MASKING SOLUTIONS Start as you intend to finish
Mar 28, 2016
MASKING SOLUTIONS
Start as you intend to finish
For over 60 years Greentree-Shercon has been Designing, Manufacturing and Supplying Masking and
Protection products to the world’s Surface Finishing Industry.
• Products manufactured in our own dedicated facilities
• Facilities approved to International Standards
• Approved supplier to all sections of Industry including
Heavy Industry and Aero-engine manufacturers worldwide
• Extensive stocks of products readily available for next day delivery
• Custom engineered solutions from your drawing
• Approved distributor of Shercon, 3M and other
leading manufacturers
Where Greentree-Shercon leads, others follow
GREENTREE-SHERCON
Sigma Close,
Shannon Way,
Tewkesbury
Glos GL20 8ND
Tel: +44(0)1684 533800
Fax: +44(0)1684 297005
www.greentree-shercon.co.uk
WELCOME
Tel:+44(0)1684 533800 INTRODUCTION
A11756
CONTENTS 1www.greentree-shercon.co.uk
MASKING CAPS
Ultrabake™ Caps 4/5Vinyl Caps 6Ultrabake™ Washer Caps 7Ultrabake™ Venting Cap-Plugs 7Ultrabake™ Spade Terminal Caps 8
MASKING PLUGS
Plug Selector Guide 9High-Temperature Ultrabake™ Plugs 10/11Mouse Tail Plugs 12Ultrabake™ Hollow Cone Plugs 12Neoprene Tapered Plugs 13 MASKING SPECIALITY PLUGS
Ultrabake™ Thread Mask Plugs 14Ultrabake™ Flangeless Plugs 15E.P.D.M. Flangeless Plugs 15E.P.D.M. Pull Plugs 16Ultrabake™ Pull Plugs 17Ultrabake™ Dual Purpose Plugs 18Ultrabake™ Hollow Flanged Pull Plugs 18Ultrabake™ Dual Flanged Pull Plugs 18Ultrabake™ Washer Pull Plugs 19Ultrabake™ Multi-Flanged Plugs 19Ultrabake™ Washer Plugs 20Ultrabake™ Flanged Plugs 21Ultrabake™ Hollow Washer Plugs 21Hardy Plugs 22Ultrabake™ Step Plugs 22Nylon Self Threading Plugs 23
CUSTOM DESIGN RUBBER 24/25
MISCELLANEOUS MASKING
Ultrabake™ Sheeting 26Ultrabake™ Cord 26Ultrabake™ Star Tubing 26Ultrabake™ Tubing 27Cut Sleeves 27
HIGH TEMPERATURE TAPES
Tape Selector Guide 28/29PC30 Yellow Tape 30/31PC21 Green Tape 30/31PC90 Blue Tape 30/31PC11 Red Tape 30/31#22 Polyimide Tape 30/31Glass Cloth Tape 32Silicone Rubber Tape 32Lead Foil Tape 33Aluminium Foil Tapes 33Paper Tapes 36/37
MASKING DIE-CUTS
Masking Donuts 34Masking Squares 34Masking Rectangles 34
CUSTOM DIE-CUTS 35
DISCS
PC21 Green Discs 38/39PC90 Blue Discs 38/39PC11 Red Discs 38/39#22 Polyimide Discs 38/39Kwiky-Dot™ Discs 40Glass Cloth Discs 41
KWIKY-MASK 42
HOOKS
Hooks 43Hook Load Chart 44V-Hooks, S-Hooks, C-Hooks & CV-Hooks 45Spin Hooks 46Smart Bar™ 46Tube Spring Hooks 47Mini Hooks 47
ASSOCIATED PRODUCTS 48
STANDARDS, QUALITY AND SERVICE 49
CONTENTS
Tel :+44(0)1684 5338002 SERVING INDUSTRY WORLDWIDE
Serving Industry Worldwide
With its own dedicated in house
design, development and
manufacturing facilities in Europe,
North America and the Far East,
Greentree-Shercon has become a
leading supplier to the finishing and
engineering industry worldwide.
Industries from Aerospace to
Automotive, Off-Shore to Electronic
all benefit from the knowledge and
expertise of over 60 years experience
together with our investment in facilities
to provide our customers with a service
second to none.
Our facilities include:
• Product and materials design and development
• Compression moulding
• Transfer moulding
• Injection moulding
• Rubber to metal bonding
• Die-cutting
• Wire bending
• Rapid prototyping
• Kitting and packing
Our products and facilities are
ISO 9001 and TS16949 approved.
For more information call us on
+44(0) 1684 533800 or e-mail us at
Serving Industry Worldwide
SERVING INDUSTRY WORLDWIDE 3www.greentree-shercon.co.uk
ULTRABAKE™CAPS315°C
• Recommended for powder coating, e-coating, plating, anodising & spray painting
• Ultrabake™ reusable caps
• Designed to mask plain, threaded studs and tube ends
• Push-on pull-off design
• Can also be used as a plug using a dowel or protrusion
• Temperatures up to 315ºC
• The cap is flexible to fit over a number of diameters and shapes
Tel :+44(0)1684 5338004 MASKING CAPS
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C
SC37-0500 CLEAR 0.94 2.54 12.70 1000
SC62 DARK BLUE 1.58 4.75 25.40 1000
SC70 CLEAR M2 2-56 1.78 4.32 25.40 1000
SC93 PINK 3-48 2.36 4.95 19.05 1000
SC93-0500 DARK GREY 3-48 2.36 4.95 12.70 1000
SC93-1000 WHITE 3-48 2.36 4.95 25.40 1000
SC100-0500 DARK BLUE M3 4-40 2.54 5.08 12.70 1000
SC100 LIGHT GREEN M3 4-40 2.54 5.08 25.40 1000
SC109-0500 YELLOW 5-40 2.77 5.46 12.70 1000
SC109 GREY 5-40 2.77 5.46 19.05 1000
SC109-1000 WHITE 5-40 2.77 5.46 25.40 1000
SC125-0500 LIGHT BLUE 6-32 3.18 6.35 12.70 1000
SC125 BLACK 6-32 3.18 6.35 25.40 1000
SC140-0500 CLEAR 3.56 6.73 12.70 1000
SC140 WHITE 3.56 6.73 25.40 1000
SC148-0500 DARK BLUE M4 3.76 6.10 12.70 1000
SC148-0750 DARK GREY M4 3.76 6.10 19.05 1000
SC148 PINK M4 3.76 6.10 25.40 1000
SC156-0500 LIGHT GREEN 8-32 3.96 7.11 12.70 1000
SC156 YELLOW 8-32 3.96 7.11 25.40 1000
SC156-1250 CLEAR 8-32 3.96 7.11 31.75 1000
SC164-1000 BLACK 4.17 7.42 25.40 1000
SC172-0500 GREY 10-24 4.38 7.62 12.70 1000
SC172 LIGHT BLUE 10-24 4.38 7.62 25.40 1000
SC172-1500 CLEAR 10-24 4.38 7.62 38.10 1000
SC180 BLACK M5 4.57 7.11 25.40 1000
SC187-0500 WHITE 12-24 4.75 8.00 12.70 1000
SC187-0750 LIGHT BLUE 12-24 4.75 8.00 19.05 1000
SC187 CLEAR 12-24 4.75 8.00 25.40 1000
SC218 YELLOW 5.54 8.59 25.40 500
SC223-0500 DARK BLUE M6 5.66 8.76 12.70 500
SC223-1000 BLACK M6 5.66 8.76 25.40 500
SC223 PINK M6 5.66 8.76 38.10 500
SC234-0500 WHITE 1/4-20 5.94 9.14 12.70 500
SC234 LIGHT GREEN 1/4-20 5.94 9.14 25.40 500
SC234-1500 YELLOW 1/4-20 5.94 9.14 38.10 500
SC250-0500 CLEAR 6.35 9.65 12.70 500
SC250 GREY 6.35 9.65 25.40 500
SC281-0500 YELLOW 5/16-18 7.14 10.16 12.70 500
SC281 LIGHT BLUE 5/16-18 7.14 10.16 25.40 500
SC295-0500 BLACK M8 7.49 10.67 12.70 500
SC295-1000 LIGHT GREEN M8 7.49 10.67 25.40 500
SC295 CLEAR M8 7.49 10.67 38.10 500
SC312 WHITE 7.92 11.18 25.40 500
SC312-1500 PINK 7.92 11.18 38.10 500
• Colour coded for ease of identification & sorting
• Custom designs available
• Manufactured from Ultrabake™ Silicone rubber to give long life
• Can be used as a parallel plug to mask through holes
• See page 6 for lower temperature caps
• Full technical information and MSDS available
MASKING CAPS 5
ULTRABAKE™CAPS315°C
www.greentree-shercon.co.uk
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C
SC340 BLACK 8.64 11.18 25.40 500
SC355 LIGHT GREEN 3/8-16 9.02 12.32 38.10 500
SC375-0500 PINK M10 9.53 12.83 12.70 500
SC375-0750 DARK BLUE M10 9.53 12.83 19.05 500
SC375 YELLOW M10 9.53 12.83 25.40 500
SC375-1500 GREY M10 9.53 12.83 38.10 500
SC406 LIGHT BLUE 7/16-14 10.31 13.49 25.40 500
SC437 BLACK 11.10 14.35 25.40 500
SC456-1000 PINK M12 11.58 14.76 25.40 500
SC456 CLEAR M12 11.58 14.76 38.10 500
SC456-2953 RUSTY RED M12 11.58 14.76 75.00 250
SC468 WHITE 11.89 15.06 25.40 500
SC480-1000 LIGHT GREY 1/2-13 12.19 15.37 25.40 500
SC480 PINK 1/2-13 12.19 15.37 38.10 500
SC500 LIGHT GREEN 12.70 15.88 38.10 500
SC535 YELLOW M14 13.59 16.13 38.10 250
SC535-3000 GREY M14 13.59 16.13 76.20 250
SC562 LIGHT BLUE 14.28 17.42 38.10 250
SC600 BLACK M16 5/8-11 15.24 18.39 38.10 250
SC625 CLEAR 15.88 19.05 38.10 250
SC625-2500 WHITE 15.88 19.05 63.50 250
SC687 PINK 17.45 20.63 38.10 250
SC730 LIGHT GREEN M19 18.54 21.72 38.10 250
SC750 YELLOW M20 19.05 22.23 38.10 250
SC750-3500 GREY 19.05 22.23 88.90 250
SC780 LIGHT BLUE 19.81 22.99 38.10 250
SC812 BLACK 20.63 23.80 38.10 250
SC875 CLEAR 22.23 25.40 38.10 250
SC937 WHITE 23.80 26.98 38.10 250
SC970 PINK M25 24.64 27.81 38.10 250
SC1000 LIGHT GREEN 25.40 28.58 38.10 250
SC1000-2000 YELLOW 25.40 28.58 50.80 250
SC1062 GREY 26.98 30.15 50.80 100
SC1125 LIGHT BLUE 28.58 31.75 38.10 100
SC1187 BLACK 30.15 33.33 38.10 100
SC1250 CLEAR 31.75 35.10 38.10 100
SC1350 WHITE 34.29 37.69 44.45 100
SC1390 CLEAR 35.31 38.51 50.80 100
SC1500 PINK 38.10 41.28 25.40 100
SC1500-1750 LIGHT GREEN 38.10 41.28 44.45 100
SC1750 YELLOW 44.45 47.63 50.80 100
SC1875 GREY 47.63 50.80 50.80 100
SC2000 LIGHT BLUE 50.80 53.98 50.80 100
Tel :+44(0)1684 5338006 MASKING CAPS
• Recommended for painting, plating and anodising
• Can be used for protection purposes
• Ideal for studs, and tube ends
• Custom designs available
• Reusable
• High quality plastisol material
• Lower temperature vinyl caps available
• Caps are colour coded to ease identification and sorting
• Excellent chemical resistance
• Economical Masking
VINYL CAPS 177°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
PS62-0500 BLACK 1.58 3.53 12.70 1000PS80-0500 YELLOW 2.04 4.57 12.70 1000PS80 BROWN 2.04 4.57 19.05 1000PS93-0500 RED 2.37 4.90 12.70 1000PS93 RED 2.37 4.90 19.05 1000PS109-0500 YELLOW 2.77 5.31 12.70 1000PS109 ORANGE 2.77 5.31 25.40 1000PS125-0500 YELLOW 3.18 5.72 12.70 1000PS125 YELLOW 3.18 5.72 25.40 1000PS140-0500 YELLOW 3.56 6.61 12.70 1000PS140 GREEN 3.56 6.61 25.40 1000PS156-0500 YELLOW 3.97 6.76 12.70 1000PS156 BLUE 3.97 6.76 25.40 1000PS172-0500 GREY 4.37 6.91 12.70 1000PS172 GREY 4.37 6.91 25.40 1000PS187-0500 BLACK 4.75 7.29 12.70 1000PS187 BLACK 4.75 7.29 25.40 1000PS187-1500 BLACK 4.75 7.29 38.10 1000PS203-0500 YELLOW 5.16 7.95 12.70 1000PS203 BROWN 5.16 7.95 25.40 1000PS218-0500 YELLOW 5.54 8.33 12.70 1000PS218 RED 5.54 8.33 25.40 1000PS234-0500 YELLOW 5.94 8.74 12.70 1000PS234 ORANGE 5.94 8.74 25.40 1000PS250-0500 YELLOW 6.35 9.40 12.70 1000PS250 YELLOW 6.35 9.40 25.40 1000PS281-0500 YELLOW 7.14 9.94 12.70 1000PS281 GREEN 7.14 9.94 25.40 1000PS312-0500 BLUE 7.93 10.98 12.70 1000PS312 BLUE 7.93 10.98 25.40 1000PS343 GREY 8.71 11.76 25.40 1000PS375 BLACK 9.53 12.83 25.40 1000PS406 BROWN 10.31 13.61 25.40 1000PS437 RED 11.10 14.40 25.40 1000PS500 ORANGE 12.70 15.50 25.40 500PS531 YELLOW 13.49 16.41 25.40 500PS562 GREEN 14.28 17.33 25.40 500PS625 BLUE 15.88 18.92 25.40 500PS687 GREY 17.45 20.50 25.40 500PS750 BLACK 19.05 22.35 25.40 500PS812 YELLOW 20.62 23.93 25.40 500PS875 ORANGE 22.23 25.53 25.40 500PS937 YELLOW 23.80 27.10 25.40 500PS1000 GREEN 25.40 28.70 25.40 500PS1062 BLUE 26.97 30.28 25.40 500PS1125 GREY 28.58 31.88 25.40 500PS1187 YELLOW 30.15 33.45 25.40 500PS1250 BROWN 31.75 35.05 25.40 500PS1375 RED 34.93 38.23 25.40 500PS1500 BLACK 38.10 41.40 25.40 500PS1625 YELLOW 41.28 44.58 25.40 500PS1750 BLACK 44.45 47.75 25.40 500PS1875 YELLOW 47.63 50.93 25.40 500PS2000 YELLOW 50.80 54.10 25.40 500
ULTRABAKE™WASHER CAPS 315°C
Part Number
Colour Fits Thread Dimensions (mm) Quantity Per Bag
Metric UNC A B C D
WC125-0500 CLEAR 6-32 12.70 3.18 6.60 25.40 500
WC156-0500 CLEAR 8-32 12.70 3.96 8.13 25.40 500
WC172-0500 CLEAR 10-24 12.70 4.37 9.78 25.40 500
WC027-012 LIGHT GREEN M3 4-40 11.99 2.69 6.20 25.40 500
WC037-012 PINK M4 11.99 3.71 6.71 25.40 500
WC046-015 CLEAR M5 15.01 4.60 8.20 25.40 500
WC056-015 RED M6 1/4-20 15.01 5.59 8.71 25.40 500
WC075-018 BLACK M8 5/16-18 18.01 7.49 10.69 25.40 250
WC095-018 YELLOW M10 7/16-14 20.83 9.50 12.70 38.1 250
WC115-025 CLEAR M12 1/2-13 24.99 11.51 16.69 38.1 250
WC155-031 PURPLE M16 30.99 15.49 20.70 38.1 250
WC195-038 GREY M20 38.00 19.51 24.69 38.1 250
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
UVCP234 YELLOW 5.94 11.43 25.40 250
UVCP355 GREEN 9.02 14.35 38.10 250
UVCP500 BLUE 12.70 19.05 38.10 100
UVCP1000 RUSTY RED 25.40 31.75 38.10 50
• Recommended for powder coating, e-coating, plating and anodising
• Provides a concentric mask around a stud or hole paint free earthing area
• May be used as a cap or plug
• Reusable
• Conformable
ULTRABAKE™VENTING CAP-PLUGS 315°C
MASKING CAPS 7www.greentree-shercon.co.uk
• Fits over studs and tube ends
• Unique vented design eliminates blow off through expansion
• Oversize flanged head aids masking and removal
• Special rectangular cap used for powder coating, e-coating, plating and anodising
• Ideal for masking earthing tabs
• Reusable
• Chamfered leading edge to eliminate paint build up
• Custom designs available
Tel :+44(0)1684 5338008 MASKING CAPS
ULTRABAKE™SPADE TERMINAL CAPS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
SRC-1 CLEAR 6.30 11.87 0.76 1000
SRC-2 RUSTY RED 6.30 11.58 0.76 1000
SRC-3 CLEAR 11.94 8.28 1.02 1000
SRC-4 YELLOW 11.68 7.11 0.89 1000
SRC-5 PINK 12.45 18.92 1.19 1000
PLUGS 9
PLUG SELECTOR GUIDE
www.greentree-shercon.co.uk
Description Fits Hole Size (mm)
Page
From To
Tapered PlugsOver 50 different sizes
0.79 127.00 10/11 & 13
Tapered Plugs with HandleHandle provides extra grip during installation and removal
0.79 55.76 11
Hollow Cone PlugsIdeal for slotted and oval holes
3.74 19.99 12
Mouse Tail PlugsFor very small holes
0.64 2.03 12
Thread Mask PlugsMasks the first thread of a threaded hole
2.72 22.76 14
Flangeless PlugsProtects the thread of a blind hole
3.99 31.90 15
Pull PlugsMasks the length of a through hole
1.57 35.05 16/17
Dual Purpose PlugsMasks square and round holes
9.53 25.40 18
Hollow Flanged Pull PlugsProtects the chamfer of threaded through holes
5.00 17.15 18
Dual Flanged Pull PlugsIdeal for weld nuts
5.00 16.99 18
Multi Flanged PlugsOne size fits a multitude of holes
4.00 23.00 19
Washer Pull PlugsProvides a paint free area around holes
2.67 26.92 19
Washer PlugsDouble use, provides paint free area around a hole
2.79 12.70 20
Hollow Washer PlugsFor masking the earthing area around the hole
6.30 22.00 21
Flanged PlugsMasks a hole and first thread
7.39 13.69 21
Step PlugsProvides paint free area around a hole
3.00 8.23 22
Hardy PlugsMasks a thread and counterbore
5.60 11.00 22
Self Threading PlugsSelf tapping leak proof seal
1.52 11.34 23
Custom PlugsMaterial temperatures up to 315ºC and designs to suit your application
24/25
• Recommended for powder coating, e-coating, plating and anodising
• Plugs threaded or non-threaded through and blind holes
• Colour coding increases visibility and eases the job of sorting the plugs after use
• Reusable
Tel :+44(0)1684 53380010 PLUGS
HIGH TEMPERATURE ULTRABAKE™ PLUGS 315°C
Colour Solid PlugPart No.
Hollow PlugPart No.
Plug with HandlePart No.
Quantity Per Bag
CLEAR UP99-04 UP99-H 1000BLUE M27860-01 500
DARK GREEN MSP101L 1000LIGHT GREEN UP100-04 UP100-H 1000
PINK UP101-04 UP101-H 1000BLACK UP102-04 UP102-H 1000
YELLOW MSP102L 1000CLEAR MPP-UB 500CLEAR MPP-SP 500CLEAR MSP103L 1000
DARK RED UP103-04 UP103-H 1000WHITE UP105-04 UP105-H 100
YELLOW UP104-04 UP104-H 100RED MSP104L 1000
WHITE MSP105L 500CLEAR UP000-04 100PURPLE UP00-04 UP00-H 100PINK MSP106L 500
LIGHT GREEN UP108-04 UP108-H 100PINK UP0-04 UP0-H 100
CLEAR MSP107L 250BLACK UP1-04 100RED UP2-04 UP2-H 100
CLEAR MSP108L 250YELLOW UP3-04 UP3-H 100CLEAR MSP109L 250CLEAR UP4-04 UP4-H 100
LIGHT GREEN UP5-04 HUP5-04 HUP5-H 100PINK HUP5.5-04 100
DARK GREEN UP6-04 HUP6-04 HUP6-H 100YELLOW HUP6.5-04 100
LIGHT BLUE UP7-04 (50) HUP7-04† HUP7-H† (50) 50/100WHITE HUP7.5-04 (100) 100CLEAR UP8-04 (25) HUP8-04* (100) 25/100PINK HUP 8.5-04 100RED UP9-04 (25) HUP9-04 (100) 25/100
DARK GREEN HUP9.5-04 50CLEAR UP10-04 (25) HUP10-04 (50) HUP10-H (25) 25/50
YELLOW HUP10.5-04 50DARK BLUE UP11-04 (25) HUP11-04 (50) HUP11-H (25) 25/50
DARK GREEN HUP11.5-04 50RED UP12-04 (25) HUP12-04 (50) 25/50
LIGHT BLUE HUP13-04 50PURPLE HUP13.5-04 50
LIGHT GREEN HUP13.7-04 10WHITE HUP14-04 10
RUSTY RED HUP15-04 10CLEAR HUP16-04 5
† Dark Blue*Light Blue
SOLID TAPERED PLUGS
HIGH TEMPERATURE ULTRABAKE PLUGS
PLUGS 11www.greentree-shercon.co.uk
HIGH TEMPERATURE ULTRABAKE™ PLUGS 315°C
Dimensions (mm)Top A
Bottom B
Length C D E
Tail Length F
0.79 3.18 15.88 9.521.50 7.00 57.001.58 4.75 19.051.60 3.18 15.88 9.521.60 4.78 15.88 12.823.18 6.35 19.05 12.703.18 6.35 25.403.18 9.53 31.753.18 12.70 50.804.75 8.71 25.404.78 8.74 15.88 12.826.35 9.53 12.70 12.706.35 9.53 19.05 12.706.35 11.10 25.408.03 14.15 25.408.74 12.70 20.65
10.31 15.09 25.40 19.0511.10 17.45 25.4011.13 15.88 22.23 19.0512.70 16.66 25.40 19.0514.28 19.05 25.4014.30 19.05 25.4015.88 19.84 25.40 19.0515.88 20.32 25.4018.26 23.83 25.40 19.0519.05 23.50 25.4019.05 25.40 25.40 19.0523.01 27.00 25.40 10.31 19.05 19.0524.36 28.17 25.40 11.94 17.7826.19 31.75 25.40 13.49 19.05 19.0528.58 34.14 25.40 15.24 19.0530.18 36.53 25.40 13.49 19.0530.15 38.10 25.40 17.27 19.05 19.0533.35 41.28 25.40 20.65 19.0535.71 42.88 25.40 22.86 19.0537.31 44.45 25.40 24.61 19.0538.10 46.05 25.40 25.40 19.0541.28 50.01 25.40 28.58 19.05 19.0544.45 52.83 25.40 30.48 19.0547.63 55.96 25.40 34.93 19.05 19.0550.80 62.71 25.40 31.75 15.8854.00 63.50 25.40 34.93 15.8857.94 68.25 25.40 38.89 15.8861.90 75.00 34.93 42.85 25.4068.00 81.99 38.10 42.60 25.4076.20 88.90 38.10 50.80 25.4082.50 101.00 38.10 57.15 25.4088.90 127.00 50.80 63.50 38.10
• More flexible than solid plugs and therefore easier to insert
• Conformable
• Significant savings over traditional tapered plugs
TAPERED PLUG WITH HANDLE
HOLLOW TAPERED PLUG
• Excellent sealing power and rugged durability ensure quality results over repeated usage
• Handle gives better grip during installation and removal
Tel :+44(0)1684 53380012 PLUGS
MOUSE TAIL PLUGS 315°C/177°C
ULTRABAKE™ HOLLOWCONE PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C
UHCP-1 RUSTY RED 14.73 3.74 48.26 250
UHCP-2 BLUE 19.99 10.01 73.66 100
• Recommended for powder coating, e-coating, anodising and plating
• Ideal for slotted and oval holes
• Hollow configuration and tapered design makes this plug highly versatile for irregular holes
• Reusable
Part Number
Dimensions (mm) Material Quantity Per Bag
A B C D
SMT100 50.80 2.03 12.70 0.64 Ultrabake (315º) 500
MT100 50.80 2.03 12.70 0.64 EPDM (177º) 500
• Recommended for powder coating, e-coating, anodising and plating• Ideal for small hard to reach holes• Stretches to provide leakproof seal• Reusable• Choice of materials• Great resistance to chemicals
• Recommended for painting, plating, anodising and shot blasting
• Available in black and green (carbon free) neoprene
• Reusable
• They offer thermal stability, good physical strength, good rigidity, excellent abrasion resistance, high resilience with low compression set and resistance to UV radiation.
• Custom designs available
• See pages 10 -11 for higher temperature plugs.
PLUGS 13www.greentree-shercon.co.uk
NEOPRENE TAPERED PLUGS 177°C
Part Number
Part Number
Dimensions (mm) Quantity Per Bag
A B C
GN99 BN99 0.79 3.18 15.88 1000
GN100 BN100 1.59 3.18 15.88 1000
GN101 BN101 1.59 4.76 15.88 1000
M27860-01 1.50 7.00 57.00 500
GN102 BN102 3.18 6.35 19.05 1000
MPP-GN 3.18 12.70 50.80 500
GN103 BN103 4.76 8.73 15.88 1000
GN104 BN104 6.35 9.53 19.05 1000
GN105 BN105 6.35 9.53 12.70 100
GN106 BN106 8.73 11.11 17.46 100
GN000 BN000 8.73 12.70 20.64 100
GN107 BN107 9.53 14.29 25.40 100
GN00 BN00 10.32 15.08 25.40 100
GN108 BN108 11.11 15.88 20.64 100
GN109 BN109 12.70 16.67 25.40 100
GN110 BN110 14.29 19.05 25.40 100
GN111 BN111 15.88 19.84 25.40 100
GN112 BN112 18.26 23.81 25.40 100
GN114 BN114 19.05 25.40 25.40 100
GN116 BN116 23.02 26.99 25.40 100
GN118 BN118 26.19 31.75 25.40 100
GN120 BN120 30.16 36.51 25.40 100
GN122 BN122 33.34 41.28 25.40 50
GN124 BN124 37.31 44.45 25.40 50
GN126 BN126 41.28 50.01 25.40 50
GN128 BN128 47.63 55.96 25.40 25
GN129 BN129 50.80 62.71 25.40 25
GN130 BN130 53.98 63.50 25.40 25
GN132 BN132 57.94 68.26 25.40 25
GN133 BN133 61.91 75.01 37.31 1
GN134 BN134 76.20 88.90 38.10 1
GN136 BN136 82.55 101.60 38.10 1
GN138 BN138 88.90 127.00 50.80 1
Tel :+44(0)1684 53380014 MASKING SPECIALITY PLUGS
ULTRABAKE™ THREAD MASK PLUGS 315°C
• Recommended for powder coating, e-coating, plating and anodising
• Designed to mask the first thread of a threaded hole
• Sizes for metric and UNC threads
• Hollow design to improve fit
• LS (Long Series) have longer handles for harder to reach areas
• Longer sealing area
• Reusable
• Ideal for shallow blind holes, weld nuts
• Tapered to ease insertion
Part Number
Colour Dimensions (mm) Quantity Per BagA B C D
UTM-M3*0.5LS RED 2.72 5.33 20.83 3.51 1000
UTM-M4*0.7LS PINK 3.58 5.84 21.84 4.09 1000
UTM-M5*0.8LS PURPLE 4.52 5.59 20.83 5.26 500
UTM-M6*1 CLEAR 5.28 5.00 14.00 6.30 500
UTM-M6*1LS CLEAR 5.28 7.49 24.49 6.30 500
UTM-1/4-20 YELLOW 5.54 5.08 11.43 6.60 500
UTM-1/4-20LS YELLOW 5.54 7.09 23.42 6.60 500
UTM-1/4-36LS DARK BLUE 5.89 6.86 23.42 6.60 500
UTM-5/16-18 LIGHT GREEN 7.06 5.08 12.70 8.13 500
UTM-5/16-18LS LIGHT GREEN 7.06 7.09 22.71 8.13 500
UTM-M8*1.25 DARK BLUE 7.19 5.00 12.24 8.41 500
UTM-M8*1.25LS DARK BLUE 7.19 7.49 22.76 8.41 500
UTM-5/16-40LS RUSTY RED 7.52 7.09 22.71 8.13 250
UTM-3/8-16 WHITE 8.53 6.35 15.24 9.78 500
UTM-3/8-16LS WHITE 8.53 8.36 25.25 9.78 250
UTM-3/8-36LS YELLOW 9.07 8.36 25.25 9.78 250
UTM-M10*1.5 PINK 9.09 7.01 16.00 10.39 250
UTM-M10*1.5LS PINK 9.09 7.01 24.00 10.39 250
UTM-7/16-14 PINK 9.96 8.89 19.05 11.18 250
UTM-M12*1.75 RUSTY RED 10.82 8.79 20.12 12.42 250
UTM-1/2-13 CLEAR 11.46 8.89 19.05 12.95 250
UTM-M16*2 LIGHT GREEN 14.81 11.00 23.01 16.61 100
UTM-M20*2.5 YELLOW 18.39 13.00 28.50 20.60 100
UTM-M24*2LS GREY 22.76 16.00 37.85 24.05 50
MASKING SPECIALITY PLUGS 15www.greentree-shercon.co.uk
ULTRABAKE™ FLANGELESS PLUGS 315°C
• Recommended for powder coating, e-coating, plating and anodising
• Designed to protect threaded holes without masking the surrounding area
• The shallow tapered design and hollow core allows a single plug to be used for different sized holes
• Colour coding increases visibility and eases the job of sorting the plugs after use
Part Number
Colour Dimensions (mm) Quantity Per BagB A C
UFP00250 CLEAR 3.99 5.84 25.40 250
UFP00312 BLACK 5.61 8.00 25.40 250
UFP00406 YELLOW 8.00 9.65 25.40 250
UFP00468 CLEAR 9.65 11.94 25.40 250
UFP00562 LIGHT BLUE 12.19 14.61 25.40 250
UFP00625 PURPLE 13.61 16.00 25.40 250
UFP00718 RUSTY RED 16.00 18.01 25.40 250
UFP00787 LIGHT GREEN 18.01 19.99 25.40 100
UFP00866 GREY 19.99 22.00 25.40 100
UFP00945 CLEAR 22.00 24.00 25.40 100
UFP01024 BLACK 24.00 26.01 25.40 100
UFP01102 DARK GREEN 26.01 27.99 25.40 100
UFP01134 PURPLE 27.00 29.13 25.40 50
UFP01178 LIGHT BLUE 27.99 30.00 25.40 50
UFP01216 RUSTY RED 29.01 30.99 25.40 50
UFP01234 YELLOW 31.90 30.00 25.40 50
E.P.D.M. FLANGELESS PLUGS 149°C
Part Number
Dimensions (mm) Quantity Per BagB A C
FP00250 3.99 5.84 25.40 250
FP00312 5.61 8.00 25.40 250
FP00406 8.00 9.65 25.40 250
FP00468 9.65 11.94 25.40 250
FP00562 12.19 14.61 25.40 250
FP00625 13.61 16.00 25.40 250
FP00718 16.00 18.01 25.40 250
FP00787 18.01 19.99 25.40 100
FP00866 19.99 22.00 25.40 100
FP00945 22.00 24.00 25.40 100
FP01024 24.00 26.01 25.40 100
FP01102 26.00 27.99 25.40 100
• Recommended for plating, anodising and spray-painting
•Tapered shallow design and hollow core allows multiple applications
• Protect plain or threaded holes without masking the surrounding area
•Chemical resistance
•Excellent sealing characteristics eliminate ingress
Tel :+44(0)1684 53380016 MASKING SPECIALITY PLUGS
E.P.D.M. PULL PLUGS177°C
• Recommended for painting, plating, anodising and shot blasting
• Plug threaded or non-threaded parallel through holes
• Reusable
•Colour black
• Custom designs available
•Long handles aiding insertion and removal
•Oversized to eliminate ingress
EPDM PULL PLUGS 177ºCPart Number
Dimensions (mm)A B C D
PP06 1.57 1.17 8.56 9.53
PP07 1.70 1.19 15.49 15.88
PP08 1.85 1.17 14.99 15.55
PP09 2.31 1.32 15.88 15.88
PP10 2.36 1.27 17.78 17.78
PP11 2.64 1.58 15.88 13.34
PP11A 3.18 1.58 15.88 15.88
PP14 3.30 2.36 25.40 25.40
PP15 3.30 2.36 17.78 16.51
PP17 3.61 2.16 14.17 15.88
PP18 3.91 2.11 15.88 16.05
PP20 3.96 1.58 19.05 15.88
PP22 4.12 2.44 14.76 15.88
PP23 4.95 2.79 15.88 15.88
PP30 5.54 3.30 25.40 25.40
PP33 5.72 3.18 25.40 25.40
PP37 6.53 3.30 25.40 25.40
PP40 6.99 3.18 23.37 23.80
PP40LS 6.99 3.71 50.80 50.80
PP42 8.03 3.86 23.11 25.40
PP42A 8.46 6.38 27.94 19.23
PP43 8.51 3.89 25.40 25.40
PP50 8.89 4.90 23.50 22.38
PP55 9.75 3.91 25.40 25.40
PP55LS 9.75 5.18 50.80 50.80
PP60 10.36 4.85 25.40 25.60
PP66 11.28 6.48 25.15 25.40
PP67 11.30 6.48 25.40 25.40
PP70 11.99 6.17 25.40 25.40
PP73 12.60 6.35 25.40 25.40
PP73LS 12.60 6.68 50.80 50.80
PP77 12.95 6.50 24.28 25.40
PP80 13.46 6.35 25.40 25.40
PP85 14.50 7.70 25.43 25.40
PP89 15.55 6.35 25.40 25.40
PP89LS 15.55 8.26 50.80 50.80
PP90 16.26 9.53 25.40 25.40
PP95 17.96 9.53 33.68 31.75
PP95LS 17.96 9.53 50.80 50.80
PP97 18.49 9.53 27.94 28.58
PP100 19.56 9.53 23.55 25.40
PP100LS 19.56 10.36 50.80 50.80
PP105 20.50 10.87 31.75 31.75
PP110 22.56 9.45 25.40 25.40
PP120 25.91 9.53 24.64 25.40
PP140 35.05 18.59 38.10 38.10
MASKING SPECIALITY PLUGS 17www.greentree-shercon.co.uk
ULTRABAKE™ PULL PLUGS315°C
315ºCHole Fit Thread Quantity
Per Bag
1/20 500
1/16 500
1/16 M2 500
5/64 500
5/64 500
3/32 500
7/64 500
1/8 500
1/8 500
1/8 500
9/64 500
9/64 500
5/32 500
11/64 M5 500
3/16 M6 500
7/32 500
1/4 500
17/64 M8 500
17/64 M8 500
19/64 500
5/16 500
5/16 500
11/32 500
3/8 M10 250/500
3/8 M10 250/500
13/32 250/500
7/16 M12 250/500
7/16 250/500
29/64 250/500
15/32 250/500
15/32 250/500
1/2 250/500
33/64 M14 250/500
37/64 250/500
19/32 250/500
19/32 100/500
5/8 100
13/16 100
13/16 100
23/32 100
3/4 M20 100
3/4 M20 100
25/32 100
7/8 100
1 100
1-3/8 50
Part Number
Colour
SPP06 CLEAR
SPP07 PINK
SPP08 LIGHT GREEN
SPP09 YELLOW
SPP10 GREY
SPP11 LIGHT BLUE
SPP11A WHITE
SPP14 CLEAR
SPP15 PINK
SPP17 LIGHT GREEN
SPP18 YELLOW
SPP20 GREY
SPP22 LIGHT BLUE
SPP23 WHITE
SPP30 CLEAR
SPP33 PINK
SPP37 LIGHT GREEN
SPP40 YELLOW
SPP40LS WHITE
SPP42 GREY
SPP42A LIGHT BLUE
SPP43 WHITE
SPP50 CLEAR
SPP55 PINK
SPP55LS DARK BLUE
SPP60 LIGHT GREEN
SPP66 YELLOW
SPP67 GREY
SPP70 LIGHT BLUE
SPP73 WHITE
SPP73LS LIGHT GREEN
SPP77 CLEAR
SPP80 PINK
SPP85 LIGHT GREEN
SPP89 YELLOW
SPP89LS CLEAR
SPP90 GREY
SPP95 LIGHT BLUE
SPP95LS DARK GREEN
SPP97 WHITE
SPP100 CLEAR
SPP100LS YELLOW
SPP105 PINK
SPP110 LIGHT GREEN
SPP120 YELLOW
SPP140 GREY
• Recommended for painting, powder coating, e-coating, plating and anodising
• Plug threaded or non-threaded through holes
• Ultrabake™ Pull Plugs are colour coded to increase visibility and to ease selection
• High Temperature
• Reusable
• Custom designs available
ULTRABAKE™ PULL PLUGS
Tel :+44(0)1684 53380018 MASKING SPECIALITY PLUGS
ULTRABAKE™ DUAL PURPOSE PLUGS 315°C
ULTRABAKE™ HOLLOWFLANGED PULL PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D
HFPP-M6 BLUE 5.00 6.78 23.62 4.45 1000HFPP-M10 RUSTY RED 8.51 11.18 25.40 7.11 500HFPP-M12 GREEN 10.59 13.00 28.58 8.38 250HFPP-M20 YELLOW 17.56 20.32 31.75 12.95 100
ULTRABAKE™ DUAL FLANGED PULL PLUGS 315°C
Part Number
Colour Thread Size
Dimensions (mm) Quantity Per Bag
A B C D
DFPP-M6 DARK GREEN M6 5.00 7.80 6.81 32.99 1000DFPP-M8 RUSTY RED M8 6.71 9.50 7.90 34.01 1000DFPP-M10 DARK GREEN M10 8.51 11.30 8.99 35.00 500DFPP-M12 PURPLE M12 10.31 13.00 11.61 45.01 250DFPP-M16 WHITE M16 13.49 16.99 14.00 50.01 250DFPP-M20 DARK BLUE M20 16.99 21.01 18.01 57.99 100
• Recommended for painting, plating, e-coating, powder coating and anodising• Masks off chamfer, first thread and last thread• Recommended for weld nuts• Designed to pull through in same direction as applied
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E F
UDPP-0500 PURPLE 15.88 9.53 12.70 15.88 9.53 12.70 250UDPP-0625 RUSTY RED 19.05 12.70 15.88 19.05 12.70 15.88 250UDPP-0750 GREEN 19.05 15.88 19.05 19.05 15.88 19.05 100UDPP-1000 RUSTY RED 25.40 22.23 25.40 25.40 22.23 25.40 100
• Recommended for painting, plating, e-coating, powder coating and anodising• Fits a wide range of square and round holes
• Recommended for painting, plating, e-coating, powder coating and anodising• Masks off the lead-in chamfer of threaded through holes and weld nuts• Hollow design to aid heat transfer• Designed to pull through in same direction as applied• Custom designs available
• Recommended for powder coating, e-coating, plating and anodising
• Ideal for threaded or non-threaded holes
• Dual purpose plug: to mask hole and earthing area
• Standard and longer length available • Colour coded
MASKING SPECIALITY PLUGS 19www.greentree-shercon.co.uk
ULTRABAKE™ WASHER PULL PLUGS 315°C
ULTRABAKE™MULTI-FLANGED PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E F
UMFP4-10 BLUE 4.00 6.00 8.00 10.00 N/A 13.70 250
UMFP8-10 RUSTY RED 8.00 10.00 12.00 14.00 16.00 23.00 100
UMFP10-18 GREEN 10.00 12.00 14.00 16.00 18.00 22.70 100
M14023-01 ORANGE 10.00 12.00 14.00 16.00 18.00 31.75 100
• One plug fits numerous hole sizes• Handle for easy removal• Ideal for powder coating and wet paint• Designed in conjunction with an engineer from a leading manufacturer
Part Number
Colour ThreadSize
Dimensions (mm) Quantity Per Bag
A B C D E F
UWPP-M3 DARK BLUE M3 10.01 2.67 2.72 9.91 1.52 2.29 250
UWPP-M4 DARK GREEN M4 10.01 3.56 2.72 9.91 2.03 3.05 250UWPP-M4LS BLUE M4 10.01 3.56 2.72 22.23 2.03 4.83 250UWPP-M5 CLEAR M5 10.01 4.47 2.72 9.91 2.54 3.81 250UWPP-M6 WHITE M6 15.01 5.36 4.19 9.91 3.05 4.57 250UWPP-M6LS RUSTY RED M6 15.01 5.36 4.19 38.10 3.05 6.35 250UWPP-M8 GREY M8 15.01 7.19 4.19 9.91 4.09 6.10 250UWPP-M10 YELLOW M10 19.99 9.53 5.33 9.91 5.44 8.13 100UWPP-M12 PINK M12 19.99 10.87 5.33 9.91 6.20 9.14 100UWPP-500 PINK 10-24 12.70 4.24 2.72 9.91 2.41 3.56 250UWPP-500LS GREEN 10-24 12.70 4.24 2.72 28.58 2.41 5.72 250UWPP-562 YELLOW 12-24 14.28 4.90 2.72 9.91 2.79 4.06 250UWPP-562LS BLACK 12-24 14.28 4.90 2.72 38.10 2.79 5.72 250UWPP-625 GREEN 1/4-20 15.88 5.72 2.72 9.91 3.25 4.83 250UWPP-688 CLEAR 5/16-18 17.48 7.21 4.19 9.91 4.12 6.10 250UWPP-812 GREY 3/8-16 20.62 8.69 4.19 9.91 4.95 7.37 100UWPP-922 WHITE 7/16-14 23.42 10.16 5.33 9.91 5.79 8.64 100UWPP-1060 DARK BLUE 1/2-13 26.92 11.66 5.33 9.91 6.66 9.91 100
• Recommended for powder coating, e-coating, anodising and plating
• Ideal for masking the earthing area around blind and through holes
•Single plug can be used for 2 hole sizes
• Reusable
• Colour coded
• Tapered design to aid insertion
• Second plug can be used as a handle
Tel :+44(0)1684 53380020 MASKING SPECIALITY PLUGS
ULTRABAKE™ WASHER PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E F
UW-380 YELLOW 6.35 2.44 3.25 8.84 5.00 12.80 1000
UW-M3 DARK GREEN 7.01 2.79 3.71 5.59 5.00 7.39 1000
UW-405 CLEAR 8.10 3.15 6.40 9.78 5.51 12.98 1000
UW-415 LIGHT GREEN 12.75 3.23 4.72 9.68 5.13 12.62 500
UW-440 YELLOW 15.88 3.23 6.50 9.09 4.85 12.85 500
UW-400 BLACK 7.93 3.40 3.99 12.45 4.90 12.75 1000
UW-410 PINK 9.65 3.48 4.06 11.53 4.98 12.88 1000
UW-M4 PINK 8.99 3.61 4.70 7.19 5.00 9.40 1000
UW-M5 CLEAR 10.00 4.50 5.69 8.99 5.00 11.41 1000
UW-412 RED 9.53 5.03 6.96 12.50 5.03 12.70 500
UW-M6 RED 12.50 5.31 6.71 10.59 5.00 13.41 500
UW-420 DARK BLUE 12.83 6.20 6.53 12.93 4.91 13.11 500
UW-M8 BLACK 16.99 7.11 8.71 14.20 5.00 17.40 500
UW-M10 YELLOW 21.01 9.60 10.69 19.20 5.00 21.41 250
UW-M12 CLEAR 24.00 10.90 12.70 21.79 5.00 25.40 250
• Ideal for powder coating and wet paint
• Used in conjunction with insertion tool/dowel
• Specifically designed to mask off through holes plus counter sink
MASKING SPECIALITY PLUGS 21www.greentree-shercon.co.uk
ULTRABAKE™ FLANGED PLUGS 315°C
ULTRABAKE™HOLLOW WASHER PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E
SFP-M8 YELLOW 7.39 11.99 4.50 42.01 11.99 250
SFP-M10 PINK 8.71 14.71 7.01 46.99 13.01 250
SFP-M12 CLEAR 10.69 15.80 8.00 51.00 14.00 250
SFP-M14 GREY 13.69 18.01 10.59 64.01 15.01 250
• Recommended for powder coating, e-coating, anodising and plating
• Provides a concentric mask around a hole
• Ideal for masking the earthing area around threaded and through holes
• Reusable
• Can be pulled into sheet metal holes
• Conforms to irregular shapes
• Can be used as a plug or cap
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D
HWP-0330 CLEAR 12.50 6.30 23.01 3.30 200
HWP-0450 BLACK 16.00 8.51 24.99 4.50 200HWP-0500 YELLOW 16.51 10.01 27.99 5.00 200HWP-0800 DARK BLUE 19.00 14.00 35.99 8.00 200HWP-1150 PURPLE 24.99 17.50 38.00 11.51 200HWP-1350 RUSTY RED 27.99 19.51 51.00 13.49 100HWP-1480 GREY 25.40 20.80 49.00 14.81 100HWP-1600 CLEAR 30.99 22.00 53.01 16.00 100
Tel :+44(0)1684 53380022 MASKING SPECIALITY PLUGS
HARDY PLUGS 315°C
ULTRABAKE™ STEP PLUGS 315°C
Part Number
Colour Dimensions (mm) Quantity Per Bag
A B C D E
SP-3 LIGHT BLUE 7.01 3.00 2.36 7.01 13.01 500
SP-4 LIGHT GREEN 8.00 5.00 2.85 8.00 14.00 500
SP-5 PURPLE 8.99 5.99 3.94 8.99 16.03 500
SP-6 BLACK 10.16 6.43 4.78 10.16 17.63 250
SP-8 WHITE 12.42 8.23 5.95 9.75 17.32 250• Recommended for powder coating, e-coating, anodising and plating
• Provides a clean area around diameter of hole for earthing purposes
• Colour coded
• Eliminates 2-step masking
• Plugs threaded or non-threaded blind holes
• Reusable
• Handle aides insertion & removal
Part Number
Colour Thread Dimensions (mm) QuantityPer Bag
A B C D E F G
M20061-01 PINK M6 5.60 9.00 3.00 1.50 6.50 9.50 13.00 100
M20062-01 RED M8 7.50 11.00 3.70 2.00 7.90 10.10 15.00 100
M20063-01 BLUE M10 9.30 13.50 5.50 3.00 10.00 10.00 16.80 100
M20064-01 YELLOW M11 10.00 12.40 5.50 3.00 9.00 10.00 16.80 100
M20065-01 GREEN M12 11.00 13.70 6.00 4.00 12.90 12.10 21.80 100
• Suitable for powder coating, e-coating, anodising and plating
• Specially designed for weld nut and blind hole applications
• Stepped plug masks off the first thread
MASKING SPECIALITY PLUGS 23www.greentree-shercon.co.uk
NYLON SELF-THREADING PLUGS 82°C
• Recommended for plating, anodising and spray painting
• Used for tapped holes
• Self tapping for liquid tight seal
• Excellent chemical resistance
• Oversized design to eliminate ingress (leaks)
• Custom designs available
Part Number
Thread Sizes Dimensions (mm)QuantityPer BoxUNC UFC A B
STP-2 2-56 2-64 1.52 2.06 500
STP-3 3-48 3-56 1.93 2.31 500
STP-4 4-40 4-48 2.03 2.66 500
STP-6 6-32 6-40 2.70 3.14 500
STP-8 8-32 8-36 3.39 4.01 500
STP-10 10-24 10-32 3.68 4.56 500
STP-12 12-24 12-28 4.21 4.97 100
STP-1/4 1/4-20 1/4-28 4.82 5.97 100
STP-5/16 5/16-18 5/16-24 6.06 7.12 100
STP-3/8 3/8-16 3/8-24 7.68 8.45 100
STP-1/2 1/2-13 1/2-20 9.99 11.34 100
• Improve productivity
• Increase production line speeds
• Create better finish quality
•Reject/rework fewer parts
•Eliminate manual steps from the finishing process
•Reusable
•Lowering cost
•Satisfying ‘green’ objectives
CUSTOM RUBBER SHAPES & MOULDINGS for masking & protection
Tel :+44(0)1684 53380024 CUSTOM DESIGN RUBBER
Call us on 01684 533 800
or e-mail us at
for more information or a visit.
CUSTOM RUBBER SHAPES & MOULDINGS for masking & protection
CUSTOM DESIGN RUBBER 25www.greentree-shercon.co.uk
Recent advances in custom
moulded rubber masks
have revolutionised the masking
industry. Manufactured from
the latest high-tech materials,
they can protect even the most
unusual surfaces and parts
against hostile finishing and
manufacturing processes.
Easy to install and remove,
custom moulded masks are
reusable, durable and can
mask almost any two or three
dimensional part or aperture.
Whilst tooling costs can be
higher when compared with
other masking methods they
can eliminate multiple manual
finishing steps or dramatically
speed masking installation and
removal providing a return on
investment very quickly.
With its own in-house
compounding facility
Greentree-Shercon offers
an extensive range of materials
both organic and inorganic,
including conductive rubber
and rubber to metal bondings
to solve the most demanding
of applications.
Whether it be one-offs or
a large production run we can
engineer a solution to your
masking problem.
Tel :+44(0)1684 53380026 MISC MASKING
ULTRABAKE™ SHEETING 315°C
Part Number
Size (mm)
Length/Width Thickness
US031-36 914 x 914 0.79
US062-36 914 x 914 1.58
US093-36 914 x 914 2.36
US125-36 914 x 914 3.18
US187-36 914 x 914 4.75
US250-36 914 x 914 6.35
US375-36 914 x 914 9.53
US500-36 914 x 914 12.70
ULTRABAKE™ CORD 315°C
• Can be supplied in sheet form or custom shape
• Recommended for powder coating, e-coating, plating and anodising
• Sheeting can be used for gaskets, pads, strips, washers and seals
• Reusable
Part Number
Diameter (mm)
Coil Length(mtrs)
UC0070 1.78 30
UC0093 2.36 30
UC0103 2.62 30
UC0125 3.18 30
UC0139 3.53 30
UC0156 3.96 30
UC0187 4.75 30
UC0210 5.33 30
Part Number
Diameter (mm)
Coil Length(mtrs)
UC0250 6.35 30
UC0275 6.99 30
UC0312 7.93 30
UC0375 9.53 15
UC0437 11.10 15
UC0500 12.70 15
UC0562 14.28 15
• Recommended for powder coating, e-coating, plating and anodising
• Ideal for slots and through holes
• Flexible and reusable
• Other sizes available
ULTRABAKE™ STAR TUBING 315°C• Protects threads, one size fits several diameters
• Less surface tension to aid removal
Part Number
Colour Min/Max dia (mms)
Coil Length(mtrs)
UST-0500 RUSTY RED 12.70 - 15.88 30
UST-0750 GREEN 19.05 - 22.23 15
UST-1000 BLUE 25.40 - 30.48 15
UST-1500 RUSTY RED 38.10 - 44.45 15
MISC MASKING 27www.greentree-shercon.co.uk
ULTRABAKE™ TUBING 315°C
Part Number
Colour Thread Size
I.D. (mm) O.D. (mm) Coil Length (mtrs)
ST0040 CLEAR 1.02 4.19 30ST0062 CLEAR 1.58 4.75 30ST0080 CLEAR 2.03 5.21 30ST0093 CLEAR 2.36 5.54 30ST0109 CLEAR M3 2.77 5.94 30SRR-M3 BLUE M3 2.87 5.32 30ST0125 CLEAR 3.18 6.35 30ST0140 CLEAR 3.56 6.73 30SRR-M4 GREEN M4 3.87 6.34 30ST0156 CLEAR M4 3.96 7.14 30ST0172 CLEAR 4.37 7.54 30ST0187 CLEAR M5 4.75 7.93 30SRR-M5 CLEAR M5 4.87 7.10 30ST0203 CLEAR 5.16 8.33 30ST0218 CLEAR 5.54 8.71 30SRR-M6 BLACK M6 5.87 8.70 30ST0234 CLEAR M6 5.94 9.12 30ST0250 CLEAR 6.35 9.53 30ST0281 CLEAR 7.14 10.31 30STRR-M8 WHITE M8 7.49 10.35 30ST0312 CLEAR M8 7.93 11.10 30ST0343 CLEAR 8.71 11.89 30ST0375 CLEAR M10 9.53 12.70 30SRR-M10 BROWN M10 9.87 12.75 30ST0406 CLEAR 10.31 13.49 30ST0437 CLEAR M12 11.10 14.28 30ST0500 CLEAR 12.70 15.88 30ST0625 RUSTY RED 15.88 19.05 15ST0750 RUSTY RED 19.05 22.23 15ST0875 RUSTY RED 22.23 25.40 15ST0937 RUSTY RED 23.80 26.98 15ST1000 RUSTY RED 25.40 28.58 15ST1125 RUSTY RED 28.58 31.75 15ST1250 RUSTY RED 31.75 34.93 15ST1375 RUSTY RED 34.93 38.10 15ST1500 RUSTY RED 38.10 41.28 15ST1625 RUSTY RED 41.28 44.45 15ST1750 RUSTY RED 44.45 47.63 15ST1875 RUSTY RED 47.63 50.80 15ST2000 RUSTY RED 50.80 53.98 15
CUT SLEEVES 260°C
• Recommended for powder coating, e-coating, plating and anodising
• 1.59mm wall thickness
• Ideal for long studs pins and tubing
• Flexible and reusable
• Extremely versatile - can be cut to required length
• Available as cut sleeves (see below)
• Larger diameters available on request
• Tubing also available in lower temperatures
• Metric Sizes• Colour coded• Economical order quantities
Part Number Colour Thread Size I.D. (mm) Length (mm) Quantity per Bag
SRS-M3 BLUE M3 2.87 40 100SRS-M4 GREEN M4 3.87 40 100SRS-M5 MAUVE M5 4.87 40 100SRS-M6 BLACK M6 5.87 50 100SRS-M8 WHITE M8 7.49 50 100SRS-M9 YELLOW M9 8.87 50 100SRS-M10 BROWN M10 9.87 50 100
Tel :+44(0)1684 53380028 TAPES
Product Code
Backing Material
Colour Temp(°C)
Adhesive Roll Length(Metres)
AerospaceApproved
Page Description
SRT Silicone Various 315 None 11 32 Tough, resilient self-fusing/sealing tape. High temperature applications. Ideally suited for plating, anodising and powder coating.
PC198 Glass Cloth Cream 260 Silicone 33 32 High temperature, Thermal Spray, Shot blasting, Electrical insulation, Flame resistant, High tensile strength and edge tear resistant.
GPT Silicone Glass White 260 Silicone 33 Plasma spray tape. High temperature applications.
PC50 Polyimide (KAPTON) Amber 260 Silicone 33 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
22 Polyimide Amber 260 Silicone 33 30/31 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
PC11 Polyester Red 230 Silicone 66 30/31 Offers all the benefits of PC21, with a higher temp. Good for covering large areas that retain heat after bake cycle. Removes cleanly.
PC90 Polyester Blue 220 Silicone 66 30/31 Offers all the benefits of PC21, with a reduced thickness, making it ideal for curved surfaces. Removes cleanly.
PC25 Polyester Green 220 Silicone 66 30/31 Double thickness version of PC21 for improved rigidity.
PC23 Polyester Red 220 Silicone 66 30/31 Slightly thicker version of PC21 for improved rigidity.
PC21 Polyester Green 220 Silicone 66 30/31 A high temperature tape for powder coating and anodising. Removes cleanly without leaving adhesive residue.
PC30 Polyester Yellow 205 Silicone 66 30/31 A good performance polyester tape with a slightly lower temperature rating to PC21.
4331 Filmic Polyester Buff 200 Silicone 66 High short term temperature, provides good anti-flaking performance, straight edge on removal and no residue.
2595 Paper Buff 200 Silicone 66 36/37 Unique high temperature, hand tearable paper tape, non-flaking upon removal.
SAT Paper Buff 180 Silicone 66 36/37 Economical, high-temperature paper tape, which can be used as a lower temperature alternative to Polyester.
PC41 Polyester Red 180 Silicone 66 PET Polyester, ideal for plating and anodising; highly conformable.
580 Polyester Red 177 Silicone 66 Anodising tape with good chemical resistance. Also used on printed circuit boards.
8403 Polyester Green 177 Silicone 66 An alternative of fabric and polyester tape. With puncture resistance and flexibility it is suitable for insulation, anchoring or bonding motors, transformers and others.
7130 Paper Buff 170 Rubber 50 36/37 Excellent all-round performance tape, giving good curve masking and sharp paint line.
4330 Paper Buff 160 Rubber 50 36/37 Flexible, wet resistant tape, tolerates drying, give a well-defined masking line and removes cleanly.
KD11 Paper Buff 150 Rubber 55 36/37 Similar properties to 4330 but offering a wider range of sizes. Provides good conformability and will strip hot.
425 Aluminium Silver 150 Acrylic 55 33 Aluminium tape, flame resistant, heat reflective. Widely used during aircraft paint stripping.
427 Aluminium (liner) Silver 150 Acrylic 55 33 Aluminium tape on a liner. As above, ideal for die-cutting.
431 Aluminium Silver 150 Acrylic 55 33 Aluminium tape, flame resistant, thermally conductive, moisture and chemical resistant.
7120 Paper Buff 135 Rubber 50 36/37 Excellent all-round performance tape, giving good curve masking and sharp paint line, low tack.
250 Paper Buff 120 Rubber 55 36/37 Paint adhesion test tape.
GS4HTP Vinyl Green 105 Rubber 55 High temperature plating tape, ideal for electroless nickel.
420 Lead Foil (liner) Silver 105 Rubber 33 33 Conformal lead tape on a liner, good thermal properties, ideal for plating and cutting, reduces build-up.
GSN Vinyl Yellow 100 None 150 A non adhesive variant of GSA with extreme conformability. Self adhering capabilities gives a leak proof seal.
GSA Vinyl Yellow 100 Hycar-Nitrile 20 Designed specifically for plating, electroless nickel, anodising and abrasive blasting. Highly flexible/conformable.
2321 Paper Buff 80 Rubber 50 36/37 General purpose tape for wet paint masking, marking and bundling.
484 Vinyl Yellow / Brown 77 Rubber 33 Conformable and abrasion resistant vinyl tape for masking during electroplating and anodising.
470 Vinyl Tan 77 Rubber 33 Good chemical resistance during plating. Conformable, resistant to electroplating and blasting.
471 Vinyl Various 75 Rubber 33 Ideal for masking during nickel, gold and copper plating.
2214 Paper Buff 60 Rubber 50 36/37 General purpose tape for wet paint masking, marking and bundling.
TAPE SELECTOR GUIDE
TAPES 29www.greentree-shercon.co.uk
Product Code
Backing Material
Colour Temp(°C)
Adhesive Roll Length(Metres)
AerospaceApproved
Page Description
SRT Silicone Various 315 None 11 32 Tough, resilient self-fusing/sealing tape. High temperature applications. Ideally suited for plating, anodising and powder coating.
PC198 Glass Cloth Cream 260 Silicone 33 32 High temperature, Thermal Spray, Shot blasting, Electrical insulation, Flame resistant, High tensile strength and edge tear resistant.
GPT Silicone Glass White 260 Silicone 33 Plasma spray tape. High temperature applications.
PC50 Polyimide (KAPTON) Amber 260 Silicone 33 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
22 Polyimide Amber 260 Silicone 33 30/31 High temperature applications. Suitable for electrical & thermal insulation and PCB wave soldering applications.
PC11 Polyester Red 230 Silicone 66 30/31 Offers all the benefits of PC21, with a higher temp. Good for covering large areas that retain heat after bake cycle. Removes cleanly.
PC90 Polyester Blue 220 Silicone 66 30/31 Offers all the benefits of PC21, with a reduced thickness, making it ideal for curved surfaces. Removes cleanly.
PC25 Polyester Green 220 Silicone 66 30/31 Double thickness version of PC21 for improved rigidity.
PC23 Polyester Red 220 Silicone 66 30/31 Slightly thicker version of PC21 for improved rigidity.
PC21 Polyester Green 220 Silicone 66 30/31 A high temperature tape for powder coating and anodising. Removes cleanly without leaving adhesive residue.
PC30 Polyester Yellow 205 Silicone 66 30/31 A good performance polyester tape with a slightly lower temperature rating to PC21.
4331 Filmic Polyester Buff 200 Silicone 66 High short term temperature, provides good anti-flaking performance, straight edge on removal and no residue.
2595 Paper Buff 200 Silicone 66 36/37 Unique high temperature, hand tearable paper tape, non-flaking upon removal.
SAT Paper Buff 180 Silicone 66 36/37 Economical, high-temperature paper tape, which can be used as a lower temperature alternative to Polyester.
PC41 Polyester Red 180 Silicone 66 PET Polyester, ideal for plating and anodising; highly conformable.
580 Polyester Red 177 Silicone 66 Anodising tape with good chemical resistance. Also used on printed circuit boards.
8403 Polyester Green 177 Silicone 66 An alternative of fabric and polyester tape. With puncture resistance and flexibility it is suitable for insulation, anchoring or bonding motors, transformers and others.
7130 Paper Buff 170 Rubber 50 36/37 Excellent all-round performance tape, giving good curve masking and sharp paint line.
4330 Paper Buff 160 Rubber 50 36/37 Flexible, wet resistant tape, tolerates drying, give a well-defined masking line and removes cleanly.
KD11 Paper Buff 150 Rubber 55 36/37 Similar properties to 4330 but offering a wider range of sizes. Provides good conformability and will strip hot.
425 Aluminium Silver 150 Acrylic 55 33 Aluminium tape, flame resistant, heat reflective. Widely used during aircraft paint stripping.
427 Aluminium (liner) Silver 150 Acrylic 55 33 Aluminium tape on a liner. As above, ideal for die-cutting.
431 Aluminium Silver 150 Acrylic 55 33 Aluminium tape, flame resistant, thermally conductive, moisture and chemical resistant.
7120 Paper Buff 135 Rubber 50 36/37 Excellent all-round performance tape, giving good curve masking and sharp paint line, low tack.
250 Paper Buff 120 Rubber 55 36/37 Paint adhesion test tape.
GS4HTP Vinyl Green 105 Rubber 55 High temperature plating tape, ideal for electroless nickel.
420 Lead Foil (liner) Silver 105 Rubber 33 33 Conformal lead tape on a liner, good thermal properties, ideal for plating and cutting, reduces build-up.
GSN Vinyl Yellow 100 None 150 A non adhesive variant of GSA with extreme conformability. Self adhering capabilities gives a leak proof seal.
GSA Vinyl Yellow 100 Hycar-Nitrile 20 Designed specifically for plating, electroless nickel, anodising and abrasive blasting. Highly flexible/conformable.
2321 Paper Buff 80 Rubber 50 36/37 General purpose tape for wet paint masking, marking and bundling.
484 Vinyl Yellow / Brown 77 Rubber 33 Conformable and abrasion resistant vinyl tape for masking during electroplating and anodising.
470 Vinyl Tan 77 Rubber 33 Good chemical resistance during plating. Conformable, resistant to electroplating and blasting.
471 Vinyl Various 75 Rubber 33 Ideal for masking during nickel, gold and copper plating.
2214 Paper Buff 60 Rubber 50 36/37 General purpose tape for wet paint masking, marking and bundling.
TAPE SELECTOR GUIDE
Other approved specialist tapes available, please contact us for details
Tel :+44(0)1684 53380030 TAPES
HIGH TEMPERATURE TAPES
Size Roll Length (M)
PC30Part No.
PC21Part No.Metric (mm) Imperial
3.18 1/8” 66 PC30-0125 PC21-0125
5.00 66 PC30-5MM PC21-5MM
6.35 1/4” 66 PC30-0250 PC21-0250
7.93 66 PC30-0312 PC21-0312
9.53 66 PC30-0375 PC21-0375
10.00 66 PC30-10MM PC21-10MM
11.10 66 PC30-0437 PC21-0437
12.70 1/2” 66 PC30-0500 PC21-0500
15.00 66 PC30-15MM PC21-15MM
15.88 66 PC30-0625 PC21-0625
19.05 3/4” 66 PC30-0750 PC21-0750
20.00 66 PC30-20MM PC21-20MM
22.23 66 PC30-0875 PC21-0875
25.00 66 PC30-25MM PC21-25MM
25.40 1” 66 PC30-1000 PC21-1000
30.00 66 PC30-30MM PC21-30MM
31.75 1 1/4” 66 PC30-1250 PC21-1250
35.00 66 PC30-35MM PC21-35MM
38.10 1 1/2” 66 PC30-1500 PC21-1500
40.00 66 PC30-40MM PC21-40MM
45.00 66 PC30-45MM PC21-45MM
50.00 66 PC30-50MM PC21-50MM
50.80 2” 66 PC30-2000 PC21-2000
63.50 2 1/2” 66 PC30-2500 PC21-2500
76.20 3” 66 PC30-3000 PC21-3000
80.00 66 PC30-80MM PC21-80MM
88.90 3 1/2” 66 PC30-3500 PC21-3500
100.00 66 PC30-100MM PC21-100MM
101.60 4” 66 PC30-4000 PC21-4000
114.30 4 1/2” 66 PC30-4500 PC21-4500
127.00 5” 66 PC30-5000 PC21-5000
139.70 5 1/2” 66 PC30-5500 PC21-5500
150.00 66 PC30-150MM PC21-150MM
152.40 6” 66 PC30-6000 PC21-6000
177.80 7” 66 PC30-7000 PC21-7000
203.20 8” 66 PC30-8000 PC21-8000
205ºC 220ºC
Greentree-Shercon supply a broad range of masking and associated tapes for varied applications. The tapes come in a variety of widths and many can be supplied in standard shapes such as discs or squares
APPLICATIONTapes should be applied to clean surfaces, firmly pressing into place to ensure good overall adhesion. Removal should be as soon as possible to leave a residue free surface.
STORAGEAlways rotate stock. Do not crush. Storage temperature 13ºC-30ºCFull technical information and MSDS available. REACH compliant.
PC30 - YELLOW - 205ºC• For lower temperatures and short oven time •Recommended for powder coating, e-coating and anodising.• Material Polyester• Adhesive Silicone• Specialist widths available• Die cuts available• Aerospace approved
TAPES 31www.greentree-shercon.co.uk
Size Roll Length (M)
PC30Part No.
PC21Part No.Metric (mm) Imperial
3.18 1/8” 66 PC30-0125 PC21-0125
5.00 66 PC30-5MM PC21-5MM
6.35 1/4” 66 PC30-0250 PC21-0250
7.93 66 PC30-0312 PC21-0312
9.53 66 PC30-0375 PC21-0375
10.00 66 PC30-10MM PC21-10MM
11.10 66 PC30-0437 PC21-0437
12.70 1/2” 66 PC30-0500 PC21-0500
15.00 66 PC30-15MM PC21-15MM
15.88 66 PC30-0625 PC21-0625
19.05 3/4” 66 PC30-0750 PC21-0750
20.00 66 PC30-20MM PC21-20MM
22.23 66 PC30-0875 PC21-0875
25.00 66 PC30-25MM PC21-25MM
25.40 1” 66 PC30-1000 PC21-1000
30.00 66 PC30-30MM PC21-30MM
31.75 1 1/4” 66 PC30-1250 PC21-1250
35.00 66 PC30-35MM PC21-35MM
38.10 1 1/2” 66 PC30-1500 PC21-1500
40.00 66 PC30-40MM PC21-40MM
45.00 66 PC30-45MM PC21-45MM
50.00 66 PC30-50MM PC21-50MM
50.80 2” 66 PC30-2000 PC21-2000
63.50 2 1/2” 66 PC30-2500 PC21-2500
76.20 3” 66 PC30-3000 PC21-3000
80.00 66 PC30-80MM PC21-80MM
88.90 3 1/2” 66 PC30-3500 PC21-3500
100.00 66 PC30-100MM PC21-100MM
101.60 4” 66 PC30-4000 PC21-4000
114.30 4 1/2” 66 PC30-4500 PC21-4500
127.00 5” 66 PC30-5000 PC21-5000
139.70 5 1/2” 66 PC30-5500 PC21-5500
150.00 66 PC30-150MM PC21-150MM
152.40 6” 66 PC30-6000 PC21-6000
177.80 7” 66 PC30-7000 PC21-7000
203.20 8” 66 PC30-8000 PC21-8000
PC90Part No.
PC11Part No.
PC90-0125 PC11-0125
PC90-5MM PC11-5MM
PC90-0250 PC11-0250
PC90-0312 PC11-0312
PC90-0375 PC11-0375
PC90-10MM PC11-10MM
PC90-0437 PC11-0437
PC90-0500 PC11-0500
PC90-15MM PC11-15MM
PC90-0625 PC11-0625
PC90-0750 PC11- 0750
PC90-20MM PC11-20MM
PC90-0875 PC11-0875
PC90-25MM PC11-25MM
PC90-1000 PC11-1000
PC90-30MM PC11-30MM
PC90-1250 PC11-1250
PC90-35MM PC11-35MM
PC90-1500 PC11-1500
PC90-40MM PC11-40MM
PC90-45MM PC11-45MM
PC90-50MM PC11-50MM
PC90-2000 PC11-2000
PC90-2500 PC11-2500
PC90-3000 PC11-3000
PC90-80MM PC11-80MM
PC90-3500 PC11-3500
PC90-100MM PC11-100MM
PC90-4000 PC11-4000
PC90-4500 PC11-4500
PC90-5000 PC11-5000
PC90-5500 PC11-5500
PC90-150MM PC11-150MM
PC90-6000 PC11-6000
PC90-7000 PC11-7000
PC90-8000 PC11-8000
HIGH TEMPERATURE TAPES
Roll Length (M)
# 22Part No.
33 22-0125
33 22-5MM
33 22-0250
33 22-0312
33 22-0375
33 22-10MM
33 22-0437
33 22-0500
33 22-15MM
33 22-0625
33 22-0750
33 22-20MM
33 22-0875
33 22-25MM
33 22-1000
33 22-30MM
33 22-1250
33 22-35MM
33 22-1500
33 22-40MM
33 22-45MM
33 22-50MM
33 22-2000
33 22-2500
33 22-3000
33 22-80MM
33 22-3500
33 22-100MM
33 22-4000
33 22-4500
33 22-5000
33 22-5500
33 22-150MM
33 22-6000
33 22-7000
33 22-8000
220ºC 230ºC 260ºCPC21 - GREEN - 220ºC•Our most popular brand used throughout the industry.•Now available in three thicknesses (PC21,PC23 and PC25) for applications requiring a thicker coating allowing for greater ease of tape removal.•Recommended for powder coating, e-coating and anodising•Material Polyester•Adhesive Silicone• Aerospace approved
PC90 - BLUE - 220ºC•A tape similar to PC21 but half the thickness making it ideal for curved and conformed surfaces and profiles.•Recommended for powder coating, e-coating and anodising.•Material Polyester•Adhesive Silicone• Aerospace approved
PC11 - RED - 230ºC•A higher temperature tape where longer curing times are required. •Recommended for powder coating, e-coating and anodising.•Material Polyester•Adhesive Silicone• Aerospace approved
#22 - AMBER - 260ºC•A very high temperature tape offering excellent electrical and thermal insulation for applications requiring long cure times. •Recommended for electrical insulation, wave soldering and masking of circuit boards.•Material Polyimide•Adhesive Silicone• Aerospace approved
• Recommended for thermal spray, high-temp powder coating and shot blasting
• Available in custom widths or as die-cuts
• Good resistance to solvents and abrasion
• Flame retardant
• High tensile strength
• See page 41 for Discs
• No minimum order quantity
Tel :+44(0)1684 53380032 TAPES
GLASS CLOTH TAPE 260°C
Part Number
Width(mm)
Imperial Size
Rolls Length(mtrs)
PC198-0125 3.18 1/8” 33
PC198-0250 6.35 1/4” 33
PC198-0375 9.53 3/8” 33
PC198-0500 12.70 1/2” 33
PC198-0625 15.88 5/8” 33
PC198-0750 19.05 3/4” 33
PC198-1000 25.40 1” 33
PC198-1250 31.75 1 1/4” 33
PC198-1500 38.10 1 1/2” 33
PC198-2000 50.80 2” 33
PC198-2500 63.50 2 1/2” 33
PC198-3000 76.20 3” 33
PC198-4000 101.60 4” 33
PC198-6000 152.40 6” 33
SILICONE RUBBER TAPE 315°C
Part Number
Colour Width(mm)
Thickness(mm)
Length(mtrs)
SRT0750-20 BLACK 19.05 0.51 11SRT1000-20 GREY 25.40 0.51 11SRT1000-30 ORANGE 25.40 0.76 11SRT1500-20 RED 38.10 0.51 11SRT1500-30 BLUE 38.10 0.76 11SRT1750-20 GREEN 44.45 0.51 11SRT2000-20 YELLOW 50.80 0.51 11SRT2000-30 WHITE 50.80 0.76 11SRT0753-10R RED 19.05 0.25 16.5SRT0753-20R BLUE 19.05 0.51 11
Other sizes available on request including metric widths.
For more specialist thermal and plasma applications
we offer a range of high performance tapes in different
widths and as custom die-cuts.
• A tough, resilient, self fusing and adhering tape
• For covering irregular shaped objects
• Provides a void free insulation
• Recommended for powder coating, e-coating, plating and anodising
• Range of sizes, thicknesses and colours
• No adhesive
• Waterproof
• Aerospace approved
TAPES 33www.greentree-shercon.co.uk
• Excellent adhesion
• Recommended as a mask during electroplating and anodising
• Provides moisture and radiation barrier in certain applications
• Good conformability having electrically and thermally conductive properties.
• Available in disc or die-cut form
• Solvent resistant
• Aerospace approved
Part Number Size Total Tape Thickness
(mm)
Roll Length (mtrs)Metric (mm) Imperial
431-12MM 12 0.08 55
431-25MM 25 0.08 55
425-1000 25.40 1” 0.12 55
431-50MM 50 0.08 55
425-50MM 50 2” 0.12 55
LEAD FOIL TAPE 105°C
Part Number Size Roll Length (mtrs)Metric (mm) Imperial
9GRE003454 2.00 x 500 100 pcs
9GRE003457 3.00 33
420-0125 3.17 1/8” 33
420-4MM 4.00 33
420-0250 6.35 1/4” 33
420-0312 7.93 5/16” 33
9GRE0034546 9.00 33
420-0375 9.53 3/8” 33
420-0500 12.70 1/2” 33
420-1000 25.40 1” 33
420-1250 31.75 1 1/4” 33
420-1500 38.10 1 1/2” 33
420-2000 50.80 2” 33
420-2500 63.50 2 1/2” 33
420-3000 76.20 3” 33
420-3500 88.90 3 1/2” 33
420-4000 101.60 4” 33
420-4500 114.30 4 1/2” 33
420-5000 127.00 5” 33
420-5500 139.70 5 1/2” 33
420-6000 152.40 6” 33
ALUMINIUM FOIL TAPES 149°C
• Superior bond (acrylic adhesive)• High thermal conductivity to maximise efficiency of heating or cooling• Moisture and solvent resistant• Flame resistant• Available on a liner• Available as discs or die-cut • Aerospace approved
Tel :+44(0)1684 53380034 MASKING DIE-CUTS
POLYESTER DONUTS 220°C
Part Number
I.D. (mm)
O.D.(mm)
QuantityPer Roll
PCD125x312 3.18 7.93 1000PCD125x500 3.18 12.70 1000PCD156x375 3.96 9.53 1000PCD187x500 4.75 12.70 1000PCD250x500 6.35 12.70 1000PCD250x562 6.35 14.28 1000PCD250x750 6.35 19.05 1000PCD281x625 7.14 15.88 1000PCD375x875 9.53 22.23 1000PCD406x812 10.31 20.63 1000PCD500x1250 12.70 31.75 500PCD562x1375 14.28 34.93 500
POLYESTER SQUARES 220°C
Part Number
Length(mm)
Width(mm)
QuantityPer Roll
PC0250SQ 6.35 6.35 1000PC0375SQ 9.53 9.53 1000PC0500SQ 12.70 12.70 1000PC0625SQ 15.88 15.88 1000PC0750SQ 19.05 19.05 1000PC01000SQ 25.40 25.40 500PC01500SQ 38.10 38.10 500PC02000SQ 50.80 50.80 250
POLYESTER RECTANGLES 220°C
Part Number
Length(mm)
Width(mm)
QuantityPer Roll
PC250x500RT 6.35 12.70 1000PC250x750RT 6.35 19.05 1000PC250x1000RT 6.35 25.40 1000PC500x750RT 12.70 19.05 1000PC500x1000RT 12.70 25.40 1000PC750x1000RT 19.05 25.40 500
CALL TODAY FOR A QUOTE ON YOUR CUSTOM DIE-CUT SHAPE
• PC21, other materials and custom sizes available up to 260˚C
• No tooling cost
• No minimum order quantity
• PC21, other materials and custom sizes available up to 260˚C
• No tooling cost
• No minimum order quantity
• PC21, other materials and custom sizes available up to 260˚C
• No tooling cost
• No minimum order quantity
CUSTOM DIE-CUTS 35www.greentree-shercon.co.uk
CUSTOM DIE-CUTS
Greentree-Shercon custom die-cuts are
extremely effective when masking
a flat or curved surface. They are easy to
apply and remove leaving a clean surface
with no residue. Custom shapes can be
produced to meet your application in a wide
range of materials including polyester, crepe
paper, lead and aluminium foil, glass fibre,
magnetic strip, and rubber sheeting offering
temperatures up to 260°C.
They can be supplied with tabs to aid
removal, in kit form or individually on a
transfer liner. And should you require only
one shape to a large production run that
is no problem.
Die cut shapes can speed up the masking
operation eliminating the need and potential
dangers of sharp knives on the production
line whist product quality is improved with a
shape that gives constant accuracy time
after time.
With no tooling costs Greentree-Shercon will
provide you with samples within 24 hours and
once approved, full production run within a
few days.
Call our Sales Team now on
01684 533 800 or e-mail us at
for more information or a visit.
• Improve productivity
• Effective masking on
a flat or curved surface
• Wide range
of materials
• Consistent
product finish
• Effective product
quality check • No tooling costs • No minimum order quantity
Tel :+44(0)1684 53380036 TAPES
PAPER TAPES
Width (mm)
Width (Imperial)
2214Part No.
2321Part No.
250Part No.
7120Part No.
KD11Part No.
4330Part No.
7130Part No.
SATPart No.
2595Part No.
5.00 KD11-5MM
6.35 1/4" KD11-0250
6.00 2595-6MM-H
9.53 3/8" KD11-0375
10.00 KD11-10MM GTE4330-10MM
12.00 2214-12MM GTE4330-12MM 7130-12MM 2595-12MM-H
12.70 1/2" KD11-0500 SAT-0500
15.00 KD11-15MM
19.05 3/4" KD11-0750 SAT-0750
20.00 KD11-20MM
24.00 7120-24MM 7130-24MM
25.00 2214-25MM 2321-25MM KD11-25MM GTE4330-25MM 2595-25MM-H
25.40 1" 250-1000 KD11-1000 SAT-1000
30.00 KD11-30MM
38.00 2214-38MM 2321-38MM
38.10 1 1/2" KD11-1500
40.00 KD11-40MM
45.00 KD11-45MM
48.00 7120-48MM 7130-48MM
50.00 2214-50MM 2321-50MM KD11-50MM GTE4330-50MM 2595-50MM-H
50.80 2" KD11-2000 SAT-2000
72.00 7120-72MM
75.00 2214-75MM
76.20 3" KD11-3000
80.00 KD11-80MM
100.00 KD11-100MM
101.60 4" KD11-4000
150.00 KD11-150MM
152.40 6" KD11-6000
60ºC 80ºC 120ºC 135ºC
Greentree-Shercon supply a broad range of masking and associated tapes for varied applications.
These tapes are available in a variety of standard and custom widths and many can be supplied in standard die-cut shapes such as discs or squares.
APPLICATIONTapes should be applied to clean surfaces, firmly pressing into place to ensure good overall adhesion. Removal should be as soon as possible to leave a residue free surface.
STORAGEAlways rotate stock. Do not crush. Storage temperature 13°C-30°C Full technical information and MSDS available. REACH compliant.
2214 - 60°C•Generalpurposepaper masking tape for holding, bundling, sealing and non-critical masking•Rubberadhesive•Aerospaceapproved
TAPES 37www.greentree-shercon.co.uk
PAPER TAPES
Width (mm)
Width (Imperial)
2214Part No.
2321Part No.
250Part No.
7120Part No.
KD11Part No.
4330Part No.
7130Part No.
SATPart No.
2595Part No.
5.00 KD11-5MM
6.35 1/4" KD11-0250
6.00 2595-6MM-H
9.53 3/8" KD11-0375
10.00 KD11-10MM GTE4330-10MM
12.00 2214-12MM GTE4330-12MM 7130-12MM 2595-12MM-H
12.70 1/2" KD11-0500 SAT-0500
15.00 KD11-15MM
19.05 3/4" KD11-0750 SAT-0750
20.00 KD11-20MM
24.00 7120-24MM 7130-24MM
25.00 2214-25MM 2321-25MM KD11-25MM GTE4330-25MM 2595-25MM-H
25.40 1" 250-1000 KD11-1000 SAT-1000
30.00 KD11-30MM
38.00 2214-38MM 2321-38MM
38.10 1 1/2" KD11-1500
40.00 KD11-40MM
45.00 KD11-45MM
48.00 7120-48MM 7130-48MM
50.00 2214-50MM 2321-50MM KD11-50MM GTE4330-50MM 2595-50MM-H
50.80 2" KD11-2000 SAT-2000
72.00 7120-72MM
75.00 2214-75MM
76.20 3" KD11-3000
80.00 KD11-80MM
100.00 KD11-100MM
101.60 4" KD11-4000
150.00 KD11-150MM
152.40 6" KD11-6000
150ºC 160ºC 170ºC 180ºC 200ºC2321 - 80°C•Generalpurposepapermasking tape for short term paint masking, paper aproning and fixing, bundling, holding and sealing•Rubberresinadhesive•Aerospaceapproved
250 - 120°C•Generalpurposepapertape for applications where a stronger backing is required•Rubberadhesive•Aerospaceapproved
7120 - 135°C•Papertapeforapplications on sensitive materials which require a low tack tape•Rubberresinadhesive
KD11- 150°C•Ahightemperature,pressure sensitive paper masking tape designed for clean removal.•Acrylicadhesive•Aerospaceapproved•Die-cutsavailable•Availableincustomwidths
4330 - 160°C•Afinelycreped,flexible,wet resistant masking tape with a high tensile strength•Naturalrubberadhesive•Aerospaceapproved
7130 - 170°C•Ahightemperaturepaper tape designed to withstand single or repeat bake cycles at temperatures up to 170°C•Rubberresinadhesive
SAT- 180°C•Ahightemperaturepapertape with a pressure-sensitive adhesive•Naturalrubberadhesive
2595 - 200°C•Ahightemperaturesemicrepe paper tape ideal for use in paint stoving cycles•Siliconeadhesive•Die-cutsavailable
• Recommended for powder coating, e-coating and anodising
• Clean removal with no adhesive residue
• Custom sizes available - call for pricing
• Imperial and metric sizes available
• Any size cut to your requirement
• No tooling charges
• No minimum order quantity
• Also available as roll tape (Page 30/31)
• P denotes concentric rings for ease of alignment
• Available with tab to aid removal
• Resistant to chemicals
Tel :+44(0)1684 53380038 DISCS
HIGH TEMPERATURE DISCS
Size Discs Per Roll
PC21Part No.Metric (mm)
3.00 2000 PC003MM
4.00 2000 PC004MM
5.00 2000 PC005MM
6.00 2000 PC006MM-P
7.00 2000 PC007MM-P
8.00 2000 PC008MM-P
9.00 2000 PC009MM
10.00 2000 PC010MM
11.00 2000 PC011MM
12.00 2000 PC012MM-P
13.00 2000 PC013MM
14.00 2000 PC014MM-P
15.00 2000 PC015MM-P
16.00 2000 PC016MM-P
17.00 1000 PC017MM
18.00 1000 PC018MM-P
19.00 1000 PC019MM-P
20.00 1000 PC020MM-P
21.00 1000 PC021MM
22.00 500 PC022MM-P
23.00 500 PC023MM-P
24.00 500 PC024MM
25.00 500 PC025MM-P
30.00 500 PC030MM-P
32.00 250 PC032MM-P
35.00 250 PC035MM
36.00 250 PC036MM-P
38.10 250 PC01500-P
40.00 250 PC040MM
45.00 250 PC045MM
50.00 250 PC050MM-P
55.00 250 PC055MM
57.15 250 PC02250-P
60.00 250 PC060MM
63.50 250 PC02500-P
65.00 250 PC065MM
70.00 250 PC070MM
75.00 100 PC075MM
80.00 100 PC080MM
85.00 100 PC085MM
90.00 100 PC090MM
95.00 100 PC095MM
100.00 100 PC100MM
110.00 100 PC110MM
120.00 100 PC120MM
130.00 100 PC130MM
140.00 100 PC140MM
150.00 100 PC150MM
220ºC
DISCS 39www.greentree-shercon.co.uk
Size Discs Per Roll
PC21Part No.Metric (mm)
3.00 2000 PC003MM
4.00 2000 PC004MM
5.00 2000 PC005MM
6.00 2000 PC006MM-P
7.00 2000 PC007MM-P
8.00 2000 PC008MM-P
9.00 2000 PC009MM
10.00 2000 PC010MM
11.00 2000 PC011MM
12.00 2000 PC012MM-P
13.00 2000 PC013MM
14.00 2000 PC014MM-P
15.00 2000 PC015MM-P
16.00 2000 PC016MM-P
17.00 1000 PC017MM
18.00 1000 PC018MM-P
19.00 1000 PC019MM-P
20.00 1000 PC020MM-P
21.00 1000 PC021MM
22.00 500 PC022MM-P
23.00 500 PC023MM-P
24.00 500 PC024MM
25.00 500 PC025MM-P
30.00 500 PC030MM-P
32.00 250 PC032MM-P
35.00 250 PC035MM
36.00 250 PC036MM-P
38.10 250 PC01500-P
40.00 250 PC040MM
45.00 250 PC045MM
50.00 250 PC050MM-P
55.00 250 PC055MM
57.15 250 PC02250-P
60.00 250 PC060MM
63.50 250 PC02500-P
65.00 250 PC065MM
70.00 250 PC070MM
75.00 100 PC075MM
80.00 100 PC080MM
85.00 100 PC085MM
90.00 100 PC090MM
95.00 100 PC095MM
100.00 100 PC100MM
110.00 100 PC110MM
120.00 100 PC120MM
130.00 100 PC130MM
140.00 100 PC140MM
150.00 100 PC150MM
PC90Part No.
PC11Part No.
Polyimide Part No.
PB003MM PR003MM KP003MM
PB004MM PR004MM KP004MM
PB005MM PR005MM KP005MM
PB006MM PR006MM KP006MM
PB007MM PR007MM KP007MM
PB008MM PR008MM KP008MM
PB009MM PR009MM KP009MM
PB010MM PR010MM KP010MM
PB011MM PR011MM KP011MM
PB012MM PR012MM KP012MM
PB013MM PR013MM KP013MM
PB014MM PR014MM KP014MM
PB015MM PR015MM KP015MM
PB016MM PR016MM KP016MM
PB017MM PR017MM KP017MM
PB018MM PR018MM KP018MM
PB019MM PR019MM KP019MM
PB020MM PR020MM KP020MM
PB021MM PR021MM KP021MM
PB022MM PR022MM KP022MM
PB023MM PR023MM KP023MM
PB024MM PR024MM KP024MM
PB025MM PR025MM KP025MM
PB030MM PR030MM KP030MM
PB032MM PR032MM KP032MM
PB035MM PR035MM KP035MM
PB036MM PR036MM KP036MM
PB01500 PR01500 KP01500
PB040MM PR040MM KP040MM
PB045MM PR045MM KP045MM
PB050MM PR050MM KP050MM
PB055MM PR055MM KP055MM
PB02250 PR02250 KP02250
PB060MM PR060MM KP060MM
PB02500 PR02500 KP02500
PB065MM PR065MM KP065MM
PB070MM PR070MM KP070MM
PB075MM PR075MM KP075MM
PB080MM PR080MM KP080MM
PB085MM PR085MM KP085MM
PB090MM PR090MM KP090MM
PB095MM PR095MM KP095MM
PB100MM PR100MM KP100MM
PB110MM PR110MM KP110MM
PB120MM PR120MM KP120MM
PB130MM PR130MM KP130MM
PB140MM PR140MM KP140MM
PB150MM PR150MM KP150MM
HIGH TEMPERATURE DISCS
220ºC 230ºC 260ºC
This is just a selection of the sizes of standard discs available from stock. We can cut any diameter you require with no tooling costs. Please see page 33/34 for other shapes available.
• High quality, high heat resistance
• Wide variety of applications
• Clean removal (no residue)
• Metric and imperial sizes available
• Aerospace approved
• Also available as roll tape (Page 36/37)
• Available as custom die-cut shapes
Tel :+44(0)1684 53380040 DISCS
KWIKY DOT™DISCS 149°C
Part Number Size(mm)
QuantityPer Roll
KD003MM 3.0 5000
KD004MM 4.0 5000
KD005MM 5.0 5000
KD006MM 6.0 5000
KD007MM 7.0 5000
KD008MM 8.0 5000
KD009MM 9.0 5000
KD010MM 10.0 5000
KD011MM 11.0 5000
KD012MM 12.0 5000
KD013MM 13.0 5000
KD014MM 14.0 5000
KD015MM 15.0 5000
KD016MM 16.0 5000
KD017MM 17.0 5000
KD018MM 18.0 5000
KD019MM 19.0 5000
KD020MM 20.0 5000
KD021MM 21.0 5000
KD022MM 22.0 2000
KD023MM 23.0 2000
KD024MM 24.0 2000
KD025MM 25.0 2000
KD030MM 30.0 2000
KD035MM 35.0 2000
KD040MM 40.0 2000
KD045MM 45.0 2000
KD050MM 50.0 500
KD055MM 55.0 500
KD060MM 60.0 500
KD065MM 65.0 500
KD070MM 70.0 500
KD075MM 75.0 500
KD080MM 80.0 500
KD085MM 85.0 500
KD090MM 90.0 500
KD095MM 95.0 500
KD0100MM 100.0 250
KD0110MM 110.0 250
KD0120MM 120.0 250
KD0130MM 130.0 250
KD0140MM 140.0 250
KD0150MM 150.0 250
DISCS 41www.greentree-shercon.co.uk
• Recommended for thermal spray, high-temp powder coating and shot blasting
• Resistant to high-pressure blasting
• Excellent resistance to solvents and abrasion
• Flame retardant
• High tensile strength
• Metric and imperial sizes available
• Also available as roll tape (page 32)
• Available as custom die-cut shapes
GLASS CLOTH DISCS 260°C
Part Number Size(mm)
QuantityPer Roll
GC003MM 3.0 2000
GC004MM 4.0 2000
GC005MM 5.0 2000
GC006MM 6.0 2000
GC007MM 7.0 2000
GC008MM 8.0 2000
GC009MM 9.0 2000
GC010MM 10.0 2000
GC011MM 11.0 2000
GC012MM 12.0 2000
GC013MM 13.0 2000
GC014MM 14.0 2000
GC015MM 15.0 2000
GC016MM 16.0 2000
GC017MM 17.0 1000
GC018MM 18.0 1000
GC019MM 19.0 1000
GC020MM 20.0 1000
GC021MM 21.0 1000
GC022MM 22.0 500
GC023MM 23.0 500
GC024MM 24.0 500
GC025MM 25.0 500
GC030MM 30.0 500
GC035MM 35.0 250
GC040MM 40.0 250
GC045MM 45.0 250
GC050MM 50.0 250
For more specialist thermal and plasma applications we offer a
range of high performance tapes in different formats.
Aerospace approved, they are available in different widths and as
custom die cuts.
Tel :+44(0)1684 53380042 KWIKY MASK
KWIKY-MASKLIQUID MASKANT
Kwiky Mask liquid maskant is an air drying, peelable,
temporary coating that has been specifically designed for
use within the engineering sector. It is predominantly used when
chemically treating metals using processes such as; anodising,
plating, etching and chemical cutting.
The liquid coating can be applied by spray, roller, brush or
immersion and dries to form a tough, resistant film against acid
and abrasion. Kwiky Mask offers excellent adhesion and can
be easily cut if required to provide a clean, leak free edge.
After use the maskant can be simply peeled away from the
substrate, condensed into a small ball and disposed of
quickly, safely and easily.
COMPOUND
Kwiky Mask Liquid Maskant
APPEARANCE
Red Liquid
APPLICATION
Immersion, roller, brush or spray
TEMPERATURE
Up to 90ºC
DRYING TIME
5 mins between applications
FILM THICKNESS
Recommended dry film
thickness is 200-250 microns,
usually achieved with 3
applications
COVERAGE
12m²/ litre at 25 microns
AVAILABILITY
5kg drum
HOOKS 43www.greentree-shercon.co.uk
HOOKS
Greentree-Shercon manufacture anextensive range of standard off-the-shelf hooks for next day delivery.
If you have a particular application requiring a special design call our sales engineering team on 01684 533800 or e-mail: [email protected]
V-HOOK
C-HOOK
CV-HOOK
S-HOOK
SPIN HOOKS
MINI HOOK
SPRING HOOKS
Tel :+44(0)1684 53380044 HOOKS
HOOK LOAD CHART
6.0
4.0
3.0
2.0
1.5
1.2
Wire
Dia
me
ter (
mm
) 100kg
74.7kg
24.4kg
8.3kg
4.4kg
1.8kg
HOOK LOAD CHART: V-HOOKS
6.0
4.0
3.0
2.0
1.5
1.2
Wire
Dia
me
ter (
mm
)
HOOK LOAD CHART: C-,S-,CV HOOKS
65.8kg
26.7kg
12.7kg
7.3kg
3.1kg
1.2kg
This load data was compiled under static load conditions in a laboratory and is given for reference only. The actual dynamic load capacity will vary. It is the Customer’s responsibility to determine whether the actual dynamic load capacity is suitable for their purpose.
V-HOOKS, S-HOOKS, C-HOOKS AND CV-HOOKS
STANDARD HOOKS
Length(mm)
Wire Diameter(mm)
QuantityPer Box
50 All are Available as:
1.2
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10.0
1000
75 1000
100 1000
150 1000
200 1000
250 1000
300 1000
350 1000
400 1000
450 1000
500 1000
550 1000
600 500
700 500
800 500
900 500
1000 500
HOOKS 45www.greentree-shercon.co.uk
V-HOOKS, S-HOOKS, C-HOOKS AND CV-HOOKS
• Manufactured from copper coated wire, mild, or sprung steel
• Plain, 90º, or S Hook
• Custom designs available
• Manufactured in the UK
• Large stocks available for immediate delivery
• No delivery surcharge
SPIN HOOKS
• Low cost solution to increase powder-coating capacity
• Rotate part/rack
• Ball bearing construction
• Durable
• Load capacity 90kg
Part NumberUWC-1
Part NumberUWV-1
Tel :+44(0)1684 53380046 HOOKS
SMART BAR™
Part NumberLength Height
inches mm inches mm
SB-24 24 609.60 1.26 32.00
SB-36 36 914.40 1.26 32.00
SB-48 48 1219.20 1.26 32.00
• Can be used with the Shercon Modular Rack or with your existing paintline
• Perfect contact every time
• Hooks lock into position
• Can be used with smart hooks or standard C-Hooks
HOOKS 47www.greentree-shercon.co.uk
TUBE SPRING HOOKS
MINI HOOKS
Length(mm)
Wire Diameter(mm)
Quantity per box
55 1.5 5000
75 1.5 5000
135 1.5 5000
• Manufactured from high quality spring steel wire to BS5216
• For use when coating tubes or similar items where there is limited hanging purchase
• Leaves no mark on the surface to be coated
• Reusable, maintaining their spring integrity for many cycles, whilst giving a good firm grip on the component
• Manufactured from copper coated wire
• 12mm internal diameter ends
• Reusable
PartNumber
Wire Diameter(mm)
Length A(mm)
Width B(mm) +/- 5mm
Quantity per box
HOOK-SH1 1.00 60.00 34.00 500
HOOK-SH2 2.00 105.00 120.00 200
HOOK-SH3 3.00 110.00 125.00 200
Tel :+44(0)1684 53380048 ASSOCIATED PRODUCTS
ASSOCIATED PRODUCTS
Greentree-Shercon supply an extensive range of associated products suitable for the surface finishing industry. These include:MAGNETIC MASKING (90ºC / 240ºC)A range of different thickness magnetic sheet which can be cut to your design. Available in gloss, plain or adhesive backed. Used on its own it will withstand temperatures up to 90ºC. Used in conjunction with silicone rubber or metal sheeting it can withstand temperatures of 240ºC.
SILICONE FOAM (250ºC)Suitable for complex masking of irregular shaped holes, channels and recesses. High flexibility on tolerances of threaded and plain holes. Available as sheeting in thicknesses from 1mm to 4mm and also in cylindrical and rectangular cord format.
PROTECTION / MASKING COVERS (150ºC)Polythene or paper covers providing excellent protection, masking components during manufacture. Ideal for wet paint, pre-treatment and other spray applications where large areas or shapes require protection. Elasticated or adhesive sealed, it can also be provided with a corrosion inhibitor to protect metal components during manufacture, transport and storage.
O-RINGS (250ºC)A wide choice of O-Rings, gaskets and seals in a selection of diameters, cross sections and materials.
HEAT SHRINK (250ºC)We can provide an extensive range of heat shrink tubing which can be used for masking irregular shaped components.
STARTER KITSEach starter kit contains a useful selection of compatible products (e.g silicone plugs) in a sturdy reinforced box. Ideal for low volume work or prototypes. Can be customised.
ELECTRO PLATERS VINYL (77ºC)Good chemical resistance during plating. Conformable, removes easily. Available in either tape form or in a range of standard disc sizes or die-cut to your design. Rubber adhesive.
AEROSPACE TAPESA range of tapes used specifically in the aerospace industry and approved by leading aero-engine and main frame manufacturers worldwide.
ANODISING TAPE (77ºC)Conformable, removes cleanly. Abrasion/chemical resistant ideal for both hard and soft anodising. Available in either tape form or in a range of standard disc sizes or die-cut to your design. Rubber adhesive.
KWIKY BOOTHA white, peelable protective coating designed to protect walls, floors and working surfaces within a spray booth from over spray and contamination.
STANDARDS, QUALITY AND SERVICE
MATERIALS, QUALITY AND STANDARDSGreentree-Shercon can supply tapes and die-cut shapes from an extensive range of materials produced by some of the world’s leading manufacturers (including Shercon, 3M, Tesa). Together with our own in-house manufacturing and rubber compounding facilities we offer an extensive range of solutions to masking and protection problems. These can come in a variety of forms such as tubing, sheeting, edging strips, foils, foams, ‘O’ rings, seals and extrusions, often providing an ‘off the shelf’ alternative solution to masking or protecting problems.
ENGINEERING SOLUTIONS TEAMThey’re not just the Engineering Solutions Team. They’re your Engineering Solutions Team. A hand-picked, experienced group of mechanical, industrial and chemical engineers, who have created innovative, cost-effective solutions to problems for almost every imaginable industry.
CUSTOM MOULD PROCESSOur custom mould process ensures you will receive a quality engineered solution.
ConceptCustom moulded masks require custom tooling - but not until our design engineers have evaluated the problem and presented a clear, creative solution for your evaluation.
Rapid PrototypeAt the concept stage, we can supply a rapid prototype so you can evaluate the proposed solution. These rapid prototypes can be generated in days.
Drawing ApprovalOnce you are happy with the custom mould design, we will provide an Engineering drawing before we manufacture any tooling. The drawing will detail the standards and tolerances we will be working to for your custom mould.
First ArticlesThe next step is for us to provide you with first article pieces of your custom mould. These can be tested right on your production line.
ProductionWhen you approve the first articles, we move into production. In our state-of-the-art facility, we custom-mix every mask compound from our extensive recipe database, and mould masks to the highest quality standards in the industry.
Greentree-Shercon’s custom moulds save time and money!
STANDARDS, QUALITY AND SERVICE 49www.greentree-shercon.co.uk
ORDER POLICIESFulfilment / Order Processing Procedures.
Upon receipt, we will promptly acknowledge your order
via fax or via e-mail. It will show which products you
purchased, your total cost and shipping details. If you
don’t receive your confirmation, you may enquire by
e-mail at [email protected]
PAYMENT TERMS• Visa / Mastercard
• Net 28th day of month following invoice date
• Bacs
RETURN / REFUND POLICY1. You may return defective products for replacement.
A credit will be issued after our Quality Control
approves the return.
2. All orders must be returned within 30 days from
the date of the invoice.
3. NO ORDERS will be accepted without written
agreement from Greentree-Shercon.
4. A 10% restocking fee may apply for items returned
that are not defective. The fee also applies if you
order the wrong parts. All items must be in original
packaging and show no signs of use.
All product descriptions and illustrations contained in this brochure are for
guidance only and it is recommended that buyers should evaluate the
products to ensure they meet their needs before purchase. If in doubt
please ask for technical assistance. Ultrabake, Kwiky Dot and Smart Bar are
Trade Marks of Shercon Inc.
Greentree-SherconSigma Close, Shannon Way,Tewkesbury, Glos GL20 8ND
Telephone: +44 (0)1684 533800Fax: +44 (0)1684 297005
Greentree is the Registered Trademark of Verton Limited
Verton Limited Registered in England: 3106156
Registered Office: Sigma Close, Shannon Way, Tewkesbury, Glos GL20 8ND
Design & Artwork by Qwertyop.co.uk
With thanks to Tom Rawlinson for photography & proof reading