8/11/2019 guide_speedmaster_cd_102_en.pdf
1/6
Speedmaster CD 102
8/11/2019 guide_speedmaster_cd_102_en.pdf
2/6
2
The Benchmark of Flexibility.
Speedmaster CD 102 Creates the Ideal
Conditions for Business Success.
Prinect Press Center the high-performance control station of the
Speedmaster CD 102.
Optimum results from the very outset with the Preset Plus Feeder.
stage sheet monitoring system consisting of a multiple
sheet detector and ultrasonic and pull lay double-sheet
detectors. Shingle stream control is recommended as
an additional safeguard when processing cardboard.
The sheeter CutStar delivers the benefits associated
with the cheaper cost of reel stock.
Printing units deliver consistent quality. The printing
units of the Speedmaster CD 102 ensure quiet,
smooth and precise operation. The automated platechanger AutoPlate cuts your makeready times. The
AirTransfer system that ensures contact-free sheet
travel provides outstanding print results. Color adjust-
ment is further optimized by the software-controlled
Color Fast Solution module, which speeds up inking
unit response by 50 to 70 percent. The speed-com-
pensated dampening system Alcolor with the Vario
system for preventing hickeys achieves an incredibly
thin film of dampening solution and a consistent ink/
water balance. Modular washup devices for the blanket
and impression cylinders enable rapid and thoroughcleaning.
Straightforward operation and precision control. The
high-performance Prinect Press Center combinesthe press control system and remote color and register
control in a single central console. When changing jobs,
the innovative, process-oriented operator guidance
system Intellistart draws on all relevant information
from both the current job and the following job. While
one job is being processed, you can already be pre-
paring the next. The standard daylight lamp provides
optimum illumination for the console. The press is
depicted in cut-out profile on the integrated wallscreen
with all functions dynamically simulated. The print
sheet is displayed with ink zones depicted in their
actual width. The Prinect Press Center control station
and the Prinect Axis Control and Prinect Image
Control color measurement systems form a single
optimally integrated unit.
The perfect start for productivity the Preset Plus
Feeder. The Preset Plus Feeder is designed for high
and reliable production speeds across the entire range
of materials from 0.03 to 1 mm (0.0012 to 0.039 in).
All settings are fully automatic as a function of format
and printing stock. The Preset Plus Feeder has a multi-
8/11/2019 guide_speedmaster_cd_102_en.pdf
3/6
Inside View, Technical Data
Speedmaster CD 102
1 Preset Plus Feeder
2 AutoPlate
3 Inking unit temperature control CombiStar
4 Modular blanket washup device
5 AirTransfer system with Venturi nozzle technology
6 Ink feed system InkStar/InkStar Direct
7 Inking unit and dampening system with Color Fast Solution
8 Prinect Auto Register
Printing stock
Min. sheet size mm mm
(. in . in)
Max. sheet size mm , mm
(. in . in)
Max. print format mm , mm
(. in . in)
Max. print format
with AutoPlate
mm , mm
(. in . in)
Thickness . mm . mm
(. in . in)
Gripper margin mm mm
(. in . in)
Print output
Maximum , sheets/hour
Plate cylinder
Undercut . mm (. in)
Undercut with AutoPlate . mm (. in)
Distance from lead edge of plateto start of printing
mm (. in)
Distance from lead edge of plate
to start of printing with AutoPlate
mm (. in)
Plates
Length width mm , mm
(. in . in)
Length width
with AutoPlate
mm , mm
(. in . in)
Thickness . mm . mm
(. in . in)
Thickness with AutoPlate . mm . mm
. in . in)
The press shown here is a sample configuration. Some of the features shown are optional.
910 81114 13 1215 11 11
8/11/2019 guide_speedmaster_cd_102_en.pdf
4/6
9 Chambered blade system
10 Remotely adjustable diagonal register
11 DryStar Combination
12 PowderStar AP 500
13
14
Dynamic sheet brake
Process air cleaning system CleanStar
15 Preset Plus Delivery
Blanket cylinder
Length width
(metal-backed blanket)
mm , mm
(. in . in)
Undercut . mm (. in)
Thickness (blanket) . mm (. in)
Length width
packing sheet
mm , mm
(. in . in)
Coating plate cylinder
Length widthof metal-backed coating blanket
mm , mm(. in . in)
Length width
of coating plate
mm , mm
(. in . in)
Undercut . mm (. in)
Distance from leading edge
of coating plate to start of coating
mm (. in)
Pile heights
(incl. pile board and pile support plates)
Preset Plus Feeder , mm (. in)
Preset Plus Delivery , mm (. in)
Elevated press + mm (+ . in)
Sample configuration
Dimensions of the Speedmaster CD -+L
with Preset Plus Feeder and
Preset Plus Delivery andtwo delivery extension modules
Number of printing units
Length . m (. in)
Width . m (. in)
Height . m (. in)
6 5 4 3 2 1
8/11/2019 guide_speedmaster_cd_102_en.pdf
5/6
The advantages for your printing process:
Makeready times:Presetting the entire press by entering sheet format and grammage saves up to five
minutes on each printing stock and format change. Productivity: You achieve high production speeds of
up to 15,000 sheets per hour and short makeready and setup times thanks to the high level of automation
and minimum waste. Quality: The Venturi nozzle technology of the AirTransfer system transfers the sheets
smoothly from printing unit to printing unit. Integration: Fully integrated into the Prinect workflow, you can
benefit from the ultimate in data management at the Prinect Press Center. Environment: By reducing paper
waste, the Speedmaster CD 102 helps safeguard valuable resources.
The coating systems satisfy the highest coating
requirements. A range of coating systems can be
operated with the Speedmaster CD 102, thereby en-
abling you to meet a wide range of surface finishing
needs. You can choose between a two-roller system,
the conventional chambered blade system for high-
end gloss and spot coatings, and the Flexokit for so-
phisticated surface finishes using special coatings
that tend to foam. The Modular Coating System is a
flexible chambered blade system for the final printing
unit, which is ideal if you only occasionally need to
apply full-area coatings.
The dryers of the Speedmaster CD 102 deliver fast
production times. All Heidelberg dryers are opti-
mally geared to the press they are fitted in and to
a whole range of applications. The dryer DryStar
Combination, which is integrated into the delivery,
is the ideal solution for drying coating applications.
It combines infrared, hot-air and circulating-air mod-
ules. Optimally attuning the drying system to the
You can choose from several different systems when selecting
the coating unit for your Speedmaster CD 102.
press delivers a previously unimaginable level of
efficiency. The Speedmaster CD 102 can also be
fitted with drying units, which incorporate hot-air
and infrared dryers. UV interdeck dryers and UV de-
livery dryers with up to three lamps in the extended
delivery ensure reliable hardening of the UV coating.
The unit is operated quickly and easily at the Prinect
Press Center.
Tidy and neatly aligned the perfect pile. The Preset
Plus Delivery ensures ultra-precise pile formation.
The dynamic sheet brake decelerates the sheet in a
reliable and controlled manner. The delivery air sys-
tem ensures that the pile is formed with the neatly
aligned edges essential for optimum finishing. Pre-
cise adjustments can be made using the jogwheel
and touchscreen. All preset values are adopted from
the Prinect Press Center, which cuts your makeready
times significantly. The unique powder spray device
PowderStar AP 500 delivers efficient powder
application. The process air cleaning system
CleanStar minimizes the accumulation of dust
and odors at the press.
Some of the features specified in this document are optional. These may
differ from country to country.
All the information and details in this document are dependent on press
configurations, job structures and in-house processes.
8/11/2019 guide_speedmaster_cd_102_en.pdf
6/6
00.9
92.8
673/01en
Heidelberger Druckmaschinen AGKurfuersten-Anlage 526069115 HeidelbergGermanyPhone +49 6221 92-00Fax +49 6221 92-6999www.heidelberg.com
Publishing InformationPrinted in: 04/08Photographs: Heidelberger Druckmaschinen AGPlatemaking: SuprasetterPrinting: SpeedmasterFinishing: StahlfolderFonts: HeidelbergGothicMlPrinted in Germany
TrademarksHeidelberg, the Heidelberg logotype, Alcolor, Axis Control,CleanStar, CutStar, DryStar, PowderStar, Prinect, Speedmasterand Stahlfolder are registered trademarks of HeidelbergerDruckmaschinen AG in the U.S and other countries. PrinectPress Center and Suprasetter are trademarks of HeidelbergerDruckmaschinen AG in the U.S. and other countries. All othertrademarks are property of their respective owners.
Subject to technical modifications and other changes.