8/6/2019 Guide ISCS
1/19
Installation Guide
Invoice SummaryCapturing System
( ISCS )
1
8/6/2019 Guide ISCS
2/19
IMPORTANT
STEPS FOR
INSTALLING THESOFTWARE
On PC & Client
Server Environment
Pakistan Revenue Automation (Pvt.) Ltd.CBR House, Constitution Avenue, Islamabad.
Tel: (051) 111 772 772
2
8/6/2019 Guide ISCS
3/19
PRE-REQUISITES
HARDWARE REQUIREMENTS:
1. 486 / Pentium or Higher.2. Floppy Diskette drive 1.44 MB3. Minimum 60MB space should
Be available on the Hard
Disk4. 132 Columns Printer for
Stock Statement report
SOFTWARE REQUIREMENTS:
1. Windows 97, 98, 2000, XP2. WinZip (Available on this CD
- Install it first)
SETTINGS1. Print is only possible with
the default printer. Sochange the default printeraccordingly.
3
8/6/2019 Guide ISCS
4/19
If the software (ISCS) is already installed atyour computer, before installing the new
version kindly remove the previous version.Steps to remove the previous version are
attached at the end of this document.
4
8/6/2019 Guide ISCS
5/19
FOLLOWING ARE THE STEPSTO INSTALL THE SOFTWARE
ON PC (Personal Computer)
5
8/6/2019 Guide ISCS
6/19
Steps:Download or insert the software CD and extract the zip file (ISCS.zip)
When files extracted then double click the file setup.
First following screen appear on the desktop Press yes and complete theinstallation.
6
8/6/2019 Guide ISCS
7/19
Then complete the installation of crystal Fix which will be displayed after firstinstallation.
Now following screen appears.
Figure aPress the Next Button (Figure a).
7
8/6/2019 Guide ISCS
8/19
Figure b
Press the Yes Button (Figure b).
Figure C
Press the Next button (Figure C)
8
8/6/2019 Guide ISCS
9/19
Figure d
Type anything in Serial Number, the Next button activates. Press the
Next button (figure d).
9
8/6/2019 Guide ISCS
10/19
Figure e
To install the software at folder shown in the destination folder
click Next button Otherwise, press Browse button and select the
appropriate destination (drive and path) where that software is to
be installed. (figure e)
Figure f
Select Typical or Custom, and press Next Button. (Figure f)
10
ISCS
8/6/2019 Guide ISCS
11/19
Figure g
Press the Next button (figure g).
Figure h
Press the Next button (figure h).
11
ISCS
8/6/2019 Guide ISCS
12/19
figure I
On completion of installation process completes, press the Finish
button. (Figure I)
12
ISCS
8/6/2019 Guide ISCS
13/19
INSTALLATION PROCEDUREOF INVOICE SUMMARY
CAPTURING SYSTEM FORCLIENT SERVERENVIRONMENT
13
8/6/2019 Guide ISCS
14/19
Install ISCS software on DB server and on clients.
Please follow the below mentioned steps:
STEP1:
1. configure the ODBC using the following Steps:
Double click My Computer icon on desktop
Double click control panel icon
Double click on the ODBC data source icon (In case of
Windows 2000, double click the button Administrative Tools
and then ODBC data source icon will appear)
Select User DSN tab and then press the Add button. A list of
Driver will appear on the screen namely Create new data
source
Select the Microsoft-Access Driver (*.mdb)
Press the finish button
2. A screen labeled ODBC Microsoft Access setup will appear. Enter
ISCS at Data Source Name
3. At Database Frame press Select button. A screen labeled Select
Database will appear.
4. Press the Network button and a Screen will appear labeled Map
Network drive
5. For Windows 2000,press the browser button, a screen labeled
Browse for folder will appear. In this screen a list of Groups orDomain will appear. From the Browse List
Select your required database computer
Select database path
Select ISCS
Press Finish button and then press OK button
Select invoicebill.mdb and press OK button twice
For Windows 98 environment
Select Drive and then enter path name in the format \\destination
computer name ( DB Server Name)\drive name\ database path(program files\PRAL)\ISCS. Path name PRAL name is default
you can change it. Press Ok button and select ClaimantDB.mdb.
Press OK button twice
14
8/6/2019 Guide ISCS
15/19
Please follow the below mentioned steps:
STEP2:
1. configure the ODBC using the following Steps:
Double click My Computer icon on desktop Double click control panel icon
Double click on the ODBC data source icon (In case of
Windows 2000, double click the button Administrative Tools
and then ODBC data source icon will appear)
Select User DSN tab and then press the Add button. A list of
Driver will appear on the screen namely Create new data
source
Select the Microsoft-Access Driver (*.mdb)
Press the finish button2. A screen labeled ODBC Microsoft Access setup will appear. Enter
ISCS at Data Source Name
3. At Database Frame press Select button. A screen labeled Select
Database will appear.
4. Press the Network button and a Screen will appear labeled Map
Network drive
5. For Windows 2000, press the browser button, a screen labeled
Browse for folder will appear. In this screen a list of Groups or
Domain will appear. From the Browse List
Select your required database computer
Select database path
Select ISCSB
Press Finish button and then press OK button
Select invoicebill.mdb and press OK button twice
For Windows 98 environment
Select Drive and then enter path name in the format \\destination
computer name ( DB Server Name)\drive name\ database path
(program files\PRAL)\ISCS. Path name PRAL name is defaultyou can change it. Press Ok button and select STARRDB.mdb.
Press OK button twiceNote: Reports generation and backup should be carried out from Database
Server.
15
8/6/2019 Guide ISCS
16/19
User Guide
16
8/6/2019 Guide ISCS
17/19
HOW TO RUN THE ISCS SoftwareStep 1.To run the software, at window Desktop, double click the ISCSicon, or
Step 2.As the system runs, it requests for the login ID and the password.
Initially enter the following user id and password to access the
system.
User ID : cbrPassword: cbr
Step 3.When the software runs for the first time, On the Main Menu, Select
Claimant Profile and fill out the form. The information provided will
be used in different forms of the software.
17
NOTE: Software is supported by a help on each screen, press F1for help
ISCS
8/6/2019 Guide ISCS
18/19
Steps to remove the already installed
software
(IT IS VERY IMPORTANT TO REMOVE THE ALREADY INSTALLED
SOFTWARE BEFORE INSTALLING THIS NEW VERSION OF
SOFTWARE)
1. Double click the icon, the following screen appears.
Select the Remove option and press the Next button.
Press the OK button
18
8/6/2019 Guide ISCS
19/19
Press the Finish button.
19