16 WATER QUALITY PRODUCTS T his article will review the bene- fits and challenges of imple- menting water reuse strategies, focused on building heating, ventila- tion and air conditioning (HVAC) and plumbing systems at the new 217,000-sq-ft Milton Union K-12 School. Public policy changes (codes, etc.) needed to be addressed during a project to more readily integrate these strategies into the building design. A summary of the water savings associ- ated with incorporating these strategies is described herein. Taking advantage of the availability of “wasted” and “site water” is based on considering critical design elements coupled with techno- logical advances that have occurred in the water treatment industry. Rainwater & Regulations Only 3% of the world’s water resources are freshwater, yet millions of gallons of potable water are flushed every day. In fact, toilet flushing makes up approximately one-fourth of the water consumed in the average home. And, according to American Water Works Assn. studies, flushing in commercial buildings accounts for almost 50% of indoor water consump- tion. Additionally, almost 4% of the energy consumed in the U.S. is for water pumping and distribution—just so people can have water available at the faucet or to flush a toilet. That is a considerable amount of energy use and water consumption just to flush a toilet, let alone the cost expended to treat, store and distribute that water. There are multiple alternative sources of water that could be reused for flushing. These include subsurface water, rainwater, greywater and black- water. Each of these presents different challenges, including treatment, storage and pumping. With each of these chal- lenges, the cost for reuse increases significantly from using subsurface water or rainwater to using greywater or blackwater. The cost for potable versus non-potable water reuse also increases due to the treatment required. Typically, the most economical and sustainable water solutions involve using collected and treated subsur- face and rainwater for flushing (water closets and urinals), cooling coil condensate for cooling tower makeup water and either source for irrigation. To start any project, one needs to research which codes or local regula- tions need to be addressed. Current plumbing codes do not typically permit using untreated outside-sourced water in a building. Additionally, water rights are a major concern in many areas of the country where collecting and using the water landing on or passing through (via streams, creeks, etc.) a property may not be allowed by local law. Public water systems typically charge for sewer use based on metered potable water use. Water reuse presents a chal- lenge to these local utilities because there is no rainwater metering, thus they do not know how much waste- water is coming from a home or office using rainwater for toilet flushing. This brings up the issue of whether outside- sourced water needs to be metered. The American Rainwater Catchment Systems Assn. (ARCSA) and the American Society of Plumbing Engineers (ASPE) are currently co-developing a new American National Standard to provide design and installation requirements for rain- water catchment systems. ARCSA/ ASPE 63: Rainwater Catchment Systems, an existing standard first published in July 2009, has gone through extensive revision using the ASPE standards development process accredited by the American National Standards Institute. This standard has received support from the International Assn. of Plumbing and Mechanical Officials and NSF Intl. Once these standards are in place, they can provide consis- tency in regulating, reviewing and approving the alternative means to make use of rainwater for building plumbing systems. Implementing Reuse Heapy Eng. designed the mechanical- electrical systems and provided LEED consulting services for Milton Union School Districts in West Milton, Ohio, for its new LEED Gold K-12 school. The new building consolidates the district’s elementary, middle and high schools into one building. The project includes classrooms, a cafeteria, a gymnasium, a library, a media center and an auditorium. Some of the green strategies used in this building initiative include LED lighting, large window areas to utilize natural lighting with a system that auto- matically dims inside lighting when it is bright outside, solar thermal and photo- voltaic panels, and a 75,000-gal reservoir that collects rainwater for use in rest- rooms and watering the athletic fields. High-efficiency chillers make ice inside storage tanks during the night Water Reuse Goes to School K-12 school uses rainwater for toilet flushing & irrigation By Michael J. Berning special section rainwater harvesting Milton Union K-12’s 75,000-gal rainwater reservoir collects rainwater for reuse in toilet flushing and irrigation.