GOLDEN MUSTANG Product Data GMP Air Compressor Oil 32 Description Compressor Oil has been formulated from highly refined paraffinic base oils and high performance additives to provide outstanding lubrication in a variety of rotary and reciprocating air compressors. All ISO viscosity grades are formulated with outstanding oxidation performance, wear protection, resistance to rust and corrosion, rapid water separation and foam control. Applications Compressor Oil 68 is suitable for use in rotary vane and screw compressors. Compressor 68, 122 and 220 are effective as "once-through" lubrication of reciprocating compressor cylinders as well as crankcases and some types of rotary compressors. Recommended for Vacuum pumps and as R&O lubricants in other industrial oil applications Compressor Oil is not recommended for breathing air or oxygen compression In severe service applications, where equipment is subject to higher operating temperatures, subject to excessive deposits varnish and shortened service life Follow the compressor manufacturers recommendations for lubricant selection For gases other than air or natural gas and for specific compressor lubricant recommendations, please your Imperial Oil representative. Advantages Reduced deposits and coking, extended service life with the potential for reduced maintenance Can help reduce compressor component wear and thereby reduce maintenance requirements Internal components are protected from surface degradation, thereby extending component life Rapid release of foam and air, protecting components from aeration and cavitation damage, leading to reduced wear Less carryover to downstream equipment.
36
Embed
GOLDEN MUSTANGGOLDEN MUSTANG Product Data GMP E-Reduct 680C Description Reduct oils are a range of premium quality, heavy duty industrial gear oils which have been developed for the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GOLDEN MUSTANG
Product Data
GMP Air Compressor Oil 32
Description
Compressor Oil has been formulated from highly refined paraffinic base oils and high
performance additives to provide outstanding lubrication in a variety of rotary and
reciprocating air compressors. All ISO viscosity grades are formulated with outstanding
oxidation performance, wear protection, resistance to rust and corrosion, rapid water
separation and foam control.
Applications
Compressor Oil 68 is suitable for use in rotary vane and screw compressors.
Compressor 68, 122 and 220 are effective as "once-through" lubrication of
reciprocating compressor cylinders as well as crankcases and some types of rotary
compressors.
Recommended for Vacuum pumps and as R&O lubricants in other industrial oil
applications
Compressor Oil is not recommended for breathing air or oxygen compression
In severe service applications, where equipment is subject to higher operating
temperatures, subject to excessive deposits varnish and shortened service life
Follow the compressor manufacturers recommendations for lubricant selection
For gases other than air or natural gas and for specific compressor lubricant
recommendations, please your Imperial Oil representative.
Advantages
Reduced deposits and coking, extended service life with the potential for reduced
maintenance
Can help reduce compressor component wear and thereby reduce maintenance
requirements
Internal components are protected from surface degradation, thereby extending
component life
Rapid release of foam and air, protecting components from aeration and cavitation
damage, leading to reduced wear
Less carryover to downstream equipment.
2
Reduced sludge formation in crankcases, discharge lines, coalescers, and coolers
TECHNICAL PRODUCT INFORMATION
TYPICAL CHARACTERISTICS
Compressor Oil 68 122 220
Kinematic Viscosity 40°C 100°C
68 9.1
122
12.3
220 18.4
Pour Point °C -21 -15 -12
Flash Point °C 240 230 245
Density @15°C 0.868 0.882 0.889
Colour, ASTM 1.0 2.0 2.5
GOLDEN MUSTANG
Product Data
GMP Engine Oil R-40
Description
Provides among the highest levels of performance and protection ever offered in passenger
car motor oils. They are licensed as API SN Resource Conserving and ILSAC GF-5 and meet the
latest (2011) fuel economy standards while dramatically exceeding specifications for wear
control, pistons deposits, cleanliness, varnish and sludge, oxidation control, and emission
system and seal compatibility. In repeated testing, over the range of tests and variants.
Applications
PCMOs are specifically designed for use wherever ILSAC GF-5 and/or API-SN Resource
Conserving or previous motor oil specifications are called for.
Advantages
Full synthetic motor oils featuring advanced viscosity control and shear stability; they
maintain performance in the harshest conditions and for extended oil drain intervals, and
provide:
The lowest Levels of weighted piston deposits – far exceeding industry specs
The highest level of high temperature deposit control
Wear protection so effective it is measured in atoms per hour
The most advanced protection against varnish, corrosion, sludge, and foaming to
prolong the life of your engine.
GOLDEN MUSTANG
Product Data
GMP E-Reduct 680C
Description
Reduct oils are a range of premium quality, heavy duty industrial gear oils which have been
developed for the lubrication of enclosed gears, working under both normal and severe
operating conditions. They are formulated from high quality paraffinic base oils and
incorporate mild extreme pressure sulphur-phosphorus chemical technology.
Applications
Enclosed industrial gear units operating under high loads and or severe shock
loading conditions
Enclosed spur, helical, bevel and worm gears
Heavily loaded plain or anti-friction bearings operating under shock loading
conditions.
Oil bath with splash, circulation or spray lubrication
Chain drives, slide guides and flexible couplings
Many manufacturing industries such as mining, cement, steel and general
Synthetic Blend 15W-40 CJ-4/SN is the latest generation premium heavy-duty engine oil that
meets or exceeds the service requirements of virtually all diesel engine manufacturers; both
2007 emission compliant and older engines, as well as new engines using SCR and EGR systems
for 2010 emission compliance. It is suitable for virtually all on-highway and off-highway
service applications.
Applications
Engines calling for API CJ-4, CI-4 Plus, CI-4, SN, SM,
Meets needs of all the 4-stroke engines in a fleet that call for a 15W40 viscosity
Satisfies requirements for naturally aspirated and turbocharged engines
All 2007 emissions compliant engines and 2010 SCR and EGR emission compliant
engines
Excellent for use in engines with shorter piston crowns, higher power density,
inter-cooling, electronic fuel management, exhaust gas recirculation, and
exhaust particulate traps
Meets needs of the older engines in on-highway service
Satisfies off-highway engines calling for multi-grade engine oils
Works well with both on- and off-highway diesel fuels
Advantages
Meets or exceeds requirements of today’s high performance, low emission diesel engines while providing excellent performance in older engines allowing operators use
of one oil for many engines.
Provides significantly improved wear protection, deposit and viscosity control and
oxidation resistance.
Provides excellent protection and durability demonstrated in control of valve train
wear and piston ring and liner wear, helping to prolong engine life.
Provides improved soot control and an exclusive detergent system for outstanding
engine cleanliness.
2
Demonstrates exceptional low temperature flow properties which helps to speed cold
starts.
Demonstrates reduced fuel consumption.
Demonstrates performance reserve throughout the oil drain interval for full protection
and lubrication throughout the entire oil drain interval.
Demonstrates outstanding shear stability for viscosity control.
Simplifies inventories- one oil for all your 4-stroke engines; gasoline and diesel
TECHNICAL PRODUCT INFORMATION
TYPICAL CHARACTERISTICS
Property Test Method ASTM -D SAE Viscosity Grade 15W-40 Specific Gravity D4052 0.868
Flash Point °C 92 235
Pour Point °C 97 -35
Low Temp Viscosity cP @-20
5293 6200
Viscosity cSt @ 40°C cSt @ 100°C
445 115
15.0
VI 2270 135
Sulfated Ash wt % 874 1.0 max
TBN 2896 9.5
GOLDEN MUSTANG
Product Data
GMP Premix Coolant Yellow
Description
premium quality antifreeze / coolant that is compatible with all automotive and light duty
truck antifreeze / coolant products In automobiles. It is ideal for initial fills, coolant change-
outs or top-offs.
Applications
recommended for all automotive and light duty truck cooling systems not requiring the use of
SCA’s, regardless of color.
Advantages
contains no phosphates, nitrates, borates, or silicates.
protects all six standard metal alloys (iron, copper, brass, solder, aluminum,
and steel) found in radiator systems
will not cause turbidity, precipitation, or inhibitor effectiveness reduction
Mixes with carboxylate-based coolants such as Dex-Cool
Also mixes with conventional coolants such as Prestone, Zerex, and Peak.
For all makes and models of passenger cars and light duty trucks
5 years / 150,000 mile service life when used during complete drain and fill
Excellent protection during high operating temperatures
Protects against water pump cavitation
Protects against corrosion
Does not change color when added to existing fluid
Contains a bitterant
TECHNICAL PRODUCT INFORMATION
TYPICAL CHARACTERISTICS
2
Property Test Method ASTM -D Concentrate 50/50 Pre-diluted Appearance Visual Yellow Yellow Ash Content (% w/w) 1119 1.0 max 1.0 max Freeze point as sold 1177 -84°F -34°F pH as sold 1287 10 - 11 10 - 11 Reserve Alkalinity (ml 0.1N HCL)
1121 4.0 min 4.0 min
Shelf Life (unused) NA 2 years 2 years Silicon as silicate (ppm - Max)
ICP 135 135
Specific Gravity (15.6°C) 1122 1.050 - 1.056 1.060 - 1.080
GOLDEN MUSTANG
Product Data
GMP SAE - 40
Description
Heavy Duty Engine Oils are heavy-duty engine oils formulated to meet the needs of older
engines operating in severe service in on and off highway applications.
Applications
Engines calling for API CF-2, CF, CE, CD-II, CD, and SJ
Meets needs of older engines that call for a mono-grade engine oil
Satisfies requirements for naturally aspirated and turbo-charged engines
Meets needs of the older engines in on-highway service
Satisfies off highway engines in mining construction and farming service
Works well with both on and off highway diesel fuels
May be used as Cat TO-2 transmission fluid 10W, 30
Works well as Allison C3 C4 Fluid 10W, 30
May be used in Spicer/Dana and Eaton/Fuller transmissions
Advantages
Heavy Duty Engine Oil:
Provides wear protection, deposit control and oxidation resistance.
Provides protection and control of valve train wear and piston ring and liner wear,
helping to prolong engine life.
Maintains engine cleanliness with good soot control and exclusive detergent system.
TECHNICAL PRODUCT INFORMATION
2
TYPICAL CHARACTERISTICS
Property Test Method ASTM -D
ISO VISCOSITY Grade
10W 20 30 40 50
API Service Category
SJ SJ SJ SJ
Gravity °API
1298 30.5 30 29 28.5 28.3
Flash Point, °C/°F
92 207/405 200/392 221/430 220/428 222/432
Pour Point, °C/°F
97 -32/-25 -12/10 -34/-30 -33/-27 -33/-27
Low Temp Viscosity cP @-20
5293 6000
Viscosity cSt @ 40°C cSt @ 100°C
445 41.2
6.2
32 95.5
10.5
154
14.8
207 18.0
VI 2270 95 95 95 95 95
TBN 2896 7.0 7.5 7.5 7.5 7.5
GOLDEN MUSTANG
Product Data
GMP SAE - 40
Description
Non-Detergent Motor Oil are blended from well refined petroleum base oils and may be used
in older, worn engines with high oil consumption
Applications
Engines calling for API SA or SB performance level engine oils
API GL-1 Gear Applications
Older engines
Engines with high oil consumption
Non critical low pressure hydraulic systems
Drip Oilers, spindle lubrication, once thru applications
Light duty compressors
Advantages
Well refined mineral oils with no added additives
Available in 5 viscosity grades
Mono grade formulations
TECHNICAL PRODUCT INFORMATION
TYPICAL CHARACTERISTICS
Property Test Method ASTM -D
ISO VISCOSITY Grade
10 20 30 40 50
ISO VG Grade
32 68 100 150 220
API Gravity
1298 22.2 22.8 23.4 23.8 24.4
2
Pour Point °C/ °F
97 -23/-10 -21/-5 -21/-5 -15/5 -7/20
Viscosity , SSU @ 100°F
88 150 250 450 600 900
VI 2270 50 50 50 50 50
GOLDEN MUSTANG
Product Data
GMP SHC 100
Description
Super premium quality greases which combine the unique features of a synthetic base fluid
with a lithium complex soap thickener. The wax-free nature of the synthetic base fluid,
together with its low coefficient of traction compared with mineral oils, provide excellent
low-temperature pumpability, very low starting and running torque and can reduce operating
temperatures in the load zone of rolling element bearings.
Applications
anti-wear grease particularly suited for higher speed bearing applications, such as electric
motors, where reduced friction, low wear and long service life are required.
The recommended operating temperature range of -50°C to 180°C.
Advantages
Wide range of applications.
Outstanding high and low temperature performance.
Excellent resistance to rust, corrosion and oxidation.
Increased protection against water penetration.
Reduced wear under heavy loads.
Reduced energy consumption (low coefficient of traction).
premium, ethylene glycol antifreeze / coolant for use year round in both aluminum and
conventional metal engine cooling systems of automobiles, trucks, marine and stationary
equipment and heavy duty diesel engines (with the use of SCAs). Formulated with a low
silicate type rust and corrosion inhibitor system which effectively alleviates problems of gel
formation and prevents loss of radiator heat transfer capacity.
Applications
formulated to meet the stringent aluminum corrosion protection requirements of today’s automotive engines. Due to its low concentration of silicate, it also complies with Cummins
and other heavy duty diesel engine manufacturer’s requirements. This product is also
designed for use in industrial internal combustion engines which require an antifreeze /
coolant to provide protection against freezing, boil over, and corrosion.
suitable for use where the following specifications are required:
AAMV
Freightliner
General Motors GM1825M
General Motors GM1899M
ASTM D 3306 incl. D 4340 (Performance corresponding to GM6038M)
ASTM D 4985
Caterpillar EC-1
ASTM D 6210
J.I. Case JIC501
Chrysler MS-7170
John Deere H24B1
Cummins 90T8-4
John Deere H24C1
Federal Specification A-A-870
PACCAR
Ford ESE-M97B44-A
SAE J1034
2
Mack Truck
TMC RP329
Detroit Diesel 7SE298
TMC of ATA RP-302A
Advantages
Universal formula for both automotive and heavy duty diesel engines (ASTM D 3306 and
ASTM D 4985)
Excellent heat transfer properties
Premium anti-foam characteristics
Premium corrosion protection for aluminum, brass, copper, solder, steel and cast iron
Low silicate formulation
Amine-free and borax-free
Concentrate mixes readily with clean tap water
Pre-diluted product is ready to use and requires no mixing top-up and initial fill
Compatible with cooling system filters
Compatible with heavy duty diesel supplemental coolant additives
Compatible with conventional brands of coolant
100% biodegradable in its pure, unused form
Contains bitterant for animal and child protection