 1 6

20 Urine Pan Male (Steel) 1 6

21 Urine Pan Female (Steel) 1 6

22 AED 1 6

23 Camera 1 6

24 Mobile 1 6

25 AVLT 1 6


48 | P a g e

26 Mouth 2 Mouth Ventilation device Adult 1 6

27 Mouth 2 Mouth Ventilation device Child 1 6

28 Ambu Bag Adult - Silicon 1 6

29 Ambu Bag Child - Silicon 1 6

30 Adjustable Cervical Collars 1 6

31 Cervical Collars-S 1 6

32 Cervical Collars-M 1 6

33 Cervical Collars-L 1 6

34 Simple Splints - SA 1 6

35 Simple Splints LA 1 6

36 Simple Splints SL 1 6

37 Simple Splints LL 1 6

38 Roller Splints 1 6

Extrication Tool

1 12” Wrench Adjustable Open End 1 6

2 12” Screw Driver Standard Square Bar 1 6

3 8” Screw Driver Philips Head # 2 1 6

4 Hacksaw with 12" Carbide Wire Blade 1 6

5 Vise Grip Pliers 10" 1 6

6 5lb Hammer with 15" Handle 1 6

7 Fire Axe Butt 24" Handle 1 6

8 Wrecking Bar with 24" Handle 1 6

9 51" Crowbar Pinch Point 1 6

10 Bolt Cutter with 1" To 1/4" Jaw Opening 1 6

11 Shovel Pointed Blade 1 6

12 Tin Snips, Double Action 8" Minimum 1 6

13 Gauntlets 1 6

14 Ropes 5400lb Tensile Strength in 50' Length in

Bag 1

6

15 Mastic Knife 1 6

16 Spring Load Center Punch 1 6


49 | P a g e

17 Fire Extinguisher ABC type- 5kgs with Fixing

Stand 1

6

18 Luminous Search Light 1 6

19 Pupillary Torch 1 6

20 Pruning Saw 1 6

21 Gum Boots 1 6

22 Ambulance Tool Kit 1 6

23 Goggles 1 6

24 Rescue fire blanket 1 6

25 Scissors 6" with Round tip 1 6

Note: Qty may be increase or decrease depending upon quote received or decision of committee.


50 | P a g e

Annexure-02 ( Format for Quoting prices )

S.No Material Description UoM

Price(Excl.

VAT/Tax)

(Rs.)

Sales Tax /

VAT (Rs.)

Total Price

(Rs.) Brand Name

Medical Equipment

1 each

2 each

3 each

4 each

5 each

6 each

7 each

8 each

9 each

10 each

11 each

12 each

13 each

14 each

15 each

16 each

17 each

18 each

19 each

20 each

21 each

22 each

23 each

24 each

25 each

26 each


51 | P a g e

27 each

28 each

29 each

30 each

31 each

32 each

33 each

34 each

35 each

36 each

37 each

38 each

39 each

40 each

41 each

S.No Material Description

Extrication Kit

1 each

2 each

3 each

4 each

5 each

6 each

7 each

8 each

9 each

10 each

11 each

12 each

13 each

14 each


52 | P a g e

15 each

16 each

17 each

18 each

19 each

20 each

21 each

22 each

23 each

24 each

25 each

26 each

27 each

28 each

29 each

30 each

Note: In case of discrepancy between the amount in words and figures the amount in words will prevail.