Goal: To understand the HR diagram Objectives: 1)Recap of magnitude scale 2)To understand the Relationship between Temperature, color, and color magnitude.

Goal: To understand the HR diagram

Objectives:1) Recap of magnitude scale

2) To understand the Relationship between Temperature, color, and color magnitude

differences3) To learn how to recognize the Main sequence

on an HR diagram4) Red giants, Super giants, White Dwarfs, oh my!5) To understand how to use the HR diagram for

Clusters of stars

Magnitude scale

• To recap, the magnitude scale allows us to compare stars of vastly (a factor of a trillion) different brightnesses on a single scale.

• Bigger numbers mean dimmer, smaller brighter.

• Each “color” has its own scale – and all are calibrated to Vega.

Magnitudes of a different color

• What happens if you compare magnitudes of different colors?

• You get the temperature of the object!• You also get the COLOR of the object.• How?

Brightness via the black body

• (draw Blackbody spectrum on board).• At different temperatures, the blackbody

spectrum peaks out at a different part of the spectrum.

• Hot stars peak in the blue – so they appear to be blue.

• Moderate stars peak in the middle, so appear to be yellow to white.

• Cooler stars peak in the red, so appear to be orange to red.

Color vs. color

• What happens if I were to compare the magnitudes of two different colors? Suppose I took the Blue color magnitude (B) and subtracted the brightness magnitude in the middle of the visual spectrum (V).

• For a hot star, will this value (B-V) be value be positive or negative?

B-V vs. color

• For a hot star, this value is NEGATIVE!• Reason, brighter means LOWER

magnitude. • The object is blue, so the B will be lower

than the V.• Will B-V increase or decrease as the

temperature of a star decreases?

B-V vs. temperature

• As the temperature drops, the B value drops.

• Meanwhile the V value does not change much.

• Therefore B-V increases as temperatures drop.

• In fact, a B-V value is the indicator of a specific temperature of star!

Color vs. temperature

• Since the color of a star depends on temperature, it turns out that Color, temperature, and B-V are ALL connected!

• But wait, there’s MORE!

Main sequence stars

• Ask you this again…• Over the course of its lifetime, how much

do the color and brightness of a main sequence star change?

• A) not much (maybe by 0.3 magnitudes)• B) moderate amount (0.5-1 magnitude)• C) considerable amount (2-3 magnitudes)• D) they go all over the place (> 4

magnitudes)

What determines the absolute brightness (and therefore

temperature) of a main sequence star?

• A) its age• B) its distance from us• C) its mass• D) its spin rate

Therefore:

• Any position on the Main Sequence has a one to one relationship with the mass, brightness, and color of the star.

• So, you can plot the Main Sequence as a line on a chart which compares the brightness to the color/temperature/color magnitude difference of ANY star!

HR Diagram

• HR Diagram is a log-log plot.• It plots brightness (either absolute or

apparent) vs. color or temperature or B-V.

http://outreach.atnf.c

siro.au/education/

senior/astrophysics/stellarevolution_hrintro.html

Clusters of stars

• Stars form in clusters.• If we plotted all the stars from a single

cluster what might we get?• First we should ask 2 questions:• 1) How do the distances from us compare

to all the stars in the cluster (close to same, or not close)?

• 2) How do the ages of the stars in the cluster compare?

http://www.shef.ac.uk/physics/teaching/phy103/

hrcluster.html• This is a VERY

young cluster!• All the stars are

main sequence stars.

• As the cluster ages, the biggest stars peel off (like peeling layers of an onion) and die.

• So, this chart evolves with time.

AGE!

• If you know the age of the stars that are starting to die, you know the age of the cluster!

• This point I called the “turn off point”.

• This cluster does not have a turn off point, which is very rare.

Distance

• You can also find the distance to this cluster.

• First, lets figure out what our sun would look like if it were in this cluster.

• From the earth the B-V of the sun is 0.68.

• Will that change with distance?

Distance

• B changes, and V change.

• With distance each get bigger (bigger = dimmer).

• However, they change by the same amount, so B-V is a CONSTANT!

• Therefore, we just need to compare V to the absolute magnitude of a star to find the distance!

Distance

• If the sun was in this cluster, what would it’s V value be?

• B-V from Earth is 0.68.

Distance from magnitude shift• A shift in magnitude gives us a factor. • The square root of this factor gives us the factor

in distance (since light spreads out over the radius squared).

• Since magnitudes are logarithmic, the equation is an exponential.

• To do this, find the V of the sun in the cluster. • The absolute magnitude of the sun is +5.0.• Find the difference between the two and call this

X (so X = V of sun if in cluster – 5.0)• Distance = 10 parsecs * 10X/5

For Pleiades

• Vsun would be about 10.

• So X = 10-5• X = 5D = 10 pc * 10(X/5)

D = 10 pc * 10(5/5)

• D = 100 parsec

Conclusion• On the main sequence you have a 1 to 1

relationship between color and mass.• Color = B-V = temperature • Since the top left stars on the main sequence die

first the top left is always peeling off of the main sequence.

• The position where there is turn off tells you the age of the cluster

• The comparison of absolute to apparent magnitudes tells you the distance to the cluster.