Getting Started Setting up your multimedia equipment
Getting Started
Setting up your multimedia equipment
Unpacking
Remove projector from case
Connect power cord
Unpacking continued
Connect RGB cable to projector
Remote control
Remove remote control from bag and place next to projector
Setting up laptop computer
Remove laptop computer from bag
Connect power cord
Connect power cord to wall outlet Connect RBG cable to laptop Open computer lid using release
latch
Powering up computer
Turn on computer using power button
Powering up projector
Turn on the MAIN power of the projector
Power up the projector
Turn on the projector lamp using the standby/power button on the top of the projector
Getting the picture
Sending computer image to projector To shift the computer image to the
projector, hold down the function key “fn” and push the F3 button (“LCD/CTR”) button.
Laptop keyboard
Log In Screen
When computer starts up it will default to a log in screen. Password is “horizon2”.
No caps, and do not include quote marks.
Office 2000 pro is installed on computer and includes Word, PowerPoint and Excel.
Computer Drives
A DVD-CD drive is located on the right side of the laptop computer
Floppy Drive
The DVD-CD drive can be swapped with the floppy drive.
Be very careful when swapping drives and follow instructions exactly, to prevent damage.
You will be financially responsible for any damage to the computer, or loss of drives.
Swapping drives
Instructions for swapping drives Turn computer over and locate modular latch.
Bottom view of computer
Removing a module (drive)
Slide the latch
Carefully remove the module
Insert floppy drive module
Powering Down Projector
When finished with presentation Turn off the power on the projector and wait
for lamp to cool down before turning off the main power.
Storage of unused drives
Place the disc drive, not in use, in the laptop carry bag.
When fan stops, then turn main power off.
Power down laptop
Close all software programs still open Remove DVD, CD, or Floppy disks from
laptop Shut down laptop computer
Packing up equipment
Remove all cords from the projector and place in carry case Check to see all
cords, cables, and remote control are packed in carry case.
Remove all cables from laptop and return to carry case Transformer and power cord
Floppy or DVD-CD drive Mouse
Return all equipment to Media Services
THANK THANK YOU!YOU!