-
Individuelle Lösungen für die GalvanotechnikCustomized solutions
for the electroplating industry
Solutions individuelles pour la galvanoplastie
CATALOGUE INTÉGRALTonneaux de galvanoplastie, groupes et
contacts courant fort
GESAMTKATALOG Galvaniktrommeln, Aggregate &
Hochstromkontakte
COMPLETE CATALOGUE Plating Barrels, Aggregats & High Current
Contacts
-
Galvaniktrommeln & Aggregate
Über uns 4 Trommelaggregate 6
Trommelwerkstoffe 8
Lagerungssysteme 9
Kontaktsysteme 14
Kontaktkabel 16
Deckelsysteme 18
Perforationen 20
Siebstopfen 22
Kleintrommelaggregate 24
Stangentrommelaggregate 26
Drehgestelle 28
Drehkontaktierungen 29
Beiz- und Phosphatiertrommeln aus Edelstahl 30
Automatische Deckelöffnungs- u. Schließstation (DOS) 31
Elektropoliertrommelaggregate 32
Motorstromkontakte 34
Kunststoffablagen 34
Rohrtrommelkörper 35
Zahnräder 36
English complete catalogue: Barrel aggregates and plating
barrels 52
Catalogue intégral en français : Tonneaux de galvanoplastie et
groupes 102
Hochstromkontakte
Hochstromkontakte 37 Flächenkontakte 38
Flächenkontakte pneumatisch und wassergekühlt 40
Umrüstung der bestehenden Kontaktierung 42
Fingerkontakte 43
Sonderformen und Ablagen 44
Reinigungsvorrichtungen 46
Anschlusskabel und Strombänder 48
Kunststoffablagen 48
Kupferverschienungen 49
Modulbaugruppen 50
Anodenkörbe 50
Kontaktkabel 51
Gestelltechnik 51
English complete catalogue: High-Current Contacts 87
Catalogue intégral en français : contacts courant fort 137
2 3Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DEHochstromkontakte
DE
EN
FR
Seite 52
Seite 102
Seite 4
DE
EN
FR
Seite 52
Seite 102
Seite 4
-
Wir sind ein mittelständisches Unternehmen mit Sitz in Iserlohn
(Sauerland). Jahrelange Erfahrungen machen uns zum Spezialisten für
Galvano- und Hochstromtechnik.
Unser gesamtes Team zeichnet sich durch langjährige Erfahrung
bei der Planung, Entwick-lung und Herstellung von individuellen
Lösungen aus.
Kundenspezifische Beratung wird bei uns groß geschrieben, damit
wir mit Ihnen die passen-den Produkte ermitteln können.
Kompetenz, Engagement und Ideen sind die solide Basis unseres
Unternehmens. Die von uns gefertigten Produkte verfügen über einen
hohen Qualitätsstandard und zeichnen sich durch extreme Haltbarkeit
aus.
Als kompetenter Partner bieten wir Ihnen intelligente und
maßgeschneiderte Lösungen für alle Bereiche der Galvanik an.
Individuelle Lösungen für die Galvanotechnik
Trommelaggregateund Galvaniktrommeln
Ideen für Galvano- und Hochstromtechnik!
4 Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected]
Galvaniktrommeln & Aggregate DE
-
Wir planen, konstruieren und fertigen Trommelaggregate passend
zu Ihrer Anlage, so dass Sie unterbrechungsfrei arbeiten können.
Mit perfekt aufeinander abgestimmten Komponenten liefern wir immer
die richtige Lösung für Ihre Anwendungen. Ausführung als Einzel-,
Doppel-trommelaggregat oder Sonderkonstruktion.
• SEW Stirnradgetriebemotoren• Mit Schutzlack OS3•
Sonderausführungen• Drehzahl- und Pendelsteuerung möglich• Optional
mit Bremse
TrommelaggregateTrommelantrieb
Transportaufnahmen
Kontaktierung
Lagerung
Trommelträger
Schutzhaube
• Transportaufnahmen für Kettenzüge oder Laufwagen•
Motorstromkontaktierung im Laufwagen auf Wunsch
• Standard Messerkontakte • Federnde Motorstromkontakte•
Reinigungsvorrichtungen für saubere Kontaktierungen• Optional
Verbindungsschiene für Potentialausgleich• Andere Aufnahmen auf
Wunsch lieferbar• Großes Programm an Standardtypen
• Lagerung als Kunststoffgleitlager oder flüssigkeitsfestes
Metallgleitlager.
• Galvanisierstromübertragung über Kabel, Scheibe, Knopf, Leiste
... (weitere Informationen auf Seite 14)
• Verwindungsfreie Stahl- oder Edelstahlkonstruktion•
Korrosionsfest epoxydbeschichtet, gebeizt und passiviert oder
gummiert• Alle Träger individuell nach Wunsch ausgeführt.
• Motor- und Getriebeschutz aus Polypropylen• Schutz vor
Prozesslösungen und Dämpfen
6 7Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Kunststoff-Gleitlagermit Kabelkontakt
• Solider Stahlarm • Fest mit der Trommel verbundene
Kontaktscheibe • Mitdrehender Faltenbalg• Spezielles Kontaktfluid
im Inneren des Faltenbalgs• Verschleißfreie, statische
Dichtungen
Lagerungssysteme
• Austauschbare Lagerzapfen und -buchsen• Flexible Kontaktkabel•
Kontaktbirne aus Stahl, Edelstahl, Messing... • Laufbuchsen mit
Ablaufbohrungen
Flüssigkeitsfestes Metall-Gleitlager mit Scheibenkontakt
Volumetrische VerschleißwerteVerschiedene Werkstoffe im
Vergleich
Werkstoff Dichte p in Kg/m3 Verschleiß
PE 1000 0,93 100
Stahl St 37 7,85 160
PE 500 0,96 300
PP 0,92 600
PVC-hart 1,43 900
Buchenholz 0,83 2.700
TrommelwerkstoffeAbhängig von den chemischen und thermischen
Belastungsparametern verwenden wir als Trommelwerkstoff PP, PE 500
oder ultrahochmolekulares Polyethylen PE 1000. Auch Trommeln aus
PPs und PVDF sind möglich.
Trommelwerkstoff PP grau
Trommelwerkstoff PE 500 natur
Trommelwerkstoff PE 1000 natur
• Glatte, wasserabweisende Oberfläche• Resistent gegen
chemischen Angriff • Abriebbeständig • Schlagfest • Bis 80 °C
temperaturbelastbar • Schweißbar
• Glatte, wasserabweisende Oberfläche • Resistent gegen
chemischen Angriff • Gute Abriebbeständigkeit• Besonders schlagfest
• Bis 90 °C temperaturbelastbar • Schweißbar
• Glatte, extrem wasserabweisende Oberfläche • Resistent gegen
chemischen Angriff • Extrem abriebbeständig • Absolut schlagfest •
Bis 100 °C temperaturbelastbar
8 9Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
12
13
14
15
1
4
3
2
5 8
6
17
11 10
9
7
16
19
18
KunststoffgleitlagerEinzelteile für das Kunststoffgleitlager mit
Zwischenradlager und Zahnrad.
Pos. Bezeichnung Werkstoff
1 Flansch (80 x 20 x 150 f. K-Gleitlager) 1.4301
2 Stehbolzen (l = nach Angabe) C45
3 Schraube (M 12 x 25 – DIN 912) 1.4571
4 Mantelrohr (l = nach Angabe) PP
5 Laufzapfenaufnahme PE
6 Laufzapfen PE
7 Zylinderkerbstift (d = 10 x 30 – DIN 1473) PVC
8 Anlaufring PE
9 Laufbuchse PE
10 Schraube (M 16 x 40) PE
11 O-Ring (10,77 x 2,62 – ARP 111) Perbunan
12 Zwischenradblock (150 x 143,3 x 76) PP Gv natur
13 Schraube (M 12 – DIN 933) 1.4571
14 U-Scheibe (13,0 – DIN 7349) 1.4571
15 Dichtschraube PP
16 Lagerbuchse PTFE
17 Zahnrad (Modul u. Zähnezahl nach Angabe) PE 1000 natur
18 Arretierungsscheibe PE 1000 natur
19 Schraube (M 8 x 30 – DIN 7991) 1.4571
10 11Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Einzelteile für das flüssigkeitsfeste Metallgleitlager mit
Scheibenkontakt und Zwischenradlager mit Zahnrad.
23
25
22
Flüssigkeitsfestes Metall-Gleitlager mit Scheibenkontakt
1
24
19
20
18
17
16
15 14
9
12
13
11
108
7
6
2
21
5
27
3 4
26
Pos. Bezeichnung Werkstoff
1 Tragarm mit Flansch 1.4301/St.
2 Lamellenband – LA1 Cu-Ag
3 Druckfeder 1.1200
4 Kontaktstift Cu
5 Faltenrohr mit Rechtsgewinde PE 1000 natur
6 Ausgleichsflansch PE 1000 natur
7 Lagerbuchse Bz-Si
8 Kontaktscheibe Bz
9 Lagerflansch St
10 Dichtring Paragummi
11 Kontaktscheibe St 37 vernickelt
12 Flansch + O-Ring 1.4571 + Perbunan / Viton
13 Verschlussscheibe + O-Ring PE 1000 natur + Perbunan /
Viton
14 Schraube (M 10 x 20 spez.) + O-Ring 1.4571 + Perbunan /
Viton
15 Abdeckkappe PP
16 Schraube (M 10 x 25 – DIN 933) 1.4571
17 O-Ring (129,54 x 5,33) Perbunan
18 Dichtschraube PP
19 Schraube (M 12 – DIN 933) + Federring 1.4571/St
20 U-Scheibe (13 – DIN 7349) 1.4571
21 Zwischenradlagerblock (h = nach Angabe) PP Gv
22 Zahnrad (Modul und Zähnezahl nach Angabe) PE 1000 natur
23 Arretierungsscheibe PE 1000 natur
24 Schraube (M 8 x 30 – DIN 7991) 1.4571
25 Lagerbuchse PTFE
26 Bolzen 1.4301
27 Sicherungsstift PE 1000 natur
12 13Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
KontaktsystemeUm Ihnen die für Ihr Warenspektrum optimale
Kontaktierung liefern zu können, haben wir verschiedene
Standardlösungen entwickelt.
Kabelkontakt mit KunststoffgleitlagerKontaktkabel sind die
kostengünstigsten und häufigsten Kontaktierungen. Sie eignen sich
besonders für kompaktes Schüttgut und decken somit einen breiten
Einsatzbereich ab. Auch mit Hohlbirne und Sonderformen
erhältlich.
Scheibenkontakt mit MetallgleitlagerScheibenkontakte sind sehr
gut geeignet für hohe Strom-übertragungen. Sie sind einsetzbar für
sperrige, kompakte und scharfkantige Waren sowie empfindliche
Güter, die durch feststehende Kontakte beschädigt werden
könnten.
Kabelkontakt mit Kunststoffgleitlager und durchgehender
BirneKontaktkabel mit durchgehender Birne haben eine größere
Oberfläche zum verbesserten Kontaktieren der Ware.Dank der frei
hängenden Kontaktbirne findet kein Schlagen auf die Ware statt.
Diese Eigenschaft macht diesen Typ besonders für empfindliche Ware
interessant.
Leichter Einbau, geringer Wartungsaufwand. Auch mit geschraubter
Kontaktbirne für schnelles Austauschen und als Hohlbirne für
besonders empfindliche Ware erhältlich.Kostengünstige Alternative
zur Leistenkontaktierung.
Leistenkontakt mit MetallgleitlagerLeistenkontakte sind in den
Trommeleckstäben eingelegt und übertragen den Strom vom
flüssigkeitsfestem Metall-gleitlager über Kontaktscheiben
gleichmäßig auf die gesamte Innenlänge der Trommel. Der
Trommelinnenraum bleibt dabei glatt. Mit Leistenkontakten lässt
sich ein umfangreiches Warenspektrum galvanisieren. Diese
Kontaktierung eignet sich besonders gut für Stangenware.
Universalkontaktanschlüsse
mitMetallgleitlagerUniversalkontaktanschlüsse bieten die
Möglichkeit, zahlrei-che verschiedene Kontaktarten wahlweise
einzusetzen und bei Bedarf schnell zu wechseln. Kundenspezifische
Sonder-kontakte lassen sich problemlos realisieren.
Knopfkontakt mit MetallgleitlagerKnopfkontakte bieten ebenso wie
Leistenkontakte eine gleichmäßige Stromübertragung über die gesamte
Trommel-innenlänge. Sie sind in besonderem Maße geeignet für
empfindliche Ware, die durch feststehende Kontakte be-schädigt
werden könnte. Zusätzlich gewährleisten sie selbst bei minimal
gefüllter Trommel eine einwandfreie Stromüber-tragung. Die
Knopfkontakte sind leicht austauschbar.
14 15Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Unsere langlebigen Kontaktkabel werden standardmäßig aus
PUR-Mantelleitung gefertigt. Die speziell für uns gefertigte
Leitung ist in verschiedenen Durchmessern und Querschnitten
erhältlich. Auch Sonderanwendungen wie PVC, Silikon und
Neoprenleitungen sind möglich.
Unsere „Kontaktbirnen“ gibt es wahlweise aus Stahl, Messing,
Edelstahl oder Sonderwerkstoffen, wie Titan oder Kupfer. Die
Ausführung kann hohl, schraubbar, durchgehend oder in weiteren
Sonderformen erfolgen. Lassen Sie sich individuell beraten und
erhöhen Sie die Lebensdauer dieses Verschleißartikels.
Kontaktkabel
Kabelschuh / Anschluss• geschlossener Rohrkabelschuh in schmaler
Ausführung um ein problemloses
Einführen des Kabels durch den Laufzapfen/die Laufbuchse zu
ermöglichen• alle gängigen Anschlussbohrungen
AbdichtungEs stehen 2 Varianten der Abdichtung zur Verfügung:•
Mit einer Gummitülle wird das Kabel gegen Spritzwasser und Staub
geschützt.• Durch Einsatz einer VA-Dichthülse kann das Kabel
flüssigkeitsdicht verschlossen werden.
KabelDie widerstandsfähige PUR Mantelleitung zeichnet sichdurch
eine hohe Haltbarkeit aus. Sie steht in folgenden
Querschnitt/Durchmesser Kombinationen zur Verfügung:• Ø14: 35mm²•
Ø20: 50mm²; 95mm²• Ø25: 95mm²• Ø28: 120mm²• Ø29: 150mm²• Ø30:
120mm²; 185mm²• Ø32: 240mm²
Kontaktbirne• Standardmäßig führen wir Kontaktbirnen
in Stahl, VA oder Messing.• Durch die 8-fach Verpressung mit
mehreren
Tonnen Druck ergibt sich eine dichte Verbindung mit dem
Kabelmantel
• Wahlweise kann die Kontaktbirne zum schnellen Austausch auch
geschraubt ausgeführt werden
Ein Anfrageformular für Kontaktkabel finden Sie im Internet
unter: www.linnhoff-partner.com/downloads
16 17Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Alle Deckelsysteme können manuell oder automatisch geöffnet und
geschlossen werden.
Deckelsysteme
Deckelsystem mit Deckelnut in L-FormEinfache Ausführung eines
dicht schließenden Systems. Oftmals findet dieses Deckelsystem in
Altanlagen Verwendung. Es ist geeignet für die meisten
Warenspektren.
Deckelsystem mit Deckelnut in VK-FormDieses System ist das zur
Zeit am meisten Verbaute. Auch abrasive und spitze Teile dringen
nicht in die Nut ein.
Deckelsystem mit Deckelnut in V-FormÄhnliche Eigenschaften wie
bei der VK-Form, jedoch nur für feine, nicht abrasive Teile
geeignet.
18 19Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
SchlitzperforationDurch überschneidende Fräsung der Schlitze
bleibt die Sta-bilität der einzelnen Mantelplatten erhalten und die
außerge-wöhnliche Werkstoffqualität der Trommel ermöglicht die sehr
dichte Perforierung, somit sind auch höhere Stückge-wichte kein
Problem.
SichelperforationVon allen Perforationen ist die
Sichelperforation für das breiteste Warenspektrum geeignet (Bsp.:
Nägel, Schrauben, Münzen, Blech-, Stanz- und Biegeteile, uvm.). Die
wesentlich größere Öffnungsfläche von bis zu + 30% (beispielsweise
gegenüber einer gleichwertigen Rundperforation) garantiert einen
verbesserten Elektrolytaustausch. Mit speziellen Fräsern kann die
Sichelperforation in Mantelplatten bis 20 mm problemlos eingebracht
werden, dadurch ergibt sich eine wesentliche Erhöhung der
Standzeiten. Die konische Form nach außen ermöglicht ein schnelles
Eindringen sowie ein schnelles Auslaufen des Elektrolyten.
LanglochperforationÄhnlich beschaffen wie die Sichelperforation,
bietet die Lang-lochperforation gleiche Vorteile. Sie wurde
entwickelt als Ersatz zur gesägten Schlitzperforation, da durch die
formsta-bile Geometrie ein Aufweiten der Perforation vermieden
wird.
PerforationenDie Qualität und Wirtschaftlichkeit der
Trommelgalvanisierung hängt in erheblichem Maße von der Art und
Größe der Perforation ab. Zur Auswahl der optimalen Perforation
steht eine breite Palette zur Verfügung.
RundperforationDie außergewöhnliche Werkstoffqualität der
Trommel ermöglicht eine sehr dichte Perforierung. Ansenkungen bzw.
Ein-fräsungen innen und außen fördern den Elektrolytaustausch,
verringern den Spannungsabfall in der Wandung, reduzieren
Schleppungsverluste und verhindern das Ankleben flacher Teile in
der feuchten Trommel.
Besonderheiten:• Sehr enger Lochabstand• Beidseitig angesenkt•
Optional kann auch für klebende Teile überschneidend gesenkt
werden
20 21Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Unsere Siebstopfen haben sich im jahrelangen Einsatz bewährt,
nicht nur im Bereich der Trommeltechnik. Mittlerweile werden unsere
Stopfen auch in Filteranlagen und Siebplatten eingesetzt. In der
großen Palette an Perforationen und Ausführungen, findet sich auch
für Ihr Einsatzgebiet der passende Stopfen.
Unser Siebstopfen-Perforationssystem bietet Ihnen folgende
entscheidende Vorteile:
• Leichter Austausch* der Siebstopfen für eine optimale
Anpassung an die Ware• Durch die Wölbung der Siebstopfenkappe wird
das Ankleben flacher Teile verhindert• Der Siebgewebecharakter
mindert Spannungsabfälle und Verschleppungsverluste• Nach außen
gerichtete große Eintopfungen sorgen mit zusätzlichem Pumpeffekt
für einen optimalen Elektrolytaustausch
* Der Siebstopfen ist danach nicht wiederverwendbar.
A-Siebstopfen Sortiment ca. 40 mm / Werkstoff: PP
E-Siebstopfen Sortiment ca. 23 mm / Werkstoff: PP
Standard
Konkav
Konvex
Siebstopfen
Pos. Bezeichnung Artikel-Nr.
1 0,25 Schlitz 90000100
2 0,4 Schlitz 90064500
3 0,6 Schlitz 90117800
4 1,3 Schlitz 90018400
5 1,3 Schlitz konkav 90081800
6 1 x 1 90000400
7 1,75 x 1,75 90070300
8 2 x 2 90000500
9 2 x 2, konvex 90000700
10 2 x 2, konkav 90037900
11 3 x 3 90000810
12 3 x 3 konvex 90000900
13 8 x 8 konvex 90018300
14 0,25 Schlitz mit 2 x 2 Raster 90000300
15 Sichelsiebstopfen 1,3 mm 90823700
Pos. Bezeichnung Artikel-Nr.
1 0,25 Schlitz 90001300
2 0,4 Schlitz 90019500
3 0,4 x 0,4 90117600
4 1 x 1 90017100
5 1 x 1 konvex 90001400
6 2 x 2 90098900
22 23Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Zum rationellen Veredeln von Kleinserien oder Kleinteilen
entwickelt, findet unsere Kleintrommelserie große Verwen-dung in
vielen Bereichen. Die leichte Handhabung und das geringe
Eigengewicht dieser Baureihe ermöglichen Char-gengewichte bis 13
kg. Bei Einsatz eines Kettenzuges erhöht sich das Gewicht pro
Charge auf bis zu 30 kg.
In der Standard-Ausführung wird der Trommelkörper aus
Polypropylen gefertigt, jedoch sind auch Sonderausführun-gen in
anderen Werkstoffen möglich. Beispielsweise wurden im
Chemisch-Nickel Bereich beste Ergebnisse mit PVDF Trommeln
erreicht.
Um Verschleppungsverluste auf ein Minimum zu reduzieren wird der
gesamte Trommelkörper verschweißt und die Nähte werden geglättet.
Dies verhindert ebenso ein Hängenbleiben der Ware. Eine spe-zielle
Rillenstruktur an den Stirnwänden wirkt dem Ankleben von flacher
Ware entgegen. Dank der groß dimensionierten Deckelöffnung ist ein
einfaches Be- und Entladen möglich.
Der hier angebrachte Deckelverschluss sorgt für höchste
Betriebssicherheit und
einfache Bedienung. Deckelsitz und Deckelform sind so
konstruiert, dass ein Eindringen kleiner Teile zwischen Deckel und
Trommelkörper verhindert wird.
Zur Übertragung des Galvanisierstroms auf die Ware kann aus
verschiedensten Kontaktierungen gewählt werden. Als Beispiel finden
sich hier der klassische Kabelkontakt, sowie auch Scheibenkontakte,
Knopfkontakte, Stiftkontakte und viele weitere Möglichkeiten.
Ebenfalls besteht die Möglichkeit des netzunabhängigen
Akkubetriebs mit Dockingstation sowie Ausrüstung des Aggregats mit
einer Pendel-, Reversier- und/oder Vibrati-onseinheit. Um den
Elektrolytaustausch zu verbessern, kann außerdem eine
Elektrolyteinspritzung verbaut werden.
Rundum ist die Kleintrommelserie der optimale Partner für
rationelles Veredeln. In den Bereichen Elektronikbauteile,
Schmuckindustrie, Kleinserien, Lohngalvanik, Forschung und
Entwicklung ist die Kleintrommel unabdingbar.
Kleintrommelaggregate
24 25Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Speziell für stangenförmiges „flaches oder rundes“ Material
entwickelt, können die Aggrega-te als Einfach- oder
Doppeltrommelaggregate ausgelegt werden. Durch den Einsatz von
herausnehmbaren Zwischenwänden ist die Trommel in mehrere nutzbare
Abschnitte unter-teilbar. Ausgelegt sind die Aggregate für
Chargengewichte von über 300 kg und Längen bis zu 2500 mm.
Schutzhaube
Warenkörbe mit Kontaktierung
Verstellbare Stirnwände
Korböffnung
• Motor- und Getriebeschutz aus Polypropylen• Schutz vor
Prozesslösungen und Dämpfen
• Zur Kontaktierung werden Stiftkontakte eingesetzt, welche
mittig in den Aufnahmekörben sitzen. Diese Kontaktstifte können
einseitig, beidseitig oder durchgehend ausgeführt werden und sind
einzeln austauschbar.
• Für unterschiedliche Waren können verschiedene Geometrien in
die Korböffnung eingebracht werden, beispielsweise 6-eck oder
4-eck. Standardmäßig sind die Körbe mit einer runden Geometrie
ausgestattet.
• Die groß dimensionierte Korböffnung mit 135° Öffnungs-winkel
ermöglicht ein leichtes Befüllen der Körbe.
Stangentrommelaggregate
• Durch den Einsatz von herausnehmbaren und verstellbaren
Zwischenwänden kann die Trommel in mehrere nutzbare Abschnitte
unterteilt werden. Die Verstellung der Zwi-schenwände erfolgt über
einen Pressstift, wodurch sich eine formschlüssige Fixierung
ergibt.
Transportaufnahmen
Kontaktierung
Lagerung
Trommelträger
• Transportaufnahmen für Kettenzüge oder Laufwagen•
Motorstromkontaktierung im Laufwagen auf Wunsch
• Standard Messerkontakte • Federnde Motorstromkontakte•
Reinigungsvorrichtungen für saubere Kontaktierungen• Optional
Verbindungsschiene für Potentialausgleich• Andere Aufnahmen auf
Wunsch lieferbar• Großes Programm an Standardtypen
• Flüssigkeitsfestes Metallgleitlager.
• Verwindungsfreie Stahl- oder Edelstahlkonstruktion•
Korrosionsfest epoxydbeschichtet, gebeizt und passiviert oder
gummiert• Alle Träger individuell nach Wunsch ausgeführt.
• SEW Stirnradgetriebemotoren• Mit Schutzlack OS3•
Sonderausführungen• Drehzahl- und Pendelsteuerung möglich• Optional
mit Bremse
Trommelantrieb
26 27Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Drehgestelle stromlos und stromführend DrehkontaktierungenFür
Bauteile mit ungünstigen Geometrien wie Sacklöchern,
Hinterschneidungen oder Taschen, in denen sich Luftblasen bilden
können, sind unsere Drehgestelle die perfekte Lösung. Die Ware wird
hierbei in speziellen Vorrichtungen einzeln
aufgenommen oder alternativ in Körben mit dem Gestell adaptiert.
Somit ist eine gleichmäßige Behandlung möglich und Beschädigungen
werden minimiert.
Ein weiterer Bereich sind die stromführenden
Drehkontaktie-rungen, welche für die Aufnahme von ein bis maximal
zwei Werkstücken konzipiert sind. Diese Drehkontaktierungen finden
häufig Einsatz im Bereich des Galvanoforming oder bei
Hartchromverfahren. Beispielhafte Anwendungen sind
das Beschichten von Prägewalzen oder Kolbenstangen.
Stückgewichte von mehreren hundert Kilogramm sind hier keine
Seltenheit. Lassen Sie sich für Ihren Anwendungsbe-reich persönlich
beraten und vereinbaren Sie einen Termin.
28 29Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Diese Aggregate werden speziell nach Kundenwunsch gefertigt. Die
Perforation ist nach Ihren Wünschen ausleg-bar. Trommelträger und
Schutzhauben werden aus unserem
Standardprogramm verwendet. Trommelkörper und Lager-holme werden
aus Edelstahl, wahlweise 1.4301, 1.4401 oder 1.4571 gefertigt.
Automatische Deckelöffnungs- und Schließstation (DOS)
Ablaufvorgang bei der DeckelöffnungDie Deckelöffnungsvorrichtung
fährt die Galvanisiertrommel in der Be- und Entladestation
eigenständig an, bringt sich in Vorposition und wird anschließend
feinpositioniert. Nach der eben beschriebenen Positionierung setzt
nun der eigentliche Deckelöffnungsvorgang ein.
Durch das Ausfahren des Hubzylinders werden die
Deckelöffnungswerkzeuge in Schräglage gebracht und greifen in die
Aussparungen der Deckelknebel. Die Konstruktion der Greifwerkzeuge
gewährleistet zum einen das reibungslose Greifen der Knebel und zum
anderen das sichere Halten des Deckels in der
Deckelöffnungsvorrichtung.
Da die Deckelöffnungswerkzeuge durch einen Flachstab miteinander
verbunden sind, ist sichergestellt, dass der Neigungs-winkel der
einzelnen Werkzeuge zu jeder Zeit absolut identisch ist.
Nachdem nun der Deckel durch die Öffnungsvorrichtung aufgenommen
ist, bewegt sich die Vorrichtung mitsamt Deckel in die
Ausgangsposition zurück. Die Trommel kann nun ungehindert be- bzw.
entladen werden.
Durch die einfache Konstruktion dieser Be- und Entladestation
werden Bewegungsvorgänge auf ein Minimum reduziert. Dadurch ergeben
sich eine Reihe entscheidender Vorteile im Bezug auf
Wirtschaftlichkeit, Zuverlässigkeit und Langlebigkeit.
Funktionsprinzip LINNHOFF & PARTNER
Ablaufvorgang beim Schließen des DeckelsDas Schließen des
Deckels geschieht analog zur Deckelöffnung, nur in umgekehrter
Reihenfolge. Die Vorrichtung befördert den Deckel immer zuverlässig
und exakt in die Trommelöffnung zurück.
Beiz- und Phosphatiertrommeln aus Edelstahl
30 31Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Die Firma Linnhoff & Partner Galvanotechnik hat bei diesem
neuartigen Konzept einer Elektropoliertrommel ein besonde-res
Augenmerk auf die Qualität der fertigen Ware gelegt. Mit der
EP-Trommel ist es erstmalig möglich, Ware mit einem maximalen
Volumen von 8 Litern bzw. einem maxi-malen Gewicht von 25 kg in
gleicher und höchster Qualität zu elektropolieren.
Die Vorteile dieser Trommel im Überblick: • Sorgfältige
Verarbeitung unter Einsatz hochwertiger Werkstoffe garantiert eine
hohe Lebensdauer auch
bei starker Belastung• Solide, werkstoffgerechte Systembauweise
• Ein passgenauer und dicht schließender Deckel •
Anwenderfreundliche Bedienbarkeit und Betriebssicher-
heit, die aufgrund des Deckelverschlusssystems auch höchsten
Ansprüchen gerecht wird • Stabile Lagerung • Optimaler
Elektrolytaustausch und minimierter
Verschleppungsverlust durch glatte, wasserabweisende
Materialoberflächen und spaltenfreie Übergänge in
Verbindung mit einem ausgefeilten Perforationssystem
Bei einer Befüllung von 80% des Trommelvolumens (ca. 8 Liter),
beträgt der zugeführte Strom ca. 500 Ampere bei 6 bis 10 Volt
Spannung. Der Zyklus zum Elektropolieren beträgt zwischen 1 und 15
Minuten – je nach Zustand des Vormate-rials. Dank der extra
entwickelten Steuerelektronik ist eine stufenlose
Drehzahleinstellung sowie ein Pendelbetrieb möglich.
Die flüssigkeitsfesten Metallgleitlager übertragen den Strom
direkt auf den Titan- bzw. Edelstahltrommelkörper. Das spe-zielle
Kontaktfluid im Inneren der Lager hält die Kontaktflä-chen sauber.
Dieses System erlaubt Stromübertragungen bis 500 Ampere pro
Seite.
Der doppelwandige Trommelkörper und das doppelwandige
Zentralrohr sind absolut kurzschlusssicher. Eine Wandung überträgt
dabei den Anodenstrom, die andere den Katho-denstrom.
AntriebWir verwenden für den Antrieb qualitativ hochwertige
Stirn-radgetriebemotoren mit Schutzschalter. Die Motorspannung
beträgt 12 oder 24 Volt Gleichstrom. Zudem lässt sich die
Trommeldrehzahl stufenlos am Aggregat einstellen.
KontaktauflageZur Warenstromübertragung verwenden wir
standard-mäßig Messerkontakte aus Kupfer, die auch für hohe Ströme
geeignet sind.
TrommelkörperDer Trommelkörper wird aus Titan und Edelstahl
1.4571 gefertigt. Das flüssigkeitsfeste Metallgleitlager ermöglicht
eine Stromübertragung von bis zu 500 A. Die spezielle Form des
Deckels garantiert einen spaltfreien Sitz. Mit den hand-lichen
Deckelknebeln lässt sich der Deckel leicht öffnen und
schließen.
TransportaufnahmenDie Transportaufnahme für die EP-Trommel ist
mit einer Lastöse ausgestattet. Auf Wunsch liefern wir Ihnen aber
auch andere Transportwagenaufnahmen. Eine Anpassung der Aufnahmen
oder des gesamten Trägers ist in den meisten Fällen
realisierbar.
Elektropoliertrommelaggregat
32 33Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Der Motorstromkontakt ist ein wichtiger Bestandteil eines gut
funktionierenden Trommelaggregates. Unsere Motorstromkon-takte
haben entscheidende Vorteile und stellen einen störungsfreien Lauf
Ihrer Anlage sicher.
Vorteile:• Selbstreinigende Kontaktflächen• Sehr hohe
Stromübertragung (bis zu 60 Ampere)• Äußerst robust und daher sehr
betriebssicher• Wartungs- und reparaturfreundlicher Aufbau
Kunststoffablagen fertigen wir meist aus PE oder PP. Sie haben
die Wahl zwischen unseren preisgünstigen Stan-dardablagen oder
einer auf Sie zugeschnittenen Ablage.
Durch unsere 5-Achsen CNC Zentren sind wir in der Lage auch
komplexe Geometrien zu fertigen. Ein Muster oder eine Skizze ist in
den meisten Fällen vollkommen ausreichend.
Mit dieser »Trommel in der Trommel« können Sie kleine Chargen
galvanisieren, indem Sie den Rohrtrommelkörper einfach in die
vorhandene Trommel legen. Der Körper wird aus PP grau gefertigt und
hat zur Kontaktierung Schrauben mit Hutmuttern aus Edelstahl. Es
stehen zwei Größen mit den Innendurchmessern 50 mm und 100 mm zur
Auswahl. Die Länge bestimmen Sie selbst. Beim Trommelkörper mit
100 mm Innendurchmesser sind die Kontakte auch stirnsei-tig
angebracht. Die Standardperforation ist rund mit 6 mm
Durchmesser.
Sonderperforationen und -formen sind auf Wunsch lieferbar.
Motorstromkontakte
Kunststoffablagen
Rohrtrommelkörper
34 35Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Galvaniktrommeln & Aggregate DE
-
Unsere Zahnräder werden vom Einzelteil bis zur Kleinserie
komplett in unserem Haus gefertigt. Von Antriebszahnrädern für
Kleintrommelaggregate bis zu mehrteiligen Zahnradbau-gruppen ist
für uns alles möglich.
Den häufigsten Einsatz findet hier PE 1000, aber auch andere
Materialien wie PE 500, PP, PPs, VA und viele weitere sind möglich.
Ebenso Kombinationen aus Kunststoff und Metall.
Zahnräder Hochstromkontakte &Reinigungsvorrichtungen
Ideen für Galvano- und Hochstromtechnik!
36 Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected]
Hochstromkontakte DE
-
überzeugen durch ihren einfachen Aufbau. Eine stabile
Schweißkonstruktion aus hochwertigem Edelstahl sorgt für einen
dauerhaften reibungslosen Einsatz. Die Kontaktplatten werden durch
isolierte Federn mit hohem Druck an die Kontaktflächen gepresst,
wodurch eine optimale Stromüber-
tragung erreicht wird. Der Anschluss erfolgt mit einfachen
Anschlusskabeln direkt auf die Kontaktplatten. Bei Waren-bewegungen
sind somit keine zusätzlichen Strombänder erforderlich. Robust,
wartungsfreundlich, kostengünstig und selbstreinigend.
Flächenkontakte
Druckfedern• Isolierte Druckfedern aus
Edelstahl für konstanten Druck• Optionale Korrosionsschutz-
beschichtung
Überwachung• Optionale Überwachung
der Kontakte mit PT100 Temperaturfühlern
Schutzhauben• Schutzhauben aus 1.4301
zum Schutz vor herabfallen-der Verschmutzung
Stabile Edelstahlkonstruktion• Trägerkonsole aus 1.4301 mit
stabilen
Einweisern als Schweißkonstruktion• Optional aus 1.4571, mit
Beschichtung
oder mit zusätzlichen PE-Einweisern
Anschlüsse• Gerade oder gewinkelt zum
leichten Anschluss der Strombänder
Auswechselbare Kontaktplatte• Einfach auszutauschende
Kontaktplatten
mit Abstreifnuten zur Selbstreinigung beim Einfahren
38 39
1500 A 3000 A
Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0 oder
an: [email protected]
Ideen für Galvano- und Hochstromtechnik!
Hochstromkontakte DE
-
Pneumatisch Pneumatische Kontakte werden nur dort eingesetzt, wo
sehr hohe Ströme, sehr wenig Platz oder geringe Einfahrgewichte
eine Herausforderung darstellen. Der Anpressdruck wird durch den
Einsatz von vulkanisierten Druckkissen erreicht. Bei den
pneumatischen Kontakten sind kaum Grenzen gesetzt, Kontakte mit 20
KA und mehr sind keine Seltenheit. Durch eine optionale
Wasserkühlung ist eine Leistungserhö-hung jederzeit möglich. Die
Kosten sind verhältnismäßig hoch, allerdings wird durch ihren
Einsatz ein Höchstmaß an Prozesssicherheit erreicht.
Wassergekühlt Zur Erhöhung der Leistung bei gleichem Bauraum wie
ein normaler Flächenkontakt empfiehlt sich der Einsatz einer
Wasserkühlung. Dies ermöglicht, je nach Kühlleistung, eine
Steigerung des maximalen Stroms um bis zu 35%. Die Wasserkühlung
befindet sich direkt in den Anschlussplatten. Zur optimalen
Überwachung der Kontakte empfiehlt sich immer der Einsatz von PT100
Temperatursensoren. Somit ist jederzeit ein sicherer Betrieb der
Kontakte gewährleistet.
Druckkissen• Pneumatischer Antrieb unter
Einsatz von vulkanisierten Druckkissen
Druckfedern• Isolierte Druckfedern aus
Edelstahl für konstanten Druck• Optionale
Korrosionsschutzbe-
schichtung
Isolierplatte• Isolierplatte aus PPs oder HGW
zum Schutz des Druckkissens vor Wärmeeinwirkung
Wasserkühlung• Optionale Wasserkühlung zur
Erhöhung der Leistung
Kontaktplatten• Einfach auszutauschende Kontakt-
platten mit Abstreifnuten zur Selbst- reinigung beim
Einfahren
Schutzhauben• Schutzhauben aus 1.4301
zum Schutz vor herabfal-lender Verschmutzung
Anschlüsse• Gerade oder gewinkelt
zum leichten Anschluss der Strombänder
Trägerkonsole• Trägerkonsole aus 1.4301 mit stabilen
Einweisern als Schweißkonstruktion• Optional aus 1.4571, mit
Beschichtung
oder mit zusätzlichen PE-Einweisern
Überwachung• Optionale Überwachung
der Kontakte mit PT100 Temperaturfühlern
Flächenkontakte mit pneumatischemAntrieb und Wasserkühlung
40 41Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Die bestehende Kontaktierung lässt sich für jede
Anlageindividuell anpassen. Alle unsere Systeme sind in der
Praxiserprobt und je nach Ausführung ist eine Vervielfachung der
Leistung möglich.
Einfache Umrüstung der bestehenden Kontaktierung
Prismenaufnahme
Kontaktschwert-Aufnahme
Rundzapfenaufnahme
V-Aufnahme
Fingerkontakte mit mehreren federgespannten Einzelfingern sorgen
für eine gute Kontaktierung auch bei unebenen Kontaktflächen am
Warenträger. Im Idealfall besitzen die Kontaktfinger Abstreifnuten,
welche den oberflächlichen
Schmutz beim Einfahren des Warenträgers abreiben. Um die
beweglichen Elemente mit dem Grundkörper zu verbinden werden
Folienbänder verwendet.
Durch die Verwendung eines Druckkissens in der pneuma-tischen
Version des Fingerkontakts ist es möglich, den Kontaktdruck zu
erhöhen und somit eine bessere Kontaktie-rung zu erreichen.
Besonders bei bestehenden Anlagen
sind die Kontaktoberflächen der Warenträger oft uneben. Hier ist
es sinnvoll, die Kontakte mit pneumatischen Fingern zu wählen.
Fingerkontakte
Pneumatisch
42 43Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Sonderformen und Ablagen
BolzenkontakteBolzenkontakte wurden zu Beginn der
Automatisierung an Galvanikanlagen eingesetzt. Heute finden Sie
immer noch Verwendung als Anodenkontakte und für Elektrolysezellen.
Der Grundkörper ist aus massivem Messing und wird direkt auf die
Anschlussschiene montiert. Somit entfallen unnötige
Verbindungsstellen.
Im Inneren des Kontaktes befinden sich federgelagerte Bolzen in
Verbindung mit Kontaktlamellen. Die Höhe des maximalen Stroms hängt
von der Anzahl der Kontaktbolzen ab. Jeder Bolzen ist in der Lage,
ca. 400A zu übertragen. In den meisten Fällen empfiehlt sich jedoch
der Einsatz eines günstigeren Hochstromflächenkontaktes.
Messingablagen werden bereits seit mehr als 100 Jahren
eingesetzt. In den Anfängen der industriellen Galvanik wurden neben
den Messingablagen lediglich gebogene Federkontakte verwendet. Bei
kleinen Strömen bis 500 A
sind diese Kontakte auch heute noch ausreichend. Geringe Kosten
und gute mechanische Eigenschaften sind ein Vorteil, leider
verfügen sie nicht über einen „Selbstreini-gungseffekt“ und müssen
daher ständig gepflegt werden.
Wir fertigen unsere Kontakte nicht ausschließlich für den
Bereich der Galvanotechnik. Sonderlösungen finden sich zum Beispiel
auch in Wartungsanlagen für Züge, Schnell-wechselsystemen für
Presswerkzeuge, Vakuumöfen, Prüffeldern, Recyclinganlagen und
Spezialanlagen für die Raumfahrt.
Überall dort, wo hohe Ströme sicher übertragen werden müssen,
bieten Sonderkontaktierungen von Linnhoff und Partner die passende
Lösung. Jedes Projekt wird in solchen Fällen intensiv mit Ihnen
ausgearbeitet bis eine wirtschaft-lich sinnvolle und
funktionierende Lösung gefunden ist.
Schlittenkontakte finden sich häufig in
Leiterplattengalvani-ken, weil dort nur geringe Einfahrgewichte
vorhanden sind. Der Einsatz von Schlittenkontakten erfordert eine
hohe Einfahrgenauigkeit und präzise Position der Kontakte.
Durch
die nur beschränkten Ausgleichsmöglichkeiten sind diese nicht
für 3 oder 4-Punkt Auflagen geeignet. Sowie die Messingablagen
verfügen auch die Schlittenkontakte nicht über einen
„Selbstreinigungseffekt“.
Sonderkontaktierungen
Schlittenkontakte
Messingablagen
44 45Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Was schon vor 90 Jahren ein Thema war, wird heute doch immer
noch oft vergessen. Nur saubere Kontakte können effizient
arbeiten.
Zur Unterstützung des Personals empfiehlt sich der Einsatz von
Reinigungsvorrichtungen im Bereich der Spülen. Diese
Reinigungsvorrichtungen arbeiten unabhängig vom Anla-genbediener.
Bei jedem Zyklus werden die Kontaktflächen des Trägers
gereinigt.
Auch hier zahlt sich der einfache und solide Aufbau aus. Die
Bürsten können einzeln getauscht werden. Reinigungsvor-richtungen
gibt es für jeden Kontakttyp (Schwert, Zapfen, Prisma, etc.). In
den meisten Fällen können die Reinigungs-vorrichtungen einfach
gegen die bestehenden Kunststoffauf-nahmen getauscht werden.
Reinigungsvorrichtungen„Anfänger übersehen häufig die
Reinhaltung der Leitungen und Kontakte,
und doch ist dies von ganz besonderer Wichtigkeit für die
Stromzirkulation und infolgedessen für die Niederschlagsarbeit.“
Dr. W. Pfanhauser, Galvanotechnik, 1928
Stabile Edelstahlkonstruktion • aus 1.4301• Individuelles
Lochbild der Befestigungsbohrungen
gemäß Ihren Anforderungen
Federgelagerte Halteklötze aus PE 1000• Zur Aufnahme der
Streifenbürsten• über die Innensechskantschrauben können die
Halteklötze justiert werden
Einzeln austauschbare Bürsten aus 1.4301• Die Streifenbürsten
können direkt am Behälter
ausgetauscht werden, es ist kein Ausbau der
Reinigungsvorrichtung notwendig.
46 47Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Zum Anschluss der Hochstromkontakte oder auch Gleich-richter
empfehlen wir den Einsatz hochflexibler Anschluss-kabel. Diese
fertigen wir in verschiedenen Ausführungen und Querschnitten,
direkt nach Ihren Anforderungen. Wahlweise bestehen die Kabel aus
verpressten Cu-Litzen mit Anschlussflansch oder Kabelschuh. Je nach
Anwendungs-bereich und Umgebung werden die Anschlusskabel mit
Schutzschläuchen verschiedenster Materialien, wie PVC, Silikon oder
PUR, versehen und dicht verpresst. Bei der Auswahl des passenden
Kabels stehen wir Ihnen gerne zur Verfügung.
Anschlusskabel und Strombänder
Kunststoffablagen
KupferverschienungenZubehör
Kunststoffablagen fertigen wir meist aus PE oder PP. Sie haben
die Wahl zwischen unseren preisgünstigen Stan-dardablagen oder
einer auf Sie zugeschnittenen Ablage. Durch unsere 5-Achsen CNC
Zentren sind wir in der Lage auch komplexe Geometrien zu fertigen.
Ein Muster oder eine Skizze ist in den meisten Fällen vollkommen
ausreichend.
Durch den Einsatz moderner und professioneller Stanz- und
Biegetechnik sind wir in der Lage, Kupferverschienungen vor Ort zu
fertigen und zu montieren. Dabei wird das Roh-material vor Ort
geschnitten, gestanzt und gebogen um eine genaue Anpassung an die
Umgebung zu gewährleisten.
Alle Verschienungen werden auf Wunsch einschließlich
Montagematerial, Isolierungen und Abdeckungen geliefert.Auch der
Umbau bestehender Verschienungen oder der
Austausch einzelner Segmente ist in den meisten Fällen
problemlos möglich.
In Kombination mit unseren Kontakten oder Modulbaugrup-pen
erhalten Sie für den Weg vom Gleichrichter bis zum Behälter alles
aus einer Hand, das verspricht maximale Kompatibilität.
48 49Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Modulbaugruppen
Gestelltechnik
Zubehör
Eine Modulbaugruppe beschreibt eine fertig vormontierte
Wannenrandausstattung. Hierbei werden Kunststoffablagen,
Aufnahmegabeln, Hochstromkontakte, Motorstromkontakte und
Reinigungsvorrichtungen in der gewünschten Anord-
nung und Stückzahl auf Kunststoffhalter montiert. Die Baugruppen
können dann als Ganzes geschraubt oder angeschweißt werden. Dies
erspart eine mühevolle Ausrich-tung aller Einzelkomponenten.
Neben den klassischen Hochstromkontakten und Tromme-laggregaten
haben wir auch klassische Bauteile der Gestell-technik im Angebot.
Dieses reicht von Gestellklemmen mit Niederhalter „Lipfix“, über
Anodenklemmen bis hin zu Gestellköpfen und Halteklötzen. Bei uns
erhalten Sie alle benötigten Komponenten für Ihre Warenträger. Auch
Sonderanfertigungen, Kleinserien und Einzelstücke finden Sie bei
uns. Lassen Sie sich beraten.
AnodenkörbeBei uns erhalten Sie Anodenkörbe in verschiedenen
Größen und Ausführungen. Die Form und Art der Befestigung wird
kundenspezifisch ausgelegt. Auch die Anfertigung nach Handskizzen
und Mustern stellt für uns kein Problem dar.
Unsere langlebigen Kontaktkabel werden standardmäßig aus
PUR-Mantelleitung gefertigt. Die speziell für uns gefertigte
Leitung ist in verschiedenen Durchmessern und Querschnit-ten
erhältlich. Auch Sonderanwendungen wie PVC, Silikon und
Neoprenleitungen sind möglich. Unsere „Kontaktbir-
nen“ gibt es wahlweise aus Stahl, Messing, Edelstahl oder
Sonderwerkstoffen, wie Titan oder Kupfer. Die Ausführung kann hohl,
schraubbar, durchgehend oder in weiteren Sonderformen erfolgen.
Lassen Sie sich individuell beraten und erhöhen Sie die Lebensdauer
dieses Verschleißartikels.
Kontaktkabel
50 51Persönliche Beratung und Bestellungen: +49 23 71 / 15 75-0
oder an: [email protected] Ideen für Galvano- und
Hochstromtechnik!
Hochstromkontakte DE
-
Plating Barrels & Aggregats
About us 54 Barrel aggregates 55
Barrel materials 58
Bearing systems 59
Contact systems 64
Contact Cable 66
Cover systems 68
Perforations 70
Filter plugs 72
Small barrel aggregates 74
Satellite plating aggregates 76
Rotating racks 78
Rotating contact systems 79
Pickling and phosphating barrels 80
Automatic cover opening and closingstation (DOS) 81
Electro-polishing barrel 82
Motor current contact 84
Plastic receptions 84
Tube barrel body 85
Gearwheels 86
Gesamtkatalog: Trommelaggregate und Galvaniktrommeln 4
Catalogue intégral en français : Tonneaux de galvanoplastie et
groupes 102
High-Current Contacts
High-Current Contacts 87 Surface contacts 88
Surface contacts with pneumatic drive and water cooling 90
Easy refitting of existing contact system 92
Fingercontacts 93
Special designs and receptions 94
Cleaning devices 96
Connecting cables and conductor lines 98
Plastic receptions 98
Copper rail connections 99
Module components 100
Anode baskets 100
Cable contacts 101
Rack technology 101
Gesamtkatalog: Hochstromkontakte 37
Catalogue intégral en français : contacts courant fort 137
DE
EN
FR
Seite 52
Seite 102
Seite 4
DE
EN
FR
Seite 52
Seite 102
Seite 4
EN
52 53Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates High-Current Contacts
-
We are a medium-sized company based in Iserlohn (North
Rhine-Westphalia). Long-lasting experience has made us experts for
electroplating and high-current technology. Our team has profound
experience in planning, developing and achieving customized
solutions.
We take customer-specific advice serious in order to identify
the suitable products together with you.
Competence, commitment and ideas create the solid platform of
our company. Our products share a high quality standard and stand
out because of extreme durability.
As a competent partner we offer you intelligent and customized
solutions for all aspects of electroplating.
Customized solutions for the electroplating industry
Barrel aggregates andplating barrels
Ideas for electroplating and high current!
EN
54 Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected]
Plating Barrels & Aggregates
-
• SEW gear wheel motors• protective varnish OS3• special
designs, speed regulation and swing control system possible• brake
optional
DriveBarrel aggregatesWe plan, construct and produce barrel
aggregates appropriate to your system so that your machine can work
without interruptions. Due to our perfect matching components we
always provide the correct solution for your applications.
Manufacturing as single or double-barrel aggregate or special
construction.
Transport bars
Contact systems
Bearing
Barrel carrier
Protective cover
• transport bars for chain hoists or carriers• motor current
contact system inside
the carrier if requested• standard blade contact• elastic motor
current contacts • cleaning devices for clean contact systems •
connecting rail for equipotential if requested• other bars
possible• extensive range of standard types• for detailed
information see chapter ‘High current technology’
• bearing as plastic sleeve bearing or liquid-tight metal sleeve
bearing
• current transmission for electroplating by cable, disk,
button, bar … (for further information see p. 66)
• torsion-free constructions made of steel or stainless steel•
resistant to corrosion due to epoxy resin coating, pickled
and passivated or rubberized• individually designed carriers
possible
• protection for motor and gear units made of PP• protection
against process solutions and vapours
EN
56 57Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Plastic sleeve bearing with cable contact
• solid steel arm• contact disk firmly connected to the barrel•
rotating bellows• special contact fluid inside the bellows•
wear-free static seals
Bearing systems
• interchangeable bearing pivots and bearing bushes• flexible
contact cables• contact bulb made of steel, stainless steel, brass
…• bushings with drain holes
Liquid-tight metal sleeve bearing with disk contact
Contrasting volumetric wear values of different materials
Material density p in Kg/m3 wear
PE 1000 0,93 100
Steel St 37 7,85 160
PE 500 0,96 300
PP 0,92 600
PVC-hard 1,43 900
Bechwood 0,83 2.700
Barrel materialsDepending on the chemical and thermic stress
parameters we use PP, PE 500 or ultra-high molecular polyethylene
PE 1000 as barrel materials. It is also possible to produce barrels
made of PPs and PVDF.
Barrel material PP grey
Barrel material PE 500 natural
Barrel material PE 1000 natural
• smooth, water-repellent surface• resistant to chemical attack•
resistant to abrasion• impact-resistant• resisting temperatures of
up to 80 °C• weldable
• smooth, water-repellent surface• resistant to chemical attack•
good resistance to abrasion• particularly impact-resistant•
resisting temperatures of up to 90 °C• weldable
• smooth, water-repellent surface• resistant to chemical attack•
extremely resistant to abrasion• totally impact-resistant•
resisting temperatures of up to 100 °C
EN
58 59Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Plastic sleeve bearingSingle components for the plastic sleeve
bearing with intermediate wheel bearing and cogwheel
Pos. name material
1 flange (80 x 20 x 150 for plastic sleeve bearing) 1.4301
2 stud bolt (length on demand) C45
3 screw (m 12 x 25 – DIN 912) 1.4571
4 casing pipe (length on demand) PP
5 carrier pivot bar PE
6 carrier pivot PE
7 grooved dowel pin (d = 10 x 30 – DIN 1473) PVC
8 thrust ring PE
9 bushing PE
10 screw (m 16 x 40) PE
11 O-ring (10,77 x 2,62 – ARP 111) perbunan
12 idle wheel block (150 x 143,3 x 76) PP glass fibre reinforced
natural
13 screw (m 12 – DIN 933) 1.4571
14 washer (13,0 – DIN 7349) 1.4571
15 seal screw PP
16 bearing bush PTFE
17 cogwheel (model and number of teeth on demand) PE 1000
natural
18 locking wheel PE 1000 natural
19 screw (m 8 x 30 – DIN 7991) 1.4571
12
13
14
15
1
4
3
2
5 8
6
17
11 10
9
7
16
19
18
EN
60 61Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Single components for the liquid-tight metal sleeve bearing with
disk contact and intermediate wheel bearing and cogwheel
23
25
22
Liquid-tight metal sleeve bearing with disk contact
1
24
19
20
18
17
16
15 14
9
12
13
11
108
7
6
2
21
5
27
3 4
26
Pos. name material
1 support arm with flange 1.4301/st.
2 strip belt – LA1 Cu-Ag
3 compression spring 1.1200
4 contact pin Cu
5 bellow with right-hand thread PE 1000 natural
6 balancing flange PE 1000 natural
7 bearing bush Bz-Si
8 contact disk Bz
9 bearing flange St
10 seal ring para rubber
11 contact disk st37 nickel-plated
12 flange + O-ring 1.4571 + perbunan / viton
13 locking disk + O-ring PE 1.000 natural + perbunan / viton
14 screw (m 10 x 20 spec.) + O-ring 1.4571 + perbunan /
viton
15 covering cap PP
16 screw (m 10 x 25 – DIN 933) 1.4571
17 O-ring (129,54 x 5,33) perbunan
18 sealing screw PP
19 screw (m 12 – DIN 933) + spring ring 1.4571/st.
20 washer (13 – DIN 7349) 1.4571
21 idle wheel bearing block (height on demand) PP glass fibre
reinforced
22 cog wheel (model and number of teeth on demand) PE 1000
natural
23 locking wheel PE 1000 natural
24 screw (m 8 x 30 – DIN 7991) 1.4571
25 bearing bush PTFE
26 bolt 1.4301
27 safety pin PE 1000 natural
EN
62 63Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Contact systemsWe have developed various standard solutions to
provide you with the optimal contact system for your range of
products.
Cable contact (dangler) with plastic sleeve bearingCable
contacts are the most cost-efficient and widespread contact
systems. They are particularly suitable for compact bulk goods.
Thus they cover a broad range of application. They are also
available with hollow bulb or in special designs.
Disk contact with metal sleeve bearingDisk contacts are
excellently suitable for high current transmissions. They can be
used for bulky, compact and sharp- edged goods as well as sensitive
goods which could be damaged by static contacts.
Cable contact (dangler) with plastic sleeve bearing and
continuous bulbCable contacts with continuous bulbs have a larger
surface for a better contacting of the goods. Due to the
loose-han-ging contact bulb the goods are not hit. Therefore, this
cable system is especially interesting for sensitive goods.
It can be easily installed and maintenance costs are low. It can
also be obtained with a screwed contact bulb for a quick
replacement and with a hollow bulb for extremely sensitive goods. A
cost-effective alternative to a rod contact system.
Rod contact with metal sleeve bearing Rod contacts are inserted
into the edge bars of the barrel and transfer the current from the
liquid-tight metal sleeve bearing via contact disks evenly along
the total inner length of the barrel. The interior space of the
barrel remains smooth. Rod contacts are suitable for electroplating
a wide range of goods. This type of contact system is especially
suitable for rod-shaped parts.
Universal contact with metal sleeve bearingUniversal contacts
offer the possibility to apply numerous different types of contacts
and change them quickly if requi-red. Customized special designs
can be easily realised.
Button contact with metal sleeve bearingSimilar to rod contacts,
button contacts offer an even current transmission along the total
inner length of the barrel. They are especially suitable for
sensitive goods which could be damaged by static contacts.
Moreover, even if the barrel is only filled minimally, they
guarantee a perfect current trans-mission. Button contacts can be
easily replaced.
EN
64 65Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Our long-lasting contact cables are made of PUR sheating as
standard. This sheating especially made for us is available in
different diameters and cross sections. It is also possible to
produce them of PVC, silicone and neoprene.
Our contact heads are available made of steel, brass, stainless
steel or special materials like titan or copper. They can be
designed in various versions: hollow, screwable, continuous or
further designs. Ask for personal advice to enhance the durability
of this item subject to wear.
Contact Cable
You will find an application form for cable contacts on the
internet at: www.linnhoff-partner.com/en-downloads
Cable lug / connection• tubular cable lug in narrow design to
enable an easy cable
insertion through the bushing or carrier trunnion• all standard
drillings
SealingThere are 2 kinds of sealings available:• The cable is
protected against spray and dust by a rubber grommet.• The cable
can be liquid-tightly sealed by a sealing sleeve made of stainless
steel.
CableThe resistant PUR sheating is extremely durable. It is
available in various combinations of diameter and cross sections as
follows:• Ø14: 35mm²• Ø20: 50mm²; 95mm²• Ø25: 95mm²• Ø28: 120mm²•
Ø29: 150mm²• Ø30: 120mm²; 185mm²• Ø32: 240mm²
Contact head• Contact heads are available made of steel, inox
or
brass as standard.• Due to the eightfold pressing at a pressure
of several
tons a very tight connection to the sheating is obtained. • To
enable a quick changing the contact bulb can also
be produced in a screwable version.
EN
66 67Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
All cover systems can be opened and closed manually or
automatically.
Cover systems
Cover system with L-shaped cover grooveA simple design of a
tightly closing system. This cover system is often used for older
installations. It is suitable for most ranges of products.
Cover system with VK-shaped cover grooveAt present this is the
most widely installed system. Even abrasive and pointed parts will
not enter the groove.
Cover system with V-shaped cover grooveThis system has similar
qualities as the VK-shaped model, but it is only suitable for
delicate, non-abrasive components.
EN
68 69Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
The quality and effectiveness of barrel electroplating is
considerably depending on the kind and size of the perforation.We
offer a wide range of different perforations in order to choose the
perfect one for your applications.
Round perforation The outstanding quality of the barrel material
allows an extremely close perforation. Inner and outer counterbores
resp. milled recesses support the electrolytic exchange, reduce the
drop in voltage in the wall, reduce carry-over losses and prevent
flat components from adhering to the wet barrel.
Special features:• very close hole distance• counterbores on
both sides• as for sticky components overlapping counterbores can
be milled
Slot perforationDue to the overlapping milling of the slots the
stability of the individual plates remains intact. The outstanding
quality of the barrel material allows the very close perforation,
therefore even higher component weights do not present a
problem.
Half-moon perforationAmong all kinds of perforation the
half-moon perforation offers the widest range of products (nails,
screws, coins, punched and bent components, and many more). A
considerably larger perforation space of up to more than 30 per
cent (e.g. in contrast to an equivalent round perforati-on)
guarantees a better electrolytic exchange. By means of special
milling tools plates of up to 20 mm can be easily perforated in the
half-moon version, thus resulting in con-siderably longer service
lives. The conical form on the outsi-de enables both a quick
penetration and a quick draining of the electrolyte.
Long-slot perforationSimilar to the design of the half-moon
perforation, the long-slot perforation offers the same advantages.
It has been developed to replace the sawn slot perforation as the
dimen-sionally stable geometry avoids a widening of the
perforation.
Perforations
EN
70 71Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
For a number of years now, our filter plugs have shown their
worth – not only in the area of barrel technology. Meanwhile, our
filter plugs are also used in filter systems and sieve plates. In
the wide range of perforations and designs, the suitable filter
plug for your application will also be found.
Our perforation system of filter plugs offers these decisive
advantages:
• simple replacement of filter plugs* for an optimal adaptation
to the goods• due to the arched form of the filter plug the
adherence of flat components will be avoided• the filter plug
material reduces voltage drops and carry-over losses• big chamfers
facing outwards provide an excellent exchange of the electrolyte
because of the additional pumping effect.
* The filter plugs cannot be reused afterwards.
A-filter plug product range approx. 40 mm / material: PP
E-filter plug product range approx. 23 mm / material: PP
standard model
concave model
convex model
Filter plugs
Pos. name artikel number
1 0,25 slot 90000100
2 0,4 slot 90064500
3 0,6 slot 90117800
4 1,3 slot 90018400
5 1,3 slot concave 90081800
6 1 x 1 90000400
7 1,75 x 1,75 90070300
8 2 x 2 90000500
9 2 x 2, convex 90000700
10 2 x 2, concave 90037900
11 3 x 3 90000810
12 3 x 3 convex 90000900
13 8 x 8 convex 90018300
14 0,25 slot with 2 x 2 raster 90000300
15 15 half-moon plug 1,3 mm 90823700
Pos. name artikel number
1 0,25 slot 90001300
2 0,4 slot 90019500
3 0,4 x 0,4 90117600
4 1 x 1 90017100
5 1 x 1 convex 90001400
6 2 x 2 90098900
EN
72 73Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Developed for rational plating of small series or small parts,
our small barrel series is frequently used for many different
applications. Easy handling and the low weight of this series allow
for batch weights of up to 13 kg. When a chain hoist is used, the
weight per batch increases to up to 30 kg.
For the standard type, the barrel body is made of
polypropy-lene; however, special designs in other materials are
possible. For example, best results in chemical nickel applications
have been achieved with PVDF barrels.
To reduce carry-over losses to a mini-mum, the entire barrel
body is welded and the seams are smoothed. This prevents the
product from getting caught in the barrel. A special groove
structure at the fronts avoids that flat products stick to the
surface. Owing to the largely dimensioned cover opening, easy
product feed and removal is possible.
The attached cover provides optimal operational safety and easy
handling. Position and shape of the cover are
designed in such a way that not even the smallest particles can
get between cover and barrel body.
To transfer the plating current onto the product, different ways
of contacting can be selected. One example is the classic cable
contact, but also disk contacts, button cont-acts, pin contacts and
many others are possible.
There is also the possibility of network-independent battery
operation with a docking station and equipment with a
pendular unit, reverser unit or vibrating unit. To improve
electrolytic exchange, an additional electrolyte injection pump can
be added.
In short, the small barrel series is the optimal partner for
rational plating. For electronic components, in the jewellery
industry, for small series, subcontracted electroplating, research
and development, the small barrel is a must.
Small barrel aggregates
EN
74 75Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Transport bars
Contact system
Bearing
Barrel carriers
Protective cover
Collector baskets with contact system
Adjustable end walls
Collector basket opening
• transport bars for chain hoists or carriers• motor current
contact system in the carrier - optional
• standard blade contacts• spring-loaded motor current contacts•
cleaning device for clean contact systems• connecting rail for
equipotential – optional• further bars available on demand• vast
programme of standard designs
• liquid-tight plastic sleeve bearing
• torsion-free construction made of steel or stainless steel•
resistant to corrosion due to epoxy resin coating,
pickled and passivated or rubberized• individual carrier designs
possible
• protection for motor and gear units made of PP
• protection against process solvents and vapors
• The contact system is equipped with pin contacts which are set
in midst the collector baskets. These contact pins can be designed
one-sidedly, two-sidedly or continuously. Each one can individually
exchanged.
• The openings of the collector baskets can be designed in
different shapes according to the goods, f.ex. in a hexagonal or
rectangular form. As standard they are designed in a round
shape.
• By removable and adjustable intermediate walls the barrel can
be divided into several usable segments. The adjust-ment of the
intermediate walls is effected by a pressing stick resulting into a
positive insert locking.
• The largely dimensioned collector basket opening (opening
angle 135°) makes it easy to fill the collector baskets.
• SEW gear wheel motor• protection varnish OS3• special designs•
speed control regulation and
swing control system• brake – optional
Barrel drive
Especially designed for bar-shaped flat or round material, these
aggregates can be modified into single or double-barrel aggregates.
The barrel can be divided into several usable segments by
installing removable intermediate walls. These aggregates are
designed for batch weights of up to 300 kg and lengths of up to
2500 mm.
Satellite plating aggregates
EN
76 77Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Rotating racks current-carrying and currentlessRotating contact
systems
Our rotating racks are the perfect solution for components with
unfavourable shapes like blind holes, undercuts or pockets in which
air bubbles can arise. The goods are
separately treated in special devices or alternatively adapted
in baskets to the rack. Therefore an equal treating is possible and
damages are minimized.
Current-carrying rotating contact systems are another range of
application which were designed for the treating of one or two
parts maximum. These rotating contact systems are mainly used in
the field of galvanoforming or hard chrome
processes, f.ex. when embossing rolls or piston rods are
electroplated. Piece weights of several hundred kilograms are not
uncommon here.
EN
78 79Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
These aggregates are manufactured according to customers’
requests. The perforation can be chosen individually. Barrel
carriers and protective covers are manufactured according to
our standard programme. The barrel carriers and bearing bars are
made of stainless steel. You can choose between 1.4301, 1.4401 or
1.4571.
Automatic cover opening andclosingstation (DOS) Cover-opening
processThe cover-opening device automatically brings the
electroplating barrel into the loading and unloading position,
preposi-tions itself and is then fine-positioned. As soon as this
positioning is completed the actual cover-opening process
begins.
Due to the extension of the lifting cylinder the cover-opening
tools are tilted and grip into the recesses of the cover toggles.
The design of the gripping tools guarantees a smooth gripping of
the toggles and a reliable holding of the cover in the
cover-opening device.
As the cover-opening tools are connected by a flat bar, an
identical angle of inclination of each individual tool is
guaranteed at any time.
After the cover has been lifted by the opening device, the
device returns to the initial position together with the cover. The
barrel can now be loaded resp. unloaded without hindrance.
Due to the simple design of this loading and unloading station
the number of movements is reduced to a minimum. This results in a
number of crucial advantages regarding cost-effectiveness,
reliability and service life.
Cover-closing processThe cover is closed in the same way as it
is opened but in reverse order. The device always returns the cover
reliably and precisely to the barrel opening.
Pickling and phosphating barrels made of stainless steel
EN
80 81Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
When designing this innovative conception of an
electro-polishing barrel we paid particular attention to the
quality of the finished goods. Due to the electro-polishing barrel
it has been possible for the first time to electropolish goods of a
maximum volume of 8 litres resp. of a maximum weight of 25 kg with
consistent premium quality.
The advantages of this barrel at a glance• careful processing
using high-quality materials guaran-
tees a long operating life even under extreme conditions.• solid
system construction suitable for the intended
application • a precise and tightly closing cover• user-friendly
operability and operation safety meeting even the highest demands
due to the cover closing system• stable bearings• optimal
electrolyte exchange and minimized carry-over loss by means of
smooth, water- repellent material surfaces and gap-free transfers
combined with a sophisticated perforation system
In case of a barrel filling volume of 80 % (apprx. 8 litres),
the supplied current amounts to apprx. 500 – 600 A at a voltage of
6 – 10 V. The cycle for electro-polishing lasts between 5 and 15
minutes – depending on the condition of the starting material. Due
to the additionally developedcontrol electronics a continuous speed
setting as well as an oscillating operation are possible.
The liquid-tight metal sleeve bearings directly transfer the
current onto the barrel body made of titanium or stainless steel.
The special contact fluid in the inner part of the earing keeps the
contact surfaces clean. This system allows current transmissions of
up to 500 A per side.
The double-walled barrel body and the double-walled central pipe
are absolutely short-circuit resistant. One wall transfers the
anode current, the other one transfers the cathode current.
DriveWe use high-quality gear wheel motors with circuit breakers
for the drive. The motor voltage amounts to 12 V or 24 V direct
current. Moreover, the barrel speed can be continuously adjusted at
the aggregate.
Contact supportFor galvanic current transfer we usually use
blade contacts made of copper which are also suitable for high
currents.
Barrel bodyThe barrel body is made of titanium and stainless
steel 1.4571. The liquid-tight sleeve metal bearing enables a
current transmission of up to 500 A. The special form of the cover
guarantees a gap-free fitting. The cover can be opened and closed
easily by means of the handy rotary toggle.
Transport barThe transport bar for the electro-polishing barrel
has a shackle. On request we can also deliver other types of
transport bars. An adaptation of the bars or of the complete
carrier is possible in most cases.
Electro-polishing barrel
EN
82 83Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
The motor current contact is an important element of a properly
functioning barrel aggregate. Our motor current contacts have
decisive advantages and ensure a trouble-free operation of your
plant.
Advantages:• self-cleaning contact surfaces• very high current
transmission (up to 60 A)• extremely robust and therefore very
reliable• construction convenient for maintenance and repair
Plastic receptions are mainly manufactured from PE or PP. You
can choose between our low-priced standard receptions or a version
designed to your requirements.
Because of our 5-axis CNC centres we are also capable to
manufacture complex shapes. A sample or sketch will do in most
cases.
This ‘barrel within a barrel’ can be used for galvanising small
batches by simply placing the tube barrel body inside the existing
barrel. The body is made of PP grey and is equipped with screws
with stainless steel cap nuts as contacts. There are two sizes
available with internal diameters of 50 mm and 100 mm. The length
can be specified by you.
Regarding the barrel body with an internal diameter of 100 mm,
the contacts are also fitted at the front side. The standard
perforation is round with a diameter of 6 mm. Special perforations
and special forms are available on request.
Motor current contact
Plastic receptions
Tube barrel body
EN
84 85Personal advice and orders: phone +49 23 71 / 15 75-0 or
e-mail: [email protected] Ideas for electroplating and
high-current!
Plating Barrels & Aggregates
-
Our gearwheels are completely manufactured by us, be it single
pieces or small batch series. Our range varies from driving
gearwheels for small barrel aggregates to groups of gearwheel
series consisting of several parts.
They are mainly made from PE 1000, but it is also possible to
manufacture them of PE 500, PP, PPs, stainless steel or many other
materials. They can also be made combining plastic and metal.
Gearwheels High current contacts & cleaning devices
86
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high current!
-
Our surface contacts impress by their simple construction. Due
to a solid welded construction made of high-quality stainless
steel, they have a durable and trouble-free working life. The
contact plates are pressed by insulated springs to the contact
surfaces under high pressure
enabling an ideal current transmission. Connection is effected
by means of simple connection cables directly onto the contact
plates. Therefore no extra conductor lines are necessary when the
goods are moved. They are solid, easy to maintain, cost-efficient
and self-cleaning.
Surface contacts
Compression springs• insulated compression springs made
of stainless steel for constant pressure• anti-corrosion coating
- optionalMonitoring
• monitoring of contacts by tempe-rature sensors PT100 –
optional
Protective covers• protective covers made of
1.4301 to shield off falling dirt
Solid stainless steel construction• support console made of
1.4301 with solid guide
rails in form of a welded construction• optionally made of
1.4571, coated or with additional
guide rails made of PE
Connections• straight or angled to connect
conductor lines easily
Replaceable contact plate• easily replaceable contact plates
with wiper
grooves for self-cleaning when running in
88 89
1500 A 3000 A
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
Pneumatic design Pneumatic contacts are only applied when high
currents, little space or low input weights present a challenge.
The contact pressure is reached by using vulcanized pressure bags.
There are hardly any limits regarding pneumatic surface contacts.
You will often find them with an output of 20 kA and more. Due to
an additional instalment of a water cooling the power output can be
increased at any time. The costs are relatively high, however, you
gain a maximum process reliability.
Water-cooled design If you want to increase the power output of
the surface contact, we can recommend the water-cooled design as it
does not need more space. By using a water-cooled surface contact
the maximum power output can be increased by up to 35 % depending
on the cooling capacitiy. The water cooling is installed inside the
connection plates. We also recommend installing PT 100 temperature
sensors to monitor the contacts ideally. So a safe operation of the
contacts is always guaranteed.
Pneumatic pressure bags• pneumatic drive using
vulcanized pneumatic pressure bags
Compression springs• insulated compression springs made
of stainless steel for constant pressure• anti-corrosion coating
- optional
Insulation plate• insulation plate made of PPs or
HGW to protect the pneumatic pres-sure bag against heat
exposure
Water cooling• water cooling to increase
capacity - optional
Contact plates• easily replaceable contact plates
with wiper grooves for self-cleaning when running in
Protective covers• protective covers made of
1.4301 to shield off falling dirt
Connections• straight or angled to
connect conductor lines easily
Support console• support console made of 1.4301 with solid
guide rails in form of a welded construction• optionally made of
1.4571, coated or with
additional guide rails made of PE
Monitoring• monitoring of contacts by
temperature sensors PT100 – optional
Surface contacts with pneumatic drive and water cooling
90 91
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
Each contact system can be individually adjusted to any
installation. All our systems are tested in practice. Depen-ding on
the version a power multiplication is possible.
Easy refitting of existing contact system
prism reception
contact sword reception
round-pivot reception
V-shaped reception
Finger contacts with several spring-loaded single fingers enable
a good contact even when the contact surface at the carrier is not
smooth. Ideally the contact fingers are
equipped with wiper grooves to clean off loose dirt when the
carrier enters. To tie the movable elements to the basic body foil
tapes are used.
Using a pressure bag for the pneumatic finger contacts it is
possible to increase the contact pressure in order to reach a
better contact. Especially in existing installations the
contact
surface of the carrier is often uneven. In this case it is
advisable to opt for contacts with pneumatic fingers.
Finger contacts
Pneumatic finger contacts
92 93
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
Special designs and receptions
Bolt contactsAt the early stages of automation technology, bolt
contacts were often used in electroplating plants. Today, they are
still used for contacting extendable anodes and in electrolytic
cells. The base body is made of brass and can be mounted directly
onto the connecting rail. So unnecessary connec-tions are no longer
required.
Inside the contact there are spring-loaded bolts linked to
contact strips. The power output of the maximum current depends on
the number of contact bolts. Each bolt is capable of transferring
apprx. 400 A. In most cases, however, we recommend to apply a
cost-efficient high current surface contact.
Brass receptions have been in use for more than 100 years. In
the early years of electroplating only bent spring contacts were
used next to brass receptions. In case of lower currents of up to
500 A these contacts are still sufficient today.
Low costs and good mechanical qualities are advantageous.
Unfortunately, they are not self-cleaning and are therefore subject
to constant care.
We do not produce our contacts only for the electroplating
industry. Special designs are also applied in maintenance
facilities for trains, quick-change systems for pressing tools,
vacuum furnaces, test facilities, recycling plants and special
plants for astronautics.
Wherever high currents have to be transferred safely, our
special contact systems are the fitting solution. In this respect
each project will be intensively planned together with you until a
useful and working solution has been found.
Sliding contacts are often applied in the conductor board
electroplating industry because you will only find low insert
weights there. Using sliding contacts requires a high accuracy when
inserting and a precise position of the
contacts. Due to their limited compensating possibilities, they
are not suitable for vats with 3 or 4 contact areas. Sliding
contacts as well as brass receptions do not have a ‘self-cleaning
effect’.
Special contact systems
Sliding contacts
Brass receptions
94 95
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
Although there was already talk about this 90 years ago, it is
still being neglected many times today. Only clean contacts can
work efficiently.
To support your staff, we recommend cleaning devices at the
rinsing tanks. These cleaning devices work independently of the
plant operator. The contact surfaces of the carrier are cleaned
during each cycle.
The simple and solid construction pays off here, too. The
brushes can be changed individually. Cleaning devices can be
optained for each type of contact (sword, pivot, prism, etc.) In
most cases the cleaning devices can easily be changed for the
existing plastic receptions.
Cleaning devices
‘Beginners often overlook to keep the wires and contacts clean.
But this is of vital importance for the power circuit and thus for
the plating process.’
Dr. W. Pfanhauser, Galvanotechnik, 1928
Solid inox construction • made of 1.4301• hole pattern of the
fixing holes according
to your demands
Individually changeable strip brushes• The strip brushes can
directly be changed at the tank,
it is not necessary to remove the cleaning device.
Spring-loaded holdingblocks made of PE 1000• for mounting the
strip brushes• to receive the strip brushes the holding blocks
can be adjusted via the inner hexagon screws
96 97
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
We recommend using highly flexible connecting cables when
connecting high current contacts or rectifiers. We produce these in
different designs and cross sections according to your demands.
These cables can be produced either of crimped copper braids and
connecting flange or cable lug. According to your range of
application and operation site the connecting cables are equipped
with protective hoses of various materials like PVC, silicone or
PUR before they are tightly crimped. We gladly advise you which
cable suits your needs best.
Connecting cables and conductor lines
Plastic receptions
Copper rail connectionsAccessories
Our plastic receptions are mainly manufactured from PE or PP.
You can choose between our low-priced standard receptions or a
version designed to your requirements.Because of our 5-axis CNC
centres we are also capable to manufacture complex shapes. A sample
or sketch will do in most cases.
Making use of modern and professional piercing and bending
technology we are able to produce and install copper rail
connections on your premises. The raw material will be cut, pierced
and bent on-spot to guarantee a precise adjustment to the operation
site.
On request all copper rail connections will be delivered
including assembly material, insulation and coverings.
Normally it is also possible to modify existing connections or
exchange individual segments without problems.
Together with our contacts or module components you will receive
everything for the way from the rectifier to the reception from one
provider. Thus a maximum compatibility can be expected.
98 99
ENHigh-Current Contacts
Personal advice and orders: phone +49 23 71 / 15 75-0 or e-mail:
[email protected]
Ideas for electroplating and high-current!
-
Module components
Accessories
Module components consist of ready pre-assembled tank rim
equipment. This means that (plastic) receptions, high current
contacts, motor current contacts and cleaning devices are assembled
onto plastic plates according to your
requirements. These module components can be fastened with
screws or welded as a unit. So a troublesome arrange-ment of all
single components is avoided.
Anode basketsWe deliver anode baskets in various sizes and
designs. Their shape and way of fixing will be made according to
your needs. We can also design them easily according to freehand
sketches and samples.
Our long-lasting contact cables are made of PUR sheating as
standard. This sheating especially made for us is availablein
different diameters and cross sections. It is also possible to
produce them of PVC, silicone and neoprene. Our contact heads are
available made of steel, brass, stainless steel or
special materials like titan or copper. They can be designed in
various versions: hollow, screwable, continuous or further designs.
Ask for personal advice to enhance the durability of this item
subject to wear.
Cable contacts
Rack technologyNext to the classic high current contacts and
barrel aggrega-tes we also offer conventional components of rack
technolo-gy. They comprise rack clips with pressure frame ‘Lipfix’,
anode clips, rack fastener and holding blocks. We provide you with
all necessary components for your c