Govement of India BHABHA ATOMIC RESEARCH CENTRE Quality Assurance Division Material Evaluation Section Re BARC/QAD/MES/2018/0PA- 2584 January 3. 2018 Sealed offers are invited r & on behalf of President of India for "Design, fabrication and installation of 3-axis manipulator for holding Flat panel detector r Real-time radiography as per tec/ical speccation given below in Description." S.No. 1. DISCRIPTION Technical Specification r XYZ-axis manipulator r Radiography A high precision automation system has to be designed, bricated and installed r holding and positioning of Flat panel detector. This system consists of llowing components: Qty. 1. Detector Holding Fixture: O t no. or This fixture to hold detector shall be made up of SS sheet of 1 manipulator mm thickness. Plates shall be screwed to rm a rectangular holder with necessary cut outs on the side wall to allow cables to pass. Front side shall have openable shutter type of arrangement. Shutter ont door shall be made up of lead sand- witched with SS sheet. Lead sheet of thickness 2 mm shall be filled into the cavity made between SS sheets. The exact dimension of the detector will be provided to the selected vendor with the work order. Fig.1: A typical Flat panel