GROUP - haeco.com€¦ · airframe, cabin, engine and component services. Airframe Services Offers airframe maintenance, cabin reconfiguration, structural modification, freighter

Last update 13 June 2018

HAECO GROUP

Contents

2

1 Corporate Overview

Swire Pacific

HAECO Group Milestones

About HAECO Group

HAECO Group Portfolio

Geographical Presence and Experience

Manpower Distribution

Group Capabilities

Customer Profile

Key OEM Relationships

Sustainable Development

2

Group Services

Airframe Services

Freighter Conversion

Line Services

Cabin Solutions

Private Jet Solutions

Component Services

Engine Services

Inventory Technical Management

Fleet Technical Management

Parts Manufacturing

Technical Training

3

Corporate

Overview

3

4

Corporate Overview

Market

Capitalisation*

USD14.5bn

Revenue

USD10.3bn

Ratings

A- (S&P);

A3 (Moody’s)

Property Beverages Aviation Marine

Services

Trading &

Industrial

* As of 10 April 2018 For the year ended 31 December 2017 Swire Pacific is publicly listed on the Hong Kong Stock Exchange

Content Page

5

Corporate Overview

Aviation

Catering Cargo

Handling

Engineering &

Maintenance

Ground

Services Airlines

Market

Capitalisation*

USD0.94bn

Shareholding

Swire Pacific 75%

Public 25%

Revenue

USD1.9bn

* As of 10 April 2018 For the year ended 31 December 2017 Hong Kong Aircraft Engineering Co. and Cathay Pacific are

both publicly listed on the Hong Kong Stock Exchange

Content Page

6


1950’s 1960’s 1970’s 1980’s

Established in

November 1950 by the

merger of Swire’s

Pacific Air

Maintenance & Supply

Company (PAMAS)

and Jardine Air

Maintenance Company

(JAMCo)

Floated on the

Hong Kong Stock

Exchange in 1965

Began construction of

Asia’s largest hangar in

1968

Acquired capabilities

on L1011 aircraft and

RB211 engines

Amount of business

from international

airlines increased

First aircraft

conversion – upgraded

a L1011-1 series

to L1011-150

Content Page

7


1990’s 2000’s 2010’s

Formed HAECO

Xiamen in 1993

Formed HAESL with

Rolls-Royce in 1997

Formed STAECO in

Jinan in 1999

Relocated to new

Hong Kong International

Airport in 1998

HAECO opened second

and third hangars in 2006

and 2009

HAECO Xiamen opened

its fifth hangar in 2007

Formed HAECO Line

Services (Singapore) and

HAECO Landing Gear

Services in 2007

Formed TEXL and

HAECO Composite

Services in 2008

SMECO opened in 2010,

followed by HAECO

Shanghai in 2011

HAECO Xiamen opened

sixth hangar in 2011

HAESL opened Phase V

component repair facility

in 2011

Formed HAECO ITM Ltd.

in 2012

Established HAECO

Component Overhaul

(Xiamen) Ltd. in 2014

Acquired TIMCO Aviation

Services, Inc. in 2014

HAESL opened Phase VI

engine overhaul facility in

2017

HAECO Americas opened

its fifth hangar in 2018

Content Page

About

HAECO Group

8

HAECO Group Portfolio

9 Content Page

10

Manpower Distribution

16,641 Employees

Mainland China 43% (7,141)

Hong Kong 43% (7,146)

Singapore (23)

Americas 14% (2,331)

Content Page

For the year ended 31 December 2017

Group Capabilities

11 Content Page

12 Content Page

Group Capabilities

13 Content Page

Group Capabilities

Customer Profile

14 Content Page

Key OEM Relationships

15 Content Page

Sustainable Development

16 Content Page

HAECO believes sustainable

development of its business

rests with integration of the

needs for social development

and environmental protection

HAECO is committed to

managing and promoting five

major areas of sustainable

development in the industry

in which it operates

Community

Engagement

Stakeholder

Engagement

Environmental

Protection

Health &

Safety

Purchasing and

Supply Chain

Sustainable

Development

Group Services

17

HAECO Group Services

18

HAECO Group

One of the world’s leading aircraft engineering and

maintenance groups, offering a comprehensive range of

airframe, cabin, engine and component services.

Airframe

Services Offers airframe maintenance,

cabin reconfiguration, structural

modification, freighter conversion

fulfillment, as well as line services

covering transit checks and

certification, defect clearance,

cabin management, ramp services

and 24/7 AOG support across

Asia and the United States.

Cabin

Solutions Provides turnkey cabin integration

solutions for commercial aircraft

and private jets, covering design

engineering, certification and

vendor management. The Group

is an authorised aircraft seat and

cabin interior products OEM.

Component

Services Provides Inventory Technical

Management, component repair

and overhaul services for

hydraulic, mechanical, avionics

and pneumatic systems across

the Airbus and Boeing commercial

aircraft fleets, and with wheels and

brakes, tyres, aerostructures,

landing gear and APUs through

the Group’s subsidiaries and joint

ventures.

Engine

Services Operates world-class repair,

overhaul and testing facilities for

Rolls-Royce RB-211 and Trent

engines in Hong Kong, and a GE

Aviation-authorised GE-90 facility

in Xiamen, Mainland China.

Content Page

19


Airframe Services

HAECO provides airframe maintenance, cabin

reconfiguration, structural modification and non-

destructive testing through its 26 hangars in six

locations in Hong Kong, Mainland China, and the United

States, with technical capabilities covering all common

widebody, narrowbody, and regional commercial aircraft

types

Fully supported by shop facilities such as Composite

Shop, Sheet Metal Shop, Machine Shop, Paint Shop,

Seat Shop, Fabric & Carpet Shop, Retrim Bay, Cable &

Pipe Shop and Battery Shop

Warehouse and logistics services to meet production

requirements on a real-time basis

Content Page

20


Airframe Services

Content Page

Locations:

Asia - Hong Kong, Xiamen, Jinan, Chengdu;

Americas - Greensboro, NC; Lake City, FL

Number of hangars: 26

Approvals: HKCAD, PRC CAAC, USA FAA, European

Union EASA, Canada TCCA, Bermuda DCA and 23

other authorities

21


Freighter Conversion

Content Page

Collaborating with Original Equipment Manufacturers,

Supplemental Type Certificate holders and engineering

companies, the Group also provides freighter

conversion fulfillment services

Service covers major commercial aircraft types

including Boeing 747, 737 and 757 using various STCs

Locations: Xiamen, Jinan, Greensboro

HAECO provides line services for over 140 airlines at its

16 line services stations in Hong Kong, Mainland China,

Singapore, and Greensboro, NC, USA

Comprehensive line services cover transit checks and

certification, defect clearance, engine on-wing services,

cabin management, ramp services, and round-the-clock

AOG support

Maintenance checks up to full 'A' checks on most

commercial aircraft types with various combination of

engine types

ArIES (Aircraft Interior Enhancement Solutions)

provides 24/7 maintenance support services to manage

cabin quality and standards at the Hong Kong

International Airport

22


Content Page

Line Services

23


Content Page

Line Services

Locations:

Asia: Hong Kong, Xiamen, Beijing, Chengdu,

Chongqing, Harbin, Jinan, Nanjing, Shanghai (Pudong),

Shanghai (Hongqiao), Tianjin, Wuhan, Zhengzhou,

Yinchuan and Singapore

Americas: Greensboro, NC, USA

24


Content Page

Cabin Solutions

Provision of turnkey cabin integration solutions for

commercial aircraft covering design engineering,

certification and vendor management. The Group is

also an authorised aircraft seat and cabin interior

products OEM

Accomplished FAA, EASA, JCAB and HKCAD STCs for

cabin interior modifications in both the private jet and

commercial airline segments

HAECO Americas holds FAA Organisation Designation

Authorisation (ODA) providing additional benefits to

customers through the design and development

process

25


Content Page

Cabin Solutions

Cabin Solutions facilities in High Point, NC and

Wallburg, NC offer a complete range of aircraft seats

and interior products

Products include cost-saving and environmentally-

friendly line of seats, galleys, and lavatories

Unique, purpose-built products such as crew rest

modules, class dividers and other closets and storage

units

Space-saving ceiling stowage compartments

Vector™ Economy seat – ergonomically optimised to fit

passengers comfortably while maintaining low cost, light

weight, comfort, and ease of maintenance. A full line of

standard and selectable features can be tailored to

accommodate both short haul and long haul operators.

Vector™ is available for line-fit for the Boeing 737 and

787, certified for the Airbus A320 and A350

Vector™ Premium seat – minimises the operator’s

acquisition, installation, and maintenance costs through

pre-certification, modular design, parts commonality, and

streamlined manufacturing. Deliverable in six months,

certified to FAA TSO-C127b

Arc™ headrest – featuring the industry’s first double hinge

system, the Arc™ headrest uses multiple points of

customisation which provide an enhanced passenger

experience and can be retrofitted onto existing third-party

platforms

26


Content Page

Cabin Solutions

Complete parts and components kitting and logistics

support

Single-source provider of carpet solutions including

inventory management, cut, surge, kitting, distribution

and installation

Certified test laboratory including flammability, static,

cycle and dynamic testing capabilities, with a fully

functional test sled on site

Cabin LifeCare™ interior products total care support;

fleet engineering support services; testing and

certification services, and avionics upgrades

27


Content Page

Cabin Solutions

28


Content Page

Private Jet Solutions

Operates the first and only Airbus-approved and Boeing-licensed

cabin completion centre in the Asia Pacific region, encompassing

industrial design, design engineering and certification, cabin

completion supported by specialised cabin support shops, after-

sales support, as well as airframe maintenance

Performed green Airbus ACJ319 cabin completions and Boeing

BBJ retrofits

Holder of Part 21J Design Organisation Approval (DOA) and Part

21G Product Organisation Approval (POA) from HKCAD, and an

approved Designated Modification Design Organisation

Representative (DMDOR) of CAAC. STCs awarded by HKCAD is

validated by EASA, and FAA certification is supported by HAECO

Americas as an FAA-certified ODA

Facilities include a dedicated private jet completion bay and

specialised cabinetry, veneer, upholstery and other cabin

cosmetics shops

Operates purpose-built and AS9110:2016 accredited component

workshops in Hong Kong and Mainland China that offer repair and

overhaul of LRUs

Capabilities to service mechanical (including hydraulic and

pneumatics) and avionics components for major Boeing and Airbus

commercial aircraft types. Airbus A350 component repair capabilities

are in place and will be enhanced

Other dedicated workshops for handling:

ATE6 avionics testing and repair

Fire bottles with in-house halon recycling facility

Oxygen bottles with hydrostatic test facility

Slides, life rafts and other safety equipment

Cargo handling systems and lavatories

Galley inserts and inflight entertainment systems in

partnership with OEMs

Approvals: FAA, EASA, CAAC, HKCAD and other local aviation

authorities

29


Content Page

Component Services

30


Content Page

Component Services

HAECO Composite Services in Jinjiang, Mainland China,

specialises in aerostructure repair and overhaul services,

covering nacelles, radomes and flight controls, with

rotable exchange support

Capabilities include:

Radomes of all Airbus series

Airbus A330 Trent 700 T/R & N/C

Airbus A320 V2500 A5 / CFM56-5B T/R, F/C, N/C

& Flight Controls

Boeing 737NG CFM56-7 T/R, F/C, N/C & Flight

Controls

Boeing 777 Trent 800 / PW4000 T/R, F/C & N/C

Boeing 777 GE90-90/94/110/115 T/R, F/C

Boeing 767, 747 CF6-80C2 / PW4000 T/R

FAJ, paint booth, clean room, NDT and autoclaves

Additional control surfaces and related aircraft

component repairs provided by HAECO Americas

in the U.S.

Provides repair and overhaul services for landing gear,

with rotable exchange support

Capabilities include Boeing 737, 747, 757, 767, 777 and

Embraer E190/E195

Comprehensive in-house capabilities, including shot-

peening, Non-Destructive Testing (NDT) and machining

Boeing-approved landing gear shop

Approved Repair Station by USA FAA, European Union

EASA, PRC CAAC, Thai DCA and Indonesia DGCA

31


Content Page

Component Services

32


Content Page

Component Services

Joint Ventures with Original Equipment Manufacturers

(OEMs)

Wheels & Brakes repair & overhaul services

by Goodrich Asia-Pacific in Hong Kong

Aircraft Component repair & overhaul services

by Goodrich TAECO in Xiamen, Mainland China -

fuel pump, FMU, hydraulic actuator

Aircraft Component repair & overhaul services

by Honeywell TAECO in Xiamen, Mainland China

- APU, HMU, heat exchangers, air turbines

Total Aircraft Tyre services by Dunlop Taikoo in

Jinjiang, Mainland China

33


Content Page

Inventory Technical Management

Provision of Inventory Technical Management solutions

through HAECO ITM Ltd. – a Joint Venture between

HAECO (70%) and Cathay Pacific (30%)

Services ranging from flexible inventory pooling options,

Power-By-the-Hour support services, repair

management to ad-hoc loans, exchanges and world-

wide AOG support

‘Total Care’ component management solution with

guaranteed service levels and high quality component

maintenance at competitive cost

Extensive component engineering and airline operating

experiences with strong in-house repair capabilities

Strategic relationships with OEMs and world-class

supply chain partners

34


Content Page

Engine Services

The Group offers world-class repair, overhaul, and

testing services for Rolls-Royce RB211-524 and the

Trent family of engines through Hong Kong Aero Engine

Services Limited (“HAESL”) in Hong Kong. The facility

features 9 of 21 Rolls-Royce Component Repair Centres

of Excellence

Taikoo Engine Services (Xiamen) Co. Ltd. (“TEXL”) in

Xiamen, Mainland China, is an Authorized GE90™

Service Provider, GE90 Center of Excellence and the

sole holder of a GE90 Branded Service Agreement

(“GBSA”) in Asia

Locations: Hong Kong, Xiamen

35


Content Page

Fleet Technical Management

Tailor-made fleet technical and asset management

services

Services include:

Integrated Fleet Management

Continuous Airworthiness Management

Maintenance Support

Design & Certification

Operation Support

Technical Flight Data Management

Leasing Companies Support

A build-to-print manufacturer of airframe parts and

spares for OEMs and aircraft manufacturers, offering

machined parts, sheet metal parts and wire bundles

Holds a range of design and manufacturing capabilities

including process design, tool design, NC programming,

special processes such as plating, NDT and mechanical

testing; manufactures aircraft structure, cabin, and

modification parts, as well as wire bundles and

composite part assemblies

With Nadcap accreditation for NDT, heat treatment and

chemical processing, and capability to provide Boeing

and Airbus-approved special processes

Facilities are certified under HKAR-21 POA, Boeing

BQMS and BVQI (AS9100-2000)

36


Content Page

Parts Manufacturing

37


Content Page

Technical Training

Provides training and examination services to domestic

airline customers and MROs in Mainland China as well

as in Asia. The Group provided 4,431 training courses

and trained 73,536 students in 2017

Approved Training Organisation under Part-147 by

CAAC, CAAS, EASA and HKCAD

Collaborates with Airbus to deploy ‘Training by Airbus’

standards and to provide training on Airbus aircraft at

‘Airbus Competence Training’ facility

The first Maintenance, Repair and Overhaul (MRO)

Organisation and Aircraft Maintenance Training

Organisation (AMTO) in Mainland China equipped with

the Boeing 787 training suite

HAECO Group

38

For more information, please visit

www.haeco.com

GROUP - haeco.com€¦ · airframe, cabin, engine and component services. Airframe Services Offers airframe maintenance, cabin reconfiguration, structural modification, freighter

Documents