FACULTY OF ELECTRICAL ENGINEERING
MULTIMEDIA SYSTEMS AND APPLICATIONS (ECE551)GROUP PROJECT 1
REPORT(Poster)
TITLE: SAFETY AWARENESS CAMPAIGN
NAMENO. MATRIX
MOHAMMAD ARIEF BIN MUHD BAKRI2013838072
AMMIRUL ASHRAF BIN ABD MALIK2013810152
AHMAD AIMAN BIN HASMARUDDIN2013673912
LECTURER NAMEMDM MAIZURA MOHD SANI
TABLE OF CONTENT
No. TopicPages
1.Rubics Project 21
2.Image2 - 4
3.Text
4.Background
5.Reference
RubricsProject 2
MULTIMEDIA SYSTEMS AND PRESENTATIONSECE 551Evaluation:Design
Poster
CATEGORIESTOTAL MARKSMARKS OBTAINED
Banner/Poster Title Text (2m) Background (2m) Image (2m)
Creative and Attractive (1m)7
Project report Content (2 m) Neat (1 m)3
TOTAL/10
Image This image was downloaded at Google
image.http://howto.c1.b.cdn.hardwareandtools.net/wpcontent/uploads/2015/01/h312166_1367862889.jpg
After remove background
This image was chosen because it represented the faulty wire for
our poster project tittle 1 Safety Awareness Campaign. We cut-out
the background of the image to get outline of the image only by
using the magic wand tool/magnetic lasso tool and click at the
selected background and delete.
For the fire effect we download the image at Google
image.http://www.iwebdesigner.it/wp-content/uploads/2012/06/fire-18.jpg
This image is to combine with the faulty wires image for makes
it on fires.To combine it we set the blending mode for the layer to
screen blend. So when combine it when other image it will blend
with the image.
Then to make the fire more realistic and control the structure
of the fire we used the Transform Warp. We adjust the point of the
image.
After that we blend the two of the images. Just drag the fire
image to the faulty wires and adjust the textures of the fire by
Edit Transform Warp.
Then to makes the faulty wires more burnt we used Burn Tool and
apply at the image.
This is the final images of the combination of two image faulty
wires and fires.
Background Figure 1 Figure 2 Figure 3 The first step background
was taken from website as figure 1 and figure 2 above. Then, it
combines together as in figure 3.
Figure 4 Second step we cut-out the background of the image as
figure 4 to get outline of the image only by using the magic wand
tool/magnetic lasso tool and click at the selected background and
delete.
Figure 5 Then we select that only part of caution section by
magnetic lasso tool as in Figure 5 shows.
Figure 6
Figure 7 The Final step was finished as in figure 7. We cut
image in figure 6 and paste it into final image as in figure 7
above.
Referenceshttp://my-smashing.smashingapps.netdna-cdn.com/wp-content/uploads/2012/07/iphone4wallpapers9.jpghttp://th09.deviantart.net/fs70/PRE/f/2012/224/f/8/caution_wallpaper_by_claine89-d5atyij.pnghttp://www.svetandroida.cz/media/2012/03/paper_Metallic-Background.jpghttp://www.wpclipart.com/page_frames/full_page_signs/Bold_signs/warning_sign_bold.png