GRINCHMAS TREE COUNTDOWN Just Kisses · one Grinch panel (Do not cut out the ornaments yet) From the Binding Fabric, cut: four 2-1/2” x WOF strips From the Ribbon, cut: twenty-four

Difficulty Rating: Beginner

Just KissesDesigned by Sandi Irish for RKwww.robertkaufman.com

Featuring

GRINCHMAS TREE COUNTDOWN

For questions about this pattern, please email [email protected].

Finished quilt measures: 22” x 35”

page 2

Fabric and Supplies Needed

Color Fabric Name/SKU Yardage

ADE-17489-223 HOLIDAY

Color Fabric Name/SKU Yardage

Fabric amounts based on yardage that is 42” wide.

A 1 yard (one full panel)

1/3 yard

Copyright 2018, Robert KaufmanFor individual use only - Not for resale

You will also need:2 yards of 1/8” wide black ribbon

2 yards of double sided Fusible Web 1 yard of black felt

twenty-four buttons, approximately 3/8” in size

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

From Fabric A, cut:one Grinch panel(Do not cut out the ornaments yet)

From the Binding Fabric, cut:four 2-1/2” x WOF strips

From the Ribbon, cut:twenty-four 3” lengths of ribbon

From the Black Felt:cut the yardage in half, making two equal sized pieces. Exact dimensions aren’t important, so long as you can layer them together in Step 4.

Notes Before You Begin

Cutting Instructions

ADE-10792-3 RED

Binding*

page 3

Step 1: Following manufacturer’s directions, fuse the wrong side of the ornament portion and number portion of the panel to the fusible web.

Step 2: Cut out each ornament on the black line.

Assemble the Ornaments

Step 7: Layer the remaining portion of Fabric A (the wall hanging portion) with the batting and backing. Quilt as desired and trim to the edge of the Fabric A image (approximately 22” x 35”). Attach the binding.

Step 8: Sew the buttons to the tree, scattering them throughout the tree image and placing one in the Grinch’s hand. Hang each ornament on the tree, numbers facing out. Turn over each ornament as the days pass, placing that day’s ornament on the Grinch’s hand!

Assemble the Panel

This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2018. All rights reserved.

Step 3: Using one of the felt pieces, fuse the wrong side of each picture to black felt, leaving at least 1/2” between ornaments. In the same fashion, fuse the wrong side of the number portion of the ornament to the second piece of black felt.

Step 4: Cut out each ornament 1/8” from the edge of the fabric. You should now have forty-eight ornament shapes, each fused to one layer of felt.

Step 5: Pin each picture side to a number side, felt pieces together, and place a folded piece of ribbon in the top area of the ornament so that 1/2” of loop shows. The raw edges of the ribbon will be hidden between the layers of felt. Stitch around the ornament at the edge of the fabric, being sure the ribbon is secured.