GP328 Plus/GP338 Plus Portable Radio Detailed Service Manual 6804112J28-C March, 2002 http://www.myradio168.net
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GP328 Plus/GP338 PlusPortable Radio
Detailed Service Manual
6804112J28-C
March, 2002
http:/
/www.m
yrad
io168
.net
semi-exclu-
rolamissionplica-r the
Computer Software CopyrightsThe Motorola products described in this manual may include copyrighted Motorola computer programs stored inconductor memories or other media. Laws in the United States and other countries preserve for Motorola certainsive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form, thecopyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motoproducts described in this manual may not be copied or reproduced in any manner without the express written perof Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant, either directly or by imtion, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola, except fonormal non-exclusive royalty-free license to use that arises by operation of law in the sale of a product.
http:/
/www.m
yrad
io168
.net
2000, 2001, 2002 by Motorola, Inc.Motorola Technology Sdn. Bhd. (Co. No. 455657-H)Bayan Lepas FIZ Phase III11900 Penang, Malaysia
Printed in MalaysiaMarch, 2002
*6804112J28*6804112J28-Chtt
p://w
ww.myr
adio1
68.ne
t
i
SAFETY INFORMATIONSAFETY AND GENERAL INFORMATION
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR RADIO.
The information provided in this document supersedes the general safety information contained inuser guides published prior to June 2001. For information regarding radio use in a hazardousatmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or InstructionCard, which is included with radio models that offer this capability.
RADIO FREQUENCY (RF) OPERATIONAL CHARACTERISTICSTo transmit (talk) you must push the Push-To-Talk button; to receive (listen) you must releasethe Push-To-Talk button . When the radio is transmitting, it generates radio frequency (RF) energy;when it is receiving, or when it is off, it does not generate RF energy.
RADIO OPERATION AND EME EXPOSUREYour Motorola radio is designed to comply with the following national and international standards andguidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):
• United States Federal Communications Commission, Code of Federal Regulations;47 CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers(IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition• National Council on Radiation Protection and Measurements (NCRP) of the United States,
Report 86, 1986• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999• Australian Communications Authority Radiocommunications (Electromagnetic Radiation -
Human Exposure) Standard 1999 (applicable to wireless phones only)• Anatel,Brasil Regulatory Authority.
"This equipment is in compliance with the limits of Specific Absorption Rate which refer to theexposure to electric, magnetic and electromagnetic fields adopted by ANATEL".
To assure optimal radio performance and make sure human exposure to radio frequencyelectromagnetic energy is within the guidelines set forth in the above standards, alwaysadhere to the following procedures :
Two-way Radio OperationWhen using your radio, hold the radio in a vertical positionwith the microphone one to two inches (2.5 to 5 centimeters)away from the lips .
Body-worn OperationTo maintain compliance with FCC RF exposure guidelines, if youwear a radio on your body when transmitting, always place theradio in a Motorola approved clip, holder, holster, case, orbody harness for this product . Use of non-Motorola-approved accessories may exceed FCC RFexposure guidelines. If you do not use a Motorola approved body-worn accessory and are notusing the radio in the intended use positions along side of the head in the phone mode or in
2.5 to 5.0 cm(1 to 2 in.)
http:/
/www.m
yrad
io168
.net
ii SAFETY INFORMATION
front of the face in the two-way radio mode, then ensure the antenna and radio is kept thefollowing minimum distances from the body when transmitting :
• Phone or Two-way radio mode: one inch (2.5 centimeters)• Data operation using any data feature with or without an accessory cable: one inch (2.5
centimeters)
Antenna CareUse only the supplied or an approved replacement antenna.Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCCregulations.
DO NOT hold the antenna when the radio is “IN USE”. Holding the antenna affects call quality andmay cause the radio to operate at a higher power level than needed.
Approved AccessoriesFor a list of approved Motorola accessories look in the appendix or accessory section of your radio’sUser Guide.
ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facilitywhere posted notices instruct you to do so. Hospitals or health care facilities may be using equipmentthat is sensitive to external RF energy.
AircraftWhen instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be inaccordance with applicable regulations per airline crew instructions.
Medical Devices
• Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches(15 centimeters) be maintained between a handheld wireless radio and a pacemaker. Theserecommendations are consistent with those of the U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the radio more than six inches (15 centimeters) from their pacemaker when theradio is turned ON.
• not carry the radio in the breast pocket.• use the ear opposite the pacemaker to minimize the potential for interference.• turn the radio OFF immediately if you have any reason to suspect that interference is taking
place.
• Hearing Aids
Some digital wireless radios may interfere with some hearing aids. In the event of such interference,you may want to consult your hearing aid manufacturer to discuss alternatives.
NOTE Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inade-quately shielded, designed, or otherwise configured for electromagnetic compatibility.
http:/
/www.m
yrad
io168
.net
SAFETY INFORMATION iii
• Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determineif it is adequately shielded from RF energy. Your physician may be able to assist you in obtainingthis information.
SAFETY AND GENERAL
Use While DrivingCheck the laws and regulations on the use of radios in the area where you drive. Always obey them.
When using your radio while driving, please:
• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require.
OPERATIONAL WARNINGS
For Vehicles With An Air BagDo not place a portable radio in the area over an air bag or in the air bag deploymentarea. Air bags inflate with great force. If a portable radio is placed in the air bagdeployment area and the air bag inflates, the radio may be propelled with great forceand cause serious injury to occupants of the vehicle.
Potentially Explosive AtmospheresTurn off your radio prior to entering any area with a potentiallyexplosive atmosphere, unless it is a radio type especially qualified for use in such areas as“Intrinsically Safe” (for example, Factory Mutual, CSA, UL, or CENELEC). Do not remove, install, orcharge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosionor fire resulting in bodily injury or even death.
Blasting Caps And AreasTo avoid possible interference with blasting operations, turn off your radio when you are nearelectrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signsand instructions.
NOTE The areas with potentially explosive atmospheres referred to above include fuelingareas such as below decks on boats, fuel or chemical transfer or storage facilities,areas where the air contains chemicals or particles, such as grain, dust or metal pow-ders, and any other area where you would normally be advised to turn off your vehi-cle engine. Areas with potentially explosive atmospheres are often but not alwaysposted.
!W A R N I N G
!
http:/
/www.m
yrad
io168
.net
iv SAFETY INFORMATION
OPERATIONAL CAUTIONS
AntennasDo not use any portable radio that has a damaged antenna. If a damaged antennacomes into contact with your skin, a minor burn can result.
BatteriesAll batteries can cause property damage and/or bodily injury such as burns if a conductive materialsuch as jewelry, keys, or beaded chains touch exposed terminals. The conductive material maycomplete an electrical circuit (short circuit) and become quite hot. Exercise care in handling anycharged battery, particularly when placing it inside a pocket, purse, or other container with metalobjects.
!C a u t i o n
http:/
/www.m
yrad
io168
.net
v
Table of Contents
Section 1 Introduction
1.0 Scope of Manual.................................................................................................. 1-12.0 Warranty and Service Support............................................................................. 1-1
2.1 Warranty Period ............................................................................................. 1-12.2 After Warranty Period..................................................................................... 1-12.3 Piece Parts ..................................................................................................... 1-22.4 Technical Support .......................................................................................... 1-2
Section 2 Service Aids
1.0 Recommended Test Tools................................................................................... 2-1
Section 3 Power Up Self-Test
1.0 Error Codes ......................................................................................................... 3-1
Section 4 Controller Information
1.0 Overview.............................................................................................................. 4-12.0 Radio Power Distribution ..................................................................................... 4-13.0 Controller Board................................................................................................... 4-2
3.1 General........................................................................................................... 4-23.2 Digital Architecture ......................................................................................... 4-33.3 Keypad ........................................................................................................... 4-53.4 Troubleshooting Chart.................................................................................... 4-63.5 Controller Board Diagrams............................................................................. 4-7Controller Board Top View (PCB No. 8404051G07/G08) ..................................... 4-7Controller Board Bottom View (PCB No.8404051G07/G08) .................................. 4-83.6 Controller Schematics .................................................................................... 4-9Complete Controller Schematic Diagram ............................................................... 4-9Controller ASFIC/ON_OFF Schematic Diagram .................................................. 4-10Controller Micro Processor Schematic Diagram .................................................. 4-11Controller Memory Schematic Diagram ............................................................... 4-12Controller Audio Power Amplifier Schematic Diagram ......................................... 4-13Controller Parts List for VHF (for 8404051G07/G08)) .......................................... 4-14Controller Parts List for UHF 1, UHF 2 and 330MHz (for 8404051G07/G08) ...... 4-153.7 Controller Board Diagrams........................................................................... 4-16Controller Board Top View (PCB No. 8404056G01) ............................................ 4-16Controller Board Bottom View (PCB No.8404056G01)........................................ 4-17Controller Board Top View (PCB No. 8404056G02) ............................................ 4-18Controller Board Bottom View (PCB No. 8404056G02)....................................... 4-19
http:/
/www.m
yrad
io168
.net
vi
3.8 Controller Schematics (for 8404056G01) .....................................................4-20Complete Controller Schematic Diagram..............................................................4-20Controller ASFIC/ON_OFF Schematic Diagram...................................................4-21Controller Micro Processor Schematic Diagram ...................................................4-22Controller Memory Schematic Diagram ................................................................4-23Controller Audio Power Amplifier Schematic Diagram..........................................4-24Controller Interface Schematic Diagram (for 8404056G01)..................................4-25Controller Interface Schematic Diagram (for 8404056G02)..................................4-26Controller Parts List for VHF (for 8404056G01/G02)............................................4-27Controller Parts List for UHF 1, UHF 2 and 330MHz (for 8404056G01/G02).......4-29
Section 5A Model Chart and Test Specifications (136-174 Mhz)
1.0 Model Chart....................................................................................................... 5A-12.0 Specifications (for GP328 Plus) ........................................................................ 5A-23.0 Specifications (for GP338 Plus) ........................................................................ 5A-34.0 Transmitter ........................................................................................................ 5A-4
4.1 General ........................................................................................................ 5A-45.0 Receiver ............................................................................................................ 5A-6
5.1 Receiver Front-End...................................................................................... 5A-65.2 Receiver Back-End ...................................................................................... 5A-75.3 Automatic Gain Control Circuit .................................................................... 5A-8
6.0 Frequency Generation Circuitry ........................................................................ 5A-96.1 Synthesizer ................................................................................................ 5A-106.2 VCO - Voltage Controlled Oscillator .......................................................... 5A-11
7.0 Notes For All Schematics and Circuit Boards ................................................. 5A-138.0 Circuit Board/Schematic Diagrams and Parts List .......................................... 5A-15
VHF (136-174MHz) Main Board Top Side PCB No. 8404055G05/G06/G07..... 5A-15VHF (136-174MHz) Main Board Bottom Side PCB No. 8404055G05/G06/G07 5A-16VHF (136-174MHz) Main Board Top Side PCB No. 8404055G09 .................... 5A-17VHF (136-174MHz) Main Board Bottom Side PCB No. 8404055G09............... 5A-18VHF Controls And Switches Schematic Diagram (sheet 1 of 2) ........................ 5A-19VHF Controls And Switches Schematic Diagram (sheet 2 of 2) ........................ 5A-20VHF Controls And Switches Schematic Diagram
(sheet 2 of 2 for 8404055G09 PCB) .......................................................... 5A-21VHF Receiver Front End Schematic Diagram ................................................... 5A-22VHF Receiver Back End Schematic Diagram.................................................... 5A-23VHF Synthesizer Schematic Diagram................................................................ 5A-24VHF Voltage Controlled Oscillator Schematic Diagram..................................... 5A-25VHF Transmitter Schematic Diagram ................................................................ 5A-26VHF Radio Parts List (RF Board)....................................................................... 5A-27
9.0 Troubleshooting Charts................................................................................... 5A-31Troubleshooting Flow Chart for Controller ......................................................... 5A-31Troubleshooting Flow Chart for Receiver (Sheet 1 of 2).................................... 5A-32Troubleshooting Flow Chart for Receiver (Sheet 2 of 2).................................... 5A-33Troubleshooting Flow Chart for Transmitter ...................................................... 5A-34
http:/
/www.m
yrad
io168
.net
vii
Troubleshooting Flow Chart for Synthesizer ......................................................5A-35Troubleshooting Flow Chart for VCO .................................................................5A-36
Section 5B Model Chart and Test Specifications (403-470 Mhz)
1.0 Model Chart .......................................................................................................5B-12.0 Specifications (for GP328 Plus).........................................................................5B-23.0 Specifications (for GP338 Plus).........................................................................5B-34.0 Transmitter.........................................................................................................5B-4
4.1 General.........................................................................................................5B-45.0 Receiver.............................................................................................................5B-6
5.1 Receiver Front-End ......................................................................................5B-65.2 Receiver Back-End.......................................................................................5B-75.3 Automatic Gain Control Circuit .....................................................................5B-8
6.0 Frequency Generation Circuitry.........................................................................5B-96.1 Synthesizer.................................................................................................5B-106.2 VCO - Voltage Controlled Oscillator...........................................................5B-11
7.0 Notes For All Schematics and Circuit Boards..................................................5B-138.0 Circuit Board/Schematic Diagrams and Parts List...........................................5B-15
UHF (403-470MHz) Main Board Top Side PCB No. 8404077G05/G06/G07.....5B-15UHF (403-470MHz) Main Board Bottom Side PCB No. 8404077G05/G06/G075B-16UHF (403-470MHz) Main Board Top Side PCB No. 8404077G09 ....................5B-17UHF (403-470MHz) Main Board Bottom Side PCB No. 8404077G09 ...............5B-18UHF Controls And Switches Schematic Diagram (sheet 1 of 2) ........................5B-19UHF Controls And Switches Schematic Diagram
(sheet 2 of 2 for 8404077G09 PCB)...........................................................5B-20UHF Receiver Front End Schematic Diagram....................................................5B-21UHF Receiver Back End Schematic Diagram ....................................................5B-22UHF Synthesizer Schematic Diagram................................................................5B-23UHF Voltage Controlled Oscillator Schematic Diagram .....................................5B-24UHF Transmitter Schematic Diagram ................................................................5B-25UHF Band 1 Radio Parts List (RF Board) ..........................................................5B-26
9.0 Troubleshooting charts ....................................................................................5B-29Troubleshooting Flow Chart for Controller .........................................................5B-29Troubleshooting Flow Chart for Receiver (Sheet 1 of 2) ....................................5B-30Troubleshooting Flow Chart for Receiver (Sheet 2 of 2) ....................................5B-31Troubleshooting Flow Chart for Transmitter .......................................................5B-32Troubleshooting Flow Chart for Synthesizer ......................................................5B-33Troubleshooting Flow Chart for VCO .................................................................5B-34
Section 5C Model Chart and Test Specifications (450-527 Mhz)
1.0 Model Chart ...................................................................................................... 5C-12.0 Specifications (for GP328 Plus)........................................................................ 5C-23.0 Specifications (for GP338 Plus)........................................................................ 5C-34.0 Transmitter........................................................................................................ 5C-4
http:/
/www.m
yrad
io168
.net
viii
4.1 General ........................................................................................................5C-45.0 Receiver ............................................................................................................5C-6
5.1 Receiver Front-End......................................................................................5C-65.2 Receiver Back-End ......................................................................................5C-75.3 Automatic Gain Control Circuit ....................................................................5C-8
6.0 Frequency Generation Circuitry ........................................................................5C-96.1 Synthesizer ................................................................................................ 5C-106.2 VCO - Voltage Controlled Oscillator .......................................................... 5C-11
7.0 Notes For All Schematics and Circuit Boards ................................................. 5C-138.0 Circuit Board/Schematic Diagrams and Parts List ..........................................5C-15
UHF Band 2 (450-527MHz) Main Board Top SidePCB No. 8404102G03/G04/G05 ............................................................... 5C-15
UHF Band 2 (450-527MHz) Main Board Bottom SidePCB No. 8404102G03/G04/G05 ............................................................... 5C-16
UHF Band 2 (450-527MHz) Main Board Top Side PCB No. 8404102G07........5C-17UHF Band 2 (450-527MHz) Main Board Bottom Side PCB No. 8404102G07 .. 5C-18UHF Band 2 Controls And Switches Schematic Diagram (sheet 1 of 2) ........... 5C-19UHF Band 2 Controls And Switches Schematic Diagram (sheet 2 of 2) ........... 5C-20UHF Band 2 Controls And Switches Schematic Diagram
(sheet 2 of 2 for 8404102G07 PCB) .......................................................... 5C-21UHF Band 2 Receiver Front End Schematic Diagram....................................... 5C-22UHF Band 2 Receiver Back End Schematic Diagram ....................................... 5C-23UHF Band 2 Synthesizer Schematic Diagram ...................................................5C-24UHF Band 2 Voltage Controlled Oscillator Schematic Diagram ........................5C-25UHF Band 2 Transmitter Schematic Diagram....................................................5C-26UHF Band 2 Radio Parts List (RF Board) .......................................................... 5C-27
9.0 Troubleshooting charts....................................................................................5C-31Troubleshooting Flow Chart for Controller .........................................................5C-31Troubleshooting Flow Chart for Receiver (Sheet 1 of 2)....................................5C-32Troubleshooting Flow Chart for Receiver (Sheet 2 of 2)....................................5C-33Troubleshooting Flow Chart for Transmitter ...................................................... 5C-34Troubleshooting Flow Chart for Synthesizer...................................................... 5C-35Troubleshooting Flow Chart for VCO.................................................................5C-36
Section 5D Model Chart and Test Specifications (330-400 Mhz)
1.0 Model Chart....................................................................................................... 5D-12.0 Specifications (for GP328 Plus) ........................................................................5D-23.0 Specifications (for GP338 Plus) ........................................................................5D-34.0 Transmitter ........................................................................................................5D-4
4.1 General ........................................................................................................5D-45.0 Receiver ............................................................................................................5D-6
5.1 Receiver Front-End......................................................................................5D-65.2 Receiver Back-End ......................................................................................5D-75.3 Automatic Gain Control Circuit ....................................................................5D-8
6.0 Frequency Generation Circuitry ........................................................................5D-9
http:/
/www.m
yrad
io168
.net
ix
6.1 Synthesizer................................................................................................ 5D-106.2 VCO - Voltage Controlled Oscillator.......................................................... 5D-11
7.0 Notes For All Schematics and Circuit Boards................................................. 5D-138.0 Circuit Board/Schematic Diagrams and Parts List.......................................... 5D-15
330-400MHz Main Board Top Side PCB No. 8404101G02/G03/G04............... 5D-15330-400MHz Main Board Bottom Side PCB No. 8404101G02/G03/G04 ......... 5D-16330-400MHz Main Board Top Side PCB No. 8404101G06 .............................. 5D-17330-400MHz Main Board Bottom Side PCB No. 8404101G06 ......................... 5D-18330-400MHz Controls And Switches Schematic Diagram (sheet 1 of 2) .......... 5D-19330-400MHz Controls And Switches Schematic Diagram (sheet 2 of 2) .......... 5D-20330-400MHz Controls And Switches Schematic Diagram
(sheet 2 of 2 for 8404101G06 PCB).......................................................... 5D-21330-400MHz Receiver Front End Schematic Diagram ..................................... 5D-22330-400MHz Receiver Back End Schematic Diagram...................................... 5D-23330-400MHz Synthesizer Schematic Diagram.................................................. 5D-24330-400MHz Voltage Controlled Oscillator Schematic Diagram....................... 5D-25330-400MHz Transmitter Schematic Diagram .................................................. 5D-26330-400MHz Radio Parts List (RF Board)......................................................... 5D-27
9.0 Troubleshooting charts ................................................................................... 5D-31Troubleshooting Flow Chart for Controller ........................................................ 5D-31Troubleshooting Flow Chart for Receiver (Sheet 1 of 2) ................................... 5D-32Troubleshooting Flow Chart for Receiver (Sheet 2 of 2) ................................... 5D-33Troubleshooting Flow Chart for Transmitter ...................................................... 5D-34Troubleshooting Flow Chart for Synthesizer ..................................................... 5D-35Troubleshooting Flow Chart for VCO ................................................................ 5D-36
Section 6 Flex Layout/Schematic Diagrams and Parts Lists
1.0 RF-Controller Interconnect Flex........................................................................... 6-11.1 Rev A.............................................................................................................. 6-11.2 Rev B.............................................................................................................. 6-1
2.0 Schematic for RF-Controller Interconnect Flex.................................................... 6-23.0 Universal Connector Flex .................................................................................... 6-3
3.1 GP328 Plus .................................................................................................... 6-33.2 GP338 Plus .................................................................................................... 6-4
4.0 Schematic for Universal Connector Flex ............................................................. 6-54.1 GP328 Plus .................................................................................................... 6-54.2 GP338 Plus .................................................................................................... 6-5
5.0 Parts List for Universal Connector Flex ............................................................... 6-65.1 GP328 Plus .................................................................................................... 6-65.2 GP338 Plus .................................................................................................... 6-6
http:/
/www.m
yrad
io168
.net
x
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
1-1
Section 1
INTRODUCTION
1.0 Scope of ManualThis manual is intended for use by service technicians familiar with similar types of equipment. Itcontains service information required for the equipment described and is current as of the printingdate. Changes which occur after the printing date may be incorporated by a complete Manual revisionor alternatively as additions.
2.0 Warranty and Service SupportMotorola offers long term support for its products. This support includes full exchange and/or repair ofthe product during the warranty period, and service/repair or spare parts support out of warranty. Any"return for exchange" or "return for repair" by an authorised Motorola Dealer must be accompanied bya Warranty Claim Form. Warranty Claim Forms are obtained by contacting an Authorised MotorolaDealer.
2.1 Warranty Period
The terms and conditions of warranty are defined fully in the Motorola Dealer or Distributor or Resellercontract. These conditions may change from time to time and the following notes are for guidancepurposes only.
In instances where the product is covered under a "return for replacement" or "return for repair"warranty, a check of the product should be performed prior to shipping the unit back to Motorola. Thisis to ensure that the product has been correctly programmed or has not been subjected to damageoutside the terms of the warranty.
Prior to shipping any radio back to the appropriate Motorola warranty depot, please contact CustomerServices. All returns must be accompanied by a Warranty Claim Form, available from your CustomerServices representative. Products should be shipped back in the original packaging, or correctlypackaged to ensure no damage occurs in transit.
2.2 After Warranty PeriodAfter the Warranty period, Motorola continues to support its products in two ways.
1. Motorola's Accessories and Aftermarket Division (AAD) offers a repair service to both endusers and dealers at competitive prices.
2. AAD supplies individual parts and modules that can be purchased by dealers who are techni-cally capable of performing fault analysis and repair.
NOTE Before operating or testing these units, please read the Safety Information Section in thefront of this manual.
http:/
/www.m
yrad
io168
.net
1-2 Warranty and Service Support
2.3 Piece PartsSome replacement parts, spare parts, and/or product information can be ordered directly. If acomplete Motorola part number is assigned to the part, it is available from Motorola’s Accessories andAftermarket Division (AAD). If no part number is assigned, the part is not normally available fromMotorola. If the part number is appended with an asterisk, the part is serviceable by Motorola Depotonly. If a parts list is not included, this generally means that no user-serviceable parts are available forthat kit or assembly.
All orders for parts/information should include the complete Motorola identification number. All partorders should be directed to your local AAD office. Please refer to your latest price pages.
2.4 Technical Support
Technical support is available to assist the dealer/distributor in resolving any malfunction which maybe encountered. Initial contact should be by telephone wherever possible. When contactingMotorola Technical Support, be prepared to provide the product model number and the unit’s serialnumber.
Toll-Free
Non-Toll-Free
Country or Territory Number
China 800-810-0976
Indonesia 0800-1-686868
Malaysia 1800-801687
Philippines 1800-16510271
Singapore 1800-4855333
Thailand 1800-225412
Country or Territory Number
China (86-10) 6843-8231
Hong Kong SAR (852) 2966-4188
India (91) 80-658-7677-7678
Indonesia (62-21) 251-3050
Korea (822) 3466-5401
Malaysia (603) 7803-9922
Philippines (63-2) 810-0762
Singapore (65) 486-7171
Taiwan (886) 2-27058000 ext. 6308
Thailand (66) 2254-8388
Vietnam (84) 8-8294091
All Other Countries IDD code + (65) 4855333
http:/
/www.m
yrad
io168
.net
2-1
Section 2
SERVICE AIDS
1.0 Recommended Test ToolsTable 2-1 lists the tools recommended for working on this family of radios. These tools are alsoavailable from Motorola.
Table 2-1: Recommended Test Tools
Motorola Part No. Description Application
6680387A596680387A64
6680387A650180382A31
Extractor, 2-contactHeat controller with safetystand orSafety stand onlyPortable desoldering unit
Removal of discrete surface-mounted devices
6680375A740180386A81
0180386A78
0.025 replacement tip, 5/pkMiniature digital readoutsoldering station (incl. 1/64”micropoint tip)Illuminated magnifyingglass with lens attachment.
For 0180382A31 portable desoldering unit.
0180386A826684253C726680384A981010041A86
1080370B43
Anti-static grounding kitStraight proberBrushSolder (RMA type),63/37, 0.020” diameter1 lb. spoolRMA liquid flux
Used during all radio assembly and disassem-bly procedures
R-1070A
or R-1319A
Shields and surface-mounted component - ICremoval/rework station(order all heat-focus headsseparately)Shields and surface-mounted component - ICremoval/rework stationSMD10000 M.A.P.E.
Removal and assembly of surface-mountedintegrated circuits and shields
Removal and assembly of surface-mountedintegrated circuits and shieldshtt
p://w
ww.myr
adio1
68.ne
t
2-2 Recommended Test Tools
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
3-1
Section 3
POWER UP SELF-TEST
1.0 Error CodesTurning on the radio using the ON/OFF volume control starts a self-test routine which checks theRAM, ROM checksum, EEPROM hardware and EEPROM checksum. If these checks aresuccessfully completed, the radio will generate the Self-Test Pass Tone. Radio emits only “bonk” (300Hz) tone if it fails the self-test.
Error Code Explanation Corrective Action
“RAM TST ERROR” RAM Test Failure Retest radio by turning it off and turning it on again. Ifmessage reoccurs, replace RAM (U405).
“ROM CS ERROR” ROM Checksum iswrong.
Reprogram FLASH Memory, then retest. If messagereoccurs, replace ROM (U406).
“EEPRM HW ERROR” Codeplug structuremismatch, nonexistence ofcodeplug.
Reprogram codeplug with correct version and retestradio. If message reoccurs, replace EEPROM(U407).
“EEPRM CS ERROR” Codeplug check-sum is wrong.
Reprogram codeplug.
No Display Display module isnot connectedproperly.Display module isdamaged.
Check connection between main board and displaymodule.
Replace with new display module.
http:/
/www.m
yrad
io168
.net
3-2 Error Codes
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
4-1
Section 4
CONTROLLER INFORMATION
1.0 OverviewThis section provides a detailed theory of operation for the radio and its components.
2.0 Radio Power Distribution
Figure 4-1 illustrates the DC distribution throughout the radio board. A 7.5V battery (BATT 7.5V)supplies power directly to the electronic ON/OFFcontrol as UNSWB+. When the radio is turned on,MECH_SWB+ (ON/OFF volume control) will trigger the electronic ON/OFFcontrol(momentary-onpath), then SWB+ is distributed as shown in Figure 4-1. Vdda from 3.3V Vdda regulator will thensupply the microprocessor. Data is then sent to ASFIC_CMP to turn on GCB4(DAC). GCB4 will takeover the momentary-on path within 12ms. SWB+ will continue to support the whole board until theradio is turned off.
Radio will be turned-off on two conditions;
1. MECH_SWB+ turned off
2. Low battery
Figure 4-1: DC Power Distribution Block Diagram
Control
On/Off Switch
SWB+Fuse
Low BatteryDetect
Ant. SW
PCIC(ALC)PA, Driver
LI Ion
3.5VReg.
7.5V
Audio PA
VdddReg.
5V
ASFIC_CMPVCOBIC
FRACTNLVZIF
* LCDDriver
5V
RF. AMP, IF AMPExt. RX.
MECH.SWB+
UNSWB+
TX.
VddaReg.
R1
R5 R2 R3
Vdda
VdddBattery
Reg.
MCU Micro P, ROM& EEPROM
Buffer (NU)
Led
JumpersDual VddRegulatorScheme
Single VddRegulatorScheme
R1 Y Y
R2 N N
R3 N Y
R4 N N
R5 Y N
Vdda Y N
SW. Reg. N N*Not applicable to GP328 Plus
http:/
/www.m
yrad
io168
.net
4-2 Controller Board
When low battery level is detected by the microprocessor through both conditions above, it will storethe radio personality data to EEPROM before turning off.
3.0 Controller Board3.1 General
The controller board is the central interface between the various subsytems of the radio. It isseparated into digital and audio architectures. The digital portion consists of a special Motorolamicrocontroller (HC11FL0). The audio power amplifier (Audio PA) and audio/signalling/filter/companding IC (ASFIC_CMP) form the backbone of the audio/signalling architecture.
Figure 4-2: Controller Block Diagram
ExternalMicrophone
InternalMicrophone
ExternalSpeaker
InternalSpeaker
SCI to SideConnector
AudioPA
Audio/SignallingArchitecture
To Synthesizer
ModOut
16.8 MHzReference Clockfrom Synthesizer
Recovered Audio
Squelch
To RF BoardSPI
DigitalArchitecture
µP Clock
3.3VRegulator(Vddd)
RAM
EEPROM
ROM
HC11FL0
ASFIC_CMP
3.3VRegulator
(Vdda)
http:/
/www.m
yrad
io168
.net
Controller Board 4-3
3.2 Digital ArchitectureMCU configurationThere is one common MCU architecture for low-tier as well as for the high-tier products. It covers theConventional and Trunking portables. An open architecture system with the new HC11FL0 as theprocessor is used. Combinations of different size RAM, ROM and EEPROM are available for variousapplication software.
Real Time Clock (RTC)This radio supports Real Time Clock (RTC) module for purposes of Message Time Stamping andTime Keeping. The RTC module resides in the micro-processor HC11FL0. It is kept alive by a back-up Lithium Ion battery when the primary battery is removed.
Circuit DescriptionThe RTC module which resides in the HC11FL0 is powered by the ModB/Vstby pin and PI6/PI7 formthe crystal oscillator circuit. Clock frequency of 38.4kHz from a crystal oscillator provides thereference signal. In the processor, the frequency is divided down to 1Hz.
As the RTC module is powered separately from the processor Vdd, the RTC is kept alive through theModB / Vstby pin when the radio is switched off. A small button Lithium Ion battery continues to feedthe RTC when the primary battery is removed.
A MOSFET Q416 switches in the Li (Lithium) Ion supply when Vdd is removed. Q416 also providesisolation from BOOT_CTRL function in the event of radio program flashing. A small 3.3V regulator isused to charge the Li (Lithium) Ion battery.
Figure 4-3: RTC Circuit
LI_ION
R462
R4193
4
2
1 5CR411
1
23
Q416
C434
U4103.3V
32
1
VIN VOUT
VS
S
UNSWB+
R460C435R461
Vddd
HC11FL0
MODAMODB
R420
R426
FL401 C436
C437
PI6
PI7
OUT
IN
GND
38.4kHz
UNSWB+ SWB+
6
4
1
3
2
3
5 1
2
4
CR413R463300
Q417
TEST_POINTTP405
1
BOOT_CTRL
http:/
/www.m
yrad
io168
.net
4-4 Controller Board
ModB/Vstby SupplyUnder various conditions, the supply to the ModB/Vstby would vary. Table 4-1 shows theseconditions and circuits in operation.
Table 4-1: ModB/Vstby Supply Modes
Condition Circuit Operation
Radio On Vdd supply voltage via CR411
Radio Off • Vdd turned off• Q416 gate is pulled low by R462• Q416 is switched on• U410 supplies 3.2V to ModB/Vstby
Primary battery removed • Vdd turned off• Q416 gate is pulled low by R462• Q416 is switched on• Li Ion battery provides 3.2V to ModB/Vstby
Flash Mode • Boot_Ctrl line pull low• ModA & ModB goes low• Processor in boot-strap mode• Flashing enabled
http:/
/www.m
yrad
io168
.net
Controller Board 4-5
3.3 KeypadThe LED_EN setting is set by the codeplug. When the value is set to high, the LED will not light upduring power up and vice versa.
U602 is a comparator that will compare the voltage when any one of the keypad row or keypadcolumn keys is being pressed. Therefore when a key is being pressed, it will send a message to themicroprocessor through the output (KEY_INT) telling it that a key has been pressed. Themicroprocessor will then sample the Analog to Digital voltages at the keypad row and keypad columnand map it with the table so that the key being pressed can be identified. Once the key has beenidentified, the message that corresponds to the key will show up at the display.
Figure 4-4: Keypad Block Diagram
Micro Processor
Comparator
Keypad
ButtonLED
Dis
play
18pi
nco
nnec
tor
Key_Int
Keypad Column
Keypad
Data
Row
http:/
/www.m
yrad
io168
.net
4-6 Controller Board
3.4 Troubleshooting Chart
Figure 4-5: Keypad Board Troubleshooting Chart
Display
KeypadLED
End
Disconnect andreconnect 18-pin
flex
Disconnect andreconnect 40-pin
flex
ON
OFF
OFF
ON
IF STILL OFF
http:/
/www.m
yrad
io168
.net
4-7
3.5
22
7
1
U405
408
409
411
479
425
445
R471
5
R449
R450VR432 VR433
C441
C471
C472
C473
C490
C491
C492
C493
C494
C495
C496
C497
TP401TP402 TP405P410 TP415
C429
R408
R478
R492
R701
R702
C425C426
C481
R449
R481
C450
R423
R424
R431
R473
C447
C448
R472
Controller Board Top View (PCB No. 8404051G07/G08)
.net
Controller Board Diagrams
ZMY0130794-O
C431
C433
C730
R414
R415
R418
R437
C453 C456 R411
C449
R409
R457
R410
21
8
C435
R460
R463
C400
C401
C402
C713
R476
R406
R427
R416
C427
C428
R429
R447
R448
R451
R452
R453
R454
R455
R456
C701
C704
C706
C708
C710
C711
C714
C715
C720
C723
C726
C729
C702
C703
C705
C707
C709
C712
C717
C719
C724
C
CC410
CC414
C422
C430
C451
CR421
R
R436
R
R475
C416
C419C420
C421C444R
400
R413 R434
R43
VR445 VR446
VR447 VR448
V
V
C716
C718
C721
C722
C725
C727
C728
L400 C443
C445
L401
R477
TP406 T
C423
R428R432
R450
http:/
/www.m
yrad
io168
4-8
C733
C734
76
51
U409
CR412
CR413
RT400 4 3Q417
C403
Q400
4
58
U400
40
Contro
.net
ZMY0130795-O
C731
C732
32
1716
1
U406
1
26
C440
R498
R499
11
120
10
U420
1
37 25
13
U404
C480
L410
L411
C415
C424
C442
C475C476
C452
4 3
Q410
1 4
58
U407
Q403
CR440
43Q405
1
J400
22
20
J403
1
21
SH400
ller Board Bottom View (PCB No.8404051G07/G08)
http:/
/www.m
yrad
io168
4-9
3.6
ZMY0130783-O
UN
SW
B+ Vdda
GR
EE
N_L
ED
INT
_EX
T_V
dd
INT_MIC
RE
SE
T
SW
B+
AUDIO
AUDIO_PA_ENA
BA
TT
_CO
DE
EXT_MIC
EXT_SPKR_SEL
FLAT_RX_SND
5V
BA
TT
_CO
DE
GR
EE
N_L
ED
SCI_TX
VOL
VS_RAC
OPT_SEL1
OPT_SEL2
RDY
RSSI
RTA0
RTA1
RTA2
RTA3
SB1
SB2
SB3
SCI_RX
KEYPAD_COL
LI_ION
MECH_SWB+
BATT_DATA_OUT
OPT_ENA
BOOT_CTRL
SW
B+
UN
SW
B+
RE
SE
T
N.U.
N.U.
N.U.
N.U.
N.U.
SB1
RTA3
SB3
SB2
VOL
RTA1
RTA0
RTA2
KEYPAD_ROW N.U.
EX
T_M
IC
EX
T_S
PK
R_S
EL
FLA
T_R
X_S
ND
INT
_MIC
OP
T_S
EL1
OP
T_S
EL2
RS
SI
SC
I_R
X
SC
I_T
X
SW
B+
UN
SW
B+
Vdd
a
5V
AU
DIO
AU
DIO
_PA
_EN
A
BO
OT
_CT
RL
Vdd
a
5V
AUDIO_PA
MECH_SWB+
2602001P16SH400SHIELD
1
RS
SI
Complete Controller Schematic Diagram
.net
Controller Schematics
470pFC705
470pFC709
470pF
470pFC702C706
470pF470pF
470pFC713
470pFC708
C711470pF 470pF
C701
C710470pF
C703470pF
C714470pF
C712470pF
470pFC715
C704
C707
RTA0
RTA2
MECH_SWB+
PTT
SWB+
RED_LED
SB2
EMER
RTA1
RTA3
VOL
LVZIF_SEL
SB1
SB3
RESET
5V
RSSI
UNSWB+
CLK
MODIN
GREEN_LED
BATT_CODE
Vdda
16.8MHz
DEMOD
LOCK
DATA
CSXDACRx
RTA2
PTT
RTA3MECH_SWB+
SB3
LVZIF_SEL
RED_LEDGREEN_LED
EMERRTA0RTA1
SWB+
TO/FROM RFJ400
MODIN
SB2SB1
DATACLK
0902042P03
VOL
CSXDACRxSWB+
J400-10J400-24
J400-34
J400-36
J400-22
J400-37
J400-30J400-29J400-28
J400-17
J400-35
J400-33J400-32
J400-27J400-31
J400-2
J400-38
J400-16
J400-39J400-23
J400-25LOCKUNSWB+
GND
RESET
N.U.N.U.
RSSIDEMOD
Vdda
16.8MHz
GND
LI_IONBATT_CODE
GND
5V
UNSWB+UNSWB+
GNDGNDGNDGND
J400-18
J400-3
J400-9
J400-12J400-26
J400-7J400-8
J400-20
J400-11
J400-14
J400-19
J400-6
J400-13
J400-41
J400-5
J400-21
J400-15
J400-42
J400-40
J400-4
J400-1N.U.
C728470pF
C725NU470pF
C727C729470pF
470pFNUC720C722
470pF
C717470pFNU
C719
470pFC716C726
470pF
470pFC723
470pF
470pFC724
C721
C718
N.U
.
N.U
.
N.U
.
N.U
.
N.U
.
N.U.
N.U.
N.U.
N.U
.
N.U
.T
X_A
UD
_RT
N
TX
_AU
D_S
ND
UR
X_S
ND
VO
X
VS_AUDSEL
VS_GAINSEL
Vddd
HS
IO
LED
BL
LSIO
ME
CH
_SW
B+
MIS
O
MO
DIN
OF
F_B
AT
T_D
AT
A_O
UT
RE
D_L
ED
RX
_AU
D_R
TN
SQ
_DE
T
SY
N
BA
TT
_DA
TA
_IN
CH
AC
T
CLK
CS
X
DACRX
DA
TA
DEMOD
EE
_CS
F12
00
FLA
T_T
X_R
TN
16.8
MH
z
4V_3.3V
16.8
MH
z
DACRX
DEMOD
RE
D_L
ED
MO
DIN
ASFIC
UNSWB+
CLK
CSX
DATA
SWB+
RESET
N.U.
N.U.
LVZIF_SEL
VS_CS
Vddd
XA18
RAM_CS
R_W
FLASH_EN
FLASH_OE
LCD_SEL
LVZIF_SEL
D0D1D2D3D4D5D6D7
A10
A2A3A4A5A6A7A8A9
A0A1
OFF_
SQ
_DE
T
SY
N
VO
X
F12
00
HS
IO
LSIO
MIS
O
BA
TT
_DA
TA
_IN
CH
AC
T
CLK
CS
X
DA
TA
EE
_CS
MICRO_P
A11A12A13A14A15A16A17
N.U
.
N.U
.V
S_I
NT
PT
T
KE
Y_I
NT
LOC
K
EM
ER
PT
T
EM
ER
LOC
K
D2D3D4D5D6D7
FLA
SH
_EN
FLA
SH
_OE
RA
M_C
S
RESET
R_W
Vdd
d
XA
18
A12A13A14A15A16A17
A2A3A4A5A6A7A8A9
D0D1
A0A1
A10A11
MEMORY
470pF N.U.
800MHz TRUNKINGVHF
BOARD ID
UHF
C733C731 C734C732N.U. N.U.
470pF 100pF 33pF 33pF
http:/
/www.m
yrad
io168
4-10
0.1uFC402
10uFC403
4809579E18BCX71KLQ400
R40675K
BATT_CODEUNSWB+
1
23
UMG5
4802245J54
2
4 Q405
R41610K
31
OFF_BATT_DATA_OUT
MMBD6100LT14813833C02
1
23
CR440
2.7KR427
BATT_DATA_IN
Vddd
RB731U4802245J62
A2A3
K1K2K3
CR412
A1
Contro
.net
ZMY0130781-O
FLAT_RX_SND
(3.3V)Vdda
DEMOD
VOX
DACRx
0.1uFC479
R44524K
R44924K
30KR425
0.1uFC430
0.1uFC411
.022uFC451C414
0.1uFC4150.1uF
C4521uF
11
7
910
1
8
34
2
65
12
N.U.N.U.
VD
DR
C45
TXS
ND
44
UR
XO
UT
39
MIC
EX
T48
MIC
INT
46
MO
D40
GC
B4
37G
CB
538
GN
DR
C47
AU
XR
X43
AU
XTX
42
AU
DIO
41
VDDDAC
VOX
SQINUIO
VDDA
PLCAP
GNDADACU
DISC
DACGDACR
AGCCAP
5185130C53
ASFIC CMPVDDCP
VDDD
VDDSYNSYN
NC
GNDDGNDD0
F1200
CLK168
30C53U404
TXRTN 36
GCB3 3534
SQ
DE
T17
LCA
P24
LSIO
18
GN
DS
YN
23
HS
IO19
DA
TA22
GC
B0
15G
CB
114
GC
B2
13
CH
AC
T16
CLK
21C
SX
20
3233
2728
26
PLCAP2 25
313029
N.U
.
N.U
.
MO
DIN
AU
DIO
R4810.1uF24KC481
R4750 0.1uF
C410
Vdda470pFC408 C409
0.1uF
TP4101
INT_
MIC
EX
T_M
IC
16.8MHzRED_LED
NUC419
SYNF1200
0.1uFC416
(3.3V)Vdda
0.1uFC422C421
0.1uFC420
.01uF
047KR400
R413
5V
DA
TAC
LKC
SX
CH
AC
TS
Q_D
ET
LSIO
HS
IO
EX
T_S
PK
R_S
EL
AU
DIO
_PA
_EN
AG
RE
EN
_LE
D
EEPROM
8K x 8 EEPROM
10KR429
8V
CC
4V
SS
3 WP
X25650-2.7U407
1 CS
7 HOLD
6SCK
5 SI
2SO
0.1uFC428C427
470pF
EE_CS
MISO
Vddd
0.1uFC401
1TP406
SWB+
.01uFC400
ERROR5
FEEDBACK7
GN
D4
INPUT8
OUTPUT1
SENSE2SHUTDOWN
3
VTAP6
U400LP2951ACMM-3.3
24KR476
RESET
(3.3V)Vddd
MMBT3906L4813824A17
10KR448
NU
NUR455
R453
NUR454
15KR451
13
2Q403R452
100K
0R456
C48010uF
100KR447
MECH_SWB+
ller ASFIC/ON_OFF Schematic Diagram
http:/
/www.m
yrad
io168
4-11
ZMY0130785-O
THERM0680590Z01
OINT
RT40033.0K
51KR432
Mech_SWB+
Vddd
0.1uFC435R460
4.7K
Vddd
4802245J50UMC5N
1
3
Q417
2
6
4UNSWB+ SWB+
4802245J62RB731U
1
TEST_POINTTP405
300R463
A1A2A3
K1K2K3
CR413
BOOT_CTRL
47K
47K
4.7K
10K
Controller Micro Processor Schematic Diagram
.net
D4D5D6D7
A12A11A10
A9A8A7A6A5A4A3A2A1
D0D1D2D3
CLK
LVZIF_SEL
A17A16A15A14A13
CSXEE_CS
A0
XA18BATT_DATA_IN
OPT_SEL2
RAM_CSFLASH_EN
F1200Vddd
HS
IO
FLA
SH
_OE
DA
TA
SY
N
LSIO
SQ
_DE
TC
HA
CT
MIS
O
R40910K10K
R457
TP401TEST_POINT
11
TP402TEST_POINT
SCI_RXSCI_TX
0R418
390nHL411
L410390nH
R437NU
470pFC449
470pFC423C431
470pFC453470pF
C730470pF
Vddd
N.U
.
CSGP4CSGP3
N.U.
N.U
.N
.U.
N.U.
N.U
.
VST
N.U.
N.U.
5102226J56
N.U.V
SS
R87
93X
FC
XIRQ48
91X
TA
L
VD
D12
VD
DL
39V
DD
R88
VD
DS
YN
92
VR
H69
VR
L68
VS
S13
VS
SL
40
PJ1_CSGP472
PJ273
PJ374
PJ475
PJ576
PJ677
PJ778
RESET94
PI1
55P
I254
PI3
53P
I452
PI5
51P
I650
PI7
49
PJ0_CSGP371
PH1_PW246
PH2_PW345
PH3_PW444
PH4_CSIO43
PH5_CSGP142
PH6_CSGP241
PH7_CSPROG38
PI0
56
PG1_XA1416
PG2_XA1520
PG3_XA1619
PG4_XA1717
PG5_XA1818
PG6_AS5
PG7_R_W4
PH0_PW147
PF
2_A
DD
R2
27P
F3_
AD
DR
326
PF
4_A
DD
R4
25P
F5_
AD
DR
524
PF
6_A
DD
R6
23P
F7_
AD
DR
722
PF
O_A
DD
R0
29PG0_XA13
6
66PE1_AN1
65PE2_AN2
64PE3_AN3
63PE4_AN4
62PE5_AN5
61PE6_AN6
60PE7_AN7
PF
1_A
DD
R1
28
PD
0_R
XD
97P
D1_
TX
D98
PD
2_M
ISO
99P
D3_
MO
SI
100
PD
4_S
CK
1P
D5_
SS
23P
D6_
LVIN
67PE0_AN0
PC0_DATA030
PC1_DATA131
PC2_DATA232
PC3_DATA333
PC4_DATA434
PC5_DATA535
PC6_DATA636
PC7_DATA737
PB
1_A
DD
R9
10P
B2_
AD
DR
1011
PB
3_A
DD
R11
9P
B4_
AD
DR
1221
PB
5_A
DD
R13
15P
B6_
AD
DR
148
PB
7_A
DD
R15
7
PB
O_A
DD
R8
14
PA
0_IC
379
PA
1_IC
280
PA
2_IC
181
PA
3_IC
4_O
C5_
OC
182
PA
4_O
C4_
OC
183
PA
5_O
C3_
OC
18485
PA
6_O
C2_
OC
1P
A7_
PA
1_O
C1
86
AV
DD
59
AV
SS
70
ECLK89
EX
TA
L90
IRQ96
95LV
OU
T
58MODA_LIR
MODB_VSTBY57
MC68HC11FL0U409
N.U
.
OFF_BATT_DATA_OUT
RESET
RTA1
VOL
RSSIVOX
OPT_SEL1
EMER
LOCK
PTT
R_W
RTA0
RTA2RTA3SB1SB2SB3
1%LOW BATT
1%
180KR414
91KR415
TEST_PTP415
1.01uFC433
470pFC456R411
10K
Vddd
http:/
/www.m
yrad
io168
4-12
ZMY0130784-O
ddd
10KR478
D0D1D2
D4
D6
D3
D5
D7
Contro
.net
A11A10
A1A0
A9A8A7A6A5A4A3A2
A17A16A15A14A13A12
470pFC426
0.1uFC425
Vddd
Used for Trunking only.
CY62256VLL
U405
Not_placed_SRAM
Static R
AM
WE27
D415
D516
D617
D718
D819
OE22
VD
D28
VS
S14
A64
A73
A825
A924
CS20
D111
D212
D313
A1123
A122
A1326
A141
A28
A37
A46
A55
A010
A19
A1021
0.1uFC429
R410100K
FLASH_OE
0R492
R408NU
XA18
FLASH_EN
2311049A59
/6V
R4282.2
10uFC424
V
AT49HLV010U406
0R702
FLASH ROM
GN
D24
VC
C8
D325
D426
D527
D628
D729
EN_CE30
EN_OE32
EN_WE7
A515
A614
A713
A83
A92
D021
D122
D223
A145
A1511
A1610
A1769
A18
A218
A317
A416
A020
A119
A1031
A111
A1212
A134
XA18NURESET
R701
R_W
RAM_CS
ller Memory Schematic Diagram
http:/
/www.m
yrad
io168
4-13
AU
1W68R450
C471470pF
470pFC473470pF
C472
WB+
MMBZ5240B 4880140L15 x 5pcs.
10VVR447
10VVR449
10VVR445
VR44610V
VR44810V
0909059E0420 PIN CONNJ403
4805656W08MMQA5V6T1
VR4335.6V
470pFC490
C492470pF
C493470pF
470pFC491
1KR477
EXT_SPK-
INT_SPK+
NC
BOOT_CTRL
GND
GND
INT_SPK-
EXT_SPK+
OPT_B+
EXT_MIC
OPT_SEL_2
OPT_SEL_1
GND
NC
NC
RX_DATA
TX_DATA
GND
RSSI
RX_AUDIO/TX_AUDIO
GND
MIC
J403-6
J403-19
J403-7
J403-14
J403-15
J403-16
J403-22
J403-17
J403-21
J403-8
J403-3
J403-18
J403-13
J403-12
J403-2
J403-20
J403-10
J403-11
J403-5
J403-4
J403-1
J403-9
Controller Audio Power Amplifier Schematic Diagram
.net
ZMY0130782-O
0.1uFC447
470KR431
36KR424
36KR472
C4480.1uF
DIO
470KR423 R499
10K
10KR498
6SELECT
5SVR
20
VCC1
11
VCC2
NC2 7
NC3 9
NC4 12
NC5 19
18OUT1NEG
3OUT1POS
13OUT2NEG
8OUT2POS
1GN
D1
10GN
D2
17 IN1NEG
16 IN1POS
14 IN2NEG
15 IN2POS
4MODE
NC1 2
TDA8547U420
C47610uF
C4420.1uF
R47310
C47510uF
UNSWB+
SWB+
UMG5
4802245J54
C450NU
2
Q410
R47120K
AUDIO_PA_ENA EXT_SPKR_SEL
6 4
1 3
L401390nH0.1uF
C443
330R434
R4352K
470pFC444
5V
EXT_MIC
470pFC445
(3.3V)
R4360
C4404.7uF
R4212K
Vdda
C441470pF
390nHL400
INT_MIC
FLAT_RX_SND
BOOT_CTRL
SCI_RX
SCI_TX
RSSI
MMQA5V6T14805656W08
VR4325.6V
OPT_SEL2SOPT_SEL1
4880140L15MMBZ5240B
470pFC495 10V
VR450C496470pF
C494470pF
470pFC497
http:/
/www.m
yrad
io168
4-14
Controller Parts List for VHF (for8404051G07/G08))
* Motorola Depot Servicing only
CircuitRef
MotorolaPart No. Description
C400 2113743L41 10000 pF, 10%C401 2113743M24 100000 pF, +80% / -20%C402 2113743M24 100000 pF, +80% / -20%C403 2113928D08 10.0 uFC408 2113743L09 470 pF, 10%C409 2113743M24 100000 pF, +80% / -20%C410 2113928N01 0.1 uF, 10%C411 2113743M24 100000 pF, +80% / -20%C414 2113743M24 100000 pF, +80% / -20%C415 2185895Z01 0.01 uFC416 2113928N01 0.1 uF, 10%C419 NOT PLACEDC420 2113743L41 10000 pF, 10%C421 2113928N01 0.1 uF, 10%C422 2113743M24 100000 pF, +80% / -20%C423 2113743L09 470 pF, 10%C424 2311049A59 10 uF, 10%C425 2113743M24 100000 pF, +80% / -20%C426 2113743L09 470 pF, 10%C427 2113743L09 470 pF, 10%C428 2113743M24 100000 pF, +80% / -20%C429 2113743M24 100000 pF, +80% / -20%C430 2113928N01 0.1 uF, 10%C431 2113743L09 470 pF, 10%C433 2113743L41 10000 pF, 10%C435 2113743M24 100000 pF, +80% / -20%C440 2113743G26 4.7 uF, +80% / -20%C441 2113743L09 470 pF, 10%C442 2113743E20 0.10 uF, 10%C443 2113928N01 0.1 uF, 10%C444 2113743L09 470 pF, 10%C445 2113743L09 470 pF, 10%C447 2113928N01 0.1 uF, 10%C448 2113928N01 0.1 uF, 10%C449 2113743L09 470 pF, 10%C450 NOT PLACEDC451 2113743M08 22000 pF, +80% / -20%C452 2113743B29 1.00 uF, 10%C453 2113743L09 470 pF, 10%C456 2113743L09 470 pF, 10%C471 2113743L09 470 pF, 10%C472 2113743L09 470 pF, 10%C473 2113743L09 470 pF, 10%C475 2113743H14 10.0 uF, +80% / -20%C476 2113928D08 10.0 uFC479 2113928N01 0.1 uF, 10%C480 2113928D08 10.0 uF
C481 2113928N01 0.1 uF, 10%C490 2113743L09 470 pF, 10%C491 2113743L09 470 pF, 10%C492 2113743L09 470 pF, 10%C493 2113743L09 470 pF, 10%C494 2113743L09 470 pF, 10%C495 2113743L09 470 pF, 10%C496 2113743L09 470 pF, 10%C497 2113743L09 470 pF, 10%C701 2113743L09 470 pF, 10%C702 2113743L09 470 pF, 10%C703 2113743L09 470 pF, 10%C704 2113743L09 470 pF, 10%C705 2113743L09 470 pF, 10%C706 2113743L09 470 pF, 10%C707 2113743L09 470 pF, 10%C708 2113743L09 470 pF, 10%C709 2113743L09 470 pF, 10%C710 2113743L09 470 pF, 10%C711 2113743L09 470 pF, 10%C712 2113743L09 470 pF, 10%C713 2113743L09 470 pF, 10%C714 2113743L09 470 pF, 10%C715 2113743L09 470 pF, 10%C716 2113743L09 470 pF, 10%C717 2113743L09 470 pF, 10%C718 2113743L09 470 pF, 10%C719 NOT PLACEDC720 NOT PLACEDC721 2113743L09 470 pF, 10%C722 2113743L09 470 pF, 10%C723 2113743L09 470 pF, 10%C724 2113743L09 470 pF, 10%C725 NOT PLACEDC726 2113743L09 470 pF, 10%C727 2113743L09 470 pF, 10%C728 2113743L09 470 pF, 10%C729 2113743L09 470 pF, 10%C730 2113743L09 470 pF, 10%C731 2113743L09 470 pF, 10%C732 NOT PLACEDC733 NOT PLACEDC734 NOT PLACEDCR412 4802245J62 Diode SchottkyCR413 4802245J62 Diode SchottkyCR440 4813833C02 Dual Diode, Common Cath-
odeJ400 0902042P03 40 Pins ConnectorJ403 0909059E04 20 Pins ConnectorL400 2462587Q42 390 nH, 10%L401 2462587Q42 390 nH, 10%
CircuitRef
MotorolaPart No. Description
L410 2462587Q42 390 nH, 10%L411 2462587Q42 390 nH, 10%Q400 4809579E18 TSTR MOSFETQ403 4813824A17 XSTR PNP 40VQ405 4802245J54 Digital TransistorQ410 4802245J54 Digital TransistorQ417 4809939C05 Transistor Dual NPN / PNPR400 0662057N15 47 k, 5%R406 0662057N20 75 k, 5%R408 NOT PLACEDR409 0662057M98 10 k, 5%R410 0662057N23 100 k, 5%R411 0662057M98 10 k, 5%R413 0662057M01 0, 5%R414 0662057V34 180 k, 1%R415 0662057V26 91 k, 1%R416 0662057M98 10 k, 5%R418 0662057M01 0, 5%R421 0662057M81 2000, 5%R423 0662057N39 470 k, 5%R424 0662057N12 36 k, 5%R425 0662057N10 30 k, 5%R427 0662057M84 2700, 5%R428 0662057M10 2.2, 5%R429 0662057N20 75 k, 5%R431 0662057N39 470 k, 5%R432 0662057N16 51 k, 5%R434 0662057M62 330, 5%R435 0662057M81 2000, 5%R436 0662057M01 0, 5%R437 NOT PLACEDR445 0662057N08 24 k, 5%R447 0662057N23 100 k, 5%R448 0662057M98 10 k, 5%R449 0662057N08 24 k, 5%R450 0683962T45 68R451 0662057N03 15 k, 5%R452 0662057N23 100 k, 5%R453 NOT PLACEDR454 NOT PLACEDR455 NOT PLACEDR456 0662057M01 0, 5%R457 0662057M98 10 k, 5%R460 0662057M90 4700, 5%R463 0662057M61 300, 5%R471 0662057N06 20 k, 5%R472 0662057N12 36 k, 5%R473 0662057M26 10, 5%R475 0662057M01 0, 5%R476 0662057N08 24 k, 5%R477 0662057M74 1000, 5%
CircuitRef
MotorolaPart No. Description
R478 0662057M98 10 k, 5%R481 0662057N08 24 k, 5%R492 0662057M01 0, 5%R498 0662057M98 10 k, 5%R499 0662057M98 10 k, 5%R701 NOT PLACEDR702 0662057M01 0, 5%RT400 0680590Z01 Thermistor 33kSH400 2602001P16 Shield, ControllerTP401 NOT PLACEDTP402 NOT PLACEDTP405 NOT PLACEDTP406 NOT PLACEDTP410 NOT PLACEDTP415 NOT PLACEDU400 5102463J40 3.3V RegulatorU404 5185130C53 ASFIC CMPU405 NOT PLACEDU406 *5102463J60 Flash ROM 512K x 8U407 *5102463J64 EEPROM 16K x 8U409 5102226J56 uP HC11FLOU420 5102463J44 Audio AmplifierVR432 4805656W08 Quad Zener DiodeVR433 4805656W08 Quad Zener DiodeVR445 4880140L15 10V ZenerVR446 4880140L15 10V ZenerVR447 4880140L15 10V ZenerVR448 4880140L15 10V ZenerVR449 4880140L15 10V ZenerVR450 4880140L15 10V Zener
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
.net
4-15
Controller Parts List for UHF 1, UHF 2and 330MHz (for 8404051G07/G08)
* Motorola Depot Servicing only
CircuitRef
MotorolaPart No. Description
C400 2113743L41 0.01uFC400 2113743L41 10000 pF, 10%C401 2113743M24 100000 pF, +80% / -20%C402 2113743M24 100000 pF, +80% / -20%C403 2113928D08 10.0 uFC408 2113743N50 100 pF, 5%C409 2113743M24 100000 pF, +80% / -20%C410 2113928N01 0.1 uF, 10%C411 2113743M24 100000 pF, +80% / -20%C414 2113743M24 100000 pF, +80% / -20%C415 2185895Z01 0.01 uFC416 2113928N01 0.1 uF, 10%C419 NOT PLACEDC420 2113743L41 10000 pF, 10%C421 2113928N01 0.1 uF, 10%C422 2113743M24 100000 pF, +80% / -20%C423 2113743N50 100 pF, 5%C424 2311049A59 10 uF, 10%C425 2113743M24 100000 pF, +80% / -20%C426 2113743N50 100 pF, 5%C427 2113743N50 100 pF, 5%C428 2113743M24 100000 pF, +80% / -20%C429 2113743M24 100000 pF, +80% / -20%C430 2113928N01 0.1 uF, 10%C431 2113743N50 100 pF, 5%C433 2113743L41 10000 pF, 10%C435 2113743M24 100000 pF, +80% / -20%C440 2113743G26 4.7 uF, +80% / -20%C441 2113743N50 100 pF, 5%C442 2113743E20 0.10 uF, 10%C443 2113928N01 0.1 uF, 10%C444 2113743N50 100 pF, 5%C445 2113743N50 100 pF, 5%C447 2113928N01 0.1 uF, 10%C448 2113928N01 0.1 uF, 10%C449 2113743N50 100 pF, 5%C450 NOT PLACEDC451 2113743M08 22000 pF, +80% / -20%C452 2113743B29 1.00 uF, 10%C453 2113743N50 100 pF, 5%C456 2113743N50 100 pF, 5%C471 2113743N50 100 pF, 5%C472 2113743N50 100 pF, 5%C473 2113743N50 100 pF, 5%C475 2113743H14 10.0 uF, +80% / -20%C476 2113928D08 10.0 uFC479 2113928N01 0.1 uF, 10%
C480 2113928D08 10.0 uFC481 2113928N01 0.1 uF, 10%C490 2113743N50 100 pF, 5%C491 2113743N50 100 pF, 5%C492 2113743N50 100 pF, 5%C493 2113743N50 100 pF, 5%C494 2113743N50 100 pF, 5%C495 2113743N50 100 pF, 5%C496 2113743N50 100 pF, 5%C497 2113743N50 100 pF, 5%C701 2113743N50 100 pF, 5%C702 2113743N50 100 pF, 5%C703 2113743N50 100 pF, 5%C704 2113743N50 100 pF, 5%C705 2113743N50 100 pF, 5%C706 2113743N50 100 pF, 5%C707 2113743N50 100 pF, 5%C708 2113743N50 100 pF, 5%C709 2113743N50 100 pF, 5%C710 2113743N50 100 pF, 5%C711 2113743N50 100 pF, 5%C712 2113743N50 100 pF, 5%C713 2113743N50 100 pF, 5%C714 2113743N50 100 pF, 5%C715 2113743N50 100 pF, 5%C716 2113743N50 100 pF, 5%C717 2113743N50 100 pF, 5%C718 2113743N50 100 pF, 5%C719 NOT PLACEDC720 NOT PLACEDC721 2113743N50 100 pF, 5%C722 2113743N50 100 pF, 5%C723 2113743N50 100 pF, 5%C724 2113743N50 100 pF, 5%C725 NOT PLACEDC726 2113743N50 100 pF, 5%C727 2113743N50 100 pF, 5%C728 2113743N50 100 pF, 5%C729 2113743N50 100 pF, 5%C730 2113743N50 100 pF, 5%C731 NOT PLACEDC732 2113743N50 100 pF, 5%C733 NOT PLACEDC734 NOT PLACEDCR412 4802245J62 Diode SchottkyCR413 4802245J62 Diode SchottkyCR440 4813833C02 Dual Diode, Common Cath-
odeJ400 0902042P03 40 Pins ConnectorJ403 0909059E04 20 Pins ConnectorL400 2462587Q42 390 nH, 10%
CircuitRef
MotorolaPart No. Description
L401 2462587Q42 390 nH, 10%L410 2462587Q42 390 nH, 10%L411 2462587Q42 390 nH, 10%Q400 4809579E18 TSTR MOSFETQ403 4813824A17 XSTR PNP 40VQ405 4802245J54 Digital TransistorQ410 4802245J54 Digital TransistorQ417 4809939C05 Transistor Dual NPN / PNPR400 0662057N15 47 k, 5%R406 0662057N20 75 k, 5%R408 NOT PLACEDR409 0662057M98 10 k, 5%R410 0662057N23 100 k, 5%R411 0662057M98 10 k, 5%R413 0662057M01 0 , 5%R414 0662057V34 180 k, 1%R415 0662057V26 91 k, 1%R416 0662057M98 10 k, 5%R418 0662057M01 0 , 5%R421 0662057M81 2000 , 5%R423 0662057N39 470 k, 5%R424 0662057N12 36 k, 5%R425 0662057N10 30 k, 5%R427 0662057M84 2700 , 5%R428 0662057M10 2.2 , 5%R429 0662057N20 75 k, 5%R431 0662057N39 470 k, 5%R432 0662057N16 51 k, 5%R434 0662057M62 330 , 5%R435 0662057M81 2000 , 5%R436 0662057M01 0 , 5%R437 NOT PLACEDR445 0662057N08 24 k, 5%R447 0662057N23 100 k, 5%R448 0662057M98 10 k, 5%R449 0662057N08 24 k, 5%R450 0683962T45 68R451 0662057N03 15 k, 5%R452 0662057N23 100 k, 5%R453 NOT PLACEDR454 NOT PLACEDR455 NOT PLACEDR456 0662057M01 0 , 5%R457 0662057M98 10 k, 5%R460 0662057M90 4700 , 5%R463 0662057M61 300 , 5%R471 0662057N06 20 k, 5%R472 0662057N12 36 k, 5%R473 0662057M26 10 , 5%R475 0662057M01 0 , 5%R476 0662057N08 24 k, 5%
CircuitRef
MotorolaPart No. Description
R477 0662057M74 1000 , 5%R478 0662057M98 10 k, 5%R481 0662057N08 24 k, 5%R492 0662057M01 0 , 5%R498 0662057M98 10 k, 5%R499 0662057M98 10 k, 5%R701 NOT PLACEDR702 0662057M01 0 , 5%RT400 0680590Z01 Thermistor 33kSH400 2602001P16 Shield, ControllerU400 5102463J40 3.3V RegulatorU404 5185130C53 ASFIC CMPU405 NOT PLACEDU406 *5102463J60 Flash ROM 512K x 8U407 *5102463J64 EEPROM 16K x 8U409 5102226J56 Microprocessor ICU420 5102463J44 Audio AmplifierVR432 4805656W08 Quad Zener DiodeVR433 4805656W08 Quad Zener DiodeVR445 4880140L15 10V ZenerVR446 4880140L15 10V ZenerVR447 4880140L15 10V ZenerVR448 4880140L15 10V ZenerVR449 4880140L15 10V ZenerVR450 4880140L15 10V Zener
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
.net
4-16
3.7
M606
M609
M612
M615
M618
M621
Contro
.net
Controller Board Diagrams
ZMY0130800-O
D601
M604 M605
M607 M608
R620
D604
M610
M613
R618
D603
M616
M619
R622
TP402TP406 TP410
D602
R621
D605
M611
M614
R619
D606
M617
M620
R623
TP401 TP405 TP415
ller Board Top View (PCB No. 8404056G01)
http:/
/www.m
yrad
io168
4-17
1
2
8
1
7
8
9
0
C433
C453
C609
C610
R414
R415
R432
R611
R612
R613
RT400
U602
51
76
C434
C423
C436
C437
3
Q405
R416
R420
R426
C400
C401
C402
406
R406
R476
8 5
4
U400
C703
C704
C705
C706
C713
40
Controller Board Bottom View (PCB No.8404056G01)
.net
ZMY0130801-O
C429
C750
C424
C751
R408 R478
R492
R428
1
E400
E634
E637
E638 E639 E640
E641 E642
E643 E644
E645
E702E703
R410 R632
R463
C613
J702
181
C616
E704
Q601
Q602
R649
R633
R646
R648
R411
R647CR413
Q603
C431
R409R457C456
C61
C61
R437 R41
R60R602
R603R60
R604R60
R605 R60
R606 R61
L410 L411
R721
R722
U406
1617
32
C428
C427
R429
8 5
41
U407
U405 1
78
21 22
C447
C448
34
R498
R499
R423
R431
R424
R472
U420
10
20 1
11
C420
C422
C419
C450
C472
C416
C481Q410 R
400
R413
R471
R481
C409
C479
C408
R425
13
2537
1
U404
C411 C414
C476 C405
C410
C443
C440
C442
C452
C475
R475
R473
VR446VR448VR449VR450
C444
C445
C430
C415
C451
L400
L401
Q4173 4
R447
R454
R455
R436
R456
R421
R435
R434
C425
C426
C449
C421
U409
26
1
C435
C480
C730
FL401
Q400
Q416
3
4R462
R460
R461
C403
C
CR411CR412
CR440
Q403
R452
R453
R448 R419 R427
R451
U410
R450
C471
C701
C702
C707
C708
C709
C710
C711
C712
C714
C715
C716
C717
C718
C721
C722
C723
C724
C726
C727
C728
C729
C731
1
J400
C441 C473
C490
C491
C492
C493
C494
C495
C496
C497
R477
g2 g1
1
J403
20
VR432VR433VR445 VR447
http:/
/www.m
yrad
io168
4-18
Contro
.net
D60
1
D60
2
D60
3D
604
D60
5D
606
M60
4
M60
5
M60
6
M60
7
M60
8
M60
9
M61
0
M61
1
M61
2
M61
3
M61
4
M61
5
M61
6
M61
7
M61
8
M61
9
M62
0
M62
1
R61
8
R61
9
R62
0
R62
1
R62
2
R62
3TP401TP402 TP405TP406 TP410 TP415
ller Board Top View (PCB No. 8404056G02)
http:/
/www.m
yrad
io168
4-19
C610C611
E701
C60
9
R61
1
R61
2
R61
3C612
R418
R601
R607
R608
R609
R610
U60
2C
433
R41
4
R41
5
R43
2
RT400
6
7
2
3
4
5
6
C453
76
C42
3
C437
R42
6
51C
434
C436
3
FL4
01
43
Q405
R41
6R
420
C40
1
403
C406
CR
412 R40
6
427
C40
0
C40
2
R47
6
4
58U400
C70
3
C70
4
C70
5
C70
6
C71
2
C71
340
Controller Board Bottom View (PCB No. 8404056G02)
.net
C42
4
C429
R408R428
R47
8R492
C750
C751 E40
1
C613
E40
0
E402 E403
E404 E405
E406 E407
E408 E409 E634
E637
E638 E639 E640
E641 E642
E643 E644
E645
E702E703
R410
R463
R632
1
18
J702
C45
R43
R60
R60
R60
R60
R60
C616
E704
Q60
1Q
602
R411
R633
R646
R647
R648
R64
9
C431
CR
413
Q60
3
R409R457
321716
1
U406
L410 L411
R721
R72
2C
427
C42
8R
429
14
58
U407
218
U40
5
227
1
C42
5
C42
6C
449
1
U40
9
Q40
0
C435R460
R461
R462C480
C730
Q416
26
C415
C43
0
C45
1
43Q41
7R
421
R43
4
R43
6
R455
25
13
U404
C41
6
C41
9
C42
0
C42
1
C42
2
R40
0
R41
3
C40
8C
409
C450
C47
2C
479
C481
43
Q410
R42
5
R471
R48
1
1
37
C44
7
C44
8
C475C476
R42
3
R42
4
R43
1
R47
2
R498
R499
11
120
10
U42
0
C40
5
C41
0
C41
1 C414C442 C
443R473
R475
VR446VR448VR449
VR
432
VR
433
VR445
VR450
C44
0 C44
4
C45
2 L400
L401R43
5
R450VR447
C44
5 CR
440
Q40
3
R447
R44
8R
451R
452
R453
R454
R45
6
C
CR
411
R419 R
U41
0
C47
1
C70
1
C70
2
C70
7
C70
8
C70
9
C71
0
C71
1
C71
4
C71
5
C71
6
C71
7
C71
8
C72
1
C72
2
C72
3
C72
4
C72
6
C72
7
C72
8
C72
9
C73
1
C47
3
C44
1
C49
0
C49
1
C49
2
C49
3
C49
4
C49
5
C49
6
C49
7
R47
7
20
g2 J403
1
g1
1
J400
http:/
/www.m
yrad
io168
4-20
3.8
ZMY0130816-O
SC
I_R
X
SC
I_T
X
SW
B+
UN
SW
B+
Vdd
a
5V
AU
DIO
AU
DIO
_PA
_EN
A
BO
OT
_CT
RL
EX
T_M
IC
EX
T_S
PK
R_S
EL
FLA
T_R
X_S
ND
INT
_MIC
OP
T_S
EL1
OP
T_S
EL2
RS
SI
RTA2
RTA3
SB1
SB2
SB3
VOL
5V
RS
SI
Vdd
a
KEYPAD_COL
KEYPAD_ROW
LI_ION
MECH_SWB+
RTA0
RTA1
AUDIO_PA
MARKER
UHF(470pF) (100pF)VHF
C751
100pF
C750
470pF
Comple
.net
Controller Schematics (for 8404056G01)
SB2
UNSWB+
RTA1RTA0EMER
GREEN_LED
5V
GNDGND
LOCKCLK
N.U.
RTA2
UNSWB+UNSWB+
GND
CSX
MECH_SWB+RTA3
SB3
SB1
GND
0902042P03
RSSI
DACRx
SWB+
GND
LVZIF_SEL
RED_LED
N.U.
VOL
N.U.
DATAMODIN
LI_ION
GND
RESET
J400
GND
SWB+
PTT
16.8MHz
TO/FROM RF
N.U.
BATT_CODE
Vdda
DEMOD
J400-2
C706100pF 100pF
C704
100pFC703
J400-42
J400-24
J400-3
J400-11
J400-21
C712
J400-5
100pF100pFC710
100pFC718
J400-16
100pFC729
J400-6
100pF
J400-4
J400-19
C705
J400-23
J400-12J400-26
J400-28J400-27
J400-30J400-29
J400-15
100pFC707
VO
X
VS_AUDSEL
VS_GAINSEL
Vdda
Vddd
LED
BL
LSIO
ME
CH
_SW
B+
MIS
O
MO
DIN
OF
F_B
AT
T_D
AT
A_O
UT
RE
D_L
ED
RE
SE
T
RX
_AU
D_R
TN
SQ
_DE
T
SW
B+
SY
N
TX
_AU
D_R
TN
TX
_AU
D_S
ND
UN
SW
B+
UR
X_S
ND
CH
AC
T
CLK
CS
X
DACRX
DA
TA
DEMOD
EE
_CS
EXT_MIC
EXT_SPKR_SEL
F12
00
FLAT_RX_SND
FLA
T_T
X_R
TN
GR
EE
N_L
ED
HS
IO
INT
_EX
T_V
dd
INT_MIC
VOL
VO
X
VS_CS
VS
_IN
T
VS_RAC
Vddd
XA18
16.8
MH
z
4V_3.3V
5V
AUDIO
AUDIO_PA_ENA
BA
TT
_CO
DE
BA
TT
_DA
TA
_IN
RE
SE
T
RSSI
RTA0
RTA1
RTA2
RTA3
R_W
SB1
SB2
SB3
SCI_RX
SCI_TX
SQ
_DE
T
SW
B+
SY
N
UN
SW
B+
KEYPAD_ROW
KE
Y_I
NT
LCD_SEL
LI_ION
LOC
K
LSIO
LVZIF_SEL
MECH_SWB+
MIS
O
OFF_BATT_DATA_OUT
OPT_ENA
OPT_SEL1
OPT_SEL2
PT
T
RAM_CS
RDY
D0D1D2D3D4D5D6D7
DA
TA
EE
_CS
EM
ER
F12
00
FLASH_EN
FLASH_OE
HS
IO
KEYPAD_COL
A15A16A17
A2A3A4A5A6A7A8A9
BA
TT
_DA
TA
_IN
BOOT_CTRL
CH
AC
T
CLK
CS
X
A0A1
A10A11A12A13A14
J400-38
J400-9
C727100pF
100pFC708
C724100pF
J400-14
J400-39
J400-41
J400-1
J400-25
C716100pF
100pFC711 C709
100pF
C721
J400-34
J400-35
100pF
J400-36
J400-13C723100pF
100pFC722
D3D4D5D6D7
FLA
SH
_EN
FLA
SH
_OE
RA
M_C
S
RESET
R_W
Vdd
d
XA
18
J400-37
A13A14A15A16A17
A2A3A4A5A6A7A8A9
D0D1D2
J400-20
A0A1
A10A11A12
J400-17
J400-8
J400-40
C728100pF
100pF
J400-18
C702
C715
J400-7
100pF
100pFC731
J400-32
C713100pF
J400-33
J400-22J400-10
J400-31
VS_INT
VS_RAC
Vddd
C701100pF
LEDBL
MISO
OFF_BATT_DATA_OUT
OPT_ENA
PTT
RDY
RESET
RX_AUD_RTN
R_W
SWB+
TX_AUD_RTNTX_AUD_SND
URX_SNDON
VS_AUDSEL
VS_CS
VS_GAINSEL
D1D2D3D4D5D6D7
DATA
EXT_MIC
FLAT_RX_SND
FLAT_TX_RTN
INT_EXT_Vdd
KEYPAD_COLKEYPAD_ROW
KEY_INT
LCD_SEL
C717
A0CLK
D0
C726
100pF
100pF
100pF
DATA
KEY_INT
RESET
LCD_SEL
LEDBL
C714
RESET
SWB+Vddd
KEYPAD_ROWKEYPAD_COL
CLK
Vddd
BATT_CODELI_ION
RTA2
VOL
SB1
SB3
RTA0
RTA3
5VVddaRESET
EMER
CSXDACRx
DATAMODIN
SWB+LVZIF_SELPTT
GREEN_LEDRED_LED
RTA1
16.8MHz
DEMOD
LOCK
MECH_SWB+
RSSI
SB2
UNSWB+
CLKDACRX
DEMOD
16.8
MH
z
BA
TT
_CO
DE
GR
EE
N_L
ED
LED
BL
MO
DIN
RE
D_L
ED
SWB+
UNSWB+
CLK
CSX
DATA
EM
ER
KE
Y_I
NT
LOC
K
PT
T
LVZIF_SEL
LCD_SEL
MICRO_P
MEMORY
ASFIC
INTERFACE
te Controller Schematic Diagram
http:/
/www.m
yrad
io168
4-21
UMG5
RB731U
4802245J62
4809579E18
MMBD6100LT1
4813833C02
4802245J54
BCX71KL
1
K2K3
CR412
A1A2A3
K1
1
23
CR440 R41610K
3
1
2
10uFC403
Q400
F
R4272.7K
1 3
Q405
2
4
75KR406
OFF_BATT_DATA_OUT
BATT_DATA_IN
BATT_CODEVddd
UNSWB+
Controller ASFIC/ON_OFF Schematic Diagram
.net
ZMY0130817-O
(3.3V)
NU
NU
ASFIC CMP5185130C53
MMBT3906L
4813824A17
NU
EEPROM
NU
(3.3V)
(3.3V)
R45
15K
R448
10K
100K
R447
0.1uFC421
100KR454C480
10uF
R452
100K
47KR400
0.1uF
C479
R453100K
R42910K
0.1uFC416
R4130
TP4061
C4140.1uF
0.1uFC401
.01uF
0.01uF
C420
3WP
C415
1CS
7HOLD
6SCK
5SI
2SO
8V
CC
4V
SS
C4090.1uF
X25128-2.7U407
0.1uFC422
R42530K
0.1uC402
1
.022uFC451
0
TP410
R475
C400
100KR455
0.1uF
.01uF
C411
0.1uF
100pF
C410
C427
C4060.1uF
C408100pF
C4521uF
0.1uF
R481
24K
C481
24KR476
VDDA1
VDDCP32VDDD33
VDDDAC11
VD
DR
C45
VDDSYN27
VOX7
39R
XS
ND
12 SQCAP
SQ
DE
T17
SQIN9 SYN28
TXRTN36T
XS
ND
44
UIO10
LSIO
18
MIC
EX
T48
MIC
INT
46
MO
D40
NC26
PLCAP8
PLCAP225
43R
XR
TN
GC
B5
38
GNDA3
GNDD3130
GNDDO
GN
DR
C47
GN
DS
YN
23
HS
IO19
LCA
P24
DA
TA
22
DISC2
F120029
GC
B0
15G
CB
114
GC
B2
13
GCB335
GC
B4
3742A
UX
TN
CH
AC
T16
CLK
21
CLK16834
CS
X20
DACG6DACR5DACU4
Q403
30C53U404
AU
DIO
41
SENSE 2SHUTDOWN3VTAP 6
U400LP2951ACMM-3.3
ERROR 5FEEDBACK7
GN
D4
INPUT8 OUTPUT 1
C405
100pF
R456
0
0.1uFC430
FN1,
C419100pF
C4280.1uF
DEMOD
MISO
Vddd
Vddd
MECH_SWB+
Vdda Vdda
CS
X
CH
AC
TS
Q_D
ET
LSIO
HS
IO
5V
Vdda
SYNF1200
DA
TA
CLK
EE_CS
VOX
RESET
MO
DIN
Vdda
AU
DIO
16.8MHzDACRx
EX
T_S
PK
R_S
EL
AU
DIO
_PA
_EN
AG
RE
EN
_LE
D
RED_LEDLE
DB
L
EX
T_M
IC
FLAT_RX_SND
SWB+
INT
_MIC
8K x 8 EEPROM
http:/
/www.m
yrad
io168
4-22
ZMY0130818-O
UNSWB+ SWB+
LI_ION
BOOT_CTRL
CR413
590Z01 UMC5N
RB731U
4802245J62
RB731U
4802245J50
809579E18
3.3V
4802245J62
BCX71KL
R461180
R4604.7K
A1A2A3
K1K2K3
CR411
Q417
2
6
4
1
3
C4340.1uF
0.1uFC435
R419
R462
510
10K
U410ILC7062CM-33
VIN2
VOUT3
VS
S1
R463300
TP405TEST_POINT
1
Q416
3
1
2
A1A2A3
K1K2K3
B+
Vddd
UNSWB+
47K
4.7K
10K
47K
Contro
.net
,
F1200
TEST_POINTTP402
0680
THERM
5102226J56
CSGP3CSGP4
4870368G0238.4kHz
4
1%
NU
1%LOW BATT
VST
R426330K
100pFC453
C456100pF
C423100pF
93
48XIRQ
XT
AL
91
VD
DL
88V
DD
R
92V
DD
SY
N
69V
RH
68V
RL
13V
SS
40V
SS
L
87V
SS
R
XF
C
PJ274PJ375PJ476PJ577PJ678PJ7
94RESET
12V
DD
39
PI2
53P
I3
52P
I4
51P
I5
50P
I6
49P
I771PJ0_CSGP372PJ1_CSGP473
PH2_PW344
PH3_PW443PH4_CSIO42PH5_CSGP141PH6_CSGP238PH7_CSPROG
56P
I0
55P
I1
54
PG2_XA1519
PG3_XA1617PG4_XA1718PG5_XA185PG6_AS
4PG7_R_W
47PH0_PW1
46PH1_PW2
45
PF
3_A
DD
R3
25P
F4_
AD
DR
4
24P
F5_
AD
DR
5
23P
F6_
AD
DR
6
22P
F7_
AD
DR
7
29P
FO
_AD
DR
0
6PG0_XA13
16PG1_XA14
20
65PE3_AN3 64PE4_AN4 63PE5_AN5 62PE6_AN6 61PE7_AN7 60
28P
F1_
AD
DR
1
27P
F2_
AD
DR
2
26
PD
1_T
XD
99P
D2_
MIS
O
100
PD
3_M
OS
I
1P
D4_
SC
K
2P
D5_
SS
PD
6_LV
IN3
PE0_AN0 67PE1_AN1 66PE2_AN2
PC1_DATA132PC2_DATA233PC3_DATA334PC4_DATA435PC5_DATA5
36PC6_DATA6
37PC7_DATA7
97P
D0_
RX
D
98
PB
2_A
DD
R10
9P
B3_
AD
DR
11
21P
B4_
AD
DR
12
15P
B5_
AD
DR
13
8P
B6_
AD
DR
14
7P
B7_
AD
DR
15
14P
BO
_AD
DR
8
30PC0_DATA0
31
PA
1_IC
2
81P
A2_
IC1
82P
A3_
IC4_
OC
5_O
C1
83P
A4_
OC
4_O
C1
84P
A5_
OC
3_O
C1
PA
6_O
C2_
OC
18586
PA
7_P
A1_
OC
1
10P
B1_
AD
DR
9
11
AV
SS
89ECLK
90E
XT
AL
96IRQLVO
UT
95
MODA_LIR 5857MODB_VSTBY
79P
A0_
IC3
80
U409MC68HC11FL0
59A
VD
D
70
33.0KRT400
R457 R40910K 10K
22pFC436
GND2
IN1
OU
T3
R43251K
XTALFL401
C43722pF
L411390nH
10MEG
C433
R420
.01uF
10KR411
TEST_POINTTP401
1
L410390nH
100pFC431
R414180K
R41591K TP415
TEST_POINT1
100KR437
R418
FN1
100pF
0
C449
1
100pFC730
A1
D0D1D2D3D4D5D6D7
HS
IO
Vddd
DA
TA
Vddd
A17A16A15A14A13A12A11A10A9A8A7A6A5A4A3A2
RTA2RTA3SB1SB2SB3OFF_BATT_DATA_OUT
RESET
Vddd
Mech_SW
RTA1
VOL
RSSIVOXKEYPAD_COLKEYPAD_ROW
OPT_SEL1
CLK
Vddd
FLA
SH
_OE
EMER
LVZIF_SEL
LCD_SEL
SY
N
KEY_INT
LOCK
PTT
LSIO
SQ
_DE
TC
HA
CT
SCI_RXSCI_TX
MIS
O
CSXEE_CS
A0
XA18BATT_DATA_IN
R_WOPT_SEL2
RAM_CSFLASH_EN
RTA0
ller Micro Processor Schematic Diagram
http:/
/www.m
yrad
io168
4-23
ZMY0130819-O
R47810K
Vddd
D0
D2
D4
D6
D7
D5
D3
D1
Controller Memory Schematic Diagram
.net
Vddd
0.1uFC425C426
100pF
CY62256VLL
Used for Trunking only.
NU
11
U4055102463J36
Sta
tic R
AM
D415
D516
D617
D718
D819
VD
D28
A64
A73
A825
A924
D1
D212
D313
A1123
A122
A1326
A141
A28
A37
A46
A55
A010
A19
A1021
WE27
OE22
VS
S14
CS20
FLASH_OE R4282.2
/6V2311049A59
C42410uF
0.1uFC429
A10
A0
A1
A11
A13
A3
A5
A7
A9
A8
A6
A4
A2
A17
A16
A15
A14
A12
R_W
RAM_CS
NU
0R492
R408100K
XA18
FLASH_EN
5102463J59AT49HLV010U406
VC
C8
EN_CE30
EN_OE32
EN_WE7
20
FLA
SH
RO
M
D729
A92
D021
D122
D223
D325
D426
D527
D628
A218
A317
A416
A515
A614
A713
A83
A1031
1
A0
A119
9A18
A11
A1212
A134
A145
A1511
A1610
A176
GN
D24
XA18
R410100K
http:/
/www.m
yrad
io168
4-24
ZMY0130820-O
100pFC473
100pFC471
100pFC472
MMQA5V6T14805656W08
VR4335.6V
C491100pF
C493100pF
100pFC492
C490100pF
VR44510V
VR44810V10V
VR44710VVR449VR446
10V
20 PIN CONNJ403
4880140L15 x 5pcs.
0909059E04
GND
RSSI
GND
INT_SPK-
EXT_SPK+
OPT_SEL_1
RX_DATA
TX_DATA
RX_AUDIO/TX_AUDIO
BOOT_CTRL
GND
GND
INT_SPK+
NC
GND
MIC
EXT_SPK-
OPT_B+
EXT_MIC
OPT_SEL_2
J403-5
J403-4
J403-8
J403-15
J403-14
J403-18
J403-9
J403-6
J403-16
J403-19
J403-10
J403-3
J403-1
J403-13
J403-7
J403-12
J403-2
J403-17
J403-20
J403-11
1KR477
MMBZ5240B
Contro
.net
AUDIO
R42436K
470KR431
0.1uFC448
C4470.1uF 36K
R472
R49910K470K
R423
R49810K
5
6
1716
1415
4
5102463J44
TDA8547U420
SVRV
CC
1
VC
C2
NC39
NC412
NC519
18OUT1NEG
3OUT1POS
13OUT2NEG
8OUT2POS
SELECT
10G
ND
2
IN1NEGIN1POS
IN2NEGIN2POS
MODE
NC12
NC27
1G
ND
1
20 11
C47610uF
C47510uF
UNSWB+
NU 20KR471100pF
C450
SWB+
UMG5
4802245J54
Q410
2AUDIO_PA_ENA EXT_SPKR_SEL
6 4
1 3MMQA5V6T14805656W08
VR4325.6V
(3.3V)
100pFC441
R4360 390nH
L400
C4404.7uF
R4212K
Vdda
INT_MIC
5V
EXT_MIC
R4352K
330R434
0.1uFC443 L401
390nH
100pFC444
C445100pF
BOOT_CTRL
FLAT_RX_SND
SCI_RX
SCI_TX
RSSI
R47310
C4420.1uF
OPT_SEL2OPT_SEL1
1W
68R450
SWB+
100pFC496
C497100pF
100pFC495
C494100pF
10VVR450
4880140L15MMBZ5240B
ller Audio Power Amplifier Schematic Diagram
http:/
/www.m
yrad
io168
4-25
,
>
3
#
5
-
6
2
P1
1
- +
4
87
0
P3P2
9
FN03 GND
4 IN
1 OUT1
2 OUT2
4 IN
1 OUT1
2 OUT2
SWITCHM610
SWITCHM618
FN0 3 GND
FN03 GND
4 IN
1 OUT1
2 OUT2
M611SWITCH
FN03 GND
4 IN
1 OUT1
2 OUT2
SWITCHM612
SWITCH
GND3
IN4
OUT11
OUT22
3 GND
4 IN
1 OUT1
2 OUT2
M605
IN
1 OUT1
2 OUT2
SWITCHM604
M621SWITCH
FN0 3 GND
4
4 IN
1 OUT1
2 OUT2
M613SWITCH
FN03 GND
M609SWITCH
FN03 GND
4 IN
1 OUT1
2 OUT2
2 OUT2
SWITCHM606
3 GND
4 IN
1 OUT1
OUT1
2 OUT2
M615SWITCH
FN03 GND
4 IN
1
FN0 3 GND
4 IN
OUT1
2 OUT2FN0
3 GND
4 IN
1 OUT1
2 OUT2
SWITCHM608
1 OUT1
2 OUT2
M607SWITCH
M619SWITCH
FN0 3 GND
4 IN
1 OUT1
2 OUT2
SWITCHM614
FN03 GND
4 IN
4 IN
1 OUT1
2 OUT2
SWITCHM616
FN03 GND
M617SWITCH
FN03 GND
4 IN
1 OUT1
2 OUT2
4 IN
1 OUT1
2 OUT2
SWITCHM620
FN0 3 GND
ROW3
ROW2
OL5
ROW5ROW4
ROW5
COL3
KEYPAD_ROW
ROW3
ROW4
COL2AD_COL
1
*
Controller Interface Schematic Diagram (for 8404056G01)
.net
ZMY0130821-O
MMBT3906L
D0
5102463J49
4813824A10
A0
SW_B+
Gnd
,1%
4813824A17
MMBT3904L
4813824A10
,1%
RST*
,1% ,1%
CS*
,1%
J702
MMBT3904L
LED for backlight.
LED_EN
R/W*
4880479U01 x 6pcs.
D2
D5D6D7
SCK
KEYPAD 3 x 6
Vdd
P/N.0905505Y03
MOSI
NUNU
,1%,1%
16 PINS CONNECTOR
D4
For LCD module
,1%
D1
,1%
,1%
NU
D3
R646100K
51KR602
1KR622
13KR603
R61151K
E63
4B
K10
05H
M47
1
E63
7
BK
1005
HM
471
E70
2
BK
1005
HM
471
E63
8
BK
1005
HM
471
100KR633
R606130K
R632100K
E70
3B
K10
05H
M47
1
R6231K1K
Q603
R620
NPN
E64
3B
K10
05H
M47
1
BK
1005
HM
471
E64
4
J702-4
47K
100KR648
R649
J702-5
R6211K
R60151K
J702-12
J702-3
R60422K
C610100pF
BK
1005
HM
471
E64
0
R60943K
J702-7
R6131MEG
BK
1005
HM
471
E64
2
100pFC616
79U01D606
1KR6181K
R619
100K
R722100K
R721
R6473K
J702-2
J702-9
J702-15
79U01D604
Q601PNP
D60179U01
D60579U01 79U01
D602
J702-1
J702-11
D60379U01
J702-10
J702-13
4
31
2
5
LMC7211U602
E400
C613100pF
R610130K
100pF
J702-8
J702-17
C612E
641
BK
1005
HM
471
22KR608
J702-16
E64
5B
K10
05H
M47
1
R60713K
J702-18
BK
1005
HM
471
E70
4
560KR612
E63
9B
K10
05H
M47
1
Q602NPN
43KR605
, FN0
J702-14
C609100pF
100pFC611
D7D6
J702-6
CLK CLK
LCD_SEL
KEYPAD_ROW
KEYPAD_ROW
KEYPAD_COL
KEYPAD_COLKEY_INT
SWB+
D2
D4
D0D1
D3
D5
A0
LEDBL
DATACLK
DATA DATA
C
COL5
Vddd
RESET
ROW2
COL2
ROW3 ROW4 ROW5
KEYP
COL3
http:/
/www.m
yrad
io168
4-26
Q603NPN
130K
LEDBLRESET
ROW2
A0
Vddd
ROW3
47KR649
OUT11
OUT22
R648
E403
GND3
IN4
OUT11
OUT22
D60679U01
DATA
CLK
DATA DATA
KEYPAD_ROWKEYPAD_COL
KEYPAD_ROW
KEYPAD_COL
LCD_SEL
CLK CLK
BK
1005
HM
471
E63
4
KEY_INT
SWB+
E404
E405
Q601
PNP
FN0,
J702-9
#
54
87
D3
D2
D5
D6
D7
SCK
KEYPAD 3 x 6
MOSI
NUNU
- +
,1%
5102463J49
A0
SW_B+
Gnd
,1%
D1
,1%4880479U01 x 6pcs.
* 0
,1%
P3P2
NU
9
P1
Vdd
P/N.0905505Y03
1 2
,1%
RST*
,1% ,1%
CS*
,1%
,1%
16 PINS CONNECTOR
D4
For LCD module
MMBT3904L
LED for backlight.
LED_EN
R/W*
MMBT3906L
3
D0
,1%
4813824A17
>-
6
4813824A10
J702
GND3
IN4
OUT11
OUT22
E64
4B
K10
05H
M47
1
FN0,
SWITCHM611
BK
1005
HM
471
E64
3
J702-4
1KR621
J702-5
J702-3
E409
R601
3 GND
4 IN
1 OUT1
2 OUT2
51K
M604SWITCH
GND3
IN4
OUT11
OUT22
SWITCHM605
GND3
IN4
OUT11
OUT22
FN0,
SWITCHM621
E408
J702-12
22K
R604
IN4
OUT11
OUT22
FN0,
SWITCHM613
GND3
100pFC610
GND3
IN4
OUT11
OUT22
FN0,
SWITCHM609
4
OUT11
OUT22
R60251K
,
M610SWITCH
GND3
IN
M618SWITCH
GND3
IN4
OUT11
OUT22
FN0
1K
FN0,
R622
R603
13K
FN0,
M614SWITCH
51KR611
E63
7B
K10
05H
M47
1
E70
2B
K10
05H
M47
1
E63
8B
K10
05H
M47
1
E407
130K
R606
1
OUT22
M612SWITCH
GND3
IN4
OUT1
BK
1005
HM
471
E70
3
E70
4B
K10
05H
M47
1
J702-18
OUT22
R612560K
M620SWITCH
GND3
IN4
OUT11
BK
1005
HM
471
E63
9
FN0,
43K
R605
J702-14
100pFC609
100pF
FN0,
C611
J702-8
J702-6
100pFC612
J702-17
43K
R609
M606SWITCH
GND3
IN4
OUT11
OUT22
3KR647
U602LMC7211
1
2
5
GND3
IN4
OUT11
OUT22
FN0,
SWITCHM615
E400
GND3
IN4
OUT11
OUT22
100pF
C613
OUT11
OUT22
FN0,
M608SWITCHSWITCH
M607
GND3
IN4
GND3
IN4
OUT11
OUT22
FN0,
R610
FN0,
SWITCHM619
E64
0B
K10
05H
M47
1
BK
1005
HM
471
E70
1
J702-7
1MEGR613
E64
2B
K10
05H
M47
1
J702-16
BK
1005
HM
471
E64
1
R608
22K
BK
1005
HM
471
E64
5
1KR618
1KR619
100K
M616SWITCH
GND3
IN4
FN0,
13K
R607
79U01D605
79U01D601 D602
79U01
1
OUT22
SWITCHM617
GND3
IN4
OUT1
J702-13
FN0,
100K
J702-10
100K
R722
R721
J702-2
J702-1
D60479U01
J702-15
E401
1KR623
1KR620
E402
E406
79U01D603
J702-11
COL5
COL5
ROW5ROW4
D0
D1
D2
D6
D3
D5
D4
D7
ROW2
COL2
ROW3 ROW4 ROW5
ROW5
COL3
KEYPAD_ROW
ROW3
ROW4
COL2KEYPAD_COL
COL3
4
3
4813824A10MMBT3904L
100KR646
R633100K
100KR632
NPNQ602
C616100pF
Controller Interface Schematic Diagram (for 8404056G02)
http:/
/www.m
yrad
io168
.net
4-27
Con8404
CircR
C400C401C402C403C405C406C408C409C410C411C414C415C416C419C420C421C422C423C424C425C426C427C428C429C430C431C433C434C435C436C437C440C441C442C443C444C445C447C448C449C450C451C452C453C456C471C472
Schottkyiode, Common Cath-
able Clock Osc X’tals Connectors ConnectorZIF HorizontalH, 10%H, 10%H, 10%H, 10%
Description
M614 NOT PLACEDM615 NOT PLACEDM616 NOT PLACEDM617 NOT PLACEDM618 NOT PLACEDM619 NOT PLACEDM620 NOT PLACEDM621 NOT PLACEDQ400 4809579E18 TSTR MOSFETQ403 4813824A17 XSTR PNP 40VQ405 4802245J54 Digital TransistorQ410 4802245J54 Digital TransistorQ416 4809579E18 TSTR MOSFETQ417 4809939C05 Transistor Dual NPN / PNPQ601 4813824A17 XSTR PNP 40VQ602 4813824A10 Transistor NPNQ603 4813824A10 Transistor NPNR400 0662057N15 47 k, 5%R406 0662057N20 75 k, 5%R408 NOT PLACEDR409 0662057M98 10 k, 5%R410 0662057N23 100 k, 5%R411 0662057M98 10 k, 5%R413 0662057M01 0, 5%R414 0662057V34 180 k, 1%R415 0662057V26 91 k, 1%R416 0662057M98 10 k, 5%R418 0662057M01 0, 5%R419 0662057M67 510, 5%R420 0662057B46 10.0 M, 5%R421 0662057M81 2000, 5%R423 0662057N39 470 k, 5%R424 0662057N12 36 k, 5%R425 0662057N10 30 k, 5%R426 0662057N35 330 k, 5%R427 0662057M84 2700, 5%R428 0662057M10 2.2, 5%R429 0662057N20 75 k, 5%R431 0662057N39 470 k, 5%R432 0662057N16 51 k, 5%R434 0662057M62 330, 5%R435 0662057M81 2000, 5%R436 0662057M01 0, 5%R437 NOT PLACEDR447 0662057N23 100 k, 5%R448 0662057M98 10 k, 5%R450 0683962T45 68R451 0662057N03 15 k, 5%R452 0662057N23 100 k, 5%R453 NOT PLACEDR454 NOT PLACED
CircuitRef
MotorolaPart No. Description
.net
troller Parts List for VHF (for056G01/G02)
uitef
MotorolaPart No. Description
2113743L41 10000 pF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113928D08 10.0 uF2113743L09 470 pF, 10%2113928N01 0.1uF, 10%2113743L09 470 pF, 10%2113743M24 100000 pF, +80% / -20%2113928N01 0.1uF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2185895Z01 0.01 uF2113928N01 0.1uF, 10%NOT PLACED2113743L41 10000 pF, 10%2113928N01 0.1uF, 10%2113743M24 100000 pF, +80% / -20%2113743L09 470 pF, 10%2311049A59 10 uF, 10%, 6V2113743M24 100000 pF, +80% / -20%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113928N01 0.1uF, 10%2113743L09 470 pF, 10%2113743L41 10000 pF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113743N34 22.0 pF, 5%2113743N34 22.0 pF, 5%2113743G26 4.7 uF, +80% / -20%2113743L09 470 pF, 10%2113743E20 0.10 uF, 10%2113928N01 0.1uF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113928N01 0.1uF, 10%2113928N01 0.1uF, 10%2113743L09 470 pF, 10%NOT PLACED2113743M08 22000 pF, +80% / -20%2113743B29 1.00 uF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%
C473 2113743L09 470 pF, 10%C475 2113743H14 10.0 uF, +80% / -20%C476 2113928D08 10.0 uFC479 2113743M24 100000 pF, +80% / -20%C480 2113928D08 10.0 uFC481 2113928N01 0.1uF, 10%C490 2113743L09 470 pF, 10%C491 2113743L09 470 pF, 10%C492 2113743L09 470 pF, 10%C493 2113743L09 470 pF, 10%C494 2113743L09 470 pF, 10%C495 2113743L09 470 pF, 10%C496 2113743L09 470 pF, 10%C497 2113743L09 470 pF, 10%C609 NOT PLACEDC610 2113743L09 470 pF, 10%C611 2113743L09 470 pF, 10%C612 2113743L09 470 pF, 10%C613 2113743L09 470 pF, 10%C616 2113743L09 470 pF, 10%C701 2113743L09 470 pF, 10%C702 2113743L09 470 pF, 10%C703 2113743L09 470 pF, 10%C704 2113743L09 470 pF, 10%C705 2113743L09 470 pF, 10%C706 2113743L09 470 pF, 10%C707 2113743L09 470 pF, 10%C708 2113743L09 470 pF, 10%C709 2113743L09 470 pF, 10%C710 2113743L09 470 pF, 10%C711 2113743L09 470 pF, 10%C712 2113743L09 470 pF, 10%C713 2113743L09 470 pF, 10%C714 2113743L09 470 pF, 10%C715 2113743L09 470 pF, 10%C716 2113743L09 470 pF, 10%C717 2113743L09 470 pF, 10%C718 2113743L09 470 pF, 10%C721 2113743L09 470 pF, 10%C722 2113743L09 470 pF, 10%C723 2113743L09 470 pF, 10%C724 2113743L09 470 pF, 10%C726 2113743L09 470 pF, 10%C727 2113743L09 470 pF, 10%C728 2113743L09 470 pF, 10%C729 2113743L09 470 pF, 10%C730 2113743L09 470 pF, 10%C731 2113743L09 470 pF, 10%C751 2113743L09 470 pF, 10%CR411 4802245J62 Diode SchottkyCR412 4802245J62 Diode Schottky
CircuitRef
MotorolaPart No. Description
CR413 4802245J62 DiodeCR440 4813833C02 Dual D
odeD601 4880479U01 LEDD602 4880479U01 LEDD603 4880479U01 LEDD604 4880479U01 LEDD605 4880479U01 LEDD606 4880479U01 LEDE400 2480640Z01 BeadE401 2480640Z01 BeadE402 2480640Z01 BeadE403 2480640Z01 BeadE404 2480640Z01 BeadE405 2480640Z01 BeadE406 2480640Z01 BeadE407 2480640Z01 BeadE408 2480640Z01 BeadE409 2480640Z01 BeadE634 2480640Z01 BeadE637 2480640Z01 BeadE638 2480640Z01 BeadE639 2480640Z01 BeadE640 2480640Z01 BeadE641 2480640Z01 BeadE642 2480640Z01 BeadE643 2480640Z01 BeadE644 2480640Z01 BeadE645 2480640Z01 BeadE701 2480640Z01 BeadE702 2480640Z01 BeadE703 2480640Z01 BeadE704 2480640Z01 BeadFL401 4870368G02 ReflowJ400 0902042P03 40 PinJ403 0909059E04 20 PinJ702 0905505Y03 ConnL400 2462587Q42 390 nL401 2462587Q42 390 nL410 2462587Q42 390 nL411 2462587Q42 390 nM604 NOT PLACEDM605 NOT PLACEDM606 NOT PLACEDM607 NOT PLACEDM608 NOT PLACEDM609 NOT PLACEDM610 NOT PLACEDM611 NOT PLACEDM612 NOT PLACEDM613 NOT PLACED
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
4-28
R455R456R457R460R461R462R463R471R472R473R475R476R477R478R481R492R498R499R601R602R603R604R605R606R607R608R609R610R611R612R613R618R619R620R621R622R623R632R633R646R647R648R649R721R722RT400TP401TP402TP405TP406TP410
CircuiRef
.net
Note: E401 through E409 are NOT PLACED in84D04056G01.
* Motorola Depot Servicing only
NOT PLACED0662057M01 0, 5%0662057M98 10 k, 5%0662057M90 4700, 5%0662057M56 180, 5%0662057M98 10 k, 5%0662057M61 300, 5%0662057N06 20 k, 5%0662057N12 36 k, 5%0662057M26 10, 5%0662057M01 0, 5%0662057N08 24 k, 5%0662057M74 1000, 5%0662057M98 10 k, 5%0662057N08 24 k, 5%0662057M01 0, 5%0662057M98 10 k, 5%0662057M98 10 k, 5%0662057V20 51 k, 1%0662057V20 51 k, 1%0662057V05 13 k, 1%0662057V11 22 k, 1%0662057V18 43 k, 1%0662057V30 130 k, 1%0662057V05 13 k, 1%0662057V11 22 k, 1%0662057V18 43 k, 1%0662057V30 130 k, 1%0662057N16 51 k, 5%0662057N41 560 k, 5%0662057N47 1.0 M, 5%0662057M74 1000, 5%0662057M74 1000, 5%0662057M74 1000, 5%0662057M74 1000, 5%0662057M74 1000, 5%0662057M74 1000, 5%0662057N23 100 k, 5%0662057N23 100 k, 5%0662057N23 100 k, 5%0662057M85 3000, 5%0662057N23 100 k, 5%0662057N15 47 k, 5%NOT PLACEDNOT PLACED0680590Z01 Thermistor 33kNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED
t MotorolaPart No. Description
TP415 NOT PLACEDU400 5102463J40 3.3V RegulatorU404 5185130C53 ASFIC CMPU405 NOT PLACEDU406 *5102463J60 Flash ROM 512K x 8U407 *5102463J64 EEPROM 16K x 8U409 5102226J56 uP HC11FLOU410 5102463J57 3.3V RegulatorU420 5102463J44 Audio AmplifierU602 5102463J49 Comparator CMOSVR432 4805656W08 Quad Zener DiodeVR433 4805656W08 Quad Zener DiodeVR445 4880140L15 10V ZenerVR446 4880140L15 10V ZenerVR447 4880140L15 10V ZenerVR448 4880140L15 10V ZenerVR449 4880140L15 10V ZenerVR450 4880140L15 10V Zener
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
4-29
Conand
CircR
C400C401C402C403C405C406C408C409C410C411C414C415C416C419C420C421C422C423C424C425C426C427C428C429C430C431C433C434C435C436C437C440C441C442C443C444C445C447C448C449C450C451C452C453C456C471C472
Schottkyiode, Common Cath-
able Clock Osc X'tals Connectors ConnectorZIF HorizontalH, 10%H, 10%H, 10%H, 10%
Description
M614 NOT PLACEDM615 NOT PLACEDM616 NOT PLACEDM617 NOT PLACEDM618 NOT PLACEDM619 NOT PLACEDM620 NOT PLACEDM621 NOT PLACEDQ400 4809579E18 TSTR MOSFETQ403 4813824A17 XSTR PNP 40VQ405 4802245J54 Digital TransistorQ410 4802245J54 Digital TransistorQ416 4809579E18 TSTR MOSFETQ417 4809939C05 Transistor Dual NPN / PNPQ601 4813824A17 XSTR PNP 40VQ602 4813824A10 Transistor NPNQ603 4813824A10 Transistor NPNR400 0662057N15 47 k, 5%R406 0662057N20 75 k, 5%R408 NOT PLACEDR409 0662057M98 10 k, 5%R410 0662057N23 100 k, 5%R411 0662057M98 10 k, 5%R413 0662057M01 0 , 5%R414 0662057V34 180 k, 1%R415 0662057V26 91 k, 1%R416 0662057M98 10 k, 5%R418 0662057M01 0 , 5%R419 0662057M67 510 , 5%R420 0662057B46 10.0 M, 5%R421 0662057M81 2000 , 5%R423 0662057N39 470 k, 5%R424 0662057N12 36 k, 5%R425 0662057N10 30 k, 5%R426 0662057N35 330 k, 5%R427 0662057M84 2700 , 5%R428 0662057M10 2.2 , 5%R429 0662057N20 75 k, 5%R431 0662057N39 470 k, 5%R432 0662057N16 51 k, 5%R434 0662057M62 330 , 5%R435 0662057M81 2000 , 5%R436 0662057M01 0 , 5%R437 NOT PLACEDR447 0662057N23 100 k, 5%R448 0662057M98 10 k, 5%R450 0683962T45 68R451 0662057N03 15 k, 5%R452 0662057N23 100 k, 5%R453 NOT PLACEDR454 NOT PLACED
CircuitRef
MotorolaPart No. Description
.net
troller Parts List for UHF 1, UHF 2330MHz (for 8404056G01/G02)
uitef
MotorolaPart No. Description
2113743L41 10000 pF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113928D08 10.0 uF2113743N50 100 pF, 5%2113928N01 0.1 uF, 10%2113743N50 100 pF, 5%2113743M24 100000 pF, +80% / -20%2113928N01 0.1 uF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2185895Z01 0.01 uF2113928N01 0.1 uF, 10%NOT PLACED2113743L41 10000 pF, 10%2113928N01 0.1 uF, 10%2113743M24 100000 pF, +80% / -20%2113743N50 100 pF, 5%2311049A59 10 uF, 10%2113743M24 100000 pF, +80% / -20%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113928N01 0.1 uF, 10%2113743N50 100 pF, 5%2113743L41 10000 pF, 10%2113743M24 100000 pF, +80% / -20%2113743M24 100000 pF, +80% / -20%2113743N34 22.0 pF, 5%2113743N34 22.0 pF, 5%2113743G26 4.7 uF, +80% / -20%2113743N50 100 pF, 5%2113743E20 0.10 uF, 10%2113928N01 0.1 uF, 10%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113928N01 0.1 uF, 10%2113928N01 0.1 uF, 10%2113743N50 100 pF, 5%NOT PLACED2113743M08 22000 pF, +80% / -20%2113743B29 1.00 uF, 10%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%
C473 2113743N50 100 pF, 5%C475 2113743H14 10.0 uF, +80% / -20%C476 2113928D08 10.0 uFC479 2113743M24 100000 pF, +80% / -20%C480 2113928D08 10.0 uFC481 2113928N01 0.1 uF, 10%C490 2113743N50 100 pF, 5%C491 2113743N50 100 pF, 5%C492 2113743N50 100 pF, 5%C493 2113743N50 100 pF, 5%C494 2113743N50 100 pF, 5%C495 2113743N50 100 pF, 5%C496 2113743N50 100 pF, 5%C497 2113743N50 100 pF, 5%C609 NOT PLACEDC610 2113743N50 100 pF, 5%C611 2113743N50 100 pF, 5%C612 2113743N50 100 pF, 5%C613 2113743N50 100 pF, 5%C616 2113743N50 100 pF, 5%C701 2113743N50 100 pF, 5%C702 2113743N50 100 pF, 5%C703 2113743N50 100 pF, 5%C704 2113743N50 100 pF, 5%C705 2113743N50 100 pF, 5%C706 2113743N50 100 pF, 5%C707 2113743N50 100 pF, 5%C708 2113743N50 100 pF, 5%C709 2113743N50 100 pF, 5%C710 2113743N50 100 pF, 5%C711 2113743N50 100 pF, 5%C712 2113743N50 100 pF, 5%C713 2113743N50 100 pF, 5%C714 2113743N50 100 pF, 5%C715 2113743N50 100 pF, 5%C716 2113743N50 100 pF, 5%C717 2113743N50 100 pF, 5%C718 2113743N50 100 pF, 5%C721 2113743N50 100 pF, 5%C722 2113743N50 100 pF, 5%C723 2113743N50 100 pF, 5%C724 2113743N50 100 pF, 5%C726 2113743N50 100 pF, 5%C727 2113743N50 100 pF, 5%C728 2113743N50 100 pF, 5%C729 2113743N50 100 pF, 5%C730 2113743N50 100 pF, 5%C731 2113743N50 100 pF, 5%C750 2113743N50 100 pF, 5%CR411 4802245J62 Diode SchottkyCR412 4802245J62 Diode Schottky
CircuitRef
MotorolaPart No. Description
CR413 4802245J62 DiodeCR440 4813833C02 Dual D
odeD601 4880479U01 LEDD602 4880479U01 LEDD603 4880479U01 LEDD604 4880479U01 LEDD605 4880479U01 LEDD606 4880479U01 LEDE400 2480640Z01 BeadE401 2480640Z01 BeadE402 2480640Z01 BeadE403 2480640Z01 BeadE404 2480640Z01 BeadE405 2480640Z01 BeadE406 2480640Z01 BeadE407 2480640Z01 BeadE408 2480640Z01 BeadE409 2480640Z01 BeadE634 2480640Z01 BeadE637 2480640Z01 BeadE638 2480640Z01 BeadE639 2480640Z01 BeadE640 2480640Z01 BeadE641 2480640Z01 BeadE642 2480640Z01 BeadE643 2480640Z01 BeadE644 2480640Z01 BeadE645 2480640Z01 BeadE701 2480640Z01 BeadE702 2480640Z01 BeadE703 2480640Z01 BeadE704 2480640Z01 BeadFL401 4870368G02 ReflowJ400 0902042P03 40 PinJ403 0909059E04 20 PinJ702 0905505Y03 ConnL400 2462587Q42 390 nL401 2462587Q42 390 nL410 2462587Q42 390 nL411 2462587Q42 390 nM604 NOT PLACEDM605 NOT PLACEDM606 NOT PLACEDM607 NOT PLACEDM608 NOT PLACEDM609 NOT PLACEDM610 NOT PLACEDM611 NOT PLACEDM612 NOT PLACEDM613 NOT PLACED
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
4-30
R455R456R457R460R461R462R463R471R472R473R475R476R477R478R481R492R498R499R601R602R603R604R605R606R607R608R609R610R611R612R613R618R619R620R621R622R623R632R633R646R647R648R649R721R722RT400TP401TP402TP405TP406TP410
CircuiRef
.net
Note: E401 through E409 are NOT PLACED in8404056G01
* Motorola Depot Servicing only
NOT PLACED0662057M01 0 , 5%0662057M98 10 k, 5%0662057M90 4700 , 5%0662057M56 180 , 5%0662057M98 10 k, 5%0662057M61 300 , 5%0662057N06 20 k, 5%0662057N12 36 k, 5%0662057M26 10 , 5%0662057M01 0 , 5%0662057N08 24 k, 5%0662057M74 1000 , 5%0662057M98 10 k, 5%0662057N08 24 k, 5%0662057M01 0 , 5%0662057M98 10 k, 5%0662057M98 10 k, 5%0662057V20 51 k, 1%0662057V20 51 k, 1%0662057V05 13 k, 1%0662057V11 22 k, 1%0662057V18 43 k, 1%0662057V30 130 k, 1%0662057V05 13 k, 1%0662057V11 22 k, 1%0662057V18 43 k, 1%0662057V30 130 k, 1%0662057N16 51 k, 5%0662057N41 560 k, 5%0662057N47 1.0 M, 5%0662057M74 1000 , 5%0662057M74 1000 , 5%0662057M74 1000 , 5%0662057M74 1000 , 5%0662057M74 1000 , 5%0662057M74 1000 , 5%0662057N23 100 k, 5%0662057N23 100 k, 5%0662057N23 100 k, 5%0662057M85 3000 , 5%0662057N23 100 k, 5%0662057N15 47 k, 5%NOT PLACEDNOT PLACED0680590Z01 Thermistor 33kNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED
t MotorolaPart No. Description
TP415 NOT PLACEDU400 5102463J40 3.3V RegulatorU404 5185130C53 ASFIC CMPU405 NOT PLACEDU406 *5102463J60 Flash ROM 512K x 8U407 *5102463J64 EEPROM 16K x 8U409 5102226J56 Microprocessor ICU410 5102463J57 3.3V RegulatorU420 5102463J44 Audio AmplifierU602 5102463J49 Comparator CMOSVR432 4805656W08 Quad Zener DiodeVR433 4805656W08 Quad Zener DiodeVR445 4880140L15 10V ZenerVR446 4880140L15 10V ZenerVR447 4880140L15 10V ZenerVR448 4880140L15 10V ZenerVR449 4880140L15 10V ZenerVR450 4880140L15 10V Zener
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
5A-1
Section 5A
MODEL CHART AND TEST SPECIFICATIONS (136-174MHZ)
1.0 Model Chart
GP Series, VHF, 136-174 MHzModel Description
AZH38KDC9AA3 GP328 Plus 136-174 MHz 5W 16 CH
AZH38KDH9AA6 GP338 Plus 136-174 MHz 5W 128 CH
Item Description
X PMUD1673 GP328 Plus Super Tanapa 136-174 MHz 5W 16CH
X PMUD1674 GP338 Plus Super Tanapa 136-174 MHz 5W 128CH
X PMUD1677 GP328 Plus Tanapa 136-174 MHz 5W 16CH
X PMUD1678 GP338 Plus Tanapa 136-174 MHz 5W 128CH
X JMHD4005 GP328 Plus B/C Kit 136-174 MHz 5W 16CH
X PMHD4006 GP338 Plus B/C Kit 136-174 MHz 5W 128CH
X PMHD4000 GP328 Plus Front Housing Kit 16CH
X PMHD4001 GP338 Plus Front Housing Kit 128CH
X X PMAD4012 Antenna, 136-155 MHz Stubby
X X PMAD4013 Antenna,155-174 MHz Stubby
X X PMAD4014 Antenna, 136-155 MHz 14 cm
X X PMAD4015 Antenna, 155-174 MHz 14 cm
X X PMAD4023 Antenna, 150-161 MHz 14 cm
X X PMAD4025 Antenna 150-161 MHz Stubby
X 6804022G48 GP328 Plus User Guide
X 6804112J64 GP338 Plus User Guide
x = Indicates one of each is required.http:/
/www.m
yrad
io168
.net
5A-2 Specifications (for GP328 Plus)
2.0 Specifications (for GP328Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
VHF
Frequency: 136-174 MHz
Channel Capacity: GP328 Plus : 16 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x30.5mm
101.5mm x 55.5mm x35.5mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery
250 g
270 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT3801
VHF
RF OutputLi Ion @ 7.5V:
Low1W
High5W
Frequency 136-174 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
VHF12.5kHz
VHF 20/25kHz
Frequency: 136-174MHz
136-174MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
Specifications (for GP338 Plus) 5A-3
3.0 Specifications (for GP338Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
VHF
Frequency: 136-174 MHz
Channel Capacity: GP338 Plus : 128 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x33.0mm
101.5mm x 55.5mm x38.0mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
265 g
285 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT3801
VHF
RF OutputLi Ion @ 7.5V:
Low1W
High5W
Frequency 136-174 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
VHF12.5kHz
VHF 20/25kHz
Frequency: 136-174MHz
136-174MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
5A-4 Transmitter
4.0 Transmitter
4.1 General(Refer to Figure 5-1)
The VHF transmitter contains five basic circuits:
1. Power Amplifier
2. Antenna Switch
3. Harmonic Filter
4. Antenna Matching Network
5. Power Control Integrated Circuit (PCIC).
4.1.1 Power Amplifier
The power amplifier consists of two devices:
1. 9Z67 LDMOS driver IC (U3501) and
2. PRF1507 LDMOS PA (Q3501).
The 9Z67 LDMOS driver IC contains a 2 stage amplification with a supply voltage of 7.3V.
This RF power amplifier is capable of supplying an output power of 0.3W (pin 6 and 7) with an inputsignal of 2mW (3dBm) (pin16). The current drain would typically be 130mA while operating in thefrequency range of 136-174MHz.
The PRF1507 LDMOS PA is capable of supplying an output power of 7W with an input signal of 0.3W.The current drain would typically be 1800mA while operating in the frequency range of 136-174MHz.The power output can be varied by changing the biasing voltage.
Figure 5-1: Transmitter Block Diagram
PCIC
Antenna
P ADriver
Vcontrol Vcontrol
From VCO
Jack
PA-FinalStage
Antenna Switch/Harmonic Filter/
Matching Network
http:/
/www.m
yrad
io168
.net
Transmitter 5A-5
4.1.2 Antenna Switch
The antenna switch circuit consists of two PIN diodes (D3521 and D3551), a pi network (C3531,L3551 and C3550), and two current limiting resistors (R3571, R3572, R3573 ). In the transmit mode,B+ at PCIC (U3502) pin 23 will go low and turn on Q3561 where a B+ bias is applied to the antennaswitch circuit to bias the diodes "on". The shunt diode (D3551) shorts out the receiver port, and the pinetwork, which operates as a quarter wave transmission line, transforms the low impedance of theshunt diode to a high impedance at the input of the harmonic filter. In the receive mode, the diodesare both off, and hence, there exists a low attenuation path between the antenna and receiver ports.
4.1.3 Harmonic Filter
The harmonic filter consists of C3532 to C3536, L3531 and L3532. This network forms a low-passfilter to attenuate harmonic energy of the transmitter to specifications level. The harmonic filterinsertion loss should be less than 1.2dB.
4.1.4 Antenna Matching Network
A matching network which is made up of L3538 and C3537 is used to match the antenna'simpedance to the harmonic filter. This will optimize the performance of the transmitter and receiverinto an antenna.
4.1.5 Power Control Integrated Circuit (PCIC)
The transmitter uses the Power Control IC (PCIC), U3502 to control the power output of the radio bymaintaining the radio current drain. The current to the final stage of the power module is suppliedthrough R3519 (0.1ohms), which provides a voltage proportional to the current drain. This voltage isthen fedback to the Automatic Level Control (ALC) within the PCIC to keep the whole loop stable.
The PCIC has internal digital to analog converters (DACs) which provide the reference voltage of thecontrol loop. The voltage level is controlled by the microprocessor through the data line of the PCIC.
There are resistors and integrators within the PCIC, and external capacitors (C3562, C3563 andC3565) in controlling the transmitter rising and falling time. These are necessary in reducing thepower splatter into adjacent channels.
U3503 and its associated circuitry acts as a temperature cut back circuitry. This circuitry provides thenecessary voltage to the PCIC to cut the transmitter power when the radio temperature gets too high.
http:/
/www.m
yrad
io168
.net
5A-6 Receiver
5.0 Receiver
5.1 Receiver Front-End(Refer to VHF Receiver Front End Schematic Diagram on page 5A-22, VHF Receiver Back EndSchematic Diagram on page 5A-23, and VHF Transmitter Schematic Diagram on page 5A-26)
The RF signal is received by the antenna and applied to a low-pass filter. For VHF, the filter consistsof L3531, L3532, C3532 to C3563. The filtered RF signal is passed through the antenna switch. Theantenna switch circuit consists of two PIN diodes(D3521 and D3551) and a pi network (C3531, L3551and C3550).The signal is then applied to a varactor tuned bandpass filter. The VHF bandpass filtercomprises of L3301, L3303, C3301 to C3304 and D3301. The bandpass filter is tuned by applying acontrol voltage to the varactor diode (D3301) in the filter.
The bandpass filter is electronically tuned by the DACRx from IC404 which is controlled by themicroprocessor. Depending on the carrier frequency, the DACRx will supply the tuned voltage to thevaractor diodes in the filter. Wideband operation of the filter is achieved by shifting the bandpass filteracross the band.
The output of the bandpass filter is coupled to the RF amplifier transistor Q3302 via C3306. Afterbeing amplified by the RF amplifier, the RF signal is further filtered by a second varactor tunedbandpass filter, consisting of L3305, L3306, C3311 to C3314 and D3302.
Both the pre and post-RF amplifier varactor tuned filters have similar responses. The 3 dB bandwidthof the filter is about 12 MHz. This enables the filters to be electronically controlled by using a singlecontrol voltage which is DACRx .
Figure 5-2: VHF Receiver Block Diagram
Demodulator
Synthesizer
CrystalFilter
MixerVaractorTuned Filter
RF AmpVaractorTuned Filter
Pin DiodeAntennaSwitchRF Jack
Antenna
AGC
Control Voltagefrom ASFIC
First LOfrom FGU
Recovered AudioSquelch
RSSI
IF IC
SPI Bus
16.8 MHzReference Clock
SecondLO VCO
IF Amp
U3220
http:/
/www.m
yrad
io168
.net
Receiver 5A-7
The output of the post-RF amplifier filter is connected to the passive double balanced mixer whichconsists of T3301, T3302 and CR3301. Matching of the filter to the mixer is provided by C3317,C3318 and L3308. After mixing with the first LO signal from the voltage controlled oscillator (VCO)using high side injection, the RF signal is down-converted to the 45.1 MHz IF signal.
The IF signal coming out of the mixer is transfered to the crystal filter (Y3200) through a resistor pad(R3321 - R3323) and a diplexer (C3320 and L3309). Matching to the input of the crystal filter isprovided by C3200 and L3200. The crystal filter provides the necessary selectivity andintermodulation protection.
5.2 Receiver Back-End(Refer to VHF Receiver Back End Schematic Diagram on page 5A-23)
The output of crystal filter Y3200 is matched to the input of IF amplifier transistor Q3200 by capacitorC3203. Voltage supply to the IF amplifier is taken from the receive 5 volts (R5). The gain controlled IFamplifer provides a maximum gain of about 10dB. The amplified IF signal is then coupled intoU3220(pin 3) via L3202, C3207, and C3230 which provides the matching for the IF amplifier andU3220.
The IF signal applied to pin 3 of U3220 is amplified, down-converted, filtered, and demodulated, toproduce the recovered audio at pin 27 of U3220. This IF IC is electronically programmable, and theamount of filtering (which is dependent on the radio channel spacing) is controlled by themicroprocessor. Additional filtering, once externally provided by the conventional ceramic filters, isreplaced by internal filters in the IF module (U3220).
The IF IC uses a type of direct conversion process, whereby the externally generated second LOfrequency is divided by two in U3220 so that it is very close to the first IF frequency. The IF IC (U3220)synthesizes the second LO and phase-locks the VCO to track the first IF frequency. The second LOis designed to oscillate at twice the first IF frequency because of the divide-by-two function in the IFIC.
In the absence of an IF signal, the VCO will “search” for a frequency, or its frequency will vary close totwice the IF frequency. When an IF signal is received, the VCO will lock onto the IF signal. Thesecond LO/VCO is a Colpitts oscillator built around transistor Q3270. The VCO has a varactor diode,D3270, to adjust the VCO frequency. The control signal for the varactor is derived from a loop filterconsisting of C3278 to C3280, R3274 and R3275.
The IF IC (U3220) also performs several other functions. It provides a received signal-strengthindicator (RSSI) and a squelch output. The RSSI is a dc voltage monitored by the microprocessor,and used as a peak indicator during the bench tuning of the receiver front-end varactor filter. TheRSSI voltage is also used to control the automatic gain control (AGC) circuit at the front-end.
The demodulated signal on pin 27 of U3220 is also used for squelch control. The signal is routed toU404 (ASFIC) where squelch signal shaping and detection takes place. The demodulated audiosignal is also routed to U404 for processing before going to the audio amplifier for amplification.
http:/
/www.m
yrad
io168
.net
5A-8 Receiver
5.3 Automatic Gain Control Circuit(Refer to VHF Receiver Front End Schematic Diagram on page 5A-22 and VHF Receiver Back EndSchematic Diagram on page 5A-23)
The front end automatic gain control circuit provides automatic reduction of gain, of the front end RFamplifier via feedback. This action is necessary to prevent overloading of back end circuits. This isachieved by drawing some of the output power from the RF amplifier output. At high radiofrequencies, capacitor C3327 provides the low impedance path to ground for this purpose. CR3302 isa PIN diode used for switching the path on or off. A certain amount of forward biasing current isneeded to turn the PIN diode on. Transistor Q3301 provides this current.
Radio signal strength indicator, RSSI, a voltage signal, is used to drive Q3301 to saturation i.e.turned on. RSSI is produced by U3220 and is proportional to the gain of the RF amplifier and the inputpower to the radio.
Resistors R3304 and R3305 are voltage dividers designed to turn on Q3301 at certain RSSI levels. Inorder to turn on Q3301 the voltage across R3305 must be greater or equal to the voltage acrossR3324, plus the base-emitter voltage (Vbe) present at Q3301. Capacitor C3209 is used to dampenany instability while the AGC is turning on. The current flowing into the collector of Q3301, a highcurrent gain NPN transistor, will be drawn through the PIN diode to turn it on. Maximum currentflowing through the PIN is limited by the resistors R3316, R3313, R3306 and R3324. C3326 is afeedback capacitor used to provide some stability to this high gain stage.
An additional gain control circuit is formed by Q3201 and its associated circuitry. Resistors R3206 andR3207 are voltage dividers designed to turn on Q3201 at a significantly higher RSSI level than thelevel required to turn on PIN diode control transistor Q3301. In order to turn on Q3201 the voltageacross R3207 must be greater or equal to the voltage across R3208, plus the base-emitter voltage(Vbe) present at Q3201. As current starts flowing into the collector of Q3201, it reduces the biasvoltage at the base of IF amplifier transistor Q3200 and in turn, the gain of the IF amplifier. The gaincan be controlled in a range of -30dB up to +10dB.
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5A-9
6.0 Frequency Generation Circuitry
The Frequency Generation Circuitry is composed of two main ICs, the Fractional-N synthesizer(U3701), and the VCO/Buffer IC (U3801). Designed in conjunction to maximize compatibility, the twoICs provide many of the functions that normally would require additional circuitry. The synthesizerblock diagram illustrates the interconnect and support circuitry used in the region. Refer to therelevant schematics for the reference designators.
The synthesizer is powered by regulated 5V and 3.3V which come from U3711 and U3201respectively. The synthesizer in turn generates a superfiltered 4.5V which powers U3801.
In addition to the VCO, the synthesizer must interface with the logic and ASFIC circuitry.Programming for the synthesizer is accomplished through the data , clock and chip select lines fromthe microprocessor. A 3.3V dc signal from synthesizer lock detect line indicates to the microprocessorthat the synthesizer is locked.
Transmit modulation from the ASFIC is supplied to pin10 of U3701. Internally the audio is digitized bythe Fractional-N and applied to the loop divider to provide the low-port modulation. The audio runsthrough an internal attenuator for modulation balancing purposes before going out to the VCO.
Figure 5-3: Frequency Generation Unit Block Diagram
VoltageMultiplier
SynthesizerU3701 Loop
Filter
VCOBICU3801
ToMixer
ToPA Driver
VCP
Vmult1Aux3
MOD OutModulatingSignal
Vmult2
Rx VCO Circuit
Tx VCO
TRB
16.8 MHzRef. Osc.
Rx Out
Tx Out
Circuit
http:/
/www.m
yrad
io168
.net
5A-10 Frequency Generation Circuitry
6.1 Synthesizer(Refer toVHF Synthesizer Schematic Diagram on page 5A-24)
The Fractional-N Synthesizer uses a 16.8MHz crystal (Y3761) to provide a reference for the system.The LVFractN IC (U3701) further divides this to 2.1MHz, 2.225MHz, and 2.4MHz as referencefrequencies. Together with C3761, C3762, C3763, R3761 and D3761 , they build up the referenceoscillator which is capable of 2.5ppm stability over temperatures of -30 to 85°C. It also provides16.8MHz at pin 19 of U3701 to be used by ASFIC and LVZIF.
The loop filter which consist of C3721, C3722, R3721, R3722 and R3723 provides the necessary dcsteering voltage for the VCO and determines the amount of noise and spur passing through .
In achieving fast locking for the synthesizer, an internal adapt charge pump provides higher current atpin 45 of U3701 to put synthesizer within the lock range. The required frequency is then locked bynormal mode charge pump at pin 43 .
Both the normal and adapt charge pumps get their supply from the capacitive voltage multiplier whichis made up of C3701 to C3704 and triple diodes D3701, D3702. Two 3.3V square waves ( 180 degout of phase) are first multiplied by four and then shifted, along with regulated 5V, to build up 13.5V atpin 47 of U3701.
Figure 5-4: Synthesizer Block Diagram
DATA
CLK
CEX
MODIN
VCC, DC5V
XTAL1
XTAL2
WARP
PREIN
VCP
REFERENCEOSCILLATOR
VOLTAGEMULTIPLIER
VOLTAGECONTROLLEDOSCILLATOR
2-POLELOOPFILTER
DATA (U409 PIN 100)
CLOCK (U409 PIN 1)
CSX (U409 PIN 2)
MOD IN (U404 PIN 40)
+5V (U3711 PIN 4)
7
8
9
10
13, 30
23
24
25
32
47
VMULT2 VMULT1
BIAS1
SFOUT
AUX3
AUX4
IADAPTIOUT
GND
FREFOUT
LOCK 4
19
6, 22, 23, 24
4345
3
2
28
14 15
40
FILTERED 5V
STEERINGLINE
LOCK (U409 PIN 56)
PRESCALER IN
LO RF INJECTION
TX RF INJECTION(1ST STAGE OF PA)
FREF (U3220 PIN 21 & U404 PIN 34)
39BIAS2
41
DUALTSTRS
48
5VR5
5, 20, 34, 36(U3201 PIN 5)
AUX1
VDD, 3.3V MODOUT
U3701LOW VOLTAGEFRACTIONAL-NSYNTHESIZER
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5A-11
6.2 VCO - Voltage Controlled Oscillator(Refer toVHF Voltage Controlled Oscillator Schematic Diagram on page 5A-25)
The VCOBIC (U3801) in conjunction with the Fractional-N synthesizer (U3701) generates RF in boththe receive and the transmit modes of operation. The TRB line (U3801 pin 19) determines whichoscillator and buffer will be enabled. A sample of the RF signal from the enabled oscillator is routedfrom U3801 pin 12, through a low pass filter, to the prescaler input (U3701 pin 32). After frequencycomparison in the synthesizer, a resultant CONTROL VOLTAGE is received at the VCO. This voltageis a DC voltage typically between 3.5V and 9.5V when the PLL is locked on frequency.
Figure 5-5: VCO Block Diagram
Presc
RX
TX
MatchingNetwork
Low PassFilter
Attenuator
Pin8
Pin14
Pin10
(3701 Pin28)
VCC Buffers
TX RF Injection
U3701 Pin 32
AUX3 (U3701 Pin2)
Prescaler Out
Pin 12Pin 19Pin 20
TX/RX/BSSwitching Network
U3801VCOBIC
RxActive Bias
TxActive Bias
Pin2
Rx-I adjust
Pin1
Tx-I adjust
Pins 9,11,17Pin18
VsensCircuit
Pin15
Pin16
RX VCOCircuit
TX VCOCircuit
RX Tank
TX Tank
Pin7
Vcc-Superfilter
Collector/RF in
Pin4
Pin5
Pin6
RX
TX
(U3701 Pin28)
Rx-SW
Tx-SW
Vcc-Logic
(U3701 Pin28)
Steer LineVoltage(VCTRL)
Pin13
Pin3
TRB_IN
LO RF INJECTION
VSF
VSF
VSF
http:/
/www.m
yrad
io168
.net
5A-12 Frequency Generation Circuitry
The RF section of the VCOBIC(U3801) is operated at 4.54 V (VSF), while the control section of theVCOBIC and Fractional-N synthesizer (U3701) is operated at 3.3V. The operation logic is shown inTable 5-1.
In the receive mode, U3801 pin 19 is low or grounded. This activates the receive VCO by enabling thereceive oscillator and the receive buffer of U3801. The RF signal at U3801 pin 8 is run through amatching network. The resulting RF signal is the LO RF INJECTION and it is applied to the mixer atT3302.
During the transmit condition, when PTT is depressed, 3.2 volts is applied to U3801 pin 19. Thisactivates the transmit VCO by enabling the transmit oscillator and the transmit buffer of U3801. TheRF signal at U3801 pin 10 is injected into the input of the PA module (U3501 pin16). This RF signal isthe TX RF INJECTION. Also in transmit mode, the audio signal to be frequency modulated onto thecarrier is received through U3701 pin 41.
When a high impedance is applied to U3801 pin19, the VCO is operating in BATTERY SAVER mode.In this case, both the receive and transmit oscillators as well as the receive transmit and prescalerbuffer are turned off.
Table 5-1: VCO Control Logic
DesiredMode AUX 4 AUX 3 TRB
Tx n.u. High (@3.2V) High (@3.2V)
Rx n.u. Low Low
Battery Saver n.u. Hi-Z/Float(@1.6V)
Hi-Z/Float (@1.6V)
http:/
/www.m
yrad
io168
.net
Notes For All Schematics and Circuit Boards 5A-13
7.0 Notes For All Schematics and Circuit Boards* Component is frequency sensitive. Refer to the Electrical Parts List for value and usage.
1. Unless otherwise stated, resistances are in Ohms (k = 1000), and capacitances are in picofarads(pF) or microfarads (µF).
2. DC voltages are measured from point indicated to chassis ground using a Motorola DC multime-ter or equivalent. Transmitter measurements should be made with a 1.2 µH choke in series withthe voltage probe to prevent circuit loading.
3. Reference Designators are assigned in the following manner:
400/500 Series = Controller
600 Series = Keypad Board
3200 Series = IF Circuitry
3300 Series = Receiver
3500 Series = Transmitter
3700 and3800 Series = Frequency Generation
4. Interconnect Tie Point Legend:
UNSWB+ = Unswitch Battery Voltage (7.5V)
SWB+ = Switch Battery Voltage (7.5V)
R5 = Receiver Five Volts
CLK = Clock
Vdda = Regulated 3.3 Volts (for analog)
Vddd = Regulated 3.3 Volts (for digital)
CSX = Chip Select Line (not for LVZIF)
SYN = Synthesizer
DACRX = Digital to Analog Voltage (For Receiver Front End Filter)
VSF = Voltage Super Filtered (5 volts)
VR = Voltage Regulator
6-LAYER CIRCUIT BOARD DETAIL VIEWINGCOPPER STEPS IN PROPER LAYER SEQUENCE
LAYER 1 (L1)
LAYER 2 (L2)LAYER 3 (L3)LAYER 4 (L4)
LAYER 5 (L5)LAYER 6 (L6)
INNER LAYERS
SIDE 1
SIDE 2
http:/
/www.m
yrad
io168
.net
5A-14 Notes For All Schematics and Circuit Boards
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
Circu 5A-15
8.0
ZMY0130792-O
3212 C3213
C3225
C3270
C3271
C3272
C3273
C3274
C3275
C3276
C3277
C3278
C3279
C3280
D3270L3270
L3271
PB504
Q3270
R3226
R3270
R3271
R3272
R3273
R3274
R3275
R3276
SH3201
VR444
C502
C505
C512 C513Q502
Q505
R505
R506
VR501
C511
C514
C520
C3539
43
2
CR503
L3538
PB505
R501
R502
C3306
C3307
C3308
C3309
C331011
C3327
C3338
CR3303
L3304
305
Q3302
R3308
R3309
R3310
R3311
R3312
R3313
R3316
SH3303
C3527
C3524
C3525
C3528
C3531
C3532
C3533
C3534
C3535
C3536
C3550
C3551
C3552
D3521
D3551
L3531
L3532
L3551
L3552
R3551
SH3501
C3537
F (136-174MHz) Main Board Top Side PCB No. 8404055G05/G06/G07
.net
it Board/Schematic Diagrams and Parts List
Circuit Board/Schematic Diagrams and Parts List
1
40
J200
B503
TP3702
6 4
31
Y3761 B504
C522
TP3701
C3205
R3200
C521
PB501PB502
C3200C3201
C3202
C3203
C3204
C3206
C3207
C3208
C3210
L3200
L3201 L3202
Q3200
Q3201
R3201
R3202
R3203
R3204
R3205
R3206
R3207
R3208
R3209
R3210
R3211
R3212
SH3203
Y3200
C3209
C
C3214
C3215
Q3202
R3213
R3214
R3218
R3225
U3201
C33C3312C3313C3314
C3330C3331
C3332
D3302
L3L3306
C3318
C3319
C3320
C3329
C3334
C3335
L3309
L3312
R3317
R3318
R3321
R3322
R3323
SH3302
6
43
T3301
6
4 3
T3302
TP3301
C3706
C3710
C3711C3712
C3713
C3714
C3715
C3721
C3722
C3724
C3741
C3742
C3743
C3744
C3745
C3746
C3752
C3753
C3754
43
Q3721
R3701
R3721
R3722
R3723
R3741
R3751
R3752
SH3701
U3711
C3842
C3822
C3824C3825
C3826
C3828
C3829
C3830
C3832 C3833
C3834
C3835
C3836
D3821D3831
D3832
L3821
L3822
L3823
L3824
L3825
L3831
L3832 L3833
L3834
R3821
R3822
R3823
R3828
R3833 R3834
R3835
R3836
SH3801
C3501
C3502C3503
C3504
C3505C3518
C3519
C3541
C3542
C3543
C3544
C3546
C3547
L3501
L3503
L3518
12 3
Q3501
R3501
R3502 R3503
R3505
R3512
R3513
R3541
R3542R3543
R3544
R3545
R3546
R3547
R3548
1
16
8
9
U3501
C3512
C3513
C3514
C3517L3504
L3511 L3512
L3513
L3515
R3506
R3507
SH3502
C3521 C3523
L3521
L3522
VH
http:/
/www.m
yrad
io168
5A-16 Circuit Board/Schematic Diagrams and Parts List
C525C526
C527C528
C529C530
C531C532
C533C534
C535C536
C537C538
C539C540
C541C542
C543
C544
C545
C546C547
C548
C549
C550
C551C552
C553
C555
R509
C3751
C3763
D3761
R3760
R3761
C3735
CR501
L505
R3763
VR439
VR441
VR506
2
34
Y3762
36
C3701
C3702
C3703
C3704
C3705
C3707
C3708
C3709
C3725
C3726
C3727
C3731
C3732
C3733
C3734
C3755
C3761
C3762 D3701
D3702
L3701
L3731
R3702
R3703
R3704
R3705
R3726
R3727
R3762
SH3702
137
25 13
U3701
3508
C3570
Q3561
R3569R3570
C3801
C3802
C3803
C3804
C3805
C3806
C3808
C3809
C3810
C3811
C3812
C3813
C3815
C3816
C3818
C3821
C3823 C3827
L3801
L3809 L3811
L3812 L3813
L3816
L3826
Q3801
R3801
R3802
R3803
R3804
R3805
R3806
R3807
R3808
R3811
R3812
R3816
R3817
R3818
R3824
R3825
R3826
R3829
R3830
R3831
R3832
SH3802
11
1
20
10
U3801
VHF (1
.net
ZMY0130793-O
4
53
2S502
2
C
8
C
4
S501C3304
C3305
C3315
C3316
C3317
C3321
C3323
C3324
C3325
C3326
C3337C3339
CR3301
CR3302
L3303
L3308
Q3301
R3301
R3303
R3304
R3305
R3306
R3307
R3314
R3315
R3319
R3320
R3324
RT3301
C3301
C3302 C3303
C3322
D3301
L3301
SH3301
C3224
C3235
C3236
C3237
C3240
C3241
C3242
R3223
R3224
C3231
C3232
C3233
C3234
C3211
C3218
C3219
C3220
C3221
C3222
C3223
C3227
C3228
C3230
C3238
C3243
C3244
L3221
R3219
R3220
R3221
R3222
C3226 C3229
C3239
SH3202
137
25 13
U3220
1
2
3
4
J3501J3502
3
2
1
B501
VR440
C503
C523
C33
F501
C3526 C3569
L3523
R3566
R3571R3572R3573
TP3502
CC3509
C3515
C3516
C3560
C3561
C3562
C3563
C3564
C3565
C3566
C3567
C3568 C3571
H3501
R3519
R3561
R3562
R3563
R3564
R3565
1
179
25
U3502
U3503
VR3501
L3519
36-174MHz) Main Board Bottom Side PCB No. 8404055G05/G06/G07
http:/
/www.m
yrad
io168
Circu 5A-17
ZMY0130792-A
C3280
C3273
270
C3278
C3271
C3272
C3274
C3275
C3276
C3277
C3279
D3270
L3270
L3271
Q3270R3272
R3273
R3226
R3270
R3275
R3271
R3274
R3276
SH3201
C3213
PB504VR444
C502
C505
C512 C513 Q502
Q505
R505
R506
VR501
C511
C514
C520
CR5032
3 4
R501
R502C3307
C3338
C3310
C3306
C3309
C3308
27
CR3303
L3304Q3302
R3310
R3311
R3313
R3308
R3309
R3312R3316
C3552
C3532
C3524
C3531
C3525
C3528
C3533
C3534
C3535
C3536
C3550
C3551
D3521
D3551 L3552
L3531
L3532
L3551
R3551
SH3501
C3537
C3539L3538
PB505
SH3303
VHF (136-174MHz) Main Board Top Side PCB No. 8404055G09
.net
it Board/Schematic Diagrams and Parts List
C3752
C3715
C3741 C3712
C3754
C3753 C3724
C3742
C3743
C3744
C3745
C3746
C3721
C3722
C3706
C3714
C3710
C3711
C3713
Q3721
34
R3722
R3701
R3723
R3741
R3751
R3721R3752
SH3701
U3711
40
J200
1
TP3702
Y3761
1 3
46
B503
B504
C522
C3205
R3200
TP3701
TP3301
C3203
C3204
C3206
C3210
C3201
C3202
C3208
C3200
C3207L3200
L3202L3201
Q3201
Q3200R3203
R3201
R3210
R3211
R3202
R3212
R3204
R3205
R3209
R3206
R3207
R3208
SH3203
Y3200
C521
PB501PB502
C3214C3209 C3215
Q3202R3218 R3213
R3225
R3214
U3201
C3225
C
C3212
C3330C3331
C3314
C3319 C3312
C33
C3329
C3311C3313
C3332
C3318 D3302
L3305L3306
R3321R3317R3322
R3323
T3301
3 4
6
C3320
C3334
C3335 L3309
L3312
R3318
SH3302
T3302
34
6
C3832
C3842
C3826
C3833
C3834 C3825C3836 C3830C3835
C3828
C3829
D3832
D3821D3831
L3824L3834
L3832L3825
L3831
L3833 L3822L3823
R3836
R3835
R3822R3834 R3823
R3833
C3822
C3824
L3821
R3828
R3821
SH3801
SH3502
C3542
C3544C3541
C3543
C3512
C3513
C3514
C3517L3504
L3511 L3512
L3513
R3541
R3543
R3506
R3507
8 1
C3501C3505
C3504
R3505
R3502
R3501
R3503
U3501
9 16
C3546
C3502C3503
C3547
C3518L3503
R3547
R3542
R3512
R3544
R3545
R3546
R3548
L3501
C3519
C3527
L3518
L3522
R3513
C3521L3515
32
Q3501
1
C3523
L3521
http:/
/www.m
yrad
io168
3
5A-18 Circuit Board/Schematic Diagrams and Parts List
ZMY0130793-A
C3735
CR501
L505
R3763
VR439
VR441
VR506
43
2
Y3762
C3751
C3763
D3761
R3761
R3760
C525C526
C527C528
C529C530
C531C532
C533C534
C535C536
C537C538
C544C545C546
C547
C549
C550
C555
C539C540
C541C542
C543
C548
R509
C551C552
C553
C3727
C3701
C3702
C3703
C3704
C3731
C3732
C3734
C3725
C3708
C3709
C3761
C3707
C3705
C3733
C3755
C3726
C3762
D3701
D3702
L3701
L3731
R3702
R3726
R3762
R3703
R3704
R3727
R3705
SH3702
1325
37 1
U3701
C3806
C3813
C3821
C3823
C3803
C3815
C3802
C3810
C3811
C3812
C3818
C3827
C3801
C3805
C3808C3804
C3809
C3816
L3826
L3801
L3811
L3812
L3816
L3809
L3813
Q3801
R3804
R3831
R3801
R3807 R3812
R3818
R3830
R3808
R3816
R3802
R3811
R3806
R3825
R3803
R3826
R3832
R3824
R3805
R3817
R3829
SH3802
U3801
10
201
11
3336
C3571
C3570
C3508
Q3561
R3570
R3569
VHF (1
.net
2S502
3 5
4
C3236C3237 C3224
C3231
C3232
C3233
C3234
C3235
C3240
C3241
C3242
R3223
R3224
C3229
C3221
C3227
C3228
C3244
C3219
C3222
C3223
C3226
C3211
C3218
C3220C3230
C3238
C3239
C3243
L3221
R3222
R3220
R3219
R3221
SH3202
1325
37 1
U3220
SH3301
1
2
3
B501
VR440
4
C
8
C
S501
2C3325
C3326
C3315
C3339C3316
CR3302
Q3301
R3301
R3306
R3314
R3304
R3305
R3307
R3315
R3324
RT3301
C3322 C3323
C3305 C3321
C3324
C3302 C3304C3303
D3301
L3301 L3303
R3303
C3301 C3317
C3337
CR3301
L3308
R3319
R3320
C503
C523
C
F501
J3501
4
3
2 1
J3502
C3526 C3569
C3515
C3516
C3564
H3501
L3523
R3566
R3519
R3571R3572R3573
TP3502
VR3501
C3566
C3560
C3565
C3509
C3567C3561
C3562
C3563
C3568
L3519
R3565
R3562
R3561
R3563
R356425
9 17
U3502
1
U3503
36-174MHz) Main Board Bottom Side PCB No. 8404055G09
http:/
/www.m
yrad
io168
Circu 5A-19
ZMY0130788-O
16.8MHz
5V
DEMOD
RSSI
LVZIF_SEL
RESET
CLK
CSX
DACRx
DATA
DACRx_1_SW
5V_1_SW
16_8MHz_1_SW
CLK_4_SW
16_8MHz_2_SW
DATA_5_SWDATA_4_SW
5V_5_SW
CSX_2_SW
5V_2_SW
CLK_1_SW
DATA_2_SW
CSX_1_SW
5V_6_SW5V_4_SW
CLK_5_SWCLK_3_SW
DACRX_2_SW
DATA_1_SW
CLK_2_SW
5V_3_SW
DATA_3_SW
DEMOD_2_SW
RESET_1_SW
LVZIF_SEL_1_SW
DEMOD_1_SW
RESET_2_SW
LVZIF_SEL_2_SW
RSSI_2_SWRSSI_1_SW
Vdda_3_SWVdda_2_SW
SWB+_1_SW
GREEN_LED_1_SW
SWB+_3_SW
RED_LED_1_SW
BATT_CODE_1_SW
SWB+_2_SW
LI_ION_1_SW
Vdda_1_SW
LI_ION
RED_LED
SWB+
Vdda
BATT_CODE
GREEN_LED
MECH_SWB+
PTT
RTA0
RTA1
RTA2
RTA3
SB1
SB2
SB3
UNSWB+
VOL
EMER
MECHSWB+_1_SW
RTA3_1_SW
VOL_1_SW
SB1_1_SW
SB2_1_SW
RTA2_1_SW
EMER_1_SW
PTT_1_SW
RTA1_1_SW
RTA0_1_SW
UNSW+_1_SW
SB3_1_SW
UNSWB+_2_SW
PTT
VOL
MECH_SWB+
UNSWB+
RTA2
SB2
RTA3
SB1
EMER
SB3
RTA1
RTA0
DUMMY
VHF Controls And Switches Schematic Diagram (sheet 1 of 2)
.net
it Board/Schematic Diagrams and Parts List
J200-40J200-39
J200-10J200-11
J200-8J200-9
J200-6J200-7
J200-4J200-5
J200-3
J200-1J200-2
J200-37
J200-35
J200-38
J200-34J200-33
J200-36
J200-32
J200-31J200-30
J200-28J200-29
J200-26J200-27
J200-24J200-25
J200-22J200-23
J200-21
J200-19J200-20
J200-17J200-18
J200-15J200-16
J200-13J200-14
J200-12
EMERVOL
GREEN_LED
MODIN
16.8MHz
UNSWB+
LOCKRESETDACRX
CSXBATT_CODE
LI_ION
DEMOD
SWB+
5VVdda
RTA2RTA3RSSICLKDATALVZIF_SEL
MECH_SWB+RTA0RTA1
RED_LED
SB2SB1PTT
SB3
470pFC555
NUR509
470pFC525
470pFC527470pF
C526470pFC528
470pF470pFC537 C538
470pFC535
470pFC534
470pFC533C529
470pFC530
470pF 470pF 470pFC531
470pFC532 C536
470pF470pFC550 C551C549
470pFC548NU
C547470pF470pF
C546470pFC545C544
470pFC543NU
C541 C542NU
C540NUNU
C539NU 470pF470pF
C552 C553SWB+
LI_ION
BATT_CODE
Vdda
RED_LED
GREEN_LED
http:/
/www.m
yrad
io168
5A-20 Circuit Board/Schematic Diagrams and Parts List
B501
ATA
EG
S
PB505
SWITCH1 A1
3 A2
2B1
4B2
SWITCH
NU
6.8V
VR440
6.8V
VR441
NU
NU
VR444
6.8V
SWITCH
PB502
1 A1
3 A2
2B1
4B2
SWITCH
4B2
SWITCH1 A1
3 A2
2B1
SWITCHPB504
.01uF
C522
.01uF
1 A1
3 A2
2B1
4B2
SWITCHPB501
SWITCH
.01uF
C520
.01uF
.01uF
EMER
.01uF
C521
SB1
PTT
SB2
VHF C
.net
DN
PO
Q502
100pF
C505
6.8V
VR506
100pF
6.8V
10KR50510K
C0C1
C1
7G
ND
9G
ND
1
1PC0
2PC1
4PC2
8PC3
S501SWITCH
C0
1
LOW
5
3H
IGH
TAB16
TAB27
2
S502
SWITCH
mgc_comps
4
CR503
2 4
1 3
1000pFC5231000pF
100pF
100pF
C503
Q505
0.47uF
C502
100pF
0.47uF
100pF
C511
VR501
C513
6.8V6.8V
100pF
100pF
R50647K
2
4
3
47K
L505
390nH390nH
5
1
6
IMX1IMX1
10V
VR439
12V
CR501
R502
180180
B503
21
24VF501
24V
B504
C514
100pF
C512
100pF
100pF
100pF
R501
680680
Vdda
UNSWB+
MECH_SWB+
RTA3
RTA2
RTA0RTA1
VOL LI_ION
BATT_CODE
GREEN_LED
SWB+
RED_LED
Vdda
ontrols And Switches Schematic Diagram (sheet 2 of 2)
http:/
/www.m
yrad
io168
Circu 5A-21
8
VR4408V
.01uFC520
C521
.01uF
VR441
8V
8V
VR444
SWITCH
A11
A23
B1 2
B2 4
PB502
DATA
NEG
POS
B501
SWITCH
A11
A23
B1 2
B2 4
PB505
3
B1 2
B2 4
PB504SWITCH
A11
A2
C52201uF
A11
A23
B1 2
B2 4
PB501SWITCH
EMER
SB1
PTT
SB2
VHF Controls And Switches Schematic Diagram(sheet 2 of 2 for 8404055G09 PCB)
.net
it Board/Schematic Diagrams and Parts List
PC12
PC24
PC3
Q502
SWITCHS501
C0C0
C1C1
GND
7
GND1
9
PC01
R501680
HIGH
36
TAB1
7TAB2
2
mgc_comps
S502
4
LOW
15
Q505
C5020.47uF
C511
VR5016.8V
100pFC513
47KR506
47K
C505100pF
6.8VVR506
R50510K
24V
F501
21
C523
1000pFC503100pF
2
4
3
390nH
IMX1
5
1
6
L505
10V 12V
VR439CR501
R502180
B503
2 4
1 3
B504
CR503
100pF100pFC514
MECH_SWB+
UNSWB+
100pFC512
Vdda
RTA3
RTA2
RTA0
RTA1
VOL
Vdda
LI_ION
BATT_CODE
GREEN_LED
SWB+
RED_LED
http:/
/www.m
yrad
io168
5A-22 Circuit Board/Schematic Diagrams and Parts List
ZMY0130786-O
UN
R
Stripline
10pFC3315
C33163.3pF
39pFC3317
C333910pF
.022uFC3318
L330810nH
150nHL3309
150R3321
220R3322
C332082pF
R332318 IF_1_FE
IF
C3319NU
6
3
1
2
RF BALUN
T3301
4
R3320NU
2
34
1
CR3301
NUR3319
33nHL3312
22pFC3335
20pFC3334
T3302
4
6
3
1
2
IF BALUN
SHIELD
1
SHIELD
1
SH3302SH3301
470R3318
1
TP3301
VHF R
.net
SWB+
C333610uF
UNSWB_PLUS_1_RX UNSWB_PLUS_2_RX
.022uFC3337
0.1uFC3309
R5_2_FE R5_3_FE
470R3316
RX_INRX_IN_1_FE
12nHL3301
150pFC3302
C33015.6pF NU
C330512nHL3303
C330315pF
C3304150pF
CR3303
330pFC3308
470nHL3304
100pFC3307
Q3302
R331110
C33060.1uF
R33095.6K
33R3312
R331010K
R33081.5K
22R3313
R3315330
150pFC3311 C3312
16pF
10R3314
D3302
12nHL3305C3310
NU
Stripline
RSSIRSSI_1_FE
C332433pF
DACRx_1_FE
R3303100K
C3321330pF
C3322100pF
DACRx
100pFC3323
RX_INJ_1_FEX_INJ
DUMMY
D3301
100KR3304
NUC3326
33KR3307
470pFC3338
Q33011000pFC3325
220R3324NU
R3301
68KR3305
C3327330pF
2.2KR3306
SMBV1032CR3302
NURT3301 C3330
100pF330pFC3329 C3331
100pF
R3317 100K
NUC3314
150pFC3313
L330612nH
Stripline
C333239pF
eceiver Front End Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5A-23
ZMY0130787-O
Vdd_FILTEREDILTERED
R32204.7K
10pFC3220
100pFC3229.01uF
C3228
L32211uH
0.1uFC3226
C32250.1uF
.022uFC3239
C32380.33uF
9 VPP
2 RED_VSS
30ROSE_VCC
29ROSE_VSS
5 RSSI_FLT
4 RSSI_OUT
16T
ES
TA
8 TESTD
32VAG
25VAG_REF
MIX
_IN
46
24M
LPD
_CR
26PHASE_LOCK
47P
RE
AM
P_O
UT
48P
RE
_AG
C
3 PRE_IN
1 RED_VCC
2120G
ND
10 GOLD_VCC
14G
OLD
_VS
S
41G
RE
EN
_VC
C
43G
RE
EN
_VS
S
IOU
T15
LIM31
MIX
_BY
P42
19C
LK1813
CO
L
DA
TA
17
28DEMOD_HF
27DEMOD_OUT
11 EMIT
6 EXTBS
FR
EF
C1M
40C
1P
34C2M
39C
2P
35C3M
38C
3P
36
C4M
37C
4P
CE
X
7 AFC
12 BASE
45B
LUE
_VC
C44
BLU
E_V
SS
22B
RO
WN
_VC
C
BR
P_O
FF
23
33
mgc_compsU3220
C32341uF
C32321uF
C32311uF
C32331uF
NUC3236
NUC3237
C32240.1uF
NUR3223
0.22uFC3235
C32400.22uF 10
R3224
0.1uFC3242
0.1uFC3223C3241
1200pFC3227
.01uF
16_8MHz_3_ZIF
CLK_3_ZIF
LVZIF_SEL_1_ZIF
DATA_3_ZIF
2.2uFC3279
.022uFC3278
2.4KR3274
DEMOD
SQ_OUT
DEMOD_1_ZIF
Vdd_FILTERED
Vdd_FILTERED
SHIELD
1
SH3202
16.8
MH
z
DA
TA
LVZ
IF_S
EL
CLK
SH3203SHIELD
1 2 3
VHF Receiver Back End Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
R3206100K
100R3208
R32091K
C3208NU
39KR3207
Q3201RSSI
Y3200XTAL
NUC3201
1G
ND
GN
D1
2 4G
ND
25
GN
D3
3OUT
6IN
2.2KR3211L3201
NU NUC3202L3200
1uH
16pFC3200
IFIF_1_ZIF
RSSI_2_ZIF
RSSI
R32132.2KRSSI_1_ZIF
1uFC3209
RSSI
VSFVSF_3_ZIF
C3214
R3225
0.1uF
1K
Q3202
5V
5V
(SOURCE)Vdd_FILTERED
5V5V_3_ZIF
SWB_PLUS_3_ZIF
SWB+22
R3214
C32121uF 10pF
C32154.7uFC3213
Vdda_3_ZIFLP2980
2G
ND NC
43 ON_OFF*
1VIN
5VOUT
U3201
Vdda
4.7uFC3211
R3218NU
.01uFC3204
0.1uFC3205
R5
2.2KR3201
R5_3_ZIF
R3200150
C3203100pF
4.7K
R32021uHL3202
2.2KR3210
1000pFC3210
4.7KR3212
MMBR941Q3200
R320410
10KR3203 4.7uF
C3218
C3206.01uF
C32072.2pF1K
R3205
10R3226
.022uFC3270 C3271
330pF
Vdd_FILTERED
Vdd_F
R3221100
C3244.01uF
C32220.1uF
.022uFC3243
NUR3222
Vdd_FILTERED
R3219100
C32190.1uF
5V
100pFC3230
.01uFC3221
Q3270BFQ67W
1
3
2
R327147
56pFC3275R3270
1KC32724.7pF
10pFC3273
R327347K33pF
C3274
R327247K
L32712.2uH
L3270100nH
C327647pF
D3270
C327782pF
200KR3276
SHIELDSH3201
1
.01uFC3280
R32751K
http:/
/www.m
yrad
io168
5A-24 Circuit Board/Schematic Diagrams and Parts List
SD3
U3711P3
R
GN
D1
IN5
T
mgc_comps
SWB_PLUS_1_FNSWB+
C37120.1uF
C37132.2uF
SFBASESFCAP
SFIN
VBPASS
NC3
PREIN
PVREF
REFSEL
MODIN
NC1NC2
BIAS2
CCOMP
CEX
DATA
BIAS1
44P
D_G
ND
33P
RE
_GN
D
6D
GN
D22
AG
ND
31
18
1729
42
26
30
21
32
35
27
10
39
98
CLK
7
40mgc_comps
U3701
VR
O13
PD
_VD
D534
PR
E_V
DD
36D
VD
D
20A
VD
D
220pFC3744
220pFC3745C3742
220pF 220pFC3743
CSX
DATA
CLK_1_FN
MODINMODIN_1_FN
CLK
CSX_1_FN
DATA_1_FN
R3751200K
C37534.7uF 1000pF
C3752
R3752330K
TP37021
8.2pF
PRESCC37552.2uF
100pFC3727
PRESC_1_FN
R3727100K
C3726
4G
ND
1
3OUT
Y376175Z04
6.8MHz
GN
D
NUR3760
D3761
R376147K
C3763NU 2.2uF
C3733C3731.01uFC3732
.01uF
L37312.2uH
Vdda_1_FN
.01uFC3734
Vdda
C3751NU
5V
OSC_16.8MHZ
GND2
OU
T3
VCC4
VC
NT
L1
Y3762
VSFVSF_1_FN
C37540.1uF
VHF S
.net
ZMY0130789-O
VCO_MOD_1_FN
VCTRL_1_FN
R5_1_FN
T5_1_FN
VCO_MOD
T5
VCTRL
R5
R5_2_FN
2
4
1
3UMC5N
UMC5Q3721
100R3723
470
1
C37210.1uF
TP3701
5V R37221K
R3721
1uFC3724
SHIELDSH3702
1
SH3701
1
SHIELD
0.1uFC3705 C3714
4.7uFC37064.7uF
(SOURCE)5V_1_FN 5V_2_FN
5V
C3702.01uF
C3703.01uF
C3704.01uF
.01uFC3701
A1
5A2
4A3
K11K22K33
D3701
6
6A1
5A2
4A3
1K1
2K2
3K3
D3702NU
R3702
R3741100
NUC3741
16_8MHz_1_FN16.8MHz
470pF C3715 C3711
10uF390nHL3701
0.1uFC3722
150R3703
22pFC3707
150R3704
R3701100
2.2uFC3710
BIA
S_A
DJ
R370533K
BIAS_ADJ_1_FN
C37080.1uF
0.1uFC3709
NUC3725R3726
NU
4
AD
ER6
NR2
OU
LOCK_1_FNLOCK
220pFC3746
25WARP
28SFOUT
45IADAPT
16INDMULT
43IOUT
LOCK4
46ADAPTSW
37TEST1
38TEST2
48AUX1
1AUX2
2AUX3
3AUX4
15VMULT1
14VMULT2
12VMULT3
11VMULT4
41MODOUT
19FREFOUT
23XTAL1
24XTAL2
47V
CP
TRB_1_FNTRB
39pFC3761
C3762330pF
NU
C3735NU
R3763
R3762NU
6IN
1
1
ynthesizer Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5A-25
RX
L383156nH
56nHL3821
F24
15pFC3825
4.7pFC3826
1uHL3826
BIAS_ADJ_1_VCO
BIAS_ADJ
33KR3823 C3827
.022uF
R3812NU
L383268nH
VCO_MOD
C383615pF
6.8pF
1_VCO
56nHL3833
47nHL3823
D3821
1uHL3824
C383068pF
L3825100nH47nH
L3822
R3828100
.01uFC3828
VCTRL VCTRL_1_VCO
D3831
1uHL3834 C3842
1000pF
C3835
.01uFC3829
VHF Voltage Controlled Oscillator Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
ZMY0130791-O
100R3802
R5_1_VCO
R5
R380622
10R3808
1000pFC3803
0.1uFC3804
RX_INJ_1_VCO
R380524K
100nHL3801
Q3801
R3801NU
NUR3807
220R3803
C3802NU
_INJ
4.7pFC3801
C3810NU
10KR3804
L3811100nH
C38120.1uF
C38110.1uF100nH
L3812
100R3811
100pFC3806
C38054.7pF
15pFC3808
Vdda_3_VCO
R38170
L38131uH
VSF
VSF_1_VCO
Vdda
R3818NU
C3813.01uF
C3818022uF
VC
C_B
UF
FE
RS
14
VC
C_L
OG
IC18
RX_SWITCH7
SUPER_FLTR3
19TRB_IN
TX_BASE16
TX_EMITTER15
TX_IADJ1
TX_OUT10
TX_SWITCH13
GN
D_B
UF
FE
RS
11G
ND
_FLA
G917
GN
D_L
OG
IC
PRESC_OUT12
RX_BASE5
RX_EMITTER6
RX_IADJ2
RX_OUT8
50U54U3801
COLL_RFIN4
FLIP_IN20
1000pFC3815
T5
R383212K
T5_1_VCONU
R3830
R383447
220R3833
1000pFC3832
TRBTRB_1_VCO
R38290
C38334.7pF
C383456pF
47KR3835
PRESCL3816100nH
D3832
10KR3836
VSFPRESC_1_VCO
6.8pFC3816
R38161K
TX_INJ_1_VCO
TX_INJ
27pFC3809 L3809
27nH
VSF
SHIELDSH3802
1
SHIELDSH3801
1
56pC38
220R3821
1000pFC3822
47R3822
33R3825
R383110K
18R3826
.01uFC3823
R382422K
.01uF
C3821
VCO_MOD_http:/
/www.m
yrad
io168
5A-26 Circuit Board/Schematic Diagrams and Parts List
UN
SW
B+
MMBT3906Q3561
R357010K
69K
C3569.022uF
120R3573
120R3571
120R3572
C352810pF
10pFC3525
.022uFC3526
20pFC3524
D3521
1uHL3523
27pFC3535
C35344.7pF
C353120pF
L353243.67nH
C353615pF
L353143.67nH
68pFC3532
C35337.5pF
1 2
H3502HIELD
L355143.67nH
D3551 7.5pFC3550
L35527.66nH
56pFC3552
68pFC3551
39R3551
1
2
3
RF_JACKJ3501
4GND
C353718pF ANTENNA_NUT
TAB11
TAB22
TAB33
TAB445
TAB5
J3502
C353912pF
L353830.54nH
RX_INRX_IN_1_PA
VHF Tr
.net
ZMY0130790-O
DATA_2_PA
CLK_2_PA
R356112K
UNSW_LPLUS_3_PA
CSX_2_PA
UNSWB_LPLUS_2_PA
UN
SW
B+
UN
SW
B+
RE
SE
T
UN
SW
B+
CS
X
DA
TA
CLK
5V
C3570330pF
RESET_1_PA 5V_2_PA
BIAS_TUNING470pFC3571
R355.617
V5E
XT
20V
AR
1
18V
AR
2
24V
AR
3
VG15
VL
6V
LIM
19
QX
1R
FIN
RS
21
31RSET
RX
23T
12
TEMP30
V1014
V4516
CQXDATA28
F1689
8G
ND
1
25GND2
INT
422
NA
Q1110
27BPOS
CEX29
3C
I
CJ
5
CL
7
CLK26
CQ1213U3502
H99S-4
ANO32
C35601uF
NC_U3502_11NC_U3502_12NC_U3502_13
NC_U3502_10NC_U3502_9
NUR3566
C3565.022uF
5185963A15LM50C
100pFC3566
GND POS
2V
OU
T
U3503
3
C3561.022uF
R356233K
R3563270K
330KR3564
220pFC3564
330pFC3509
C3567330pF
NUR3565C3562
3300pF C35633300pF
C3508.022uF
1uFC3516
TX_INJ
R350218
TX_INJ_1_PAC3501330pF
300R3503R3501
300
R3505470
C3504.022uF
68nHL3504C3503
33pF
C350533pF
L350368nH
33pFC3502
L35015.6nH
RFIN16 6
RFOUT1RFOUT2
7VCNTRL
1
VD114
VG12
VG23
4G
ND
15
GN
D2
12G
ND
313
GN
D4
NC18
NC29
NC310
NC415
U350109Z67
17E
P
G211
L3519BEAD
0.1R3519
C35683300pF
12VVR3501
C3521220pF
C3523120pF
L35217.66nH
C3527NU
23.75nHL3522
R3506
L351211.03nH
C351247pF
R35073.9
L351118nH
30pFC3513
3.9
NUC3518
NUC3519
NUL3518
R3513NU
R3512NU
L351513.85nH
C35153300pF
D
GS
Q3501
7.66nHL3513
HEATSINKH3501
C351468pF
C351768pF
22KR3548
100R3545
100R3544
BIAS_TUNING.022uFC3541
C3543.022uF
C3542330pF
330pFC3544
R3543100
R35425.6K
39KR3541
1
TP3502
330pF C3546
R354612K
33KR3547
.022uFC3547
1
1 2 3
SH3501SHIELD
SS
ansmitter Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5A-27
VHF
CircR
B501B501B503
B504
C320C320C320C320C320C320C320C320C320C320C321C321C321C321C321C321C321C321C322C322C322C322C322C322C322C322C322C322C323C323C323C323C323C323C323C323C323C323C324C324C324C324C324
PF, +80% / -20%F, 5%PF, +80% / -20%
F, 10%
pF, 10%
FF
PF, +80% / -20%
PF, +80% / -20%F, 10%PF, +80% / -20%
F, 10%F, 10%PF, +80% / -20%, 0.5 pFF, 5%F, 5%, 10%PF, +80% / -20%
pF, 10%pF, 10%F, 10%uF
F, 5%F, 10%pF, 10%PF, +80% / -20%
F, 10%F, 10%
pF, 10%pF, 10%pF, 10%
Description
C3704 2113743L41 10000 pF, 10%C3705 2113743E20 0.10 uF, 10%C3706 2311049J11 4.7 uF, 10%C3707 2113743N34 22.0 pF, 5%C3708 2113928N01 0.1 uF, 10%C3709 2113928N01 0.1 uF, 10%C3710 2104993J02 2.2 uFC3711 2311049A69 10.0 uF, 20%C3712 2113928N01 0.1 uF, 10%C3713 2311049A09 2.2 uF, 10%C3714 2311049J11 4.7 uF, 10%C3715 2113743L09 470 pF, 10%C3721 2113743E20 0.10 uF, 10%C3722 2113743E20 0.10 uF, 10%C3724 2311049A08 1 uFC3725 NOT PLACEDC3726 2113743N24 8.2 pF, 0.5 pFC3727 2113743N50 100 pF, 5%C3731 2113743L41 10000 pF, 10%C3732 2113743L41 10000 pF, 10%C3733 2104993J02 2.2 uFC3734 2113743L41 10000 pF, 10%C3735 NOT PLACEDC3741 NOT PLACEDC3742 2113743L01 220 pF, 10%C3743 2113743L01 220 pF, 10%C3744 2113743L01 220 pF, 10%C3745 2113743L01 220 pF, 10%C3746 2113743L01 220 pF, 10%C3751 NOT PLACEDC3752 2113743L17 1000 pF, 10%C3753 2311049A56 4.7 uFC3754 2113928N01 0.1 uF, 10%C3755 2104993J02 2.2 uFC3761 2113743N40 39.0 pF, 5%C3762 2113740F63 330 pF, 5%C3763 NOT PLACEDC3801 2113743N18 4.7 pF, 0.25 pFC3802 NOT PLACEDC3803 2113743L17 1000 pF, 10%C3804 2113743E20 0.10 uF, 10%C3805 2113743N18 4.7 pF, 0.25 pFC3806 2113743N50 100 pF, 5%C3808 2113743N30 15.0 pF, 5%C3809 2113743N36 27.0 pF, 5%C3810 NOT PLACEDC3811 2113928N01 0.1 uF, 10%C3812 2113928N01 0.1 uF, 10%C3813 2113743L41 10000 pF, 10%C3815 2113743L17 1000 pF, 10%C3816 2113743N22 6.8 pF, 0.5 pF
CircuitRef
MotorolaPart No. Description
.net
it Board/Schematic Diagrams and Parts List
Radio Parts List (RF Board)
uitef
MotorolaPart No. Description
0986237A02 Battery Contact Module0986237A02 Battery Contact Connector3980502Z01 Contact, Backup B+
(not used in GP328 Plus)3980501Z01 Contact, Backup B-
(not used in GP328 Plus)0 2113743N31 16.0 pF, 5%1 NOT PLACED2 NOT PLACED3 2113743N50 100 pF, 5%4 2113743L41 10000 pF, 10%5 2113928N01 0.1 uF, 10%6 2113743L41 10000 pF, 10%7 2113743N10 2.2 pF, 0.25 pF8 NOT PLACED9 2311049A07 1.0 uF, 10%0 2113743L17 1000 pF, 10%1 2311049A56 4.7 uF2 2311049A07 1.0 uF, 10%3 2311049A56 4.7 uF4 2113928N01 0.1 uF, 10%5 2113743N26 10.0 pF, 5%8 2311049A56 4.7 uF9 2113928N01 0.1 uF, 10%0 2113743N26 10.0 pF, 5%1 2113743L41 10000 pF, 10%2 2113928N01 0.1 uF, 10%3 2113928N01 0.1 uF, 10%4 2113928N01 0.1 uF, 10%5 2113928N01 0.1 uF, 10%6 2113928N01 0.1 uF, 10%7 2113743L41 10000 pF, 10%8 2113743L41 10000 pF, 10%9 2113743N50 100 pF, 5%0 2113740F51 100 pF1 2180478Z20 1.0 uF2 2180478Z20 1.0 uF3 2180478Z20 1.0 uF4 2180478Z20 1.0 uF5 2113743A23 0.220 uF, 10%6 NOT PLACED7 NOT PLACED8 2113743A24 0.330 uF, 10%9 2113743E07 0.022 uF0 2113743A23 0.220 uF, 10%1 2113743L19 1200 pF, 10%2 2109720D14 0.1 uF3 2113743E07 0.022 uF4 2113743L41 10000 pF, 10%
C3270 2113743E07 0.022 uFC3271 2113743L05 330 pF, 10%C3272 2113743N18 4.7 pF, 0.25 pFC3273 2113743N26 10.0 pF, 5%C3274 2113743N38 33.0 pF, 5%C3275 2113743N44 56.0 pF, 5%C3276 2113743N42 47.0 pF, 5%C3277 2113743N48 82.0 pF, 5%C3278 2113743E07 0.022 uFC3279 2311049A40 2.2 uF, 10%C3280 2113743L41 10000 pF, 10%C3301 2113743N20 5.6 pF, 0.5 pFC3302 2113743N54 150 pF, 5%C3303 2113743N30 15.0 pF, 5%C3304 2113743N54 150 pF, 5%C3305 NOT PLACEDC3306 2113928N01 0.1 uF, 10%C3307 2113743N50 100 pF, 5%C3308 2113743L05 330 pF, 10%C3309 2113928N01 0.1 uF, 10%C3310 NOT PLACEDC3311 2113743N54 150 pF, 5%C3312 2113743N31 16.0 pF, 5%C3313 2113743N54 150 pF, 5%C3314 NOT PLACEDC3315 2113743N26 10.0 pF, 5%C3316 2113743N14 3.3 pF, 0.25 pFC3317 2113743N40 39.0 pF, 5%C3318 2113743M08 22000PF, +80% / -20%C3319 NOT PLACEDC3320 2113743N48 82.0 pF, 5%C3321 2113743L05 330 pF, 10%C3322 2113743N50 100 pF, 5%C3323 2113743N50 100 pF, 5%C3324 2113743N38 33.0 pF, 5%C3325 2113743L17 1000 pF, 10%C3326 NOT PLACEDC3327 2113743L05 330 pF, 10%C3329 2113743L05 330 pF, 10%C3330 2113743N50 100 pF, 5%C3331 2113743N50 100 pF, 5%C3332 2113743N40 39.0 pF, 5%C3334 2113743N33 20.0 pF, 5%C3335 2113743N34 22.0 pF, 5%C3336 2311049A18 10 uF, 10%C3337 2113743M08 22000PF, +80% / -20%C3338 2113743L09 470 pF, 10%C3339 2113743N26 10.0 pF, 5%C3501 2113743L05 330 pF, 10%C3502 2113743N38 33.0 pF, 5%C3503 2113743N38 33.0 pF, 5%
CircuitRef
MotorolaPart No. Description
C3504 2113743M08 22000C3505 2113743N38 33.0 pC3508 2113743M08 22000C3509 2113743L05 330 pC3512 2113740F43 47 pFC3513 2113740F38 30 pFC3514 2113740F47 68 pFC3515 2113743L29 3300C3516 2311049A08 1 uFC3517 2113740F47 68 pFC3518 NOT PLACEDC3519 NOT PLACEDC3521 2111078B51 220 uC3523 2111078B44 120 uC3524 2113740F34 20 pFC3525 2113740F27 10 pFC3526 2113743M08 22000C3527 NOT PLACEDC3528 2113740F27 10 pFC3531 2113740F34 20 pFC3532 2113740F47 68 pFC3533 2113740F24 7.5 pFC3534 2113740F19 4.7 pFC3535 2113740F37 27 pFC3536 2113740F31 15 pFC3537 2113740F33 18 pFC3539 2113740F29 12 pFC3541 2113743M08 22000C3542 2113743L05 330 pC3543 2113743M08 22000C3544 2113743L05 330 pC3546 2113743L05 330 pC3547 2113743M08 22000C3550 2113743N23 7.5 pFC3551 2113743N46 68.0 pC3552 2113743N44 56.0 pC3560 2311049A07 1.0 uFC3561 2113743M08 22000C3562 2113743L29 3301C3563 2113743L29 3302C3564 2113743L01 220 pC3565 2113743E07 0.022C3566 2113743N50 100 pC3567 2113743L05 330 pC3568 2113743L29 3303C3569 2113743M08 22000C3570 2113743L05 330 pC3571 2113743L09 470 pC3701 2113743L41 10000C3702 2113743L41 10000C3703 2113743L41 10000
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
5A-28 Circuit Board/Schematic Diagrams and Parts List
C3818C3821C3822C3823C3824C3825C3826C3827C3828C3829C3830C3832C3833C3834C3835C3836C3842C502C503C505C511C512C513C514C520C521C522C523C525C526C527C528C529C530C531C532C533C534C535C536C537C538C539C540C541C542C543C544C545C546C547
CircuiRef
, 5%
10%, 20%5%%5%5%, 10%5%%%%, 5%5%, 5%%%%, 5%10%ch Switchch Switchch Switchch Switchr NPN MMBR941r MMBT3904r MMBT3904istor BFQ67Wr MMBT3904r NPN MMBR941r 8W 175MHzP 40V
r Dual NPN / PNPr NPN MMBR941
nsistor NPNr MMBT3904
escription
R3208 0662057M50 100, 5%R3209 0662057M74 1000, 5%R3210 0662057M82 2200, 5%R3211 0662057M82 2200, 5%R3212 0662057M90 4700, 5%R3213 0662057M82 2200, 5%R3214 0662057M34 22, 5%R3218 NOT PLACEDR3219 0662057M50 100, 5%R3220 0662057M90 4700, 5%R3221 0662057M50 100, 5%R3222 NOT PLACEDR3223 NOT PLACEDR3224 0662057M26 10, 5%R3225 0662057M74 1000, 5%R3226 0662057M26 10, 5%R3270 0662057M74 1000, 5%R3271 0662057M42 47, 5%R3272 0662057N15 47 k, 5%R3273 0662057N15 47 k, 5%R3274 0662057M83 2400, 5%R3275 0662057M74 1000, 5%R3276 0662057N30 200 k, 5%R3301 NOT PLACEDR3303 0662057N23 100 k, 5%R3304 0662057N23 100 k, 5%R3305 0662057N19 68 k, 5%R3306 0662057M82 2200, 5%R3307 0662057N11 33 k, 5%R3308 0662057M78 1500, 5%R3309 0662057M92 5600, 5%R3310 0662057M98 10 k, 5%R3311 0662057M26 10, 5%R3312 0662057M38 33, 5%R3313 0662057M34 22, 5%R3314 0662057M26 10, 5%R3315 0662057M62 330, 5%R3316 0662057M66 470, 5%R3317 0662057N23 100 k, 5%R3318 0662057M66 470, 5%R3319 NOT PLACEDR3320 NOT PLACEDR3321 0662057M54 150, 5%R3322 0662057M58 220, 5%R3323 0662057M32 18, 5%R3324 0662057M58 220, 5%R3501 0662057M61 300, 5%R3502 0662057M32 18, 5%R3503 0662057M61 300, 5%R3505 0662057M62 330, 5%R3506 0662057B62 3.9, 5%
CircuitRef
MotorolaPart No. Description
.net
2113743E07 0.022 uF2113743L41 10000 pF, 10%2113743L17 1000 pF, 10%2113743L41 10000 pF, 10%2113743N44 56.0 pF, 5%2113743N30 15.0 pF, 5%2113743N18 4.7 pF, 0.25 pF2113743E07 0.022 uF2185895Z01 0.01 uF2185895Z01 0.01 uF2113743N46 68.0 pF, 5%2113743L17 1000 pF, 10%2113743N18 4.7 pF, 0.25 pF2113743N44 56.0 pF, 5%2113743N22 6.8 pF, 0.5 pF2113743N30 15.0 pF, 5%2113743L17 1000 pF, 10%2311049A05 0.47 uF, 10%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743L41 10000 pF, 10%2113743L41 10000 pF, 10%2113743L41 10000 pF, 10%2113743L17 1000 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%NOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%2113743L09 470 pF, 10%
t MotorolaPart No. Description
C548 NOT PLACEDC549 2113743L09 470 pF, 10%C550 2113743L09 470 pF, 10%C551 2113743L09 470 pF, 10%C552 2113743L09 470 pF, 10%C553 2113743L09 470 pF, 10%C555 2113743L09 470 pF, 10%CR3301 4802245J42 Ring Quad DiodeCR3302 4805129M96 Dual Bond DiodeCR3303 4880154K03 Dual Diode MMBD353CR501 4880107R01 RectifierCR503 4805729G49 Red / Yellow DiodeD3270 4862824C01 Varactor DiodeD3301 4802081B58 Dual DiodeD3302 4802081B58 Dual DiodeD3521 4880973Z02 PIN DiodeD3551 4880973Z02 PIN DiodeD3701 4802233J09 Triple DiodeD3702 4802233J09 Triple DiodeD3761 4862824C03 Varactor DiodeD3821 4805649Q13 Varactor DiodeD3831 4805649Q13 Varactor DiodeD3832 4862824C01 Varactor DiodeF501 6580542Z01 Fuse 3AH3501 2680499Z01 Heat SpreaderJ200 0905505Y04 Conn ZIF HorizontalJ3501 0985613Z01 RF JackJ3502 0280519Z02 Antenna NutL3200 2462587N68 1000 nH, 5%L3201 NOT PLACEDL3202 2462587N68 1000 nH, 5%L3221 2462587N68 1000 nH, 5%L3270 2462587T15 100 nH, 5%L3271 2462587Q20 2200 nH, 20%L3301 2462587T35 12 nH, 5%L3303 2462587T35 12 nH, 5%L3304 2462587T23 470 nH, 5%L3305 2462587T35 12 nH, 5%L3306 2462587T35 12 nH, 5%L3308 2462587T34 10 nH, 5%L3309 2462587N55 150 nH, 5%L3312 2462587V28 33 nH, 5%L3501 2413926H09 5.6 nH, 0.3 nHL3503 2462587V32 68 nH, 5%L3504 2462587N51 68 nH, 5%L3511 2462587N44 18 nH, 5%L3512 2479990B01 11.03 nHL3513 2479990A02 7.66 nHL3515 2479990C03 13.85 nHL3518 NOT PLACEDL3519 2484657R01 Inductor Bead Chip
CircuitRef
MotorolaPart No. Description
L3521 2479990A02 7.66 nHL3522 2479990E01 23.75 nHL3523 2462587N68 1000 nHL3531 2479990N01 43.67 nHL3532 2479990N01 43.67 nHL3538 2479990M01 30.54 nHL3551 2479990N01 43.67 nHL3552 2479990A02 7.66 nHL3701 2462587Q42 390 nH,L3731 2462587Q20 2200 nHL3801 2462587V34 100 nH,L3809 2462587V27 27 nH, 5L3811 2462587V34 100 nH,L3812 2462587V34 100 nH,L3813 2462587Q47 1000 nHL3816 2462587V34 100 nH,L3821 2462587N50 56 nH, 5L3822 2462587N49 47 nH, 5L3823 2462587N49 47 nH, 5L3824 2462587N68 1000 nHL3825 2462587V34 100 nH,L3826 2462587N68 1000 nHL3831 2462587N50 56 nH, 5L3832 2462587N51 68 nH, 5L3833 2462587N50 56 nH, 5L3834 2462587N68 1000 nHL505 2462587Q42 390 nH,PB501 4070354A01 Light TouPB502 4070354A01 Light TouPB504 4070354A01 Light TouPB505 4070354A01 Light TouQ3200 4813827A07 TransistoQ3201 4880214G02 TransistoQ3202 4880214G02 TransistoQ3270 4805218N63 RF TransQ3301 4880214G02 TransistoQ3302 4813827A07 TransistoQ3501 4813828A08 TransistoQ3561 4813824A17 XSTR PNQ3721 4809939C05 TransistoQ3801 4813827A07 TransistoQ502 5180159R01 Dual TraQ505 4880214G02 TransistoR3200 0662057M54 150 , 5%R3201 0662057M82 2200, 5%R3202 0662057M90 4700, 5%R3203 0662057M98 10 k, 5%R3204 0662057M26 10, 5%R3205 0662057M74 1000, 5%R3206 0662057N23 100 k, 5%R3207 0662057N13 39 k, 5%
CircuitRef
MotorolaPart No. D
http:/
/www.m
yrad
io168
Circu 5A-29
g only
R350R351R351R351R354R354R354R354R354R354R354R354R355R356R356R356R356R356R356R356R357R357R357R357R370R370R370R370R370R372R372R372R372R372R374R375R375R376R376R376R376R380R380R380R380R380R380R380R380R381R381
CircR
gulatoruffer
ener Diodeener Diode
ener Diodeener Diodeilterl 16.8 MHz
BBBB
Description
.net
it Board/Schematic Diagrams and Parts List
* Motorola Depot Servicin
7 0662057B62 3.9, 5%2 NOT PLACED3 NOT PLACED9 0680539Z01 Power Metal Strip Resistor1 0662057N13 39 k, 5%2 0662057M92 5600, 5%3 0662057M50 100, 5%4 0662057A25 100, 5%5 0662057A25 100, 5%6 0662057N01 12 k, 5%7 0662057N11 33 k, 5%8 0662057N07 22 k, 5%1 0662057M40 39, 5%1 0662057N01 12 k, 5%2 0662057N11 33 k, 5%3 0662057N33 270 k, 5%4 0662057N35 330 k, 5%5 NOT PLACED6 NOT PLACED9 0662057M92 5600, 5%0 0662057M98 10 k, 5%1 0662057A27 120, 5%2 0662057A27 120, 5%3 0662057A27 120, 5%1 0662057M50 100, 5%2 NOT PLACED3 0662057M54 150, 5%4 0662057M54 150, 5%5 0662057N11 33 k, 5%1 0662057M66 470, 5%2 0662057M74 1000, 5%3 0662057M50 100, 5%6 NOT PLACED7 0662057N23 100 k, 5%1 0662057M50 100, 5%1 0662057N30 200 k, 5%2 0662057N35 330 k, 5%0 NOT PLACED1 0662057N15 47 k, 5%2 NOT PLACED3 NOT PLACED1 NOT PLACED2 0662057M50 100, 5%3 0662057M58 220, 5%4 0662057M98 10 k, 5%5 0662057N08 24 k, 5%6 0662057M34 22, 5%7 NOT PLACED8 0662057M26 10, 5%1 0662057M50 100, 5%2 NOT PLACED
uitef
MotorolaPart No. Description
R3816 0662057M74 1000, 5%R3817 0662057M01 0, 5%R3818 NOT PLACEDR3821 0662057M58 220, 5%R3822 0662057M42 47, 5%R3823 0662057N11 33 k, 5%R3824 0662057N07 22 k, 5%R3825 0662057M38 33, 5%R3826 0662057M32 18, 5%R3828 0662057M50 100, 5%R3829 0662057M01 0, 5%R3830 NOT PLACEDR3831 0662057M98 10 k, 5%R3832 0662057N01 12 k, 5%R3833 0662057M58 220, 5%R3834 0662057M42 47, 5%R3835 0662057N15 47 k, 5%R3836 0662057M98 10 k, 5%R501 0662057M70 680, 5%R502 0662057M56 180, 5%R505 0662057M98 10 k, 5%R506 0662057N15 47 k, 5%R509 0662057M01 0, 5%
(not used in GP328 Plus)RT3301 NOT PLACEDS501 4080710Z01 Channel SwitchS502 1880619Z02 Potentiometer (Volume)SH3201 2602023X08 Shield DiplexerSH3202 2686081B02 Shield, for GSM PlacementSH3203 2686081B03 Shield, for GSM PlacementSH3301 2686081B01 Shield, for GSM PlacementSH3302 2686081B05 Shield, for GSM PlacementSH3303 2686081B06 Shield, for GSM PlacementSH3501 2686081B03 Shield, for GSM PlacementSH3502 2686081B04 Shield, for GSM PlacementSH3701 2680511Z01 Shield, SynthesizerSH3702 2680511Z01 Shield, SynthesizerSH3801 2680513Z01 Shield, VCO TopSH3802 2680514Z01 Shield, VCO Bottom / LVZIFT3301 2580541Z02 Balun TransformerT3302 2580541Z02 Balun TransformerTP3301 NOT PLACEDTP3502 NOT PLACEDTP3701 NOT PLACEDTP3702 NOT PLACEDU3201 5102463J58 3.3V RegulatorU3220 5109632D83 LVZIFU3501 5185130C65 LDMOS DriverU3502 5185765B26 PCICU3503 5185963A15 Temperature Sensor ICU3701 5185963A27 LVFRACN
CircuitRef
MotorolaPart No. Description
U3711 5105739X05 5V ReU3801 5105750U54 VCO BVR3501 4880140L17 12V ZVR439 4880140L17 12V ZVR440 NOT PLACEDVR441 NOT PLACEDVR444 NOT PLACEDVR501 4802245J73 6.8V ZVR506 4802245J73 6.8V ZY3200 9186153B01 X’tal FY3761 4805875Z04 CrystaY3762 NOT PLACED
8404055G05 RF PC8404055G06 RF PC8404055G07 RF PC8404055G09 RF PC
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
5A-30 Circuit Board/Schematic Diagrams and Parts List
.net
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
Troubleshooting Charts 5A-31
9.0 Troubleshooting Charts
MCU Check
Power UpAlert Tone
OK?
SpeakerOK?
U409 EXTAL=7.3728 MHz?
U3701 Pin 1916.8 MHz
5V at U3711?3.3V at U3201?
U409 Reset Pin94 High?
MCU is OK
Not able to pro-gram RF Board
ICs
Before replacingMCU, check SPI
clock, SPI data, andRF IC select
Replace Speaker
Read Radio OK?CheckSetup
Reprogram thecorrect data.
See FGUTroubleshooting
7.5V atPin 3/5 U3711?7.5V at Pin 1
U3201
CheckQ400
Replace U3711/U3201
Check any short toSWB+,
Vdda or Vddd
Press PTT. RedLED does not
light up
PTT U409 Pin53
low?
Press PTTQ502-2 High?
CheckPB504
CheckQ502-2voltage
LEDQ502,R501
OK?
ReplaceFaulty
Component
CheckAccessories
J403 OPT_SEL_1& OPT_SEL_2
Pin 8 & 9low?
Radio couldnot PTT
externally
U409Pin 52, 6
low?
See FGUTroubleshooting
chart
LED shouldlight up
CheckMCU
PTT
NO
YES
YES
No
No
NO
YES YES
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
YES
YES
NO
NO
YES
EXTSPKR
EXTPTT
INTAUDIO
J403 Pin 9 low?Pin 8 high?
ASFIC U404 Pin14 & 15 high?
CheckAccessories
CheckU404
CheckU420 Audio PA
NO
NO
YES
YES
J403 Audioat Pin 2 &
Pin 3
Check Spk. FlexConnection
Audio atAudioPA
(U420) input(U447)
Audio from Pin 41ASFIC, U404?
Check ASFICU404
CheckAudio PA(U420)
CheckU3220LV ZIF
Audio atPin 2
U404?
NO
NO
NO
YES
YES
NO
YES
Troubleshooting Flow Chart for Controller
http:/
/www.m
yrad
io168
.net
5A-32 Troubleshooting Charts
Bad SINADBad 20dB Quieting
No Recovered Audio
START
Audio at pin 27of U3220?
Check ControllerYes
No
Spray of inject 1st IF intoXTAL Filter
IF Freq: 45.1MHz
Audio heard?BYes
No
Check 2nd LO ControlVoltage at C3279
VCO locked?BYes
16.8 MHzcheck at pin 21
U3220?
Activity onU3220 sel pin?
Check FGU
No
No
A
A
Yes
Check Q3270 bias cir-cuitry for faults.
Rotate Freq. Knob
Check controller.
Before replacing U3220, check 2ndVCO Q3270. Check VCO O/P level,
C3272, C3273.
Yes
No
Troubleshooting Flow Chart for Receiver (Sheet 1 of 2)
http:/
/www.m
yrad
io168
.net
Troubleshooting Charts 5A-33
IF Signal atC3200?
No
RF Signal atT3301?
RF Signal atR3313?
No
RF Signal atC3306?
No
RF Signal atC3302?
No or
Check harmonic filter L3531 & L3532,C3532 and ant. switches D3521, D3551,L3551, R3551, C3551, C3552, L3552
Check filter betweenC3302 & C3306; programfilter to schematic test freq
and checkvaractor voltages.
Inject RF into J3501
Are varactorvoltages OK?
No
Yes
Check RF amp (Q3302)Stage.
Check filter between C3313& T3301.
Yes
Check T3301, T3302,CR3301, R3321, R3322,
R3323Yes
1st LO O/POK?
Locked?
Yes
Check FGU
Yes
Trace IF signalfrom C3200 to
Q3200. Check forbad XTAL filter.
No
Yes Q3200 collec-tor OK?IF signalpresent?
Before replacingU3220, check
U3220 voltages;trace IF signal
path.
Yes
Check for 2.9VDC
Is R5 present?
Check Q3721, U3701(pin 48) voltages and
U247
No
No
No
Check U404 voltage and ifU404 can be selected by MCU
before replacing U404.
Check varactor filter.
No
Yes
Yes
Yes
A
A
B
weak RF
Troubleshooting Flow Chart for Receiver (Sheet 2 of 2)
http:/
/www.m
yrad
io168
.net
5A-34 Troubleshooting Charts
START
No Power
Is There B+Bias for Ant
switch
Check Q3561
Is CurrentOK?
Is Control VoltageHigh or Low
Check PCIC
1. Check Pin Diodes2. Check Harmonic Filter
Inspect/Repair Tx. Out-put Network
Is PowerOK?
Done
Check Drive toModule
Is DriveOK? Troubleshoot
VCO
Inspect PA Network/CheckPower Out of U3501 at Cap
C3512
Is PowerOK?
Replace U3501
Is PowerOK?
Replace Q3501
Done
Done
No
Yes
Yes No
No
Yes
Low
High
No
Yes
Yes
No
Yes
No
Troubleshooting Flow Chart for Transmitter
http:/
/www.m
yrad
io168
.net
Troubleshooting Charts 5A-35
5Vat pin 6 of
D3701
Is informationfrom µP U409
correct?
Is U3 701Pin 18 AT4.54 VDC?
Is U3701 Pin 47AT = 13 VDC
Is U3701 Pin 19<0.7 VDC in RX &>4.3 VDC in TX?
Start
Visualcheck of theBoard OK?
CorrectProblem
Check 5VRegulator
+5V at U3701Pin’s
13 & 30?
Is 16.8MHzSignal at
U3701 Pin 19?
Check Y3761, C3761,C3762, C3763, D3761
& R3761
Are signalsat Pin’s 14 &15 of U3701?
CheckL3701,R3701
Check Q260,Q261 & R260
U3701 pin 2 at>3V in Tx and<0.7V in Rx
RemoveShorts
Is there a shortbetween Pin 47 and
Pins 14 & 15 ofU3701?
Replace orresolder
necessarycomponents
Is RF level atU3701 Pin 32
>-30 dBm?
Are C3721,C3722,C3723,R3721, R3722,
R3723 OK?
Replace U3701
If R3727, C3726 & C3727are OK, then see VCOtroubleshooting chart
Are Waveformsat Pins 14 & 15
triangular?
Do Pins 7,8 & 9of U3701 togglewhen channel is
changed?
Check programminglines between U409
and U3701 Pins 7,8 & 9
Replace U3701
Check uP U409Troubleshooting
Chart
NO
YES
NO
YES
NO
YES
NO
YES
NO
NO
NO
YES
YES
NO
YES
YES
NO
YES
YES
YES
NO
NO
NO
NO
YES
NO
YES
YES
Check D3701, D3702,U3701, C3701 -
C3707
3.3V at U3701pins 5, 20, 34 &
36
Check U3201,L3731
Is16.8MHzsignal at
U3701 pin23?
ReplaceU3701
YES
NO
NO
YES
NO
YES
Troubleshooting Flow Chart for Synthesizer
Replace U3701
http:/
/www.m
yrad
io168
.net
5A-36 Troubleshooting Charts
START
No LO?
Tx Carrier?
VCO OK
CheckR3829
TRB = 3.2V?Pin 10>1V?
L3831,L3832,
L3833 O/C?
Change L3831,L3832
ChangeU3801
AUX 3High?
Check U3701Pin 2 for 3.2V
Pin 19 =0V
AUX 3Low?
ChangeU3801
V ctrl 0Vor 13V? L3821,
L3822, L3823Open Circuit?
ChangeU3801
ChangeL3821,L3822,
L3823,L243
ChangeU3701
Check for faulty parts or dryjoints of L3812 C3806,R3806, R3802 & L3801
A
A
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
Check R3811, L3811for dry joint or faulty
No
Troubleshooting Flow Chart for VCO
Yes
http:/
/www.m
yrad
io168
.net
5B-1
Section 5B
MODEL CHART AND TEST SPECIFICATIONS (403-470MHZ)
1.0 Model Chart
GP Series, UHF Band 1, 403-470 MHzModel Description
AZH38RDC9AA3 GP328 Plus 403-470 MHz 4W 16 CH
AZH38RDH9AA6 GP338 Plus 403-470 MHz 4W 128 CH
Item Description
X PMUE1699 GP328 Plus Super Tanapa 403-470 MHz 4W 16CH
X PMUE1700 GP338 Plus Super Tanapa 403-470 MHz 4W 128CH
X PMUE1703 GP328 Plus Tanapa 403-470 MHz 4W 16CH
X PMUE1704 GP338 Plus Tanapa 403-470 MHz 4W 128CH
X JMHE4001 GP328 Plus B/C Kit 403-470 MHz 4W 16CH
X PMHE4010 GP338 Plus B/C Kit 403-470 MHz 4W 128CH
X PMHE4000 GP328 Plus Front Housing Kit 16CH
X PMHE4001 GP338 Plus Front Housing Kit 128CH
X X NAE6483 Monopole (Whip) antenna (403-520 MHz)
X X PMAE4002 UHF 9 cm antenna (403-433 MHz) Stubby
X X PMAE4003 UHF 9 cm antenna (430-470 MHz)
X 6804022G48 GP328 Plus User Guide
X 6804112J64 GP338 Plus User Guide
x = Indicates one of each is required.
http:/
/www.m
yrad
io168
.net
5B-2 Specifications (for GP328 Plus)
2.0 Specifications (for GP328Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
UHF
Frequency: 403-470 MHz
Channel Capacity: GP328 Plus : 16 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x30.5mm
101mm x 55.5mm x35.5mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
250 g
270 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
Low Pow-er
>10 hrs
>14 hrs
High Pow-er
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT4844
UHF
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 403-470 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
UHF12.5kHz
UHF 20/25kHz
Frequency: 403-470MHz
403-470MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
Specifications (for GP338 Plus) 5B-3
3.0 Specifications (for GP338Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
UHF
Frequency: 403-470 MHz
Channel Capacity: GP338 Plus : 128 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x33.0mm
101mm x 55.5mm x38.0mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
265 g
285 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT4844
UHF
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 403-470 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
UHF12.5kHz
UHF 20/25kHz
Frequency: 403-470MHz
403-470MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
5B-4 Transmitter
4.0 Transmitter
4.1 General(Refer to Figure 5-1)
The UHF transmitter contains five basic circuits:
1. Power Amplifier
2. Antenna Switch
3. Harmonic Filter
4. Antenna Matching Network
5. Power Control Integrated Circuit (PCIC).
4.1.1 Power Amplifier
The power amplifier consists of two devices:
1. 9Z67 LDMOS driver IC (U101) and
2. PRF1507 LDMOS PA (Q110).
The 9Z67 LDMOS driver IC contains a 2 stage amplification with a supply voltage of 7.3V.
This RF power amplifier is capable of supplying an output power of 0.3W (pin 6 and 7) with an inputsignal of 2mW (3dBm) (pin16). The current drain would typically be 160mA while operating in thefrequency range of 403-470MHz.
The PRF1507 LDMOS PA is capable of supplying an output power of 7W with an input signal of0.3W. The current drain would typically be 1300mA while operating in the frequency range of 403-470MHz. The power output can be varied by changing the biasing voltage.
Figure 5-1: Transmitter Block Diagram
PCIC
Antenna
P ADriver
Vcontrol Vcontrol
From VCO
Jack
PA-FinalStage
Antenna Switch/Harmonic Filter/
Matching Network
http:/
/www.m
yrad
io168
.net
Transmitter 5B-5
4.1.2 Antenna Switch
The antenna switch circuit consists of two PIN diodes (CR101 and CR102), a pi network (C107, L104and C106), and two current limiting resistors (R101, R170). In the transmit mode, B+ at PCIC (U102)pin 23 will go low and turn on Q111 where a B+ bias is applied to the antenna switch circuit to bias thediodes "on". The shunt diode (CR102) shorts out the receiver port, and the pi network, whichoperates as a quarter wave transmission line, transforms the low impedance of the shunt diode to ahigh impedance at the input of the harmonic filter. In the receive mode, the diodes are both off, andhence, there exists a low attenuation path between the antenna and receiver ports.
4.1.3 Harmonic Filter
The harmonic filter consists of C104, L102, C103, L101 and C102. The design of the harmonic filterfor UHF is that of a modified Zolotarev design. It has been optimized for efficiency of the powermodule. This type of filter has the advantage that it can give a greater attenuation in the stop-band fora given ripple level. The harmonic filter insertion loss is typically less than 1.2dB.
4.1.4 Antenna Matching Network
A matching network which is made up of L116 is used to match the antenna's impedance to theharmonic filter. This will optimize the performance of the transmitter and receiver into an antenna.
4.1.5 Power Control Integrated Circuit (PCIC)
The transmitter uses the Power Control IC (PCIC), U102 to regulate the power output of the radio.The current to the final stage of the power module is supplied through R101, which provides a voltageproportional to the current drain. This voltage is then fedback to the Automatic Level Control (ALC)within the PCIC to regulate the output power of the transmitter.
The PCIC has internal digital to analog converters (DACs) which provide the reference voltage of thecontrol loop. The reference voltage level is programmable through the SPI line of the PCIC.
There are resistors and integrators within the PCIC, and external capacitors (C133, C134 and C135)in controlling the transmitter rising and falling time. These are necessary in reducing the powersplatter into adjacent channels.
CR105 and its associated components are part of the temperature cut back circuitry. It senses theprinted circuit board temperature around the transmitter circuits and output a DC voltage to the PCIC.If the DC voltage produced exceeds the set threshold in the PCIC, the transmitter output power will bereduced so as to reduce the transmitter temperature.
http:/
/www.m
yrad
io168
.net
5B-6 Receiver
5.0 Receiver
5.1 Receiver Front-End(Refer to UHF Receiver Front End Schematic Diagram on page 5B-21 and UHF TransmitterSchematic Diagram on page 5B-25)
The RF signal is received by the antenna and applied to a low-pass filter. For UHF, the filter consistsof L101, L102, C102, C103, C104. The filtered RF signal is passed through the antenna switch. Theantenna switch circuit consists of two PIN diodes(CR101 and CR102) and a pi network (C106, L104and C107).The signal is then applied to a varactor tuned bandpass filter. The UHF bandpass filtercomprises of L301, L302, C302, C303, C304, CR301 and CR302. The bandpass filter is tuned byapplying a control voltage to the varactor diodes(CR301 and CR302) in the filter.
The bandpass filter is electronically tuned by the DACRx from IC404 which is controlled by themicroprocessor. Depending on the carrier frequency, the DACRx will supply the tuned voltage to thevaractor diodes in the filter. Wideband operation of the filter is achieved by shifting the bandpass filteracross the band.
The output of the bandpass filter is coupled to the RF amplifier transistor Q301 via C307. After beingamplified by the RF amplifier, the RF signal is further filtered by a second varactor tuned bandpassfilter, consisting of L306, L307, C313, C317, CR304 and CR305.
Both the pre and post-RF amplifier varactor tuned filters have similar responses. The 3 dB bandwidthof the filter is about 50 MHz. This enables the filters to be electronically controlled by using a singlecontrol voltage which is DACRx .
Figure 5-2: UHF Receiver Block Diagram
Demodulator
Synthesizer
CrystalFilter
MixerVaractorTuned Filter
RF AmpVaractorTuned Filter
Pin DiodeAntennaSwitchRF Jack
Antenna
AGC
Control Voltagefrom ASFIC
First LOfrom FGU
Recovered AudioSquelch
RSSI
IF IC
SPI Bus
16.8 MHzReference Clock
SecondLO VCO
U301
IF Amp
http:/
/www.m
yrad
io168
.net
Receiver 5B-7
The output of the post-RF amplifier filter which is connected to the passive double balanced mixerconsists of T301, T302 and CR306. Matching of the filter to the mixer is provided by C381. Aftermixing with the first LO signal from the voltage controlled oscillator (VCO) using low side injection, theRF signal is down-converted to the 45.1 MHz IF signal.
The IF signal coming out of the mixer is transfered to the crystal filter (FL301) through a resistor padand a diplexer (C322 and L310). Matching to the input of the crystal filter is provided by C324 andL311. The crystal filter provides the necessary selectivity and intermodulation protection.
5.2 Receiver Back-End(Refer to UHF Receiver Back End Schematic Diagram on page 5B-22)
The output of crystal filter FL301 is matched to the input of IF amplifier transistor Q302 bycomponents R352 and C325. Voltage supply to the IF amplifier is taken from the receive 5 volts (R5).The IF amplifer provides a gain of about 7dB. The amplified IF signal is then coupled into U301(pin 3)via C330, C338 and L330 which provides the matching for the IF amplifier and U301.
The IF signal applied to pin 3 of U301 is amplified, down-converted, filtered, and demodulated, toproduce the recovered audio at pin 27 of U301. This IF IC is electronically programmable, and theamount of filtering (which is dependent on the radio channel spacing) is controlled by themicroprocessor. Additional filtering, once externally provided by the conventional ceramic filters, isreplaced by internal filters in the IF module (U301).
The IF IC uses a type of direct conversion process, whereby the externally generated second LOfrequency is divided by two in U301 so that it is very close to the first IF frequency. The IF IC (U301)synthesizes the second LO and phase-locks the VCO to track the first IF frequency. The second LOis designed to oscillate at twice the first IF frequency because of the divide-by-two function in the IFIC.
In the absence of an IF signal, the VCO will “search” for a frequency, or its frequency will vary close totwice the IF frequency. When an IF signal is received, the VCO will lock onto the IF signal. Thesecond LO/VCO is a Colpitts oscillator built around transistor Q320. The VCO has a varactor diode,CR310, to adjust the VCO frequency. The control signal for the varactor is derived from a loop filterconsisting of C362, C363, C364, R320 and R321.
The IF IC (U301) also performs several other functions. It provides a received signal-strengthindicator (RSSI) and a squelch output. The RSSI is a dc voltage monitored by the microprocessor,and used as a peak indicator during the bench tuning of the receiver front-end varactor filter. TheRSSI voltage is also used to control the automatic gain control (AGC) circuit at the front-end.
The demodulated signal on pin 27 of U301 is also used for squelch control. The signal is routed toU404 (ASFIC) where squelch signal shaping and detection takes place. The demodulated audiosignal is also routed to U404 for processing before going to the audio amplifier for amplification.
http:/
/www.m
yrad
io168
.net
5B-8 Receiver
5.3 Automatic Gain Control Circuit(Refer to UHF Receiver Front End Schematic Diagram on page 5B-21)
The front end automatic gain control circuit is to provide automatic gain reduction of the front end RFamplifier via feedback. This action is necessary to prevent overloading of back end circuits. This isachieved by drawing some of the output power from the RF amplifier’s output. At high radiofrequencies, capacitor C331 provides the low impedance path to ground for this purpose. CR308 is aPIN diode used for switching the path on or off. A certain amount of forward biasing current is neededto turn the PIN diode on. Transistors Q315 provides this current where upon saturation, current willflow via R347, PIN diode, collector and emitter of Q315 and R319 before going to ground. Q315 is anNPN transistor used for switching here. Maximum current flowing through the PIN is mainly limited bythe resistor R319.
Radio signal strength indicator, RSSI, a voltage signal, is used to drive Q315 to saturation henceturning it on. RSSI is produced by U301 and is proportional to the gain of the RF amplifier and theinput RF signal power to the radio.
Resistor network at the input to the base of Q315 is scaled to turn on Q315, hence activating theAGC, at certain RSSI levels. In order to turn on Q315, the voltage across the transistor’s base toground must be greater or equal to the voltage across R319, plus the base-emitter voltage (Vbe)present at Q315. The resistor network with thermistor RT300 is capable of providing temperaturecompensation to the AGC circuit, as RSSI generated by U301 is lower at cold temperaturescompared to normal operation at room temperature. Resistor R300 and capacitor C397 form an R-Cnetwork used to dampen any transient instability while the AGC is turning on.
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5B-9
6.0 Frequency Generation Circuitry
The Frequency Generation Circuitry is composed of two main ICs, the Fractional-N synthesizer(U201), and the VCO/Buffer IC (U241). Designed in conjunction to maximize compatibility, the twoICs provide many of the functions that normally would require additional circuitry. The synthesizerblock diagram illustrates the interconnect and support circuitry used in the region. Refer to therelevant schematics for the reference designators.
The synthesizer is powered by regulated 5V and 3.3V which come from U247 and U248 respectively.The synthesizer in turn generates a superfiltered 4.5V which powers U241.
In addition to the VCO, the synthesizer must interface with the logic and ASFIC circuitry.Programming for the synthesizer is accomplished through the data , clock and chip select lines fromthe microprocessor. A 3.3V dc signal from synthesizer lock detect line indicates to the microprocessorthat the synthesizer is locked.
Transmit modulation from the ASFIC is supplied to pin10 of U201. Internally the audio is digitized bythe Fractional-N and applied to the loop divider to provide the low-port modulation. The audio runsthrough an internal attenuator for modulation balancing purposes before going out to the VCO.
Figure 5-3: Frequency Generation Unit Block Diagram
VoltageMultiplier
SynthesizerU201
DualTran-sistor
LoopFilter
VCOBICU241
LowPassFilter
MatchingNetwork
Attenuator
ToMixer
ToPA Driver
VCP
Vmult1Aux3
Aux4
MOD Out
ModulatingSignal
Vmult2
Rx VCO Circuit
Tx VCO Circuit
TRB
16.8 MHzRef. Osc.
Rx Out
Tx Out
http:/
/www.m
yrad
io168
.net
5B-10 Frequency Generation Circuitry
6.1 Synthesizer(Refer to UHF Synthesizer Schematic Diagram on page 5B-23)
The Fractional-N Synthesizer uses a 16.8MHz crystal (FL201) to provide a reference for the system.The LVFractN IC (U201) further divides this to 2.1MHz, 2.225MHz, and 2.4MHz as referencefrequencies. Together with C206, C207, C208, R204 and CR203 , they build up the referenceoscillator which is capable of 2.5ppm stability over temperatures of -30 to 85×C. It also provides16.8MHz at pin 19 of U201 to be used by ASFIC and LVZIF.
The loop filter which consist of C231, C232, C233, R231, R232 and R233 provides the necessary dcsteering voltage for the VCO and determines the amount of noise and spur passing through .
In achieving fast locking for the synthesizer, an internal adapt charge pump provides higher current atpin 45 of U201 to put synthesizer within the lock range. The required frequency is then locked bynormal mode charge pump at pin 43 .
Both the normal and adapt charge pumps get their supply from the capacitive voltage multiplier whichis made up of C258, C259, C228, triple diode CR201 and level shifters U210 and U211. Two 3.3Vsquare waves ( 180 deg out of phase) are first shifted to 5V, then along with regulated 5V , putthrough arrays of diodes and capacitors to build up 13.3V at pin 47 of U201.
Figure 5-4: Synthesizer Block Diagram
DATA
CLK
CEX
MODIN
VCC, DC5V
XTAL1
XTAL2
WARP
PREIN
VCP
REFERENCEOSCILLATOR
VOLTAGEMULTIPLIER
VOLTAGECONTROLLEDOSCILLATOR
2-POLELOOPFILTER
DATA (U409 PIN 100)
CLOCK (U409 PIN 1)
CSX (U409 PIN 2)
MOD IN (U404 PIN 40)
+5V (U247 PIN 4)
7
8
9
10
13, 30
23
24
25
32
47
VMULT2 VMULT1
BIAS1
SFOUT
AUX3
AUX4
IADAPTIOUT
GND
FREFOUT
LOCK 4
19
6, 22, 23, 24
4345
3
2
28
14 15
40
FILTERED 5V
STEERINGLINE
LOCK (U409 PIN 56)
PRESCALER IN
LO RF INJECTION
TX RF INJECTION(1ST STAGE OF PA)
FREF (U201 PIN 21 & U404 PIN 34)
39BIAS2
41
DUALTRANSIS
DUALTRANSIS-
48
5VR5
5, 20, 34, 36(U248 PIN 5)
AUX1
VDD, 3.3V MODOUT
U251LOW VOLTAGEFRACTIONAL-NSYNTHESIZER
TORS
TORS
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5B-11
6.2 VCO - Voltage Controlled Oscillator(Refer to UHF Voltage Controlled Oscillator Schematic Diagram on page 5B-24)
Figure 5-5: VCO Block Diagram
The VCOBIC (U241) in conjunction with the Fractional-N synthesizer (U201) generates RF in both thereceive and the transmit modes of operation. The TRB line (U241 pin 19) determines which oscillatorand buffer will be enabled. A sample of the RF signal from the enabled oscillator is routed from U241pin 12, through a low pass filter, to the prescaler input (U201 pin 32). After frequency comparison inthe synthesizer, a resultant CONTROL VOLTAGE is received at the VCO. This voltage is a DCvoltage between 3.5V and 9.5V when the PLL is locked on frequency.
Presc
RX
TX
MatchingNetwork
Low PassFilter
Attenuator
Pin8
Pin14
Pin10
Level ShifterNetwork
5V
(U201 Pin28)
VCC Buffers
TX RF Injection
U201 Pin 32
AUX4 (U201 Pin3)
AUX3 (U201 Pin2)
Prescaler Out
Pin 12Pin 19Pin 20
TX/RX/BSSwitching Network
U241VCOBIC
RxActive Bias
TxActive Bias
Pin2
Rx-I adjust
Pin1
Tx-I adjust
Pins 9,11,17Pin18
VsensCircuit
Pin15
Pin16
RX VCOCircuit
TX VCOCircuit
RX Tank
TX Tank
Pin7
Vcc-Superfilter
Collector/RF in
Pin4
Pin5
Pin6
RX
TX
(U201 Pin28)
Rx-SW
Tx-SW
Vcc-Logic
(U201 Pin28)
Steer LineVoltage(VCTRL)
Pin13
Pin3
TRB_IN
LO RF INJECTION
VSF
VSF
VSF
http:/
/www.m
yrad
io168
.net
5B-12 Frequency Generation Circuitry
The VCOBIC(U241) is operated at 4.54 V (VSF) and Fractional-N synthesizer (U201) at 3.3V. Thisdifference in operating voltage requires a level shifter consisting of Q260 and Q261 on the TRB line.
The operation logic is shown in Table 5-1.
In the receive mode, U241 pin 19 is low or grounded. This activates the receive VCO by enabling thereceive oscillator and the receive buffer of U241. The RF signal at U241 pin 8 is run through amatching network. The resulting RF signal is the LO RF INJECTION and it is applied to the mixer atT302 (refer to UHF Receiver Front End Schematic Diagram on page 5B-21).
During the transmit condition, when PTT is depressed, five volts is applied to U241 pin 19. Thisactivates the transmit VCO by enabling the transmit oscillator and the transmit buffer of U241. The RFsignal at U241 pin 10 is injected into the input of the PA module (U101 pin16). This RF signal is theTX RF INJECTION. Also in transmit mode, the audio signal to be frequency modulated onto thecarrier is received through the U201 pin 41.
When a high impedance is applied to U241 pin19, the VCO is operating in BATTERY SAVER mode.In this case, both the receive and transmit oscillators as well as the receive transmit and prescalerbuffer are turned off.
Table 5-1: Level Shifter Logic
DesiredMode AUX 4 AUX 3 TRB
Tx Low High(@3.2V)
High (@4.8V)
Rx High Low Low
Battery Saver Low Low Hi-Z/Float(@2.5V)
http:/
/www.m
yrad
io168
.net
Notes For All Schematics and Circuit Boards 5C-13
7.0 Notes For All Schematics and Circuit Boards* Component is frequency sensitive. Refer to the Electrical Parts List for value and usage.
1. Unless otherwise stated, resistances are in Ohms (k = 1000), and capacitances are in picofarads(pF) or microfarads (µF).
2. DC voltages are measured from point indicated to chassis ground using a Motorola DC multime-ter or equivalent. Transmitter measurements should be made with a 1.2 µH choke in series withthe voltage probe to prevent circuit loading.
3. Reference Designators are assigned in the following manner:
100 Series = Transmitter
200 Series = Frequency Generation
300 Series = Receiver
400/500 Series = Controller
600 Series = Keypad Board
4. Interconnect Tie Point Legend:
UNSWB+ = Unswitch Battery Voltage (7.5V)
SWB+ = Switch Battery Voltage (7.5V)
R5 = Receiver Five Volts
CLK = Clock
Vdda = Regulated 3.3 Volts (for analog)
Vddd = Regulated 3.3 Volts (for digital)
CSX = Chip Select Line (not for LVZIF)
SYN = Synthesizer
DACRX = Digital to Analog Voltage (For Receiver Front End Filter)
VSF = Voltage Super Filtered (5 volts)
VR = Voltage Regulator
6-LAYER CIRCUIT BOARD DETAIL VIEWINGCOPPER STEPS IN PROPER LAYER SEQUENCE
LAYER 1 (L1)
LAYER 2 (L2)LAYER 3 (L3)LAYER 4 (L4)
LAYER 5 (L5)LAYER 6 (L6)
INNER LAYERS
SIDE 1
SIDE 2
http:/
/www.m
yrad
io168
.net
5C-14 Notes For All Schematics and Circuit Boards
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
Circu 5B-15
8.0
R34
2
C10
1
C141
C102
C10
4
C10
3
C106
C107
CR
101
CR
102
L101
L102
L104
L105
SH100
C30
8
C51
1
C512
C51
4
C30
2
C301
C520
C30
3
C304
C30
5
CR301
CR302
L301
L302
PB
505
R301
R302
SH301
VR443
C362
C384
C385C36
4
51
C349C350
C352C353
C35
4
C363
CR
310
L325
L332
Q320
R355
R32
2
R34
5
R32
0
R321
R32
4
R34
6
SH321
C521
PB504
VR440
C50
5
C50
2
Q505
R506
R50
7
R505
VR501
C513
CR5032
3 4
Q502
R501
R50
2
C140L116
UHF (403-470MHz) Main Board Top SidePCB No. 8404077G05/G06/G07
.net
it Board/Schematic Diagrams and Parts List
Circuit Board/Schematic Diagrams and Parts List
40
J200
1
B50
3
3
FL201
TP201
C247C251
C28
5
C28
9
C37
0
C37
4C38
6
C248 C273
C28
6
C27
6
C253
C27
1
C27
2
L282
3
L243
1
L2733
L253
1
L271
L321
Q26
1 34
Q241
R33
3
R33
9
R24
3
R248
R25
3
R26
0
SH241
C21
0
C211
C21
2
C213
C21
4C220
C23
0
C257
C260
C29
4
C292
C22
9
C203
C21
7
C23
5
C22
8
C23
3
C238
C29
7
C29
1
CR
201
L201
L202
L203
L232
Q210
34
Q26
0 34
R256
R255
SH201
U247
B50
4
C522
FL3
01
PB502
R352
VR441
C325
C32
4
C32
3
L311
R35
1
SH323
C328
C55
4
C396
C39
1
C397
PB501
Q315
Q316
R32
6
R300
R314
R31
6
R318
R31
9
R325
R32
7
R33
4
R335
R338
RT
300
RT301
VR
300
VR
444
C33
1
C333
CR
308
R317
R336
TP202
TP302
C37
5
C32
0 C38
1
C31
9
C32
2
L309
L310
R30
9
R308
R310
R348
SH303
T30
1
3 46
T30
2
346
C11
0
C11
4
C11
8
C119
C121
C12
2
C12
5
C160
C16
5
C166
C171
C112
C11
3
C115
C117
C116
C12
0
C161
C127
C131C12
9
C16
9 L114
L115
L106
L107
L108
L109
L113
L160 R103
R10
4
R10
6
R10
7
R108
R12
0
R17
1
R16
1
R173
SH101
U101
9
8
16
1
C109
C111
3
2
Q110
1
C3
http:/
/www.m
yrad
io168
5B-16 Circuit Board/Schematic Diagrams and Parts List
B50
1
CR501
3
C133
C13
4L1
12
R109
C24
1
C246
C25
5
C28
1
C29
5
C372
C252
C24
2
C243
C250
C24
4
C245C254
C371
C373
C37
8
CR241
CR242
CR243
CR
251
L241
L281L242
L251
Q310
R330
R33
2
R11
0R
112
R11
1
R242R241
R25
1
R24
4
R24
5
R25
2
R25
4
R331
R349
SH242
U24
1
10
20
1
11
C20
1
C264
C21
8
C223
C224
C23
1
C29
6
C29
8
C20
2
C204
C20
6
C20
7
C208
C219
C232
C234 C25
8
C25
9
C263
C265
C29
3
CR203L261
R204
R281
R202
R201
R23
1R
232
R23
3
SH202
13
2537
1
U201U210
3
4
U21
13 4
C27
7
C27
9
C523
C27
8
L505
U24
8
VR442
VR
506
C525C526
C527C528
C529C530
C531C532
C533C534
C535C536
C537C538
C539C540
C541C542
C543
C544
C545
C546C547
C548
C549
C550
C551C552
C553
C555
R509
R510
R51
1
UHF (4PCB N
.net
2S502
3 5
4
1
2
S50
1
C8
C4
J101
4
3
2
J102
C10
8
C13
2
C17
3
C172
CR105
H10
1
P10
0
Q111
34
R10
1
R170
R13
3
R172
C315
C32
1
C39
5
C313
C310
C31
4
C318
C380C306
C31
1C316
C31
7
C31
2
CR
304
CR
305
CR
303
L340
L306
L307
L305L304
R30
6
R30
7
R34
7R
305
SH302
C309C30
7 L303
Q30
1R
304
R303
R34
0R
328
C383
C390
C346
C33
9
C34
0
C34
1
C34
2
C343
C357C358
R344
132537
1
U30
1
C33
7
C32
9
C34
7
C34
8
C35
6
L314
SH322
C33
6
C344
C360
C35
5
C361
C38
2
L331
R34
3
R350
C34
5
C33
4
C359
C32
7C
330
C32
6
C338
L330
Q30
2R
315
R31
3
R311
R312
32
1
C503
CR306
F50
1SH304
C10
5
C130
C138 C151
C170
C17
4
C12
C12
6
C128
C13
5
C150C152
E101
R10
2R
329
R130
R131 R132
25
9
17
U10
2
1
VR
439
03-470MHz) Main Board Bottom Sideo. 8404077G05/G06/G07
http:/
/www.m
yrad
io168
Circu 5B-17
ZMY0131016-O
42
C521
PB501VR440
362
C364
49 C350
C352C353
C354
C363
C384
C385
CR310
L325
L332
Q320
R322
R345
R320
21
R324
R355 R346
SH321
C505
C512 C513
C502
Q505
Q502
R506
R505
R507
VR501
C511
C514
C520
CR5032
3 4
R501
R502
VR443
C140L116
PB505
C308
C302
C304
C301
C303
C305
CR301
CR302
L301
L302
R301
R302
SH301
C102
C104
C103
C106
C107
C175
CR101
CR102
L101L102L104
SH100
C101
C141L105
UHF (403-470MHz) Main Board Top SidePCB No. 8404077G09
.net
it Board/Schematic Diagrams and Parts List
40
J200
1
B503
B504
FL201
1 3
46
SH201
TP201
C210
C211
C212
C213
C214
C220
C230
C257
C260
C292
C229
C203
C217
C235
C228
C233
C238
C297
C291
CR201
L201
L202
L203
L232
Q210
34
Q26034
R256R255
U247
C294
C247C251
C285
C289
C370
C374
C386
C271
C272
C248 C273
C286
C276
C253
L282
3
L243
1
L2733
L253
1
L271
L321
Q261
34
Q241
R333
R243
R248
R253
R260
R339
SH241
C391
C328
C397
C325
C522
C554
C324C323
FL301 R351
L311
PB502 PB504
Q316
Q315
R326
R334
R335R338
R300
R314
R316
R318
R319
R325
R327
R352
RT300
RT301
SH323
VR300
VR441
VR444
C375
C320
C319
C322
C381
L309
L310
R309
R308
R310
R348
SH303
T301
3 4
6T302
34
6
TP202
TP302 C331C333C396
CR308R336
R3
R317
C109C110
C114
C118
C119
C121
C122
C125
C160
C165
C166
C171
C111
C112
C113
C115C116
C117
C120
C161
C127
C131C129C169
L115
L106
L107
L108
L109
L114
L113
L160
3
2
Q110
1
R103
R104
R174
R106R107
R108
R120
R171
R161
R173
R175
R176
SH101
1
16
8
9
U101
C
C35
C3
R
http:/
/www.m
yrad
io168
1
3
5B-18 Circuit Board/Schematic Diagrams and Parts List
ZMY0131017-O
B501 C277
C279C278
L505
U248
VR506
CR501
133
C134
2
09
R136
C241
C246
C255
C281
C295
C371C372
C373C378
C242
C243C250
C244
C245 C252C254
CR241
CR242
CR243
CR251
R349
L241
L281L242
L251
Q310
R330R331
R332
R110
R112
R111
R242R241
R251
R244
R245
R252
R254
SH242
U241
10
201
11
C201
C264
C208
C265
C218
C223
C224
C231
C296
C298
C202
C204
C206
C207
C219
C232
C234
C258
C259
C263
C293 CR203L261
R204
R281R201R202
R231 R232
R233
SH202
13
2537
1
U201
U210 34
U211
3 4
C525 C526C527 C528C529 C530C531 C532C533 C534C535 C536C537 C538
C544C545C546 C547
C549
C550
C551 C552C553
C555
C539 C540C541 C542C543
C548
C523
R509
R511
R510
UHF (4PCB N
.net
2S502
3 5
4
4
C
8
CS501
2
C108
CR160
J101
4
3
2 1
J102
R101
R170
CR103
P100
Q111
34
C172
C132
C173
CR105
H101
R133
R172
R102
R130R131
C105
C309
C315
C321
C395
C306
C311
C307
C310C314
C318
C313
C380
C316
C312 C317
CR304
CR305
CR303 L340
L306 L307L303
L305L304Q301
R306
R307
R304
R303R347
R305
R340
R328
SH302
C337
C383C390
C329
C336
C344
C345
C346
C347 C348
C334
C356
C339
C340
C341
C342
C343
C357
C360
C355
C358
C359
C361
C382
L314
L331R343
R350R344
SH322
1325
37
1
U301 C327
C338
C330
C326
L330
Q302
R315
R313
R311
R312
1
2
3
C503
CR306
F501SH304
C130
C138C151
C170
C174
C123
C126
C
C128
C135
C150C152
E101
L11
R1
R132
R329
25
917
U102
1
VR439
03-470MHz) Main Board Bottom Sideo. 8404077G09
http:/
/www.m
yrad
io168
Circu 5B-19
B+
A
RX
OD
I
IF_SEL
MHz
K
DIN
SET
B503
B504
I_ION
MECH_SWB+
0.47uFC502
4
1
LOW
5
3
HIG
H
6TAB1
7TAB2
2
S502SWITCH
0R507
C522.01uF 6.8V
VR441
C505100pF
3B1 2B2 4
SWITCHPB502
A11A2
6.8VVR501
SB2
Vdda
VOL
F501
2124V
VR43912V
100pFC503
1
2
CR501
6.8VVR506
UNSWB+ BATT_CODERADIO_CODE
BATT-
BATT+
BATTERY_CONTACT
390nHL505
NEG1
POS3
B501
CONN_J
DATA2GND
PB504SWITCH
A11A23
B1 2B2 4
VR4406.8V
C521NU
PTT
RTA0
RTA1
RTA2
RTA3
C512100pF
C513100pF
C514100pF
C511100pF
PC3 8C0 C0
C1C1
7GND GND1
9
1 PC02 PC14 PC2
S501SWITCH
C523.01uF
C554.01uF
SB1
SB3
6.8VVR444
2B2 4
PB501SWITCH
A11A23
B1 EMERC520.01uF VR443
6.8V
Vdda
A11A23
B1 2B2 4
PB505SWITCH
Q502
R50647K
R501680
R50510K
CR503
51
6
IMX1
R502180
24
3 Q505RED_LED
1 3
SWB+
2 4
GREEN_LED
UHF Controls And Switches Schematic Diagram (sheet 1 of 2)
.net
it Board/Schematic Diagrams and Parts List
ZMY0130796-A
J200-35
J200-11
J200-16
J200-18
J200-27
J200-13
J200-20
J200-14
J200-4
J200-6
J200-8
J200-22
J200-3
J200-28
J200-26
J200-37J200-38
J200-33
J200-29
J200-1
J200-30
J200-10
J200-31
J200-24
J200-15
J200-25
J200-17
J200-36
J200-40J200-39
J200-21
J200-5
J200-7
J200-9
J200-12
J200-34
J200-23
J200-32
J200-2
J200-19
C528100pF 100pF100pF
C529C526100pF
C527C525100pF
C535100pF
C530100pF 100pF
C534100pF100pFC533C531
100pFC532 C538
100pF100pFC537C536
100pF
RSSICLK
LVZIF_SEL
BATT_CODE
SWB+
SWB+
Vdda
MODIN
LOCKRESETDACRX
16.8MHz
UNSWB+
SB1
DEMOD
SB3
DATA
RED_LEDGREEN_LEDMECH_SWB+RTA0RTA1RTA2RTA3
PTT
SB2
EMERVOL
CSX
5V
LI_ION
C555100pF
R509NU
R5100
NUR511
NUNUC543C541
NUC542C540
NUC539NU
C551100pF
C550100pF
C549100pF
C548NU
C547100pF
C546100pF
C545100pF
C544100pF 100pF100pF
C553C552
RX_IN
RECEIVER
R5 Vdda
Vdda
RSSI
16.8MHz
CLK
DACRx
DATA
DEMOD
LVZIF_SEL
RX_INJ
5V
SW
DA
CS
CLK
DA
DE
RS
LVZ
16.
LO
MO
R5 SWB+Vdda5V
RX_INJ
FGU
TX_INJ16.8MHz
CLK
CSX
DATA
LOCK
MODIN
RX_IN TX_INJ
UNSWB+
TRANSMITTER
5V
CLK
CSX
DATA
RESET
UNSWB+
RE
5V
L
http:/
/www.m
yrad
io168
T
X
C
M
S
8
C
5B-20 Circuit Board/Schematic Diagrams and Parts List
ZMY0130796-B
RADIO_CODE
BATT-
BATT+
Q502
BATTERY_CONTAC
J200-7
J200-9
100pFC514
J200-12
100pFC527C525
100pFC526
100pF
J200-32
J200-23
J200-2
VR5066.8V
C511100pF
Q505
100pFC533
100pFC532
100pFC531
J200-19
LOW
1
5
HIGH
3
TAB16
TAB27
2
6.8VVR440
SWITCHS502
4
J200-10
J200-15
J200-25
NUC521
J200-17
J200-36
J200-40J200-39
J200-21
J200-5
100pFC536
J200-3
J200-22
C534
J200-28
100pFC529
J200-34
100pF
IMX1
51
6
100pFC503
4B21A13A2
2B1
J200-33
PB502SWITCH
J200-29
100pFC530
J200-30
J200-1
R502180
SWITCHPB504
1A13A2
2B14B2
B503
6.8VVR443
B504
6.8V
24
3
VR501
2
CR5011
C554
100pF
.01uF
C513
J200-31
J200-24
100pFC505
J200-18
J200-16
RECEIVER
16.8MHz
CLK
DACRx
DATA
DEMOD
LVZIF_SEL
R5
RSSI
RX_IN RX_INJ
Vdda
7 9GND1
PC01PC12PC24 8PC3
SWITCHS501
C0C0C1C1
GND
J200-27
J200-13
J200-20
J200-14
J200-4
J200-6
J200-11
J200-8
.01uFC523
J200-37
J200-26
2 4
1 3
J200-38
CR503
F50124V
21
VR4416.8V
TRANSMITTER
5V
CLK
CSX
DATA
RESETRX_IN TX_INJ
UNSWB+
680R501
10KR505
1A13A2
2B14B2
L505390nH
SWITCHPB501
CONN_J
B5012DATA1NEG3POS
100pFC547
100pFC546
100pFC545
100pFC544
NUC543
100pFC528 12V
VR439
NUC542C540
NUC541C539
NUNU
0.47uF100pFC538
C502
100pFC512
.01uFC520
100pFC537
NU
R511
2B14B2
C522.01uF
SWITCHPB505
1A13A2
0
16.8MHz
5V
CLK
CSX
DATA
LOCK
MODIN
R5
RX_INJ
SWB+
TX_INJ
Vdda
R507
6.8V
FGU
100pFC535
VR444
47KR506
0R510
100pF
NU
R509
C555
J200-35
100pFC553
100pFC552
100pFC551C549
100pFC550C548
100pF
16.8MHz
UNSWB+
SB2
SB3
SB1
PTT
NU
5V
LI_ION
RSSICLK
LVZIF_SEL
BATT_CODE
SWB+
SWB+
Vdda
MODIN
LOCKRESETDACRX
UNSWB+
SB1
DEMOD
SB3
DATA
RED_LEDGREEN_LEDMECH_SWB+RTA0RTA1RTA2RTA3
PTT
SB2
EMERVOL
CSX
Vdda
SWB+
UNSWB+
RESET
DATA
CSX
CLK
5V
GND
RTA0
RTA1
RTA2
RTA3
VOL
MECH_SWB+
EMER
LI_IONBATT_CODE
Vdda
Vdda
DACRX
DEMOD
RSSI
LVZIF_SEL
16.8MHz
LOCK
MODIN
5V
GREEN_LED
SWB+
RED_LED
UHF Controls And Switches Schematic Diagram(sheet 2 of 2 for 8404077G09 PCB)
http:/
/www.m
yrad
io168
.net
Circu 5B-21
100pFC386
Q3101
3
2NU
R331 C372R330 C371NU NU NU NU
2 1
R335
RT301
R338
C3916.8KR325
R5
NU
NUNU
NU
97uF
.2K300
RSSI
RX_INJ
100pFC370
0R339
R332NU
100pFC374R333
0R349
L321
C373
NU NU
NUC378NU
100pFC375
16.28nHL309
C320 C3197.5pF 1.8pF
2T302XFMR
46
31
C3819.1pF
TP3023.6KR348
R5
7.5pFC318
9.1pFC317
R3290
CR305
00K307
3073.9nH
2
XFMRT301
4
6
3
1
18R309
270270R310R308
CR30634
IF
2 1
82pFC322
L310150nH
UHF Receiver Front End Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
VR300
R326
Q316
13
2
R334
NU
NUNU
NU
33.0KRT300
2
1
13
2
Q315
R319150
R31818K
R32733K
C333
R336
R5
NU
NU
R31691K
C396NU
C31
2R
CR304
1RR306
100K
L30613.9nH
L1
C3163.9pF
C31310pF
C311
27nHL305 6.8pF
C312
C306
NU
NU
R3031K
C3100.1uF
Q301
13
2
R3406.8K
2.7R328
C3140.1uF510
12K
R305
C309100pF
R304
180nHL304
100pFC321
100pFC315
R5R342100K
C380.01uF
DACRx
R3171K
23
CR308HSMP3820
1
100pFC331C395
100pF
L340390nH
R3471K
R5
C3013.6pF
RX_INCR301
13.9nHL301C302
10pF
CR302
R302100K
R301100K
3.9pFC303
100pFC308
C30520pF
L30213.9nH
C3049.1pF
CR303
2
3
1 220nHL303
C3070.1uF
SHIELDSH301
1
RXFE Top Shield
SH302
1
SHIELD
1
SH304SHIELD
RXFE Bottom Shield
RX Mixer Diod Shield
SH303SHIELD
1
Mixer Shield
http:/
/www.m
yrad
io168
5B-22 Circuit Board/Schematic Diagrams and Parts List
DEMOD
100KR350
C390100pF
100pFC383
dd_FILTERED
C349.022uF
C350330pF
C35120pF
Hz
BFQ67WQ320
3
212pFC352
1
C35343pF
0R355
R3203.9K
2.2uHL325
R34656K
47pFC354
2KR324
CR310
C38556pF 100nH
L332
1KR321 R322
200K8200pFC364C362
0.1uF
C3631uF
C38456pF10K
R345
IF
UHF R
.net
Vdd_FILTERED
(SOURCE)
L3312.2uH
R34310
10uFC382
C3290.1uF
0.1uFC348
0.1uFC344
Vdda
C3430.22uF
0.1uFC347 C346
0.1uF 0.1uFC345
R34412K
V
.022uFC334
16.8M
CLKDATA
LVZIF_SEL
0.22uFC357
1200pFC358
C3590.1uF
VA
G
VA
G_R
EF
RO
SE
_VC
CR
OS
E_V
SS
LIM
PH
AS
E_L
OC
KD
EM
OD
_OU
T
C4M
DE
MO
D_H
F
C1M
C2M
C3M
TESTAIOUT
MLPD_CR
FREFGND
GOLD_VSS
CEXCLK
COL
DATA
BROWN_VCCBRP_OFF
PRE_AGC
GREEN_VSSMIX_BYP
MIX_INPREAMP_OUT
GREEN_VCC
C3PC4P
BLUE_VSS
C1PC2P
BLUE_VCC
TE
ST
DV
PP
PR
E_I
N
RE
D_V
CC
RE
D_V
SS
RS
SI_
FLT
RS
SI_
OU
T
EM
IT
EX
TB
S
GO
LD_V
CC
AF
C
BA
SE
U30132D83
8 931 2 54 116 107 12
1615
24
2120
14
1918
13
17
2223
48
4342
4647
41
3837
44
4039
45
32 2530 2931 262736 28333435
0.15uF
15pFC338
C361.01uF
RSSI
C3280.1uF
R3143K
R5
330R313
C355
C337100pF
.022uFC356
C326.01uF
L3142.2uH
C3360.1uF
Vdd_FILTERED
C3421uF
C3411uF
C3401uF
1uFC339
LVZIF BTM SHEILDCRYSTAL FILTER SHIELD LVZIF TOP SHEILD
SH322SHIELD
SH321SHIELD
SH323SHIELD
111
C360.022uF
680nHL330
C33010pF
C327100pF
2.4KR312 Q302R351
0
R31512K
.01uFC325
30KR311
3.3KR352
XTALFL301
TBD
OUTIN
GN
DG
ND
1G
ND
2G
ND
3
36
1 2 4 5
C323150pF
L311750nH
20pFC324
eceiver Back End Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5B-23
SWB+
LP2980U248
ON
_OF
F*
VIN
GND
VO
UT
NC
3 1
5
2
4
C277100pF 2.2uF
C278
4V_3.3V
C2330.1uF
C2792.2uF
.047uFC232
C2340.47uF
R231120
25630
0.1uFC231
620R232
R233560
12uHL232
VCTRL
470pFC238
1TP202
UHF Synthesizer Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
GND3
2
NC
1 4
U210TC7SET04FU
VCC5
GND3
2
NC
1 4
VCC5
U211TC7SET04FUC296
0.1uF
C265NU 100pF
C257
A2A3
K1K2K3
A1
CR201
54
6123
C258.01uF
.01uFC259
C230100pF 1000pF
C2294.7uFC228
C2190.22uF
0.1uFC292
C2980.1uF
L2022.2uH
(SOURCE)5V
0.47uFC291
0.1uFC223
2.2uFC235
246
53
1
U247ADP3300
GN
D
INSD
NROUTERR
C2930.47uF100pF
C294
L2032.2uH
Vdda
R2554.3K
R
R5
1
3
Q210
2
4
5V
100pFC260
AUX3AUX4
LOCK
C213100pF
TP2011
XTAL1XTAL2
VMULT1VMULT2VMULT3VMULT4
MODOUTFREFOUT
AUX4
AUX1AUX2AUX3
2324
15141211
1941
48123
TEST2
WARP
SFOUT
TEST1
IADAPT
INDMULT
IOUT
LOCKADAPTSW
25
28
3738
45
16
43
446
VC
PV
RO
PR
E_V
DD
PD
_VD
D
DV
DD
AV
DD
47135 34 3620
VBPASSPVREF
SFIN
MODIN
BIAS1BIAS2
CEXCLK
DATA
2135
30
10
4039
98
7
REFSEL
SFBASESFCAP
NC1NC2NC3
PREIN
CCOMP
18
2726
172931
32
42
PD
_GN
DP
RE
_GN
D
DG
ND
AG
ND
44336 22
U20163A27
C204
100KR202
82KR201
100pFC211
C214100pF
DATAMODIN
2.2uF
100pFC264
39nHL261
C2630.75pF
PRESC
100pFC210
C212100pF
CSXCLK
VSF
1000pFC202C201
100pF 4.7uFC203
SH201SHIELD
1
SYNTHESIZER TOP SHIELD
SH202SHIELD
1
SYNTHESIZER BOTTOM SHIELD
R20447K
CR203
45J49FL201
GND3
IN1
OUT2
C2081.6pF
C20756pF
C206330pFNU
R281
0.1uFC224
2.2uFC217 C218
0.1uF 100pFC220
2.2uHL201
16.8MHz
http:/
/www.m
yrad
io168
5B-24 Circuit Board/Schematic Diagrams and Parts List
CR251
10pFC252
0.1uFC248
100pFC251
L25133nH
CR242
L241
CR243
390nHVCTRL
100pFC241
2
CR241
1
3F
C2442pF
Rx_sw
1
7.5pFC242
7.5pFC243
C2507.5pF
220nHL242
TOR
3
TX
RX
UHF V
.net
33nHL273
390nHL281
100pFC281
240R245
2.2uFC276
NUC272
0.1uFC273
C2860.1uF
L27168nH
Rx_swTx_sw
PRESC
NUC271
TX_SWITCH
VC
C_B
UF
FE
RS
VC
C_L
OG
IC
RX_OUT
RX_SWITCH
SUPER_FLTR
TRB_IN
TX_BASE
TX_EMITTER
TX_IADJTX_OUT
FLIP_IN
GN
D_B
UF
FE
RS
GN
D_F
LAG
GN
D_L
OG
IC
PRESC_OUT
RX_BASE
RX_EMITTER
RX_IADJ
COLL_RFINU24150U54
11 917
10
13
8
7
12
23
19
1615
1
4
20
56
1418
1
SHIELDSH242
1
SH241SHIELD
VCO TOP SHIELD VCO BOTTOM SHIELD
R2601K
C297.01uF
4
1
3
Q260
2AUX3
5V
AUX4
1
3
Q261
2
100pFC289
330R252 R251
18
100pFC255
R2547.5K
1
2
3
3.6pF
L253RESONATOR
C254
P1
P2
P3
C2531.5pF
C247100pF
30R248
7.5KR253
Tx_sw
L282390nH
1
3
2Q241BFQ67W
VS
R24412K
R24310K
2.4pFC245
100pFC246
R24118
R242200
L243RESONA
2
VSF
C285100pF
_INJ
_INJ
4
oltage Controlled Oscillator Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5B-25
VAR1
VAR2
VAR3
VG
VL VLIM
RS
RS
ET
RXT1
TE
MP
V10
V45
V5EXT
F16
8GND1
GN
D2
INTNA
QQX
RFIN CE
X
CI
CJ
CL
CLK
CQ
CQ
XD
AT
A
AN
O
BP
OS
U102H99S
20
18
24
19
21
23
17
22
31 30 2529 262832 27
6
2
8
4
1
3
5
7
1514 169 1110 12 13
C173.022uF
10KR131
GND3
1
PO
S
2VOUT
LM50CR105
10KR130
0.1uFC126
C170100pF
5V
100pFC110
RESET
C132100pF
C105100pF
6
4
1
3
Q111
2
UNSWB+
100pFC174
100pFC122
R133
CLK
DATA
UNSWB+
CSX
NU
.022uFC131
L114390nH
F9
R132470K
00pF165
C166100pF
UNSWB+
C1343300pF .022uF
C135
C138100pF
pF3
51213
4
RF
OU
T1
RF
OU
T2
VC
NT
RL
VD
1V
G1
VG
2
GND2GND3GND4
NC
1N
C2
NC
3N
C4
RF
IN
G2
GND1
U10109Z67
1 14 8 9 10 1516 11
6 7 2 3
.022uFC128
390nHL112
100pFC130
UNSWB+
.022uFC152
R108NU
UHF Transmitter Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
7.5pC12
5.6nHL113
1C
3.9pFC169
1000C13
R109200K
L115390nH
C1610.1uF
200R161
C1271000pF
100pFC160
10pFC120
C121100pF
15.0nHL160
R107C151100pF C150
.022uFNU
300R110
2KR104
R11120
300R112 C125
100pF
C295100pF
TX_INJ
4.22nHL108
11.03nHL109
C118100pF
30pFC117
10R106
C11633pF15pF
C115
2
Q110
R10343
R1756.2
R1766.2
0.1uFC172
R172200
Microstrip
C113
L106
10pF
7.66nH
19.61nHL104
C11113pF
1
3C11247pF
RX_IN
MicrostripMicrostrip
C108100pF
CR101
C109100pF
L105390nH
UNSWB+
C1046.2pF
19.61nHL101
C10310pF6.2pF
C102
19.61nHL102
100pFC101
4GND
1
2
3
J101RF_JACK
C1419.75nHL116
NU
TAB11
TAB22
TAB33
TAB44
TAB55
ANTENNA_NUTJ102
POS1
HEATSINKH101 C140
NU
P100
BEADE101
C123
0.1
10uF
R102
100pFC114
33.47nHL107
3.3pFC107C106
4.7pF
CR1021
1
2
2
3
R171C171100pF
R1731MEG
100pFC119 0
R120
1
SHIELDSH100
HF SHIELD
1
SH101SHIELD
PA SHIELD
NU
R101240
R170240
20pFC175
http:/
/www.m
yrad
io168
5B-26 Circuit Board/Schematic Diagrams and Parts List
UHF BBoard
CircuiRef
B501B503
B504
C101C102C103C104C105C106C107C108C109C110C111C112C113C114C115C116C117C118C119C120C121C122C123C125C126C127C128C129C130C131C132C133C134C135C138C140C141C150C151C152C160C161
, 10%, 10%
, 5%0.25 pF
, 5%
F, +80% / -20%
, 5%0%
, 5%, 5%F, +80% / -20%
, 5%20%F, +80% / -20%
, 10%, 5%, 5%F, +80% / -20%, 10%F, +80% / -20%.25 pF
5%.1 pF
5%5%
F, +80% / -20%, 5%, 5%F, +80% / -20%
.5 pF5%F, +80% / -20%
, 5%.1 pF.5 pF.5 pF.25 pF.5 pF
, 5%5%, 5%5%, 10%, 10%
escription
C327 2113743N50 100.0 pF, 5%C328 2113743M24 100000 pF, +80% / -20%C329 2113743M24 100000 pF, +80% / -20%C330 2113743N26 10.0 pF, 5%C331 2113743N50 100.0 pF, 5%C333 NOT PLACEDC334 2113743M08 22000 pF, +80% / -20%C336 2113743M24 100000 pF, +80% / -20%C337 2113743N50 100.0 pF, 5%C338 2113743N30 15.0 pF, 5%C339 2180478Z20 1.0 uFC340 2180478Z20 1.0 uFC341 2180478Z20 1.0 uFC342 2180478Z20 1.0 uFC343 2113743A23 0.220 uF, 10%C344 2113743M24 100000 pF, +80% / -20%C345 2113743M24 100000 pF, +80% / -20%C346 2113743M24 100000 pF, +80% / -20%C347 2113743M24 100000 pF, +80% / -20%C348 2113743M24 100000 pF, +80% / -20%C349 2113743E07 0.022 uFC350 2113743L05 330 pF, 10%C351 2113743N33 20.0 pF, 5%C352 2113743N28 12.0 pF, 5%C353 2113743N41 43.0 pF, 5%C354 2113743N42 47.0 pF, 5%C355 2113743A24 0.330 uF, 10%C356 2113743M08 22000 pF, +80% / -20%C357 2113743A23 0.220 uF, 10%C358 2113741A23 1200 pF, 5%C359 2109720D14 0.1 uFC360 2113743E07 0.022 uFC361 2113741F49 10000C362 2113743M08 22000 pF, +80% / -20%C363 2311049A40 2.2 uF, 10%C364 2113743L41 10000 pF, 10%C370 2113743N50 100.0 pF, 5%C371 NOT PLACEDC372 NOT PLACEDC373 NOT PLACEDC374 2113743N50 100.0 pF, 5%C375 2113743N50 100.0 pF, 5%C378 NOT PLACEDC380 2113743L41 10000 pF, 10%C381 2113743N21 6.2 pF, 0.5 pFC382 2311049A59 10 uF, 10%C383 2113743N50 100.0 pF, 5%C384 2113743N44 56.0 pF, 5%C385 2113743N44 56.0 pF, 5%C386 2113743N50 100.0 pF, 5%C390 2113743N50 100.0 pF, 5%
CircuitRef
MotorolaPart No. Description
.net
and 1 Radio Parts List (RF)
t MotorolaPart No. Description
0986237A02 Battery Contact Connector3980502Z01 Contact, Backup B+
(not used in GP328 Plus)3980501Z01 Contact, Backup B-
(not used in GP338 Plus)2113740F51 1002113740F22 6.22113740F27 10.02113740F22 6.22113743N50 100.0 pF, 5%2113740F19 4.7 pF2113740F15 3.32113743N50 100.0 pF, 5%2113740F51 1002113743N50 100.0 pF, 5%2113740F31 15 pF2180605Z32 47 pF2180605Z16 10 pF2113743N50 100.0 pF, 5%2113743N35 24 pF, 5%2113743N35 24 pF, 5%2113743N34 22.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N27 11.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2311049A18 10 uF, 10%2113743N50 100.0 pF, 5%2113743M24 100000 pF, +80% / -20%2113743L17 1000 pF, 10%2113743M08 22000 pF, +80% / -20%2113743N23 7.5 pF, 0.5 pF2113743N50 100.0 pF, 5%2113743M08 22000 pF, +80% / -20%2113743N50 100.0 pF, 5%2113743L17 1000 pF, 10%2113743L29 3300 pF, 10%2113743M08 22000 pF, +80% / -20%2113743N50 100.0 pF, 5%0662057A67 5600, 5%NOT PLACED2113743M08 22000 pF, +80% / -20%2113743N50 100.0 pF, 5%2113743M08 22000 pF, +80% / -20%2113743N50 100.0 pF, 5%2113743M24 100000 pF, +80% / -20%
C165 2113743N50 100.0 pF, 5%C166 2113743N50 100.0 pF, 5%C169 2113743N20 5.6 pF, 0.5 pFC170 2113743N50 100.0 pF, 5%C171 2113743N50 100.0 pF, 5%C172 2113740F51 100C173 2113743M08 22000 pF, +80% / -20%C174 2113743N50 100.0 pF, 5%C175 2113740F51 100C201 2113743N50 100.0 pF, 5%C202 2113743L17 1000 pF, 10%C203 2311049A56 4.7 uFC204 2104993J02 2.2 uFC206 2113740F63 330 , 5%C207 2113743N40 39.0 pF, 5%C208 NOT PLACEDC210 2113743N50 100.0 pF, 5%C211 2113743N50 100.0 pF, 5%C212 2113743N50 100.0 pF, 5%C213 2113743N50 100.0 pF, 5%C214 2113743N50 100.0 pF, 5%C217 2104993J02 2.2 uFC218 2113743M24 100000 pF, +80% / -20%C219 2113743K16 0.220 uF, +80% / -20%C220 2113743N50 100.0 pF, 5%C223 2113743M24 100000 pF, +80% / -20%C224 2113743M24 100000 pF, +80% / -20%C228 2311049J11 4.7 uF, 10%C229 2113743L17 1000 pF, 10%C230 2113743N50 100.0 pF, 5%C231 2113743M24 100000 pF, +80% / -20%C232 2113743E12 0.047 uF, 10%C233 2311049A01 0.1C234 2311049A05 0.47 uF, 10%C235 2104993J02 2.2 uFC238 2113741F17 470C241 2113743N50 100.0 pF, 5%C242 2113743N23 7.5 pF, 0.5 pFC243 2113743N23 7.5 pF, 0.5 pFC244 2113740F10 2.0C245 2113743N11 2.4 pF, 0.25 pFC246 2113743N50 100.0 pF, 5%C247 2113743N50 100.0 pF, 5%C248 2113743M24 100000 pF, +80% / -20%C250 2113743N23 7.5 pF, 0.5 pFC251 2113743N50 100.0 pF, 5%C252 2113743N26 10.0 pF, 5%C253 2113740F09 1.8C254 2113743N15 3.6 pF, 0.25 pFC255 2113743N50 100.0 pF, 5%C257 2113743N50 100.0 pF, 5%
CircuitRef
MotorolaPart No. Description
C258 2113743L41 10000 pFC259 2113743L41 10000 pFC260 2113743N50 100.0 pFC263 2113743N02 0.75 pF,C264 2113743N50 100.0 pFC265 NOT PLACEDC271 NOT PLACEDC272 NOT PLACEDC273 2113743M24 100000 pC276 2104993J02 2.2 uFC277 2113743N50 100.0 pFC278 2311049A09 2.2 uF, 1C279 2104993J02 2.2 uFC281 2113743N50 100.0 pFC285 2113743N50 100.0 pFC286 2113743M24 100000 pC289 2113743N50 100.0 pFC291 2311049A69 10.0 uF,C292 2113743M24 100000 pC293 2113743A27 0.470 uFC294 2113743N50 100.0 pFC295 2113743N50 100.0 pFC296 2113743M24 100000 pC297 2113743L41 10000 pFC298 2113743M24 100000 pC301 2113743N15 3.6 pF, 0C302 2113743N26 10.0 pF,C303 2113740L08 3.9 pF, 0C304 2113743N26 10.0 pF,C305 2113743N33 20.0 pF,C306 NOT PLACEDC307 2113743M24 100000 pC308 2113743N50 100.0 pFC309 2113743N50 100.0 pFC310 2113743M24 100000 pC311 NOT PLACEDC312 2113743N25 9.1 pF, 0C313 2113743N26 10.0 pF,C314 2113743M24 100000 pC315 2113743N50 100.0 pFC316 2113740L08 3.9 pF, 0C317 2113743N25 9.1 pF, 0C318 2113743N23 7.5 pF, 0C319 2113743N69 1.8 pF, 0C320 2113743N23 7.5 pF, 0C321 2113743N50 100.0 pFC322 2113743N48 82.0 pF,C323 2113743N54 150.0 pFC324 2113743N33 20.0 pF,C325 2113743L41 10000 pFC326 2113743L41 10000 pF
CircuitRef
MotorolaPart No. D
http:/
/www.m
yrad
io168
Circu 5B-27
C391C395C396C397C502C503C505C511C512C513C514C520C521C522C523C525C526C527C528C529C530C531C532C533C534C535C536C537C538C539C540C541C542C543C544C545C546C547C548C549C550C551C552C553C554C555CR1CR1CR1CR1CR1
CircR
H, 10%HH, 5%H, 5%, 5%HHnH
H, 5%H, 5%nH, 5%
HH, 5%H
H, 5%H, 10%H, 10%d Contactouch Switchouch Switchouch Switchouch Switch
istor 8W 450MHzistor Dual NPN / PNPistor Dual NPN / PNPansistor BFQ67Wistor Dual NPN / PNPistor Dual NPN / PNP
ilicon Bipolar Transistorilicon Bipolar Transistor
istor MMBT3904
ansistor BFQ67Wransistor NPN
istor MMBT3904%
r Metal Strip Resistor
%
5%5%%
%%%
Description
R131 0662057N05 18 k, 5%R132 0662057N33 270 k, 5%R133 NOT PLACEDR136 NOT PLACEDR161 0662057M57 200, 5%R170 0662057A34 240, 5%R171 0662057N14 43 k, 5%R172 0662057A32 200, 5%R173 0662057N29 180 k, 5%R174 0662057N15 47 k, 5%R175 0662057B59 3.0, 5%R176 0662057B59 3.0, 5%R201 0662057N21 82 k, 5%R202 0662057N23 100 k, 5%R204 0662057N15 47 k, 5%R231 0662057M52 120, 5%R232 0662057M69 620, 5%R233 0662057M68 560, 5%R241 0662057M32 18, 5%R242 0662057M57 200, 5%R243 0662057M98 10 k, 5%R244 0662057N01 12 k, 5%R245 0662057M59 240, 5%R248 0662057M37 30, 5%R251 0662057M32 18, 5%R252 0662057M62 330, 5%R253 0662057M95 7500, 5%R254 0662057M95 7500, 5%R255 0662057M89 4300, 5%R256 0662057M37 30, 5%R260 0662057M74 1000, 5%R281 NOT PLACEDR300 0662057M82 2200, 5%R301 0662057N23 100 k, 5%R302 0662057N23 100 k, 5%R303 0662057M74 1000, 5%R304 0662057N01 12 k, 5%R305 0662057M67 510, 5%R306 0662057N23 100 k, 5%R307 0662057N23 100 k, 5%R308 0662057M60 270, 5%R309 0662057M32 18, 5%R310 0662057M60 270, 5%R311 0662057N10 30 k, 5%R312 0662057M83 2400, 5%R313 0662057M62 330, 5%R314 0662057M85 3000, 5%R315 0662057N01 12 k, 5%R316 0662057A96 91 k, 5%R317 0662057M74 1000, 5%R318 0662057A79 18 k, 5%
CircuitRef
MotorolaPart No. Description
.net
it Board/Schematic Diagrams and Parts List
NOT PLACED2113743N50 100.0 pF, 5%NOT PLACED2311049A05 0.47 uF, 10%2311049A05 0.47 uF, 10%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743L41 10000 pF, 10%NOT PLACED2113743L41 10000 pF, 10%2113743L41 10000 pF, 10%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%NOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%NOT PLACED2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743N50 100.0 pF, 5%2113743L41 10000 pF, 10%2113743N50 100.0 pF, 5%
01 4880973Z02 PIN Diode02 4802245J41 PIN Diode03 4802245J41 PIN Diode05 5185963A15 Temperature Sensor60 NOT PLACED
uitef
MotorolaPart No. Description
CR201 4802233J09 Triple DiodeCR203 4862824C03 Varactor DiodeCR241 4805649Q13 Varactor DiodeCR242 4862824C01 Varactor DiodeCR243 4862824C01 Varactor DiodeCR251 4802245J22 Varactor DiodeCR301 4862824C01 Varactor DiodeCR302 4862824C01 Varactor DiodeCR303 4880154K03 Dual DiodeCR304 4862824C01 Varactor DiodeCR305 4862824C01 Varactor DiodeCR306 4802245J42 Ring Quad DiodeCR308 4802245J41 PIN DiodeCR310 4862824C01 Varactor DiodeCR501 4880107R01 RectifierCR503 4805729G49 Red / Yellow DiodeE101 2484657R01 Inductor Bead ChipF501 6580542Z01 Fuse 3AFL201 4805875Z04 Crystal 16.8 MHzFL301 9186153B01 X’tal FilterH101 2680499Z01 Heat SpreaderJ101 0985613Z01 RF JackJ102 0280519Z02 Antenna NutJ200 0905505Y04 Conn ZIF HorizontalL101 2479990B02 19.61 nHL102 2479990B02 19.61 nHL104 2479990B02 19.61 nHL105 2462587N22 390 nH, 10%L106 2479990A02 7.66 nHL107 2479990G01 33.47 nHL108 2479990A01 4.22 nHL109 2479990B01 11.03 nHL112 2462587N45 22 nH, 5%L113 2413926H09 5.6 nH, 0.3 nHL114 2462587N45 22 nH, 5%L115 2462587N22 390 nH, 10%L116 2479990A03 9.75 nHL160 2413926H14 15.0 nH, 5%L201 2462587Q20 2200 nH, 20%L202 2462587Q20 2200 nH, 20%L203 2462587Q20 2200 nH, 20%L232 2462587P25 12000 nH, 5%L241 2462587V41 390 nH, 10%L242 2462587V38 220 nH, 5%L243 2460593C01 Teflon ResonatorL251 2462587V28 33 nH, 5%L253 2460593C02 Teflon ResonatorL261 2462587V29 39 nH, 5%L271 2462587V32 68 nH, 5%L273 2462587V28 33 nH, 5%L281 2462587V41 390 nH, 10%
CircuitRef
MotorolaPart No. Description
L282 2462587V41 390 nL301 2479990C01 13.9 nL302 2479990C01 13.9 nL303 2462587V26 22 nHL304 2462587V37 180 nL305 2462587V26 22 nHL306 2479990C01 13.9 nL307 2479990C01 13.9 nL309 2479990C02 16.28L310 2462587V36 150 nL311 2462587N65 750 nL314 2462587N72 2200L321 NOT PLACEDL325 2480646Z20 2.20 uL330 2462587N64 680 nL331 2480646Z20 2.20 uL332 2462587N53 100 nL340 2462587V41 390 nL505 2462587Q42 390 nP100 3905643V01 GrounPB501 4070354A01 Light TPB502 4070354A01 Light TPB504 4070354A01 Light TPB505 4070354A01 Light TQ110 4813828A09 TransQ111 4809939C05 TransQ210 4809939C05 TransQ241 4805218N63 RF TrQ260 4809939C05 TransQ261 4809939C05 TransQ301 4802245J44 NPN SQ302 4802245J44 NPN SQ310 NOT PLACEDQ315 4880214G02 TransQ316 NOT PLACEDQ320 4805218N63 RF TrQ502 5180159R01 Dual TQ505 4880214G02 TransR101 0662057A34 240, 5R102 0680539Z01 PoweR103 0662057M41 43, 5%R104 0662057N15 47 k, 5R106 0662057M26 10, 5%R107 NOT PLACEDR108 0662057M92 5600,R109 0662057N30 200 k,R110 0662057M61 300, 5R111 0662057M33 20, 5%R112 0662057M61 300, 5R120 0662057N14 43 k, 5R130 0662057M98 10 k, 5
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
5B-28 Circuit Board/Schematic Diagrams and Parts List
R319R320R321R322R324R325R326R327R328R329R330R331R332R333R334R335R336R338R339R340R342R343R344R345R346R347R348R349R350R351R352R355R501R502R505R506R507R509
R510R511RT300RT301S501S502SH100SH101SH201SH202SH241SH242
CircuiRef
.net
* Motorola Depot Servicing only
0662057A29 150, 5%0662057M74 1000, 5%0662057M83 2400, 5%0662057N30 200 k, 5%0662057M81 2000, 5%0662057M94 6800, 5%NOT PLACED0662057N11 33 k, 5%0662057M12 2.7, 5%0662057M01 0, 5%NOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED0662057M01 0, 5%0662057M94 6800, 5%0662057N23 100 k, 5%0662057M26 10, 5%0662057N01 12 k, 5%0662057M98 10 k, 5%0662057N17 56 k, 5%0662057M74 1000, 5%0662057M87 3600, 5%0662057C01 00662057N23 100 k, 5%0662057C01 00662057M86 3300, 5%0662057M01 0, 5%0662057M70 680, 5%0662057M56 180, 5%0662057M98 10 k, 5%0662057N15 47 k, 5%0662057M01 0, 5%0662057M01 0, 5%
(not used in GP328 Plus)0662057M01 0, 5%NOT PLACED0680590Z01 Thermistor 33kNOT PLACED4080710Z01 Channel Switch1880619Z02 Potentiometer (Volume)2680507Z01 Shield, Harmonic Filter2680510Z01 Shield, PA2680511Z01 Shield, Synthesizer2680511Z01 Shield, Synthesizer2604120G01 Shield, VCO2680514Z01 Shield, VCO Bottom / LVZIF
t MotorolaPart No. Description
SH301 2680554Z01 Shield, Receiver Front EndTop
SH302 2680555Z01 Shield, Receiver Front EndBottom
SH303 2680509Z01 Shield, MixerSH304 2680624Z01 Shield, Mixer DiodeSH321 2680508Z01 Shield, LVZIF 2nd LOSH322 2680514Z01 Shield, VCO Bottom / LVZIFSH323 2604082P01 Shield, X’tal FilterT301 2580541Z02 Balun TransformerT302 2580541Z02 Balun TransformerTP201 NOT PLACEDTP202 NOT PLACEDTP302 NOT PLACEDU101 5185130C65 LDMOS DriverU102 5185765B26 PCICU201 5185963A27 LVFRACNU210 5102463J61 InverterU211 5102463J61 InverterU241 5105750U54 VCO BufferU247 5105739X05 5V RegulatorU248 5102463J58 3.3V RegulatorU301 5109632D83 LVZIFVR300 NOT PLACEDVR439 4880140L17 12V Zener DiodeVR440 4802245J73 6.8V Zener DiodeVR441 4802245J73 6.8V Zener DiodeVR443 4802245J73 6.8V Zener DiodeVR444 4802245J73 6.8V Zener DiodeVR501 4813830A18 6.8V DiodeVR506 4802245J73 6.8V Zener Diode
8404077G05 RF PCB8404077G06 RF PCB8404077G07 RF PCB8404077G09 RF PCB
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
Troubleshooting charts 5B-29
9.0 Troubleshooting charts
MCU Check
Power UpAlert Tone
OK?
SpeakerOK?
U409 EXTAL=7.3728 MHz?
U201 Pin 1916.8 MHz
5V at U247?3.3V at U248?
U409 Reset Pin94 High?
MCU is OK
Not able to pro-gram RF Board
ICs
Before replacingMCU, check SPI
clock, SPI data, andRF IC select
Replace Speaker
Read Radio OK?CheckSetup
Reprogram thecorrect data.
See FGUTroubleshooting
7.5V atPin 3/5 U247? 4/
3.3V at Pin 1U248
CheckQ400
Replace U247/U248
Check any short toSWB+,
Vdda or Vddd
Press PTT. RedLED does not
light up
PTT U409 Pin53
low?
Press PTTQ502-2 High?
CheckPB504
CheckQ502-2voltage
LEDQ502,R501
OK?
ReplaceFaulty
Component
CheckAccessories
J403 OPT_SEL_1& OPT_SEL_2
Pin 8 & 9low?
Radio couldnot PTT
externally
U409Pin 52, 6
low?
See FGUTroubleshooting
chart
LED shouldlight up
CheckMCU
PTT
NO
YES
YES
No
No
NO
YES YES
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
YES
YES
NO
NO
YES
EXTSPKR
EXTPTT
INTAUDIO
J403 Pin 9 low?Pin 8 high?
ASFIC U404 Pin14 & 15 high?
CheckAccessories
CheckU404
CheckU420 Audio PA
NO
NO
YES
YES
J403 Audioat Pin 2 &
Pin 3
Check Spk. FlexConnection
Audio atAudioPA(U420)input
(U447)
Audio from Pin 41ASFIC, U404?
Check ASFICU404
CheckAudio PA(U420)
Check U301LV ZIF
Audio atPin 2
U404?
NO
NO
NO
YES
YES
NO
YES
Troubleshooting Flow Chart for Controller
http:/
/www.m
yrad
io168
.net
5B-30 Troubleshooting charts
Bad SINADBad 20dB Quieting
No Recovered Audio
START
Audio at pin 27of U301?
Check ControllerYes
No
Spray of inject 1st IF intoXTAL Filter
IF Freq: 45.1MHz
Audio heard?BYes
No
Check 2nd LO ControlVoltage at C363
VCO locked?BYes
16.8 MHzcheck at pin 22
U301?
Activity onU301 sel pin?
Check FGU
No
No
A
A
Yes
Check Q320 bias cir-cuitry for faults.
Rotate Freq. Knob
Check controller.
Before replacing U301, check 2nd VCOQ320. Check VCO O/P level, C351,
C352.
Yes
No
Troubleshooting Flow Chart for Receiver (Sheet 1 of 2)
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5B-31
IF Signal atL311?
No
RF Signal atT301?
RF Signal atC310?
No
RF Signal atC307?
No
RF Signal atC301?
No or
Check harmonic filters L101 & L102 and ant.switches CR101, CR102, L104
Check filter between C301& C307; program filter to
schematic test freq andcheck varactor voltages.
Inject RF into J101
Are varactorvoltages OK?
No
Yes
Check RF amp (Q301)Stage.
Check filter betweenC310 & T301.
Yes
Check T301, T302,CR306, R308, R309,
R310Yes
1st LO O/POK?
Locked?
Yes
Check FGU
Yes
Trace IF signalfrom L311 to
Q302. Check forbad XTAL filter.
No
Yes Q302 collectorOK?
IF signalpresent?
Before replacingU301, check
U301 voltages;trace IF signal
path.
Yes
Check for 2.6VDC
Is R5 present?
Check Q210, U201(pin 48) voltages and
U247
No
No
No
Check U404 voltage. U404can be selected by MCUbefore replacing U404.
Check varactor filter.
No
Yes
Yes
Yes
A
A
B
weak RF
Troubleshooting Flow Chart for Receiver (Sheet 2 of 2)
http:/
/www.m
yrad
io168
.net
5B-32 Troubleshooting charts
START
No Power
Is There B+Bias for Ant
switch
Check Q111
Is CurrentOK?
Is Control VoltageHigh or Low
Check PCIC
1. Check Pin Diodes2. Check Harmonic Filter
Inspect/Repair Tx. Out-put Network
Is PowerOK?
Done
Check Drive toModule
Is DriveOK? Troubleshoot
VCO
Inspect PA Network/CheckPower Out of U101 at Cap
C160
Is PowerOK?
Replace U101
Is PowerOK?
Replace Q101
Done
Done
No
Yes
Yes No
No
Yes
Low
High
No
Yes
Yes
No
Yes
No
Troubleshooting Flow Chart for Transmitter
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5B-33
5Vat pin 6 ofCR201
Is informationfrom µP U409
correct?
Is U201 Pin 18AT 4.54 VDC?
Is U201 Pin 47AT = 13 VDC
Is U241 Pin 19<0.7 VDC in RX &>4.3 VDC in TX?
Start
Visualcheck of theBoard OK?
CorrectProblem
Check 5VRegulator
+5V at U201Pin’s
13 & 30?
Is 16.8MHzSignal at
U201 Pin 19?
Check FL201, C206,C207, C208, CR203 &
R204
Are signalsat Pin’s 14 &15 of U201?
CheckL202 Check Q260,
Q261 & R260
U201 pin 2 at>3V in Tx and<0.7V in Rx
Replace U201
RemoveShorts
Is there a shortbetween Pin 47 and
Pins 14 & 15 ofU201?
Replace orresolder
necessarycomponents
Is RF level atU201 Pin 32>-30 dBm?
Are R231,R232,R233,C231,C232,
& C233 OK?
Replace U201
If L261, C263 & C264are OK, then see VCOtroubleshooting chart
Are Waveformsat Pins 14 & 15
triangular?
Do Pins 7,8 & 9of U201 togglewhen channel is
changed?
Check programminglines between U409
and U201 Pins 7,8 & 9
Replace U201
Check uP U409Troubleshooting
Chart
NO
YES
NO
YES
NO
YES
NO
YES
NO
NO
NO
YES
YES
NO
YES
YES
NO
YES
YES
YES
NO
NO
NO
NO
YES
NO
YES
YES
Check CR201, U210,U211, C258, C259 &
C228
3.3V at U201pins 5, 20, 34 &
36
Check U248,L201 & L202
Is16.8MHzsignal atU201 pin
23?
ReplaceU201
YES
NO
NO
YES
NO
YES
Troubleshooting Flow Chart for Synthesizer
http:/
/www.m
yrad
io168
.net
5B-34 Troubleshooting charts
START
No LO?
Tx Carrier?
VCO OK
CheckR260
TRB = 5V?Pin 10>1V?
L253 O/C? ChangeL253
ChangeU241
AUX 3High?
Check U201Pin 2 for 3.2V
Pin 19 =0V
AUX 4High?
ChangeQ261
V ctrl 0Vor 13V?
L243 OpenCircuit?
ChangeU241
ChangeL243
ChangeU201
Check for faulty parts or dryjoints of L271, L273, C370,
C386, R339 & L320
A
A
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
Check R245 for dryjoint or faulty
No
Troubleshooting Flow Chart for VCO
http:/
/www.m
yrad
io168
.net
5C-1
Section 5C
MODEL CHART AND TEST SPECIFICATIONS (450-527MHZ)
1.0 Model Chart
GP Series, UHF Band 2, 450-527 MHzModel Description
AZH38SDC9AA3 GP328 Plus 450-527 MHz 4W 16 CH
AZH38SDH9AA6 GP338 Plus 450-527 MHz 4W 128 CH
Item Description
X PMUE1701 GP328 Plus Super Tanapa 450-527 MHz 4W 16CH
X PMUE1702 GP338 Plus Super Tanapa 450-527 MHz 4W 128CH
X PMUE1705 GP328 Plus Tanapa 450-527 MHz 4W 16CH
X PMUE1706 GP338 Plus Tanapa 450-527 MHz 4W 128CH
X PMHE4004 GP328 Plus B/C Kit 450-527 MHz 4W 16CH
X PMHE4011 GP338 Plus B/C Kit 450-527 MHz 4W 128CH
X PMHE4002 GP328 Plus Front Housing Kit 16CH
X PMHE4003 GP338 Plus Front Housing Kit 128CH
X X NAE6483 Monopole (Whip) antenna (403-520 MHz)
X X PMAE4008 Monopole (Whip) antenna (470-530 MHz)
X X PMAE4006 UHF 9 cm antenna (465-495 MHz)
X X PMAE4007 UHF 9 cm antenna (490-527 MHz)
X 6804022G48 GP328 Plus User Guide
X 6804112J64 GP338 Plus User Guide
x = Indicates one of each is required.
http:/
/www.m
yrad
io168
.net
5C-2 Specifications (for GP328 Plus)
2.0 Specifications (for GP328Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
UHF
Frequency: 450-527 MHz
Channel Capacity: GP328 Plus : 16 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x30.5mm
101.5mm x 55.5mm x35.5mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
250 g
270 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT4845
UHF
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 450-527 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
UHF12.5kHz
UHF 20/25kHz
Frequency: 450-527MHz
450-527MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
Specifications (for GP338 Plus) 5C-3
3.0 Specifications (for GP338Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
UHF
Frequency: 450-527 MHz
Channel Capacity: GP338 Plus : 128 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x33.0mm
101.5mm x 55.5mm x38.0mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
265 g
285 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
FCC ID AZ489FT4845
UHF
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 450-527 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
UHF12.5kHz
UHF 20/25kHz
Frequency: 450-527MHz
450-527MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
5C-4 Transmitter
4.0 Transmitter
4.1 General(Refer to Figure 5-1)
The UHF transmitter contains five basic circuits:
1. Power Amplifier
2. Antenna Switch
3. Harmonic Filter
4. Antenna Matching Network
5. Power Control Integrated Circuit (PCIC).
4.1.1 Power Amplifier
The power amplifier consists of two devices:
1. 9Z67 LDMOS driver IC (U101) and
2. PRF1507 LDMOS PA (Q110).
The 9Z67 LDMOS driver IC contains a 2 stage amplification with a supply voltage of 7.3V.
This RF power amplifier is capable of supplying an output power of 0.3W (pin 6 and 7) with an inputsignal of 2mW (3dBm) (pin16). The current drain would typically be 160mA while operating in thefrequency range of 450-527MHz.
The PRF1507 LDMOS PA is capable of supplying an output power of 7W with an input signal of0.3W. The current drain would typically be 1300mA while operating in the frequency range of 450-527MHz. The power output can be varied by changing the biasing voltage.
Figure 5-1: Transmitter Block Diagram
PCIC
Antenna
P ADriver
Vcontrol Vcontrol
From VCO
Jack
PA-FinalStage
Antenna Switch/Harmonic Filter/
Matching Network
http:/
/www.m
yrad
io168
.net
Transmitter 5C-5
4.1.2 Antenna Switch
The antenna switch circuit consists of two PIN diodes (CR101 and CR102), a pi network (C107, L104and C106), and two current limiting resistors (R101, R170). In the transmit mode, B+ at PCIC (U102)pin 23 will go low and turn on Q111 where a B+ bias is applied to the antenna switch circuit to bias thediodes "on". The shunt diode (CR102) shorts out the receiver port, and the pi network, whichoperates as a quarter wave transmission line, transforms the low impedance of the shunt diode to ahigh impedance at the input of the harmonic filter. In the receive mode, the diodes are both off, andhence, there exists a low attenuation path between the antenna and receiver ports.
4.1.3 Harmonic Filter
The harmonic filter consists of C104, L102, C103, L101 and C102. The design of the harmonic filterfor UHF is that of a modified Zolotarev design. It has been optimized for efficiency of the powermodule. This type of filter has the advantage that it can give a greater attenuation in the stop-band fora given ripple level. The harmonic filter insertion loss is typically less than 1.2dB.
4.1.4 Antenna Matching Network
A matching network which is made up of L116 is used to match the antenna's impedance to theharmonic filter. This will optimize the performance of the transmitter and receiver into an antenna.
4.1.5 Power Control Integrated Circuit (PCIC)
The transmitter uses the Power Control IC (PCIC), U102 to regulate the power output of the radio.The current to the final stage of the power module is supplied through R101, which provides a voltageproportional to the current drain. This voltage is then fedback to the Automatic Level Control (ALC)within the PCIC to regulate the output power of the transmitter.
The PCIC has internal digital to analog converters (DACs) which provide the reference voltage of thecontrol loop. The reference voltage level is programmable through the SPI line of the PCIC.
There are resistors and integrators within the PCIC, and external capacitors (C133, C134 and C135)in controlling the transmitter rising and falling time. These are necessary in reducing the powersplatter into adjacent channels.
CR105 and its associated components are part of the temperature cut back circuitry. It senses theprinted circuit board temperature around the transmitter circuits and output a DC voltage to the PCIC.If the DC voltage produced exceeds the set threshold in the PCIC, the transmitter output power will bereduced so as to reduce the transmitter temperature.
http:/
/www.m
yrad
io168
.net
5C-6 Receiver
5.0 Receiver
5.1 Receiver Front-End(Refer to UHF Band 2 Receiver Front End Schematic Diagram on page 5C-22 and UHF Band 2Transmitter Schematic Diagram on page 5C-26)
The RF signal is received by the antenna and applied to a low-pass filter. For UHF, the filter consistsof L101, L102, C102, C103, C104. The filtered RF signal is passed through the antenna switch. Theantenna switch circuit consists of two PIN diodes(CR101 and CR102) and a pi network (C106, L104and C107).The signal is then applied to a varactor tuned bandpass filter. The UHF bandpass filtercomprises of L301, L302, C302, C303, C304, CR301 and CR302. The bandpass filter is tuned byapplying a control voltage to the varactor diodes(CR301 and CR302) in the filter.
The bandpass filter is electronically tuned by the DACRx from IC404 which is controlled by themicroprocessor. Depending on the carrier frequency, the DACRx will supply the tuned voltage to thevaractor diodes in the filter. Wideband operation of the filter is achieved by shifting the bandpass filteracross the band.
The output of the bandpass filter is coupled to the RF amplifier transistor Q301 via C307. After beingamplified by the RF amplifier, the RF signal is further filtered by a second varactor tuned bandpassfilter, consisting of L306, L307, C313, C317, CR304 and CR305.
Both the pre and post-RF amplifier varactor tuned filters have similar responses. The 3 dB bandwidthof the filter is about 50 MHz. This enables the filters to be electronically controlled by using a singlecontrol voltage which is DACRx .
Figure 5-2: UHF Receiver Block Diagram
Demodulator
Synthesizer
CrystalFilter
MixerVaractorTuned Filter
RF AmpVaractorTuned Filter
Pin DiodeAntennaSwitchRF Jack
Antenna
AGC
Control Voltagefrom ASFIC
First LOfrom FGU
Recovered AudioSquelch
RSSI
IF IC
SPI Bus
16.8 MHzReference Clock
SecondLO VCO
U301
IF Amp
http:/
/www.m
yrad
io168
.net
Receiver 5C-7
The output of the post-RF amplifier filter which is connected to the passive double balanced mixerconsists of T301, T302 and CR306. Matching of the filter to the mixer is provided by C381. Aftermixing with the first LO signal from the voltage controlled oscillator (VCO) using low side injection, theRF signal is down-converted to the 45.1 MHz IF signal.
The IF signal coming out of the mixer is transfered to the crystal filter (FL301) through a resistor padand a diplexer (C322 and L310). Matching to the input of the crystal filter is provided by C324 andL311. The crystal filter provides the necessary selectivity and intermodulation protection.
5.2 Receiver Back-End(Refer to UHF Band 2 Receiver Back End Schematic Diagram on page 5C-23)
The output of crystal filter FL301 is matched to the input of IF amplifier transistor Q302 bycomponents R352 and C325. Voltage supply to the IF amplifier is taken from the receive 5 volts (R5).The IF amplifer provides a gain of about 7dB. The amplified IF signal is then coupled into U301(pin 3)via C330, C338 and L330 which provides the matching for the IF amplifier and U301.
The IF signal applied to pin 3 of U301 is amplified, down-converted, filtered, and demodulated, toproduce the recovered audio at pin 27 of U301. This IF IC is electronically programmable, and theamount of filtering (which is dependent on the radio channel spacing) is controlled by themicroprocessor. Additional filtering, once externally provided by the conventional ceramic filters, isreplaced by internal filters in the IF module (U301).
The IF IC uses a type of direct conversion process, whereby the externally generated second LOfrequency is divided by two in U301 so that it is very close to the first IF frequency. The IF IC (U301)synthesizes the second LO and phase-locks the VCO to track the first IF frequency. The second LOis designed to oscillate at twice the first IF frequency because of the divide-by-two function in the IFIC.
In the absence of an IF signal, the VCO will “search” for a frequency, or its frequency will vary close totwice the IF frequency. When an IF signal is received, the VCO will lock onto the IF signal. Thesecond LO/VCO is a Colpitts oscillator built around transistor Q320. The VCO has a varactor diode,CR310, to adjust the VCO frequency. The control signal for the varactor is derived from a loop filterconsisting of C362, C363, C364, R320 and R321.
The IF IC (U301) also performs several other functions. It provides a received signal-strengthindicator (RSSI) and a squelch output. The RSSI is a dc voltage monitored by the microprocessor,and used as a peak indicator during the bench tuning of the receiver front-end varactor filter. TheRSSI voltage is also used to control the automatic gain control (AGC) circuit at the front-end.
The demodulated signal on pin 27 of U301 is also used for squelch control. The signal is routed toU404 (ASFIC) where squelch signal shaping and detection takes place. The demodulated audiosignal is also routed to U404 for processing before going to the audio amplifier for amplification.
http:/
/www.m
yrad
io168
.net
5C-8 Receiver
5.3 Automatic Gain Control Circuit(Refer to UHF Band 2 Receiver Front End Schematic Diagram on page 5C-22)
The front end automatic gain control circuit is to provide automatic gain reduction of the front end RFamplifier via feedback. This action is necessary to prevent overloading of back end circuits. This isachieved by drawing some of the output power from the RF amplifier’s output. At high radiofrequencies, capacitor C331 provides the low impedance path to ground for this purpose. CR308 is aPIN diode used for switching the path on or off. A certain amount of forward biasing current is neededto turn the PIN diode on. Transistors Q315 provides this current where upon saturation, current willflow via R347, PIN diode, collector and emitter of Q315 and R319 before going to ground. Q315 is anNPN transistor used for switching here. Maximum current flowing through the PIN is mainly limited bythe resistor R319.
Radio signal strength indicator, RSSI, a voltage signal, is used to drive Q315 to saturation henceturning it on. RSSI is produced by U301 and is proportional to the gain of the RF amplifier and theinput RF signal power to the radio.
Resistor network at the input to the base of Q315 is scaled to turn on Q315, hence activating theAGC, at certain RSSI levels. In order to turn on Q315, the voltage across the transistor’s base toground must be greater or equal to the voltage across R319, plus the base-emitter voltage (Vbe)present at Q315. The resistor network with thermistor RT300 is capable of providing temperaturecompensation to the AGC circuit, as RSSI generated by U301 is lower at cold temperaturescompared to normal operation at room temperature. Resistor R300 and capacitor C397 form an R-Cnetwork used to dampen any transient instability while the AGC is turning on.
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5C-9
6.0 Frequency Generation Circuitry
The Frequency Generation Circuitry is composed of two main ICs, the Fractional-N synthesizer(U201), and the VCO/Buffer IC (U241). Designed in conjunction to maximize compatibility, the twoICs provide many of the functions that normally would require additional circuitry. The synthesizerblock diagram illustrates the interconnect and support circuitry used in the region. Refer to therelevant schematics for the reference designators.
The synthesizer is powered by regulated 5V and 3.3V which come from U247 and U248 respectively.The synthesizer in turn generates a superfiltered 4.5V which powers U241.
In addition to the VCO, the synthesizer must interface with the logic and ASFIC circuitry.Programming for the synthesizer is accomplished through the data , clock and chip select lines fromthe microprocessor. A 3.3V dc signal from synthesizer lock detect line indicates to the microprocessorthat the synthesizer is locked.
Transmit modulation from the ASFIC is supplied to pin10 of U201. Internally the audio is digitized bythe Fractional-N and applied to the loop divider to provide the low-port modulation. The audio runsthrough an internal attenuator for modulation balancing purposes before going out to the VCO.
Figure 5-3: Frequency Generation Unit Block Diagram
VoltageMultiplier
SynthesizerU201
DualTran-sistor
LoopFilter
VCOBICU241
LowPassFilter
MatchingNetwork
Attenuator
ToMixer
ToPA Driver
VCP
Vmult1Aux3
Aux4
MOD Out
ModulatingSignal
Vmult2
Rx VCO Circuit
Tx VCO Circuit
TRB
16.8 MHzRef. Osc.
Rx Out
Tx Out
http:/
/www.m
yrad
io168
.net
5C-10 Frequency Generation Circuitry
6.1 Synthesizer(Refer to UHF Band 2 Synthesizer Schematic Diagram on page 5C-24)
The Fractional-N Synthesizer uses a 16.8MHz crystal (FL201) to provide a reference for the system.The LVFractN IC (U201) further divides this to 2.1MHz, 2.225MHz, and 2.4MHz as referencefrequencies. Together with C206, C207, C208, R204 and CR203 , they build up the referenceoscillator which is capable of 2.5ppm stability over temperatures of -30 to 85°C. It also provides16.8MHz at pin 19 of U201 to be used by ASFIC and LVZIF.
The loop filter which consist of C231, C232, C233, R231, R232 and R233 provides the necessary dcsteering voltage for the VCO and determines the amount of noise and spur passing through .
In achieving fast locking for the synthesizer, an internal adapt charge pump provides higher current atpin 45 of U201 to put synthesizer within the lock range. The required frequency is then locked bynormal mode charge pump at pin 43 .
Both the normal and adapt charge pumps get their supply from the capacitive voltage multiplier whichis made up of C258, C259, C228, triple diode CR201 and level shifters U210 and U211. Two 3.3Vsquare waves ( 180 deg out of phase) are first shifted to 5V, then along with regulated 5V , putthrough arrays of diodes and capacitors to build up 13.3V at pin 47 of U201.
Figure 5-4: Synthesizer Block Diagram
DATA
CLK
CEX
MODIN
VCC, DC5V
XTAL1
XTAL2
WARP
PREIN
VCP
REFERENCEOSCILLATOR
VOLTAGEMULTIPLIER
VOLTAGECONTROLLEDOSCILLATOR
2-POLELOOPFILTER
DATA (U409 PIN 100)
CLOCK (U409 PIN 1)
CSX (U409 PIN 2)
MOD IN (U404 PIN 40)
+5V (U247 PIN 4)
7
8
9
10
13, 30
23
24
25
32
47
VMULT2 VMULT1
BIAS1
SFOUT
AUX3
AUX4
IADAPTIOUT
GND
FREFOUT
LOCK 4
19
6, 22, 23, 24
4345
3
2
28
14 15
40
FILTERED 5V
STEERINGLINE
LOCK (U409 PIN 56)
PRESCALER IN
LO RF INJECTION
TX RF INJECTION(1ST STAGE OF PA)
FREF (U201 PIN 21 & U404 PIN 34)
39BIAS2
41
DUALTRANSIS
DUALTRANSIS-
48
5VR5
5, 20, 34, 36(U248 PIN 5)
AUX1
VDD, 3.3V MODOUT
U251LOW VOLTAGEFRACTIONAL-NSYNTHESIZER
TORS
TORS
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5C-11
6.2 VCO - Voltage Controlled Oscillator(Refer to UHF Band 2 Voltage Controlled Oscillator Schematic Diagram on page 5C-25)
Figure 5-5: VCO Block Diagram
The VCOBIC (U241) in conjunction with the Fractional-N synthesizer (U201) generates RF in boththe receive and the transmit modes of operation. The TRB line (U241 pin 19) determines whichoscillator and buffer will be enabled. A sample of the RF signal from the enabled oscillator is routedfrom U241 pin 12, through a low pass filter, to the prescaler input (U201 pin 32). After frequencycomparison in the synthesizer, a resultant CONTROL VOLTAGE is received at the VCO. This voltageis a DC voltage between 3.5V and 9.5V when the PLL is locked on frequency.
Presc
RX
TX
MatchingNetwork
Low PassFilter
Attenuator
Pin8
Pin14
Pin10
Level ShifterNetwork
5V
(U201 Pin28)
VCC Buffers
TX RF Injection
U201 Pin 32
AUX4 (U201 Pin3)
AUX3 (U201 Pin2)
Prescaler Out
Pin 12Pin 19Pin 20
TX/RX/BSSwitching Network
U241VCOBIC
RxActive Bias
TxActive Bias
Pin2
Rx-I adjust
Pin1
Tx-I adjust
Pins 9,11,17Pin18
VsensCircuit
Pin15
Pin16
RX VCOCircuit
TX VCOCircuit
RX Tank
TX Tank
Pin7
Vcc-Superfilter
Collector/RF in
Pin4
Pin5
Pin6
RX
TX
(U201 Pin28)
Rx-SW
Tx-SW
Vcc-Logic
(U201 Pin28)
Steer LineVoltage(VCTRL)
Pin13
Pin3
TRB_IN
LO RF INJECTION
VSF
VSF
VSF
http:/
/www.m
yrad
io168
.net
5C-12 Frequency Generation Circuitry
The VCOBIC(U241) is operated at 4.54 V (VSF) and Fractional-N synthesizer (U201) at 3.3V. Thisdifference in operating voltage requires a level shifter consisting of Q260 and Q261 on the TRB line.
The operation logic is shown in Table 5-1.
In the receive mode, U241 pin 19 is low or grounded. This activates the receive VCO by enabling thereceive oscillator and the receive buffer of U241. The RF signal at U241 pin 8 is run through amatching network. The resulting RF signal is the LO RF INJECTION and it is applied to the mixer atT302 (refer to UHF Band 2 Receiver Front End Schematic Diagram on page 5C-22).
During the transmit condition, when PTT is depressed, five volts is applied to U241 pin 19. Thisactivates the transmit VCO by enabling the transmit oscillator and the transmit buffer of U241. The RFsignal at U241 pin 10 is injected into the input of the PA module (U101 pin16). This RF signal is theTX RF INJECTION. Also in transmit mode, the audio signal to be frequency modulated onto thecarrier is received through the U201 pin 41.
When a high impedance is applied to U241 pin19, the VCO is operating in BATTERY SAVER mode.In this case, both the receive and transmit oscillators as well as the receive transmit and prescalerbuffer are turned off.
Table 5-1: Level Shifter Logic
DesiredMode AUX 4 AUX 3 TRB
Tx Low High (@3.2V) High (@4.8V)
Rx High Low Low
Battery Saver Low Low Hi-Z/Float (@2.5V)
http:/
/www.m
yrad
io168
.net
Notes For All Schematics and Circuit Boards 5C-13
7.0 Notes For All Schematics and Circuit Boards* Component is frequency sensitive. Refer to the Electrical Parts List for value and usage.
1. Unless otherwise stated, resistances are in Ohms (k = 1000), and capacitances are in picofarads(pF) or microfarads (µF).
2. DC voltages are measured from point indicated to chassis ground using a Motorola DC multime-ter or equivalent. Transmitter measurements should be made with a 1.2 µH choke in series withthe voltage probe to prevent circuit loading.
3. Reference Designators are assigned in the following manner:
100 Series = Transmitter
200 Series = Frequency Generation
300 Series = Receiver
400/500 Series = Controller
600 Series = Keypad Board
4. Interconnect Tie Point Legend:
UNSWB+ = Unswitch Battery Voltage (7.5V)
SWB+ = Switch Battery Voltage (7.5V)
R5 = Receiver Five Volts
CLK = Clock
Vdda = Regulated 3.3 Volts (for analog)
Vddd = Regulated 3.3 Volts (for digital)
CSX = Chip Select Line (not for LVZIF)
SYN = Synthesizer
DACRX = Digital to Analog Voltage (For Receiver Front End Filter)
VSF = Voltage Super Filtered (5 volts)
VR = Voltage Regulator
6-LAYER CIRCUIT BOARD DETAIL VIEWINGCOPPER STEPS IN PROPER LAYER SEQUENCE
LAYER 1 (L1)
LAYER 2 (L2)LAYER 3 (L3)LAYER 4 (L4)
LAYER 5 (L5)LAYER 6 (L6)
INNER LAYERS
SIDE 1
SIDE 2
http:/
/www.m
yrad
io168
.net
5C-14 Notes For All Schematics and Circuit Boards
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
Circu 5C-15
8.0
R34
2
C10
1
C102
C10
4
C10
3
C106
C107
C141
C188
CR
101
CR102
L101
L102L104
L105
SH100
C30
8
C304
C301
C30
5C
302
C30
3
CR301
CR302
L301
L302
R301R302
SH301
2
C384C38551 C
364
C352
C349
C350
C353
C35
4
C363
CR
310
L325 L332
PB504
Q320R355
R32
2
R34
5
R32
0
R321
R32
4
R34
6
SH321
VR444
C50
5
C512 C513
C50
2
Q505
Q502
R506
R50
7
R505
VR501
C140
C51
1 C51
4
C520
CR5032
3 4
L116
PB
505
R501
R50
2
VR443
UHF Band 2 (450-527MHz) Main Board Top SidePCB No. 8404102G03/G04/G05
.net
it Board/Schematic Diagrams and Parts List
Circuit Board/Schematic Diagrams and Parts List
FL2
01
1 346
40
J200
1
C21
6
B50
3
B50
4
TP201
C21
0
C211
C21
2
C213
C21
4C220
C23
0
C257
C260
C29
4
C292
C22
9C
282 C
283
C203
C21
7
C23
5
C22
8
C23
3
C238
C29
7
C29
1
CR
201
L201
L202
L203
L232
Q210
34
Q26
0
34
R206
R256
R255
SH201
TP202
TP302
U247
C247C251
C28
5
C28
9
C37
0
C37
4
C38
6
C248 C273
C28
6
C27
6
C253
C27
1
C27
2
L282
L243
3
L253
3
L271
L273
L321
Q26
1
34
Q241
R33
3
R33
9
R24
3
R248
R25
3
R26
0
SH241
C109
C11
0
C11
4
C11
8 C119
C121
C12
2C
125C
165
C166
C171
C111
C112
C11
3
C18
1
C115
C116
C117C
120
C161
C127
C131
C12
9
C160C
169
C18
0L114
L115
L106
L107
L108
L113
L117L160
3
2
Q110
1
R10
4R10
6
R10
7
R174R108
R12
0
R17
1
R16
1
R173
R19
1
SH101
U101
9
8
16
1
C37
5
C32
0C31
9
C32
2
C38
1
L309
L310
R30
9
R308
R310
R348
SH303
T30
13 4
6T30
234
6
C32
4
C325
C32
3
FL3
01
L311
R35
1
R352
SH323
C52
1
PB501PB502
VR
440
C328
C39
1
C397
Q315
Q316
R32
6 R338
R300
R314
R31
6
R318
R31
9
R325
R32
7
R33
4
R335
RT
300
RT301
VR
300
C33
1
C396
C333
CR
308
R317
R336
C36
C3
http:/
/www.m
yrad
io168
5C-16 Circuit Board/Schematic Diagrams and Parts List
B50
1
3
CR501
L112
133
C13
4
R109
32
C24
1
C246
C25
5
C28
1
C29
5
C372C371
C373
C37
8
C24
2
C243C250
C24
4
C245C252
C254
CR241
CR242
CR243
CR
251
L241
L251
L281L242
M300
Q310
R330
R33
2
R11
0R
112
R11
1 R349
R242R241
R24
4
R24
5 R25
1
R25
2
R25
4
R331
SH242
U24
1
10
201
11
C20
1
C264
C21
8
C223
C224
C23
1
C29
6
C29
8C
202
C265
C204
C20
6
C20
7
C208
C219
C232
C234 C25
8
C25
9
C263
C29
3 CR203L261
R204
R281
R202
R201
R23
1 R23
2
R23
3
SH202
13
2537
1
U201
U21
0
34
U211
3 4
C277
C215
C27
9
C522 C523
C278
L505
M101
R20
5U248
VR
441
VR
442
VR506
Y20
1
43
2
C525 C526C527 C528C529 C530C531 C532C533 C534C535 C536C537 C538C539 C540C541 C542C543C544C545C546 C547C548C549
C550
C551 C552C553
C555R509
R510
R51
1
UHF BPCB N
.net
2S502
3 5
4
4
C
8
CS501
2
J101
4
3
2
J102
C10
8
C13
2
C17
3
C172
CR
103
CR105
H10
1
M100
P10
0
Q111
34
R101
R17
0
R13
3
R172
C309
C315
C32
1
C39
5
C313
C31
7
C30
7
C310 C31
4
C306C31
1
C380
C316
C31
2
C318CR
304
CR
305
CR
303 L340
L303
L306
L307
L304
L305Q30
1
R30
6
R30
7
R34
0
R34
7
R303R
304
R30
5
R32
8
SH302
C33
7
C383C390
C32
9 C33
6
C344
C34
5
C346
C34
7
C34
8
C33
4
C35
6
C33
9
C34
0
C34
1
C34
2
C343
C357
C360
C35
5
C358
C359
C361
C38
2
L314
L331
R34
3
R350R344
SH322
132537 1
U30
1
M301
32
1
C32
7
C503
C33
0
C32
6
C338
L330
Q30
2R
315
R311R312
R31
3
C130
C138
C151
C170
C12
C12
6
C128
C150C152
CR306
E101
F50
1
R10
2R
329
SH304
VR
439
C10
5
C17
4
C
C13
5
R130
R131R1
25
9
17
U10
2
1
1
and 2 (450-527MHz) Main Board Bottom Sideo. 8404102G03/G04/G05
http:/
/www.m
yrad
io168
Circu 5C-17
ZMY0131026-O
C101
C102
C104
C103
C106
C107C188
CR101
CR102
L101L102
L104
L105
SH100
C140
C141
L116
C511
C514
C520
CR5032
3 4
PB505
R501
R502
VR443
C308
C304
C301
C305
C302C303
CR301
CR302
L301
L302
R301R302
SH301
42
SH321
C505
C512 C513
C502
Q505
Q502
R506
R505
R507
VR501
PB504
21
VR444
362
C384C385
1
C364
C352
49C350
C353C354
C363
CR310
L325L332
Q320
R322
R345R324
R355 R346
UHF Band 2 (450-527MHz) Main Board Top SidePCB No. 8404102G07
.net
it Board/Schematic Diagrams and Parts List
40
J200
1
B503
C210
C211C212
C213C214
C220
C230
C257
C260
C294
C216
C282
C283
C292C229
C203
C217
C235
C228
C233
C238
C297
C291
CR201
FL201
1 3
46
L201
L202
L203
L232
Q210
34
Q260
34
R206
R256R255
SH201
TP201
U247
B504
TP202
TP302
C247C251
C285
C289
C370
C374
C386
C248 C273
C286
C276
C253
C271
C272
L282
L243
3
L253
3
L271
L273
L321
Q261
34
Q241
R333
R243
R248
R253
R260
R339
SH241
C109C110
C114
C118
C119
C121
C122
C125
C165
C166
C171
C111
C112
C113
C115C116
C117
C180
C120
C161
C127
C131C129
C160
C169
C181
L115
L106
L107
L108
L114L113
L117L160
3
2
Q110
1
R104
R174
R106
R107R108
R120
R171
R161
R173
R175R176
R191
SH101
1
16
8
9
U101
C331C333
C396
CR308R336
R3
R317
C375
C320
C319
C322
C381
L309
L310
R309
R308
R310
R348
SH303
T301
3 4
6T302
34
6
PB501PB502
C324
C325
C323
FL301
L311
R351
R352
SH323
C391
C328
C521
C397
Q315
Q316
R326
R334
R335R338
R300
R314
R316
R318
R319R325
R327
RT300
RT301
VR300
VR440
R3
C
C35
C3
R320
http:/
/www.m
yrad
io168
5C-18 Circuit Board/Schematic Diagrams and Parts List
ZMY0131027-O
01
C277
C215
C279
C522
C278
L505
R205U248
VR441VR506
Y201
4
3
2C525 C526C527 C528C529 C530C531 C532C533 C534C535 C536C537 C538
C544C545C546 C547
C549
C550
C555
C539 C540C541 C542C543
C548
R509
R510
C551 C552C553
R511
C201
C264C208
C265
C218
C223
C224
C231
C296
C298
C202
C204
C206
C207
C219
C232
C234 C258
C259
C263
C293 CR203L261
R204
R281R201R202
R231R232
R233
SH202
13
2537
1
U201
U210
34
U211
3 4
C241
C246
C281
C295
C378
C242C243C250
C244
C245
CR241
CR242
CR243
L241
L281L242
R110
R112
R111
R349
R242R241
R244
R245
SH242
U241
10
1
C255
C371C372
C373
C252C254
CR251
L251
Q310
R330R331
R332
R251 R252
R25420
11
UHF BPCB N
.net
2S502
3 5
4
4
C
8
C
2
S501
J101
4
3
21
J102
C337
C383C390
C329
C336
C344
C345
C346
C347
C348
C334
C356
C339
C340
C341
C342
C343
C357
C360
C355
C358
C359
C361
C382
L314
L331
R343
R350R344
1325
37 1
U301
SH322
C309
C315
C321
C311
C307
C310
C314
CR303
L340L303
L304
Q301
R340 R347
R303
R304
R305
R328
C395
C313
C317
C306
C312
C318
C380
C316
CR304
CR305
L306 L307
L305
R306
R307
SH302
C108
C132
C173
C172
CR103
CR105
CR160 H101
P100
Q111
34
R101R170
R133
R172
C105
C130
C138C151
C170
C174
C123
C126
C133
C128
C135
C150C152
C134
E101
L112R102
R109R130
R131 R132
R136
25
917
U102
1
C503
CR306
CR5
F501
R329
SH304
VR439
C327
C326 C330C338
L330
Q302
R315
R311R312
R313
1
2
3
B501
and 2 (450-527MHz) Main Board Bottom Sideo. 8404102G07
http:/
/www.m
yrad
io168
Circu 5C-19
J200
J200-18
J200-16J200-17
J200-36
J200-40J200-39
J200-37
J200-32
J200-33
J200-23
J200-38
J200-28
J200-22
J200-26
J200-34
J200-30
J200-19J200-20
J200-4J200-5J200-6J200-7J200-8J200-9J200-10
J200-29
J200-15
J200-3
J200-24
J200-31
J200-25
J200-1
J200-11J200-12
J200-2
J200-21
J200-27
J200-13J200-14
J200-35
2F
C525100pF100pF
C529 C527100pFC528 C526
100pF 100pF100pFC531
100pFC530
C545 C544100pF 100pFF
6 C542 C541NU NU
C540NU NU
C539NUC543
HF Band 2 Controls And Switches Schematic Diagram (sheet 1 of 2)
.net
it Board/Schematic Diagrams and Parts List
ZMY0130797-O
Vdda
16.8MHz
5V
BATT_CODE
CLK
CSX
DACRX
DATA
DEMOD
EMER
GREEN_LED
LI_ION
LOCK
LVZIF_SEL
MECH_SWB+
MODIN
PTT
RED_LED
RESET
RSSI
RTA0
RTA1
RTA2
RTA3
SB1
SB2
SB3
SWB+
UNSWB+
VOLVOL
Vdda
LVZIF_SEL
MECH_SWB+
MODIN
PTT
RED_LED
RESET
RSSI
RTA0
RTA1
RTA2
RTA3
SB1
SB2
SB3
SWB+
UNSWB+
16.8MHz
5V
BATT_CODE
CLK
CSX
DACRX
DATA
DEMOD
EMER
GREEN_LED
LI_ION
LOCK
DATALVZIF_SEL
CLK
PTT
LI_ION
CSX
RTA1RTA0
MECH_SWB+GREEN_LED
RED_LEDVOL
EMERSB3SB2
RTA3
BATT_CODE
RTA2
Vdda
DACRX
SWB+
SWB+
MODIN
SB1
RSSI
16.8MHz
UNSWB+
LOCK
5V
DEMOD
RESET
100pFC536
100pFC535 C533
100pF100pFC537 C534 C53
100pF 100p100pFC538
100pFC552
100pFC550
100pFC549C553
100pFC551100pF NU
C548100pFC547
100pC54
NUR509
C555100pF
NUR511
0R510
U
http:/
/www.m
yrad
io168
5C-20 Circuit Board/Schematic Diagrams and Parts List
ATT+
BATTERY_CONTACT
BATT-
ITCHB505
2B1
4B2
L505390nH
CONN_J
B501
2DATA
1NEG
3POS
RADIO_CODE
UHF B
.net
NU
B
NU
Q502NU
DUMMY
P100
16.28nHL116
47KR506
VR506
6.8V
SWP
1 A1
3 A2
C1418.2pF
NU
24V
21
C140
F501
GND1
PC01
PC12
PC24 8PC3
SWITCH
S501
C0C0
C1 C1
GND
7 9
R501680
R502180
Q505
C502
0.47uF
VR5016.8V
4
LOW
1
5
HIG
H
3
6TAB1
7TAB2
2
SWITCHS502
100pFC511
100pFC512
1 A1
3 A2
2B1
4B2
SWITCHPB501
10KR505
IMX1
5
1
6
6.8V
VR443
6.8V
SWITCHPB504
1 A1
3 A2
2B1
4B2
VR444
6.8V
VR440
B503if
12VVR439
2
4
3TAB1
1TAB2
2
TAB33
TAB44
TAB55
ANTENNA_NUT
J102
R5070
2 4
1 3CR503
K2
K3
VR441
6.8V
CR160
A1
A2
A3
K1
C522.01uF
if
4GND
1
2
3
RF_JACK
J101RF_JACK
.01uFC520
C503
C521
100pF
.01uF
100pF 100pFC514C513
3 A2
2B1
4B2
PB502SWITCH
1 A1
CR5011
2
B504
100pF
C505
LI_ION
BATT_CODE
Vdda
MECH_SWB+
PTT
SB2
Vdda
VOL
UNSWB+
EMER
GREEN_LED
SWB+
RED_LED
RTA0
RTA1
RTA2
RTA3
SB1
and 2 Controls And Switches Schematic Diagram (sheet 2 of 2)
http:/
/www.m
yrad
io168
Circu 5C-21
BATT+
BATTERY_CONTACT
BATT-
L505390nH
2DATA
1NEG
3POS
CONN_J
B501
506
.8V
2B1
4B2
SWITCHPB505
RADIO_CODE
01002-O
UHF Band 2 Controls And Switches Schematic Diagram(sheet 2 of 2 for 8404102G07 PCB)
.net
it Board/Schematic Diagrams and Parts List
NU
NU
NU
Q502
NU
24V
21
C140
F501
PC01
PC12
PC24 8PC3
SWITCH
S501
C0C0
C1 C1
GND
7 9
GND1
R501680
R502180
Q505
C502
0.47uF
VR5016.8V
4
LOW
1
5
HIGH
3
6TAB1
7TAB2
2
SWITCHS502
100pFC511
100pFC512
A1
3 A2
2B1
4B2
SWITCHPB501
1
10KR505
DUMMY
P100
16.28nHL116
if
12VVR439
2
4
3
B503
TAB22
TAB33
TAB44
TAB55
ANTENNA_NUT
J102
TAB11
R5070
2 4
1 3CR503
VR441
6.8V
CR160
A1
A2
A3
K1
K2
K3
.01uF
if
4GND
1
2
3
C522
J101RF_JACK
47KR506
RF_JACK
VR
1 A1
3 A2
C1418.2pF
C503
C521
100pF
.01uF
100pF 100pFC514C513
3 A2
2B1
4B2
PB502SWITCH
1 A1
CR501
1
2
B504
100pF
IMX1
5
1
6
C505
6.8VVR443
A1
3 A2
2B1
4B2
VR444
6.8V
SWITCHPB504
1
6.8V
VR440
.01uFC520
LI_ION
BATT_CODE
Vdda
MECH_SWB+
PTT
SB2
Vdda
VOL
UNSWB+
EMER
GREEN_LED
SWB+
RED_LED
RTA0
RTA1
RTA2
RTA3
SB1
ZMY013
http:/
/www.m
yrad
io168
6
5C-22 Circuit Board/Schematic Diagrams and Parts List
RX_I
4.7pFC381
R3290
C318
11pFC317
7.5pF
T301
4
6
3
1
2
XFMR
TP302
T302XFMR
46
31 2
C320 C3197.5pF 3.6pF
16.28nHL309R348
3.6K
R338R335
RT301
2 1
C391
NUNU
NUNU
R5
C370100pF
R330RSSI
RX_INJ
NUR331 C372
Q3101
3
2
C371
100pFC386
NU
NUNUNU
0R349
100pFC374
C378C373NU NU
C375
VCOBUF
100pF
R332
L321
0R339
R5
NU
NU
R333NU
R30918
82pFC322
L310150nH
270R308
270R310
2
34
1
CR306
IF50.125MHz26.925MHz
[email protected]@481.825MHz
-50dBm
UHF B
.net
L340390nH
HSMP38201
23
CR308
R3171K
100pFC395 C331
100pF
1KR347
R5
C311
100KR307R306
100K
CR304
C306
CR305
C3127.5pF
12nHL305
C31311pF
L30611.03nH11.03nHL307
4.3pFC316
NU
NU
R305470
R30412K
C321100pF
C309100pF
R3031.5K
Q301
13
2
C3070.1uF
0.1uFC314
180nHL304
C315100pF
C3100.1uF
R3282.7
L30322nH
R3408.2K
11.03nHL302
C308100pF
100KR301
12pFC302
C3058.2pF
CR301 CR302
4.3pFC303
11pFC304
R302
L301
100K
11.03nH 1
CR303
2
3
C3018.2pF
N
1
SH304SHIELD
1
SHIELDSH302
1
SHIELDSH301 SH303
SHIELD
1
RXFE Top Shield RXFE Bottom Shield Mixer Shield
RX Mixer Diode Shield
.01uFC380
100KR342
R5
DACRx
R336
C333R5
NU
NU
33KR327
R31691K
Q315
13
218KR318
R319150
C396NU
R3002.2K
0.47pFC397
1
33.0KRT300
2
R334
Q316
13
2VR300
R326
NU
NU
NU
NU
R3256.8K
[email protected]@526.925MHz
1.850V@
0.508V
4.398V
[email protected]@526.925MHz
Rx1 = [email protected] rf signalRx2 = [email protected] rf signalprobed using high impedence probe
and 2 Receiver Front End Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5C-23
DB
C383100pF
Hz
Vdd_FILTERED
C350330pF
C349.022uF
2KR324
C35120pF
BFQ67WQ320
1
3
212pFC352
0R355
43pFC353
C362.022uF
56pF 100nHL332C385
.01uFC364
CR310R3201K
R3212.4K
C3632.2uF
2.20uHL325
R34656K
200KR322
C35447pF
100pFC390
100KR350
uF45
DEMOD
SH322SHIELD
1
SH321SHIELD
1
LVZIF TOP SHIELD LVZIF BTM SHIELD
C38456pF
10KR345
3.185V 2.628V
2.095V
UHF Band 2 Receiver Back End Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
TE
ST
D
VA
G
VA
G_R
EF
VP
P
RE
D_V
CC
RE
D_V
SS
RO
SE
_VC
CR
OS
E_V
SS
RS
SI_
FLT
RS
SI_
OU
T
TESTAIOUT
LIM
MIX_BYP
MIX_IN
MLPD_CR
PH
AS
E_L
OC
K
PREAMP_OUTPRE_AGC
PR
E_I
N
EM
IT
EX
TB
S
FREFGND
GO
LD_V
CC GOLD_VSS
GREEN_VCC
GREEN_VSS
C4M
C4P
CEXCLK
COL
DATA
DE
MO
D_H
FD
EM
OD
_OU
T
BROWN_VCCBRP_OFF
C1M
C1P
C2M
C2P
C3M
C3P
AF
C
BA
SE
BLUE_VCCBLUE_VSS
U30132D83
1615
24
2120
14
1918
13
17
2223
32 2530 2931 2636 28 27333435
42
464748
41
43
37
403938
4544
8 931 2 54 116 107 12
0.1uFC336
C356.022uF
L3142.2uH
C3411uF
C3391uF
C337100pF
C3401uF
1uFC342
Vdd_FILTERED
R5C3550.33uF
100pFC327
C3280.1uF
2.4KR312
C338
C330
15pF
10pF
R314
330
3K
R313
30KR311
C326.01uF
Q302R351
0
3.3KR352
12KR315
680nHL330
.01uFC325C323
150pF
20pFC324
750nHL311
GN
D2
4
GN
D3
5
OUT3
IN6
TBDXTALFL301
GN
D1
GN
D1
2
IF
10uFC382
C3480.1uF
0.1uFC329
2.20uHL331 R343
10
0.1uFC344
Vdd_FILTERED
(SOURCE)
C3430.22uF
0.1uFC347
0.1uFC346
Vdda
.022uFC334
0.1uFC359
1200pFC358
R34412K
0.22uFC357
16.8M
CLKDATA
LVZIF_SEL
0.1C3
DA
C36110nF
C360.022uF
RSSI
SH323SHIELD
1
CRYSTAL FILTER SHIELD
0.706V
2.683V
http:/
/www.m
yrad
io168
5C-24 Circuit Board/Schematic Diagrams and Parts List
_16.8MHZY201
NU
NUR206
SYNTHESIZER TOP SHIELD SYNTHESIZER BOTTOM SHIELD
SHIELDSH201
SHIELDSH202
L23212uH
47KR204
CR203
C238470pF
1.6pFC208
T3
4.3KR255
30R256
R5
120
R232620
R231
0.1uFC233
560R233
C2310.1uF
C2340.47uF
C232.047uF
TP2021
MODOUT
100pFC277
2.2uFC278
4V_3.3V
C2792.2uFpF
20
GND2
NC
4
3
ON
_OF
F*
VIN
1
VO
UT
5
U248LP2980
940pF 0.47uF
C293
Vdda
SWB+
VCTRL
7.5V
3.3V
[email protected]@527MHz
UHF B
.net
VMULT3VMULT4
WARP
XTAL1XTAL2
SFOUT
TEST1TEST2
VMULT1VMULT2
INDMULT
IOUT
LOCK
MODOUTFREFOUT
IADAPT
AUX1AUX2AUX3AUX4
ADAPTSW
PD
_GN
DP
RE
_GN
D
DG
ND
AG
ND
SFCAP
SFIN
VBPASS
PREIN
PVREF
REFSEL
SFBASE
MODIN
NC1NC2NC3
CCOMP
CEXCLK
DATA
BIAS1BIAS2
VR
OV
CP
PD
_VD
DP
RE
_VD
D
DV
DD
AV
DD
141211
25
2324
28
3738
15
16
43
4
4119
45
48123
46
13 475 34 3620
26
30
21
32
35
18
27
10
172931
98
7
4039
42
44336 22
63A27U201
C2042.2uF
C264100pF
C2630.75pF
C214100pF 100pF
C211R201
R202100K
82K
DATA
100pFC212C210
100pF
L26139nH
MODIN
CLKCSX
PRESC
C2021000pF100pF
C201
VSF
TP2011
330pFC206R281
4.7uFC203
C20756pF
NU
NU
NU
R205
C215
FADJ 2
GN
D4
OUT3
VD
D
1
5V
C216
OSC
NU
1GND GND1
4
OUIN6
FL201
75Z04
100pFC260
100pFC213
5V
LOCK
AUX4
AUX3
Q210
2
4
1
3
16.8MHz
10K
47K
4.7K47K
100C2
C210
2.2uFC235C223
0.1uF
C2240.1uF
L2012.2uH
L2032.2uH
0.47uFC291
C2180.1uF
C2172.2uF
4OUT 3
SD
ADP3300U247
6ERR
1
GN
D
5IN
2NR
0.22uFC219
L2022.2uH
0.1uFC298
C2920.1uF
5V(SOURCE)
C282C283
3 K3
CR201
A1 6A2 5A3 4
K112 K2
NUNU
C2291000pF100pF
C230
.01uFC258
C2284.7uF
C259.01uF
TC7ST04FUU210
3GND
2
1NC
4
5VCC
0.1uFC296
5VCC
TC7ST04FUU211
3GND
2
1
NC
4
C257100pFC265
NU
1.65V
Low (mV)
High (3.3V) High (3.3V)
1.5V
2.3V
3.3V
Rx3.7V1.6V
Tx1.6V3.7V
39 Bias240 Bias1
and 2 Synthesizer Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5C-25
.7pF45
L243
RESONATOR
1
2
3
4.3pFC250
4.3pFC242
4.3pFC243
1 2
CR243
A1 A2
CR241
C241100pF
22nHL242
390nHL241
CR242
24310K
C2443.6pF
Rx_sw
C2470.1uFC248
100pF
C2531.5pF
100pFC251CR251
20pFC252
390nHL251
VSF
VCTRL
RX_I
TX_I
[email protected]@527MHz
UHF Band 2 Voltage Controlled Oscillator Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
TX_IADJ1
TX_OUT10
TX_SWITCH13
VC
C_B
UF
FE
RS
14
VC
C_L
OG
IC
18
RX_EMITTER6
RX_IADJ2
RX_OUT8
RX_SWITCH7
SUPER_FLTR3
TRB_IN19
TX_BASE16
TX_EMITTER15
COLL_RFIN4
FLIP_IN20
GN
D_B
UF
FE
RS
11G
ND
_FLA
G917
GN
D_L
OG
IC
PRESC_OUT12
RX_BASE5
50U54
U241
Rx_sw
Tx_sw
C2730.1uF1.1pF
C272
L27318nH
27nH
1pF
L271
C271
R245240
C2762.2uF
100pFC281
390nHL281
0.1uFC286
100pFC246
2C2
120R242
100pFC285
R24118
15KR244
R
1
3
2 Q241BFQ67W
30R248
L282390nH
R2537.5K
Tx_sw
C2543.3pF
R25133
L253
RESONATOR
1
2
3
100pFC289
100pFC255
R252270
R2548.2K
1KR260
4
1
3
Q261
2
10K
47K
47K
4.7K
2
4
1
3
Q260
C297.01uF
10K
4.7K
47K
47K
1
SHIELDSH242
1
SHIELDSH241
VCO TOP SHIELD VCO BOTTOM SHIELD
AUX 4
AUX 3
5V
VSF
PRESC
NJ
NJ
4.6V
2V
4.6V
http:/
/www.m
yrad
io168
5C-26 Circuit Board/Schematic Diagrams and Parts List
VL6 VLIM 19
TE
MP
30
V10
14
V45
16
17V5EXT
20VAR1
18VAR2
24VAR3
VG
15
22NA
Q11
QX
10
1 RFIN
RS 21
31R
SE
T
RX 23T12
CLK
26
CQ
12
CQ
X13
DA
TA
28
F16
89
GND18
GN
D2
25
INT4U102H99S
AN
O32
BP
OS
27
CE
X29
CI3
CJ5
CL7
C138100pF
CR105
GND
3
1
PO
S
2VOUT
R131
LM50
10KR130
18K
100pFC170
C110100pF
0.1uFC126
.022uFC173
5V
TX_BIAS
RESET
UNSWB+
DATA
CLK
CSX
100pFC122
C105100pF
4
1
3
100pFC132
Q111
2
6
100pFC174
R133
UNSWB+
NU
10K
4.7K47K
47K
C1343300pF
C135.022uF
6pF
.022uFC131
390nHL114
100KR132
UNSWB+
RF
IN6
RF
OU
T1
7R
FO
UT
21
VC
NT
RL
14V
D1
2V
G1
3V
G2
GND1 5GND2 12GND3 13GND4
8N
C1
9N
C2
10N
C3
15N
C4
16
U10109Z67
11G
2 4
100pFC130
C128.022uF
390nHL112
R1085.6K
.022uFC152
UNSWB+
EG6
7.01V Tx
7.08V Tx
0.269V Tx
UHF B
.net
1000pFC127
L115 C133390nH 1000pF
C16100
L113
C129
5.6nH
6.8pF
100pFC165
200KR109
2pFC169
9.1pFC120
100pFC121
C150.022uFC151
100pF
C1610.1uF
200R161
L16015.0nH
56pFC160
33pFC116 C117
30pF
11.03nHL109
4.22nHL108
10R106
100pF
C115
C118
30pF
C125100pF
100pFC295
300R112R110300
20R111
R107TX_INJ_1
TX_INJ
NU
Microstrip Microstrip1
2
3C11111pF
C11247pF
L10733.47nH
0.1R102
C11310pF
BEADE101
C114100pF
C12310uF
200R172
0.1uFC172
Q110 Microstrip
L105C108100pF
390nH
240R170
240R101
C109100pF 7.66nH
L106
UNSWB+
3.3pF
1
A1
2
A2
K 3
C107
CR102
L10412.39nH
4.7pFC106
RX_IN
CR101
L10212.39nH12.39nH
L101
6.2pFC104C103
13pFC1026.2pF
C101100pF
4GND
1
2
3
J101RF_JACK
C141
TAB5 5
C140
TAB11TAB22
TAB3 3TAB4 4
ANTENNA_NUTJ102
9.75nHL116
HEATSINKH101
POS1
NU
NU
43KR120
100pFC119
100pFC171 R173
180K 43KR171
R174NU
SH100SHIELD
1
SHIELDSH101
1
HF SHIELD PA SHIELD
R10447K
C18836pF
1MR13
43R103
6.2R175
6.2R176
3dBM@450MHz Tx3dBM@527MHz Tx
and 2 Transmitter Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5C-27
UHFBoa
CircR
B501B503
B504
C101C102C103C104C105C106C107C108C109C110C111C112C113C114C115C116C117C118C119C120C121C122C123C125C126C127C128C129C130C131C132C133C134C135C138C140C141C150C151C152C160C161
F, 5%F, 5%F, 5%
pF, 10%pF, 10%
F, 5%F, 0.25 pF
F, 5%
, 0.25 pF, 0.25 pF0 pF, +80% / -20%
F, 5%, 10%
F, 5%
F, 5%0 pF, +80% / -20%
F, 5%F, 20%0 pF, +80% / -20%uF, 10%
F, 5%F, 5%0 pF, +80% / -20%pF, 10%
0 pF, +80% / -20%, 0.5 pFF, 5%, 0.1 pFF, 5%, 0.5 pF
0 pF, +80% / -20%F, 5%F, 5%0 pF, +80% / -20%
, 0.5 pFF, 5%0 pF, +80% / -20%
F, 5%, 0.1 pFF, 5%, 0.5 pF, 0.25 pF, 0.5 pF
Description
C321 2113743N50 100 pF, 5%C322 2113743N48 82.0 pF, 5%C323 2113743N54 150 pF, 5%C324 2113743N33 20.0 pF, 5%C325 2113743L41 10000 pF, 10%C326 2113743L41 10000 pF, 10%C327 2113743N50 100 pF, 5%C328 2113743M24 100000 pF, +80% / -20%C329 2113743M24 100000 pF, +80% / -20%C330 2113743N26 10.0 pF, 5%C331 2113743N50 100 pF, 5%C333 NOT PLACEDC334 2113743M08 22000 pF, +80% / -20%C336 2113743M24 100000 pF, +80% / -20%C337 2113743N50 100 pF, 5%C338 2113743N30 15.0 pF, 5%C339 2180478Z20 1.0 uFC340 2180478Z20 1.0 uFC341 2180478Z20 1.0 uFC342 2180478Z20 1.0 uFC343 2113743A23 0.220 uF, 10%C344 2113743M24 100000 pF, +80% / -20%C345 2113743M24 100000 pF, +80% / -20%C346 2113743M24 100000 pF, +80% / -20%C347 2113743M24 100000 pF, +80% / -20%C348 2113743M24 100000 pF, +80% / -20%C349 2113743E07 0.022 uFC350 2113743L05 330 pF, 10%C351 2113743N33 20.0 pF, 5%C352 2113743N28 12.0 pF, 5%C353 2113743N41 43.0 pF, 5%C354 2113743N42 47.0 pF, 5%C355 2113743A24 0.330 uF, 10%C356 2113743M08 22000 pF, +80% / -20%C357 2113743A23 0.220 uF, 10%C358 2113741A23 1200 pF, 5%C359 2109720D14 0.1 uFC360 2113743E07 0.022 uFC361 2113741F49 10000C362 2113743M08 22000 pF, +80% / -20%C363 2311049A40 2.2 uF, 10%C364 2113743L41 10000 pF, 10%C370 2113743N50 100 pF, 5%C371 NOT PLACEDC372 NOT PLACEDC373 NOT PLACEDC374 2113743N50 100 pF, 5%C375 2113743N50 100 pF, 5%C378 NOT PLACEDC380 2113743L41 10000 pF, 10%C381 2113743N18 4.7 pF, 0.25 pF
CircuitRef
MotorolaPart No. Description
.net
it Board/Schematic Diagrams and Parts List
Band 2 Radio Parts List (RFrd)
uitef
MotorolaPart No. Description
0986237A02 Battery Contact Connector3980502Z01 Contact, Backup B+
(not used in GP328 Plus)3980501Z01 Contact, Backup B-
(not used in GP328 Plus)2113740F51 1002113740F22 6.22113740F28 112113740F22 6.22113743N50 100 pF, 5%2113740F19 4.7 pF2113740F15 3.32113743N50 100 pF, 5%2113740F51 1002113743N50 100 pF, 5%2103689A22 11.0, 0.05 pF2180605Z28 33 pF2180605Z20 15 pF2113743N50 100 pF, 5%2113743N31 16.0 pF, 5%2113743N27 11.0 pF, 5%NOT PLACED2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N23 7.5 pF, 0.5 pF2113743N50 100 pF, 5%2113743N50 100 pF, 5%2311049A18 10 uF, 10%2113743N50 100 pF, 5%2113743M24 100000 pF, +80% / -20%2113743L17 1000 pF, 10%2113743M08 22000 pF, +80% / -20%2113743N23 7.5 pF, 0.5 pF2113743N50 100 pF, 5%2113743M08 22000 pF, +80% / -20%2113743N50 100 pF, 5%2113743L17 1000 pF, 10%2113743L29 3300 pF, 10%2113743M08 22000 pF, +80% / -20%2113743N50 100 pF, 5%0662057A67 5600, 5%2113740F25 8.22113743M08 22000 pF, +80% / -20%2113743N50 100 pF, 5%2113743M08 22000 pF, +80% / -20%2113743N44 56.0 pF, 5%2113743M24 100000 pF, +80% / -20%
C165 2113743N44 56.0 pF, 5%C166 2113743N50 100 pF, 5%C169 2113743N09 2.0 pF, 0.25 pFC170 2113743N50 100 pF, 5%C171 2113743N50 100 pF, 5%C172 2113743E20 0.10 uF, 10%C173 2113743M08 22000 pF, +80% / -20%C174 2113743N50 100 pF, 5%C180 NOT PLACEDC181 NOT PLACEDC188 2113743N39 36.0 pF, 5%C201 2113743N50 100 pF, 5%C202 2113743L17 1000 pF, 10%C203 2311049A56 4.7C204 2104993J02 2.2 uFC206 2113740F63 330 , 5%C207 2113743N40 39.0 pF, 5%C208 NOT PLACEDC210 2113743N50 100 pF, 5%C211 2113743N50 100 pF, 5%C212 2113743N50 100 pF, 5%C213 2113743N50 100 pF, 5%C214 2113743N50 100 pF, 5%C215 NOT PLACEDC216 NOT PLACEDC217 2104993J02 2.2 uFC218 2113743M24 100000 pF, +80% / -20%C219 2113743K16 0.220 uF, +80% / -20%C220 2113743N50 100 pF, 5%C223 2113743M24 100000 pF, +80% / -20%C224 2113743M24 100000 pF, +80% / -20%C228 2311049J11 4.7 uF, 10%C229 2113743L17 1000 pF, 10%C230 2113743N50 100 pF, 5%C231 2113743M24 100000 pF, +80% / -20%C232 2113743E12 0.047 uF, 10%C233 2311049A01 0.1C234 2311049A05 0.47 uF, 10%C235 2104993J02 2.2 uFC238 2113741F17 470 pFC241 2113743N50 100 pF, 5%C242 2113743N17 4.3 pF, 0.25 pFC243 2113743N17 4.3 pF, 0.25 pFC244 2113740F14 3.0 pFC245 2113743N12 2.7 pF, 0.25 pFC246 2113743N50 100 pF, 5%C247 2113743N50 100 pF, 5%C248 2113743M24 100000 pF, +80% / -20%C250 2113743N17 4.3 pF, 0.25 pFC251 2113743N50 100 pF, 5%C252 2113743N26 10.0 pF, 5%
CircuitRef
MotorolaPart No. Description
C253 2113740L01 2.0 pFC254 2113743N26 10.0 pC255 2113743N50 100 pC257 2113743N50 100 pC258 2113743L41 10000C259 2113743L41 10000C260 2113743N50 100 pC263 2113743N02 0.75 pC264 2113743N50 100 pC265 NOT PLACEDC271 2113743N03 1.0 pFC272 2113743N04 1.1 pFC273 2113743M24 10000C276 2104993J02 2.2 uFC277 2113743N50 100 pC278 2311049A09 2.2 uFC279 2104993J02 2.2 uFC281 2113743N50 100 pC282 NOT PLACEDC283 NOT PLACEDC285 2113743N50 100 pC286 2113743M24 10000C289 2113743N50 100 pC291 2311049A69 10.0 uC292 2113743M24 10000C293 2113743A27 0.470C294 2113743N50 100 pC295 2113743N50 100 pC296 2113743M24 10000C297 2113743L41 10000C298 2113743M24 10000C301 2113743N24 8.2 pFC302 2113743N28 12.0 pC303 2113740L09 4.3 pFC304 2113743N27 11.0 pC305 2113743N24 8.2 pFC306 NOT PLACEDC307 2113743M24 10000C308 2113743N50 100 pC309 2113743N50 100 pC310 2113743M24 10000C311 NOT PLACEDC312 2113743N23 7.5 pFC313 2113743N27 11.0 pC314 2113743M24 10000C315 2113743N50 100 pC316 2113740L09 4.3 pFC317 2113743N27 11.0 pC318 2113743N23 7.5 pFC319 2113743N15 3.6 pFC320 2113743N23 7.5 pF
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
5C-28 Circuit Board/Schematic Diagrams and Parts List
C382C383C384C385C386C390C391C395C396C397C502C503C505C511C512C513C514C520C521C522C525C526C527C528C529C530C531C532C533C534C535C536C537C538C539C540C541C542C543C544C545C546C547C548C549C550C551C552C553C555CR101
CircuiRef
%%%10%10%
%5%%
5%5%, 5%
5%
5%10%10%
ontactch Switchch Switchch Switchch Switchr 8W 450MHzr Dual NPN / PNPr Dual NPN / PNPistor BFQ67Wr Dual NPN / PNPr Dual NPN / PNP
con Bipolar Transistorcon Bipolar Transistor
r MMBT3904
istor BFQ67Wnsistor NPNr MMBT3904
etal Strip Resistor
escription
R112 0662057M61 300, 5%R120 0662057N14 43 k, 5%R130 0662057M98 10 k, 5%R131 0662057N05 18 k, 5%R132 0662057N33 270 k, 5%R133 NOT PLACEDR136 NOT PLACEDR161 0662057M57 200, 5%R170 0662057A34 240, 5%R171 0662057N14 43 k, 5%R172 0662057A32 200, 5%R173 0662057N29 180 k, 5%R174 0662057N15 47 k, 5%R175 0662057B59 3.0, 5%R176 0662057B59 3.0, 5%R191 0662057C01 0R201 0662057N21 82 k, 5%R202 0662057N23 100 k, 5%R204 0662057N15 47 k, 5%R205 NOT PLACEDR206 NOT PLACEDR231 0662057M52 120, 5%R232 0662057M69 620, 5%R233 0662057M68 560, 5%R241 0662057M32 18, 5%R242 0662057M52 120, 5%R243 0662057M98 10 k, 5%R244 0662057N03 15 k, 5%R245 0662057M59 240, 5%R248 0662057M37 30, 5%R251 0662057M38 33, 5%R252 0662057M60 270, 5%R253 0662057M95 7500, 5%R254 0662057M96 8200, 5%R255 0662057M89 4300, 5%R256 0662057M37 30, 5%R260 0662057M74 1000, 5%R281 NOT PLACEDR300 0662057M82 2200, 5%R301 0662057N23 100 k, 5%R302 0662057N23 100 k, 5%R303 0662057M78 1500, 5%R304 0662057N01 12 k, 5%R305 0662057M66 470, 5%R306 0662057N23 100 k, 5%R307 0662057N23 100 k, 5%R308 0662057M60 270, 5%R309 0662057M32 18, 5%R310 0662057M60 270, 5%R311 0662057N10 30 k, 5%R312 0662057M83 2400, 5%
CircuitRef
MotorolaPart No. Description
.net
2311049A59 10.0 uF, 10%2113743N50 100 pF, 5%2113743N44 56.0 pF, 5%2113743N44 56.0 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%NOT PLACED2113743N50 100 pF, 5%NOT PLACED2311049A07 1.0 uF, 10%2311049A05 0.47 uF, 10%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743L41 10000 pF, 10%2113743L41 10000 pF, 10%2113743L41 10000 pF, 10%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%NOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%NOT PLACED2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%2113743N50 100 pF, 5%4880973Z02 PIN Diode
t MotorolaPart No. Description
CR102 4802245J41 PIN DiodeCR103 4802245J41 PIN DiodeCR105 5185963A15 Temperature SensorCR160 NOT PLACEDCR201 4802233J09 Triple DiodeCR203 4862824C03 Varactor DiodeCR241 4805649Q13 Varactor DiodeCR242 4862824C01 Varactor DiodeCR243 4862824C01 Varactor DiodeCR251 4802245J22 Varactor DiodeCR301 4862824C01 Varactor DiodeCR302 4862824C01 Varactor DiodeCR303 4880154K03 Dual DiodeCR304 4862824C01 Varactor DiodeCR305 4862824C01 Varactor DiodeCR306 4802245J42 Ring Quad DiodeCR308 4802245J41 PIN DiodeCR310 4862824C01 Varactor DiodeCR501 4880107R01 RectifierCR503 4805729G49 Red / Yellow DiodeE101 2484657R01 Inductor Bead ChipF501 6580542Z01 Fuse 3AFL201 4805875Z04 Crystal 16.8 MHzFL301 9186153B01 X’tal FilterH101 2680499Z01 Heat SpreaderJ101 0985613Z01 RF JackJ102 0280519Z02 Antenna NutJ200 0905505Y04 Conn ZIF HorizontalL101 2460591B28 13.37L102 2460591B28 13.37L104 2460591B48 15.22L105 2462587N22 390 nH, 10%L106 2460591A19 8.71L107 2479990G01 33.47 nHL108 2479990A01 4.22 nHL112 2462587N45 22 nH, 5%L113 2413926H09 5.6 nH, 0.3 nHL114 2462587N45 22 nH, 5%L115 2462587N22 390 nH, 10%L116 2479990C02 16.28 nHL117 2409154M17 22.0 nHL160 2413926H14 15.0 nH, 5%L201 2462587Q20 2200 nH, 20%L202 2462587Q20 2200 nH, 20%L203 2462587Q20 2200 nH, 20%L232 2462587P25 12000 nH, 5%L241 2462587V41 390 nH, 10%L242 2462587V26 22 nH, 5%L243 2460593C03 Teflon ResonatorL251 2462587V41 390 nH, 10%L253 2460593C03 Teflon Resonator
CircuitRef
MotorolaPart No. Description
L261 2462587V29 39 nH, 5L271 2462587V27 27 nH, 5L273 2462587V25 18 nH, 5L281 2462587V41 390 nH,L282 2462587V41 390 nH,L301 2479990B01 11.03 nHL302 2479990B01 11.03 nHL303 2462587V26 22 nH, 5L304 2462587V37 180 nH,L305 2462587V23 12 nH, 5L306 2479990B01 11.03 nHL307 2479990B01 11.03 nHL309 2479990C02 16.28 nHL310 2462587V36 150 nH,L311 2462587N65 750 nH,L314 2462587N72 2200 nHL321 NOT PLACEDL325 2480646Z20 2.20 uHL330 2462587N64 680 nH,L331 2480646Z20 2.20 uHL332 2462587N53 100 nH,L340 2462587V41 390 nH,L505 2462587Q42 390 nH,P100 3905643V01 Ground CPB501 4070354A01 Light TouPB502 4070354A01 Light TouPB504 4070354A01 Light TouPB505 4070354A01 Light TouQ110 4813828A09 TransistoQ111 4809939C05 TransistoQ210 4809939C05 TransistoQ241 4805218N63 RF TransQ260 4809939C05 TransistoQ261 4809939C05 TransistoQ301 4802245J44 NPN SiliQ302 4802245J44 NPN SiliQ310 NOT PLACEDQ315 4880214G02 TransistoQ316 NOT PLACEDQ320 4805218N63 RF TransQ502 5180159R01 Dual TraQ505 4880214G02 TransistoR101 0662057A34 240, 5%R102 0680539Z01 Power MR104 0662057N15 47 k, 5%R106 0662057M26 10, 5%R107 NOT PLACEDR108 0662057M92 5600, 5%R109 0662057N30 200 k, 5%R110 0662057M61 300, 5%R111 0662057M33 20, 5%
CircuitRef
MotorolaPart No. D
http:/
/www.m
yrad
io168
Circu 5C-29
R313R314R315R316R317R318R319R320R321R322R324R325R326R327R328R329R330R331R332R333R334R335R336R338R339R340R342R343R344R345R346R347R348R349R350R351R352R355R501R502R505R506R507R509
R510R511RT30RT30S501S502
CircR
.net
it Board/Schematic Diagrams and Parts List
* Motorola Depot Servicing only
0662057M62 330, 5%0662057M85 3000, 5%0662057N01 12 k, 5%0662057A96 91 k, 5%0662057M74 1000, 5%0662057A79 18 k, 5%0662057A29 150, 5%0662057M74 1000, 5%0662057M83 2400, 5%0662057N30 200 k, 5%0662057M81 2000, 5%0662057M94 6800, 5%NOT PLACED0662057N11 33 k, 5%0662057M12 2.7, 5%0662057M01 0, 5%NOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACEDNOT PLACED0662057M01 0, 5%0662057M96 8200, 5%0662057N23 100 k, 5%0662057M26 10, 5%0662057N01 12 k, 5%0662057M98 10 k, 5%0662057N17 56 k, 5%0662057M74 1000, 5%0662057M87 3600, 5%0662057C01 00662057N23 100 k, 5%0662057C01 00662057M86 3300, 5%0662057M01 0, 5%0662057M70 680, 5%0662057M56 180, 5%0662057M98 10 k, 5%0662057N15 47 k, 5%0662057M01 0, 5%0662057M01 0, 5%
(not used in GP328 Plus)0662057M01 0, 5%NOT PLACED
0 0680590Z01 Thermistor 33k1 NOT PLACED
4080710Z01 Channel Switch1880619Z02 Potentiometer (Volume)
uitef
MotorolaPart No. Description
SH100 2680507Z01 Shield, Harmonic FilterSH101 2680510Z01 Shield, PASH201 2680511Z01 Shield, SynthesizerSH202 2680511Z01 Shield, SynthesizerSH241 2604120G01 Shield, VCOSH242 2680514Z01 Shield, VCO Bottom / LVZIFSH301 2680554Z01 Shield, Receiver Front End
TopSH302 2680555Z01 Shield, Receiver Front End
BottomSH303 2680509Z01 Shield, MixerSH304 2680624Z01 Shield, Mixer DiodeSH321 2680508Z01 Shield, LVZIF 2nd LOSH322 2680514Z01 Shield, VCO Bottom / LVZIFSH323 2604082P01 Shield, X’tal FilterT301 2580541Z02 Balun TransformerT302 2580541Z02 Balun TransformerU101 5185130C65 LDMOS DriverU102 5185765B26 PCICU201 5185963A27 LVFRACNU210 5102463J61 InverterU211 5102463J61 InverterU241 5105750U54 VCO BufferU247 5105739X05 5V RegulatorU248 5102463J58 3.3V RegulatorU301 5109632D83 LVZIFVR300 NOT PLACEDVR439 4880140L17 12V Zener DiodeVR440 4802245J73 6.8V Zener DiodeVR441 4802245J73 6.8V Zener DiodeVR443 4802245J73 6.8V Zener DiodeVR444 4802245J73 6.8V Zener DiodeVR501 4813830A18 6.8V DiodeVR506 4802245J73 6.8V Zener DiodeY201 NOT PLACED
8404102G03 RF PCB8404102G04 RF PCB8404102G05 RF PCB8404102G07 RF PCB
CircuitRef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
5C-30 Circuit Board/Schematic Diagrams and Parts List
.net
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
Troubleshooting charts 5C-31
9.0 Troubleshooting charts
MCU Check
Power UpAlert Tone
OK?
SpeakerOK?
U409 EXTAL=7.3728 MHz?
U201 Pin 1916.8 MHz
5V at U247?3.3V at U248?
U409 Reset Pin94 High?
MCU is OK
Not able to pro-gram RF Board
ICs
Before replacingMCU, check SPI
clock, SPI data, andRF IC select
Replace Speaker
Read Radio OK?CheckSetup
Reprogram thecorrect data.
See FGUTroubleshooting
7.5V atPin 3/5 U247? 4/
3.3V at Pin 1U248
CheckQ400
Replace U247/U248
Check any short toSWB+,
Vdda or Vddd
Press PTT. RedLED does not
light up
PTT U409 Pin53
low?
Press PTTQ502-2 High?
CheckPB504
CheckQ502-2voltage
LEDQ502,R501
OK?
ReplaceFaulty
Component
CheckAccessories
J403 OPT_SEL_1& OPT_SEL_2
Pin 8 & 9low?
Radio couldnot PTT
externally
U409Pin 52, 6
low?
See FGUTroubleshooting
chart
LED shouldlight up
CheckMCU
PTT
NO
YES
YES
No
No
NO
YES YES
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
YES
YES
NO
NO
YES
EXTSPKR
EXTPTT
INTAUDIO
J403 Pin 9 low?Pin 8 high?
ASFIC U404 Pin14 & 15 high?
CheckAccessories
CheckU404
CheckU420 Audio PA
NO
NO
YES
YES
J403 Audioat Pin 2 &
Pin 3
Check Spk. FlexConnection
Audio atAudioPA(U420)input
(U447)
Audio from Pin 41ASFIC, U404?
Check ASFICU404
CheckAudio PA(U420)
Check U301LV ZIF
Audio atPin 2
U404?
NO
NO
NO
YES
YES
NO
YES
Troubleshooting Flow Chart for Controller
http:/
/www.m
yrad
io168
.net
5C-32 Troubleshooting charts
Bad SINADBad 20dB Quieting
No Recovered Audio
START
Audio at pin 27of U301?
Check ControllerYes
No
Spray of inject 1st IF intoXTAL Filter
IF Freq: 45.1MHz
Audio heard?BYes
No
Check 2nd LO ControlVoltage at C363
VCO locked?BYes
16.8 MHzcheck at pin 22
U301?
Activity onU301 sel pin?
Check FGU
No
No
A
A
Yes
Check Q320 bias cir-cuitry for faults.
Rotate Freq. Knob
Check controller.
Before replacing U301, check 2nd VCOQ320. Check VCO O/P level, C351,
C352.
Yes
No
Troubleshooting Flow Chart for Receiver (Sheet 1 of 2)
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5C-33
IF Signal atL311?
No
RF Signal atT301?
RF Signal atC310?
No
RF Signal atC307?
No
RF Signal atC301?
No or
Check harmonic filters L101 & L102 and ant.switches CR101, CR102, L104
Check filter between C301& C307; program filter to
schematic test freq andcheck varactor voltages.
Inject RF into J101
Are varactorvoltages OK?
No
Yes
Check RF amp (Q301)Stage.
Check filter betweenC310 & T301.
Yes
Check T301, T302, CR306,R308, R309, R310
Yes
1st LO O/POK?
Locked?
Yes
Check FGU
Yes
Trace IF signalfrom L311 to
Q302. Check forbad XTAL filter.
No
Yes Q302 collectorOK?
IF signalpresent?
Before replacingU301, check
U301 voltages;trace IF signal
path.
Yes
Check for 2.6VDC
Is R5 present?
Check Q210, U201(pin 48) voltages and
U247
No
No
No
Check U404 voltage. U404can be selected by MCUbefore replacing U404.
Check varactor filter.
No
Yes
Yes
Yes
A
A
B
weak RF
Troubleshooting Flow Chart for Receiver (Sheet 2 of 2)
http:/
/www.m
yrad
io168
.net
5C-34 Troubleshooting charts
START
No Power
Is There B+Bias for Ant
switch
Check Q111
Is CurrentOK?
Is Control VoltageHigh or Low
Check PCIC
1. Check Pin Diodes2. Check Harmonic Filter
Inspect/Repair Tx. Out-put Network
Is PowerOK?
Done
Check Drive toModule
Is DriveOK? Troubleshoot
VCO
Inspect PA Network/CheckPower Out of U101 at Cap
C160
Is PowerOK?
Replace U101
Is PowerOK?
Replace Q101
Done
Done
No
Yes
Yes No
No
Yes
Low
High
No
Yes
Yes
No
Yes
No
Troubleshooting Flow Chart for Transmitter
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5C-35
5Vat pin 6 ofCR201
Is informationfrom µP U409
correct?
Is U201 Pin 18AT 4.54 VDC?
Is U201 Pin 47AT = 13 VDC
Is U241 Pin 19<0.7 VDC in RX &>4.3 VDC in TX?
Start
Visualcheck of theBoard OK?
CorrectProblem
Check 5VRegulator
+5V at U201Pin’s
13 & 30?
Is 16.8MHzSignal at
U201 Pin 19?
Check FL201, C206,C207, C208, CR203 &
R204
Are signalsat Pin’s 14 &15 of U201?
CheckL202 Check Q260,
Q261 & R260
U201 pin 2 at>3V in Tx and<0.7V in Rx
Replace U201
RemoveShorts
Is there a shortbetween Pin 47 and
Pins 14 & 15 ofU201?
Replace orresolder
necessarycomponents
Is RF level atU201 Pin 32>-30 dBm?
Are R231,R232,R233,C231,C232,
& C233 OK?
Replace U201
If L261, C263 & C264are OK, then see VCOtroubleshooting chart
Are Waveformsat Pins 14 & 15
triangular?
Do Pins 7,8 & 9of U201 togglewhen channel is
changed?
Check programminglines between U409
and U201 Pins 7,8 & 9
Replace U201
Check uP U409Troubleshooting
Chart
NO
YES
NO
YES
NO
YES
NO
YES
NO
NO
NO
YES
YES
NO
YES
YES
NO
YES
YES
YES
NO
NO
NO
NO
YES
NO
YES
YES
Check CR201, U210,U211, C258, C259 &
C228
3.3V at U201pins 5, 20, 34 &
36
Check U248,L201 & L202
Is16.8MHzsignal atU201 pin
23?
ReplaceU201
YES
NO
NO
YES
NO
YES
Troubleshooting Flow Chart for Synthesizer
http:/
/www.m
yrad
io168
.net
5C-36 Troubleshooting charts
START
No LO?
Tx Carrier?
VCO OK
CheckR260
TRB = 5V?Pin 10>1V?
L253 O/C?ChangeL253
ChangeU241
AUX 3High?
Check U201Pin 2 for 3.2V
Pin 19 =0V
AUX 4High?
ChangeQ261
V ctrl 0Vor 13V?
L243 OpenCircuit?
ChangeU241
ChangeL243
ChangeU201
Check for faulty parts or dryjoints of L271, L273, C370,
C386, R339 & L320
A
A
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
Check R245 for dryjoint or faulty
No
Troubleshooting Flow Chart for VCO
http:/
/www.m
yrad
io168
.net
5D-1
Section 5D
MODEL CHART AND TEST SPECIFICATIONS (330-400MHZ)
1.0 Model Chart
GP Series, 330-400 MHzModel Description
AZH38PDC9AA3 GP328 Plus 330-400 MHz 4W 16 CH
AZH38PDH9AA6 GP338 Plus 330-400 MHz 4W 128 CH
Item Description
X PMUD1675 GP328 Plus Super Tanapa 330-400 MHz 4W
X PMUD1676 GP338 Plus Super Tanapa 330-400 MHz 4W 128CH
X PMUD1679 GP328 Plus Tanapa 330-400 MHz 4W
X PMUD1680 GP338 Plus Tanapa 330-400 MHz 4W 128CH
X JMHD4007 GP328 Plus B/C Kit 330-400 MHz 4W
X PMHD4007 GP338 Plus B/C Kit 330-400 MHz 4W 128CH
X PMHD4002 GP328 Plus Front Housing Kit
X PMHD4003 GP338 Plus Front Housing Kit
X X PMAD4009 VHF 9 cm antenna (336-368 MHz)
X X PMAD4020 VHF 9 cm antenna (370-400 MHz)
X 6804022G48 GP328 Plus User Guide
X 6804112J64 GP338 Plus User Guide
x = Indicates one of each is required.
http:/
/www.m
yrad
io168
.net
5D-2 Specifications (for GP328 Plus)
2.0 Specifications (for GP328Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
330-400MHz
Frequency: 330-400 MHz
Channel Capacity: GP328 Plus : 16 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x30.5mm
101.5mm x 55.5mm x35.5mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
250 g
270 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
330-400MHz
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 330-400 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
12.5kHz 20/25kHz
Frequency: 330-400MHz
330-400MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
Specifications (for GP338 Plus) 5D-3
3.0 Specifications (for GP338Plus)General
Transmitter
Receiver
All specifications are subject to change without notice.
330-400MHz
Frequency: 330-400 MHz
Channel Capacity: GP338 Plus : 128 Chan-nels
Power Supply: 7.5 Volts ±20%
Dimensionswith Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
101.5mm x 55.5mm x33.0mm
101.5mm x 55.5mm x38.0mm
Weight:with Standard
High CapacityLithium Battery:
with Ultra HighCapacity LithiumBattery:
250 g
270 g
Average BatteryLife @ (5-5-90 DutyCycle)
Standard HighCapacity LithiumBattery:
Ultra High Capac-ity Lithium Battery:
LowPower
>10 hrs
>14 hrs
HighPower
>8 hrs
>11 hrs
Sealing: Meets MIL-STD-810-C,D & E and IPX4
Shock: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Vibration: Meets MIL-STD-810-C,D & E and TIA/EIA 603
Dust: Meets MIL-STD-810-C,D & E and IP5X
Humidity: 50°C; 90%-95%
330-400MHz
RF OutputLi Ion @ 7.5V:
Low1W
High4W
Frequency 330-400 MHz
Channel Spacing 12.5/20/25 kHz
Freq. Stability(-30°C to +60°C)
0.00025%
Spurs/Harmonics: -36 dBm < 1 GHz-30 dBm > 1 GHz
Audio Response:(from 6 dB/oct. Pre-Emphasis, 300 to3000Hz)
+1, -3 dB
Audio Distortion:@ 1000 Hz, 60%Rated Max. Dev.
<5%
FM Noise: -40 dB
12.5kHz 20/25kHz
Frequency: 330-400MHz
330-400MHz
Sensitivity12dB EIA SINAD:
0.35 mV 0.35 mV
Adjacent ChannelSelectivity ETS
-60 dB -70 dB
IntermodulationETS
-65 dB -65 dB
Freq. Stability(-30°C to +60°C):
0.00025% 0.00025%
Spur Rejection: -70 dB -70 dB
Image Rejection: -70 dB -70 dB
Audio Output@ <5% Distortion
500 mW 500 mWhtt
p://w
ww.myr
adio1
68.ne
t
5D-4 Transmitter
4.0 Transmitter
4.1 General(Refer to Figure 5-1)
The transmitter contains five basic circuits:
1. Power Amplifier
2. Antenna Switch
3. Harmonic Filter
4. Antenna Matching Network
5. Power Control Integrated Circuit (PCIC).
4.1.1 Power Amplifier
The power amplifier consists of two devices:
1. 9Z67 LDMOS driver IC (U101) and
2. PRF1507 LDMOS PA (Q110).
The 9Z67 LDMOS driver IC contains a 2 stage amplification with a supply voltage of 7.3V.
This RF power amplifier is capable of supplying an output power of 0.3W (pin 6 and 7) with an inputsignal of 2mW (3dBm) (pin16). The current drain would typically be 160mA while operating in thefrequency range of 330-400MHz.
The PRF1507 LDMOS PA is capable of supplying an output power of 7W with an input signal of0.3W. The current drain would typically be 1300mA while operating in the frequency range of 330-400MHz. The power output can be varied by changing the biasing voltage.
Figure 5-1: Transmitter Block Diagram
PCIC
Antenna
P ADriver
Vcontrol Vcontrol
From VCO
Jack
PA-FinalStage
Antenna Switch/Harmonic Filter/
Matching Network
http:/
/www.m
yrad
io168
.net
Transmitter 5D-5
4.1.2 Antenna Switch
The antenna switch circuit consists of two PIN diodes (CR101 and CR102), a pi network (C107, L104and C106), and two current limiting resistors (R101, R170). In the transmit mode, B+ at PCIC (U102)pin 23 will go low and turn on Q111 where a B+ bias is applied to the antenna switch circuit to bias thediodes "on". The shunt diode (CR102) shorts out the receiver port, and the pi network, whichoperates as a quarter wave transmission line, transforms the low impedance of the shunt diode to ahigh impedance at the input of the harmonic filter. In the receive mode, the diodes are both off, andhence, there exists a low attenuation path between the antenna and receiver ports.
4.1.3 Harmonic Filter
The harmonic filter consists of C104, L102, C103, L101 and C102. The design of the harmonic filterfor VHF is that of a modified Zolotarev design. It has been optimized for efficiency of the powermodule. This type of filter has the advantage that it can give a greater attenuation in the stop-band fora given ripple level. The harmonic filter insertion loss is typically less than 1.2dB.
4.1.4 Antenna Matching Network
A matching network which is made up of L116 is used to match the antenna's impedance to theharmonic filter. This will optimize the performance of the transmitter and receiver into an antenna.
4.1.5 Power Control Integrated Circuit (PCIC)
The transmitter uses the Power Control IC (PCIC), U102 to regulate the power output of the radio.The current to the final stage of the power module is supplied through R101, which provides a voltageproportional to the current drain. This voltage is then fedback to the Automatic Level Control (ALC)within the PCIC to regulate the output power of the transmitter.
The PCIC has internal digital to analog converters (DACs) which provide the reference voltage of thecontrol loop. The reference voltage level is programmable through the SPI line of the PCIC.
There are resistors and integrators within the PCIC, and external capacitors (C133, C134 and C135)in controlling the transmitter rising and falling time. These are necessary in reducing the powersplatter into adjacent channels.
CR105 and its associated components are part of the temperature cut back circuitry. It senses theprinted circuit board temperature around the transmitter circuits and output a DC voltage to the PCIC.If the DC voltage produced exceeds the set threshold in the PCIC, the transmitter output power will bereduced so as to reduce the transmitter temperature.
http:/
/www.m
yrad
io168
.net
5D-6 Receiver
5.0 Receiver
5.1 Receiver Front-End(Refer to 330-400MHz Receiver Front End Schematic Diagram on page 5D-22 and 330-400MHzTransmitter Schematic Diagram on page 5D-26)
The RF signal is received by the antenna and applied to a low-pass filter. For VHF, the filter consistsof L101, L102, C102, C103, C104. The filtered RF signal is passed through the antenna switch. Theantenna switch circuit consists of two PIN diodes(CR101 and CR102) and a pi network (C106, L104and C107).The signal is then applied to a varactor tuned bandpass filter. The VHF bandpass filtercomprises of L301, L302, C302, C303, C304, CR301 and CR302. The bandpass filter is tuned byapplying a control voltage to the varactor diodes(CR301 and CR302) in the filter.
The bandpass filter is electronically tuned by the DACRx from U404 which is controlled by themicroprocessor. Depending on the carrier frequency, the DACRx will supply the tuned voltage to thevaractor diodes in the filter. Wideband operation of the filter is achieved by shifting the bandpass filteracross the band.
The output of the bandpass filter is coupled to the RF amplifier transistor Q301 via C307. After beingamplified by the RF amplifier, the RF signal is further filtered by a second varactor tuned bandpassfilter, consisting of L306, L307, C313, C317, CR304 and CR305.
Both the pre and post-RF amplifier varactor tuned filters have similar responses. The 3 dB bandwidthof the filter is about 50 MHz. This enables the filters to be electronically controlled by using a singlecontrol voltage which is DACRx .
Figure 5-2: Receiver Block Diagram
Demodulator
Synthesizer
CrystalFilter
MixerVaractorTuned Filter
RF AmpVaractorTuned Filter
Pin DiodeAntennaSwitchRF Jack
Antenna
AGC
Control Voltagefrom ASFIC
First LOfrom FGU
Recovered AudioSquelch
RSSI
IF IC
SPI Bus
16.8 MHzReference Clock
SecondLO VCO
U301
IF Amp
http:/
/www.m
yrad
io168
.net
Receiver 5D-7
The output of the post-RF amplifier filter which is connected to the passive double balanced mixerconsists of T301, T302 and CR306. Matching of the filter to the mixer is provided by C381. Aftermixing with the first LO signal from the voltage controlled oscillator (VCO) using low side injection, theRF signal is down-converted to the 45.1 MHz IF signal.
The IF signal coming out of the mixer is transfered to the crystal filter (FL301) through a resistor padand a diplexer (C322 and L310). Matching to the input of the crystal filter is provided by C324 andL311. The crystal filter provides the necessary selectivity and intermodulation protection.
5.2 Receiver Back-End(Refer to 330-400MHz Receiver Back End Schematic Diagram on page 5D-23)
The output of crystal filter FL301 is matched to the input of IF amplifier transistor Q302 bycomponents R352 and C325. Voltage supply to the IF amplifier is taken from the receive 5 volts (R5).The IF amplifer provides a gain of about 7dB. The amplified IF signal is then coupled into U301(pin 3)via C330, C338 and L330 which provides the matching for the IF amplifier and U301.
The IF signal applied to pin 3 of U301 is amplified, down-converted, filtered, and demodulated, toproduce the recovered audio at pin 27 of U301. This IF IC is electronically programmable, and theamount of filtering (which is dependent on the radio channel spacing) is controlled by themicroprocessor. Additional filtering, once externally provided by the conventional ceramic filters, isreplaced by internal filters in the IF module (U301).
The IF IC uses a type of direct conversion process, whereby the externally generated second LOfrequency is divided by two in U301 so that it is very close to the first IF frequency. The IF IC (U301)synthesizes the second LO and phase-locks the VCO to track the first IF frequency. The second LOis designed to oscillate at twice the first IF frequency because of the divide-by-two function in the IFIC.
In the absence of an IF signal, the VCO will “search” for a frequency, or its frequency will vary close totwice the IF frequency. When an IF signal is received, the VCO will lock onto the IF signal. Thesecond LO/VCO is a Colpitts oscillator built around transistor Q320. The VCO has a varactor diode,CR310, to adjust the VCO frequency. The control signal for the varactor is derived from a loop filterconsisting of C362, C363, C364, R320 and R321.
The IF IC (U301) also performs several other functions. It provides a received signal-strengthindicator (RSSI) and a squelch output. The RSSI is a dc voltage monitored by the microprocessor,and used as a peak indicator during the bench tuning of the receiver front-end varactor filter. TheRSSI voltage is also used to control the automatic gain control (AGC) circuit at the front-end.
The demodulated signal on pin 27 of U301 is also used for squelch control. The signal is routed toU404 (ASFIC) where squelch signal shaping and detection takes place. The demodulated audiosignal is also routed to U404 for processing before going to the audio amplifier for amplification.
http:/
/www.m
yrad
io168
.net
5D-8 Receiver
5.3 Automatic Gain Control Circuit(Refer to 330-400MHz Receiver Front End Schematic Diagram on page 5D-22)
The front end automatic gain control circuit is to provide automatic gain reduction of the front end RFamplifier via feedback. This action is necessary to prevent overloading of back end circuits. This isachieved by drawing some of the output power from the RF amplifier’s output. At high radiofrequencies, capacitor C331 provides the low impedance path to ground for this purpose. CR308 is aPIN diode used for switching the path on or off. A certain amount of forward biasing current is neededto turn the PIN diode on. Transistors Q315 provides this current where upon saturation, current willflow via R347, PIN diode, collector and emitter of Q315 and R319 before going to ground. Q315 is anNPN transistor used for switching here. Maximum current flowing through the PIN is mainly limited bythe resistor R319.
Radio signal strength indicator, RSSI, a voltage signal, is used to drive Q315 to saturation henceturning it on. RSSI is produced by U301 and is proportional to the gain of the RF amplifier and theinput RF signal power to the radio.
Resistor network at the input to the base of Q315 is scaled to turn on Q315, hence activating theAGC, at certain RSSI levels. In order to turn on Q315, the voltage across the transistor’s base toground must be greater or equal to the voltage across R319, plus the base-emitter voltage (Vbe)present at Q315. The resistor network with thermistor RT300 is capable of providing temperaturecompensation to the AGC circuit, as RSSI generated by U301 is lower at cold temperaturescompared to normal operation at room temperature. Resistor R300 and capacitor C397 form an R-Cnetwork used to dampen any transient instability while the AGC is turning on.
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5D-9
6.0 Frequency Generation Circuitry
The Frequency Generation Circuitry is composed of two main ICs, the Fractional-N synthesizer(U201), and the VCO/Buffer IC (U241). Designed in conjunction to maximize compatibility, the twoICs provide many of the functions that normally would require additional circuitry. The synthesizerblock diagram illustrates the interconnect and support circuitry used in the region. Refer to therelevant schematics for the reference designators.
The synthesizer is powered by regulated 5V and 3.3V which come from U247 and U248 respectively.The synthesizer in turn generates a superfiltered 4.5V which powers U241.
In addition to the VCO, the synthesizer must interface with the logic and ASFIC circuitry.Programming for the synthesizer is accomplished through the data , clock and chip select lines fromthe microprocessor. A 3.3V dc signal from synthesizer lock detect line indicates to the microprocessorthat the synthesizer is locked.
Transmit modulation from the ASFIC is supplied to pin10 of U201. Internally the audio is digitized bythe Fractional-N and applied to the loop divider to provide the low-port modulation. The audio runsthrough an internal attenuator for modulation balancing purposes before going out to the VCO.
Figure 5-3: Frequency Generation Unit Block Diagram
VoltageMultiplier
SynthesizerU201
DualTran-sistor
LoopFilter
VCOBICU241
LowPassFilter
MatchingNetwork
Attenuator
ToMixer
ToPA Driver
VCP
Vmult1Aux3
Aux4
MOD Out
ModulatingSignal
Vmult2
Rx VCO Circuit
Tx VCO Circuit
TRB
16.8 MHzRef. Osc.
Rx Out
Tx Out
http:/
/www.m
yrad
io168
.net
5D-10 Frequency Generation Circuitry
6.1 Synthesizer(Refer to 330-400MHz Synthesizer Schematic Diagram on page 5D-24)
The Fractional-N Synthesizer uses a 16.8MHz crystal (FL201) to provide a reference for the system.The LVFractN IC (U201) further divides this to 2.1MHz, 2.225MHz, and 2.4MHz as referencefrequencies. Together with C206, C207, C208, R204 and CR203 , they build up the referenceoscillator which is capable of 2.5ppm stability over temperatures of -30 to 85°C. It also provides16.8MHz at pin 19 of U201 to be used by ASFIC and LVZIF.
The loop filter which consist of C231, C232, C233, R231, R232 and R233 provides the necessary dcsteering voltage for the VCO and determines the amount of noise and spur passing through .
In achieving fast locking for the synthesizer, an internal adapt charge pump provides higher current atpin 45 of U201 to put synthesizer within the lock range. The required frequency is then locked bynormal mode charge pump at pin 43 .
Both the normal and adapt charge pumps get their supply from the capacitive voltage multiplier whichis made up of C258, C259, C228, triple diode CR201 and level shifters U210 and U211. Two 3.3Vsquare waves ( 180 deg out of phase) are first shifted to 5V, then along with regulated 5V , putthrough arrays of diodes and capacitors to build up 13.3V at pin 47 of U201.
Figure 5-4: Synthesizer Block Diagram
DATA
CLK
CEX
MODIN
VCC, DC5V
XTAL1
XTAL2
WARP
PREIN
VCP
REFERENCEOSCILLATOR
VOLTAGEMULTIPLIER
VOLTAGECONTROLLEDOSCILLATOR
2-POLELOOPFILTER
DATA (U409 PIN 100)
CLOCK (U409 PIN 1)
CSX (U409 PIN 2)
MOD IN (U404 PIN 40)
+5V (U247 PIN 4)
7
8
9
10
13, 30
23
24
25
32
47
VMULT2 VMULT1
BIAS1
SFOUT
AUX3
AUX4
IADAPTIOUT
GND
FREFOUT
LOCK 4
19
6, 22, 23, 24
4345
3
2
28
14 15
40
FILTERED 5V
STEERINGLINE
LOCK (U409 PIN 56)
PRESCALER IN
LO RF INJECTION
TX RF INJECTION(1ST STAGE OF PA)
FREF (U201 PIN 21 & U404 PIN 34)
39BIAS2
41
DUALTRANSIS
DUALTRANSIS-
48
5VR5
5, 20, 34, 36(U248 PIN 5)
AUX1
VDD, 3.3V MODOUT
U251LOW VOLTAGEFRACTIONAL-NSYNTHESIZER
TORS
TORS
http:/
/www.m
yrad
io168
.net
Frequency Generation Circuitry 5D-11
6.2 VCO - Voltage Controlled Oscillator(Refer to 330-400MHz Voltage Controlled Oscillator Schematic Diagram on page 5D-25)
Figure 5-5: VCO Block Diagram
The VCOBIC (U241) in conjunction with the Fractional-N synthesizer (U201) generates RF in boththe receive and the transmit modes of operation. The TRB line (U241 pin 19) determines whichoscillator and buffer will be enabled. A sample of the RF signal from the enabled oscillator is routedfrom U241 pin 12, through a low pass filter, to the prescaler input (U201 pin 32). After frequencycomparison in the synthesizer, a resultant CONTROL VOLTAGE is received at the VCO. This voltageis a DC voltage between 3.5V and 9.5V when the PLL is locked on frequency.
Presc
RX
TX
MatchingNetwork
Low PassFilter
Attenuator
Pin8
Pin14
Pin10
Level ShifterNetwork
5V
(U201 Pin28)
VCC Buffers
TX RF Injection
U201 Pin 32
AUX4 (U201 Pin3)
AUX3 (U201 Pin2)
Prescaler Out
Pin 12Pin 19Pin 20
TX/RX/BSSwitching Network
U241VCOBIC
RxActive Bias
TxActive Bias
Pin2
Rx-I adjust
Pin1
Tx-I adjust
Pins 9,11,17Pin18
VsensCircuit
Pin15
Pin16
RX VCOCircuit
TX VCOCircuit
RX Tank
TX Tank
Pin7
Vcc-Superfilter
Collector/RF in
Pin4
Pin5
Pin6
RX
TX
(U201 Pin28)
Rx-SW
Tx-SW
Vcc-Logic
(U201 Pin28)
Steer LineVoltage(VCTRL)
Pin13
Pin3
TRB_IN
LO RF INJECTION
VSF
VSF
VSF
http:/
/www.m
yrad
io168
.net
5D-12 Frequency Generation Circuitry
The VCOBIC(U241) is operated at 4.54 V (VSF) and Fractional-N synthesizer (U201) at 3.3V. Thisdifference in operating voltage requires a level shifter consisting of Q260 and Q261 on the TRB line.
The operation logic is shown in Table 5-1.
In the receive mode, U241 pin 19 is low or grounded. This activates the receive VCO by enabling thereceive oscillator and the receive buffer of U241. The RF signal at U241 pin 8 is run through amatching network. The resulting RF signal is the LO RF INJECTION and it is applied to the mixer atT302 (refer to 330-400MHz Receiver Front End Schematic Diagram on page 5D-22).
During the transmit condition, when PTT is depressed, five volts is applied to U241 pin 19. Thisactivates the transmit VCO by enabling the transmit oscillator and the transmit buffer of U241. The RFsignal at U241 pin 10 is injected into the input of the PA module (U101 pin16). This RF signal is theTX RF INJECTION. Also in transmit mode, the audio signal to be frequency modulated onto thecarrier is received through the U201 pin 41.
When a high impedance is applied to U241 pin19, the VCO is operating in BATTERY SAVER mode.In this case, both the receive and transmit oscillators as well as the receive transmit and prescalerbuffer are turned off.
Table 5-1: Level Shifter Logic
DesiredMode AUX 4 AUX 3 TRB
Tx Low High (@3.2V) High (@4.8V)
Rx High Low Low
Battery Saver Low Low Hi-Z/Float (@2.5V)
http:/
/www.m
yrad
io168
.net
Notes For All Schematics and Circuit Boards 5D-13
7.0 Notes For All Schematics and Circuit Boards* Component is frequency sensitive. Refer to the Electrical Parts List for value and usage.
1. Unless otherwise stated, resistances are in Ohms (k = 1000), and capacitances are in picofarads(pF) or microfarads (µF).
2. DC voltages are measured from point indicated to chassis ground using a Motorola DC multime-ter or equivalent. Transmitter measurements should be made with a 1.2 µH choke in series withthe voltage probe to prevent circuit loading.
3. Reference Designators are assigned in the following manner:
100 Series = Transmitter
200 Series = Frequency Generation
300 Series = Receiver
400/500 Series = Controller
600 Series = Keypad Board
4. Interconnect Tie Point Legend:
UNSWB+ = Unswitch Battery Voltage (7.5V)
SWB+ = Switch Battery Voltage (7.5V)
R5 = Receiver Five Volts
CLK = Clock
Vdda = Regulated 3.3 Volts (for analog)
Vddd = Regulated 3.3 Volts (for digital)
CSX = Chip Select Line (not for LVZIF)
SYN = Synthesizer
DACRX = Digital to Analog Voltage (For Receiver Front End Filter)
VSF = Voltage Super Filtered (5 volts)
VR = Voltage Regulator
6-LAYER CIRCUIT BOARD DETAIL VIEWINGCOPPER STEPS IN PROPER LAYER SEQUENCE
LAYER 1 (L1)
LAYER 2 (L2)LAYER 3 (L3)LAYER 4 (L4)
LAYER 5 (L5)LAYER 6 (L6)
INNER LAYERS
SIDE 1
SIDE 2
http:/
/www.m
yrad
io168
.net
5D-14 Notes For All Schematics and Circuit Boards
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
.net
Circu 5D-15
8.0
C10
1
C102
C10
4
C10
3
C106
C107 C188
CR
101
CR102
L101
L102L104
L105
SH100
C304
C30
8
C301
C30
2C
305
C30
3
CR301
CR302
L301
L302
R301R302
SH301
C35
4
62
352
C350
C353
C363
C384
C385
CR
310
L325 L332
PB504
Q320R355
R32
2
R34
5
R32
4
R34
6
SH321
VR444
C50
5
C512 C513
C50
2
Q505
Q502
R506
R50
7
R505
VR501
C140
C51
1C
514
C520
CR5032
3 4
L116
PB
505
R50
2
R501VR443
C141
330-400MHz Main Board Top Side PCB No. 8404101G02/G03/G04
.net
it Board/Schematic Diagrams and Parts List
Circuit Board/Schematic Diagrams and Parts List
B50
3
B50
4
C21
6
FL2
01
1 346
40
J200
1
TP201
C247C251
C28
5
C28
9
C37
0
C37
4
C38
6
C248C273
C28
6
C27
6
C253
C27
1
C27
2
L282
3
L243
1
3
L253
1
L271
L273
L321
Q26
1 34
Q241
R33
3
R33
9
R24
3
R248
R25
3
R26
0
SH241
TP202
TP302
C21
0
C211
C21
2
C213
C21
4
C220
C23
0
C257
C260
C29
4C292
C22
9C
282 C28
3
C203
C21
7
C23
5
C22
8
C23
3
C238
C29
7
C29
1
CR
201
L201
L202
L203
L232
Q210
34
Q26
0
34
R206
R256
R255
SH201
U247
C328
C32
4
C325
C52
1
C32
3
C39
1
C397
FL3
01
L311
PB501PB502
Q315
Q316
R32
6
R300
R314
R31
6
R318
R31
9
R325
R32
7
R33
4
R335R338
R35
1
R352
RT
300
RT301
SH323
VR
300
VR
440
C37
5
C32
0C31
9
C32
2
C38
1
L309
L310R308
R310
R30
9
R348
SH303
T30
13 4
6T30
234
616
C109
C11
0
C11
4
C119
C12
2 C166
C171
C111
C112
C11
3
C115
C116
C117
C11
8
C121
C12
5
C160
C16
5
C12
0
C16
1
C19
3
C127
C131C129
C16
9
C18
0
C18
1
L115
L106
L107
L108
L109
L113
L114
L117L160
3
2
Q110
1
R10
4
R10
6
R10
7
R174R108
R12
0
R17
1R16
1
R19
3R173
SH101
U101
9
81
C33
1
C396
C333
CR
308
R34
2
R317
R336
C3
C351 C36
4
CC349
R32
0
R321
http:/
/www.m
yrad
io168
5D-16 Circuit Board/Schematic Diagrams and Parts List
B50
1
CR501
L112
133
C13
4
R109
32
R13
6
C24
1
C246
C25
5
C28
1
C29
5
C372 C371
C373
C37
8
C24
2
C250C243
C24
4
C245C254 C252
C256
CR241
CR242
CR243
CR
251
CR
252
L241
L242
L281
L251
M300
Q310
R330
R33
2R
254
R11
0R
112
R11
1
R241
R25
2R242
R24
4
R24
5 R25
1
R331
R349
SH242
U24
1
10
201
11
C20
1
C264
C21
8
C223
C224
C23
1
C29
6
C29
8C
202
C265
C204
C20
6
C20
7
C208
C219
C232
C234 C25
8
C25
9
C263
C29
3 CR203L261
R204
R281R201
R202
R23
1R
232
R23
3
SH202
13
2537
1
U201 U210
34
U211
3 4C277
C215
C27
9
C522
C278
L505
M101
R20
5U248
VR
441
VR
442
VR506
C523
Y20
1
43
2
C526C528C530C532C534C536C538C540C542
C547
C552
C555R509
R510
C525C527C529C531C533C535C537C539C541C543C544C545C546
C548C549
C550
C551C553
R51
1
330-40
.net
2S502
3 5
4
4C
8C
S50
1
2
C10
8
CR160
1
J101
4
3
2
J102
P100
C13
2
C17
3C172
CR
103
CR105
H10
1
M100
Q111
34
R101
R17
0
R13
3
R172
C309
C315
C32
1
C39
5
C30
7
C310
C31
4 C306C31
1
C380
C31
2
C318
C313
C31
7
C316
CR
304
CR
305
CR
303 L340
L304
L306 L307L3
03
L305Q30
1
R30
6R
307
R30
4R303 R
347
R30
5
R32
8R
340
SH302
C33
7
C383C390
C32
9 C33
6
C344
C34
5
C346
C34
7
C34
8
C33
4
C35
6
C33
9
C34
0
C34
1
C34
2
C343
C357
C360
C35
5
C358
C359
C361
C38
2
L314
L331
R34
3
R350R344
SH322
132537 1
U30
1
M301
32
1
C32
7
C503
C338
C32
6
C33
0
L330
Q30
2R
315
R311R312R
313
C130
C138C151
C170
C123
C12
6
C128
C150C152
CR306
E101
F50
1
R10
2R
329
SH304
VR
439
C10
5
C17
4
C
C13
5
R130
R131R1
25
9
17
U10
2
10MHz Main Board Bottom Side PCB No. 8404101G02/G03/G04
http:/
/www.m
yrad
io168
Circu 5D-17
ZMY0131018
C101
C102
C104
C103
C106
C107
C188
CR101
CR102
L101L102
L104
L105
SH100
C308
C301
C302
C305
C303
C304
CR301
CR302
L301
L302
R301R302
SH301
C140
C141
L116
PB505
C511
C512 C513
C514
C520
CR5032
3 4
Q505
Q502
R505
R502
R501VR443
C505
C502
R506
R507
VR501
PB504
VR444
C350
2C353
C354
C363
C384C385
CR310
L325
L332
Q320
R322
R345R324
55
R346
SH321
330-400MHz Main Board Top Side PCB No. 8404101G06
.net
it Board/Schematic Diagrams and Parts List
40
J200
1
B503
C216
C282 C283
C210
C211
C212
C213C214
C220
C230
C257
C260
C294
C292
C229
C203
C217
C235
C228
C233
C297
C291
CR201
FL201
1 3
46
L201
L202
L203
Q210
34
Q260
34
R206
R256
R255
SH201
TP201
C238
L232
U247
B504
TP202
TP302
C391
C328
C324
C325
C521
C323
C397
FL301
L311
PB501PB502
Q315
Q316
R326
R334
R335R338
R300
R314
R316
R318
R319R325
R327
R351
R352
RT300
RT301
SH323
VR300
VR440
C381
C375
R310
C319 C320
C322
L309
L310R308
R309
R348
SH303
T301
3 4
6T302
34
6
C333C396
C331
CR308R336
R342
R317
C247C251
C285
C289
C370
C374C386
C248 C273
C286C253
C276
C271C272
L282
3
L243
1
3
L253
1
L271
L273
L321
Q26134
Q241
R333
R243
R248
R253
R260
R339
SH241
C109C110
C114
C119
C122
C166
C171
C111
C112
C113
C115C116
C180
C117
C118
C121
C125
C160
C165
C120
C161
C193
C127
C131C129
C169
C181L115
L106
L107
L108
L109
L113
L114
L117L160
3
2
Q110
1R104
R174
R106
R107
R108
R120
R171R161
R193
R173
R175
R176
SH101
1
16
8
9
U101
C362
C351
C364
C35
C349
R320
R321
R3
http:/
/www.m
yrad
io168
5D-18 Circuit Board/Schematic Diagrams and Parts List
ZMY0131019-O
C539 C540C541 C542C543
C548
C525 C526C527 C528C529 C530C531 C532C533 C534C535 C536C537 C538
C544C545C546 C547
C549
C550
C551 C552C553
C555R509
R511R510
C215
C277
C279
C522
C278
L505
R205U248
VR441VR506
SH202
Y201
4
3
2
C208
CR203C263C264 C
298
C202
C204L261
R204
C201
C223
C231
C219
C232
C234
C293
R201R202
R231R232
R233
13
2537
1
U201 C265
C218 C206
C207
R281
U21034
C296 C258
C259
U211
3 41
C224
L251
C255C254 C252
C256
CR251
CR252
R254
R252
R251
C371C372
C373C378
C241
C246
C281
C295
C242
C250C243
C244
C245
CR241
CR242
CR243
L241
L242 L281
Q310
R330R331
R332R110
R112
R111
R241R242
R244
R245
R349
SH242
U241
10
201
11
330-40
.net
2S502
3 5
4
4
C
8
CS501
2
J1014
3
21
J102
C108
CR103
CR160
Q11134
R101R170
P100
C132
C173
C172
CR105
H101
R133
R172
R130R131
C311C309
C315
C321
C395
C307
C310
C314
C306 C380
C312
C318
C316C313
C317
CR304 CR305
CR303
L340
L304
L306 L307L303
L305
Q301
R306
R307
R304
R303 R347
R305
R328
R340
SH302
C329
C336
C344
C360
C355
C361
C382
L314
L331
R343
R350
C337
C345
C347
C348
C334
C356
C341
C342
C358
C359
R3441325
37 1
U301C383C390
C346
C339
C340
C343
C357
SH322
C327
C338
C326
C330
L330
Q302
R315
R311R312
R313
1
2
3
B501
C503
CR306
CR50
F501
SH304
C123E101
R329
VR439
C130
C138C151
C170
C126
C128
C150 C152L112R102
C105
C174
C133
C135
C134
R109
R132
R136
25
917
U102
1
0MHz Main Board Bottom Side PCB No. 8404101G06
http:/
/www.m
yrad
io168
Circu 5D-19
J200-33
J200
J200-29J200-30
J200-15
J200-24
J200-3
J200-25
J200-31
J200-10J200-11J200-12
J200-19
J200-38
J200-22
J200-26
J200-28
J200-37
J200-23
J200-21
J200-27
J200-13
J200-20
J200-4
J200-14
J200-6J200-5
J200-7J200-8
J200-39
J200-1
J200-16
J200-2
J200-18J200-17
J200-36
J200-40
J200-32
J200-9
J200-35J200-34
C527100pF
C526100pF
C525100pF100pF 100pF
C530 C528100pF
C529100pFC531
C544100pF
C545100pF
C543NU NU
C542NU NU
C541NU
C540 C539
0-400MHz Controls And Switches Schematic Diagram (sheet 1 of 2)
.net
it Board/Schematic Diagrams and Parts List
ZMY0130798-O
RF
RTA2
RTA3
SB1
SB2
SB3
SWB+
UNSWB+
VOL
Vdda
DATA
DEMOD
DUMMY
EMER
GREEN_LED
LI_ION
LOCK
LVZIF_SEL
MECH_SWB+
MODIN
PTT
RED_LED
RESET
RSSI
RTA0
RTA1
16.8MHz
5V
BATT_CODE
CLK
CSX
DACRX
Vdda
VOL
UNSWB+
SWB+
SB3
SB2
SB1
RTA3
RTA1
RTA0
RSSI
RESET
RED_LED
PTT
MODIN
MECH_SWB+
LVZIF_SEL
LOCK
LI_ION
GREEN_LED
EMER
DEMOD
DATA
DACRX
CSX
CLK
BATT_CODE
5V
16.8MHz
RTA2
LVZIF_SEL
CLK
PTT
LI_ION
CSX
RTA1RTA0
MECH_SWB+GREEN_LED
RED_LEDVOL
EMERSB3SB2
RTA3
BATT_CODE
RTA2
Vdda
DACRX
DATA
SWB+
SWB+
MODIN
SB1
RSSI
16.8MHz
UNSWB+
LOCK
5V
DEMOD
RESET
C532100pF
C535100pF
C534100pF
C533100pF
C537100pF
C536100pF100pF
C538
R509NU
100pFC555
R5100
NUR511
C546100pF
C552100pF
C551100pF
C550100pF
C549100pF
C548NU
C547100pF
C553100pF
33
http:/
/www.m
yrad
io168
5D-20 Circuit Board/Schematic Diagrams and Parts List
ATT+
BATTERY_CONTACT
BATT-
ITCHB505
2B1
4B2
L505390nH
CONN_J
B501
2DATA
1NEG
3POS
RADIO_CODE
330-40
.net
NU
B
NU
Q502NU
DUMMY
P100
16.28nHL116
47KR506
VR506
6.8V
SWP
1 A1
3 A2
C1418.2pF
NU
24V
21
C140
F501
GND1
PC01
PC12
PC24 8PC3
SWITCH
S501
C0C0
C1 C1
GND
7 9
R501680
R502180
Q505
C502
0.47uF
VR5016.8V
4
LOW
1
5
HIG
H
3
6TAB1
7TAB2
2
SWITCHS502
100pFC511
100pFC512
1 A1
3 A2
2B1
4B2
SWITCHPB501
10KR505
IMX1
5
1
6
6.8V
VR443
6.8V
SWITCHPB504
1 A1
3 A2
2B1
4B2
VR444
6.8V
VR440
B503if
12VVR439
2
4
3TAB1
1TAB2
2
TAB33
TAB44
TAB55
ANTENNA_NUT
J102
R5070
2 4
1 3CR503
K2
K3
VR441
6.8V
CR160
A1
A2
A3
K1
C522.01uF
if
4GND
1
2
3
RF_JACK
J101RF_JACK
.01uFC520
C503
C521
100pF
.01uF
100pF 100pFC514C513
3 A2
2B1
4B2
PB502SWITCH
1 A1
CR5011
2
B504
100pF
C505
LI_ION
BATT_CODE
Vdda
MECH_SWB+
PTT
SB2
Vdda
VOL
UNSWB+
EMER
GREEN_LED
SWB+
RED_LED
RTA0
RTA1
RTA2
RTA3
SB1
0MHz Controls And Switches Schematic Diagram (sheet 2 of 2)
http:/
/www.m
yrad
io168
Circu 5D-21
G
BATTERY_CONTAC
BATT-
BATT+
DATA1NEG
3POS
CONN_J
B501
2
506
6.8V
L505390nH
RADIO_CODE
301003-O
330-400MHz Controls And Switches Schematic Diagram(sheet 2 of 2 for 8404101G06 PCB)
.net
it Board/Schematic Diagrams and Parts List
G
G
G
G
G
G
G
G
G
G
GG
G
G
G
G
G
G
G
G
Q502
NU
NU
NU
LOW
1
5
HIGH
3
6TAB1
7TAB2
2
ifSWITCHS502
4
0
B503
A11
A23
B1 2
B2 4
R507
SWITCHPB505
.01uFC521
VR444
6.8V
IMX1
5
1
6
C505
100pF
6.8V
VR440
47KR506
CR501
1
2
VR441
6.8VC522.01uF
B504
23.57nHL116
CR160
A1
A2
A3
K1
K2
K3
R501
2 4
1 3
680
CR503
C503
C141NU
100pF
NU
3
B1 2
B2 4
C140
SWITCHPB504
A11
A2
A11
A23
B1 2
B2 4
SWITCHPB501
TAB22
TAB33
TAB44
TAB55
Q505
ANTENNA_NUT
J102
TAB11
0.47uF
2
3
DUMMY
C502
J101RF_JACK
if
4GND
1
V
P100
2
4
3
10KR505
12VVR439
100pFC511
100pF100pFC512 C514C513
24V
21
100pF
F501
R502180
.01uFC520
6.8V
VR443
GND
7 9
GND1
PC01
PC12
PC24 8PC3
SWITCH
S501
C0C0
C1 C1
6.8V
RF_JACK
VR501
A11
A23
B1 2
B2 4
SB1
PB502SWITCH
Vdda
MECH_SWB+
Vdda
VOL
UNSWB+
EMER
LI_ION
BATT_CODE
GREEN_LED
SWB+
RED_LED
RTA0
RTA1
RTA2
RTA3
PTT
SB2
ZMY01
http:/
/www.m
yrad
io168
R
5D-22 Circuit Board/Schematic Diagrams and Parts List
RX_I
NUC381
R3290
C318
12pFC317
8.2 pF
T301
4
6
3
1
2
XFMR
TP302
T302XFMR
46
31 2
C320 C3197.5pF 1.8pF
16.28nHL309R348
3.6K
R338R335
RT301
2 1
C391
NUNU
NUNU
R5
C370100pF
R330RSSI
RX_INJ
NUR331 C372
Q3101
3
2
C371
100pFC386
NU
NUNUNU
0R349
100pFC374
C378C373NU NU
C375
VCOBUF
100pF
R332
L321
0R339
R5
NU
NU
R333NU
R30918
82pFC322
L310150nH
270R308
270R310
2
34
1
CR306
IF
[email protected]@399.725MHz
[email protected]@354.625MHz
-50dBm
ZMY0130352-O
330-40
.net
L340390nH
HSMP38201
23
CR308
R3171K
100pFC395 C331
100pF
1KR347
R5
C311
100KR307R306
100K
CR304
C306
CR305
C3128.2pF
22nHL305
C31312pF
L30619.71nH19.71nHL307
5.1 pFC316
NU
NU
R305470
R30412K
C321100pF
C309100pF
R3031 K
Q301
13
2
C3070.1uF
0.1uFC314
180nHL304
C315100pF
C3100.1uF
R3282.7
L30333nH
R3408.2K
19.71nHL302
C308100pF
100KR301
12pFC302
C30512pF
CR301 CR302
5.1pFC303
11pFC304
R302
L301
100K
19.71nH1
CR303
2
3
C3018.2pF
N
1
SH304SHIELD
1
SHIELDSH302
1
SHIELDSH301 SH303
SHIELD
1
RXFE Top Shield RXFE Bottom Shield Mixer Shield
RX Mixer Diode Shield
.01uFC380
100KR342
R5
DACRx
R336
C333R5
NU
NU
33KR327
R31691K
Q315
13
218KR318
R319150
C396NU
R3002.2K
1uFC397
1
33.0KRT300
2
R334
Q316
13
2VR300
R326
NU
NU
NU
NU
R3256.8K
[email protected]@399.725MHz
1.797V@
0.508V
4.396V
2.285V
[email protected]@399.725MHz
Note:Rx1 = [email protected] rf signalRx2 = [email protected] rf signalprobed using high impedence probe
0MHz Receiver Front End Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5D-23
DB
C383100pF
Hz
Vdd_FILTERED
C350330pF
C349.022uF
2KR324
C35120pF
BFQ67WQ320
1
3
212pFC352
0R355
43pFC353
C362.022uF
56pF 100nHL332C385
.01uFC364
CR310R3201K
R3212.4K
C3632.2uF
2.20uHL325
R34656K
200KR322
C35447pF
100pFC390
100KR350
uF45
DEMOD
SH322SHIELD
1
SH321SHIELD
1
LVZIF TOP SHIELD LVZIF BTM SHIELD
C38456pF
10KR345
3.185V 2.628V
2.095V
ZMY0130349-O
330-400MHz Receiver Back End Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
TE
ST
D
VA
G
VA
G_R
EF
VP
P
RE
D_V
CC
RE
D_V
SS
RO
SE
_VC
CR
OS
E_V
SS
RS
SI_
FLT
RS
SI_
OU
T
TESTAIOUT
LIM
MIX_BYP
MIX_IN
MLPD_CR
PH
AS
E_L
OC
K
PREAMP_OUTPRE_AGC
PR
E_I
N
EM
IT
EX
TB
S
FREFGND
GO
LD_V
CC GOLD_VSS
GREEN_VCC
GREEN_VSS
C4M
C4P
CEXCLK
COL
DATA
DE
MO
D_H
FD
EM
OD
_OU
T
BROWN_VCCBRP_OFF
C1M
C1P
C2M
C2P
C3M
C3P
AF
C
BA
SE
BLUE_VCCBLUE_VSS
U30132D83
1615
24
2120
14
1918
13
17
2223
32 2530 2931 2636 28 27333435
42
464748
41
43
37
403938
4544
8 931 2 54 116 107 12
0.1uFC336
C356.022uF
L3142.2uH
C3411uF
C3391uF
C337100pF
C3401uF
1uFC342
Vdd_FILTERED
R5C3550.33uF
100pFC327
C3280.1uF
2.4KR312
C338
C330
15pF
10pF
R314
330
3K
R313
30KR311
C326.01uF
Q302R351
0
3.3KR352
12KR315
680nHL330
.01uFC325C323
150pF
20pFC324
750nHL311
GN
D2
4
GN
D3
5
OUT3
IN6
TBDXTALFL301
GN
D1
GN
D1
2
IF
10uFC382
C3480.1uF
0.1uFC329
2.20uHL331 R343
10
0.1uFC344
Vdd_FILTERED
(SOURCE)
C3430.22uF
0.1uFC347
0.1uFC346
Vdda
.022uFC334
0.1uFC359
1200pFC358
R34412K
0.22uFC357
16.8M
CLKDATA
LVZIF_SEL
0.1C3
DA
C361.01uF
C360.022uF
RSSI
SH323SHIELD
1
CRYSTAL FILTER SHIELD
0.706V
2.683V
http:/
/www.m
yrad
io168
5D-24 Circuit Board/Schematic Diagrams and Parts List
_16.8MHZY201
NU
NUR206
SYNTHESIZER TOP SHIELD SYNTHESIZER BOTTOM SHIELD
SHIELDSH201
SHIELDSH202
L23212uH
47KR204
CR203
C238470pF
NUC208
T3
4.3KR255
30R256
R5
120
R232620
R231
0.1uFC233
560R233
C2310.1uF
C2340.47uF
C232.047uF
TP2021
MODOUT
100pFC277
2.2uFC278
4V_3.3V
C2792.2uFF
0
GND2
NC
4
3
ON
_OF
F*
VIN
1
VO
UT
5
U248LP2980
94pF 0.47uF
C293
Vdda
SWB+
VCTRL
7.5V
3.3V
[email protected]@400MHz
ZMY0130350-O
330-40
.net
VMULT3VMULT4
WARP
XTAL1XTAL2
SFOUT
TEST1TEST2
VMULT1VMULT2
INDMULT
IOUT
LOCK
MODOUTFREFOUT
IADAPT
AUX1AUX2AUX3AUX4
ADAPTSW
PD
_GN
DP
RE
_GN
D
DG
ND
AG
ND
SFCAP
SFIN
VBPASS
PREIN
PVREF
REFSEL
SFBASE
MODIN
NC1NC2NC3
CCOMP
CEXCLK
DATA
BIAS1BIAS2
VR
OV
CP
PD
_VD
DP
RE
_VD
D
DV
DD
AV
DD
141211
25
2324
28
3738
15
16
43
4
4119
45
48123
46
13 475 34 3620
26
30
21
32
35
18
27
10
172931
98
7
4039
42
44336 22
63A27U201
C2042.2uF
C264100pF
C263NU
C214100pF 100pF
C211R201
R202100K
82K
DATA
100pFC212C210
100pF
L26182nH
MODIN
CLKCSX
PRESC
C2021000pF100pF
C201
VSF
TP2011
330pFC206R281
4.7uFC203
C20739pF
NUNU
NU
R205
C215
FADJ 2
GN
D4
OUT3
VD
D
1
5V
C216
OSC
NU
1GND GND1
4
OUIN6
FL201
75Z04
100pFC260
100pFC213
5V
LOCK
AUX4
AUX3
Q210
2
4
1
3
16.8MHz
10K
47K
4.7K47K
100pC22
C2100
2.2uFC235C223
0.1uF
C2240.1uF
L2012.2uH
L2032.2uH
10uFC291
C2180.1uF
C2172.2uF
4OUT 3
SD
ADP3300U247
6ERR
1
GN
D
5IN
2NR
0.22uFC219
L2022.2uH
0.1uFC298
C2920.1uF
5V(SOURCE)
C282C283
3 K3
CR201
A1 6A2 5A3 4
K112 K2
NUNU
C2291000pF100pF
C230
.01uFC258
C2284.7uF
C259.01uF
TC7ST04FUU210
3GND
2
1NC
4
5VCC
0.1uFC296
5VCC
TC7ST04FUU211
3GND
2
1
NC
4
C257100pFC265
NU
1.65V
Low (mV)
High (3.3V) High (3.3V)
1.5V
2.3V
3.3V
Rx3.7V1.6V
Tx1.6V3.7V
39 Bias240 Bias1
0MHz Synthesizer Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5D-25
.7pF245
L243
RESONATOR
1
2
3
7.5pFC250
7.5pFC242
6.8pFC243
1 2
CR243
A1 A2
CR241
C241100pF
390nHL242
390nHL241
CR242
R24310K
C2447pF
Rx_sw
F8
C2470.1uFC248
100pF
C253NU 100pF
C251CR252 CR251
13pFC252
13pFC256
180nHL251
VSF
VCTRL
RX_
TX_
2.9V Rx, 3.1V [email protected] Rx, 9.8V Tx@400MHz
ZMY0130351-O
330-400MHz Voltage Controlled Oscillator Schematic Diagram
.net
it Board/Schematic Diagrams and Parts List
TX_IADJ1
TX_OUT10
TX_SWITCH13
VC
C_B
UF
FE
RS
14
VC
C_L
OG
IC
18
RX_EMITTER6
RX_IADJ2
RX_OUT8
RX_SWITCH7
SUPER_FLTR3
TRB_IN19
TX_BASE16
TX_EMITTER15
COLL_RFIN4
FLIP_IN20
GN
D_B
UF
FE
RS
11G
ND
_FLA
G917
GN
D_L
OG
IC
PRESC_OUT12
RX_BASE5
50U54
U241
Rx_sw
Tx_sw
C2730.1uF
1pFC272
L27339nH
56nH
1pF
L271
C271
R245240
C2762.2uF
100pFC281
390nHL281
0.1uFC286
100pFC246
2C
180R242
100pFC285
R24120
12KR244
1
3
2 Q241BFQ67W
6.8pR24
L282390nH
R2537.5K
Tx_sw
C2542.7pF
R25122
L253
RESONATOR
1
2
3
100pFC289
100pFC255
R252200
R2545.6K
1KR260
4
1
3
Q261
2
10K
47K
47K
4.7K
2
4
1
3
Q260
C297.01uF
10K
4.7K
47K
47K
1
SHIELDSH242
1
SHIELDSH241
VCO TOP SHIELD VCO BOTTOM SHIELD
AUX 4
AUX 3
5V
VSF
PRESC
INJ
INJ
4.6V
2V
4.6V
4.6V
1.1V
http:/
/www.m
yrad
io168
5D-26 Circuit Board/Schematic Diagrams and Parts List
VL6 VLIM 19
TE
MP
30
V10
14
V45
16
17V5EXT
20VAR1
18VAR2
24VAR3
VG
15
22NA
Q11
QX
10
1 RFIN
RS 21
31R
SE
T
RX 23T12
CLK
26
CQ
12
CQ
X13
DA
TA
28
F16
89
GND18
GN
D2
25
INT4U102H99S
AN
O32
BP
OS
27
CE
X29
CI3
CJ5
CL7
C138100pF
CR105
GND
3
1
PO
S
2VOUT
R131
LM50
10KR130
18K
100pFC170
C110100pF
0.1uFC126
.022uFC173
5V
TX_BIAS
RESET
UNSWB+
DATA
CLK
CSX
100pFC122
C105100pF
4
1
3
100pFC132
Q111
2
6
100pFC174
R133
UNSWB+
NU
10K
4.7K47K
47K
C1343300pF
C135.022uF
F.022uFC131
390nHL114
100KR132
UNSWB+
RF
IN7
RF
OU
T2
1V
CN
TR
L14
VD
12
VG
13
VG
2
GND1 5GND2 12GND3 13GND4
8N
C1
9N
C2
10N
C3
15N
C4
U10109Z67
11G
2 4
100pFC130
C128.022uF
390nHL112
R1085.6K
.022uFC152
UNSWB+
G
7.01V Tx
7.08V Tx
0.269V Tx
ZMY0130353-A
330-40
.net
1000pFC127
L115 C133390nH 1000pF
C166100p
L113
C129
5.6nH
6.8pF
100pFC165
200KR109
2pFC169
6R
FO
UT
116
9.1pFC120
100pFC121
C150.022uFC151
100pF
C1610.1uF
200R161
L16015.0nH
56pFC160
33pFC116 C117
30pF
11.03nHL109
4.22nHL108
10R106
100pF
C115
C118
30pF
C125100pF
100pFC295
300R112R110300
20R111
R107TX_INJ_1
TX_INJ
NU
Microstrip Microstrip1
2
3C11111pF
C11247pF
L10733.47nH
0.1R102
C11310pF
BEADE101
C114100pF
C12310uF
200R172
0.1uFC172
Q110 Microstrip
L105C108100pF
390nH
240R170
240R101
C109100pF 7.66nH
L106
UNSWB+
3.3pF
1
A1
2
A2
K 3
C107
CR102
L10412.39nH
4.7pFC106
RX_IN
CR101
L10212.39nH12.39nH
L101
6.2pFC104C103
13pFC1026.2pF
C101100pF
4GND
1
2
3
J101RF_JACK
C141
TAB5 5
C140
TAB11TAB22
TAB3 3TAB4 4
ANTENNA_NUTJ102
9.75nHL116
HEATSINKH101
POS1
NU
NU
43KR120
100pFC119
100pFC171 R173
180K 43KR171
R174NU
SH100SHIELD
1
SHIELDSH101
1
HF SHIELD PA SHIELD
R10447K
C18836pF
1MER136
43R103
0R175
3dBM@450MHz Tx3dBM@527MHz Tx
0MHz Transmitter Schematic Diagram
http:/
/www.m
yrad
io168
Circu 5D-27
330Boa
CircR
B501B503
B504
C101C102C103C104C105C106C107C108C109C110C111C112C113C114C115C116C117C118C119C120C121C122C123C125C126C127C128C129C130C131C132C133C134C135C138C150C151C152C160C161C165C166
F
F
F
FF
Description
C331 2113743N50 100pFC334 2113743M08 0.022uFC336 2113743M24 0.1pFC337 2113743N50 100pFC338 2113743N30 15pFC339 2180478Z20 1.0uFC340 2180478Z20 1.0uFC341 2180478Z20 1.0uFC342 2180478Z20 1.0uFC343 2113743A23 0.22uFC344 2113743M24 0.1pFC345 2113743M24 0.1pFC346 2113743M24 0.1pFC347 2113743M24 0.1pFC348 2113743M24 0.1pFC349 2113743E07 0.022uFC350 2113743L05 330pFC351 2113743N33 20pFC352 2113743N28 12.0pFC353 2113743N41 43.0pFC354 2113743N42 47.0pFC355 2113743A24 0.330uFC356 2113743M08 0.022uFC357 2113743A23 0.22uFC358 2113741A23 1200pFC359 2109720D14 0.1uFC360 2113743E07 0.022uFC361 2113741F49 10nFC362 2113743M08 0.022uFC363 2311049A40 2.2uFC364 2113743L41 0.01uFC370 2113743N50 100pFC374 2113743N50 100pFC375 2113743N50 100pFC380 2113743L41 0.01uFC382 2311049A59 10uFC383 2113743N50 100pFC384 2113743N44 56pFC385 2113743N44 56pFC386 2113743N50 100pFC390 2113743N50 100pFC395 2113743N50 100pFC397 2311049A07 1.0uFC502 2311049A05 0.47uFC503 2113743N50 100pFC505 2113743N50 100pFC511 2113743N50 100pFC512 2113743N50 100pFC513 2113743N50 100pFC514 2113743N50 100pFC520 2113743L41 0.01uF
CircuitRef
MotorolaPart No. Description
.net
it Board/Schematic Diagrams and Parts List
-400MHz Radio Parts List (RFrd)
uitef
MotorolaPart No. Description
0986237A02 Battery Contact Module3980502Z01 Backup Battery Contact, B+
(not used in GP328 Plus)3980501Z01 Backup Battery Contact, B-
(not used in GP328 Plus)2113740F51 100pF2113740F27 6.2pF2113740F32 10pF2113740F27 6.2pF2113743L05 100pF2113740F19 4.7pF2113740F15 3.3pF2113743L05 100pF2113740F51 100pF2113743L05 100pF2103689A46 13pF2180605Z34 47pF2180605Z16 10pF2113743L05 100pF2113743N26 10pF2113743N26 10pF2113743N36 27pF2113743N50 100pF2113743L05 100pF2113743N25 9.1pF2113743N50 100pF2113743L05 100pF2311049A18 10uF2113743N50 100pF2113743M24 0.1uF2113743L17 1000pF2113743M08 0.022uF2113743N33 7.5pF2113743L05 100pF2113743M08 0.022uF2113743L05 100pF2113743L17 1000pF2113743L29 3300pF2113743M08 0.022uF2113743L05 100pF2113743M08 0.022uF2113743L05 100pF2113743M08 0.022uF2113743N50 100pF2113743M24 0.1uF2113743N50 100pF2113743L05 100pF
C169 2113743N30 15pFC170 2113743L05 100pFC171 2113743L05 100pFC172 2113740F50 100uFC173 2113743M08 0.022uFC174 2113743L05 100pFC180 2113743N26 10pFC188 2113743N50 100pFC193 2113743M24 0.1uFC201 2113743N50 100pFC202 2113743L17 1000pFC203 2311049A56 4.7uFC204 2104993J02 2.2uFC206 2113740F63 330pFC207 2113743N40 56pFC210 2113743N50 100pFC211 2113743N50 100pFC212 2113743N50 100pFC213 2113743N50 100pFC214 2113743N50 100pFC217 2104993J02 2.2uFC218 2113743M24 0.1uFC219 2113743K16 0.22uFC220 2113743N50 100pFC223 2113743M24 0.1uFC224 2113743M24 0.1uFC228 2311049J11 4.7uFC229 2113743L17 1000pFC230 2113743N50 100pFC231 2113743M24 0.1uFC232 2113743E12 0.047uFC233 2311049A01 0.1uFC234 2311049A05 0.47uFC235 2104993J02 2.2uFC238 2113741F17 470pFC241 2113743N50 100pFC242 2113743N23 7.5pFC243 2113743N22 6.8pFC244 2113740F13 2pFC245 2113743N12 2.7pFC246 2113743N50 100pFC247 2113743N50 100pFC248 2113743M24 0.1uFC250 2113743N23 7.5pFC251 2113743N50 100pFC252 2113743N29 13.0pFC254 2113743N12 0.047uFC255 2113743N50 100pFC256 2113743N29 13.0pFC257 2113743N50 100pFC258 2113743L41 0.01uF
CircuitRef
MotorolaPart No. Description
C259 2113743L41 0.01uC260 2113743N50 100pFC264 2113743N50 100pFC271 2113743N03 1.0pFC272 2113743N03 1.0pFC273 2113743M24 0.1uFC276 2104993J02 2.2uFC277 2113743N50 100pFC278 2311049A09 2.2uFC279 2104993J02 2.2uFC281 2113743N50 100pFC285 2113743N50 100pFC286 2113743M24 0.1uFC289 2113743N50 100pFC291 2311049A69 10uFC292 2113743M24 0.1uFC293 2113743A27 0.47uC294 2113743N50 100pFC295 2113743N50 100pFC296 2113743M24 0.1uFC297 2113743L41 0.01uC298 2113743M24 0.1uFC301 2113743N24 8.2pFC302 2113743N28 12pFC303 2113740L11 5.1pFC304 2113743N27 11.0pFC305 2113743N28 12pFC306 2113743N22 6.8pFC307 2113743M24 0.1uFC308 2113743N50 100pFC309 2113743N50 100pFC310 2113743M24 0.1pFC312 2113743N24 8.2pFC313 2113743N27 11.0pFC314 2113743M24 0.1pFC315 2113743N50 100pFC316 2113740L11 5.1pFC317 2113743N27 11pFC318 2113743N24 8.2pFC319 2113743N21 6.2pFC320 2113743N20 5.6pFC321 2113743N50 100pFC322 2113743N48 82pFC323 2113743N54 150pFC324 2113743N33 20pFC325 2113743L41 0.01uC326 2113743L41 0.01uC327 2113743N50 100pFC328 2113743M24 0.1pFC329 2113743M24 0.1pFC330 2113743N26 10pF
CircuitRef
MotorolaPart No.
http:/
/www.m
yrad
io168
5D-28 Circuit Board/Schematic Diagrams and Parts List
C521C522C523C525C526C527C528C529C530C531C532C533C534C535C536C537C538C545C546C547C548C549C550C551C552C553C555CR101CR102CR103CR105CR201CR203CR241CR242CR243CR251CR252CR301CR302CR303
CR304CR305CR306CR308CR310CR501CR503E101F501
CircuiRef
tact FingerushButtonushButtonushButtonushButtonB PANELPCBntroller PCB
450 MHz 7.5VN/PNPN/PNP
N/PNPN/PNP
P-CHANMBT3906NNN/PNPN
escription
R193 0662057M57 200R201 0662057N21 82KR202 0662057N23 100KR204 0662057N15 47KR231 0662057M52 120R232 0662057M69 620R233 0662057M68 560R241 0662057M33 20R242 0662057M56 180R243 0662057M98 10KR244 0662057N01 12KR245 0662057M59 240R248 0662057M37 30R251 0662057M34 22R252 0662057M57 200R253 0662057N03 15KR254 0662057M92 5.6KR255 0662057M89 4.3KR256 0662057M37 30R260 0662057M74 1KR300 0662057M82 2.2KR301 0662057N23 100KR302 0662057N23 100KR303 0662057M74 100KR304 0662057N01 12KR305 0662057M66 470R306 0662057N23 100KR307 0662057N23 100KR308 0662057M60 270R309 0662057M32 18R310 0662057M60 270R311 0662057N10 30KR312 0662057M83 2.4KR313 0662057M62 330R314 0662057M85 3KR315 0662057N01 12KR316 0662057A96 91KR317 0662057M74 1KR318 0662057A79 18KR319 0662057A29 150R320 0662057M74 1KR321 0662057M83 1KR322 0662057N30 1KR324 0662057M81 2KR325 0662057M94 6.8KR327 0662057N11 33KR328 0662057M12 2.7R329 0662057M01 0R339 0662057M01 0R340 0662057M96 8.2KR342 0662057N23 100K
CircuitRef
MotorolaPart No. Description
.net
2113743L41 0.01uF2113743L41 0.01uF2113743L41 0.01uF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF2113743N50 100pF4880973Z02 Pin Diode4802245J41 Pin Diode4802245J41 Pin Diode5185963A15 Temperature Sense4802233J09 Triple Diode4862824C03 Varactor4805649Q13 Dual Varactor4802245J22 Varactor4802245J22 Varactor4862824C01 Varactor4862824C01 Varactor4862824C01 Varactor4862824C01 Varactor4880154K03 Dual Common Anode-Cath-
ode4862824C01 Varactor4862824C01 Varactor4802245J42 Ring Quad Diode4802245J41 Pin Diode4862824C01 Varactor4880107R01 Rectifier4805729G49 LED Red/Yel2484657R01 Ferrite Bead6580542Z01 Fuse 3A
t MotorolaPart No. Description
FL201 4805875Z04 16.8MHZ XtalFL301 4802245J43 Xtal Filter 45.1MhzH101 2680499Z01 Heat SpreaderJ101 0985613Z01 RF Jack AssemblyJ102 0280519Z02 Antenna NutJ200 0905505Y04 CONN ZIF HORIZONTALL101 2479990B02 19.61nHL102 2479990B02 19.61nHL104 2479990B02 19.61nHL105 2462587N22 390nHL106 2460591A19 8.71nHL107 2479990G01 33.47nHL108 0611077A01 4.22nHL109 2479990B01 11.03nHL112 2462587N50 56nHL113 2413926H09 5.6nHL114 2462587N45 22nHL115 2462587N22 390nHL116 2460591C56 23.57nHL117 2409154M17 22.0nHL160 2413926H14 15.0nHL201 2462587Q20 2.2uHL202 2462587Q20 2.2uHL203 2462587Q20 2.2uHL232 2462587P25 12uHL241 2462587V41 390nHL242 2462587V41 390nHL243 2460593C02 Teflon ResonatorL251 2462587V37 180nHL253 2460593C02 Teflon ResonatorL261 2462587V33 82nHL271 2462587V31 56nHL273 2462587V29 39nHL281 2462587V41 390nHL282 2462587V41 390nHL301 2460591D24 19.71nHL302 2460591D24 19.71nHL303 2462587V28 33nHL304 2462587V37 180nHL305 2462587V23 12nHL306 2460591D24 19.71nHL307 2460591D24 19.71nHL309 2479990C02 16.28nHL310 2462587V36 150nHL311 2462587N65 750nHL314 2462587N72 2200nHL325 2480646Z20 2.20uHL330 2462587N64 680nHL331 2480646Z20 2.2uHL332 2462587N53 100nHL340 2462587V41 390nH
CircuitRef
MotorolaPart No. Description
L400 2462587Q42 390NHL401 2462587Q42 390NHL410 2462587Q42 390NHL411 2462587Q42 390NHL505 2462587Q42 390nHP100 3905643V01 Gnd ConPB501 4070354A01 Tactile, PPB502 4070354A01 Tactile, PPB504 4070354A01 Tactile, PPB505 4070354A01 Tactile, PPCB 6404103G02 330M PCPCB RF 8404101G02 330M RFPCB Ctrl 8404051G07 330M CoQ110 4813828A09 TSTR 8WQ111 4802245J50 Dual NPQ210 4802245J50 Dual NPQ241 4805218N63 NPNQ260 4802245J50 Dual NPQ261 4802245J50 Dual NPQ301 4802245J44 NPNQ302 4802245J44 NPNQ315 4880214G02 NPNQ320 4805218N63 NPNQ400 4809579E18 MOSFETQ403 4813824A17 TSTR MQ405 4802245J54 Dual NPQ410 4802245J54 Dual NPQ417 4802245J50 Dual NPQ502 5180159R01 Dual NPQ505 4880214G02 NPNR101 0662057A34 240R102 0680735Z01 0.075R104 0662057N15 47KR106 0662057M26 10R108 0662057M92 5.6KR109 0662057N30 200kR110 0662057M61 300R111 0662057M33 20R112 0662057M61 300R120 0662057N14 43KR130 0662057M98 10KR131 0662057N05 18KR132 0662057N33 270KR136 0662057N47 1.0M 5%R161 0662057M57 200R170 0662057A34 240R171 0662057N14 5.6KR172 0662057A25 100 ohmR173 0662057N29 180KR175 0662057B59 3 ohmR176 0662057B59 3 ohm
CircuitRef
MotorolaPart No. D
http:/
/www.m
yrad
io168
Circu 5D-29
R343R344R345R346R347R348R349R350R351R352R355R501R502R505R506R509RT30RT40S501S502SH1SH1SH2SH2SH2SH2SH3SH3SH3SH3SH3SH3SH3T301T302U101U102U201U210U211U241U247U248U301VR5VR5
CircR
.net
it Board/Schematic Diagrams and Parts List
* Motorola Depot Servicing only
0662057M26 100662057N01 12K0662057M98 10K0662057N17 56K0662057M74 1K0662057M87 3.6K0662057C01 00662057N23 100K0662057C01 00662057M86 3.3K0662057M01 00662057M70 6800662057M56 1800662057M98 10K0662057N15 47K0662057M01 0
0 0680590Z01 THERMISTOR_33K0 0680590Z01 Thermistor 33K
4080710Z01 Channel Switch1880619Z02 Volume Switch
00 2680507Z01 Harmonic Filter Shield01 2680510Z01 PA Shield01 2680511Z01 Synthesizer Top Shield02 2680511Z01 Synthesizer Bottom Shield41 2604120G01 VCO Top Shield42 2680514Z01 VCO Bottom Shield01 2680554Z01 Rx Pre-Filter Shield02 2680555Z01 Rx Post-Filter03 2680509Z01 Mixer Shield04 2680624Z01 Mixer Diode Shield21 2680508Z01 Zif 2nd Lo Shield22 2680514Z01 Zif Shield23 2604082P01 Xtal Filter Shield
2580541Z02 XFMR Coil2580541Z02 XFMR Coil5185130C65 LDMOS Driver5185765B28 Power Control IC5185963A27 LVFRACN5102463J61 Inverter5102463J61 Inverter5105750U54 VCO Buffer5105739X05 Regulator Linear5102463J58 3.3V Regulator5109632D83 LVZIF
01 4813830A18 6.8V Zener06 4802245J73 6.8 V Zener
8404101G02 RF PCB8404101G03 RF PCB8404101G04 RF PCB8404101G06 RF PCB
uitef
MotorolaPart No. Description
http:/
/www.m
yrad
io168
5D-30 Circuit Board/Schematic Diagrams and Parts List
.net
THIS PAGE INTENTIONALLY LEFT BLANK
http:/
/www.m
yrad
io168
Troubleshooting charts 5D-31
9.0 Troubleshooting charts
MCU Check
Power UpAlert Tone
OK?
SpeakerOK?
U409 EXTAL=7.3728 MHz?
U201 Pin 1916.8 MHz
5V at U247?3.3V at U248?
U409 Reset Pin94 High?
MCU is OK
Not able to pro-gram RF Board
ICs
Before replacingMCU, check SPI
clock, SPI data, andRF IC select
Replace Speaker
Read Radio OK?CheckSetup
Reprogram thecorrect data.
See FGUTroubleshooting
7.5V atPin 3/5 U247? 4/
3.3V at Pin 1U248
CheckQ400
Replace U247/U248
Check any short toSWB+,
Vdda or Vddd
Press PTT. RedLED does not
light up
PTT U409 Pin53
low?
Press PTTQ502-2 High?
CheckPB504
CheckQ502-2voltage
LEDQ502,R501
OK?
ReplaceFaulty
Component
CheckAccessories
J403 OPT_SEL_1& OPT_SEL_2
Pin 8 & 9low?
Radio couldnot PTT
externally
U409Pin 52, 6
low?
See FGUTroubleshooting
chart
LED shouldlight up
CheckMCU
PTT
NO
YES
YES
No
No
NO
YES YES
NO
YES
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
YES
YES
NO
NO
YES
EXTSPKR
EXTPTT
INTAUDIO
J403 Pin 9 low?Pin 8 high?
ASFIC U404 Pin14 & 15 high?
CheckAccessories
CheckU404
CheckU420 Audio PA
NO
NO
YES
YES
J403 Audioat Pin 2 &
Pin 3
Check Spk. FlexConnection
Audio atAudioPA(U420)input
(U447)
Audio from Pin 41ASFIC, U404?
Check ASFICU404
CheckAudio PA(U420)
Check U301LV ZIF
Audio atPin 2
U404?
NO
NO
NO
YES
YES
NO
YES
Troubleshooting Flow Chart for Controller
http:/
/www.m
yrad
io168
.net
5D-32 Troubleshooting charts
Bad SINADBad 20dB Quieting
No Recovered Audio
START
Audio at pin 27of U301?
Check ControllerYes
No
Spray of inject 1st IF intoXTAL Filter
IF Freq: 45.1MHz
Audio heard?BYes
No
Check 2nd LO ControlVoltage at C363
VCO locked?BYes
16.8 MHzcheck at pin 22
U301?
Activity onU301 sel pin?
Check FGU
No
No
A
A
Yes
Check Q320 bias cir-cuitry for faults.
Rotate Freq. Knob
Check controller.
Before replacing U301, check 2nd VCOQ320. Check VCO O/P level, C351,
C352.
Yes
No
Troubleshooting Flow Chart for Receiver (Sheet 1 of 2)
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5D-33
IF Signal atL311?
No
RF Signal atT301?
RF Signal atC310?
No
RF Signal atC307?
No
RF Signal atC301?
No or
Check harmonic filters L101 & L102 and ant.switches CR101, CR102, L104
Check filter between C301& C307; program filter to
schematic test freq andcheck varactor voltages.
Inject RF into J101
Are varactorvoltages OK?
No
Yes
Check RF amp (Q301)Stage.
Check filter betweenC310 & T301.
Yes
Check T301, T302,CR306, R308, R309,
R310Yes
1st LO O/POK?
Locked?
Yes
Check FGU
Yes
Trace IF signalfrom L311 to
Q302. Check forbad XTAL filter.
No
Yes Q302 collectorOK?
IF signalpresent?
Before replacingU301, check
U301 voltages;trace IF signal
path.
Yes
Check for 2.6VDC
Is R5 present?
Check Q210, U201(pin 48) voltages and
U247
No
No
No
Check U404 voltage. U404can be selected by MCUbefore replacing U404.
Check varactor filter.
No
Yes
Yes
Yes
A
A
B
weak RF
Troubleshooting Flow Chart for Receiver (Sheet 2 of 2)
http:/
/www.m
yrad
io168
.net
5D-34 Troubleshooting charts
START
No Power
Is There B+Bias for Ant
switch
Check Q111
Is CurrentOK?
Is Control VoltageHigh or Low
Check PCIC
1. Check Pin Diodes2. Check Harmonic Filter
Inspect/Repair Tx. Out-put Network
Is PowerOK?
Done
Check Drive toModule
Is DriveOK? Troubleshoot
VCO
Inspect PA Network/CheckPower Out of U101 at Cap
C160
Is PowerOK?
Replace U101
Is PowerOK?
Replace Q101
Done
Done
No
Yes
Yes No
No
Yes
Low
High
No
Yes
Yes
No
Yes
No
Troubleshooting Flow Chart for Transmitter
http:/
/www.m
yrad
io168
.net
Troubleshooting charts 5D-35
5Vat pin 6 ofCR201
Is informationfrom µP U409
correct?
Is U201 Pin 18AT 4.54 VDC?
Is U201 Pin 47AT = 13 VDC
Is U241 Pin 19<0.7 VDC in RX &>4.3 VDC in TX?
Start
Visualcheck of theBoard OK?
CorrectProblem
Check 5VRegulator
+5V at U201Pin’s
13 & 30?
Is 16.8MHzSignal at
U201 Pin 19?
Check FL201, C206,C207, C208, CR203 &
R204
Are signalsat Pin’s 14 &15 of U201?
CheckL202 Check Q260,
Q261 & R260
U201 pin 2 at>3V in Tx and<0.7V in Rx
Replace U201
RemoveShorts
Is there a shortbetween Pin 47 and
Pins 14 & 15 ofU201?
Replace orresolder
necessarycomponents
Is RF level atU201 Pin 32>-30 dBm?
Are R231,R232,R233,C231,C232,
& C233 OK?
Replace U201
If L261, C263 & C264are OK, then see VCOtroubleshooting chart
Are Waveformsat Pins 14 & 15
triangular?
Do Pins 7,8 & 9of U201 togglewhen channel is
changed?
Check programminglines between U409
and U201 Pins 7,8 & 9
Replace U201
Check uP U409Troubleshooting
Chart
NO
YES
NO
YES
NO
YES
NO
YES
NO
NO
NO
YES
YES
NO
YES
YES
NO
YES
YES
YES
NO
NO
NO
NO
YES
NO
YES
YES
Check CR201, U210,U211, C258, C259 &
C228
3.3V at U201pins 5, 20, 34 &
36
Check U248,L201 & L202
Is16.8MHzsignal atU201 pin
23?
ReplaceU201
YES
NO
NO
YES
NO
YES
Troubleshooting Flow Chart for Synthesizer
http:/
/www.m
yrad
io168
.net
5D-36 Troubleshooting charts
START
No LO?
Tx Carrier?
VCO OK
CheckR260
TRB = 5V?Pin 10>1V?
L253 O/C? ChangeL253
ChangeU241
AUX 3High?
Check U201Pin 2 for 3.2V
Pin 19 =0V
AUX 4High?
ChangeQ261
V ctrl 0Vor 13V?
L243 OpenCircuit?
ChangeU241
ChangeL243
ChangeU201
Check for faulty parts or dryjoints of L271, L273, C370,
C386, R339 & L320
A
A
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
Check R245 for dryjoint or faulty
No
Troubleshooting Flow Chart for VCO
http:/
/www.m
yrad
io168
.net
6-1
Section 6
FLEX LAYOUT/SCHEMATIC DIAGRAMS AND PARTSLISTS
1.0 RF-Controller Interconnect Flex1.1 Rev A
1.2 Rev B
98C
J200
40
J400
40 <- TO CTRL
8480475Z02 REV A TO RF ->
Front MetalView From Top Side
98C
J20040
J400
40 <- TO CTRL
8480475Z03 REV B TO RF ->
Front MetalView From Top Side
http:/
/www.m
yrad
io168
.net
6-2 Schematic for RF-Controller Interconnect Flex
2.0 Schematic for RF-Controller Interconnect FlexKEYPADJ400
EXT_MIC
VS_CS
SW_B+
Vddd
VS_AUDSEL
Det_Aud_Snd
Rx_Aud_Rtn
Tx_Aud_Snd
Tx_Aud_Rtn
Flat_Tx_Rtn
Opt_Bd_En
Rdy/Req
Rx_Aud_Snd
ON
INT_EXT_Vdd
Key_Row
Key_Col
PTT
KEY_INT
VS_INT
RESET
LED_EN
OFF_BATT_DATA_OUT
VS_GAINSEL
SrD_Rtn (MISO)
SrD_Snd (DATA)
R_W
LCD_SEL
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
A0
SCK_Snd (CLK)
VS_RAC
Gnd
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
CONTROLLERJ200
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
EXT_MIC
VS_CS
SW_B+
Vddd
VS_AUDSEL
Det_Aud_Snd
Rx_Aud_Rtn
Tx_Aud_Snd
Tx_Aud_Rtn
Flat_Tx_Rtn
Opt_Bd_En
Rdy/Req
Rx_Aud_Snd
ON
INT_EXT_Vdd
Key_Row
Key_Col
PTT
KEY_INT
VS_INT
RESET
LED_EN
OFF_BATT_DATA_OUT
VS_GAINSEL
SrD_Rtn (MISO)
SrD_Snd (DATA)
R_W
LCD_SEL
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
A0
SCK_Snd (CLK)
VS_RAC
Gnd
http:/
/www.m
yrad
io168
.net
Universal Connector Flex 6-3
3.0 Universal Connector Flex3.1 GP328 Plus
Back MetalView From Top Side
c
98
8480549Z03 rev B
C402
M400
20J403
J404J405
J406J407
J408J409
J410J411
J412J413
J414J415
J416
M401
Front MetalView From Top Side
http:/
/www.m
yrad
io168
.net
6-4 Universal Connector Flex
3.2 GP338 Plus
View From Top Side
C
8486095Z01_O 2001
C402
Front MetalView From Top Side
J404
J405
J406
J407
J408J409
J410
J411
J412J413
J414
J415J416
2
1
M400
M401
P403
120
Back Metalhtt
p://w
ww.myr
adio1
68.ne
t
Schematic for Universal Connector Flex 6-5
4.0 Schematic for Universal Connector Flex4.1 GP328 Plus
4.2 GP338 Plus
13 PIN UNIVERSAL CONN
EXT_SPKR+
EXT_SPK-
OPT_B+
EXT_MIC
OPT_SEL_2
OPT_SEL_1
GND
RX_DATA
TX_DATA
J404
J405
J406
J407
J408
J409
J410
J411
J412
SPKR_20
SPKR_20
OPT_B+30
RSSI
RX_AUDIO/TX_AUDIO
BOOT_CTRL
NC
J413
J414
J415
J416
1
2
C402100pF
M401
GND
INT_SPK+
INT_SPK-
EXT_SPKR+
EXT_SPK-
DPT_B+
EXT_MIC
OPT_SEL_2
OPT_SEL_1
GND
RX_DATA
TX_DATA
GND
RSSI
RX_AUDIO/TX_AUDIO
BOOT_CTRL
NC
MIC
GND
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
J40320 PIN CONN
M400
SPKR_20
SPKR_20
EXT_SPKR+
2113740A55
EXT_SPK-
OPT_B+
EXT_MIC
OPT_SEL_2
OPT_SEL_1
GND
RX_DATA
BOOT_CTRL
13 PIN UNIVERSAL CONN
NC
E.C.M.
TX_DATA
RSSI
RX_AUDIO/TX_AUDIO
J404
J406
J405
J408
J407
J409
J410
J414
J413
C402100pF
5013920A04
M401
2
1+
J415
J412
J416
J411
spe
SPKR_20
OPT_B+30
5005679X01
SPEAKER
M400
SPKR_20
SPKR_20
20 PIN CONNP403
INT_SPK-
EXT_SPKR+
EXT_SPK-
OPT_B+
EXT_MIC
OPT_SEL_2
OPT_SEL_1
GND
RX_DATA
TX_DATA
GND
RSSI
RX_AUDIO/TX_AUDIO
MIC
GND
GND
GND
INT_SPK+
NC
BOOT_CTRL
P403-1
P403-2
P403-4
P403-5
P403-3
P403-19
P403-6
P403-7
P403-9
P403-8
P403-10
P403-11
P403-13
P403-12
P403-14
P403-16
P403-15
P403-17
P403-18
P403-20
http:/
/www.m
yrad
io168
.net
6-6 Parts List for Universal Connector Flex
5.0 Parts List for Universal Connector Flex5.1 GP328 Plus
5.2 GP338 Plus
ReferenceSymbol
MotorolaPart No. Description
C402 2113740A55 Cap, 100pFM400 5005679X01 Speaker, 24 ohmM401 5013920A04 Mic, Mini electrec
ReferenceSymbol
MotorolaPart No. Description
C402 2113740A55 Cap, 100pFM400 5086094Z01 Speaker, 20 ohmM401 5013920A04 Mic, Mini electrec
http:/
/www.m
yrad
io168
.net
s,
t you
Technical Information UpdatesAs we continue to make engineering enhancements to our products, the information in ourService Manuals need to be updated accordingly. If you wish to be informed of these updatekindly fill in and fax us your details.
Manual No.: 6804112J28
Kindly complete the Service Manual Feedback Form on the next page to help us ensure thareceive the most accurate and complete information.
Fax to: 6-04-6124944
The Technical Publications Coordinator,Media and Communications,R&D Department,Motorola Penang.
Your Details
Name/Contact Person:
Company Name:
Address:
Telephone No.:
Fax No.:
Email Address:
How would you like to receive the update notification?Through: o mail o email o fax
http:/
/www.m
yrad
io168
.net
ls.tion.
tain
ease
Service Manual Feedback FormWe believe that reports from users provide valuable information for producing quality manuaKindly take a few moments to provide feedback on this manual. Thank you for your coopera
1. Please check all the appropriate boxes:
2. How do you rate this particular Service Manual?o excellent o very good o good o fair o poor
3. Did this Service manual provide you with the information necessary to service and mainthe specific equipment?o very much so o generally yes o to some extent o no
4. We would appreciate any corrections or recommendations for improving this manual. Plinclude the specific page number(s) of the diagram or procedure in question.
5. General comments/suggestions:
Manual No.: 6804112J28
Fax to: 6-04-6124944
The Technical Publications Coordinator,Media and Communications,R&D Department,Motorola Penang.
Com
ple
te
Inco
mp
lete
Cor
rect
Inco
rre
ct
Cle
ar
Con
fusi
ng
Siz
eA
de
qua
te
Siz
eTo
oS
ma
ll
No
tCov
ere
din
this
Man
ual
Disassembly Pro-cedures
AlignmentProcedures
ExplodedViews
SchematicDiagrams
Circuit BoardDetails
Electrical PartsList
Exploded ViewParts List
http:/
/www.m
yrad
io168
.net
Related Documents
