Gurit Product Catalogue Australia, New Zealand and South-East Asia [email protected] [email protected] www.gurit.com Version 33 - October 2021
Gurit Product CatalogueAustralia, New Zealand and South-East Asia
[email protected]@gurit.com
www.gurit.comVersion 33 - October 2021
GuritAUNZSEAProductCatalogue 2 GPC_AUNZSEA_33_1021
Introduction to Gurit Gurit is a leading global manufacturer of advanced composite materials and engineering. Gurit
integrates structural design, materials science and process engineering to offer a complete turnkey
composite solution.
Gurit is specialized on the development and manufacture of advanced composite materials. The
comprehensive product range comprises fibre reinforced prepregs, structural core products, process
coats, adhesives, resins and consumables. Gurit supplies global growth markets with composite
materials, composite tooling equipment, core material wind turbine blade kits, and structural
engineering. Gurit operates production sites and offices in Australia, Canada, China, Denmark,
Ecuador, Germany, Indonesia, India, Italy, Mexico, New Zealand, Poland, Spain, Switzerland, Turkey,
United Kingdom and the United States.
This catalogue covers Gurit’s Composite Materials Business Unit, providing a comprehensive range
of core, formulated and prepreg materials.
How to use this Product Catalogue This catalogue provides information on our core, prepreg, fire retardant and formulated product
portfolio of the Composite Materials Business Unit. Products from the Aerospace, Tooling and Kitting
Business Units are not covered in this catalogue.
Each individual product code is categorised as one of the following:
Gurit is well served by a network of representatives, who hold stocks of Gurit products locally, and
who acts as a local point of contact for technical information and sales. A list of these representatives
is given at the end of this publication.
Brief descriptions of each product and product group are given throughout to facilitate product
selection, with full information on any product obtainable from the relevant technical datasheet. These
are available on the Gurit website, www.gurit.com, or by contacting customer support. Contact details
for customer support are given at the end of this publication.
The product catalogue structure is given in the contents page. For placing orders, contact details can
be found at the end of this product catalogue. Please use the order codes provided to ensure that you
obtain the correct products.
Some Gurit products are subject to export control restrictions and destinations subject to
trade restrictions. Please contact your local Gurit Customer Support office for details.
AU/NZ = stocked product in Australia and New Zealand
AU = stocked in Australia only
NZ = stocked in New Zealand only SPECIALIST = please contact your local customer support team for product availability
A/F = packaging suitable for air freight For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 3 GPC_AUNZSEA_33_1021
ContentsPrepreg & SPRINT™ Materials ................................................................................. 4Fibre Definitions of HEC, IMC, HMC and UHMC............................................................................5
Performance Prepreg & SPRINT™ Materials..................................................................................6
High Performance Prepreg Materials..............................................................................................11
Aerospace Qualified Prepreg Materials..........................................................................................14
Industrial Prepreg & SPRINT™ Materials......................................................................................15
Prepreg & SPRINT™ Ancillaries.....................................................................................................17
Fire Retardant Materials ......................................................................................... 21Laminating Systems..........................................................................................................................22
SPRINT™ Systems...........................................................................................................................22
Prepreg Systems................................................................................................................................23
Resin Films.........................................................................................................................................23
Surface Films......................................................................................................................................23
Core Materials .......................................................................................................... 24Introduction.........................................................................................................................................24
Forms of Supply.................................................................................................................................25
Core Materials Range.......................................................................................................................27
Core Kitting / Smartpac.......................................................................................................... 32
Hi Panel.............................................................................................................................................33
Spabond™ Adhesive Systems ............................................................................... 34Spabond™ 300 Series......................................................................................................................35
Spabond™ 500 Series......................................................................................................................38
Spabond™ 700 Series......................................................................................................................41
Spabond™ 800 Series......................................................................................................................41
Liquid Systems ........................................................................................................ 42AMPRO™ Multi-Purpose Systems..................................................................................................43
Ampreg™ Laminating Systems.......................................................................................................48
PRIME™ Infusion Systems..............................................................................................................52
Filled Systems ......................................................................................................... 54Filling and Fairing...............................................................................................................................55
In-Mould Process Coats....................................................................................................................56
Tooling Systems ...................................................................................................... 57Reinforcements ....................................................................................................... 59Ancillary Products ................................................................................................... 64 Engineering & Mechanical Testing ........................................................................ 72Contact ..................................................................................................................... 75
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 4 GPC_AUNZSEA_33_1021
Prepreg & SPRINT™ Materials
Gurit’s track record of supplying out of autoclave prepregs to the wind energy & marine industries has allowed Gurit to lead the way by introducing the next generation of prepregs, specifically designed to make large composite component manufacture faster, easier and cost-effective.
Prepreg Materials
Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a pre-catalysed resin system has been impregnated by a machine. The resin systems in these materials react very slowly at room temperature, giving rise to working times of many days or months. Prepreg resins can only be fully cured by heating them to the prescribed cure temperature. The accuracy of the machinery used to combine the fabric or fibre with the resin ensures that laminates produced from prepregs have more consistent and higher fibre contents than can be achieved by wet lay-up techniques. This allows the use of very tough, strong resin systems that would be too high in viscosity to be impregnated by hand.
SPRINT™ Materials
SPRINT™ materials consist of a layer of fibre reinforcement either side of a pre-cast, pre-catalysed resin film with a very lightweight tack film on one face. The material therefore has the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT™ materials are produced by a process that differs from conventional prepreg so that the fibres in the reinforcements remain dry and un-impregnated by the resin. SPRINT™ materials are laid up in a mould and vacuum bagged as for conventional prepreg. However, when the vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in the fibre bundles and between layers to be easily removed. When the temperature is then raised for the cure, the resin film softens and flows into the air-free reinforcement. The void content of the resultant laminate is extremely low (typically 0-0.5%).
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 5 GPC_AUNZSEA_33_1021
Fibre Definitions of HEC, IMC, HMC and UHMC
Fibre Description Strength (MPa) Modulus (GPa)
HEC High Elongation Carbon > 4000 227 to 257
IMC Intermediate Modulus Carbon > 4400 275 to 310
HMC High Modulus Carbon > 4300 365 to 405
UHMC Ultra High Modulus Carbon > 4000 420 to 455
The table above provides indicative values and does not constitute a specification.
Bespoke products are available for high-volume custom applications, where specific variants of width, resin content, fibre weight, tack levels and backers can be requested. For specific enquiries please contact your local customer support representative.
Gurit prepreg product formats are described as one of the following:
1PA – single release paper applied to one side only
1PO – single poly backer applied to one side only
POPA – one poly backer and one paper applied to either side
2DPE – two poly backers applied to each side
S/S – single sided SPRINT™ product
/XXXX – the 2nd reinforcement used in a double-sided SPRINT™ e.g. /XC305
/CM – manufactured for cosmetic applications
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 6 GPC_AUNZSEA_33_1021
Performance Prepreg & SPRINT™ Materials
Gurit’s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method
Max Tg1
Typical Applications
Prepreg SE 84LV
¬ Versatile high-strength prepreg system
¬ Curable at 80°C in thick sections
60 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
High performance light-weight, high-stress structures – round the world yacht hulls and decks
SPRINT™ ST 94
¬ Drape and tackiness optimised for excellent handling
¬ Ideal for complex or vertical mouldings
¬ Excellent balance of mechanical performance and toughness
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing
SPRINT™ ST 95
¬ Good balance of mechanical properties
¬ Dry fabric resin infusion enables efficient air evacuation
¬ Toughened – resistant to micro-cracking
60 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C High volume industrial grade toughened SPRINT™ material
SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at temperatures as low as 80°C, or it can be used for faster moulding of components at 120°C. This is achieved with an extremely good out-life of up to 56 days at 21°C. SE 84LV is a tough system, and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres.
ST 94 ST 94 is a toughened SPRINT™ system offering a good balance of mechanical properties. It comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The resin film has a medium tack that makes it ideal for vertical surface applications. Although moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying single SPRINT™ layers.
ST 95 ST 95 is a toughened SPRINT™ system that offers an extremely good balance of mechanical properties. With a minimum cure temperature of 85°C (with a suitable post-cure), it is ideal for structural components where improved performance and resistance to micro-cracking is desired. ST 95 resin matrix has good flow resistant characteristics that make it stable at room temperature (21°C). The product has a light tack on one side which aids placement in a mould tool. For details of cure schedules, please refer to data sheet.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 7 GPC_AUNZSEA_33_1021
Code Selector Performance Prepreg
SE 84LV Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length
(lm) Quantity
(m2) MOQ (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 150 400 37 POPA 200 80 160 PC53-4161 AU
HEC 200 400 37 POPA 200 80 160 PC53-4160 SPECIALIST
HEC 300 400 35 POPA 150 60 180 PC53-4163 AU
HEC 300 400 32 POPA 150 60 180 PC53-5892 SPECIALIST
HEC 300 1200 37 2DPE 40 48 48 PC53-6473 SPECIALIST
HEC 300 400 37 2DPE 150 60 180 PC53-1812 SPECIALIST
HEC 300 400 34 2DPE 150 60 120 PC53-6682 NZ
HEC 450 400 35 POPA 100 40 80 PC53-4159 AU
HEC 600 400 37 POPA 90 36 504 PC53-2778 SPECIALIST
Unidirectional Intermediate Modulus Carbon (IMC)
IMC 150 400 35 POPA 150 60 160 PC53-1725 SPECIALIST
IMC 150 400 35 2DPE 200 80 160 PC53-6185 SPECIALIST
IMC 200 300 37 POPA 250 75 150 PC53-5635 SPECIALIST
IMC 300 400 35 POPA 150 60 120 PC53-2306 SPECIALIST
IMC 300 400 35 2DPE 150 60 120 PC53-5748 SPECIALIST
IMC 450 400 35 2DPE 100 40 80 PC53-7003 SPECIALIST
Unidirectional High Modulus Carbon (HMC)
HMC 150 400 35 POPA 200 80 160 PC53-1807 SPECIALIST
HMC 150 400 32 2DPE 200 80 160 PC53-5581 SPECIALIST
HMC 300 400 35 POPA 150 60 120 PC53-1808 SPECIALIST
HMC 300 400 33 2DPE 150 60 120 PC53-6501 NZ
HMC 300 400 33 POPA 150 60 120 PC53-5690 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 8 GPC_AUNZSEA_33_1021
SE 84LV Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length
(lm) Quantity
(m2) MOQ (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T 194 1270 42 1PO 50 63.5 63.5 PC13-2646 SPECIALIST
RC200T 194 1270 40 2DPE 50 63.5 63.5 PC13-5707 AU/NZ
RC200P 200 1270 42 1PO 50 63.5 63.5 PC13-5801 SPECIALIST
RC303T 300 1270 42 1PO 35 44.45 88.9 PC13-2710 SPECIALIST
RC416T 416 1270 40 1PO 25 31.75 63.5 PC13-2682 SPECIALIST
RC660T 660 1270 43.5 2DPE 20 25.4 50.8 PC13-4849 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC150 154 1270 40 1PO 75 95.25 95.25 PC23-5252 SPECIALIST
XC305 305 1270 41 1PO 50 63.5 63.5 PC23-4362 SPECIALIST
XC305 305 1270 39 2DPE 50 63.5 63.5 PC23-5931 SPECIALIST
XC411 410 1270 40 2DPE 30 38.1 76.2 PC23-5708 AU/NZ
XC411 410 1270 40 1PO 30 38.1 76.2 PC23-1738 SPECIALIST
Woven E-Glass and Aramid
RE50P 47 1270 45 POPA 100 127 127 PC11-6514 SPECIALIST
RE100H4 105 1200 38 2DPE 100 120 120 PC11-6686 SPECIALIST
RE165T 160 1270 56 POPA 60 76.2 76.2 PC11-6771 SPECIALIST
RE295 292 1240 39 1PO 50 62 62 PC11-4005 SPECIALIST
RE301H8D 300 1270 40 POPA 25 31.75 63.5 PC11-5901 SPECIALIST
REA390S 390 1200 39 1PO 50 60 600 PC11-1741 SPECIALIST
Stitched Multi-axial E-Glass
XE603 606 1250 36 1PO 25 31.25 62.5 PC21-1747 SPECIALIST
XE905 942 1270 35 1PO 15 19.05 57.15 PC21-1748 SPECIALIST
Peel Ply
NPP80 80 1000 50 1PA 100 100 100 PC15-1744 NZ
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 9 GPC_AUNZSEA_33_1021
Performance Single Sided SPRINT™
ST 94 Reinf.
Wt (gsm)
Width (mm)
Resin Content (%) Format Tack
Film Length
(lm) Quantity
(m2) MOQ(m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T 200 1270 42 S/S No 100 127 127 SR13-6001 SPECIALIST
RC200T 200 1270 42 S/S No 50 63.5 63.5 SR13-2880 SPECIALIST
RC303T 300 1270 42 S/S No 30 38.1 76.2 SR13-2845 SPECIALIST
RC303T 300 1270 38 S/S No 25 31.75 63.5 SR13-5693 SPECIALIST
RC416T 416 1270 38 S/S No 25 31.75 63.5 SR13-5694 SPECIALIST
RC416T 416 1270 42 S/S No 100 127 127 SR13-7149 SPECIALIST
RC660T 660 1270 42 S/S No 47 59.69 59.69 SR13-5350 SPECIALIST
RC660T 660 1270 42 S/S No 18 22.86 68.58 SR13-3109 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
XC305 305 1270 42 S/S No 100 127 127 SR23-6829 SPECIALIST
XC411 410 1270 42 S/S No 25 31.75 63.5 SR23-3134 SPECIALIST
XC411 410 1270 42 S/S No 100 127 127 SR23-7150 SPECIALIST
XC611 615 1270 40 S/S No 125 158.75 158.8 SR23-5358 SPECIALIST
XC611 615 1270 42 S/S No 20 25.4 50.8 SR23-7126 SPECIALIST
QC800(HEC) 800 1270 40 S/S No 49 62.2 62.2 SR23-6910 SPECIALIST
Woven E-Glass
RE301H8 300 1270 35 S/S No 25 31.75 63.5 SR11-5877 SPECIALIST
RE400T 390 1250 52 S/S No 25 31.25 62.5 SR11-5820 SPECIALIST
RE400T 390 1250 35 S/S No 25 31.25 125 SR11-7002 SPECIALIST
WRE581T 580 1250 41 S/S No 25 31.25 123.8 SR11-6932 SPECIALIST
WRE581T 580 1250 33 S/S No 25 31.25 62.5 SR11-3219 SPECIALIST
WRE850T 850 1250 35 S/S No 16 20 60 SR11-5431 SPECIALIST
Stitched Multi-axial Glass and Aramid
XA450 465 1270 46 S/S No 20 25.4 50.8 SR22-5298 SPECIALIST
XE603 606 1255 35 S/S No 60 75.3 75.3 SR21-7062 SPECIALIST
XE603 606 1255 48 S/S No 150 188.25 188.3 SR21-4558 SPECIALIST
XE603 606 1255 35 S/S No 60 75.3 75.3 SA21-2748 SPECIALIST
XE905 942 1270 36 S/S No 49 62.23 62.23 SR21-5896 SPECIALIST
XE905 942 1270 48 S/S No 49 62.23 62.23 SR21-7159 SPECIALIST
QE600 600 1200 33 S/S No 50 60 60 SR21-2518L SPECIALIST
QE1200 1200 1200 41 S/S No 50 60 60 SR21-3244L SPECIALIST
QE1200 1200 1200 32 S/S No 50 60 60 SR21-2424L SPECIALIST
Resin Film
ST 94 Film 0 1160 100 Resin Film No 100 116 116 SR00-6124 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 10 GPC_AUNZSEA_33_1021
Performance Double Sided SPRINT™
ST 95 Reinf.
Wt (gsm)
Width (mm)
Resin Content
(%) Format Tack
Film Length
(lm) Quantity
(m2) MOQ (m2)
Order Code Availability
Woven High Elongation Carbon (HEC)
RC303T/RC303T 600 1270 51 F/S Yes 15 19.05 57.15 SL13-2878 SPECIALIST
RC416T/XC305 721 1270 52 F/S Yes 13 16.51 66.04 SL23-4384 SPECIALIST
RC416T/XC305 721 1270 42 F/S POPA Yes 100 127 127 SL23-6509 SPECIALIST
RC416T/XC411 826 1270 52 F/S POPA Yes 100 127 127 SL23-6511 SPECIALIST
RC416T/XC411 826 1270 42 F/S POPA Yes 100 127 127 SL23-6964 SPECIALIST
RC416T/XA450A 881 1270 48 F/S Yes 12.5 15.875 63.5 SL22-3775 SPECIALIST
Stitched Multi-axial High Elongation Carbon (HEC)
+45C2/-45C2 422 1270 42 F/S POPA No 30 38.1 800.1 SL43-2057 SPECIALIST
+45E3/-45E3 600 1270 42 POPA Yes 18 22.86 68.58 SL41-3199 SPECIALIST
Stitched Multi-axial E-Glass
RE301/RE301 592 1270 36 F/S POPA Yes 15 19.05 57.15 SL11-2891 SPECIALIST
RA320/RA320 640 1270 45 F/S POPA Yes 15 19.05 57.15 SL12-5300 SPECIALIST
WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 100 125 125 SL11-2560L SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 11 GPC_AUNZSEA_33_1021
High Performance Prepreg Materials
Gurit’s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method Max Tg1
Typical Applications
SPRINT ST110 ¬ Car Body Panel
System SPRINT Resin
30 mins at 130°C
¬ Autoclave ¬ Vacuum Bag 115°C
Body and closure panels for automotive applications
Prepreg SC 110(T2)
¬ White spot free high clarity resin for cosmetic parts
¬ Versatile, high strength prepreg resin system
¬ Flexible cure as low as 80°C
20 mins at 150°C
¬ Autoclave ¬ Press Moulding 125°C
Ideal for high visual quality components without white-wash or white spots
Prepreg SC 160
¬ Class leading resin clarity
¬ High temperature performance
15 mins at 160°C
¬ Autoclave ¬ Press Moulding 180°C
Suitable for use in high temperature applications
Prepreg Smartcure™
¬ Rapid cure in less than 5 minutes
¬ Ideal for Hot-in Hot-out press moulding manufacture
5 mins at 150°C ¬ Press Moulding 175°C
High volume component manufacture.
ST 110 for Car Body SPRINT™ (CBS) Structural ST 110 is used to form a multi-layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.
For our range of surfacing films and syntactic core materials see Prepreg & SPRINT™ Ancillaries.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 12 GPC_AUNZSEA_33_1021
SC 110(T2) SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80°C or even faster cures are achievable using press moulding technologies at temperatures up to 150°C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range.
SC 160 SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130°C or even faster cures are achievable using press moulding technologies at temperatures up to 160°C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160°C.
Smartcure™ Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates.
Gurit Smartcure™ is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 13 GPC_AUNZSEA_33_1021
Code Selector ST 110
ST 110 Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T(C) 194 1270 42 S/S 50 63.5 63.5 SA13-6158 SPECIALIST
Woven E-Glass
RE400T 390 1250 42 S/S 50 62.5 62.5 SA11-6157 SPECIALIST
Cosmetic Prepreg
SC 110(T2) Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length
(lm) Quantity
(m2) MOQ (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200T 194 1270 40 2DPE/CM 50 63.5 63.5 PA13-6860 SPECIALIST
RC245T 245 1250 40 2DPE/CM 50 62.5 62.5 PA13-6355 SPECIALIST
RC245T 245 1250 38 POPA/CM 50 62.5 62.5 PA13-6975 SPECIALIST
RC380T 380 1250 40 2DPE 46 57.5 57.5 PA13-6425 SPECIALIST
RC400T 400 1270 40 2DPE/CM 25 31.75 254 PA13-6567 SPECIALIST
Black Pigmented (BL) Woven High Elongation Carbon (HEC)
RC200P 200 1270 40 POPA 50 63.5 63.5 PA13-7224 SPECIALIST
RC200T 194 1270 40 POPA 50 63.5 63.5 PA13-6988 SPECIALIST
SC 160 Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Woven High Elongation Carbon (HEC)
RC200P 200 1270 40 2DPE/CM 50 63.5 63.5 PA13-6444 SPECIALIST
RC200T 194 1270 40 2DPE/CM 50 63.5 63.5 PA13-7012 SPECIALIST
RC245T 245 1250 40 2DPE/CM 50 62.5 62.5 PA13-6343 SPECIALIST
RC380T 380 1250 40 2DPE 46 57.5 57.5 PA13-6412 SPECIALIST
RC660T 660 1270 35 2DPE 20 25.4 50.8 PA13-6451 SPECIALIST
RC660T 660 1270 42 2DPE 25 31.75 63.5 PA13-7053 SPECIALIST
5 Minute Curing Prepreg
Smartcure Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 195 1270 39 POPA 50 63.5 63.5 PA53-6489 SPECIALIST
Woven High Elongation Carbon (HEC)
RC245T 245 1250 46 2DPE 50 62.5 62.5 PA13-6648 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 14 GPC_AUNZSEA_33_1021
Aerospace Qualified Prepreg Materials
Advanced Composite Materials for the Aerospace Industry
Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets.
Gurit offers four resin chemistries:
Chemistry Description
Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring.
Epoxy
Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels.
Cyanate Ester
Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for air-conditioning ducting construction in aerospace applications.
Benzoxazine
Gurit’s Benzoxazine prepregs represent the next generation of fire-retardant chemistry where similar FST properties to phenolics are required. An advantage of Benzoxazine chemistry is that it is phenol and formaldehyde free meeting the latest environmental standards. Additionally, during cure, Benzoxazine prepregs are volatile-free resulting in low void and porous-free components, therefore eliminating costly reworking processes associated with the manufacture of phenolic-based prepreg components.
For further information on product availability contact your local sales office.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 15 GPC_AUNZSEA_33_1021
Industrial Prepreg & SPRINT™ Materials
Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.
Product Selector
Format System Main Features Fastest Cure
Recommended Processing Method Max Tg1
Typical Applications
Prepreg Sparpreg™
¬ UD prepreg ideal for thick structural sections
¬ Excellent handling & processing properties – no de-bulk
¬ Fully compatible with Gurit SPRINT™ and prepreg products
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
High quality monolithic unidirectional Components that require fast single shot production in thick sections
Prepreg
WE 91-1 ¬ High tack epoxy prepreg 45 mins
at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
Large Structural components such as wind turbine blade shells and shear webs WE 91-2 ¬ Medium tack epoxy
prepreg
SPRINT™ WT 93
¬ Low tack SPRINT™ resin matrix
¬ Dry fabric enables efficient air evacuation
45 mins at 120°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
125°C
Large Structural components such as wind turbine blade shells, shear webs, spars and roots
Sparpreg SparPreg™ is an advanced UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing.
WE 91-1 / WE 91-2 The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.
WT 93 WT 93 is a SPRINT™ resin system that can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 16 GPC_AUNZSEA_33_1021
Code Selector
Sparpreg Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Unidirectional High Elongation Carbon (HEC)
HEC 600 1240 34 2DPE 120 148.8 148.8 PA53-5995 SPECIALIST
HEC 600 300 34 2DPE 330 99 396 PA53-5924 SPECIALIST
HEC 600 300 34 2DPE 100 30 60 PA53-6685 SPECIALIST
HEC 600 400 34 2DPE 110 44 132 PA53-5513 AU
Unidirectional E-Glass (EGL)
EGL 1600 900 32 2DPE 250 225 225 PA51-4994 SPECIALIST
WE 91-1 Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Unidirectional E-Glass (EGL)
EGL 1200 900 32 2DPE 307 276.3 276.3 PA51-3984 SPECIALIST
EGL 1500 1470 32 2DPE 243 357.21 357.21 PA51-3985 SPECIALIST
EGL 1500 970 32 2DPE 294 285.18 285.18 PA51-3987 SPECIALIST
EGL 1600 1000 32 2DPE 219 219 219 PA51-3989 SPECIALIST
Stitched Multi-axial E-Glass
XE600 600 1250 35 2DPE 390 487.5 487.5 PA21-3980 SPECIALIST
XE600 600 1250 50 2DPE 390 487.5 487.5 PA21-3981 SPECIALIST
Peel Ply
NPP80 80 1200 50 0 100 120 120 SA15-6090 SPECIALIST
WE 91-2 Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Stitched Multi-axial E-Glass
XE1000 1000 1250 48 2DPE 248 310 310 PA21-6094 SPECIALIST
XE603 600 245 45 1PO 125 30.625 122.5 PA21-5420 SPECIALIST
XE603 600 1255 45 POPA 378 474.39 474.39 PA21-4096 SPECIALIST
WT 93 Reinf. Wt (gsm)
Width (mm)
Resin Content (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
Stitched Multi-axial E-Glass
XE603 600 1255 35 S/S 105 131.775 125.5 SA21-5224 SPECIALIST
+45E3/-45E3 600 1270 35 1PO 250 317.5 TBC SA41-4767R SPECIALIST
QE1174L 1174 1270 41 S/S 75 95.25 95.25 SA21-4390 SPECIALIST 1Includes 50g/m2 Fleece
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 17 GPC_AUNZSEA_33_1021
Prepreg & SPRINT™ Ancillaries
To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes.
Product Selector
Format System Main Features Lowest Cure
Recommended Processing Method
Max Tg1
Typical Applications
Adhesive Film SA 80
¬ Highly toughened resin matrix
¬ Consistent bond-line thickness and weight
¬ High strain to failure, high toughness
¬ Excellent handling and no mixing required
12 hrs at 80°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
100°C
Co-cure with 80°C prepregs for core and high strength adhesive bonding applications
Surface Films
SF 80
¬ Surface film to generate a resin rich surface
¬ Suitable for sub-surface applications
12 hrs at 80°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
100°C Co-cure with 80°C prepregs for resin rich surface
SF 96 ¬ Pinhole free surface
for easy preparation and application of paint system
10 hrs at 85°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
115°C
Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting
SF 95VH ¬ Silicon carbide filled
film to generate very hard wearing surfaces
10 hrs at 85°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
130°C
Ideal for applications that require a highly toughened system such as car body undertrays
Intensifying Pastes
SP 11100
¬ Co-curable with prepreg systems
¬ Compatibility of handling and processing
¬ Ideal for core splicing and gap filling
16 hrs at 70°C
¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging
75°C Core splicing and gap filling with 70°C prepregs
SP 4832 12 hrs at 80°C 100°C
Low density, core splicing and gap filling with 80°C prepregs
SP 9435 12 hrs at 85°C 100°C
Core splicing, prevent bridging and gap filling with 85°C prepregs
Syntactic Core SY 110
¬ Lightweight drapable core material
¬ Co-curable with most Gurit Epoxy Prepregs & SPRINT™
¬ Fast lay-up times ¬ Available at 0.7mm
and 1.0mm thickness
12 hrs at 80°C ¬ Vacuum Bagging 110°C
Produces ultra-light and stiff panels
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 18 GPC_AUNZSEA_33_1021
Adhesive Films SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 80°C, or can be more quickly cured at temperatures above 120°C. It has an out-life of 56 days at room temperature.
Surface Films Gurit have a range of surfacing materials specific to a number of applications. SF 80 is a pale green lightweight, sandable film curable at 80°C. It provides a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint finish can be applied.
SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive sector to protect vulnerable underbody components of both GT racing and sports cars which minimises fibre damage from foreign object impacts. For details of cure schedules, please refer to data sheet.
SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite components. Curable at 85°C with a vacuum only process it provides an easy sanding pinhole free surface finish with minimal print through from the underlying laminate. SF 96 provides a stable surface onto which a paint finish can be applied once lightly keyed.
Syntactic Core SY 110 is a lightweight drapable core material that is designed to be co-curable with most Gurit Epoxy Prepregs & SPRINT™ to produce ultra-light and stiff panels. SY 110 has a wide process window, curing from 85-130ºC. SY 110 is available at 0.7mm and 1.0mm thickness.
Intensifying Pastes Gurit’s mono-component pastes are pre-catalysed adhesive/filler systems that can be used in conjunction with Gurit prepregs and SPRINT™. They are used as in-situ fillers to bridge corners or tight radii and can also be used as core splicing adhesives. The system range covers black and white variants in high and low densities. Being pre-catalysed system, they require freezer storage for long-term stock holding. Out-life at 21°C is 20 days.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 19 GPC_AUNZSEA_33_1021
Code Selector Adhesive Films
SA 80 Reinf. Wt (gsm)
Width (mm)
Resin Weight (g) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
SA 80 Film 0 1270 100g No Carrier 100 127 127 PC00-735 SPECIALIST
SA 80 Film 0 1270 150g No Carrier 100 127 127 PP00-5476 SPECIALIST
SA 80 Film 0 1270 200g No Carrier 100 127 127 PC00-1778 SPECIALIST
SA 80 Film 0 1270 250g No Carrier 80 101.6 101.6 PC00-4202 SPECIALIST
SA 80 Film 0 1270 250g No Carrier 300 381 381 PC00-6437 SPECIALIST
SA 80 Film 0 1270 300g No Carrier 50 63.5 63.5 PC00-2270 SPECIALIST
SA 80 Film 0 1270 400g No Carrier 50 63.5 63.5 PC00-4361 SPECIALIST
SA 80 Film 25 1270 150g Scrim 100 127 127 PC11-666 AU
SA 80 Film 25 1270 200g Scrim 80 101.6 101.6 PC11-669 SPECIALIST
SA 80 Film 25 1270 250g Scrim 80 101.6 101.6 PC11-579 AU/NZ
SA 80 Film 25 1270 250g Scrim 20* 25.4 101.6 PC11-7022 SPECIALIST
SA 80 Film 25 1270 300g Scrim 80 101.6 101.6 PC11-804 SPECIALIST
SA 80 Film 25 1270 400g Scrim 50 63.5 63.5 PC11-580 AU
SA 80 Film 25 1270 500g Scrim 50 63.5 63.5 PC11-3102 SPECIALIST
Black Pigmented (BL) Adhesive Film
SA 80 Film 25 1270 400g Scrim 60 76.2 152.4 PC11-6007 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied
Surfacing Films Reinf. Wt
(gsm) Width (mm)
Resin Weight (g) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
SF80 Film 138 1255 150g 2 Scrims 80 100.4 62.75 SC11-2829 SPECIALIST
SF80 Film 138 1255 150g 2 Scrims 20* 25.1 100.4 SC11-7021 SPECIALIST
SF96 Film 138 1260 300g 2 Scrims 40 50.4 50.4 SA11-7004 AU
SF96 Film 69 1260 700g Scrim 30 37.8 75.6 SA11-4587 SPECIALIST
SF95VH Film 50 1270 300g Scrim 50 63.5 63.5 SA11-1654 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 20 GPC_AUNZSEA_33_1021
Syntactic Core Films
SY 110 Width (mm)
Resin Weight (g)
Thickness (mm) Format Length
(lm) Quantity
(m2) MOQ (m2) Order Code Availability
SY 110 Film 1270 560 0.7 No Carrier 33 41.9 76.2 SA00-4606 SPECIALIST
SY 110 Film 1250 800 1.0 No Carrier 60 37.5 75 SA00-2691 SPECIALIST
Intensifying Pastes Size Units Description MOQ (Each) Order Code Availability
SP 11100 32 x 300 ml SP 11100 RESIN 300ml CARTRIDGE/BOX 32 1 FY1100-33 SPECIALIST
SP 4832 20 x 300 ml SP4832 RESIN 300ml CARTRIDGE/BOX 20 1 FX4832-33 AU
SP 9435 20 x 300 ml SP9435 RESIN 300ml CARTRIDGE/BOX 20 1 FX9435-21 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 21 GPC_AUNZSEA_33_1021
Fire Retardant Materials
Gurit’s range of Fire Retardant (FR) products are designed to deliver high performance laminates whilst meeting demanding fire requirements. The ease of use and processing properties of these systems allow large parts to be manufactured in one operation using vacuum only consolidation.
The FR range is available in a wide variety of formats from ambient curing liquid systems to elevated temperature curing SPRINT™ products. Typical applications include cladding of buildings, interior and exterior train parts, commercial/military craft and fire protection on passenger ferries/superyachts.
Product Selector Format System Main Features Intended
Application Fire Test Standards
Laminating Ampreg 21FR
¬ Range of working times ¬ Capable of ambient only cures ¬ Ideal for wet laminating large
composite structures
Large Civil Structures
BS476 Parts 6 & 7 UL94
SPRINT™
ST 70FR
¬ Low smoke toxicity ¬ Halogen-free ¬ 70°C curable ¬ Suitable for Lloyds and MCA compliant
structures
Industrial / commercial marine craft and civil applications
BS476 Parts 6 & 7 BS 6853 Annexe B.2 ISO 5658-2 DIN 5510-2 ISO 4589-2
ST 91FR
¬ Outstanding compressive properties ¬ Low void content vacuum bag
processing ¬ Controlled flow ¬ Light tack – suitable for use in higher
ambient temperature
Civil Structures ASTM E84 UL94 BS476 Part 7
ST 130FR ¬ 85°C curable ¬ Tg > 130°C (with elevated temp cures) ¬ Excellent tack and drape ¬ HL2 in R1 and R7 to EN45545 ¬ Pass for bulk-heads, walls and ceiling
linings to IMP FTP Part 5
Rail / Industrial / Commercial marine craft
EN 45545 IMO FTP Part 5
Prepreg
SE 130FR
SE 90FRBL
¬ Black tinted resin ¬ Outstanding compressive properties ¬ Controlled flow ¬ Light tack
Civil Structures
Surface Film
SF 80FROBL ¬ Effect FR layer to epoxy substrates ¬ High gloss black surface finish ¬ Resistant to Moisture ingress
Protection of structural components; engine bays and exhaust runs in marine craft
ISO 5660-1 FMVSS302
SF 130FR ¬ Benefits from same features as
SE/ST130FR ¬ Improves demoulded surface finish
Rail / Industrial / Commercial marine craft
EN 45545 IMO FTP Part 5
Resin Film SA 130FR
¬ Benefits from same features as SE/ST130FR
¬ Provides additional resin for sandwich laminate manufacturing
EN 45545 IMO FTP Part 5
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 22 GPC_AUNZSEA_33_1021
Code Selector
Laminating Systems
Ampreg 21FR Size Units Description Mix Ratio (R:H)
MOQ (Each) Order Code Availability
Individual resin component size
Resin 257 kg Ampreg 21FR RESIN 257KG 2 F122-005 SPECIALIST
Resin 15.85 kg Ampreg 21FR RESIN 15.85KG 6 F122-004 SPECIALIST
Use the mix ratio to select recommended hardener component size
Standard 18 kg Ampreg 21FR HARD STD 18KG
100:21 (by weight)
1 F122-013 SPECIALIST
Standard 3.33 kg Ampreg 21FR HARD STD 3.33KG 1 F122-015 SPECIALIST
Slow 3.33 kg Ampreg 21FR HARD SLOW 3.33KG 1 F122-016 SPECIALIST
Extra Slow 18 kg Ampreg 21FR HARD EXT-SLOW 18KG 1 F122-014 SPECIALIST
Ultra Slow 900 kg Ampreg 21FR UL-SLOW HARD 900KG 100:18 (by weight)
1 F122-007 SPECIALIST
Ultra Slow 15.4 kg Ampreg 21FR UL-SLOW HARD 15.4KG A/F 9 F122-008 SPECIALIST
Note that relative ordering quantities are as follows:
20 x 257KG drum A21FR Resin = 1 x 900KG IBC A21FR Ultra Slow Hardener
1 x 257KG drum A21FR Resin = 3 x 18KG pail A21FR Std / Extra Slow Hardener
1 x 257KG drum A21FR Resin = 3 x 15.4KG pail A21FR Ultra Slow Hardener
1 x 15.85KG pail A21FR Resin = 1 x 3.33 KG pail A21FR Fast / Std / Extra Slow Hard
SPRINT™ Systems
SPRINT™ Reinf. Wt (gsm)
Width (mm) RC (%) Format Length (lm) Quantity
(m2) MOQ (m2) Order Code Availability
ST 91FR
RC200T 194 1270 42 S/S 40 50.8 50.8 SA13-7030 SPECIALIST
XC411 410 1270 42 S/S 150 190.5 190.5 SA23-6855 SPECIALIST
ST 130FR
XC411 410 1270 48 S/S 20 25.4 25.4 SA23-7190 SPECIALIST
XC411 410 1270 48 S/S 100 127 127 SA23-7190L SPECIALIST
RC416T 416 1270 48 S/S 25 31.8 31.8 SA13-7188 SPECIALIST
RC416T 416 1270 48 S/S 66 83.8 83.8 SA13-7188L SPECIALIST
XE600 600 1255 42 S/S 25 31.4 31.4 SA21-7222 SPECIALIST
RE295H4 300 1240 42 S/S 50 62 62 SA11-7334 SPECIALIST
WRE581T 580 1250 42 S/S 20 25 25 SA11-7186 SPECIALIST
WRE581T 580 1250 42 S/S 100 125 125 SA11-7186L SPECIALIST
WRE850T 850 1250 42 S/S 20 25 25 SA11-7220 SPECIALIST
For ST 70FR product availability please contact your local Gurit customer support representative.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 23 GPC_AUNZSEA_33_1021
Prepreg Systems
Prepreg Reinf. Wt (gsm)
Width (mm) RC (%) Format Length
(lm) Quantity
(m2) MOQ (m2) Order Code Availability
SE 90FRBL
XC411 410 1270 40 2DPE 40 50.8 50.8 PG23-6897 SPECIALIST
SE 130FR
HEC 300 400 45 POPA 150 60 60 PA53-7134 SPECIALIST
XC411 410 1270 48 2DPE 40 50.8 50.8 PA23-7139 SPECIALIST
Resin Films
Ancillaries Reinf. Reinf. Wt (gsm)
Width (mm)
Resin Weight (g) Format Length
(lm) Quantity
(m2) MOQ (m2)
Order Code Availability
SA 130FR
SA 130FR Scrim 25 1270 250 Resin Film 80 101.6 101.6 PA11-7141 SPECIALIST
SA 130FR Scrim 25 1270 400 Resin Film 60 76.2 76.2 PA11-7136 SPECIALIST
Surface Films
Ancillaries Reinf. Reinf. Wt (gsm)
Width (mm)
Resin Weight (g) Format Length
(lm) Quantity
(m2) MOQ (m2)
Order Code Availability
SF 80FROBL
SF 80FROBL Scrim 25 1270 220 Surface Film 60 76.2 76.2 SC00-2243 SPECIALIST
SF 80FROBL 2 Scrims 138 1260 220 Surface Film 50 63 63 SC11-5341 SPECIALIST
SF 130FR
SF 130FR 2 Scrims 138 1260 200 Surface Film 50 63 63 SA11-7242 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 24 GPC_AUNZSEA_33_1021
Core Materials
IntroductionCores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process.
Gurit® Corecell™ Gurit® Corecell™ is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit® Corecell™ has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit® Corecell™ grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals.
Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Other key features include outstanding chemical resistance, low water absorption and excellent thermal insulation capabilities.
Gurit® Kerdyn™ Green Gurit® Kerdyn™ Green is a recyclable, thermoplastic foam produced with up to 100% recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities. Gurit® Kerdyn™ Green is approved by Det Norske Veritas (DNV) Germanischer Lloyd (GL).
Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit® Balsaflex™ is available in range of densities, thickness and format/finish. Gurit® Balsaflex™ is approved by by Det Norske Veritas (DNV) Germanischer Lloyd (GL).
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 25 GPC_AUNZSEA_33_1021
Forms of Supply Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements.
PL – Plain Sheet – Optimum material properties. Limited bending in-mould.
PH – Plain with Bleeder Holes – Assists air release in vacuum bag processes.
Cuts for conformability (Foam)
Gurit knife cut finish is standard on Gurit® Corecell™ and Gurit® Kerdyn™. Saw cut is standard for Gurit® PVC while knife cut finish on Gurit® PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information.
SC – Single Cut – Provides flexibility in a single direction on one or both sides of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet.
DC – Double Cut – Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet.
CS – Contour Scrim – Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 26 GPC_AUNZSEA_33_1021
Forms of Supply VIC – Vacuum Infusion Core – There are several VIC options and Gurit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake.
Product Formats (Balsa) Gurit® Balsaflex™ is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating.
Other Product Formats Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method.
Fillet strips – Triangular edge strips to create tapered panel edge drop-offs, or stringer base fillets.
Kits – Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 27 GPC_AUNZSEA_33_1021
Core Materials Range
Gurit® Corecell™ M
Gurit® Corecell™ M is the next generation of Gurit® Corecell™. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit® Corecell™ M benefits from American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification.
Gurit® Corecell™ S
Gurit® Corecell™ S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit® Corecell™ S is only available in full thickness.
Gurit® Corecell™ T
Gurit® Corecell™ T is the lightest density Corecell™ foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit® Corecell™ T has ABS, GL, and DNV certification.
Gurit® Kerdyn™ Green
Gurit® Kerdyn™ Green and Gurit® Kerdyn™ Green FR are up to 100% recycled PET foam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range gained DNV-GL certification.
Gurit® PVC
Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit® PVC has DNV certification. The Gurit® PVC range also offers HT60 and HT80 with high temperature processing up to 140°C.
Gurit® Balsaflex™
Gurit® Balsaflex™ is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit® Balsaflex™ certified by Det Norske Veritas (DNV) Germanischer Lloyd (GL).
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 28 GPC_AUNZSEA_33_1021
Code Selector Gurit® Corecell™
Corecell Short Edge Marking Nominal Density
Half Sheet Size
Nominal Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm mm
Gurit® Corecell™ M available from the Gurit Tianjin CN.
M60 Yellow + Green 65 1285x1285 1285x2605 3-50 AU/NZ
M80 Yellow + Blue 85 1220x1220 1220x2440 3-50 AU/NZ
M100 Yellow + Black 107.5 1130x1130 1130x2275 3-48 AU/NZ
M130 Yellow + Light Brown 140 1015x1015 1015x2045 3-40 AU/NZ
M200 Yellow + Brown 200 915x915 915x1830 3-30 AU/NZ
Gurit® Corecell™ Tavailable from the Gurit site in Tianjin CN.
T400 White + Green 71 1285x1285 1285x2605 3-53 SPECIALIST
T500 White + Blue 94 1195x1220 1195x2440 3-40 SPECIALIST
Gurit® Corecell™ Savailable from the Gurit site in Magog (Canada)
S1200 Red + Brown 210 890x890 890x1830 21-24 SPECIALIST
S1800 Red + Mauve 315 785x785 785x1600 16-21 SPECIALIST
Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information
Gurit® Kerdyn™ Green
Core Type Short Edge Marking Nominal Density
Half Sheet Size
Nominal Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm mm
Gurit® Kerdyn™ Green available from the Gurit sites in Tianjin, CN and regional stock sites.
80 Blue 80 1220 x 1220 1220 x 2440 5-200 AU
100 Green 100 1220 x 1220 1220 x 2440 5-200 NZ
115 Black 115 1220 x 1220 1220 x 2440 5-175 SPECIALIST
135 Black + Green 135 1220 x 1220 1220 x 2440 5-150 SPECIALIST
150 Orange 150 1220 x 1220 1220 x 2440 5-135 SPECIALIST
200 Black + Yellow 200 1220 x 1220 1220 x 2440 5-100 SPECIALIST
250 Black + Blue 250 1220 x 1220 1220 x 2440 5-80 SPECIALIST
300 Black + Orange 300 1220 x 1220 1220 x 2440 5-80 AU/NZ
Gurit® Kerdyn™ Green FR available from the Gurit sites in Volpiano solely.
80 Blue + Red 80 1220 x 1220 1220 x 2440 5-200 SPECIALIST
115 Black + Red 115 1220 x 1220 1220 x 2440 5-175 SPECIALIST
180 Brown + Red 180 1220 x 1220 1220 x 2440 5-110 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 29 GPC_AUNZSEA_33_1021
Gurit® PVC and PVC HT
Core Type Short Edge Marking Nominal Density
Half Sheet Size
Nominal Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm mm
Gurit® PVC
40 Azure 40 945 x 1330 1330 x 2850 3-84 NZ
48 Lilac 48 910 x 1270 1270 x 2730 3-80 AU
60 Yellow 60 1150 x 1120 1150 x 2450 3-78 AU/NZ
80 Green 80 1020 x 1080 1020 x 2180 3-72 AU/NZ
100 Red 100 950 x 1020 950 x 2050 3-68 AU/NZ
130 Blue 130 850 x 950 850 x 1900 3-58 AU/NZ
200 Brown 200 - 750 x 1600 3-48 AU/NZ
250 Green 250 - 700 x 1500 3-47 SPECIALIST
Gurit® PVC HT
HT60 Pink 60 1120 x 1200 1120 x 2400 3-78 SPECIALIST
HT80 Light Yellow 80 1005 x 1070 1005 x 2150 3-75 SPECIALIST
Gurit® Balsaflex™
Core Type Short Edge Marking Nominal Density
Half Sheet Size
Nominal Sheet Size
Unbonded Thickness
Range Availability
kg/m3 mm mm mm
Gurit® Balsaflex™ available from the Gurit site in Equador
110 Written 110 1220x1220
1220x1220
1220x1220
610x1220 6.35-55 SPECIALIST
150 Written 155 610x1220 6.35-55 SPECIALIST
220 Written 220 610x1220 6.35-55 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 30 GPC_AUNZSEA_33_1021
Nomex Honeycomb Nomex Honeycomb - Plain Sheet (Hex)
Plain sheet Nomex is manufactured from Aramid paper & is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.
¬ The Ribbon direction is the TL direction¬ Has the highest shear property (only direction only) of all three types of Nomex.
Average Density (kg/m3) 48 64 72 80 96
Sheet Length (mm) 2440 2440 2440 2440 2440
Width (mm) 1220 1220 1220 1220 1220
Area (m2) 2.98 2.98 2.98 2.98 2.98
Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request
Paper Thickness (um) 51 51 51 or 76 51 or 76 76
Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial
Cell Size 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm)
AU/NZ NZ SPECIALIST SPECIALIST SPECIALIST
Nomex Honeycomb – Over Expanded (OX)
The Over Expanded Nomex (OX) offers excellent formability over complex shapes but the shear properties are substantially lower than plain sheet Nomex.
¬ Good formability¬ Low shear properties
The Ribbon direction is the TL direction
Average Density (kg/m3) 29 48 64 72 80
Sheet Length (mm) 2438 2438 2438 2438 2438
Width (mm) 990 990 990 990 990
Area (m2) 2.41 2.41 2.41 2.41 2.41
Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request
Paper Thickness (um) 51 51 or 76 51 or 76 51 or 76 76
Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial
Cell Size 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm)
SPECIALIST/NZ SPECIALIST NZ SPECIALIST SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 31 GPC_AUNZSEA_33_1021
Nomex Guide - which Nomex should I use?
Partially Expanded Nomex (PX) is manufactured with 3/1000th inch (76um) Aramid paper which is 50% thicker than the standard paper used in both the plain sheet (Hex) and Over Expanded (OX). The result of this is that it offers substantially higher shear properties in both directions over the standard OX while still offering the formability of the Over Expanded cell shape.
¬ The shear properties of PX Nomex are fairly even in both the TW & TL directions butare substantially better than OX Nomex
¬ The Ribbon direction is the TL direction
Over Expanded Nomex (OX) is manufactured with 2/1000th inch (51um) Aramid paper. This offer excellent formability over complex shapes but the shear properties are substantially lower than both the PX & plain sheet Nomex.
¬ Good formability¬ Low shear properties¬ The Ribbon direction is the TL direction
Plain Sheet Nomex (Hex) is manufactured from 2/1000th inch (51um) Aramid paper and is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes.
¬ The Ribbon direction is the TL direction¬ Has the highest shear property (only direction only) of all three types of nomex
High Shear Plain Sheet (HS Hex) is manufactured from 3/1000th inch (76um) Aramid paper. The shear properties are higher due to the thicker paper.
Kevlar 636 Honeycomb is available, it must be noted that this material is expensive and inherently stiffer to bend around any shape. The shear properties are higher than standard Nomex material & may allow (depending on the structural engineers) weight saving by utilising lower densities.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 32 GPC_AUNZSEA_33_1021
Core Kitting - B³ SmartPac from Gurit
B³ SmartPac is a versatile construction solution that helps builders manufacture composite components more efficiently and cost-effectively than ever before.
B³ SmartPac comprises all the reinforcement and core materials required for the job, pre-cut to the exact shape and size to fit the mould, and clearly labelled for alignment and location. The materials are packed in boxes in the order of assembly, and are accompanied by a comprehensive schematic and written construction manual, with a process defined in conjunction with the builder, and with integral quality controls.
B³ SmartPac Benefits ¬ Reduced overall costs through:
- reduced time in-mould- reduced labour costs- reduced waste levels- reduced material costs
¬ Repeatable process with known costs and known quality¬ Efficient procurement¬ Order one B³ SmartPac instead of multiple materials¬ One-stop-shop for materials, engineering, quality control, and process support¬ Improved overall quality
The B³ SmartPac is suitable for many types of marine and industrial applications, and most processing techniques and products.
¬ Volume production boats¬ Semi-custom builds¬ Custom builds¬ Commercial/military boats¬ Superyachts¬ Hand lay-up¬ Epoxy, vinylester, polyester¬ Vacuum infusion¬ Resin Transfer Moulding (RTM)¬ Prepreg and SPRINT™
Whatever the requirement, Gurit can package and supply the B³ SmartPac to meet your specific needs.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 33 GPC_AUNZSEA_33_1021
Gurit Hi-Panels
Gurit specializes in the development and manufacture of engineered structural composite panels specifically designed for light-weighting in custom marine or industrial applications to save time, cost and overall waste.
Hi-Panel system provides the builders the ease and confidence to build with high quality composite sandwich infused panels, delivered ready for assembly with an easy to follow diagram and pre labelled parts.
Benefits of building with Hi-Panels: ¬ Reduced build time with kitset panels ¬ Reduced set up and labour costs ¬ Reduced overall waste ¬ Precision assembly & fitting ¬ Panels can be pre-cut to shape ¬ Delivered as finished panels ¬ Improved quality control
Unique Features: ¬ Maximum panel size of 9m x 2m, less joining and less fairing, maximum strength and
minimum weight ¬ Structurally engineered solution by in house team ¬ Access to a full range or core materials and reinforcements ¬ Peel ply surface both sides for bonding and surface protection
Suitable for: ¬ Power and sailing catamarans ¬ Cruising and racing yachts ¬ Work boats and high speed ferries ¬ Recreational and pleasure craft ¬ Sports boats, kayaks and dinghies ¬ Caravans, RV‘s and truck bodies, sidewalls floors and interior furniture ¬ Awnings roofs, and exterior cladding move-able architectural structures, bridge decks
and removable walkways
Note: Hi-Panels are currently only available in Australia, New Zealand and the Pacific Islands
Contact Gurit on email at mailto:[email protected] or phone 64 9 415 6262 for more information.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 34 GPC_AUNZSEA_33_1021
Spabond™ Adhesive Systems
Spabond™ adhesives offer outstanding performance in high-stress, high-load applications for Marine, Wind Energy and Civil Engineering applications.
Product Selector System Properties at 20°C Description Hardener Mix Ratio Working Time*
at 20°C Clamp Time*
at 20°C Sag* Max Temp
Spa
bond
™ 3
00 S
erie
s
Structural, high dynamic load applications
Spabond™ 335 Toughened gap filling epoxy adhesive system.
Fast (Black) 2:1 (by volume)
20 mins 6 hrs 5mm 65°C
Standard (Grey) 1 hr 9 hrs
Spabond™ 340LV HT
High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine.
Fast (Red)
2:1 (by volume)
½ hr 4 hrs
20 – 25mm 68°C Slow (Purple) 4 hrs 18hrs
Extra Slow (Blue) 6 hrs 24 hrs
Spabond™ 345 Highly sag resistant. Uses: highest performance marine projects
Fast (Black)
2:1 (by volume)
½ hr 5 ½ hrs
15 – 30mm
75°C
Slow (Red) 4 hrs 12 hrs 85°C
Extra Slow (Blue) 6 hrs 19 hrs 80°C
Spa
bond
™ 5
00 S
erie
s
Specialist substrate and applications
Spabond™ 5 Minute `Tacking and secondary bonding. 1:1
(by volume) 5 mins 20 mins 10 - 15mm 55°C
Spabond™ 540
Spabond™ 540LV
High elongation, long bonding times.
Fast (Red)
1:1 (by volume)
¾ hr 3 ½ hrs
20 – 30mm
56°C
Standard (Purple) 2 hrs 15 hrs 58°C
Low viscosity resin option for easier application.
Slow (Green) 4 hrs 25 hrs 52°C
Extra Slow (Blue) 6 ½ hrs tbc tbc
Spabond™ 545 Bonds multiple substrates found in general applications.
Fast 2:1 (by volume)
25 mins 5 hrs 0.2 - 20mm
63°C
Slow 90 mins 10 hrs 61°C
Spabond™ 568 Core bonding adhesive 2:1 (by volume) 5 ½ hrs 24 hrs 10mm 65°C
Spabond™ 570 Spabond™ 570LV
Easy mixing/smooth spreading. Bonds all woods 1:1
(by volume) 1 ½ hrs - 10 -20mm 55°C
Low viscosity hardener option for easier application
Spa
bond
™
700
Ser
ies Rapid structural adhesives
Spabond™ 730 High strength, rapid curing. General purpose adhesive. 1:1 (by volume) 10 mins 1 hr 10 - 15mm 60°C
Spa
bond
™ 8
00 S
erie
s Structural WTG blade bonding adhesives
Spabond™ 820HTA Glass filled, rapid curing long open time adhesive for WTG blade bonding.
100:34 (by weight) 90 mins - 25 – 35mm 71°C
Spabond™ 840HTA High strength, rapid curing long open time adhesive for WTG blade bonding.
100:35 (by weight) 90 mins - 25 – 30mm 72°C
Please note:
A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.
S/S – straight sided metal pail for mixing machine extrusion and automated dispense
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 35 GPC_AUNZSEA_33_1021
Spabond™ 300 Series Code Selector
Spabond™ 335
Components Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability
Individual resin component size
Resin 20 kg SP335 RESIN 20KG S/S 6 F644-018 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 9.2 kg SP335 HARD FAST 9.2KG 100:46 (by weight) 1 F644-039 SPECIALIST
Standard 8.8 kg SP335 HARD STD 8.8KG 100:44 (by weight) 1 F644-036 SPECIALIST
Extra-slow 8.4 kg SP335 HARD X-SLOW 8.4KG 100:42 (by weight) 1 F644-037 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 20kg pail Spabond™ 335 Resin = 1 x 9.2kg pail Spabond™ 335 Fast Hardener
1 x 20kg pail Spabond™ 335 Resin = 1 x 8.8kg pail Spabond™ 335 Standard Hardener
1 x 20kg pail Spabond™ 335 Resin = 1 x 8.4kg pail Spabond™ 335 Ex-slow Hardener
Spabond™ 335 is not currently supplied in cartridges.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 36 GPC_AUNZSEA_33_1021
Spabond™ 340LV HT
Cartridges Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener cartridge pack sizes
HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20 1 F645-094 AU
HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 1 F645-046 SPECIALIST
HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 1 F645-095 AU/NZ
HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 1 F645-048 SPECIALIST
HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 1 F645-096 SPECIALIST
HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 1 F645-069 SPECIALIST
Spabond™ 340LV HT Cartridges are compatible with the following guns / mix-heads:
Description 400ml Availability
Pneumatic Dispensing Gun K215-039 SPECIALIST
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20) AU/NZ
Components Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Individual resin component size
Resin 200 kg SP340LV RESIN 200KG 1 F645-049 SPECIALIST
Resin 20 kg SP340LV RESIN 20KG S/S 6 F645-054 AU
Use the mix ratio to select recommended hardener component size
HT Fast 200 kg SP340 HARD FAST (HT) 200KG 100:49
(by weight)
1 F645-080 SPECIALIST
HT Fast 20 kg SP340 HARD FAST (HT) 20KG S/S 1 F645-078 SPECIALIST
HT Fast 10 kg SP340 HARD FAST (HT) 10KG 1 F645-097 AU
HT Slow 200 kg SP340 HARD SLOW (HT) 200KG 100:49
(by weight)
1 F645-071 SPECIALIST
HT Slow 20 kg SP340 HARD SLOW (HT) 20KG S/S 1 F645-072 SPECIALIST
HT Slow 10 kg SP340 HARD SLOW (HT) 10KG 1 F645-098 AU
HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG 100:47
(by weight)
1 F645-083 SPECIALIST
HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG S/S 1 F645-081 SPECIALIST
HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG 1 F645-099 SPECIALIST
Note that relative ordering quantities are as follows:
2 x 200kg pails Spabond™ 340LV Resin = 1 x 200kg pail Spabond™ 340LV HT Hardener
1 x 200kg pails Spabond™ 340LV Resin = 5 x 20kg pail Spabond™ 340LV HT Hardener
2 x 20kg pail Spabond™ 340LV Resin = 1 x 20kg pail Spabond™ 340LV HT Hardener
1 x 20kg pail Spabond™ 340LV Resin = 1 x 10kg pail Spabond™ 340LV HT Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 37 GPC_AUNZSEA_33_1021
Spabond™ 345
Cartridges Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Resin and hardener cartridge pack sizes
Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20 1 F646-016 SPECIALIST
Black Fast Pk 400 ml SP345 R/HFBL400ml CART/BOX 20 1 F646-024 AU/NZ
Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 1 F646-014 SPECIALIST
Spabond™ 345 Cartridges are compatible with the following guns / mix-heads:
Description 400ml Availability
Manual Dispensing Gun K215-021-3 AU/NZ
Pneumatic Dispensing Gun K215-022 SPECIALIST
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20) AU/NZ
Components Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Individual resin component size
Resin 20 kg SP345 RESIN 20KG S/S 6 F646-047 SPECIALIST Use the mix ratio to select recommended hardener component size
Fast 20 kg SP345 HARD FAST 20KG S/S 100:48
(by weight)
1 F646-049 SPECIALIST
Fast 9.6 kg SP345 HARD FAST 9.6KG 1 F646-041 SPECIALIST
Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG 1 F646-042 SPECIALIST
Slow 20 kg SP345 HARD SLOW 20KG S/S 100:48 (by weight)
1 F646-048 SPECIALIST
Slow 9.6 kg SP345 HARD SLOW 9.6KG 1 F646-043 SPECIALISTS
Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48 (by weight) 1 F646-044 SPECIALIST
Note that relative ordering quantities are as follows:
2 x 20kg pail Spabond™ 345 Resin = 1 x 20kg pail Spabond™ 345 Fast / Slow Hardener
1 x 20kg pail Spabond™ 345 Resin = 1 x 9.6 kg pail Spabond™ 345 Hardeners
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 38 GPC_AUNZSEA_33_1021
Spabond™ 500 Series Code Selector
Spabond™ 5-Minute
Cartridges Size Units Description Mix Ratio (R:H)
MOQ (Each) Order Code Availability
Resin and hardener pack sizes
Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 1 F652-021 AU Individual resin component size
Resin 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20 1 :1 (by volume)
1 F652-025 SPECIALIST
Hardener 310 ml SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 1 F652-027 SPECIALIST
Spabond™ 5-Minute Cartridges are compatible with the following guns / mix-heads / nozzles:
Description 310ml 400ml
Manual Dispensing Gun Please contact Gurit Technical Support
K215-021-3 AU/NZ
Pneumatic Dispensing Gun K215-022 SPECIALIST
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) Please contact Gurit Technical Support
A640-019 (bag of 20) AU/NZ
Spabond™ 568Spabond™ 568 Size Units Description Mix Ratio
(R:H) MOQ
(Each) Order Code Availability
Individual resin component size
Resin 17.5 kg SP568 RESIN 17.5KG 6 F654-023 SPECIALIST
Resin 10 kg SP568 RESIN 10KG (15.1L) 12 F654-021 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG S/S 100:44 (by weight)
1 F654-025 SPECIALIST
Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L 1 F654-022 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 17.5kg pail Spabond™ 568 Resin = 1 x 7.7kg pail Spabond™ 568 Ex-slow Hardener
1 x 10kg pail Spabond™ 568 Resin = 1 x 4.4kg pail Spabond™ 568 Ex-slow Hardener
Spabond™ 568 is not supplied in cartridges.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 39 GPC_AUNZSEA_33_1021
Spabond™ 540
Cartridges Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener cartridge pack sizes
Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12 1 F648-044 SPECIALIST
Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 1 F648-045 SPECIALIST
Slow Pack 600 ml SP540LV R/HSL 600ml CART/BOX OF 12 1 F648-054 SPECIALIST
Spabond™ 540 Cartridges are compatible with the following guns / mix-heads:
Description 600ml
Manual Dispensing Gun None
Pneumatic Dispensing Gun K215-050
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20)
Components Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Individual resin component size
Resin 200 kg SP540 RESIN 200KG 1 F648-042 SPECIALIST
Resin 20 kg SP540 RESIN 20KG S/S 6 F648-055 AU
LV Resin 20 kg SP540LV RESIN 20KG S/S 6 F648-050 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 19.0 kg SP540 HARD FAST 19.0KG S/S 100:95 (by weight) 9 F648-043 SPECIALIST
Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG S/S 100:92 (by weight)
7 F648-009 SPECIALIST
Standard 184 kg SP540 HARD STD 184KG 1 F648-033 SPECIALIST
Slow 18.6 kg SP540 SLOW HARDENER 18.6KG S/S 100:93 (by weight)
7 F648-051 AU
Slow 186 kg SP540 SLOW HARDENER 186KG 1 F648-038 SPECIALIST
Extra-slow 18.2 kg SP540 HARD EXTRA SLOW 18.2KG S/S 100:91 (by weight) 7 F648-056 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 200kg pail Spabond™ 540 Resin = 10 x 19kg pail Spabond™ 540 Fast Hardener
1 x 200kg pail Spabond™ 540 Resin = 1 x 184kg pail Spabond™ 540 Standard Hardener
1 x 200kg pail Spabond™ 540 Resin = 1 x 186kg pail Spabond™ 540 Slow Hardener
1 x 200kg pail Spabond™ 540 Resin = 10 x 18.2kg pail Spabond™ 540 Ex-Slow Hardener
1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.2kg pail Spabond™ 540 Standard Hardener
1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.4kg pail Spabond™ 540 Standard Hardener
1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.6kg pail Spabond™ 540 Slow Hardener
1 x 20kg pail Spabond™ 540/LV Resin = 1 x 18.2kg pail Spabond™ 540 Ex-Slow Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 40 GPC_AUNZSEA_33_1021
Spabond™ 545
Cartridges Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener cartridge pack sizes
Fast Pack 400 ml SPABOND 545 R/HF 400ml CARTS/BOX OF 20 2:1 (by volume)
1 F675-003 AUSlow Pack 400 ml SPABOND 545 R/HSL 400ml CARTS/BOX OF 20 1 F675-004 SPECIALIST
Spabond™ 545 Cartridges are compatible with the following guns / mix-heads:
Description 400ml Availability
Manual Dispensing Gun 400 ml K215-021-3 AU/NZ
Pneumatic Dispensing Gun K215-022 SPECIALIST
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20) AU/NZ
Components Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Individual resin component size
Resin 20 kg SPABOND 545 RESIN 20KG S/S 6 F675-005 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 18.8 kg SPABOND 545 FAST HARD 18.8KG S/S 100:47 (by weight) 9 F675-006 SPECIALIST
Slow 18.4 kg SPABOND 545 SLOW HARD 18.4KG S/S 100:46 (by weight) 7 F675-007 SPECIALIST
Note that relative ordering quantities are as follows:
2 x 20kg pail Spabond™ 545 Resin = 1 x 18.8kg pail Spabond™ 545 Fast Hardener
2 x 20kg pail Spabond™ 545 Resin = 1 x 18.4kg pail Spabond™ 545 Slow Hardener
Spabond™ 570
Components Size Units Description Mix Ratio (R:H) MOQ(Each)
Order Code Availability
Individual resin component size
Resin 20 kg SP570 RESIN 20KG S/S 6 F640-023 SPECIALIST
Resin 5 kg SP570 RESIN 5KG 15 F640-019 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 20 kg SP570 HARD STANDARD 20KG S/S
100:100 (by weight)
1 F640-024 SPECIALIST
Hardener 5 kg SP570 HARD STANDARD 5KG 1 F640-020 SPECIALIST
LV Hardener 20 kg SP570LV HARD STANDARD 20KG S/S 1 F640-026 SPECIALIST
LV Hardener 5 kg SP570LV HARD STANDARD 5KG 1 F640-025 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 20kg pail Spabond™ 570 Resin = 1 x 20kg pail Spabond™ 570 / LV Hardener
1 x 5kg pail Spabond™ 570 Resin = 1 x 5kg pail Spabond™ 570 / LV Hardener
Spabond™ 570 is not supplied in cartridges.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 41 GPC_AUNZSEA_33_1021
Spabond™ 700 Series Code Selector
Spabond™ 730
Cartridges Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Pack 400 ml SP730 R/H 400ml CART/BOX 20 1:1 (by volume) 1 F650-007 SPECIALIST
Spabond™ 730 Cartridges are compatible with the following guns / mix-heads:
Description 400ml
Manual Dispensing Gun K215-070
Pneumatic Dispensing Gun K215-022
Mix-heads (note that 1 mix-head per cartridge is supplied with each box) A640-019 (bag of 20)
Spabond™ 800 Series Code Selector
Spabond™ 820HTA
Components Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Individual resin component size
Resin 240 kg SPABOND 820 RESIN 240KG 1 F681-001 SPECIALIST
Resin 20 kg SPABOND 820 RESIN 20KG S/S 1 F681-003 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 220 kg SPABOND 820HTA HARD 220KG 100:34
(by weight)
1 F681-002 SPECIALIST
Hardener 20 kg SPABOND 820HTA HARD 20KG S/S 1 F681-004 SPECIALIST
Hardener 6.8 kg SPABOND 820HTA HARD 6.8KG 1 F681-005 SPECIALIST
Spabond™ 840HTA
Components Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Individual resin component size
Resin 220 kg SPABOND 840 RESIN 220KG 1 F680-009 SPECIALIST
Resin 20 kg SPABOND 840 RESIN 20KG S/S 1 F680-001 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 200 kg SPABOND 840HTA HARD 200KG 100:35
(by weight)
1 F680-010 SPECIALIST
Hardener 20 kg SPABOND 840HTA HARD 20KG S/S 1 F680-011 SPECIALIST
Hardener 7 kg SPABOND 840HTA HARD 7KG 1 F680-012 SPECIALIST
Note that relative ordering quantities are as follows:
3 x 240/220KG drum Spabond™ 800 Resin = 1 x 220/200KG drum Spabond™ 800 Hardener
1 x 240/220KG drum Spabond™ 800 Resin = 3 x 20KG pails Spabond™ 800 Hardener
3 x 20KG pails Spabond™ 800 Resin = 1 x 20KG pail Spabond™ 800 Hardener
1 x 20KG pails Spabond™ 800 Resin = 1 x 6.8/7KG pail Spabond™ 800 Hardener
Spabond™ 800 is intended for use with automated mixing machines & is not supplied in cartridges
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 42 GPC_AUNZSEA_33_1021
Liquid Systems
Gurit is a leading supplier of high performance epoxy products formulated to meet market and
customer needs. Gurit’s innovative approach and expertise in epoxy formulations continues to
deliver market leading products for a wide range of market segments. Gurit provides a complete
range of formulated products from in-mould gelcoats to multi-purpose systems.
Gurit manufactures a wide range of formulated resin products, based on epoxy, polyurethane
and vinylester chemistry. These formulations are unique combinations of chemicals that have
been blended together to yield products with characteristics optimised for their intended
application. The products have been extensively tested both for their handling and usage
characteristics, and for the properties that result from their curing.
The characteristics of thermosets mean that they can be formulated into a wide variety of forms,
with many different liquid-state properties and cured properties.
Gurit offers three types of liquid systems:
¬ Ampreg™ Laminating Systems - epoxy based liquids, low viscosity for good wet-out, high
strength and stiffness.
¬ AMPRO™ Multi-purpose Systems - epoxy based. Capable of performing as adhesives,
coatings, filling compounds and laminating systems.
¬ PRIME™ Resin Infusion Systems – low viscosity, high performance epoxy based liquids
ideal for vacuum bag infusion and resin transfer moulding process
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 43 GPC_AUNZSEA_33_1021
AMPRO™ Multi-Purpose Systems
The all new AMPRO™ multi-purpose epoxy system surpasses and supersedes Gurit’s legacy range of multi-purpose systems for wooden and composite boat builders.
All AMPRO™ systems have a simple resin to hardener mix ratio of 3:1 parts by volume.
Product Selector
System Properties at 25°C Mixed Viscosity*
150g Pot-Life* Tack-off Time* Earliest Sanding
Time*
AM
PR
O™
Sys
tem
Suitable for all general purpose applications including laminating, bonding, filling and coating.
AMPRO™ Resin
AMPRO™ Fast Hardener 1000 cP ½ hour 1 ½ hours 10 hours
AMPRO™ Slow Hardener 800 cP 1 ¼ hours 4 hours 20 hours
AMPRO™ Extra-slow Hardener 700 cP 1 ½ hours 5 hours 20 hours
AM
PR
O™
CLR
Sys
tem
Ideal for clear coating and laminating applications where colour is critical.
AMPRO™ Resin
AMPRO™ CLR Fast Hardener 1000 cP ½ hours 1 ½ hours 10 hours
AMPRO™ CLR Slow Hardener 750 cP 1 ¼ hours 4 hours 20 hours
AMPRO™ CLR Extra-slow Hardener 700 cP 1 ½ hours 5 hours 20 hours
AM
PR
O™
BIO
Sys
tem
Market leading, accredited >40% bio-content multi-purpose system suitable for laminating, bonding, filling and coating.
AMPRO™ BIO Resin
AMPRO™ Fast Hardener 1260 cP ½ hour 1 ¼ hours 20 hours
AMPRO™ Slow Hardener 1100 cP ¾ hour 4 ½ hours 20 hours
AMPRO™ Extra-slow Hardener 1050 cP 1 hour 6 hours 20 hours
AM
PR
O™
S
EA
L S
yste
m Solvent-free, low viscosity epoxy resin sealer for porous surfaces prior to coating and bonding.
AMPRO™ SEAL Resin AMPRO™ CLR Fast Hardener 270 cP ½ hour 3 hours 16 hours
AM
PR
O™
H
andi
pack
Solvent-free, low viscosity epoxy resin sealer for porous surfaces prior to coating and bonding.
AMPRO™ Resin AMPRO™ Fast Hardener 1000 cP ½ hours 1 ½ hours 10 hours
*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all AMPRO™ systems at 25°C. Please refer to thecorresponding page of this document for specific testing methods used.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 44 GPC_AUNZSEA_33_1021
Code Selector AMPRO™ Multi-purpose Epoxy System
AMPRO™ Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 6 x 1.33 kg AMPRO RES/HARD FAST 6x1.33KG PACK 1 F530-057 AU
Fast Pack 4.2 kg AMPRO R/H FAST 4.2KG PACK 1 F530-026 AU/NZ
Slow Pack 6 x 1.33 kg AMPRO RES/HARD SLOW 6x1.33KG PACK 1 F530-058 SPECIALIST
Slow Pack 4.2 kg AMPRO R/H SLOW 4.2KG PACK 1 F530-028 NZ
Extra-Slow Pack 6 x 1.33 kg AMPRO RES/HARD EXTRA-SLOW 6x1.33KG PACK 1 F530-059 AU
Extra-Slow Pack 4.2 kg AMPRO R/H EXTRA-SLOW 4.2KG PACK 1 F530-030 AU
Individual resin component size
Resin 1000 kg AMPRO RESIN 1000KG 1 F530-008 SPECIALIST
Resin 206 kg AMPRO RESIN 206KG 1 F530-007 AU
Resin 20 kg AMPRO RESIN 20KG 1 F530-006 AU/NZ
Resin 10 kg AMPRO RESIN 10KG 1 F530-005 AU
Use the mix ratio to select recommended hardener component size
Fast 200 kg AMPRO HARD FAST 200KG
100:29 (parts by weight)
1 F530-016 SPECIALIST
Fast 20 kg AMPRO HARD FAST 20KG 1 F530-015 AU
Fast 6 kg AMPRO HARD FAST 6KG 1 F530-014 NZ
Fast 3 kg AMPRO HARD FAST 3KG 1 F530-013 AU
Slow 200 kg AMPRO HARD SLOW 200KG 1 F530-020 SPECIALIST
Slow 20 kg AMPRO HARD SLOW 20KG 1 F530-019 SPECIALIST
Slow 6 kg AMPRO HARD SLOW 6KG 1 F530-018 NZ
Slow 3 kg AMPRO HARD SLOW 3KG 1 F530-017 SPECIALIST
Extra-Slow 200 kg AMPRO HARD EXTRA-SLOW 200KG 1 F530-024 SPECIALIST
Extra-Slow 20 kg AMPRO HARD EXTRA-SLOW 20KG 1 F530-023 AU
Extra-Slow 6 kg AMPRO HARD EXTRA-SLOW 6KG 1 F530-022 SPECIALIST
Extra-Slow 3 kg AMPRO HARD EXTRA-SLOW 3KG 1 F530-021 AU
AMPRO™ packs are compatible with the following calibrated pump sets:
Description 1.3 kg Packs 4 kg Packs Availability
AMPRO™ Pump Set K216-320 K216-321 AU
Note that relative ordering quantities are as follows:
2 x 1000KG IBC AMPRO™ Resin = 3 x 200KG drum AMPRO™ Hardener
3 x 200KG drum AMPRO™ Resin = 1 x 200KG drum AMPRO™ Hardener
1 x 200KG drum AMPRO™ Resin = 3 x 20KG pail AMPRO™ Hardener
1 x 20KG pail AMPRO™ Resin = 1 x 6KG pail AMPRO™ Hardener
1 x 10KG pail AMPRO™ Resin = 1 x 3KG pail AMPRO™ Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 45 GPC_AUNZSEA_33_1021
Code Selector AMPRO™ CLR Multi-purpose Epoxy System Ideal for Clear-coating
AMPRO™ CLR Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 6 x 1.33 kg AMPRO CLR RES/HARD FAST 6x1.33KG PK 1 F530-063 AU
Fast Pack 4.2 kg AMPRO CLR R/H FAST 4.2KG PACK 1 F530-050 AU
Slow Pack 6 x 1.33 kg AMPRO CLR RES/HARD SLOW 6x1.33KG PK 1 F530-064
Slow Pack 4.2 kg AMPRO CLR R/H SLOW 4.2KG PACK 1 F530-052
Extra-Slow Pack 6 x 1.33 kg AMPRO CLR RES/HARD EX-SLOW 6x1.33KG PACK 1 F530-065 AU
Extra-Slow Pack 4.2 kg AMPRO CLR R/H EXTRA-SLOW 4.2KG 1 F530-054 AU
Individual resin component size
Resin 1000 kg AMPRO RESIN 1000KG 1 F530-008 SPECIALIST
Resin 206 kg AMPRO RESIN 206KG 1 F530-007 AU
Resin 20 kg AMPRO RESIN 20KG 1 F530-006 AU/NZ
Resin 10 kg AMPRO RESIN 10KG 1 F530-005 AU
Use the mix ratio to select recommended hardener component size
Fast 200 kg AMPRO CLR HARD FAST 200KG
100:29 (parts by weight)
1 F530-040 SPECIALIST
Fast 20 kg AMPRO CLR HARD FAST 20KG 1 F530-039 SPECIALIST
Fast 6 kg AMPRO CLR HARD FAST 6KG 1 F530-038 SPECIALIST
Fast 3 kg AMPRO CLR HARD FAST 3KG 1 F530-037 AU
Slow 200 kg AMPRO CLR HARD SLOW 200KG 1 F530-044 SPECIALIST
Slow 20 kg AMPRO CLR HARD SLOW 20KG 1 F530-043 SPECIALIST
Slow 6 kg AMPRO CLR HARD SLOW 6KG 1 F530-042 SPECIALIST
Slow 3 kg AMPRO CLR HARD SLOW 3KG 1 F530-041 SPECIALIST
Extra-Slow 200 kg AMPRO CLR HARD EXTRA-SLOW 200KG 1 F530-048 SPECIALIST
Extra-Slow 20 kg AMPRO CLR HARD EXTRA-SLOW 20KG 1 F530-047 SPECIALIST
Extra-Slow 6 kg AMPRO CLR HARD EXTRA-SLOW 6KG 1 F530-046 SPECIALIST
Extra-Slow 3 kg AMPRO CLR HARD EXTRA-SLOW 3KG 1 F530-045 AU
AMPRO™ packs are compatible with the following calibrated pump sets:
Description 1.3 kg Packs 4 kg Packs Availability
AMPRO™ Pump Set K216-320 K216-321 AU
Note that relative ordering quantities are as follows:
2 x 1000KG IBC AMPRO™ Resin = 3 x 200KG drum AMPRO™ CLR Hardener
3 x 200KG drum AMPRO™ Resin = 1 x 200KG drum AMPRO™ CLR Hardener
1 x 200KG drum AMPRO™ Resin = 3 x 20KG pail AMPRO™ CLR Hardener
1 x 20KG pail AMPRO™ Resin = 1 x 6KG pail AMPRO™ CLR Hardener
1 x 10KG pail AMPRO™ Resin = 1 x 3KG pail AMPRO™ CLR Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 46 GPC_AUNZSEA_33_1021
Code Selector AMPRO™ BIO Multi-purpose Epoxy System
AMPRO™ BIO Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 6 x 1.3 kg AMPRO BIO RES/HARD FAST 6x1.30KG PK 1 F530-060 SPECIALIST
Fast Pack 4.1 kg AMPRO BIO R/H FAST 4.1KG PACK 1 F530-032 SPECIALIST
Slow Pack 6 x 1.3 kg AMPRO BIO RES/HARD SLOW 6x1.30KG PK 1 F530-061 SPECIALIST
Slow Pack 4.1 kg AMPRO BIO R/H SLOW 4.1KG PACK 1 F530-034 SPECIALIST
Extra-Slow Pack 6 x 1.3 kg AMPRO BIO RES/HARD EX-SLOW 6x1.30KG PACK 1 F530-062 SPECIALIST
Extra-Slow Pack 4.1 kg AMPRO BIO R/H EXTRA-SLOW 4.1KG 1 F530-036 SPECIALIST
Individual resin component size
Resin 1000 kg AMPRO BIO RESIN 1000KG 1 F530-012 SPECIALIST
Resin 200 kg AMPRO BIO RESIN 200KG 1 F530-011 SPECIALIST
Resin 20 kg AMPRO BIO RESIN 20KG 1 F530-010 SPECIALIST
Resin 10 kg AMPRO BIO RESIN 10KG 1 F530-009 SPECIALIST
Use the mix ratio to select recommended hardener component size
Fast 200 kg AMPRO HARD FAST 200KG
100:30 (parts by weight)
1 F530-016 SPECIALIST
Fast 20 kg AMPRO HARD FAST 20KG 1 F530-015 SPECIALIST
Fast 6 kg AMPRO HARD FAST 6KG 1 F530-014 SPECIALIST
Fast 3 kg AMPRO HARD FAST 3KG 1 F530-013 SPECIALIST
Slow 200 kg AMPRO HARD SLOW 200KG 1 F530-020 SPECIALIST
Slow 20 kg AMPRO HARD SLOW 20KG 1 F530-019 SPECIALIST
Slow 6 kg AMPRO HARD SLOW 6KG 1 F530-018 SPECIALIST
Slow 3 kg AMPRO HARD SLOW 3KG 1 F530-017 SPECIALIST
Extra-Slow 200 kg AMPRO HARD EXTRA-SLOW 200KG 1 F530-024 SPECIALIST
Extra-Slow 20 kg AMPRO HARD EXTRA-SLOW 20KG 1 F530-023 SPECIALIST
Extra-Slow 6 kg AMPRO HARD EXTRA-SLOW 6KG 1 F530-022 SPECIALIST
Extra-Slow 3 kg AMPRO HARD EXTRA-SLOW 3KG 1 F530-021 SPECIALIST
AMPRO™ packs are compatible with the following calibrated pump sets:
Description 1.3 kg Packs 4 kg Packs
AMPRO™ Pump Set K216-320 K216-321
Note that relative ordering quantities are as follows:
2 x 1000KG IBC AMPRO™ BIO Resin = 3 x 200KG drum AMPRO™ Hardener
3 x 200KG drum AMPRO™ BIO Resin = 1 x 200KG drum AMPRO™ Hardener
1 x 200KG drum AMPRO™ BIO Resin = 3 x 20KG pail AMPRO™ Hardener
1 x 20KG pail AMPRO™ BIO Resin = 1 x 6KG pail AMPRO™ Hardener
1 x 10KG pail AMPRO™ BIO Resin = 1 x 3KG pail AMPRO™ Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 47 GPC_AUNZSEA_33_1021
Code Selector AMPRO™ SEAL Multi-purpose Epoxy System
AMPRO™ SEAL Size Units Description MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 6 x 1.3 kg AMPRO SEAL R/H CLR FAST 6X1.30KG PACK 1 F530-069 SPECIALIST
Fast Pack 4.1 kg AMPRO SEAL R/H CLR FAST 4.1KG PACK 1 F530-070 SPECIALIST
Slow Pack 6 x 1.3 kg AMPRO SEAL R/H CLR SLOW 6X1.30KG PACK 1 F530-067 SPECIALIST
Slow Pack 4.1 kg AMPRO SEAL R/H CLR SLOW 4.1KG PACK 1 F530-068 SPECIALIST
AMPRO™ packs are compatible with the following calibrated pump sets:
Description 1.3 kg Packs 4 kg Packs
AMPRO™ Pump Set K216-320 K216-321
AMPRO™ Handipack Multi-purpose Epoxy System
AMPRO™ SEAL Size Units Description MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 12 x 0.375 kg AMPRO HANDIPACK R/H+PUMPS 375g BOX OF 12 1 F530-071 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 48 GPC_AUNZSEA_33_1021
Ampreg™ Laminating Systems
The Ampreg™ wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.
Product Selector
System Properties At 25°C Mixed Viscosity*
150g Pot-Life*
Earliest Time To Apply Vacuum*
Latest Time To Apply Vacuum*
Earliest De-mould Time*
Am
preg
™ 3
0 R
esin
Low initial mixed viscosity & good cure progression from ambient only cures, DNV-GL & Lloyd’s Register Certified, Replaces Ampreg™ 21
Ampreg™ 3X Fast Hardener 900 cP ½ hour 1 ½ hours 2 hours 3 hours
Ampreg™ 3X Standard Hardener 750 cP 1 hour 2 ½ hours 3 hours 6 ½ hours
Ampreg™ 3X Slow Hardener 350 cP 4 hours 4 hours 5 hours 16 hours
Ampreg™ 3X Extra-slow Hardener 300 cP 7 hours 6 hours 7 ½ hours 40 hours
Ampreg 3X High Tg Hardener 820 cP 8½ hour 7 ¼ hours 9 ¼ hours 60 hours
Am
preg
™ 3
1 R
esin
Viscosity optimised for good fabric wet-out and drainage resistance, DNV-GL & Lloyd’s Register Certified, Replaces Ampreg™ 22
Ampreg™ 3X Fast Hardener 1300 cP ½ hour 1 ¼ hours 1 ¾ hours 2 ¾ hours
Ampreg™ 3X Standard Hardener 1000 cP 1 hour 2 hours 2 ¾ hours 5 hours
Ampreg™ 3X Slow Hardener 500 cP 3 ½ hours 3 ¼ hours 4 ¼ hours 12 hours
Ampreg™ 3X Extra-slow Hardener 400 cP 6 hours 4 ¼ hours 5 ½ hours 20 hours
Ampreg 3X High Tg Hardener 1110 cP 5 ¾ hour 4 ¾ hours 6 ¾ hours 30 hours
Am
preg
™ 3
6 R
esin
Improved fabric impregnation, Faster mechanical property generation, High flexural properties, Replaces Ampreg™ 26
Ampreg™ 3X Fast Hardener 700 cP ½ hour 1 ½ hours 2 hours 2 ¾ hours
Ampreg™ 3X Standard Hardener 450 cP 1 hour 2 ¼ hours 3 hours 5 ¾ hours
Ampreg™ 3X Slow Hardener 275 cP 3 ½ hours 3 ½ hours 4 ½ hours 13 hours
Ampreg™ 3X Extra-slow Hardener 200 cP 6 hours 4 ¾ hours 5 ¾ hours 21 hours
Am
preg
™ 3
X
Anc
illar
ies Ampreg™ 3X Thixotropic Pregel Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating
resins for applications where resin drainage is a concern. Refer to product datasheet for more information.
Ampreg™ F230-2 Foaming Epoxy Ampreg F230-2 is a three-part foaming epoxy system using Ampreg 3X hardeners. The final density of the cured product can be controlled by the careful addition of the Foaming Agent, although the product is optimised to the 150 – 300kg/m³ range.
*working time properties are highly subjective to ambient conditions and should be used as an approximate guideline for all Ampreg™ systems at 25°C. Please refer to thecorresponding page of this document for specific testing methods used.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 49 GPC_AUNZSEA_33_1021
Ampreg™ 3X Code Selector
Packs Size Units Description Mix
Ratio (R:H)
MOQ (Each)
OrderCode Availability
Ampreg™ 30 resin and hardener pack sizes
Fast Pack 1.26 kg AMPREG30 R/H FAST 1.26KG PACK 10 F127-035 SPECIALIST
Fast Pack 4.66 kg AMPREG30 R/H FAST 4.66KG PACK 10 F127-034 SPECIALIST
Standard Pack 1.26 kg AMPREG30 R/H STANDARD 1.26KG PACK 10 F127-037 SPECIALIST
Standard Pack 4.66 kg AMPREG30 R/H STANDARD 4.66KG PACK 10 F127-036 SPECIALIST
Slow Pack 1.26 kg AMPREG30 R/H SLOW 1.26KG PACK 10 F127-039 SPECIALIST
Slow Pack 4.66 kg AMPREG30 R/H SLOW 4.66KG PACK 10 F127-038 SPECIALIST
Extra-slow Pack 1.26 kg AMPREG30 R/H EXTRA-SLOW 1.26KG PACK 10 F127-041 SPECIALIST
Extra-slow Pack 4.66 kg AMPREG30 R/H EXTRA-SLOW 4.66KG PACK 10 F127-040 SPECIALIST
Ampreg™ 31 resin and hardener pack sizes
Fast Pack 1.26 kg AMPREG31 R/H FAST 1.26KG PACK 10 F127-071 AU
Fast Pack 4.66 kg AMPREG31 R/H FAST 4.66KG PACK 10 F127-072 AU
Standard Pack 1.26 kg AMPREG31 R/H STANDARD 1.26KG PACK 10 F127-075 SPECIALIST
Standard Pack 4.66 kg AMPREG31 R/H STANDARD 4.66KG PACK 10 F127-076 SPECIALIST
Slow Pack 1.26 kg AMPREG31 R/H SLOW 1.26KG PACK 10 F127-073 AU
Slow Pack 4.66 kg AMPREG31 R/H SLOW 4.66KG PACK 10 F127-074 AU
Extra-slow Pack 1.26 kg AMPREG31 R/H EXTRA-SLOW 1.26KG PACK 10 F127-069 SPECIALIST
Extra-slow Pack 4.66 kg AMPREG31 R/H EXTRA-SLOW 4.66KG PACK 10 F127-070 SPECIALIST
Ampreg™ 36 resin and hardener pack sizes
Fast Pack 1.16 kg AMPREG36 R/H FAST 1.16KG PACK 10 F127-083 SPECIALIST
Fast Pack 4.26 kg AMPREG36 R/H FAST 4.26KG PACK 10 F127-084 SPECIALIST
Standard Pack 1.16 kg AMPREG36 R/H STANDARD 1.16KG PACK 10 F127-087 SPECIALIST
Standard Pack 4.26 kg AMPREG36 R/H STANDARD 4.26KG PACK 10 F127-088 SPECIALIST
Slow Pack 1.16 kg AMPREG36 R/H SLOW 1.16KG PACK 10 F127-085 SPECIALIST
Slow Pack 4.26 kg AMPREG36 R/H SLOW 4.26KG PACK 10 F127-086 SPECIALIST
Extra-slow Pack 1.16 kg AMPREG36 R/H EXTRA-SLOW 1.16KG PACK 10 F127-081 SPECIALIST
Extra-slow Pack 4.26 kg AMPREG36 R/H EXTRA-SLOW 4.26KG PACK 10 F127-082 SPECIALIST
Resins Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Ampreg™ 30 Individual resin component size
Resin 1000 kg AMPREG30 RESIN 1000KG 100:26
(parts by weight)
1 F127-001 SPECIALIST
Resin 219 kg AMPREG30 RESIN 219KG 1 F127-002 SPECIALIST
Resin 18 kg AMPREG30 RESIN 18KG 6 F127-003 SPECIALIST
Ampreg™ 31 Individual resin component size
Resin 1000 kg AMPREG31 RESIN 1000KG 100:26
(parts by weight)
1 F127-077 SPECIALIST
Resin 219 kg AMPREG31 RESIN 219KG 1 F127-079 AU
Resin 18 kg AMPREG31 RESIN 18KG 6 F127-078 AU/NZ
Ampreg™ 36 Individual resin component size
Resin 900 kg AMPREG36 RESIN 900KG 100:29
(parts by weight)
1 F127-096 SPECIALIST
Resin 197 kg AMPREG36 RESIN 197KG 1 F127-090
Resin 16.2 kg AMPREG36 RESIN 16.2KG 6 F127-089
Ampreg™ 3X Thixotropic Pregel Individual resin component size
Resin 195 kg AMPREG3X THIXOTROPIC PREGEL 195KG Refer to TDS
1 F127-092 SPECIALIST
Resin 19.5 kg AMPREG3X THIXOTROPIC PREGEL 19.5KG 6 F127-091 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 50 GPC_AUNZSEA_33_1021
Hardeners Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Use the mix ratio to select recommended hardener component size or refer to guidance below.
Fast 174 kg AMPREG3X HARD FAST 174KG 1 F127-006 SPECIALIST
Fast 19 kg AMPREG3X HARD FAST 19KG 1 F127-007 AU
Fast 19 kg AMPREG3X HARD FAST 19KG A/F 1 F127-008 SPECIALIST
Fast 4.68 kg AMPREG3X HARD FAST 4.68KG A/F 1 F127-010 AU
Standard 174 kg AMPREG3X HARD STANDARD 174KG 1 F127-013 SPECIALIST
Standard 19 kg AMPREG3X HARD STANDARD 19KG 1 F127-014 SPECIALIST
Standard 19 kg AMPREG3X HARD STANDARD 19KG A/F 1 F127-015 SPECIALIST
Standard 4.68 kg AMPREG3X HARD STANDARD 4.68KG A/F 1 F127-017 SPECIALIST
Slow 174 kg AMPREG3X HARD SLOW 174KG 1 F127-020 SPECIALIST
Slow 19 kg AMPREG3X HARD SLOW 19KG 1 F127-021 AU
Slow 19 kg AMPREG3X HARD SLOW 19KG A/F 1 F127-022 SPECIALIST
Slow 4.68 kg AMPREG3X HARD SLOW 4.68KG A/F 1 F127-024 AU/NZ
Extra-slow 174 kg AMPREG3X HARD EXTRA-SLOW 174KG 1 F127-027 SPECIALIST
Extra-slow 19 kg AMPREG3X HARD EXTRA-SLOW 19KG 1 F127-028 AU
Extra-slow 19 kg AMPREG3X HARD EXTRA-SLOW 19KG A/F 1 F127-029 SPECIALIST
Extra-slow 4.68 kg AMPREG3X HARD EXTRA-SLOW 4.68KG A/F 1 F127-031 SPECIALIST
High Tg 194 kg AMPREG3X HIGH Tg HARDENER 194KG 1 F127-066 SPECIALIST
High Tg 16 kg AMPREG3X HIGH Tg HARDENER 16KG 1 F127-065 SPECIALIST
High Tg 5.22 kg AMPREG3X HIGH Tg HARDENER 5.22KG 1 F127-095 SPECIALIST
Note that relative ordering quantities are as follows:
2 x 1000kg Ampreg™ 30 / 31 Resin = 3 x 174kg Ampreg™ 3X Fast – Ex-Slow Hardeners
2 x 1000kg Ampreg™ 30 / 31 Resin = 3 x 194kg Ampreg™ 3X High Tg Hardener
2 x 900kg Ampreg™ 36 Resin = 3 x 174kg Ampreg™ 3X Fast – Ex-Slow Hardeners
1 x 219kg Ampreg™ 30 / 31 Resin = 3 x 19kg Ampreg™ 3X Fast – Ex-Slow Hardeners
1 x 219kg Ampreg™ 30 / 31 Resin = 4 x 16.2kg Ampreg™ 3X High Tg Hardener
1 x 197kg Ampreg™ 36 Resin = 3 x 19kg Ampreg™ 3X Fast – Ex-Slow Hardeners
1 x 18kg Ampreg™ 30 / 31 Resin = 1 x 4.68kg Ampreg™ 3X Fast – Ex-Slow Hardeners
1 x 18kg Ampreg™ 30 / 31 Resin = 1 x 5.22kg Ampreg™ 3X High Tg Hardener
1 x 16.2kg Ampreg™ 36 Resin = 1 x 4.68kg Ampreg™ 3X Fast – Ex-Slow Hardeners
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 51 GPC_AUNZSEA_33_1021
Ampreg™ 3X Ancillaries Code Selector Ampreg™ 3X Thixotropic Pregel
Resins Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Ampreg™ 3X Thixotropic Pregel Individual resin component size
Resin 195 kg AMPREG3X THIXOTROPIC PREGEL 195KG Refer to TDS
1 F127-092 SPECIALIST
Resin 19.5 kg AMPREG3X THIXOTROPIC PREGEL 19.5KG 6 F127-091 SPECIALIST
Ampreg 3X Series Thixotropic Pregel can be used with Ampreg 30, 31 & 36 resins and in conjunction with Ampreg 3X Series hardeners to modify the thixotropy, resistance to flow and drain, of these systems. It is normally used as a percentage of the total mix, the Ampreg 3X Thixotropic Pregel being blended with the parent systems resin before the addition of the parent systems hardener. Please refer to the product datasheet for further information.
Ampreg™ F230-2 Foaming Epoxy
Resins Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Ampreg™ F230-2 Individual resin component size
Resin 21.5 kg AMPREG F230-2 RESIN 21.5KG Refer to TDS 1 F113-010 SPECIALIST
H/FA Packs Size Units Description Mix Ratio (R:H)
MOQ (Each)
Order Code Availability
Ampreg™ F230-2 hardener and foaming agent pack sizes
Slow Pack 4.88 kg AMPREG F230-2 H/FA SLOW 4.88KG PACK A/F
Refer to TDS 10 F113-011 SPECIALIST
Note that relative ordering quantities are as follows: 1 x 21.5kg F230-2 Resin = 1 x 4.88kg F230-2 Slow Hardener & Foaming Agent
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 52 GPC_AUNZSEA_33_1021
PRIME™ Infusion Systems
The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.
PRIME™ 27 is suitable for the female moulding of large, complex components incorporating advanced fibres such as carbon* and aramid. Typical projects include spars, hulls and reinforcing structures.
PRIME™ 27 offers outstanding performance in a variety of liquid infusion processes including SCRIMP, RIFT (resin infusion under flexible tooling), VARTM (vacuum assisted resin transfer moulding) and RTM (resin transfer moulding).
PRIME™ 27 resin uses a wide range of hardeners to give a range of working times and cure speeds. This enables the gel time of the resin to be closely matched to the required infusion time for any particular size of moulded part. It achieves excellent mechanical and physical properties, including a high Tg from a moderate (50°) post-cure.
The system has an exceptionally low exotherm characteristic, which allows thick sections to be manufactured without risk of premature gelation due to exothermic heat build-up. This low exotherm will also extend the life of the mould tools.
Product Selector
System Properties At 20°C** Mixed Viscosity**
150g Gel-Time**
Latest Flow Under Vacuum**
Earliest Vacuum-Off Time**
Earliest De-mould Time**
PR
IME
TM 27
Res
in
Fast Hardener 260 - 280 1 hour 2 ¾ hours 4 hours 5 hours
Slow Hardener 265 - 285 4 ¾ hours 5 hours 11 hours 17 hours
Extra-slow Hardener 250 - 270 10 ½ hours 9 ½ hours 29 hours Not recommended without a post-cure
High Tg Hardener 500 - 520 5 hours - - Not recommended without a post-cure
*unidirectional carbon fibre is acknowledged difficult to infuse. Please contact a member of technical team before attempting a carbon infusion with PRIMETM 27. **working time properties are highly subjective to ambient conditions and should be used as approximate guideline for all PRIMETM 27 systems at 20°C.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 53 GPC_AUNZSEA_33_1021
Code Selector
PRIME™ 27 Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Resin and hardener pack sizes
Fast Pack 4 kg PRIME27 R/H FAST 4KG PACK 10 F160-100 SPECIALIST
Slow Pack 4 kg PRIME27 R/H SLOW 4KG PACK 10 F160-098 SPECIALIST
Individual resin component size
Resin 1000 kg PRIME27 RESIN 1000KG 1 F160-043 SPECIALIST
Resin 214 kg PRIME27 RESIN 214KG 3 F160-041 AU/NZ
Resin 18.6 kg PRIME27 RESIN 18.6KG 6 F160-057 AU/NZ
Use the mix ratio to select recommended hardener component size
Fast 900 kg PRIME HARD FAST 900KG
100:28 (by weight)
1 F160-072 SPECIALIST
Fast 180 kg PRIME HARD FAST 180KG 1 F160-018 SPECIALIST
Fast 20 kg PRIME HARD FAST 20KG 1 F160-015 AU
Fast 5.2 kg PRIME HARD FAST 5.2KG 1 F160-053 AU
Fast 5.2 kg PRIME HARD FAST 5.2KG A/F 1 F160-096 SPECIALIST
Slow 900 kg PRIME HARD SLOW 900KG
100:28 (by weight)
1 F160-045 SPECIALIST
Slow 180 kg PRIME HARD SLOW 180KG 1 F160-032 SPECIALIST
Slow 20 kg PRIME HARD SLOW 20KG 1 F160-031 AU/NZ
Slow 5.2 kg PRIME HARD SLOW 5.2KG 1 F160-054 AU/NZ
Slow 5.2 kg PRIME HARD SLOW 5.2KG A/F 1 F160-094 SPECIALIST
Extra-slow 900 kg PRIME HARD EX-SLOW 900KG
100:28 (by weight)
1 F160-033 SPECIALIST
Extra-slow 180 kg PRIME HARD EX-SLOW 180KG 1 F160-028 SPECIALIST
Extra-slow 20 kg PRIME HARD EX-SLOW 20KG 1 F160-027 SPECIALIST
Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG 1 F160-055 SPECIALIST
High Tg 178 kg PRIME HIGH Tg HARDENER 178KG
100:25 (by weight)
1 F160-089 SPECIALIST
High Tg 17.8 kg PRIME HIGH Tg HARDENER 17.8KG 1 F160-088 SPECIALIST
High Tg 8.8 Kg PRIME HIGH tg HARDENER 8.8kg 1 F160-087 AU
High Tg 4.7 kg PRIME HIGH Tg HARDENER 4.7KG 1 F160-102 SPECIALIST
Note that relative ordering quantities are as follows:
3 x 1000kg PRIME™ 27 Resin = 1 x 900kg PRIME™ Fast / Slow / Ex-slow Hardener
2 x 1000kg PRIME™ 27 Resin = 3 x 180kg PRIME™ Fast / Slow / Ex-slow Hardener
2 x 1000kg PRIME™ 27 Resin = 3 x 178kg PRIME™ High Tg Hardener
1 x 214kg PRIME™ 27 Resin = 3 x 20kg PRIME™ Fast / Slow / Ex-slow Hardener
1 x 214kg PRIME™ 27 Resin = 3 x 17.8kg PRIME™ High Tg Hardener
1 x 18.6kg PRIME™ 27 Resin = 1 x 5.2kg PRIME™ Fast / Slow / Ex-slow Hardener
1 x 18.6kg PRIME™ 27 Resin = 1 x 4.7kg PRIME™ High Tg Hardener
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 54 GPC_AUNZSEA_33_1021
Filled Systems
Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs. Gurit’s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems.
Gurit manufactures a wide range of formulated resin products, based on epoxy, polyurethane and vinylester chemistry. These formulations are unique combinations of chemicals that have been blended together to yield products with characteristics optimised for their intended application. The products have been extensively tested both for their handling and usage characteristics, and for the properties that result from their curing.
The characteristics of thermosets mean that they can be formulated into a wide variety of forms, with many different liquid-state properties and cured properties.
Gurit offers two types of filled systems:
¬ Filling and Fairing Compounds - epoxy based pastes, high adhesive ability and durability.
¬ In-mould Process Coats - epoxy process coats for in-mould application to achieve a defect free surface ready for sanding and painting
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 55 GPC_AUNZSEA_33_1021
Filling and Fairing
Gurit’s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sand-ability and compatibility with a wide range of primers.
S-Fill 15 Minute Epoxy Filler SystemGurit’s S-Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sand-ability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties.
S-Fair 600 Epoxy Fairing SystemS-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing largecomposite and metal structures such as hulls and decks. It can be applied up to a thickness of35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primersand top coats typically used in the marine market for the finishing of yachts. It is available withtwo hardeners; Fast and Standard, which enables the customer to tailor the working/cure timeto the ambient workshop temperature.
Code Selector S-Fill 15 Min Size Units Description Mix Ratio (R:H) MOQ
(Each) Order Code Availability
Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK 10 F930-006 SPECIALIST
S-Fair 600 Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability
Individual resin component size
Resin 10 litres S FAIR 600 RESIN 10L 12 F920-003 AU Resin 2.5 litres S FAIR 600 RESIN 2.5L 15 F920-001 AU
Use the mix ratio to select recommended hardener component size
Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 (by volume)
10 F920-110 AU Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L 1 F920-111 AU
Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 (by volume)
10 F920-004 AU Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L 1 F920-002 AU
Note that relative ordering quantities are as follows:
1 x 10L S-Fair 600 Resin = 1 x 10L S-Fair Fast / Standard Hardeners
1 x 2.5L S-Fair 600 Resin = 1 x 2.5L S-Fair Fast / Standard Hardeners
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 56 GPC_AUNZSEA_33_1021
In-Mould Process Coats
Our coating products are hard wearing and versatile partners for the prepreg and infusion systems. Available in solvent-free formulations, Gurit's in-mould process coats are suitable for a range of applications and industries.
System Description Hardener Speed Mix ratio Intended Application
CR 3400
Easy to sand, in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme.
Standard 5 hours 100:30 (parts by weight)
Designed to be backed up with Ampreg laminating systems and Prime infusion systems to give a sand-able surface ready for painting.
Code Selector
CR 3400 In-mould Process Coat
CR 3400 Size Units Description Mix Ratio (R:H) MOQ (Each) Order Code Availability
Resin and hardener pack sizes
Pack 6.5 kg CR3400 RES/HARD STD 6.5KG PK 1 F346-012 SPECIALIST
Individual resin and hardener components
Resin 19 kg CR3400 RESIN 19KG 100:30 (by weight)
1 F346-013 SPECIALIST
Hardener 5.7 kg CR3400 HARD STD 5.7KG 1 F346-015 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 57 GPC_AUNZSEA_33_1021
Tooling Systems
Gurit's formulated product range for tooling operations consists of a range of ambient curing mould materials that can be used up to an operating temperature of up to 160°C.
Product Selector
Type Product Operating Temperature Description
Gelcoats T-Gel 130-1 130°C T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbonreinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130⁰C / 265⁰F tooling laminating, infusion and repair materials.
Laminating Systems T-Lam 130-1 130°C T-Lam 130-1 is an epoxy tooling system designed for wet laminating glass or carbonmoulds. T-Lam 130-1 is compatible with T-Prime 130-1.
Infusion Systems
T-Prime 130-1 130°C T-Prime 130-1 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam 130-1 laminating.
T-Prime 160 160°C T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass andcarbon moulds.
Only our formulated products for tooling applications are shown on this page. Please see the separate documentation of the Tooling business unit for plugs, moulds for wind turbine blades and welded transport systems on www.gurit.com
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 58 GPC_AUNZSEA_33_1021
Code Selector
Gelcoats
Laminating Systems
T-Lam 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Resin 20 kg T-LAM 130-1 RESIN 20KG 100:40 (by weight)
6 F140-202 SPECIALIST
Hardener 8 kg T-LAM 130-1 HARDENER 8KG 1 F140-205 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 20kg T-LAM 130-1 Resin = 1 x 8kg T-LAM 130-1 Hardener
Infusion Systems
T-Prime 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Individual resin component size
Resin 185 kg T-PRIME 130-1 RESIN 185KG 1 F163-100 SPECIALIST
Resin 12.5 kg T-PRIME 130-1 RESIN 12.5KG 2 F163-102 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 16.7 kg T-PRIME 130-1 HARD 16.7KG100:27 (by weight)
1 F163-106 SPECIALIST
Hardener 3.4 kg T-PRIME 130-1 HARD 3.4KG 1 F163-103 SPECIALIST
Note that relative ordering quantities are as follows:
1 x 185kg T-PRIME 130-1 Resin = 3 x 16.7kg T-PRIME 130-1 Hardener
1 x 12.5kg T-PRIME 130-1 Resin = 1 x 3.4kg T-PRIME 130-1 Hardener
T-Prime 160 Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Individual resin component size
Resin 200 kg T-PRIME 160 RESIN 200KG 1 F166-003 SPECIALIST
Resin 20 kg T-PRIME 160 RESIN 20KG 6 F166-005 SPECIALIST
Use the mix ratio to select recommended hardener component size
Hardener 180 kg T-PRIME 160 HARDENER 180KG100:35 (by weight)
1 F166-009 SPECIALIST
Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F 1 F166-008 SPECIALIST
Note that relative ordering quantities are as follows:
3 x 200kg T-PRIME 160 Resin = 1 x 180kg T-PRIME 160 Hardener
3 x 20kg T-PRIME 160 Resin = 1 x 17.5kg T-PRIME 160 Hardener
T-Gel 130-1 Size Units Description Mix Ratio (R:H) MOQ (Each)
Order Code Availability
Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK 100:49 (by weight) 3 F340-112 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 59 GPC_AUNZSEA_33_1021
Reinforcements
Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations and incorporate a variety of construction techniques in their manufacture.
Our range of Reinforcements is presented by fibre type:
¬ Glass Products – E Glass
¬ Carbon Products
¬ Flax Natural Fibre Products
¬ Hybrid combinations of the above fibres
Then sub-divided into the following categories, based on the orientations of the primary structural fibres / tows :
¬ Unidirectional Fabrics – A variety of construction styles with all structural fibres generallyrunning at 0° where optimum mechanical properties or local reinforcement is required. The Style is generally Unitex (‘UT’) which offers a balance of handling properties.
¬ Woven Fabrics – A wide range of woven fabrics, available in plain, twill and satin weaveformations with fibres at 0°/90°.
¬ Multiaxial Fabrics – Stitched construction with fibres at +/-45° or 0°/90° (Double Bias),0°/+45°/-45° (Triaxial) and 0°/+45°/-45°/90° (Quadraxial). These products offer excellent mechanical properties, and have optimised fibre spread for high laminate quality.
¬ Tapes – Narrow (< 200mm) fabric versions of the above Availability The supply of dry reinforcements is subject to a minimum single roll quantity per style for most items. Smaller quantities of fabric are available from Gurit’s network of distributors, subject to cutting and handling charges.
This catalogue describes Gurit’s standard range of reinforcement materials. If your preferred reinforcement is not listed in the following pages, please contact Gurit, as we can offer alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard items may be subject to limited availability. Width availability may change from time to time.
For further information, confirmation of stock levels and technical advice on Gurit’s reinforcement materials - please contact your local Customer Support Team.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 60 GPC_AUNZSEA_33_1021
Reinforcement Nomenclature
1st Letter: General Construction of Reinforcement Fabric
WR = Woven rovings - (glass)
R = Woven fabric - yarn (glass) or tows (carbon)
X = Double bias (±45°) stitched fabric
Q = Quadraxial (0°/90°/±45°) stitched fabric
Y = Triaxial (0°/±45°) stitched fabric
UT = Unitex woven low-crimp unidirectional fabric
UF = Unifibre non-woven unidirectional fabric
2nd Letter: Fibre Type (or Major Component in Hybrid)
E = E glass
S = S glass (or R glass)
C = Carbon
F = Flax
3rd letter: 2nd Fibre Type - Minor Component in Hybrid (as above);
also: (when present) T = Tape version
Final digit: Identifier to distinguish otherwise similar fabrics.
Suffix letter: For woven fabrics, the following suffixes indicate the weave:
P = Plain
T = 2x2 twill
S = 3x1 twill
T4 = 4x4 twill
Hx = Satin (where x = harness number)
C = Crowsfoot
B = Basket
Q = Quadran
Example: UT-C300/500
UD carbon in Unitex Approximate reinforcement weight 300g/m2
Width 500mm
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 61 GPC_AUNZSEA_33_1021
Carbon Reinforcements Code Selector
Description Weight (g/m2)
Width (mm)
Length (lm)
Quantity UoM Order code Availability
+ 45° Double Bias Stitched Fabrics
XC101 100 1270 100 127 M2 R123-100-3 AU/NZ
XC151 150 1270 100 127 M2 R123-100-2 AU/NZ
XC200 200 1270 100 127 M2 6223 AU/NZ
XC300 300 1270 100 127 M2 R123-075 SPECIALIST
XC310 310 1270 100 127 M2 6232C AU/NZ XC411 400 150 100 100 M2 6249A NZ XC411 400 200 100 100 M2 6249B NZ
XC411 400 100 100 100 M2 6252A NZ
XC411 400 1270 100 127 M2 6251C AU/NZ
0/90° Woven Reinforcements
RC155T 155 1000 100 100 M2 R113-001-3 NZ
RC160P 160 1200 100 120 M2 6274 SPECIALIST
RC200P 200 1270 100 127 M2 R113-007-9 AU/NZ
RC200T 199 1270 100 127 M2 R113-013-3 AU/NZ
RC200WST 195 1270 100 127 M2 R113-013-5 AU
RC203WSP 200 1000 100 100 M2 R113-112-2 AU/NZ
RC241T 241 1200 100 120 M2 R113-013-7 AU/NZ
RC416T 416 1270 39.4 50 M2 R113-083 AU
RC600T 600 1500 50 75 M2 6296 AU
Unidirectional Reinforcement Fabrics
UC300 300 600 50 30 M2 6231D NZ
UC450 450 600 50 30 M2 6350C NZ
UT-C200 200 500 150 75 M2 R163-039-2 AU/NZ
UT-C300 200 500 100 50 M2 6344 AU/NZ
UT-C450 450 500 100 50 M2 6351 AU/NZ Unidirectional Reinforcement Tapes
Non-crimp plain weave type (Unix) in carbon Typical uses for these tapes are in the local reinforcement of predominantly glass composite structures, where the load paths are known.
RUCT170(3K) 195 65 50 1 EA R163-006-2 AU
RUCT170(3K) 195 65 50 1 EA R163-006-2W AU
RUCT480 480 100 50 1 EA 6353G AU
Other Carbon Reinforcements
BC510 510 1270 50 63.5 M2 6204C NZ
CSOX241 241 101.6 LM 6403 AU
CSOX244 244 76.2 LM 6404 AU
CSOX255 255 50.8 LM 6405 AU/NZ
CSOX280 280 25.4 LM 6410 AU/NZ
CSOX281 281 38.1 LM 6413 AU
CSOX302 302 19.1 LM 6414 AU
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 62 GPC_AUNZSEA_33_1021
E-Glass Reinforcements Code Selector
Description Weight (g/m2)
Width (mm)
Length Quantity UoM Order Code Availability
+ 45° Double Bias Stitched Tapes
XE265 265 1270 100 127 M2 4321 SPECIALIST XE415 415 100 94.8 94.8 LM 4363 NZ
XE415 415 150 94.8 94.8 LM 4366 NZ
XE415 415 200 94.8 94.8 LM 4364 NZ XE415 415 1270 94.8 94.8 LM 4360 AU/NZ XE435M225 435 1270 52 66 M2 4490 AU/NZ XE450 450 1270 85.6 108.7 M2 4370 AU XE602M225 602 100 47.2 47.2 LM 4543 NZ XE602M225 602 150 47.2 47.2 LM 4546 NZ XE602M225 602 1270 47.2 59.9 M2 4540 NZ XE625 625 100 50.4 50.4 LM 4403 NZ XE625 625 150 50.4 50.4 LM 4406 NZ
XE625 625 200 50.4 50.4 LM 4409 NZ
XE625 625 1270 50.4 64.0 M2 4400 AU/NZ XE820 820 100 38.2 38.2 LM 4433 NZ XE820 820 150 38.2 38.2 LM 4436 NZ XE820 820 200 38.2 38.2 LM 4438 NZ
XE820 820 1270 38.2 48.48 M2 4430 AU/NZ
Quad Axial Stitched Fabric
QE1178 1178 1270 33.4 42.4 M2 4674 AU/NZ
QE610 610 1270 51.9 65.88 M2 4655 AU/NZ
QE851 851 1270 46.3 58.8 M2 4661 AU/NZ
Woven Roving
WRE320 320 1300 100.5 130.6 M2 R111-034-1 AU
WRE610 601 1270 65.6 50 Kg 4686 NZ
WRE801 801 1270 49.2 50 Kg 4687 NZ
0/90o Woven Yarn
RE86P 86 1050 105 110.25 M2 R111-008 AU/NZ
RE125P 125 760 100 76 M2 4018 NZ
RE165T 165 1270 105 133.35 M2 R111-203 AU/NZ
RE200 200 1020 100 102 M2 4040 AU/NZ
RE25P 25 1270 50 63.5 M2 R111-002-2 AU
RE290 290 1020 100 102 M2 4070 NZ
RE295H4 292 1240 105 130 M2 R111-113 AU
RE301H8 300 1270 100 127 M2 R111-117 AU
ESOX586-50.8 586 50.8 4123 AU ESOX417-19.1 417 19.1 4124 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 63 GPC_AUNZSEA_33_1021
E-Glass Products Continued
Description Weight (g/m2)
Width (mm)
Length Quantity (M2) UoM Order Code Availability
Uni-directional reinforcement Fabrics
UE450 450 1270 75.6 96.03 M2 4160 NZ
UE850 850 1270 44 55.8 M2 4181 NZ UE851 850 100 60 6 LM 4173 AU/NZ
UE851 850 150 50.2 7.53 LM 4174 AU/NZ
0/90 Biaxial Stitched Fabric
BE420 420 1270 75.3 95.68 M2 4211 AUBE453 453 1270 80 101.6 M2
2 4212 AU/NZ
BE615 615 1270 51.2 65.04 M2
4215 AU/NZ BE825 825 1270 47.6 60.5 M2
4235 AU/NZ
With CSM Backing
BE630M225 630 1270 45.4 57.65 M2 4263 NZBE855M225 855 1270 37.4 47.5 M2 4263 NZ
Triaxial Stitched Fabric
YE1100 1100 1270 38.42 48.8 M2 4635 NZYE810U 810 1270 38.9 49.4 M2 4628 NZ ZE920U 920 1270 34.3 43.56 M2 4615 NZ
Chopped Strand Mat
CSM300-E 300 1040 30 Kg 4737 NZCSM300-P 300 1040 30 Kg 4738 NZ CSM300-P 300 1270 35 Kg 4736 NZ CSM450-E 450 1040 30 Kg 4747 NZ CSM450-E 450 1270 35 Kg 4751 NZ CSM450-P 450 1040 30 Kg 4752 NZ CSM450-P 450 1270 35 Kg 4750 NZ CSM600-P 600 1270 35 Kg 4765 NZ
Aramid / Innegra Fabrics ASOX224 224 38.1 38 LM 6040 AUInnegra 68 68 760 50 38 M2 6179 NZ RA175P 175 1270 50 63.5 M2 R112-003-2 NZ RA175H4 175 1000 100 100 M2 R112-004 AU RA321H5 320 1270 50 63.5 M2 6141 NZ RIC152P 152 1000 90 90 M2 6184 SPECIALIST RIC152T 152 1000 100 100 M2 6185 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 64 GPC_AUNZSEA_33_1021
Ancillary Products
In order to assist in the use of the wide range of materials manufactured and supplied by Gurit, a range of Ancillary Products are also available. These have been refined over many years to enable users to handle products safely and to obtain the very best results from Gurit materials. The Ancillary Products are grouped together into four main categories:
Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives. The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers.
Hollow spheres Increase the volume and reduce the density of any resin system and are used to make adhesive mixes and filling & fairing mixes.
¬ Microballoons: Brown microsphere filler powder used to make glues or paste fillers.
¬ Glass Bubbles: White microsphere filler powder used to make glues or paste fillers.
Short Fibres For adding strength to a resin and hardener mix used as a structural adhesive, short reinforcing fibres are often added which act in a similar strengthening way to the long reinforcing fibres used in composite construction.
¬ Microfibres: Cellulose fibres used to make adhesive mixes.
Flow Modifiers The most common material for modifying the flow properties of a resin mix is colloidal silica. This is a very fine powder which is added in conjunction with other fillers to ‘thicken’ mixes and reduce their flow on vertical surfaces (increase thixotropy).
¬ Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders.
Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of some of the Gurit products from each other, it is important that the correct solvents are selected for the intended application.
Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual appearance. Please contact Gurit Technical Support for further guidance on the correct usage / addition of pigments which can vary by product.
Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 65 GPC_AUNZSEA_33_1021
Code Selector
Filler Powders
Description Approximate Volume Size Units Order Code Availability
Hollow spheres
MICROBALLOONS 500ml 0.5 litres 0.1 kg A225-002 AU MICROBALLOONS 0.3KG 3 litres 0.3 kg A225-003 AU MICROBALLOONS 5KG 50 litres 5 kg A225-005 AU MICROBALLOONS 12KG 120 litres 12 kg A225-007 AU GLASS BUBBLES 500ml 0.5 litres (min order 5) 0.12 kg A230-005 AU GLASS BUBBLES 0.3KG 2 - 3 litres 0.3 kg A230-001 AU GLASS BUBBLES 5KG 30 - 50 litres 5 kg A230-003 SPECIALIST Short Fibres
MICROFIBRES 500ml 0.5 litres 0.1 kg A215-004 AU MICROFIBRES 0.5KG 5 litres 0.5 kg A215-003 AU MICROFIBRES 5KG 50 litres 5 kg A215-005 AU MICROFIBRES 10KG 100 litres 10 kg A215-008 AU Flow Modifiers
AMPRO™ COLLOIDAL SILICA 500ML 0.5 litres 0.04 kg A220-007 AU
AMPRO™ COLLOIDAL SILICA 250G 5 litres 0.25 kg A220-008 AU
AMPRO™ COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-009 AU AMPRO™ COLLOIDAL SILICA 10KG 200 litres 10 kg A220-010 SPECIALIST COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A220-003 SPECIALIST COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-005 SPECIALIST COLLOIDAL SILICA 10KG 200 litres 10 kg A220-006 SPECIALIST Fillers
GRAPHITE POWDER (501) 0.75KG - 0.75 kg A235-001 SPECIALIST
Pigments
Description Colour Size Units Order Code Availability
SP PIGMENT WHITE 0.5KG White 0.5 kg A445-002 SPECIALIST
SP PIGMENT BLACK 0.5KG Black 0.5 kg A445-004 SPECIALIST
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 66 GPC_AUNZSEA_33_1021
Code Selector Continued Spabond™ Dispensing Equipment
Mix-heads and guns not available for individual 310ml single component cartridges.
Volume Description Size Units Order Code Availability
Dispense Guns
900ml Manual / PC Cox Gun, PPM 1 EACH K215-044 SPECIALIST
900ml Pneumatic / PC Cox Gun, PPA 1 EACH K215-039 SPECIALIST
600ml Pneumatic / PC Cox Gun, PPA 300A 1 EACH K215-050 SPECIALIST
400ml J2C400HV GUN, MAN. 400ML 1:1/2:1 1 EACH K215-070 SPECIALIST
400ml SINTEX Dual Cartridge gun 400 ml 1 EACH K215-021-3 AU/NZ 400ml Pneumatic / Metix Gun DM400-85-01 1 EACH K215-022 SPECIALIST
Cartridge Mix Heads
900ml MIX HEAD D16/EL20 BOX 0F 20 1 EACH A640-021 SPECIALIST
600ml Bag of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019 AU/NZ 400ml* Bag of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019* AU/NZ *Suitable for 1:1 and 2:1 cartridge formats
Application, Processing and Sundry items
Description Comments Size Units Order Code Availability
Miscellaneous Dispense Equipment
10CC SYRINGE* 1cc graduations 1 EACH A660-001 SPECIALIST
50CC SYRINGE* 10cc graduations 1 EACH A660-002 SPECIALIST
25 LITRE DRUM TAP Small plastic 1 EACH K342-005 SPECIALIST
200 LITRE DRUM TAP Large plastic 1 EACH K342-010 SPECIALIST
AMPRO™ PUMP SET FOR 1.3KG PACKS 1 EACH K216-320 AU AMPRO™ PUMP SET FOR 4KG PACKS 1 EACH K216-321 AU AMPRO™ PUMP SET FOR 13KG PACKS 1 EACH K216-322 AU AMPRO™ PUMP SET FOR 26KG PACKS 1 EACH K216-323 AU Other Pump Sets Please contact Gurit Customer Support for pump set availability
Application and Processing Items
REUSABLE MIXING POTS 0.5L (0.8L MAX) Minimum order of 100 1 EACH A640-013 SPECIALIST
MIXING STICKS Box of 100 sticks 1 EACH A640-004 SPECIALIST
* Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 67 GPC_AUNZSEA_33_1021
Vacuum Consumables
The range of vacuum consumables has been designed for use in a wide range of vacuum bag processes. Such processes include autoclave/ prepreg curing, wet lay-up, low temperature oven/ prepreg processes and infusion processes. Gurit has selected a specific range of products which are particularly suitable for working with Gurit's epoxy prepreg and laminating systems where they are regularly used for the curing of large composite structures at temperatures up to 150°C.
Sealant Tapes Sealant tape is used to seal the tool to the vacuum bag in order to provide an airtight seal. The tapes are tacky to ensure a positive seal is achieved against a variety of tool surfaces.
Peel Plies Peel plies are fine weave fabrics which are applied to the laminate stack to provide a clean, contaminant-free textured surface, suitable for secondary bonding, filling or painting. Our range is green in colour.
Release Films Release films are used to separate and release the laminate from the vacuum stack following the cure of the component. These films are perforated to allow a certain bleed of resin from the laminate into a breather material such as Econoweave 44W.
Breather Fabrics / Meshes Breather fabrics are used to absorb excess resin (bleed) from a laminate which is being cured under vacuum. The fabric also allows the air, or any volatiles, to be evacuated prior to, and during the cure cycle.
Vacuum Bagging Films Vacuum bagging films are used to effectively seal the whole of the area of the composite laminate to be cured.
Self Adhesive Mould Release Materials Self-adhesive mould release materials are used to cover moulds as an effective alternative to the use of release wax or liquids.
Flash / Release / Shrink Tapes Flash tapes are used to locate vacuum consumable materials or to mask off areas to be painted, sanded or to prevent damage. Some of these tapes have release qualities so they can be used as tool repair tapes if necessary. Shrinktapes are used to consolidate specific components.
For further information on product availability contact your local Gurit office.
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 68 GPC_AUNZSEA_33_1021
Peel Plies
Description Order Code Availability
PP85-50 Peelply Tracer Red Strip 85 x 50mm 8063A AU PP85-100 Peelply Red Stripe 85 gsm x 100mm 8055A AU PP85-150 Peelply Tracer Red Stripe 85 x 150mm 8056A NZ PP85-200 Peelply Tracer Red Stripe 85 x 200mm 8057A AU/NZ PP85-250 Peelply Tracer Red Stripe 85 x 250mm 8058A NZ PP85-400 Peelply Red Stripe 85 gsm x 400mm 8059A AU PP85-600 Peelply Red Stripe 85 gsm x 600mm 8060A AU PP85-750 Peelply Tracer Red Stripe 85 x 750mm 8051A NZ PP85-1000 Peelply Red Stripe 85 gsm x 1000mm V620-004-AP AU PP85-1270 Peelply Tracer Red Stripe 85 x 1270mm 8052A AU/NZ PP92 (P)-1500 Peelply (Polyester) Red Stripe 92gsm-1500mm 8061 AU/NZ PP60-1500 Peelply Nylon 6 White 60gsm x 1500mm 8045A AU PP85-1520 Peelply Red Stripe 85 gsm x 1520mm 8054A AU
Release Film
Description Order Code Availability
RFHT25B(P6)1525 Perforated Release Film Blue 25mu P6 x 1525mm 8425 NZ
RFMT30B(P3)1500 Perforated Release Film Blue 30mu 1500mm (Perf 0.4mm dia, 6mm spacing) 8454 NZ
RFMT30B(P3)-1300 LRF120B P3 Perforated Release Film Blue 30mu 1300mm 8455 AU
RFMT30B(P3)1520 LRF120B P3 Perforated Release Film Blue 30mu 1520mm 8457 AU
RFMT30B(P3)1520 LBF150B-2 P16 30um 1520mm 8456A AU
RFMT30B(P31)1520 Perforated Release Film Blue 30mu 1520mm P31 Perforation 8456B AU
RF50-2000 Release Film Perforated 50mu x 2000mm 8410 NZ RFNP50-2000 Release Film Not Perforated 50mu x 2000mm 8411 NZ
Vacuum Bagging Films
Description Order Code Availability
VFHT75G-2030 Vacuum Bag Film Green 75Micron x 2030mm 8278 NZ VFHT75G-4060 Vacuum Bag Film Green 75Micron x 4060mm 8281 NZ VFSL37G-1525 Stretchlon 200 .0015 x 60" x 1525mm 8205 NZ VFMT50Y-1000 Vacuum Bag Film Yellow 50 Micron x 1000mm 8250 AU VFMT50Y-1500 Vacuum Bag Film Yellow 50 Micron x 1500mm 8251 AU VFMT65Y-1830 Vacuum Bag Film Yellow 65 Micron x 1830mm 8253 AU VFMT50Y-4060 Vacuum Bag Film Yellow 50 Micron x 4060mm 8254 AU VFTMT50Y-1500 Vacuum Bag tube Yellow 50 Micron x 1500mm 8249 AU
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 69 GPC_AUNZSEA_33_1021
Mould Release Materials
Description Order Code Availability
PTFE-RF1000 Adhesive backed PTFE 1000mm V750-001 AU/NZ
Breather Fabrics/Meshes
Description Order Code Availability
BF150-1500 Breather 150g/m² x 1500 wide (150m²/roll) 8313 NZ BM5-910 Mesh Breather / Bleeder x 910mm (45.5m² roll) 8340 NZ Knitflow70-1830 Knitflow 70 x 1.83m (50m roll) 8342 AU BFW150-1520 Breather 150g/m² x 1520mm wide 8312 AU TMS-G-1042 Hi Performance Resin Transfer Medium - 1042mm 8956 AU/NZ
Sealant Tapes
Description Order Code Availability
ST3Y-12 Sealant Tape 3.2mm x 12.7mm Yellow, 7.62LM/roll 8535 NZ ST3B-12 LG160 Sealant Tape 15m x 12mm x 3mm (20x15M Roll / Ctn) 8539 NZ ST3.5G-12.5 LG2000 Sealant Tape 8m X 12.5mm x 3.5mm (24x8M Roll / Ctn) 8538 AU/NZ ST3B-12(LG150) LG150 Sealant Tape 15m x 12mm x 3mm (20x15M Roll / Ctn) black 8537 AU
Tensorgrip Range - Spray Adhesives
Description Order Code Availability
TC43-G Green Superweb infusion Spray Adhesive 500ml Aerosol (12/ctn) 8521 NZ TC43 Superweb infusion Spray Adhesive - 500ml Aerosol (12/ctn) 8522 NZ TC49-G Green Spray Adhesive - 500ml Aerosol (12/ctn) 8523 AU/NZ TC49 Spray Adhesive - 500ml Aerosol (12/ctn) 8524 AU/NZ TC42-G Green Spray Adhesive - 500ml Aerosol (12/ctn) 8525 AU/NZ TC42 Spray Adhesive - 500ml Aerosol (12/ctn) 8526 AU/NZ
AU/NZ = stocked product in Australia and New Zealand AU = stocked in
Australia only NZ = stocked in NewZealand only SPECIALIST = please contact your local office
for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.
GuritAUNZSEAProductCatalogue 70 GPC_AUNZSEA_33_1021
Other
Description Order Code Availability
VV-401C Vac Valve 401C In bag connections 8922 NZ Vac Gauge 30 Vac Gauge 30 8926 NZQD500TF Quick Disconnects with Viton O-Rings 1/4" (threaded) 8927 NZ GrapPowder.75 Graphite powder 0.75kg A235-001 SPECIALIST RS-150 Rubber squeegee 150mm 8920 NZ
FB1-25 Flashbreaker 1/25mm V720-001 AU/NZ
HST575-32 Heat Shrink Tape 32mm 8543 AU/NZ
HST575-64 Heat Shrink Tape 64mm 8545 AU/NZ
LFT75-178 Lay Flat Tubing .003 gauge x 178mm (228lm/roll) 8224 NZ
LFT75-304 Lay Flat Tubing .003 gauge x 304.8mm (305 lm/roll) 8227 NZ
LFT75-457 Lay Flat Tubing .003 gauge x 457mm (305lm/roll) 8232 NZ
LFT75-686 Lay Flat Tubing .003 gauge x 686mm (228lm/roll) 8233 NZ
PTFE 2-50 High Temp PTFE Pressure Sensitive Tape .002 x 2" 8505 NZ
PTFE 2-25 High Temp PTFE Pressure Sensitive Tape .002 x 1" 8504 NZ FPF-100 FPF-100 (Enkachannel) 8196 AU/NZ
PEVT-12ID Polyethylene infusion Tubing 12mm ID 16mm OD (50LM / Roll) 8944A AU Vac Spiral 12/15 Vacuum Infusion Spiral 12/15 8953A AU 12 Valve 12mm Valve 8952A AU 12 Tee Piece 12mm Tee Piece 8947A AU 12 Infusion Port 12mm Infusion Port 8970A AU
Gurit SCALES Gurit Formulated Product Scales A675-004 SPECIALIST
Gurit SCALES
The Gurit SCALES have been developed for use with the full range of Gurit Formulated Products.
• AMPRO™ Multi-purpose & SP 106 / SP 320 Legacy Systems• Ampreg™ Laminating• Spabond™ Adhesive• PRIME™ Infusion
Full details of specific hardener speeds and components are included in the Gurit SCALES leaflet.
GuritAUNZSEAProductCatalogue 71 GPC_AUNZSEA_33_1021
Gurit Structural Engineering
Gurit Composite Engineering is a specialist consulting company, providing independent services within the field of Lightweighting and Structural Engineering for Fibre Reinforced Polymers (FRP) and Carbon Fibre Reinforced Polymers (CFRP).
We are the engineering backbone for Gurit offering independent composite engineering services to designers and manufacturers since the 1980s.
We are proud to share our know-how and demonstrate a solid track record of key engineering services for racing boats, superyachts, production boats, workboats, cars, buses, civil and architectural structures, and industrial components.
A core team of 40 qualified and dedicated composite engineers in the New Zealand, United Kingdom, France are keen to support customers, business partners and projects around the globe with the full range of capabilities tailored to the specific project and needs. We cover all time zones and geographies.
Gurit Composite Engineering, GCE, is a part of the Gurit group, active in various fields of advanced composites, i.e. materials development, materials manufacture, testing, processing advice, tools and prototyping, as well as parts manufacture. Hence, together with our group partners we can offer a wider scope for FRP and CFRP solutions if so needed.
Engineering Tasks include: § Conceptual design§ Laminate design & optimisation§ Analysis using in-house tools§ FEA static, nonlinear and dynamic analysis including crash simulation§ CAD§ On-site engineering support§ On site data acquisition and monitoring§ Certification authority liaison§ Mechanical testing of materials in our accredited testing lab§ Weight and cost estimates and optimisation§ Design review, peer review, inspection and repair specifications
Software utilised in-house includes:§ Proprietary specialist software§ AutoCAD§ SolidWorks§ Rhino§ Hyperworks
GuritAUNZSEAProductCatalogue 72 GPC_AUNZSEA_33_1021
Gurit Mechanical Testing
Key to the design of composite materials is understanding how the material behaves and performs. Gurit engineering runs and internationally accredited mechanical testing laboratory specialised in FRP composites for our customers. Mechanical testing can be done for a number of purposes:
§ Design certification and third party approval of as-built properties§ Post build surveyors, forensics or to establish repair specifications§ Establish baseline materials properties for design§ Research and development to test new idea, validate concepts and build methods
Key to the success of this laboratory is that it is run by experienced composite design engineers who are available to help you to design an appropriate materials test program for your needs. This includes design of test specimens for standard programs, design and implementation of customised and specific tests, interpretation and reporting on the results to enable them to be implemented into your project or process.
In addition to the mechanical testing at the Auckland site the test lab is also linked with Gurit's extensive test lab in the UK for a variety of testing for Tg, fibre weight fraction (by burn-off and microscopy) environmental exposures, as well as links to universities and commercial laboratories for specialised testing.
Mechanical testing laboratory set up with:
§ Instron 3369 load frame with 50kN load cell using latest Bluehill Universal Software. A-grade annual calibration report available upon request
§ LVDT (Linear Variable Displacement Transducer) - Large scale displacementmeasurement
§ Extensometer - Initial modulus/strain measurement§ Strain gauge controller - Calibrated Vishay 2 Channel Controller. Direct strain
measurement including strain to failure.§ Full range of test fixtures for accredited testing
GuritAUNZSEAProductCatalogue 73 GPC_AUNZSEA_33_1021
Gurit provides accredited testing to the following standards:
a) Tensile tests in accordance with the following standards up to 50 kN forceASTM C 297/C 297M Flatwise tensile strength of sandwich constructionsASTM D 1623 Tensile and tensile adhesion properties of rigid cellular plasticsASTM D 3039/D 3039M Tensile properties of polymer matrix composite materialsISO 527-5 Plastics Determination of tensile properties – Part 5: Test conditions forunidirectional fibre-reinforced plastic composites
(b) Compression tests in accordance with the following standards up to 50 kN forceASTM C 365/C 365M Flatwise compressive properties of sandwich coresASTM D 1621 Compressive properties of rigid cellular plasticsASTM D 6641/D 6641M Compressive properties of polymer matrix composite materialsusing a combined loading compression (CLC) test fixtureISO 844 Rigid cellular plastics – Determination of compression properties
(c) Flexure and stiffness in accordance with the following standardsAS 3572.10 Determination of the initial ring stiffness of glass filament reinforced plastic pipes(constant deflection test only)ASTM D 790 Flexural properties of unreinforced and reinforced plastics and electricalinsulating materialsASTM D 2344/D 2344M Short-beam strength of polymer matrix composite materials andtheir laminatesASTM D 2412 Determination of external loading characteristics of plastic pipe by parallel-plate loadingASTM D 6272 Flexural properties of unreinforced and reinforced plastics and electricalinsulating materials by four-point bendingASTM D 7249/D 7249M Facing properties of sandwich constructions by long beam flexureASTM D 7250/D 7250M Determining sandwich beam flexural and shear stiffness
(d) Shear strength in accordance with the following standardsASTM C 273/C 273M Shear properties of sandwich core materials by parallel plate loadingASTM C 393/C 393M Core shear properties of sandwich constructions by beam flexureASTM D 3165 Strength properties of adhesives in shear by tension loading of single-lap-jointlaminated assemblesASTM D 3528 Strength properties of double lap shear adhesive joints by tension
(e) Density and specific gravity in accordance with the following standardsASTM C 271/C 271M Density of sandwich core materials
(f) Constituent tests in accordance with the following standardsASTM D 3171 Constituent content of composite materials (weight fraction test only)
(h) Other testsASTM D 5961/D 5961M Bearing response of polymer matrix composite laminates (ultimate bearing strength test only)
GuritAUNZSEAProductCatalogue 74 GPC_AUNZSEA_33_1021
Other custom and speciality testing:
ASTM D 695 Compressive Properties of Rigid Plastics ASTM D 7078/D 7078M In-plane shear by V-Notched Rail Shear ISO 8521 Hoop Tensile Strength of Pipe ISO 8513 Longitudinal Tensile Strength of Pipe AS 4257.6 (Plastic roof and wall cladding materials – determination of impact resistance) Screw retention in composite panels Indentation resistance Curved beam flexure (through thickness tension) Peel
Contact us:
Stuart Dow Tony Stanton
Design and Test Engineer Engineering Manager - APAC
T +64 9 414 1811 T + 64 9 970 2942
E [email protected] E [email protected]
Our accreditations:
GuritAUNZSEAProductCatalogue 75 GPC_AUNZSEA_33_1021
Contact
Gurit (Asia Pacific) Ltd is available during standard business hours Monday to Friday 0830 – 1700 (NZSDST/ AEST). Outside of these hours you will be greeted by an answering service with the option to leave a message.
Please use the contact numbers provided in the table below for all enquires.
Email and Website All personnel can be contacted directly by email. If you are not sure whom to contact please use the generic customer support e-mail address instead.
Information on products can be found at our website www.gurit.com. The site contains the most up to date information on all products, available to download in PDF format.
Contacting Gurit Main Switchboard Telephone Fax Email:
Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262 [email protected]
Gurit (Aus) +61 (0)7 3807 3118 +61 (0)2 9979 6378 [email protected]
Gurit (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262 [email protected]
Gurit (Aus) +61 (0)7 3807 3118 [email protected]
Sales (NZ) +64 (0)9 415 6262 +64 (0)9 415 7262
Sales (Aus) +61 (0)7 3807 3118
Sales (SE Asia) +64 (0)9 415 6262 +64 (0)9 415 7262
Engineering +64 (0)9 970 2942 [email protected]
Marketing +64 (0)9 970 2943 [email protected]