Page 1
211
GLOSSARY, METRIC CONVERSION DATA,DIMENSIONAL DATA DRAWINGS, INDEX,
TERMS AND CONDITIONS OF SALE
Glossary ............................................................................ Pages 212-215
Temperature and Metric Conversion Data ............................ Page 216
AWG to Metric Conversion Chart .......................................... Page 217
Dimensional Data Drawings ............................................ Pages 218-262
Catalog Number Index ..................................................... Pages 263-267
Terms and Conditions of Sale ................................................ Page 275
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 2
212
AFSNIT 107-2-01 The standard to which plugs and receptacles of the Danish configuration (DE1-10P and DE1-10Rrespectively) must be manufactured.
ANSI American National Standards Institute (ANSI) is a standards setting agency for the United States.
AS / NZS 3112 1993 The standard to which plugs and receptacles of the Australian configurations (AU1-10P, AU2-15P andAU1-10R, AU2-15R respectively) must be manufactured.
ASTA ASTA is a certification agency for the United Kingdom.
AWG American Wire Gauge. The standard system for designating the physical size of a current carrying wire.
BSI British Standards Institution (BSI) is the standards setting and certification agency for the United Kingdom.
BS 546A The standard to which plugs and receptacles of the United Kingdom configurations (UK2-15P and UK2-15R,respectively) must be manufactured. Wiring devices of these configurations are generally utilized in countries which were partof the United Kingdom when electricity was introduced into the country, i.e. South Africa and India.
BS 1363A The standard to which plugs and receptacles of the United Kingdom configuration (UK1-13P and UK1-13Rrespectively) must be manufactured. All plugs, rewireable and those molded on to power cords, must be equipped with aninternal fuse. Fuses are available in 3, 5, 10 and 13 ampere ratings. The rating of the plug is, therefore, contingent upon therating of the fuse which is installed into it.
C22.2, No. 42 The standard to which plugs and receptacles of Canada configuration (NEMA 5-15P and NEMA 5-15Rrespectively) must be manufactured. This configuration is the same as the plug and receptacle configuration which is utilized inthe United States.
Cable A group of insulated conductors twisted together and contained within an overall insulating jacket.
CCC China Compulsory Certification
CEBEC Comite Electrotechnique Belge (CEBEC) is the certification agency for Belgium.
CEE 7 The standard to which grounded plugs and receptacles of the Germany configuration must be manufactured. Thisconfiguration is commonly referred to as the SCHUKO configuration and is utilized throughout most of the continental Europe.
CEE 7-7 The standard to which grounded plugs and receptacles of the Germany configuration (EU1-16P and EU1-16Rrespectively) must be manufactured. Plugs that are manufactured to this standard have a slot in the face which allows the plugto mate with French and Belgian receptacles (FR1-16R). This configuration is commonly referred to as the “SCHUKO”configuration and is utilized throughout most of the continental Europe.
CEE 7-16 The standard to which non-grounded plugs and receptacles of the Germany configuration must be manufactured.The plug is commonly utilized throughout the continental Europe and is therefore often referred to as the ”Europlug”.
CEI Comitato Elettrotecnico Italiano (CEI) is the standards setting agency for Italy.
CEI 23-16/VII The standard to which plugs and receptacles of the Italian configurations (IT1-10P, IT2-16P and IT1-10R,IT2-16R respectively) must be manufactured.
CENELEC European Committee for Electrotechnical Standardization (CENLEC) is a standards setting agency which isresponsible for developing electrical standards that are universally acceptable to all CENELEC member nations. Austria,Belgium, Denmark, France, Federal Republic of Germany, Finland, Greece, Ireland, Italy, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom are members of CENELEC.
CSA Canadian Standards Association (CSA) is the standards setting and certification agency for Canada.
GLOSSARY
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 3
213
CSBS China State Bureau for Standardization (CSBS) is the standards setting agency for the People’s Republic of China.
DEMKO Dansk Elektroteknisk Komite (DEMKO) is the certification agency for Denmark.
Department of Fair Trading Australia
DIN Deutsches Institut fur Normung (DIN) is the standards setting agency for Germany.
Europlug Plug manufactured to the German standard CEE7-16. The plug is commonly utilized throughout the continentalEurope and is therefore often referred to as the ”Europlug”.
Filler A nonconducting material used in multiconductor cables to occupy the voids formed by the cabled conductors.
FIMKO FIMKO Limited (FIMKO) is the certification agency for Finland.
GB 1002-1996 & GB 2099.1-1996 The standard to which plugs and receptacles of the Chinese configurations (CH1-10P,CH2-16P and CH1-10R, CH2-16R respectively) must be manufactured.
Gost 7396 The standard to which plugs and receptacles of the Russian configuration must be manufactured. The plug issimilar to the German Schuko plug except the plug pins are 4.0 mm in diameter.
HAR Harmonized Cordage (HAR)
Harmonized Cordage Cordage that is manufactured in accordance with CENELEC’s Harmonization Documents HD-21 orHD-22. In order to identify a harmonized wire or cable, one of the following identification methods are required; (1) Printedletters (HAR) on either the overall jacket or insulation or (2) Printed tape or identification threads.
HD-21 CENELEC’s Harmonization Document HD-21 provides the specifications for polyvinyl chloride (PVC) insulated wireand cable.
HD-22 CENELEC’s Harmonization Document HD-22 provides the specifications for rubber insulated flexible cords andcables.
IEC International Electrotechnical Commision is an international committee that developes and publishes its recommenda-tions for standardising international wiring devices and products.
IEC 60309 (Formerly IEC 309 - CEE 17) International Electrotechnical Commision standard that applies to a series of heavyduty plugs and receptacles of a pin and sleeve design and that have a specific ampere/voltage rating for each individualconfiguration.
IEC 60320 (Formerly IEC 320) International Electrotechnical Commision standard that applies to a series of plugs,connectors, inlets and outlets designed for use on portable equipment such as computers, printers, medical equipment andother electrical or electronic equipment.
IMQ Instituto Italiano del Marchio di Qualita (IMQ) is the certification agency for Italy.
IP Ingress Protection (IP) - grades of protection against external solids contacting the conductors of a wiring device andagainst the penetration of liquids into the wiring device as per the standard established by International ElectrotechnicalCommision (IEC).
IP 44 or IP X4 Ingress protection is provided against solid bodies of dimensions above 1 mm diameter and againstsprinklings of water. These devices are typically considered to be “splashproof”.
IP 67 or IP X7 Ingress protection is provided against dust and against immersion under predetermined pressure and timeconditions. These devices are typically considered to be “watertight”.
GLOSSARY
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 4
214
GLOSSARY
Insulation A material having a high resistance to the flow of electrical current. Used to isolate conductors.
INTI Instituto Nacional de Technologia Industrial (INTI) is the testing agency for Argentina
IRAM Instituto Argentino de Racionalization de Materiales (IRAM) is the standards setting agency for Argentina.
IRAM 2073 & IRAM 2063 The standard to which plugs and receptacles of the Argentinian configuration (AR1-10P andAR1-10R respectively) must be manufactured.
Jacket The outer covering of a cable which provides protection against the environment.
JET Japan Electrical Testing Laboratory (JET) is the testing agency for Japan.
JIS Japanese Industrial Standards Committee Agency of Industrial Science & Technology (JIS) is the standards settingagency for Japan
JIS 8303 The standard to which grounded plugs and receptacles of the Japanese configuration (JA1-15P and JA1-15Rrespectively) must be manufactured.
KEMA NV tot Keuring van Elektrotechnische Materialen (KEMA) is the certification agency for the Netherlands.
LCIE Laboratoire Central des industries electriques (LCIE) is the certification agency for France.
MITI The Ministry of International Trade and Industry (MITI) is the organization to which all testing and/or approval agenciesin Japan belong. Dentori and JIS approvals are administered by MITI.
NEMA National Electrical Manufactures Association (NEMA) is a standards setting agency for the United States.
NEMA 5-15 The standard to which 15 ampere 125 volt grounded straight blade plugs and their corresponding receptacles ofthe North American configuration (NEMA 5-15P and NEMA 5-15R respectively) must be manufactured.
NEMA 5-20 The standard to which 20 ampere 125 volt grounded straight blade plugs and their corresponding receptacles ofthe North American configuration (NEMA 5-20P and NEMA 5-20R respectively) must be manufactured.
NEMA 6-15 The standard to which 15 ampere 250 volt grounded straight blade plugs and their corresponding receptacles ofthe North American configuration (NEMA 6-15P and NEMA 6-15R respectively) must be manufactured.
NEMA 6-20 The standard to which 20 ampere 250 volt grounded straight blade plugs and their corresponding receptacles ofthe North American configuration (NEMA 6-20P and NEMA 6-20R respectively) must be manufactured.
NEMA L5-15 The standard to which 15 ampere 125 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L5-15P and NEMA L5-15R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
NEMA L5-20 The standard to which 20 ampere 125 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L5-20P and NEMA L5-20R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
NEMA L5-30 The standard to which 30 ampere 125 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L5-30P and NEMA L5-30R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
NEMA L6-15 The standard to which 15 ampere 250 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L6-15P and NEMA L6-15R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 5
215
GLOSSARY
NEMA L6-20 The standard to which 20 ampere 250 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L6-20P and NEMA L6-20R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
NEMA L6-30 The standard to which 30 ampere 250 volt grounded locking plugs and their corresponding receptacles of theNorth American configuration (NEMA L6-30P and NEMA L6-30R respectively) must be manufactured. These wiring deviceshave a locking feature that is designed to prevent accidental disconnects.
NEMKO Norges Elektriske Materiellkontroll (NEMKO) is the certification agency for Norway.
Neoprene The Dupont trade name for polychloroprene a synthethic rubber which has the characteristics of good resistanceto oil, chemical and flame.
OVE Osterreichischer Verband Fur Elektrotechnik (OVE) is the certification agency for Austria.
PVC Polyvinyl chloride, a thermoplastic material used to insulate conductors and for cable jackets.
SAA Standards Assocition of Australia (SAA) is the standards setting agency for Australia.
SABS South African Bureau of Standards (SABS) is the standards setting agency for South Africa
SABS 164 The standard to which grounded plugs and receptacles of the South African configuration (UK2-15P and UK2-15Rrespectively) must be manufactured.
SANZ Standards Association of New Zealand (SANZ) is the standards setting agency for New Zealand.
Schuko Plugs and receptacles of the Germany configuration (EU1-16P and EU1-16R respectively) manufactured to theCEE 7-7 standard. Plugs that are manufactured to this standard have a slot in the face which allows the plug to mate withFrench and Belgian receptacles (FR1-16R) This configuration is commonly utilized throughout most of the continental Europe.
SEMKO Svenska Elektriska Materielkontrollanstalten AB (SEMKO) is the testing and certification agency for Sweden.
SEV Schweizerischer Electrotechnischer Verein (SEV) is the certification agency for Switzerland.
SEV 1011. 1959 The standard to which grounded plugs and receptacles of the Swiss configuration (SW1-10P and SW1-10Rrespectively) must be manufactured.
SI 32 The standard to which grounded plugs and receptacles of the Israeli configuration (IS1-16P and IS1-16R respectively)must be manufactured.
SII Standards Institution of Israel (SII) is the certification agency for Israel.
SJT UL cord type designation. Service Junior Thermoplastic jacket used for hard service applications.
SJTO UL cord type designation. Service Junior Thermoplastic Oil resistant jacket used for hard service applications.
SPT UL cord type designation. Service Parallel Thermoplastic.
SVT UL cord type designation. Service Vacuum Thermoplastic jacket not for use in hard service applications.
UL Underwtiters Laboratories (UL) is a testing agency for the United States.
UTE Union Technique de l’Electricite (UTE) is the standards setting agency for France.
VDE VDE Pruf und Zertifizierungsinstitut (VDE) is the certification agency for Germany.
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 6
216
TEMPERATURE AND METRIC CONVERSION DATA
°F ............. °C°F ............. °C°F ............. °C°F ............. °C°F ............. °C
140 ............... 60.00141 ............... 60.55142 ............... 61.11143 ............... 61.66144 ............... 62.22145 ............... 62.78146 ............... 63.33147 ............... 63.88148 ............... 64.44149 ............... 65.00150 ............... 65.56151 ............... 66.11152 ............... 66.66153 ............... 67.22154 ............... 67.77155 ............... 68.33156 ............... 68.88157 ............... 69.44158 ............... 70.00159 ............... 70.55
160 ............... 71.11161 ............... 71.66162 ............... 72.22163 ............... 72.77164 ............... 73.33165 ............... 73.89166 ............... 74.44167 ............... 75.00168 ............... 75.55169 ............... 76.11170 ............... 76.67171 ............... 77.22172 ............... 77.77173 ............... 78.33174 ............... 78.88175 ............... 79.44176 ............... 80.00177 ............... 80.55178 ............... 81.11179 ............... 81.66
180 ............... 82.22181 ............... 82.77182 ............... 83.33183 ............... 83.88184 ............... 84.44185 ............... 85.00186 ............... 85.55187 ............... 86.11188 ............... 86.66189 ............... 87.22190 ............... 87.78191 ............... 88.33192 ............... 88.88193 ............... 89.44194 ............... 90.00195 ............... 90.55196 ............... 91.11197 ............... 91.66198 ............... 92.22199 ............... 92.77
200 ............... 93.33205 ............... 96.11210 ............... 98.89215 ............. 101.67220 ............. 104.44225 ............. 107.22230 ............. 110.00235 ............. 112.78240 ............. 115.56245 ............. 118.33250 ............. 121.11255 ............. 123.89260 ............. 126.67265 ............. 129.44270 ............. 132.22275 ............. 135.00280 ............. 137.78285 ............. 140.55290 ............. 143.33295 ............. 146.11
300 ............. 148.89305 ............. 151.67310 ............. 154.44315 ............. 157.22320 ............. 160.00325 ............. 162.78330 ............. 165.56335 ............. 168.33340 ............. 171.11345 ............. 173.89350 ............. 176.67355 ............. 179.44360 ............. 182.22365 ............. 185.00370 ............. 187.78375 ............. 190.55380 ............. 193.33385 ............. 196.11390 ............. 198.89
395 ............. 201.67
Temperature Conversion Data
Metric Conversion FactorsLengthInch x 25.4 = MillimetersMillimeters x 0.03937 = InchesFeet x 0.3048 = MetersMeters x 3.281 = Feet
MassOunce x 28.35 = GramGram x 0.03527 = OuncePound x 0.4536 = KilogramKilogram x 2.205 = Pound
AreaSquare Inch x 6.452 = Square CentimeterSquare Centimeter x 0.1550 = Square InchSquare Foot x 0.0929 = Square MeterSquare Meter x 10.76 = Square Foot
VolumeCubic Inch x 16.39 = Cubic CentimeterCubic Centimeter x 0.06102 = Cubic InchCubic Foot x 0.02832 = Cubic MeterCubic Meter x 35.31 = Cubic Foot
InchesFraction Decimal mm
Fractions to Decimals to Millimeters Conversion Chart
1/64 0.0156 0.39691/32 0.0312 0.79383/64 0.0468 1.19061/16 0.0625 1.58755/64 0.0781 1.98443/32 0.0937 2.38127/64 0.1093 2.77811/8 0.1250 3.1750
9/64 0.1406 3.57195/32 0.1562 3.9688
11/64 0.1718 4.36563/16 0.1875 4.7625
13/64 0.2031 5.15947/32 0.2187 5.5562
15/64 0.2343 5.95311/4 0.2500 6.3500
17/64 0.2656 6.74699/32 0.2812 7.1438
19/64 0.2968 7.54065/16 0.3125 7.9375
21/64 0.3281 8.334411/32 0.3437 8.731223/64 0.3593 9.1281
3/8 0.3750 9.525025/64 0.3906 9.921913/32 0.4062 10.318827/64 0.4218 10.71567/16 0.4375 11.1125
29/64 0.4531 11.509415/32 0.4687 11.906231/64 0.4843 12.3031
1/2 0.5000 12.7000
33/64 0.5156 13.096917/32 0.5312 13.493835/64 0.5468 13.89069/16 0.5625 14.2875
37/64 0.5781 14.684419/32 0.5937 15.081239/64 0.6093 15.4781
5/8 0.6250 15.875041/64 0.6406 16.271921/32 0.6562 16.668843/64 0.6718 17.065611/16 0.6875 17.462545/64 0.7031 17.859423/32 0.7187 18.256247/64 0.7343 18.6531
3/4 0.7500 19.0500
49/64 0.7656 19.446925/32 0.7812 19.843751/64 0.7968 20.240613/16 0.8125 20.637553/64 0.8281 21.034427/32 0.8437 21.431255/64 0.8593 21.8281
7/8 0.8750 22.225057/64 0.8906 22.621929/32 0.9062 23.018859/64 0.9218 23.415615/16 0.9375 23.812561/64 0.9531 24.209431/32 0.9687 24.606263/64 0.9843 25.0031
1 1.0000 25.4000
InchesFraction Decimal mm
InchesFraction Decimal mm
InchesFraction Decimal mm
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 7
217
Metric Conductor Maximum Current Cross-Sectional American Wire Maximum CurrentSize (mm2) Carrying Capacity Area (mm2) Gauge Size (AWG) Carrying Capacity
at 20°C (Amperes) (Amperes) *
0.75 10 0.75 --- ---
--- --- 0.82 18 10
1.00 15 1.00 --- ---
--- --- 1.31 16 13
1.50 20 1.50 --- ---
--- --- 2.08 14 18
2.50 25 2.50 --- ---
--- --- 3.31 12 25
4.00 34 4.00 --- ---
--- --- 5.26 10 30
6.00 44 6.00 --- ---
--- --- 8.37 8 40
10.00 61 10.00 --- ---
AWG TO METRIC (mm2) CONVERSION CHARTMETRIC CONVERSION FACTORS
* These are the Underwriters’ Laboratories, Inc. & National Electric Code Standard for 2 and 3conductor rubber or plastic cords. The current rating for cord with 4 or 6 conductors is 80% of the valueshown.
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 8
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 30140 Page No. 118
Cat. No. 30120 Page No. 117
Cat. No. 24QEL Page No. 199
Cat. No. 007879-007890 Page No. 198
Cat. No. 30150 Page No. 118
Cat. No. 30130 Page No. 117
Cat. No. 30110 Page No. 116
Cat. No. 30100 Page No. 116
Cat. No. 12QEL Page No. 199
83 4583
66
50
74.435.5
N
N
112124254
180
362
254 124
112 26.5
45.542 DIA.
45.5
26.5
42 DIA.
DIA.2123
50
45 64 6445
50
23 21 DIA.
49.5
48 6542
4.0 DIA.TYPICAL
43 DIA. 63
44
218
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 9
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 30210 Page No. 69
Cat. No. 30195 Page No. 67
Cat. No. 30182 Page No. 119
Cat. No. 30180 Page No. 117
Cat. No. 30160 Page No. 118
Cat. No. 30220 Page No. 116
Cat. No. 30200 Page No. 116
Cat. No. 30190 Page No. 119
Cat. No. 30181 Page No. 119
Cat. No. 30170 Page No. 118
4.8 DIA.TYPICAL
43 DIA.44
63
46
DIA.41 723320
27
59
4770 4.8 DIA.TYPICAL27
70
59
45
4.0 DIA.TYPICAL27
45
59
70
37
40 7152
44DIA
55 DIA.8052
36
3627
47.5
34DIA
43 DIA
28
50
43.5DIA.
67.548
219
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 10
220
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 30320 Page No. 120
Cat. No. 30300 Page No. 120
Cat. No. 30260 Page No. 116
Cat. No. 30240 Page No. 69
Cat. No. 30225 Page No. 119
Cat. No. 30330 Page No. 120
Cat. No. 30301 Page No. 120
Cat. No. 30295 Page No. 76
Cat. No. 30250 Page No. 117
Cat. No. 30230 Page No. 119
4867
36
36
38.5
44 58
39
3958 DIA.50
36
35.5 4927.5
50
36
36
27
41 DIA.49
6844 DIA
24
1933
14 424.0 DIA.TYPICAL
24
1933
14 424.8 DIA.TYPICAL
3822
44.5
47
41
33
1424
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 11
221
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 38041 Page No. 199
Cat. No. 30510 Page No. 82
Cat. No. 30395 Page No. 77
Cat. No. 30350 Page No. 121
Cat. No. 30340 Page No. 121
Cat. No. 4300.0701 Page No. 155
Cat. No. 3232-I Page No. 155
Cat. No. 30500 Page No. 82
Cat. No. 30360 Page No. 67
Cat. No. 30340A Page No. 121
41
33
1424
41
33
1424
33 DIA
4426
14
48
245338
43DIA
36DIA
61.542
24
25
26
47
30
36 DIA. 6041
66
25.933
83.3(3 9/32")
42.5
75 63
27 47
10
24
3.7
8.5
22.110.6
9.1
18
27
27
PANEL THICKNESS L0.81.01.21.6
24.625.226.2
24
L
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 12
222
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 4720-SSAN Page No. 163
Cat. No. 4715-SS Page No. 163
Cat. No. 4700 Page No. 163
Cat. No. 4550 Page No. 164
Cat. No. 4300.0702 Page No. 155
Cat. No. 4QEL Page No. 199
Cat. No. 4716-SS Page No. 163
Cat. No. 4710 Page No. 163
Cat. No. 4560 Page No. 164
Cat. No. 4300.0703 Page No. 155
±0.524.6
X
27
27
30.5
5 PANEL THICKNESS X
0.8 - 1.2+ 24.624.81.3 - 2.0+
2.1 - 3.0+ 25
MOUNTING ARRANGEMENT
110 124112 50
95
120 165180
M3(4) PLCS
24.81.3 - 1.6+24.60.8 - 1.2+
XPANEL THICKNESS
9
24
10
27
27
X
24.6±0.5
3.5
69.1
38.1 29.223.9
83.3(3 9/32")
34.9#6-32 TH'D.
38.1
28.623.4
60.383.3(3 9/32")
66.9
23.830.438.1
33.6
83.3(3 9/32")
#6-32 TH'D.
102.457.260.3
25.430.636.5
34.9
83.3(3 9/32")
65.1 DIA.
4.0 X 6.3 4.0 DIA.
PANEL CUTOUT
53.2 53.234.91.8
DIA.42.2
40.3
44.4
65.1 DIA.
4.0 X 6.3 4.0 DIA.
44.4
53.2
PANEL CUTOUT
53.2
DIA.43.8
42.01.8
35.7 DIA.
54.2
33.8
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 13
223
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5258-I Page No. 155
Cat. No. 5251-I Page No. 155
Cat. No. 5242 Page No. 155
Cat. No. 52170 Page No. 107
Cat. No. 52019 Page No. 106
Cat. No. 5266-HGAN Page No. 154
Cat. No. 5258 Page No. 155
Cat. No. 5242-I Page No. 155
Cat. No. 52205 Page No. 67
Cat. No. 52160 Page No. 107
76.2 (3")
465.1 (18.31")482.6 (19")
6.4 X 9.5 (0.25" X 0.375") SLOTS (.094")2.38
88.1(3.47") 26
384
53
64
27
297
FUSE
54
33
282
66.9
25.933.6
83.3(3 9/32") 66.9
25.933.6
83.3(3 9/32")
83.3(3 9/32") 60.2
33.5 27
50
35
36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5
36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5
345538.5
53.5
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 14
224
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5278-SS Page No. 156
Cat. No. 52765-10 Page No. 106
Cat. No. 5269-XHG Page No. 154
Cat. No. 5266-XHG Page No. 154
Cat. No. 5266-SSAN Page No. 156
Cat. No. 5279-SS Page No. 156
Cat. No. 52765-30 Page No. 106
Cat. No. 5276-BK Page No. 156
Cat. No. 5269-X Page No. 156
Cat. No. 5266-X Page No. 156
38 DIA. 72.551
6738.5 DIA.
DIA.34.5
44.5
38 DIA. 72.551
6738.5 DIA.
DIA.34.5
44.5
38.9DIA
21.4 46.741.7
4
148
529
8544
6028
148
4
148
529
8544
6028
148
42
43.8DIA.
53.253.21.8
44.4
65.1 DIA.
4.0 X 6.34.0 DIA.
PANEL CUTOUT
42.2DIA
PANEL CUTOUT
4.0 DIA.
44.4
53.265.1 DIA.
4.0 X 6.31.8 34.953.2
40.3
345538.5
53.5
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 15
225
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5351-I Page No. 159
Cat. No. 5342 Page No. 159
Cat. No. 5296-BK Page No. 156
Cat. No.52925 Page No. 106
Cat. No. 52855 Page No. 106
Cat. No. 5358 Page No. 159
Cat. No. 5342-I Page No. 159
Cat. No. 53326 Page No. 109
Cat. No. 52955 Page No. 108
Cat. No. 52855-A Page No. 106
4
814
44
60
14
614
8
4
814
44
60
148
48
594
60
44
4
81414
8
403 403
60
1450
814
8
4
38.9DIA 54.4
59.4
19
18250
48
26.5315
320.5
MOUNTING ARRANGEMENT
4 DIAMETER
66.9
25.933.6
83.3(3 9/32")
66.9
25.933.6
83.3(3 9/32")
35
27
50
33.5
60.2(3 9/32")83.3 36
35
44.5
25.419.3
37.844.5
#8-32 TAP 4.5 DIA.
PANEL CUTOUT
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 16
226
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5378-SS Page No. 160
Cat. No. 5369-XHG Page No. 154
Cat. No. 5366-XHG Page No. 154
Cat. No. 5366-SSAN Page No. 160
Cat. No. 5358-I Page No. 159
Cat. No. 5379-SS Page No. 160
Cat. No. 5374-BK Page No. 160
Cat. No. 5369-X Page No. 160
Cat. No. 5366-X Page No. 160
Cat. No. 5366-HGAN Page No. 154
36
35
44.5
25.419.3
37.844.5
#8-32 TAP 4.5 DIA.
PANEL CUTOUT
345538.5
53.5
345538.5
53.5
38 DIA. 72.5
51
38 DIA. 72.5
51
DIA
38.5 DIA 67
34.5
44.5
DIA
38.5 DIA 67
34.5
44.5
38.9DIA 54.4
59.4
42
43.8DIA.
53.253.21.8
44.4
65.1 DIA.
4.0 X 6.34.0 DIA.
PANEL CUTOUT
42.2DIA
PANEL CUTOUT
4.0 DIA.
44.4
53.265.1 DIA.
4.0 X 6.31.8 34.953.2
40.3
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 17
227
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 56125 Page No. 76
Cat. No. 5478-SS Page No. 162
Cat. No. 5469-X Page No. 162
Cat. No. 5466-X Page No. 162
Cat. No. 54406 Page No. 110
Cat. No. 56205 Page No. 77
Cat. No. 5479-SS Page No. 162
Cat. No. 5469-XHG Page No. 154
Cat. No. 5466-XHG Page No. 154
Cat. No. 5466-SSAN Page No. 154
45
23
4 x 6 SLOT
215203191
345538.5
53.5
38 DIA. 72.551
38 DIA. 72.551
DIA
6738.5 DIA.
34.5
44.5
DIA
6738.5 DIA.
34.5
44.5
42
43.8DIA.
53.253.21.8
44.4
65.1 DIA.
4.0 X 6.34.0 DIA.
PANEL CUTOUT
42.2DIA
PANEL CUTOUT
4.0 DIA.
44.4
53.265.1 DIA.
4.0 X 6.31.8 34.953.2
40.3
4 DIAMETER
35
11
57
28325
29415.5
MOUNTING ARRANGEMENT
M424
12 322
350
MOUNTING ARRANGEMENT
52
3542
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 18
228
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5666-X Page No. 158
Cat. No. 5666-BK Page No. 158
Cat. No. 5658 Page No. 157
Cat. No. 56504 Page No. 82
Cat. No. 56305 Page No. 77
Cat. No. 5666-XHG Page No. 154
Cat. No. 5666-SSAN Page No. 154
Cat. No. 5658-I Page No. 157
Cat. No. 5651-I Page No. 157
Cat. No.5642-I Page No. 157
39
M424
12 322
350
MOUNTING ARRANGEMENT
52
35
(3 9/32")83.3
33.6 25.9
66.9
40
25
2101957.5
4 DIA.4 PLCS.
25
50
35
27
83.3(3 9/32") 60.2
33.5
36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5 36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5
38.9DIA
21.4 46.741.7 34
5538.5
53.5
5172.538 DIA.
5172.538 DIA.
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 19
229
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 5858-I Page No. 161
Cat. No. 5851-I Page No. 161
Cat. No. 5679-SS Page No. 158
Cat. No. 5669-XHG Page No. 154
Cat. No.5669-BK Page No. 158
Cat. No. 5862-I Page No. 161
Cat. No. 5858 Page No. 161
Cat. No. 5765-BK Page No. 160
Cat. No. 5678-SS Page No. 158
Cat. No. 5669-X Page No. 158
54.459.438.9
DIA 6738.5 DIA.
DIA.34.5
44.5
6738.5 DIA.
DIA.34.5
44.5
42
43.8DIA.
53.253.21.8
44.4
65.1 DIA.
4.0 X 6.34.0 DIA.
PANEL CUTOUT
42.2DIA
PANEL CUTOUT
4.0 DIA.
44.4
53.265.1 DIA.
4.0 X 6.31.8 34.953.2
40.3 38.9DIA 41.7
46.721.4
27
35
5083.3(3 9/32")
60.2
33.5
36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5
36
8-32 TAP
35
PANEL CUTOUT
4.5 DIA.
44.5
25.419.3
37.844.5 66.9
25.933.6
83.3(3 9/32")
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 20
230
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 69214 Page No. 201
Cat. No. 681485 Page No. 200
Cat. No. 681348 Page No. 200
Cat. No. 60620 Page No. 201
Cat. No. 5864-BK Page No. 162
Cat. No. 69222 Page No. 201
Cat. No. 69204 Page No. 201
Cat. No. 681386 Page No. 200
Cat. No.60684 Page No. 201
Cat. No. 5866-BK Page No. 162
38.9DIA
21.4 46.741.7
38.9DIA 54.4
59.4
MOUNTING ARRANGEMENT
441 76
55
225 108
27.55 DIA.
3819270
31020
5 x 10SLOTS
118
250 DIA. 118
200 DIA.170
10295
203
5 DIA.(2) PLCS.
7
5 x 9SLOT
30190
122128115
8 DIA. (2)PLCS215 30
27.5
87
55335
8 DIA. (2)PLCS
27.5
87
55631
95440
8 DIA. (2)PLCS
27.5
551241
150941
87
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 21
231
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 70117 Page No. 61
Cat. No. 70114 Page No. 61
Cat. No. 70110-BLK Page No. 61
Cat. No. 70100x45 Page No. 96
Cat. No. 70118 Page No. 61
Cat. No. 70116 Page No. 61
Cat. No. 70115 Page No. 61
Cat. No. 70110-RED Page No. 61
Cat. No. 70110 Page No. 61
45 40
45
PANEL CUTOUT
45
40
4040
344052
40
52
3.5 DIA. 3.5 DIA.
PANEL CUTOUT
45
40
4040
344052
40
52
3.5 DIA. 3.5 DIA.
PANEL CUTOUT
45
40
4040
344052
40
52
3.5 DIA. 3.5 DIA.
5260
80
2448121
65
55M3 THRU2 PLCS.
MOUNTING ARRANGEMENT NO.1CUTOUT FOR PANEL MOUNTING
MOUNTING ARRANGEMENT NO.2CUTOUT FOR WALL MOUNTING ONSHEETROCK AND WOODEN PANELS
MOUNTINGARRANGEMENT
47
38
58
58
M4(2) PLCS.
M4(2) PLCS38
41
58
47100
MOUNTINGARRANGEMENT
41
M4(2) PLCS.
14041
47
58 38
MOUNTINGARRANGEMENT
46
2742100
104
MOUNTINGARRANGEMENT
M4(2) PLCS.
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 22
232
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 70139 Page No. 60
Cat. No. 70130-BLK Page No. 60
Cat. No. 70125 Page No. 61
Cat. No. 70120 Page No. 61
Cat. No. 70140 Page No. 60
Cat. No. 70130A Page No. 60
Cat. No. 70130 Page No. 60
Cat. No. 70127 Page No. 64
Cat. No. 74225 Page No. 85
(4) 3.5 DIA
4461.5
3850
3850
39.524 38
38
3
PANEL CUTOUTNOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
4.0 DIA.4 PLCS
4.5 DIA.2 PLCS
16.5
50.5
21
39
44.238
3830.5
27
38
656038
38.553.5
FLUSH MOUNTING
SURFACE MOUNTING
2.5 DIA
53 DIA38
4135
38
36 19 3419
44
4.8 DIA.
1950
40
40
4.8DIA.
4.0 DIA.
10 DIA.MAXIMUM
1953
34 41 DIA.
4.0 DIA. TYP.4063
1815
33
4.8 DIA19
19 60
36
36
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
(2) M376
3712283
Page 23
233
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 70190 Page No. 60
Cat. No. 70170 Page No. 60
Cat. No. 70150 Page No. 60
Cat. No. 70142 Page No. 60
Cat. No. 70140-RCD Page No. 60
Cat. No. 70195 Page No. 60
Cat. No. 70180 Page No. 60
Cat. No. 70161 Page No. 60
Cat. No. 70142A Page No. 60
Cat. No. 70141 Page No. 60
4.8 DIA19
19 60
36
36
4.8 DIA.
19 60.5
36.5
1936.5
4.0 DIA.
36
741936.5 93
4.8 DIA19
1151942 DIA.
7.5DIA.
45
47
95
7019
53 DIA19
125
M4
MOUNTINGARRANGEMENT
68
68127
83
998783
M4
MOUNTINGARRANGEMENT
68
68127
83
9983
PANEL CUTOUT3.5 DIA.
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
5829
18.5
3731
5870
70 5039
145126
4582.5
5060
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 24
234
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 70341 Page No. 62
Cat. No. 70325 Page No. 62
Cat. No. 70300 Page No. 62
Cat. No. 70225 Page No. 61
Cat. No. 70198 Page No. 63
Cat. No. 70361 Page No. 62
Cat. No. 70325A Page No. 62
Cat. No. 70310 Page No. 62
Cat. No. 702708 Page No. 200
Cat. No. 70200x45 Page No. 86
4.5 DIA4 PLCS
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
35
70
6497.5
97.5 7454
22
PANEL CUTOUT
38123
123.5O
TEST
C16
30
81 72
60145
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LIDS BROKEN
26DIA
1200
PANEL CUTOUT
58
69.5
54.533
72
42
DIA. 5.52 PLACES
33.55575
604282.5
60DIA 5.5 TYP
PANEL CUTOUT
81105
88
38 38
88
10581
FOR CLARITY THESE VIEWS ARE SHOWN WITHOUT COVER
64 DIA
7-14 DIA
118
7-14 DIA
134.5 72
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 25
235
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 72100x45 Page No. 96
Cat. No. 71200x45 Page No. 87
Cat. No. 71161 Page No. 63
Cat. No. 71110 Page No. 64
Cat. No. 70395 Page No. 62
Cat. No. 72105x45 Page No. 97
Cat. No. 71225 Page No. 64
Cat. No. 71170 Page No. 63
Cat. No. 71120 Page No. 64
Cat. No. 71100x45 Page No. 96
PANEL CUTOUTFOR CLARITY THESE VIEWS ARESHOWN WITHOUT COVER
42 60
60
75
75916.5 (4) 5.5 DIA
45 38
45
3 DIA
PANEL CUTOUT
40
27
504
313556
40
56 40
40
(2) 3 DIA
38
4450 38
5038
61.5
PANEL CUTOUTNOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
38
(4) 3.5 DIA343.7
32
44 DIA
10 DIA
56
82
19
DIA 12857
38123
123.5O
TEST
C16
30
45
45
30
ON
67.5
45
1528
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LIDS BROKEN
OFFTEST
ON-RESET
7187
128 53
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 26
236
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 72150 Page No. 65
Cat. No. 72140-RCD Page No. 65
Cat. No.72130-BLK Page No. 65
Cat. No. 72120 Page No. 66
Cat. No. 72110 Page No. 66
Cat. No. 72160-BLK Page No. 65
Cat. No. 72141 Page No. 65
Cat. No. 72140 Page No. 65
Cat. No. 72130 Page No. 65
Cat. No. 72110-BLK Page No. 66
(2) 3.5 DIA
68
PANEL CUTOUT
60.350 DIA.49.2
22.2
22.253.2
825
PANEL CUTOUT
50
28.22.5
55
70 49DIA
(2) 3.5 DIA
60.3
44
38
38
PANEL CUTOUT
6134
5413
33
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
(4) 3.5 DIA
7650
224552
7650
224552 50.9
25.2
56
48.2
FUSE
53 47.570.5
102
50.925.2
56
48.2
58 DIA
80
103
FU
SE 76 72
55 27
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 27
237
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 72350 Page No. 81
Cat. No. 72320 Page No. 66
Cat. No. 72300-DSM Page No. 66
Cat. No. 72300 Page No. 66
Cat. No. 72215 Page No. 66
Cat. No. 72355 Page No. 85
Cat. No. 72325 Page No. 66
Cat. No. 72316 Page No. 66
Cat. No. 72300-D Page No. 66
Cat. No. 72220 Page No. 66
326085
85
14
1114
1637
85
8560
TEST
OFF
ON
85
146121 11
32
32
14
121146
85
11
14
1637
121146
85 TEST
ON
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LIDS BROKEN
144 58
7281
M3 (4) PLACES
(3) 20 DIA. KNOCKOUTS
70 SQ.
7560
35
60
75
(2) 20 DIA. KNOCKOUTSTHIS SIDE OF BOX
(2) 20 DIA.KNOCKOUTS
(2) 20 DIA. KNOCKOUTSTHIS SIDE OF BOX
(2) 20 DIA. KNOCKOUTSTHIS SIDE OF BOX
M3 (2) PLACES
(4) 20 DIA.KNOCKOUTS
(2) 20 DIA.KNOCKOUTS
47135130121
7569
(3) 20 DIA. KNOCKOUTS(1) 25 DIA. KNOCKOUTTHIS SIDE OF BOX
(1) 20 DIA. KNOCKOUT(1) 25 DIA. KNOCKOUTTHIS SIDE OF BOX
(3) 20 DIA. KNOCKOUTS(1) 25 DIA. KNOCKOUTTHIS SIDE OF BOX
86
120 2140146
TEST
SET
8690
3851.5150
SET
TEST
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 28
238
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 73130 Page No. 67
Cat. No. 73100x45 Page No. 97
Cat. No. 72450 Page No. 85
Cat. No. 72403, 72405, 72410, 72413 Page No. 65
Cat. No. 72360 Page No. 81
Cat. No. 73160 Page No. 67
Cat. No. 73110 Page No. 67
Cat. No. 72495 Page No. 66
Cat. No. 72440 Page No. 85
Cat. No. 72365 Page No. 85
M3 (2) PLCS
50
89
8960
M3 (2) PLCS
42149
89
121
6 DIA.25
4.5 DIA (4) PLCS5487
116120146 51
1352
146 120
86
(2) 3.0 DIAMETER
R4 TYP50 45
43.547
51.558 212
PANEL CUTOUT
3726.5
45
67.5
86 60 52
8621
32
32.560
9056
50 5223
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 29
239
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 74105x45 Page No. 97
Cat. No. 74100 Page No. 70
Cat. No. 73550 Page No. 67
Cat. No. 73330 Page No. 68
Cat. No. 73210 Page No. 67
Cat. No. 74110 Page No. 70
Cat. No. 74100-BLK Page No. 70
Cat. No. 73570 Page No. 67
Cat. No. 73530 Page No. 67
Cat. No. 73310 Page No. 68
(2) 4.0 DIA54.0 DIA
49.6DIA.
PANEL CUTOUT
60.350.873.8 25.6
32.730.425.4
86
8660
13
3310
48
4020
4120
4952
53
44.6 DIA
(2) M3
(2) 5 X 9 SLOTS48 32
23
6084
9445120
76 8
60
5
(2) 4 X 5 SLOTS
35 DIA
24
6049
42 30
(2) 4 X 5 SLOTS
35 DIA
24
6049
42 30
45
45
41
(2) 4 X 12 SLOTS
(2) M3
35 DIA 988460
233042
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 30
240
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 74180 Page No. 69
Cat. No. 74140-RCD Page No. 69
Cat. No. 74140 Page No. 69
Cat. No. 74130 Page No. 69
Cat. No. 74110-BLK Page No. 70
Cat. No. 74200 Page No. 70
Cat. No. 74141 Page No. 69
Cat. No. 74140-BLK Page No. 69
Cat. No. 74131 Page No. 69
Cat. No. 74120 Page No. 70
(2) 4 X 12 SLOTS
(2) M3
35 DIA 988460
233042 41
2583
117 95 10525
70
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
4 DIA.54
27
9.554
PANEL CUTOUT
44 DIA
56
4525
44 DIA
56
4525
8.5 DIA
40.3 DIA
40.7
61.842.8
8.5 DIA
40.3 DIA
40.7
61.842.8
99
42 70.546.5
42 DIA 7353
(2) 4 DIA56
DIA
84 DIA
4 DIA. THRU7 DIA. C'BORE PANEL CUTOUT
70
58
7052
8
4 DIA.2 PLCS.
PANEL CUTOUT
83 (3 9/32")
50
83
7016
42
70
114
OFFTEST
RESETON
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 31
241
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 74459x45 Page No. 99
Cat. No. 74457x45 Page No. 99
Cat. No. 74453x45 Page No. 99
Cat. No. 74335 Page No. 87
Cat. No. 74210 Page No. 70
Cat. No. 74500 Page No. 71
Cat. No. 74458x45 Page No. 99
Cat. No. 74456x45 Page No. 99
Cat. No. 74452x45 Page No. 99
Cat. No. 74220 Page No. 70
72
1624116
84
116 84
7216
36
83 72
58144
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LIDS BROKEN
ON
TEST
3042
45
45
O
3042
45
45
O
4330
45
45
O
TEST
4330
45
45
O
TEST
4330
45
45
O
TEST
4330
45
45
O
TEST
(2) 4 X 5 SLOTS
35 DIA
243042
6050
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 32
242
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 74560-BLK Page No. 69
Cat. No. 74541 Page No. 71
Cat. No. 74540 Page No. 71
Cat. No. 74520 Page No. 71
Cat. No. 74505x45 Page No. 97
Cat. No. 74600x45 Page No. 80
Cat. No. 74560 Page No. 69
Cat. No. 74540-BLK Page No. 71
Cat. No. 74530 Page No. 71
Cat. No. 74510 Page No. 71
45
45 23
(2) 4 X 12 SLOTS
(2) M3
35 DIA 988460
233042
PANEL CUTOUT
4125
83
117 95 10525
70
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
5427
9.554
(4) 4 DIA
44 DIA25
45
56
40.2 DIA 62.342.3
40.3
40.2 DIA 62.342.3
40.3
42 DIA51
71
41.2DIA
60°
82.567.3
7.11
41.2DIA
60°
82.567.3
7.11
32
45
45
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 33
243
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 75140 Page No. 72
Cat. No. 75100x45 Page No. 96
Cat. No. 74730 Page No. 79
Cat. No. 74700x45 Page No. 79
Cat. No. 74615 Page No. 80
Cat. No. 75160 Page No. 72
Cat. No. 75130 Page No. 72
Cat. No. 74790 Page No. 79
Cat. No. 74715 Page No. 79
Cat. No. 74630 Page No. 80
2712
87
87
6044
52
4823
45
304560
87
8712
27
49
40 40
21
4.5DIA.
58.5
6098 45
110112
INSIDE VIEW
4 GASKET
45 36
22.5 4.0 DIAMETER
19
44
6647
18
4.0 DIAMETER4063
15
33
5761 41
21
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 34
244
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 76140 Page No. 74
Cat. No. 76110 Page No. 74
Cat. No. 76100x45 Page No. 96
Cat. No. 75530 Page No. 73
Cat. No. 75500x45 Page No. 96
Cat. No. 76143x45 Page No. 96
Cat. No. 76120 Page No. 74
Cat. No. 76101x45 Page No. 96
Cat. No. 75540 Page No. 73
Cat. No. 75520 Page No. 72
45 36
22.5
(4) 3.5 DIA
38
38
44
39.5
61.5 38
14.55038
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
PANEL CUTOUT
20
52
6243 5.0 DIAMETER
2017
406643
45
22.5
3545
45
35
PANEL CUTOUT19
6
32
56
9.5
36.8
62.2 336.35
(4) 3.5 DIA
38
38
44
23.337.7
61.5
3850
3850
3
PANEL CUTOUTNOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
18 6
1935
5068
23
45
45
35
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 35
245
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 77115 Page No. 76
Cat. No. 77100x45 Page No. 96
Cat. No. 76540 Page No. 75
Cat. No. 76515 Page No. 75
Cat. No. 76160 Page No. 74
Cat. No. 77130 Page No. 76
Cat. No. 77110 Page No. 76
Cat. No. 76560 Page No. 75
Cat. No. 76520 Page No. 75
Cat. No. 76510 Page No. 75
65.5 43.5
9.519
6
27.8
9 DIA
MOUNTING ARRANGEMENT
3.5 DIA.
60 56
56
86
404886
3.5 DIA.
35
384960
70
MOUNTINGARRANGEMENT
3.5 DIA.
443850
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
61.5
5038 23.3
38
38
CUTOUT FORPANEL MOUNTING
38.7
65.5 43.5
27.8
37
45
45
(2) 3.5 DIA
PANEL CUTOUT
60505385
85
38
27.532
47 DIA57 31
2547
40
PANEL CUTOUT
(2) 3.5 DIA
39 DIA19
47.5
44
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
77
36
24
58
35
18
Page 36
246
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 78230 Page No. 77
Cat. No. 78140 Page No. 77
Cat. No. 78120 Page No. 77
Cat. No. 77190 Page No. 76
Cat. No. 77140 Page No. 76
Cat. No. 78500 Page No. 82
Cat. No. 78160 Page No. 77
Cat. No. 78130 Page No. 77
Cat. No. 78117 Page No. 77
Cat. No. 77160 Page No. 76
10 DIA
37DIA
64.545.5
50 DIA
11 DIA
65
2635
70 DIA
65
5049
PANEL CUTOUT
(4) M3
PANEL CUTOUT
40
404966
66 29.48.5
3.5 DIA.
5022
44
45 3860 50
38
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED PANEL CUTOUT
48
37 5132
37 DIA34
53 42 DIA 57
51
48
3732 5 X 10 SLOT 21
27
105
35
83(3 9/32")
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 37
247
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 78605 Page No. 83
Cat. No. 78570 Page No. 82
Cat. No. 78550 Page No. 82
Cat. No. 78530 Page No. 82
Cat. No. 78510 Page No. 82
Cat. No. 78610 Page No. 83
Cat. No. 78600 Page No. 83
Cat. No. 78560 Page No. 82
Cat. No. 78540 Page No. 82
Cat. No. 78520 Page No. 82
(2) 3.5 DIA
(2) 3.5 DIA
35 DIA37 DIA
4235.549 42
2420
PANEL CUTOUT
38 DIA 75
5438 DIA
5273
52
38 4423
70
115
105
5
115 60 35.5
70 10
5 X 10 SLOT
38 3630
105 83(3 9/32")
3630
38
105 83(3 9/32")
5 X 10 SLOT (2) 3.5 DIA
35.5
35 3227
68
PANEL CUTOUT
60(2 3/8")
94
121924
83.5(3 9/32") 60.5
36.5 DIA
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 38
248
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 79240x45 Page No. 100
Cat. No. 79230x45 Page No. 100
Cat. No. 79120x45 Page No. 79
Cat. No. 79100x45 Page No. 79
Cat. No. 78620 Page No. 83
Cat. No. 79245x45 Page No. 100
Cat. No. 79235x45 Page No. 100
Cat. No. 79130x45 Page No. 79
Cat. No. 79110x45 Page No. 96
Cat. No. 78630 Page No. 83
105
35 3226.55 X 10 SLOT
(3 9/32") (2 3/8")6083
38 DIA
5574
PANELTHICKNESSMIN.: 1.0MAX.: 3.0
60.5 205
58.564.5
PANELTHICKNESSMIN.: 1.0MAX.: 3.0
205
58.5
30.5
64.5
113
1071
83.3(3 9/32")
880
123.5
82 80
144 4438
3844
8082
82
3844
8082
82
(2) 4 DIA (2) 4 X 9 SLOTS
84 59 46
42151126111
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 39
249
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 79530x45 Page No. 98
Cat. No. 79510x45 Page No. 98
Cat. No. 79400 Page No. 70
Cat. No. 79260x45 Page No. 81
Cat. No. 79250x45 Page No. 81
Cat. No. 79550x45 Page No. 98
Cat. No. 79520x45 Page No. 98
Cat. No. 79410 Page No. 70
Cat. No. 79265x45 Page No. 81
Cat. No. 79255x45 Page No. 81
880
148
(2) 4 DIA
(2) 4 X 7 SLOT
84 59 48
41.5845946
80 8
80
4 DIA
115
70 7
60 3540115
71 27
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
60.3(2.375")
9.5
4045
22.5
9.54045
22.5
45 38
22.545
45 3324
73 55
7376 10
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 40
250
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 8119 Page No. 154
Cat. No. 79595x45 Page No. 98
Cat. No. 79590x45 Page No. 98
Cat. No. 79575x45 Page No. 85
Cat. No. 79570x45 Page No. 79
Cat. No. 8200-I Page No. 154
Cat. No. 8115 Page No. 154
Cat. No. 79591x45 Page No. 98
Cat. No. 79578 Page No. 85
(3 9/32")83
46
INSIDE VIEW
9499124
152
4 DIA. THRU7 DIA. C'SINK
53.5
58.6
(3 9/32")83
46
INSIDE VIEW
94124
152
4 DIA. THRU7 DIA. C'SINK
24.5
45
22.545 24.5
45
68 46.5
48.555 4534
3451
72
35.5
3567
(3 9/32")83.3
33.6
66.9
28
41 28
5061
2.5 DIA.2 HOLES 50
1684
77
22
PANEL CUTOUT
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 41
251
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 84110 Page No. 78
Cat. No. 84100x45 Page No. 97
Cat. No. 8384-I Page No. 154
Cat. No. 8300-I Page No. 154
Cat. No. 8201-I Page No. 154
Cat. No. 84210 Page No. 78
Cat. No. 84104 Page No. 78
Cat. No. 84100 Page No. 78
Cat. No. 8301-I Page No. 154
Cat. No. 8284-I Page No. 154
35
2833.5
42.660.2(3 9/32")83.3 56
PANEL CUTOUT
1121.4
45.6
28
49.23649.2
4.5 DIA.
34.9
(3 9/32")83.3
33.6
66.9
28
41 28
35
28
42.660.283.3(3 9/32")
33.5
PANEL CUTOUT
4.5 DIA
36 49.2
28
45.6
21.4
34.9
11
49.2 56 35
PANEL CUTOUT
30
30333335
40
RETAINING CLIP
26
45
45
40
250
65
100 35
733
3345
1235120
77
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 42
252
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 888-1216 Page No. 176
Cat. No. 8801-I Page No. 154
Cat. No. 85110 Page No. 84
Cat. No. 84400 Page No. 78
Cat. No. 84250 Page No. 78
Cat. No. 888-1217 Page No. 170
Cat. No. 888-12108 Page No. 175
Cat. No. 8800-I Page No. 154
Cat. No. 85100x45 Page No. 97
Cat. No. 84250-BLK Page No. 78
203938
48
203938
48
33570
113 68 35
35 DIA
105 60.2
32422.5
83.3(3 9/32") (3 9/32")
83.3
33.6
66.9
28
41 28
28
35
42.660.283.3(3 9/32")
33.5
(4) 5.5 DIA
10390
9890
129114
11088.582
176
PANEL CUTOUT
PANEL CUTOUT
64
60 65
525578
3340
74
(4) 5.5 DIA(4) 5.5 DIA
74
80
3540
5552
6560
64
PANEL CUTOUT
2545
45
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 43
253
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 888-21012 Page No. 176
Cat. No. 888-21000 Page No. 176
Cat. No. 888-13007 Page No. 171
Cat. No. 888-1239 Page No. 173
Cat. No. 888-1228 Page No. 176
Cat. No. 888-21013 Page No. 171
Cat. No. 888-21001 Page No. 170
Cat. No. 888-204 Page No. 173
Cat. No. 888-129 Page No. 174
Cat. No. 888-1229 Page No. 171
(4) 5.5 DIA
102.5
106
6238
92
8581
7767
PANEL CUTOUT
(4) 5.5 DIA
102.5
106
6238
92
8581
7767
PANEL CUTOUT
10085
80774746
99
102.5
92
PANEL CUTOUT
(4) 5.1 DIA
(4) 5.5 DIA
105 DIA61 82
149
122100
91
9586
PANEL CUTOUT
7680
(4) 5.5 DIA20
66 DIA75
92.584
66.5
6075
60
60
PANEL CUTOUT
6.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
60
10 - 24DIAMETER
202145
156.5
86
70 DIA
7 - 15DIAMETER
48DIA
58
123
113160
7 - 15DIAMETER
125
112.5
58
161.5
48.5
64DIA
10 - 24DIAMETER
78
153
143201
10 - 24DIAMETER
66DIA
80
159.5
143205.5
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 44
254
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 888-2769 Page No. 173
Cat. No. 888-261306 Page No. 172
Cat. No. 888-231 Page No. 173
Cat. No. 888-2189 Page No. 174
Cat. No. 888-2126 Page No. 170
Cat. No. 888-304 Page No. 173
Cat. No. 888-27017 Page No. 174
Cat. No. 888-260306 Page No. 172
Cat. No. 888-2199 Page No. 175
Cat. No. 888-2138 Page No. 171
48.5DIA
7 - 15DIAMETER
58
135112.5
36.5
10 - 21DIAMETER
66DIA
132
178
80
143
12 - 35DIAMETER
113.5236
271
24 - 48DIA
270311131
DIA
73DIA
10 - 21DIAMETER
109
88
133155
15 - 33DIA
80DIA
97
185
192252
16.5 - 38DIAMETER
80DIA
173
192240
97
(4) 6.5 DIA
11390
11390
100
215
161113
PANEL CUTOUT
(4) 6 DIA
7020
70115
158
85
85
PANEL CUTOUT
72DIA
10 - 24DIAMETER
101 91
215.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 45
255
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 888-331 Page No. 173
Cat. No. 888-3138 Page No. 171
Cat. No. 888-3124 Page No. 174
Cat. No. 888-31012 Page No. 176
Cat. No. 888-31000 Page No. 176
Cat. No. 888-360306 Page No. 172
Cat. No. 888-3199 Page No. 175
Cat. No. 888-3126 Page No. 170
Cat. No. 888-31013 Page No. 171
Cat. No. 888-31001 Page No. 170
7 - 15DIAMETER
74 64
170.549.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
7 - 15DIAMETER
74 64
170.549.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
66DIA
10 - 24DIAMETER
93.5 84.5
215.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
10 - 24DIAMETER
66DIA
93.584.5
215.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
12 - 35DIAMETER
115105
289
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
7 - 15DIAMETER
49.5DIA
144.5
74 64
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
66DIA
10 - 21DIAMETER
188
93.584.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
121DIA
24 - 48DIAMETER
136
333.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
10 - 21DIAMETER
72DIA
98
171
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
15 - 33DIAMETER
96DIA
112
266
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 46
256
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 888-631306 Page No. 171
Cat. No. 888-6136 Page No. 170
Cat. No. 888-611306 Page No. 170
Cat. No. 888-460306 Page No. 172
Cat. No. 888-361306 Page No. 172
Cat. No. 888-631316 Page No. 176
Cat. No. 888-6236 Page No. 171
Cat. No. 888-611316 Page No. 176
Cat. No. 888-560306 Page No. 172
Cat. No. 888-410306 Page No. 170
16.5 - 38DIAMETER
96DIA
114
255
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
(4) 5.5 DIA
62
8045 30
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
47
47
45
62
PANEL CUTOUT
(4) 6.5 DIA
8590118
5174137100
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED PANEL CUTOUT
77(4) 6.5 DIA
117108
71 64147100
8590
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID REMOVED
PANEL CUTOUT
77
(4) 5.5 DIA
30
30
5565
52
97
72
PANEL CUTOUT
(4) 5.5 DIA
30
30
5565
52
97
72
PANEL CUTOUT
(4) 5.5 DIA
50 47
4465.5
62
4762
PANEL CUTOUT
(4) 5.5 DIA80
60
60
7075
5375
PANEL CUTOUT
(4) 5.5 DIA
45
78
129
103
90
44
75
PANEL CUTOUT
(4) 5.5 DIA
45
78
129
103
90
44
75
PANEL CUTOUT
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 47
257
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 93101 Page No. 155
Cat. No. 92392 Page No. 200
Cat. No. 91751x45 Page No. 99
Cat. No. 89400 Page No. 84
Cat. No. 888-661306 Page No. 172
Cat. No. 93191 Page No. 165
Cat. No. 93091 Page No. 70
Cat. No. 91772x45 Page No. 99
Cat. No. 91730x45 Page No. 99
Cat. No. 888-679 Page No. 175
(4) 6.2 DIA56
90
90114
114
116
185
PANEL CUTOUT
(4) 6.5 DIA
10490
10494
150130
130
PANEL CUTOUT
36
6.572
(2 3/8")60.3115 3 DIA72 2745
293172
5145
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
SEALINGGASKET
303472
4838
81 72 48
3 x 7 SLOTS
3 x 5 SLOTS
72
81 72 52
144 3430
26DIA
590
115
70 135
35.5(2 3/8")
60.3
115
70 135
(2 3/8")60.3115
70 135
40.5
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 48
258
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. 999-3121 Page No. 202
Cat. No. 999-31001-RA Page No. 182
Cat. No. 999-21001-RA Page No. 180
Cat. No. 999-1217 Page No. 184
Cat. No. 97120 Page No. 61
Cat. No. 999-613 Page No. 190
Cat. No. 999-3120 Page No. 202
Cat. No. 999-31001 Page No. 182
Cat. No. 999-21001 Page No. 180
Cat. No. 999-1154210 Page No. 202
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
GASKET
(3 9/32")83.3
4.57038
38114 44
74
122
7.5
PANEL CUTOUT
92
90
40
37.5
104 9312
104
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
4 DIA
6553
PANEL CUTOUT
64 52
60
54080
74
(4) 5.1 DIA
7 -15DIAMETER
125
112.5
58
161.5
48.5DIA.
6.5 - 15 DIAMETER
132.5
51 8245.5
7 - 15DIAMETER
74 64
170.549.5
NOTE: FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
7 - 15 DIAMETER
74
139
77.554
FOR CLARITY THIS VIEW ISSHOWN WITH LIFT LID BROKEN
123
87
5
83
98675
15°
76
115
15°
7586
9
83
5
ATTACHMENT LEAD1.25 DIA. x 180 LONG
56.5
48 DIA 15
Page 49
259
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. L520-P Page No. 165
Cat. No. L520-FI Page No. 165
Cat. No. L515-P Page No. 163
Cat. No. AN25 Page No. 199
Cat. No. A16HE - A40ME Page No. 198
Cat. No. L520-R Page No. 165
Cat. No. L520-FO Page No. 165
Cat. No. L520-C Page No. 165
Cat. No. L515-C Page No. 163
Cat. No. AB6S2 - AB45S2 Page No. 198
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
90 45
18
35.5 74.570
L N
L N
EARTH(GROUNDING)LEAD
18 7270
4590
135142 46
MOUNTING ARRANGEMENT
36
112
13
36
51 63
34.5DIA
38.5DIA 2.3
66.544.5
(3) 4.75 DIA
53.2DIA
73 DIA
31.7
2.5 44.3
54
PANEL CUTOUT
45.7 DIA54 DIA 90
67
34.5DIA
38.5DIA
6644.5
46 DIA54 DIA
6287
(3) 4.75 DIA
53.2DIA
73 DIA 42.4
PANEL CUTOUT
54
31.7
6
58.260.2
30.23.6
40.9
39.283.3
(3 9/32")
Page 50
260
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. L615-P Page No. 164
Cat. No. L615-FI Page No. 164
Cat. No. L530-R Page No. 167
Cat. No. L530-FO Page No. 167
Cat. No. L530-C Page No. 167
Cat. No. L620-C Page No. 166
Cat. No. L615-FO Page No. 164
Cat. No. L615-C Page No. 164
Cat. No. L530-P Page No. 167
Cat. No. L530-FI Page No. 167
46 DIA54 DIA
6298
(4) 5.2 DIA
58.1DIA
79.4 DIA
34.5
2.5 46.8
59
PANEL CUTOUT
5.9
58
PANEL CUTOUT
34.5
47.379.4 DIA
57.4DIA
(4) 5.2 DIA45.7 DIA54 DIA
6792
61.5
5.832.540.9
60.2(3 9/32")
83.339.2
34.5DIA
38.5DIA
6644.5
PANEL CUTOUT
(2) 5.0 DIA
4038
45
5565.0 DIA.
38.5DIA
34.5DIA
44.566.5
2.346 DIA54 DIA 87
62
(2) 5.0 DIA
PANEL CUTOUT
55
45
384065.0 DIA.
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 51
261
DIMENSIONAL DATAAll Dimensions Are In Millimeters(1 mm = 0.039")
Cat. No. L630-R Page No. 168
Cat. No. L630-FO Page No. 168
Cat. No. L630-C Page No. 168
Cat. No. L620-P Page No. 166
Cat. No. L620-FI Page No. 166
Cat. No. QBP5 Page No. 199
Cat. No. L630-P Page No. 168
Cat. No. L630-FI Page No. 168
Cat. No. L620-R Page No. 166
Cat. No. L620-FO Page No. 166
(3) 4.75 DIA
53.2DIA
73 DIA
31.7
2.5 44.3
54
PANEL CUTOUT
(3) 4.75 DIA
53.2DIA
42.473 DIA.
PANEL CUTOUT
54
31.7
6
45.7 DIA54 DIA 90
67
(3 9/32")83.3
39.2
40.93.6
30.2
60.2 58.2
46 DIA54 DIA 98
62 (4) 5.2 DIA79.4 DIA
58.1DIA.
34.5
2.5 46.8
59
PANEL CUTOUT
(4) 5.2 DIA
57.4DIA
79.4 DIA 47.3
34.5
PANEL CUTOUT
58
5.9 46 DIA54 DIA 92
67
61.5
5.832.540.9
60.2(3 9/32")
83.339.2
55
90 8.51.5
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 52
262
INDEX
Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No.
006017 ............ 200007879 ............ 198007886 ............ 198007887 ............ 198007888 ............ 198007889 ............ 198007890 ............ 19812QEL ............. 1991491-008 ........... 611492-008 ........... 611493-008 ........... 611600103 .......... 2051600104 .......... 2051600105 .......... 2051600106 .......... 2051600107 .......... 2051600108 .......... 2051600109 .......... 2051600110 .......... 2051600111 .......... 2051600112 .......... 2051600113 .......... 2051600114 .......... 2051600115 .......... 2051600116 .......... 2051600117 .......... 2051600118 .......... 2051600119 .......... 2051600120 .......... 2051600121 .......... 2051600122 .......... 2051600123 .......... 2051600128 .......... 2051600129 .......... 2051600130 .......... 2051600131 .......... 2051601102 .......... 2051601103 .......... 2051601106 .......... 2051601109 .......... 2051601111 .......... 2051601112 .......... 2051601114 .......... 2051601116 .......... 2051601119 .......... 2051601121 .......... 2051601123 .......... 2051601125 .......... 2051601126 .......... 2051601129 .......... 2051601135 .......... 2051601310 .......... 2061601312 .......... 2061601314 .......... 2061601316 .......... 2061601318 .......... 20620507 ................ 44
20509 ................ 4420511 ................ 4420513 ................ 4420516 ................ 4420521 ................ 4420529 ................ 4420536 ................ 4420542 ................ 4420548 ................ 4420607 ................ 4420609 ................ 4420611 ................ 4420613 ................ 4420616 ................ 4420621 ................ 4420629 ................ 4420636 ................ 4420642 ................ 4420648 ................ 4420707 ................ 4420709 ................ 4420711 ................ 4420713 ................ 4420716 ................ 4420721 ................ 4421707 ................ 4421709 ................ 4421711 ................ 4421713 ................ 4421716 ................ 4421721 ................ 4424QEL ............. 19930100 .............. 11630110 .............. 11630120 .............. 11730130 .............. 11730140 .............. 11830150 .............. 11830160 .............. 11830170 .............. 11830180 .............. 11730181 .............. 11930182 .............. 11930190 .............. 11930195 ................ 6730200 .............. 11630210 ................ 6930220 .............. 11630225 .............. 11930230 .............. 11930240 ................ 6930250 .............. 11730260 .............. 11630295 ................ 7630300 .............. 12030301 .............. 12030320 .............. 120
30330 .............. 12030340 .............. 12130340A ............ 12130350 .............. 12130360 ................ 6730375 .............. 12030375-G .......... 12030395 ................ 7730500 ................ 8230510 ................ 8230600 ................ 3730605 ................ 3730610 ................ 3730620 ................ 3730630 ................ 3730635 ................ 3730640 ................ 3730650 ................ 3730660 ................ 3730670 ................ 3730680 ................ 3730685 ................ 3730690 ................ 3730695 ................ 3731600 ................ 4031605 ................ 4031610 ................ 4031620 ................ 4031630 ................ 4031635 ................ 4031640 ................ 4031650 ................ 4031660 ................ 4031670 ................ 4031680 ................ 4031685 ................ 4031690 ................ 4031695 ................ 4031700 ................ 4031705 ................ 4031710 ................ 4031715 ................ 4032010-EU ........ 12432015-EU ........ 12432020-EU ........ 12432025-EU ........ 12432025-SUS ..... 12432030-EU ........ 12432035-EU ........ 12432035-SUS ..... 12432050-EU ........ 12432050-SUS ..... 12432075-EU ........ 12432075-SUS ..... 12432100-EU ........ 12432100-SUS ..... 12432150-EU ........ 124
32150-SUS ..... 12432200-EU ........ 12432200-SUS ..... 12432250-EU ........ 1243232-I .............. 15532350 .............. 12532360 .............. 12533100-D .......... 12633100-KT ........ 12633125 .............. 12633125-D .......... 12633150-D .......... 12633175-D .......... 12633200-D .......... 12633225-D .......... 12633250-D .......... 12633275-D .......... 12633300-D .......... 12633325-D .......... 12633375-D .......... 12633400-D .......... 12633425-D .......... 12633450-D .......... 12633475-D .......... 12633500-D .......... 12633525-D .......... 12633550-D .......... 12633575-D .......... 12633625-D .......... 12633650 .............. 12633675-KT ........ 12633700-D .......... 12633725-D .......... 12633750-D .......... 12633775 .............. 12633800-D .......... 12633825-D .......... 12634010-EU ........ 12534020-EU ........ 12534030-EU ........ 12534050-EU ........ 12534080-EU ........ 12534100-EU ........ 12534150-EU ........ 12534200-EU ........ 12538041 .............. 19939016 ................ 2439016-LA .......... 2439016-RA .......... 2439017 ................ 2439020 ................ 4239021 ................ 4239030 ................ 4239031 ................ 4239035 ................ 4239041 ................ 4239050 ................ 42
Cat No. ... Pg No.
39070 ................ 4239071 ................ 4239080 ................ 4339090 ................ 4339095 ................ 434300.0701 ....... 1554300.0702 ....... 1554300.0703 ....... 1554550 ................ 1644560 ................ 1644700 ................ 1634710 ................ 1634715-SS .......... 1634716-SS .......... 1634720-SSAN ..... 1634QEL ............... 19952019 .............. 10652106 .............. 10752125 .............. 10752126 .............. 10752145 .............. 10752150 .............. 10752160 .............. 10752170 .............. 10752205 ................ 675242 ................ 1555242-I .............. 1555251-I .............. 1555258 ................ 1555258-I .............. 1555266-HGAN .... 1545266-SSAN ..... 1565266-X .............. 845266-XHG ....... 1545269-X ............ 1565269-XHG ....... 15452720 .............. 10652721 .............. 10652722 .............. 1065276-BK .......... 15652765-10 ......... 10652765-30 ......... 1065278-SS .......... 1565279-SS .......... 15652855 .............. 10652855-A .......... 10652904 .............. 10652906 .............. 10652908 .............. 10652910 .............. 10652912 .............. 10652925 ................ 6152927 .............. 10652929 .............. 10652931 .............. 10652946 ................ 6452948 ................ 64
52955 ................ 7452965 ................ 645296-BK .......... 15653326 ................ 7053328 .............. 10953340 .............. 1095342 ................ 1595342-I .............. 1595351-I .............. 1595358 ................ 1595358-I .............. 1595366-HGAN .... 1545366-SSAN ..... 1605366-X ............ 1605366-XHG ....... 1545369-X ............ 1605369-XHG ....... 1545374-BK .......... 1605378-SS .......... 1605379-SS .......... 16054406 ................ 7254408 .............. 1105466-SSAN ..... 1545466-X ............ 1625466-XHG ....... 1545469-X ............ 1625469-XHG ....... 1545478-SS .......... 1625479-SS .......... 16255506 .............. 10856106 .............. 10956125 ................ 7656205 ................ 7756305 ................ 775642-I .............. 15756504 ................ 825651-I .............. 1575658 ................ 1575658-I .............. 1575666-BK .......... 1585666-SSAN ..... 1545666-X ............ 1585666-XHG ....... 1545669-BK .......... 1585669-X ............ 1585669-XHG ....... 1545678-SS .......... 1585679-SS .......... 15857011 .............. 13457013 .............. 13457015 .............. 13457021 .............. 14357023 .............. 14357025 .............. 14357030 .............. 13257030-A .......... 13257030-NSL ...... 132
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 53
263
INDEX
Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No.
57035 .............. 13257040 .............. 13357040-A .......... 13357040-NSL ...... 13357045 .............. 13357050 .............. 13057050-A .......... 13057050-M .......... 13057050-NS ........ 13057050-NSL ...... 13057055-M .......... 12857055-NS ........ 12857055-NSL ...... 12857060-A .......... 13157060-NS ........ 13157060-NSL ...... 13157065-NS ........ 12957065-NSL ...... 12957070 .............. 12857070-A .......... 12957075 .............. 13157080 .............. 14757081 .............. 14757082 .............. 14757085 .............. 13157090 .............. 14557090-A .......... 14557090-V .......... 14557091 .............. 14557100 .............. 15057103 .............. 15157104 .............. 11157105 .............. 15057106 .............. 11157107 .............. 15057108 .............. 11157110 .............. 14657110-V .......... 14657120 .............. 14057125 .............. 14057130 .............. 14057204 .............. 11157206 .............. 11157208 .............. 11157211 .............. 13857213 .............. 13857215 .............. 13857311 .............. 13457313 .............. 13457315 .............. 13457320 .............. 14057321 .............. 14357323 .............. 14357325 .............. 14357330 .............. 14057345 .............. 14057350 .............. 142
Cat No. ... Pg No.
57355 .............. 14257411 .............. 13857423 .............. 13857425 .............. 13857510 .............. 13957520 .............. 13957530 .............. 13957540 .............. 13957551 .............. 13957552 .............. 13957561 .............. 13957562 .............. 13957571 .............. 13957572 .............. 13957581 .............. 13957582 .............. 13957610 .............. 13557620 .............. 13557630 .............. 14157640 .............. 1415765-BK .......... 16057701 .............. 14457702 .............. 14457703 .............. 14457705 .............. 14457710 .............. 13657715 .............. 13657720 .............. 13757725 .............. 13757730 .............. 14957735 .............. 14957740 .............. 14857745 .............. 14858104 .............. 11058204 .............. 1105851-I .............. 1615858 ................ 1615858-I .............. 1615862-I .............. 1615864-BK .......... 1625866-BK .......... 16260100 .............. 10260112 .............. 10360150 .............. 10260200 .............. 10260250 .............. 10260300 .............. 10260350 .............. 10260400 .............. 10260450 .............. 10260500 .............. 10260550 .............. 10260600 .............. 10360620 .............. 20160650 .............. 10360684 .............. 20160700 .............. 103
60800 .............. 10360900 .............. 10361100 .............. 10461112 .............. 10561150 .............. 10461200 .............. 10461250 .............. 10461300 .............. 10461350 .............. 10461400 .............. 10461450 .............. 10461500 .............. 10461550 .............. 10461600 .............. 10561650 .............. 10561700 .............. 10561800 .............. 10561900 .............. 10562100 .............. 11362150 .............. 11362200 .............. 11362250 .............. 11362300 .............. 11362350 .............. 11362400 .............. 114681348 ............ 200681386 ............ 200681485 ............ 20069204 .............. 20169214 .............. 20169222 .............. 20169275 .............. 20169300 .............. 20170020 ................ 9070100x45 .......... 9670110 ................ 6170110-BLK ........ 6170110-RED ....... 6170114 ................ 6170115 ................ 6170116 ................ 6170117 ................ 6170118 ................ 6170120 ................ 6170120-BLK ........ 6170120-RED ....... 6170125 ................ 6170127 ................ 6470130 ................ 6070130-BLK ........ 6070130A .............. 6070139 ................ 6070140 ................ 6070140-RCD ....... 6070141 ................ 6070142 ................ 6070142A .............. 60
70150 ................ 6070155 ................ 6570155-BLK ........ 6570161 ................ 6070170 ................ 6070180 ................ 6070190 ................ 6070195 ................ 6070198 ................ 6370200x45 .......... 8670225 ................ 6170225-30 ........... 61702708 ............ 20070300 ................ 6270310 ................ 6270325 ................ 6270325A .............. 6270341 ................ 6270361 ................ 6270395 ................ 6270400 ................ 8871100x45 .......... 9671110 ................ 6471120 ................ 6471161 ................ 6371170 ................ 6371200x45 .......... 8771225 ................ 6471225-30 ........... 6472100x45 .......... 9672105x45 .......... 9772110 ................ 6672110-BLK ........ 6672120 ................ 6672130 ................ 6572130-BLK ........ 6572140 ................ 6572140-RCD ....... 6572141 ................ 6572150 ................ 6572160-BLK ........ 6572215 ................ 6672220 ................ 6672300 ................ 6672300-D ............ 6672300-DSM ....... 6672300-S ............ 8672316 ................ 6672320 ................ 6672325 ................ 6672350 ................ 8172355 ................ 8572360 ................ 8172365 ................ 8572403 ................ 6572405 ................ 6572410 ................ 65
72413 ................ 6572440 ................ 8572450 ................ 8572495 ................ 6673100x45 .......... 9773110 ................ 6773130 ................ 6773160 ................ 6773210 ................ 6773310 ................ 6873330 ................ 6873530 ................ 6773550 ................ 6773570 ................ 6774100 ................ 7074100-BLK ........ 7074105x45 .......... 9774110 ................ 7074110-BLK ........ 7074120 ................ 7074130 ................ 6974131 ................ 6974140 ................ 6974140-BLK ........ 6974140-RCD ....... 6974141 ................ 6974180 ................ 6974200 ................ 7074210 ................ 7074220 ................ 7074225 ................ 7874335 ................ 8774452x45 .......... 9974453x45 .......... 9974456x45 .......... 9974457x45 .......... 9974458x45 .......... 9974459x45 .......... 9974500 ................ 7174505x45 .......... 9774510 ................ 7174520 ................ 7174530 ................ 7174540 ................ 7174540-BLK ........ 7174541 ................ 7174560 ................ 6974560-BLK ........ 6974600x45 .......... 8074615 ................ 8074630 ................ 8074700x45 .......... 7974715 ................ 7974730 ................ 7974790 ................ 7975100x45 .......... 9675130 ................ 72
75140 ................ 7275160 ................ 7275500x45 .......... 9675520 ................ 7275530 ................ 7375540 ................ 7376100x45 .......... 9676101x45 .......... 9676110 ................ 7476120 ................ 7476140 ................ 7476143x45 .......... 9676160 ................ 7476510 ................ 7576515 ................ 7576520 ................ 7576540 ................ 7576560 ................ 7577100x45 .......... 9677110 ................ 7677115 ................ 7677130 ................ 7677140 ................ 7677160 ................ 7677190 ................ 7678117 ................ 7778120 ................ 7778130 ................ 7778140 ................ 7778160 ................ 7778230 ................ 7778500 ................ 8278510 ................ 8278510-HG ......... 8278520 ................ 8278530 ................ 8278540 ................ 8278550 ................ 8278560 ................ 8278570 ................ 8278600 ................ 8378605 ................ 8378610 ................ 8378620 ................ 8378630 ................ 8379100x45 .......... 9479110x45 .......... 9479120x45 .......... 9579130x45 .......... 9579230x45 ........ 10079235x45 ........ 10079240x45 ........ 10079245x45 ........ 10079250x45 ........ 10079255x45 ........ 10079260x45 ........ 10079265x45 ........ 100
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 54
264
INDEX
Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No.Cat No. ... Pg No.
79400 ................ 7079410 ................ 7079510x45 .......... 9879520x45 .......... 9879530x45 .......... 9879550x45 .......... 9879570x45 .......... 9879575x45 .......... 9879578 ................ 8579590x45 .......... 9879591x45 .......... 9879595x45 .......... 9880101 ................ 1480101-LA .......... 1480101-RA .......... 1480151 ................ 1580151-LA .......... 1580151-RA .......... 1580201 ................ 1680201-LA .......... 1680201-RA .......... 1680251 ................ 1780251-LA .......... 1780251-RA .......... 1780301 ................ 1880351 ................ 1980401 ................ 2180450 ................ 2680450-LA .......... 2680450-RA .......... 2680452 ................ 2680500 ................ 2980500-LA .......... 2980500-RA .......... 2980551 ................ 3080551-LA .......... 3080551-RA .......... 3080560 ................ 3080601 ................ 3080601-LA .......... 3080601-RA .......... 3080650 ................ 2380660 ................ 3080900 ................ 2681010 ................ 1481040 ................ 14810616 ............ 205810617 ............ 205810618 ............ 205810675 ............ 205810676 ............ 20581070 ................ 14810965 ............ 205810966 ............ 205810967 ............ 205810968 ............ 205810969 ............ 205
810970 ............ 205810971 ............ 205810972 ............ 205810973 ............ 205810974 ............ 205810975 ............ 205810976 ............ 20581131 ................ 1481131-LA .......... 1481131-RA .......... 148115 ................ 1548119 ................ 15481200 ................ 2381202 ................ 2381240 ................ 2381250 ................ 2381260 ................ 2381295 ................ 2381300 ................ 2981300-LA .......... 2981300-RA .......... 2981340 ................ 2981350 ................ 2981360 ................ 2981400 ................ 2681400-LA .......... 2681400-RA .......... 2681413 ................ 2681413-LA .......... 2681413-RA .......... 2681415 ................ 2681415-LA .......... 2681415-RA .......... 2681440 ................ 2681450 ................ 2681460 ................ 2681520 ................ 1581520-RUS ....... 1581550 ................ 1581550-RUS ....... 1581580 ................ 1581580-RUS ....... 1581641 ................ 1581641-LA .......... 1581641-LA-RUS .. 1581641-RA .......... 1581641-RA-RUS . 1581641-RUS ....... 1581900 ................ 1481950 ................ 1481953 ................ 158200-I .............. 1548201-I .............. 15482070 ................ 1882400 ................ 2782405 ................ 2782410 ................ 27
82415 ................ 2782420 ................ 2782425 ................ 2782430 ................ 2782435 ................ 2782440 ................ 2782445 ................ 2782450 ................ 2782460 ................ 2782465 ................ 2782470 ................ 2782475 ................ 2782480 ................ 2782485 ................ 2782490 ................ 2782495 ................ 2782500 ................ 2782505 ................ 2782510 ................ 2882515 ................ 2882520 ................ 2882525 ................ 2882530 ................ 2882535 ................ 2882540 ................ 288284-I .............. 15482900 ................ 2382950 ................ 268300-I .............. 1548301-I .............. 15483040 ................ 1683070 ................ 1683100 ................ 1683221 ................ 1683221-LA .......... 1683221-RA .......... 168384-I .............. 15483900 ................ 1683950 ................ 1683975 ................ 2484010 ................ 1884010-CL .......... 1884040 ................ 1884040-CL .......... 1884100 ................ 7884100X45 .......... 9784104 ................ 7884110 ................ 7884161 ................ 1884161-CL .......... 1884161-LA .......... 1884161-LA-CL ..... 1884161-RA .......... 1884161-RA-CL .... 1884195 ................ 2584210 ................ 7884220 ................ 24
84240 ................ 2484250 ................ 7884250-BLK ........ 7884261 ................ 2484261-LA .......... 2484261-RA .......... 2484295 ................ 2584400 ................ 7884640 ................ 2584650 ................ 2584661 ................ 2584671 ................ 2584900 ................ 1884950 ................ 1885010 ................ 2085040 ................ 2085050 ................ 2085100X45 .......... 9785101 ................ 2085101-LA .......... 2085101-RA .......... 2085110 ................ 8485150 ................ 2085900 ................ 2485950 ................ 2086010 ................ 1986040 ................ 1986070 ................ 1986071 ................ 1986071-LA .......... 1986071-RA .......... 1986900 ................ 1786950 ................ 1987010 ................ 1787040 ................ 1787070 ................ 1787101 ................ 1787101-LA .......... 1787101-RA .......... 1787950 ................ 178800-I .............. 15488010 ................ 218801-I .............. 15488040 ................ 2188070 ................ 2188111 ................ 2188111-LA .......... 2188111-RA .......... 21888-12108 ....... 175888-1216 ......... 176888-1217 ......... 170888-1228 ......... 176888-1229 ......... 171888-1239 ......... 173888-129 ........... 174888-13007 ....... 171888-204 ........... 173
888-21000 ....... 176888-21001 ....... 170888-21012 ....... 176888-21013 ....... 171888-2126 ......... 170888-2138 ......... 171888-2189 ......... 174888-2199 ......... 175888-231 ........... 173888-260306 ..... 172888-261306 ..... 172888-27017 ....... 174888-2769 ......... 173888-304 ........... 173888-31000 ....... 176888-31001 ....... 170888-31012 ....... 176888-31013 ....... 171888-3124 ......... 174888-3126 ......... 170888-3138 ......... 171888-3199 ......... 175888-331 ........... 173888-360306 ..... 172888-361306 ..... 172888-410306 ..... 170888-460306 ..... 172888-560306 ..... 172888-611306 ..... 170888-611316 ..... 176888-6136 ......... 170888-6236 ......... 171888-631306 ..... 171888-631316 ..... 176888-661306 ..... 172888-679 ........... 17588950 ................ 2189010 ................ 2289040 ................ 2289050 ................ 2289071 ................ 2289071-LA .......... 2289071-RA .......... 2289075 ................ 2289400 ................ 8489950 ................ 2290015 ................ 3690015-LA .......... 3690015-RA .......... 3690020 ................ 3690020-LA .......... 3690020-RA .......... 3690025 ................ 3690025-LA .......... 3690025-RA .......... 3690030 ................ 3690030-LA .......... 36
90030-RA .......... 3690035 .............. 14490040 ................ 3790060 ................ 3790075 ................ 3690075-LA .......... 3690075-RA .......... 3690080 ................ 3690080-LA .......... 3690080-RA .......... 3690085 ................ 3690085-LA .......... 3690085-RA .......... 3690090 ................ 3690090-LA .......... 3690090-RA .......... 3690175 ................ 3690175-LA .......... 3690175-RA .......... 3690180 ................ 3690180-LA .......... 3690180-RA .......... 3690185 ................ 3690185-LA .......... 3690185-RA .......... 3690190 ................ 3690190-LA .......... 3690190-RA .......... 3690200 ................ 1490400 ................ 1490511 ................ 3990521 ................ 3990530 ................ 3890540 ................ 3890545 ................ 3890575 ................ 3990611 ................ 3990621 ................ 3990630 ................ 3890635 ................ 3890640 ................ 3890645 ................ 3890665 ................ 3990670 ................ 3990675 ................ 3990711 ................ 3990721 ................ 3990730 ................ 3890735 ................ 3890740 ................ 3890745 ................ 3890750 ................ 3990755 ................ 3990760 ................ 3990800 ................ 3190815 ................ 3190825 ................ 31
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 55
265
INDEX
Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No.Cat No. ... Pg No.
90850 ................ 3190900 ................ 3290950 ................ 3291730x45 .......... 9991751x45 .......... 9991772x45 .......... 9991915 ................ 3191925 ................ 3192392 .............. 20092900 ................ 3293091 ................ 7093101 .............. 15593191 .............. 16593900 ................ 3294920 ................ 3394940 ................ 3394950 ................ 3394960 ................ 3396700 .............. 20396800 .............. 20397120 ................ 6197500 .............. 20397510 .............. 20398216 ................ 3498220 ................ 3498226 ................ 3498230 ................ 3498276 ................ 3498280 ................ 3498285 ................ 3498290 ................ 3498376 ................ 3498380 ................ 3498385 ................ 3498390 ................ 3498515 ................ 3598520 ................ 3598525 ................ 3598545 ................ 3598550 ................ 3598555 ................ 3598575 ................ 3598580 ................ 3598585 ................ 3598615 ................ 3598620 ................ 3598625 ................ 3598645 ................ 3598650 ................ 3598655 ................ 3598675 ................ 3598680 ................ 3598685 ................ 35999-0339 ......... 181999-0439 ......... 181999-102 ........... 188999-103 ........... 188
999-1043 ......... 189999-110 ........... 188999-111 ........... 188999-1111 ......... 188999-1112 ......... 189999-1113 ......... 188999-1114 ......... 188999-1115 ......... 188999-1117 ......... 188999-1118 ......... 188999-112 ........... 188999-1123 ......... 188999-1124 ......... 188999-1126 ......... 188999-1127 ......... 188999-1130 ......... 188999-1132 ......... 189999-1133 ......... 189999-1134 ......... 189999-1136 ......... 189999-1137 ......... 189999-114 ........... 188999-1142 ......... 189999-1148 ......... 189999-1149 ......... 189999-115 ........... 188999-1154 ......... 189999-1154210 ... 202999-1155 ......... 189999-1156 ......... 189999-1157 ......... 189999-1160 ......... 189999-1161 ......... 189999-1164 ......... 189999-1166 ......... 189999-1167 ......... 189999-1170 ......... 189999-1171 ......... 189999-1175 ......... 189999-1200 ......... 186999-12000 ....... 186999-12001 ....... 186999-1201 ......... 184999-1202 ......... 184999-1205 ......... 186999-1206 ......... 186999-1207 ......... 184999-1208 ......... 184999-12100 ....... 186999-12103 ....... 186999-12104 ....... 186999-12107 ....... 186999-12108 ....... 186999-1216 ......... 184999-1217 ......... 184999-1218 ......... 184999-1220 ......... 184
999-1221 ......... 184999-1226 ......... 184999-1227 ......... 184999-1228 ......... 184999-1229 ......... 184999-1230 ......... 184999-1232 ......... 184999-1233 ......... 184999-1238 ......... 184999-1239 ......... 184999-1265 ......... 186999-1266 ......... 186999-1267 ......... 186999-1275 ......... 186999-1276 ......... 186999-1287 ......... 186999-1288 ......... 186999-129 ........... 186999-1299 ......... 186999-13000 ....... 185999-13001 ....... 185999-13002 ....... 185999-13004 ....... 185999-13005 ....... 185999-13006 ....... 185999-13007 ....... 185999-13008 ....... 185999-13010 ....... 185999-13011 ....... 185999-13023 ....... 187999-13024 ....... 187999-13025 ....... 187999-13028 ....... 187999-1305 ......... 185999-13100 ....... 187999-13103 ....... 187999-13104 ....... 187999-1323 ......... 185999-1324 ......... 185999-1332 ......... 185999-1333 ......... 185999-136 ........... 185999-1369 ......... 187999-1370 ......... 187999-1371 ......... 187999-1372 ......... 187999-1373 ......... 187999-1376 ......... 187999-1381 ......... 187999-1382 ......... 187999-1395 ......... 187999-1396 ......... 187999-1399 ......... 187999-1400 ......... 187999-1402 ......... 187999-1404 ......... 187999-1406 ......... 187
999-1408 ......... 187999-14324 ....... 190999-14334 ....... 190999-15334 ....... 190999-203 ........... 180999-203-RA ..... 180999-204 ........... 180999-21000 ....... 180999-21001 ....... 180999-21001-RA . 180999-21002 ....... 180999-21004 ....... 180999-21005 ....... 180999-21010 ....... 180999-21012 ....... 180999-21013 ....... 180999-21014 ....... 180999-21016 ....... 180999-21017 ....... 180999-21022 ....... 180999-2156 ......... 181999-2157 ......... 181999-2158 ......... 181999-2160 ......... 181999-2161 ......... 181999-2166 ......... 181999-2167 ......... 181999-2168 ......... 181999-2169 ......... 181999-2170 ......... 181999-2172 ......... 181999-2173 ......... 181999-2178 ......... 181999-2179 ......... 181999-2180 ......... 181999-2181 ......... 181999-2184 ......... 181999-2185 ......... 181999-2188 ......... 181999-2189 ......... 181999-2190 ......... 181999-2191 ......... 181999-2194 ......... 181999-2195 ......... 181999-2198 ......... 181999-2199 ......... 181999-2339 ......... 183999-2414 ......... 194999-2415 ......... 194999-2416 ......... 194999-2417 ......... 194999-2418 ......... 194999-2420 ......... 194999-2421 ......... 194999-2426 ......... 194999-2427 ......... 194999-2439 ......... 183
999-244 ........... 194999-245 ........... 194999-246 ........... 194999-248 ........... 194999-249 ........... 194999-27004 ....... 193999-27005 ....... 193999-27006 ....... 193999-27007 ....... 193999-27010 ....... 193999-27011 ....... 193999-27016 ....... 193999-27017 ....... 193999-2705 ......... 192999-2706 ......... 192999-2709 ......... 192999-2735 ......... 193999-2736 ......... 193999-2739 ......... 193999-2740 ......... 193999-2744 ......... 193999-2751 ......... 192999-2756 ......... 192999-2757 ......... 192999-2758 ......... 192999-2759 ......... 192999-2762 ......... 192999-2763 ......... 192999-2768 ......... 192999-2769 ......... 192999-2792 ......... 193999-2793 ......... 193999-303 ........... 182999-304 ........... 182999-31000 ....... 182999-31001 ....... 182999-31001-RA . 182999-31002 ....... 182999-31004 ....... 182999-31005 ....... 182999-31010 ....... 182999-31012 ....... 182999-31013 ....... 182999-31014 ....... 182999-31016 ....... 182999-31017 ....... 182999-31022 ....... 182999-3120 ......... 202999-3121 ......... 202999-3124 ......... 183999-31429 ....... 187999-3156 ......... 183999-3157 ......... 183999-3158 ......... 183999-3160 ......... 183999-3161 ......... 183999-3166 ......... 183
999-3167 ......... 183999-3168 ......... 183999-3169 ......... 183999-3170 ......... 183999-3172 ......... 183999-3173 ......... 183999-3178 ......... 183999-3179 ......... 183999-3180 ......... 183999-3181 ......... 183999-3184 ......... 183999-3185 ......... 183999-3188 ......... 183999-3190 ......... 183999-3191 ......... 183999-3194 ......... 183999-3195 ......... 183999-3198 ......... 183999-3199 ......... 183999-3227 ......... 189999-32429 ....... 187999-3339 ......... 187999-3439 ......... 187999-3459 ......... 187999-41426 ....... 186999-41429 ....... 186999-42324 ....... 186999-42326 ....... 186999-42329 ....... 186999-42426 ....... 186999-42429 ....... 186999-4339 ......... 186999-4439 ......... 186999-5334 ......... 195999-5336 ......... 195999-5337 ......... 195999-5338 ......... 195999-5339 ......... 195999-5434 ......... 195999-5436 ......... 195999-5440 ......... 195999-5441 ......... 195999-5442 ......... 195999-5446 ......... 195999-5449 ......... 195999-613 ........... 190999-6134 ......... 190999-6136 ......... 190999-6139 ......... 190999-614 ........... 190999-6146 ......... 190999-6149 ......... 190999-615 ........... 190999-6159 ......... 190999-623 ........... 190999-6234 ......... 190999-6236 ......... 190
I C I
TM International Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 56
266
INDEX
Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No. Cat No. ... Pg No.Cat No. ... Pg No.
999-6246 .......... 190999-6249 .......... 190999-625 ............ 190999-6256 .......... 190999-6259 .......... 190999-6334 .......... 191999-6336 .......... 191999-6339 .......... 191999-6346 .......... 191999-6349 .......... 191999-635 ............ 190999-6356 .......... 191999-6359 .......... 191999-6434 .......... 191999-6436 .......... 191999-6439 .......... 191999-6446 .......... 191999-6449 .......... 191999-645 ............ 191999-6456 .......... 191999-6459 .......... 191999-71324 ........ 193999-71326 ........ 193999-71329 ........ 193999-7139 .......... 192999-71426 ........ 193999-71429 ........ 193999-7156 .......... 190999-72324 ........ 193999-72326 ........ 193999-72329 ........ 193999-7239 .......... 192999-72426 ........ 193999-72429 ........ 193999-7339 .......... 193999-7439 .......... 193999-7459 .......... 193A16HE .............. 198A16UE .............. 198A25HE .............. 198A25ME ............. 198A32HE .............. 198A32ME ............. 198A40HE .............. 198A40ME ............. 198AB10S2 ............ 198AB16S2 ............ 198AB20S2 ............ 198AB32S2 ............ 198AB40S2 ............ 198AB45S2 ............ 198AB6S2 .............. 198AH30 ................ 198AH100 .............. 198AN25 ................ 199AS14 ................ 199AS14F .............. 199AS19 ................ 199AS19F .............. 199L515-C ............. 163L515-P ............. 163
L520-C ............. 165L520-FI ............. 165L520-FO ........... 165L520-P ............. 165L520-R ............. 165L530-C ............. 167L530-FI ............. 167L530-FO ........... 167L530-P ............. 167L530-R ............. 167L615-C ............. 164L615-FI ............. 164L615-FO ........... 164L615-P ............. 164L620-C ............. 166L620-FI ............. 166L620-FO ........... 166L620-P ............. 166L620-R ............. 166L630-C ............. 168L630-FI ............. 168L630-FO ........... 168L630-P ............. 168L630-R ............. 168QBP5 ............... 199
I C I
TMInternational Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985
© 2004 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com
Page 57
TERMS AND CONDITIONS OF SALES
© 2002-2012 International Configurations, Inc. Entire contents of this catalog copyrighted. www.InternationalConfig.com [email protected] Configurations, Inc. • P.O. Box 3374 • Enfield, Connecticut 06083 • TEL (860) 749-6380 • FAX (860) 749-2985 267
ShipmentsShipments, deliveries, payment terms and performance of work shall at all times be subject to the approval of the seller. The seller may, at any time, decline to make any shipment or delivery or perform any work except upon receipt of payment or security or upon terms and conditions satisfactory to the seller.
1.
PricesAll prices quoted by the seller are net. List prices are subject to change without notice. Prices stated on this form are contingent upon acceptance of delivery by the buyer of all goods subject to this order within six (6) months and can be increased or decreased at the seller’s option upon ninety (90) days’ written notice by the seller. Subject to section 1, the seller’s payment terms are net thirty (30) days, from the date of invoice. Pursuant to Connecticut law, a charge of one and one-half percent (1-1/2%) per month is made on the past due balance of any account in order to reimburse the seller for estimated administrative and other costs associated with delinquent accounts. The buyer agrees that such a charge is reasonable in the light of the anticipated or actual harm caused by reason of the Buyer’s delinquency, the difficulties of proof of loss, and the inconvenience or nonfeasability of the seller otherwise obtaining a remedy. The buyer further agrees that such a charge is not an agreement, express or implied, to give further time for payment.
2.
TaxesThe Buyer shall promptly pay any taxes which the seller may be required to pay or collect under any existing or future law for the account of the Buyer. Connecticut sales tax shall be added to shipments made within Connecticut unless a valid resale certificate has been filed with the Seller.
3.
CostsAll transportation costs, insurance charges, payment convenience fees, currency exchange fees, export documentation cost, handling cost, priority processing fees and miscellaneous cost shall be invoiced to the buyer. F.O.B. point is Enfield, Connecticut. The Seller reserves the right to ship by carrier of its discretion unless otherwise specified by the buyer.
4.
WarrantyIf the goods furnished to the Buyer shall fail, due to defective material or workmanship, within one (1) year from the date of shipment, the Seller shall replace such non-conforming goods or repair such non-conforming goods without charge to the buyer. This warranty does not apply if the goods have been damaged by accident, abuse, misuse, modification or misapplication; by damage during shipment; or by improper service. The foregoing warranty is exclusive and NO OTHER WARRANTY, WHETHER EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A GENERAL OR PARTICULAR PURPOSE OR DESIGN SHALL EXIST IN CONNECTION WITH ANY OF THE GOODS SUPPLIED HEREUNDER. AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY EXCLUDED. This warranty allocates the risk of the failure of goods between the Seller and the Buyer as authorized by applicable law. No employee, agent, dealer, or other person is authorized to give any warranties on behalf of the Seller or to assume for the Seller any other liability in connection with any of its goods except in writing and signed by an officer of the Seller. Although the Seller makes every effort to ensure the accuracy of specifications at the time of publication, specifications for products described in this publication are subject to change without notice. The Seller makes no representation that the goods comply with any present or future international, federal, state or local regulation or ordinance. Compliance is the Buyer’s responsibility, The use of the Seller’s goods should be in accordance with the provision of the national Electric Code, U.L., and/or other industry, military or international standards that are pertinent to the particular end use. Installation or use not in accordance with these codes and standards could be hazardous.
6.
ClaimsAll goods shall be inspected by the Buyer when received, and every claim on account of defective material, workmanship, or shortages, or for any other cause, shall be deemed waived by the Buyer, unless made in writing and received by the Seller within thirty (30) days from the date of receipt of such goods to which such claim relates. Upon receipt of such claim, the Seller shall be given a reasonable opportunity to inspect such goods. No goods shall be returned to the Seller without the Seller’s written authorization. Returned goods shall be subject to a restocking charge, F.O.B. destination and prepaid. The Seller reserves the right to overship or undership by 5% on NON-STOCK items. No claim of any kind, whether as to goods delivered or for non-delivery of goods, shall be greater in amount than the purchase price of the goods in respect of which such damages are claimed.
7.
Change OrdersSeller shall accept at its sole discretion, any order changes and cancellation (up to 30 days prior to shipment) of standard items for which a ready market exists and/or for items, which the order has not yet been issued with the overseas supplier. Cancelled orders shall be subject to a cancellation charge.
8.
CancellationsScheduled orders are non-cancellable. However, Seller will consider a request for cancellation if the product is not already in Seller’s stock, en route from manufacturer’s factory, or in production at time of Buyer’s request.
9.
DamagesIT IS EXPRESSLY AGREED THAT SECTION 6 STATES THE BUYER’S SOLE AND EXCLUSIVE REMEDY for any breach of warranty and for claim for personal injury, property damage or commercial loss, whether sounding in contract, tort, strict liability or negligence, based on any defect on any goods of the Seller. Without limiting the generality of the preceding sentence, it is expressly agreed that the SELLER SHALL NOT BE RESPONSIBLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER, including any labor or other costs, incurred by the buyer as a result of such defect or incident to the repair or replacement, or inability to use, any good.
10.
Force MajeureThe Seller shall be excused for any delay in performance due to acts of God, war, riot, embargoes, acts of civil or military authorities, fires, floods, accidents, quarantine restrictions, strikes, differences with workmen, delays in transportation, shortage of fuel, labor or materials, or any circumstantial cause beyond the control of the Seller in the reasonable conduct of business.
11.
Modification of AgreementThis agreement cannot be modified in any way, except in writing, signed by the parties herein.
12.
WaiverWaiver by the Seller of a breach of any of the terms and conditions set forth above shall not be constructed as a waiver of any other or subsequent breach.
13.
Governing LawConnecticut law governs this transaction.
14.
Collection CostsIn the event the Buyer defaults in the terms of payment, the Seller may recover from the buyer all costs of collection, including without limitation reasonable attorneys’ fees, whether or not such collection includes the commencement of a lawsuit.
15.
Terms and ConditionsThe Seller accepts orders only upon the foregoing terms and conditions, which shall prevail notwithstanding any variance with the terms and conditions of any order submitted by the Buyer. Acceptance of delivery of goods shall be deemed agreement herewith by the Buyer.
16.
Technical change rights reserved17.
Rush OrdersOrders placed for same day shipment are subject to a service charge.
5.