srl girol ROTATING UNIONS - GIUNTI ROTANTI
Feb 16, 2019
girolsrl
srl
GIUNTI ROTANTI - ROTATING UNIONS
girolsrlGIUNTI ROTANTI - ROTATING UNIONS
girolROTATING UNIONS - GIUNTI ROTANTI
ABOUT US
Girol srl Rotating Unions03
via Piemonte 14, Carate Brianza (Mb), 20841 ITALY
+39 0362-905204 Fax +39 0362-992972 E-mail: [email protected]
CONTACT US // CONTATTACI
Girol srl nasce il 1° Gennaio 2006 da una scissione dalla casa madre OMPI
srl, produttrice di freni frizioni e giunti rotanti dal 1976. Detta scissione è stata dettata dalla necessità di dedicare alla progettazione e produzione di giunti rotanti una attenzione più specifica e una migliore organizzazione del lavoro. Infatti la richiesta da parte del mercato di prodotti sempre più diversificati e personalizzati ha imposto la creazione di un’azienda autonoma, avente una identità specifica settoriale e quindi scorporata dalla tradizionale produzione OMPI di freni e frizioni. È nata così la GIROL Srl un’azienda nuova ma al tempo stesso già adulta perchè forte della trentennale esperienza di OMPI srl nel settore dei giunti rotanti. L’ ufficio tecnico, organizzato ed attrezzato con i più moderni software per la progettazione e le verifiche di resistenza in 3D, è costantemente impegnato nella ricerca e sviluppo di nuovi prodotti volti ad un mercato che diventa sempre più esigente e diversificato.Il reparto prove è gestito in stretto contatto con l’ufficio tecnico per testare i nuovi articoli sperimentali mentre il reparto collaudi consente il mantenimento dei requisiti di qualità sulla produzione corrente. Un fornitissimo magazzino ci permette di soddisfare anche le richieste più urgenti per tutta la gamma di produzione standard, consentendoci di essere considerati dai nostri clienti un autentico supermercato del giunto rotante.
Girol srl was born on January 01 2006 from the need of its mother company
OMPI srl to dedicate a closer attention to the rotating unions’ developement and production together with a better tailored organization of the work. In fact, the request from the markets of always more specific and customized requirements, forced the creation of an independent company having a specific sectorial identity and therefore separated from the traditional OMPI production of clutches and brakes. So it has been created the GIROL Srl,a new firm but adult already thanks to thirty years of OMPI’s experience about rotating unions. The tech dept, organized and equipped with the most updated softwares for the design and stress calculations in 3D, is constantly involved in the research and developing of new products aimed at the international market that is getting more and more pretending. The area for the testing of the new designs and materials is managed under the direct supervision of the engineering dept., while the quality control area lets the company permanently keep the needed requested high standard quality of the current production. A fully provided warehouse allows us to satisfy the most urgent customer’s requests on all our standard production letting us to be considerated as a kind of rotatingunions supermarket.
CHI SIAMO
Girol srl Rotating Unions
via Piemonte 14, Carate Brianza (Mb), 20841 ITALY
+39 0362-905204 Fax +39 0362-992972 E-mail: [email protected]
CONTACT US // CONTATTACI
CONTENTS // SOMMARIO
Girol srl Rotating Unions05
06 Series/Serie
10 Series/Serie
12 Series/Serie
14 Series/Serie
18 Series/Serie
20 Series/Serie
22 Series/Serie
24 Series/Serie
26 Series/Serie
28 Series/Serie
32 Series/Serie
36 Series/Serie
38 Series/Serie
39 Series/Serie
40 Retailers // Rivenditori
42 Annotations // Note
U
R
D
N
HD
IH
SP
AB
On/Off
K
M
Z
RR
E
Girol srl Rotating Unions
.
MAX FLUID PRESS // PRESSIONE MAX
AIR // aria
AIR // ARIA
12 bars
80 °C
110 °C
FLUIDS // fluidi
WATER ∙ OIL ∙ FLUIDSacqua ∙ olii ∙ fluidi
70 bars
MAX TEMPERATURE // TEMPERATURA MAX
UMD025-GB3GS UMD025-GB2GS 1/4”BSP6 36
/60 74
1714,5 0,4 Kg
5.0000.236 1.417 2.362 2.914 0,571 0,88 Lb
UMD037-GB3GS UMD037-GB2GS 3/8” BSP10 44
1/4”BSP68 90
2216 0,6 Kg
3.5000.394 1.732 2.677 3.543 0.630 1.32 Lb
UMD050-GB3GS UMD050-GB2GS 1/2”BSP13 52
3/8” BSP76 101
2718 0,8 Kg
3.0000.512 2.047 2.992 3.976 0.709 1.76 Lb
UMD075-GB3GS UMD075-GB2GS 3/4”BSP18 57
1/2”BSP80 111
3220 1,1 Kg
2.5000.709 2,244 3,150 4,370 0,787 2,43 Lb
UMD100-GB3GS UMD100-GB2GS 1” BSP24 73
3/4” BSP97 134
4123 1,9 Kg
2.0000.945 2,874 3,819 5,276 0,906 4,19 Lb
UMD125-GB3GS UMD125-GB2GS 1”¼ BSP32 87
1” BSP113 158
5029 3,2 Kg
1.5001.260 3,425 4,449 6,220 1,142 7,05 Lb
UMD150-GB3GS UMD150-GB2GS 1”½ BSP38 94
1”¼ BSP117 166
5531 3,9 Kg
1.0001,496 3,701 4,606 6,535 1,220 8,60 Lb
UMD200-GB3GS UMD200-GB2GS 2” BSP48 108
1”½ BSP131 189
6535 5,3 Kg
8001,890 4,252 5,157 7,441 1,378 11,6 Lb
UMD250-GC3GS UMD250-GC2GS 2”½ BSP62 140
2” BSP 200 280
7542 13 Kg
5002,441 5,512 7,874 11,02 1,654 28,6 Lb
GRAPHITE-INOXGrafite-Inox
SILICON-SILICONSilicio-Silicio A B C D E F L M WEIGHT
pesoRPM
G/min
▲▲
▲▲ ▲
▲▲
▲
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
UNIVERSAL ROTATING UNIONGiunti rotanti universali
UNIVERSAL ROTATING UNION Giunti rotanti universali
La fornitura standard comprende il rotore con
filettatura cilindrica GAS destra o sinistra. Su richiesta forniamo rotori filettati secondo altri standard.La tenuta standard (grafite su acciaio Inox) si utilizza per aria e per acqua con filtraggio pari pari ad almeno 20 micron. Per liquidi con pressioni superioria 60 bar si consiglia di consultare un nostro tecnico.
The standard supply provides the rotating
nipple threaded cilindrical GAS right or left. On the request we supply other standard. Standard seal (graphite vs. stainless steel) in used for air and for water or hydraulic oil, seal of silicon carbide vs. silicon carbide in suggested. For liquid at pressure more than 60 bar (870 PSI) please contact our technician
Girol srl Rotating UnionsGirol srl Rotating Unions 0706
U
From 500 to 5.000 rpmda 500 a 5.000 g/min
MAX SPEED // ROTAZIONE MAX
▲▲
UM
Avvertenze generali di montaggioGeneral assembling warnings1) I collegamenti al corpo del giunto devono essere sempre effettuati con tubi flessibili2) le tubazioni di adduzione al giunto e ai cilindri devono essere
assolutamente esenti da trucioli, scorie di saldature o altro3) Evitare l’uso con più di una condizione massima di funzionamento.
1) Pipe connection have always to be made with flexible hoses2) The plant pipings and the rotating cylindres must be
absolutely cleaned from chips welding slags, dirtness and so on
3) Avoid use with more than one max operatin data
UFD077-GB3GS UFD077-GB2GS 1/8”BSP 1/4”BSP 3/8”BSP15 110 147
0,591 4,331 5,787
UFD102-GB3GS UFD102-GB2GS 1/4”BSP 3/8”BSP 1/2”BSP15 130 174
0,591 5,118 6,850
UFD127-GB3GS UFD127-GB2GS 3/8” BSP 1/2”BSP 3/4”BSP25 155 203
0,984 6,102 7,992
UFD152-GB3GS UFD152-GB2GS 1/2”BSP 3/4”BSP 1”BSP25 165 222
0,984 6,495 8,740
UFD202-GB3GS UFD202-GB2GS 3/4”BSP 1”BSP 1”1/4BSP25 185 248
0,984 7,283 9,764
UFD252-GC3GS UFD252-GC2GS 1” BSP 1”1/4BSP 1”1/2BSP30 280 348
1,181 11,02 13,70
UFD039-GB3GS UFD039-GB2GS / M8X1 1/8”BSP15 105 122
0,591 4,133 4,803
UFD052-GB3GS UFD052-GB2GS / 1/4”BSP 1/4”BSP15 100 134
0,591 3,937 5,276
GRAPHITE-INOXGrafite-Inox
SILICON-SILICONSilicio-Silicio
G1(Optional) G N R U Z
DUAL FLOW // FIXED SYPHONDue vie // Tubo sifone fisso
URD039-GB3GS URD039-GB2GS6 40 95
0,263 1,575 3,740
URD052-GB3GS URD052-GB2GS9 40 105
0,354 1,575 4,133
URD077-GB3GS URD077-GB2GS12 50 115
0,472 1,969 4,527
URD102-GB3GS URD102-GB2GS16 50 165
0,630 1,969 5,496
URD127-GB3GS URD127-GB2GS20 60 190
0,787 2,362 7,480
URD152-GB3GS URD152-GB2GS25 60 200
0,984 2,362 7,874
URD202-GB3GS URD202-GB2GS32 60 222
1,260 2,362 8,898
URD252-GC3GS URD252-GC2GS40 60 320
1,575 2,362 12,98
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
Turning pipeRotating syphon are fixed internally with the roll for rotating with it.The UR elbow help to support the pipe and restrict crosstalk passages. The pipe must be straight and concentric to the center line to avoid excessive loadingof the union.Rotational speeds above 1.000 rpm should be avoided.
Tubo tornitoI tubi rotanti sonofissati internamente al rullo per ruotare insieme con esso. La curva UR fa da supporto al sifone,il quale deve essere concentrico all’asse del giunto per evitare carichi eccessivisu di esso. Una rotazione superiorea 1.000 g/minè da evitare
For UT series it’s the same for UR series, but in the elbow there is one seal for double indipendent passage
Per la serie UT vale lo stesso discorso della serie UR, ma con la differenza che nella curva è presente una
guarnizione che consente di avere due vie indipendenti.
GRAPHITE-INOXGrafite-Inox
SILICON-SILICONSilicio-Silicio H S V
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
ROTATING SYPHONTubo sifone rotante
ROTATING SYPHONTubo sifone rotante con tenuta
Girol srl Rotating UnionsGirol srl Rotating Unions 0908
UR
UT
UF
Tubo filettatoThreaded pipeLa curva dei giunti serie UF fa da supporto al tubo sifone,il quale si avvita su di essa.Il filetto deve essere concentrico all’asse del giuntoper evitare disassamenti rispetto all’asse del rullo
The elbow of UF series halp to support the syphonand it will be screwed in the elbow.The thread must be concentric of rotating union’s axisfor avoid misalingment
Girol srl Rotating Unions
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
ROTATING UNION FOR AIR AND VACUUM // HIGH SPEEDNESSGiunti rotanti per aria e vuoto // Alta velocità
La fornitura standard comprende il rotore con
filettatura cilindrica GAS destra o sinistra. Su richiesta forniamo rotori filettati secondo altri standard..
The standard supply provides the rotating
nipple threaded cilindrical GAS right or left. On the request we supply other standard..
Avvertenze generali di montaggioGeneral assembling warnings1) I collegamenti al corpo del giunto devono essere sempre
effettuati con tubi flessibili2) le tubazioni di adduzione al giunto e ai cilindri devono essere
assolutamente esenti da trucioli, scorie di saldature o altro3) Evitare l’uso con più di una condizione massima di funzionamento.
1) Pipe connection have always to be made with flexible hoses2) The plant pipings and the rotating cylindres must be
absolutely cleaned from chips welding slags, dirtness and so on3) Avoid use with more than one max operatin data
MAX FLUID PRESS // PRESSIONE MAX
AIR // aria 10,5 barsVACUUM // vuoto 700 mm/hg
▲▲
▲▲
AIR // ARIA 80 °C
MAX TEMPERATURE // TEMPERATURA MAX
▲ ▲
From 500 to 3.000 rpmda 500 a 3.000 g/min
MAX SPEED // ROTAZIONE MAX
▲▲
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
RMD012-GB4GR 1/8”BSP4,5 35
1411 42 63 15 0,2 Kg
3.0000,177 1.378 0,433 1,654 2,480 0,591 0,5 lb
RMD025-GB4GR ¼”BSP7 40
1714,5 50 76 17,5 0,3 kg
2.5000,276 1.575 0,571 1,969 2,992 0,689 0,66 lb
RMD037-GB4GR 3/8” BSP10 48
2216 60 90 20,5 0,43 kg
2.0000,394 1,890 0,630 2,362 3,543 0,807 0,95 lb
RMD050-GB4GR 1/2”BSP12,5 50
2718 80 111 30 0,75 kg
1.5000,492 1,969 0,709 3,150 4,370 1,181 1,65 lb
RMD075-GB4GR 3/4”BSP17 56
3220 86 122 36 0,96 kg
1.0000,669 2,205 0,787 3,386 4,803 1,417 2,12 lb
RMD100-GB4GR 1” BSP22 65
4123,5 98 138 40 1,4 kg
5000,866 2,559 0,925 3,858 5,433 1,575 3,09 lb
RMD125-GB4GR 1”1/4 BSP32 90
5029 108 169 53 1,9 kg
5001,253 3,543 1,141 4,251 6,471 2,086 4,19 lb
RMD150-GB4GR 1”1/2 BSP38 95
5531 117 183 58 2,2 kg
5001,496 3,740 1,220 4,606 7,204 2,283 4,85 lb
CODECodice A B C D E F G H WEIGHT
pesoRPM
g/min
Girol srl Rotating UnionsGirol srl Rotating Unions 1110
R
Girol srl Rotating Unions
1 2
1
2
1/4”BSP6 12,5 22 36 65 60 6 43 62 30 148 14
40.236 0.492 0.866 1,417 2,559 2,362 0.236 1,693 2,441 1,181 5,827 0,551
D-0037-GY3LS D-0037-GY2LS 3/8”BSP10 17 30 45 75 75 8 48 78 38 178 14
40.394 0,669 1,181 1,772 2,953 2,953 0.315 1,890 3,071 1,496 7,008 0,551
D-0050-GY3LS D-0050-GY2LS 1/2”BSP13 22 39 52 85 88 8 48 88 40 194 14
40.512 0.866 1,535 2,047 3,346 3,465 0.315 1,890 3,465 1,575 7,638 0,551
D-0075-GY3LS D-0075-GY2LS 3/4”BSP18 26 44 58 100 94 10 57 93 48 224 18
40.709 1,024 1,732 2,283 3,937 3,701 0.394 2,244 3,661 1,890 8,819 0,709
D-0100-GY3LS D-0100-GY2LS 1” BSP24 33 53 65 100 110 10 57 100 58 246 18
40.945 1,299 2,087 2,559 3,937 4,331 0.394 2,244 3,937 2,283 9,685 0,709
D-D025-GY3GS D-D025-GY2GS 1/4”BSP6 11 23 4 14
36 3/4”BSP 2.8000.236 0,433 0,906 0,157 0,551
D-D037-GY3GS D-D037-GY2GS 3/8”BSP10 13 30 4 18
55 1”BSP 2.1000.394 0,512 1,181 0,157 0,709
D-D050-GY3GS D-D050-GY2GS 1/2”BSP13 18 40 5 22
65 1”1/4 BSP 1.7000.512 0,709 1,575 0,197 0,866
D-D075-GY3GS D-D075-GY2GS 3/4”BSP18 21 51 6 25
70 1”1/2 BSP 1.5000.709 0,827 2,008 0,236 0,984
D-D100-GY3GS D-D100-GY2GS 1” BSP24 25 56 8 28
90 2”BSP 1.2000.945 0,984 2,205 0,315 1,102
GRAPHITE-INOXGrafite-Inox Silicio-Silicio A B C D E F G H L M N P R S
D-0025-GY3LS D-0025-GY2LS
GRAPHITE-INOXGrafite-Inox Silicio-Silicio A B T U V Z W X RPM
G/min
SILICON-SILICON
SILICON-SILICON
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
.
THREAD VERSIONVersione attacco filettato
AIR // aria 80º C / 176º F110º C / 230º FLIQUID // liquidi
MAX TEMPERATURE // TEMPERATURA MAX
▲▲ ▲
▲
Girol srl Rotating UnionsGirol srl Rotating Unions 1312
DUAL FLOW INDIPENDENT ROTATING UNIONGiunti rotanti doppio passaggio indipendente
La fornitura standard comprende il rotore
con filettatura cilindrica GAS . Su richiesta forniamo rotori filettati secondo altri standard. La tenuta standard (grafite su acciaio Inox)si utilizza per aria e per acqua con filtraggio pariad almeno 20 micron.Per liquidi con pressioni superiori a 60 barsi consiglia di consultareun nostro tecnico.
The standard supply provides the rotating
nipple threaded cilindrical GAS. On the request we supply other standard. Standard seal (graphite vs. stainless steel) in used for air and for water or hydraulic oil, seal of silicon carbide vs. silicon carbide in suggested. For liquid at pressure more than 60 bar (870 PSI) please contact our technician
D
MAX FLUID PRESS // PRESSIONE MAXAIR // aria 1º-12 bars, 2º-6 barsLIQUID // liquido 1º-70 bars, 2º-12 bars
▲▲
▲
▲▲
▲
AIR ∙ WATER ∙ OIL ∙ FLUIDSaria ∙ acqua ∙ olii ∙ fluidi
From 500 to 5.000 rpmda 500 a 5.000 g/min
MAX SPEED // ROTAZIONE MAX
▲▲
FLANGED VERSION
THREAD VERSION
FLANGED VERSIONVersione attacco a flangia
.
MONOFLOW VERSIONVersione monovia
NBD300-GF3KXNB0300-GF3LX
NBD300-GF7KFNB0300-GF7LF
308 165 194/ /
72/ / / 73
103 3” BSP 90 2”½BSP33 83
20160 87,3 8 18 22 2,87 / /
NB0400-LF1LF 338 189 213 180 112,7 95 8 18 2585
160 DN100 115 / / / 253,34
NB0500-LF1LF 417 222 257 240 139,2 122 8 22 3296
200 DN125 140 / / / 303,78
NB0600-LF1LF 498 248 291 270 168 146 8 22 32103
220 DN150 162 / / / 354,05
NB0800-LF1LF 673 317 363 295 / 200 12 22 60113
250 DN200 210 / / / 404,44
NBD037-GF3KX NBD037-GF7KF 103 / 74,5 / / 10 / / /28
30 3/8”BSP 30 3/8”BSP 15 17 /1,02
NBD050-GF3KX NBD050-GF7KF 137 82 90 / / 19 / / /40
40 1/2”BSP 38 1/2”BSP 18 24 101,57
NBD075-GF3KXNB0075-GF3LX
NBD075-GF7KFNB0075-GF7LF
137 82 90/ /
19/ / / 40
40 3/4”BSP 38 1/2”BSP18 24
1075 26 4 14 11 1,57 / /
NBD100-GF3KXNB0100-GF3LX
NBD100-GF7KFNB0100-GF7LF
163 99 108/ /
24/ / / 49
48 1” BSP 46 3/4”BSP18 30
1285 32,5 4 14 11 1,92 / /
NBD125-GF3KXNB0125-GF3LX
NBD125-GF7KFNB0125-GF7LF
183 106 115/ /
32/ / / 50
60 1”¼BSP 58 1”BSP23 40
1285 41,3 4 14 12,5 1,96 / /
NBD150-GF3KXNB0150-GF3LX
NBD150-GF7KFNB0150-GF7LF
200 119 134/ /
38/ / / 55
63 1”½BSP 60 1”¼BSP24 46
14100 47,5 4 18 12,5 2,16 / /
NBD200-GF3KXNB0200-GF3LX
NBD200-GF7KFNB0200-GF7LF
236 135 155/ /
49/ / / 62
75 2” BSP 70 1”½BSP25 58
16125 59,1 4 18 16 2,44 / /
NBD250-GF3KXNB0250-GF3LX
NBD250-GF7KFNB0250-GF7LF
271 152 175/ /
62/ / / 68,5
90 2”½BSP 81 2” BSP32 73
18125 72,2 4 18 19 2,69 / /
STEAMVapore
HOT OILOlio caldo A B C D E F J K L M N O P Q R Ch U
Girol srl Rotating UnionsGirol srl Rotating Unions 1514
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
ROTATING UNION FOR STEAM OR HOT OILGiunti rotanti per vapore o olio diatermico
1 2
2
2
2
2
2
2
2
2
2
FLANGED VERSIONVersione attacco a flangia
THREAD VERSIONVersione filettata
MAX FLUID PRESS // PRESSIONE MAX
STEAM ∙ WATER ∙ HOT OIL
STEAM ∙ WATER ∙ HOT OIL
from 3 bar to 35 barsda 3 bar a 35 barVapore ∙ acqua ∙ olio caldo
Vapore ∙ acqua ∙ olio caldo
▲▲
▲▲
From 5 to 400 rpmda 5 a 400 g/min
MAX SPEED // ROTAZIONE MAX
▲▲ 316 °C
MAX TEMPERATURE // TEMPERATURA MAX
▲▲
▲
I giunti GIROL della serie N si suddivisono in due categorie:
•PER VAPORE: la fornitura standard prevede che la parte rotante e la flangia di chiusura siano in acciaio inox.•PER OLIO DIATERMICO:la fornitura standard prevede che il materiale costruttivosia interamente in ghisa.Per entrambe le categoriela tenuta sferica e i cuscinetti sono in grafite impregnata,le filettature GAS cilindricheper la parte fissa (corpo) e GAS conica per la parte rotante (rotore).
The GIROL N series is divided into two
categories:•FOR STEAM: The rotary part and flange are made of stainless steel.FOR HOT OIL: The entire rotary union is made of cast iron.For both categories, the seal and bearings are made with impregnated graphite.The housing, a fixed part, has cylindrical BSP thread while the shaft, the rotary part, has conical BSP thread.
1
1
1
1
1
1
1
1
1
1
1
NBN
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
Girol srl Rotating UnionsGirol srl Rotating Unions 1716
NRD302-GF3KXNR0302-GF3LX
NRD302-GF7KFNR0302-GF7LF
45 2” BSP 387 30 347
NR0402-LF1LF 58 DN 65 464 35 343
NR0502-LF1LF 75 DN 80 567 60 420
NR0602-LF1LF 87 DN 100 685 70 500
NR0802-LF1LF 112 DN 125 723 150 615
NFD302-GF3KXNF0302-GF3LX
NFD302-GF7KFNF0302-GF7LF
1”½ BSP 2¼” BSP 387 30 347
NB0402-LF1LF 2” BSP DN 65 464 35 343
NB0502-LF1LF 2”½BSP DN 80 567 60 420
NB0602-LF1LF 3” BSP DN 100 685 70 500
NB0802-LF1LF 4” BSP DN 125 723 150 615
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
11 22
FLANGED VERSIONVersione attacco a flangia
FLANGED VERSIONVersione attacco a flangia
THREAD VERSIONVersione filettata
THREAD VERSIONVersione filettata
NFD039-GF3KX NFD039-GF7KF M6 1/8”BSP 120 15 107
NFD052-GF3KX NFD052-GF7KF 1/8”BSP 1/4”BSP 150 15 137
NFD077-GF3KXNF0077-GF3LX
NFD077-GF7KFNF0077-GF7LF
1/4”BSP 1/8”BSP 169 15 159
NFD102-GF3KXNF0102-GF3LX
NFD102-GF7KFNF0102-GF7LF
3/8”BSP 1/4”BSP 202 17 187
NFD127-GF3KXNF0127-GF3LX
NFD127-GF7KFNF0127-GF7LF
1/2”BSP 3/8”BSP 232 20 212
NFD152-GF3KXNF0152-GF3LX
NFD152-GF7KFNF0152-GF7LF
3/4”BSP 1/2”BSP 256 25 231
NFD202-GF3KXNF0202-GF3LX
NFD202-GF7KFNF0202-GF7LF
1” BSP 3/4”BSP 296 25 271
NFD252-GF3KXNF0252-GF3LX
NFD252-GF7KFNF0252-GF7LF
1”¼ BSP 1”BSP 337 28 307
NRD039-GF3KX NRD039-GF7KF 6 1/8”BSP 120 15 107
NRD052-GF3KX NRD052-GF7KF 9 1/4”BSP 150 15 137
NRD077-GF3KXNR0077-GF3LX
NRD077-GF7KFNR0077-GF7LF
12 3/8”BSP 169 15 159
NRD102-GF3KXNR0102-GF3LX
NRD102-GF7KFNF0102-GF7LF
16 1/2”BSP 202 17 187
NRD127-GF3KXNR0127-GF3LX
NRD127-GF7KFNR0127-GF7LF
20 3/4”BSP 232 20 212
NRD152-GF3KXNR0152-GF3LX
NRD152-GF7KFNR0152-GF7LF
25 1”BSP 256 25 231
NRD202-GF3KXNR0202-GF3LX
NRD202-GF7KFNR0202-GF7LF
32 1”1/4 BSP 296 25 271
NRD252-GF3KXNR0252-GF3LX
NRD252-GF7KFNR0252-GF7LF
40 1”1/2 BSP 337 28 307
STEAMVapore
HOT OILOlio caldo G G1
(opt.) T V ZSTEAMVapore
HOT OILOlio caldo H S T V Y NT
For NT series it’s the same for NR series,but in the elbow there is one sealfor double indipendent passage
Per la serie NT vale lo stesso discorso della serie NR, ma con la differenza che nella curva è presente una guarnizione che
consente di avere due vie indipendenti.
ROTARY SYPHONWITH SEAL
Tubo sifone rotantecon tenuta
Threaded pipeThe elbow of NF series halp to support the syphonand it will be screwed in the elbow. The thread must be concentric of rotating union’s axis foravoid misalingment
Tubo filettatoLa curva dei giunti serie NF fa da supporto al tubo sifone, il quale si avvita su di essa. Il filetto deve essere concentrico all’asse del giunto per evitare disassamenti rispetto all’asse del rullo
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
DUAL-FLOW UNIONS // FREELY ROTATING SYPHON TUBEGiunti a due vie // tubo sifone rotante libero
DUAL-FLOW UNIONS // FIXED SYPHON TUBEGiunti a due vie // Tubo sifone fisso NRNF
Girol srl Rotating Unions
.
HDD025-GY6GS 3/4”BSP 4167
1/4”BSP42 154 79
/92 24
2,637 1,653 6,062 3,110 3,622 0,944
HD0025-GY6LS FLANGEDflangiato /
671/4”BSP
42 154 794
92/
2,637 1,653 6,062 3,110 3,622
HDD037-GY6GS 1” BSP 5567
3/8”BSP42 154 79
/92 28
2,637 1,653 6,062 3,110 3,622 1,102
HD0037-GY6LS FLANGEDflangiato /
673/8”BSP
42 154 794
92/
2,637 1,653 6,062 3,110 3,622
HDD050-GY6GS 1”1/4 BSP 6079
1/2”BSP53 182 91
/118 29
3,110 2,086 7,165 3,582 4,645 1,141
HD0050-GY6LS FLANGEDflangiato /
791/2”BSP
53 182 914
118/
3,110 2,086 7,165 3,582 4,645
HD0025-GY6GS8
1/8”BSP35
/ / / / / /0,314 1,377
HD0025-GY6LS8
/ /86 70 9 20 12 42
0,314 3,385 2,755 0,354 0,787 0,472 1,653
HD0037-GY6GS10
1/4”BSP40
/ / / / / /0,393 1,574
HD0037-GY6LS10
/ /86 70 9 20 12 42
0,393 3,385 2,755 0,354 0,787 0,472 1,653
HD0050-GY6GS13
3/8”BSP44
/ / / / / /0,511 1,732
HD0050-GY6LS13
/ /108 88 11 20 16 56
0,511 4,251 3,464 0,43 0,787 0,629 2,204
Girol srl Rotating Unions
CODEcodice A B C D E F G J K L
CODEcodice M N P R S T G U V
Girol srl Rotating Unions19
MAX FLUID PRESS // PRESSIONE MAXWATER /HYDR. OIL/AIR
WATER /HYDR. OIL/AIR
350 bars
120o C
acqua ∙ olio idr. ∙ aria
acqua ∙ olio idr. ∙ aria
▲
▲ ▲
▲
From 100 to 120 rpmda 100 a 120 g/min
MAX TEMPERATURE // TEMPERATURA MAX
MAX SPEEDROTAZIONE MAX
▲▲
Caratteristiche principaliMain features1) Autosupportato da cuscinetti a sfera2) Foro di sfiato3) Rotore in acciaio indurito e rivestito al niploy4) Corpo in alluminio anodizzato5) Grandezze da ¼” a ½” GAS
1) Self supporting by two bearings2) Vent hole3) Shaft in steel chemical nickel plated4) Alluminium housing5) Size from ¼” to ½” GAS
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
ROTATING UNION TWO INDIPENDENT DIRECTIONSGiunti rotanti due vie indipendenti
I giunti GIROL della serie HDsono progettati principalmente
per il montaggio su ASPI, ma essendo un prodotto universale consente l’utilizzo su svariate applicazioni, dove si richiedeun giunto due vie indipendenti con pressioni fino a 350 BARe qualsiasi tipo di fluido(olio idraulico, acqua, aria…).L’assialità e la precisione sono garantite dai cuscinetti a sfera. I materiali costruttivi sono , alluminio anodizzato per la parte esterna (corpo) e acciaio al carbonio trattato al niployper parte interna (rotore).
The GIROL HD series is designed for mounting
in a coil machine. However, it is a product that can be used in a variety of applications, whenever a rotary union is necessary with two directions and high pressure capability up to 350 Bars.The alignment and precision are guaranteed by the useof a ball bearing. The external housing is made of aluminum while theinternal rotor is made fromnickel-plated carbon steel.
18
HD
Girol srl Rotating Unions 20
.
ROTATING UNION MULTIDIRECTIONAL // FROM 2 TO 9 DIRECTIONGiunti rotanti multivie // da 2 a 9 vie
I giunti GIROL della serie IHtrovano applicazione
su svariati campi,ad esempio il comandodi cilindri rotanti pnumatici (aria) o idraulici (olio), tavole posizionatrici multistazioni, raffreddamento di cilindri…Il numero delle vie varia a seconda delle esigenze del cliente, cosi come gli attacchi (filettature, dimensionidelle flangie) e i materiali costruttivi. L’assialità ela precisione sono garantite
dai cuscinetti a sfera.
The GIROL IH Seriesis used in a variety
of fields such as controlof a rotating pneumaticor hydraulic cylinder,for multistation tables or for use in a rotating cooling cylinder.The number of directionsis based on customer needs as well as the attachment (threading and dimension of flange). Ball bearings guarantee the alignment.
IH
Caratteristiche principaliMain features1) Progettazione su misura in base alle esigenze2) Autosupportazione mediante due cuscinetti a sfera3) Materiali in base a qualsiasi richiesta4) Numero passaggi da 2 a 9 vie5) Grandezze passaggi da 1/8” a 3” gas6) Adattabilità con collettori elettrici7) Acciaio inox
1) Design on costumer request2) Self supporting by two bearings3) Material on costumer request4) Number of ways from 2 to 95) Dimension of ways from 1/8” a 3” gas6) Adaptable with electrical joint7) Acciaio inox
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
Girol srl Rotating UnionsGirol srl Rotating Unions 2120
MAX FLUID PRESS // PRESSIONE MAX
WATER ∙ HYDR. OIL ∙ AIRacqua ∙ olio idr. ∙ aria
WATER ∙ HYDR. OIL ∙ AIRacqua ∙ olio idr. ∙ aria
WATER ∙ HYDR. OIL ∙ AIRacqua ∙ olio idr. ∙ aria
350 bars
▲▲
▲
From 100 to 300 rpmda 100 a 300 g/min
120°C
MAX SPEED // ROTAZIONE MAX
MAX TEMPERATURE // TEMPERATURA MAX
▲
▲
▲
▲
▲▲
▲
Girol srl Rotating Unions
SPD012-GX6GX42
1/8”BSP7 14 24 44 68
12 24 3001,653 0,275 0,551 0,944 1,732 2,677
SPD025-GX6GX42
1/4”BSP7 14 24 44 68
12 24 3001,653 0,275 0,551 0,944 1,732 2,677
SPD037-GX6GX45
3/8” BSP10 14 24 46 70
14 28 2501,771 0,393 0,551 0,944 1,811 2,755
SPD050-GX6GX58
1/2”BSP12 19 31 51 82
19 38 2002,283 0,472 0,748 1,220 2,007 3,228
SPD075-GX6GX64
3/4”BSP18 20 33 57 90
25 42 1502,519 0,708 0,787 1,299 2,244 3,543
SPD100-GX6GX68
1” BSP23 23 38 62 100
30 48 1002,677 0,905 0,905 1,496 2,440 3,937
SPD125-GX6GX82
1”1/4 BSP30 24 41 67 108
40 58 803,228 1,181 0,944 1,614 2,637 4,251
SPD150-GX6GX90
1”1/2 BSP38 28 49 78 127
46 5 803,543 1,496 1,102 1,929 3,070 4,999
SPD200-GX6GX118
2” BSP48 35 67 108 174
60 65 503,464 1,889 1,377 2,637 4,251 6,850
SPD250-GX6GX154
2”1/2 BSP62 35 74 116 190
75 75 506,062 2,440 1,377 2,913 4,566 7,480
CODECodice A B C D E F G CH.1 CH.1 RPM
g/min
Caratteristiche principaliMain features1) Parti a contatto con fluidi in acciaio inox2) Semplice e rapida manutenzione3) Giunto rotante autosupportato4) Grandezze passaggi da 1/8” a 2”½” gas
1) Parts in contact with fluid made in stainless steel2) Simple and immediate mainteniance3) Self supporting costruction4) Size from 1/8” to 2”½ gas
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
SWIVEL UNION // FOR HIGH PRESSURESnodo girevole // Per alte pressioni
I giunti GIROL della serie SP sono stati progettati
per il passaggio di fluidi (Olio, Acqua, Aria) ad alta pressione (fino a 350 BAR)e basse velocità di rotazione. Il materiale costruttivo delle parti a contatto con il fluido è in acciaio inox. Per pressioni superiori conttattare il nostroufficio tecnico.
The GIROL SP Serieshas been designed
for the passage of fluidat high pressure (up to350 Bars) and at low rotation speeds. The partsin contact with fluid are made from stainless steel. For applications with higher pressures, please contact our technical department.
MAX FLUID PRESS // PRESSIONE MAX
WATER /HYDR. OIL/AIR
WATER /HYDR. OIL/AIR
350 bars
120o C
acqua ∙ olio idr. ∙ aria
acqua ∙ olio idr. ∙ aria
▲
▲ ▲
▲
From 300 to 50 rpmda 300 a 50 g/min
MAX TEMPERATURE // TEMPERATURA MAX
MAX SPEEDROTAZIONE MAX
▲▲
Girol srl Rotating UnionsGirol srl Rotating Unions 2322
SP
2524
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
Girol srl Rotating Unions Girol srl Rotating Unions
ABD025-GS2KS59
1/4”BSP6 11 21 71 92
14 21 3.0002,322 0,236 0,433 0,826 2,795 3,622
ABD037-GS2KS66
3/8” BSP10 12 22 79 101
17 26 2.5002,898 0,393 0,472 0,866 3,110 3,976
ABD050-GS2KS74
1/2”BSP13 14 25 85 110
22 30 2.0002,913 0,511 0,551 0,984 3,375 4,354
ABD075-GS2KS84
3/4 ”BSP18 14 25 85 123
26 36 1.5003,307 0,708 0,551 0,984 3,375 4,842
ABD100-GS2KS97
1” BSP24 17 33 95 145
32 43 1.0003,818 0,945 0,669 1,299 3,745 5,708
ABD125-GS2KS112
1”/4 BSP32 21 41 112 165
46 54 1.0004,409 1,259 0,826 1,614 4,409 6,496
ABD150-GS2KS118
1”1/2 BSP38 25 48 118 165
46 60 8004,645 1,496 0,984 1,809 4,645 6,496
ABD200-GS2KS138
2” BSP48 32 54 129 183
55 74 5005,413 1,889 1,259 2,125 5,078 7,204
CODECodice A B C D E F G CH.1 CH.1 RPM
g/min
Caratteristiche principaliMain features1) Cuscinetti a due corone di sfere2) Progettato per alte velocità e pressioni3) Disponibili grandezze da ¼” a 2”gas
1) Double row contact ball bearings2) Design for high pressure and high speed rotation3) Size from ¼” to 2”gas
MAX FLUID PRESS // PRESSIONE MAX
WATER /HYDR. OIL/AIR 300 barsacqua ∙ olio idr. ∙ aria
▲ ▲
From 3.000 to 500 rpmda 3.000 a 500 g/min
MAX SPEEDROTAZIONE MAX
▲▲
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
ROTATING UNION // FOR HIGH PRESSURE AND SPEEDGiunto rotante // Per alte pressioni e velocità
I giunti GIROL delle serie AB, sono utilizzati
in applicazioni ad alta pressione (300 BAR) unita ad alte velocità di rotazione. La robustezza dei cuscinetti consente di sostenere elevati carichi assiali dovuti dalla spinta delle alte pressioni. Il materiale costruttivo è acciaio al carbonio
nichelato chimicamente.
The GIROL AB Series is used in applications
with high pressure andat high rotation speed. A special bearing supports axial loads derivates for high pressure.The union is made of nickel plated carbon steel.
AB
WATER /HYDR. OIL/AIR 120o Cacqua ∙ olio idr. ∙ aria
▲ ▲
MAX TEMPERATURE // TEMPERATURA MAX
Girol srl Rotating Unions
1
2
Girol srl Rotating UnionsGirol srl Rotating Unions
Caratteristiche principaliMain features1) Cuscinetti a sfera ad alta velocità2) Progettato per rotazioni senza passaggio di fluido3) Corpo in alluminio anodizzato4) Labirinto di protezione cuscinetti5) Tenute meccaniche in carburo di silicio
1) high speed ball bearings2) Designed for rotating without fluids3) Housing in alluminium anodizing4) System for reserve the bearing5) Silicon carbide seal
ON-OFF025-L1 1/4”BSP43 5 M10
X 1 LH11 12 6 21 120 92
1/4”BSP 21 141,692 0,196 0,433 0,472 0,236 0,826 4,724 3,622
ON-OFF037-L1 3/8”BSP51 9 M16 X
1,5 LH18 11 5 30 140 99
3/8”BSP 21 242,00 0,354 0,708 0,433 0,196 1,181 5,511 3,897
ON-OFF025-L9 1/4”BSP43 5 M10
X 1 LH11 12 6 21 133 92
1/4”BSP122
21 141,692 0,196 0,433 0,472 0,236 0,826 5,263 3,622 4,802
ON-OFF037-L9 3/8”BSP51 9 M16
X 1,5 LH18 11 5 30 147 99
3/8”BSP134
21 242,00 0,354 0,708 0,433 0,196 1,181 5,787 3,897 5,275
AXIAL VERSIONVers. Assiale A B C D E (g6) G H J K L M Ch.1 Ch.2
RADIAL VERSIONVers. Radiale A B C D E (g6) G H J K L M N Ch.1 Ch.2
120o C
▲
MAX TEMPERATURE // TEMPERATURA MAX
MAX FLUID PRESS // PRESSIONE MAX
1 2
AXIAL VERSIONVersione assiale
RADIAL VERSIONVersione radiale
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
From 10.000 to 20.000 rpm
70 bars
COOLING FLUIDS
COOLING FLUIDS
COOLING FLUIDS
da 10.000 a 20.000 g/minliquidi refrigeranti
liquidi refrigeranti
liquidi refrigeranti
MAX SPEED // ROTAZIONE MAX
▲
▲
▲
▲
▲
▲
▲
▲▲
ROTATING UNION // FOR DRY ROTATIONGiunto rotante // Per rotazioni a secco
I giunti GIROL della serie ON-OFF sono progettati
per il passaggio di fluidi refrigeranti attraversoi mandrini delle macchine utensili. Questi giunti possono ruotare anchea secco (senza passaggio di fluido) insieme ad alte velocità di rotazione(fino a 20000 giri/min).Il materiale costruttivodella parte fissa esternaè alluminio anodizzato,mentre per la parte rotante interna è acciaioal carbonio nichelato.
The GIROL ON-OFF Series has been designed for
the passage of refrigerant fluids through the spindles of machine tools. This union can also operate without fluids passing(dry rotation) up to a high speed of 20,000 RPM.The fixed external part is made of anodized aluminum and the rotary part is made of nickel plated carbon steel.
2726
ONOFF
28 29Girol srl Rotating Unions
ROTATING UNION MONOFLOWGiunto Monovia
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
..
Girol srl Rotating Unions
.
KMD025-GY6GX 1/4”BSP6 36
/60 74
1714,5
5200.236 1.417 2.362 2.914 0,571
KMD037-GY6GX 3/8” BSP10 44
1/4”BSP68 90
2216
5000.394 1.732 2.677 3.543 0.630
KMD050-GY6GX 1/2”BSP13 52
3/8”BSP76 101
2718
4500.512 2.047 2.992 3.976 0.709
KMD075-GY6GX 3/4”BSP18 57
1/2”BSP80 111
3220
4000.709 2,244 3,150 4,370 0,787
KMD100-GY6GX 1” BSP24 73
3/4”BSP97 134
4123
3500.945 2,874 3,819 5,276 0,906
KMD125-GY6GX 1”1/4 BSP32 87
1” BSP113 158
5029
3001.260 3,425 4,449 6,220 1,142
KMD150-GY6GX 1”1/2 BSP38 94
1”¼”BSP117 166
5531
2501,496 3,701 4,606 6,535 1,220
KMD200-GY6GX 2” BSP48 108
1”1/2 BSP131 189
6535
2001,890 4,252 5,157 7,441 1,378
CODECodice A B C D E F L M RPM
g/min
Caratteristiche principaliMain features1) Cuscinetti a sfera 2) Versioni per passaggio fluidi alimentali in acciaio inox3) Grandezze standard da 1/4” a 2” gas
1) Ball bearings2) Version for passage with food fluids3) Size from 1/4” to 2” gas
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
MAX TEMPERATURE // TEMPERATURA MAX
▲▲ ▲
▲
MAX FLUID PRESS // PRESSIONE MAX
AIR // aria
AIR // aria
12 bars
80º C
from 150 to 520 rpmda 150 a 520 g/min
70 bars
110º C
▲
▲ ▲
▲▲▲
WATER ∙ OIL ∙ FLUIDSacqua ∙ olii ∙ fluidi
WATER ∙ OIL ∙ FLUIDSacqua ∙ olii ∙ fluidi
AIR ∙ WATER ∙ OIL ∙ FLUIDSaria ∙ acqua ∙ olii ∙ fluidi
MAX SPEED // ROTAZIONE MAX
UNIVERSAL ROTATING UNION WITH ROTARY SEALSGiunti rotanti universali con guarnizioni striscianti
La fornitura standard deigiunti GIROL della serie K
prevede il rotore con filettatura cilindrica GAS destra o sinistra.La tenuta viene effettuata con guarnizioni striscianti in teflon e viton. Il materiale costruttivo per la parte rotante è acciaio al carbonio trattato al niploy e la parte esterna in alluminio anodizzato. Su richiesta si eseguono versioni specialiin acciaio inox AISI 316/304per usi alimentari.
The GIROL K Series is for air use up to 12 Bars and
fluid use up to 70 Bars.This union has a shaft with cylindrical BSP threading (right or left-handed available).The seal is made of teflon and viton.The fixed external part is made of anodized aluminum and the rotary part is made of nickel plated carbon steel. On request,we can make unions in stainless steel AISI 316/304 for the food industry.
KMK
28Girol srl Rotating Unions
30 31Girol srl Rotating Unions Girol srl Rotating Unions
KFD039-GY6GX / M8X1 1/8”BSP15 105 122
0,591 4,133 4,803
KFD052-GY6GX / 1/8”BSP 1/4”BSP15 100 134
0,591 3,937 5,276
KFD077-GY6GX 1/8”BSP 1/4”BSP 3/8”BSP15 110 147
0,591 4,331 5,787
KFD102-GY6GX 1/4”BSP 3/8”BSP 1/2”BSP15 130 174
0,591 5,118 6,850
KFD127-GY6GX 3/8”BSP 1/2”BSP 3/4”BSP25 155 203
0,984 6,102 7,992
KFD152-GY6GX 1/2”BSP 3/4”BSP 1”BSP25 165 222
0,984 6,495 8,740
KFD202-GY6GX 3/4”BSP 1”BSP 1”1/4 BSP25 185 248
0,984 7,283 9,764
KRD039-GY6GX 6 40 950,263 1,575 3,740
KRD052-GY6GX 9 40 1050,354 1,575 4,133
KRD077-GY6GX 12 50 1150,472 1,969 4,527
KRD102-GY6GX 16 50 1650,630 1,969 5,496
KRD127-GY6GX 20 60 1900,787 2,362 7,480
KRD152-GY6GX 25 60 2000,984 2,362 7,874
KRD202-GY6GX 32 60 2221,260 2,362 8,898
CODECodice G1 (optional) G N R U Z
CODECodice H S V
Turning pipeRotating syphon are fixed internally with the roll for rotating with it. The KR elbow help to support the elbow help to support the pipe and restrict crosstalk passages. The pipe must be straight and concentric to the center line to avoi center line to avoid excespipe and restrict crosstalk passages. The pipe must be straight and concentric to the center line to avoi center
Tubo tornitoI tubi rotanti sonofissati internamente al rullo per ruotare insieme con esso. La curva KR fa da supporto al sifone,il quale deve essere concentrico all’asse del giunto per evitare carichi eccessivi su di esso.Una rotazione superiorea 1.000 g/min èda evitare
For KT series it’s the same for KR series, but in the elbow there is one seal for double indipendent passage
Per la serie KT vale lo stesso discorso della serie KR, ma con la differenza che nella curva è presente una guarnizione che consente di avere due vie indipendenti.
DUAL-FLOW UNIONS // ROTATING SYPHON TUBE WITH SEALGiunti a due vie // Tubo Sifone rotante con tenuta
Tubo filettatoThreaded pipeLa curva dei giunti serie KF fa da supporto al tubo sifone,il quale si avvita su di essa.Il filetto deve essere concentrico all’asse del giuntoper evitare disassamenti rispetto all’asse del rullo
The elbow of KF series halp to support the syphon and itwill be screwed in the elbow.The thread must be concentric of rotating union’s axis foravoid misalingment
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
KT
DUAL-FLOW UNIONS // FREELY ROTATING SYPHON TUBEGiunti a due vie // Tubo sifone rotante libero
DUAL-FLOW UNIONS // FIXED SYPHON TUBEGiunti a due vie // Tubo sifone fisso KRKF
32 33Girol srl Rotating Unions
ROTATING UNION MONOFLOW // EXTERNAL MOUNTINGGiunto monovia // Montaggio esterno
.
Girol srl Rotating Unions
MSD050-GB2GS 1/2” BSP13 57 17 30 111
20 290.512 2,244 0,669 1,181 4,373
MSD075-GB2GS 3/4”BSP18 64 20 34 136
25 400,709 2,519 0,787 1,338 5,354
MSD100-GB2GS 1”BSP24 64 20 38 143
30 400.945 2,519 0,787 1,496 5,629
MSD125-GB2GS 1”1/4 BSP32 87 24 45 167
38 501,260 3,425 0,944 1,771 6,574
CODECodice A B C D E F Ch.1 Ch.2
Caratteristiche principaliMain features1) Versione mono e doppio passaggio 2) Corpo e parte posteriore in ottone3) Versioni speciali su misura4) Tenute meccaniche in carburo di silicio
1) Version mono e double flow2) Housing in brass3) Special version on costumer request4) Silicon carbide seal
MAX FLUID PRESS // PRESSIONE MAXWATER // acqua
WATER // acqua
10 bars
▲▲
100 rpm g/min
MAX SPEED // ROTAZIONE MAX
▲▲
120 °C
MAX TEMPERATURE // TEMPERATURA MAX
▲ ▲
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
ROTARY UNION // FOR CONTINUOUS CASTING MACHINESGiunto rotante // Per impianti di colata continua
Igiunti GIROL della serie M sono progettati per essere
incassati nei rulli delle linee di colata continua. Le tenute sono in carburo di silicio per resistere alle acque sporche delle acciaierie.Lo standard prevedeil materiale costruttivo è l’ottone, sia per la parte fissa che per la parte rotante.Su richiesta si eseguono versioni speciali.
The Girol M Series has been designed for mounting in
the roll cylinder of continuous casting machines.To withstand dirty water,the seals are made of silicon carbide. The housing is traditionally made in brass.Special versions are available upon request.
MSM
32Girol srl Rotating Unions
34 35Girol srl Rotating Unions Girol srl Rotating Unions
Caratteristiche principaliMain features1) Versione mono e doppio passaggio 2) Montaggio incassato3) Corpo e parte posteriore in ottone4) Versioni speciali su misura5) Tenute meccaniche in carburo di silicio
1) Version mono e double flow2) In shaft mounting3) Housing in brass4) Special version on costumer request5) Silicon carbide seal
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
MM0050-LB2LX59 46,2 38
3/4” BSP4 47 60 62 19
2,322 1,811 1,496 0,157 1,850 2,362 2,440 0,748
MM0075-LB2LX73 58,8 38
3/4”BSP5 47 78 82 25
2,874 2,322 1,476 0,196 1,850 3,070 3,228 0,984
MM0100-LB2LX86 71 47
1”BSP5 61 87 93,5 38
3,385 2,795 1,850 0,196 2,401 3,444 3,581 1,496
MD0050-LB2LX59 46,2 38
3/4” BSP4 42 60 62 66
2,322 1,811 1,496 0,157 1,652 2,362 2,440 2,596
MD0075-LB2LX73 58,8 38
3/4”BSP5 42 78 82 82
2,874 2,322 1,476 0,196 1,652 3,070 3,228 3,228
MD0100-LB2LX86 71 47
1”BSP5 66 87 93,5 96
3,385 2,795 1,850 0,196 2,593 3,444 3,581 3,779
MD0050-LB2LX51 48 108 85 13 19
2,007 1,889 4,251 3,346 0,511 0,748
MD0075-LB2LX51 61 139 85 19 25
2,007 2,401 5,472 3,346 0,748 0,984
MD0100-LB2LX64 62,5 150 101 28,7 38
2,519 2,460 5,905 3,976 1,129 1,496
CODECodice A B C D E F G H S CODE
Codice A B C D E F G H M
CODECodice N O P R S T h9
ROTATING UNION DOUBLE FLOW // IN SHAFT MOUNTINGGiunto a due vie // Montaggio incassato
ROTATING UNION MONOFLOW // IN SHAFT MOUNTINGGiunto monovia // Montaggio incassato MDMM
36 37Girol srl Rotating Unions
.
Girol srl Rotating Unions
ZMD037-000D3 ZMD037-000D242
3/8” BSP10
3/8” BSP14 25 54,5 16
3.500 221,653 0,394 0,511 0,984 2,145 0,630
ZMD050-000D3 ZMD050-000D255
1/2”BSP13
1/2”BSP16 28 60,5 18
3.000 272,165 0,512 0,629 1,102 2,381 0,709
ZMD075-000D3 ZMD075-000D263
3/4”BSP18
3/4”BSP18 31 71,5 20
2.500 322,480 0,709 0,708 1,220 2,814 0,787
ZMD100-000D3 ZMD100-000D280
1” BSP24
1” BSP21 38 78,5 23
2.000 413,150 0,945 0,826 1,496 3,090 0,906
GRAPHITE-INOXGrafite-inox
SILICON-SILICONSilicio-Silicio A (h8) B C D E F G H RPM
g/min CH.
Caratteristiche principaliMain features1) Cuscinetti a sfera 2) Versioni speciali su richiesta3) Acciaio nichelato chimicamente4) Possibilità di montaggio assiale, con curva o incassato5) Disponibili grandezze da 3/8” a 1” gas
1) ball bearing2) Special version on request3) Nichel plated steel4) Possibility of axial mounting, with elbow or in shaft5) Size from 3/8” to 1”gas
MAX FLUID PRESS // PRESSIONE MAX
MAX SPEED // ROTAZIONE MAX
MAX TEMPERATURE TEMPERATURA MAX
AIR // ariaAIR // aria
12 bars80º C▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
WATER ∙ OILS ∙ FLUIDSacqua ∙ olii ∙ fluidi
AIR ∙ WATER ∙ OILS ∙ FLUIDSaria ∙ acqua ∙ olii ∙ fluidi
WATER ∙ OILS ∙ FLUIDSacqua ∙ olii ∙ fluidi70 bars
110º C
From 2.000 to 3.500 rpmda 2.000 a 3.500 g/min
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
ROTATING UNION // AXIAL OR IN SHAFT MOUNTINGGiunto rotante // Per montaggio assiale o incassato
La fornitura standard comprende il rotore con
filettatura cilindrica GAS destra o sinistra. Su richiesta forniamo rotori filettati secondo altri standard.La tenuta standard(grafite su acciaio Inox)si utilizza per aria e per acqua con filtraggio pari pari ad almeno 20 micron. Per liquidi con pressioni superioria 60 bar si consiglia di consultare un nostro tecnico.
The standard supply provides the rotating
nipple threaded cilindrical GAS right or left. On the request we supply other standard. Standard seal (graphite vs. stainless steel) in used for air and for water or hydraulic oil, seal of silicon carbide vs. silicon carbide in suggested.For liquid at pressure more than 60 bar (870 PSI) please contact our technician.
Z
36Girol srl Rotating Unions
38 39Girol srl Rotating Unions
MAX OIL PRESS pressione max olio 12 bar
MAX AIR PRESS pressione max aria 10 bar
MAX TEMPERATURE temperatura max 60 °C
▲▲
▲
▲▲
▲
Girol srl Rotating Unions
▲
FIXED PARTSParti fisse
ROTATING PARTSParti rotanti
FIXED PARTSParti fisse
RR ROTATING SWIVEL LUBRICATION // VERY LOW SPEEDSnodo girevole per lubrificazione // Velocità molto basse
SIMPLE ELBOW // FOR FIXED SYPHONSSnodo semplice // Per sifoni fissi E
RRD012-GB6GS 1/8”BSP29 3 7,5 33 25,5 15 21 8
141,141 0,128 0,295 1,300 1,003 0,590 0,826 0,314
RRD025-GB6GS 1/4”BSP31 5 12 43 31 20 21 10
191,220 0,196 0,472 1,692 1,220 0,747 0,826 0,393
RRD037-GB6GS 3/8” BSP40 7 13 54 41 28 27 13
241,574 0,275 0,511 2,125 1,614 1,102 1,063 0,511
RRD050-GB6GS 1/2”BSP46 11 16 60 44 30 31 15
301,811 0,433 0,629 2,362 1,732 1,181 1,220 0,590
RRD075-GB6GS 3/4”BSP58 18 20 72 52 35 39,5 18,5
322,283 0,708 0,787 2,834 2,047 1,377 1,555 0,728
RRD100-GB6GS 1” BSP68 23 23 86 63 42 46 22
382,677 0,905 0,905 3,385 2,480 1,653 1,811 0,866
RRD081-GB6GS M8X129 3 7,5 33 25,5 15 21 8
141,141 0,128 0,295 1,300 1,003 0,590 0,826 0,314
RRD101-GB6GS M10X129 3 7,5 33 25,5 15 21 8
141,141 0,128 0,295 1,300 1,003 0,590 0,826 0,314
E-0025-00-X0 1/4”BSP21,5 16 330,846 0,629 1,299
E-0037-00-X0 3/8” BSP28 21 40
1,102 0,826 1,578
E-0050-00-X0 1/2”BSP35 26 49
1,377 1,023 1,929
E-0075-00-X0 3/4”BSP40 31 58
1,574 1,220 2,283
E-0100-00-X0 1” BSP50 36 65
1,968 1,417 2,559
E-0125-00-X0 1”1/4 BSP60 46 78
2,362 1,811 3,070
E-0150-00-X0 1”1/2 BSP65 51 87
2,559 2,007 3,425
E-0200-00-X0 2” BSP80 51 93
3,149 2,007 3,661
E-0250-00-X0 2”1/2 BSP100 60 170
3,937 2,362 6,692
E-0300-00-X0 3” BSP120 108 182
4,724 4,251 7,165
CODECodice A B C D E F G H I CH.
CODECodice A B C D
Caratteristiche principali
Caratteristiche principali
Main features
Main features
1) Grandezze da 1/8” a 1”2) Rotore in acciaio nichelato3) Filettature GAS/BSP o metriche4) Corpo in ottone
1) Versioni speciali su richiesta2) Acciaio Inox AISI con boccola in bronzo3) Disponibili grandezze da1/4” a 3” GAS
1) Sizes from 1/8” to 1”2) Niployed steel rotor3) BSP/NPT or metric thread4) Brass housing
1) Special version on request2) Stainless steel AISI 420 with brass bush3) Size from 1/4” to 3” GAS
For left thread, the third letter of code change replacing “D” with “S”Per filettature sinistre, la terza lettera del codice varia sostituendo “D” con “S”
Girol srl Rotating UnionsGirol srl Rotating Unions
Girol srl Rotating UnionsGirol srl Rotating Unions
RETAILERSRivenditori
SPAIN
BRAZIL
FRANCE
UKRAINE
POLAND
CHINA
TURKEY
GREECE
INDIA
GERMANY/AUSTRIA
LIDERING S.A.Pg, Ferrocalliris Catalans
106-108
Cornella de llobregat 8940
0034 93 48404422E-mail: [email protected]
www. lidering.es
ARTEN FREIOSE EMBREAGENS LTDA.Rua dos Narcisos, 84
Vila Mariana - São Paulo, SP
CEP: 04048-040
(11)5594/8333
E-mail: [email protected]
DIMAFLUID SAS67/73 Bld Victor Hugo
Batiment 6-8
Saint Ouen 93400
0033 149456565E-mail: [email protected]
www.dimafluid.com
INVEST-M ENGINEERING. LTD.49000, Dnepropetrovsk city, Ukraine, Chkalov Str., 44, office 705. Tel /Fax: +38 0562 32 08 25 [email protected]
INTROX SP. Z O.Oul. Zytnia 5
Swarzedz 62-020
0048 616515331E-mail: [email protected]
www.introx.biz
ORHMEK L.T.D.S.T.IKucuk San Sit.9 block nr.7
Gedelek Orhangazi Bursa 16825
0090 02245860032 0090 0534331722E-mail: [email protected]
www.orhmek.com
SHANGAI WIND COMPANY, LTD
#568 Hua Bao Road, Hua Ting Town,
Jia Ding District, Shanghai 201816
(86) 021-3990 0269 Fax: (86) 021-3990 0136Sales tel: 136 3636 0932E-mail: [email protected]
www.ompisrl.com.cn
KWS INDUSTRIETECHNIK GMBHEichendorfsstrasse 23 b
Rielasingen 78239
0049 7731 919300E-mail: [email protected]
www.kws-industrietechnik.de
Llidering S.A.
Pg, Ferrocalliris Catalans
106-108
Cornella de llobregat 8940
Tel. 0034 93 48404422
via Piemonte 14, Carate Brianza (MB)20841 ITALY +39 0362-905204 Fax +39 0362-992972E-mail: [email protected]
CONTACT US DIRECTLY
40 41
Contatto direttoTECNOPNEUMATIC S.AIera Odos 97
Athenes 11855
0030 210 3470500E-mail: [email protected]
www.tecnopneumatic.gr RKB INTERNATIONALBisra road, Rourkela - 769 001,
Odisha, India
(Off.) +91-661 250 0141 +91-94 370 46793Fax: +91-661 250 0141E-mail: [email protected]
Girol srl Rotating Unions 42
ANNOTATIONS // NOTE
www.girol.it via Piemonte 14, Carate Brianza (Mb), 20841 ITALY
+39 0362-905204 Fax +39 0362-992972 E-mail: [email protected]
www.girol.it
CONTACT US // CONTATTACI
girolsrl
srl
GIUNTI ROTANTI - ROTATING UNIONS
girolsrlGIUNTI ROTANTI - ROTATING UNIONS
girolROTATING UNIONS - GIUNTI ROTANTI