-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 1/26
rich hathaway
changoleon
PDA
CDMA Gurus > CDMA Devices > CDMA Iphones > Guide : How
to write a new .prl to v-iphone 4 without openssh-(the simple
way)
View Full Version : Guide : How to write a new .prl to v-iphone
4 without open ssh-(the simple way)
04-21-2011, 10:01 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.[hide-thanks]
1- download the diskaid file to pc.
2, rename your prl to 310VZW.prl and place it in a folder on
your pc
3, open diskaid, plug your phone,when it shows up navigate on
diskaid to
/system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle it doesnt matter which,they both writeback to
each other.
there you will see the 310VZW.prl file.
4, now open the file you renamed with your prl and simply drag
and drop the one you rename onto the onethats in the diskaid window
and click overwrite to the warning that pops up,it will overwrite
it,then close all that out,the rest is done on the device.
5,open cydia via wi-fi and tap manage/sources/edit/add
then type this new source in sinfuliphonerepo.com then click add
source.
then click ok to the warning it throws.
after it updates click return to cydia tap the new source you
just added and scroll down
to iFile Cracked then tap install,then confirm,then go to it on
your springboard open it &
navagate to /system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle
tap which ever one you choose to open it,tap carrier plist,then
tap property list viewer, then scroll down tojust below the
signatures to prlpushflag and switch the boolean to show on. tap
done.
6, power off phone,then back on.
7, then go back to the boolean we just changed,and change it to
off again,
8, then power iphone 4 back off,and then on again.
done. check by dialing *#5005*4357# then send
below is diskaid--[Only registered and activated users can see
links] ([Only registered and activated users can see
links])[/hide-thanks]
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
04-22-2011, 02:20 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 2/26
ownmart
rich hathaway
RBburrus
rich hathaway
RBburrus
whitey10tc
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
GOOD Job Nice Goig Rich
04-26-2011, 09:10 PM
ive tried this with 4399 and 42900 prl neither stick, am I
supposed to do anything else on disk aid other thenwhen it asks to
overwrite and say yes?
I did the whole thing 3 times to see if i missed anything
04-26-2011, 10:39 PM
ive tried this with 4399 and 42900 prl neither stick, am I
supposed to do anything else on disk aid other thenwhen it asks to
overwrite and say yes?
I did the whole thing 3 times to see if i missed anything
its not working on some phones,i got one that would'nt work a
couple of days ago and just got it workingtoday.
i restored to fresh snowbreeze 4.2.6 first,but i think it will
work without restoring,i mean depending on whatyou've done up to
here.
i think if you uninstall any tetherme app or any other thether
type of app and then reinstall it, i used TetherMeCracked from
sinfuliphonerepo.com
i just restored and installed TMC,restarted and then try to
write again,and it was now working. i tried beforeon this phone on
3 different pc's, xp &win7, different cables,you name
it,nothing worked,prl remained. butthat got it to write this
time.
if when you switch the boolean it does not loose signal after
the first reboot you might as well stop andrestart.
let me know if it works for you,i cant retry until i get another
one that wont take it.
05-02-2011, 08:40 PM
I'm trying to locate detailed instructions on how to do this so
I can go in and change the prl to a cricket prl soI can connect my
I-phone 4 thanks
05-02-2011, 08:59 PM
read the first post in this thread. do you need more details
than that?
05-02-2011, 09:05 PM
can't see it, it says "You do not have sufficient rights to see
the hidden data contained here"
05-02-2011, 09:38 PM
Have you clicked the thanks if so pm me and I can see what's
going on.
Posted from my HERO_cricketized via gurus mobile app.
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 3/26
RBburrus
rich hathaway
DiaBlo666
RBburrus
rich hathaway
Oo Montreechai
RBburrus
rich hathaway
05-03-2011, 06:19 PM
thanks whitey where I'm still kind of lost when it comes to how
to do this I guess this is over my head as ofnow but I'm going to
attempt to fix that so sorry for the questions. First how do you
change the prl namebefore you plug in the phone and what exactly
are you renaming whatever it is your saying to rename for,shouldn't
you be renaming it to a cricket prl not the vzw prl. Also when I
did plug the iphone on and startedlooking for the next steps which
are "/system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle itdoesnt matter which,they both write back to
each other." I cant seem to find this on the diskaid I guess
i'mdoing something wrong any help would be appreciated.
05-03-2011, 09:25 PM
thanks whitey where I'm still kind of lost when it comes to how
to do this I guess this is over my head as ofnow but I'm going to
attempt to fix that so sorry for the questions. First how do you
change the prl namebefore you plug in the phone and what exactly
are you renaming whatever it is your saying to rename for,shouldn't
you be renaming it to a cricket prl not the vzw prl. Also when I
did plug the iphone on and startedlooking for the next steps which
are "/system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle itdoesnt matter which,they both write back to
each other." I cant seem to find this on the diskaid I guess
i'mdoing something wrong any help would be appreciated.
change the name by right clicking on the prl.--if you deviate
from the guide,it will not work.just do like itsays,it is
right.with diskaid you first look for / that symbol is the name of
the directory,then you go to systemthen go to library thgen go to
carrier bundles and so on.
05-04-2011, 12:18 AM
Even simpler way is just to activate your viphone on cricket and
dial *22804 and just wait til it finish. ( youcan be on the $45 or
$55). If you want to go back to verizon just dial *22801 and hit
1.
Thanks me later :)
05-04-2011, 01:55 PM
I tried the #22804 and it said it couldn't activate the
phone...............thanks Rich
05-04-2011, 02:56 PM
a tip for you and the ota programming is you will have to try it
more than once. it has taken me sometimes10 or 12 try's before
success.when you dial it and it hangs up right away it is because
it needs to roam for it to work,(verizon does notwork with
*2804,only *228)so watch the signal bar,and after you call and it
hangs up signal will be lost for afew seconds,that is your
oppertunity to call it again (quickly) and get it to roam to
complete the call.
05-04-2011, 05:13 PM
I use verizon iphone 4.
I did ESN added to MetroPCS already. $20
I dial *228 then press 2 to update roaming capability, then wait
until it's done.
Then next?????
Please.....
05-04-2011, 05:31 PM
is the cricket prl just one code or is it mulitiple and what do
you put in this file you have renamed just the onecode or the list
that I downloaded from the other thread
05-04-2011, 06:20 PM
dude the prl is a file not a code.they have a number to identify
them and the number tells the capability orwhat the prl is for,some
are roaming some evdo ect.if you "put anything in this file" your
are gonna f**k it
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 4/26
RBburrus
rich hathaway
RBburrus
RBburrus
rich hathaway
motley28
Oo Montreechai
rich hathaway
Oo Montreechai
rich hathaway
up.it is simple,just follow the directions i wrote,dont add
anything or take anything away or it will not work.
really it is a simple procedure for this phone,i can do it in a
minute or so,a first timer should be able to do it in10.
i might suggest for you to check out this [Only registered and
activated users can see links]
and the other couple of basics write ups to get a better
understanding of phone flashing.
05-04-2011, 06:32 PM
thanks rich I have no issues with the directions sorry for the
inconvience I am accustomed to writing codeand webpage development
not cell phones this is all new to me, my problem is finding a prl
code that isindictive to the cincinnati area. I have found so many
codes and downloaded a zip file with about 100 of themi'm trying to
make sure I have the correct one
05-04-2011, 06:44 PM
for iphone 4 use the 42600 prl.it is a nationwide ev prl so it
will work for you and is posted in the cricket prlthread here in
the forum.
05-04-2011, 06:55 PM
Thank you sir I appreciate it
05-04-2011, 07:11 PM
and it worked the first time thanks
05-04-2011, 07:29 PM
i am glad to hear this.
05-04-2011, 07:34 PM
I used *22807 and voila it worked perfect. Still having some
problem with text like last time. I think the codeis regional. You
guys think. My buddy says he's gonna work on the text and for me to
give him a ringmanana. Ill let you know if i find any new
stuff.
05-04-2011, 09:21 PM
I am sorry. I am noob.
How/where do I get the .prl file?
05-04-2011, 09:49 PM
we have a cricket prl thread
here---> [Only registered and activated users can see
links]
05-04-2011, 10:11 PM
I do until this step
6, power off phone,then back on.
It don't turn on. Stuck at apple logo.
What should I do?
05-04-2011, 11:09 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 5/26
Oo Montreechai
Oo Montreechai
rich hathaway
motley28
Oo Montreechai
Oo Montreechai
sometimes it takes several minutes to boot up.if it really is
stuck try hard reset.(hold home and pwr until itflashes off and
then back on.then release) if that does not work
you should try to kick it out of recovery with tiny umbrella,it
is posted here in the forum,or last but not least ifall else fails
you will have to recover it in itunes.
05-04-2011, 11:58 PM
tried hard reset, recovery with itunes but all failed.
Now I cant even recovery or restore with itunes (error 1013)
will try tiny umbrella (haven't seen yet)
thank you so much for your help.
05-05-2011, 02:32 AM
this solution works only for Cricket prl?what if I had MetroPCS
prl file?
05-05-2011, 04:43 PM
does not make any difference what the prl is.you need to use
ireb 4.1 first to enter pwnd dfu mode and thenshift click restore
in itunes and then select your ipsw and it will work.
but really i think if you kick it out of recovery with tiny
umbrella i think you will be ok.always use itunensrestore as a last
resort.
let us know how you get along.
05-06-2011, 02:36 AM
I had the same problem when I screwed my iPhone up it took a
while to restore. I had the 1013 errorpopping up also. Could be
cable,connection, Itunes version. Here's what i did. I switched
from my laptop(which accessed the internet via connecting to my
router wirelessly) to my desktop which was connected torouter via
ethernet. My desktop also had an older version of itunes(I think
just the very previous one). Put itin DFU mode, not recovery, make
sure you know difference. But I had to use the option of itunes
checking forupdate and restoring from Apple with 4.2.7 firmware.
this worked and got me to a working UNActivatediphone on Verizon.
then I found how to jailbreak 4.2.7 with new redsnow, a good copy
of 4.2.6 firmware andfollowing istructions that I found from link
around this forum that leads to youtube vid on HOWTO. After
thejailbreak completed Had to go in Cydia and add pushfix.info
repo. Through this repo I installed i installedVerizon Untether for
4.2.7 package and bang it was untethered jailbroke. then I spent
hours trying to get it oncricket. Finally walked into local dealer
and he told me to dial *22807(keep in mind I had already made
theESN live with Cricket service. When i dialed *22807 I got the
"Welcome to Cricket" OTA programming. Bamits on Cricket again.
weird thing though is I can text to other carriers this time and
some of them receive thetexts where as last time I couldn't send or
receive to any other carrier but cricket. I still can't receive
fromany other carrier than cricket though. I think I'll have most
the answers for my iPhone tomorrow and Illshare. Hope it will help
some peeps.
05-06-2011, 11:54 PM
Now I can restore my iphone4 using iTunes. I change from iMac to
MacbookPro.
I'd like to start it over but I don't know how I can find a
working MetroPCS prl file.
05-07-2011, 05:30 PM
Did it through final step. Nothing happens. Same verizon
signal.
I use MetroPCS prl found in a thread. It's 3018.prl
Have no idea to go further.
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 6/26
rich hathaway
Oo Montreechai
rich hathaway
Oo Montreechai
rich hathaway
BillA
nextelmods
nocturnaltampa
05-07-2011, 06:17 PM
Did it through final step. Nothing happens. Same verizon
signal.
I use MetroPCS prl found in a thread. It's 3018.prl
Have no idea to go further.
i will try to help you, tell me exactly what you have done so
far and where you are at now
05-08-2011, 12:24 AM
Thank you so much. Mr Rich
This is my situation.
1. I jailbreak iPhone4 Verizon using Redsnow2. I activated to
Vderizon3. I have someone add MEID to MetroPCS inventory, charged
$20.4. I tried to activate to MetroPCS online in its website but
didn't work.5. So I call a Metro CS. She helped me activate new
account, give me a new number then she asked me totry a test call.
I said I don't know how to activate the device. When she knew it's
iPhone4, she had no ideaabout it and told me to go to a corporate
store.6. After ESN added to MetroPCS, Verizon account is dead,
saying there's error verification. I can't use thephone now.7. I
follow instructions from this thread. I got a prl file from
MetroPCS's PRL thread.8. Nothing happens, still got no signal from
MetroPCS. Check PRL still 55607 or something.
Can I send it to you????
05-08-2011, 09:36 AM
you can send it to the store,but please call us first.our number
is at the top of the page [kc phone and flash]we are closed on
sundays
05-08-2011, 05:38 PM
I live in NYC. I read at Howardforum that flashed phones can't
be used in New York. Is it true?
05-08-2011, 08:50 PM
i have a list of aws markets and ny is not on it,that does not
mean it isnt,my list is a year or 2 old.try googleand see what you
can find
05-12-2011, 02:23 AM
You can also easily edit the Plist with this free editor, then
write it back using diskaid. Scroll down to line #75and edit the
true/false flag.
[Only registered and activated users can see links]
Enjoy,BillA
05-16-2011, 08:37 PM
can u repost the link its broken thanks !
05-17-2011, 09:18 AM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 7/26
rich hathaway
nocturnaltampa
RBburrus
rich hathaway
RBburrus
rich hathaway
RBburrus
RBburrus
rich hathaway
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
hmmm the change the boolean didnt do much for me, i can update
my roaming list, im on the metro network,my acct has correct meid,
the problem is #1 my phone number on the phone is showing incorrect
its not myarea code and number its 0000004721 and there is no way
to edit that, when i make a call i get the makecollect
call....etc
05-17-2011, 10:02 AM
i am not in a metro market so my metro knowledge is limited to
what i have heard/read,the easy way towrite it is to ota,if you
cant you can write it manually,first you need the correct prl in
it.did you follow theguide to write your prl with diskaid?
05-19-2011, 12:08 AM
yes i did, put correct prl, the issue is the programming, im
probably doing something wrong with otaprogramming for metro?
05-23-2011, 07:40 PM
Hey Rich got a question I got rid of the first iphone 4 I did
and grabbed another to do it again and I ran into aproblem I did it
just like before but I had an issue with the phone taking the prl
code it wouldn't accept on thephone it keeps keeping the verizon
prl code any suggestions
05-23-2011, 08:40 PM
i think if you delete any tether app and program then resart and
retry,if still no then reinstall TetherMe thenrestart and give it a
try again. i think that will work for you
there is a step by step for this hear in the iphone forum.the
search window should bring it up.let me know ifyou need it and cant
find it.
05-23-2011, 09:16 PM
thanks.......The first time I didn't download any tether app are
you meaning already on the phone? and yea ilooked and can't seem to
find you think you could let me know link thanks buddy......o did
you guys get thatapp up and running?
05-23-2011, 10:08 PM
check this thread [Only registered and activated users can see
links](the-simple-way)
notice anything about it? its this thread.just read it from the
begining dude.
05-24-2011, 02:03 AM
O sorry yea didn't realize I looked in just iphone in the search
box thanks for the help
05-24-2011, 06:11 PM
also I looked but didn't see any threads for this question if
the iphone has 4.2.8 and i'm attempting todowngrade it to 4.2.6 to
attempt this again I can't get the .zip file to convert into a
.ipsw file to restore it into4.2.6......any suggestions
05-24-2011, 07:06 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 8/26
RBburrus
rich hathaway
RBburrus
rich hathaway
RBburrus
rich hathaway
RBburrus
RBburrus
rename it to .ipsw and make sure that winrar or whatever your
using does not stick the .zip back on it. thenuse ireb first to
enter pwnd dfu mode then shift click restore in itunes and select
your file.might not workunless you use a custom ipsw file instead
of a stock one. there is a custom 4.2.6 ipsw i made posted in
theiphone forum if you need.
also use a different browser to dl ipsw other than ie like for
instance use firefox or safari. ie does not handlethe file
correctly and will result in a unusable ipsw
05-25-2011, 01:25 PM
I tried it but wouldn't allow me to downgrade goes all the way
up to authenticating with itunes/ apple and thengives me an error
message saying that I am not allowed to downgrade. I also tried
jailbreaking it and cachingapples signature server so that it would
think that the phone would think it's communicating with apple but
isreally communicating with cydia the instructions I followed are
as follows
a server that duplicates the functionality exposed by Apple's
signature server, except using "on file" resultsrather than live
requests.All we need, then, is to make iTunes use it. Luckily, most
operating systems also have the ability to locallydefine bypasses
on specific hostnames through a file called hosts. Using this, we
can redirect requests toApple's signature server to Cydia.So, open
the file C:\Windows\System32\drivers\etc\hosts (Windows) or
/etc/hosts (Mac OS X) and add thefollowing entry to the bottom of
the file.74.208.10.249 gs.apple.com
I used this and had no such luck but the phone is jailbroken
would the steps from before i.e. on the first pageof this thread
work for 4.2.8 to rewrite the prl to flash it?
05-26-2011, 10:10 AM
yes it will work for 4.2.8 however one thing is missing from
that guide on changing the host file,you need toremove all other
appe addys from the bottom,anything that says .gs.apple so you only
leave one also youneed to use administer priv. to do it. when done
go back and check to make sure it saved.
but having said that i may be wrong but i believe you wont be
able to downgrade without using a customipsw,the stock one wont
work. and are you using ireb first?
05-26-2011, 12:59 PM
Yea i used snowbreeze to jailbreak it cydia downloaded
fine....and if I can flash it on 4.2.8 i'm not worriedabout
downgrading the only purpose to downgrade was to duplicate the
exact circumstances that I had beforeon the first iphone I flashed
with out any problems.......if I follow the instructions on the
first page will thiswork or do I need to change the signatures in
the notpad like I was saying before and you referenced. I don'tcare
about downgrading if I can use this post to flash.
05-26-2011, 01:49 PM
you can write the prl to it regardless of firmware.use the same
method you did before.
05-26-2011, 01:55 PM
I did it it worked my only issue now is that ota doesn't work it
just says the call can't be completed as dialed
05-26-2011, 02:19 PM
you metro or cricket
05-26-2011, 02:58 PM
It's on cricket
05-26-2011, 03:08 PM
I actually figured it out so everyone it needs to be added to a
cricket account and then *228 will work
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 9/26
djisia87
oraleholmes
rich hathaway
oraleholmes
rich hathaway
amaciasv87
rich hathaway
vavphonezone
rich hathaway
05-29-2011, 07:45 PM
thank you..
06-02-2011, 12:51 PM
i cant for the life of me get the prl to stick. followed the
directions perfectly, dont lose signal when the flag isswitched to
on. Even tried open ssh, this is on 4.2.6 any other tips? Im about
to restore the phone and startover should i use the oem 4.2.6 or
rich's modded one?
06-02-2011, 01:52 PM
remove any and all tether or tetherme apps then reinstall it
then try again-- or restore with a custom ipswthen add the repo
sinfuliphonerepo.com get and dl the TetherMe app from there,then
try to load your prlagain
06-02-2011, 03:08 PM
link to the ipsw file? i had un installed the tether me before
and installed the cracked one from that repo didntfix anything
06-02-2011, 11:23 PM
i have one posted here in the iphone forum,but you can cook one
yourself with snowbreeze if you cant findmine.
06-08-2011, 06:36 PM
Hi, first post and a big newbie about iphones so please be
patient with me :(
-I got the iphone jailbroken with Snowbreeze 2.7.3 and IPSW
2.4.8 it got me cydia-Then installed the repository from it and the
program to navigate.-downloaded this .plr ([Only registered and
activated users can see links]) the latest one 3018, renamed it
asit says-Used DiskAid and placed it in the right folder, I checked
it by doing the *#5005*4357# then send part. MyPRL version is 3018
and my ERI version is 6.-As a result, my iphone network (the bars
and provider name) changed from just showing me bars toshowing me a
Extended tag next to the bars. When I choose:
Settings>>General>>about: the network saysExtended too
but the carrier still says Verizon 10.1
So now I dont know how to get my MetroPCS number in my iphone, I
don't have a verizon number toactivate the iphone. What's the next
step, or if I skipped a step, how do I get my MetroPCS number, now
thatI have changed the PLR.
Thanks very much!
06-08-2011, 10:36 PM
read this thread.it will help you. we have a metro iphone
section. on the main forum page click metro pcsthen iphone.
[Only registered and activated users can see
links]!!!-it-is-working-but-no-web
06-21-2011, 11:31 PM
i think i bricked my iphone. i did all the step and it wont even
get past the greenposi0n logo. plz inform me onhow to get my iphone
back. but i must say something wasnt done right because from
reading earlier postyour phone is suppose to lose signal mine never
lost signal.
06-22-2011, 09:12 AM
reload your ipsw , use ireb first to get into pwnd dfu mode then
shift click restore in itunes and select yourcustom ipsw.that will
restore your phone to a workin state. if you dont loose signal when
tryin this then like
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 10/26
RBburrus
jayh42
luisny
samsungd415
captainkirks
doublespaces
Wrecked Johnson
ownmart
the thread says remove any and all tetherme or any thether apps
you have then try again.
07-18-2011, 03:11 PM
You can now use jailbreakme.com also to jailbreak makes it a lot
easier just go to link on phone and you canjailbreak in less then 4
mins then follow same steps as before to change the .prl
07-27-2011, 03:07 PM
Rich, this is a very good guide on writing the prl (insert
carrier) and just leaving a thank you is not enough.For the peeps
having trouble, check in ifiles and make sure when you toggle the
bolean switch edit is on.Fixed every one we had trouble with
here.
08-31-2011, 05:48 PM
Hi. rich hathawayI need a Help! to do this step??navagate to /
system / library / carrier or zeppelin_us.bundle
bundles/iphone/310vzw
I see files in Iphone, but I do with these files?
6, power off phone,then back on.
7, then go back to the boolean we just changed,and change it to
off again,
8, then power iphone 4 back off,and then on again.
thanks !!
08-31-2011, 06:33 PM
you guys have to "read First" REad it like 5 time before you
doing anything to your phone. then you readagain and do. Most of
Noobs happy to pretend they are professional and ass they read the
first sentence gotall hyper and then no idea what they doing and
just do. so REad REad REad. Dont step on the third step of thelater
when you have not even know where the first one is.
08-31-2011, 07:34 PM
you guys have to "read First" REad it like 5 time before you
doing anything to your phone. then you readagain and do. Most of
Noobs happy to pretend they are professional and ass they read the
first sentence gotall hyper and then no idea what they doing and
just do. so REad REad REad. Dont step on the third step of thelater
when you have not even know where the first one is.
My teacher is alive. someone been hiding.
09-02-2011, 01:28 AM
Okay, I have an issue. I am jailbroken 4.2.10 with redsn0w beta
7. I opened diskaid, placed a coupledifferent cricket prl's, 426000
and 38515 and once its copied in, I go to ifile, change
carrier.plist to ON for theprlpushflag then click done and then
reboot my phone. It comes on with bars and no verizon label, PRL is
stillverizon. I change the flag to OFF and then reboot and it comes
back verizon logo and same PRL. I have notinstalled any tether
apps, in fact I see no instructions that say to do so I just see
the recommendation toremove them. This is a tethered jailbreak FYI
and I reboot the phone with redsn0w each time.
09-17-2011, 05:19 PM
i am hoping this is ok with the mods and owner if not just take
it down but rich's link to diskaid is not workingso here is a
working link [Only registered and activated users can see
links]
enjoy
09-18-2011, 12:00 AM
Okay, I have an issue. I am jailbroken 4.2.10 with redsn0w beta
7. I opened diskaid, placed a couple
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 11/26
BillA
aph
rich hathaway
jusfixit
rich hathaway
lindiboy
2day4speed
lindiboy
itsfun
salfasano
different cricket prl's, 426000 and 38515 and once its copied
in, I go to ifile, change carrier.plist to ON for theprlpushflag
then click done and then reboot my phone. It comes on with bars and
no verizon label, PRL is stillverizon. I change the flag to OFF and
then reboot and it comes back verizon logo and same PRL. I have
notinstalled any tether apps, in fact I see no instructions that
say to do so I just see the recommendation toremove them. This is a
tethered jailbreak FYI and I reboot the phone with redsn0w each
time.
This process works on like 1/10 that I've noticed. you can
simply activate and dial *22804 then program inifile...done
09-29-2011, 06:33 AM
This process works on like 1/10 that I've noticed. you can
simply activate and dial *22804 then program inifile...done
You can't change an already activated/used phone, because it
will not pick up any changes till you restore thephone fresh and
then do the JB/iFunbox mod.Tested and it works all the time!!
Enjoy,BillA
10-14-2011, 11:42 AM
Has anyone tried this with 4S? Same process?
10-14-2011, 01:15 PM
no not until untethered jb is out...must be untethered jb'n to
work
10-14-2011, 04:29 PM
I know This is A cricket tread but im trying to get it back to
verizon how can i do that i thied this method anyother ideas
10-14-2011, 05:26 PM
just restore in itunes and boom badda bing its verizon
10-14-2011, 05:54 PM
Hi Rich i have the iOS 5 installed and i can't find the
310VZW.prl in that folder any help please
10-14-2011, 06:21 PM
it is now called carrier.prl
10-20-2011, 02:36 AM
it is now called carrier.prl
i did it on iOS5 it worked fine for me even thou its a tethered
jailbreak it works turned the phone off on it stillworks
10-20-2011, 09:48 PM
did a fresh update to ios5 and still have metropcs prl. any
ideas on what im doing wrong?
11-02-2011, 08:47 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 12/26
salfasano
whitey10tc
rich hathaway
salfasano
rich hathaway
salfasano
salfasano
rich hathaway
salfasano
calisoldier83
rich hathaway
TUAN1163
Tried to get a Verizon iPhone to use the carrier.prl from the
Sprint_US.bundle on iOS5 with this method. WhenI reboot the second
time it's stuck on "No Service" and when I go into settings there's
no .prl. Any ideas?
11-02-2011, 08:49 PM
After I reboot a 3rd time Carrier is Not Available and PRL is
31001. Still no service
11-02-2011, 09:26 PM
After I reboot a 3rd time Carrier is Not Available and PRL is
31001. Still no serviceHave you tried reseting thedevice.
11-02-2011, 10:46 PM
refresh our memory's if you would as to what model ip you have
and what prl you need on the phone.
is the prl boolean off ? it needs to be off except when your
implementing a new prl to the phone.
11-02-2011, 10:49 PM
I have a Verizon iPhone 4 8GB. Trying to get the Sprint carrier
settings on the phone. The new iPhone 4 withiOS 5 on it has a bunch
of carrier settings at /System/Library/Carrier Settings/iPhone
11-02-2011, 11:36 PM
does your phone have a sprint bundle in that menu?
11-02-2011, 11:36 PM
I'm reading a lot of stuff about patching CommCenter? Could that
have something to do with it? Sorry if thesequestions don't make
sense I'm new to this iPhone stuff.
11-02-2011, 11:37 PM
Yes Sprint_US.bundle
11-03-2011, 12:09 AM
do you know if sprint will activate your esn?and i will say this
--alot changed in 5.0 there is still alot of unknowns with that os.
but ota programming woulddef be the easiest way to provision
it.
11-03-2011, 10:02 AM
yes i activated it but i can't connected to their network so i
had them switch it back to my blackberry. i triedOTA programming
but i could never get the phone to roam on Sprint
11-04-2011, 11:08 AM
Salfasano, you need to jailbreak the phone before you mess with
the filesystem. It's protected, without it. Ithink this thread
assumes your phone is jailbroken already.
11-04-2011, 04:07 PM
it doesnt assume that,it states that at the very start,but you
are exactly right the fiesys is locked by default sowe must
jailbreak to gain access to the root of the phone
11-05-2011, 05:18 PM
Is there any advantages on doing this if i already have cricket
on my i phone 4, with redsnow jailbreak? sorrynew to the i phone
game
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 13/26
calisoldier83
calisoldier83
rich hathaway
TUAN1163
salfasano
jamrosz
calisoldier83
salfasano
calisoldier83
calisoldier83
11-05-2011, 05:55 PM
Is there any advantages on doing this if i already have cricket
on my i phone 4, with redsnow jailbreak? sorrynew to the i phone
game
General question: so if you change the carrier settings on a
jailbroken phone, then you install an updatewithout jailbreak will
the phone revert back to original settings?
11-05-2011, 05:56 PM
it doesnt assume that,it states that at the very start,but you
are exactly right the fiesys is locked by default sowe must
jailbreak to gain access to the root of the phone
General question: so if you change the carrier settings on a
jailbroken phone, then you install an updatewithout jailbreak will
the phone revert back to original settings?
PS please provide an editing function on your forum!
11-05-2011, 08:40 PM
to answer your question,yes they will revert,however ut wont
matter because your phone ignored them tobegin with.for your other
question there is a edit button just below your post,not sure what
your trying to edit,but if youdont see it let me know.
@tuan1163- to answer your question,if your phone is already on
cricket then that means you already have acricket .prl in your
phone,so it would be pointless unless you have a specific .prl you
are wanting on it.
11-05-2011, 09:20 PM
Thanks for the reply rich....let me know when you're ready to
sell your flash
11-06-2011, 08:32 PM
Salfasano, you need to jailbreak the phone before you mess with
the filesystem. It's protected, without it. Ithink this thread
assumes your phone is jailbroken already.
It's jailbroken
11-06-2011, 08:51 PM
Awsome work, keep it up.
11-08-2011, 01:55 AM
It's jailbroken
How'd you jailbreak it? Didn't it come with iOS 5?
11-09-2011, 08:23 PM
How'd you jailbreak it? Didn't it come with iOS 5? you can do a
tethered jailbreak with ios5
11-10-2011, 01:57 PM
So with a jailbreak we still cannot change the filesystem even
with apple carrier files? I thought the jailbreakallowed for us to
change those files, no restriction!
11-10-2011, 08:27 PM
I jailbroke the verizon iphone injected the prl and the rest of
the files from Sprint carrier bundle files into the
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 14/26
rich hathaway
chizzy500
stickies
rich hathaway
romeropc100
leonardo_djm
mU$!c inc.
whitey10tc
tomudachi
vzw folder. Everything was pointing to sprint; however, sprint
strictly uses WiFi to activate the iPhone and forsome reason the
activation wasn't hitting Sprint servers. There was a sequence like
##827.... to forceactivation, but that didn't do anything except
make a phone call. It was supposed to trigger the wifi
activation.This turned out to be more complicated than the cricket
activation. I'm sure if someone had a Sprint activatediPhone that
they could extract the filesystem and that would help in some sort
of way.
11-10-2011, 09:32 PM
what u guys are missing is a commcenter patch,even though they
are both signed bundles you still cant altereither one without a
proper commcenter break or it will break the sig and fail.i have
the sprint filesystem,youonly need to be jailbroken to get it.
11-11-2011, 01:53 AM
hey RICH can i at get a commcenter patch for my cdma iphone so i
can get txt and talk at least cos mynetwork does not offer ota pls
help!!
11-25-2011, 08:20 PM
Where is this tutorial everyone is commenting on for flashing
iphone 4 to cricket???? thanks people!
11-25-2011, 08:35 PM
Where is this tutorial everyone is commenting on for flashing
iphone 4 to cricket???? thanks people!
you gotta push the thanks buttons to reveal the hidden
content
12-15-2011, 10:06 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
Im doing this on a SemiTethered JB v-I4 5.0.1 and seems like it
doesnt take the prl (i used the latestmetropcs 3024)Although this
method worked for the 4.2.10 JB and the prl was kept when I
upgraded to stock 5.0.Could the ios version be the problem with it
won't take the prl??
01-07-2012, 05:11 PM
thank you i was waiting for this
01-07-2012, 06:30 PM
is this for an iPhone 4 flashed to CricKet??
01-07-2012, 06:59 PM
is this for an iPhone 4 flashed to CricKet??It is, and can be
used to write any prl to the iphone 4. In generalwriting PRL's to
the phone is the same regardless of the carrier.
01-08-2012, 04:04 AM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 15/26
rich hathaway
tomudachi
rich hathaway
tomudachi
cellfonepimp
tomudachi
rich hathaway
tomudachi
rich hathaway
tomudachi
I am so lost i dont see how to ad the prl to the iphone 4 cdma
5.0.1 email me [email protected] icant find any thing
online
01-08-2012, 11:17 AM
5.0.1 is a little different,u need to just use the ota
programming it is the easiest way.ive been meaning tomake a ipsw
with a cricket prl and post it but with 5.1 on the cusp of being
released it would be a wastebecause no-one ever seems to ever
understand to save blobs for each os that is released for there
phone sothey wouldnt be able to use it anyway.
01-09-2012, 04:22 AM
So how do I do the ota programming on the phone I am new at this
I am a tech I work on iPhones andcomputers. Over the air
programming if u don't won't to post it email me
[email protected]
01-09-2012, 10:00 AM
ota= add yer meid to your cricket acct then dial *228xx on yer
phone here we use *22804 your last 2 digitscould be anything, its
market specific. if you dont know start at 00 then try 01 ect.
until u here welcome tocricket when you dial. this has been covered
in the iphone forum in about a dozen places already peeps.thereare
a couple tricks to ota'ing so read thru the forum to get up to
speed on the latest i device stuff's.
01-09-2012, 02:56 PM
I have tryed that they ask me for the model of the phone and
they said sorry we can not help you thes waswhen I was changing
phone to the iPhone sould I lie and say a diffrint phone
01-10-2012, 12:04 AM
Ive flashed a dozen or so all 4.2.8 or below, anything past
4.2.10 the new prl wont stick. I am in Cleveland,Oh which is a
Revol market that only has *228. Is there no other way to get the
prl injected? Rich can youmake me a custom ipsw using a Revol prl?
Also I wanted to mention that somehow web has worked in everysingle
iphone Ive flashed, how do I figure out what it is Im doing
different from other flashers?
I can show video proof if need be.
Rich email me a price for the custom ipsw, my email is
thecelldoctor55 at (g) mail .com
01-10-2012, 04:01 AM
So I cant downgrade 5.0.1 to 4.2.8 I get stuck at activate
screen it is becouse of the 3.0.03 baseband that isfrom 5.0.1 and I
tryed useinf tinycfw but it go's no ware it dose not make one I let
it run for 10hr and nothinghelp me.
01-10-2012, 03:17 PM
thats because that baseband is not backwards compatible,so the
only way to come back down is to upgradeand preserve bb with one of
the nice new tools at our disposal or sn0wbreeze which was the
original bbpreserver.so ill say it again people,dont upgrade..ever!
if its not broke..dont fix it.
01-10-2012, 05:02 PM
i cant do preserve bb on iphone 4 cdma. only tinyCFW but it dose
not wont to work on windows
01-10-2012, 06:49 PM
dude,u can preserve,but if your on 5.0.1 already 3.0.03 then
your stuck there and you shoulda preservedbefore you went
there.
sn0wbreeze 2.7 would have worked for u.
01-10-2012, 07:09 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 16/26
stickies
tomudachi
rich hathaway
tomudachi
rich hathaway
TigerFade
rich hathaway
I tryed sn0wbreez samething same thing I am giveing up and put
on 5.0.1 thx
01-15-2012, 05:02 PM
even easier than snow breeze is redsnow 09.10b3 it will also
preserve it but why preserve the baseband onthe cdma iphone I don't
see where it makes a difference one way or the other. For GSM
phones yes preservethem always unless you understand there is an
unlock for the newer baseband but for your cdma iphone
noworries.
01-16-2012, 04:52 AM
I need preserve bb becouse it gives me a activation screen CDMA
iPhone dose not have that it is becouse ofthe new baseband one the
4.2.8 it dose not see 3.0.03 baseband so it apnea the activate. I
tryed reds ow andsnowbreez and fix recovery. Onl thing left is
TINYCFW but I need a make windows one is not working got meI even
tryed AT&T 4.3.3 it dose nothing I let it run for 16hr on 4.3.3
and 4.2.8 so I need some One that has amac to make me One and
upload it some ware like mega upload and post the link or email it
to [email protected]
01-16-2012, 09:33 AM
bb with the newer firms are not backwards compatable,so if you
have already updated,your stuck. even if uhave blobs.
01-17-2012, 03:02 AM
No I can do it if some one make me a firmware with tinyCFW from
the maker of tinyumbrela and use the4.2.8 to make and firmware from
it I can use it. It needs to be done on a Mac. I don't have one I
am trying toget hackintash just to make it HELP
01-17-2012, 11:31 AM
well if u think this will help you,here is a link for tcfw for
windows.but i dont think u fully understand what thistool does and
more importantly what it does not do,[since your bb is already
updated].you can accomplishthe same thing your trying to do with
redsn0w and will run much better and require not near as much of
yourpc's resources to get it done. but good luck anyway.
[Only registered and activated users can see links]
also this is really off topic for this thread,and is kinda a
hijack of this thread,so if you need to discuss thisfurther,please
start your own thread for your subject and i will merge these posts
into it. thanks.
01-21-2012, 04:13 PM
Agree with Rich, Apple BB are not downgradable. if you read the
from somewhere, they are wrong. also onlyfirmwares are downgradable
if you save a shsh blog on the Cydia.
but Rich what happens if sinfuliphonerepo is not available? i
been tried at less 10 times and it times out andwhen you open the
source the repo is there but no packages. is there another source
to download ifilecracked??
01-21-2012, 09:12 PM
well here are the repos with cracked apps,as for the sinful
repo,there are several address's for it,the newestone is
sinfuliphone.comhowever the original still works,when you load it
and it is blank for packages,you just gotta wait for it toupdate,to
help it along tap changes then refresh and let it completly
finish,also you can log out and back intocydia or simply pwr dwn
iphone and then pwr back on and refresh cydia after it loads.the
server is gettingpounded and these packages are just taking a while
to complete and show but they will load and show,i havehad them
take a couple of hours to fully load. good luck.
[Only registered and activated users can see links]
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 17/26
tomudachi
rich hathaway
gortega2
tomudachi
rich hathaway
tomudachi
cellfonepimp
rich hathaway
cellfonepimp
Epelle6: [Only registered and activated users can see links]
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 18/26
larisol
larisol
ndn001
tomudachi
torres94063
rich hathaway
4.2.10 and below) for 5.0 and above settings-general-about- then
tap carrier until your prl is displayed
They were regarding the sale of your solution but then I found a
post that said pm's or posts regarding thesolution will go
unanswered.
Im not at work now but I have more than a few viphones already
in 5.0.1, used cc patch on one and injectednew prl using diskaid
method, new prl shows under carrier in settings, when I dial 611
Revol picks up butwhen I dial *228 it gets the Vzw roaming
operator??? I even changed the sid using iFile and still roaming.
Isthere something Im missing? ( I replaced the carrier.prl with my
new one)
I read that there is a command that is to be used after cc
patch, I didnt do that after confirming the new prlhas been
injected.
01-31-2012, 02:22 PM
Interesting.. thx
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
01-31-2012, 02:25 PM
Thanks your work is greatly appreciated..
02-05-2012, 02:31 AM
I followed the steps on the First page still my call always gets
connceted to verizon. I am running ios 5.0.1,can some one please
help me ?
02-12-2012, 01:44 AM
So any updates on the full flash for viphone on cricket
02-19-2012, 07:06 AM
Hello Everyone,
I have changed my prls on androids but never on iphone. I have a
Sprint iPhone 4s, it is jailbroken withabsinthe.I dont want to
change carriers, i just want to load PRL 11115 with 3g roaming on
Verizon to my 4s. Is this possible using DiskAid?What file and on
which folder do i need to replace?I see that i have the Zeppeli
folder and the Sprint_OTA_US.bundle and Sprint_US.bundle. all of
them have afile named carrier.prl and carrier.pri
Thanks
02-19-2012, 10:54 AM
you need to load your prl into a custom ipsw then load the ipsw
to your phone,or at least until an easier wayis figred out, i dont
know of another way,doesnt mean there is not one,i just havnt had
much time to spendwith 4s. good news though,the decryption keys are
already there for 4s,(in plain sight,unhidden) which isreally not
like apple,but makes decryption alot easier to not have to search
for keys.in the comming weeks i will make and post a custom cricket
ipsw for sprint and verizon 4s iphones. sprint hasthe ability to
send that prl to your phone,you might try to get someone in there
tech dept and ask if they willdo that for you,i doubt if they will
but they have the ability.
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 19/26
cellfonepimp
rich hathaway
cellfonepimp
cellfonepimp
criajii
wpruett
rich hathaway
Wrecked Johnson
builtyodas
02-26-2012, 02:39 AM
you need to load your prl into a custom ipsw then load the ipsw
to your phone,or at least until an easier wayis figred out, i dont
know of another way,doesnt mean there is not one,i just havnt had
much time to spendwith 4s. good news though,the decryption keys are
already there for 4s,(in plain sight,unhidden) which isreally not
like apple,but makes decryption alot easier to not have to search
for keys.in the comming weeks i will make and post a custom cricket
ipsw for sprint and verizon 4s iphones. sprint hasthe ability to
send that prl to your phone,you might try to get someone in there
tech dept and ask if they willdo that for you,i doubt if they will
but they have the ability.
Hey Rich, I looked everywhere, searched for hours and days,
could not find a tut for loading new prl in ipswthan restoring to
iphone. Or a single post that flashes 5.0.1 without ota, which in
my area is not an option butother flashers are flashing them. Dude
Im begging you(no shame in my game) for some guidance.
02-26-2012, 10:39 AM
do you not have ota available or your phone just wont ota?you
might check that ota is enabled on your phone.if your phone is
using the sprint bundle ota is not gonna work without a prl and sid
loaded.i have been to bizzy this last week to make one,i will get
it done,but i must run my stores,ya know.ill try toput out one for
cricket and one for metro.but i got to have the time to do it.
02-27-2012, 12:13 AM
Ota is available, I have not been successful in any of the
4.2.8-5.0.1 phones in getting the new prl to stick. Ihave a mac and
a w7 machine and know its possible to make a custom ipsw with my
prl, have searched overand over in my spare time and cant find a
tut. Like you I own my own businesses, so my spare time is atnight
after work in the late night hours. Just so I dont leave anything
out we are still changing the carrier.prlin the Zepp folder right?
Same as your initial iFile method tut?
02-27-2012, 12:15 AM
Forgot to mention im in a Revol market.
03-03-2012, 10:31 PM
thanks :DDD i will try it in my country ^_^
03-07-2012, 04:46 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!i clicked thank you and still can't see the
content:(
03-08-2012, 04:58 PM
i sent it to your pm bro
03-09-2012, 02:05 PM
*22807 on verizon iphone
03-12-2012, 10:30 PM
I have tried your method to no avail Rich, The prl will not
stick to the phone. Running ios 5.0.1 cdma verizoniphone. I had it
flashed to cricket once on 4.2.10 then my kid updated to 5.0.1
every since it wont flash. I
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 20/26
rich hathaway
tomudachi
newbaby4ever
builtyodas
rokit8
smartmazila
added your comm center patch and it wont flash. I can jail break
no problem... Actually trued on 2 differentphones with no luck both
on 5.0.1
03-13-2012, 12:07 AM
thats because this was made for 4xx not 5xx
03-13-2012, 02:51 AM
What u need to do to get cricket on the iPhone 4 or 4S
1. Get your Meid to cricket Meid [Only registered and activated
users can see links]
2. To get your Meid go to settings/general/aboutLook for MEID
and take that A100001****** andput it in to the site I put in part
one.
3. Call cricket on your home phone and when you get them on the
phone tell them you won't to upgradeyour phone and if the ask what
phone you have say youdont no but it is. Verizion LG phone
4. The will tell you there is a $15 fee say ok
5. They will ask for your MEID go to the site the you putyour
phones A100001 number in and give themthe "Dec MEID" Number.
6. After that you are done call*22804 then call *228
7. Reboot your iPhone have have talk and text
03-13-2012, 06:12 PM
Hi,
I got everything set up. But i failed at step 5. The rep said my
area does not support flashed phone. I live inDes moines IOWA,
50314. what is the workaround for this? Use a difference zip code?
Have someone add theESN for me?
Please help. Thanks.
03-14-2012, 10:56 PM
This also works for 5.0.1 I erased each individual file from the
carrier bundles file and then added in newfrom another iphone then
added the 1050 prl and renamed it to 310VZW, then I followed the
directions in firstpost. After first power off and on said no
sevice, after second power of and on said searching for along
timethen I got bars and reception... Dial *228 and wala welcome to
cricket... The add meid to cricket and dotranfer then dial *228 did
not work for me I had to manually ad prl into carrier bundls and do
the prl push flagmethod.. So if you have updated to 5.0.1 and lost
your flash just open carrier bundles and delete the files inthere
and copy or paste in new files from a different carrier bundle i
use one of a iphone 4 that wasnt touchedand then copied cicket prl
to 310VZW.prl after i renamed it to 310VZW.prl and yes to warning..
All is well.Also my other phone has the 310VZW symbolic link erased
the little box with the blue arrow in it. Is there away to get this
symbo;ic link back? Can not flash phone with out that link
becacuase carrier bundles and the310VZW communicate t each other
..
03-15-2012, 12:46 AM
How To Make a Symlink with iFileSelect Edit from iFile and
checkmark the file or folder you wish to link. Tap the clipboad,
and click Copy/Link.Then go to where you wish to put the link and
tap Edit>Create Link.
03-15-2012, 06:43 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 21/26
benmyers2012
smartmazila
rich hathaway
Radicals
chewdog316
rich hathaway
smartmazila
hi bro,carrier says to me to enter MCC, MNC, IMSI (min) to my
phone. MCC 282MNC 05IMSI (MSIN) 10 digit number
how can I enter this info to my iphone? i added prl file and it
recognises carriers net. I jus need to give tocarrier ESN and write
IMSI to my iphone.
any ideas?
03-29-2012, 05:05 AM
I followed these instructions to a "T" and after the last reboot
and am still showing the same old prl. I amtrying to flash my
Verizon iPhone 4. It is jailbroken and running 5.0.1. Please help.
:)
03-29-2012, 11:04 PM
maybe custom carrier bundle is solution? how create codesigned
carrier bundle? is it possible with xcode?
03-29-2012, 11:16 PM
if you read the guide,you will see it was made for 4x not 5x,it
is different on the 5x platform.
03-30-2012, 09:16 PM
Hi Rich, How different is it on the 5x platform? Just tried your
method and failed, It's wasn't that complicatedto follow, I guess
the instructions were not meant for iOS 5x. thanks
03-31-2012, 06:27 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
I cant connect to sinfuliphonerepo.comSuggestions?
03-31-2012, 09:08 PM
update your cydia,or if it is then use sinfuliphone.com,if it is
still not loading use one of these,
i personally prefer xsellize,but here they are,
cydia.myrepospace.com/iPhoneTechie/
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 22/26
Azzadeen
littlebo1
jp85041
Azzadeen
rokit8
almujahid
freshkid87
ACCOLOCDefault:[pESN1]
I paid $100 & programmed NAM with DFS. text + talk is
working. tomorrow will try EVDO ;)
04-07-2012, 04:20 PM
what about the 4s from sprint. MSL SPC code isn't 0'z for OTA
update? any idea how to do it?
04-09-2012, 04:00 AM
I found why sprint phones wont OTA even with 0 spc . Their akey
is fixed , cant be changed. One of the firstthings OTA do during
program - generates akey and write it to phone ( at least in our
network ) Sprint iphonewont accept new akey as this NV is constant
and programming fail. You have to try fix OTA procedures
onoperators equipment and software.
04-15-2012, 09:37 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
Thank you RICH for the files,
04-18-2012, 02:25 PM
I found why sprint phones wont OTA even with 0 spc . Their akey
is fixed , cant be changed. One of the firstthings OTA do during
program - generates akey and write it to phone ( at least in our
network ) Sprint iphonewont accept new akey as this NV is constant
and programming fail. You have to try fix OTA procedures
onoperators equipment and software.
the akey is the 26 digit key? it is fixed even in verizon, it
depends on the IMEI which is also fixed. I checked itbefore and
after OTA is done. Sprint 4 is ok with OTA after setting SPC to
zeros. 4S SPC won't be set tozeros!
04-18-2012, 09:07 PM
i can confirm 4s spc to 0s. When i do ##akey, i get prompt for
spc. If i type in 123456, i get bad spc. If i type0s, i get enter
26 digit akey.
04-28-2012, 10:40 AM
Thank you soooooooooooooooooo much
05-06-2012, 12:36 PM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 23/26
tinobarko
tinobarko
rich hathaway
tinobarko
tinobarko
rich hathaway
thanks man you helped me
05-07-2012, 10:43 PM
hey rich i follow all these steps you wrote............-
download the diskaid file to pc.
2, rename your prl to 310VZW.prl and place it in a folder on
your pc
3, open diskaid, plug your phone,when it shows up navigate on
diskaid to
/system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle it doesnt matter which,they both writeback to
each other.
there you will see the 310VZW.prl file.
4, now open the file you renamed with your prl and simply drag
and drop the one you rename onto the onethats in the diskaid window
and click overwrite to the warning thatpops up,it will overwrite
it,then close all that out,the rest is done on the device.
5,open cydia via wi-fi and tap manage/sources/edit/add
then type this new source in sinfuliphonerepo.com then click add
source.
then click ok to the warning it throws.
after it updates click return to cydia tap the new source you
just added and scroll down
to iFile Cracked then tap install,then confirm,then go to it on
your springboard open it &
navagate to /system/library/carrier bundles/iphone/310vzw or
zeppelin_us.bundle
tap which ever one you choose to open it,tap carrier plist,then
tap property list viewer, then scroll down tojust below the
signatures to prlpushflag and switch the boolean to show on. tap
done.
6, power off phone,then back on.
7, then go back to the boolean we just changed,and change it to
off again,
8, then power iphone 4 back off,and then on again.
done. check by dialing *#5005*4357# then send
but after on off the iphone i got no SERVICE any help be
appreciated i double check everything
05-07-2012, 11:02 PM
still have no service dont know why i follow ur
steps..............
05-08-2012, 09:26 AM
what os does yur phone have?
05-08-2012, 02:08 PM
i did fix rich by the air but theses above stepsdidnot work for
me
05-08-2012, 02:13 PM
i need now the ip settings for metropcs the hex value
05-08-2012, 05:11 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 24/26
tinobarko
tinobarko
tinobarko
captainkirks
lb8166
drummerade
phone4cell
Wrecked Johnson
rich hathaway
rychada
code_red2424
still have no service dont know why i follow ur
steps..............
well if you look at the date of this guide it was a long time
ago,and was made for 4.2.6/4.2.8/4.2.10
not 5.0/5.0.1/5.1/5.1.1
i would bet you have a newer os,if you dont then you are not
following directions because that works 100%
05-08-2012, 05:20 PM
rich that part fix...........but i found the jalbreaking with
redsn0w 0.9.10b6 find it unstable the phone keepshutting on and off
have have to redo the teathearing again to coonect with dfs
program.
05-08-2012, 05:22 PM
this is 2nd phone with same issue this firmware 5.1
05-09-2012, 10:28 PM
no bother anymore with prl , can be written with
cdmatools........
05-09-2012, 11:47 PM
I also have trouble with 5.1
05-10-2012, 12:13 AM
Why can't I see the content?
05-10-2012, 04:56 AM
Why can't I see the content?
you must hit thanks button
05-11-2012, 12:00 PM
thanks rich mike from san fran
05-11-2012, 12:20 PM
you must hit thanks button
Now hit my thanks button just the way i like it
05-11-2012, 10:38 PM
thanks rich mike from san fran
sup mikey-mike......one post... you just find yer way here? glad
you did bra == hang out for a while
06-17-2012, 01:03 PM
Thanks Rich, though I av not tried this but I appreciate the
fact that you take your time to explain to vituallyall question
throw at you. You the man.
07-09-2012, 02:14 PM
Thanks. Finally got it to work. All I had to do was rename my
prl file from 310VZW.PRL to carrier.prl becauseI didn't have the
310VZW prl in the folder and instead had the carrier.prl.
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 25/26
rich hathaway
Juliusman
aljrafy
pisaman
makaholic
ipung
stephenwoodsmus
mucho
rich hathaway
aboulshamiz
07-09-2012, 02:36 PM
Thanks. Finally got it to work. All I had to do was rename my
prl file from 310VZW.PRL to carrier.prl becauseI didn't have the
310VZW prl in the folder and instead had the carrier.prl.
yes,i wrote this guide before there was any such thing as
carrier.prl but things change quickly in the techworld
07-09-2012, 05:59 PM
Thank you man you did make my day.
07-23-2012, 05:05 PM
thank,s good work.
08-24-2012, 01:40 PM
thanks for the post
08-29-2012, 01:40 AM
thasdfasfdsasadfasfsadfs
10-31-2012, 01:15 AM
this way is simple and quick,it will have the prl of your choice
on your phone in a few minutes.
i have included all files you will need (except your prl)
you need to be jailbroken for this to work.*** hidden content
***
oh and i highly recommend while your in the sin-i-repo to
install mi-wi cracked for your free hotspot,andTethrMe Cracked for
your apn's (cellular data network tab) for free also.
thats it enjoy!
thanks for the post
11-03-2012, 09:12 AM
thank you! great
11-05-2012, 04:54 PM
yes,i wrote this guide before there was any such thing as
carrier.prl but things change quickly in the techworld
worked like a charm. THANKS ...however, my carrier still says
Sprint 12.0 but the PRL has changed. I wasunable to verify by
calling the number - probably due to two reasons 1. phone is not
activated 2. trying thisfrom a non-CDMA country / Europe
Any idea how to activate the phone from overseas?
Thanks
11-08-2012, 12:42 PM
only by ota or saved activation ticket from redsn0w
02-18-2013, 05:28 PM
-
8/7/13 Guide : How to write a new .prl to v-iphone 4 without
open ssh-(the simple way) [Archive] - CDMA Gurus
cdmagurus.com/archive/index.php/t-4718.html 26/26
saleh lashrf
anayamani
OH thanks 4 u r guide
03-18-2013, 09:15 AM
thank you very much
04-02-2013, 11:39 AM
6, power off phone,then back on.
put my ios 6.1.3 iphone 4 cdma
thank you
Powered by vBulletin Version 4.2.0 Copyright 2013 vBulletin
Solutions, Inc. All rights reserved. SEO by vBSEO 2011,
Crawlability, Inc.