Features – Benefits Abrasion Resistant Blue Nylon Casing – Provides high visibility for safety and the toughest exterior available to withstand harsh industrial environments Internally Lubricated Shaft Insert molded out of a self lubricating material – Reduces friction and increases shaft life Metal Nut – Provides a secure connection to the drive unit without any concern for breakage Unique Strain Relief System custom molded with a variable thickness – Allows for a gradual radial bend that is far superior to a spring or coiled wire Shaft Stop which can be positioned anywhere along the shaft – Lets the operator know when the end of the tube has been reached Quick Connect Tool Coupling – Allows the operator to change brushes and cleaning tools up to 30 times faster then on shafts with threaded connections Galvanized Spring Steel comprised of multiple counter rotated windings – Unmatched performance and long durability 22 Goodway Flexible Shafts TUBE CLEANER ACCESSORIES Galvanized Spring Steel Metal Nut Unique Strain Relief System Shaft Stop Internally Lubricated Shaft Insert Abrasion Resistant Blue Nylon Casing Shaft No. Casing O.D. Tool End Thread 701 1 ⁄4" (6.4mm) 8-32 female 702 3 ⁄8" (9.5mm) 1 ⁄4-28 female 703 1 ⁄2" (12.7mm) 1 ⁄4-28 female 704 9 ⁄16" (14.3mm) 1 ⁄4-28 female QUICK CONNECT FITTINGS Patented Patented Quick Connect Tool Coupling THE BEST IN THE BUSINESS Note: Look for this symbol for Quick Connect Shaft and Brush Fittings. Shaft No. Casing O.D. Tool End Thread 720 3 ⁄4" (19.1mm) 1 ⁄2-12 female 721 7 ⁄8" (22.2mm) 1 ⁄2-12 female 721G 7 ⁄8" (22.2mm) 1 ⁄2-12 female 821 7 ⁄8" (22.2mm) 1 ⁄2-12 female Flexible Shaft Dimensions
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Features – BenefitsAbrasion Resistant Blue Nylon Casing – Provides high visibility for safety and the toughest exterior available to withstand harshindustrial environmentsInternally Lubricated Shaft Insert molded out of a self lubricating material – Reduces friction and increases shaft lifeMetal Nut – Provides a secure connection to the drive unit without any concern for breakageUnique Strain Relief System custom molded with a variable thickness – Allows for a gradual radial bend that is far superior to aspring or coiled wireShaft Stop which can be positioned anywhere along the shaft – Lets the operator know when the end of the tube has been reached
Quick Connect Tool Coupling – Allows the operator to change brushes and cleaning tools up to 30 times faster then on shaftswith threaded connectionsGalvanized Spring Steel comprised of multiple counter rotated windings – Unmatched performance and long durability
22
Goodway Flexible ShaftsTU
BE
CLE
AN
ERA
CCES
SO
RIE
S
Galvanized Spring Steel
Metal Nut
Unique StrainRelief System Shaft Stop
Internally LubricatedShaft Insert
Abrasion ResistantBlue Nylon Casing
Shaft No. Casing O.D. Tool End Thread
701 1⁄4" (6.4mm) 8-32 female
702 3⁄8" (9.5mm) 1⁄4-28 female
703 1⁄2" (12.7mm) 1⁄4-28 female
704 9⁄16" (14.3mm) 1⁄4-28 female
QUICK CONNECT FITTINGS
Patented
PatentedQuick ConnectTool Coupling
THE BEST IN THE BUSINESS
Note: Look forthis symbol forQuick Connect Shaftand Brush Fittings.
Shaft No. Casing O.D. Tool End Thread
720 3⁄4" (19.1mm) 1⁄2-12 female
721 7⁄8" (22.2mm) 1⁄2-12 female
721G 7⁄8" (22.2mm) 1⁄2-12 female
821 7⁄8" (22.2mm) 1⁄2-12 female
Flexible Shaft Dimensions
34
Aggressive Tube Tools Continued
LARGEBRUSHES
ANDTO
OLS
Carbide DrillsCarbide Drills are recommended for cleaning straight, ferrous tubes plugged solidly with depositGTC-231D 3⁄4" (19.1mm), GTC-229 7⁄8" (22.2mm) or PTB-100 1" (25.4mm) $55.00 ea.Note: All drills run 10% oversize [e.g. GTC-231D Drill is 0.825" (21.0mm) O.D.].
Flex-Hone Abrasive ToolsFlex-Hone Abrasive Tools are light pressure, soft application honing devices for cleaning straight, ferroustubes. They consist of 180 grit silicon carbide abrasive globules (stones) bonded to high density nylonfilaments. Order tool to correspond to tube I.D.FHT-125 11⁄4" (32mm), FHT-150 11⁄2" (38mm), FHT-175 13⁄4" (45mm) or FHT-200 2" (51mm) $42.00 ea.FHT-225 21⁄4" (57mm), FHT-250 21⁄2" (64mm), FHT-275 23⁄4" (70mm) or FHT-300 3" (76mm) $52.00 ea.Note: Flex-Hone Abrasive Tools are normally used with water flush for maximum life.
Flex Hub ToolsFlex Hub Tools incorporate centrifugally activated blades for removing hard and heavy deposits in straight or curved,ferrous tubes. A drill can be attached to the front of the GTC-227 or GTC-231 Flex Hub to clean severely clogged tubes.GTC-226 Flex Hub for straight tubes 7⁄8"-11⁄2" (22.2-38mm) I.D. or curved tubes1"-13⁄4" (25.4-45mm) I.D. $75.00GTC-231 Flex Hub for straight tubes 11⁄2"-2" (38-51mm) I.D. or curved tubes13⁄4"-2 1⁄2" (45-64mm) I.D. $95.00GTC-227 Flex Hub for straight tubes 13⁄4"-4" (45-102mm) I.D. or curved tubes2 1⁄2"-4" (64-102mm) I.D. $105.00GTC-226A Replacement Metal Blades for GTC-226 (set of three) $55.00GTC-231A Replacement Metal Blades for GTC-231 (set of three) $60.00GTC-227A Replacement Metal Blades for GTC-227 (set of three) $70.00GTC-229 Drill to be attached to GTC-227 Flex Hub $55.00GTC-231D Drill to be attached to GTC-231 Flex Hub $55.00CUJ-002 Universal Joint for use with Flex Hubs when minimum tube bend radius is lessthan 5 x I.D. of the tube (consult factory) $58.00
Rigid Arm Flare Cone ToolsRigid Arm Flare Cone Tools incorporate centrifugally activated, serrated cones for removing light to heavy scaledeposits in straight, ferrous tubes. Use in horizontal or vertical tubes.FCT-300 Flare Cone Tool for tubes 13⁄4"-4" (45-102mm) I.D. $145.00FCT-301 Flare Cone Tool for tubes 4"-61⁄2" (102-165mm) I.D. $145.00RCO-100 Replacement Cone $30.00CRB-001 Replacement Cone Retainer Bolt $5.00
Flexible Arm Flare Cone ToolThe Flexible Arm Flare Cone Tool incorporates centrifugally activated serrated cones for removing light to heavyscale deposits in straight or curved, ferrous tubes. Most effective results are obtained if tube is in verticalposition when cleaning.FCT-600 Flare Cone Tool for tubes 4"-12" (102-305mm) I.D. $185.00RCO-100 Replacement Cone $30.00CRB-001 Replacement Cone Retainer Bolt $5.00
Flare BrushesFlare Brushes incorporate centrifugally activated wire cables with cobalt tips for light descaling and finishingof straight or curved, ferrous and nonferrous tubes.FBT-301 Three Strand Flare Brush for tubes 1"-2" (25.4-51mm) I.D. $75.00FBT-501 Five Strand Flare Brush for tubes 2"-4" (51-102mm) I.D. $85.00FBT-502 Five Strand Flare Brush for tubes 4"-8" (102-203mm) I.D. $95.00
Universal Nylon Rod (Flare) ToolThe Universal Nylon Rod (Flare) Tool incorporates centrifugally activated nylon rods for removing light depositsin straight or curved, ferrous and nonferrous tubes.UFT-005-8 Universal Nylon Rod (Flare) Tool for tubes 2"-15" (51-381mm) I.D. $45.00
Please check your tube I.D.before placing order.
Aggressive Tube Tools
33For Sales Call: +1-203-359-4708
Fax: +1-203-359-9601For tools or sizes not shown,consult factory.
LAR
GE
BR
USH
ESA
ND
TOO
LS
Cone Cutter Assemblies
To order Wheel Brush Assemblies refer tothe table below listing the type of tubes tobe cleaned – straight or curved.Straight Tube Wheel Brush AssembliesRecommended for removing soft and lightscale deposits in straight, ferrous tubes.Each assembly consists of four stainlesssteel wire wheel brushes attached to auniversal joint. Brushes should be 1⁄8"-1⁄4"(3.2-6.4mm) smaller than tube I.D.Curved Tube Wheel BrushAssembliesRecommended for removing soft and lightscale deposits in curved, ferrous tubes.Each assembly consists of a singlestainless steel wire wheel brush attachedto each end of a universal joint. Brushesshould be 1⁄4"- 3 ⁄ 8" (6.4-9.5mm) smallerthan tube I.D.* Note: GTC-706 Coupling required to
connect to GTC-720, GTC-721, GTC-721G
and GTC-821 Flexible Shafts.
Cone Cutter Assemblies are designed forremoving scale deposits from straight andcurved, ferrous tubes. Assemblies shouldbe slightly smaller than tube I.D. Theinnovative design of the cones ensures athorough cleaning. In watertube boilers,cone cutters are the most effectivecleaning tools for all conditions.Single and Double Cone AssembliesAssemblies consisting of one or two coneelements are used for cleaning straighttubes 11⁄8"-2 5⁄16" (29-59mm) I.D. andcurved tubes 11⁄4"-23⁄8" (32-60mm) I.D.Disc Cone AssembliesAssemblies consisting of three coneelements are used for cleaning straighttubes 23⁄8"-33⁄4" (60-95mm) I.D. and curvedtubes 21⁄2"- 4" (64-102mm) I.D.
Drill/Cone Assemblies are recommended for cleaning straight, ferrous tubes plugged solidly with deposits. Orderassembly to correspond to tube I.D.DDC-100 1" (25.4mm), DDC-112 11⁄8" (29mm),DDC-125 11⁄4"-13⁄8" (32-35mm), DDC-150 11⁄2"-15⁄8" (38-41mm) orDDC-175 13⁄4"-17⁄8" (45-48mm) $99.00ea.
Drill Cone Assemblies
Wheel Brush Assemblies
Curved Wheel Brush Actual ReplacementTube I.D. Assembly Brush O.D. Brushes
Plastic Brushes Recommended for removing soft deposits in straight, ferrous and nonferrous tubes. Orderbrush to correspond to tube I.D.
Spring Filled Brushes Recommended for removing heavy scale deposits in straight, ferrous tubes. The springbristles dig into the scale breaking it free from the tube wall.SFB-200 Spring Filled Brushes for tubes 13⁄8", 15⁄8", 2", 21⁄2", or 3" (35mm, 41mm, 51mm, 64mm or 76mm) O.D. $29.00 ea.SFB-300 Spring Filled Brushes for tubes 2" or 3" (51mm or 76mm) I.D. $29.00 ea.
Stainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for finishing tubespreviously “roughed out” with other cleaning tools. They can be used in straight, ferrous and nonferrous tubes.GTC-223 Buffing Tool for tubes 1"-3" (25.4-76mm) I.D. $39.00GTC-223DT Same as above with drill tip $75.00GTC-224 Replacement Blades for GTC-223 $8.00/set
Triangular Scraper Tools are used for removing heavy scale deposits in straight, ferrous tubes. They areadjustable to a 1⁄2" range.TST-1000 Triangular Scraper Tool for tubes 1"-11⁄2" (25.4-38mm) I.D. $99.00TST-1500 Triangular Scraper Tool for tubes 11⁄2"-2" (38-51mm) I.D. $105.00TST-2000 Triangular Scraper Tool for tubes 2"-21⁄2" (51-64mm) I.D. $115.00TST-2500 Triangular Scraper Tool for tubes 21⁄2"-3" (64-76mm) I.D. $140.00
Tube Brushes 1" and Up
31For Sales Call: +1-203-359-4708
Fax: +1-203-359-9601For tools or sizes not shown,consult factory.
LAR
GE
BR
USH
ESA
ND
TOO
LSDual Diameter Spin-Grit Brushes Recommended for removing soft and light scale deposits in straight,ferrous and nonferrous internally enhanced tubes. The small diameter end of this brush cleans into the grooveswhile the large diameter end cleans the lands of the tube’s rifling.ESGB-100 Dual Diameter Spin-Grit Brush for tubes 1" (25.4mm) I.D. $5.95ESGB-125 Dual Diameter Spin-Grit Brush for tubes 11⁄4" (32mm) I.D $5.95Note: ESGB brushes require a GTC-706 Coupling to connect to GTC-720, GTC-721, GTC-721G and GTC-821
Stainless Steel Brushes Recommended for removing soft and light scale deposits in straight, ferrous tubes.Order brush to correspond to tube I.D.
Note: TCB Brushes require a #TCB-C Coupling to connect to GTC-720, GTC-721, GTC-721G and
GTC-821 Flexible Shafts. (One coupling is supplied with each brush order.)
Brass Brushes Recommended for removing soft and light scale deposits in straight, ferrous and nonferroustubes. Order brush to correspond to tube I.D.
Brushes
Nylon Brushes Recommended for removing soft deposits (mud, algae, etc.) in straight, ferrous and nonferroustubes. Order brush to correspond to tube I.D.
30
Smooth Bore Tube Tools
3⁄8"-1" Only
www.goodway.com Please check your tube I.D.before placing order.
BR
USH
ESA
ND
TOO
LS
Adjustable Buffing ToolsStainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for finishing tubes previously “roughedout” with other cleaning tools. They can be used in straight, ferrous and nonferrous tubes. Buffing tools can only be used in aclockwise (forward) direction and cannot be used in internally enhanced tubes. They are adjustable to a 1⁄4" range.GTC-203 Buffing Tool for tubes 5⁄16"-3⁄8" (7.9-9.5mm) I.D. $17.00 GTC-203DT Same as GTC-203 with drill tip $23.00GTC-204Q Buffing Tool for tubes 3⁄8"-1⁄2" (9.5-12.7mm) I.D. $17.00 GTC-204QDT Same as above with drill tip $23.00GTC-205Q Buffing Tool for tubes 1⁄2"- 9⁄16" (12.7-14.3mm) I.D. $17.00 GTC-205QDT Same as above with drill tip $23.00GTC-206Q Buffing Tool for tubes 5⁄8"- 1" (15.9-25.4mm) I.D. $17.00 GTC-206QDT Same as above with drill tip $23.00GTC-207 Replacement Blades for GTC-203 and GTC-204 $7.50/setGTC-208A Replacement Blades for GTC-205 $7.50/setGTC-208B Replacement Blades for GTC-206 $7.50/setGTC-209 Adjusting Jig for GTC-203 and GTC-204 $28.00
Adjustable Triangular Scraper ToolTriangular Scraper Tools are used for removing heavy scale deposits in straight, ferrous tubes. They can only be used in a clockwise(forward) direction and cannot be used in internally enhanced tubes. They are adjustable to a 1⁄4" range.TST-500 Triangular Scraper Tool 1⁄2"-3⁄4" (12.7-19.1mm) I.D. $59.00TST-750 Triangular Scraper Tool 3⁄4"-1" (19.1-25.4mm) I.D. $69.00
Carbide DrillsCarbide Drills are recommended for cleaning straight, ferrous tubes plugged solidly with deposit.PTB-025 1⁄4" (6.4mm), PTB-037 3⁄8" (9.5mm), PTB-043 7⁄16" (11.1mm) or PTB-050 1⁄2" (12.7mm) $34.00 ea.PTB-056 9⁄16" (14.3mm), PTB-062 5⁄8" (15.9mm) or PTB-068 11⁄16" (17.5mm) $38.00 ea.Note: All drills run 10% oversize [e.g. PTB-062 Drill is 0.6875" (17.5mm) O.D.].
Flex-Hone Abrasive ToolsFlex-Hone Abrasive Tools are light pressure, soft application honing devices for cleaning straight, ferrous tubes. They consist of180 grit silicon carbide abrasive globules (stones) bonded to high density nylon filaments. Order tool to correspond to tube I.D.FHT-025 1⁄4" (6.4mm), FHT-031 5⁄16" (7.9mm), FHT-037 3⁄8" (9.5mm), FHT-043 7⁄16" (11.1mm) or FHT-050 1⁄2" (12.7mm) $26.00 ea.FHT-056 9⁄16" (14.3mm), FHT-062 5⁄8" (15.9mm) or FHT-068 11⁄16" (17.5mm) $28.00 ea.FHT-075 3⁄4" (19.1mm), FHT-087 7⁄8" (22.2mm) or FHT-100 1" (25.4mm) $32.00 ea.Note: Flex-Hone Abrasive Tools are normally used with a water flush for maximum life.
Flex Hub ToolFlex Hub Tools incorporate centrifugally activated blades for removing hard and heavy deposits in straight, ferrous tubes.GTC-225 Flex Hub for straight tubes 1⁄2"-1" (12.7-25.4mm) I.D. $175.00GTC-225A Replacement Metal Blades for GTC-225 (set of three) $95.00
U-Tube ToolsConsisting of brushes or grinding tips permanently mounted on 18" sections of flexible shafts, U-Tube Tools are designed to snake partiallythrough each side of a U-bend, to thoroughly clean from both sides.Cup Brush Tools – Brass or Stainless SteelCBT-075B Brass Cup Brush for tubes 1⁄2"- 3⁄4" (12.7-19.1mm) I.D. $27.50CBT-075S Stainless Steel Cup Brush for tubes 1⁄2"- 3⁄4" (12.7-19.1mm) I.D. $27.50Wheel Brush Tools – Brass or Stainless SteelWBT-075B Brass Wheel Brush 3⁄4" (19.1mm) diameter $30.00WBT-100B Brass Wheel Brush 1" (25.4mm) diameter $30.00WBT-075S Stainless Steel Wheel Brush 3⁄4" (19.1mm) diameter $30.00WBT-100S Stainless Steel Wheel Brush 1" (25.4mm) diameter $30.00Grinding Tip ToolsGTT-050 Grinding Tip Tool 1⁄2" (12.7mm) diameter $135.00GTT-625 Grinding Tip Tool 5⁄8" (15.9mm) diameter $135.00
7⁄16"-1" Only
7⁄16"-1" Only
7⁄16"-1" Only
7⁄16"-1" Only
Goodway’s exclusive Blue Nylon Brushesare the latest in nylon brush technology.They offer many advantages over othernylon brushes including:• X-shaped filaments to maximize brush
contact with tube• Higher bristle density for greater
cleaning power• 30% more stiffness when wet for better
maintenance of shape• Greater resistance to chemicals and
acids for longer life• Sizes boldly printed on brush stems for
easy identification
Brushes for Smooth Bore Tubes
Blue Nylon Brushes Recommended for removing soft deposits (mud, algae, etc.) in straight,ferrous and nonferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-211Q Blue Nylon Brushes 1⁄4",5⁄16", 3⁄8", 7⁄16", 1⁄2", 13⁄16", 7⁄8", 15⁄16" or 1"
(6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 20.6mm, 22.2mm, 23.8mmor 25.4mm) $4.00 ea. (Available in Bags of 15)
GTC-211Q Blue Nylon Brushes 9⁄16", 5⁄8", 11⁄16" or 3⁄4" (14.3mm, 15.9mm, 17.5mmor 19.1mm) $4.00 ea. (Available in Bags of 25)
Spin-Grit Brushes Recommended for removing soft and light scale deposits in straight, ferrousand nonferrous tubes. The abrasive impregnated nylon bristles of this brush clean and polish tubesin one step. Unlike regular spiral brushes, Spin-Grit is designed to be oversized in the tube so thebristles lay over, putting the abrasive in contact with the tube wall.SGB-050 Spin-Grit Brushes for tubes 1⁄4"-3⁄8" (6.4-9.5mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-075Q Spin-Grit Brushes for tubes 7⁄16"- 5⁄8" (11.1-15.9mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-100Q Spin-Grit Brushes for tubes 11⁄16"- 3⁄4" (17.5-19.1mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-125Q Spin-Grit Brushes for tubes 13⁄16"- 1" (20.6-25.4mm) I.D. $5.95 ea. (Available in Bags of 15)
Brass Brushes Recommended for removing soft and light scale deposits in straight, ferrous andnonferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-200BQ Brass Brushes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16" or 1"
(6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19.1mm,20.6mm, 22.2mm, 23.8mm or 25.4mm) $4.95 ea. (Available in Bags of 15)
Stainless Steel Brushes Recommended for removing soft and light scale deposits in straight,ferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-210Q Stainless Steel Brushes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8",
15⁄16" or 1" (6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm,19.1mm, 20.6mm, 22.2mm, 23.8mm or 25.4mm) $5.25 ea. (Available in Bags of 15)
Note: 1⁄4" and 5 ⁄16" (6.4mm and 7.9mm) threaded brushes require a #C-1 Coupling, and 3⁄8" (9.5mm)
threaded brushes require a #C-2 Coupling to connect to GTC-701 Flexible Shafts. (Couplings supplied
with GTC-701 Flexible Shaft order.)
Note: 9 ⁄16"-1" (14.3-25.4mm) brushes can be used for both clockwise and counter-clockwise rotation.
Note: All Goodway brushes and buffing tools are
available with standard threaded tool couplings.
To order leave off the “Q” in the part number.
Smooth Bore Tube Brushes
29For Sales Call: +1-203-359-4708
Fax: +1-203-359-9601For tools or sizes not shown,consult factory.
BR
USH
ESA
ND
TOO
LS
28
Internally Enhanced Tube Brushes
www.goodway.com
BR
USH
ESA
ND
TOO
LS
Goodway brushes are now soldindividually and in bags of
15 or 25 (depending on brush).
Brushes for Internally Enhanced Tubes
Large Diameter of Brush Cleans Grooves
Small Diameter of Brush Cleans Lands
The”Patriot®” Dual Diameter Nylon Brush Recommended for removing soft deposits (mud,algae, etc.) in straight, ferrous and nonferrous internally enhanced tubes. The large diameter end ofthis brush cleans into the grooves while its small diameter end cleans the lands of the tube’s rifling.ENN-062-Q The “Patriot” Dual Diameter Nylon Brush
for tubes 5⁄8" (15.9mm) I.D. only $5.95 ea. (Available in Bags of 25)
Dual Diameter Spin-Grit Brushes Recommended for removing soft and light scale deposits instraight, ferrous and nonferrous internally enhanced tubes. The small diameter end of this brush cleansinto the grooves while the large diameter end cleans the lands of the tube’s rifling.ESGB-Q-050 Dual Diameter Spin-Grit Brush for tubes 1⁄2" (12.7mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-062 Dual Diameter Spin-Grit Brush for tubes 5⁄8" (15.9mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-075 Dual Diameter Spin-Grit Brush for tubes 3⁄4" (19.1mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-100 Dual Diameter Spin-Grit Brush for tubes 1" (25.4mm) I.D. $5.95 ea. (Available in Bags of 15)
Note: 1⁄4" and 5 ⁄16" (6.4mm and 7.9mm) threaded brushes require a #C-1 Coupling, and 3⁄8" (9.5mm)
threaded brushes require a #C-2 Coupling to connect to GTC-701 Flexible Shafts. (Couplings supplied
with GTC-701 Flexible Shaft order.)
Note: 9 ⁄16"-1" (14.3-25.4mm) brushes can be used for both clockwise and counter-clockwise rotation.
Turbo Tip Helps Dislodge Deposit
Note: All Goodway brushes and buffing tools are
available with standard threaded tool couplings.
To order leave off the “Q” in the part number.
Please check your tube I.D.before placing order.
B
C
A
Tube O.D., I.D., and Gauge (B.W.G.)
A – Tube O.D. is the measured outside diameter of a tube.B – Tube I.D. is the measured inside diameter of a tube.C – Tube Gauge (B.W.G.) is the wall thickness of the tube.
Note: GTC-702Q, GTC-703Q and GTC-704Q Flexible Shafts are availablewith standard threaded tool couplings. To order leave off the “Q” in thepart number.Note: GTC-703, GTC-703Q, GTC-704 and GTC-704 Flexible Shafts for usewith a RAM-5SF Speed-Feed Tube Cleaner require a special shaft stop.To order, add the suffix R5 to the part number and $20.00 to the price.Flexible Shafts (Nylon Casing) for Tubes 1" (25.4mm) I.D. and UpGTC-720-15 Flexible Shaft 15' (4.6m) $310.00GTC-720-25 Flexible Shaft 25' (7.6m) $370.00GTC-720-35 Flexible Shaft 35' (10.7m) $450.00GTC-720-50 Flexible Shaft 50' (15.2m) $525.00