CT USA | 800.222.7446 | www.gspinc.com ® New Features Included in OMEGA 5.0 Gerber OMEGA ™ 5.0 empowers the beginner and propels the expert. New Raster to Vector Capabilities New conversion features smooth the rough spots in low-res images for quicker, more accurate vector conversions. Also, get truer conversions on small objects. GSPPlot Weed Sectioning/Weedlines Automatically sections background vinyl for faster, easier weeding. Composer Nesting Move and rotate objects to reduce the amount of material used. Print-to-Cut Auto- Alignment using the EDGE and enVision™ 375 Automatically position the plotter knife to the target at the beginning of an EDGE job and skip the manual alignment. Distort Gradient Fills Use Tools>Distortion to make radial and linear fills conform to distorted objects. Perf Cut Output user selected vectors as perforation patterns, making it easy to separate a decal from the background liner. Faster Composer Selection/Redraw Large files - with 20,000 to 100,000 objects or more - draw, redraw, click-and-drag select, show filled and zoom/unzoom much faster. Depending on the size and makeup of the file, the times have been reduced from minutes to seconds. PLUS! Optical Character Recognition (OCR) lets you scan and go. No retyping required. New Fonts! Interim-Approval Federal Highway Administration fonts are included with Omega 5.0. SPLView Preflight Enhancements SPLView shows the exact print data and cut data that is sent to the EDGE and plotters. SPLView now includes EDGE color registration tools and lets the user choose colors to be output from the SPL files.