Type Approval Certificate This is to certify that the undernoled product(s) haslhave been tested in accordance with the relevant requirements of the GL Type Approval System. Certificate No. 20 778 -04 HH Company TEMAC as. hlymburska 53 28913 Zverinek, CZECH REPUBLIC Product Description FLAT GASKETS NON ASBESTOS Environmental Category Technical Data I Range of Application Test Standard Documenfs Remarks Valid until Page File No. Hamburg, nischer TEMAFAST, TEMAFAST ECONOMY, TEMASIL, TEMAPLUS, TEMAFLEX rn '*.W - - ?I c\1* None $2 Compressibility Recovery TA (continued) TEMAFAST 1 .6-1.9 [srunq { DIN 28080-2 } 10%-25% { ASTM F 36 J ) +SO%{ASTMF36J) Gas leakage c0.l [mg/(sxm)] { DIN 3535-W989 ) Thickness increase ASTM F 148 IRM 903 Oil 5h1150°C ASTM Fuel B 5h123"C <5 PI 40 I%] RANGE OF APPLICATION The gaskets may be used under consideration of the mechanical and physical properties as welt as ?he chemical resistance as follows: Ship's piping systems excluding cargo lines on Chemical and Gas Tankers carrying propylene oxide and mixtures of ethylene I propylan oxide. Maximum allowable working mure and temperature according to the spe- cification of the manufadurer. ASTM, DIN and other recognized test standards + Technical Data Audit Report None Lloyd *;y - :: f , .3 Type Hanspeter Raschle ' ,:.i:.,3 Peter Gie$an This certificale is issued on the basis of "Guidslines for the Performance of Type Approvals Palt 1, Procedure".