______________ ______________________________ __________Installation instr uction Issued by PM Approved by DG Rev.02 Dated 10/04/08 page 1/5 Applicability: GILERA GP 800 ‘08 1. Turn the engine off. 2. Remove the engine plastic lid and the front lateral fairings. ______________ ______ Feeding vo ltage section_____________ ________1. Locate and unpl ug the stock black two-way connectors loc ated on the injecto rs (see pict.1) pict.1 2. Plug the black tw o-way connectors o f the RAPID BIKE wiring harness to stock black two-way connectors previously unplugged. (see pict.2). The connector marked with red tape must be plugged to the front cylinder. pict.2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
3. Locate and unplug the stock black three-way connector located on the left side ofthe motorcycle. (see pict.3.)
pict.3
4. Connect the green wire of the RAPIDBIKE wiring harness to the stock wire markedwith the letter “C”(see pict.4.) and place back the stock connector previouslyunplugged.