Getting Started With Your Handheld Whiteboard And Power Presenter

Getting Started with Your Interactive Tablet and

Power Presenter RE II

Contentnea-Savannah SchoolDeveloped by: W. Coffield, Technology Facilitator

Tablet Features

Image source: http://www.qomo.com/ckfinder/userfiles/files/QIT30%20Literature.pdf

LCD PanelPower on: Press and hold the power button for 3 seconds, this icon will display in the LCD panel.

Active: Tablet will go into power-saving mode whenpen is off of the active area for 3 seconds, at this time the active icon will not be visible on LCD

Battery Indicator: There are four levels to the battery indicator

Connecting: After you bind the tablet and dongle successfully, this icon is being displayed on the LCD. Indicates your Tablet has connected to PC successfully

Volume adjustment indicator : you can use the pen on the volume adjustment circle, (with your pen circle the inner circle to adjust the volume)

Token right: Indicates that your tablet is authorized by the receiver dongle

The interaction between pen and tablet:

Tablet number: Once the dongle and the tablet are binding on each other, Tablet number will be showed as “001” on the Display.

Image source and information: http://www.qomo.com/ckfinder/userfiles/files/QOMO%20QIT30%20Quick%20Guide%2082-902W01130-000v2%5B1%5D.0.pdf

Syncing your tablet with your computer

• To sync your tablet with your computer:– Make sure the appropriate software and drivers have

been installed– Insert the receiver dongle into an open USB port.

(This device is similar to a USB flash drive)– To begin syncing your tablet (at the same time)

press the “red” button located on the center back side of the tablet AND the LED light (should be blue in color) for about 3-5 seconds. Your LED panel should then display the items noted on the previous slide.

• Remember: Charge your tablet occasionaly using the USB charger provided with the tablet.

Power Presenter RE II“Getting Started”

• Begin Power Presenter by clicking on the “Power Presenter RE II” icon located on your desktop.

Power Presenter RE II Toolbar

Allows you to choose pen color

Allows you to choose your screen view: (Slide Screen, Black Screen, White Screen)

Allows you to choose pen thickness

Erasers and Pen typesMouse arrow to disable penPage up and down

PageE-mail fileSave as an image

Record and Playback screen activity

My computerView a linkExit Power Presenter

Power Presenter Sample Image Created with the “White Screen” and “Slide

Screen” (desktop view)

This feature is great to use when you’ve written notes on your screen or document on your computer and you’d like to save the image to insert in a power

point or use it as a teaching resource