Grid Control Installation 10g

8/2/2019 Grid Control Installation 10g

1/13

10g Grid Control Installation

ORACLE 10GORACLE 10G

GRID CONTROL INSTALLATIONGRID CONTROL INSTALLATION

NAME : SURESH.VPLATFORM : ORACLE ENTERPRISE LINUX 5.x 64bitVERSION : 10.2.0.3.0DATE : 29.07.2010

1 ORAFACT


2/13


Table of Contents

1. Oracle 10g Grid Control Installation.....................................................................................................31.1 Prerequisite .....................................................................................................................................31.2 Installing Grid Control....................................................................................................................51.3 Connecting Enterprise Manager....................................................................................................13

2 ORAFACT


3/13

10g Grid Control Installation1. Oracle 10g Grid Control Installation

1.1 Prerequisite

Server ConfigurationOperating System : Oracle Enterprise Linux 5.5 x86_64Software : 10g Release 3 (10.2.0.3)RAM : 8GBHard Disk : 1TBSwap : 10GBServer Name : of80.orafact.comIP Address : 192.168.1.80

Reference DocumentsBooks are downloaded from our intranet site http://connect.orafact.com

Grid Control Quick Installation Guide for Linux x86_64 (E10054-01)

Downloaded SoftwareSoftware downloaded from http://connect.orafact.com (B42207-01_1of2.zip B42207-01_2of2.zip)[root@of80 ~]# cd /stage/suresh/grid

Configuring hosts fileConfigure Hosts file with host name, domain name and system IP[root@of80 ~]# vi /etc/hosts127.0.0.1 of80.orafact.com of80 localhost.localdomain localhost192.168.1.80 of80.orafact.com of80

Configuring Kernel ParametersSet necessary kernel parameters in sysctl.conf file[root@of80 etc]# vi sysctl.conffs.file-max = 6815744kernel.shmmax = 68719476736kernel.shmall = 4294967296kernel.shmmni = 4096kernel.sem = 250 32000 100 128net.ipv4.ip_local_port_range = 1024 65500net.core.rmem_default = 4194304

net.core.rmem_max = 4194304net.core.wmem_default = 262144net.core.wmem_max = 1048576

Run below command to active added kernel parameters[root@of80 etc]# sysctl -p

3 ORAFACT


4/13

10g Grid Control Installation Editing config file

Disable secure linux by editing the /etc/selinux/config file[root@of81 ~]# vi /etc/selinux/configSELINUX=disabled

Verifying RPMVerify necessary RPM and confirm it[root@of80 ]# rpm -qa glibcglibc-2.5-49[root@of80 ]# rpm -qa makemake-3.81-3.el5[root@of80 ]# rpm -qa binutilsbinutils-2.17.50.0.6-14.el5[root@of80 ]# rpm -qa gccgcc-4.1.2-48.el5

[root@of80 ]# rpm -qa libaiolibaio-0.3.106-5[root@of80 ]# rpm -qa glibc-commonglibc-common-2.5-49[root@of80 ]# rpm -qa setarchsetarch-2.0-1.1[root@of80 ]# rpm -qa pdkshpdksh-5.2.14-36.el5[root@of80 ]# rpm -qa openmotifopenmotif-2.3.1-2.el5_4.1[root@of80 ]# rpm -qa sysstat

sysstat-5.0.6-3[root@of80 ]# rpm -qa compat-dbcompat-db-4.2.52-5.1[root@of80 ]# rpm -qacontrol-center-2.16.0-16.el5 control-center[root@of80 ]# rpm -qa libstdc++-devellibstdc++-devel-4.1.2-48.el5[root@of80 ]# rpm -qa libstdc++libstdc++-4.1.2-48.el5[root@of80 ]# rpm -qa compat-libstdc++compat-libstdc++-296-2.96-138

Installing Necessary RPMInstall necessary RPM[root@of80 grid]# rpm -ivh gnome-libs-1.4.1.2.90-44.1.x86_64.rpmwarning: gnome-libs-1.4.1.2.90-44.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID73307de6Preparing... ########################################### [100%]

4 ORAFACT


5/13

10g Grid Control Installation1:gnome-libs ########################################### [100%]

[root@of80 grid]# rpm -ivh openmotif21-2.1.30-11.RHEL4.6.i386.rpmwarning: openmotif21-2.1.30-11.RHEL4.6.i386.rpm: Header V3 DSA signature: NOKEY, key ID443e1821

Preparing... ########################################### [100%]1:openmotif21 ########################################### [100%]

1.2 Installing Grid Control

[suresh@of80 Disk1]# ./runInstallerSelect Enterprise Manager 10g Grid Control Using a New Database and Click Next

Specify Installation Location and Click Next

5 ORAFACT


6/13


Verify all the Product-Specific Pre-Requisite Checks are succeeded and Click Next

Specify Database Name, Database File Location and Click Next

6 ORAFACT


7/13


Specify Optional Configuration and Click Next

Specify Password for Management Service and Database then Click Next

7 ORAFACT


8/13


Click Install

Installation Ongoing........

8 ORAFACT


9/13


Run the Script as root user and Click OK

[root@of80 ~]# /d01/oracle/db10g/allroot.shStarting to execute allroot.sh .........Starting to execute /d01/oracle/db10g/root.sh ......Running Oracle10 root.sh script...The following environment variables are set as:

ORACLE_OWNER= sureshORACLE_HOME= /d01/oracle/db10g

Enter the full pathname of the local bin directory: [/usr/bin]:Copying dbhome to /usr/bin ...Copying oraenv to /usr/bin ...Copying coraenv to /usr/bin ...

Adding entry to /etc/oratab file...Entries will be added to the /etc/oratab file as needed byDatabase Configuration Assistant when a database is createdFinished running generic part of root.sh script.Now product-specific root actions will be performed./var/opt/oracle does not exist. Creating it now./etc/oracle does not exist. Creating it now.Successfully accumulated necessary OCR keys.Creating OCR keys for user 'root', privgrp 'root'..Operation successful.Oracle Cluster Registry for cluster has been initialized

9 ORAFACT


10/13

10g Grid Control InstallationAdding to inittabChecking the status of Oracle init process...Expecting the CRS daemons to be up within 600 seconds.CSS is active on these nodes.

of80CSS is active on all nodes.Oracle CSS service is installed and running under init(1M)Finished execution of /d01/oracle/db10g/root.sh ......Starting to execute /d01/oracle/oms10g/root.sh ......Running Oracle10 root.sh script...The following environment variables are set as:

ORACLE_OWNER= sureshORACLE_HOME= /d01/oracle/oms10g

Enter the full pathname of the local bin directory: [/usr/local/bin]:

The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: yCopying dbhome to /usr/local/bin ...

The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: yCopying oraenv to /usr/local/bin ...

The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: yCopying coraenv to /usr/local/bin ...

Adding entry to /etc/oratab file...Entries will be added to the /etc/oratab file as needed byDatabase Configuration Assistant when a database is createdFinished running generic part of root.sh script.

Now product-specific root actions will be performed.

Finished execution of /d01/oracle/oms10g/root.sh ......Starting to execute /d01/oracle/agent10g/root.sh ......Running Oracle10 root.sh script...The following environment variables are set as:

ORACLE_OWNER= sureshORACLE_HOME= /d01/oracle/agent10g

Enter the full pathname of the local bin directory: [/usr/local/bin]:The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: y

Copying dbhome to /usr/local/bin ...The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: yCopying oraenv to /usr/local/bin ...

The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: yCopying coraenv to /usr/local/bin ...

Entries will be added to the /etc/oratab file as needed byDatabase Configuration Assistant when a database is created

10 ORAFACT


11/13

10g Grid Control InstallationFinished running generic part of root.sh script.Now product-specific root actions will be performed.Finished product-specific root actions.Finished execution of /d01/oracle/agent10g/root.sh ......

Database is Creating....

Error: Recommended tool configuration not succeed. Configure the following then Click OK andRetry to Continue

11 ORAFACT


12/13

10g Grid Control Installation[root@of80 grid]# rpm -ivh xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpmPreparing... ########################################### [100%]

1:xorg-x11-libs-compat ########################################### [100%][root@of80 grid]# mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.org

[root@of80 grid]# ln -s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6[root@of80 grid]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2[root@of80 grid]# ln -s /usr/bin/xdpyinfo /usr/X11R6/bin/xdpyinfo

All Recommended Tools are Configured successfully. Click Next

Click Exit

12 ORAFACT


13/13

10g Grid Control Installation1.3 Connecting Enterprise Manager

Specify the Address in Web page URL to connect Oracle Enterprise ManagerLogin with username(sysman) and password

Home page of Grid Control

Oracle 10g Grid Control Installation Completed Successfully.

******END******

13 ORAFACT