GM Multi Point Inspection Catalog Page 114 #7292-IMP Art Requirements Item Specs • 8-1/2” x 11” • 3-Part, Carbonless, Edge-Glued Form • Imprint a logo and up to 4 lines of text. This form can be imprinted with a logo and up to 4 lines of text at the imprinted price. Imprint area is approximately 2-1/2” wide x 1” tall. Manufacturer logos and trademarks are available for exclusive use by authorized dealers only. Additional Information Add your custom Crash imprint! Standard Stock Colors White Part 1 Canary Part 2 Pink Part 3 (All swatches colors are approximate representations.) Stock Color: White (Part 1), Canary (Part 2) & Pink (Part 3) Standard Ink Colors: Black, Blue, Red, Green Non-Standard Ink Colors: NA Proof Charge: Up to 3 Free Plate Charge: Yes Body Printing: No Screens & Gradients: NA PMS Match: NA Bleed: NA Standard Ink Colors (Including an Approximate Pantone Number) Black Blue (PMS 293C) Red (PMS 185C) Green (PMS 347C) Green (PMS 355C) Adobe Swatch Exchange Files for Stock & Ink Colors are available Production Notes (For Internal Use) Production: 085 • Crash Imprint • InDesign file created using pre-set template. EDGE GLUED ITEM #7292 - GENERAL MOTORS (GM) MULTI-POINT - 3PT - 8.5” x 11” - WHITE PART - FRONT Certified Service MULTI-POINT VEHICLE INSPECTION Name: Year/Model: Date: Repair Order #: VIN(last 8 digits): Odometer: Tag#: License#: Checked and OK May Require Attention Soon Requires Immediate Attention WIPER BLADES OnStar active Enrolled in OVD Enrolled in DMN Service History Check CHECK BATTERY Air Conditioning Performance Remaining engine oil life: % Reset: N/A: RF LF Rear (if applicable) Windshield condition Cracks Chips CHECK TIRES AND TREAD DEPTH Rotation needed Rotation performed Alignment needed Alignment performed Balance needed Balance performed Battery health Battery cables and connections LF 8/32 or Greater LR 8/32 or Greater (Check body condition) (Check lamps) 8/32 or Greater RF 8/32 or Greater RR 7/32 7/32 7/32 7/32 6/32 6/32 6/32 6/32 5/32 5/32 5/32 5/32 4/32 4/32 Lowest Tread Depth: /32 4/32 4/32 3/32 or Less 3/32 or Less LF Wear Pattern Damage RF 3/32 or Less 3/32 or Less PSI@: set to: PSI PSI@: set to: PSI LR RR PSI@: set to: PSI PSI@: set to: PSI CHANGE ENGINE OIL & FILTER N/A CHECK FLUID LEVELS OK FILLED REQUIRES ATTENTION Engine oil Brake fluid reservoir Transmission (if equipped w/dipstick) Coolant recovery reservoir Power steering Windshield washer ADDITIONAL CHECKS (Inspect for visible leaks and visual condition) Fuel system (also including gas cap seating) Engine, transmission, drive axle, transfer case Engine cooling system: leak/other Shocks and struts - also check operation Belts: engine, power steering and/or V-drive Hoses: engine, power steering and HVAC Engine air filter Passenger Compartment Air Filter Steering components and steering linkage CV drive axle boots or driveshafts and U-joints Exhaust system components Body components lubrication CHECK BRAKES/MEASURE FRONT AND REAR LININGS 7 mm greater 6 mm 5 mm LF RF 4 mm LR RR 3 mm/less 2 mm/less 1 mm/less Lowest Front Lining Lowest Rear Lining Brake system (also including lines, hoses and parking brake) Additional Recommended Services 1) 2) 3) Service Consultant: Technician: No.: Restraint system component check Chassis components lubrication Drive Axle (leak/other) Evaporative control system CUSTOMER COPY ACTUAL LF LR ACTUAL RF RR ACTUAL LF RF ACTUAL LR RR ITEM #7292 (Rev. 05-2018) MADE IN THE U.S.A.
7
Embed
GM Multi Point Inspection - ASP Automotive Service Products
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.