This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
■ ■ ■ ■ ■ Axles on 1 1/2 in., 3 in. or 4 in. Centers
WHEELS HIGH WHEELS LOW
Note: Frame capacities shown are for 2 1/2 in. deep frames only.
Standard Specifications:Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steel or1/8 in. aluminum channel with bolt-in cross members spacedevery 2 ft. Also available - economy lite line with 14 ga. channelframes. 4 in. deep channel frames for rollers low.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. and 30 in. overall.
Couplings - Gravity hooks on one end - rod on opposite end. Allcouplings are bolted to frame. Bolt-in end couplers also available.
Lengths - 5 ft. and 10 ft. straight sections. Special lengths alsoavailable.
Wheels - 1 15/16 in. dia. - ball bearings run in hardened racewaywith lifetime lubrication. Corrosion-resistant aluminum, zinc coatedsteel, black plastic or white plastic also available.
Axles - 1/4 in. dia. threaded one end with locknut. Spaced on1 1/2 in., 3 in. or 4 in. centers. Spacers are zinc coated steel.
GRAVITYHOOK
1 9/16"
5' OR 10' OVERALL LENGTH
BOLT-IN CROSS MEMBERCOUPLING ROD
BOLT-IN CROSS MEMBER AXLE SPACER
CENTER SUPPORT BAR
1"
OVERALL FRAME WIDTH
BETWEEN FRAME WIDTH 3/8"
2 1/2"
OVERALL FRAME WIDTH
BETWEEN FRAME WIDTH
AXLE SPACER
CENTER SUPPORT BAR
BOLT-IN CROSS MEMBER
1"
1 1/8"
4"
TRAHCYTICAPACDAOL
emarFlairetaM
troppuSsretneC
yticapaCemarF yticapaCleehW
ylmrofinU.xaMdaoLdetubirtsiD
citatS.xaMleehWrePdaoL
leetS '5'01
0031053 56
munimulA '5'01
017061 05
Gravity Skatewheel Conveyor is uniquely designed toconvey lightweight packages or for use in operationsrequiring lightweight moveable sections.
Skatewheel Curves are compatible with straightsections, providing flexibility to your conveyor line.Differential action of the wheels insure properorientation of packages.
■ 6 Widths
■ 45° and 90° Curves
■ Steel or Aluminum Frames
■ Gravity Hooks and Rods on Both Ends
WHEELS LOWWHEELS HIGH
Standard Specifications:Frame -2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steelor 1/8 in. aluminum channel with bolt-in cross members. 4 in.deep channel frames for wheels low.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. or 30 in. overall.
Curves - 45° and 90°; 48 in. outside radius - 12 in., 15 in. and18 in. widths; 60 in. outside radius - 21 in., 24 in. and 30 in.widths.
Couplings - Gravity hooks and rods on both ends of curve.Bolt-in end couplers also available.
Wheels - 1 15/16 in. dia. - ball bearings run in hardened racewaywith lifetime lubrication. Corrosion-resistant aluminum, zinc coatedsteel, black plastic or white plastic also available.
Axles - 1/4 in. dia. threaded one end with locknut. Spaced on1 1/2 in. or 3 in. equivalent spacing. Spacers are zinc coated steel.
Capacity - Same “Per Foot” capacity as straight sections.
Skatewheel Spurs are used to transport productsfrom one conveying line onto another. They aresuitable for merging or diverging applications.
IF USED WITH CURVE, DIMENSION “A”SHOULD EQUAL LONGEST PACKAGE
Standard Specifications:Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steelchannel with bolt-in cross members. Aluminum frames alsoavailable.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. and 30 in. overall.
Spur Angles - 45° and 90°, right or left hand.
Couplings - Gravity hooks and rods on one end. Spur shelfangle on opposite end. Bolt-in end couplers also available.
Wheels - 1 15/16 in. dia. - ball bearings run in hardened racewaywith lifetime lubrication. Corrosion-resistant aluminum, zinc coatedsteel, black plastic or white plastic also available.
Axles - 1/4 in. dia. threaded one end with locknut. Spaced on3 in. equivalent spacing. Spacers are zinc coated steel.
Capacity - Same “Per Foot” capacity as straight sections.
Note: Model numbers in the above chart are for right hand spurs. Replace “R” with “L” for left hand spur.
*Note: Maximum product weight should not exceed 150 lbs.as product may only rest on 3 ball transfers at one time.
Ball Transfer Tables are used where productsare required to manually rotate or move in anydirection. They are compatible with 1 3/8 in. dia.and 1.9 in. dia. standard Gravity Roller Conveyorand Skatewheel Conveyor.
Model Number: _ ___ - _ - _ - _ - ___
Between Frame WidthFrame Height (2 1/2 or 3 1/2")
__BTR
LengthBall Height (1/4", 1/8" or 5/16")
Ball Spacing
SquarePattern
Standard Specifications:Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized steelchannel with bolt-in 10 ga. pans. Also available with 2 1/2 in. deepx 1 in. flange x 12 ga. galvanized steel channel frame.
Between Frame Widths - 13 through 39 in one inch incrementsfor 3 1/2 in. deep frames. 10 in., 13 in., 16 in., 19 in., 22 in. and28 in. for 2 1/2 in. deep frames.
Lengths - 2 ft. through 10 ft. in 1/2 foot increments.
End Couplers - Bolt-on type each end.
Ball Transfers - 1 in dia. ball transfers.
Spacings - Square spacings of 2 in., 4 in. and 6 in. Nominaldiagonal spacings of 3 in. and 6 in.
(S) Square Pattern
(D) Diagonal Pattern
TRAHCYTICAPACDAOL
troppuSsretneC
yticapaCemarF *yticapaCllaB
ylmrofinU.xaMdaoLdetubirtsiD
daoL.xaMllaBreP
'5 003105
'01 0021
)TOOFREPTHGIEW(SEMARFPEED.NI2/12neewteB
emarFhtdiW
.srtnC"2erauqS
.srtnC"3lanogaiD
.srtnC"4erauqS
.srtnC"6erauqS
.srtnC"6lanogaiD
013161
826233
223252
----1222
----8191
----8191
013161
833435
821383
427223
123282
123282
)TOOFREPTHGIEW(SEMARFPEED.NI2/13neewteB
emarFhtdiW
.srtnC"2erauqS
.srtnC"3lanogaiD
.srtnC"4erauqS
.srtnC"6erauqS
.srtnC"6lanogaiD
314151617181
829223335363
223242526272
021212223242
--------81910212
--------
81910212
6102122232
8393243454
8292031333
4252627282
1222223242
1222223242
4252627282
6494052535
4353637383
9203131323
5262727282
5262727282
9203132333
5565950626
9304243444
3343536373
9203031313
9203031313
435363738393
366676960727
546474940515
838393041414
233343435353
233343435353
BETWEEN FRAME WIDTH
3 1/2"
1/4"
STANDARDLENGTHSAVAILABLEIN 1/2 FT.INCREMENTS
SPACING
BETWEEN FRAME WIDTH
SPACING
NOMINALSPACING
NOMINALSPACING
1/8" STANDARD5/16" OPTIONAL
2 1/2"
BETWEEN FRAME WIDTH
(989) 358-7000
Gra
vity C
onve
yo
rs
- 130 -
Gravity Roller Conveyor1 3/8 in. dia. x 18 ga. Rollers
1 3/8 in. dia. Gravity Roller Conveyor is ideal forcarrying lightweight packages or in operations requiringlightweight moveable sections.
■■■■■ Steel or Aluminum Frames
■■■■■ Rollers Set High or Low■■■■■ 8 Roller Spacings
■■■■■ 6 Widths
ROLLERS HIGH
Standard Specifications:Frame - 2 1/2 in. deep by 1 in. flange x 12 ga. galvanized steel or1/8 in. aluminum channel with bolt-in cross members, spacedevery 2 ft. An economy lite line is available with 14 ga. channelframes. 4 in. deep channel frames for rollers low.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. and 30 in. overall.
Lengths - 5 ft. and 10 ft. straight sections. Special lengthsavailable.
End Couplers - Gravity hooks on one end - rod on opposite end.All couplings are bolted to frame. Bolt-in end couplers alsoavailable.
Rollers - 1 3/8 in. dia. x 18 ga. galvanized or heat-treated aluminumtubing. Oiled ball bearings both ends.
Axles - 1/4 in. dia. spring retained axle spaced on 1 1/2 in., 3 in.,4 in., 4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
Note: Frame capacities shown are for 2 1/2 in. deep frames only.
Gravity Roller Curve Conveyor1 3/8 in. dia. x 18 ga. Rollers1 3/8 in. dia. x 18 ga. Rollers
1 3/8 in. dia. Gravity Roller Curves are compatiblewith straight sections, providing flexibility to yourconveyor line. They are ideal for carryinglightweight packages.
Rollers - 1 3/8 in. dia. x 18 ga. galvanized or heat-treatedaluminum tubing. Oiled ball bearings both ends.
Axles - 1/4 in. dia. spring retained axle spaced on 1 1/2 in.or 3 in. equivalent spacing.
Capacity - Same “Per Foot” capacity as straight sections.
Frame - 2 1/2 in. deep x 1 in. flange x 12 ga. galvanized steelor 1/8 in. aluminum channel with bolt-in cross members. 4 in. deepchannel frames for rollers low.
Widths - 12 in., 15 in., 18 in., 21 in., 24 in. and 30 in. overall.
Curves - 45° and 90°: 48 in. outside radius - 12 in., 15 in. and18 in. widths; 60 in. outside radius - 21 in., 24 in. and 30 in. widths.
End Couplers - Gravity hooks and rods on both ends of curve.Bolt-in end couplers also available.
90° 45°
90° 45°
90° 45° 90° 45°
OVERALL FRAME WIDTH
2 1/2"
3/32"BETWEEN FRAME WIDTH1"
OVERALL FRAME WIDTH
4"
1 13/32"
BETWEEN FRAME WIDTH1"
OU
TSID
ER
AD
IUS
INS
IDE
RA
DIU
S
(989) 358-7000
Gra
vity C
onve
yo
rs
- 132 -
Gravity Roller Conveyor1.9 in. dia. x 16 ga. Rollers
1.9 in. dia. Gravity Roller Conveyor is used in permanentinstallations. It provides an economical means of carryinglightweight to medium weight packages.
■ ■ ■ ■ ■ 27 Between Frame Widths
■ ■ ■ ■ ■ 8 Roller Centers
■ ■ ■ ■ ■ Bolt-in Cross Members
ROLLERS HIGH
ROLLERS LOW
(Optional)
Note: Frame capacities shown are for 3 1/2 in. deep frames only.Note: Also available with 4 in., 8 in., 9 in., or 12 in. Roller Centers.
In Stock
Standard Specifications:Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanizedsteel channel with bolt-in cross members. An economy lite lineis available with 12 ga. channel frames. 4 1/2 in. deep framesfor rollers low.
Between Frame Widths - 13 through 39 in full one inchincrements.
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections. Other lengths alsoavailable.
Rollers - 1.9 in. dia. x 16 ga. galvanized steel tubing.Grease-packed ball bearings both ends. Mild steel tubesalso available.
Axles - 7/16 spring retained hex axle spaced on 2 in., 3 in., 4 in.,4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
Gravity Roller Conveyor1.9 in. dia. x 13 ga. Rollers1 3/8 in. dia. x 18 ga. Rollers
1.9 in. dia. Gravity Roller Conveyor is used in permanentinstallations. It provides an economical means of carryinglightweight to medium weight packages.
■ ■ ■ ■ ■ 27 Between Frame Widths
■ ■ ■ ■ ■ 8 Roller Centers
■ ■ ■ ■ ■ Bolt-in Cross Members
ROLLERS HIGH
ROLLERS LOW
(Optional)
Note: Also available with 4 in., 8 in., 9 in., or 12 in. Roller Centers.Note: Frame capacities shown are for 3 1/2 in. deep frames only.
Standard Specifications:Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized steelchannel with bolt-in cross members. Specify 4 1/2 in. deep framesfor rollers low. An economy lite line is also available with 12 ga.channel frames.
Between Frame Widths - 13 through 39 in full one inchincrements.
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections. Other lengthsalso available.
Rollers - 1.9 in. dia. (1 7/8 in. actual) x 13 ga. steel tubing.Oiled plain ball bearings both ends.
Gravity Roller Conveyor1.9 in. dia. x .145 Wall Rollers
■ ■ ■ ■ ■ 27 Between Frame Widths
■ ■ ■ ■ ■ 8 Roller Centers
■ ■ ■ ■ ■ Bolt-in Cross Members
ROLLERS HIGH
ROLLERS LOW
(Optional)
Note: Frame capacities shown are for 3 1/2 in. deep frames only. Note: Also available with 4 in., 8 in., 9 in., or 12 in. Roller Centers.
Standard Specifications:Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanizedsteel channel with bolt-in cross members. An economy lite lineis also available with 12 ga. channel frames. Specify4 1/2 in. deep frames for rollers low.
Between Frame Widths - 13 through 39 in full one inchincrements.
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections. Other lengths alsoavailable.
Rollers - 1.9 in. dia. x .145 wall steel tubing. Bearings are labyrinthshielded and oiled.
Axles - 7/16 spring retained hex axle spaced on 2 in., 3 in., 4 in.,4 1/2 in., 6 in., 8 in., 9 in. or 12 in. centers.
TRAHCYTICAPACDAOL
troppuSsretneC
yticapaCemarF yticapaCrelloR
ylmrofinU.xaMdaoLdetubirtsiD
daoL.xaMrelloRreP
'5 0033003
'01 0021
neewteBemarFhtdiW
.oNledoMsrelloR.ag9x9.1
relloRsretneC)sehcni(
sthgieW).sbL(
'5 '01
31
2-31-9x9.1-SHUG3-31-9x9.1-SHUG5.4-31-9x9.1-SHUG
6-31-9x9.1-SHUG
235.4
6
451411
6847
703722571741
41
2-41-9x9.1-SHUG3-41-9x9.1-SHUG5.4-41-9x9.1-SHUG
6-41-9x9.1-SHUG
235.4
6
061811
9867
913532081151
51
2-51-9x9.1-SHUG3-51-9x9.1-SHUG5.4-51-9x9.1-SHUG
6-51-9x9.1-SHUG
235.4
6
961421
3997
733742981751
61
2-61-9x9.1-SHUG3-61-9x9.1-SHUG5.4-61-9x9.1-SHUG
6-61-9x9.1-SHUG
235.4
6
971131
7938
653062891461
71
2-71-9x9.1-SHUG3-71-9x9.1-SHUG5.4-71-9x9.1-SHUG
6-71-9x9.1-SHUG
235.4
6
881731101
68
473272602071
81
2-81-9x9.1-SHUG3-81-9x9.1-SHUG5.4-81-9x9.1-SHUG
6-81-9x9.1-SHUG
235.4
6
602941901
29
114792322381
91
2-91-9x9.1-SHUG3-91-9x9.1-SHUG5.4-91-9x9.1-SHUG
6-91-9x9.1-SHUG
235.4
6
212351211
49
324503922781
02
2-02-9x9.1-SHUG3-02-9x9.1-SHUG5.4-02-9x9.1-SHUG
6-02-9x9.1-SHUG
235.4
6
612651411
69
034013232091
12
2-12-9x9.1-SHUG3-12-9x9.1-SHUG5.4-12-9x9.1-SHUG
6-12-9x9.1-SHUG
235.4
6
222061611
89
244813732491
22
2-22-9x9.1-SHUG3-22-9x9.1-SHUG5.4-22-9x9.1-SHUG
6-22-9x9.1-SHUG
235.4
6
822461911001
554723442991
32
2-32-9x9.1-SHUG3-32-9x9.1-SHUG5.4-32-9x9.1-SHUG
6-32-9x9.1-SHUG
235.4
6
732071321301
374933252502
42
2-42-9x9.1-SHUG3-42-9x9.1-SHUG5.4-42-9x9.1-SHUG
6-42-9x9.1-SHUG
235.4
6
742571821601
684843162012
52
2-52-9x9.1-SHUG3-52-9x9.1-SHUG5.4-52-9x9.1-SHUG
6-52-9x9.1-SHUG
235.4
6
352181031901
405063762612
62
2-62-9x9.1-SHUG3-62-9x9.1-SHUG5.4-62-9x9.1-SHUG
6-62-9x9.1-SHUG
235.4
6
262781531211
325373572322
neewteBemarFhtdiW
.oNledoMsrelloR.ag9x9.1
relloRsretneC)sehcni(
sthgieW).sbL(
'5 '01
72
2-72-9x9.1-SHUG3-72-9x9.1-SHUG5.4-72-9x9.1-SHUG
6-72-9x9.1-SHUG
235.4
6
172391931511
145583482922
82
2-82-9x9.1-SHUG3-82-9x9.1-SHUG5.4-82-9x9.1-SHUG
6-82-9x9.1-SHUG
235.4
6
772791141711
455493092432
92
2-92-9x9.1-SHUG3-92-9x9.1-SHUG5.4-92-9x9.1-SHUG
6-92-9x9.1-SHUG
235.4
6
782402641121
275604892042
03
2-03-9x9.1-SHUG3-03-9x9.1-SHUG5.4-03-9x9.1-SHUG
6-03-9x9.1-SHUG
235.4
6
692012051421
195914703742
13
2-13-9x9.1-SHUG3-13-9x9.1-SHUG5.4-13-9x9.1-SHUG
6-13-9x9.1-SHUG
235.4
6
503612451721
906134513352
23
2-23-9x9.1-SHUG3-23-9x9.1-SHUG5.4-23-9x9.1-SHUG
6-23-9x9.1-SHUG
235.4
6
413222851031
826444423062
33
2-33-9x9.1-SHUG3-33-9x9.1-SHUG5.4-33-9x9.1-SHUG
6-33-9x9.1-SHUG
235.4
6
123722161331
046254033462
43
2-43-9x9.1-SHUG3-43-9x9.1-SHUG5.4-43-9x9.1-SHUG
6-43-9x9.1-SHUG
235.4
6
033332561631
956564833172
53
2-53-9x9.1-SHUG3-53-9x9.1-SHUG5.4-53-9x9.1-SHUG
6-53-9x9.1-SHUG
235.4
6
933932961931
776774743772
63
2-63-9x9.1-SHUG3-63-9x9.1-SHUG5.4-63-9x9.1-SHUG
6-63-9x9.1-SHUG
235.4
6
453942671441
807894163882
73
2-73-9x9.1-SHUG3-73-9x9.1-SHUG5.4-73-9x9.1-SHUG
6-73-9x9.1-SHUG
235.4
6
853452771741
027605463292
83
2-83-9x9.1-SHUG3-83-9x9.1-SHUG5.4-83-9x9.1-SHUG
6-83-9x9.1-SHUG
235.4
6
463652081841
727115073592
93
2-93-9x9.1-SHUG3-93-9x9.1-SHUG5.4-93-9x9.1-SHUG
6-93-9x9.1-SHUG
235.4
6
373262481151
547325973103
3 1/2"
1/4"BETWEEN FRAME WIDTH
BETWEEN FRAME WIDTH
3/4"
4 1/2"
1.9 in. dia. Gravity Roller Conveyor is used in permanentinstallations. It provides an economical means of carryinglightweight to medium weight packages.
(989) 358-7000
Gra
vity
Co
nve
yo
rs
- 135 -
Gravity Roller Curve Conveyor1.9 in. dia. Rollers1 3/8 in. dia. x 18 ga. Rollers
1.9 in. dia. Gravity Roller Curves are used in permanentinstallations to carry medium weight packages. They arecompatible with straight sections providing flexibility toyour conveyor line.
* For tapered rollers, add “T” to Model Number. Example: GUHC1.9 x 16-13-3-45T
Standard Specifications:Frame - 3 1/2 in. deep x 1 1/2 in. flange x 10 ga. galvanized steelchannel with bolt-in cross members. Specify 4 1/2 in. deep framesfor rollers low.
Between Frame Widths - 13 through 39 in full one inch increments.
Curves - 45° and 90° with 32 1/2 in. inside radius for widths up to27 in. and 48 in. inside radius for 28 in. through 39 in. widths.
End Couplers - Bolt-on type each end.
Rollers - 1.9 in. dia. x 16 ga. galvanized steel or unplated tubewith grease-packed ball bearings both ends. 1.9 in. dia. x13 ga. and 1.9 in. dia. x 9 ga. steel tube also available withoiled ball bearings both ends. 2 1/2" to 1 11/16" tapered zincplated rollers. Mild steel tapered rollers also available.
Axles - 7/16" spring retained hex axle spaced on 3 in.equivalent centers.
Capacity - Same “Per Foot” capacity as straight sections.
TAPEREDROLLERS HIGH
TAPEREDROLLERS LOW
(Optional)
OU
TSID
ER
AD
IUS
INS
IDE
RA
DIU
S
ROLLERS HIGH
ROLLERS LOW (Optional)
BETWEEN FRAME WIDTH
3 1/2"
1/4"
BETWEEN FRAME WIDTH3/4"
4 1/2"
BETWEEN FRAME WIDTH
3 1/2"
1/4"
BETWEEN FRAME WIDTH3/4"
4 1/2"
(989) 358-7000
Gra
vity C
onve
yo
rs
- 136 -
Gravity Roller Conveyor2 1/2 in. dia. x 11 ga. Rollers
■ ■ ■ ■ ■ 27 Between Frame Widths
■ ■ ■ ■ ■ 6 Roller Centers
■ ■ ■ ■ ■ Painted Steel Frames
■ ■ ■ ■ ■ Bolt-in Cross Members
ROLLERS HIGH
ROLLERS LOW
(Optional)
In StockNote: Also available with 9 in. or 12 in. roller centers.
Standard Specifications:Frame - 4 in. deep x 1 1/2 in. flange x 7 ga. painted steelchannel with bolt-in cross members for rollers high; weldedcross members for rollers low.
Between Frame Widths - 13 through 39 in full one inchincrements (larger widths available).
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections.
Rollers - 2 1/2 in. dia. x 11 ga. steel tubing. Grease packed plainball bearings both ends. Labyrinth shielded bearings optional.
Axles - 11/16 spring retained hex axle spaced on 3 in., 4 in., 6 in.,8 in., 9 in. or 12 in. centers.
2 1/2 in. dia. Gravity Roller Conveyor is used inpermanent installations. It provides an economicalmeans of carrying medium to heavy weight packages.
(989) 358-7000
Gra
vity
Co
nve
yo
rs
- 137 -
Gravity Roller Conveyor2 9/16 in. dia. x .180 Wall Rollers1 3/8 in. dia. x 18 ga. Rollers
■ ■ ■ ■ ■ 27 Between Frame Widths
■ ■ ■ ■ ■ 6 Roller Centers
■ ■ ■ ■ ■ Painted Steel Frames
■ ■ ■ ■ ■ Bolt-in Cross Members
Note: Also available with 9 in. or 12 in. roller centers.
ROLLERS HIGH
ROLLERS LOW
(Optional)
Standard Specifications:Frame - 4 in. deep x 1 1/2 in. flange x 7 ga. painted steel channelwith bolt-in cross members for rollers high, welded cross membersfor rollers low.
Between Frame Widths - 13 through 39 in full one inch increments(larger widths available).
End Couplers - Bolt-on type for bolting sections together.
Lengths - 5 ft. and 10 ft. straight sections.
Rollers - 2 9/16 in. dia. x .180 wall steel tubing. Grease packedplain ball bearings. Labyrinth shielded bearings optional.
Axles - 11/16 spring retained hex axle spaced on 3 in., 4 in.,6 in., 8 in., 9 in. or 12 in. centers.
Note: The above list is an overview of general sizesavailable. For a complete size listing and more detailedroller information, see our “Roller and Bearing Section”.