E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 1 GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR TENDER NOTICE NO: SK/ RC / 11 of 2008- 09. NOTICE INVITING ON LINE TENDER FOR FIXING YEARLY RATE CONTRACT FOR VARIOUS SIZES OF CUBICAL CONTROL PANEL BOARDS AND AUTOMATED POWER CONTROL SYSTEMS WITH SUITABLE CAPACITORS FOR THE YEAR 2009-2010. ( PART-II ) The Executive Engineer, Public Health Mechanical Store Division, GWSSB, Block No. 193/3 & 4, G-1- Type, Sector-30, Gandhinagar-382 030 (Gujarat State) invites ONLINE tender for fixing yearly rate contract for purchase of Various Sizes of Cubical Control Panel Boards and Automated Power Control Systems with suitable Capacitors from Original Manufacturers only. Interested Bidders who wish to participate in the above tender may view the detai led tender notice and can download tender documents free of cost by visiting our website at www,statetender.com / www.gwssb.org and www.nprocure.com. (A) Details of Tender Items: Sr. No. Particulars Estimated Cost (Rs. in Lacs) E.M.D. in Rs. Tender fees 1. Manufacture, Supply and Delivery of Various sizes of Cubical Control Panel Boards and Automated Power Control Systems with suitable Capacitors as per Detailed Technical Specification 129.15 1,50,000/- 3,600/- (B) Schedule for E - tendering is fixed as under. i) Bid Document Downloading of tender from : Date : 06.03.2009. ii) Bid Document Downloading of tender End Date : Upto 15.05.2009 @ 18.00 Hrs. Iii) Date of Pre-Bid Conference : Date : 04.05.2009 @ 12.00 Hrs. iv) Last Date of Online Bid Submission : upto 15.05.2009 @ 18.00 Hrs. v) Submission of Tender Fee, EMD and other documents in person. : (1) Tenderer shall be submitted the all certificates / Documents to this office on or Before Dtd. 16.05.2009 at 12.00 Hrs (2) Demand Draft for E.M.D & Tender fee shall be submitted in electronic format only through ONLINE (by scanning) while uploading the bid. This submission shall mean that E.M.D & tender fee are received for purpose of opening the bid. Accordingly offer of those shall be opened whose E.M.D. & tender Fee is received electronically. However for the purpose of realization of Demand Draft bidder shall send the Demand Draft in original through R.P.A.D. So, as to reach to this office as mentioned in the tender documents within 7 (Seven) days from the last Date of uploading i.e. Before Dtd. 16.05.2009 For not submitting Demand Draft in Original bidder shall be banned to participate in any tender of the Board for period of 3 (Three) Years as a penalties action. vi) Online Opening of Tender (If Possible) : 18.05.2009 at 15.00 Hrs. at Office of the Chief Engineer (Mech.), Material Cell, GWSSB, Sector-10-A, Gandhinagar (Gujarat). Executive Engineer P.H. Mech. Store Division GWSSB, Gandhinagar
45
Embed
GUJARAT WATER SUPLY AND SEWERAGE BOARD - … Panel Board... · GUJARAT WATER SUPLY AND SEWERAGE BOARD ... documents free of cost by visiting our website at www,statetender.com / www
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 1
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
TENDER NOTICE NO: SK/ RC / 11 of 2008-09.
NOTICE INVITING ON LINE TENDER FOR FIXING YEARLY RATE CONTRACT FOR VARIOUS SIZES OF CUBICAL CONTROL PANEL BOARDS AND AUTOMATED POWER CONTROL SYSTEMS WITH
SUITABLE CAPACITORS FOR THE YEAR 2009-2010. ( PART-II ) The Executive Engineer, Public Health Mechanical Store Division, GWSSB, Block No. 193/3 & 4, G-1-Type, Sector-30, Gandhinagar-382 030 (Gujarat State) invites ONLINE tender for fixing yearly rate
contract for purchase of Various Sizes of Cubical Control Panel Boards and Automated Power Control Systems with suitable Capacitors from Original Manufacturers only. Interested Bidders who wish to participate in the above tender may view the detailed tender notice and can download tender documents free of cost by visiting our website at www,statetender.com / www.gwssb.org and www.nprocure.com. (A) Details of Tender Items:
Sr. No.
Particulars Estimated Cost (Rs. in Lacs)
E.M.D. in Rs.
Tender fees
1.
Manufacture, Supply and Delivery of Various sizes of Cubical Control Panel Boards and Automated Power Control Systems with suitable Capacitors as per Detailed Technical Specification
129.15 1,50,000/- 3,600/-
(B) Schedule for E - tendering is fixed as under.
i) Bid Document Downloading of tender from
: Date : 06.03.2009.
ii) Bid Document Downloading of tender End Date
: Upto 15.05.2009 @ 18.00 Hrs.
Iii) Date of Pre-Bid Conference : Date : 04.05.2009 @ 12.00 Hrs.
iv) Last Date of Online Bid Submission : upto 15.05.2009 @ 18.00 Hrs.
v) Submission of Tender Fee, EMD and other documents in person.
: (1) Tenderer shall be submitted the all certificates / Documents to this office on or Before Dtd. 16.05.2009 at 12.00 Hrs
(2) Demand Draft for E.M.D & Tender fee shall be submitted in electronic format only through ONLINE (by scanning) while uploading the bid. This submission shall mean that E.M.D & tender fee are received for purpose of opening the bid. Accordingly offer of those shall be opened whose E.M.D. & tender Fee is received electronically. However for the purpose of realization of Demand Draft bidder shall send the Demand Draft in original through R.P.A.D. So, as to reach to this office as mentioned in the tender documents within 7 (Seven) days from the last Date of uploading i.e. Before Dtd. 16.05.2009 For not submitting Demand Draft in Original bidder shall be banned to participate in any tender of the Board for period of 3 (Three) Years as a penalties action.
vi) Online Opening of Tender (If Possible)
: 18.05.2009 at 15.00 Hrs. at Office of the Chief Engineer (Mech.), Material Cell, GWSSB, Sector-10-A, Gandhinagar (Gujarat).
Executive Engineer P.H. Mech. Store Division
GWSSB, Gandhinagar
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 2
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
TENDER NOTICE NO: SK/ RC / 11 of 2008-09.
NOTICE INVITING ON LINE TENDER FOR FIXING YEARLY RATE CONTRACT FOR VARIOUS SIZES OF CUBICAL CONTROL PANEL BOARDS AND AUTOMATED POWER CONTROL
SYSTEMS WITH SUITABLE CAPACITORS FOR THE YEAR 2009-2010.
Department Name : Gujarat Water Supply and Sewerage Board
Circle : Public Health Mechanical Circle, Ahmedabad
Division : Executive Engineer, Public Health Mechanical Store Division, GWSSB, Block No. 193/3, Sector-30, Gandhinagar-382 030 (Gujarat State) Tel. No. (079) 23261605
IFB No :
Name of Project : Fixing Yearly Rate Contract for the Year: 2009-10 Name of Work : Manufacture & Supply of Various Sizes of Cubical
Control Panel Boards and Automated Power Control Systems with suitable Capacitors. As per detailed technical specifications.
Estimated Contract Value (INR) : Rs. 1,29,14,500/-
Period of Completion (in Months) : Twelve Months
Bidding Type : Opened
Bid Call (Nos) : 1 Tender Currency Type : Single
Tender Currency Settings : Indian Rupee(INR)
Joint Venture : Not Applicable
Rebate : Applicable / Not Applicable Amount Details
Bid Documents Fee : Rs. 3,600/-
Bid Documents Fee Payable to : Executive Engineer, Public Health Mechanical Store Division, GWSSB, Gandhinagar
Bid Security / EMD (INR) : Rs. 1,50,000/-
Bid Security / EMD in favour of : Executive Engineer, Public Health Mechanical
Store Division, GWSSB, Gandhinagar Tender Dates
Bid Document Downloading Start Date : 06.03.2009
Bid Documents Downloading End Date : Upto 15.05.2009 @ 18.00 Hrs.
Last Date of Online Bid Submission : Upto 15.05.2009 @ 18.00 Hrs. Pre-Bid Meeting : 04.05.2009 @ 12.00 Hrs.
Last Date & Time for Receipt of Bid Documents.
: B e f o r e d a t e d . 16.05.2009 at 12.00 Hrs. a t office of the Executive Engineer, P.H. Mechanical Store Division, Block No: 193/3, G-1 Type, Sector-30, Gandhinagar - 382 030.
Bid Validity Period : 120 Days
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 3
Remarks : (1) Tenderer shall be submitted the all certificates / Documents to this office on or Before Dtd. 16.05.2009 at 12.00 Hrs
(2) Demand Draft for E.M.D & Tender fee shall be submitted in
electronic format only through ONLINE (by scanning) while uploading
the bid. This submission shall mean that E.M.D & tender fee are
received for purpose of opening the bid. Accordingly offer of those
shall be opened whose E.M.D. & tender Fee is received electronically.
However for the purpose of realization of Demand Draft bidder shall
send the Demand Draft in original through R.P.A.D. So, as to reach to
this office as mentioned in the tender documents within 7 (Seven)
days from the last Date of uploading i.e. Before Dtd. 16.05.2009 For
not submitting Demand Draft in Original bidder shall be banned to
participate in any tender of the Board for period of 3 (Three) Years as
a penalties action.
Bid Opening Date : 18.05.2009 @ 15.00 Hrs.
Other Details:-
Officer Inviting Bids : Executive Engineer, Public Health Mechanical Store
Other Terms & conditions as per detailed tender documents.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 4
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
INSTRUCTIONS FOR TENDERER
Tenderers should read general terms and conditions of tender, technical specifications and
following instructions thoroughly and carefully before submitting the Bid.
1. Only Original Manufacturers for Control Panel Board themselves are eligible to compete in
this bid as per clause No.1 of General Terms and Conditions.
2. Rates shall be quoted as per clause No. 2 of General Terms and conditions.
3. The tender shall be rejected outright if;
a) Tender is in the name of person OR firm who is not a manufacturer.
b) If tenderer has given indefinite OR vague delivery period and not accept clause of
dispute as per Clause No. 32.
c) If tenderer has quoted rates with additional condition and counter conditions.
d) In case of any deviation in the specifications, terms and conditions of the tender.
e) If the tender is not digitally signed by the manufacturer.
f) If experience of companies for manufacturing of Control Panel Board is less
than five years.
g) If authorization certificate of Manufacturing of Contactors, Electronics Motor
Protection relay and MCCB are not attached.
4. Tender is likely to be treated as Non-Responsive at the discretion of the Board in
following circumstances.
a) The minimum Committed Sparing Capacity for GWSSB should be worth Rs. 10
Lacs per month as per note shown in ANNEXURE - II of tender documents f or
assorted Capacities of Cubical Control Panel Board for which the tenderer are
entitled to quote their rates. Other wise the offer will be considered as non-
responsive.
b) If the following documents are not enclosed.
i) Attested copy of Sales tax registration Certificate.
ii) Attested copy of Industries Department / NSIC / SSI Unit / Enterprise /
D.G.S.& D. regarding installed capacity of the plant.
iii) If the performance of last three years as per Appendix-I is not furnished
with the Tender. Gujarat based SSI unit / Enterprise should submit the
performance for the period as per their experience.
iv) The manufacturer has to furnish the undertaking on the Non judicial
stamp paper of Rs. 20/- duly Notarized regarding his firm is not black
listed / Not BIFR Unit at the time of tendering. This undertaking should be
enclosed in the document Cover.
v) The name and specimen signature of authorised signatory of the tenderer
shall be given in the tender so that during the validity of contract the
correspondence from that the signatory authority will be entertained.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 5
vi) If the checklist is not submitted in separate sealed cover over in
Document Cover.
5. Questionnaires to be filled up by the Tenderer are to be kept in Technical Bid and it shall
be the part of the tender document. The questionnaires are to be submitted by the
tenderer digitally signed ONLINE.
6. A certificate issued not later than one year before the date of opening of the tender from
the Industries Department stating that unit is now at present SSI unit / Enterprise and that
it hold SSI registration on the date of issue of certificate should be furnished alongwith
Document Cover, failing which no SSI benefits shall be given. The proof shall have to be
produced to the consignee at the time of agreement and during Rate contract period
whenever demanded.
7. Tenderer are requested to furnish all their certificates/ documents in the prescribed time
limit given by the Board.
8. If the technical bid is decided as non-responsive, the price bid shall not be opened.
9. If any vendor is found canvassing for his vendor from the date of opening of tender till
finalisation of the tender than his tender will not be considered for award and he will be
automatically debarred for two years from vendors of the Board.
10. The Rules and Regulations of Government / GWSSB in force and will be
binding to all tenderers.
11. Demand Draft for E.M.D & Tender fee shall be submitted in electronic format only
through ONLINE (by scanning) while uploading the bid. This submission shall mean
that E.M.D & tender fee are received for purpose of opening the bid. Accordingly
offer of those shall be opened whose E.M.D. & tender Fee is received electronically.
However for the purpose of realization of Demand Draft bidder shall send the
Demand Draft in original through R.P.A.D. So, as to reach to this office as mentioned
in the tender documents within 7 (Seven) days from the last Date of uploading i.e.
Before Dtd. 16.05.2009 For not submitting Demand Draft in Original bidder shall be
banned to participate in any tender of the Board for period of 3 (Three) Years as a
penalties action.
Any Document in supporting of tender bid shall be submitted in electronic format only
through online (By scanning etc.) & Hard Copy of the entire certificate / documents will be
accepted separately.
Signature of Tenderer. Executive Engineer, P.H. Mech. Store Division GWSSB, Gandhinagar. Place : Date :
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 6
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
THE METHOD OF EVALUATION AND AWARD OF RATE CONTRACT
1. Every bidder shall clearly mention his committed supplying capacity for GWSSB item
wise as well as total.
2. The Board reserves the right to enter into parallel rate contract with next evaluated
responsive bidder if he matches the lowest price and order for quantity in excess of
75% of committed supplying capacity the 1st Rate Contract holder will spill over to
him to the extent of 75% of his committed supplying capacity. The quantity allocation
will be at the discretion of the Board Office.
3. If the Board enters into more than one Parallel rate contract then the procedure of
allotment orders will be similar one as with second Rate Contract holder i.e. excess
requirement after allotment to second one will spill over to third one to the extent of
his 75% committed supplying capacity and so on.
4. In case evaluated rate of two OR more bidders happened to be the same, Gujarat
Water Supply and Sewerage Board will consider other factor like quality aspects, to
decide internal grading amongst such bidders, GWSSB’s discretion in this regard
shall be final and no reason or details will be given.
5. As per Government of Gujarat, Finance Department, Circular No: GST - 2003 - UO -
159 - TH, Sachivalaya, Gandhinagar Date : 27.01.2004, Evaluation of the Tender will
be carried out without considering any amount of Sales Tax / VAT under any law.
6. The allotment of quota for orders to the first lowest rate contract holder or other rate
contract holders, as per ranking, will be made on the performance of every three
months at the discretion of the Board.
7. No negotiation at any stage shall be done before finalization of tenders except TPC
of Board.
8. Price Preference and Order Preference shall be given to the Gujarat Based Registered SSI Unit as per Clause No. 24.
9. The placement or not to place supply order on regular as well as parallel rate
contract, will be at the discretion of competent authority of Board Office, which will be
binding to all rate contract holders.
Signature of Tenderer. Executive Engineer, P.H. Mech. Store Division GWSSB, Gandhinagar.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 7
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
QUESTIONNAIRE TO BE FILLED UP BY THE TENDERER
This questionnaire is part of the tender document and it is to be duly filled-in and digitally signed by the tenderer. Tenderer are requested to answer/ complete every item of this questionnaire duly supported with requisite documents/ certificates.
1. Name of the firm:
2. Address of the firm:
3. Telephone No.:
4. Name & Address of the Proprietor / Partner / Directors of the firm along with designation
NOTE : Please furnish partnership deed along with document Cover.
5. SSI unit / Enterprise Registration
Pe rmanen t SS I Registration No.
Date
Valid Up to
6. Sales Tax / VAT:
(a) Indicate sales tax Regd. No.
(b) Whether your firm is covered Sales Tax exemption facility?
Tick Initial
Yes
If yes, please indicate nature of facility and furnish relevant certificate.
(a) If holding ISI licence, are you authorised to stamp/ mark the tendered stores as ISI?
No
If yes, give details of size, class/ Dia etc.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 8
9. RAW MATERIAL
Tick Initial
Accepted
Not Accepted
Tender against assurance for supply of raw material shall not be considered. Tenderer is required to make his own arrangement for procurement of requisite raw material. Please confirm acceptance of this clause.
10. List of documents certificates. Tenderer should submit statement-indicating list of documents/ certificates as specified in the tender.
11. Authorized Representative: Please indicate the name of your
representative authorised to attend tender opening & representing your firm there after in connection with the tender.
Tick Initial 12. Terms of the tenderer shall not form part of this tender. Accepted
Not Accepted
Please confirm acceptance to this clause.
13. Acceptance of the terms & conditions
of this tender.
Tick Initial
Accepted
(a) Tenderer shall accept all the conditions of this tender. Unequivocally without any reservation and as such tenderer shall not alter/ add/ delete any of the conditions of the tender or part thereof.
Not Accepted
Tick Initial Accepted Not
Accepted
(b) If terms & conditions, specification of this tender are not accepted. Price bid submitted by such tenderer shall not be opened and same shall be treated as cancelled.
14 Details of Income tax Permanent Account Number
PAN Number:
· Name of Bank: · Name of Branch:
· MICR Code Number:
· RTGS No. · Type of Account :
15 Details of Bank Account for Record & Payment Purpose.
· Account Number: It is certified that the above information is true to the best of my knowledge & belief. If any information furnished above found incorrect or false in that case, I (Bidder) shall be liable for punishment at decided by GWSSB. Signature of Tenderer. Executive Engineer, P.H. Mech. Store Division GWSSB, Gandhinagar. Place : Date :
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 9
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
GENERAL TERMS AND CONDITIONS FOR SUPPLY OF VARIOUS SIZES OF CUBICAL
CONTROL PANEL BOARDS WITH SUITABLE CAPACITORS UNDER RATE
CONTRACT
1. ELIGIBILITY FOR BIDDING :
Original Manufacturers for Control Panel Board are only eligible to complete in their own
name in this bid and accordingly rate contract agreement will be executed with
manufacturer only. Power of attorney acceptable to GWSSB who may deal with
GWSSB on their behalf. The specimen signature of authorized signatory of the
tenderer shall be given in the tender so that during the validity of contract the
correspondence from that signatory authority will be entertained.
Companies like Schneider, SIENENS, L & T. ABB etc. can apply through their panel
builder. Authorization of companies is essential for the purpose and experience
certificate of minimum not less than five years may be necessary in Government /
Corporation / Limited company. The Bidder has to submit the Authorisation
Certificate at the time of submission of tender.
Tender Fee:
Tender fee Rs. 3,600/- (i.e. Rs. Three Thousand Six Hundred Only) in the
form of Demand Draft only in favour of Executive Engineer, P.H. Mechanical Store
Division, GWSSB, Gandhinagar drawn on any Nationalized Bank and Scheduled
Bank. (List of Bank attached ANNEXURE- I) Payable at Gandhinagar shall be
submitted in electronic format only through ONLINE (by scanning) while uploading
the bid. This submission shall mean that tender fee is received for purpose of
opening the bid. Accordingly offer of those shall be opened whose tender Fee is
received electronically. However for the purpose of realization of Demand Draft
bidder shall send the Demand Draft in original through R.P.A.D. So, as to reach to
this office as mentioned in the tender documents within 7 (Seven) days from the last
Date of uploading i.e. Before Dtd. 16.05.2009 For not submitting Demand Draft in
Original bidder shall be banned to participate in any tender of the Board for period of
3 (Three) Years as a penalties action.
2. QUOTING RATES:
The rates quoted shall be inclusive of Excise Duty, Insurance, Freight, Carting,
Loading, Unloading and Stacking Charges at Consignee's stores either with CST /
VAT for Outside Gujarat State Units or with GST / VAT for Gujarat State Units. The
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 10
rates quoted shall be expressed in words. The Present rate of G.S.T./C.S.T. / VAT
applicable shall be shown separately.
The GWSSB / the consignee will not issue "P" or "C" or any Concessional form. The
rate of applicable Sales Tax / VAT shall have to be quoted accordingly.
3. SUBMISSION OF TENDER:
Tenderer should submit their offer in electronic format digitally signed shall have to
submit on or before the prescribed date & time.
The tenderer shall be submitted all the Certificate / Documents in office of the
In the event of any dispute or difference arising out of this tender/contract, the
jurisdiction of the court shall be Gandhinagar (Gujarat) only. While executing the
agreement the supplier shall be governed at all times by all laws, regulations, etc. in
force in Gujarat State.
33. INDEMNITY :
The supplier shall at all time indemnity the Member Secretary, Gujarat Water Supply
and Sewerage Board, Gandhinagar against all claims which may be made in respect
of the stores for infringement of any right protected by patent registration of design or
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 20
trademark and shall take all risk of accidents or damage which cause a failure of the
supply from whatever, cause arising and entire responsibility for the sufficiency of the
means use by supplier for the fulfillment of the contract. Provided always that in the
event of any claims in respect of alleged breach of letter, Patent, registered patent,
registration design of trade mark being made against the GWSSB, shall notify to the
supplier and he shall be at the liberty at his own expense to conduct negotiation for
settlement of any litigation that may arise there from.
34. DISPUTE :
In the event of any problem, dispute or difference arising out of or under this contract
the decision of Member Secretary, Gujarat Water Supply and Sewerage Board,
Gandhinagar will be the final and binding to the parties participated in tender / rate
contract.
35. PARALLEL RATE CONTRACT:
The Board reserves the right to enter into parallel rate contract with next evaluated
responsive bidder if he matches the lowest price and order for quantity in excess of
75% of committed supplying capacity the 1st Rate Contract holder will spill over to
him to the extent of 75% of his committed supplying capacity. Narmally, the allocation
of the order quantity will be 75% the quoted monthly sparing capacity.
36. TRANSIT INSURANCE:
The purchaser will not pay separately for any transit insurance and the suppliers will
be responsible for the entire stores contracted arrive in good condition at the
destination. However, consignee will notify in writing any damage loss or short supply
to the Insurance Co. and the supplier within 15 days of receipt of Goods.
37. MODE OF MEASUREMENT:
The rates approved are on per Sets basis. The measurement shall be taken on per
Sets basis only. Payment shall be made on the basis the total Sets of materials
supplied.
38. FALL CLAUSE :
All through the currency of this Rate Contract, the price at which the supplier will
supply the stores should not exceed the lowest price charged by you to any customer
during the currency of this rate contract. In the event of price going down below the
rate contract prices he shall promptly furnish such information to us to enable us to
amend the contract value for subsequent supplies. In terms of above clause, the rate
contract holder should furnish the following certificate to this office at the beginning
and every quarter thereafter during the rate contract period and at the end of the rate
contract period that they have satisfied the condition of the clause.
“I/we certify that the stores of the description indicated the stores supplied to the
GWSSB under the contract herein have not been sold by me/us during the period of
supply from_______________ to _______________ to any other person/
Government at a price lower then the price charged to the GWSSB under this
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 21
contract except for the quantity of ___________________ under export promotion to
earn foreign exchange under the contract”.
39. STATUTORY VARIATIONS:
The prices of the materials/stores quoted by the tenderer will be on the basis of
current taxes and levies. If there be any increase/decrease in the statutory taxes/
levies viz. Excise Duty / Sales Tax / VAT etc. imposed by the Central/State
Government on the finished products covered by this Rate Contract, they will be to
the account of consignee and same will be finalised by the Executive Engineer, P.H.
Mechanical Store Division, Gujarat Water Supply and Sewerage Board, Gandhinagar
on receipt of necessary documentary evidence from supplier.
40. EXCESS PAYMENT RECOVERY CLAUSE:
The amount recoverable from the Contractor by the GWSSB on any account shall be
liable to the recovered from the amount payable to the Contractors/Suppliers under
this clause.
41. MINIMUM COMMITTED SPARING CAPACITY:
The Minimum Committed Sparing Capacity shall not be less than Rs. 10.00 Lacs per
month. i.e. The bidder shall be binding to supply Penal Boards costing upto Rs.
10.00 Lacs per month if order placed. Any offer less than above monitory limit shall
be treated as Non-Responsive. The Bidder shall have to mention their committed
sparing capacity to GWSSB in ANNEXURE-II.
42. FALLS CALL :
If materials are not ready for inspection even though inspection calls as has been
given in that case it shall be considered as "FALLS CALL".
For each "FALLS CALL" 1% of the total order value shall be recovered from the
payments to be made to the supplier and actual expenditure for attending "FALLS
CALL" as well as for the joint inspection to be carried out shall have to be born by the
supplier.
During the tenure of rate contract, if "FALLS CALL" reported for three times or more it
will be treated as Beach of contract and security deposit shall be forfeited and firm
shall be liable for "BLACK LIST" for three years at the discretion of GWSSB.
43. DOCUMENTS / INFORMATION:
Following documents/Certificates / information should be invariably incorporated with
Cover in physical form.
1. Attested copy of Small Scale Industries / Small Enterprises Registration
Certificate if applicable.
2. Attested copy of Certificate from Industries Department regarding validity of
SSI units on the date of opening the tender.
3. Attested copy of Sales Tax Registration Number.
4. Attested copy of Certificate by Industries Department / NSIC / SSI Unit /
Enterprise / DGS&D regarding Installed Capacity of firms.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 22
5. Details of supplies made during three years alongwith the names of
purchasers as per prescribed proforma as Appendix-I.
6. Details of their sister concern or Associate firm alongwith the constitution of
firms in which any of the Partners, Directors, Relations of Partners, Directors
i.e. Wife, Sister, Daughters, Father and Mother are connected in capacity of
Proprietors/Partners or Directors of such concerns.
7. The manufacturer has to furnish the undertaking on the non-judicial stamp
paper of Rs. 20/- duly Notarized regarding his firm is not black listed / Not
BIFR Unit at the time of tendering. This undertaking should be Technical Bid
of the tender.
8. The specimen signature of authorised signatory of the tenderer shall be given
so that during the validity of contract, the correspondence from that signatory
authority will be entertained.
9. The tenderer has to give e-mail address in the tender.
10 Undertaking on Non-Judicial stamp Paper of Rs. 100/- regarding SSI
Registration.
11. A separate sealed cover of checklist.
12. Committed sparing capacity for GWSSB in Rs. 6.00 Lacs Per Month as per
note shown in ANNEXURE - II of tender documents.
13. Valid ISO:9001/2000 Certificate.
14. On Production of LR / RR with Truck No in case of LR 45/C will be issued by
Executive Engineer, the Consignee Only. Otherwise form No.45/C will not
be issued.
15. Following documents should be incorporated with bills.
1. Inspection release note duly signed TPI agency as well as
representative of GWSSB.
2. All concerned internal test report.
3. Confirmation of TPI for calibration of instrument used while inspection.
4. Raw material inspection review report and dimension test result.
5. Evidence of payment towards statutory variation.
6. Technical specification and performance while inspection in graphical
representation (as per liability concerned).
Signature of Tenderer. Executive Engineer,
P.H. Mech. Store Division, GWSSB, Gandhinagar
Place :
Date :
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 23
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
ANNEXURE - I.
List of Scheduled Banks
Sr. No. Name of Banks
A SCHEDULED PUBLIC SECTOR BANKS (1) State Bank of India and Its Associates.
1. State Bank of India
2. State Bank of Bikaner and Jaipur
3. State Bank of Hyderabad 4. State Bank of Indore
5. State Bank of Mysore
6. State Bank of Patiala
7. State Bank of Saurashtra 8. State Bank of Travancore.
(2) NATIONALISED BANKS.
1. Allahabad Bank
2. Andhra Bank 3. Bank of Baroda
4. Bank of India
5. Bank of Maharashtra
6. Canara Bank 7. Central Bank of India
8. Corporation Bank
9. Dena Bank
10. Indian Bank
11. Indian Overseas Bank 12. Oriental Bank of Commerce
13. Punjab National Bank
14. Punjab and Sind Bank
15. Syndicate Bank 16. Union Bank of India
17. United Bank of India
18. UCO Bank
19. Vijaya Bank B. SCHEDULED PRIVATE SECTOR BANKS.
1. Axis Bank Lt d.
2. ICICI Bank Ltd.
3. HDFC Bank Ltd. 4. IDBI Bank Ltd.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 24
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
ANNEXURE - II. SUPPLY OF VARIOUS SIZE OF CUBICAL CONTROL PANEL BOARD WITH AUTOMATED POWER CONTROL SYSTEM WITH SUITABLE CAPACITORS
FOR SUBMERSIBLE PUMP SETS.
Sr. No.
Description Monthly
Manufacturing Capacity in
Nos.
Monthly
Manufacturing Capacity in
Rs..
Committed Sparing Capacity
in Nos / Month.(*)
Committed Sparing Capacity in Rs. /
Month.(*)
1 2 3 4 5 6
Manufacture, Supply and
Delivery of Cubical Control Panel Board and Automated Power Control System with suitable capacitors as per detailed technical Specification.
1 D.O.L. Up to 3 H.P.PANEL
2 D.O.L. Up to 5 H.P.PANEL
3 D.O.L. Up to 7.5 H.P.PANEL
4 S.D. 8 to 10 H.P.PANEL
5 S.D. 11 to 15 H.P.PANEL
6 S.D. 16 to 20 H.P.PANEL
7 Soft Starter 21 to 30 H.P.PANEL
8 Soft Starter 31 to 35 H.P.PANEL
9 Soft Starter 36 to 45
H.P.PANEL
10 Soft Starter 46 to 50 H.P.PANEL
11 Soft Starter 51 to 60 H.P.PANEL
12 Soft Starter 61 to 70 H.P.PANEL
13 Soft Starter 71 to 80
H.P.PANEL
14 Soft Starter 81 to 90 H.P.PANEL
15 Soft Starter 91 to 100 H.P.PANEL
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 25
1 2 3 4 5 6
16 Soft Starter 101 to 110 H.P.PANEL
17 Soft Starter 111 to 120
H.P.PANEL
18 Soft Starter 121 to 130 H.P.PANEL
19 Soft Starter 131 to 140 H.P.PANEL
20 Soft Starter to 150 H.P.PANEL
21 Soft Starter 151 to 160
H.P.PANEL
(*) Note : Minimum committed Sparing capacity for GWSSB per month should be
not less than Rs. 10.00 Lacs for assorted Capacity (Consolidated) for which the tenderer are entitle to quote their rates.
Signature of Tenderer.
Executive Engineer, P.H. Mech. Store Division,
GWSSB, Gandhinagar Place :
D a t e :
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 26
GUJARAT WATER SUPPLY AND SEWERAGE BOARD
SECTOR – 10-A, GANDHINAGAR
FORMAT FOR AUTHORIZED SIGNATOR
Name of Authorised Person:
Signature of Authorised Person :
Name of Company :
Sign and Seal of Company
Date :
Time
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 27
APPENDIX - I
Statement showing the details of performance of manufacturing and supplying of various capacity of Cubical Control Panel Board and Automated Power Control System with suitable capacitors in last three years. This information should be furnished for such supplies performed and supplied to any state Government / Semi Government (Board/Corporation) authorities as well as Central Government Department.
Name of Agency ________________________________________________
Supply Order Sr No
Name of Purchaser No Date
Quantity Total Value
Details of Items Remarks
Signature of Tenderer.
Date : Place :
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 28
3) We, _______________________________________________ Bank, Ltd., further
agree that the guarantee herein contained shall remain in full force and effect during
the period that would be taken it shall continue to be enforceable till all the dues of
the GWSSB under or by virtue of the said agreement have been fully paid up and its
claims satisfied or discharged and the certificate to the effect has been received from
the GWSSB. Unless a demand or claim under this guarantee thereunder.
4) We, _____________________________________________ Bank Ltd., further
agree with the GWSSB, that the GWSSB shall have the fullest liability without our
consent and wihtout affecting in any manner our obligations hereunder to vary any of
the terms and conditions of the said agreement or to extend time or performance by
the said contractor(s) from time to time or to postpone for any time or from time to
time any of the powers exercisable by the GWSSB against the said Contractor(S)
and to forbear or enforce any of the terms and conditions related to the said
agreement and we shall not be relieved from our liability by reason of any such
variation or extension being granted to the said contractor (s) or for any forbearance,
act or commission on the part of the GWSSB or any indulgence by the GWSSB to
the said contractor(s) or by any such matter or thing whatsoever, which under the
law relating to sureties would but for the provision have effect of so relieving us.
5) We, _______________________________________________ Bank Ltd., Lastly
undertake not to revoke this during currency except with the previous consent of the
GWSSB in writing.
Dated the _____________________ day, of _______________2009 for _______
______________________________ Bank Ltd., ___________________________.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 30
GUJARAT WATER SUPLY AND SEWERAGE BOARD SECTOR -10/A, GANDHINAGAR
SPECIFICATION AIR BREAK D.O.L. STAR-DELTA AND SOFT STARTER CONTROL PANEL
Supply of fully automatic air break type panel up to 7.5 H.P. D.O.L. Star Delta from 8 -20
H.P. above 20 H.P. ATS Control Panels for Submersible Pumps suitable for operation
on 415 (+ 10% - 15%) Voltage, 3 Phase, 50 + 3% Hz A.C. Supply, Control Panels shall
be comprising of MCB/MCCB, overload relays, contactors and accessories. The details
of equipment/ accessories for each type of panels are given in enclosed data sheet.
1) ENCLOSURES:
The control panel shall be dust and vermin proof and fabricated out of minimum
1.3 mm for D.O.L./Star Delta and for Soft Starter 1.5 mm CR sheets. Control
Panel shall be wall-mounting type for DOL/Star Delta and for ATS wall mounting
-cum-pedestal type. All items inside the panel shall be mounted on steel base
plate. All metal parts shall be throughly cleaned, degreased and made free from
rust. After application of primer the control panels shall be powder coated. The
color shade of panel shall be RAL 7032. For entire panel and component
mounting plate should be orange only. Size of the enclosure should be as
mentioned in the drawing attached.
All bolts, nuts, screws, washers shall be Galvanised Zinc/ Cadmium plated and
passivated, and full protection from dust rubber lining should be provided. There
shall be cable entry for suitable size at the bottom of the control panel for
outgoing cable to submersible motor. There should be one suitable entry on
bottom of Control Panel for incoming cable. Layout on the door will be as per
drawing (attached).
The cable entries for incoming and outgoing cable shall be provided with rubber
grommets, at bottom of panel.
2) WIRING AND TERMINALS:
Power and control wiring shall be done with P.V.C. insulated copper conductor
having 660/1100 V grade insulation Control wiring shall be done with 1.5 sq.mm.
copper conductors and shall be terminated with adequately sized compression
type lugs for connections to the equipment terminals and the terminal strips.
Each wire shall be identified at both ends by PVC ferrules. Not more than 2 wires
to be terminated at one terminal and proper type and size at terminals should be
used keeping in view the components for which they are used, so, that sufficient
surface contact can be achieved. Screws and Bolts should be used as per
corresponding size and hole. That should be done to the satisfaction of
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 31
inspection authority. Incoming and outgoing connections to be made at terminals
only. Clip on type terminals shall be used for wiring up to 10mm2 and for
conductors larger than 10 mm2 bolt type terminals shall be provided. Terminal
may also be permissible on epoxy insulator with copper strip and Hardware of
proper size. The size of incoming cable should be provided as per table here
under:
TABEL - I
Sr No
Type of Control Panel Size of incoming Conductor Terminal
Terminal strip for outgoing Conductor
1 D.O.L. Up to 3 H.P.PANEL 1 x 3 x 2.5 sq.mm 1 No. - 2.5 sq.mm.
2 D.O.L. Up to 5 H.P.PANEL 1 x 3 x 2.5 sq.mm 1 No. - 2.5 sq.mm.
3 D.O.L. Up to 7.5 H.P.PANEL 1 x 3 x 4.0 sq.mm 1 No. - 4.0 sq.mm.
4 S.D. 8 to 10 H.P.PANEL 1 x 3 x 6.0 sq.mm 2 Nos. - 4.0 sq.mm.
5 S.D. 11 to 15 H.P.PANEL 1 x 3 x 6.0 sq.mm 2 Nos. - 4.0 sq.mm.
6 S.D. 16 to 20 H.P.PANEL 1 x 3 x 10.0 sq.mm 2 Nos. - 6.0 sq.mm.
7 Soft Starter 21 to 30 H.P.PANEL 1 x 3 x 16.0 sq.mm 1 No. - 16.0 sq.mm.
8 Soft Starter 31 to 35 H.P.PANEL 1 x 3 x 16.0 sq.mm 1 No. - 16.0 sq.mm.
9 Soft Starter 36 to 45 H.P.PANEL 1 x 3 x 25.0 sq.mm 1 No. - 25.0 sq.mm.
10 Soft Starter 46 to 50 H.P.PANEL 1 x 3 x 25.0 sq.mm 1 No. - 25.0 sq.mm.
11 Soft Starter 51 to 60 H.P.PANEL 1 x 3 x 35.0 sq.mm 1 No. - 35.0 sq.mm.
12 Soft Starter 61 to 70 H.P.PANEL 1 x 3 x 35.0 sq.mm 1 No. - 35.0 sq.mm.
13 Soft Starter 71 to 80 H.P.PANEL 2 x 3 x 25.0 sq.mm 1 No. - 50.0 sq.mm.
14 Soft Starter 81 to 90 H.P.PANEL 2 x 3 x 25.0 sq.mm 1 No. - 50.0 sq.mm.
15 Soft Starter 91 to 100 H.P.PANEL 2 x 3 x 25.0 sq.mm 1 No. - 70.0 sq.mm.
16 Soft Starter 101 to 110 H.P.PANEL 2 x 3 x 35.0 sq.mm 1 No. - 70.0 sq.mm.
17 Soft Starter 111 to 120 H.P.PANEL 2 x 3 x 35.0 sq.mm 1 No. - 70.0 sq.mm.
18 Soft Starter 121 to 130 H.P.PANEL 3 x 3 x 35.0 sq.mm 1 No. - 95.0 sq.mm.
19 Soft Starter 131 to 140 H.P.PANEL 3 x 3 x 35.0 sq.mm 1 No. - 95.0 sq.mm.
20 Soft Starter 141 to 150 H.P.PANEL 3 x 3 x 35.0 sq.mm 1 No. - 95.0 sq.mm.
21 Soft Starter 151 to 160 H.P.PANEL 3 x 3 x 35.0 sq.mm 1 No. - Above 95 sq.mm.
3) EARTHING :
Provision shall be provided for connecting the earth. All non-current carrying
metallic parts of the equipment shall be earthed Two “L” shaped earth bus of
aluminum (19 mm x 3 mm) will be connected between base plate and the body of
the panel. Also necessary provision o Earthing of door shall be made to connect
main Earthing.
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 32
4) NAME PLATE :
Labels shall be provided for each equipment mounted on the panel and all labels
shall be engraved in Gujarati Language on 3 ply-laminated sheets or anodized
aluminium. These shall be fastened to the panels by screws and not by
Adhesive. All mounted equipment shall have identification with paint inside the
panels. Instruction for operation of panel shall be engraved in Gujarati language
on 3 ply laminate sheet or anodised aluminium. These should be fastened to the
front side of panel door by screws and not by Adhesive.
5) ACCESSIBILITY :
Checking and removal of components shall be possible without disturbing
adjacent equipment. All auxiliary equipment’s shall be easily accessible incoming
supply terminals shall be shrouded with plastic covers to prevent accidental
contact.
6) INCOMING
MCCB should be TP and Neutral Should be separate. The operating handle
shall be front of the panel. The current rating shall be as per Table-II. Door switch
should be provided for control circuit. Such a way supply should be cut off when
door was opened.
TABLE – II
Contactor Rating as per Type 2
Sr No
Type of Control Panel
Thermal Rating of
MCCB Suitable
for Type 2 Co -
ordination
Magnetic Pickup
Breaking Capacity of MCCB
EMPR
Main Star Delta
Cap. KVA
R
1 2 3 4 5 6 7 8 9 10
1 D.O.L. Up to 3 H.P.PANEL
6.3 82 36 Ka Direct 40 0
2 D.O.L. Up to 5 H.P.PANEL
12.5 163 36 Ka Direct 80 0
3 D.O.L. Up to 7.5 H.P.PANEL
12.5 163 36 Ka Direct 80 3
4 S.D. 8 to 10 H.P.PANEL
25 325 36 Ka CT Operated
80 80 80 4
5 S.D. 11 to 15
H.P.PANEL
25 325 36 Ka CT
Operated
80 80 80 6
6 S.D. 16 to 20 H.P.PANEL
50 650 36 Ka CT Operated
80 80 80 8
7 ATS 21 to 30
H.P.PANEL
50 650 36 Ka CT
Operated
80 80 80 10
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 33
1 2 3 4 5 6 7 8 9 10
8 ATS 31 to 35 H.P.PANEL
50 650 36 Ka CT Operated
80 80 80 12
9 ATS 36 to 45 H.P.PANEL
100 1100 36 Ka CT Operated
80 80 80 16
10 ATS 46 to 50 H.P.PANEL
100 1100 36 Ka CT Operated
80 80 80 19
11 ATS 51 to 60 H.P.PANEL
100 1100 36 Ka CT Operated
80 80 80 22
12 ATS 61 to 70 H.P.PANEL
100 1300 36 Ka CT Operated
115 115 115 26
13 ATS 71 to 80 H.P.PANEL
100 1300 36 Ka CT Operated
115 115 115 30
14 Soft Starter 81 to 90
H.P.PANEL
150 1500 36 Ka CT Operated
115 115 115 34
15 ATS 91 to 100 H.P.PANEL
150 1950 36 Ka CT Operated
150 150 150 38
16 ATS 101 to 110
H.P.PANEL
150 1950 36 Ka CT Operated
150 150 150 42
17 ATS 111 to 120
H.P.PANEL
220 2420 36 Ka CT Operated
185 185 185 46
18 ATS 121 to 130
H.P.PANEL
220 2420 36 Ka CT Operated
185 185 185 50
19 ATS 131 to 140
H.P.PANEL
220 2420 36 Ka CT Operated
185 185 185 54
20 ATS 141 to 150
H.P.PANEL
220 2420 36 Ka CT Operated
265 265 265 58
21 ATS 151 to 160
H.P.PANEL
320 3500 50 Ka CT Operated
265 265 265 62
Ø All motor feeders should be provided with Electronic Motor Protection relay.
Ø All the MCCB should be Magnetic Tripping Type Only.
Above chart is for Indicative purpose, vendor should select the Ratings
as per the Type 2 co ordination chart certified by the respective
manufacturer.
Manufacturers confirmation will be required is to be produced during
Inspection and also at the time of tender submission. If the panel
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 34
manufacturer has used different manufacture product, he should
submit the different manufacture chart.
7) CONTACTORS : ( IN CASE OF DOL/STAR DELTA )
The contactors shall be air break type having Wide band coil with H class
Insulation .
AC-3 duty rating. The contactor shall be suitable for operation on 415V +10%-
15%. Current rating should be as per type 2 coordination table. All Contactors
should be suitable to perform at ambient temperature -20° C to 55° C. All
Contactor should conforms to IS13947 & IEC 947 & it should also carry CE
marking.
8) Electronic Motor Protection Relay:
(a) General The motor Protection device should confirm to IEC 60947-4-1, 60947-5-5 & 60947-8.s. The device should be suitable for operation at ambient temperature up to 50 Deg C. The components in the main circuit The device should offer comprehensive motor Protection functions including Protection, and Control functions as detailed subsequently in this specification. (b) Construction The motor protection & control device should be of the latest technology available. The device should be compact and preferably modular in construction The device should have wide band control voltage from 110 to 240 V AC/DC, as applicable. (c) Functional Requirements
(1) Protection Functions
The device shall incorporate the following protection function as standard a) Overload protection with trip class adjustable from 10 to 40 b) Phase failure protection c) Phase Unbalance d) Phase Reversal e) Unbalance protection with adjustable time delay f) Stall protection with adjustable time delay g) Under Current ( Dry Run) h) Ground Falult i) Inverse time j) Trip Cause Indication – O/L , E/F , Phase Loss , Under Current
E-Tender for Control Penal Board & Automated power control system 16.04.2009 P # 35
(2) Control Functions EMPR should have Potential free 1 No + 1 NC auxiliary contacts, which should be integrated with protection circuit to trip the contactor circuit on Fault. Additional 1 NO + 1 NC should be provided for Indication circuit.
9) Level Monitoring
Supplier should also supply level monitoring relay to monitor water level in
storage tank and give command to starter which detect water level and operate
motor start & stop. Supplier should have to also supply complete automation
system which does complete motor start & stop function without any manpower.
a) Level Monitoring Relay and Time Switch
- Relay should have potential free contacts to communicate with starter.
- Two step monitoring level ( UL & LL)
- The 24 Hours time Switch should be provided for Pump control in
coordination with water level guard. The Starter will preliminary start /
Stop based on the time switch command adjusted and at the same
time monitoring the water level in the configured total pumping hours
required for the village.
b) Level Automation -
- Supplier has to complete the automation work with use of above
component plus Time switch such that pump start and stop without
manpower.
- Pump should start as soon as water level reduce to lower set level
- Pump should stop as soon as water level reach to upper set level
- If power fails while pump is running than pump should restart as soon
as mains return and run till water level reaches to desire level.
In case of Time Switch or Water Level Guard Failure or for additional water
requirement, A Key Operated bypass switch should be provided such that
the Starter can be still switched on if required manually.
(The above Start / Stop command will be enabled only if there is no Trip
2. Whether ISI Marking Licence is Valid at the time of
submission (If Applicable)
3. Whether tender fee is paid
4. Whether EMD is enclosed in Technical Bid
5. Whether factory is situated in Gujarat State
6. Category of Manufacturing Unit
(A) S.S.I.
(B) Medium
(C) Large
7. Whether the name & specimen signature of the authorised
signatory is incorporated in this tender.
NOTE : Please Tick Mark as applicable. Place :
Seal Signature of Manufacture
____________________
E-Tender for Control Penal Board & Automated power control system 16.04.2009
43
GUJARAT WATER SUPPLY AND SEWERAGE BOARD,
SECTOR - 10-A, GANDHINAGAR
SCHEDUE OF QUOTED RATES FOR SUPPLY OF VARIOUS SIZE OF CUBICAL CONTROL PANEL BOARD WITH
AND AUTOMATED POWER CONTROL SYSYEM WITH SUITABLE CAPACITOR.
Sr. No.
Description Unit Basic Rate
Rs./ No.
Freight including
Insurance, Loading, Unloading
and Stacking at
GWSSB Store
anywhere in Gujarat
State.
Total (Col. No:
4+5)
Excise Duty
Rs./ No.
Total (Col. No: 6+7)
G.S.T./ C.S.T. /VAT
Gross Total Per No./Rs.
(Col. No: 8+9)
Total rate in words
1 2 3 4 5 6 7 8 9 10 11
Manufacture, Supply and
Delivery of Cubical Control Panel Board and Automated Power Control Systems with suitable Capacitors as per d e t a i l e d t e c h n i c a l Specification.
1 D.O.L. Up to 3 H.P.PANEL No.
2 D.O.L. Up to 5 H.P.PANEL No.
3 D.O.L. Up to 7.5 H.P.PANEL No.
4 S.D. 8 to 10 H.P.PANEL No.
E-Tender for Control Penal Board & Automated power control system 16.04.2009
44
1 2 3 4 5 6 7 8 9 10 11
5 S.D. 11 to 15 H.P.PANEL No.
6 S.D. 16 to 20 H.P.PANEL No.
7 Soft Starter 21 to 30 H.P.PANEL
No.
8 Soft Starter 31 to 35 H.P.PANEL
No.
9 Soft Starter 36 to 45 H.P.PANEL
No.
10 Soft Starter 46 to 50 H.P.PANEL
No.
11 Soft Starter 51 to 60 H.P.PANEL
No.
12 Soft Starter 61 to 70 H.P.PANEL
No.
13 Soft Starter 71 to 80 H.P.PANEL
No.
14 Soft Starter 81 to 90 H.P.PANEL
No.
15 Soft Starter 91 to 100 H.P.PANEL
No.
16 Soft Starter 101 to 110 H.P.PANEL
No.
17 Soft Starter 111 to 120 H.P.PANEL
No.
18 Soft Starter 121 to 130
H.P.PANEL No.
E-Tender for Control Penal Board & Automated power control system 16.04.2009
45
1 2 3 4 5 6 7 8 9 10 11
19 Soft Starter 131 to 140 H.P.PANEL
No.
20 Soft Starter 141 to 150 H.P.PANEL
No.
21 Soft Starter 151 to 160 H.P.PANEL
No.
NOTE : (1) Manufacturer should be quote the rate for Cable of Water Level Guard per Mtrs. Rs……………… (2) Agency is bidding to supply the Cable for Water Level Guard at the lowest rates received in this tender. (3) The Quoted Rates of Cable for Water Level Guard is not considered during the evaluation of tender.