-
Golf Course Management Magazinewww.gcsaa.org October 2014
Offcial Publication of the Golf Course Superintendents
Association of America
GCMINSIDE: Trees and the power of persuasion PAGE 54
TOP GEARTips to keep small engines running like a charm PAGE
44
Grass Roots grand opening 32
Taking stock of your future 80
The buzz about neonicotinoids 86
Digital Inserts_Oct14.indd 3 9/23/14 10:22 AM
-
When failure is not an option.
Always read and follow label directions.Lexicon and Intrinsic
are trademarks and Insignia is a registered trademark of BASF. 2014
BASF Corporation. All rights reser
Today all eyes are on the greenand there cant be a faw in sight.
That
developed Lexicon Intrinsic brand fungicidea foundation product
tha
your toughest diseases by combining the latest in carboxamide
technolog
proven success of Insignia Intrinsic brand fungicide. Its a
cornerstone you can
count on for consistent, longer-lasting protection with
advanced, proven plant health
benefts. We stake our name on itand so can you.
For more information please visit betterturf.basf.us
Digital Inserts_Oct14.indd 1 9/23/14 8:58 AM
-
With all these extra incentives,
youll want to stock up!
Visit betterturf.basf.us/eop for
complete program details, order
forms and savings calculators!
This years EOP is a powerful combination: a simplifed program
with leading innovations. The result? Big savings on solutions that
will keep your turf beautiful and bring you peace of mind. Plus,
dont pay until
June 5, 2015 on agency products.
Innovation Kicker _ give your rebate a boost!
Increase your rebate 2% when you purchase Lexicon Intrinsic
brand fungicide, Honor Intrinsic brand fungicide, Xzemplar
fungicide, or a Cube!
Invoiced DollarsOct. 1 Oct. 31, 2014
Rebate*
Nov. 1 Dec. 12, 2014
Rebate*
$1,500 - $4,999 4% 3%
$5,000 - $14,999 7% 5%
$15,000+ 10% 7%
Earn up to a 12% rebate when you buy in October!
e is not an option.
All rights reserved.
Thats why we
tion product that battles
test in carboxamide technology with the
s a cornerstone you can
proven plant health
Digital Inserts_Oct14.indd 2 9/23/14 8:58 AM
-
Digital Inserts_June14.indd 2 5/23/14 1:45 PM
-
TOUGH TIMES NEVER LAST. GREAT PRODUCTS ALWAYS DO.
Its simple Turfonomics.
Highly productive equipment that performs well under challenging
course conditions is only half the battle. Delivering on the bottom
line during challenging economic conditions is the other half. Look
to Toro for the whole story.
Chapter 3
toro.com/contour
2014 The Toro Company. All rights reserved.
C2-C4_Oct14_ads.indd 2 9/17/14 2:04 PM
-
TOP LINE THINKING
For rough mowing, one size doesnt
ft all, but one company does Toro.
With a choice of four cutting widths,
the Toro Groundsmaster Contour
Rotary family offers a productive
width-of-cut for every job. Each has
innovations youd expect from Toro,
including Contour Plus free-foating
cutting units for reduced scalping in
undulating turf and a picture-per-
fect striped appearance. More than
mowers, theyre the gold standard.
REAL WORLD THINKING
We understand the challenges
you face with rough mowing.
Thats why we make a complete
line-up of innovative contour mowers
that deliver the best overall course
conditions combined with a lower
cost of ownership over time. Then we
back every product we build with our
industry-leading support network.
No one delivers more value than Toro.
Its simple Turfonomics.
Groundsmaster 4500-D/4700-D
Productivity Precision Ease of Maintenance
About Turfonomics
Learn more at:toro.com/turfonomics
The InfoCenterTM displays clear and simple operating information
at a
glance, while constantly monitoring the internal health of the
machine
The challenge today isnt simply to
maintain a beautiful golf course.
Its to maintain it on a budget.
To succeed, you need to work
smarter, more effciently and more
economically than ever before.
Thats why Toro equipment is
engineered to give you not only
great results, but also a lower
cost of ownership over time.
With Toro, beauty and fnancial
sustainability dont have
to be opposites.
Its simple Turfonomics.
The SmartCoolTM System automatically removes chaff and debris
from the
radiator intake screen
BOTTOM LINE THINKING
Groundsmaster Contour Plus mowers
lower costs by raising productivity.
With a maximum mowing productivity
ranging from 7.6 to 10.5 acres per
hour, the Groundsmaster 4500-D
and 4700-D make short work of
rough mowing. An InfoCenter for
diagnostics and servicing helps reduce
machine downtime. Both machines
also feature SmartPower for
consistent cutting in all conditions,
plus our exclusive SmartCool
system that automatically
blasts debris from the air
intake screens when
the engine
gets hot.
9/3/14 11:35 AM001-009_Oct14_ads.indd 1 9/17/14 1:55 PM
-
Think people dont notice the accessories?
On a golf course every detail is important. So make
sure your accessories work as hard as you do to
enhance the image of your golf course.
Wherever golf is played.
001-009_Oct14_ads.indd 2 9/17/14 1:55 PM
-
The right accessories improve course conditions and make golfers
want to come back for more.
More than ever, you have to wow golfers with your golf course.
Thats because the No. 1
reason golfers give for not returning to a golf course is poor
course conditions. But theres
more to course conditions than greens, tees, fairways and
bunkers. Consider accessories
something golfers see, touch and feel on every hole.
Having well maintained, proper golf course accessories is a
crucial part of course conditions.
They make an important and lasting impression on golfers and
reinforce the courses (and
your) reputation. Quality accessories from Par Aide can improve
course aesthetics and
playability while saving you time and money. Find out how we can
make your accessories
budget work harder than ever.
P A R A I D E . C O M 8 8 8 - 8 9 3 - 2 4 3 2
001-009_Oct14_ads.indd 3 9/17/14 1:55 PM
-
Trusted by the best courses on Earth.
The New A Model Mowers from John Deere.
Now your presence can be felt on every part of your course.
Thats the control you get with the new
A Model mowers from John Deere. Thanks to our TechControl
display, no matter who is operating
the mower, you can easily program these mowers to mow and turn
at exact speeds, to transport
at preset speeds, and to lock in fuel savings. You can also plug
in service reminders and get diagnostic
feedback quickly and accurately. And all of your operators can
now perform in a more consistent fashion.
The power to control your course is now in your hands. To fnd
out more about our new A Models,
contact your local John Deere Golf distributor today or sign up
for a demo at JohnDeere.com/Demo.
001-009_Oct14_ads.indd 4 9/17/14 1:55 PM
-
60915
JohnDeere.com/Demo
Control like this has always been out of reach. Until now.
Our exclusive, pass code-protected TechControl Display
lets you program commands for your operators.
001-009_Oct14_ads.indd 5 9/17/14 1:55 PM
-
001-009_Oct14_ads.indd 6 9/17/14 1:55 PM
-
001-009_Oct14_ads.indd 7 9/17/14 1:55 PM
-
001-009_Oct14_ads.indd 8 9/17/14 1:55 PM
-
001-009_Oct14_ads.indd 9 9/17/14 1:55 PM
-
10 GOLF COURSE MANAGEMENT 10.14
CONTENTS10.14
44
54
64
74
Ready to roll, push or pullA small-engine expert
offers tips for year-round
maintenance.
Dale Gabrielse
Compelling forceRemoving hazardous trees at
the golf course is often a hard
sell. Harness the power of
persuasion to convince
stakeholders to take action.
John C. FechSaving a giantBiological predators of the
hemlock woolly adelgid are
saving hemlocks at Grandfather
Golf & Country Club in
Linville, N.C.
Kate Cahow
Remodeling road mapConsidering a golf course
renovation? Master planning is
a key step that marries the wants
and needs of the facility with the
architects ability to deliver on
those expectations.
Raymond Hearn
80 Mirror, mirror: Facing your future in the golf industry
Industry veterans offer advice for steering a career course in
changing times. Anthony L. Williams, CGCS On the Cover: Photo by
Alex Mit/Shutterstock.com
010-015_Oct14_TOC.indd 10 9/17/14 1:56 PM
-
010-015_Oct14_TOC.indd 11 9/17/14 1:56 PM
-
12 GOLF COURSE MANAGEMENT 10.14
INSIGHTS
Neonicotinoid insecticides and pollinators: Whats all the buzz
about?Pesticide applicators should take precautions to protect
pollinators from potential danger.
Doug Richmond, Ph.D.
Aaron Patton, Ph.D. Cutting EdgeTeresa Carson86
RESEARCH
94
16 Presidents message
18 Inside GCM
20 Front nine
30 Photo quiz
84 Through the green
96 Verdure
98 Product news
102 Industry news
106 Climbing the ladder
106 On course
107 Coming up
109 On the move
108 In the field
113 New members
114 In memoriam
120 Final shot
ETCETERA10.14
34ShopAvoiding damage when
chain grinding
Scott R. Nesbitt
AdvocacyAct now, vote later
Kaelyn Seymour
TechnologyTaking the technology
plunge
Bob Vaughey, CGCS
WaterThe natural
Bunny Smith
Act now, vote later
36Taking the technology
403832TurfBack to our roots
Geoffrey Rinehart
010-015_Oct14_TOC.indd 12 9/17/14 1:56 PM
-
Now available from FMC.Ask your FMC Market Specialist or local
turf distributor about Early Order Program discounts today.
Always read and follow label directions. DISARM and DISARM logo
are registered trademarks of Arysta LifeScience North America, LLC.
The Xylem Pro Technology
slogan is a trademark of Arysta LifeScience North America, LLC.
FMC is a trademark of FMC Corporation. 2014 FMC Corporation. All
rights reserved.
@FMCturf FMC Turf
fmcprosolutions.com
Protect your turfgrass with DISARM fungicides. Within 15
minutes, the Xylem Pro Technology
penetrates leaf tissue and begins to control and prevent
diseases.
Get stronger, longer roots and healthier turfgrass overall.
Premium strobilurin protection
010-015_Oct14_TOC.indd 13 9/17/14 1:56 PM
-
GCSAA BOARD OF DIRECTORS
President KEITH A. IHMS, CGCS
Vice President JOHN J. OKEEFE, CGCS
Secretary/Treasurer PETER J. GRASS, CGCS
Immediate Past President PATRICK R. FINLEN, CGCS
Directors RAFAEL BARAJAS, CGCS
DARREN J. DAVIS, CGCS
JOHN R. FULLING JR., CGCS
MARK F. JORDAN, CGCS
BILL H. MAYNARD, CGCS
Chief Executive Offcer J. RHETT EVANS Chief Operating Offcer
MATT SHATTO Chief Business Development Offcer J.D. DOCKSTADER
GCM STAFF
Editor-in-Chief SCOTT HOLLISTER
[email protected]
Sr. Managing Editor BUNNY SMITH
[email protected]
Sr. Science Editor TERESA CARSON
[email protected]
Associate Editor HOWARD RICHMAN
[email protected]
Sr. Manager, Creative Services ROGER BILLINGS
[email protected]
Manager, Creative Services KELLY NEIS
[email protected]
Traffc Coordinator BRETT LEONARD
[email protected]
GCSAA This Week/Turf Weekly
Editor ANGELA HARTMANN [email protected]
ADVERTISING 800-472-7878
Managing Director MATT BROWN
Marketing and Business Development [email protected]
Sr. Manager, Business Development JIM CUMMINS
[email protected]
Lead International Developer ERIC BOEDEKER
[email protected]
Account Development Managers BRETT ILIFF
[email protected]
KARIN CANDRL
[email protected]
SHELLY URISH
[email protected]
GCM MISSION
Golf Course Management magazine is dedicated to advancing the
golf course superin-tendent profession and helping GCSAA members
achieve career success. To that end, GCM provides authoritative
how-to career-oriented, technical and trend information by industry
experts, researchers and golf course superintendents. By advancing
the profes-sion and members careers, the magazine contributes to
the enhancement, growth and vitality of the game of golf.
The articles, discussions, research and other information in
this publication are advisory only and are not intended as a
substitute for specifc manufacturer instructions or training for
the processes discussed, or in the use, application, storage and
handling of the products mentioned. Use of this information is
voluntary and within the control and discretion of the reader. 2014
by GCSAA Com-munications Inc., all rights reserved.
President KEITH A. IHMS, CGCS
Vice President JOHN J. OKEEFE, CGCS
Secretary/Treasurer PETER J. GRASS, CGCS
Immediate Past President PATRICK R. FINLEN, CGCS
Directors RAFAEL BARAJAS, CGCS
DARREN J. DAVIS, CGCS
JOHN R. FULLING JR., CGCS
MARK F. JORDAN, CGCS
BILL H. MAYNARD, CGCS
J. RHETT EVANS
MATT SHATTO
J.D. DOCKSTADER
Editor-in-Chief SCOTT HOLLISTER
[email protected]. Managing Editor BUNNY SMITH
[email protected]. Science Editor TERESA CARSON
[email protected] Editor HOWARD RICHMAN
[email protected]. Manager, Creative Services ROGER
BILLINGS
[email protected], Creative Services KELLY NEIS
[email protected] Coordinator BRETT LEONARD
[email protected]
GCSAA This Week/Turf Weekly
Editor ANGELA HARTMANN
[email protected]
Managing Director MATT BROWN
Marketing and Business Development [email protected] Sr. Manager,
Business Development JIM CUMMINS
[email protected] International Developer ERIC BOEDEKER
[email protected]
Account Development Managers BRETT ILIFF
[email protected]
KARIN CANDRL
[email protected] SHELLY URISH [email protected]
Golf Course Management MagazineOffcial Publication of the Golf
Course Superintendents Association of America
endoROOTS Granular
Mycorrhizal Rooting
Stimulant
Help your turf recover from aerifcation with
endoROOTS. Containing a balanced blend of
vitamins and mycorrhiza, endoROOTS
signifcantly increases the root systems ability to take
up valuable nutrients, water, and recover. To fnd out
more, call or visit us online.
Best of all Worlds
www.LebanonTurf.com 1-800-233-0628
010-015_Oct14_TOC.indd 14 9/17/14 1:56 PM
-
Best of All Worlds
1-800-233-0628
www.countryclubmd.com
You spoke. We listened.
In answer to feedback from superintendents worldwide, our four
new Country Club MD
greens grade fertilizers contain phosphorus for those golf
course managers who need to
include P in their greens nutrition program.
Ask your sales representative for more information about Country
Club MD.
010-015_Oct14_TOC.indd 15 9/17/14 1:56 PM
-
16 GOLF COURSE MANAGEMENT 10.14
Family reunions elicit different responses from different
people.
For some, theyre events to be looked upon with dread, to simply
be endured. Spending a few days with Uncle Bill isnt everybodys cup
of tea, so many folks simply grit their teeth and try to make it
through family reunions with as little trouble as possible.
For others, though, family reunions are the highlight of the
year, cherished opportunities that dont come around often enough. I
know I count myself in this category; when my ex-tended family
comes together to reconnect and reminisce about old times, its an
occasion to remember and one that I wont miss.
Ive been reminded of all the best parts of these family reunions
as Ive prepared myself for this months chapter delegates meeting at
GCSAA headquarters in Lawrence, Kan. The chapter delegates meeting
is one of our associations most important gatherings of the year,
but it also is one of our most mis-understood. When members ask me
to tell them more about these crucial meetings, Ive often referred
to them as a family reunion for GCSAA, only with a heavy dose of
serious business tossed in for good measure.
This meeting is an annual opportunity for your national board of
directors and members of the GCSAA staff to touch base with
repre-sentatives from all 98 of the associations af-fliated
chapters. Some of those representatives are familiar faces who have
served their chap-ters for many years, while others are new
vol-unteers getting their frst taste of involvement at this level.
Regardless of which camp they fall into, the chance to interact and
share with these representatives in an environment like the chapter
delegates meeting is invaluable.
But this meeting is not a one-way street. In fact, its most
valuable aspect is that the chapter representatives share ideas and
concerns from their respective regions. As much as we try to keep
our fngers on the pulse of the local and regional issues facing our
members, there is no substitute for hearing about those issues from
superintendents who are living them each and every day. These
messages give your national association a clearer idea of where to
place its priorities and exactly what efforts it should
undertake on behalf of its members. Its a criti-cal part of
chapter delegates meetings, and one I take extremely seriously.
This month, attendees will learn about and be asked to provide
feedback and guidance on a host of matters important to the future
of GCSAA. For example, theyll tackle the Rounds 4 Research
initiative, getting in-depth information on the outcomes from this
years Rounds 4 Research auctions, which raised nearly $150,000
overall, and helping to chart the future of that important
program.
Chapter delegates also will be asked for their views on a number
of issues related to membership in GCSAA: hearing from candi-dates
for next years elections for the national board of directors,
discussing a wide range of matters related to membership standards
and classifcations and sharing opinions on the ideal structure and
organization for the associations national leadership. And theyll
also discuss the future growth and mission of GCSAA, how it will
look 10 years from now and how we can position it for the future
and ensure it continues to be an important repre-sentative for the
entire golf course manage-ment industry.
These are weighty issues, to be sure. But recent history has
shown that our chapter del-egates are more than up to the task of
tackling these issues and charting a course for GCSAA. And the fact
that these meetings also allow us the opportunity to catch up with
members that we might see only a few times over sev-eral years is
just another happy beneft from a meeting that is increasingly
crucial to the on-going success of your association.
Keith A. Ihms, CGCS, is the golf course maintenance man-
ager at Bella Vista (Ark.) Village and a 33-year member
of GCSAA.
Keith A. Ihms, CGCS
[email protected]
A meeting of the minds
As much as we try
to keep our fngers
on the pulse of the
local and regional
issues facing our
members, there
is no substitute
for hearing about
those issues from
superintendents
who are living them
each and every day.
(presidents message)
016-017_Oct14_PresMess.indd 16 9/17/14 1:57 PM
-
016-017_Oct14_PresMess.indd 17 9/17/14 1:57 PM
-
18 GOLF COURSE MANAGEMENT 10.14
June 17, 2014.You may or may not remember what you
were doing that day. I do. You could fnd me on the grounds of
Pinehurst No. 2 for the Womens U.S. Open. In time, though, it
proved to be a signifcant day for me for other reasons. I was not
alone. It certainly had an affect on two families and who knows how
many others.
Part of my job includes compiling informa-tion for our In
Memoriam section of GCM. Here is how that works: Becky Downing, our
senior data integrity specialist at GCSAA, sends me obituary
notices of deceased members in an interoffce envelope that is
delivered to our de-partment on the fourth foor of the GCSAA
headquarters building in Lawrence, Kan.
It is my duty to compose what will appear. Sometimes the
deceased may have passed away as long ago as 18 months. Or it could
be six weeks. There is no question this is sensitive stuff, to be
handled with care. Proud families who want to remember their loved
ones often will re-quest multiple copies of GCM as keepsakes.
For the families and friends of Ernie Hayes and Aylor Rogers,
June 17 always will be cir-cled on their calendars.
A few weeks ago, I received their obituar-ies. Usually the frst
things I look at are years of membership and date of death. What
ini-tially caught my eye was that both Hayes and Rogers died on the
same day. June 17. Soon I learned they had more in common than
pass-ing away that day.
In Downings notes to me, she let me know that Hayes and Rogers
were best friends.
They were different personalities, Mi-chael Hayes, Ernies son,
told me. Dad was a little bit quieter. Aylor was outgoing and
boisterous. But they were big buddies. Aylor had heard about Dads
golfng prowess. Thats when they fnally met up to check out each
others golfng skills.
Their paths frst crossed in the Carolinas. Hayes, a 40-year
member of GCSAA, had ev-erything to do with Land Harbor Golf Club
in Linville, N.C. He was there for the frst day in 1969 and later
designed and constructed the back nine. Rogers, a 47-year member of
GCSAA, spearheaded the construction of
Grandfather Golf & Country Club in Lin-ville. Only about 10
minutes separated these two men whose friendship seemed
insepara-ble. Their families would gather at one of their homes on
occasion, which was another sign of how much they meant to one
another.
They kind of seemed like brothers, says Brenda, Aylors wife.
They were very close. They would go on golf trips together. They
were just very, very close.
Hayes and Rogers were instrumental in shaping their profession
in North Carolina. Hayes was a founding member of the West-ern
North Carolina Turfgrass Association. Six years ago, it named its
scholarship endowment in his honor. Rogers was a lifetime member of
the North Carolina Turfgrass Council.
In their later years, Hayes and Rogers were unable to meet and
greet each other as often as they would have liked. Michael Hayes,
25-year GCSAA Class A member and op-erations manager at Land
Harbor, thinks the last time they saw each other in person was at
Ernie Hayes 85th birthday party. Still, they would talk on the
phone. Even that, however, became more diffcult in their twilight.
Ernie Hayes suffered from dementia in recent years.
On the morning of June 17, Aylor Rogers passed away. He was 90.
Later that evening, Ernie Hayes passed away. He was 91. The Rogers
family phoned the Hayes family. That is when each of them learned
that these two men, signifcant in the golf course industry and the
fber of their families, had died.
At frst, it was kind of a shock, Michael Hayes says, but then I
just fgured that it was divine intervention that they had to make a
tee time together.
Brenda Rogers thought something similar. I know theyre up there
having a good time, talking about golf, she says.
The families requested that their In Me-moriam notices appear in
the same issue. So, on Page 114, GCM has honored their request.
Actually, it is our honor. I never met either man. Somehow, though,
I expect whenever June 17 rolls around, I will think of them.
Howard Richman is GCM s associate editor.
Howard Richman
[email protected]
twitter: @GCM_Magazine
A matter of life and death
(inside gcm)
Aylor Rogers (left) and Ernie Hayes
018-019_Oct14_IGCM.indd 18 9/17/14 1:58 PM
-
LM 315TriPlex
GREENSMOWER
Contact Your Local Baroness Dealer!
018-019_Oct14_IGCM.indd 19 9/17/14 1:58 PM
-
His football teams possess a record that would make even Nick
Saban smile. What truly makes
him happy, though, is what plays out on the golf course.
John McCarthy, CGCS, is not necessarily facing a mid-life
crisis. In this era of economic and
job-related uncertainty, though, it is life. At what now is
considered a temporary position as interim
superintendent at Painted Dunes Desert Golf Club in El Paso,
Texas, McCarthy is hundreds of miles
from the gridiron that his team in Georgia has, arguably,
dominated.
McCarthy, 44, fnds himself in West Texas by design. And a need
to support his family, which
includes an Olympic-caliber swimmer and a quarterback in the
making, still based in Georgia. He
landed at Painted Dunes when they needed a superintendent and he
needed a job. After nine years
at Crystal Falls Golf Club in Dawsonville, Ga., McCarthy says
they told him they wanted to go a new
direction and let him walk.
It is a familiar scenario in the industry. Any industry,
really.
You never know what can happen. It ( job issues) hits everybody.
It doesnt discriminate, McCar-
thy says. This (superintendent job) is what pays the bills.
He also works in a profession where networking is in the fabric.
Among those who put the wheels
in motion to restart McCarthys career is Tenia Workman,
executive director of the Georgia GCSA.
She contacted past GCSAA President Dave Downing II, vice
president at Golf Maintenance Solutions.
There he serves as agronomist for the Southeast region. He
helped place McCarthy at Painted Dunes.
Transition (end) zone
Photo by Ruben R. Ramirez
020-029_Oct14_Front9.indd 20 9/17/14 1:59 PM
-
020-029_Oct14_Front9.indd 21 9/17/14 1:59 PM
-
By the
NUMBERS
John
has desert and warm-
and cool-season grass
experience, says Downing,
GCSAA president in 2008. Its
been a win-win situation so far.
Winning is a common denominator in
McCarthys family. His Midway Wolverines youth
football team in Forsythe County, Ga., won 36 games
in a row in one stretch and recorded two champi-
onships. His defense was like the 1985 Chicago
Bears, la William Refrigerator Perry, allow-
ing zero points in the frst 17 games in that win-
ning streak.
Now, McCarthy, who attended the University of
Massachusetts Stockbridge School of Agriculture,
coaches the middle school team at Pinecrest Academy,
a private Catholic school in Georgia. In his frst three sea-
sons entering this year, McCarthys teams posted winning
records each season. An opportunity to shape youngsters
drives McCarthy.
The game is about having heart, soul and pushing
yourself to the next level and fnding what that level is,
he says.
His son, Ryan, seeks that next level. He appears to be
on a good path. Ryan, only a sophomore, is the starting
quarterback for the Pinecrest Academy Paladins varsity
team. At 6-feet-3, 190 pounds, the younger McCarthy
has the size that should make recruiters drool if he shows
promise. Schools such as Boston College and the Univer-
sity of Pennsylvania already have shown interest.
He wasnt the frst standout athlete in this family.
Johns wife, Karen produced some pretty special creden-
tials in her day. In her youth when she was known as Karen
Brewer, she qualifed for the Olympic Trials in the back-
stroke at the age of 15. She thinks her husband is talented
on multiple fronts.
John loves the outdoors and takes great pride in
his work on the golf course, says Karen, who was an All
American swimmer at Florida Atlantic University. He also
has a great love for children. He not only coaches them in
football but in life. He wants each boy to be a well-rounded
individual. He always puts the person frst but takes great
pride in his wins.
Ultimately, Karen says, her husband places family frst.
His greatest achievement is that he has been able to
balance his work, his coaching and his family, she says.
Since McCarthy is in El Paso, his assistants help him
during the week until Fridays when McCarthy returns to
coach that middle school team at Pinecrest Academy.
Asked if he would be willing to leave behind the job of a
superintendent position to be a football coach, McCarthy
wouldnt completely rule it out. Yet the passion for the pro-
fession that he developed as a 15-year-old working on the
course in summer hasnt faded.
The scenery out on the golf course changes every
day. Therefore your life does, McCarthy says. I love to
impact lives of our football players and I feel the same way
about making an impact in my profession. Its what I do.
Howard Richman, GCM associate editor
Turf Science Live pops up in the Midwest
Editors note: This report was fled by Luke Cella,
CGCS, Midwest Association of Golf Course Superinten-
dents. Accompanying photo above.
Four cornerstone companies of the turf industry came
together recently and put on Turf Science Live in Liber-
tyville, Ill. The second edition of the event in the United
States was held at the Merit Club and hosted by superin-
tendent John Nelson. Last year, the U.S. event was held at
Greenville Country Club in South Carolina. On both occa-
sions, the organizers followed a format that has garnered
considerable support in the United Kingdom since 2010.
Turf Science Live is similar to many demonstration
and research feld days except each exhibit involves an
in-depth and interactive discussion on the science, tech-
nology and application that brought the particular product
22 GOLF COURSE MANAGEMENT 10.14
NUMBERS
22 GOLF COURSE MANAGEMENT 10.14
Jeff Churchill (middle) and Steven Johnson (right) of Smithco
take apart the solenoid from a spray nozzle component and point out
the wear indicator to Merit Club superintendent John Nelson (left).
Photo by Luke Cella, CGCS
Shop math 101: converting to metricType the numerator (top
number) of the
fraction from the standard tool into your calculator and divide
it by the denominator (bottom number). For
example, with a -inch standard size
=0.25
socket, divide the 1 by the 4 and get a result of 0.25 inch.
Type the resulting decimal fgure into your calculator and
multiply it by 25.4, which is the number of millimeters in 1
inch. The standard size
of 0.25 inch multiplied by 25.4 equals a metric size of 6.35
millimeters, for
example. Round up the resulting metric fgure to the nearest
metric size. From the example, 6.35 millimeters rounds up to
a metric size 6.5 millimeter socket.
Source: ehow.com
0.25 X 25.4=6.35
round up
6.5 mm
+
=
020-029_Oct14_Front9.indd 22 9/17/14 1:59 PM
-
020-029_Oct14_Front9.indd 23 9/17/14 1:59 PM
-
24 GOLF COURSE MANAGEMENT 10.14
to market. Superintendents from the Midwest were invited
to participate in the daylong event with their local sales
representatives. It was a learning opportunity, where both
groups got to hear and see new technologies in action.
Turf Science Live was developed as an opportunity
for superintendents to network and to build relationships
throughout the day, says David Withers, president of
Jacobsen. The event is advertised to superintendents as
a hands-on opportunity to interact with leading special-
ists in many aspects of turf management demonstrating
techniques that can be used to improve conditions at the
411411The
411411
golf course.
Technology applied to the trade of greenkeeping sets
out to improve conditions, often by reducing inputs and
allowing superintendents greater control of the environ-
ment under their care. As products advance, superinten-
dents require more-specifc knowledge to use them to the
fullest. Turf Science Live sets out to provide that knowl-
edge. Attendees have the opportunity to learn to use new
technologies from product developers and specialists in a
hands-on setting.
Long gone are the days of factory settings, when a
new product was set up and rarely adjusted by the con-
sumer. Now, products are designed, and manufactured,
to be adjusted, sometimes on the fy, as shown by Chris
Fox and the team from Jacobsen. Fox explained the re-
lationship between frequency of clip and mowing height
and their combined impact on ball roll. During his demon-
stration, he showed how superintendents are able to in-
crease ball roll while raising the height of cut by
increasing
the frequency of clip. Turf managers know that raising the
height of cut leads to greater photosynthetic surface area
and ultimately a healthier stand of turf.
In the turf industry, it has long been thought that su-
perintendents on the purchasing side have little to learn
from sales people. Turf Science Live is changing the way
superintendents see manufacturers and their sales staff.
Technology may set out to make things better, but applying
that technology is not always simpler. Our industry is at a
tipping point where end users must learn about products
and processes from those who have the most knowledge
about them.
GCSAA Legacy Award recipients announced
Nineteen $1,500 scholarships have been awarded as
part of GCSAAs Legacy Awards administered through its
philanthropic organization, the Environmental Institute for
Golf and funded by Syngenta.
The recipients are, including GCSAA member rela-
tive: Taylor Archibald, Michigan Technological University
(Steve Archibald); AnnMarie Backstrom, College of Saint
Benedict (Jeffery C. Backstrom); Courtney Doxtader, State
University of New York-Canton (the late Gene Taylor); Lily
Ellis, University of Buffalo (Howard C. Ellis, CGCS); Ryan
Fackler, Azusa Pacifc University (Steve N. Fackler, CGCS);
Kelsey Gabel, University of Illinois-Chicago (Charles C.
Dipman); Caitlin Greninger, University of Wyoming (Mi-
chael A. Greninger, CGCS); Amanda Gross, Northeastern
University (Douglas C. George).
Maggie Henderson, University of Tennessee (Wil-
liam J. Henderson III); OChun Jones, Clemson University
(Shaun Donahue); Molly Brown Langner, University of Al-
abama-Birmingham (Mark Langner); Alyssa Merkel (Uni-
versity of Nebraska-Lincoln (Steven A. Merkel, CGCS);
Grant Wood Nair, Ohio State University (Scott W. Nair);
Benjamin Naudet, University of Kansas (Paul Naudet);
020-029_Oct14_Front9.indd 24 9/17/14 1:59 PM
-
020-029_Oct14_Front9.indd 25 9/17/14 1:59 PM
-
26 GOLF COURSE MANAGEMENT 10.14
Toros Ryder Cup roleWhen Gleneagles played host to last months
Ryder
Cup in Scotland, The Toro Co. had a key presence.
Gleneagles extended their partnership with Toro as
the exclusive provider of turf maintenance equipment.
That includes Toros Greensmaster Flex 21s for the greens,
Greensmaster 1600s for the tees, Reelmaster 5410s for
the fairways and Reelmaster 3100s for the intermediate
and surrounds.
Jack Nicklaus was a consultant for Gleneagles as
it embarked on renovations pre-Ryder Cup. No. 18 was
completely rebuilt, a large lake was installed along No. 9,
and bunkers were rebuilt. The renovations featured about
50,000 tons of earth being shifted. The courses irriga-
tion system added the Toro DT Series sprinklers. And, to
ensure the fairways were frm and dry for the Ryder Cup,
Gleneagles superintendent Steve Chappell and his team
applied more than 10,000 tons of sand to the fairways.
That gave the course a 50-millimeter sand profle on top of
what already was there.
Garske grants awardedGCSAA awarded its 2014 Joseph S. Garske
Collegiate
Grants to fve students: Grant Wood Nair, Parker Esoda,
Jacob Schaller, Abigail Gullicks and Colby Tarsitano.
The Garske Grant was established in honor of Par Aide
company founder Joseph S. Garske. It is funded by Par
Aide, a golf course accessory company, and administered
by the Environmental Institute for Golf. The program as-
sists children and stepchildren of GCSAA members to fund
their educations at an accredited college or trade school
with one-time, one-year grants awarded to fve recipients
without renewal. Grants are based on community service,
leadership, academic performance and a written essay.
Nair, who will attend Ohio State University, earned
$2,500. His father is Scott W. Nair, superintendent at
Kukio Golf Club in Kailua-Kona, Hawaii. Esoda will attend
the University of South Carolina. She earned $2,000. Her
father, Mark Esoda, CGCS, is at Atlanta Country Club
in Marietta, Ga. Schaller earned $1,500 and will attend
the University of Wisconsin-Madison. His father, Scott H.
Schaller, CGCS, is at North Shore Golf Club in Chilton, Wis.
Gullicks earned $1,000 and will attend the University
of St. Thomas. Her father is Class A superintendent Wil-
liam Gullicks of Bellwood Oaks Golf Course in Hastings,
Minn. Tarsitano, who will attend New York University,
earned $500. His father, Gerald A. Tarsitano II, CGCS, is
at The Hideaway Golf Club in Indio, Calif.
Student essay contest winners announced
Three college students were winners in the 2014
GCSAA Student Essay Contest.
Jesse J. Benelli, James W. Hempfing and Derek
Pruyne were honored. Hempfing, a frst-year Ph.D. stu-
dent at Rutgers University, received the top award of
$2,000 for his essay Lines drawn in the sand: The evolu-
tion of topdressing practices.
The second-place award went to Benelli, a frst-year
Ph.D. student at the University of Tennessee. Benelli,
awarded $1,500, wrote a paper titled Strobilurin fungi-
cides: Historical perspectives and implications on plant
health. Pruyne, in his second year of pursuing a masters
degree at Penn State University, claimed third place and
$1,000 for his essay, Assessing and optimizing soil pH of
creeping bentgrass putting greens.
Judges from GCSAAs essay task group selected
the winners. The student essay contest scholarships are
funded by the Environmental Institute for Golf through the
Robert Trent Jones Endowment.
Deadline looms for Bayer program
October 10 is the deadline for superintendents to
apply for Bayers second annual Healthy Turf, Healthy To-
morrow Plant Health Scholarship.
Two superintendents will each receive a $2,500
scholarship to continue their education in the area of plant
health as part of the Healthy Turf, Healthy Tomorrow pro-
gram developed by Bayer in collaboration with the Environ-
Gleneagles, which hosted last months Ryder Cup, was assisted in
its preparations by equipment from The Toro Co. Photo courtesy of
Toro
Letter to the editor
Dear Editor:
I, and no doubt many other GCM readers, was
surprised and disappointed to see that GCM has ev-
idently begun publishing blatantly advertorial pieces.
Specifcally, the fve-page article in the August GCM
(Save the sand, Page 72) was obviously written by
the manufacturer of the featured product with abso-
lutely no mention of any competing/alternative prod-
uct solutions.
The tone of this article is incredibly biased, in my
opinion, and a disservice to your readers, as well as
competitors in the same market niche compet-
itors who have been providing quality, long-lasting
bunker-liner solutions for nearly two decades. Did this
specifc piece meet GCM s own editorial standards
and guidelines regarding preferential endorsements
of commercial products?
A sincere attempt to balance the ledger here
might include GCM publishing a comprehensive fol-
low-up article on bunker lining systems. This new ar-
ticle can include detailed info, pros and cons, and tes-
timonials on all other interested liner companies. This
follow-up effort would allow your readers to know the
full story on bunker-liner options before making their
own fully informed decisions. That would truly be
more consistent with the overall purpose of GCSAA
and GCM, would it not?
Bob McCormick
President
Klingstone Inc. by Sunburst Management Group Inc.,
its Agent
Editors note: GCM regularly publishes stories pro-
vided by or sourced from companies who do business
in the golf course management industry, but these
stories must meet very strict editorial standards and
guidelines prior to publication. Regrettably, the story
in question did not meet those standards and guide-
lines. Because of this error in judgment, GCM staff
are re-examining policies regarding industry-supplied
editorial content and will publish a product spotlight
story on bunker-liner options for superintendents in
the November issue of the magazine.
Tyler Powell, University of North Carolina (Brian Powell,
CGCS); Jake Schaller, University of Wisconsin (Scott H.
Schaller); Colby Tarsitano, New York University (Gerald A.
Tarsitano II, CGCS); Kurt Van Auken, Western Technical
College (David Van Van Auken); and Kara C. Wojick, Uni-
versity of Connecticut (Gregory J. Wojick).
020-029_Oct14_Front9.indd 26 9/17/14 1:59 PM
-
020-029_Oct14_Front9.indd 27 9/17/14 1:59 PM
-
28 GOLF COURSE MANAGEMENT 10.14
On the job
A sports editor in Wisconsin was superintendent
for a day at GCSAA Class A member Tim Wegners
course. See how it turned out at OnMilwaukee.com.
http://onmilwaukee.com/sports/articles/shiftswitch-
golfcoursesuperintendent.html?38592
Illinois country club to play on
Itasca (Ill.) Country Club has been around for
nearly 90 years. The Daily Herald tells us why it will
be around for a while longer. www.dailyherald.com/
article/20140908/news/140908624/
Restoration project
Andrew Hall, a gardener in the United Kingdom,
spent four years restoring a more than 100-year-old
lawnmower. Read all about it in the Daily Mail. www.
dailymail.co.uk/news/article-2718878/Worlds-mo-
torised-lawnmower-restored-former-glory-centu-
ry-invented-ultimate-rich-mans-toy-costing-equiva-
lent-15-000.html
Tweets
RETWEETS
In the
NEWS
mental Institute for Golf (EIFG).
Scholarship recipients may use the award to attend
local, regional or national education conferences or to en-
roll in continuing education programs at an institution of
higher learning. To apply, go to www.backedbybayer.com/
healthy-turf.
Navarre earns top scholar award
Didnt somebody once say youre never too old?
Meet Gerry Navarre. This 54-year-old Michigan
State University student, pursuing a second career in turf
management, earned the top prize of $6,000 among 14
awards in the 2014 Scholars Competition offered through
GCSAA. The award is called the Mendenhall Award,
named in honor of the late Chet Mendenhall, who was a
charter member of GCSAA.
Navarre spent 25 years in fnancial consulting and
mortgage services before reconsidering his career choice.
It (award) is a big deal to me. Its going to take a load of
fnancial stress off since I have a 20-year-old in college
as well. I worked on a golf course for seven years during
high school and college and I loved it. It would have been
a tremendous career path the frst time around, but its not
too late to start.
The second-place award went to Christopher Marra,
21, of Penn State University. He received $5,000. Marra
received the MacCurrach Award, named in honor of the
late Allan MacCurrach, who was the PGA Tours frst
staff agronomist in 1974 and was GCSAAs Distinguished
Service Award recipient in 1997. The PGA Tour funds
the award.
Navarre and Marra receive an all-expenses-paid trip to
the 2015 Golf Industry Show in San Antonio. Other award
winners are:
Teddy Norman, University of Massachusetts-Am-
herst, $2,500; John Petrovsky, Penn State University,
$2,500; Morgan Robins, Penn State University, $2,000;
Richard Plemel, Rutgers University, $2,000; Sean Kelly,
Penn State University, $2,000; Travis Russell, University
of Arkansas, $2,000; Michael Wright, Michigan State Uni-
versity, $1,500; Andres Johansson, Michigan State Uni-
versity, $1,500; Justin Hickman, Mississippi State Univer-
sity, $1,000; Matthew Herrmann, Penn State University,
$1,000; Benjamin Cibotti III, Penn State University, $500;
and Robert Bond, Penn State University, $500.
Recipients were selected by the GCSAA Schol-
ars Competition Task Group. Criteria include academic
achievement, potential to become a leading industry
professional and employment history. Applicants must
be enrolled in a recognized undergraduate program in
a major feld related to golf/turf management and be a
GCSAA member.
The $30,000 program is funded by the Robert Trent
Jones Endowment and administered by GCSAAs philan-
thropic organization, the Environmental Institute for Golf.
It
was developed to recognize outstanding students planning
careers in golf course management.
Rounds 4 Research totals six fgures
The fnal numbers are in: $145,339 was raised in the
Rounds 4 Research fundraising program this summer.
A second phase of Rounds 4 Research took place
in August. The program, to raise funds for turfgrass re-
search, totaled more than 200 rounds sold for $30,891
in a seven-day online auction. In the frst round in June,
nearly $115,000 was raised for the program that is run by
the Environmental Institute for Golf.
The Metropolitan GCSA led the way in August with
more than $4,000 raised among the 40 fundraising part-
ners that donated rounds for turfgrass research at the local
level. The top bid for a tee time for four golfers was
$1,480
for the chance to play Valhalla Golf Club in Louisville,
Ky.,
site of this years PGA Championship. A stay-and-play
package at French Lick (Ind.) Resort sold for $1,650.
The Toro Co. supports the program with a $50,000 do-
nation. Since being launched in 2012, Rounds 4 Research
has raised more than $320,000. Eighty percent of the money
raised is returned to the local chapters for turf studies.
John Galbraith @VAsoilguyThe Science of Soil Health:
Rhizode-position - what plants put into the soil through their
roots...http://youtu.be/xgy9ArBpNiI
East lake Agronomy @eastlake1904_Very busy morning! Early tee
times to avoid storms. We came we saw we conquered! Very lucky to
have great vol-unteers. pic.twitter.com/5T0s83Ws6Q
Jon Hungerford @TCI_TurfgrassWe go from having pythium in our
rough on Monday to possible frost tomorrow morning. Gotta love Iowa
weather. #frostdelayssuck #gameday
Andy OHaver @andyohaverHappy Friday! #hydraulic
pic.twitter.com/G1iaHEiP8W
Mitch Davidson @MitchDavyHeavy morning frost means taking our
full turf care team of 7 members out for breakfast at whifs #team
pic.twitter.com/u1bucWVw28
Adam Breitenfeldt @AdamBfeltNice day to put down some nitrogen
and ferrous sulfate! #offcewithawindow
Jim Brosnan, Ph.D. @UTTurfWeeds@utgroundscrew talking to
#UT-TurfFD14 attendees about feld mainte-nance at Neyland Stadium,
home of the #Vols #vf
020-029_Oct14_Front9.indd 28 9/17/14 1:59 PM
-
f u n g i c i d e& i n s e c t i c i d e
Sit back and wait. No, thats not your style. Your
turf is your livelihood so you
anticipate problems and take
the initiative to solve them
before they appear. But the
environment has become less
predictable, and the pressure
to do more with less means
your resources are not what
they once were. Now you need a
different plan of attack to make
things happen. What are you
waiting for?
ProactiveSee how CIVITAS can help you stay ahead of the
game.
Ask your distributor about our Money-Back trial or visit
civitasturf.com
Always read and follow product label instructions. Use of the
product that varies in any way from the product label instructions
is a violation of federal and state law.
AS PER LABEL INSTRUCTIONS, ALWAYS USE CIVITAS AND CIVITAS
HARMONIZERTM TOGETHER.
Patent(s): www.suncor.com/patents
Trademark of Suncor Energy Inc. Used under license.
020-029_Oct14_Front9.indd 29 9/17/14 1:59 PM
-
30 GOLF COURSE MANAGEMENT 10.14
Turfgrass area:Putting green
Location:Oxford, Miss.
Grass variety:MiniVerde bermudagrass
(a)Raised turf
Turfgrass area:Putting green
Location:Rock Valley, Iowa
Grass variety:Penncross creeping bentgrass
(b)
PROBLEM
Presented in partnership with Jacobsen
Straight line void of turf
Answers on page 118
(photo quiz)
PROBLEM
By John MascaroPresident of Turf-Tec International
030-031_Oct14_PhotoQ.indd 30 9/17/14 2:00 PM
-
Superintendents ar eel tractor . The MH5 provides the
ultimate in versatility mow fairways or roughs; verticut; or
scalp-down before overseeding. To top it all
off, the affordable MH5 mower is the ideal Tier 4 Final
alternative for courses looking to get the most value from their
equipment
-mounted unit is the ultimate mowing tool at
www.jacobsen.com.
1.888.922.TURF | www.jacobsen.com2014 Jacobsen division of
Textron. All rights reserved.
*Excludes tractor.
YOULL GET ATTACHED.Mow. Verticut. Scalp-Down.
With a productive 135 width-of-cut and an MSRP of less than
$30,000,*
MH5
030-031_Oct14_PhotoQ.indd 31 9/17/14 2:00 PM
-
32 GOLF COURSE MANAGEMENT 10.14
Back to our rootsGrass Roots, an exhibit highlighting mod-
ern uses of turfgrass, is scheduled to open Oct. 16 at the U.S.
National Arboretum in Wash-ington, D.C. A collaboration of the
arboretum and the National Turfgrass Federation, the ex-hibit is
the centerpiece of the four-year Grass Roots Initiative focusing on
the environmental, economic and recreational benefts of turfgrass
in golf courses, athletic felds and landscapes.
Kevin Morris, executive director of the Na-tional Turfgrass
Federation, acknowledges the support of the National Arboretum in
pro-viding space for the turfgrass exhibit. Its a little unusual
for an arboretum to have a turf-grass display. We dont know of any,
anywhere. In fact, they were stepping outside of their comfort zone
frankly, but I applaud them for their vision the (former) director,
Dr. Co-lien Hefferan, and Scott Aker, the head hor-ticulturist.
The 1.3-acre Grass Roots exhibit space is located near the front
entrance of the Na-tional Arboretum, which hosts about 500,000
visitors annually. On opening day, the exhibit will contain 12
interactive displays, with two more to be constructed by next
spring. Each section provides information about the uses of
turfgrass, its importance to modern soci-ety, its history and best
management practices for maintenance. Among the displays are a
compact golf hole, sports felds, lawn areas with swards of six
warm-season and four cool-sea-son turfgrass species, more than 30
different ornamental grass species, and a rain garden showing the
ability of grass to absorb water
Geoffrey [email protected]
and nutrients. The golf area includes a 007 creeping bentgrass
tee, apron and 900-square-foot putting green; a Zeon zoysiagrass
fairway; tall fescue/Kentucky bluegrass rough; and a pond with
aquatic plants.
Interpretive signage will assist visitors, who will be able to
access additional information and intriguing Find the Facts
questions on the Grass Roots website in real-time via QR (Quick
Response) codes. Because many of the concepts displayed in the
exhibit need more ex-planation than there is space on the signage,
we are hoping that the QR code links will allow visitors easy
access to more information as they visit, says Morris.
The aim of the Grass Roots Initiative is to showcase the value
of properly managed turf as an environmental asset and the
importance of research to continue to leverage that value. As part
of the initiative, professional and scientifc symposia and
homeowner-focused workshops and demonstrations will be held. In
addition, the initiative is coordinating efforts to develop a
National Greenscape Corridor linking the National Arboretum, the
National Mall and Arlington National Cemetery, and coordinat-ing
public messaging and outreach to raise awareness about the
importance of sustainable
Presented in Partnership with Barenbrug
(turf)
The compact golf hole as seen from a small pond at the Grass
Roots exhibit in the U.S. National Arbore-tum. Photo by Geoffrey
Rinehart
turfgrass and landscape maintenance practices at these
culturally historic landscapes.
The Grass Roots Initiative is funded by pri-vate donations from
groups, including GCSAA, that represent the golf, sports turf,
turfgrass seed production, and lawn and landscape in-dustries. To
date, the National Turfgrass Fed-eration has raised $265,000, but
estimates that $400,000 will be needed over the four-year life of
the exhibit to cover construction costs and ongoing maintenance.
The exhibit gives golf and other turfgrass-related industries an
op-portunity to communicate to the general pub-lic and public
policy decision-makers the bene-fts of turfgrass in modern
society.
For more information on the Grass Roots Initiative and the
exhibit, see the fea-ture on GCSAA TV
(www.gcsaa.tv/view.php?id=2443) or visit the initiatives Facebook
page (www.facebook.com/NTFGrassRoots Initiative).
Geoffrey Rinehart is the coordinator for the Grass Roots
Initiative.
032-033_Oct14_Turf.indd 32 9/17/14 2:02 PM
-
Exclusively From
032-033_Oct14_Turf.indd 33 9/17/14 2:02 PM
-
34 GOLF COURSE MANAGEMENT 10.14
Avoiding damage when chain grinding
Purists say that grinding ruins a chain; that only a fle should
be used to restore sharp-ness. But most of us need to put a new
edge on chainsaw teeth and get back to work pronto and that means
grinding.
A few simple steps will maximize the ben-efts of your mid-priced
electric grinder (see Chain grinder: an essential tool on Page 34
of the August issue of GCM). A few good habits will reduce the
chance of damaging the chain during sharpening.
When you open the box, put your new grinders pieces on a terry
cloth towel or piece of carpet. Remove the big knob under the chain
vise, and lift it off the base. Split off the tilt table, being
careful not to lose the little steel balls and springs.
Youll likely see rough castings and blobby paint. Use emery
paper or a Dremel-type tool to remove casting fash and smooth the
surfaces that will make contact when ro-tating and tilting. It took
under 10 minutes to get all our pieces moving smoothly without the
balls and springs in place.
Lightly grease all contact surfaces and the detents. Use grease
to hold the balls and springs in place for reassembly. Unbolt the
chain-stop lever system at the back of the vise. This will let the
wheel drop down to touch the vise.
Assemble the motor head, and mount a wheel. Most chains need the
3 16- or 1 8-inch wheel. Set the wheel to 90 degrees and the vise
to 0 degrees. Use a protractor to ver-ify that the pre-set snap-in
vise angles actu-ally are 0, 15, 30 and 35 degrees, to the left and
right. If needed, re-mark the grinders scale to refect actual
angles. Cut a 3 5-inch index card at 30 degrees and verify that the
built-in
head angle indicator is accurate. You may need to grind the
detents a bit to achieve equality of the snap-in pre-sets.
The grinders weve checked are very close to dead-on, but its
worth verifying. A proper sharpening demands exactly equal angles
on the chains right and left teeth.
When reassembling the chain-stop system, bend some metal or add
washers if needed to snug up that system. A chain is smooth-est
when each sharpened tooth is exactly the same length.
We replaced our grinders sloppy adjusting screws and knobs with
the higher-quality screws and knobs that came with our
otherwise-al-most-useless universal plastic chain grinder. Look for
6-millimeter and 8-millimeter screws and wing nuts from the
hardware store. Met-ric nylon wing nuts can also be found hold-ing
the tail light assemblies in junkyard cars. These rustproof,
vibration-resistant fasteners are also great for holding down
small-engine air cleaners.
Sloppy screw threads can be enlarged and tightened with a few
drops of cyanoacrylate (Super Glue) allowed to harden in the
air.
Mount your grinder to a bench or wall, or onto sturdy -inch
stock. We store ours on a shelf. Clamp it to a tailgate, get 110
volts AC from the vehicle with an inverter, and youre ready to
restore a chain thats hit a rock. Bring along your fles for light
tooth dressing.
Now prepare the sharpener thats a human. It takes practice for
the ear to hear a smooth grind and the touch to kiss not clobber
the chain teeth. Its sharpeners, not grinders, that ruin
chains.
The trick is to keep each tooth as cool as possible, to avoid
de-tempering the steel. Take several small bites out of the tooth.
Pause for a second between bites. Let the heat escape from the thin
cutting edge.
Dont try to sharpen the chain with only one pass at each tooth.
Mark a starting tooth with a permanent marker, and set the
chain-stop lever so the stone just grazes each tooth. After one
round, screw in the chain-stop ad-juster a nudge, and do another
round until all are shiny, sharp and ready to have the depth guides
set.
Next month Ill look at some of the fner de-tails of cooler
sharpening and custom grinding for special purposes.
Scott R. Nesbitt is a freelance writer and former GCSAA
staff member. He lives in Cleveland, Ga.
(shop)
Scott R. Nesbitt
[email protected]
Top: While the chain at the top can be dressed up with a fle,
the teeth on the lower chain demand sharpening with a good grinder.
Photos by Scott NesbittMiddle: Rough surfaces need to be smoothed
and lubricat-ed to improve operation of the pre-set detents and
general operation of a mid-priced chain grinder.Bottom: Checking
the accuracy of the grinders angle settings is easily done with a
protractor and contributes to safer, smoother, faster cutting with
chain saws.
034-035_Oct14_Shop.indd 34 9/17/14 2:03 PM
-
Introducing the all new, redesigned Bobcat 3400.
How do you put more work behind you? It takes size,
strength,
speed to match the workload. The Bobcat 3400 is made with
the highest payload and towing capacities in its class.
Plus,
theres more horsepower, quicker acceleration and faster
travel.
Everything you need to get things done. Its the only utility
vehicle worthy of the hardest-working brand in the world.
Build the 3400 thats perfect for your job at
Bobcat.com/BuildAndQuote6
BIGGER.FASTER.
STRONGER.
Bobcat and the Bobcat logo are registered trademarks of Bobcat
Company in the United States and various other countries. 2014
Bobcat Company. All Rights Reserved. | 1268A
Bobcat.com/AllNew6 1.877.745.7813
034-035_Oct14_Shop.indd 35 9/17/14 2:03 PM
-
36 GOLF COURSE MANAGEMENT 10.14
On Tuesday, Nov. 4, Americans will go to the voting booth.
Governors will be elected in 36 states; all seats in the U.S. House
of Repre-sentatives and a third of the U.S. Senate will be voted
upon. With this much of Congress running for election or
re-election, turnout is going to be important. Election results
will de-cide the political landscape in which you op-erate your
golf course for the next two years.
According to the United States Election Project at George Mason
University, during the 2010 midterm election, only 41 percent of
the eligible voting population actually turned out to vote, meaning
only four out of 10 people helped elect the governors in 36 states.
Turn-out in the 2012 national election was 58 per-cent, but this is
not uncommon in years with a presidential race.
The 2010 redistricting process created Con-gressional districts
that are more gerrymandered and partisan than ever. When you couple
redis-tricting with low voter turnout in midterm elec-tions, many
members of Congress know they dont have to work hard to be
re-elected, which contributes to the current gridlock we are
expe-riencing in Washington, D.C.
Despite these challenges, it is important for GCSAA members
representing the golf course management profession to get out and
vote this November. Elected offcials make import-ant decisions
about how the golf course man-agement profession is going to be
treated, and its a key way to have a say in our democracy.
As an association with members in all 50 states, GCSAA offers
several recommenda-tions for participating in this important
polit-ical activity.
Register to vote. This is the most important action to take
before going to the polls. Every state has different regulations on
the deadlines for registering in order to vote in the Novem-
ber elections. Check with your local secretary of states offce
to fnd out what your deadline is and how you can get registered in
time to vote in November. In addition to getting yourself
regis-tered, check with others at your course and in your chapters
to make sure they are registered as well. The No. 1 reason why
people arent cor-rectly registered to vote is that they have moved,
and the correct address is essential.
Research the candidates. Knowing who you are voting for is as
important as registering to vote. GCSAA has several resources
available to help you learn about candidates. Check the re-sources
section of Government Relations On-line to learn about who is
running in your area and their positions on issues. In the future,
pri-mary elections will also be equally important for our
members.
Identify the initiatives. A characteristic of an informed voter
is that he or she knows about initiatives that are on the ballot.
Large states like California have a very simple process for
citizens to put referendums or initiatives on the ballot. In other
states, the process for add-ing items to the ballot is a little
more diffcult. However, what is important is that you are aware of
the initiatives that are on the ballot and how they will affect you
and your course.
Get out and vote. The preparation to vote takes a little bit of
time, but the process is rel-atively easy, thanks to the 2002 Help
America Vote Act. All states offer early voting, which allows
voters the opportunity to vote if they cant get to the polls on
Election Day. Some states also open their polls the weekend before
Election Day in order to make voting as easy as possible.
This month, the GCSAA Grassroots Am-bassadors will be
registering others to vote at chapter meetings and at their
facilities. In No-vember, they will be encouraging other GCSAA
members to become informed on issues and candidates and to go to
the polls and vote.
We want you to join GCSAA on social media and use the hashtag
#golfvotes. As we continue our grassroots efforts, we will use this
social media campaign to show members of Congress that not only
does golf have an eco-nomic impact in their districts, but its
workers vote as well.
Kaelyn Seymour is GCSAAs government relations specialist.
(advocacy)Kaelyn [email protected]
twitter: @GCSAA
Election results will
decide the political
landscape in which
you operate your
golf course for the
next two years.
Act now, vote later
Photo by Igor Stevanovic/Shutterstock.com
036-037_Oct14_Adocacy.indd 36 9/17/14 2:04 PM
-
036-037_Oct14_Adocacy.indd 37 9/17/14 2:04 PM
-
38 GOLF COURSE MANAGEMENT 10.14
Bunny [email protected]
twitter: @GCM_Magazine
Nestled in the west San Fernando Valley, among the rolling
foothills of the Santa Mon-ica Mountains, Woodland Hills Country
Club has been feeling the pain of a three-year drought along with
the rest of Southern Cal-ifornia. For the clubs superintendent,
main-taining the golf course around water restric-tions isnt
exactly breaking news.
Unfortunately, weather has always dic-tated our water use as
much as anything else, says Steve Sinclair, CGCS, whos been heading
up golf course operations at Woodland Hills for the past 22
years.
So Sinclair began pinching off the spigots fve years ago with
the frst phase in a planned reduction of maintained turf. At this
89-year-old layout, built at the height of the golden age of golf
course architecture and designed by renowned architect William
Billy Bell Sr., thats a tricky business.
We had to start small, says Sinclair, who is a 23-year member of
GCSAA. This is a tight old course, built in 1925 on 70 acres.
By the numbers, that means the mainte-nance teams accomplishment
of replacing 7 acres of turf with several types of naturalized
areas has reduced inputs to one-tenth of the golf course. On the
hillsides, beds of mulch planted with species such as lantana,
acacia and rock rose that are native to Southern Cali-fornia
resemble a desert landscape. An effcient drip-irrigation system
keeps these known low-water-users alive through the worst of the
drought, Sinclair says. Level areas have been seeded with
warm-season native grasses dotted here and there with desert
marigold for color and contrast. These areas, where the grasses can
grow as tall as 2 feet in the summer, require little to no
irrigation.
The aesthetics of the golf course have changed quite a bit.
Either they (members) loved it or they hated it, Sinclair recalls.
Now most have grown to accept it.
What might be easier to accept is the 10 per-cent savings in
water costs, which Sinclair says have doubled over the last seven
years. The club also took advantage of a $1-per-square-foot re-bate
from the Los Angeles Department of Water and Power to move
sprinkler heads, install the drip irrigation and plant native
species.
Sinclair points out that superintendents
(water)
The aesthetics
of the golf course
have changed quite
a bit. Either they
(members) loved
it or they hated it.
Now most have
grown to accept it.
Steve Sinclair, CGCS
pondering similar projects should know that natural is not the
same as easy.
I think its more work to maintain a na-tive area than to
maintain turf, he says. Dont look at it as labor-saving, especially
in the frst couple of years.
Seeding of the newest naturalized areas was completed as
recently as last month, and Sinclair says he will be taking up the
matter of designating additional areas for naturalization at the
clubs next board meeting. The timing couldnt be more critical,
given the ongoing drought and the recent news that the club will
have to wait until 2019 to receive reclaimed water not next year,
as the city had previ-ously promised.
Rainfall would solve a lot of problems here, Sinclair says.
Bunny Smith is GCM s senior managing editor.
The natural
Water savings at Southern Californias Woodland Hills CC have
been achieved by installing native ornamentals in mulch beds on
hillsides (top) and planting warm-season native grasses in fat
spots (bottom). Photos courtesy of Steve Sinclair
038-039_Oct14_Water.indd 38 9/17/14 2:06 PM
-
038-039_Oct14_Water.indd 39 9/17/14 2:06 PM
-
40 GOLF COURSE MANAGEMENT 10.14
Since I began writing this column for GCM, I have felded a
number of technology-related questions from fellow superintendents.
One of the most common questions from superintendents looking to
dive into some of the technologies discussed here and modernize
their maintenance operations is a simple, Where do I start?
While I have written about Twitter, the use of drones and new
irrigation technologies, among other things, these tools and apps
tend to intimidate some who dont have a base of knowledge to start
with. First, let me reassure you that while you can break a
computer, tablet or phone by experimenting with it, those problems
are typically software related, and in most cases, those can be
easily resolved. Regardless of what you do, the device is not
likely to catch fre or break into a million pieces.
That being said, I have a few words of advice that I hope will
take the intimidation factor out of trying new technologies and
will protect both you and your information. First, always have a
backup of the information on your devices. And dont simply back up
your computer once or twice a year; use an active backup that
automatically backs up on a regular schedule.
At our facility, our offce computers and other devices back up
to a hard drive built into our router. If any of our computers
completely crashes, these backups give us the ability to have a new
one set up and running, with every fle and setting exactly the same
as it was before, in two hours. Everything backs up on an hourly
basis so, at worst, we would lose one hour of work. Both Apple and
Windows offer similar options for backup, and some services are
available online that do the same,
(technology)Bob Vaughey, [email protected]
Twitter: @rollinghillsgcm
such as Mozy (http://mozy.com/#slide-5) and Carbonite
(www.carbonite.com). Editors note: To see videos further
demon-strating these backup options and more, visit the
GCM blog at http://gcm.typepad.comSecond, use antivirus software
and other
protection tools, especially if you are using Windows-based
computers. While Apple products are not immune to attacks, they are
far less vulnerable than Windows products. One key reason for that
is that the number of Windows users far outpaces Mac users, so they
are simply targeted more frequently. Do not open unknown emails,
attachments or links to unknown websites. There are many ways
hackers can access your computer and most will go unnoticed beyond
some general slowing of your computer. Antivirus software can be a
bit annoying at times, but its well worth the investment if only
for creating some peace of mind.
Now that your computer is protected and backed up, the real fun
can begin. While the more adventurous might be inclined to explore
the inner workings of the hardware youre using, Id suggest staying
away from that and focusing your time on specifc apps, programs and
online resources. Explore cloud-based or online programs and apps.
Check out online options for offce documents, scheduling tools and
other regular tasks. Sign up for Twitter, Facebook and LinkedIn.
Use these new avenues to connect with other superintendents.
As you get more comfortable with both the hardware and software
youre using, you can move on to more advanced concepts. Everyone
starts somewhere, and only through trial and error do they become
profcient with computers.
Remember, you have everything backed up, you have virus
protection and, hopefully, most of your work is actually being
performed on the cloud and not on your physical machine, so you can
feel comfortable exploring all these technologies have to offer
without fear.
Bob Vaughey, CGCS, is the director of agronomy at Rolling
Hills Country Club in Palos Verdes, Calif., and a 10-year
GCSAA member.
Taking the technology plunge
Helpful linksBasic advice:
http://home.mcafee.com/
advicecenter/?id=ad_ost_tohtpyo&ctst=1
Computer backups:
http://www.pcworld.com/article/2065126/
the-absurdly-simple-guide-to-backing-up-
your-pc.html
Online shopping tips:
http://www.staysafeonline.org/stay-safe-
online/protect-your-personal-information/
online-shopping
Safe Social networking:
http://www.networkworld.com/
article/2346606/microsoft-subnet/12-tips-
for-safe-social-networking.html
Photo illustration by Igor Stevanovic/Shutterstock.com
040-043_Oct14_Tech.indd 40 9/17/14 2:07 PM
-
Damaged turf on your #7 tee? Weak areas on your #2 and #12
greens? Want to improve the overall stand of grass
on your high traffic areas on #6 and #10? Greening up your
course has never been easier or quicker with the
TriWave 40. Just hook up to your turf vehicle and seed them all
in one trip.
Quickly adjust seed rates and depths to match conditionsno tools
required
Patented floating heads and seed delivery system maximize
germination rates
Patented WaveBlade technology optimizes seed-to-soil contact
with minimal turf disruption
Seed while you turn so you can follow greens, collars and
contours
Its your grass on the line. Save it with the TriWave 40.
CALL 1-800-679-8201 for a FREE on-site demonstration, or
VISIT WWW.TURFCO.COMto see the TriWave 40 in action.
[...on your tee boxes]
[...on your greens]
[...on your fairways]
[...on your high traffic areas]
GO GREEN.
INTRODUCING THE TURFCO TRIWAVE 40
040-043_Oct14_Tech.indd 41 9/17/14 2:07 PM
-
PUREFORMANCEF A I R WAY B L E N D
P F
040-043_Oct14_Tech.indd 42 9/17/14 2:07 PM
-
www.tee-2-green.com |
[email protected] |
[email protected]
BENTGRASS. IT'S ALL WE DO.
Play it Safe with
When its time to select the best bentgrass for your fairways,
trust the company known for quality. Tee-2-Green has
been the industry-leading supplier of quality bentgrass for over
50 years. Our proven varieties offer exceptional
disease resistance, require less water and provide the density
that helps crowd out Poa allowing you to provide
the exceptional playing conditions that will make you proud.
040-043_Oct14_Tech.indd 43 9/17/14 2:07 PM
-
A small-engine expert offers tips for year-round maintenance
Dale Gabrielse
READYREADYto roll
READYREADYREADYpush
READYREADYREADYREADYREADYpullrr
044-053_Oct14_sm_engine.indd 44 9/17/14 2:08 PM
-
Photo illustration courtesy of Subaru Industrial Power
Products
044-053_Oct14_sm_engine.indd 45 9/17/14 2:08 PM
-
46 GOLF COURSE MANAGEMENT 10.14
Power equipment like snow blowers, power washers, generators and
lawnmowers are built to do a
specifc job and, in most cases, they do it well. But when a
piece of equipment doesnt perform as it
should or not at all it not only impacts how safely, effciently
and quickly you can do your job, but
it can also impact your bottom line.
Thats why proper engine maintenance and on- and off-season
preparation are crucial. Without this
attention, the engines performance could be diminished and its
lifespan drastically reduced, which
means youll be spending more time and money on repairs or
replacements. And when your equipment
is out of commission, it also means projects on the golf course
start running behind schedule.
But make regular engine maintenance a habit and the reverse is
true; machines run at peak perfor-
mance, engines last longer, and the potential for injuries and
costly damage to components is reduced.
loose or damaged due to vibrations or fuctuations in
temperature. Operating equipment with loose or bro-ken fasteners
could result in serious damage to the engine and operator.
Clean air is crucial to the engines effciency. To make sure its
getting enough, check the air flter and replace it if its dirty.
Also replace a foam flter that has torn or shrunk so contaminants
dont get into the engine.
Even more vital to engine effciency is fuel. If it hasnt been
treated with a stabilizer, it degrades and becomes stale. Stale
fuel causes residue buildup that can plug the carburetor and
prevent the engine from
Get fired upBefore you fre up the engine at the start of a
sea-
son, make sure its ready.Inspect the engine on a stable, fat
surface in
a well-ventilated area away from ignition sources. Check all
components to make sure they are clean, in good condition and frmly
in place, including the spark plugs, muffer and fuel cap. Also be
sure wires and fuel hoses are intact and in good condi-tion.
Damaged fuel hoses can allow fuel to escape, which increases the
risk of fre when they are near a hot engine.
Tighten or replace bolts that might have become
Replace a dirty, shrunken or torn air flter to ensure the engine
gets enough air to run effciently. Photos courtesy of Subaru
Industrial Power
044-053_Oct14_sm_engine.indd 46 9/17/14 2:08 PM
-
Protect your work of art.
Your course is a masterpiece, and Turfcide ensures it will be
admired.
Thats why professionals trust us and build their snow mold
control
program on a Turfcide foundation. Nothing works to protect
your
masterwork like we do.
Contact your AMVAC/AEP
distributor today or call us
directly at 888-462-6822.
Or visit amvac-chemical.com
for more information.
044-053_Oct14_sm_engine.indd 47 9/17/14 2:08 PM
-
48 GOLF COURSE MANAGEMENT 10.14
starting. To avoid this entirely, always replace old fuel.Oil
that hasnt been changed regularly can be-
come thick and gummy and increase the risk of cor-rosion that
can keep the engine from running eff-ciently. Replace it with oil
that has the proper weight as specifed in the owners manual.
If the engine has accumulated dirt and dust while in storage, a
thorough cleaning will get rid of buildup and keep it running
effciently. Make sure the engine and the recoil starter, if the
engine is equipped with one is free from dirt, grass or other
debris. Also make sure the cooling fns under the shroud are clean
and free of obstructions that could cause the head area to
overheat. You can use an air hose to blow off the engine or wipe it
down with a dry rag. Avoid washing it with a hose or pressure
washer, which could force water into the engine and cause
corrosion.
Now youre ready to roll, push or pull into the season.
What to do whenIts not uncommon to occasionally experience
problems with starting or lost power. When this happens, always
begin by inspecting the four things an engine needs to operate:
fuel, oil, spark and compression.
Always make sure there is enough fuel in the tank and the fuel
valve, if the engine is equipped with one,
is open and in the on position. Also ensure the en-gine has
enough oil and the ignition is turned on. While these are obvious
concerns, checking them frst can save you a lot of time and
hassle.
In addition, make sure enough fuel is making its way to the
engine. Choke and pull the starter fve or six times, then remove
the spark plug and see if the electrode is wet. A dry electrode
indicates that not enough fuel is being supplied to the engine,
which can be a result of several issues and should be in-spected by
a repair shop.
An improperly gapped or loose spark plug also could be the
culprit of an engine that doesnt start. Inspect it to make sure the
porcelain and electrodes are not damaged and that its properly
gapped so it can fre effciently. Refer to the manufacturers man-ual
for the recommended gap distance. Tighten the spark plug frmly, but
dont make it too snug as this can damage the threads in the
cylinder head.
You also should check to ensure the spark plug is producing a
spark. To test it, take the cap off and re-move the spark plug from
the engine. Insert it back into the cap and place the metal base
against the en-gine, which will ground the current as you test.
En-sure the ignition is in the on position and slowly turn the
engine over. If the plug does not produce a spark, then it should
be replaced.
Also test the engines compression by slowly turn-
Change oil regularly to prevent it from becoming thick and
gummy.
044-053_Oct14_sm_engine.indd 48 9/17/14 2:08 PM
-
FMC is offering turf and ornamental professionals significant
savings,
portfolio bonuses and extended terms on many of our most popular
products.
The more you buy, the more you earn!
2014 EARLY ORDER PROGRAM
B.Y.O.B. Build Your Own Bonus Incentive
www.fmceop.com
Base Rebate Earned
$ 200 to $ 999
$ 1,000 to $ 1,499
$ 1,500 to $ 2,499
$ 2,500 +
2 Product Lines
5%
10%
15%
20%
3 Product Lines
10%
15%
20%
25%
Minimum Purchase forProduct Line to Qualify for B.Y.O.B.
Incentive:
n Herbicides: $ 500
n Insecticides: $ 500
n Fungicides: $ 1,000
Redemption: To be eligible to receive your rebate, complete the
following easy steps:
1. Visit our website at www.fmceop.com
2. Complete the form online by entering the required
information. The form will automatically calculate your estimated
Base Rebate and your B.Y.O.B. Incentive.
3. The rebate form must be submitted online at www.fmceop.com no
later than January 16, 2015. Please keep a copy of your e-mail
confirmation for your records.
AMAZING EARLY INCENTIVES:Why wait? Purchase qualifying
products
from September 15 to October 31, 2014 and
earn an additional rebate of 50% more than
the November to December Base Rebate.
B.Y.O.B. (BUILD YOUR OWN BONUS):Purchase combinations of
qualifying products from any
two or all three FMC product lines (fungicides, herbicides,
or insecticides) and multiply your entire base rebate by the
corresponding percentage in the chart below.
Dates:The FMC Early Order Program runs from September 15, 2014
to December 12, 2014.
Rebate Savings: Earn up to 13%. Refer to the participating FMC
products on page 2 for rebate savings per unit.
Extended Terms: The Early Order Program enables you to purchase
products at current pricing and receive extended terms. Payment for
agency products will be due on June 10, 2015. Prices and terms for
qualifying FMC Distributor Products (non-agency) are determined by
the FMC Authorized Distributor.
Achieve the top rebate level ($ 2,500+) and you will qualify to
earn the November to December Base Rebate per unit listed on page 2
on all future purchases through June 30, 2015.
2014 FMC Early Order Program Information (Go to website for a
complete list of terms and conditions) To qualify, the
participating end-user must earn a rebate minimum of $200.00 on FMC
qualifying products.
Product must be purchased through authorized FMC agent(s) or
distributor(s) between September 15 and December 12, 2014.
This program applies only to qualified end-user professionals in
golf, lawn care, sports turf, greenhouse, nursery and sod
farms.
Echelon herbicide on-fertilizer commitments must be made from
September 15, 2014 to December 12, 2014. Actual purchases of
committed volume may be made from September 15, 2014 through May
31, 2015. Invoices will be required to verify Echelon on-fertilizer
purchases.
Rebates will be based upon reported sales from the FMC
authorized agent(s) or distributor(s). Copies of invoices may be
requested to verify actual product purchases if FMC cannot verify
the purchase through electronic data received directly from the FMC
Authorized Distributor or Agent.
Invoiced prices and terms for qualifying FMC Distributor
Products are determined by the FMC Authorized Distributor. Prices
and terms for qualifying FMC Agency Products are determined by FMC.
Agency products are noted with a listed price per unit on page 2 of
this form.
Rebates will be calculated based on the "Base Rebate Per Unit"
earnings structure listed on page 2 based on when the product was
purchased during the respective time periods. The B.Y.O.B.
Incentive will be based on a percent of the corresponding base
rebate earned through purchases. FMC program administration will be
responsible for completing final calculations. All decisions are
final. Program cannot be combined with any other FMC marketing
programs being offered.
All rebatesunless otherwise specified in writing by the
end-userwill be issued to the qualifying agent(s) or distributor(s)
who processed the order. The rebate will appear as a credit on the
end-users account. Rebate will be issued to the participating
agent(s) or distributor(s) on or before July 31, 2015. A letter
will be sent to the end-user detailing the credit and identifying
the authorized agent(s) or distributor(s). If end-user prefers a
check, please note that request on your respective rebate form.
FMC Corporation reserves the right to cancel or modify this
program at any time.
Taxes on earnings are the responsibility of the program
participant.
Digital Inserts_Oct14.indd 4 9/23/14 10:23 AM
-
FMC
FU
NG
ICID
ES
16 oz
64 oz
25 lbs
2.5 gallons
64 oz
4 Units
2 Units
5 Bags
2 Units
4 UnitsDisarm M
Disarm G
Disarm 480SC
Disarm C
$28.00
$100.00
$3.00
$36.00
$18.00
$18.50
$67.00
$2.00
$24.00
$12.00
CALCULATE YOUR REBATE2014 EARLY ORDER PROGRAM
Golf Use Lawn Use Greenhouse/Nursery Use
FMC reserves the right to change any or all features associated
with this announcement at any time. This form is not a contract.
Only sales from FMC Authorized Distributors or Sales Agents may
participate in this program. Always read and follow label
directions. FMC, Blindside, Dismiss, Echelon, Onyx, QuickSilver,
Solitare, SquareOne, Triple Crown and Talstar are trademarks of FMC
Corporation. Aria is a trademark of Ishihara Sangyo Kaisha, LTD.
Verge is a trademark of Oil-Dri Corporation of America. DISARM,
the DISARM logo, XONERATE and the XONERATE logo are registered
trademarks of Arysta LifeScience North America, LLC. Onyx Pro,
Triple Crown Golf, Talstar Select and Talstar XTRA GC are
restricted use pesticides. 201