Italian manufacturer of high quality pizza tools dal 1986 2014
Italian manufacturer of high quality pizza tools
dal 1986
20
14
dal 1986
3www.gimetalusa.com
GI.METAL: The company 6
What we do 6
How we do it 6
Quality 7
Peel configuration guide 8
The lines and their uses 11
GI.METAL group 48
Our site 49
Facts that make GI.METAL the worlds best peels! 50
Terms and shipping information 51
TABLE OF CONTENTS
4
INTO THE OVEN
GHA - Hygienic and hard-wearing 12
CARBON - Sophisticated and light 13
AZZURRA - Practical and flexible 14
AMICA - Simplified 16
Round peels 18
Rectangular peels 21
Peels for pizza by the metre 25
Small peels 26
TOOLS-HOLDEr
Counter-top, wall-mounted, free-standing, floor-standing 28
TO BrUSH
Scrape, brush and clean in complete safety 30
ON THE FIrE
Tools for a wood oven 32
DUrING COOKING
Screens (and screen-holders), grippers 34
CONTENTS ACCORDING TO CATEGORIES OF USE
5www.gimetalusa.com
TO PrEPArE
Dough-cutters, scrapers, cases, tab grabs, rolling pins, ladle, oil cans 36
PIZZA-SErVErS
Practical, impact- and heat-resistant 38
TO CUT
Cutters: cutting, pre-cutting, double-wheeled (cut and carve), mincing knife, rocker cutter 40
TO SErVE
Trays, brackets 42
PIZZA SET 44
ExTrA
Display units for sales points 46
6
GI.METAL: THE COMPANY
GI.METAL ALL-ITALIAN CARE WITH NATIONAL DESIGN AND PRODUCTIONGI.METAL is an Italian company that produces to its own designs.
WHAT WE DO
PIZZA TOOLS AND TROLLEYSOne single philosophy lies behind two different production activities: pizza accessories and catering trolleys.Creativity, research and perfectionism come together in a series of tools designed for a wide range of uses: for professional and recreational use alike, for those who make and serve pizza and those who handle foodstuffs, kitchenware and food courses in restaurant kitchens and dining rooms.
HOW WE DO IT
UNEXPECTEDLY LIGHT AND IDEALLY HARD-WEARINGThe materials and production methods used are constantly analysed and updated to obtain maximum functionality, ease of use, solidity and safety, as confirmed by the TÜV certifications awarded, attesting to the products’ suitability for their intended use.
CUTTING-EDGE TECHNOLOGICAL MATERIALS
> Rigorously European-origin stainless steel with low nickel percentage to avoid the risk of allergy as is often caused by this metal.
> The aluminium alloy treatments adopted are intended to increase the products’ resistance and hygiene.
> The use of innovative polymers for plastic die cast handles renders our products resistant to high temperatures and collisions.
THREE LEVELS FOR ALL NEEDS
GI.METAL has profiled three types of users and has developed its products accordingly for three different levels of use, within which different lines are available with different materials and functions
> 1 | HIGH PERFORMANCE: innovative products, for intensive use.
> 2 | PROFESSIONAL STANDARD: classic, traditional products, for regular and continuous use.
> 3 | MODERATE USE: domestic products, for occasional or recreational home use.
Azienda certificata ISO 9001:2008 Certificato Nr 50 100 11994
DESIGN
TESTING AND CERTIFICATION
PRODUCTION AND DISTRIBUTION
NEEDS ANALYSIS
GI.METAL guarantees pleasure and satisfaction in the use of its products. We are committed to continually improving efficiency and comfort for our users. JUST SEE FOR YOURSELVES.
Marco D’Annibale
QUALITY. 4 CORPORATE STEPSoriginality, functionality, innovation, durability
7www.gimetalusa.com
8www.gimetalusa.com
PEEL CONFIGUrATION GUIDE
THE SUSTAINABLE LIGHTNESS OF THE PIZZA-MAKERAND CHOICE CRITERIA
GI.METAL peels have been designed to act as the extension of the pizza-maker's own arm.
PEELS MADE-TO-MEASURE
The variety of materials and sizes available, the alternative head shapes and head-handle fixing systems and the solid or perforated flat peels mean that everyone can shape their peel to measure.
TO SLIDE IT IN OR TAKE IT OUT?
> The peels designed to pick the pizza up off the worktop and slide it into the oven must have sizes and shapes to hold different types of pizza and must have lengths suited to different workspaces: if a peel is too long, it would be cumbersome, whereas if it is too short, it would be difficult to manage the oven properly.
> GI.METAL small peels are agile and precise to handle: they can turn the pizza when it is in the oven, check to see if it is cooked, lifting the base, and take it out cooked when rigid. The sizes identified by GI.METAL guarantee the perfect surface area.
RECTANGULAR OR ROUND?
The GI.METAL peel used to slide the pizza into the oven is designed to provide a secure, precise holder for the pizza, ensuring an easy, secure grip.
> The rectangular peel is a safe, traditional choice; it offers a larger surface area in contact with the pizza and the grip point, with which to lift the pizza, is only milled at the front.
> The round peel has an extended grip point with a gentle, regular milled beveled edge over a large extension of the curve, enabling the pizza-maker to take up the pizza even from the side and thus not only from the front.This peel is developed by GI.METAL with a view to increasing oven efficiency: as there are none of the corners we find on the rectangular peel, more pizzas can be placed in the oven at any one time, whilst ensuring correct movement despite the larger quantities.Its shape recalls that of the pizza and it is practical and secure in all its GI.METAL versions.
9
THE THREE RIVETS: A SECURE, HARD-WEARING DESIGN
The high performance peels stand out for the innovative head-handle joint with three rivets in line, designed to ensure an incredibly hard-wearing joint that is better than any other option (remember that airplane parts are assembled with rivets).
> The ribbed handle extension below the peel guarantees even greater stability.
> The aluminium handles are lightened and reinforced with a special process that ribs the handle longitudinally as it can be seen in the internal milling.
> The steel or aluminium head is strengthened by the special folds and ribbing used to the side and in the centre.
PERFORATION: THE HOLES THAT FACILITATE FLOUR REMOVAL
GI.METAL first studied and developed holes on the blades of the peels, pizza-servers and small peels, whose number, shape and beveled edge type enable to:
> Guarantee easiest sliding: less surface area means less friction (the hole milling is such that not even the softest dough can become stuck); consequently, more flour can be used to reduce friction on the pizza base.
> Reduce weight (perforating the metal makes it lighter).
> Eliminate any flour that may have been left under the pizza during dusting, leaving the oven clean.
> Reduce the frequency with which the oven needs to be brushed and avoid flour stuck on the base of the pizza burning, giving it a bitter flavor.
1 | HIGH PERFORMANCE: GHA, CARBON
Peels and tools suitable for intense use: the innovative manufacturing techniques ensure extreme efficiency in terms of yielding a light, yet hard-wearing design that is resistant to heat and wear, practical and easy to handle.They differ in terms of finish types and materials, from the GHA anodising that gives it the golden color.
ERGONOMICS
The oval tubular handles (30x15 mm) ensure stability and prevent rotation.The technology used has resulted in a fairly slim (0.6 mm), light tubular product, strengthened by special internal ribs making it stable and firm.
PRACTICALITY
The aluminium heads have been designed to remain flexible, allowing for a spatula effect (the right pressure exerted on the peel flexes it and allows it to adhere to the work surface), thereby facilitating pizza lifting.
> The central ribbing makes the head more rigid when it is lifted and, together with the lateral ribbing, ensures that it can hold large weights.
> The golden (GHA), hard (CARBON) anodising makes the surface event, aesthetically pleasant and protects it from oxidisation.
> The gentle, regular milled beveled edge makes it easier to position the pizza and the rectangular head has rounded corners to make it a little "softer".
10
2 | PROFESSIONAL STANDARD: AZZURRA
Professional standard peels meet the demand for hard-wearing yet easily-handled professional tools.
The manufacturing techniques of the AZZURRA line are similar to those of Excellence GHA series in terms of thickness, material and strength of mounting of the head. The AZZURRA series represents the widest range of products in assortment and more popular in sales.
SMALL PEELS WITH SLIDING HIGHLY-RESISTANT INSULATION
This solid small peel is ultra-light thanks to the 14 mm tubular metal used and available in versions with a solid head or fine, diffused holes to reduce the weight. It is built entirely from stainless steel, thereby avoiding the heat from the oven from being transmitted, whilst the handle base and interim sliding grip are in a specific high-density polymer with excellent impact- and heat-resistance.
> It guarantees perfect insulation of hands from heat and ensures easy sliding of the interim element, which in the wooden version is lacking due to the characteristic thermal dilation.
> A specific fitting on the handle base can block the interim element and make it available up high when the small peel is rested head down.
3 | MODERATE USE: AMICA
With this range of peels, GI.METAL has chosen to fully satisfy those only making pizza on an occasional basis, whether professionally or in the family home, providing an extremely simple, yet effective tool.
11www.gimetalusa.com
1HIGH PErFOrMANCE
line page
GHA 12
CARBON 13
2PrOFESSIONAL STANDArD
line page
AZZURRA 14
3MODErATE USE
line page
AMICA 16
THE LINES AND THEIR USES
12
> WHAT GHA (Golden Hard Anodizing) rEALLY ISGHA is a special treatment of Japanese origin; it is an anode oxidisation with subsequent sealing of the micro-pores using silver ions, resulting in an aluminium alloy with superlative performance and characteristics.
> ADVANTAGES• SLIDES EASILY (little friction)• HYGIENIC (high anti-bacterial and anti-mould capacity)• LONG-LASTING• RESISTANT to heat, corrosion, impact and wear• GOLDEN COLOR
> THE PEEL THAT SETS A TrENDThis treatment penetrates the alloy and, although it cannot be removed, with use will undergo minor color changes that give the tools a more "vintage" look
> ErGONOMICThe peel handles are in an oval tubular design to increase stability.
> HArD-WEArING AND SECUrE: THE THrEE rIVETSThe head-handle joint consists of the overlay of two elements secured by three large rivets in line, to guarantee complete safety and no movement (see p. 9).
> SLIDES TWICE AS EASILY: PErFOrATION AND LOW FrICTION TrEATMENTThe head of GHA peels and small peels is completely perforated (see p. 9) with holes that have been specifically designed to release flour, preventing it from sticking to the bottom of the pizza and risking to get burnt.GHA treatment makes it self-lubricating, drastically reducing friction.
> APPrOVED BY ASSOCIAZIONE VErACE PIZZA NAPOLETANAGHA peels and small peels are recognised by the regulation of the Assocazione Verace Pizza Napoletana (AVPN - the real Naples pizza association)
> SMALL PEELS WITH SLIDING HIGHLY-rESISTANT INSULATION (see p. 10)GHA small peel: perforated hand with handle base and sliding interim grip in specific high-density polymer, highly-resistant to impacts and heat. It guarantees perfect insulation of the hands from heat and a specific fitting on the handle base can block the interim element and make it available up high when the small peel is rested head down.
> Golden Hard Anodising (GHA) treated aluminium head and handle
rectangular perforated
Peel for sliding pizza into the oven AV-...rF
• Head inches: 13", 15", 16", 18", 20" • Handle inches: 59", 70"
round perforated
Peel for sliding pizza into the oven AV-...F
• Head inches: 13", 15", 16", 18", 20" • Handle inches: 59", 70"
round perforated
Turn and take-out small peel IV-...F
• Head inches: 6½", 8", 9", 10" • Handle inches: 59", 70"
Other instruments in the same line• Triangular pizza slice/server (p. 38)• Oval pizza-server (p. 39)• Tray (p. 42)The spare handle end for the GHA small peel is marked with R-PA (also suitable for the small peels of the AZZURRA line) (p. 26)
THE LINE INCLUDES
1HIGH PERFORMANCE
INTO THE OVEN G H A - H Y G I E N I C A N D H A R D -W E A R I N G
13www.gimetalusa.com
INTO THE OVEN G H A - H Y G I E N I C A N D H A R D -W E A R I N G INTO THE OVEN C A r B O N - S O P H I S T I C AT E D A N D L I G H T
> A PEEL FOrEVErThe carbon fibre handle gives an unprecedented lightness, thermal insulation that drastically reduces heat transmission, mechanical resistance and resistance to chemical agents.The head is also well-resistant to wear and abrasion, thanks to the specific treatment applied to the aluminium alloy. The hard anodising oxidisation penetrates partly within the aluminium alloy and partly develops over the surface, transforming the original material. It does not constitute a coating of the material.The peel as a whole can be considered "wear-proof", making it an "eternal" peel.
> HArD-WEArING AND SECUrE: THE THrEE rIVETSThe head-handle joint consists of the overlay of two elements secured by three large rivets in line, to guarantee complete safety and no movement (see p. 9).
> PErFOrATIONThe peel head is completely perforated (see p. 9) with holes that have been specifically designed to ensure little friction and the release of flour, preventing it from sticking to the bottom of the pizza and risking to get burnt.
> ErGONOMIC The peel handles are in an oval tubular design to increase stability.
1HIGH PERFORMANCE
> Hard oxide anodised aluminium head and carbon fibre handle
rectangular perforated
Peel for sliding pizza into the ovenACB-...rF
• Head inches: 13", 15", 16", 18", 20" • Handle inches: 59"
round perforated
Peel for sliding pizza into the ovenACB-...F
• Head inches: 13", 15", 16", 18", 20" • Handle inches: 59"
THE LINE INCLUDES
14www.gimetalusa.com
2PROFESSIONAL
STANDARD
INTO THE OVEN A Z Z U r r A - P R A C T I C A L A N D F L E X I B L E
> COMPLETE LINEThe azzurra line comprises a complete range of assorted peels able to meet any demand or type of use:• different length handles• solid or perforated round or rectangular head, in aluminium or stainless steel, smooth or
relief to obtain easy sliding• shortened for tunnel ovens, strengthened for round pans, lengthened for pizza by the
metre
> STrONG AND LIGHTAll models of the azzurra line are lighter than classic models, yet extremely strong with oval tubular peel handles to make them more stable.
> PrACTICALITYLight, flexible aluminium heads to allow for a scraper effect with specific ribs to ensure seal.Neutral anodising that makes the surface even and protects it from oxidisation.Gentle, regular milled beveled edge to facilitate taking hold of the pizza.
> HArD-WEArING AND SECUrE: THE THrEE rIVETSThe head-handle joint consists of the overlay of two elements secured by three large rivets in line, to guarantee complete safety and no movement (see p. 9).The advantage of the riveted joints is the absence of vibrations transmitted to the handle, for a more comfortable use.
> PErFOrATION LOW FrICTION AND rEDUCED DUSTING FLOUrIn the perforated versions (see p. 9), the peel and small peel heads have holes throughout the surface, specifically designed to ensure low friction and to release flour, preventing it from attaching to the pizza bottom and risking to get burnt.
> Neutral anodised aluminium head, light blue anodised handle
rectangular solid
Peel for sliding pizza into the oven A-...r
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
• Head inches: 16", 18", 20" • Handle inches: 47", 59", 70"
round solid
Peel for sliding pizza into the oven A-...
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
• Head inches: 16", 18", 20" • Handle inches: 47", 59", 70"
rectangular perforated
Peel for sliding pizza into the oven A-...rF• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
• Head inches: 16", 18", 20" • Handle inches: 47", 59", 70"
round perforated
Peel for sliding pizza into the oven A-...F
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
• Head inches: 16", 18", 20" • Handle inches: 47", 59", 70"
rectangular solid
round pan peel A-...
• Head inches: 9"x10" • Handle inches: 20", 47", 59", 70"
round solid
Short peel A-...C
• Head inches: 13", 15", 16", 18", 20" • Handle inches: 12"
rectangular solid
Peel for pizza by the metre AM-...• Head inches: 12"x24", 12"x31", 16"x24",
16"x31"• Handle inches: 47"
THE LINE INCLUDES
15
THE LINE INCLUDES
> STAINLESS STEEL For those convinced that steel is the best material in terms of safety, strength and reduced heat transmission, the versions of the peel heads have been developed with special absolutely stainless steel with low Nickel content in respect of allergies often caused by this metal; 08/10 mm thick.
> EASY-SLIDING STAINLESS STEEL WITH NO HOLESFor those looking for easy-sliding in steel too, GI.METAL has applied a special treatment to the steel sheet (07/10 mm) that makes the rice-grain relief surface thereby reducing the quantity of surface area in contact between the peel and the dough, reducing friction and limiting the use of dusting flour, leaving the oven clean, reducing brushing frequency and the risk that any flour that may be stuck on the bottom should burn, giving the pizza a bitter flavor.
> SMALL PEELS WITH SLIDING HIGHLY-rESISTANT INSULATION (see p. 10)This solid small peel is ultra-light and available in versions with a solid head or fine, diffused holes to reduce the weight. It is built entirely from stainless steel, thereby avoiding the heat from the oven from being transmitted, whilst the handle base and interim sliding grip are in a specific high-density polymer with excellent impact- and heat-resistance. A specific fitting on the handle base can block the interim element and make it available up high when the small peel is rested head down.
> Steel head, light blue anodised handle
rectangular solid
Stainless steel peel I-...r
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
round solid
Stainless steel peel I-...
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
rectangular solid
Easy-slide peel IB-...r
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
round solid
Easy-slide peel IB-..
• Head inches: 13", 15" • Handle inches: 20", 47", 59", 70"
> Steel head, stainless steel handle
round solid
Turn and take-out small peel I-...
• Head inches: 17", 20", 23", 26" • Handle inches: 20", 47", 59", 70"
Tondo asolato
Turn and take-out small peel I-...F
• Head inches: 17", 20", 23", 26" • Handle inches: 20", 47", 59", 70"
replacement
replacement small peel r-PA
• Suitable for Azzurra and GHA small peels
• Handle base element + Sliding element• High density polymer
16
> LIGHTAll of the Amica line models are light to make them practical for occasional use.
> HArD-WEArING AND SECUrE: THE THrEE rIVETSThe head-handle joint consists of the overlay of two elements secured by three large rivets in line, to guarantee complete safety and no movement (see p. 9).
> ErGONOMICS The oval tubular handles (30x15 mm) ensure stability and prevent rotation.
> SIZESThe head sizes satisfy those looking for a tool to move standard pizzas (diameter of around 13 inches) both in small ovens (in the home) and in deeper ovens (handles from 23" inches to 59" inches).
> MATErIALSThe choice may fall to three different head materials: aluminium, aluminate, stainless steel. The latter is round, the others are rectangular.
> SMALL PEELS (see p. 10)This solid small peel is ultra-light with a solid head.It is built entirely from galvanized steel, in order to avoid the transmission of the heat from the oven, whilst the handle base and interim sliding grip are in a specific high-density polymer with excellent impact- and heat-resistance. A specific fitting on the handle base can block the interim element and make it available up high when the small peel is rested head down.
3MODERATE USE
> Untreated aluminium head, untreated aluminium handle
rectangular solid
Aluminium peel AE-...r
• Head inches: 12", 13" • Handle inches: 23½", 29½", 47", 59"
> Aluminate head, untreated, ribbed aluminium handle
rectangular solid
Aluminate peel F-...
• Head inches: 13" • Handle inches: 47", 59"
Other instruments in the same line• Adjustable brush with brass bristles (p. 31)• Scraper for recovering solid bodies (p. 32)• Ash-raising shovel (p. 32)• Wall-mounted peel-holder (p. 29)• PIZZA set (p. 45)• Treated iron andiron (p. 33)
> Aluminate head, galvanised handle
round solid
Turn and take-out small peel F-...
• Head inches: 8" • Handle inches: 47", 59"
Peels and small peels of the Amica line stand out for finishes and basic details with some of the renewed constructions and innovations that have made GI.METAL cutting-edge in the professional segment.
THE LINE INCLUDES
INTO THE OVEN A M I C A - S I M P L I F I E D
17www.gimetalusa.com
INTO THE OVEN A M I C A - S I M P L I F I E D
CARBON ACB-...F
18
13"
* L Q # $
72½ AG AG • 1.50 1 1 AV-32F 210.00
84 AG AG • 1.65 1 1 AV-32F/180 230.00
72 AD K • 1.30 1 1 ACB-32F 550.00
26 AA AA 0.96 Tunnel ovens 2 1 A-32C 62.00
33 AA AA 1.06 2 1 A-32/50 69.00
33 AA AA • 1.35 2 1 A-32F/50 86.00
33 SS AA 1.06 2 1 I-32/50 54.00
33 SS AA 1.47 2 1 IB-32/50 70.00
60 AA AA • 1.23 2 1 A-32F/120 91.00
60 AA AA 1.34 2 1 A-32/120 74.00
60 SS AA 1.87 Stainlesssteel 2 1 I-32/120 59.00
60 SS AA 1.76 Easy-sliding 2 1 IB-32/120 75.00
72 AA AA 1.62 2 1 A-32 79.00
72 AA AA • 1.72 2 1 A-32F 96.00
72 SS AA 2.14 Stainlesssteel 2 1 I-32 64.00
72 SS AA 2.03 Easy-sliding 2 1 IB-32 80.00
83½ AA AA 1.78 2 1 A-32/180 84.00
83½ AA AA • 1.67 2 1 A-32F/180 101.00
83½ SS AA 2.31 Stainlesssteel 2 1 I-32/180 68.00
83½ SS AA 2.20 Easy-sliding 2 1 IB-32/180 84.00
R O U N D P E E L STotal length inches Head material Handle Material
Perforated Net weight pound * Features
L Level of use Q Quantity forDistributors # Code
$ Retail price
GHA CARBON AZZURRA
AG GHA aluminium AA Anodised aluminium AD Hard oxide aluminium
K Carbon fibre SS Stainless steel
AZZURRA I-...
AZZURRA IB-...
19www.gimetalusa.com
14"
* L Q # $
74 AG AG • 1.63 1 1 AV-37F 230.00
86 AG AG • 1.78 1 1 AV-37F/180 250.00
74 AD K • 1.59 1 1 ACB-37F 570.00
28 AA AA 1.26 Tunnel ovens 2 1 A-37C 71.00
33 SS AA 1.83 2 1 IB-37/50 80.00
35 AA AA • 1.16 2 1 A-37F/50 95.00
35 SS AA 2.01 2 1 I-37/50 58.00
46 AA AA 1.35 2 1 A-37/50 79.00
60 SS AA 2.11 Easy-sliding 2 1 IB-37/120 85.00
62 AA AA • 1.45 2 1 A-37F/120 100.00
62 AA AA 1.64 2 1 A-37/120 84.00
62 SS AA 2.29 Stainless steel 2 1 I-37/120 63.00
74 AA AA 1.91 2 1 A-37 89.00
74 AA AA • 1.72 2 1 A-37F 105.00
74 SS AA 2.57 Stainless steel 2 1 I-37 68.00
74 SS AA 2.39 Easy-sliding 2 1 IB-37 90.00
85½ AA AA 2.08 2 1 A-37/180 94.00
85½ AA AA • 1.89 2 1 A-37F/180 110.00
85½ SS AA 2.73 Stainless steel 2 1 I-37/180 72.00
85½ SS AA 2.55 Easy-sliding 2 1 IB-37/180 94.00
16"
* L Q # $
76½ AG AG • 2.20 1 1 AV-41F 250.00
88 AG AG • 2.35 1 1 AV-41F/180 270.00
75 AD K • 2.38 1 1 ACB-41F 610.00
29½ AA AA 2.04 Tunnel ovens 2 1 A-41C 89.00
33 AA AA 1.35 2 1 A-41F/50 109.00
36 AA AA 2.14 2 1 A-41/50 89.00
63½ AA AA 2.42 2 1 A-41/120 94.00
63½ AA AA • 2.02 2 1 A-41F/120 114.00
75 AA AA 2.70 2 1 A-41 99.00
75 AA AA • 2.30 2 1 A-41F 119.00
87 AA AA 2.86 2 1 A-41/180 104.00
87 AA AA • 2.46 2 1 A-41F/180 124.00
AZZU
RRA A-...
F
AZZURRA A-...
GHA AV-...F
20
round p
eels
13"
* L Q # $
78 AG AG • 2.53 1 1 AV-45F 270.00
90 AG AG • 2.68 1 1 AV-45F/180 290.00
77 AD K • 2.89 1 1 ACB-45F 640.00
31 AA AA 2.31 Tunnel ovens 2 1 A-45C 92.00
33 AA AA • 1.35 2 1 A-45F/50 117.00
38 AA AA 2.52 2 1 A-45/50 102.00
65 AA AA 2.81 2 1 A-45/120 107.00
65 AA AA • 2.35 2 1 A-45F/120 122.00
77 AA AA 3.21 2 1 A-45 112.00
77 AA AA • 2.52 2 1 A-45F 127.00
88½ AA AA 3.13 2 1 A-45/180 117.00
88½ AA AA • 2.68 2 1 A-45F/180 132.00
20"
* L Q # $
81 AG AG • 2.83 1 1 AV-50F 290.00
92 AG AG • 2.98 1 1 AV-50F/180 310.00
79 AD K • 3.21 1 1 ACB-50F 670.00
33 AA AA • 1.35 2 1 A-50F/50 127.00
33 AA AA 2.87 Tunnel ovens 2 1 A-50C 96.00
40 AA AA 2.97 2 1 A-50/50 115.00
67 AA AA 3.25 2 1 A-50/120 120.00
67 AA AA • 2.58 2 1 A-50F/120 132.00
79 AA AA 3.53 2 1 A-50 125.00
79 AA AA • 2.85 2 1 A-50F 137.00
90½ AA AA 3.69 2 1 A-50/180 130.00
90½ AA AA • 3.01 2 1 A-50F/180 142.00
AMICA AE-...
AMICA F-...
21
11”x10”
L Q # $
35 AR AR 1.06 3 10 AE-29R/60 33.00
40½ AR AR 1.15 3 10 AE-29R/75 35.00
50 AR AR 1.28 3 10 AE-29R/100 37.00
58 AR AR 1.39 3 10 AE-29R/120 39.00
70 AR AR 1.56 3 10 AE-29R/150 41.00
R E C TA N G U L A R P E E L STotal length inches Head material Handle material
Perforated Net weight pound * Features
L Level of use Q Quantity forDistributors # Code
$ Retail price
GHA CARBON AZZURRA
AMICA
AG GHA aluminium AA Anodised aluminium AD Hard oxide aluminium
AR Untreated aluminium K Carbon fibre SS Stainless steel
SA Aluminated steel
www.gimetalusa.com
CARBON ACB-...RF
AZZURRA A-...R
22
rect
angula
r pee
ls
13”
* L Q # $
72½ AG AG • 1.60 1 1 AV-32RF 210.00
84 AG AG • 1.75 1 1 AV-32RF/180 230.00
72 AD K • 1.34 1 1 ACB-32RF 550.00
33 AA AA 1.16 2 1 A-32R/50 69.00
33 AA AA • 1.16 2 1 A-32RF/50 86.00
33 SS AA 1.71 2 1 I-32R/50 54.00
33 SS AA 1.51 2 1 IB-32R/50 70.00
60 AA AA 1.45 2 1 A-32R/120 74.00
60 AA AA • 1.29 2 1 A-32RF/120 91.00
60 SS AA 1.99 Stainless steel 2 1 I-32R/120 59.00
60 SS AA 1.80 Easy-sliding 2 1 IB-32R/120 75.00
72 AA AA 1.72 2 1 A-32R 79.00
72 AA AA • 1.54 2 1 A-32RF 96.00
72 SS AA 2.27 Stainless steel 2 1 I-32R 64.00
72 SS AA 2.07 Easy-sliding 2 1 IB-32R 80.00
83½ AA AA 1.89 2 1 A-32R/180 84.00
83½ AA AA • 1.73 2 1 A-32RF/180 101.00
83½ SS AA 2.43 Stainless steel 2 1 I-32R/180 68.00
83½ SS AA 2.24 Easy-sliding 2 1 IB-32R/180 84.00
36 AR AR 1.21 3 10 AE-32R/60 34.00
42 AR AR 1.29 3 10 AE-32R/75 36.00
51 AR AR 1.43 3 10 AE-32R/100 38.00
59 AR AR 1.54 3 10 AE-32R/120 40.00
59 SA AR 1.94 3 10 F-32R 31.00
71 AR AR 1.70 3 10 AE-32R/150 42.00
71 SA AR 2.10 3 10 F-32R/L 34.00
AZZURRA A-...RF
AZZURRA I-...
23www.gimetalusa.com
14”
* L Q # $
74 AG AG • 1.68 1 1 AV-37RF 230.00
86 AG AG • 1.84 1 1 AV-37RF/180 250.00
74 AD K • 1.65 1 1 ACB-37RF 570.00
35 AA AA 1.41 2 1 A-37R/50 79.00
35 AA AA • 1.41 2 1 A-37RF/50 95.00
35 SS AA 2.17 2 1 I-37R/50 58.00
35 SS AA 1.93 2 1 IB-37R/50 80.00
62 AA AA 1.69Flexiblebrush-effect
2 1 A-37R/120 84.00
62 AA AA • 1.52Flexiblebrush-effect
2 1 A-37RF/120 100.00
62 SS AA 2.46 Stainless steel 2 1 I-37R/120 63.00
62 SS AA 2.22 Easy-sliding 2 1 IB-37R/120 85.00
74 AA AA 1.97Flexiblebrush-effect
2 1 A-37R 89.00
74 AA AA • 1.80Flexiblebrush-effect
2 1 A-37RF 105.00
74 SS AA 2.73 Stainless steel 2 1 I-37R 68.00
74 SS AA 2.49 Easy-sliding 2 1 IB-37R 90.00
85 AA AA 2.13Flexiblebrush-effect
2 1 A-37R/180 94.00
85 AA AA • 1.96Flexiblebrush-effect
2 1 A-37RF/180 110.00
85 SS AA 2.90 Stainless steel 2 1 I-37R/180 72.00
85 SS AA 2.65 Easy-sliding 2 1 IB-37R/180 94.00
GHA AV-...RF
AZZURRA IB-...R
24
rect
angula
r pee
ls
16”
L Q # $
76 AG AG • 2.31 1 1 AV-41RF 250.00
88 AG AG • 2.46 1 1 AV-41RF/180 270.00
75 AD K • 2.42 1 1 ACB-41RF 610.00
36 AA AA 2.18 2 1 A-41R/50 89.00
53 AA AA • 2.18 2 1 A-41RF/50 109.00
63½ AA AA 2.47 2 1 A-41R/120 94.00
63½ AA AA • 2.13 2 1 A-41RF/120 114.00
75 AA AA 2.74 2 1 A-41R 99.00
75 AA AA • 2.41 2 1 A-41RF 119.00
87 AA AA 2.90 1 1 A-41R/180 104.00
87 AA AA • 2.57 1 1 A-41RF/180 124.00
18”
L Q # $
78 AG AG • 2.57 1 1 AV-45RF 270.00
90 AG AG • 2.73 1 1 AV-45RF/180 290.00
77 AD K • 2.97 1 1 ACB-45RF 640.00
38 AA AA 2.66 2 1 A-45R/50 99.00
38 AA AA • 2.66 2 1 A-45RF/50 117.00
65 AA AA 2.95 2 1 A-45R/120 104.00
65 AA AA • 2.60 2 1 A-45RF/120 122.00
77 AA AA 3.22 2 1 A-45R 109.00
77 AA AA • 2.75 2 1 A-45RF 127.00
88½ AA AA 3.38 2 1 A-45R/180 114.00
88½ AA AA • 2.91 2 1 A-45RF/180 132.00
20”
L Q # $
81 AG AG • 2.96 1 1 AV-50RF 290.00
92½ AG AG • 3.11 1 1 AV-50RF/180 310.00
79 AD K • 3.28 1 1 ACB-50RF 670.00
40 AA AA 3.17 2 1 A-50R/50 115.00
40 AA AA • 3.17 2 1 A-50RF/50 127.00
67 AA AA 3.45 2 1 A-50R/120 120.00
67 AA AA • 2.82 2 1 A-50RF/120 132.00
79 AA AA 3.73 2 1 A-50R 125.00
79 AA AA • 3.10 2 1 A-50RF 137.00
90½ AA AA 3.89 2 1 A-50R/180 130.00
90½ AA AA • 3.26 2 1 A-50RF/180 142.00
AZZURRA AM-...
25
PEELS FOR PIZZA BY THE METRETotal length inches Head material Handle material
Perforated Net weight pound L Level of use
Q Quantity forDistributors # Code $ Retail price
AZZURRA
AA Anodised aluminum
12”x24”
L Q # $
75 AA AA 3.19 2 1 AM-3060 180.00
12”x31½”
L Q # $
83 AA AA 3.69 2 1 AM-3080 190.00
16”x24”
L Q # $
75 AA AA 3.76 2 1 AM-4060 190.00
16x31½”
L Q # $
83 AA AA 4.82 2 1 AM-4080 200.00
www.gimetalusa.com
GHA IV-...F
AZZURRA R-PA
26
S M A L L P E E L STotal length inches Head material Handle material
Perforated Net weight pound L Level of use
Q Quantity forDistributors # Code $ Retail price
GHA AZZURRA AMICA
AG GHA aluminium SS Stainless steel SA Aluminated steel
SG Galvanized Steel PH Highly-resistant polymer
6½"
L Q # $
65½ AG AG • 1.03 1 1 IV-17F 155.00
77 AG AG • 1.17 1 1 IV-17F/180 165.00
53½ SS SS 1.36 2 1 I-17/120 52.00
53½ SS SS • 1.34 2 1 I-17F/120 60.00
65 SS SS 1.72 2 1 I-17 57.00
65 SS SS • 1.69 2 1 I-17F 65.00
77 SS SS 1.92 2 1 I-17/180 62.00
77 SS SS • 1.91 2 1 I-17F/180 70.00
8"
L Q # $
67 AG AG • 1.10 1 1 IV-20F 170.00
78 AG AG • 1.23 1 1 IV-20F/180 180.00
54½ SS SS 1.51 2 1 I-20/120 58.00
54½ SS SS • 1.47 2 1 I-20F/120 65.00
66 SS SS 1.86 2 1 I-20 63.00
66 SS SS • 1.83 2 1 I-20F 70.00
78 SS SS 2.07 2 1 I-20/180 68.00
78 SS SS • 2.04 2 1 I-20F/180 75.00
54 SA SS 1.67 3 10 F-20 27.00
66 SA SG 1.97 3 10 F-20/L 29.50
Spare parts
L Q # $
PH 2.20 2 1 R-PA 7.00
AZZURRA I-...
AMICA F-...
AZZURRA I-...F
27www.gimetalusa.com
9"
L Q # $
68 AG AG • 1.21 1 1 IV-23F 185.00
79½ AG AG • 1.34 1 1 IV-23F/180 195.00
56 SS SS 1.71 2 1 I-23/120 63.00
56 SS SS • 1.65 2 1 I-23F/120 69.00
67 SS SS 2.06 2 1 I-23 68.00
67 SS SS • 2.01 2 1 I-23F 71.00
79 SS SS 2.27 2 1 I-23/180 73.00
79 SS SS • 2.22 2 1 I-23F/180 76.00
10"
L Q # $
69 AG AG • 1.32 1 1 IV-26F 205.00
81 AG AG • 1.45 1 1 IV-26F/180 215.00
57 SS SS 1.81 2 1 I-26/120 67.00
57 SS SS • 1.74 2 1 I-26F/120 74.00
69 SS SS 2.16 2 1 I-26 72.00
69 SS SS • 2.10 2 1 I-26F 79.00
80 SS SS 2.38 2 1 I-26/180 81.00
80 SS SS • 2.31 2 1 I-26F/180 84.00
AC-APT...
AC-BS...
28
T O O L S - H O L D E RDimension inches Material Capacity pieces
Net weight pound * Features Q Quantity forDistributors
# Code $ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
A Aluminium SS Stainless steel SM Stainless steelMarble base
Accessories not included
Free-standing peel rack
* L Q # $
10x14x69 SM 8 19.80 h 59" double front 1 1 AC-BS 259.00
10x14x69 SM 4 18.92 h 59" single front 1 1 AC-BS/1 215.00
Peel rack
* L Q # $
12x6x16 SS 1 5.60 Small peels max. 26 inches 1 1 AC-APT26 109.00
16x6x16 SS 1 6.84 Peels max. 36 inches 1 1 AC-APT36 119.00
21x6x16 SS 1 7.88 Peels max. 50 inches 1 1 AC-APT50 129.00
COUNTEr-TOP, WALL-MOUNTED, FrEE-STANDING, FLOOr-STANDING
> Practical, easily-accessible, order, comfort, speed
www.gimetalusa.com
AC-APL
AC-APM
ACH-PP
AC-OM
AC-PAC
29
Wall-mounted peel rack
* L Q # $
12x6x5 A 2 0.66 Wall-mounted for small peel 2 1 AC-APL 40.00
7x4x4 A 2 0.26 Wall-mounted for peel 2 1 AC-APM 24.00
Dowels not included
AMICA peel rack
* L Q # $
16x3 A 3 0.58Wall-mounted,
3 places (peel, smallpeel, brush)
3 10 ACH-PP 15.50
Naples-style peel handle support
* L Q # $
8x8x41 SS 1 9.46 For Naples-style peel 1 1 AC-OM 120.00
Counter-top accessory-holder
* L Q # $
13x6x9½ A 9 1.72Counter-toptools always
in order1 1 AC-PAC 79.00
AC-SP...
AC-SP2...
AC-SPN...
AC-SPT...
30
T O B R U S HTotal length inches Bristle material Handle material
With Scraper Net weight pound * Features
Q Quantity forDistributors # Code $ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
A Aluminium AA Anodised aluminium S Steel
B Brass NF Natural fibre PH Highly-resistant polymer
PS Standard plastic
Brass bristles
* L Q # $
51" 8x2.5 B AA • 1.84 Adjust. 1 1 AC-SP/120 63.00
63” 8x2.5 B AA • 1.65 Adjust. 1 1 AC-SP 68.00
74½” 8x2.5 B AA • 1.81 Adjust. 1 1 AC-SP/180 73.00
52” 10.5x3 B AA • 1.69 Adjust. 1 1 AC-SP2/120 76.00
64” 10.5x3 B AA • 2.08 Adjust. 1 1 AC-SP2 83.00
76” 10.5x3 B AA • 2.24 Adjust. 1 1 AC-SP2/180 86.00
Natural bristles
* L Q # $
51” 8x2.5 NF AA • 1.65 Adjust. 1 1 AC-SPN/120 58.00
64” 8x2.5 NF AA • 1.43 Adjust. 1 1 AC-SPN 63.00
74½” 8x2.5 NF AA • 1.59 Adjust. 1 1 AC-SPN/180 68.00
Round
* L Q # $
50½” 5.5x3 B AA • 2.53 Wood oven 1 1 AC-SPT/120 75.00
62” 5.5x3 B AA • 2.79 Wood oven 1 1 AC-SPT 80.00
74” 5.5x3 B AA • 2.97 Wood oven 1 1 AC-SPT/180 85.00
SCrAPE, BrUSH AND CLEAN IN COMPLETE SAFETY
> GI.METAL brushes enable quick, effective cleaning of refractory stone from food residues, the flour left by the pizza in the oven (unless perforated GHA peels are used, which do not require it) and ash.
> The variety of lengths available mean that all areas of all ovens can be reached. The adjustable brushes increase the practicality and efficiency of cleaning.
> The brass bristles are more efficient and invasive; the natural ones are more delicate for continuous cleaning with complete peace-of-mind.
> The scraper can remove any residues that have burnt onto the stone.
R-SPG
R-SPN
R-SPT
R-SP
R-SP2
AC-SPG
AC-SPGT
ACH-SP
31
AMICA brass aluminium
* L Q # $
50” 6.5x2 B A 1.14 Straight,adjustable 3 10 ACH-SP 46.00
62” 6.5x2 B A 1.30 Straight,adjustable 3 10 ACH-SP/L 48.00
Grill brush
L Q # $
6x1.5 S PH 0.64 1 1 AC-SPG 39.00
6x2 S PS 0.52 1 1 AC-SPGT 9.00
Replacement
* L Q # $
8x2.5 B 0.82For
AC-SP 1 1 R-SP 28.00
10.5x3 B 1.25For
AC-SP2 1 1 R-SP2 40.00
6x1.5 S 0.26For
AC-SPG 1 1 R-SPG 18.00
8x2.5 NF 0.60For
AC-SPN 1 1 R-SPN 23.00
5.5x3 B 1.47For
AC-SPT 1 1 R-SPT 30.00
www.gimetalusa.com
AC-PL...
ACH-RS...
AC-RS...
ACH-PL...
32
O N T H E F I R ETotal length inches Material Handle material
Net weight pound Q Quantity forDistributors # Code
$ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
AR Untreated aluminium AN Black anodised
aluminium SS Stainless steel
SA Aluminated steel SG Galvanised steel SR Untreated steel
Scraper to recover solid bodies
L Q # $
49” 9.50x4* SS AN 0.92 1 1 AC-RS/120 46.00
60” 9.50x4* SS AN 1.08 1 1 AC-RS 51.00
72” 9.50x4* SS AN 1.25 1 1 AC-RS/180 56.00
*Usable head dimensions
Ash-raising shovel
L Q # $
65” 8x12* SS AN 1.54 1 1 AC-PL/120 54.00
67½” 8x12* SS AN 1.75 1 1 AC-PL 59.00
79” 8x12* SS AN 1.91 1 1 AC-PL/180 64.00
*Usable head dimensions
Amica ash-raising shovel
L Q # $
55½” 8x12* SA AR 0.734 3 10 ACH-PL 33.50
67½” 8x12* SA AR 0.812 3 10 ACH-PL/L 35.50
*Usable head dimensions
Amica scraper to recover solid bodies
L Q # $
48” 9.50x4* SA AR 0.96 3 10 ACH-RS 26.50
60” 9.50x4* SA AR 1.10 3 10 ACH-RS/L 29.50
*Usable head dimensions
TOOLS FOr A WOOD OVEN
> The wood oven requires accessories dedicated to care for the wood, the embers and the ash.
AC-AL
AC-BA
ACH-AL1
AC-SB
AC-TB
33
Tubular ember-mover
L Q # $
70½” 3x12* SG SG 2.42 3 10 ACH-SB 51.00
70½” 3x12* SS SS 2.42 1 1 AC-SB 49.00
*Usable head dimensions
Tubular ember-spreader
L Q # $
60” 2x1.5* SG SG 1.91 3 10 ACH-TB 39.00
60” 2x1.5* SS SS 1.91 1 1 AC-TB 51.00
*Usable head dimensions
Andiron
L Q # $
11x6.5x3.5 SR 1.43 3 6 ACH-AL1 19.00
11.5x8x19 SR 10.59 1 2 AC-AL 62.00
Ember containment barrier
L Q # $
45x4 SR 15.40 1 1 AC-BA 68.00
www.gimetalusa.com
DF...
34
D U R I N G C O O K I N GTotal length inches Material Handle material
Net weight pound * Features n° No. piecesin package
Q Quantity forDistributors # Code $ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
AR Untreated aluminium SH Chrome-plated steel SS Stainless steel
PH Highly-resistant polymer
Screens
* n° L Q # $
8" AR 0.17 Flat 12 1 12 DF20 4.50
8½" AR 0.21 Flat 12 1 12 DF22 4.90
9" AR 0.24 Flat 12 1 12 DF24 5.60
10" AR 0.26 Flat 12 1 12 DF26 5.60
11" AR 0.31 Flat 12 1 12 DF28 6.00
12" AR 0.33 Flat 12 1 12 DF30 6.90
12" AR 0.40 Flat 12 1 12 DF33 7.30
15" AR 0.43 Flat 12 1 12 DF36 8.10
16" AR 0.53 Flat 12 1 12 DF40 9.00
18" AR 0.59 Flat 12 1 12 DF45 9.90
20" AR 0.79 Flat 12 1 12 DF50 10.90
22" AR 0.86 Flat 12 1 12 DF55 20.90
24" AR 0.95 Flat 12 1 12 DF60 29.00
Seamless, crushed mesh to prevent the pizza from sticking
SCrEENS (and screen-holders), GrIPPErS
> Screens are useful tools to cook or warm pizza avoiding direct contact of the dough with the radiating oven surface (useful when the refractory stone is too hot or different doughs need to be cooked requiring different temperatures, in the same oven).
> Gourmet pizzas using combined cooking (partial or total disc cooking followed by the arrangement of the topping and dressings for new, definitive cooking) need this tool.
> Screens may also be used as an alternative for cooking in the pan: with respect to the latter it gives a more direct radiation of the heat for quicker cooking.
AC-PRO
AC-PRV
AC-PZP2
AC-PZE...
35www.gimetalusa.com
Screen Racks
* n° L Q # $
12x12x25 SH 5.72 15 screens up to 15” vertically 2 1 2 AC-PRO 69.00
13x16x25 SH 8.5110 screens from
16” to 20” vertically
2 1 2 AC-PRO2 84.00
14x8.5x10 SH 2.31Container for 96
screens horizontally
2 1 2 AC-PRV 40.00
Pan Grippers
* L Q # $
3½”x9½” SS PH 0.61 Adjust. height+notches 1 1 AC-PZP2 39.00
16x1x2 SS SS 0.71Adjust. height+
notch 11,8" handle
2 1 AC-PZE 19.00
27.5x1x2 SS SS 1.14Adjust. height+
notch 23,6" handle
2 1 AC-PZE/L 23.00
AC-STP32
AC-STP31
AC-ST4M
AC-ST
AC-TP
AC-TPM
CASS6040...
36
T O P R E P A R ETotal length inches Material Handle material
Capacity Net weight pound Artisan construction
* Features Q Quantity forDistributors # Code
$ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
A Aluminium SS Stainless steel CB Copper and Brass
PE Polyethylene PH Highly-resistant polymer PS Standard plastic
Dough-cutters
* L Q # $
5x6 PH PH 0.31Impact-resistant
and scratch-resistant
1 1 AC-TP 12.00
6x4.5 SS PS 0.44 2 1 AC-TPM 8.00
Dough Boxes
* L Q # $
24x16 PE 1.52 Lid, polyethylene for food use 1 1 CASS6040CP 21.00
24x16x3 PE 1.98 Polyethylene for food use 1 1 CASS604007 25.00
24x16x4 PE 2.86 Polyethylene for food use 1 1 CASS604010 36.00
24x16x5 PE 3.43 Polyethylene for food use 1 1 CASS604013 37.00
Dough Balls Spatulas
* L Q # $
4x3.5 SS PH 0.29 Flexible triangular 1 1 AC-STP31 21.00
4.5x4 SS PH 0.31 Flexible triangular 1 1 AC-STP32 24.00
4x3.5 SS PS 0.31 Triangular 2 1 AC-ST4M 8.50
3.5x9.5 PH PH 0.18Impact-resistant
and scratch-resistant
1 1 AC-ST 9.50
Usable blade dimensions
DOUGH-CUTTErS, SCrAPErS, CASES, TAB GrABS, rOLLING PINS, LADLE, OIL CANS> Assortment of tools needed to prepare the pizza
AC-BSM
MTI...
AC-MS90
MT...
OL05
OL10I
37
Oil Crut
L Q # $
1 p CB 0.17 • 1 1 OL05 66.00
2 p CB 0.21 • 1 1 OL10 79.00
3 p CB 0.24 • 1 1 OL15 85.00
1.5 p SS 0.57 2 1 OL10I 25.00
Ladle
L Q # $
3.5x14 0.40 SS 0.40 2 1 AC-MS90 32.00
Flat design to easily spread tomato sauce
Rolling pin
L Q # $
1x10 SS 0.41 2 1 MTI25 8.00
1x12 SS 0.51 2 1 MTI30 9.00
1x13 SS 0.53 2 1 MTI33 10.00
1.5x16 PE 0.84 2 1 MT34 17.00
2x19.5 PE 1.69 2 1 MT50 59.00
Tab grab
* L Q # $
18 A 0.84 Spherical tab grab 2 1 PCM46 18.00
36 A 1.69 Spherical tab grab 2 1 PCM92 29.00
Roller docker
* L Q # $
5x2 SS SS 1.32 Stainless steel tips 2 1 AC-BSM 34.00
www.gimetalusa.com
AC-ST2MAC-STP22
AC-STP20
AC-STP21
AV-ST15FAV-ST16F
AC-STP15F
AC-STP16F
AC-STP10
AC-STP11
38
P I Z Z A - S E R V E R STotal length inches Material Handle material
Replaceable handle Perforated Net weight pound
* Features Q Quantity forDistributors # Code
$ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
AG GHA aluminium AA Anodised aluminium SS Stainless steel
PH Highly-resistant polymer PS Standard plastic
Triangular pizza-server
L Q # $
5x6 AG PH • • 0.37 1 1 AV-ST15F 50.00
5.5x7 AG PH • • 0.41 1 1 AV-ST16F 42.00
5.5x7 SS PH • 0.52 1 1 AC-STP15F 28.00
5x6 SS PH • 0.43 1 1 AC-STP16F 25.00
5.5x7 SS PH 0.66 1 1 AC-STP10 20.00
4.5x6 SS PH 0.51 1 1 AC-STP11 18.00
Rectangular pizza-server
* L Q # $
3.5x4 SS PH 0.33 Flexible 1 1 AC-STP20 23.00
4x5 SS PH 0.37 Flexible 1 1 AC-STP21 26.00
3.5x9.5 SS PH 0.48 Flexible 1 1 AC-STP22 32.00
3x4.5 SS PS 0.42 Rigid 1 1 AC-ST2M 10.00
PrACTICAL, IMPACT- AND HEAT-rESISTANT
> Various size and various different material pizza-servers to take the balls out of the cases, to replace slices of pizza and/or rolls and other items to re-heat in the oven
www.gimetalusa.com
PPP3
0
AV-ST81F
AC-STP81F
AC-STP71
39
Oval pizza-server
L Q # $
7x8 AG PH • • 0.51 1 1 AV-ST81F 69.00
7x8 SS PH • 0.95 1 1 AC-STP81F 38.00
7x8 SS PH 0.90 1 1 AC-STP71 25.00
Pizza-server for rolls
* L Q # $
11.5x25 AA SS 1.78 For rolls 2 1 PPP30 50.00
AC-ROP3
AC-RO2
AC-ROM2
AC-ROM
AC-ROP5
AC-ROP4
40
T O C U TTotal length inches Material Handle material
Net weight pound * Features Q Quantity forDistributors
# Code $ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
SS Stainless steel PH Highly-resistant polymer PS Standard plastic
Pizza Cutters
* L Q # $
4” 26x4 SS PH 0.42
Tempered stainless steel blade, can be
dismantled and sharpened
1 1 AC-ROP3 48.00
4” 9x4 SS PS 0.37
Tempered stainless steel blade, can be
dismantled and sharpened
2 1 AC-RO2 28.00
4” 9x4 SS PS 0.37 Blade that canbe dismantled 2 1 AC-ROM 8.00
2” 7.5x2.3 SS PS 0.12 Pressurecutter 3 20 AC-ROM2 3.90
Pre-cutter
* L Q # $
4” 10x4 SS PH 0.421 "incision"
blade, can be sharpened
1 1 AC-ROP5 48.00
How to use: the segmented blade means that the slice can be cut without completely separating it, meaning that the pizza stays completely compact during transport. Once at home, the customer can finish separating the slices by hand.
"Cut/Carve" cutter
* L Q # $
4” 10x6 SS PH 0.57 2 blades, canbe sharpened 1 1 AC-ROP4 64.00
CUTTErS: CUTTING, PrE-CUTTING, DOUBLE-WHEELED (CUT AND CArVE), MINCING KNIFE, rOCKEr CUTTEr> Everything you need to cut pizza into slices or pieces and to press
pre-cutting lines
AC-MZP
R-RO
AC-TRP
41www.gimetalusa.com
Mincing knife
* L Q # $
8x5 SS PH 0.26Tempered stainless steel blade, can be
sharpened2 1 AC-TRP 36.00
Ideal for cutting pizza in the pan
Rocker cutter
* L Q # $
20.5x10 SS PH 1.32Pizzas max. 20" cm, adjustable rocking
movement1 1 AC-MZP 99.00
How to use: traditional or with a single screw for the handle in the centre. In this second case, the blade can rock, enabling simple, natural movements.
Spare parts
* L Q # $
4” SS 0.12 Spare blade, can be sharpened 1 1 R-RO 24.00
AV-CPT...
AC-PCP...
AC-P
CPT4
5/6
AC-P
CPT5
0/6 AC-
PCPT
45
AC-P
CPT5
0
42
T O S E R V ETotal length inches Handle material Net weight pound
* Features Q Quantity forDistributors # Code
$ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
AG GHA aluminium AR Untreated aluminium AA Anodised aluminium
PH Highly-resistant polymer IA Integrated aluminum
Tray with handle
* L Q # $
18” AG PH 1.76 8 slices 1 1 AV-CPT45 190.00
18” AG PH 1.76 6 slices 1 1 AV-CPT45/6 190.00
19” AG PH 2.11 8 slices 1 1 AV-CPT50 220.00
19” AG PH 2.11 6 slices 1 1 AV-CPT50/6 220.00
12” AR PH 0.95 Smooth 1 1 AC-PCP32 48.00
14” AR PH 1.19 Smooth 1 1 AC-PCP37 53.00
16” AR PH 1.41 Smooth 1 1 AC-PCP41 57.00
18” AR PH 1.65 Smooth 1 1 AC-PCP45 60.00
19” AR PH 2.57 Smooth 1 1 AC-PCP50 64.00
18” AR PH 1.65 8 slices 1 1 AC-PCPT45 64.00
18” AR PH 1.65 6 slices 1 1 AC-PCPT45/6 64.00
19” AR PH 2.57 8 slices 1 1 AC-PCPT50 68.00
19” AR PH 2.57 6 slices 1 1 AC-PCPT50/6 68.00
TrAYS, BrACKETS> Trays. To serve at the table as an alternative to the plate or as
a resting base for large pizzas. The sliced versions have small channels that facilitate and speed up portioning and slicing of the pizza.
> Brackets. These enable a more orderly serving of gourmet pizzas (central pizza with slice served individually onto a personal plate) at the table, or the serving of "finger" pizzas, to be consumed without the use of cutlery. The height of the bracket leaves room between the table and the tray where you can even place your canned drinks and cups.
www.gimetalusa.com
AC-CPMP...
AC-CPMP45/6
AC-CPMP50/8
VP...
WT...
AC-A
LZ
ACE-
ALZ
43
Tray with built-in handles
* L Q # $
12” AR IA 0.75Smooth,
2 handles,stackable
2 1 AC-CPMP32 16.00
14” AR IA 0.95Smooth,
2 handles,stackable
2 1 AC-CPMP36 19.00
14” AR IA 0.958 slices,
2 handles,stackable
2 1 AC-CPMP36/8 25.00
16” AR IA 1.21Smooth,
2 handles,stackable
2 1 AC-CPMP41 27.00
18” AR IA 1.45Smooth,
2 handles,stackable
2 1 AC-CPMP45 28.00
18” AR IA 1.456 slices,
2 handles,stackable
2 1 AC-CPMP45/6 35.00
19” AR IA 1.78Smooth,
2 handles,stackable
2 1 AC-CPMP50 32.00
19” AR IA 1.788 slices,
2 handles,stackable
2 1 AC-CPMP50/8 40.00
Tray with edge
* L Q # $
16” AR 1.09 Edge and feet to slow cooling 2 6 VP40 17.00
18” AR 1.32 Edge and feet to slow cooling 2 6 VP45 21.00
19” AR 1.96 Edge and feet to slow cooling 2 6 VP50 29.00
18” AR 1.25 Raised edge to slow cooling 2 2 WT45 25.00
19” AR 1.50 Raised edge to slow cooling 2 2 WT50 30.00
Bracket
* L Q # $
8 AA 1.12 Anodised aluminiumbracket sized for can/cup 1 1 AC-ALZ 39.00
5 AR 0.92 Non-anodised aluminium bracket sized for can/cup 2 1 ACE-ALZ 22.00
44
P I Z Z A S E Tn° No. pieces in package Net weight pound * Features
Q Quantity forDistributors # Code $ Retail price
L Level of use 1 | High Performance 2 | Professional Standard 3 | Moderate Use
Set PRO32 - PRO37 - AZZURRA
n° * L Q # $
7 6.40A-32R+I-20+AC-SP+AC-APM+AC-ROP3+ AC-STP31+AC-MS90
1 1 PRO32 299.00
7 6.64A-37R+I-20+AC-SP+AC-APM+AC-ROP3+ AC-STP31+AC-MS90
1 1 PRO37 310.00
Set PRO32F - PRO37F - AZZURRA - perforated
n° * L Q # $
7 6.31A-32RF+I-20F+AC-SP+
AC-APM+AC-ROP3+ AC-STP31+AC-MS90
1 1 PRO32F 323.00
7 6.56A-37RF+I-20F+AC-SP+
AC-APM+AC-ROP3+ AC-STP31+AC-MS90
1 1 PRO37F 331.00
> Collections of articles collected to be in line with different user profiles: 1 | high-performance for innovative, demanding users 2 | professional standard for traditional professionals 3 | moderate use for occasional users
45
Set 2 - AMICA - Aluminate peel
n° * L Q # $
4 4.40 ACH-PP+F-32R+F-20+ACH-SP 3 1 SET2 109.00
Set BASIC 1 - AMICA - Aluminium peel 29x27
n° * L Q # $
7 6.38AE-29R+AC-ROM+
AC-ST2M+AC-ST4M+ AC-TPM+OL10I+VP40
3 1 BASIC1 104.00
Set BASIC 2 - AMICA - Aluminium peel 32x3029x27
n° * L Q # $
10 9.72AE-32R+F-20+ACH-SP+
ACH-PP+AC-ROM+AC-ST2M+AC-ST4M+ AC-TPM+OL10I+VP40
3 1 BASIC2 185.00
www.gimetalusa.com
46
E X T R ATotal length inches Capacity pieces Net weight pound
* Features Q Quantity forDistributors # Code
$ Retail price
Accessories not included
Display unit for small items
* Q # $14.5x14.5
x55 100 35.20 Counter-top displayunit for small items 1 ES2 110.00
rETAILErS> Sales point display units.
47www.gimetalusa.com
Wall-mounted display unit
* Q # $
39x23x106 103Large wall-mounted
display unit forsales points
1 ES1 480.00
2013 DISPLAY UNIT capacity of 54 peels/small peels with direct access
> Innovative solution where peels, small peels and brushes are hung on hooks arranged in three arranged lines that make each article independent. Makes it possible to take hold of the chosen article, without moving the other equipment. Allows for the shared display of peels and other small items.
48
ITALIAN FACTOrY
GI.METAL srlVia Popolesco, 58 - 59013 Montemurlo (Prato) ItalyPhone (+39) 0574 791641 - Fax (+39) 0574 682902www.gimetal.it [email protected]
G I . M E TA L G R O U P
USA BrANCH
GI.METAL USA INC203 Commercial Drive - 60560 Yorkville, ILToll Free (800) 952-8350 - P) (630) 553-9134F) (630) 553-9135www.gimetalusa.com e-mail: [email protected]
BrAZIL BrANCH
GI.METAL Brasil Importação e Comércio Ltda.Rua Jandaia do Sul, 110 Pinhais 83.324-440, PR - Tel/Fax 41 3059 1991www.gimetal.com.br [email protected]
49
VISIT OUR SITE
www.gimetalusa.com
Visit our video channel at the following link: www.youtube.com/user/gimetalusa
FACTS THAT MAKE GI .METAL THE WORLDS BEST PEELS!
WHY USE PERFORATEDPIZZA PEELS?
The perforated peel is designed to remove the excess flour before sliding the pizza into the oven. Your oven remains cleaner and your pizza doesn't have a bitter taste.
ARE ALUMINIUM PEELS BETTER THAN WOODEN ONES?
Aluminium peels have a smooth surface that allows the pizza to be lifted from the prep table and slide into the oven. Aluminium peels are stronger, more flexible and last much longer as they do not dry out like wood. The engineered pattern of the head and the 3 rivets keeping it fixed are guaranteed to last longer!
HOW LONG DOES AN ALUMINIUM PEEL LAST?
Our customers tell us that the GI.METAL Azzurra aluminium peels have an average life 18 to 24 months. A minimum amount of care is required!
THE HANDLE IS TOO LONG. CAN I CUT IT?
No problem to cut the handle to shorten the length! Using a small metal (hack) saw to cut the handle to the required length. The black cap at the end of the handle can then be replaced.
I PREPARE AND TOSS THE PIZZA ON THE WOODEN PEEL AND THEN I SLIDE IT INTO THE OVEN. SHALL I DO THE SAME WITH METAL PIZZA PEELS?
The best method to make a Great pizza is to prepare it on the prep table and then to lift it up by using the peel and slide it into the oven. This allows you to make several pizzas at the same time making your work easier and faster.Demo is available on: www.gimetalusa.com
I USUALLY PUT MY WOODEN PEEL ON TOP OF THE OVEN. IS THE METAL ONE GOING TO GET HOT?
If your oven is well insulated (this also avoids wasted energy), there are no problems with your metal peel. If the outside of your oven is very hot, the peel gets very warm if put on top of the oven. In our line there are a variety of peel holders such as AC-BSM or AC-CPM and AC-APL.
WHAT IS THE SMALL PEEL FOR? To assist with equal baking of your pizza, you must spin it while it's in the oven.The small peels (l-xx series) are exactly what you need. You may use the same small peel to remove the pizza from the oven once it is baked. The small size of the peel compared to the size of the pizza is not a problem. Once the pizza is baked it becomes rigid and you can easily use the small peel as the tool to remove your pizza from the oven.
ARE THE RIVETS STRONG ENOUGH? WHAT IS THE MATERIAL?
The rivets are made of aluminium with a plastic shell. They will not loosen with use of the peel.
WHAT THE MAXIMUM TEMPERATURE THE PLASTIC HANDLES CAN STAND?
400°F is the maximum temperature the handles can resist. They CAN NOT be put into the oven! They will melt! There is not a problem keeping the tools with plastic handles on top of the oven.
WARRANTYAll merchandise is 100% guaranteed. Report any manufacturing defect within 10 days receive full credit or replacement. Guarantee is void if cleaning instructions or proper use is not followed.
RETURNED GOODSNo returned merchandise can be accepted without prior written agreement. If permission is granted, merchandise must be prepaid only and will be subject to minimum 20% restocking fee plus outbound freight. Returned goods must be received within 30 days of purchase.All returned goods must be new. Used, washed, stickered, abused or otherwise damaged merchandise will not be accepted.
BAD CHECKSA $25.00 collection fee and a 1.5% monthly rate will be added to past due accounts.
SHIPPING INFORMATIONProducts are shipped via Fedex ground. A shipping cost will be given at time of order.Alaska, Canada, Hawaii and Puerto Rico will be responsible for any tax, duty or brokerage fees.
TERMS AND SHIPPING INFORMATION
GI.METAL USA INC203 Commercial Drive - 60560 Yorkville, ILToll Free (800) 952-8350 • P) (630) 553-9134 • F) (630) 553-9135
www.gimetalusa.com • e-mail: [email protected]
MADE IN ITALY
Metal is the right choice. Aluminum is lighter and longer lasting than
wooden peels. Introducing the ultimate perforated pizza
peel to easily sift away excess flour. Tailored to your preferred length,
shape and functionality. 100% made in Italy and
available in America, close to you with the service
you need.
GI.M
ETA
L U
SA
, IN
C P
hone
(630
) 553
913
4 -
ww
w. g
imet
alus
a.co
m i
nfo@
gim
etal
usa.
com
Prof
essi
onal
tool
s fo
r pizz
eria
s
& re
stau
rant
s, s
ince
198
6.
Be Smart. Wood is over.
GI.METAL USA INC203 Commercial Drive - 60560 Yorkville, ILToll Free (800) 952-8350 • P) (630) 553-9134 • F) (630) 553-9135
www.gimetalusa.com • e-mail: [email protected] 1986
pallin
o.it
Idea
to d
a: V
ivi-f
erm
enti
d’im
pres
a