GENERAL CATALOG 2009 - 2010istudent.kpi.ua/wp-content/uploads/2015/02/catalog.pdf · 6 GENERAL CATALOG 2009-2010 ... Instruments of Precision Mechanics ... D.I. Mendeleyev, I.I. Sikorsky,

GENERAL CATALOG 2009 - 2010

KYIV - UKRAINE

National Technical University of Ukraine “Kyiv Polytechnic Institute”

Ministry of Education and Science of Ukraine National Technical University of Ukraine

“Kyiv Polytechnic Institute”

General Catalog of Specialities

of National Technical University of Ukraine “Kyiv Polytechnic Institute”

Kyiv, Ukraine – March 2010

General Catalog of Specialities of National Technical University of Ukraine

“Kyiv Polytechnic Institute”/ Edited by: D.Sc, Prof. Ganna Vlasyuk – 2. revised edition, - K.: PPC “Polytechnika”, 2010- 625p.

In General Catalog of Specialities of National Technical University of Ukraine

“Kyiv Polytechnic Institute” in English the brief information about institutes, faculties, graduating departments is represented. General Catalog contains academic curricula of specialities. On its basis the training for Bachelor’s, Specialist’s and Master’s Degrees is provided.

Edited by the Dean of the International Faculty of NTUU “KPI” D.Sc, Prof. Ganna Vlasyuk Responsible for publication: PhD, Assist. Prof. V.I. Prokhorov Reviewer: D.Sc, Prof. V.I. Tymofeyev Translator: O.V. Kalinina Computer makeup: P.O. Khandryga O.I. Korinets

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE”

___________________________________________________________________________ www.kpi.ua 3

CONTENTS

INTRODUCTION

Welcome to National Technical University of Ukraine “Kyiv Polytechnic Institute” ....................................................................................................................... 11

About System of Higher Education in Ukraine and at National Technical University of Ukraine “Kyiv Polytechnic Institute”. ................................................ 14

Structure of University Curricula and Training Prog rams..................................... 15

International Faculty................................................................................................... 16

Pre-Admission Department........................................................................................ 18

ACADEMIC UNITS

1. Educational Scientific Complex “Institute of Applied System Analysis”...................................................................................................................... 21

• Informatics

� Social Informatics (B-S-M)........................................................................... 23

• System Analysis

� System Analysis and Management (B-S-M)................................................ 28

• Computer Sciences � Intellectual Systems of Decision Making (B-S-M)....................................... 33

� Information Technologies of Design (B-S-M).............................................. 38

2. Educational Scientific Institute of Telecommunication Systems............... 43

• Telecommunications � Telecommunication Technologies (B-S-M).................................................. 45 � Telecommunication Systems and Networks (B-S-M).................................. 49 � Information Communication Networks (B-S-M)........................................ 53

3. Institute of Mechanical Engineering................................................................ 61

• Applied Mechanics � Dynamics and Strength of Machines (B-S-M)............................................. 63

• Mechanical Engineering

� Production Engineering (B-S-M)................................................................. 67 � Machine Tools and Machinery Systems (B-S-M)........................................ 71

� Intellectual Property (S)................................................................................ 75

� Production of Cutting Tools (B-S-M).......................................................... 76 � Equipment for Materials Processing with Pressure (B-S-M)..................... 81 � Materials Processing with Special Technologies (B-S-M).......................... 85


___________________________________________________________________________ 4 GENERAL CATALOG 2009-2010

� Hydraulic and Pneumatic Machines (B-S-M)............................................. 89

4. Institute of Physics and Technology................................................................. 93

• Applied Physics

� Applied Physics (B-S-M)............................................................................... 95

• Applied Mathematics

� Informatics (B-S-M)...................................................................................... 100

• Security of Information and Communication Systems

� Information Security in Computer Systems and Networks (B-S-M)........ 107

• Systems of Technical Information Protection � Information Protection with Restricted Access and Its Automated

Processing (B-S-M)......................................................................................... 112

5. Institute of Energy Saving and Energy Management.................................. 117

• Electric Power Engineering and Electrotechnics � Electrotechnical Systems of Electric Power Supply (B-S-M)..................... 118

� Energy Management (B-S-M)....................................................................... 122

• Heat Power Engineering

� Energy Management (B)................................................................................ 127

• Ecology, Environmental Protection and Balanced Nature Management � Ecology and Environmental Protection (B-S-M)........................................ 129

• Mining � Underground Mine Development of Mineral Deposits (B-S-M)................ 135 � Mine and Underground Construction (B-S-M)........................................... 139

• Electromechanics � Electromechanical Systems of Automation and Electric Drive (B-S-

M) ..................................................................................................................... 144 � Electric and Mechanical Equipment for Power-Consuming Productions

(B-S-M)............................................................................................................ 149

6. Institute of Publishing and Printing................................................................. 157

• Fine Art � Fine Arts and Decorative Applied Art (B-S)................................................ 159

• Publishing and Editing

� Publishing Trade and Editing (B-S)............................................................. 162


___________________________________________________________________________ www.kpi.ua 5

• Management

� Management of Enterprises (B-S-M)........................................................... 166

• Mechanical Engineering � Printing Machines and Automated Complexes (B-S-M)............................ 172

• Publishing and Printing Business

� Prints Technology (B-S-M)........................................................................... 177 � Packaging Development, Production and Design Technology (B-S)......... 182 � Technology of Electronic and Multimedia Editions (B)............................. 186 � Computer Technologies and Systems of Publishing and Printing

Production Systems (B-S-M)......................................................................... 190 � Materials for Publishing and Printing Productions (B).............................. 196

7. Faculty of Physical Engineering........................................................................ 201

• Engineering Material Science

� Physical Material Science (B-S-M)............................................................... 202 � Composite and Powder Materials, Coatings (B-S-M)................................. 208

� Material Science (B-S-M).............................................................................. 214

• Foundry � Foundry of Ferrous and Non-ferrous Metals (B-S-M)............................... 220

• Metallurgy

� Special Metallurgy (B-S-M).......................................................................... 226

8. Faculty of Chemical Engineering...................................................................... 231

• Ecology, Environmental Protection and Well-Balanced Exploitation of Natural Resources

� Ecology and Environmental Protection (B-S-M)........................................ 232

• Chemical Technology � Chemical Technology of Woodworking and Vegetable Raw Materials

(B-S-M)............................................................................................................ 236

• Mechanical Engineering � Equipment of Forestry Complex (B-S-M).................................................... 240 � Equipment of Chemical Productions and Factories of Constructional

Materials (B-S-M).......................................................................................... 244

• Engineering Mechanics � Machines and Packaging Technology (B-S)................................................. 250


___________________________________________________________________________ 6 GENERAL CATALOG 2009-2010

• Automation and Computer-Integrated Technologies � Automated Control of Technological Processes (B-S-M)........................... 253

9. Faculty of Chemical Technology....................................................................... 259

• Chemical Technology � Chemical Technology of Organic Substances (B-S-M)............................... 260 � Chemical Technology of Inorganic Substances (B-S-M)............................ 264

� Technical Electrochemistry (B-S-M)............................................................ 268 � Chemical Technology of High Temperature Non-Metallic and Silicate

Materials (B-S-M).......................................................................................... 272 � Technology of Polymers Treatment (B-S-M)............................................... 276

• Automation and Computer-Integrated Technologies � Computer-Integrated Technological Processes and Productions (B-S-

M) ..................................................................................................................... 281

10. Faculty of Heat Power Engineering............................................................... 287

• Heat-Power Engineering

� Heat-Power Engineering (B-S-M)................................................................ 288

� Heat Power Stations (B-S-M)....................................................................... 293

� Thermophysics (B-S-M)................................................................................ 297

• Atomic Power Engineering

� Atomic Power Engineering (B-S-M)............................................................ 302

• Power and Mechanical Engineering

� Boilers and Reactors (B-S-M)....................................................................... 307

• Automation and Computer-Integrated Technologies � Automated Control of Technological Processes (B-S-M)........................... 311 � Computer-Integrated Technological Processes and Plants (B-S-M)......... 315

• Computer Sciences � Computer-Aided Technologies of Designing (B-S-M)................................ 319 � Computer Ecological and Economical Monitoring (B-S-M)...................... 323

• Software Engineering � Software of Automated Systems (B-S-M).................................................... 327

11. Faculty of Electric Power Engineering and Automatics............................ 331

• Electrical Engineering and Electrotechnology

� Electric Power Stations (B-S-M).................................................................. 332


___________________________________________________________________________ www.kpi.ua 7

� Electrical Systems and Networks (B-S-M)................................................... 337 � Equipment and Electrophysics of High-Voltages (B-S-M)......................... 341 � Control Systems of Production and Electrical Energy Distribution (B-

S-M)................................................................................................................. 346 � Non-Traditional Energy Sources (B-S-M)................................................... 350

• Electromechanics � Electromechanical Systems of Automation and Electric Drive (B-S-

M) ..................................................................................................................... 354 � Electric Machines and Devices (B-S-M)....................................................... 358

12. Faculty of Informatics and Computer Engineering.................................... 363

• Computer Sciences � Information Control Systems and Technologies (B-S-M).......................... 364

• System Engineering � Systems of Control and Automatics (B-S-M)............................................... 370 � Flexible Computerized Systems and Robotics (B-S-M).............................. 376

• Computer Engineering � Computer Systems and Networks (B-S-M).................................................. 383

13. Intercollegiate Faculty of Medical Engineering........................................... 387

• Computer Sciences � Information Control Systems and Technologies (B-S-M).......................... 388

• Instrument Engineering � Medical Devices and Systems (B-S-M)......................................................... 394

• Physical Education

� Physical Education (S)................................................................................... 399

• Human Health � Physical Rehabilitation (B-S)........................................................................ 400

14. Faculty of Applied Mathematics...................................................................... 405

• Applied Mathematics � Applied Mathematics (B-S-M)...................................................................... 406

• Computer Engineering � Computer Systems and Networks (B-S-M).................................................. 410

� System Software (B-S)................................................................................... 414 � Specialized Computer Systems (B-S-M)....................................................... 417


___________________________________________________________________________ 8 GENERAL CATALOG 2009-2010

• Software Engineering � Software for Automated Systems (B)........................................................... 421

15. Faculty of Physics and Mathematics.............................................................. 423

• Physics

� Physics (B-S-M).............................................................................................. 424

• Mathematics

� Mathematics (B-S-M)..................................................................................... 428

16. Faculty of Radio Engineering........................................................................... 433

• Radio Engineering

� Radio Engineering (B-S-M)........................................................................... 434 � Radio Engineering Devices, Systems and Complexes (B-S-M).................. 438 � Radio Communication, Broadcasting and Television Equipment (B-S-

M) ..................................................................................................................... 442

• Radio Engineering Devices � Manufacturing of Electronic Facilities (B-S-M).......................................... 446 � Biotechnical and Medical Devices and Systems (B-S-M)............................ 452 � Electronic Household Appliances (B-S-M).................................................. 457

17. Faculty of Welding.............................................................................................. 463

• Welding � Welding Technology and Equipment (B-S-M)............................................ 464 � Welding Industrial Systems (B-S-M)............................................................ 469 � Technology and Equipment of Restoration and Wear Resistance

Increase of Machines and Constructions (B-S-M)....................................... 474

18. Faculty of Aircraft and Space Systems.......................................................... 479

• Metrology, Information and Measurement Technologies � Information and Measurement Systems (B-S-M)....................................... 480 � Metrology and Measurement Technology (B-S-M).................................... 484

• Aircraft and Rocket Construction � Aircrafts and Helicopters (B-S-M)............................................................... 489

• Avionics � Operating Systems of Aircrafts and Complexes (B-S-M)........................... 493


___________________________________________________________________________ www.kpi.ua 9

19. Faculty of Electronics......................................................................................... 497

• Micro and Nanoelectronics � Microelectronics and Semiconductor Devices (B-S-M).............................. 498 � Physical and Biomedical Electronics (B-S-M)............................................. 503

• Electronic Devices and Systems � Electronic Devices and Equipment (B-S-M)................................................ 508 � Electronic Systems (B-S-M)........................................................................... 512

• Radio Engineering Devices � Manufacturing of Electronic Facilities (B-S-M).......................................... 516

• Acoustotechnics � Acoustics Facilities and Systems (B-S-M).................................................... 520 � Medical Acoustic and Bioacoustic Devices and Units (B-S-M).................. 524 � Video, Audio and Cinetechnics (B-S-M)...................................................... 528

• Telecommunications � Telecommunication Systems and Networks (B-S-M).................................. 533

20. Faculty of Instrument Making......................................................................... 539

• Instrument Making � Instruments of Precision Mechanics (B-S-M).............................................. 540 � Scientific, Analytical and Ecological Instruments and Systems (B-S-

M) ..................................................................................................................... 544 � Instruments and Systems of Non-Destructive Testing (B-S-M)................. 548 � Technology of Instrument Making (B-S-M)................................................ 552 � Medical Instruments and Systems (B-S-M)................................................. 556

• Optotechnics � Laser and Optoelectronic Technics (B-S-M)............................................... 560

21. Faculty of Management and Marketing........................................................ 565

• Economical Cybernetics � Economical Cybernetics (B-S-M).................................................................. 566

• International Economics � International Economics (B-S-M)................................................................. 570

• Economics of Enterprise � Economics of Enterprise (B-S-M)................................................................. 573


___________________________________________________________________________ 10 GENERAL CATALOG 2009-2010

• Marketing

� Marketing (B-S-M) ......................................................................................... 576

• Management � Management of Organizations (B-S-M)....................................................... 579 � International Business Management (B-S-M)............................................. 582 � Management of Innovative Activity (B-M).................................................. 586 � Innovative Activity Management (M).......................................................... 589

22. Faculty of Biotechnology and Bioengineering.............................................. 591

• Mechanical Engineering � Equipment of Pharmaceutical and Microbiological Industry (B-S-

M)..................................................................................................................... 592

• Biotechnology � Industrial Biotechnology (B-S-M)................................................................. 598 � Environmental Biotechnology (B-S-M)........................................................ 603

23. Faculty of Linguistics......................................................................................... 609

• Philology

� Translation (B-S)............................................................................................ 611

24. Faculty of Sociology and Law.......................................................................... 615

• Social Science

� Social Work (B-S-M)...................................................................................... 616 � Administrative Management (B-M)............................................................. 620

• Law Science

� Law Science (B-S)........................................................................................... 623

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INTRODUCTION

___________________________________________________________________________ www.kpi.ua 11

Welcome to National Technical University of Ukraine “Kyiv Polytechnic Institute”

(NTUU “KPI”)

Dear Ladies and Gentlemen! Dear friends!

I have the honour to introduce to you one of the oldest and biggest technical universities in Europe and the world – the National Technical University of Ukraine "Kyiv Polytechnic Institute".

It was founded in 1898 on the initiative of scientific-technical circles and entrepreneurs of Russia and Ukraine in response to the needs of industry of the Southern West of the country which developed rapidly at the end of XIX century.

The lives and activities of the world-known scientists – V.M. Kyrpychov, D.I. Mendeleyev, I.I. Sikorsky, S.P. Tymoshenko, S.P. Korolyov, V.M. Chelomey, A.M. Lyulka, M.P. Kravchuk, Ye.O. Paton, B.Ye Paton, S.V. Serensen and many others were closely linked with our university.

Cherishing the traditions of profound fundamental training and its harmonious combination with practical engineering and technical developments of graduates, NTUU “KPI” strives for providing high level training of Bachelors, Masters, Doctors of Philosophy (PhD), Doctors of Sciences (DSc) under the present-day conditions.

Lately great institutional changes have been carried out at the university. 8 new faculties, 9 educational and scientific institutes, 7 research institutes were founded, training in 111 renewed specialities and specializations has been started, an innovative environment the Science park “Kyivska Polytechnika” has been created according to a specially adopted law in Ukraine, the cooperation with the National Academy of Sciences of Ukraine, leading industrial structures of Ukraine and foreign companies has become more intensive. All this has allowed NTUU “KPI” to receive the status of the “research university”.

The organization of the educational process, scientific research, the structure of the university management are constantly improving, the democratization of students’ life has been developing.

Special attention of the staff is paid to the quality of specialists training. The cooperation with the system of secondary education of Ukraine, the work of the Institute of Pre-Admission Education and Vocational Guidance, the Centre of Testing and Monitoring of knowledge, the Polytechnic Lyceum of NTUU “KPI” are called to facilitate the selection of “its entrant” who has the abilities for engineering and technical creative work, scientific research.

The Institute of Post-graduate Education in NTUU “KPI” together with other units of the university is called to realize the “life-long education” principle.


___________________________________________________________________________ 12 GENERAL CATALOG 2009-2010

Taking into account the considerable motivation of the present-day young people to learn foreign languages, in particular English, German, French and others, the Department of Linguistics was opened.

The British Council, Goethe Institute began their activities in Ukraine on the basis of the university. Nowadays the Information Bureau of the German Academic Exchange Service (DAAD) is functioning, a project JICA-KPI “Ukrainian-Japanese Centre” is being implemented, works on the creation of the Ukrainian-Korean IT Centre jointly with KOICA (Korean International Cooperation Agency) are going on, the Ukrainian-Polish Centre was established and other international projects are under way at the university.

All of the aforesaid proves the university openness, its aspiration to be a part of the integration processes characterizing today the science and education area.

At the University there are 19 educational departments, 10 educational-research institutes, 13 research institutes, 17 other scientific subdivisions (design bureaus, engineering centres etc.) and also the branch of NTUU ”KPI” in the town of Slavutych.

45 Academicians and Corresponding Members of the National Academy of Sciences of Ukraine and Academies of different branches of Ukraine, 2 227 Professors, Associate professors, assistants work there, and more than 40 000 students and postgraduates, including foreign citizens from 27 countries of the world, study at the University.

In addition to science and technological departments, the new ones have been opened at the university, namely: Management and Marketing, Law, Sociology, Linguistics, Biotechnology and Bioengineering, Medical Engineering. Now young people in addition to technical specialities have the opportunity to get a second education in humanities or economic field and to become qualified interpreters, managers, lawyers and economists. NTUU "KPI" provides education at the level of the world-known universities by the state order as well as by contractual form of studies.

On the university campus there is a polyclinic for students, the Palace of culture and arts, sports complex. Preparatory Department for foreign students functions at the university where during 10 months applicants study Ukrainian, Russian or English, Mathematics, Physics, Biology, Chemistry and other subjects necessary for further mastering of the university program. The training of foreign students is conducted in Ukrainian, Russian or English.

NTUU "KPI" cooperates fruitfully with 112 technical universities from 36 countries of the world as well as international organizations (EC, EU, UNDP, UNESCO, UNIDO, WIPO, NATO, EDNES, ICSU, CODATA, KOICA, JICA, IAU, EUA, IEEE, Salzburg Seminar); many well-known companies (MOTOROLA, MICROSOFT, CISCO, SIEMENS, FESTO, SAMSUNG, INTEL and others) take part in international educational and scientific projects and programs.


___________________________________________________________________________ www.kpi.ua 13

The Science Park “Kyivska Polytechnika” is to carry out international transfer of technologies and assist in realization of University “spin-offs projects”.

Since December 1, 2007 the first pilot project «Research University NTUU “KPI”» is being implemented. The purpose of this project is to create a new model of a higher educational institution of research type.

NTUU “KPI” participates in some projects of the Black Sea Universities Network (BSUN). BSUN unites 115 higher educational institutions from 11 countries of the Black Sea region: the Republic of Azerbaijan, Republic of Albania, Republic of Bulgaria, Republic of Armenia, Republic of Moldova, Hellenic Republic, the Russian Federation, Romania, Turkish Republic, Ukraine.

In 2008-2010 the Black Sea Universities Network has been headed by the president of the Association Council of rectors of higher technical educational institutions of Ukraine, rector of NTUU “KPI”.

NTUU “KPI” is the leader of higher technical education in Ukraine. It takes part in the development of legislative documents in this field and is the basis for the activities of the Association of rectors of higher technical educational institutions in Ukraine and the Union of scientific and technical intelligentsia, Association of postgraduates.

NTUU "KPI" is among the first universities of Ukraine that joined the community of European Universities and signed the Magna Charta of European Universities (“Magna Charta Universitatum”) in September 2003. It assisted actively in the official joining of Ukraine the Bologna process in 2005 (Bergen, Norway).

In November 2006 the Supercomputer Centre was opened in the university. It is equipped with the most powerful computer in Ukraine. The World Data Centre “Geoinformatics and Sustainable Development” was created at NTUU ”KPI”.

In June 2008 the Central-East-European Institute of Sustainable Development was opened in Slavutych. The main purpose of the Central-East-European Institute of Sustainable Development is specialists training and conducting scientific research in this field.

I hope you will be interested in co-operation with our University.

With respect and best wishes,

Rector M. Zgurovsky


___________________________________________________________________________ 14 GENERAL CATALOG 2009-2010

About System of Higher Education in Ukraine and at National Technical University of Ukraine

“Kyiv Polytechnic Institute”

Higher school in Ukraine has got the developed training, scientific and social infrastructure and it affords an opportunity to every citizen of Ukraine or citizen of any other country to obtain an education of the different levels, to study at proficiency improvement or advanced courses, to study at post-graduate courses or to write doctorate dissertation, to take part in fundamental and applied researches.

The system of higher education in our country has a flexible structure, correspond to the modern trends and tendencies to those in advanced countries recognized by UNESCO, UN Organization and many other international organizations.

Since 1992, the whole system of Ukrainian post-secondary education has been regarded as “Higher Education”.

According to the “Law on Education” of Ukraine, the higher education in Ukraine has several categories of higher educational institutions, which correspond, as a rule, to four levels of accreditation:

Level I Vocation Training Schools Level II Technical Secondary Schools and Colleges Levels III, IV Universities, Academies, Institutes

The levels of accreditation represent the hierarchy of degrees according to the qualification of graduates. There are: Junior Specialist, Bachelor, Specialist and Master. The National Technical University of Ukraine “Kyiv Polytechnic Institute” has the IV level of accreditation. At the University the organization of educational process provides training of higher education specialists of the following levels: Bachelor, Specialist and Master. The basic task of University is training of specialists and masters.

The training of bachelors is the intermediate stage in university education. Bachelor (Level II) - is a graduate who on the basis of completed

secondary education got profound general cultural education, fundamental and professional skills and knowledge to cope with typical professional tasks in a certain branch of national economy, science, engineering. The graduate is given a degree of Bachelor and granted the Certificate confirming the profession (“engineering”, “economics”, “philology”, etc.). The term of training-4 years.


___________________________________________________________________________ www.kpi.ua 15

Specialist (Level III) - is a graduate who on the basis of

Bachelor’s degree got special skills and knowledge, has the primary experience to use it to cope with professional tasks in a certain branch of national economy, science, engineering. The graduate is given a degree of Specialist and granted the Certificate confirming a speciality (e.g., “industrial electronics”, “applied mathematics”, “mechanical engineering”, etc.) and qualification (“engineer”, “economist”, etc.) The term of training of Specialists at NTUU “KPI”-5-5,5 years depending on an educational direction.

Master (Level IV) - is a graduate who on the basis of Bachelor’s

and Specialist’s degrees got profound special skills and knowledge of innovative character, has primary experience to use it and is able to produce new ideas to cope with professional tasks in certain branch of national economy, science, engineering. The educational program is to provide a graduate with knowledge and habits in teaching and research activity. A graduate is given a degree of Master and granted the Certificate confirming the profession. The term of training of Master at NTUU “KPI”-6 years for technical direction and 5,5 years for humanitarian direction.

The Structure of

University Curricula and Training Programs Four-year program of bachelor’s degree is intended for 139 weeks of

theoretical training but proceeding from 54-hour training weeks, it has 7506 hours.

Training program of specialist of technical specialties at NTUU “KPI” is intended for one year and a half. It contains 35 training weeks, i. e. 1890 hours (2 semesters) and 26 weeks of pregraduation practical training and thesis projecting (including graduation thesis defending).

The program oriented on one year (not for engineers) consists of one academic semester (18 weeks or 972 hours) and 20 weeks for thesis writing and practical training.

The program of master’s training based on a bachelor qualification includes 2-3 academic semesters (1-2 semesters-on the basis of a specialist qualification ) at 18 weeks each of them, examinations according to individual plan and 1 semester for the completion of scientific researches, graduation thesis preparation and its execution.


___________________________________________________________________________ 16 GENERAL CATALOG 2009-2010

If the part-time education is provided, the program of bachelor training includes 9 academic semesters and the program of a specialist training is oriented on 3 academic semesters and 21 weeks of pregraduation practical training and thesis projecting.

The subjects of curricula are classified in following way: • Humanitarian, social and economic subjects; • fundamental subjects; • professionally oriented subjects; • specified subjects.

The subjects are divided in consecutive order: normative subjects, subjects under the educational professional program, subjects at the educational institution’s option.

The selective subjects of the additional training are studied as methods of self-instruction. Lectures in these subjects cover around 1/3 part of total hours allotted for the compulsory subject.

The educational professional program (EPP) consists of normative and variant parts. The normative part is the list of compulsory scientific subjects and types of practical training. It points out minimum quantity of hours allotted for their studying. The selective educational subjects consist of subjects variety at the educational institution’s independent option and series of subjects at the student’s independent option. The subjects at the educational institution’s option cover the regional needs for defined specialists, experience sharing of specialist training at the educational institution, peculiarities of the scientific schools.

The subjects at the student’s independent option can be oriented on the satisfaction of his educational and cultural needs and obtaining of additional military training, additional fundamental and specified training.

By forming of EPP NTUU “KPI” follows independent determination of the selective educational subjects’ content and list.

In NTUU “KPI” teaching of normative educational subjects of EPP preserves independence of developed working programs in these subjects.

National Technical University of Ukraine “Kyiv Polytechnic Institute” provides Postgraduate and Doctoral study.

International Faculty

One of the main areas of international activity of our University is

teaching of future professionals from many foreign countries. More than 6000 international students from 112 countries have got their Degree at NTUU “KPI”. Among them one can find ministers, diplomats, cosmonauts, prominent scientists and researchers in different spheres of science and technology, and prominent businessmen. NTUU “KPI” is famous for its academic excellence. At the University international students get Diploma Degrees of international standard that are recognized all over the world.


___________________________________________________________________________ www.kpi.ua 17

Since 1992 the Pre-Admission Department helps international students to get ready for the study in Ukrainian universities. During the academic year international students study Ukrainian or Russian languages, and advanced courses of Mathematics, Physics, Chemistry, Biology, Geography, Economics, etc.

To improve the preparation systems of international students in 2005 the International Faculty was established as a part of the Pre-Admission Department. International Faculty includes Ukrainian and Russian Languages Department, Language Preparatory School, Fundamental Subjects Department, Natural Science Subjects department, and Economics department. We are proud of our professor faculty. The dean of the International Faculty is D.Sc., Prof. Anna Grigor’evna Vlasyuk.

International students can get a Degree in any Major studying in Ukrainian or Russian by their choice. International students can get their Degree studying in English only within following academic programs: 2.1. Aircrafts and Helicopters; 10.1. Aircraft Control Systems; 15.1. Computer Systems and Networks; 16.1. Intelligent Decision Making Systems, 29.2. Electronic Systems; 30.1. Mechanical Engineering Technology; 70.1. Control and Automation Systems; and 72.2. Telecommunication Systems and Networks. International Faculty offers post-graduate studying. Since 1992 over 300 international students from 4 continents have got post-graduate degree in our University.

Teaching international students our University is closely collaborating with Higher Education Council of Turkey, Main Company of Oil and Gas "Petrovietnam", company "Interbudmontazh" from Turkmenistan, and many other institutions and companies. International Faculty actively communicates with Alumni Association of Poland, Morocco, Jordan, and other countries.

An integral part of International Faculty’s activity is visa support for international students studying at NTUU “KPI”. All students are accommodated in the student’s hostels. International Faculty actively communicates with embassies, representatives of foreign countries, and foreign citizens who intend to study or improve their professional level at NTUU “KPI”. This helps to achieve University’s integration into international and European academic and research spheres. International Faculty is engaged into system making for operational development of information field as an update mechanism for international activity spread.

International Faculty assists student’s authorities, improves system of international activity, and contributes to the whole democratic international student’s society.

http://inter.kpi.ua

Contact e-mails:

[email protected] [email protected]


___________________________________________________________________________ 18 GENERAL CATALOG 2009-2010

Pre-Admission Department NTUU “KPI” enrolls international students in diverse undergraduate,

specialist and postgraduate degree programs, with an overall number of more then 100 000 alumni from 112 countries. One of the most common programs chosen by international students is the Preparatory Program. The training at the Pre-Admission Department is offered for all Academic Programs. Today the University offers a wide range of 77 Academic Programs (Majors).

International students can get a Degree studying in Ukrainian or Russian within any Academic Program. International students can get their Degree studying in English only within following academic programs: 2.1. Aircrafts and Helicopters; 10.1. Aircraft Control Systems; 15.1. Computer Systems and Networks; 16.1. Intelligent Decision Making Systems, 29.2. Electronic Systems; 30.1. Mechanical Engineering Technology; 70.1. Control and Automation Systems and 72.2. Telecommunication Systems and Networks.

Pre-Admission Department gives students and scholars from many lands a place to live and learn together. Students are accommodated in the student’s hostels. All international students who come to study at NTUU “KPI” are offered one academic year intensive study of Ukrainian language or Russian Language, which will be the main language of teaching, as well as a possibility to improve their knowledge of the main subjects according to the future Degree, e.g. Mathematics, Physics, Chemistry, Biology, Geography, Economics, etc., at the Pre-Admission Department of NTUU KPI.

The academic year begins in September, lasts for 10 months, and is divided into two sessions: Fall and Spring. The Program is made especially for international students. It assists students in all aspects of living and studying in Ukraine. The Program offers:

- Ukrainian or Russian language courses; - General and specialized high school education courses; - Pre-university training; - Design-your-own program (to meet individual special needs of

international students and professionals).

The pre-university basic courses combine Ukrainian or Russian language, and extensive training in skills necessary for the university level in Ukraine. The curriculum includes the practice in lecture comprehension, note-taking, essay and technical writing, text analysis, and library research skills. The faculty has modern equipment for studying; all classes are equipped with computers and language laboratories, special rooms for Russian language learning and Drawing.

Entrance into the Preparatory Program is based on the academic performance. Intending students should have a proven record and/or certificate of complete high school (or higher) education.


___________________________________________________________________________ www.kpi.ua 19

By the course completion students get the certificate for further enrollment to Ukrainian Universities according to the subjects selected. One of the major benefits of the Preparatory Program is an enrollment to the preferred Faculty/Institute at NTUU “KPI” or other University in Ukraine, and an offer of placement in this Faculty/Institute.

If the student of the Pre-Admission Department wants to continue the study in the particular Ukrainian University, NTUU “KPI” will help him/her to meet the criteria and qualifications needed, and will assist with the entire application process.

http://inter.kpi.ua

Contact e-mails:

[email protected] [email protected]

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” EDUCATIONAL SCIENTIFIC COMPLEX “INSTITUTE OF APPLIED SYSTEM ANALYSIS”

___________________________________________________________________________ www.kpi.ua 21

Educational Scientific Complex “Institute of

Applied System Analysis”

Institute of Applied System Analysis was founded in 1997 pursuant to the Decree of the Cabinet of Ministers of Ukraine issued in December 1997. The Institute came into existence by merging the Department of Mathematical Methods of System Analysis at NTUU “KPI” and the Institute of Applied System Analysis at the National Academy of Sciences of Ukraine and the Ministry of Education.

The main goal of educational and scientific activity is the training of new generation system analytics that will determine the life of the country in the 20th century. IASA has double subordination: to the Ministry of Education of Ukraine and to the National Academy of Sciences of Ukraine. This was oriented on the conducting of scientific research in Ukraine, fulfilling and coordination of scientific educational and technical activity in the area of applied system analysis, new information technologies and computer sciences. IASA has three scientific departments: Department of System Analysis Mathematical Methods, of Applied Nonlinear Analysis, Numerical Methods of Optimization. The IASA labor takes part in international programs Tacis, EDNEC, Intas.

IASA has collaboration with IIASA (Austria) in research area of social and economic problems of the state. Due to the active participation of IASA and support of NATO technical committee the work in planning and creation of National computer network of educational and scientific institutions – URAN system is carried out. IASA supports fulfillment of the State scientific program


___________________________________________________________________________ 22 GENERAL CATALOG 2009-2010

“Technological forecast as system of methodology for innovative development of Ukraine” that is carried out together with UNIDO (Austria).

At IASA the international scientific magazine “System analysis and information technologies” is published. All fundamental and applied researches are conducted in tight connection with study process. The results of scientific developments are launched in study process as lectures for students and in such way the education in advance is provided. IASA organizes and takes part in organizing of many scientific conferences and seminars; furthermore it organizes annual International scientific and practical conference of students, graduate students and young scientists “System analysis and information technologies”.

The graduating students of IASA successfully work as system analytics, mathematicians, programmers, economists in institutions of National Academy of Sciences of Ukraine, administrative authorities, in branch scientific and research institutes, in commercial companies and banks.

The high level of IASA specialists training is provided by highly qualified team of teachers and scientists, among them are 1 academician of National Academy of Sciences of Ukraine, 1 corresponding member of National Academy of Sciences of Ukraine, 19 doctors and 29 PhD.

http://ipsa.kpi.ua


___________________________________________________________________________ www.kpi.ua 23

Speciality: Social Informatics

Degree Structure for Bachelor of Informatics

First Year

First Semester Second Semester

Course Title Credit Course Title Credit

Science of Culture 1 Philosophy 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2 Physics 6 Physics 5 Mathematical Analysis 1 6 Mathematical Analysis 2 7 Algebra and Geometry 1 3,5 Algebra and Geometry 2 5,5 Discrete Mathematics 1 3,5 Discrete Mathematics 2 4,5

Programming and Algorithm Languages 1 5


Data Structure and Algorithms 2

Total 30 Total 31,5

Second Year



Foreign Language 2 Philosophy 2,5 Mathematical Analysis 3 6,5 Foreign Language 2

Theory of Probabilities and Mathematical Statistics 1 4 Mathematical Analysis 4 5,5

Ecology 2 Theory of Probabilities and Mathematical Statistics 2 4

Theory of Programming 5,5 Differential Equations 5,5 Computer Graphics 3 Numerical Methods 4

Mathematical Logic and Theory of Algorithms 3,5

Architecture of Computational Systems 3,5

Automata Theory and Formal Languages 3

Algorithms and Complexity Analysis 5

Total 29,5 Total 32


___________________________________________________________________________ 24 GENERAL CATALOG 2009-2010

Third Year

First Semester Second Semester Course Title Credit Course Title Credit

Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2

Foreign Language 2 Information Technologies Hardware 4

Architecture of Computational Systems 3,5 Optimization Methods 3 Numerical Methods 4 Life Safety and Labour Protection 3,5 Object-Oriented Programming 4 Industrial Practical Training 4,5

Optimization Methods 4 Data Bases and Information Systems 4

Applied Statistics 3 Information and Coding Theory 3,5 Data Bases and Information Systems 3

Development and Testing Technologies of Programs 4

Elective Courses Equations of Mathematical Physics 3,5 Control Theory 3

Social Issues of Information Technologies 3

Total 30 Total 36,5

Elective Courses:

Micro- and Macroeconomic Systems 4 Investment Management 3 Basics of Management 3

Total 4 Total 6


___________________________________________________________________________ www.kpi.ua 25

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Random Processes 3 Fundamentals of Management 1,5 Data Bases and Information Systems 3,5 Labour Protection 1,5 Basics of System Analysis for Social Processes 3

Economics and Organization of Production 3

Introduction into Neuronet Methods 2,5

Basics of System Analysis for Social Processes 4

Foreign Language of the Professional Direction 2 Risks in Social Systems 2,5

Foreign Language of the Professional Direction 2

Elective Courses Game and Operations Research Theory 4

Social Problems of Science Development 3

Computer Networks 2,5 Computer Networks 3,5

Investment Management 3 Credits, Finance, Banks and Banking 2

Total 27,5 Total 26,5

Elective Courses:

Artificial Neuronets 3,5 Risks Management 3 Analysis of Hour-long Rows 3,5 Internet Technologies 3 Statistical Analysis of Economic Processes 3

System Analysis of Stochastic Distributed Processes 2

Total 10 Total 8


___________________________________________________________________________ 26 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Social Informatics

Fifth Year



Foreign Language 1 Basics of Marketing 2 Intellectual Property 1 Foreign Language 1

Mathematical Modelling of Social Processes 5 Labour Protection in the Branch 1

Expert Support Systems 3,5 Mathematical Modelling of Social Processes 3,5

3,5 Expert Support Systems 4

Micro- and Macroeconomics 4,5 Basics of Cryptology and Information Protection 2,5

Basics of Cryptology and Information Protection 2

Modern Programming Technologies 4

Developing and Testing Technologies of Programs 3

CISCO Network Computer Technologies 3

Elective Courses

Synergetic Analysis Methods of Social Processes 2

Design of Computer Information Systems 3

Elements of Nonlinear Analysis 2,5

Total 25 Total 27

Elective Courses:

Analysis of Hour-long Rows 2,5 Corporative Finance 2

System Analysis and Intellectual Technologies 3

Total 5,5 Total 2

Sixth Year



Pregraduation Practical Training 12 Graduation Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 27

Degree Structure for Master of Social Informatics

Fifth Year First Semester Second Semester

Course Title Credit Course Title Credit Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1 Mathematical Modelling of Social Processes 4,5 Basics of Marketing 2 Expert Support Systems 3 Labour Protection in the Branch 1

Analysis of Hour-long Rows 2,5 Mathematical Modelling of Social Processes 3

Micro- and Macroeconomics 3,5 Expert Support Systems 3,5 Basics of Cryptology and Information Protection 2

CISCO Network Computer Technologies 2,5

Basics of Cryptology and Information Protection 2,5

Modern Programming Technologies 3,5

Development and Testing Technologies of Programs 2,5

Elective Courses Synergetic Analysis Methods of Social Processes 2

Design of Computer Information Systems 3

Elements of Nonlinear Analysis 2,5 Total 22 Total 26

Elective Courses:

Information Management 1,5 Modelling and Automatization of Business Processes 2

SAP Tools 2,5 Modelling and Automatization of Business Processes 1,5

Total 5,5 Total 2

Sixth Year First Semester Second Semester

Course Title Credit Course Title Credit Science of Patent and Copyright 2 Scientific Research on a Subject 7,5 Philosophic Problems of Scientific Knowledge 1,5 Preparation of Graduation Thesis 25,5 Fundamentals of Scientific Researches 2 Methods of Optimal Control 3,5 CISCO Network Computer Technologies 2,5 System Analysis of World Economics 3,5 Distributed Information Systems 3,5 Information Protection Systems in Computer Networks 3

Information 21,5 Total 33


___________________________________________________________________________ 28 GENERAL CATALOG 2009-2010

Speciality: System Analysis and Management

Degree Structure for Bachelor of System Analysis

First Year


Science of Culture 1 Philosophy 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2 Physics 6 Physics 5 Mathematical Analysis 1 6 Mathematical Analysis 2 7 Algebra and Geometry 1 3,5 Algebra and Geometry 2 5,5 Discrete Mathematics 1 3,5 Discrete Mathematics 2 4,5 Programming and Algorithm Languages 1 5


Data Structure and Algorithms 2 Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 2,5 Mathematical Analysis 3 6 Foreign Language 2 Theory of Probabilities and Mathematical Statistics 1 3,5 Mathematical Analysis 4 5,5

Ecology 2 Theory of Probabilities and Mathematical Statistics 2 4

Mathematical Logic and Theory of Algorithms 3,5 Differential Equations 5,5 Automata Theory and Formal Languages 3,5 Numerical Methods 4,5 Theory of Programming 6 Architecture of Computer Systems 3

Algorithms and Complexity Analysis 4,5

Elective Courses Computer Graphics 3,5

Total 30 Total 31,5 Elective Courses: Credits, Finance, Banks and Banking 3,5

Total 3,5 Total


___________________________________________________________________________ www.kpi.ua 29

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Control Theory 4,5 Architecture of Computational Systems 4 Synergetic Methods of Analysis 3 Numerical Methods 3 Optimization Methods 3,5 Optimization Methods 3 Life Safety and Labour Protection 3,5 Object-Oriented Programming 4 Industrial Practical Training 4,5 Data Bases and Information Systems 3

Data Bases and Information Systems 4

Functional Analysis 4,5 Information and Coding Theory I 3 Random Processes 3

Elective Courses

Equations of Mathematical Physics 3,5 Game and Operations Research Theory 3,5

Total 30 Total 36,5 Elective Courses:

Fuzzy Logic 3,5 Development and Testing Technologies of Programs 3,5

Total 3,5 Total 3,5

Fourth Year First Semester Second Semester

Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Data Bases and Information Systems 4 Labour Protection 1,5 Fundamentals of System Analysis 2 Basics of Management 1,5 Random Processes 3,5 Basics of System Analysis 4,5 Foreign Language of the Professional Direction 2



Elective Courses Control Theory 4 Optimization of Stochastic Models 3 Equations of Mathematical Physics 3,5 Methods of Ellipsoidal Evaluation 2,5 Game and Operations Research Theory 4

System Analysis of Stochastic Distributed Processes 2,5

Mathematical Modelling of Physical Systems 3

Total 30 Total 24 Elective Courses: Game and Operations Research Theory 4

Credits, Finance, Banks and Banking 2,5

Basics of Mathematical Economics 2,5 Investment Management 3,5 Statistical Analysis of Economic Processes 4 Basics of Mathematical Economics 3 Financial Mathematics 3

Total 13,5 Total 9


___________________________________________________________________________ 30 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of System Analysis and Management

Fifth Year


Foreign Language 1 Basics of Marketing 2 Intellectual Property 1 Foreign Language 1 Computational Methods of System Analysis 4,5 Labour Protection in the Branch 1

Expert Systems 5 Computational Methods of System Analysis 4

Mathematical Programming 5 Adaptive Systems of Forecasting and Control 4,5



Integrated Design and Control Systems 3

Modern Programming Technologies 4,5

Fundamentals of Insurance and Risks 3,5

Elective Courses

Synergetic Analysis Methods 2 Design of Computer Information Systems 3

Expert Support Systems 3 Total 26,5 Total 25,5

Elective Courses: Analysis of Hour-long Rows 2,5 Corporative Finance 2 System Analysis and Intellectual Technologies 3,5

Total 6 Total 2

Sixth Year



Pregraduation Practical Training 12 Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 31

Degree Structure for Master of System Analysis and Management

Fifth Year



Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1

Computational Methods of System Analysis 4 Basics of Marketing 2

Expert Support Systems 4 Computational Methods of System Analysis 3,5

Mathematical Programming 4 Labour Protection in the Branch 1


Adaptive Systems of Forecasting and Control 3,5

Integrated Design and Control Systems 2,5

Fundamentals of Cryptology and Information Protection 2

Modern Programming Technologies 4

Fundamentals of Insurance and Risks 2,5

Elective Courses

Synergetic Analysis Methods 2,5 Design of Computer Information Systems 4

Expert Support Systems 3,5

Total 24,5 Total 25

Elective Courses:

Analysis of Hour-long Rows 3 Corporative Finance 3

System Analysis and Intellectual Technologies 4

Total 7 Total 3

Elective Courses:

Information Management 1,5 Modelling and Automatization of Business Processes 2,5

SAP Tools 2,5

Modelling and Automatization of Business Processes 1,5

Total 5,5 Total 2,5


___________________________________________________________________________ 32 GENERAL CATALOG 2009-2010

Sixth Year



Science of Patent and Copyright 2 Scientific Research on a Subject 7,5 Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Basics of Scientific Researches 2 Methods of Optimal Control 4 Information Protection Systems in Computer Networks 3 System Analysis of World Economics 3,5 Distributed Information Systems 3,5

Elective Courses Mathematical Linguistics 3

Total 22,5 Total 33

Elective Courses:

Mathematical Linguistics 3

Total 3 Total

Elective Courses:

Modelling and Automatization of Business Processes 2 Projects Management 3

Total 5 Total


___________________________________________________________________________ www.kpi.ua 33

Speciality: Intellectual Systems of Decision Making

Degree Structure for Bachelor of Computer Sciences

First Year


Science of Culture 1 Philosophy 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2 Physics 5 Physics 5,5 Mathematical Analysis 1 4,5 Mathematical Analysis 2 6 Algebra and Geometry 1 3,5 Algebra and Geometry 2 5 Discrete Mathematics 1 3 Discrete Mathematics 2 5 Programming and Algorithm Languages 1 5

Programming and Algorithm Languages 2 5,5

Engineering and Computer Graphics 3 Data Structure and Algorithms 2

Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 2,5 Mathematical Analysis 3 7 Foreign Language 2 Discrete Mathematics 3 4 Mathematical Analysis 4 5,5 Theory of Probabilities and Mathematical Statistics 1 5

Theory of Probabilities and Mathematical Statistics 2 4

Ecology 2 Numerical Methods 4 Basics of Electrical Engineering and Electronics 4 Computer Circuit Design 5,5

Programming Theory 6 Construction and Analysis of Algorithms 5

Elective Courses Information and Coding Theory 3

Total 30 Total 31,5


___________________________________________________________________________ 34 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2 Architecture of Computational Systems 4,5

Architecture of Computational Systems 4

Data Bases and Information Systems 4,5

Numerical Methods 3,5 Life Safety and Labour Protection 3,5 Object-Oriented Programming 3 Industrial Practical Training 4,5 Data Bases and Information Systems 3 Operational Systems 4 Operations Research. Optimization Methods 1 4,5

Operations Research. Optimization Methods 2 4,5

Information Technologies Hardware 2

Elective Courses Micro- and Macroeconomic Systems 5 Information and Coding Theory 3

Development and Testing Technologies of Programmes 4

Total 30 Total 36,5

Elective Courses:

Micro- and Macroeconomic Systems 5 Theory of Control 3

Modelling and Automatization of Business Processes 4

Total 5 Total 7


___________________________________________________________________________ www.kpi.ua 35

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Basics of System Analysis 2 Labour Protection 1,5 Theory of Decisions Taking in Complex Systems 3 Basics of System Analysis 3 Data Bases and Information Systems 3,5 Computer Networks 2,5 Foreign Language of the Professional Direction 2

Theory of Decisions Taking in Complex Systems 4

Basics of Intellectual Systems Design 1,5

Basics of Management 1,5

Economics and Industrial Engineering 3


Elective Courses

Investment Management 3,5 Credits, Finance, Banks and Banking 2,5

Introduction to Neuronet Methods 2,5 Social Problems of Science Development 2

Statistical Analysis of Economic Processes 4,5 Methods of Ellipsoidal Evaluation 2

Total 25 Total 29

Elective Courses:

Introduction to Neuronet Methods 2,5 Social Problems of Science Development 2,5

Statistical Analysis of Economic Processes 3,5 Methods of Ellipsoidal Evaluation 2 Basics of Mathematical Economics 3,5 Basics of Mathematical Economics 3

Total 9,5 Total 7,5


___________________________________________________________________________ 36 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Intellectual Systems of Decision Making

Fifth Year


Foreign Language 1 Basics of Marketing 2 Intellectual Property 1 Foreign Language 1 Basics of Intellectual Systems Design 4 Labour Protection in the Branch 1

Software of Computer Networks 4 Modern Programming Technologies 4,5

Expert Systems 4,5 Programming of Computer Information Systems 4,5

Computer Information Technologies for Market Economy Objects 4

Development and Testing Technologies of Programs 4

Basics of Accounting and Audit 2 Basics of Cryptology and Information Protection 2,5


Elective Courses Modelling of Transition Economics 3,5 Modelling of Transition Economics 2,5 Vitality of Complex Systems 2 Vitality of Complex Systems 2,5

Total 28 Total 24,5 Elective Courses: Analysis of Hour-long Rows 3,5 Basics of Insurance and Risks 3,5 Case-Methods in Economics and Business 3,5

Total 7 Total 3,5 Elective Courses: Expert Support Systems 2,5 Basics of Insurance and Risks 2,5 Analysis of Hour-long Rows 3 Corporative Finance 2,5

Total 5,5 Total 5

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 37

Degree Structure for Master of Intellectual Systems of Decision Making


Course Title Credit Course Title Credit Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1 Basics of Intellectual Systems Design 4 Basics of Marketing 2 Software of Computer Networks 3 Labour Protection in the Branch 1

Expert Systems 4 Modern Programming Technologies 4

Computer Information Technologies for Market Economy Objects 3,5

Programming of Computer Information Systems 3,5

Basics of Accounting and Audit 2 Development and Testing Technologies of Programs 4


Basics of Cryptology and Information Protection 2,5

Elective Courses Modelling of Transition Economics 3,5 Modelling of Transition Economics 2,5 Vitality of Complex Systems 2 Vitality of Complex Systems 2,5

Total 26 Total 24,5 Elective Courses: Analysis of Hour-long Rows 3,5 Basics of Insurance and Risks 3,5 Case-Methods in Economics and Business 3,5

Total 7 Total 3,5 Elective Courses: Expert Support Systems 2,5 Expert Support Systems 2,5 Analysis of Hour-long Rows 3 Corporative Finance 2,5

Total 5,5 Total 5



Science of Patent and Copyright 2 Scientific Researches on the Subject 7,5

Philosophic Problems of Scientific Knowledge 1,5 Preparation of Graduation Thesis 25,5 Basics of Scientific Researches 2 System Analysis of World Economics 3,5 Distributed Information Systems 3,5 Internet Technologies in Scientific Researches 2 Fuzzy Models and Methods in Decision-Making Systems 3,5 Information Protection Systems in Computer Networks 3,5 Basics of Society's Sustainable Development 2

Total 23,5 Total 33


___________________________________________________________________________ 38 GENERAL CATALOG 2009-2010

Speciality: Information Technologies of Design


First Year


Science of Culture 1 Philosophy 2 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2 Mathematical Analysis 1 6 Mathematical Analysis 2 7 Algebra and Geometry 6 Discrete Mathematics 1 7 Physics 1 4 Physics 2 7 Programming and Algorithmic Languages 1 4

Programming and Algorithmic Languages 2 6

Introduction to Information Technologies 3 Data Structures and Algorithms 3

Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 1 2,5 Mathematical Analysis 3 4 Foreign Language 2 Discrete Mathematics 2 3 Mathematical Analysis 4 4 Theory of Probabilities and Mathematical Statistics 1 4

Theory of Probabilities and Mathematical Statistics 2 4

Ecology 2 Calculus of Approximations 1 4 Basics of Electrical Engineering and Electronics 7 Computer Circuit Design 5

Object-Oriented Programming 3 Modelling and Analysis of Algorithms 5

Theory of Programming 5 Information and Coding Theory 5 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 39

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Computer Architecture 2 3,5 Calculus of Approximations 2 3 Life Safety and Labour Protection 3,5 Computer Architecture 1 4 Data Bases 7 Optimization Methods 6 Industrial Practical Training 4,5 Information Technologies Hardware 5 Operational Systems 3

Technology of Program Systems Design and Testing 4

Elective Courses Digital Signal Processing 4 Digital Signal Processing 2 3 Computational Geometry 3 Analysis of Digital Circuits 4

Total 30 Total 36,5

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Theory of Complex Projects and Systems Computer-Aided Design 7

System Analysis and Information Processing Systems Design 4,5

Data and Knowledge Bases Organization 4 Labour Protection 1,5

Computer Networks 4 Foreign Language of the Professional Direction 2

Economics and Organization of Production 3 Preparation of Graduation Thesis 1,5 Foreign Language of Professional Direction 2

Elective Courses Control and Diagnostics of Information Systems 5

Systems and Technologies of Parallel Calculations 4,5

Theory of Integrated Circuits Design 3,5

Systems and Technologies of Computer Graphics 4,5

Total 29 Total 25,5


___________________________________________________________________________ 40 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Information Technologies of Design

Fifth Year



Foreign Language 1 Foreign Language 1

Basics of Scientific Reseacrh 3,5 Computer Systems of Image and Signal Processing 5

Computer Systems and Networks Design 5

Computer-Aided Design Systems Development 5

Data Bases and Expert Systems Design 5 Intellectual Property 1 Modern Tools of User Interface Programming and Design 5

Economics and Organization of Production 1,5

Design and Management of Information Resources 4 Information Security 3,5 Labour Protection 1 Multimedia Technologies 3 Marketing 1,5 Pregraduation Practical Training 12 Preparation of Graduation Thesis 21

Elective Courses Automatization of Custom LSI Design 4,5

Automatization of EPLD Devices Design 3

Total 30,5 Total 56


___________________________________________________________________________ www.kpi.ua 41

Degree Structure for Master of Information Technologies of Design

Fifth Year


Foreign Language 1 Philosophic Problems of Scientific Knowledge 1,5

Basics of Scientific Researches 3,5 Foreign Language 1 Computer Systems and Networks Design 5

Computer-Aided Design Systems Development 5

Data Bases and Expert Systems Design 5

Computer Systems of Image and Signal Processing 5

Modern Tools of User Interface Programming and Design 5 Multimedia Technologies 3 Design and Management of Information Resources 4 Information Protection 3,5

Labour Protection 1 Economics and Organization of Production 1,5

Marketing 1,5 Intellectual Property 1 Elective Courses

Automatization of Custom LSI Design 4,5

Automatization of EPLD Devices Design 3


Sixth Year


Pedagogics of Higher School 1,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Systems With Distributed Data Bases 5 Special Sections of Information Technologies of Design 3,5 Scientific Researches on a Topic 4,5 Pedagogical Practical Training 3 Preparation of Graduation Thesis 25,5

Total 53 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” EDUCATIONAL SCIENTIFIC INSTITUTE OF TELECOMMUNICATION SYSTEMS

___________________________________________________________________________ www.kpi.ua 43

Educational Scientific Institute of

Telecommunication Systems

Institute of Telecommunication Systems (ITS) was founded in 2002. The Institute includes the following departments: of Telecommunications, of Telecommunication Systems and department of Information and Telecommunication Networks and also the Scientific-research Institute. Scientific activity of Institute is turned to an implementation of the state scientific and technical program “The long-range telecommunication systems and technologies”, scientific projects according to the plans of Ministry of Education and Science of Ukraine and requests of enterprises and organizations in telecommunication.

In ITS students who are going to be the developers of telecommunications and telecommunication systems have the opportunity to study subjects “alive” and use the most contemporary and unique telecommunication equipment, as lecture rooms are used industrial buildings of leading institution in telecommunication branch and scientific laboratories of the Scientific-research Institute. For example, “UkrSat” company provides prosecution of practical and laboratorial studies on various educational courses using a unique acting equipment of satellite communication systems.


___________________________________________________________________________ 44 GENERAL CATALOG 2009-2010

The training of students is carried out on the following specialities:

• Telecommunication Technologies; • Telecommunication Systems and Networks; • Information Communication Networks.

The training of PhDs and doctors is carried out on the following specialities:

• Telecommunication Systems and Networks; • Antennas and Devices of Microwave Equipment; • Radio Engineering Devices and Telecommunications.

At three ITS departments 50 highly qualified teachers are working: 14 professors, 20 associate professors, 17 senior teachers and assistant lecturers.

The graduating students are provided with deep fundamental and special training in basics of radio electronics for management and marketing in communication and television branches. In addition the students will get knowledge in the area of space telecommunication systems and networks that use geostationary and low-orbit spacecrafts.

The graduates carry out the scientific researches and practical development of up-to-date hardware and software in communications and information technologies. That is the systems of information transmission on fiber, radio, on-air and cable communication channels and also digital switching systems with integrated services, telecommunication networks and information security.

http://its.kpi.ua


___________________________________________________________________________ www.kpi.ua 45

Speciality: Telecommunication Technologies

Degree Structure for Bachelor of Telecommunications

First Year First Semester Second Semester

Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2

Ukrainian Language 1 Philosophy-2. Science of Religion, Logic, Ethics and Aesthetics 1

Science of Culture 1 History of Ukraine 1,5 Higher Mathematics-1. Linear Algebra. Differential Equations 7

Higher Mathematics-2. Integral Calculus 7

Physics-1. Electromagnetism 5 Physics-2. Optics, Quantum Electronics 7

Chemistry, Electric and Radio Materials 3

Computer Science-2. Programming Technologies 4

Engineering and Computer Graphics 3

Metrology, Standardization, Certification and Accreditation 3

Computer Science-1. Computer Hardware and Software 6

Theory of Electrical Circles-1. Theory of Linear Circles 4

Special Chapters of Mathematics-1. Discrete Mathematics 2

Elective Courses Introduction to Speciality 2

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics-3 6 Philosophy-1 2,5

Ecology 2 Theory of Electrical Communication-1 3

Technical Electrodynamics and Radio Wave Propagation-1 3


Theory of Electrical Circles-2 6 Special Chapters of Mathematics-1 7

Circuitry-1 4 Telecommunication Networks, its Operation and Connection-1 4

Applied Programming in Telecommunication Systems-1 4

Terminal Equipment of Telecommunication Systems-1 2


Elective Courses Legal and Regulatory Basis of Telecommunications 3

Total 30 Total 31,5


___________________________________________________________________________ 46 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 2 Psychology 1,5 Economic Theory 2

Sociology 1,5 Technologies of Wireless Telecommunication Systems-1 3

Theory of Electrical Communication-2 4 Network Technologies-1 4 Special Chapters of Mathematics-2 6 Life Safety and Labour Protection 3,5 Telecommunication Networks, its Operation and Connection-2 3 Industrial Practical Training 4,5 Terminal Equipment of Telecommunication Systems-2 4

Telecommunication Networks, Its Operation and Connection-3 5

Circuitry-2 5

Transmitting and Receiving Devices of Radio Communication Systems 6

Circuitry-3 4 Elective Courses

Power Supply of Telecommunication Systems 2

Total 29 Total 34

Fourth Year


Basics of Economics and Organization of Electronic Devices Production 3 Science of Law 2 Mechanics 3,5 Political Science 1,5 Foreign Language of the Professional Direction 2 Labour Protection 1,5 Basics of Electronic Devices Production 3,5


Connecting Systems of Telecommunication Networks 1,42

Calculating and Microprocessor Means in Electronic Devices 3

Transmission Systems in Electrical Communication 1,89

Physical and Theoretical Basics of Electronic Devices Designing 3,5

Connecting Systems of Telecommunication Networks 3,08


Preparation of Bachelor's Diploma Project 1,5

Elective Courses Radio Telecommunication Systems 5,56 Radio Telecommunication Systems 2,44 Management of Radio Resource Use 8

Automated Design Means of Telecommunication Systems 3



___________________________________________________________________________ www.kpi.ua 47

Degree Structure for Specialist of Telecommunication Technologies

Fifth Year



Foreign Language 1 Foreign Language 1 Intellectual Property 1 Labour Protection in the Branch 1 Marketing 1,5 Management 1,5

Electric and Optical Cable Transmission Lines 5

Information Security on Telecommunication Networks 4,5

Digital Processing of Signals 4,5 Basics of Telecommunication Networks Operation 1,5

Radio Relay and Troposphere Transmission Systems 5

Algorithm and Software of Telecommunication Networks 3,5

Basics of Satellite Transmission Systems 6

Satellite Telecommunication Technologies 4,5

Basics of Satellite Transmission Systems Design 4,5

Elective Courses

Technologies of Satellite Radio Navigation Systems 4,5 Systems of Customer Access 3

Total 31,5 Total 22

Specialization:

Management in Telecommunication Companies 4,5

Marketing Research of Telecommunication Services Market 4,5

Total Total 9

Sixth Year



Pregraduation Practical Training 12 Preparation of Thesis 20

Total 32 Total


___________________________________________________________________________ 48 GENERAL CATALOG 2009-2010

Degree Structure for Master of Telecommunication Technologies

Fifth Year



Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2 Marketing 1,5 Foreign Language 1 Electric and Optical Cable Transmission Lines 4,5

Mathematical Methods of Optimization 3

Radio Relay and Troposphere Transmission Systems 4,5 Labour Protection in the Branch 1 Digital Processing of Signals 4,5 Management 1,5 Basics of Satellite Transmission Systems 6

Information Security on Telecommunication Networks 4,5

Basics of Telecommunication Networks Operation 1,5

Algorithm and Software of Telecommunication Networks 3

Satellite Telecommunication Technologies 4,5

Basics of Satellite Transmission Systems Design 4,5

Elective Courses Systems of Customer Access 3 Technologies of Satellite Radio Navigation Systems 4,5

Total 30,5 Total 28

Sixth Year


Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Scientific Research on Subject 12,5 Organization of Scientific Researches and Developments in Telecommunication Branch 2 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2

Total 10,5 Total 38


___________________________________________________________________________ www.kpi.ua 49

Speciality: Telecommunication Systems and Networks




Ukrainian Language 1 Philosophy-2. Science of Religion, Logic, Ethics and Aesthetics 1

Science of Culture 1 History of Ukraine 1,5 Higher Mathematics-1. Linear Algebra. Differential Equations 7


Physics-1. Electromagnetism 5 Physics-2. Optics, Quantum Electronics 7





Computer Science-1. Computer Hardware and Software 6

Theory of Electrical Circles-1. Theory of Linear Circles 4



Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics-3 6 Philosophy-1 2,5

Ecology 2 Theory of Electrical Communication-1 3



Theory of Electrical Circles-2 6 Special Chapters of Mathematics 7

Circuitry-1 4 Telecommunication Networks, Its Operation and Connection-1 4


Terminal Equipment of Telecommunication Systems-1 2


Elective Courses Legal and Regulatory Basis of Telecommunications 3

Total 30 Total 31,5


___________________________________________________________________________ 50 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Theory of Electrical Communication-2 4

Technologies of Wireless Telecommunication Systems-1 3

Special Chapters of Mathematics-2 6 Network Technologies-1 4 Telecommunication Networks, Its Operation and Connection-2 3 Industrial Practical Training 4,5 Terminal Equipment of Telecommunication Systems-1 4


Circuitry-2 5 Circuitry-3 4


Elective Courses Power Supply of Telecommunication Systems 2

Total 29 Total 34

Fourth Year


Foreign Language of the Professional Direction 2 Science of Law 2 Transmission Systems in Electrical Communication 2,25 Political Science 1,5 Electric and Optical Cable Transmission Lines 4,5


Connecting Systems in Electric Communication 1,42


Systems of Radio and Television Broadcasting 4


Modern Technologies of Telecommunication Systems 4 Systems of Mobile Communication 4 Programming in Information and Telecommunication Systems 2

Computing Engineering and Microprocessors 3



Labour Protection 1,5 Elective Courses

Operations Research 5 Production Basics of Telecommunication Means 3



___________________________________________________________________________ www.kpi.ua 51

Degree Structure for Specialist of Telecommunication Systems and Networks

Fifth Year


Foreign Language 2 Labour Protection in the Branch 1

Intellectual Property 1 Management of Telecommunication Enterprises 2

Marketing of Telecommunication Enterprises 1,5

Legal Regulation of Communication Enterprises Activity 1,5

Finance of Communication Enterprise 1,5

Radio Relay and Troposphere Transmission Systems 5

Security of Information Resources 4,5

Construction and Design of Satellite Telecommunication Systems 3,06


Optimization Methods in Telecommunication Systems 5

Digital Processing of Signals 5 Theory of Networks and Operation 3 Theory of Networks and Operation 3 Preparation of Thesis 21 Telecommunication Technologies of Information Services in Telecommunication Systems 3

Elective Courses

Systems of Customer Access 1,5

Technologies of Telecommunication Systems Servicing 3

Electromagnetic Compatibility and International Coordination of Radio Communication 3


Sixth Year



Pregraduation Practical Training 12

Total 12 Total


___________________________________________________________________________ 52 GENERAL CATALOG 2009-2010

Degree Structure for Master of Telecommunication Systems and Networks


Course Title Credit Course Title Credit Foreign Language 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2

Marketing 1,5

Legal Regulation of Communication Enterprises Activity 1,5

Security of Information Resources 4 Mathematical Methods of Optimization 3

Construction and Design of Radio Relay Telecommunication Systems 3,22 Labour Protection in the Branch 1

Theory of Networks and Operation 3,61 Radio Relay and Troposphere Transmission Systems 4

Digital Processing of Signals 4


Telecommunication Technologies of Information Services in Telecommunication Systems 3 Theory of Networks and Operation 3,39

Optimization Methods in Telecommunication Systems 5

Elective Courses






Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Organization of Scientific Researches and Developments in Telecommunication Branch 2 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Development of Information Resources and Systems 3 Scientific Researches on the Subject 12 Preparation of Master's Thesis 25,5

Total 51 Total


___________________________________________________________________________ www.kpi.ua 53

Speciality: Information Communication Networks





Ukrainian Language 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1

Science of Culture 1 History of Ukraine 1,5 Higher Mathematics-1. Linear Algebra, Differential Equations 7


General Physics-1. Mechanics. Heat 5

General Physics-2. Electromagnetism. Solid State Physics 7





Computer Science-1. Computer Hardware and Software 6 Theory of Electrical Circles 4 Discrete Mathematics 2


Total 30 Total 31,5


___________________________________________________________________________ 54 GENERAL CATALOG 2009-2010

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics-3. Theory of Probability 6 Philosophy 2,5

Ecology 2

Theory of Electrical Communication-1. Basics of Modulating Signals Theory 3

Theory of Electrical Circles-2. Basics of Non-Linear Circles Theory 6

Technical Electrodynamics and Radio Wave Propagation-2. Aerials 6

Technical Electrodynamics and Radio Wave Propagation-1. Technical Electrodynamics 3


Legal and Regulatory Basis of Telecommunications 3


Circuitry-1. Basics of Discrete Circuitry 4 Information Encoding Systems 2 Applied Programming in Telecommunication Systems-1. Programming Languages of Information and Telecommunication Platforms 4

Applied Programming in Telecommunication Systems-2. Engineering of Internet Oriented Applied Software 5

Elective Courses

Dataware of Telecommunication Networks-2. Software of Databases Making 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 55

Third Year




Sociology 1,5

Technologies of Wireless Telecommunication Systems-1. Basics of Wireless Systems 3

Theory of Electrical Communication-2. Theory of Potential Noise Immunity. Information Theory 4 Life Safety and Labour Protection 3,5 Special Chapters of Mathematics-2. Waiting Theory 5

Network Technologies-1. Basics of Network Technologies 4

Telecommunication Networks, Its Operation and Connection-2 3 Industrial Practical Training 4,5

Circuitry-2. Digital Circuitry 5 Telecommunication Networks, Its Operation and Connection-1 5

Circuitry-3. Basics of Microcircuitry 4

Elective Courses

Dataware of Telecommunication Mobile Networks 4


Power Supply of Electric Communication Systems 2

Total 28 Total 34


___________________________________________________________________________ 56 GENERAL CATALOG 2009-2010

Fourth Year


Foreign Language of the Professional Direction 2 Science of Law 2 Transmission Systems and Lines in Electric Communication 2,11 Political Science 1,5 Connecting Systems in Electric Communication 1,81 Labour Protection 1,5 Systems of Radio and Television Broadcasting 3,5


Modern Technologies of Telecommunication Systems 4

Transmission Systems and Lines in Electric Communication 3,89

Programming in Information and Telecommunication Systems 2 Systems of Mobile Communication 3,5 Dataware of Telecommunication Mobile Networks 2

Computing Engineering and Microprocessors 3,5

Connecting Systems in Electric Communication 2,69


Elective Courses

Operations Research 5 Economics and Organization of Production* 3

Production Basics of Telecommunication Means 3



___________________________________________________________________________ www.kpi.ua 57

Degree Structure for Specialist of Information Communication Networks

Fifth Year


Marketing of Telecommunication Enterprises 1,5

Management of Telecommunication Enterprises 2,5

Finance of Communication Enterprise 1,5

Legal and Regulatory Basis of Telecommunications 1,5


Intellectual Property 1 Construction and Design of Radio Relay Telecommunication Systems 2,28

Construction and Design of Radio Relay Telecommunication Systems 2,72


Security of Information Resources 4,5 Programming of Apparatus Means 3,5 Construction and Design of Satellite Telecommunication Systems 2,5 Theory of Networks and Operation 2,94 Intellectual Information Processing 3,5 Administration Systems of Telecommunication Networks 3,5 Theory of Networks and Operation 3,06 Telecommunication Technologies of Information Services in Telecommunication Systems 3

Elective Courses





Sixth Year



Pregraduation Practical Training 12 Preparation of Graduation Thesis 21

Total 33 Total


___________________________________________________________________________ 58 GENERAL CATALOG 2009-2010

Degree Structure for Master of Information Communication Networks

Fifth Year



Marketing of Telecommunication Enterprises 1,5 Pedagogics of Higher School 1,5 Foreign Language 2 Basics of Scientific Researches 2

Intellectual Property 1 Legal and Regulatory Basis of Telecommunications 1,5



Security of Information Resources 4,5 Labour Protection in the Branch 1



Theory of Networks and Operation 3,06


Administration Systems of Telecommunication Networks 3,5 Theory of Networks and Operation 2,94

Telecommunication Technologies of Information Services in Telecommunication Systems 3 Programming of Apparatus Means 3,5

Intellectual Information Processing 3,5 Elective Courses






___________________________________________________________________________ www.kpi.ua 59

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5

Organization of Scientific Researches and Developments in Telecommunication Branch 2 Scientific Research on Subject 7,5 Science of Patent and Copyright 2

Mathematical Modelling of Systems and Processes 3

Basics of Society's Sustainable Development 2

Automated Design of Telecommunication Networks 4,5

Information and Software Resources in Telecommunication Networks 4

Total 19 Total 33

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INSTITUTE OF MECHANICAL ENGINEERING

___________________________________________________________________________ www.kpi.ua 61

Institute of Mechanical Engineering

Institute of Mechanical Engineering was founded in 1898. Well-known scientists and professors V. Kirpichov, K. Zvorikin, N. Siminsky, S. Timoshenko and others made a great contribution to its foundation.

Today the Institute of Mechanical Engineering (former faculty) consists of 8 departments: department of mechanical-engineering technologies, of tools production, of machine tools and machinery construction, of dynamics and strength of materials, of mechanics for materials plasticity and resource-saving processes, of hydro-aeromechanics and mechanotronics, of laser technology for machine engineering and material sciences and also of technical mechanics. Additionally the IME has 2 scientific laboratories, Certification Center for metal- and wood-working equipment and machinery, Scientific Test Center named “Reliability”. The professors of the IME have a great experience in pedagogical and scientific activities. There are 40 Doctors of Science, Professors, 80 PhDs, associate professors and also more than 60 leading experts.

There was launched training program by speciality “Intellectual property” in 2002-2003.

In 2002 on the basis of Institute of Mechanical Engineering, Faculty of Welding and Faculty of Physical Metallurgy the Joint UkrainIan-German faculty NTUU "KPI" and Otto-von-Guericke University of Magdeburg was established with the purpose of co-education of the specialists on all mechanical engineering specialities.


___________________________________________________________________________ 62 GENERAL CATALOG 2009-2010

Almost 2300 full and part-time students, among them are 80 foreigners, study at IME. Modern technical facilities for study on the basis of computer automatic designing systems provide training of highly skilled specialists.

The annual number of the IME graduates is 350 mechanical engineers. This helps industrial enterprises to launch new ideas into industry.

http://mmi.kpi.ua


___________________________________________________________________________ www.kpi.ua 63

Speciality: Dynamics and Strength of Machines

Degree Structure for Bachelor of Applied Mechanics

First Year



Philosophy (Ethics, Aesthetics, Science of Religion) 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language-1 2 Foreign Language-1 2

Mathematics-4. Linear Algebra. Analytic Geometry 5 Mathematical Analysis 5,5 Mathematical Analysis 4 Physics 5 Chemistry 4 Computer Science-1 4,5

Descriptive Geometry and Computer Graphics 5 Engineering Mechanics 3,5 Computer Science-1 4,5 Material Science 4 General Metalworking Processes 3 Computer Aided Engineering 5

Total 30 Total 31,5

Second Year



Philosophy 2,5 Foreign Language 2 Foreign Language 2 Mathematical Analysis 5 Mathematical Analysis 5,5 Mathematical Physics 5 Physics 5 Physics 2 Engineering Mechanics 4,5 Ecology 2 Strength of Materials 5,5 Engineering Mechanics 3 Basics of Heat Engineering 4 Strength of Materials 6,5

Theory of Mechanisms and Machines 3

Building Mechanics of Machines 3,5

Total 29 Total 32


___________________________________________________________________________ 64 GENERAL CATALOG 2009-2010

Third Year



Economic Theory 2 Sociology 1,5 Foreign Language of Professional Direction 2

Foreign Language of Professional Direction 2

Mathematical Physics 2 Machines Components 2,5 Life Safety and Labour Protection 3,5 Building Mechanics of Machines 4 Theory of Mechanisms and Machines 4 Theory of Elasticity 5 Building Mechanics of Machines 5,5 Technological Practical Training 4,5

Theory of Elasticity 5 Electrical Engineering, Electronics and Microprocessor Technique 2,5

Systems Engineering, Standardization and Measurements 4 Theory of Vibrations 5,5 Electrical Engineering, Electronics and Microprocessor Technique 3

Numerical Methods of Mechanics and Strength of Machines 4

Total 31 Total 31,5

Fourth Year



Science of Law 2 Economics and Organization of Production 2

Political Science 1,5 Management 1,5 Economics and Organization of Production 2,5


Machines Components 3 Theory of Vibrations 4

Labour Protection in the Branch 1,5 Numerical Methods of Mechanics and Strength of Machines 4

Foreign Language of the Professional Direction 2 Theory of Plasticity and Creepage 3 Theory of Vibrations 3 Preparation of Attestation Project 1,5 Numerical Methods of Mechanics and Strength of Machines 3 Theory of Plasticity and Creepage 4,5

Elective Courses Machines Components, part 2 2,5 Basics of Scientific Researches 3,5 Mechanics of Anisotropic Constructions* 3

Mechanics of Anisotropic Constructions* 3

Programming in Tasks of Mechanics* 3



___________________________________________________________________________ www.kpi.ua 65

Degree Structure for Specialist of Dynamics and Strength of Machines

Fifth Year





Intellectual Property 1 Labour Protection in the Branch 1 Theory of Plasticity and Creepage 1 Experimental Methods of Research 3

Theory of Vibrations and Persistence of Motion 4,5 Strength and Fracture of Structures 3 Experimental Methods of Research 3 New Materials 2 Strength and Fracture of Structures 3 Statistical Dynamics and Reliability 3,5 Durability at the Variable Loadings 3 Hydro-Aeromechanics 3 New Materials 2,5 Mechatronics 2,5 Statistical Dynamics and Reliability 4,5 Hydro-Aeromechanics 3

Elective Courses Theory of Damages 4 Modern Systems of Projecting 3

Total 26,5 Total 26

Sixth Year




Total 33 Total


___________________________________________________________________________ 66 GENERAL CATALOG 2009-2010

Degree Structure for Master of Dynamics and Strength of Machines

Fifth Year



Foreign Language 1 Foreign Language 1 Basics of Scientific Researches 2 Pedagogics of Higher School 1,5

Intellectual Property 1 Mathematical Methods of Optimization 3

Theory of Plasticity and Creepage 1,5 Labour Protection in the Branch 1

Theory of Vibrations and Persistence of Motion 6 Experimental Methods of Research 3 Experimental Methods of Research 3 Strength and Fracture of Structures 3 Strength and Fracture of Structures 3 New Materials 2 Durability at the Variable Loadings 3 Statistical Dynamics and Reliability 4 New Materials 2,5 Hydro-Aeromechanics 4 Statistical Dynamics and Reliability 5 Mechatronics 4,5 Hydro-Aeromechanics 3,5

Elective Courses Theory of Damages 3,5 Modern Systems of Projecting 3,5

Total 31,5 Total 34

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Attestation Project 25,5 Science of Patent and Copyright 2

Mathematical Modelling of Processes and Systems 3


Scientific Search on Subject of Attestation Project 7,5

Total 16 Total 25,5


___________________________________________________________________________ www.kpi.ua 67

Speciality: Production Engineering

Degree Structure for Bachelor of Mechanical Engineering

First Year



Foreign Language -1 2 Foreign Language-1 2

Philosophy (Ethics, Aesthetics, Science of Religion) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Mathematics 6,5 Mathematics 7 Chemistry 5 Physics 6

Descriptive Geometry, Engineering and Computer Graphics 5

Descriptive Geometry, Engineering and Computer Graphics 2

Computer Science 5 Computer Science 1,5 General Metalworking Processes 4 Engineering Mechanics 5 Material Science 4 Basics of Computer-Aided Drafting 2

Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Mathematics 6,5 Engineering Mechanics 3 Physics 6 Strength of Materials 5 Engineering and Computer Graphics. Computer-Aided Drafting 1


Engineering Mechanics 5 Theory of Cutting 5 Strength of Materials 4 Theoretical Basics of Heat Engineering 3

Elective Courses Basics of Computer-Aided Drafting 4 Hydraulics 2,5 Hydraulic and Pneumatic Engines 2,5

Total 30 Total 31


___________________________________________________________________________ 68 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Foreign Language of the Professional Direction 2

Foreign Language of the Professional Direction 2 Sociology 1,5 Electrical Engineering and Electronics 3

Electrical Engineering and Electronics 3

Theory of Mechanisms and Machines 1 Machines Components 1,5 Systems Engineering, Standardization and Measurements 4,5 Machines Components 2 2,5 Machines Components 3,5 Technological Practical Training 4,5

Life Safety and Labour Protection 3,5 Machine Tools and Transportation of Machining Process Workshops 5

Theory of Cutting 1 Designing and Product of Stocks 5 Machine Tools and Transportation of Machining Process Workshops 4 Production Engineering 5

Production Engineering 4,5 Theory of Automatic Control of Technical Systems 5

Total 29 Total 35

Fourth Year


Science of Law 2 Economics and Organization of Production 1,94



Microprocessors 2,5 Technological Rigging 3,5

Labour Protection 1,5 Basics of Automatic Production Systems 3

Foreign Language of the Professional Direction 2 CNC Machine-Tool Processing 3

Cutting Tools 3 Theory of Automatic Control of Technical Systems 3

Production Engineering 5 Preparation of Diploma Project 1,5 Elective Courses

Electrophysical and Electrochemical Methods of Materials Machining 3 Basics of Scientific Researches 1,5

Robotic Processing* 3 Product of Industrial Adjusting Equipment 1,5

Abrasive Processing* 4,5 Processes of Assembly in Mechanical Engineering* 3,5



___________________________________________________________________________ www.kpi.ua 69

Degree Structure for Specialist of Production Engineering

Fifth Year



Intellectual Property 1

Mathematical Simulation and Optimization of Production Systems 4

CAD of Cutting Tools 3 Designing of Technological Rigging 3

Designing of Equipment of Metal-working workshop 4 Designing of Production Processes 1 CAD of Production Processes 4 Planning of Automated Productions 3

Designing of Production Processes 3 Size Design and Analysis of Production Processes 3

Technology Systems of the Flexible Production 3 CAM Systems 3 Control of Cutting Processes 3 Designing of Assembly Plants 2,5

Elective Courses

Marketing 1,5 Technology of Processing of Special Details* 2,5

Algorithms of CAM* 3 Mathematical Simulation in CAM for CNC Machine-tools* 2

Total 27,5 Total 25

Specialization: Processes and Methods of Processing of the Special Materials 3

Special Methods of Assembly of Aerospace Apparatus 2,5

Technology of Machining of Complex Surfaces 3

Total 6 Total 2,5

Specialization: Systems Analysis 3 Designing of software of CIM 2,5 Object-oriented Programming 3

Total 6 Total 2,5

Sixth Year



Total 33 Total


___________________________________________________________________________ 70 GENERAL CATALOG 2009-2010

Degree Structure for Master of Production Engineering

Fifth Year


Foreign Language 2 Pedagogics of Higher School 1,5

Basics of Scientific Researches 2 Mathematical Methods of Optimization 3

Intellectual Property 1 Labour Protection in the Branch 1

CAD of Cutting Tools 3

Mathematical Simulation and Optimization of Production Systems 4

Designing of Equipment of Metal-working Workshop 4

Designing of Technological Rigging 3

CAD of Production Processes 4 Designing of Production Processes 1 Designing of Production Processes 3 Planning of Automated Productions 3

Control of Cutting Processes 3 Size Design and Analysis of Production Processes 3

CAM Systems 3 Elective Courses

Marketing 1,5 Technology of Processing of Special Details* 2,5

Algorithms of CAM* 3 Mathematical Simulation in CAM for CNC Machine-tools* 2

Total 26,5 Total 27

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5

Researches and Preparation of Pregraduation Thesis 25,5

Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Experimental Methods of Research of Technological Processes 4 Software for Technological Processes Research 4 Information Technologies in Mechanical Engineering 4 Scientific Research on Pregraduation Thesis Subject 7,5

Total 28 Total 25,5


___________________________________________________________________________ www.kpi.ua 71

Speciality: Machine Tools and Machinery Systems



Course Title Credit Course Title Credit Foreign Language-1 2 Foreign Language-1 2 Philosophy-2 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1

Mathematics-1. Analytical Geometry. Differential Equations 6,5

Mathematics-2. Integral Calculus. Differential Equations. Multiple and Curvilinear Integrals 7

Chemistry 5 Physics-1. Mechanics, Molecular Physics and Electrostatics 6

Engineering and Computer Graphics-1. Descriptive Geometry 5

Engineering and Computer Graphics-2. Projection Drawing 2

Computer Science 5 Computer Science. Term Project. 1,5

General Metalworking Processes 4 Engineering Mechanics-1. Static. Kinematics 5

Material Science 4 Elective Courses

Basics of Computer-Aided Drafting 2 Total 30 Total 31,5

Second Year


Foreign Language-1 2 Foreign Language-1 2 Philosophy (Ethics, Aesthetics) 2,5 Ecology 2

Mathematics-3. Function of Complex Variable. Elements of Theory of Probabilities 6,5 Engineering Mechanics 3 Physics-2 6 Strength of Materials 5 Engineering and Computer Graphics-3. Projection Drawing 1


Engineering Mechanics-2 5 Hydraulics 3 Strength of Materials 4 Theory of Cutting 3,5 Basics of Heat Engineering 3

Elective Courses Bases of Technical Creation 3,5 Basics of Scientific Researches 3,5

Total 30 Total 31,5


___________________________________________________________________________ 72 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Basics of Electrical and Electronics Engineering 3

Electrical and Electronics Engineering 3

Systems Engineering, Standardization and Measurements 4,5 Machines Components 2 4 Theory of Mechanisms and Machines 1,5 Technological Practical Training 4,5 Machines Components 4 Microprocessor Technology 3 Life Safety and Labour Protection 3,5 Metal-cutting Machine-tools 4,5 Cutting-Tool of Automated Productions 3 Production Engineering 5 Hydraulic and Pneumatic Engines 3,5 Theory of Automatic Control 3,5 Metal-cutting Machine-tools 4

Elective Courses Basics of Computer-Aided Drafting 3,5

Total 31 Total 34,5

Fourth Year


Science of Law 2 Economics and Organization of Production 1,94



Microprocessor Technology 2 Metal-working Equipment 2,28

Labour Protection 1,5 Automatic Machine Tools and Transfer Lines 3

Foreign Language of the Professional Direction 2 Industrial Robots 3 Metal-working Equipment 4,22 CNC Machine Tools 2,5 Production Engineering 4 Preparation of Diploma Project 1,5 Theory of Automatic Control 3

Elective Courses

Computer Office Work* 3 Electrical Equipment of Machine Tools 2,5

CAD of Technical Systems* 2,11 Maintenance and Repair of Machine Tools 1,5

CAD of Technical Systems* 1,89 Woodworking Machine-tools 2



___________________________________________________________________________ www.kpi.ua 73

Degree Structure for Specialist of Machine Tools and Machinery Systems

Fifth Year





Designing of Machine Tools and Machine 3,33


Test and Research of Machine-tools 2,5

Processes of Machine Tool Construction 4,5 Machine Tools CAD Systems 3

Designing of Cutting Tools 3 Mathematical Simulation of Machine Tools 3,5

Designing of Machine Tools Devices 3 Control Systems of Machine Tools 3,5 Hydraulic and Pneumatic Automatics 3 Dynamics of Machine Tools 3

Elective Courses Marketing 1,5 Information Protection* 2

Technological Equipment with Parallel Kinematics 3

Automatic Design of Machine Tools* 1,97

Automatic Design of Machine Tools* 2,03 Design and Technical Aesthetics* 2,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 74 GENERAL CATALOG 2009-2010

Degree Structure for Master of Machine Tools and Machinery Systems

Fifth Year






Designing of Machine Tools and Machine 3


Processes of Machine Tool Construction 4,5

Test and Research of Machine-tools 2,5

Designing of Cutting Tools 3 Machine Tools CAD Systems 3,5

Designing of Machine Tools Devices 3

Mathematical Simulation of Machine Tools 3,5

Hydraulic and Pneumatic Automatics 3 Control Systems of Machine Tools 4

Dynamics of Machine Tools 3 Scientific Research on Subject of Attestation Work 11

Elective Courses Marketing 1,5 Information Protection* 2

Technological Equipment with Parallel Kinematics* 3 Design and Technical Aesthetics* 2,5

Total 29 Total 38

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Science of Patent and Copyright 2


Basics of Society's Sustainable Development 2 Computer Office Work 2 Automatic Design of Cutting Tools 4

Scientific Research and Preparation of Attestation Work 25,5

Total 40 Total


___________________________________________________________________________ www.kpi.ua 75

Speciality: Intellectual Property

Degree Structure for Specialist of Intellectual Property

Fifth Year



Foreign Language of the Professional Direction 2 Labour Protection in the Branch 1

Intellectual Property 3 Patent Researches and Examination of Industrial Property Objects 3

Theory and Practice of Technical Creation 4

Searching Planning and Design of Industrial Property Objects 1,56

Systems Analysis and Methods of Decision Making 3,5

Confirmation of Accordance of Industrial Property Objects 2,5

Acquisition and Protection of Rights for Objects of Industrial Property 2,5

Estimation of Rights for Industrial Property Objects 2,5

Information Technologies and Computer Office Work 3

Information Safety in Field of Intellectual Property 2

Searching Planning and Design of Industrial Property Objects 3,44 Strategic Management 2 Economics of Intellectual Property 2,5

Elective Courses

Marketing 1,5 Realization of Industrial Property Objects 2

Computer Graphics* 2,06 Design and Technical Aesthetics 2,5 CAD of Technical Systems* 2,06 Computer Graphics* 1,94 CAD of Technical Systems* 1,94


Sixth Year




Total 33 Total


___________________________________________________________________________ 76 GENERAL CATALOG 2009-2010

Speciality: Production of Cutting Tools


First Year



Foreign Language-1 2 Foreign Language-1 2

Philosophy (Ethics, Aesthetics, Science of Religion) 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Mathematics 7 Mathematics 7 Chemistry 5 Physics 6

Engineering and Computer Graphics. Descriptive Geometry 4,5

Engineering and Computer Graphics. Descriptive Geometry 2,5

Computer Science 5 Computer Science 3 General Metalworking Processes 4 Material Science 4 Engineering Mechanics 5

Total 30 Total 31,5

Second Year



Philosophy 2,5 Foreign Language 2 Foreign Language 2 Ecology 2 Mathematics 6 Strength of Materials 5 Physics 6 Engineering Mechanics 4

Engineering and Computer Graphics. Descriptive Geometry 1


Strength of Materials 4 Computer Graphics 3,5 Engineering Mechanics 4 Hydraulics 3 Basics of Heat Engineering 3 Hydraulic and Pneumatic Engines 4 Computer Graphics 1,5 Thermalphysic Processes 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 77

Third Year


Foreign Language of the Professional Direction 2 Sociology 1,5

Economic Theory 2 Foreign Language of the Professional Direction 2



Life Safety and Labour Protection 3,5 Machines Components 1,5 Systems Engineering, Standardization and Measurements 4,5 Machines Components-2 2,5 Machines Components 3,5 Practical Training 4,5 Theory of Mechanisms and Machines 1,5

Cutting Theory and Special Processes of Forming 3,5

Basics of Forming of Surfaces 3 Cutting-Tool of Automated Productions 5

Cutting Theory and Special Processes of Forming 3

Metal-cutting Machine-tools and Equipments of Automated Production 4

Production Engineering 3,5 Elective Courses

Computer Aided Design 3 Automatic Design of Cutting Tools 4 Total 29 Total 35


___________________________________________________________________________ 78 GENERAL CATALOG 2009-2010

Fourth Year





Microprocessors 1,5 Cutting-Tool of Automated Productions 1,5

Labour Protection 1,5 Forming of Special Surfaces 3,5 Foreign Language of the Professional Direction 2 Theory of Automatic Control 2

Basics of Mechanics of Destruction 3,5 Processes of Machine Tool Construction 4,5

Cutting-Tool of Automated Productions 4 Preparation of Bachelor's Project 1,5 Metal-cutting Machine-tools and Equipments of Automated Production 3 Production Engineering 4

Elective Courses

Cutting Tools CAD Systems 2

Electrophysical and Electrochemical Methods of Materials Processing 3

Designing of Machine Tools Devices* 2,5 Cutting Tools CAD Systems 3

Machining of Composition Materials 3,5

Total 30 Total 28


___________________________________________________________________________ www.kpi.ua 79

Degree Structure for Specialist of Production of Cutting Tools

Fifth Year




Intellectual Property 1 Information and Software of CNC Machine-tools 4

Prediction of Efficiency of the Cutting Tools 4,5 Automatic Design of Cutting Tools 3 Superhard Materials of Cutting Tools 3

Theory and Design of Cutting Tools 3

Theory of Tool Designing 3 Mathematical Simulation of Cutting Processes of Cutting Tools 1

Mathematical Simulation of Cutting Processes of Cutting Tools 3

Methods and Equipment for a Heightening of Productivity of the Cutting Tools 4

Special Technology of Cutting-tool Productions 3

Designing of Press Forming and Drop Forging Equipment 2,5

Designing of Press Forming and Drop Forging Equipment 3 Dynamics of Tooling Systems 3

Elective Courses Marketing 1,5 Special Tool 3

Theoretical Fundamentals of Design and Exploitations of Machine-tool-instrumental Systems 4

Total 28 Total 24,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 80 GENERAL CATALOG 2009-2010

Degree Structure for Master of Production of Cutting Tools

Fifth Year






Superhard Materials of Cutting Tools 5,5

Information and Software of CNC Machine-tools 5

Designing of Press Forming and Drop Forging Equipment 3

Designing of Press Forming and Drop Forging Equipment 2,5


Automatic Design of Machine Tools 4,5

Mathematical Simulation of Cutting Processes 6


Prediction of Efficiency of the Cutting Tools 6,5 Dynamics of Tooling Systems 4,5

Mathematical Simulation of Cutting Processes 1

Elective Courses Marketing 1,5 Special Cutting-Tool 3

Theoretical Fundamentals of Design and Exploitations of Machine-tool-instrumental systems 4

Total 35,5 Total 30

Sixth Year




Scientific Research and Preparation of Master's Thesis 25,5

Science of Patent and Copyright 2



Scientific Research on Master's Thesis Subject 7,5

Total 16 Total 25,5


___________________________________________________________________________ www.kpi.ua 81

Speciality: Equipment for Materials Processing with Pressure


First Year







Computer Science 5 Computer Science 1,5 Technology of Engineering Materials 4 Engineering Mechanics 5 Material Science 4

Elective Courses Basics of Professional Activity 2

Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Mathematics 6,5 Engineering Mechanics 3 Physics 6 Strength of Materials 5

Engineering and Computer Graphics. Projection Drawing 1

Theory of Mechanisms and Machines 5,5

Engineering Mechanics 5 Hydraulics 2,5 Strength of Materials 4 Hydraulic and Pneumatic Engines 2,5 Basics of Heat Engineering 3 Theory of Plastic Deformation 6

Elective Courses Object-oriented programming 3

Total 30 Total 31,5


___________________________________________________________________________ 82 GENERAL CATALOG 2009-2010

Third Year




Economic Theory 2 Sociology 1,5 Electrical Engineering and Electronics 3


Theory of Mechanism and Machines 1 Machines Components 1

System Engineering, Standardization and Measurements 4,5

Machines Components-3. Hydromechanical Load-lifting Mechanisms 2,5

Machines Components 4 Technological Practical Training 4,5

Life Safety and Labour Protection 3,5 Press and Drop Forging Technology in the Cold State 7

Press and Drop Forging Technology in the Hot State 6,5

Press Forming and Drop Forging Equipment I Crank-type Machinery 6,5

Heating and Heating Equipment 4,5 CAD of Production Processes 3,5 Elective Courses

Methods of Measuring and Registration of Processing of Metals by Pressure 3

Total 31 Total 34,5

Fourth Year




Foreign Language of the Professional Direction 1,5

Microprocessors 1,5 Press and Drop Forging Technology in the Hot State 1

Labour Protection 1,5 Press Forming and Drop Forging Equipment 5


Automatization and Robotization of Blacksmith-Stamping Production 3

Press and Drop Forging Technology in the Hot State 1

Basics of Technology of Punching Engineering 3

Press Forming and Drop Forging Equipment 5 Preparation of Diploma Project 1,5

Elective Courses Numeral Methods of Analysis of Processing of Metals by Pressure 4

Special Machines and Methods of Processing of Metals by Pressure 3

Microsystems of Control an Equipment of Processing of Metals by Pressure* 4

Methods of Measuring and Registration of Processing of Metals by Pressure 2,5

Technology of Hot Punching 2 1 Object-Oriented Programming 3,5 Total 26 Total 27,5


___________________________________________________________________________ www.kpi.ua 83

Degree Structure for Specialist of Equipment for Materials Processing with

Pressure

Fifth Year



Foreign Language 2 Labour Protection 1

Intellectual Property 1 Special Parts of Blacksmith-Punching Equipment 2

Press Forming and Drop Forging Equipment 1,5 Technology of Cold Punching 3,5

Theoretical Analysis of Processing Metals by Pressure 3,5

Technology of Production Blacksmith-Punching Equipment 3,5

Special Parts of Blacksmith-Punching Equipment 2 Designing of Workshops 3

CAD Systems of Press Forming and Drop Forging Production 3

High-speed Methods of Pressure Processes 3

Theory of Automatic Control and FMS of Blacksmith-Punching Production 4

Control System of Industrial Equipment 3

Intensification of Sheet Punching 2,5 Bases of Friction, Wear and Greasing 2,5

Electric Equipment of Blacksmith-stamping Production 2,5

Elective Courses

Marketing 1,5 Technology of Processing of Plastic Details 3,5

Technology of Deformed Composition Materials* 4

Total 30 Total 22,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 84 GENERAL CATALOG 2009-2010

Degree Structure for Master of Equipment for Materials Processing with

Pressure

Fifth Year





Intellectual Property 1 Labour Protection 1 Press Forming and Drop Forging Equipment 1,5 Technology of Cold Punching 6 Theoretical Analysis of Processing Metals by Pressure 6

Technology of Production Blacksmith-Punching Equipment 5,5

Theory of Automatic Control and FMS of Blacksmith-Punching Production 6

High-speed Methods of Pressure Processes 3,5

CAD Systems of Press Forming and Drop Forging Production 4,5

Control System of Industrial Equipment 3,5

Intensification of Sheet Punching 4,5 Bases of Friction, Wear and Greasing 3,5

Elective Courses

Marketing 1,5 Technology of Processing of Plastic Details 3,5

Technology of Deformed Composition Materials* 3,5

Total 36 Total 27,5

Sixth Year


Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Scientific Research on Chosen Subject 7,5

Elective Courses Basics of Society's Sustainable Development 2

Total 16 Total 25,5


___________________________________________________________________________ www.kpi.ua 85

Speciality: Materials Processing with Special Technologies


First Year


Course Title Credit Course Title Credit Philosophy (Ethics, Aesthetics, Science of Religion) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Foreign Language-1 2 Foreign Language-1 2 Mathematics 6,5 Mathematics 7

Chemistry 5 Engineering and Computer Graphics. Projection Drawing 2

Descriptive Geometry and Computer Graphics 5 Computer Science 1,5 Computer Science 5 Physics 6 General Metalworking Processes 4 Material Science 4 Engineering Mechanics 5

Elective Courses Basics of Professional Activity 2

Total 30 Total 31,5

Second Year


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Mathematics 6,5 Engineering Mechanics 3 Engineering and Computer Graphics. Computer Graphics 1 Strength of Materials 5

Physics 6 Theory of Mechanisms and Machines 5

Basics of Heat Engineering 3 Hydraulics 2,5 Engineering Mechanics 5 Strength of Materials 4

Elective Courses

Physics of Lasers (Calculations and Construction) 5

Physics of Energy Concentrated Streams Interaction with Matter 7

Total 30 Total 31,5


___________________________________________________________________________ 86 GENERAL CATALOG 2009-2010

Third Year



Economic Theory 2 Sociology 1,5 Foreign Language of the Professional Direction-1 2

Foreign Language of the Professional Direction-1 2


Basics of Electrical and Electronics Engineering 3

Systems Engineering, Standardization and Measurements 4,5 Machines Components-2 4 Basics of Electrical and Electronics Engineering 3 Production Engineering-2 5,5

Machines Components-1 3,5

Electrophysical and Electrochemical Methods of Materials Processing 4

Hydraulic and Pneumatic Automatics 2,5 Radial Facilities of Welding 6,5 Life Safety and Labour Protection 3,5 Technological Practical Training 4,5 Physics of Lasers (Calculations and Construction) 3,5 Basics of Scientific Researches 3,5 Production Engineering 4,5


Fourth Year




Economics and Organization of Production 2,5 Management 1,5

Political Science 1,5 Foreign Language of the Professional Direction 2

Microprocessor Technology 1,5 Laser Technologies 7 Labour Protection 1,5 Laser Technological Equipment 3,5 Foreign Language of the Professional Direction 2 Radial Facilities of Welding 2,5 Radial Facilities of Welding 2 Production Engineering-2 1,5 Physics of Energy Concentrated Streams Interaction with Matter 2,5


Production Engineering-2 3 Basics of Scientific Researches 2,5 Mathematical Simulation of System and Processes 4

Methods of Organic Materials Connection 5

Basics of Design of Optical Details and Knots of Laser Technological Equipment 5,5

Total 28 Total 29


___________________________________________________________________________ www.kpi.ua 87

Degree Structure for Specialist of Materials Processing with Special

Technologies

Fifth Year



Intellectual Property 1 Foreign Language 1 Foreign Language 1 Labour Protection in the Branch 1

Automatization of Production Processes 4 Laser Technological Equipment 4 Laser Technologies 4 Basics of CAPP 3,5

Laser Technology-2 4 New Applications of Lasers in Technology 2

Laser Technological Equipment 4 Basics of Scientific Researches 2

Optical Systems of Laser Technological Equipment 4

Special Elements and Riggings of Laser Technological Complex 4,5

Physical Methods of Researches 3,5 Elective Courses

Marketing 1,5 Design of Laser Equipment Optical Parts** 3,5

Design of Laser Equipment Optical Parts** 4

Total 27,5 Total 25

Sixth Year



Pregraduation Practical Training 12 Preparation of Pregraduation Thesis 21

Total 33 Total


___________________________________________________________________________ 88 GENERAL CATALOG 2009-2010

Degree Structure for Master of Materials Processing with Special Technologies

Fifth Year


Intellectual Property 1 Pedagogics of Higher School 1,5 Foreign Language 1 Foreign Language 1


Automatization of Production Processes 4 Labour Protection in the Branch 1 Laser Technologies 4 Laser Technological Equipment 4 Laser Technology-2 4 Basics of CAPP 3,5 Laser Technological Equipment 3,5 Physical Methods of Researches 3,5 Optical Systems of Laser Technological Equipment 3,5

Special Elements and Riggings of Laser Technological Complex 4

New Applications of Lasers in Technology 1,5

Elective Courses

Marketing 1,5 Design of Laser Equipment Optical Parts** 3,5

Design of Laser Equipment Optical Parts** 4


Sixth Year


Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5

Scientific Researches and Preparation of Pregraduation Thesis 25,5

Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Special Sections of Technology of High-efficiency Processing Methods 3,5 Matrix Laser Optics 1,5 Basics of Society's Sustainable Development 2 Development Perspectives of Laser Technology 1,5 Scientific Research on a Subject of Pregraduation Thesis (11 11

Total 26 Total 25,5


___________________________________________________________________________ www.kpi.ua 89

Speciality: Hydraulic and Pneumatic Machines


First Year







Computer Science 5 Computer Science 2 General Metalworking Processes 4 Engineering Mechanics 5 Material Science 4

Elective Courses Introduction to Speciality 1,5

Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Mathematics 6,5 Engineering Mechanics 3 Physics 6 Strength of Materials 5



Engineering Mechanics 5 Applied Hydromechanics 6,5 Strength of Materials 4 Hydraulic and Pneumatic Systems 4 Basics of Heat Engineering 3

Elective Courses Computer Aided Design 3,5

Total 30 Total 31,5


___________________________________________________________________________ 90 GENERAL CATALOG 2009-2010

Third Year




Economic Theory 2 Sociology 1,5 Basics of Electrical and Electronics Engineering 3

Basics of Electrical and Electronics Engineering 3

Theory of Mechanisms and Machines 1,5 Machines Components 1,5 Systems Engineering, Standardization and Measurements 4,5

Hydromechanical Load-lifting Mechanisms 2,5

Machines Components 4 Technological Practical Training 4,5

Life Safety and Labour Protection 3,5 Theory of Automatic Control and Dynamics of FMS 4

Mechanics of Liquid and Gas 4,5 Hydraulic Machines and Transmissions 4

Theory of Automatic Control and Dynamics of FMS 2,5

Hydrodynamic Machines and Transmissions 2,5

Hydraulic Machines-1 5 Elective Courses

Hydrodynamic Theory of Grate 2,5 Basics of Computer-Aided Design 3 Total 30 Total 33,5

Fourth Year




Basics of Hydraulic Automatics Theory 3,5

Microprocessor Technology 1,5 Foreign Language of the Professional Direction 1,5

Labour Protection 1,5 Basics of Hydraulic Engines Theory 3,5


Basics of Pneumatic and Electric Automatics Theory 3,5

Hydraulic Machines and Transmissions 3,5 Production Engineering 4 Basics of Hydraulic Engines Theory 3,5 Preparation of Diploma Project 1,5 Hydrodynamic Machines and Transmissions 3 Discrete Systems of Automatic Control 3

Elective Courses Reology of Work Liquids 1 Ecological Systems and Devices 1 Discrete Systems of Automatic Control 2 5 Basics of Mechatronics 5

Total 30 Total 27


___________________________________________________________________________ www.kpi.ua 91

Degree Structure for Specialist of Hydraulic and Pneumatic Machines

Fifth Year




Intellectual Property 1 Hydraulic Automatics and Automatic Control Systems 2,5

Computer Programming in FMS 3,5 Technology of Hydraulic Engines Making 2

Pneumatic Automatics 4 Compressor Machines 1,5

Designing of Hydraulic Engines 4,5 Exploitation and Diagnostics of Hydropneumosystems 2

Hydraulic Automatics and Automatic Control Systems 3,5 Designing of Hydraulic Engines 4,5

Technology of Hydraulic Engines Making 2,5

Controllers in Hydraulic Automation Control System 2,5

Compressor Machines 3,5 Test and Research of Hydraulic and Pneumatic Systems 3

Elective Courses

Marketing 1,5 Controllers in Hydraulic Automation Control System 4

Hydraulic Automatics and Automatic Control Systems 2 3,5

Total 29,5 Total 23

Sixth Year




Total 33 Total


___________________________________________________________________________ 92 GENERAL CATALOG 2009-2010

Degree Structure for Master of Hydraulic and Pneumatic Machines

Fifth Year


Course Title Credit Course Title Credit Foreign Language of the Professional Direction 2 Pedagogics of Higher School 1,5



Pneumatic Automatics 4 Hydraulic Automatics and Automatic Control Systems 2,5

Designing of Hydraulic Engines 4,5 Technology of Hydraulic Engines Making 1

Hydraulic Automatics and Automatic Control Systems 4 Compressor Machines 2 Technology of Hydraulic Engines Making 3,5

Exploitation and Diagnostics of Hydropneumosystems 3,5

Compressor Machines 3,5 Designing of Pneumatic Engines 6

Controllers in Hydraulic Automation Control System 4,5

Test and Research of Hydraulic and Pneumatic Systems 4,5

Elective Courses

Marketing 1,5 Controllers in Hydraulic Automation Control System 4

Hydraulic Automatics and Automatic Control Systems 2 3,5


Sixth Year



Preparation of Attestation Work (12th term)* 25,5

Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Basics of Greasing Theory 2,5 Scientific Research on a Subject of Attestation Work 7,5


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INSTITUTE OF PHYSICS AND TECHNOLOGY

___________________________________________________________________________ www.kpi.ua 93

Institute of Physics and Technology

Institute of Physics and Technology was founded in February 1995 according to the resolution of Ministry of Education and Sciences and National Academy of Sciences of Ukraine.

It is one of the new scientific and educational departments of NTUU “KPI”. The institute trains specialists in up-to-date branches of applied mathematics and physics, informatics and information security of Ukraine.

During their study the students of the institute get the education at the level of the best universities of the world that is testified by repeated convincing winning of numerous international students’ competitions in London, Budapest, Bucharest, Munich, etc.

The educational system of PTI is based on principles of higher physics and technology school that were founded in the 19th century in Ecole Polytechnique in Paris and later were introduced and enriched in Californian Institute of Technology, Massachusetts Institute of Technology, Moscow Institute of Physics and Technology.

The training system is based on the following principles: - thorough training in exact sciences – Physics and

Mathematics and in Computer science; - combination of high level of the general scientific education

preserving best traditions of universities and the profound professional training, practical skills improvement in the main institutes and major departments;

- involvement of leading scientists, designers and developers of information systems in teaching of corresponding branches;

- involvement of students in scientific research and development of commercial projects.


___________________________________________________________________________ 94 GENERAL CATALOG 2009-2010

The training of students is provided according to the curriculum in following fields:

• Applied Physics (Applied Physics), • Applied Mathematics (Informatics), • Security of Information and Communication Systems

(Information Security in Computer Systems and Networks)

• Systems of Technical Information Protection (Information Protection with Restricted Access and its Automated Processing).

http://pti.kpi.ua


___________________________________________________________________________ www.kpi.ua 95

Speciality: Applied Physics

Degree Structure for Bachelor of Applied Physics

First Year


Physical Training 1 Physical Training 1 Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1 Philosophy (Ethics, Aesthetics, Science of Religion, Logic) 1

Foreign Language 2 Foreign Language 2 Algebra and Geometry 1. Linear Algebra and Analytic Geometry 3

Algebra and Geometry 2. Introduction to Abstract Algebra 1,5

Algebra and Geometry 1. Linear Algebra and Analytic Geometry 3

Algebra and Geometry 2. Introduction to Abstract Algebra 1

Mathematical Analysis 1. Limits, Derivatives, Research of Functions 5

Mathematical Analysis 2. Integrals, Rows, Uniform Convergences 5

General Physics 1. Mechanics 9 General Physics 2. Molecular Physics and Thermodynamics 9

Software Supply for PC 3 Chemistry 3 Programming 1. C++. Structural Approach 3

Programming 2. Object-Oriented Programming 4

Computer Graphics 2,5 Introduction to Speciality 1

Total 31 Total 32,5

Second Year First Semester Second Semester

Course Title Credit Course Title Credit Physical Training 1 Physical Training 1 Foreign Language 2 Philosophy 1 2,5 Ecology 2 Foreign Language 2 Mathematical Analysis 3. Differential and Integral Calculations for Function with Several Variables 5 General Physics 4. Optics 9 General Physics 3. Electricity and Magnetics 9 Life Safety and Labour Protection 3,5 Theoretical Physics 1. Classical Mechanics 4

Theoretical Physics 2. Classical Mechanics 4

Programming 3. Basics of Web-Appendings Making 4

Differential Equations 2. Differential Equations of Higher Orders and Differential Equation Systems 3

Differential Equations 1. Differential First-Order Equations 4

Theory of Function with Complex Variables 3

Tensor Analysis 2

Mathematical Modelling of Physical Processes and Applied Programs 3

Total 31 Total 33


___________________________________________________________________________ 96 GENERAL CATALOG 2009-2010

Third Year


Psychology 1,5 Economic Theory 2

Sociology 1,5 Foreign Language of the Professional Direction 2

Foreign Language of the Professional Direction 2 Physical Training 1 Physical Training 1 Equations of Mathematical Physics 3,5 Theory of Probabilities and Mathematical Statistics 4 Numerical Methods 4,5 Equations of Mathematical Physics 3,5 General Physics 6. Nuclear Physics 4,5

General Physics 5. Atomic Physics 9 Theoretical Physics. Quantum Mechanics 5

Theoretical Physics. Field Theory 3 Statistical Radiophysics and Optics 3,5 Oscillations and Waves 4 Basics of Radioelectronics 3 Basics of Metrology in Applied Physics 2

Studying and Scientific Practical Training 4,5

Elective Courses

Basics of General Biology and Biochemistry 3


Elective Courses:

X-Ray Research Methods 3 Total Total 3


___________________________________________________________________________ www.kpi.ua 97

Fourth Year



Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5

Random Processes 3 Theoretical Physics. Electrodynamics of Continuums 3,5

Theoretical Physics. Statistical Physics 4 Labour Protection 1,5 Microelectronics 3 Solid State Physics 2,67 Solid State Physics 2,83 Basics of Scientific Researches 2

Laboratory Practical Training on Speciality 1

Laboratory Practical Training on Speciality 1



Analysis and Experiments Processing Methods 2,5

Theoretical Physics. Physics of Continuums 2,5

Physical and Chemical Information with Crystals Properties Controlling 1

Preparation of Attestation Project 0,5 Specialization

Organic Chemistry 3,5 Biophysics of Complex Systems 1,44 Basics of Biophysics 2,5 Biophysics of Complex Systems 1,56


Specialization:

Quantum Electronics 3 Symmetry in Physics 2,5 Optoelectronics 3,5

Total 6,5 Total 2,5


___________________________________________________________________________ 98 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Applied Physics

Fifth Year



Basics of Management 2 Foreign Language 2,22 Intellectual Property 1 Labour Protection in the Branch 1 Foreign Language 2,28 Physical Kinetics 4 Synergy 2,5 Nonlinear Optics 2,5


Technology and Application of Nanostructures 4

Plasma Physics 4 Quantum Chemistry 2 Local Research Methods 2 Scientific Research on Subject 1,75 Scientific Research on Subject 1,75 Infrared Electronics 2 Physics and Chemistry of Surface 2,5 Integrated and Fiber Optics 3 Physical Science of Materials 2 Physics of Indigested Systems 2,5

Elective Courses

Mathematical Models Building in Natural History 3


Specialization:

Human Anatomy and Physiology Basics 2 Biochemistry of Cell Processes 2

Research Methods of Stimulating Membranes 2

Biophysics of Synoptic Transmission 2

Biophysics of Membrane Structures 2 Molecular Physiology 2

Total 4 Total 8

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 99

Degree Structure for Master of Applied Physics


Course Title Credit Course Title Credit Basics of Management 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1,94 Foreign Language 4 Labour Protection in the Branch 1 Synergy 2,5 Physical Kinetics 4 Mathematical Methods of Optimization 4 Nonlinear Optics 2,5

Plasma Physics 4 Technology and Application of Nanostructures 4

Local Research Methods 2,5 Quantum Chemistry 2,5 Scientific Research on Subject 4,5 Scientific Research on Subject 4,5 Physics and Chemistry of Surface 2,5 Integrated and Fiber Optics 3 Infrared Electronics 2 Physical Science of Materials 2 Physics of Indigested Systems 2,5

Elective Courses Mathematical Models Building in Natural History 3

Total 30 Total 31,44

Specialization: Human Anatomy and Physiology Basics 2 Biochemistry of Cell Processes 2 Research Methods of Stimulating Membranes 2

Biophysics of Synoptic Transmission 2

Biophysics of Membrane Structures 2 Molecular Physiology 2

Total 4 Total 8


Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Preparation of Attestation Project 25,5 Science of Patent and Copyright 2 Foreign Language 2,06

Basics of Society's Sustainable Development 2 New Materials and Substances 3 Scientific Research on Subject 4,5

Elective Courses Physics of Information Processes and Systems 3



___________________________________________________________________________ 100 GENERAL CATALOG 2009-2010

Speciality: Informatics

Degree Structure for Bachelor of Applied Mathematics

First Year



Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy 2 1 Foreign Language 2 Foreign Language 2



Algebra and Geometry 1 2 Algebra and Geometry 2 1 Algebra and Geometry 1 3 Algebra and Geometry 2 1

Discrete Analysis 1. Sets and Relations 4

Discrete Analysis 2. Functional Dependences and Structures 3,5

General Physics 1. Mechanics 1,5 Theory of Algorithms and Mathematical Logic 1 2,5

General Physics 1. Mechanics 1,5 General Physics 2. Electromagnetism 4,5

General Physics 1. Mechanics 2 General Physics 2. Electromagnetism 1,5

Software Supply for PC 3 Programming 2. Object-Oriented Programming 4

Programming 1. Structural Approach 4

Applied Algebra 1. Introduction to Abstract Algebra 3

Total 30 Total 31,5

Elective Courses:

Physical Training 2 Physical Training 2

Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 101

Second Year



Foreign Language 2 Philosophy 1 2,5

Mathematical Analysis 3. Analysis of Functions with Several Variables 4 Foreign Language 2

Differential Equations 1. Differential First-Order Equations 3

Differential Equations 2. Differential First-Order Equations and Differential Equation Systems 3

Theory of Algorithms and Mathematical Logic 2. Theory of Algorithms 3 Computer Architecture 4

General Physics 3. Quantum Physics and Structure of Matter 3


General Physics 3. Quantum Physics and Structure of Matter 1,5 Operating Systems 3

General Physics 3. Quantum Physics 1,5

Basics of Data Security in Information and Communication Systems 3

Programming 3. Basics of Web-Appendings Making 6 Special Chapters of Programming 5

Applied Algebra 2. Theory of Finite Fields and Its Application 3

Elective Courses



Tensor Analysis 2

Total 30 Total 31,5

Elective Courses:

Combinatorial Analysis 1 3 Combinatorial Analysis 2 6

Total 3 Total 6

Elective Courses:


Total 2 Total 2


___________________________________________________________________________ 102 GENERAL CATALOG 2009-2010

Third Year




Foreign Language 2

Theory of Probabilities and Mathematical Statistics 2. Mathematical Statistics 4

Ecology 2 Life Safety and Labour Protection 3,5

Theory of Probabilities and Mathematical Statistics1. Theory of Probabilities 3 Numerical Methods 4 Functional Analysis 4 Computer Networks 3

Mathematical Modelling and Systems Analysis 4

Models and Methods of Decision-Making 4

Quality Maintenance Technology for Information Security Software Tools 5 Industrial Practical Training 4,5 Theory of Information and Coding 5

Elective Courses

Theoretical Physics 3. Field Theory 4

Equations of Mathematical Physics 2. Theory of Operators and Evolutional Equations 4,5

Equations of Mathematical Physics 1. General Functions and Classical Equations of Mathematical Physics 3

Total 30 Total 36,5

Elective Courses:

Special Chapters of Calculus Mathematics 4 Symmetrical Cryptography 4,5

Basics of Complex Systems Security Mathematical Modelling 3

Total 7 Total 4,5

Elective Courses:

Physical Training 2

Total 2 Total


___________________________________________________________________________ www.kpi.ua 103

Fourth Year



Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Random Processes 3 Labour Protection 1,5 System Programming 3 Computer Networks 3

Mathematical Modelling and Systems Analysis 3 Control Theory 2,5

Intellectual Systems 3 Models and Methods of Decision-Making 2,5



Preparation of Thesis 2 Methods of Optimization 3,5 Preparation of Thesis 2

Elective Courses

Quantum Optics and Quantum Theory of Information 3 Quality Maintenance Technology for Information Security Software Tools 5



___________________________________________________________________________ 104 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Informatics

Fifth Year



Intellectual Property 1 Labour Protection in the Branch 1 Foreign Language 2 General Theory of Games 2 Methods of Reliability and Risk Theory 2 Expert Systems 2

Enterprise Networks 2 Mathematical Basics of Structurally Complex Systems Security 1,97

Structural Methods of Pattern Recognition 4 Introduction to Cryptoanalysis 2

System Analysis 2 Information Bank Technologies and Bank Information Security 2,69

Theory of Information Security 4 Data Security in Computer Systems** 2,44

Cryptographic Systems on Elliptic Curves 3

Methods of Cryptographic Mechanisms Realization** 3

Mathematical Basics of Structurally Complex Systems Security 2,03

Standardization in Field of Information Security ** 2

Information Bank Technologies and Bank Information Security 2,31 Design of Programme Complexes 2 Data Security in Computer Systems** 3,56

Elective Courses

Data Security in Specialized Information and Telecommunication Systems* 3,5


Specialization:

Scientific Research on Subject 2 Scientific Research on Subject 2 Mathematical Models Building in Natural History** 3,78

Mathematical Models Building in Natural History** 3,22


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 105

Degree Structure for Master of Informatics

Fifth Year



Intellectual Property 1 Pedagogics of Higher School 1,5 Foreign Language 2 Foreign Language 1,94 Physical Informatics 4 General Theory of Games 2

Methods of Reliability and Risk Theory 2,5 Labour Protection in the Branch 1 Enterprise Networks 2 Expert Systems 2

System Analysis 2 Mathematical Basics of Structurally Complex Systems Security 1,89

Theory of Information Security 4 Introduction to Cryptoanalysis 2

Cryptographic Systems on Elliptic Curves 3

Information Bank Technologies and Bank Information Security 2,69


Data Security in Computer Systems** 2,44

Information Bank Technologies and Bank Information Security 2,31

Methods of Cryptographic Mechanisms Realization** 3

Design of Programme Complexes 2 Standardization in Field of Information Security** 2

Data Security in Computer Systems** 3,56 Scientific Research on Subject 3 Scientific Research on Subject 3

Elective Courses

Data Security in Specialized Information and Telecommunication Systems 3,5


Specialization:

Scientific Research on Subject 1 1,33 Scientific Research on Subject 1 1,33





___________________________________________________________________________ 106 GENERAL CATALOG 2009-2010

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Attestation Project 25,5 Science of Patent and Copyright 2 Foreign Language 2,06


Structural Methods of Pattern Recognition 4

Paper Work with Restricted Access Information 1,5

Data Analysis and Static Signals Processing 3 Scientific Research on Subject 3


Specialization:

Scientific Research on Subject 1 1,33

Total 1,33 Total


___________________________________________________________________________ www.kpi.ua 107

Speciality: Information Security in Computer Systems

and Networks

Degree Structure for Bachelor of Security of Information and Communication Systems

First Year



Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy 2 1 Foreign Language 2 Foreign Language 2



Algebra and Geometry 1 2,5 Algebra and Geometry 2 1 Algebra and Geometry 1 1 Algebra and Geometry 2 1

Discrete Analysis 1. Sets and Relations 4

Discrete Analysis 2. Functional Dependences and Structures 3,5

General Physics 1. Mechanics 3,5 Theory of Algorithms and Mathematical Logic 1 2,5

General Physics 1. Mechanics 1 Basics of Number Theory 4,5

Software Supply for PC 3 General Physics 2. Electromagnetism 4,5

Programming 1. Structural Approach 4

General Physics 2. Electromagnetism 1

Introduction to Information Security 1


Total 30 Total 31,5

Elective Courses:


Total 2 Total 2


___________________________________________________________________________ 108 GENERAL CATALOG 2009-2010

Second Year



Foreign Language 2 Philosophy 1 2,5 Ecology 2 Foreign Language 2

Mathematical Analysis 3. Analysis of Functions with Several Variables 5 Special Chapters of Mathematics 2 4 Differential Equations 4 Computer Architecture 4

Special Chapters of Mathematics 1. Theory Basics of Groups, Circuits, Finite Fields 3,5

Basics of Data Security in Information and Communication Systems 3

Theory of Algorithms and Mathematical Logic 2. Theory of Algorithms 3


General Physics 3. Quantum Physics and Structure of Matter 3,5 Operating Systems 3

General Physics 3. Quantum Physics and Structure of Matter 1

Theory of Electrical and Magnetic Circles 4


Theory of Electrical and Magnetic Circles 1

Elective Courses Special Chapters of Programming 4

Total 30 Total 31,5

Elective Courses:

Special Chapters of Programming 4

Total Total 4

Elective Courses:


Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 109

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Life Safety and Labour Protection 3,5 Theory of Probabilities and Mathematical Statistics1. Theory of Probabilities 6 Computer Networks 3 Basics of Metrology 4 Theory of Information and Coding 5 Signals and Spectrums 4 Symmetrical Cryptography 4,5 Software and Data Security 5 Basics of Radioelectronics 2 4 Basics of Radioelectronics 1 3 Industrial Practical Training 4,5 System Programming 3 Numerical Methods 4

Theoretical Fundamentals of Information Security 4

Total 30 Total 36,5 Elective Courses: Physical Training 2

Total 2 Total

Fourth Year


Psychology 2 Science of Patent 2 Sociology 2 Political Science 1,5 Foreign Language of the Professional Direction 2,06 Labour Protection 1,5

System Programming 2 Foreign Language of Professional Direction 1,94

Technical Maintenance of Information Transformation Systems 3,5 Computer Networks 2,5

Mathematical Methods of Data Security 3,61

Telecommunication Systems and Communication Networks and Technical Tools of Information Protection 2,5

Automated Information Processing Systems with Restricted Access 2

Mathematical Methods of Data Security 3,39

Confidential Information Security 3 Software Security and Its Tools of Information Security 3,5

Methods of Optimization 3,5 Complex Course Project* 1

Elective Courses Data Analysis and Static Signals Processing 3 Quality Maintenance Technology for Information Security Software Tools 4 Intellectual Systems 3



___________________________________________________________________________ 110 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Information Security in Computer

Systems and Networks

Fifth Year



Basics of Management 2 Foreign Language 1,97

Economics and Organization of Production 3 Security of Entrepreneurial Activity 2 Foreign Language 2,03 Labour Protection in the Branch 1 Intellectual Property 1 Introduction to Cryptoanalysis 3

Theory of Information and Coding 4 Methods of Cryptographic Mechanisms Realization 3,5

Enterprise Networks 3 Data Security in Computer Systems 2,94

Data Security in Computer Systems 4,06 Standardization in Field of Information Security 3

Methods of Analysis and Information Security Systems Design 4

Complex Information Security in Automated Systems 2,5

Design of Programme Complexes 2


Elective Courses




Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 111

Degree Structure for Master of Information Security in Computer Systems

and Networks

Fifth Year



Basics of Management 2 Pedagogics of Higher School 1,5

Economics and Organization of Production 3 Foreign Language 1,94 Intellectual Property 1 Security of Entrepreneurial Activity 2 Foreign Language 2 Labour Protection in the Branch 1 Theory of Information Security 4 Introduction to Cryptoanalysis 3

Enterprise Networks 3 Methods of Cryptographic Mechanisms Realization 4

Data Security in Computer Systems 4,06 Data Security in Computer Systems 2,94 Methods of Analysis and Information Security Systems Design 6

Standardization in Field of Information Security 3

Design of Programme Complexes 3 Complex Information Security in Automated Systems 3

Scientific Research on Subject 4,33


Scientific Research on Subject 4,33 Elective Courses




Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5 Science of Patent and Copyright 2 Foreign Language 2,06

Basics of Society's Sustainable Development 2 Scientific Research on Subject 4,33



___________________________________________________________________________ 112 GENERAL CATALOG 2009-2010

Speciality: Information Protection with Restricted

Access and Its Automated Processing

Degree Structure for Bachelor of Systems of Technical Information Protection

First Year



Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1 Philosophy 2. Science of Religion, Logic, Ethics, Aesthetics 1






Mathematical Analysis 1. Limits, Derivatives, Research of Functions 5,5

Mathematical Analysis 2. Integrals, Rows, Uniform Convergences 5,5

General Physics 1. Mechanics 1 Theory Basics of Function with Complex Variable 4,75

General Physics 1. Mechanics 3,5

General Physics 2. Thermodynamics and Molecular Physics 3,5

Software Supply for PC 3

General Physics 2. Thermodynamics and Molecular Physics 1

Programming 1. C++. Structural Approach 3


Technical Graphics 4 Basics of Circuit Theory, Processes and Signals 1. Electric Circuits 5

Introduction to Information Security 2

Component Base of Technical Information Protection 1. Electric and Radio Materials 2


Elective Courses:


Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 113

Second Year



Foreign Language 2 Philosophy 1 2,5 Mathematical Analysis 3. Differential and Integral Calculations for Function with Several Variables 5 Foreign Language 2

Differential Equations 3,5 Theory Basics of Function with Complex Variable 4,75

Ecology 2 General Physics 4. Optics and Quantum Physics 2

General Physics 3. Electricity and Magnetics 4

General Physics 4. Optics and Quantum Physics 4

General Physics 3. Electricity and Magnetics 1

Basics of Circuit Theory, Processes and Signals 3. Signals and Spectra 7


Component Base of Technical Information Protection. 3. Micro- and Nanoelectronics 4

Basics of Circuit Theory, Processes and Signals 2. Radiotechnical Processes 5

Circuit Engineering of Equipments for Technical Information Protection 2. Electrooptical Devices and Transmission Lines 2

Component Base of Technical Information Protection 2. Electronic Devices 3 Computer Architecture 3 Circuit Engineering of Equipments for Technical Information Protection 1. Electroacoustic Devices 2


Elective Courses:


Total 2 Total 2


___________________________________________________________________________ 114 GENERAL CATALOG 2009-2010

Third Year


Sociology 1,5 Economic Theory 2 Psychology 1,5 Foreign Language 2 Foreign Language 2 Life Safety and Labour Protection 3,5 Theory of Probabilities and Mathematical Statistics 3 Analog Signals Processing 4 Basics of Discrete Mathematics 3 Theory of Information and Coding 3

General Physics 5. Atomic and Quantum Physics 2

Fields and Waves in Systems of Information Protection 2. Antennas and Wave Transmission 5,5

Fields and Waves in Systems of Technical Information Protection 1. Technical Electrodynamics and Devices of Ultra High Frequency 7 Electrooptical Devices 2

Basics of Metrology 2 Systems of Information Record and Reproduction 3

Acoustic Systems 4 Industrial Practical Training 4,5 Radiotechnical Devices 1. Tools of Information Transmission 4 Computer Architecture 3

Radiotechnical Devices 2. Reception and Processing Tools 4

Total 30 Total 36,5

Elective Courses: Physical Training 2

Total 2 Total

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Foreign Language of Professional Direction 2 Labour Protection 1,5 Radiotechnical Devices 8 Basics of Cryptology 3 Systems of Information Record and Reproduction 4 Telecommunication Systems 4 Systems of Technical Information Protection 5

Technical Tools of Objects Protection 4

Design of Technical Information Protection Tools 3,5

Security of Information and Communication Systems 3,5

Elective Courses Mathematical Methods of Complex Physicotechnical Tasks Solving 4 Computer Networks 3

Social and Psychological Aspects of Information and Communication Processes 2



___________________________________________________________________________ www.kpi.ua 115

Degree Structure for Specialist of Information Protection with Restricted

Access and Its Automated Processing

Fifth Year



Basics of Management 2 Labour Protection 1

Foreign Language 2 Superstability of Telecommunication Systems 3

Intellectual Property 1 Design of Technical Information Protection Tools 6,5

Information-Computing Systems 4 Standardization in Field of Information Security 2

Hydro- and Acoustic Systems 3 Complex Information Security in Automated Systems 2

Processing of Broadband Signals 3,5 Radio Counter-Measures 4

Data Security in Telecommunication Systems 4

Data Security in Telecommunication Systems 4

Software Tools of Information Security 3

Elective Courses Security of Entrepreneurial Activity 2

Data Security in Specialized Information and Telecommunication Systems 3

Introduction to Cryptoanalysis 2


Sixth Year




Total 33 Total


___________________________________________________________________________ 116 GENERAL CATALOG 2009-2010

Degree Structure for Master of Information Protection with Restricted Access and Its Automated Processing

Fifth Year


Basics of Management 2 Basics of Scientific Researches 2 Economic Theory 2 Foreign Language 1,92 Intellectual Property 1 Pedagogics of Higher School 1,5 Foreign Language 2,11 Labour Protection 1

Information-Computing Systems 4 Superstability of Telecommunication Systems 3

Hydro- and Acoustic Systems 3 Standardization in Field of Information Security 2

Processing of Broadband Signals 3,5 Complex Information Security in Automated Systems 2

Data Security in Telecommunication Systems 4 Radio Counter-Measures 4 Unauthorized Access Protection Systems 4 Software Tools of Information Security 3

Elective Courses Security of Entrepreneurial Activity 2

Data Security in Specialized Information and Telecommunication Systems 3

Introduction to Cryptoanalysis 2 Total 28,61 Total 24,42

Sixth Year


Foreign Language 1,97 Preparation of Attestation Project 25,5 Philosophic Problems of Scientific Knowledge 1,5 Basics of Society's Sustainable Development 2 Science of Patent and Copyright 2 Processing of Broadband Signals 3,5 Optimal Design of Technical Information Protection Systems 3 Mathematical Methods of Complex Physicotechnical Tasks Solving 4 Design of Technical Information Protection Tools 4 Scientific Research on Subject 4,5


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INSTITUTE OF ENERGY SAVING AND ENERGY MANAGEMENT

___________________________________________________________________________ www.kpi.ua 117

Institute of Energy Saving and Energy

Management

Institute of Energy Saving and Energy Management (IEE) was founded in 1997 in NTUU “KPI” according to the agreement of Cabinet of Ministers of Ukraine dated from 05.02.1997 No. 148 “Energy Saving Complex State Program”. IEE is a fundamental basis for training, retraining and skills improvement, promotion of education in the field of electrotechnical and electromechanical equipment design, demand side management systems, energy saving and energy management in Ukraine. The main research activities:

• demand side management; • development of new eco-energy saving technologies and

equipment; • development of methods for efficient geotechnical

construction. IEE departments maintain partnership relations with many

foreign higher education institutions: Wismar and Leipzig technical higher schools, Wroclaw and Harbin polytechnic institutes, Silesian technical university, CIS educational institutions.

Today IEE scientists conduct international cooperation projects on partnership rights: in solar batteries mounting and integration in heat network; in heating improvement granted by government of Denmark; formation of network in power in countries of Central Asia; in association foundation between ten energy management faculties of Central Asia, EU countries, Eastern Europe for the purpose of regional collaboration.

http://kpi.ua/iee


___________________________________________________________________________ 118 GENERAL CATALOG 2009-2010

Speciality: Electrotechnical Systems of Electric Power

Supply

Degree Structure for Bachelor of Electric Power Engineering and Electrotechnics

First Year


History of Ukraine 1,5 Foreign Language 2 Philosophy 1 Science of Culture 1 Foreign Language 2 Ukrainian Language 1 Higher Mathematics 1 Analytic Geometry, Differential and Integral Equations 6,5

Higher Mathematics 2. Integral Calculus, Differential Equations and Theory of Probability 7

General Physics 1. Mechanics and Molecular Physics 5,5

General Physics 2. Electrostatics. Electromagnetism 5,5

Computer Engineering and Algorithmic Languages 1 5,5


Engineering Graphics 4 Technical Mechanics 4

Chemistry 2 Electrical Engineering Materials and Electrophysics 1 5

Introduction to Electric Power Engineering 2 Computer Graphics 2,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Philosophy 2,5 Foreign Language 2 Foreign Language 2 Ecology 2 Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory 5,5

Theoretical Basics of Electrical Engineering, Part 2 5,5

Basics of Metrology and Electrical Measurements 4

Electrical Part of Stations and Sub-Stations-2 3

Theoretical Basics of Electrical Engineering, Part 1 5,5 Electrical Systems and Networks 1 4 Electrical Part of Stations and Sub-Stations-1 3 Electrical Machines 1 5 Theoretical Basics of Heat Engineering 5,5

Mathematical Tasks of Power Engineering 1 3,5

Transient Phenomena in Power Supply Systems 4,5

Elective Courses Information Systems and Technologies 1 2

Information Systems and Technologies 2 2

Total 30 Total 31,5 Elective Courses: Software for Solving of Engineering and Mathematical Tasks 1 2

Software for Solving of Engineering and Mathematical Tasks 2 2

Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 119

Third Year




Economic Theories 2 Psychology 1,5 Electrical Systems and Networks 2 4,5 Sociology 1,5 Electrical Machines 2 5 Consumers of Power 5 Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5 Mathematical Tasks of Power Engineering 2 5 Automated Electric Drive 5,5 Transient Phenomena in Power Supply Systems 2 5,5 Systems of Power Supply, Part 1 5,5 Industrial Electronics 3 Energy Market 6

Elective Courses

Circuits and Electrical Equipment of Objects 4

Total 30,5 Total 35,5 Elective Courses:

Electric Apparatus and Control Means 4

Total Total 4



Science of Law 2

Usage of Microprocessor Engineering and Devices of Power Registering 5,5

Political Science 1,5 Automated Electric Drive. Part 2 4,5

Labour Protection 1,5 Basics of Power Supply Objects. Part 2 6

Electric Power Generation and Distribution 4 Theory of Automated Control 1,5

Consumers of Power. Part 3 1 Assembly and Exploitation of Power Supply Units 2

Transient Phenomena in Power Supply Systems. Part 2 1,5


Automated Electric Drive. Part 1 1,5 Basics of Power Supply Objects. Part 1 5 Economics and Organization of Production. Part 2 3,5 Foreign Language of the Professional Direction 2

Elective Courses Basics of Management 1,5 Renewable Energy Sources 2

Basics of Scientific Researches 2,5 Circuits and Electrical Equipment of Objects 4 3

Information and Communications at the Enterprise. Part 1 3

Information and Communications at the Enterprise. Part 2 3



___________________________________________________________________________ 120 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electrotechnical Systems of Electric

Power Supply

Fifth Year



Intellectual Property 1 Basics of Scientific Researches 1,5


Power Supply of Industrial and Municipal Facilities 6

Marketing in Power Industry 4,5 Relay Protection and Automatics 3

Power Supply of Industrial and Municipal Facilities 2,5 Control Systems of Power Use 3 Mathematical Modelling and Decisions Making in Power Supply Systems 3,5 Special Matters of Power Supply 2

Energy Audit and Energy-Saving Technologies 6

Global Power and Ecological Problems 1,5

Relay Protection and Automatics 2 Design Methodology and CAD 2

Control of Power Consumption Efficiency 4,5

Elective Courses

Special Matters of Power Supply 3,5 Energy Saving in Heating Production and Plants 4

Total 29,5 Total 23

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 121

Degree Structure for Master of Electrotechnical Systems of Electric Power Supply

Fifth Year


Foreign Language of the Professional Direction 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2 Power Supply of Industrial and Municipal Facilities 2,5


Marketing in Power Industry 4,5 Basics of Scientific Researches 1,5 Mathematical Modelling and Decisions Making in Power Supply Systems 3,5

Power Supply of Industrial and Municipal Facilities 5,5

Energy Audit and Energy-Saving Technologies 5 Relay Protection and Automatics 2 Relay Protection and Automatics 1,5 Control Systems of Power Use 2 Control of Power Consumption Efficiency 4,5 Control of Electric Power Quality 2 Scientific Research on Subject of Master's Attestation Project 12 Design Methodology and CAD 2

Scientific Research on Subject of Master's Attestation Project 0

Elective Courses

Special Matters of Power Supply 3,5 Energy Saving in Heating Production and Plants 4

Total 40 Total 24

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Mathematical Methods of Optimization 3 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Data-Computing Complexes of Modes Control 3 Integrated Resource Planning in Power Engineering 2 Price Formation in Energy Markets 4 Scientific Research on Subject of Master's Attestation Project 0



___________________________________________________________________________ 122 GENERAL CATALOG 2009-2010

Speciality: Energy Management

Degree Structure for Bachelor of Electric Power Engineering and

Electrotechnics


Course Title Credit Course Title Credit History of Ukraine 1,5 Foreign Language 2 Philosophy 1 Science of Culture 1 Foreign Language 2 Ukrainian Language 1 Higher Mathematics 1. Analytic Geometry, Differential and Integral Equations 6,5


General Physics 1. Mechanics and Molecular Physics 5,5





Chemistry 2 Electrical Engineering Materials and Electrophysics 1 5

Introduction to Energy Management 2 Computer Graphics 2,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Philosophy 2,5 Foreign Language 2 Foreign Language 2 Ecology 2 Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory 5,5

Theoretical Basics of Electrical Engineering, Part 2 5,5


Electrical Part of Stations and Sub-Stations-2 3

Theoretical Basics of Electrical Engineering, Part 1 5,5 Electrical Systems and Networks 1 4 Electrical Part of Stations and Sub-Stations-1 3 Electrical Machines 1 5

Technical Thermodynamics 5,5 Mathematical Tasks of Power Engineering 1 3,5

Heat and Mass Transfer 4,5 Elective Courses



Total 30 Total 31,5 Elective Courses: Software for Solving of Engineering and Mathematical Tasks 1 2

Software for Solving of Engineering and Mathematical Tasks 2 2

Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 123

Third Year




Economic Theories 2 Psychology 1,5 Electrical Systems and Networks 2 4 Sociology 1,5 Electrical Machines. Energy Saving by Means of Automated Electric Drive 4 Consumers of Power 5 Life Safety and Labour Protection 3,5 Industrial Practical Training 2 Mathematical Tasks of Power Engineering 2 4,5 Industrial Practical Training 2,5

Industrial Electronics 3

Energy Systems and Complexes. Systems of Energy Production and Distribution 4

Heat Engineering Measurements 3 Energy Market 6 Energy Systems and Complexes. Energy Sources 4,5 Systems of Power Supply 6

Elective Courses

Energy Saving of Buildings and Structures 5


Elective Courses:

Energy Saving in Transport 5 Total Total 5


___________________________________________________________________________ 124 GENERAL CATALOG 2009-2010

Fourth Year


Science of Law 2

Usage of Microprocessor Engineering and Devices of Power Registering 2,5

Political Science 1,5 Consumers of Power. Part 2 5,5 Labour Protection 1,5 Power Supply 5,5 Infrastructure of Energy Market, Part 2 5 Basics of Energy Management 3,5 Systems of Power Production and Distribution 5,5


Heat Engineering Processes and Devices, Part 2 2 Consumers of Power. Part 1 2 Transient Phenomena in Power Supply Systems 2 1,5 Economics and Organization of Production Part 2 3,5 Foreign Language of the Professional Direction 2

Elective Courses Basics of Scientific Researches 2,5 Heat Engineering Measurements 1,5 Information and Communications at the Enterprise, Part 1 2 Basics of Management 1,5

Administrative Economics in Power Engineering 4,5

Information and Communications at the Enterprise, Part 2 2,5

Total 31 Total 29


___________________________________________________________________________ www.kpi.ua 125

Degree Structure for Specialist of Energy Management

Fifth Year



Intellectual Property 1 Labour Protection in the Branch 1,5


Marketing Research in Power Engineering 4,5

Energy Audit 5 Energy Audit 1 Mathematical Modelling and Decisions Making in Energy Systems 3,5 Energy Saving in Industry 4

Energy-Saving Supply of Civil and Industrial Structures 1,5

Control of Efficiency and Management of Power Consumption Projects 3,5

Energy Saving in Industry 4 Energy Saving in Power Supply Systems 2



Measurement, Calculation and Control Systems for Power Consumption 3 Power Supply Projects Appraisal 2

Alternative and Renewable Energy Sources 1,5

Elective Courses

Administrative Economics in Power Engineering 3,5 Public Relations and Advertisement 1,5

Information Analysis of Power Consumption 2,5

Total 28,5 Total 24

Sixth Year



Pregraduation Practical Training 8 Pregraduation Practical Training 4 Preparation of Graduation Thesis 14 Preparation of Graduation Thesis 7

Total 33 Total


___________________________________________________________________________ 126 GENERAL CATALOG 2009-2010

Degree Structure for Master of Energy Management


Course Title Credit Course Title Credit Foreign Language of the Professional Direction 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2

Energy Audit 4,5 Global Power and Ecological Problems 1,5

Mathematical Modelling and Decisions Making in Power Supply Systems 3,5 Labour Protection in the Branch 1,5 Control of Efficiency and Management of Power Consumption Projects 3,5 Energy Audit 0,5 Energy-Saving Supply of Civil and Industrial Structures 1,5

Marketing Research in Power Engineering 4,5

Measurement, Calculation and Control Systems for Power Consumption 2,5


Energy Saving in Industry 3,5 Energy Saving in Industry 3,5 Alternative and Renewable Energy Sources 1,5

Energy Saving in Power Supply Systems 1,5

Research in Agreed Area 7 Research in Agreed Area 0 Research in Agreed Area 4 Research in Agreed Area 0

Elective Courses Administrative Economics in Power Engineering 3,5 Public Relations and Advertisement 1,5

Information Analysis of Power Consumption 2,5

Total 38 Total 23


Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 15,5 Mathematical Methods of Optimization 3 Preparation of Master's Thesis 10 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Data-Computing Complexes of Modes Control 3 Integrated Resource Planning in Power Engineering 2 Price Formation in Energy Markets 4 Methods of Energy Analysis in Heat Technologies 3 Research in Agreed Area 0 Research in Agreed Area 0



___________________________________________________________________________ www.kpi.ua 127

Speciality: Energy Management

Degree Structure for Bachelor of Heat Power Engineering

First Year


History of Ukraine 3 Foreign Language-1 1,5 Foreign Language-1 1,5 Ukrainian Language 2 Higher Mathematics 1. Analytic Geometry, Differential and Integral Equations 6,5

Higher Mathematics 2. Integral Calculus, Differential Equations and Theory 6,5

Physics 1. Mechanics and Molecular Physics 5,5

Physics 2. Electrostatics. Electromagnetism 5,5

Information Technologies 1. Computer Engineering and Algorithmic Languages 1 5,5

Information Technologies 2. Computer Engineering and Algorithmic Languages 2 3,5

Engineering and Computer Graphics 1 4

Engineering and Computer Graphics 2 2

Chemistry 1. Chemistry 2 Chemistry 2. Chemical Technologies of Energy 2

Introduction to Energy Management 2 Technical Mechanics 3

Theoretical Fundamentals of Electrical Engineering 5,5

Total 30 Total 31,5

Second Year


Philosophy 3 Foreign Language-2 1,5

Foreign Language-2 1,5

Technical Mechanics 2. Material Science and Technology of Constructional Materials 2 4

Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory 5 Psychology 2 Technical Thermodynamics1. Technical Thermodynamics 6 Technical Thermodynamics 2 5 Basics of Metrology and Electrical Measurements 4 Heat and Mass Transfer-1 7 Theoretical Fundamentals of Electrical Engineering-2 5,5 Electrical Systems and Complexes 4 Industrial Electronics 3 Hydrogasdynamics 6

Elective Courses Software of Engineering and Mathematical Tasks / Mathematical Tasks of Energy 2

Software of Engineering and Mathematical Tasks / Mathematical Tasks of Energy 2

Total 30 Total 31,5


___________________________________________________________________________ 128 GENERAL CATALOG 2009-2010

Third Year


Personnel Management 2 Foreign Language-3. Professional Direction 1,5

Foreign Language-3. Professional Direction 1,5 Basics of Entrepreneurship 2 Basics of Economic Theory 2 History of Ukrainian Culture 2

Ecology 2 Economics and Organization of Production 4

Life Safety and Labour Protection 2 Electric Drive 4

Technical Mechanics-2 / Technical Mechanics 4

Energy Systems and Complexes-2 / Systems of Energy Production and Distribution 5

Consumers of Electric Power 5,5 Systems of Power Supply 3 Heat Engineering Measurements 2,5 Technological Processes and Units 5,5 Energy Systems and Complexes-1 / Energy Sources 4,5

Microprocessor Equipment in Control Systems 4,5

Heat and Mass Transfer-2 4 Industrial Practical Training 4,5 Total 30 Total 36

Fourth Year


Foreign Language-2. Professional Direction 1,5 Energy Audit 5 Analysis and Management of Investment Projects 2 Ukrainian Language-2 1 Systems of Power Supply 4 Pregraduation Practical Training 4,5 Energy Systems and Complexes-3 4 Thesis Projecting 9 Energy Market 5 Basics of Energy Management 2 Control of Power Consumption Efficiency 4,5

Elective Courses Energy Saving of Buildings and Structures / Energy Saving in Transport 5

Ecological Energy Technologies / Systems and Units of Industrial Waste Burial 4

Expertise and Management of Energy Utilization Projects / Basics of Energy Objects Designing 2

Energy Saving in Industry / Energy Saving in Systems of Power Production and Distribution 5

Total 30 Total 28,5


___________________________________________________________________________ www.kpi.ua 129

Speciality: Ecology and Environmental Protection

Degree Structure for Bachelor of Ecology, Environmental Protection and

Balanced Nature Management


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics-1. Analytic Geometry, Differential and Integral Equations 6,5

Higher Mathematics-2. Integral Calculus, Differential Equations and Theory of Probability 6,5

General Physics-1. Mechanics and Molecular Physics 5,5


General Chemistry 5 Computer Science 2. Programming and Computer Engineering 3,5

Biology 5 Geology-1. General Geology 5 Computer Science-1. Programming and Computer Engineering 3,5 Basics of General Ecology 4

Special Chapters of Chemistry-1. Analytical Chemistry 3

Total 30 Total 31,5


___________________________________________________________________________ 130 GENERAL CATALOG 2009-2010

Second Year

First Semester Second Semester Philosophy Credit Course Title Credit


Philosophy 2,5 Regulation of Anthropogenic Load on Natural Environment 3,5

Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory. Probability Theory 6,5

Monitoring and Measurement Methods of Parameters 5

Geology 2. Engineering Geology 2 Ecology of Noosphere-1. Urban Ecology 2,5

Soil Science 4 Ecology of Noosphere-2. Human Ecology 3

Hydrology 3 Mechanics of Environment-2. Mechanics of Continuum 3

Metrology and Climatology 2 Geophysics. 3

Radioecology 2 Thermodynamics and Heat Exchange in Ecosystems 3

Special Chapters of Chemistry-2. Biogeochemistry 3

Computer Science of Ecosystems-1. Information Systems and Data Bases 2

Mechanics of Environment-1. Theoretical Mechanics 3

Computer Science of Ecosystems-2. Engineering and Computer Graphics 2,5

Computer Science of Ecosystems-2. Engineering and Computer Graphics 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 131

Third Year





Economic Theory 2 Psychology 1,5

Ecology of Noosphere-3. Social Ecology 2 Sociology 1,5 Ecology of Territories-1. Landscape Ecology and Preserve Activity 2 Engineering Ecology 3,28

Ecology of Territories-3. Basics of Territories and Water Areas Safety 2

Ecology of Territories-2. Topography and Cartography 2

Life Safety 3,5

Ecological Assessment and Audit-1. Management of Environmental Activity 4

Engineering Ecology 3,22

Computer Science of Ecosystems-4. Statistical Basics of Registration in Ecology 3

Mechanics of Environment-3. Geomechanics 4 Transport Ecology 4

Computer Science of Ecosystems-3. Applied Computer Systems in Ecology 2

Technology of Environment Protection-1. Protection and Rational Use of Earth Surface and Bowels 4

Thermodynamics and Heat Exchange in Ecosystems 3 Industrial Practical Training 4,5

Elective Courses Mining Technology 5,5 Mining Machines and Complexes 4


Elective Courses:

Technology of Power Engineering 5,5 Heat Processes and Equipment 4

Total 5,5 Total 4


___________________________________________________________________________ 132 GENERAL CATALOG 2009-2010

Fourth Year




Science of Law 2 Engineering Ecology 2,5


Modelling of Environmental Conditions 4

Environmental Economics 2,5 Management of Environmental Activity 4

Labour Protection 1,5 Ecology Law 2,5 Equipment for Environment Protection 2 Radioecology 2,5

Ecological Expertise, Territorial and Enterprise Certification 2,5 Basics of Management 1,5 Engineering Ecology 3 Ecological Audit 3

Modelling of Environmental Conditions 1,5

Statistical Basics of Ecology Registration 3,5

Elective Courses

Environmental Survey 3 Special Chapters of Branch Technology 1,5

Banks of Ecological Information 3

Total 25 Total 26,5

Elective Courses:

Heat Processes and Equipment 3 Introduction to Energy Management 1,5

Systems of Energy Production and Distribution 3

Total 3 Total 4,5


___________________________________________________________________________ www.kpi.ua 133

Degree Structure for Specialist of Ecology and Environmental Protection Fifth Year


Foreign Language of the Professional Direction 2 Marketing 1,5

Intellectual Property 1 Basics of Scientific Researches in Ecology 1

Protection and Rational Use of Earth Bowels 3 Labour Protection in the Branch 1,5 Technology and Protection Equipments, Rational Use of Water Resources 4,5

Protection and Rational Use of Earth Surface 3,5

Exploitation and Repairing of Ecological Systems and Plants 2

Technologies and Protection Equipments and Rational Use of Atmosphere Resources 4,5

Basics of Production Processes Automation 2 Industrial and Transport Ecology 4,5 Quality Control, Metrology and Standardization 2

Disposal and Recycling of Waste Products 3

Basics of Scientific Researches in Ecology 0,5

Resource-Saving Technologies in Industry 2,5

Designing Basics of Engineering Ecosystems 3 Modelling of Engineering Ecosystems 2,5 Bioindication and Biometry of Ecosystems 2

Elective Courses Basics of Ecological Trade 1,5 Environmental Insurance 3

International and Public Environmental Activity 1,5

Geonoma Zones and Biota 1,5 Total 26 Total 28

Specialization: Ecological Technologies in Power Engineering 3

Energy Saving in Energy Production and its Usage 2,5

Energy Audit 2,5 Alternative and Renewable Energy Sources 2

Total 7,5 Total 2,5 Specialization: Basics of Designing and Construction of Ecological Buildings 3

Resource-Saving Technologies in Mining 2,5

Treatment and Enrichment of Minerals 2,5 Mine Survey 2

Total 7,5 Total 2,5


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Preparation of Graduation Thesis 21

Total 33 Total


___________________________________________________________________________ 134 GENERAL CATALOG 2009-2010

Degree Structure for Master of Ecology and Environmental Protection


Course Title Credit Course Title Credit Foreign Language of the Professional Direction 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Marketing 1,5 Technology and Protection Equipments, Rational Use of Water Resources 4,5

Basics of Scientific Researches in Ecology 2

Quality Control, Metrology and Standardization 2 Labour Protection in the Branch 1,5

Protection and Rational Use of Earth Bowels 3

Technologies and Protection Equipments and Rational Use of Atmosphere Resources 3,5

Physical Aspects of Natural Disasters 4,5

Protection and Rational Use of Earth Surface 2,5

System Analysis in Ecology 4,5 Disposal and Recycling of Waste Products 3

Scientific Research on Subject of Master's Attestation Project 0 Industrial and Transport Ecology 4,5


Elective Courses Basics of Ecological Trade 1,5 Geonoma Zones and Biota 1,5

International and Public Environmental Activity 1,5

Environmental Insurance 3 Total 23 Total 26

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25 Science of Patent and Copyright 2 Mathematical Methods of Optimization 3 Research Methods of Ecological Environment State 3,5 Numerical Methods for Solving of Ecological Tasks 4,5 Stability of Ecosystems 4 Fundamentals of Sustainable Development 2 Scientific Research on Subject of Master's Attestation Project 10

Total 30,5 Total 25


___________________________________________________________________________ www.kpi.ua 135

Speciality: Underground Mine Development of Mineral

Deposits

Degree Structure for Bachelor of Mining


Course Title Credit Course Title Credit Foreign Language 3 Foreign Language 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics 1. Analytic Geometry, Differential and Integral Equations 6,5



General Physics-2. Electrostatics. Electromagnetism 5,5

Chemistry 5

Informatics and Computer Engineering-2. Basics of Programming 5,5

Computer Science and Computer Engineering-1. Computer Hardware and Software 4 Geology 5,5

Descriptive Geometry. Engineering Graphics 4,5

Material Science and Basics of Construction Business 1. Material Science 5

Total 31 Total 30,5


Course Title Credit Course Title Credit Foreign Language 3 Foreign Language 1 Philosophy 2,5 Ecology 2 Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory. Probability Theory 6,5

Applied Mechanics-1. Strength of Materials 5,5

Informatics and Computer Engineering-3. Computer Graphics 4

Applied Mechanics-2. Theory of Mechanisms and Machines. Machines Details 2,5

Theoretical Mechanics 3,5 Hydromechanics 4 Basics of Mining Industry 5 Thermodynamics. 3

Mechanics of Rocks 6,5

Material Science and Basics of Construction Business 2. Basics of Building Business 4,5

Geodesy and Mine Survey-1. Geodesy 8

Total 31 Total 30,5


___________________________________________________________________________ 136 GENERAL CATALOG 2009-2010

Third Year




Economic Theories 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Basics of Metrology, Standardization and Certification 3 Aerology of Industries 4 Destruction of Rocks 4 Basics of Transport Theory 3

Mining Machines and Complexes 3 Electrical Engineering and Basics of Electronics 3

Underground Mining 4 Industrial Practical Training 4,5 Open Cast Mining 7 Mining Machines and Complexes 3 Underground Mining 6 Open Cast Mining 3

Elective Courses Appraisal and Passport System of Deposits 2 Recultivation of Earth Surface 4


Fourth Year


Science of Law 2 Power Supply and Electric Drive 3,5 Political Science 1,5 Aerology of Industries 4 Labour Protection in the Branch 1,5 Basics of Management 1,5

Power Supply and Electric Drive 1,5 Foreign Language of the Professional Direction 2

Basics of Automation 2 Fixed Installations 3 Economics and Organization of Production 3 Open Cast Mining 1,78 Foreign Language of the Professional Direction 2 Recultivation of Earth Surface 4

Basics of Mine Survey 4 Appraisal and Passport System of Deposits 3

Open Cast Mining 8,72 Elective Courses

Safety of Technological Processes in Mining 3 Waste-Free Mine Technologies 3,5 Methodology of Researches and Patenting 3 Multimedia and Net Technologies 2,5



___________________________________________________________________________ www.kpi.ua 137

Degree Structure for Specialist of Underground Mine Development of

Mineral Deposits

Fifth Year



Foreign Language 2 Marketing 1,5 Intellectual Property 1 Labour Protection in the Branch 1,5

Engineering Ecology, Ecological Appraisal and Certification 2

Operation and Repairing of Equipment Systems 3

Reconstruction of Mining Plants 3 Computer-Aided Design Systems in Mining 4

Designing of Mine Enterprises 4 Hydrogeology, Draining and Pumping 3

Projecting of Blasting 4,5 Equipment and Technology of Rocks Processing 5

Mining Technology of Mineral Deposits 5,5

Designing of Mine Plants for Openworking 5

Elective Courses

Law Matters in Mining 2,5

Extraction of Mineral Deposits from the Bottom of Seas and Oceans 2

Gemology 3

Total 27,5 Total 25

Sixth Year




Total 33 Total


___________________________________________________________________________ 138 GENERAL CATALOG 2009-2010

Degree Structure for Master of Underground Mine Development of Mineral Deposits

Fifth Year


Foreign Language 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2 Reconstruction of Mining Plants 3 Marketing 1,5 Designing of Mine Enterprises 3 Labour Protection in the Branch 1,5

Projecting of Blasting 4 Computer-Aided Design Systems in Mining 3

Mining Technology of Mineral Deposits 4,5

Operation and Repairing of Equipment Systems 2

Complex Use of Rocks 2,5 Hydrogeology, Draining and Pumping 3

Scientific Research on Subject of Attestation Project 0

Designing of Mine Plants for Openworking 4,5

Equipment and Technology of Rocks Processing 4,5

Scientific Research and Preparation of Attestation Project 0

Elective Courses

Law Matters in Mining 2,5

Extraction of Mineral Deposits from the Bottom of Seas and Oceans 2

Gemology 3 Total 25,5 Total 25,5

Sixth Year



Preparation and Defence of Master's Attestation Project 25,5

Mathematical Methods of Optimization 3 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Cyclic and Streaming Technologies at Opencast Mine 3 Physical Processes of Mining 2 Scientific Research on Subject of Attestation Project 14



___________________________________________________________________________ www.kpi.ua 139

Speciality: Mine and Underground Construction

Degree Structure for Bachelor of Mining

First Year


Foreign Language 2 Foreign Language 2 Philosophy-2. Science of Religion, Logic, Ethics and Aesthetics 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics-1. Analytic Geometry, Differential and Integral Equations 6,5




Chemistry 5

Informatics and Computer Engineering-2. Basics of Programming 5,5

Computer Science and Computer Engineering-1. Computer Hardware and Software 4 Geology 5,5

Descriptive Geometry. Engineering Graphics 4,5

Material Science and Basics of Construction Business 1. Material Science 5

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Philosophy-1 2,5 Ecology 2 Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory. Probability Theory 6,5

Applied Mechanics. Strength of Materials 5,5

Informatics and Computer Engineering-3. Computer Graphics 4

Applied Mechanics. Theory of Machines and Mechanisms 2,5

Theoretical Mechanics. 3,5 Hydromechanics 4 Basics of Mining Industry 5 Thermodynamics 3

Mechanics of Rocks 6,5

Material Science and Basics of Construction Business 2. Basics of Building Business 4,5

Geodesy and Mine Survey-1. Geodesy 8

Total 30 Total 31,5


___________________________________________________________________________ 140 GENERAL CATALOG 2009-2010

Third Year




Economic Theories 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Basics of Metrology, Standardization and Certification 3 Aerology of Industries 4 Destruction of Rocks 4 Basics of Transport Theory 3 Technology and Mechanization of Underground Construction 6

Electrical Engineering and Basics of Electronics 3

Construction Technology and Reconstruction of Mine Excavations 2 Industrial Practical Training 4,5

Materials and Constructions of Mine Buildings 5

Construction Technology and Reconstruction of Mine Excavations 10

Elective Courses Structural Mechanics 3 Substructures and Foundations 6


Fourth Year


Science of Law 2 Power Supply and Electric Drive 3,5 Political Science 1,5 Aerology of Industries 4 Labour Protection in the Branch 1,5 Basics of Management 1,5

Power Supply and Electric Drive 1,5 Foreign Language of the Professional Direction 2

Basics of Automation 2 Fixed Installations 3 Economics and Organization of Production 3

Construction of Urban Underground Structures 5,5

Foreign Language of the Professional Direction 2 Engineering Search Operations 1,5 Basics of Mine Survey 4 Substructures and Foundations 6 Structural Mechanics 3,5

Elective Courses Methodology of Researches and Science of Patent 3 Projecting of Blasting 3 Construction of Urban Underground Structures in Difficult Conditions 2 Multimedia and Net Technologies 3,5

Total 32 Total 27,5


___________________________________________________________________________ www.kpi.ua 141

Degree Structure for Specialist of Mine and Underground Construction

Fifth Year



Foreign Language 2 Marketing 1,5

Intellectual Property 1 Hydrogeology, Draining and Pumping 3

Computer-Aided Design Systems for Construction of Underground Structures 4

Computer-Aided Design Systems for Construction of Underground Structures 1

Mine Technical Buildings, Structures and Central Buildings 5 Labour Protection in the Branch 1,5

Designing of Mine Enterprises 4 Mine Technical Buildings, Structures and Central Buildings 2

Reconstruction of Underground Enterprises 4

Architectural and Building Designing 4

Special Course in Underground Construction 3

Special Course in Underground Construction 1

Designing of Urban Underground Structures 5

Construction of Special-Purpose Underground Structures 3

Elective Courses

Designing of Underground Structures 2

Computer Modelling of Underground Buildings 4

Designing of Underground Structures in Difficult Conditions 1,5

Total 30 Total 22,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 142 GENERAL CATALOG 2009-2010

Degree Structure for Master of Mine and Underground Construction

Fifth Year


Foreign Language 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Basics of Scientific Researches 2 Computer-Aided Design Systems for Construction of Underground Structures 2,5 Marketing 1,5 Mine Technical Buildings, Structures and Central Buildings 3,5 Labour Protection in the Branch 1,5

Designing of Mine Enterprises 3 Hydrogeology, Draining and Pumping 2

Reconstruction of Underground Enterprises 4

Computer-Aided Design Systems for Construction of Underground Structures 0,5

Designing of Urban Underground Structures 4,5

Mine Technical Buildings, Structures and Central Buildings 1

Special Course in Underground Construction 2,5

Special Course in Underground Construction 0,5

Engineering Geodynamics 2 Construction of Special-Purpose Underground Structures 2,5


Architectural and Building Designing 4


Elective Courses Designing of Underground Structures 2

Computer Modelling of Underground Buildings 4

Designing of Underground Structures in Difficult Conditions 1,5

Total 27 Total 22,5


___________________________________________________________________________ www.kpi.ua 143

Sixth Year



Preparation and Defence of Master's Thesis 25,5

Mathematical Methods of Optimization 3 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Geotechnical Construction in Difficult Geoengineering Conditions 1,5 Energy-Saving and Source-Saving Technologies in the Underground and Mine Constructions 1,5 Geoinformation Systems and Geomonitoring of Emergency Geotechnical Situations 2 Scientific Research on Subject of Attestation Project 15,5

Total 32 Total 25,5


___________________________________________________________________________ 144 GENERAL CATALOG 2009-2010

Speciality: Electromechanical Systems of Automation

and Electric Drive

Degree Structure for Bachelor of Electromechanics


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 History of Ukraine 1,5 Science of Culture 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Ukrainian Language 1 Higher Mathematics 1. Analytic Geometry, Differential and Integral Equations 6,5

Higher Mathematics 2. Integral Calculus, Differential Equations and Theory of Series 6,5

General Physics 1. Mechanics and Molecular Physics. Heat 5,5

General Physics-2. Electrostatics. Electromagnetism. 5,5

Computer Engineering and Programming-1. Programming and Basics of Algorithmization 5,5

Computer Engineering and Programming-2. Integrated Systems of Calculus Mathematics 5

Engineering and Computer Graphics 4 Theoretical Mechanics 6

Introduction to Electromechanics 2

Material Science. Constructive and Electrical Engineering Materials 2. Electrical Engineering Materials 2

Material Science. Constructive and Electrical Engineering Materials 1. Technology of Constructional Materials 2 Generic Graphical Systems 2,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 145

Second Year


Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory. Probability Theory 6,5

Theoretical Basics of Electrical Engineering-2. Nonlinear Systems. Transient Phenomena 6

Applied Mechanics 6 Theory of Automated Control-1. Linear Systems 4,5

Theoretical Basics of Electrical Engineering-1. Linear Systems 6 Electric Apparatus 3 Basics of Metrology and Electrical Measurements 3

Power Electronics and Transforming Equipment 7

Hydraulics and Fluid Drive 2,5

Thermodynamics and Heat Exchange 2

Elective Courses Information Computational Systems and Technologies 4

Technological Complexes and Units 2,5


Operating Systems 4 Mining Technology and Mechanization 2,5

Total 4 Total 2,5

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Sociology 1,5 Theory of Automated Control-2. Nonlinear Systems and Optimal Control 7 Psychology 1,5 Electrical Machines 7 Electric Drive Theory 7,5 Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5

Thermodynamics and Heat Exchange 2

Synthesis of Electronic and Microprocessor Devices-2. Synthesis of Microprocessor Devices 3

Synthesis of Electronic and Microprocessor Devices-1. Basics of Electronic Devices Synthesis 4,5

Automation of Typical Plants and Complexes-2. Automation of Technological Processes 6

Automation of Typical Plants and Complexes-1 Elements and Devices of Automatics 2,5

Mechanical Equipment of Technological Machines and Units-2. Stationary Installations 4

Power Supply for Industrial Enterprises 6

Total 30,5 Total 36


___________________________________________________________________________ 146 GENERAL CATALOG 2009-2010

Fourth Year



Science of Law 2 Electromechanical Systems Modelling 5,5

Political Science 1,5 Foreign Language of the Professional Direction 1,5



Synthesis of Electronic and Microprocessor Devices 3,5 Fixed Installations 3,5 Electric Drive Theory 4,5 Machines and Plants Electric Drive 3,5

Labour Protection 1,5 CAD Basics for Electrical Devices and Systems 5

Control and Regulation Systems of Semiconductor Transformers 2,5 Management 1,5

Basics of Scientific Researches and Science of Patent 1,5



Elective Courses

Microprocessor Control Systems of Power Engineering Complexes** 3

Optimal Control of Electromechanical Systems** 4

Legal Basics of Energy Usage 5,5



___________________________________________________________________________ www.kpi.ua 147

Degree Structure for Specialist of Electromechanical Systems of Automation and Electric Drive

Fifth Year


Foreign Language 2 Marketing 1,5

Intellectual Property 1 Automated Systems of Information Controling and Processing 2,75

Automated Control of Electric Drive Machines and Plants 4,5 Energy Saving in Electric Drive 1,5 Intellectual Systems of Automated Control 4

Information Gathering and Transmission Systems 2,5

Automated Systems of Information Controling and Processing 2,25

Electric Equipment, Automated Ventillation and Conditioning Systems 4

Computer Modelling of Processes and Systems 4 Labour Protection in the Branch 1,5

Assembly and Exploitation of Electromechanical Equipments 1,5

Control and Assessment Systems of Power Consumption, Heat and Water Supply 3

Electromechanical Systems and Complexes of Alternative and Renewable Energy Sources 1

Electrical Equipment, Power Supply Machinery and Civil Buildings Plants 3

Electrical Equipment, Power Supply Machinery and Civil Buildings Plants 4

Monitoring Systems of Protection and Observation 1

Elective Courses Energy Management in Manufactoring Systems** 3,5

Digital Systems of Electric Drive Control 4

Total 27,75 Total 24,75 Specialization: Electric Equipment, Power Supply Machinery and Plants of Mine Industries 4

Automation of Plants and Complexes in Mining Production 4

Industrial Safety in Mining 1,5

Mining Technology and Mechanization 1,5


Electric Equipment, Power Supply Machinery and Plants of Mine Industries 3

Blasting Operations 1 Total 4 Total 12,5

Sixth Year



Total 33 Total


___________________________________________________________________________ 148 GENERAL CATALOG 2009-2010

Degree Structure for Master of Electromechanical Systems of Automation and Electric Drive

Fifth Year


Foreign Language 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Marketing 1,5 Mathematical Modelling of Systems and Processes 5 Basics of Scientific Researches 2 Intellectual Systems of Automated Control 4


Automated Control of Electric Drive Machines and Plants 4,5

Gathering and Transmission Systems 2,5




Automation of Plants and Complexes in Mining Production 4




Industrial Safety in Mining 1,5 Blasting Operations 1


Elective Courses Energy Management in Manufactoring Systems* 3,5

Digital Systems of Electric Drive Control 4





Science of Patent and Copyright 2 Preparation of Master's Attestation Project 25,5

Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 1 Neural Networks in Electromechanical Systems Control 3 Control Modes Optimization and Choosing of Electric Equipment Fixed Installations 2,5 Scientific Research on Subject of Master's Attestation Project 2,5



___________________________________________________________________________ www.kpi.ua 149

Speciality: Electric and Mechanical Equipment for

Power-Consuming Productions




Foreign Language 2 Foreign Language 2 Philosophy 1,5 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics 1. Analytic Geometry, Differential and Integral Calculus 6,5

Higher Mathematics 2. Integral Calculus, Differential Equations and Theory of Series 6,5

General Physics 1. Mechanics. Molecular Physics 5,5

General Physics 2. Electrostatistics. Electromagnetism 5,5

Computer Engineering and Programming-1. PC Building and Programming 5,5

Computer Engineering and Programming-2. Methods of Calculus Mathematics 4,5

Engineering Graphics 4 Theoretical Mechanics 6

Chemistry 2

Material Science. Constructive and Electrical Engineering Materials-2. Electrical Engineering Materials 2,5

Material Science. Constructive and Electrical Engineering Materials-1. Technology of Constructive Materials 2 Computer Graphics 2,5



___________________________________________________________________________ 150 GENERAL CATALOG 2009-2010

Second Year



Philosophy 2

Applied Mechanics-2. Theory of Mechanisms and Machines. Machines Details 3,5

Higher Mathematics 3. Multiple Integrals. Function of Complex Variable Theory. Probability Theory 6,5 Ecology 2

Applied Mechanics-1. Strength of Materials 4

Theoretical Basics of Electrical Engineering-2. Nonlinear Systems. Transient Phenomena 6

Theoretical Basics of Electrical Engineering-1. Linear Systems 6 Electronics and Microcircuitry 7 Basics of Metrology and Electrical Measurements 3 Hydraulics and Fluid Drive 4 Thermodynamics and Heat Transmission 3 Mining 3,5

Electric Apparatus and Control Means 3,5

Elective Courses Information Systems and Data Bases 3

Total 30,5 Total 30,5 Elective Courses: Modern Software in Solving of Engineering and Mathematical Tasks 3

Total 3 Total


___________________________________________________________________________ www.kpi.ua 151

Third Year


Economic Theories 2 Psychology 1,5 Foreign Language of the Professional Direction 2 Sociology 1,5

Life Safety and Labour Protection 3,5 Foreign Language of the Professional Direction 2

Theory of Automated Control 7 Theory of Electric Drive 8 Electrical Machines 7 Industrial Practical Training 4,5 Pumping, Ventilation and Pneumatic Installations 6

Machines and Equipments of Geotechnical Productions 6,5

Power Supply for Industrial Enterprises 6,5

Elective Courses Microprocessor-Based Devices in Machines Control 3

Multimedia Systems and Internet Technologies 3,5

Designing of Elements for Mechatronics Equipments of Subways and Construction of Urban Underground Structures 2

Total 30,5 Total 36 Elective Courses: Control Systems of Electromechanical Equipment 3

Hypermedia Systems in Electromechanics 3,5

Designing of Elements for Mechatronics Machines of Oil and Mine Productions 2

Total 3 Total 5,5


___________________________________________________________________________ 152 GENERAL CATALOG 2009-2010

Fourth Year


Science of Law 2 Computer Modelling of Electomechanical Systems 2


Computer Modelling of Electomechanical Systems 2,5 Transport and Lifting Engines 1,5 Foreign Language of the Professional Direction 2

Power Supply for Industrial Enterprises 2,5

Theory of Electric Drive 4 Blasting Operations 1,5 Pumping, Ventilation and Pneumatic Installations 1,5 Basics of Management 1,5 Economics and Organization of Production 2 Design Methodology and CAD 2,5

Transport and Lifting Engines 1,5 Machines and Equipments of Power-Consuming Productions 4


Microprocessor-Based Devices in Machines Control 1,5

Labour Protection 1,5 Elective Courses

Reliability of Electromechanical Equipments 2

Reliability of Electromechanical Equipments 2

Modelling of Electromechanical Equipments Features 2,5

Modelling of Electromechanical Equipments Features 3

Engineering Elements of Impact Action Mining Machines 2

Total 26 Total 26


___________________________________________________________________________ www.kpi.ua 153

Degree Structure for Specialist of Electric and Mechanical Equipment for Power-Consuming Productions

Fifth Year


Foreign Language of the Professional Direction 2 Marketing 1,5


Electric Drive of Machines and Power-Consuming Production Facilities 2

Applied Computer-Aided Design Systems of Electromechanical Systems 3,5 Monitoring and CAD Systems 2 Automation of Electromechanical Plants and Complexes 3

Assembly, Exploitation and Repair of Electromechanical Equipments 1,5

Electric Drive of Machines and Power-Consuming Production Facilities 2,5

Intellectual Energy-Saving Manipulators and Equipment of Mining and Oil-gas Production 4,5

Monitoring and CAD Systems 2,5

Electrical Equipment and Power Supply of Mining and Oil-gas Productions 3,5

Assembly, Exploitation and Repair of Electromechanical Equipments 1,5

Technical Diagnostics of Electromechanical Equipment 3,5

Exploitation Technology of Oil-gas Deposits 1,5 Labour Protection in the Branch 1,5 Intellectual Energy-Saving Manipulators and Equipment of Mining and Oil-gas Production 3,5 Electrical Equipment and Power Supply of Mining and Oil-gas Productions 3,5

Elective Courses Virtual Models of Electromechanical Equipment 3

Virtual Models of Electromechanical Equipment 3

Basics of Energy Management 1,5 Total 27,5 Total 24,5

Specialization:

Construction of Urban Underground Structures 1,5

Intellectual Energy-Saving Manipulators and Equipment for Subways and Constructions 4,5

Intellectual Energy-Saving Manipulators and Equipment for Subways and Constructions 3,5

Electrical Equipment, Power Supply of Subways and Construction of Urban Underground Structures 3,5

Electrical Equipment, Power Supply of Subways and Construction of Urban Underground Structures 3,5

Total 8,5 Total 8


___________________________________________________________________________ 154 GENERAL CATALOG 2009-2010

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 155

Degree Structure for Master of Electric and Mechanical Equipment for Power-Consuming Productions

Fifth Year


Foreign Language of the Professional Direction 2 Pedagogics of Higher School 1,5 Intellectual Property 1 Marketing 1,5 Applied Computer-Aided Design Systems of Electromechanical Systems 3,5 Basics of Scientific Researches 2

Automation of Electromechanical Plants and Complexes 3

Electric Drive of Machines and Power-Consuming Production Facilities 2

Electric Drive of Machines and Power-Consuming Production Facilities 2,5 Monitoring and CAD Systems 2

Monitoring and CAD Systems 2,5 Technical Diagnostics of Electromechanical Equipment 3,5





Labour Protection in the Branch 1,5 Elective Courses



Basics of Energy Management 1,5 Total 24,5 Total 26,5

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Problems of Society's Sustainable Development 2 Science of Patent and Copyright 2 Mathematical Methods of Optimization 3 Statistical Modelling of Power-Consuming Electromechanical Systems 3,5 Intellectual Energy-Saving Complexes of Geotechnical Productions 3 System-Dependent Packages of Information Processing 3 Scientific Research on Subject of Master's Attestation Project 10 Preparation of Master's Attestation Project 25

Total 53 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INSTITUTE OF PUBLISHING AND PRINTING

___________________________________________________________________________ www.kpi.ua 157

Institute of Publishing and Printing

Institute of Publishing and Printing (IPP) was founded in 1959 as one of subdivisions of Ukrainian institute of Publishing and Printing named after I. Fyodorov (at present Ukrainian academy of Printing, located in Lviv city). In 1989 the faculty was included in Kiev Polytechnic Institute.

The Institute includes 6 departments: • Department of Printing Production Technologies; • Department of Reprography; • Department of Machines and Units in Publishing and

Printing; • Department of Publishing Business and Editing; • Department of Graphics; • Department of Publishing, Printing and Distribution of

Books. IPP organizes international scientific and technical conferences

“Printing young” and “Printing technology and equipment”. The Department of Printing Production Technologies provides

training for future multifunctional production engineers that can work in publishing and printing enterprises and plants which publish books, magazines, newspapers and advertising products.

The Department of Reprography provides training for future production engineers, design and operating engineers of publishing and printing equipment and also peripherals of publishing and printing computerized systems.

The Department of Machines and Units in Publishing and Printing provides training for mechanical engineers in development, designing, operation and repair of publishing and printing machines.


___________________________________________________________________________ 158 GENERAL CATALOG 2009-2010

The Department of Publishing, Printing and Distribution of Books provides training for future economist managers of publishing and printing enterprises, economist managers as distributors of printed production.

The Department of Graphics provides training for future graphic painters in design of printed production.

The Department of Publishing Business and Editing provides training for future experts in publishing business and editing and engineers in computer technologies of publishing and printing productions.

http://kpi.ua/vpi/


___________________________________________________________________________ www.kpi.ua 159

Speciality: Fine Arts and Decorative Applied Art

Degree Structure for Bachelor of Fine Art


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5

Drawing and Perspective 1 7 Philosophy (Ethics, Aesthetics, Logics and Religion Science) 1,5

Painting 1 6 Science of Culture 1 Composition of Publishing 1 3 Drawing and Perspective 2 6,5 History of Arts 1 3 Surface Anatomy 2,5 Art of Letter and Ornament 1 2 Painting 2 7,5 Basics of Perspective 1 Composition of Publishing 2 2,5 History of Arts 2 3 Art of Letter and Ornament 2 1

Elective Courses Basics of Composition 3 Analytical Drawing 2,33 Analytical Drawing 2,33


Basics of Composition 3 Analytical Drawing 2,33 Analytical Drawing 2,33


Second Year


Foreign Language 2 Foreign Language 2 Drawing and Perspective 3 7 Philosophy 3 Surface Anatomy 2,5 Drawing and Perspective 4 6,5 Painting 3 6 Painting 4 7,5 Ecology 2 Composition of Publishing 4 3,5 Composition of Publishing 3 2 History of Arts 4 2 History of Arts 3 2 Art of Letter and Ornament 4 1 Art of Letter and Ornament 3 3 Stamp 1,5 Stamp 1,5 Publishing Photographics 1

Publishing Photographics 1 Color in Designing of Printed Production 2

Elective Courses Analytical Drawing 2,33


Analytical Drawing 2,33 Total Total 2,33


___________________________________________________________________________ 160 GENERAL CATALOG 2009-2010

Third Year


Course Title Credit Course Title Credit Psychology 2 Economic Theory 3 Sociology 2 Foreign Language 2 Foreign Language 2 Drawing and Perspective 6 7 Drawing and Perspective 5 7 Painting 6 7 Painting 5 7 History of Book Art 1 Composition of Publishing 5 3 Composition of Publishing 6 3 Computer Graphics 1,26 Creative Artistic Practice 4,5 Stamp 1 Life Safety 3,5 Technology of Publishing and Printing Production 1 Computer Graphics 1,24 Literary Basics of Illustration 1 Stamp 1

Technology of Publishing and Printing Production 1

Elective Courses

Analytical Drawing 2 History of Decorative and Applied Art 1,5


Analytical Drawing 2 History of Decorative and Applied Art 1,5

Total 2 Total 1,5

Fourth Year


History of Book Art 2,01 Science of Law 2 Drawing and Perspective 4,75 Political Science 1,5 Painting 4,75 History of Book Art 1,99 Composition of Publishing 4,47 Drawing and Perspective 4,75 Stamp 1,26 Painting 4,75 Computer Graphics 1,74 Composition of Publishing 4,53 Foreign Language of Professional Direction 2,25 Labour Protection 1,5

Publishing and Printing Materials 1 Stamp 1,24

Preparation of Diploma Project 1,5 Computer Graphics 1,76

Foreign Language of Professional Direction 2,25

Elective Courses Drawing 2,75 Drawing 2,75 Painting 2,5 Painting 2,5



___________________________________________________________________________ www.kpi.ua 161

Degree Structure for Specialist of Fine Arts and Decorative Applied Art

Fifth Year


Foreign Language 0,97 Intellectual Property 1 Drawing and Perspective 5,5 Foreign Language 1,03 Painting 5,5 Drawing and Perspective 5,5 Composition of Publishing 3,99 Painting 5,5 Stamp 2 Composition of Publishing 4,01 Computer Graphics 2,99 Computer Graphics 3,01 Basics of Management and Marketing 2

Economics of Publishing and Printing Trade 2

Elective Courses Drawing 1,99 Drawing 2,01 Painting 1,75 Painting 1,75


Sixth Year



Graduation Thesis Projecting 21 Pregraduation Practical Training 12

Total 33 Total


___________________________________________________________________________ 162 GENERAL CATALOG 2009-2010

Speciality: Publishing Trade and Editing

Degree Structure for Bachelor of Publishing and Editing



Foreign Language 2 Foreign Language 2 Introduction to Speciality 5 History of Ukraine 1,5 History of Ukrainian Literature-1. Basics of Literature and Criticism Theory 7

Philosophy (Ethics, Aesthetics, Science of Religion, Logics) 1,5

History of World Literature-1. History of Ancient Literature-Literature of the XVIII century. 1,33 Science of Culture 1 Modern Ukrainian Language-1. Lexis 4,44

History of Ukrainian Literature-2. Ancient and New Literature 3,5

Practice in Ukrainian Language-1. Ukrainian Spelling 7,19

History of World Literature-1. History of Ancient Literature-Literature of the XVIII century. 2,67

Computer Engineering and Programming 2

Modern Ukrainian Language-1. Lexis 5,56

Publishing and Printing Presses and Technology 2

Practice in Ukrainian Language-1. Ukrainian Spelling 4,81

Basics of Publishing Trade and Editing-1. Editing (general course) 5,42

Rhetoric 3 Total 30,96 Total 30,96


___________________________________________________________________________ www.kpi.ua 163

Second Year


Foreign Language 2 Foreign Language 2 History of Ukrainian Literature-3. Newer and Modern Literature 2,5 Philosophy 3 History of World Literature-2. History of World Literature of the XIX-XX cc. 2

History of Ukrainian Literature-3. Ancient and New Literature 2,5

Modern Ukrainian Language-3. Morphology 3

History of World Literature-2. History of World Literature of the XIX-XX cc. 4

Ecology 2 Modern Ukrainian Language-3. Morphology 4

Practice in Ukrainian Language-2. Business Ukrainian 2

Basics of Publishing Trade and Editing-1. Editing (general course) 4,33

Basics of Publishing Trade and Editing-1. Editing (general course) 3,25 Literary Editing 3,61 Basics of Publishing Trade and Editing-2. Correcting 3

Editorial Analysis and Preparation of Edition 3,5

Editing of Translation 2,39 Practical Training in Correction 4,5 Basics of Professional Communication 5 Literary Editing 4

Elective Courses Small Publishing Forms 3



___________________________________________________________________________ 164 GENERAL CATALOG 2009-2010

Third Year


Psychology 2 Economic Theory 3 Sociology 2 Foreign Language 2

Foreign Language 2 Modern Ukrainian Language-3. Syntax 4,56

Modern Ukrainian Language-3. Syntax 3,44 Practical Stylistics 3,44 Practical Stylistics 4,56 Technical Editing 3 Bibliography and Standardization in Publishing Trade-1. General Bibliography 2

Editing of Other Literature Arts-1. Editing of Course Books 5

Bibliography and Standardization in Publishing Trade-2. Publishing Standards 2


Editorial Analysis and Preparation of Edition 4 Life Safety and Labour Protection 3,5 Foreign Language of Professional Direction 1,89 Practical Training in Editing 4,5 Network Electronic Editions 2 Makeup and Page Planning 3,5 Makeup and Page Planning 3,5

Elective Courses Basics of Journalism 2


Fourth Year


Practical Stylistics 2 Science of Law 2 Preparation of Internet Sites 3 Political Science 1,5 Makeup and Page Planning 3 Theory of Abstract 3 Automatic Systems for Editing and Publishing Process 4

Automatic Systems for Editing and Publishing Process 3

Publishers in Market Environment 4 Labour Protection 1,5 Foreign Language of Professional Direction 1,86


Mass Media 2 Elective Courses

History of Publishing Trade 2 Editorial Preparation of Encyclopaedic Publications 3

Basics of Journalism 3 History of Publishing Trade 3 Editing of Technical Literature 3 Editing of Newspaper 5



___________________________________________________________________________ www.kpi.ua 165

Degree Structure for Specialist of Publishing Trade and Editing

Fifth Year




Advertising 3 Organization and Economics of Publishing Trade 2

History of Publishing Trade 3 Linguistics of Text 5

Actual Problems of Ukrainian Terminology Science 3 Culture of Language 3

Editing of Documents 3 Basics of Marketing and Management 1,5

Editing of Popular-Science Literature 3 Source Studies 3 Editorial Mastership 4 Basics of Scientific Researches 2 Editing of Abstractive Text 3 Preparation of Publication 3

Decorative and Graphic Arts Design of Book 3 Elective Courses

Textological Problems of Editorial Treatment 1

Textological Problems of Editorial Treatment 5

Total 27 Total 25,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 166 GENERAL CATALOG 2009-2010

Speciality: Management of Enterprises

Degree Structure for Bachelor of Management

First Year



Foreign Language 2 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5

Higher Mathematics-1. Linear Algebra. Differential Equations 4

Philosophy (Ethics, Aesthetics, Science of Religion, Logic) 1,5

Informatics, Computing, Computer Networks and Telecommunications-1. Informatics 4 Science of Culture 1

Basics of Economic Theory 4 Higher Mathematics-2. Integral Calculus 5

Publishing and Printing Materials and Processes, Modern Equipment 3

Informatics, Computing, Computer Networks and Telecommunications-1. Computing 5

Publishing and Printing Materials and Processes, Modern Equipment 5 Macroeconomics 5

Manufacturing Technology of Printed Production-1. Prepress Processes 3

History of Publishing Trade in Ukraine 4

World Theory and History of Publishing and Book Trade 4

Manufacturing Technology of Printed Production-2. Press Processes 4

Theory and History of Publishing and Book Trade 3

Machines and Equipment of Publishing and Printing Houses-1. Pre-printing and Printing Equipments 3,5

Information and Bibliographical Activity 4

Assortment of Publishing Production 3,5

Computer Graphics 2 Records Management 3

Total 39 Total 39


___________________________________________________________________________ www.kpi.ua 167

Second Year



Foreign Language 2 Foreign Language 2 Ecology 2 Philosophy 3

Theory of Probability and Mathematical Statistics 3 Research of Operations 3 Mathematical Programming 3 Econometrics 4

Informatics, Computing, Computer Networks and Telecommunications 2

Economics of Publishing and Printing Enterprises 6

Microeconomics 5

Accounting and Audit-2. Accounting and Audit in Publishing and Printing Enterprises 5

Statistics 5 Basics of Business Activity 4

Manufacturing Technology of Printed Production-3. Postpress Processes 5

Machines and Equipment of Publishing and Printing Houses-1. Preprinting and Printing Equipments 3 Organization of Trade 3,5

Elective Courses

Economics and Management in Publishing and Printing Industry 4,5

Economics and Management of Book Trade 4,5

Total 38 Total 31,5

Elective Courses:

Advertising and Promoting of Printed Production 4,5 Industrial Potential of Enterprise 4,5

Total 4,5 Total 4,5


___________________________________________________________________________ 168 GENERAL CATALOG 2009-2010

Third Year




Psychology 2 Life Safety and Labour Protection 3,5

Sociology 2

Basics of Management-1. Strategical Planning, Implementing of Strategies 4

Theory of Economical Analysis 4 Practical Training 4,5

Economy and Labour Law 2

Economics and Management in Publishing Trade-2. Economics of Publishing Trade 4

Accounting and Audit-2. Accounting and Audit in Publishing and Printing Houses 5

Economical Analysis of Publishing and Printing Houses 5

Accounting and Audit-2. Accounting and Audit in Publishing and Printing Houses 5

Economical Analysis of Publishing Book Trading Organizations 5

Marketing 5 Organization of Production and Equipment Exploitation 6

Organization, Quota Setting, Remuneration of Labour 5

Organization and Sales Technology of Printed Production 5,17

Theory and Practice of Bibliology 5 Economics and Management of Printing and Publishing Trade-1. Management of Publishing Trade 3

Elective Courses Potential of Enterprise 4,5 Old and Used Book 4,5 Logistics 3


Elective Courses:

Management of Enterprise's Competitive Ability 4,5

Advertising 3

Total Total 7,5


___________________________________________________________________________ www.kpi.ua 169

Fourth Year



Intellectual Property 3 Science of Law 2 Money and Credit 3 Political Science 1,5

Foreign Language of Professional Direction 2 Finance and Enterprise's Finance 3,5 Basics of Management 4 Economy and Labour Law 2,5

Technical and Economical Analysis of Business Activity in Publishing and Printing Houses 1 Labour Protection 1,5

Technical and Economical Analysis of Business Activity in Publishing Book Trading Organizations 1


Human Resources Management 2 Basics of Management 4

Planning of Activity for Publishing and Printing Organizations and Management of Expenditures 2,5


Planning of Activity for Publishing Book Trading Organizations and Management of Expenditures 2,5


Economics and Organization of Publishing Trade 3,25

Economics and Organization of Publishing Trade 3,25

Elective Courses

Management Concepts for Modern Natural Resources 3

Organization and Analysis of Scientific Researches' Results 1,25

Records Management 1,5

Organization and Analysis of Scientific Researches' Results 1,25

Total 30 Total 26,5


___________________________________________________________________________ 170 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Management of Enterprises

Fifth Year



Business Foreign Language 2 Pregraduation Practical Training 6

Management of Publishing and Printing Enterprises 5,5 Graduation Thesis Projecting 22,5

Management of Printed Production Distribution 5,5

Marketing of Printed Production of Publishing and Printing Services 4

Marketing of Printed Production Distribution 4 Finance Management 3

Information Systems and its Application in Business of Publishing and Printing Enterprises 3 Investment Management 3 Strategic Management 3,5

Elective Courses Organization of Manager's Work 2 Theory of Risk 3



___________________________________________________________________________ www.kpi.ua 171

Degree Structure for Master of Management of Enterprises

Fifth Year



Pedagogics of Higher School 1,5 Pregraduation Practical Training 3

Philosophic Problems of Scientific Knowledge 1,5 Internship in Chosen Occupation 6

Science of Patent and Copyright 2 Preparation of Master's Qualification Project 19,5

Business Foreign Language 2

Basics of Society's Sustainable Development 2 Basics of Scientific Researches 2

Management of Publishing and Printing Enterprises 4 Management of Publishing Shops 4 Marketing Management 2,5

Finance and Investment Management 3 Strategic Management 3

Information Systems and its Application in Business of Publishing and Printing Houses 3 Risk Management 2



___________________________________________________________________________ 172 GENERAL CATALOG 2009-2010

Speciality: Printing Machines and Automated Complexes


First Year


Science of Culture 1 Philosophy-2 (Ethics, Aesthetics) 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytical Geometry and Differential Calculus 7

Higher Mathematics-2. Integral Calculus and Differential Equations 7

Chemistry 5 Physics-1. Mechanics and Molecular Physics 6


Engineering and Computer Graphics-2. Engineering Graphics 2

Informatics-1. Typical Algorithms 5 Informatics-2. Algorithmic Languages 1

Technology of Constructional Materials 4

Theoretical Mechanics-1. Statics and Kinematics 5

Material Science 3 Elective Courses

History of Equipments and Technologies-2. Development of Printing Equipments and Technologies 1,5

Basics of Scientific Work 1,5 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 173

Second Year


Foreign Language 2 Philosophy 2,5 Ecology 2 Foreign Language 2

Higher Mathematics 6,5 Theoretical Mechanics-3. Dynamics 3

Physics-2. Electromagnetism and Quantum Physics 6 Strength of Materials 4 Engineering and Computer Graphics 1


Theoretical Mechanics-2. Kinematics, Dynamics 4

Hydraulics, Hydraulic- and Pneumatic Units 3

Strength of Materials 4

Technological Basics of Mechanical Engineering (in Printing) 1,89

Theoretical Basics of Heat-Power Engineering 3

Technology of Publishing and Printing-2. Printing Processes 3

Technological Basics of Mechanical Engineering (in Printing) 1,61

Elective Courses

Methods of Printing Presses Examinations 6



___________________________________________________________________________ 174 GENERAL CATALOG 2009-2010

Third Year



Sociology 1,5 Foreign Language of Professional Direction 2

Foreign Language of Professional Direction 2 Electrical Engineering, Electronics 3

Electrical Engineering, Electronics 3 Economics and Organization of Production 4

Theory of Mechanisms and Machines 1 Machine Component Parts 2,25 Hydraulics, Hydraulic- and Pneumatic Units 2 Life Safety and Labour Protection 3,5 Interchangeability, Standardization and Technological Measurements 4 Practical Training 4,5 Machine Component Parts 2,75 Printing Equipments 4

Platemaking Equipment 5 Designing Basics of Printing Equipments 3,5

Reproducing Equipment 3 Printing Production Technology 3 Technology of Publishing and Printing-2. Printing Processes 4

Equipments of Specific Printing Types 3

Elective Courses

Measurement Tools of Printing Production 2


Fourth Year


Foreign Language of Professional Direction 1,83 Science of Law 2 Technological Basics of Mechanical Engineering (in Printing) 2,5 Political Science 1,5 Economics and Organization of Production 3


Printing Equipments 3,5 Life Safety and Labour Protection 1,5 Designing Basics of Printing Equipments 2,89

Handling and Maintenance of Machines 2

Technology of Printing Production 4 Marketing 2 Preparation of Diploma Project 1,5 Postpress Equipments 3,5

Designing Basics of Printing Equipments 1,61

Reproducing Equipment 2 CAD 1 Preparation of Diploma Project 0

Elective Courses Measurement Tools and Data Treatment 6,22

Measurement Tools and Data Treatment 4,78



___________________________________________________________________________ www.kpi.ua 175

Degree Structure for Specialist of Printing Machines and Automated Complexes

Fifth Year



Foreign Language 1 Foreign Language 1 Intellectual Property 1 Labour Protection in Branch 1

Construction and Calculations of Platemaking Equipments 3

Construction and Calculations of Postpress Equipments 3

Construction and Calculations of Printing Equipments 3

Mechanics of Printing Automated Equipments 2,81

Mechanics of Printing Automated Equipments 2,19 CAD 2,56

Equipments of Specific Printing Types 2

Automation of Technological Processes 3,11

CAD 2,44 Optimization of Mechanisms and Machines Characteristics 4


Maintenance and Mounting of Printing Equipments 2,83

Maintenance and Mounting of Printing Equipments 3,17

Main Trends of Printing Equipments Development 1,22

Basics of Management 1,5


Elective Courses

Industrial Diagnostics of Printing Equipments 3,06



Sixth Year




Total 33 Total


___________________________________________________________________________ 176 GENERAL CATALOG 2009-2010

Degree Structure for Master of Printing Machines and Automated Complexes

Fifth Year



Pedagogics of Higher School 1,5 Foreign Language 1

Philosophic Problems of Scientific Knowledge 1,5 Basics of Scientific Researches 2

Foreign Language 1 Mathematical Methods of Optimization 3

Intellectual Property 1 Labour Protection in Branch 1

Science of Patent and Copyright 2 Construction and Calculations of Postpress Equipments 3

Construction and Calculations of Platemaking Equipments 3

Mechanics of Printing Automated Machines 3,11

Construction and Calculations of Printing Equipments 3 CAD 2,58 Mechanics of Printing Automated Equipments 2,39


Equipments of Specific Printing Types 2,5

Optimization of Mechanisms and Machines Characteristics 5

CAD 2,92 Maintenance and Mounting of Printing Equipments 2,81



Maintenance and Mounting of Printing Equipments 3,19 Fundamentals of Management 1,5


Elective Courses Industrial Diagnostics of Printing Equipments 3,06



Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 177

Speciality: Prints Technology

Degree Structure for Bachelor of Publishing and Printing Business


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Science of Culture 1 History of Ukraine 1,5

Ukrainian Language 1

Philosophy (Ethics, Aesthetics, Science of Religion, Logics) 1

Higher Mathematics 5 Higher Mathematics 5

General Physics. Mechanics. Heat 5 General Physics. Electromagnetism 4

Engineering and Computer Graphics 3 Engineering and Computer Graphics 4

Physical Chemistry, Physical and Chemical Basics of Printing Production 7

Theoretical and Applied Mechanics 6

Basics of Printing and Introduction to Speciality 3

Basics of Programming and Algorithmic Languages 4

Basics of Advertising Business 3 Basics of Printing and Introduction to Speciality 4

Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 2,5 Higher Mathematics 5 Foreign Language 2 Basics of Electrical Engineering, Electronics and Microprocessor Technology 5


Ecology 2 Prepress Information Processing 6

Prepress Information Processing 3 Databases Organization 5 General and Printing Material Science 6 Metrology and Standardization 3 Basics of Lighting Technology 4

Elective Courses

Designing and Typography of Prints 3

Technical Means of Information Processing 4

Special Material Science 3 Total 30 Total 31,5


___________________________________________________________________________ 178 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Technology of Printing Production 5 Color Theory and Color Rendering 5 Life safety and Labour Protection 3,5 Technology of Printing Production 6 Basics of Entrepreneurship 3 Prepress Information Processing: Technology 3 Practical Training 4,5 Special Chapters of Printing Technology: Technology of Drying 4

Printing Equipments: Platemaking Equipments 3

Security Technology of Prints 4

Special Chapters of Printing Technology: Digital Technologies of Printing 3,5

Information Technologies and Computer Networks 3 Technology of Electronic Editions 6

Economics and Organization of Printing Production 4

Total 30 Total 36,5


___________________________________________________________________________ www.kpi.ua 179

Fourth Year


Foreign Language of Professional Direction 1,83 Science of Law 2 Economics and Organization of Printing Production 2,5 Political Science 1,5 Printing and Automated Equipments, Flow Lines 3


Theoretical Fundamentals of Photo- and Copying Processes 3 Marketing 1,5 Designing, Producing of Editions and Packages 3,5

Printing and Automated Equipments, Flow Lines 3

Designing of Technological Processes 2,31

Basics of Technical Creativity and Organization of Scientific Researches 2


Computerization of Technological Processes 2


Preparation of Attestation Project 1,5 Labour Protection 1,5

Elective Courses Technological Processes of Mechanical Operation of Printing Equipments Component Parts 2,5 Security Technology of Editions 2 Laser Technologies and Equipment of Platemaking Productions 3 Technology of Dying 2,5 Designing and Typography of Prints 2



___________________________________________________________________________ 180 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Prints Technology

Fifth Year




Intellectual Property 1 Decorative and Graphic Arts Production of Packaging 2,72

Decorative and Graphic Arts Production of Packaging 4,28

Automated and Computer Engineering, Production Processes 2,72

Automated and Computer Engineering, Production Processes 2,28 Special Types of Printing 2,17 Runnability Control 3 Ergonomics in Printing 3

Special Types of Printing 2,83 Management of Publishing and Printing Productions 3,56

Management of Publishing and Printing Productions 3,44

Projecting and Calculations of Production Processes 5,22

Projecting and Calculations of Production Processes 4,28 Labour Protection in the Branch 1 Management 1,5

Elective Courses CAD Methods and Means 3,11 CAD Methods and Means 4,39


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 181

Degree Structure for Master of Prints Technology

Fifth Year



Pedagogics of Higher School 1,5 Foreign Language 1

Philosophic Problems of Scientific Knowledge 1,5 Basics of Scientific Researches 2

Foreign Language 1 Mathematical Methods of Optimization 3

Intellectual Property 1 Decorative and Graphic Arts Production of Packaging 2,94

Science of Patent and Copyright 2 Automated and Computer Engineering, Production 2,72

Decorative and Graphic Arts Production of Packaging 4,56 Special Types of Printing 2,39



Special Types of Printing 3,11 Projecting and Calculations of Production Processes 5,28


Ergonomics in Printing Productions 3

Runability Control 3 Labour Protection in Branch 1

Projecting and Calculations of Production Processes 4,22 Management 1,5

Elective Courses CAD Methods and Means 3,11 CAD Methods and Means 4,39


Sixth Year



Foreign Language 2


Mathematical Modelling of Systems and Processes 3 Scientific Researches 9,5 Preparation of Graduation Thesis 25,5

Total 42 Total


___________________________________________________________________________ 182 GENERAL CATALOG 2009-2010

Speciality: Packaging Development, Production and Design Technology


First Year



Ukrainian Language 1 Philosophy (Ethics, Aesthetics, Science of Religion, Logics) 1

Science of Culture 1 History of Ukraine 1,5 Higher Mathematics 5 Higher Mathematics 5

General Physics. Mechanics. Heat 5 General Physics. Electromagnetism. 4



Physical Chemistry, Physical and Chemical Basics of Printing Production 7




Basics of Advertising Business 3 Basics of Printing and Introduction to Speciality 4

Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 2,5 Ecology 2 Foreign Language 2 Higher Mathematics 5 Prepress Information Processing 5,61 Basics of Electrical Engineering, Electronics and Microprocessor Technology 5


General and Printing Material Science 6 Databases Organization 5 Metrology, Standardization and Quality Management 3 Prepress Information Processing 3,39 Basics of Lighting Technology 4

Elective Courses

Technical Means of Information Processing 4

Design and Script Graphic Treatment 3

Special Material Science 3 Total 30,39 Total 31,11


___________________________________________________________________________ www.kpi.ua 183

Third Year



Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Practical Training 4,5

Color Theory and Color Rendering 5

Technology of Publishing and Printing Productions. Printing Processes 5

Technology of Publishing and Printing Productions. Platemaking Processes 6 Life Safety and Labour Protection 3,5

Prepress Information Processing: Technology 3 Basics of Entrepreneurship 3

Special Chapters of Printing Technology: Technology of Drying 4

Economics and Organization of Printing Productions 4

Security Printing Technology of Packages 4

Printing Equipments: Platemaking Equipment 3

Information Technologies and Computer Networks 3

Special Chapters of Printing Technologies: Digital Printing Technologies 3,5

Technology of Electronic Editions 6

Total 30 Total 36,5


___________________________________________________________________________ 184 GENERAL CATALOG 2009-2010

Fourth Year



Foreign Language of Professional Direction 1,75 Science of Law 2

Printing and Automated Presses, Flow Lines 3 Political Science 1,5

Theoretical Basics of Photo- and Copying Processes 3


Designing, Producing of Editions and Packages 3,5

Printing and Automated Presses, Flow Lines 3



Economics and Organization of Printing Production 2,5 Marketing 1,5

Basics of Technical Creativity and Organization of Scientific Researches 2


Computerization of Technological Processes 2

Preparation of Attestation Project 1,5 Labour Protection 1,5

Elective Courses

Technological Processes of Mechanical Operation of Printing Presses Component Parts 2,5 Security Technology of Prints 2

Design and Script Graphic Treatment 2

Laser Technologies and Equipment of Platemaking Productions 3 Technology of Dying 2,5



___________________________________________________________________________ www.kpi.ua 185

Degree Structure for Specialist of Packaging Development, Production and

Design Technology

Fifth Year




Intellectual Property 1 Design and Script Graphic Treatment 2,67

Design and Script Graphic Treatment 4,33


Automated and Computer Engineering, Production Processes 2,33 Special Printing Types 2,19

Production Technology of Paper and Cardboard 3

Ergonomics in Printing Productions 3

Special Printing Types 2,81

Production Organization in Manufacturing and Designing of Packing Material and Packages 3,69

Production Organization in Manufacturing and Designing of Packing Material and Packages 3,31

Designing and Calculations of Production Processes 5,22

Designing and Calculations of Production Processes 4,28 Labour Protection in Branch 1 Management 1,5

Elective Courses

Equipments for Packing Material and Packages Production 3,5

Equipments for Packing Material and Packages Production 4



___________________________________________________________________________ 186 GENERAL CATALOG 2009-2010

Speciality: Technology of Electronic and Multimedia Editions


First Year



Science of Culture 1 Philosophy 2 1 Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Foreign Language 2

Higher Mathematics 1. Elements of Linear and Vectorial Algebra, Elements of Analytical Geometry; 6

Higher Mathematics 2. Integral Calculus of Single-Variable Function; Differential and Integral Equations 5

Physics 1. Mechanics and Molecular Physics 4

Physics 2. Optics, Atom and Nuclear Physics, Elementary Particles 3

Theoretical and Applied Mechanics 3 Basics of Electrical Engineering and Industrial Electronics 3

Engineering and Computer Graphics 4 System Programming and OS 4

Basics of Informatics 5 Basics of System Analysis Objects and Processes 4

Introduction to Speciality, History of Printing Development 4

Physical and Chemical Basics of Publishing and Printing Production Technology 4

Technologies of Publishing and Printing Productions 1. Technology of Prepress and Press Processes 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 187

Second Year




Physics 3. Optics, Atom and Nuclear Physics, Elementary Particles 4 Foreign Language 2

Computer and Microprocessor Systems 3 Computer Circuit Engineering 4 Ecology 2 Basics of Reliability Theory 3

Basics of Color Theory and Color Reproduction 3

Circuit Engineering of Junctions and Mechanisms: Circuit Engineering of Junctions and Blocks with Optoelectronic Elements 5

Technological Materials of Publishing and Printing Productions 4

Automation of Designing, Manufacturing and Equipment for Editions, Packages 5

Computerized Technologies of Publishing and Printing Productions 4 Reprography 4 Databases Management 5

Technologies of Publishing and Printing Productions 2. Postpress Processes and Special Types of Printing 3

Elective Courses

Technologies of Computer Video Animation 3

Technologies and Design Technique of Electronic and Multimedia Editions 3

Total 30 Total 31,5

Elective Courses:

Art Direction of Multimedia Editions 3

Multimedia Technologies of Rare Editions Regeneration 3

Total Total 6


___________________________________________________________________________ 188 GENERAL CATALOG 2009-2010

Third Year



Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Computer Networks 3

Circuit Engineering of Junctions and Mechanisms 2. Circuit Engineering of Graphical Units for Entry and Inference and Computers 1 Science of Patent and Copyright 3

Computerized Reprosystems, ASPTP1. Reprosystems 4 Life Safety and Labour Protection 3,5

Basics of Artificial Intelligence Systems' Designing 5 Practical Training 4,5

Technologies of Information Treatment 1. Treatment of Text Information 5

Computerized Reprosystems, ASPTP2. ASPTP1 4

Computerized Technologies and Systems of Electronic and Multimedia Editions Making 1 5

Technologies of Information Treatment 2. Treatment of Graphical Information 4


Basics of Metrology, Standardization and Quality Management 5

Elective Courses

Technologies of Web-Editions Making (pages of documents) 5

Total 30 Total 36

Elective Courses:

Technical Means of Audio and Video Information Treatment and Copying 5

Total 5 Total


___________________________________________________________________________ www.kpi.ua 189

Fourth Year



Foreign Language 1,72 Science of Law 2

Basics of Artificial Intelligence Systems' Designing 1,56 Political Science 1,5

Economics and Organization of Production 2 Foreign Language 1,78 Management and Marketing 1,5 Science of Patent and Copyright 1,5

Computerized Reprosystems and ASPTP1 3

Basics of Artificial Intelligence Systems' Designing 1,44

Treatment of Text Information 2 Computer Networks 3

Treatment of Graphic Information 2

Automation of Designing, Manufacturing and Equipment for Editions and Packages 2,28

Automation of Designing, Manufacturing and Equipment for Editions and Packages 2,72

Protection Technologies of Printed Editions 5

Practical Training 6 System Technique of Computerized Printed Systems 3,5

Theoretical Basics of Electronic and Multimedia Editions Making 9 Life Safety and Labour Protection 1,5



___________________________________________________________________________ 190 GENERAL CATALOG 2009-2010

Speciality: Computer Technologies and Systems of Publishing and Printing Production Systems


First Year



Higher Mathematics 1. Elements of Linear and Vectorial Algebra, Elements of Analytical Geometry 6

Higher Mathematics 2. Integral Calculus of Single-Variable Function; Differential and Integral Calculus 5




Basics of Electrical Engineering and Industrial Electronics 3


System Programming and Operation Systems 4





Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 191

Second Year




Physics 3. Optics, Atom and Nuclear Physics, Elementary Particles 4 Foreign Language 2



Circuit Engineering of Junctions and Mechanisms: Circuit Engineering of Junctions and Blocks with Optoelectronic Elements 5

Technological Materials of Publishing and Printing Productions 4

Automation of Designing, Manufacturing and Equipment for Editions and Packages 5

Computerized Technologies of Publishing and Printing Productions 4 Reprography 4 Databases Management 5

Technologies of Publishing and Printing Productions 2. Postpress Processes and Special Types of Printing 3

Elective Courses

Computer Networks and Modern Network Technologies of Reprocentres 3

Specialized ASPTP of Publishing and Printing Productions 3

Total 30 Total 31,5

Elective Courses:

Computer Design in Printing 3

Holographic Technologies in Printing 3

Total Total 6


___________________________________________________________________________ 192 GENERAL CATALOG 2009-2010

Third Year




Circuit Engineering of Junctions and Devices 2. Circuit Engineering of Graphical Units for Entry and Inference 1 Science of Patent and Copyright 3

Computerized Reprosystems, ASPTP1. Reprosystems 5 Life Safety and Labour Protection 3,5

Basics of Artificial Intelligence Systems' Designing 5 Practical Training 4,5


Computerized Reprosystems, ASPTP2. ASPTP1 5





Elective Courses

Computer-Aided Design at Web-Server 5

Total 30 Total 36

Elective Courses:

Technical Means of Audio and Video Information Treatment and Copying 5

Total 5 Total


___________________________________________________________________________ www.kpi.ua 193

Fourth Year







Management and Marketing 1,5 Science of Patent and Copyright 1,5

Computerized Reprosystems and ASPTP1 1,78


Circuit Engineering of Junctions and Units, ASPTP1 1,44 Computer Networks 3

Treatment of Text Information 2 Computerized Reprosystems and ASPTP1 1,72

Treatment of Graphic Information 2 Circuit Engineering of Junctions and Units, ASPTP1 1,56

Automation of Designing, Manufacturing and Equipment for Editions and Packages 2


Practical Training 6 System Technique of Computerized Printed Systems 3

Computer Design of Electronic and Multimedia Editions 4,44 Life Safety and Labour Protection 1,5

Computer Design of Electronic and Multimedia Editions 4,56

Elective Courses

Computer Design of Printed Electronic and Multimedia Editions 2



___________________________________________________________________________ 194 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Computer Technologies and Systems of Publishing and Printing Production Systems

Fifth Year



Intellectual Property 1 Foreign Language 1

Foreign Language 1 Information Security in Computerized Systems 2

Management 1,5 Computerized Reprosystems and ASPTPІ 2

Reprography and Special Types of Printing 3

Systems Technique of Computerized Edition Systems 2,44

Computerized Technologies and Systems for the Electronic Editions Production 2,5

Automation of Projecting for Printed and Electronic Editions 2,22

Computerized Reprosystems and ASPTPІ 2 Treatment of Text Information 2,22

Circuit Engineering of Junctions and Mechanisms and ASPTPІ 1,5 Treatment of Graphic Information 2,17

Systems Technique of Computerized Edition Systems 2,56

Material Science (Constructions and Technological Materials for Automatic Systems for Projecting of Technological Processes) 3

Automation of Projecting for Printed and Electronic Editions 2,28

Digital Treatment of Audio and Video Information 3

Treatment of Text Information 2,28 Projecting of Computerized Publishing Systems Nets 1,5

Treatment of Graphic Information 2,33 Life Safety and Labour Protection 1 Elective Courses

Technology of Multimedia Editions 4

Technology of Multimedia Editions 3,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 195

Degree Structure for Master of Computer Technologies and Systems of Publishing and Printing Production Systems

Fifth Year


Intellectual Property 1 Foreign Language 1 Foreign Language 1 Basics of Scientific Researches 2

Pedagogics of Higher School 1,5 Mathematical Methods of Optimization 3


Information Security in Computerized Systems 2

Management 1,5 Computerized Reprosystems and ASPTPІ 2,22

Science of Patent and Copyright 2 Systems Technique of Computerized Edition Systems 2,97

Basics of Sustainable Development 2 Automation of Designing for Printed and Electronic Editions 2,22

Reprography and Special Types of Printing 3 Treatment of Text Information 2,44 Computerized Technologies and Systems for Electronic Editions Production 2 Treatment of Graphic Information 2,06

Computerized Reprosystems, ASPTPІ 2,28

Material Science (Constructions and Technological Materials for Automatic Systems for Projecting of Technological Processes) 3

Circuit Engineering of Junctions and Mechanisms, ASPTPІ 1,5

Digital Treatment of Audio and Video Information 3

Circuit Engineering of Computerized Printing Systems 3,03

Projecting of Computerized Publishing Systems Networks 1,5

Treatment of Text Information 2,06 Life Safety and Labour Protection 1 Automation of Designing for Printed and Electronic Editions 2,28

Scientific Researches on Chosen Subject 5,5

Treatment of Graphic Information 2,44 Preparation of Master's Project 8,67 Elective Courses




Sixth Year


Mathematical Modelling of Systems and Processes 3 Preparation of Master's Thesis 8,67 Scientific Researches on Chosen Subject 5,5 Scientific Trainings in Master's Thesis 2 Preparation of Master's Thesis 8,67



___________________________________________________________________________ 196 GENERAL CATALOG 2009-2010

Speciality: Materials for Publishing and Printing Productions


First Year




Higher Mathematics 1. Elements of Linear and Vectorial Algebra, Elements of Analytical Geometry 6

Higher Mathematics 2. Integral Calculus of Single-Variable Function; Differential and Integral Calculus 5




Basics of Electrical Engineering and Industrial Electronics 3


System Programming and Operation Systems 4





Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 197

Second Year


Foreign Language 2 Philosophy 1 2,5 Physics 3. Optics, Atom and Nuclear Physics, Elementary Particles 4 Foreign Language 2



Technological Materials of Publishing and Printing Productions 2. Unbalanced Physical, Chemical and Technological Properties of Materials 5

Technological Materials of Publishing and Printing Productions 1. Balanced Physical, Chemical and Technological Properties of Materials 4

Information Base and Systems of Quality Management for Printing Productions 5

Computerized Technologies of Publishing and Printing Productions 4

Technologies of Synthesis, Production and Preparation of Materials for Publishing and Printing Productions 4

Information Base of Printing Material Science 5 Technologies of Publishing and Printing Productions 2. Postpress Processes and Special Types of Printing 3

Elective Courses

Programming Products for Makeup of Complex Scientific and Technical Publications 3

Systems of Control and Management of Materials Properties 3

Total 30 Total 31,5

Elective Courses:

Computer Technologies of Colors Production and Mixing 3

Automated Systems and Methods for Materials Properties Measurement and Control 3

Total Total 6


___________________________________________________________________________ 198 GENERAL CATALOG 2009-2010

Third Year




Technological Materials of Publishing and Printing Productions 3 1 Science of Patent and Copyright 3

Computerized Reprosystems, ASPTP1 5 Life Safety and Labour Protection 3,5

Technologies Management of Publishing and Printing 1 5 Practical Training 4,5


Management of Technologies for Publishing and Printing Productions 2 5





Elective Courses

Automated Systems and Technologies of Materials Rheological Properties Measurement 5

Total 30 Total 36

Elective Courses:

Enterprise's Logistics in Branch 5

Total 5 Total


___________________________________________________________________________ www.kpi.ua 199

Fourth Year







Management and Marketing 1,5 Science of Patent and Copyright 1,5

Computerized Reprosystems and ASPTPІ 1,56


Circuit Engineering of Junctions and Units, ASPTPI 1,5 Computer Networks 3

Treatment of Text Information 2 Computerized Reprosystems and ASPTPІ 1,44

Treatment of Graphic Information 2 Circuit Engineering of Junctions and Units, ASPTPI 1,5

Automation of Designing, Manufacturing and Equipment for Editions, Packages 5


Practical Training 6 System Technique of Computerized Printed Systems 3

Life Safety and Labour Protection 1,5

Basics of Synthesis and Production Technologies of Materials for Publishing and Printing Productions 9


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF PHYSICAL ENGINEERING

___________________________________________________________________________ www.kpi.ua 201

Faculty of Physical Engineering

Since its foundation in 1898 Kiev Polytechnic Institute has been carrying out training of Bachelors in metallurgical engineering at first at Chemical Faculty and since 1994 at specially established Faculty of Metallurgy that was renamed into Faculty of Physical Engineering in 1975.

Around 90 teachers are working at the Faculty among them are 34 professors and 40 doctors. Over 7000 graduates were trained at this faculty: 7 of them are academicians, 14 corresponding members of National Academy of Sciences of Ukraine, more than 140 doctors and 600 PhDs.

The prominent graduates of the Faculty are the heads of many academic institutes.

http://iff.kpi.ua


___________________________________________________________________________ 202 GENERAL CATALOG 2009-2010

Speciality: Physical Material Science

Degree Structure for Bachelor of Engineering Material Science

First Year



Foreign Language-1 2 Foreign Language-1 2 Philosophy-2. Ethics and Aesthetics, Science of Religion, Logic 1 Ukrainian Language 1 History 1,5 Science of Culture 1 Higher Mathematics-1 8,5 Higher Mathematics-2 7

Computer Science, Computer Engineering, Programming and Numerical Methods 2

Physics-1. Mechanics, Thermal Effects, Magnetism 8



Chemistry-1.General Chemistry 6

Computer Science, Computer Engineering, Programming and Numerical Methods 2,5

Introduction to Specialty 2 Chemistry-2. Chemistry of Elements 5

Descriptive Geometry and Computer Graphics 3


Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 203

Second Year



Foreign Language 2 2 Foreign Language-2 2

Philosophic Problems of Scientific Knowledge 2,5 Ecology 2

Higher Mathematics-3 4,5

Theoretical and Applied Mechanics 2. Strength of Materials and Machines Details 2

Physics-2. Optics, Nuclear and Molecular Physics 5,5

Technology of Metal Production and Treatment 4

Physical Chemistry 4,5

Research Methods of Material Properties-1. Structural Analysis Methods of Materials 3

Theoretical and Applied Mechanics-1. Theoretical Mechanics 2

Physical Properties and Researches Methods of Materials 5

Crystallography, Crystal Chemistry and Mineralogy 1 Metal Science 5

Crystallography, Crystal Chemistry and Mineralogy 2 Metals Physics 1

Electric Engineering and Electronics 3

Basics of Experimental Researches Equipment 1,5

Basics of Experimental Researches Equipment 1,5

Technology of Metals Surface Heating and Treatment 3,5

Elective Courses Computer Application 1,5 Theoretical Physics 2,5

Total 30 Total 31,5

Elective Courses:

Computer Application 1,5 Solid State Physics 2,5

Total 1,5 Total 2,5


___________________________________________________________________________ 204 GENERAL CATALOG 2009-2010

Third Year



Foreign Language -1 2 Foreign Language-1 2 Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5

Research Methods of Material Properties and Goods-2. Diagnostics and Defectoscopy of Materials and Goods 3

Mechanical Properties and Structural Strength of Materials 5

Basics of Powder Metallurgy and Composite Materials 4 Industrial Practical Training 4,5 Physics of Materials Fused State 4 X-Ray Analysis of Materials 4

Metals Physics-2. Defects of Crystal Building 4

Standardization, Metrology and Products Quality Control 3

Mathematical Modelling and Optimization of Technological Processes and Materials 4

Material Science of Non-Ferrous Metals and Alloys 5

Thermal Treatment of Metals and Alloys 4

Elective Courses

Computer Application-2. Computer Information Processing-a 1,5 Additional Chapters of Physics-a 1,5

Special Physical Research Methods of Materials-a 2,5

Powder, Composite and Nonmetallic Materials 4

Total 30,5 Total 36

Elective Courses:

Computer Application-2. Computer Information Processing-b 1,5 Additional Chapters of Physics-b 1,5

Special Physical Research Methods of Materials-b 2,5 Functional and Polymer Materials 4

Total 4 Total 5,5


___________________________________________________________________________ www.kpi.ua 205

Fourth Year



Science of Law 2 Metals Physics 4 year of studying 3


Life Safety and Labour Protection 1,5 Economics and Organization of Production 3

Metals Physics 4 year of studying 3


Basics of Scientific and Technical Work and Experiment Theory 2

Mathematical Modelling and Optimization of Technological Processes 2,5

Research Methods of Material Properties-1 Structural Analysis Methods of Materials 6 Electron Theory of Solid State 3

Physical Methods of Metals and Fusions Researches 5,5

Elective Courses Internet Technologies and Computer Networks in Research Activity 2

Special Chapters of X-ray Structural Analysis 6

Electron Microscopy 4,5

Information Technologies of Physical and Technical Tasks Solving 2

Computer Modelling of Crystal Grates 2

Special Training "Internet-Publication of Research Results" 2



___________________________________________________________________________ 206 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Physical Material Science


Course Title Credit Course Title Credit Management 1,5 Basics of Marketing 1,5 Foreign Language 2 Life Safety and Labour Protection 1,5 Metals Physics 3 Intellectual Property 1 Scientific Seminars, Scientific Research Work of Students 6

Basics of Steel Alloying and Special Alloys 3

Computing Physics 3 Physical Basics of Hardness, Plasticity and Destruction 4

Special Chapters of Electronic Microscopy 4

Scientific Seminars, Scientific Research Work of Students 6

Disordered Systems 2 Physics of Metallic Coverings and Tapes 2,5

Thermodynamics and Diffusion Kinetics in Metals 3

Spectroscopy of Solid Body 2,5 Elective Courses

Organizational Methods of Computer Experiment in Material Science 4 Basics of Relational Databases for Experimental Researches and Manufacturing Technologies 3,5

Total 29 Total 25 Specialization:

Computer Modelling of Heat and Mass Transmit Processes 4

Physics of Ultrathin Interactions in Solid Bodies, Research Methods and Modelling 3

Calculation Methods of Interatomic Interaction and Computer Modelling of Atoms Distribution in Solid Solutions 2

Computer Classifications in Material Science 2,5

Total 6 Total 5,5 Specialization: Special Chapters of Electrical Diffraction 4 Diffusion Theory in Solid State 3 Structure and Properties of Bodies in Liquid 2 Methods of Spectral Analysis 2,5

Total 6 Total 5,5


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Graduation Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 207

Degree Structure for Master of Physical Material Science


Course Title Credit Course Title Credit Management 1,5 Basics of Marketing 1,5 Foreign Language 2 Pedagogics of Higher School 1,5 Special Chapters of Electronic Microscopy 4


Scientific Seminars, Scientific Research Work of Students 6 Basics of Scientific Researches 2 Metals Physics 3 Intellectual Property 1 Computing Physics 3 Life Safety and Labour Protection 1,5

Disordered Systems 2 Basics of Steel Alloying and Special Alloys 3

Physical Basics of Hardness, Plasticity and Destruction 4

Scientific Seminars, Scientific Research Work of Students 6

Spectroscopy of Solid Body 2,5

Thermodynamics and Diffusion Kinetics in Metals 3

Physics of Metallic Coverings and Tapes 2,5

Elective Courses Basics of Relational Databases for Experimental Researches and Manufacturing Technologies 3,5 Organizational Methods of Computer Experiment in Material Science 4

Total 29 Total 31,5



Scientific Research and Preparation of Master's Graduation Thesis 25,5

Science of Patent and Copyright 2 Foreign Language 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Deformation Basics in Micro and Nanoidentification 1,5 Scientific Research on Chosen Subject 7,5 State Diagrams of Non-ferrous Metals 3,5

Total 23 Total 25,5


___________________________________________________________________________ 208 GENERAL CATALOG 2009-2010

Speciality: Composite and Powder Materials, Coatings


First Year




Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Ukrainian Language 1

History of Ukraine 1,5 Science of Culture 1

Higher Mathematics 8,5 Higher Mathematics 7

Chemistry 6 Physics 8

Computer Science, Computer Engineering, Programming and Numerical Methods 2 Chemistry 5





Introduction to Specialty 2 Descriptive Geometry and Computer Graphics 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 209

Second Year




Philosophy 2,5 Ecology 2

Higher Mathematics 4,5 Theoretical and Applied Mechanics 2

Physics 5,5 Physical Properties and Researches Methods of Materials 5

Physical Chemistry 4,5 Metal Science 5


Research Methods of Material Properties 1. Structural Analysis Methods 3


Technology of Materials Production and Treatment 2

Crystallography, Crystal Chemistry and Mineralogy 3


Non-Ferrous Metals and Alloys 3 Physics of Materials Condensed State 4,5

Thermodynamics of Materials 2,5

Elective Courses

PC Programming 1,5

Total 30 Total 31,5

Elective Courses:

PC User 1,5

Total Total 1,5


___________________________________________________________________________ 210 GENERAL CATALOG 2009-2010

Third Year






Research Methods of Material Properties 2. Diagnostics and Defectoscopy 3

Mechanical Properties and Structural Strength of Materials 5

Basics of Powder Metallurgy and Composite Materials 4 Industrial Practical Training 4,5

Non-Metallic Materials 4 Cover Plotting Technology and Properties of Coatings 4

Theory of Heat and Mass Transmit in Materials 3

Nanomaterials and Nanotechnologies 4,5

Material Science of Refractory and Composite Materials-1. Refractory Materials 4,5


Crystal Chemistry of Refractory Compounds 3

Material Science of Refractory and Composite Materials-2. Composite Materials 3

Theory of Powder and Composite Materials Forming and Sintering Technology 5


Elective Courses PC Programming 1,5

Total 30,5 Total 36

Elective Courses:

PC User 1,5

Total 1,5 Total


___________________________________________________________________________ www.kpi.ua 211

Fourth Year



Science of Law 2 Foreign Language of the Professional Direction 1,67

Political Science 1,5 Standardization, Metrology and Products Quality Control 2,5

Labour Protection 1,5 Methods of Structural Analysis of Materials 5


Theory of Processes for Spray-Coated Covers Formation 3


Powder and Composite Materials Production Equipment 3

Material Science of Composite Materials 4

Mechanics and Technology of Powder and Composite Materials 5,5

Theory of Processes for Spray-Coated Covers Formation 2


Theory of Powder and Composite Materials Forming and Sintering Technology 5 Non-Metallic Materials 5

Elective Courses

Thermodynamics of Materials Synthesis Technological Processes 3

Powder and Composite Materials for Medicine 3

Phase Diagrams and New Materials Development 3



___________________________________________________________________________ 212 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Composite and Powder Materials,

Coatings

Fifth Year



Basics of Management 1,5 Basics of Marketing 1,5 Foreign Language 2 Intellectual Property 1 Technologies and Equipments of Powder Cover Plotting 2,03 Business Communication 1,5 Engineering Material Science 3 Labour Protection in the Branch 1,5 Magnetic and Electrotechnical Powder Materials 3

Technologies and Equipments of Powder Cover Plotting 0,97

Materials for Coatings 3 Additional Chapters of Theory and Technology of Powder Metallurgy 3

Design of Powder and Composite Materials Construction 3

Nanomaterials and Nanotechnologies 3

Computer Modelling in Material Science 3

Basics of Scientific Researches and Experiment Organization 9

Materials for Special Purposes 3 Elective Courses

Scientific and Technological Basics of Functional Gradient Materials and Surfaces Forming 3

Computer Use in Engineering Calculations 2,5

Physical Basics of Hardness and Destruction 2


Specialization: Equipment and Tools for Powder Metallurgy 3 Powder Materials of Special Use 3 Powder Wear-Resistent Materials and Solid Alloys 3

Total 6 Total 3

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 213

Degree Structure for Master of Composite and Powder Materials, Coatings


Course Title Credit Course Title Credit Foreign Language 2 Pedagogics of Higher School 1,5 Basics of Management 1,5 Basics of Scientific Researches 2 Design of Powder and Composite Materials Construction 3

Basics of Scientific Researches and Experiment Organization 8,5

Engineering Material Science 3 Mathematical Methods of Optimization 3

Technologies and Equipments of Powder Cover Plotting 2,17 Basics of Marketing 1,5 Magnetic and Electrotechnical Powder Materials 3 Business Communication 1,5 Materials for Coatings 3 Labour Protection in the Branch 1 Computer Modelling in Material Science 3 Intellectual Property 1 Powder Wear-Resistent Materials and Solid Alloys 3

Technologies and Equipments of Powder Cover Plotting 0,83

Scientific Research on Chosen Subject 2,5

Additional Chapters of Theory and Technology of Powder Metallurgy 3

Materials for Special Purposes 3

Nanomaterials and Nanotechnologies 3

Scientific Research on Chosen Subject 2,5

Elective Courses Scientific and Technological Basics of Functional Gradient Materials and Surfaces Forming 4,5

Physical Basics of Hardness and Destruction 3



Course Title Credit Course Title Credit Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Processes and Systems 3 Basics of Society's Sustainable Development 2 Scientific Research on Chosen Subject 2,5 Scientific Basics of Composite Materials Forming 4,5



___________________________________________________________________________ 214 GENERAL CATALOG 2009-2010

Speciality: Material Science


First Year




Philosophy 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics 8,5 Higher Mathematics 7 Chemistry 6 Physics 8 Computer Science, Computer Engineering, Programming and Numerical Methods 6 Chemistry 5



Introduction to Specialty 2 Descriptive Geometry and Computer Graphics 3

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language of the Professional Direction 2


Philosophy 2,5 Ecology 2 Higher Mathematics 4,5 Theoretical and Applied Mechanics 2

Physics 5,5 Physical Properties and Material Research Methods 5

Physical Chemistry 4,5 Metal Science 5


Research Methods of Material Properties 1. Structural Analysis Methods 3

Electric Engineering and Electronics 3


Crystallography, Crystal Chemistry and Mineralogy 3


Metallurgy of Ferrous and Non-Ferrous Metals 3 Metallography 5,5

Elective Courses PC Programming 3

Total 30 Total 31,5 Elective Courses: PC User 3

Total Total 3


___________________________________________________________________________ www.kpi.ua 215

Third Year




Economic Theory 2 Psychology 1,5 Life Safety 3,5 Sociology 1,5

Basics of Powder Metallurgy and Composite Materials 4

Mechanical Properties and Structural Strength of Materials 1,5

Research Methods of Material Properties 2. Diagnostics 3

Mechanical Properties and Structural Strength of Materials 3,5

Non-Metallic Materials 4 Industrial Practical Training 4,5

Metal Science, Additional Chapters 4 Standardization, Metrology and Products Quality Control 3

Theory and Practice of Heat Treatment for Carbon and Alloyed Steels 1. Heat Treatment Theory 5

Theory and Practice of Heat Treatment for Carbon and Alloyed Steels 2. Carbon Steels 3,5

Crystal Lattice Defects 3 Material Science-1. Non-Ferrous Metals and Alloys 4

Mathematical Modelling and Optimization of Technological Processes and Materials 3,5

Technology, Equipment and Design of Thermal Workshops 2,5

Basics of Heat and Mass Transmit Theory 1,5

Elective Courses Fractography 3,5

Total 30,5 Total 36

Elective Courses:

Fractography 3,5

Total Total 3,5


___________________________________________________________________________ 216 GENERAL CATALOG 2009-2010

Fourth Year



Science of Law 2 Standardization, Metrology and Products Quality Control 2

Political Science 1,5 Special Steels and Alloys 5 Labour Protection 1,5 Non-Ferrous Metals and Alloys 3,5



Mathematical Modelling and Optimization of Technological Processes and Materials 3,5


Methods of Structural Analysis of Materials 4

Theory and Practice of Heat Treatment 6


Elective Courses Physical Basics of Wearing 2 Non-Metallic Materials 2,5 Fractography 2


Elective Courses:

Phase Diagrams and New Materials Development 2 Non-Metallic Materials 2,5

Solidification and Structure Formation 2

Total 2 Total 4,5


___________________________________________________________________________ www.kpi.ua 217

Degree Structure for Specialist of Material Science

Fifth Year



Basics of Management 1,5 Basics of Marketing 1,5


Metal Science of Refractory Metals 2,5 Additional Chapters of Heat Treatment 1,5

Modern Methods and Technologies 1 Technology, Equipment and Design of Thermal Workshops 2,5

Technology, Equipment and Design of Thermal Workshops 3

Radial Methods of Metals Treatment 2

Heating Engineering 1,5 Basics of Scientific Researches 7,5

Basics of Scientific Researches 5 Moulding Technology, Structure and Materials Properties 3

Modern Methods and Technologies 2 Physics of Concentrated Energy Sources 3

New Materials and Research Methods 2 Intellectual Property 1

New Materials and Research Methods 3

Elective Courses

Interatomic Interaction and Materials Properties 1,5

Nanotechnologies and Nonstructural Materials 3

Gases Influence on Structural Properties of Metals and Alloys 3

Total 25 Total 29


___________________________________________________________________________ 218 GENERAL CATALOG 2009-2010

Specialization: Management of Innovation Materials and Technologies in Material Science 2,5

Computer Methods of Management Optimization in Material Science 1,5

Certification and Quality Management in Material Science 1,5

Innovation Management in Material Science 1,5

Total 7 Total

Specialization:

Computer Methods of Optimization, Marketing of Technologies and Materials 1,5

Innovative Technologies of Materials Surface Treatment 3

Marketing of Intellectual Property 1,5

Marketing of Innovation Technologies for Metal Goods Production 3

Certification and Quality Management in Material Science 1,5

Total Total 10,5

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 219

Degree Structure for Master of Material Science


Course Title Credit Course Title Credit Basics of Management 1,5 Basics of Marketing 1,5 Foreign Language 2 Pedagogics of Higher School 1,5

Metal Science of Refractory Metals 2,5 Mathematical Methods of Optimization 3

Modern Methods and Technologies 2 Basics of Scientific Researches 2 Modern Methods and Technologies 1 Labour Protection in the Branch 1 Technology, Equipment and Design of Thermal Workshops 3

Additional Chapters of Heat Treatment 1,5

Heating Engineering 1,5 Technology, Equipment and Design of Thermal Workshops 2,5

Basics of Scientific Researches 5,5 Moulding Technology, Structure and Materials Properties 3


Radial Methods of Metals Treatment 2

Basics of Scientific Researches 1


Physics of Concentrated Energy Sources 3

Intellectual Property 1 Elective Courses

Interatomic Interaction and Materials Properties 1,5

Nanotechnologies and Nonstructural Materials 3

Gases Influence on Structural Properties of Metals and Alloys 3

Total 25,5 Total 29



Scientific Research and Preparation of Master's Thesis 25,5

Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Methods for Materials Treatment, Structure and Properties 3 Basics of Society's Sustainable Development 2 Basics of Scientific Researches 6 Scientific Researches by Diploma Project 9,5

Total 27 Total 25,5


___________________________________________________________________________ 220 GENERAL CATALOG 2009-2010

Speciality: Foundry of Ferrous and Non-ferrous Metals

Degree Structure for Bachelor of Foundry

First Year



Philosophy-2. (Ethics, Aesthetics and Logic) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1

Foreign Language-1. Communications in General Education and Technical Fields 2


Chemistry 1. General Chemistry 7 Theoretical and Applied Mechanics 1. Theoretical Mechanics 3

Higher Mathematics 1. Linear Algebra and Differential Equations 8

Computer Science - 2. Numerical Methods 1,5

Descriptive Geometry-1. Image 3,5 Physics-1. Mechanics, Thermal Effects, Electromagnetism 7,5

Introduction to Specialty 1 Higher Mathematics-2. Integral Calculus Differential Equations 5

Computer Science 1. Programming 6 Chemistry-2. Chemistry of Elements. Organic Chemistry 4

Computer Science-3. Laboratory Practical Training 2

Descriptive Geometry-2. Drawing 2

Descriptive Geometry-3. Course Project 1

Hydraulics 1. Basics of Hydraulics 1,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 221

Second Year



Philosophy-1. History of Philosophy 2,5

Foreign Language-2. Communications Implementation on Occupation 2

Foreign Language-2. Communications Implementation on Occupation 2 Ecology 2

Physical Chemistry 5,5

Basics of Melting Theory for Foundry Alloys-2. Theory and Building of Metal and Melted Slags 1,5

Basics of Melting Theory for Foundry Alloys-1. Metallurgy of Foundry Alloys 2,5

Metal Science and Heat Treatment-1. Metal Science 5

Higher Mathematics 3. Theory of Probabilities 5

Theoretical and Applied Mechanics 3. Course Project 1,5

Physics-2. Optics, Molecular and Nuclear Physics 5

Electric Engineering and Electronics 5,5


Metal Science and Heat Treatment-2. Heat Treatment 2

Theory and Technology of Metallurgical Production 6

Physical and Structural Research Methods 3

Elective Courses

Computer Programming 2 Materials Structure, Properties and Treatment-2. Metals Treatment 1,5

Materials Structure, Properties and Treatment-1. Crystallography and Mineralogy 1,5

Materials Structure, Properties and Treatment-3. Corrosion and Metal Protection 1,5

Total 30 Total 31,5

Elective Courses:

Computer User 2 Materials Structure, Properties and Treatment-2. Metals Treatment 1,5

Materials Structure, Properties and Treatment-1. Crystallography and Mineralogy 1,5

Materials Structure, Properties and Treatment-3. Corrosion and Metal Protection 1,5

Total 3,5 Total 3


___________________________________________________________________________ 222 GENERAL CATALOG 2009-2010

Third Year


Foreign Language-3. Foreign Language of the Professional Direction 2

Foreign Language-3. Foreign Language of the Professional Direction 2

Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Foundry Furnaces and Driers 6 Technology of Foundry Molds 3,5 Theoretical Fundamentals of Foundry 6 Hydraulics of Foundry Processes 2,5 Theoretical Fundamentals of Shaping 5

Equipment of Molding Shops-2. Machines Drives 2

Quality Control of Production-1. Statistical Data Processing 1,5

Equipment of Molding Shops-3. Lines and Complexes 3,5

Equipment of Molding Shops-1. Machines and Equipment 4,5

Equipment of Molding Shops-4. Course Project 1

Quality Control of Production-2. Metrology and Certification 1,5

Industrial Practical Training 4,5 Computer-Aided Manufacturing 2,5 Equipment Design and Production 3

Elective Courses

Artistic and Jewelry Casting-1. History of Artistic Casting 1,5

Artistic and Jewelry Casting-2. Fine Art 1,5

Technologies in Foundry-1. Technologies and Equipment of Special Metallurgy in Foundry 2,5

Technologies in Foundry-2. New Materials 1,5

Total 30,5 Total 36 Elective Courses:

Artistic and Jewelry Casting-1. History of Artistic Casting 1,5

Artistic and Jewelry Casting-2. Fine Art 1,5

Production Processes of Casting-1. Prosthetic and Technical Material Science 2,5

Production Processes of Casting-2. New Materials 1,5

Total Total 7


___________________________________________________________________________ www.kpi.ua 223

Fourth Year


Science of Law 2

Theoretical Fundamentals Moulding Production Mechanization and Automatization 0

Political Science 1,5 Basics of Melting Theory and Mouldings Production 2

Labour Protection 1,5 Foreign Language of the Professional Direction 1,5

Modelling and Optimization of Technological Systems 0,5

Standardization, Metrology and Products Quality Control 1,5

Modelling and Optimization of Technological Systems 1 New Materials 1,5 Basics of Scientific and Technical Work 1,5 Corrosion and Metal Protection 1,5

Industrial Economics 3 Production Equipment of Molding Shops 3

Theoretical Fundamentals of Moulding Production Mechanization and Automatization 4

Organization of Production Management 3

Basics of Melting Theory and Mouldings Production 4

Foreign Language of the Professional Direction 2 Technology of Foundry Molds 1,5

Elective Courses Metallurgy of Noble Metals 2 Basics of Model Production 3 Technologies and Equipments of Special Electric Metallurgy in Foundry 2

Total 29,5 Total 14


___________________________________________________________________________ 224 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Foundry of Ferrous and Non-ferrous Metals

Fifth Year


Foreign Language 1 Foreign Language 1 Basics of Management 1,5 Intellectual Property 1 Design of Molding Shops 3,5 Basics of Marketing 1,5 Cast-Iron Foundry 3 Labour Protection in the Branch 1,5 Production Equipment of Molding Shops 2 Computer-Aided Design Systems 3 Basics of Scientific Researches 2,11 Design of Molding Shops 0 Scientific Researches of Foundry Processes 5 Basics of Scientific Researches 2,39 Automated Control Systems of Foundry Technological Processes 2

Scientific Researches of Foundry Processes 2

Steel Foundry 3 Construction of Foundry Details 2,5

Casting of Non-Ferrous Alloys 2,5 Special and Extraordinary Foundry Types 4,5

Computer Technologies in Foundry 7,5 Total 25,61 Total 26,89

Specialization: Foundry Processes of Biocompatible Metals and Alloys 1,44

Foundry Processes of Biocompatible Metals and Alloys 1,06

Production Technology of Dental Prostheses 1,5

Production Technology of Fully Moulded Dental Prostheses 1,5

Technological Basics of Protective and Decorative Cover Plotting 1,5

Total 2,94 Total 4,06 Specialization: Metals, Alloys and Producing Technology of Artistic and Jewelry Castings 3

Metals, Alloys and Producing Technology of Artistic and Jewelry Castings 2,5

Technological Basics of Protective and Decorative Cover Plotting 1,5

Total 3 Total 4

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 225

Degree Structure for Master of Foundry of Ferrous and Non-ferrous

Metals

Fifth Year



Foreign Language 1 Intellectual Property 1 Basics of Management 1,5 Pedagogics of Higher School 1,5

Scientific Researches of Foundry Processes 6,94 Foreign Language 1

Production Equipment of Molding Shops 2 Basics of Marketing 1,5

Automated Control Systems of Foundry Technological Processes 2


Design of Molding Shops 3,5 Basics of Scientific Researches 2 Cast-Iron Foundry 3 Labour Protection in the Branch 1,5 Casting of Non-Ferrous Alloys 2,5 Computer-Aided Design Systems 3

Steel Foundry 3 Scientific Researches of Foundry Processes 5,06

Scientific Research on the Subject 12 Construction of Foundry Details 2,5

Preparation of Master's Thesis 25,5 Special and Extraordinary Foundry Types 4,5

Elective Courses Computer Technologies in Foundry 7,5


Sixth Year



Foreign Language 2



Basics of Society's Sustainable Development 2 Science of Patent and Copyright 2

Total 10,5 Total


___________________________________________________________________________ 226 GENERAL CATALOG 2009-2010

Speciality: Special Metallurgy

Degree Structure for Bachelor of Metallurgy

First Year



Philosophy 2. Ethics, Aesthetics, Logic 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1



Higher Mathematics 1. Linear Algebra, Differential Equations 8

Higher Mathematics 2. Integral Calculus, Differential Equations 5

Chemistry 1. General Chemistry 7 Physics-1. Mechanics, Heat, Electricity and Magnetics 7,5

Computer Science-1. Basics of Computer Science, Computer Engineering, Programming 6

Chemistry-2. Chemistry of Elements 4

Descriptive Geometry 1. Image 3,5 Computer Science-2. Numerical Methods 1,5

Introduction to Occupation 1 Computer Science-2. Numerical Methods 2

Theoretical and Applied Mechanics 1.Theoretical Mechanics 3

Descriptive Geometry-2. Drawing 2

Descriptive Geometry-3. Course Project 1

Hydraulics 1. Basics of Hydraulics 1,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 227

Second Year





Philosophy-1. History of Philosophy 2,5

Theoretical and Applied Mechanics 3. Course Project 1,5

Higher Mathematics 3.Theory of Probabilities 5 Ecology 2

Physics-2. Optics, Molecular and Nuclear Physics 5

Electric Engineering and Electronics 5,5

Physical Chemistry 5,5 Metal Science and Heat Treatment-1. Metal Science 5


Metal Science and Heat Treatment -2. Heat Treatment 2

Materials Structure, Properties and Treatment 1. Crystallography and Mineralogy 2

Materials Structure, Properties and Treatment 2. Metals Treatment 1,5

Theory of Metallurgical Processes 6 Studying Practical Training 3

Physical and Structural Research Methods 3

Elective Courses Computer Programming 4 Computer Programming 2

Theoretical and Applied Mechanics 4. Computer Design of Machines and Mechanisms 1

Total 30 Total 34,5

Elective Courses:

Computer User 4 Computer User 2

Theoretical and Applied Mechanics 4. Computer Design of Machines and Mechanisms 1

Total 4 Total 3


___________________________________________________________________________ 228 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 3. Foreign Language of the Professional Direction 2

Foreign Language 3. Foreign Language of the Professional Direction 2

Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Heating and Heat Power Engineering 1 7

Heating and Heat Power Engineering 2. Course Project 1

Basics of Metallurgy 5,5 Basics of Qualimetrics 5 Basics of Metallurgy 1,5 Industrial Practical Training 4,5

Basics of Solidification 5 Properties of Metal and Melted Slags 5,5

Theoretical Basics of Special Metallurgy 1. Theory 6

Theoretical Basics of Special Metallurgy 2. Thermal Physics 3

Elective Courses Theory and Practice of Foundry Production 4

Cast-Iron, Steel and Non-Ferrous Foundry 6

Total 30,5 Total 36 Elective Courses: Foundry Producing of Cast Iron Casting 4 Foundry Producing of Steel Casting 4,5

Total 4 Total 4,5

Fourth Year


Science of Law 2 Physical Chemistry and Analytical Control 3

Political Science 1,5 Standardization, Metrology and Quality Control 1,5

Labour Protection 1,5 New Materials 2 Modelling and Optimization of Technological Systems 0,5 Corrosion and Metal Protection 1,5 Modelling and Optimization of Technological Systems 1


Basics of Scientific and Technical Work 2

Organization of Production Management 3

Industrial Economics 3 Technologies and Equipments of Special Electric Metallurgy 5,5

Foreign Language of the Professional Direction 1,89 Cast Composite Materials 2 Theoretical Basics of Special Electric Metallurgy 5,5

Elective Courses Theory and Practice of Foundry Production 2,89

Theory and Practice of Foundry Production 4,11

Technologies and Equipments of Special Electric Metallurgy (additional chapter) 3



___________________________________________________________________________ www.kpi.ua 229

Degree Structure for Specialist of Special Metallurgy Fifth Year


Basics of Management 1,5 Basics of Marketing 1,5 Foreign Language 1 Business Communication 1,5 Design of Special Electrometallurgy Shops and Plants 1,5 Foreign Language 1 Automated Control Systems of Special Electric Metallurgy 3 Computer Aided Design Systems 3 Non-Traditional Technologies of Metallurgical Production 1

Design of Special Electrometallurgy Shops and Plants 1,5

Basics of Scientific Researches 8 Basics of Scientific Researches 5 Special Metallurgy in Machine Engineering 3,5

Special Metallurgy in Machine Engineering 1

Technologies and Equipments of Special Electric Metallurgy 1,5

Out-of-Furnace Metal Slags Treatment 3

Special Metallurgy of High Purity Metals and Special Alloys 3

Electromagnetic Treatment of Melts 3

Labour Protection in the Branch 1,5 Intellectual Property 1

Elective Courses Technologies and Equipments of Special Electric Metallurgy (Additional Chapters) 2 Special Metallurgy in Machine Engineering (Additional Chapters) 1 Computer Application in Engineering Calculations 3

Total 27 Total 26 Specialization: Special Metallurgy in Machine Engineering 5


Total 5 Total 5 Specialization: Standardization and Certification of Metallurgical Production 4

Consumer Properties of Metallurgical Production 3

Statistical Quality Maintenance Methods 4

Total 4 Total 7 Specialization: Web-Design 4 Programming with PHP 3

Interactive Programming of Special Electric Metallurgy Processes 4

Total 4 Total 7


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Graduation Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ 230 GENERAL CATALOG 2009-2010

Degree Structure for Master of Special Metallurgy


Course Title Credit Course Title Credit Basics of Management 1,5 Basics of Marketing 1,5 Foreign Language 1 Business Communication 1,5 Basics of Scientific Researches 8 Pedagogics of Higher School 1,5 Design of Special Electrometallurgy Shops and Plants 1,5 Foreign Language 1 Automated Control Systems of Special Electric Metallurgy 3


Non-Traditional Technologies of Metallurgical Production 1 Basics of Scientific Researches 2 Special Metallurgy in Machine Engineering 3,5 Basics of Scientific Researches 1,5 Technologies and Equipments of Special Electric Metallurgy 1,5 Computer-Aided Design Systems 3

Design of Special Electrometallurgy Shops and Plants 1,5


Out-of-Furnace Metal Slags Treatment 3

Special Metallurgy of High Purity Metals and Special Alloys 3

Electromagnetic Treatment of Melts 3

Labour Protection in the Branch 1,5 Intellectual Property 1

Elective Courses Technologies and Equipments of Special Electric Metallurgy (Additional Chapter) 2 Special Metallurgy in Machine Engineering (Additional Chapters) 1 Computer Application in Engineering Calculations 3

Total 27 Total 29


Course Title Credit Course Title Credit Foreign Language 2 Preparation of Thesis 25,5 Problems of Scientific Knowledge 1,5 Scientific Research on the Subject 7,5 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Science of Patent and Copyright 2 Basics of Scientific Researches 5 Metallurgical and Technological Basics of Special Electric Metallurgy 3

Total 18,5 Total 33

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF CHEMICAL ENGINEERING

___________________________________________________________________________ www.kpi.ua 231

Faculty of Chemical Engineering

Faculty of Chemical Engineering (last name “Faculty of Chemical Machine Building”) was founded in 1938 as the chemical, cellulose and paper industries, industry of construction materials were highly developed and there were conducted numerous scientific researches in heat and mass transfer, invention of new technologies and equipment.

The Faculty carries out the development of modern highly productive machines, equipment and new technologies in chemical and special-purpose machine building, chemical oil refining and creation of CAD and process control systems.

The Faculty has 4 departments, 2 scientific and research laboratories and 2 engineering centers. 1400 students are studying at the faculty.

Faculty of Chemical Engineering is a unique complex where the tasks in designing, technology, mechanics, ecology and automation of production are solved at the high scientific and pedagogical level.

http://ahv.kpi.ua


___________________________________________________________________________ 232 GENERAL CATALOG 2009-2010

Speciality: Ecology and Environmental Protection

Degree Structure for Bachelor of Ecology, Environmental Protection and

Well-Balanced Exploitation of Natural Resources


Course Title Credit Course Title Credit Philosophy-2. Ethics, Aesthetics and Science of Religion 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Differential Calculus 8

Higher Mathematics-2. Integral Calculus 7,5

General and Inorganic Chemistry 5 General and Inorganic Chemistry 5,5 Computational Mathematics and Programming-1. Basics 2,5

Computational Mathematics and Programming-2. Calculations 3,5

General Ecology 4 General Physics-1. Mechanics. Heat 3

Biology 6 Geology 3 Soil Science 3 Topography and Cartography 2

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Philosophy-1 2,5 Landscape Ecology 2,5 General Physics-2. Electromagnetism. Optics 4,5 Biogeochemistry 4 Metrology and Climatology 3 Ecological Assessment 3,5 Hydrology 4 Ecological Audit 2 Ecological Law and Management of Environment Protection Activity 3 Ecology of Municipal Systems 2

Radioecology 2 Atmosphere Protection Technology and Equipment 6,5

Technoecology and Man-Caused Safety 6

Processes, Apparatus and Equipment for Atmosphere Protection 5

Environment Monitoring 3 Elective Courses

Organic Chemistry 4 Total 30 Total 31,5

Elective Courses: Basics of Statistical Registration 2 Ecology of Municipal Services 2

Total Total 4


___________________________________________________________________________ www.kpi.ua 233

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 Physical and Chemical Methods of Water Purification 9,5 Human Ecology 4 Projecting of Water Assumption Systems 3 Technological Practical Training 4,5

Physical and Chemical Methods of Water Purification 10

Basics of Design and Construction 4

Main Technologies of Water Purification and Treatment 3

Elective Courses Physical Chemistry 4 Analytical Chemistry 5 Surface Phenomena and Dispersion Systems 2 Analytical Chemistry 5

Total 31 Total 35,5 Elective Courses: Ecological Management 6 Pure Technologies 5 PC Search, Storage and Processing of Information 5

Total 11 Total 5

Fourth Year


Science of Law 2 Nature Management Economics 2,5

Political Science 1,5 Modelling and Forecasting of Environmental Condition 4,5

Ecological Assessment 2 Physical and Chemical Methods of Environmental Analysis 6,5

Labour and Environment Protection 1,5 Foreign Language of the Professional Direction 1,69

Purification Units, Basics of Design 4,5 Preparation of Graduation Thesis 1,5 Recycling and Recuperation of Solid Wastes 5 Basics of Enterprises Projecting 2 Foreign Language of the Professional Direction 1,81

Elective Courses Environment Monitoring 3 Ecological Audit 2,5 Reserve Business 2 Management 1,5 Surface Phenomena and Dispersion Systems 2

Control and Management of Purification Processes 2,5



___________________________________________________________________________ 234 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Ecology and Environmental Protection

Fifth Year



Foreign Language 1 Foreign Language 1 Basics of Marketing 1,5 Labour Protection in the Branch 1

Intellectual Property 1 Physical and Chemical Methods of Water Purification 8,64

Biological Methods of Water Treatment 2

Technologies of Basic Productions and Industrial Ecology 4,92

Physical and Chemical Methods of Water Purification 9,36

Projecting of Water Assumption Systems 3,5

Technologies of Basic Productions and Industrial Ecology 4,58 Basics of Business 1,5

Environmental Protection by Paper and Carton Production 3

Statistical Basics of Ecology Registration 2

Elective Courses

Prospective Technological Processes in Environmental Protection 7,5


Sixth Year



Preparation of Graduation Thesis 21 Pregraduation Practical Training 12

Total 33 Total


___________________________________________________________________________ www.kpi.ua 235

Degree Structure for Master of Ecology and Environmental Protection

Fifth Year


Foreign Language 1 Foreign Language 1 Basics of Marketing 1,5 Pedagogics of Higher School 1,5 Intellectual Property 1 Labour Protection in the Branch 1 Biological Methods of Water Treatment 2 Basics of Scientific Researches 2 Physical and Chemical Methods of Water Purification 9,36

Physical and Chemical Methods of Water Purification 8,64

Technologies of Basic Productions and Industrial Ecology 4,58 Basics of Business 1,5 Environmental Protection by Paper and Carton Production 3

Technologies of Basic Productions and Industrial Ecology 4,92

Statistical Basics of Ecology Registration 2

Projecting of Water Assumption Systems 3,5

Elective Courses

Prospective Technological Processes in Environmental Protection 7,5


Sixth Year


Science of Patent and Copyright 2 Preparation of Thesis 25,5 Philosophic Problems of Scientific Knowledge 1,5 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 PC Search, Storage and Processing of Information 6 Scientific Research on Chosen Subject 7,5

Total 25 Total 25,5


___________________________________________________________________________ 236 GENERAL CATALOG 2009-2010

Speciality: Chemical Technology of Woodworking and

Vegetable Raw Materials

Degree Structure for Bachelor of Chemical Technology


Course Title Credit Course Title Credit Philosophy-2. Ethics, Aesthetics and Science of Religion 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Differential Calculus 8

Higher Mathematics-2. Integral Calculus 7,5

Linear Algebra and Analytic Geometry 3

General Physics-1. Mechanics. Heat 5,5

General and Inorganic Chemistry-1. General Chemistry 7,5

General and Inorganic Chemistry-2. Inorganic Chemistry 8

Computational Mathematics and Programming-1. Basics 4

Computational Mathematics and Programming-2. Calculations 3,5

Engineering and Computer Graphics 3 Applied Mechanics 3

Total 30 Total 31,5

Second Year


Philosophy-1 2,5 Foreign Language 2 Foreign Language 2 Ecology 2 General Physics-2. Electromagnetism. Optics 6

Organic Chemistry-2. Aromatic and Heterocyclic Compounds 6,5

Organic Chemistry-1. Aliphatic Compounds 5

Analytical Chemistry and Instrumental Methods of Analysis-2. Quantitive Analysis 4,5

Analytical Chemistry and Instrumental Methods of Analysis-1. Qualitative Analysis 3

Processes and Apparatus of Chemical Engineering-1. Thermal Processes and Apparatus of Chemical Engineering 5

Theoretical Basics of Electrotechnology 2,5

Manufacturing Technology of Wooden Mass and Complex Chemical Woodworking 7,5

Chemistry of Wood and Synthetic Polymers 9

Elective Courses

Manufacturing Technology of Esters and Cellulose Esters 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 237

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 Analytical Chemistry and Instrumental Methods of Analysis-3. Instrumental Methods of Analysis 2,5 General Chemical Technology 3 Processes and Apparatus of Chemical Engineering-2. Hydromechanical and Mass-Transfer Processes and Apparatus of Chemical Engineering 6,5

Physical Chemistry-2. Kinetics. Electrochemistry 7

Physical Chemistry-1. Thermodynamics 6,5 Technological Practical Training 4,5

Cellulose Technology 5,5 Power Engineering of Chemical and Technological Processes 3

Cellulose Technology 7,5 Elective Courses

Manufacturing Technology of Wooden Plates and Plastics 2

Chemical Treatment of Non-Wooden Raw Material 6

Total 30,5 Total 36

Fourth Year



Political Science 1,5

Mathematical Modelling and PC Application in Chemical Technology 3,5

Labour and Environment Protection 1,5 Cellulose Technology 6,14 Foreign Language of the Professional Direction 1,81 Technology of Paper and Carton 5 Surface Phenomena and Dispersion Systems 3 General Chemical Technology 4 Economics and Organization of Production 2 Cellulose Technology 6,36

Elective Courses Manufacturing Technology of Wooden Plates and Plastics 3 Management 2

Manufacturing Technology of Esters and Cellulose Esters 3

Control and Management of Chemical and Technological Processes 2,5

Technology of Water Purification 5 Total 28,17 Total 25,83


___________________________________________________________________________ 238 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Chemical Technology of Woodworking

and Vegetable Raw Materials

Fifth Year



Basics of Marketing 1,5 Foreign Language 1 Foreign Language 1 Labour Protection in the Branch 1,5


Research Methods of Gaining and Fiber Half-Finished Materials Processes 4,94

Technology of Paper and Carton 7,5 Technology of Paper and Carton Processing and Treatment 4,5


Equipment for Paper-and-Pulp Productions Enterprises 2,5

Purification and Recuperation of Plant Emissions 5,5 Basics of Business 1,5

Basics of Metrology Standardization and Certification 2 Paper Recycling Technology 4

Elective Courses

Chemical Treatment of Non-Wooden Raw Material* 3,5

Peculiarities of Paper and Carton Technology for Printing* 4


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 239

Degree Structure for Master of Chemical Technology of Woodworking and

Vegetable Raw Materials


Course Title Credit Course Title Credit Foreign Language 1 Pedagogics of Higher School 1,5 Basics of Marketing 1,5 Foreign Language 1 Intellectual Property 1 Labour Protection in the Branch 1,5 Technology of Paper and Carton 7,5 Basics of Scientific Researches 2 Purification and Recuperation of Plant Emissions 5,5 Basics of Business 1,5 Research Methods of Gaining and Fiber Half-Finished Materials Processes 6,56

Technology of Paper and Carton Processing and Treatment 4,5

Basics of Metrology Standardization and Certification 2

Equipment for Paper-and-Pulp Productions Enterprises 2,5


Paper Recycling Technology 4 Elective Courses

Chemical Treatment of Non-Wooden Raw Material* 3,5

Peculiarities of Paper and Carton Technology for Printing* 4


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Scientific Data PC Processing 2 Scientific Problems of Paper-and-Pulp Production 2 Scientific Research on Chosen Subject 10



___________________________________________________________________________ 240 GENERAL CATALOG 2009-2010

Speciality: Equipment of Forestry Complex


First Year


Philosophy-2. (Science of Religion, Logic, Ethics and Aesthetics) 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytic Geometry and Analysis Beginning 7

Higher Mathematics-2. Integral Calculus. Theory of Field 6

Descriptive Geometry and Computer Graphics-1. Descriptive Geometry 6

Descriptive Geometry and Computer Graphics-2. Computer Graphics 4

General and Inorganic Chemistry-1. General Chemical Properties 3

General and Inorganic Chemistry-2. Chemical Properties 3

Computer Science 4 Physics-1. Mechanics 5 Technologies of Constructional Materials 5,5

Theoretical Mechanics-1. Statics. Beginning of Kinematics 5,5

Computer Technologies of Pulp-and-Paper Production 4

Total 30 Total 31,5

Second Year


Philosophy 2,5 Foreign Language 2 Foreign Language 2 Theory of Machines Mechanisms 4 Higher Mathematics-3. Theory of Rows, Theory of Function with Complex Variable 6 Ecology 2 Physics-2. Molecular Physics. Electricity and Magnetics 6

Strength of Materials-2. Strength of Materials by Complex Load 6

Theoretical Mechanics-2. Kinematics. Dynamics 3,5 Management 1,5 Material Science 4 Basics of Marketing 1,5 Strength of Materials-1. Basics of Materials Strength 2

Hydraulics and Hydromachines-Basics of Hydraulics 4,5

Numerical Analysis Methods 4,5 Numerical Analysis Methods 3,5

Paper, Carton Producing and Special Machines 1

Equipment Wood Mass Production 5 Total 30,5 Total 31


___________________________________________________________________________ www.kpi.ua 241

Third Year


Economic Theory 2 1,5 Foreign Language 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 Electrical Engineering and Electric Drive-2 3,5

Electrical Engineering and Electric Drive 3

Theoretical Basics of Thermal Engineering 4 Machines Details 1,75

Machines Details 4,25 Technological Basics of Mechanical Engineering 5,5

Hydraulics and Hydraulic Machines 3 Hoist-Transport Machines 1 Interchangeability, Standardization and Technological Measurement 4

Electrophysicochemical Methods of Materials Treatment 2

Hoist-Transport Machines 3 Processes and Apparatus of Paper-and-Pulp Production 6

Technological Practical Training 4,5 Elective Courses

Main Processes and Apparatus of Chemical Productions 5

Computer-Aided Design of Pulp-and-Paper Productions Equipment 3



Course Title Credit Course Title Credit Science of Law 2 Basics of Automatics 1,5

Political Science 1,5 Processes and Apparatus of Paper-and-Pulp Production 4,36

Technological Basics of Mechanical Engineering 1

Calculation and Design of Standard Equipment 3,78

Processes and Apparatus of Paper-and-Pulp Production 4,14


Calculation and Design of Standard Equipment 5,22 Management 1,5 Equipment for Cellulose Production 6 Preparation of Graduation Thesis 1,5 Labour Protection 1,5 Foreign Language of the Professional Direction 1,81

Elective Courses

Basics of Scientific Researches 1,5 Computer Modelling of Pulp-and-Paper Production Processes 3

Equipment for Paper Mass Preparation 2,58


Paper, Carton Producing and Special Machines 1,5

Equipment for Paper Mass Preparation 2,42



___________________________________________________________________________ 242 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Equipment of Forestry Complex

Fifth Year




Intellectual Property 1 Automation of Chemical Productions 5,5

Calculation and Design of Paper and Carton Producing Machines 7,5 Labour Protection in the Branch 1

Equipment Wood Mass Production 7,5 Manufacturing Technology of Paper Producing Machines 3,5


Basics of Mounting and Repair in Paper-and-Pulp Production 3,5

Equipment of Regeneration and Recycling of Wastes in Paper-and-Pulp Production 3


Elective Courses

Computer-Aided Design of Pulp-and-Paper Production Equipment 6 Basics of Marketing 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 243

Degree Structure for Master of Equipment of Forestry Complex

Fifth Year


Foreign Language 1 Foreign Language 1 Intellectual Property 1 Pedagogics of Higher School 1,5 Basics of Marketing 1,5 Labour Protection in the Branch 1 Construction of Main Elements for Paper and Carton Producing Machines 5

Automation of Chemical Productions 5,5

Transfer Process in Oil-Refining and Chemical Productions Equipment 8

Cellulose Production, Assembly and Repair of Paper-and-Pulp Production 7,5

Processes and Equipment of Wood and Mass Production 8 Basics of Scientific Researches 2 Design of Paper and Carton Producing Machines and Special Machines 5,08


Design of Paper and Carton Producing Machines and Special Machines 4,92

Elective Courses

Equipment of Regeneration and Recycling of Wastes in Paper-and-Pulp Production 2,5


Sixth Year


Science of Patent and Copyright 2 Scientific Research on Master's Thesis Subject 6

Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Machines and Equipment of Pulp-and-Paper Production (Special Chapters) 3

Elective Courses Special Chapters of Mathematical Modelling 4,5

Total 16 Total 31,5


___________________________________________________________________________ 244 GENERAL CATALOG 2009-2010

Speciality: Equipment of Chemical Productions and

Factories of Constructional Materials



Course Title Credit Course Title Credit Philosophy-2. (Science of Religion, Logic, Ethics and Aesthetics) 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytic Geometry and Analysis Beginning 7

Higher Mathematics-2. Differential and Integral Calculus 6

Descriptive Geometry and Computer Graphics-1. Descriptive Geometry 6

Descriptive Geometry and Computer Graphics-2. Computer Graphics 4


General and Inorganic Chemistry-2. Chemical Properties 3

Computer Science 4 Physics-1. Mechanics 5 Technologies of Constructional Materials 5,5

Theoretical Mechanics-1. Statics. Beginning of Kinematics 5,5

Basics of Chemical Engineering 2

Chemistry of High-Molecular Compounds 2

Total 30 Total 31,5

Second Year


Philosophy 2,5 Foreign Language 2 Foreign Language 2 Theory of Machines Mechanisms 4 Higher Mathematics-3. Theory of Rows, Theory of Function with Complex Variable 6 Ecology 2 Physics-2. Molecular Physics. Electricity and Magnetics 6


Theoretical Mechanics-2. Kinematics. Dynamics 3,5 Management 1,5 Material Science 4 Basics of Marketing 1,5 Strength of Materials-1. Basics of Materials Strength 2

Hydraulics and Hydromachines-Basics of Hydraulics 4,5

Numerical Analysis Methods 4 Physical Chemistry 2 Numerical Analysis Methods 4 General Chemical Technology 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 245

Third Year



Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2

Electrical Engineering and Electric Drive-2 3,39

Electrical Engineering and Electric Drive-2 3,11

Theoretical Basics of Thermal Engineering 3,5 Machines Details 1,5

Machines Details 4 Technological Basics of Mechanical Engineering 5,5

Hydraulics and Hydraulic Machines 2,5

Main Processes and Apparatus of Chemical Productions 5

Interchangeability, Standardization and Technological Measurement 4 Hoist-Transport Machines 1

Hoist-Transport Machines 3 Electrophysicochemical Methods of Materials Treatment 2


Technological Practical Training 4,5 Elective Courses

Apparatus of Chemical Productions 2 Machines of Chemical Productions 2



___________________________________________________________________________ 246 GENERAL CATALOG 2009-2010

Fourth Year




Political Science 1,5 Management 1,5

Foreign Language of the Professional Direction 1,81 Basics of Automatics 1,5

Technological Basics of Mechanical Engineering 1

Processes and Apparatus of Chemical Production and Oil-Refining Productions 4,36

Hoist-Transport Machines 0,5 Calculation and Design of Standard Equipment 4,36

Labour Protection 1,5 Theoretical Basics of Refrigerating Engineering 0,75

Processes and Apparatus of Chemical Production and Oil-Refining Productions 5,14

Computer-Aided Design of Chemical Productions Equipment 3

Calculation and Design of Standard Equipment 4,64 Preparation of Graduation Thesis 1,5

Theoretical Basics of Refrigerating Engineering 2,25

Elective Courses

Processes and Apparatus of Oil-Refining Productions 2,58

Computer-Aided Design of Chemical Productions Equipment 3

Basics of Scientific Researches 1,5 Electrophysicochemical Methods of Materials Treatment 2




___________________________________________________________________________ www.kpi.ua 247

Degree Structure for Specialist of Equipment of Chemical Productions and Factories of Constructional Materials

Fifth Year



Intellectual Property 1 Automation of Chemical Productions 2,19

Automation of Chemical Productions 3,31 Labour Protection in the Branch 1 Calculation, Design and Assembly of Standard Equipment 7,5

Technology of Chemical Machine Engineering 3,5


Elective Courses Computer-Aided Design of Chemical Productions Equipment 3,06

Computer-Aided Design of Chemical Productions Equipment 2,94

Basics of Marketing 1,5 Specialization

Equipment of Membrane and Refrigerating Engineering 7,5 Equipment for Polymers Treatment 6,5 Equipment of Polymers Production 3 High-Pressure Apparatus 4

Total 27,87 Total 24,63 Specialization: Equipment of Energy Resources Saving Technologies 4,81

Equipment of Energy Resources Saving Technologies 4,19

Ecological Aspects of Chemical Productions Processes 3 Water Purification Equipment 6 Basics of Reliability and Durability 3

Total 10,81 Total 10,19 Specialization: Membrane Equipment of Biotechnological Productions 3

Equipment of Biotechnological Productions 7

Reactors of Biotechnological Productions 3,06

Reactors of Biotechnological Productions 3,44

Processes and Apparatus of Biotechnological Productions 4,5


Sixth Year



Total 33 Total


___________________________________________________________________________ 248 GENERAL CATALOG 2009-2010

Degree Structure for Master of Equipment of Chemical Productions and Factories of Constructional Materials

Fifth Year


Foreign Language 1 Foreign Language 1 Intellectual Property 1 Pedagogics of Higher School 1,5 Basics of Marketing 1,5 Labour Protection in the Branch 1 Automation of Chemical Productions 3,28

Automation of Chemical Productions 2,22


Technological Production, Reliability and Durability of Equipments 3,69

Transfer Process in Oil-Refining and Chemical Productions Equipment 3,72

Basics of Scientific Researches 2


Elective Courses Repair and Assembly 3 Computer-Aided Design of Chemical Productions Equipment 4,5

Specialization

Processes of Membrane Separation 4 Synthesis Equipment in Chemical Technologies 3,94

Synthesis Equipment in Chemical Technologies 3,56

Extrusion Methods of Polymers Treatment 5,5

Basics of Deep Chilling 4 Total 31,34 Total 27,57

Specialization: Physical and Chemical Basics of Ecological Safety for Chemical Productions 3

Mechanical and Physicochemical Water Purification 2

Ecological Reliability of Chemical Productions Equipment 4,5

Membrane Processes of Water Purification 4

Energy Resources Saving Processes of Chemical Production 3,56

Energy Resources Saving Processes of Chemical Production 3,94

Total 11,06 Total 9,94 Specialization: Basics of Theory and Reactors Calculations 3

Projecting and Calculation of Enzymes 3,5

Theoretical Basics of Biotechnological Productions 4,5

Modern Equipment of Products Emission 7

Basics of Biotechnological Equipments Projecting 3



___________________________________________________________________________ www.kpi.ua 249

Sixth Year



Science of Patent and Copyright 2 Scientific Research on Subject of Master's Thesis 6

Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5

Basics of Society's Sustainable Development 2 Technological Production, Reliability and Durability of Equipments 3,31 Transfer Process in Oil-Refining and Chemical Productions Equipment 4,28




___________________________________________________________________________ 250 GENERAL CATALOG 2009-2010

Speciality: Machines and Packaging Technology

Degree Structure for Bachelor of Engineering Mechanics

First Year


Philosophy-2. Science of Religion, Logic, Ethics and Esthetics 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytic Geometry and Analysis Beginning 7

Higher Mathematics-2. Integral Calculus. Theory of Field 6

Descriptive Geometry, Engineering and Computer Graphics-1. Descriptive Geometry 6

Descriptive Geometry, Engineering and Computer Graphics-2. Engineering and Computer Graphics 4


General and Inorganic Chemistry-2. Chemical Properties of Compounds 3

Informatics in Packaging Technologies 4

Physics-1. Mechanics. Molecular Physics 5

Technology of Construction Materials and Material Science 5,5

Theoretical Mechanics-1 Statics. Beginning of Kinematics 5,5

Computer Calculations. Programming 4

Total 30 Total 31,5


Course Title Credit Course Title Credit Philosophy 2,5 Foreign Language 2

Foreign Language 2 Theory of Mechanisms and Machines 4

Higher Mathematics-3. Rows. Theory of Function with Complex Variable 6 Ecology 2 Physics-2. Electromagnetic Waves. Quantum Mechanics. Solid State Physics 6


Theoretical Mechanics-2. Kinematics. Dynamics 3,5

Hydraulics. Executive Devices of Mechanotronic Systems 4,5

Material Science 4 Management 1,5 Strength of Materials-1. Basics of Materials Strength 2 Basics of Marketing 1,5 Computer Calculations. Procedural Programming and Design Basics 4

Elective Courses

Basics of Packages Construction and Design 4,5

Equipment for Polymer Packages Production 5,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 251

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 Machines Details 4,25 Machines Details 1,75 Interchangeability, Standardization and Technological Measurement 4

Technological Basics of Mechanical Engineering 5,5

Theoretical Basics of Thermal Engineering 3 Technological Practical Training 4,5 Hoist-Transport Machines, Rotor and Conveyor Lines 4

Electrical Engineering and Electric Drive 3,11

Electrical Engineering and Electric Drive 3,39

Mounting and Exploitation, Reliability and Repair of Technological Equipment 4,5

Microprocessor Engineering and Control 4

Technology of Packaging and Packed Production Storage 3,5

Processes and Apparatus of Packaging Technologies 6



Fourth Year


Science of Law 2 Basics of Automation 1,5 Political Science 1,5 Management 1,5 Technological Basics of Mechanical Engineering 1,5

Processes and Apparatus of Chemical Productions 3,89

Labour Protection 1,5 Basics of Technological Equipment Exploitation and Repair 3

Processes and Apparatus of Chemical Productions 4,11 Packaging Equipment 1,25 Technologies and Equipments of Packaging Materials Production 3

Basics of Calculation and Machines Construction 3,5

Packaging Equipment 3,75 Preparation of Graduation Thesis 1,5 Foreign Language of the Professional Direction 1,81


Elective Courses

Reliability and Durability 2 Microprocessor Engineering and Control 3,5

Technology of Packaging and Packed Production Storage 2,5

Modern Methods for Calculation of Machines and Apparatus Constructions 2,5

Basics of Packages Construction and Design 4

Equipment for Polymer Packages Production 4



___________________________________________________________________________ 252 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Machines and Packaging Technology

Fifth Year



Basics of Marketing 1,5 Foreign Language 1 Foreign Language 1 Labour Protection in the Branch 1 Intellectual Property 1 Basics of Scientific Researches 2

Computer-Aided Design of Production Equipment 4,08

Computer-Aided Design of Production Equipment 4,42

Mounting, Exploitation and Repair 5 Packaging Equipment 3,69

Mechanotronics Systems 4 Calculations and Design of Packaging Equipment 3,94

Packaging Equipment 4,31 Design of Current Lines 3,5

Calculations and Design of Packaging Equipment 4,06

Elective Courses Computer-Aided Manufacturing 2,53 Computer-Aided Manufacturing 1,97



Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 253

Speciality: Automated Control of Technological

Processes

Degree Structure for Bachelor of Automation and Computer-Integrated Technologies

First Year


Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytic Geometry and Analysis Basics 5

Higher Mathematics-2. Integral Calculus and Theory of Field 7,5

Physics-1. Mechanics and Molecular Physics 5

Physics-2. Electromagnetism and Quantum Physics 6,5

Chemistry-2. General Chemical Processes 3

Chemistry-2. Chemical Properties of Compounds 3

Engineering and Computer Graphics 4,5

Material Science and Materials Processing 3

Numerical Methods-1. Basic Algorithms of Numerical Analysis 3

Numerical Methods-2. Interpolation and Data Smoothing 3,5

Computer Technologies-1. Computer Science and Computer Engineering 5

Computer Technologies-2. Programming Tools of Numeric Analysis 4

Total 30 Total 31,5


Course Title Credit Course Title Credit Philosophy-1 2,5 Foreign Language 2 Foreign Language 2 Ecology 2 Higher Mathematics-3. Rows. Theory of Function with Complex Variable 5,5

Technical Facilities of Automation-1. Electrical Elements and Devices of Automatization 5

Theoretical Mechanics 4

Special Chapters of Mathematics-1. Operational Methods and Theory of Probabilities 3

Computer Technologies-3. Programming with C Language 3

Computer Technology-4. Visual Programming of Application Programs 5,5

Applied Mechanics and Basics of Design 3

Heat Engineering and Hydrogasdynamics-2. Hydrogasdynamics 3

Heat Engineering and Hydrogasdynamics-1. Heat Engineering 4

Electrical Engineering-2. Electric Machines and Electric Drive 5

Electrical Engineering-1. Circles of Direct and Alternating Current 3

Electronics and Microcircuit Engineering 3

General Chemical Technology 3 Technological Objects and Processes of the Branch-1 3

Total 30 Total 31,5


___________________________________________________________________________ 254 GENERAL CATALOG 2009-2010

Third Year




Theory of Automated Control-1. Uninterrupted Control Systems 4

Theory of Automated Control-1. Discrete Control Systems 4,5

Technical Facilities of Automation -2. Electrical and Pneumatic Control Systems 5

Technological Measurements and Equipments-1. Metrology, Heat and Technical Measurements 4


Automation of Branch Technological Processes 5

Electrical Engineering-3. Theory of Electromagnetic Fields 3 Industrial Practical Training 4,5

Technological Objects and Processes of the Branch-2 4

Computer Technologies-5. Automated Tools of Information Systems Development 3

Elective Courses

Microprocessor Engineering-1 4

Microprocessor Engineering-2 Microprocessor Tools in Control Systems 4

Software Tools of Control Systems Design 3

Basics of System Analysis 3

Total 30,5 Total 36

Elective Courses:

Industrial Controllers-1 4 Industrial Controllers-2 4

Software for Computer-Integrated Technological Complexes 3

Industrial Computer Networks 3

Total 4 Total 10


___________________________________________________________________________ www.kpi.ua 255

Fourth Year



Science of Law 2 Identification and Modelling of Technological Objects 1,94

Political Science 1,5 Automation of Standard Technological Processes 3,39

Theory of Automated Control 2 Designing, Assembling and Exploitation of Automatic Systems 2,92

Technical Facilities of Automation 3 Optimization of Technological Processes of Management Systems 2,42

Technological Measurements and Devices 2 Management 1,5

Identification and Modelling of Technological Objects 2,06


Automation of Standard Technological Processes 2,61

Designing, Assembling and Exploitation of Automatic Systems 3,08

Optimization of Technological Processes of Management Systems 2,08 Labour Protection 1,5


Elective Courses Reliability and Diagnostics 3,5 Basics of Computer-Aided Design 4

Special Chapters of Chemical Industry Automation 2,33 Microprocessor Engineering 3

Special Chapters of Chemical Industry Automation 2,67



___________________________________________________________________________ 256 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Automated Control of Technological

Processes


Course Title Credit Course Title Credit Basics of Marketing 1,5 Foreign Language 0,97

Foreign Language 1,03 Designing, Assembling and Exploitation of Automatic Systems 3,19


Data Bases and Intellectual Systems 2,44

Microprocessor Engineering 3 Control of Complicated Chemical and Technological Systems 2,94

Optimization of Technological Processes of Management Systems 3 Statistical Methods 2,94 Data Bases and Intellectual Systems 2,06 Labour Protection in the Branch 1 Control of Complicated Chemical and Technological Systems 3,56 Computer Technologies 3

Statistical Methods 3,06 Automation of Standard Technological Processes 3,69

Intellectual Property 1 Automation of Standard Technological Processes 3,31

Elective Courses Special Chapters of Chemical Industry Automation 3,81


Total 28,64 Total 23,86 Specialization: Computer-Integrated Technological Complexes 3,31

Software of Computer-Integrated Technological Complexes 3

Computer-Integrated Technological Complexes 3,69


Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 257

Degree Structure for Master of Automated Control of Technological

Processes


Course Title Credit Course Title Credit Basics of Marketing 1,5 Pedagogics of Higher School 1,5 Foreign Language 1,03 Foreign Language 0,97 Automation of Standard Technological Processes 3,31 Basics of Scientific Researches 2 Microprocessor Engineering 3 Computer Technologies 3 Designing, Assembling and Exploitation of Automatic Systems 3,06

Automation of Standard Technological Processes 3,69

Optimization of Technological Processes of Management Systems 3




Statistical Methods 3,06 Statistical Methods 2,94 Control of Complicated Chemical and Technological Systems 3,81

Control of Complicated Chemical and Technological Systems 3,19

Intellectual Property 1 Labour Protection in the Branch 1 Elective Courses



Total 29,64 Total 27,86 Specialization: Computer-Integrated Technological Complexes 3,31

Software of Computer-Integrated Technological Complexes 3

Computer-Integrated Technological Complexes 3,69


Sixth Year


Science of Patent and Copyright 2 Preparation of Thesis 25,5 Philosophic Problems of Scientific Knowledge 1,5 Basics of Sustainable Development 2 Imitative Modelling of Objects and Control Systems 4 Special Chapters of Automated Control Systems 8 Scientific Research 6


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF CHEMICAL TECHNOLOGY

___________________________________________________________________________ www.kpi.ua 259

Faculty of Chemical Technology

Faculty of Chemical Technology was one of four faculties of Kiev Polytechnic Institute founded in 1898. Among the professors of the faculty such well-known personalities as M.I. Konovalov, V.B. Timofeyev, M.O. Prilezhayev, L.I. Antropov, F.N. Stepanov, academicians V.G. Shaposhnikov, V.A. Plotnikov and others.

The Faculty consists of 7 departments. Over 10 000 young specialists were trained at the faculty. These are managers of plants and whole industrial branches, prominent scientists, statesmen, over 1000 PhDs and 300 doctors, over 20 academicians and corresponding members.

Main areas of scientific activity: development of modern technologies of new organic, bioorganic, inorganic and composite materials including pest-control in agriculture, medicines, metal corrosion inhibitors, coagulators, electrochemical sensors and devices developed on electrochemical principles.

http://xtf.ntu-kpi.kiev.ua


___________________________________________________________________________ 260 GENERAL CATALOG 2009-2010

Speciality: Chemical Technology of Organic Substances


First Year


Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Philosophy 0 Philosophy 0 Higher Mathematics 1. Differential Equations 5,5

Higher Mathematics 2. Integral Calculus and Differential Equations 6


General Physics 1. Mechanics, Molecular Physics and Thermodynamics 6

General and Inorganic Chemistry 1. Inorganic Chemistry 7,5


Engineering Graphics 3 Information Technologies 2. Basics of Programming 3

Information Technologies 1. Basics of Computer Science 3 Computer Graphics 3

Elective Courses Applied Chemistry 3,5

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Philosophy 2,5 Sociology 1,5

Ukrainian Language 1 Philosophy (Ethics, Aesthetics, Science of Religion) 1

Philosophy 0 Philosophy 0

Higher Mathematics 5 Computational Mathematics and Programming 3,5

Computing Mathematics and Programming 3 Physics 4 Physics 4,5 Organic Chemistry 6,5

Organic Chemistry 5,5 Analytical Chemistry 1. High-Quality Analysis 3

Analytical Chemistry 1. High-Quality Analysis 3

Electrical Engineering and Basics of Electronics 2,5

Applied Mechanics 3 Elective Courses

Special Chapters of Organic Chemistry 7,5



___________________________________________________________________________ www.kpi.ua 261

Third Year


Ecology 2 Economic Theory 2 Physical Chemistry 7,5 Physical Chemistry 7 Processes and Vehicles of Chemical Productions 6

Processes and Vehicles of Chemical Productions 6

Life Safety and Labour Protection 3,5 General Chemical Technology 4 Foreign Language of the Professional Direction 2 Industrial Practical Training 4,5 Energy Technology of Chemical Engineering Processes 2


Stereochemistry of Organic Compounds 7,5

Theory of Organic Synthesis Chemical Processes 5,5

Chemical and Chromatographic Analysis of Organic Matters 3

Elective Courses

Chemistry of Framework Connections 2

Total 30,5 Total 36

Fourth Year


Political Science 1,5 Surface Phenomenon and Dispersion Systems 4

Instrumental Methods of Analysis 2 Preparation of Bachelor's Thesis 1,5

General Chemical Technology 4,5

Mathematical Modelling and Computers in Chemical Technology 3,5

Chemical Technology Processes Control 3,5

Chemistry and Technology of Organic Matters 5,11

Economics and Organization of Chemical Productions 3,5

Equipment of Organic Synthesis Productions 1,94


Spectral Methods of Research 4,5

Equipment of Organic Synthesis Productions 2,56



Elective Courses Basics of Modern Organic Synthesis 3,61

Basics of Modern Organic Synthesis 3,89



___________________________________________________________________________ 262 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Chemical Technology of Organic

Substances

Fifth Year



Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1

Theory of Organic Synthesis Chemical Processes 4,5

Methods of Experiment in Organic Synthesis 6,14



Chemistry and Technology of Organic Matters 6

Perspective Processes of Heavy Organic Synthesis 6

Kinetics and Thermodynamics of Organic and Petrochemical Synthesis 4,5 Intellectual Property 1

Elective Courses Special Chapters of Organic Synthesis 2,78

Special Chapters of Organic Synthesis 4,72


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 263

Degree Structure for Master of Chemical Technology of Organic

Substances



Labour Protection in the Branch 1,5 Philosophic Problems of Scientific Knowledge 1,5

Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Theory of Organic Synthesis Chemical Processes 4,5




Kinetics and Thermodynamics of Organic and Petrochemical Synthesis 4,5

Perspective Processes of Heavy Organic Synthesis

5 Chemistry and Technology of Organic Matters 4,56

Scientific Research on the Chosen Subject 0





Sixth Year


Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Basics of Sustainable Development 2 Modern Trends of Organic Synthesis 6 Planning of Experiment in Chemistry 3,5 Scientific Research on Chosen Subject 11

Total 32 Total 25,5


___________________________________________________________________________ 264 GENERAL CATALOG 2009-2010

Speciality: Chemical Technology of Inorganic

Substances



Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics 1. Differential Equations 5,5



General Physics 1. Mechanics, Molecular Physics and Thermodynamics 5,5



Engineering Graphics 3 Information Technologies 2. Basics of Computer Science 3


Elective Courses Applied Chemistry 4

Total 30,5 Total 31


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy 1 2,5 Sociology 1,5

Ukrainian Language 1 Philosophy 2. Ethics, Esthetics, Science of Religion 1

Higher Mathematics 3. Multiple Integrals. Vectorial Analysis. Rows 5

Computational Mathematics and Programming 2. Numerical Methods 3,5

Computational Mathematics and Programming 1. Algorithmization and Programming 3

General Physics 3. Quantum Optics. Atomic and Nuclear Physics. Physics of Solid 4

General Physics 2. Electrostatics. Electromagnetism. Optics. 5

Organic Chemistry 2. Cyclic Connections 6,5

Organic Chemistry 1. Acyclic Connections 5,5

Analytical Chemistry 2. Quantitative Analysis 3



Applied Mechanics 3

Theoretical Basics of Chemistry and Technology of Water 1. Physical and Chemical Basics 2,5

Elective Courses

Technical Analysis in Inorganic Production 5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 265

Third Year


Foreign Language 2 Economic Theory 2 Ecology 2 Foreign Language 2 Physical Chemistry 1. Chemical Thermodynamics. Phase Equilibrium and Solutions 7,5

Physical Chemistry 2. Chemical Kinetics. Electrochemistry 7

Processes and Vehicles of Chemical Productions 1. Technical Hydraulics. Basics of Heat Transfer 6

Processes and Vehicles of Chemical Productions 2. Mechanical, Hydromechanical and Mass Transfer Processes 6

Life Safety and Labour Protection 3,5 General Chemical Technology 1. Basic Conformities to Law 4

Power Engineering in Chemical Technology 2 Technological Practical Training 4,5 Theoretical Basics of Chemistry and Technology of Water 2. Flowsheets and Equipments 5,5

Theoretical Basics of Chemical Technology for Inorganic Matters 5,5

Crystallography 2 Elective Courses

Special Chapters of General Chemical Technology 3

Computer Information Processing 2 Total 30,5 Total 36

Fourth Year


Political Science 1,5 Superficial Phenomena and Dispersible Systems 4

Instrumental Methods of Analysis 2 Preparation of Bachelor's Thesis 1,5


Mathematical Modelling and Computer Application in Chemical Technology 3,5

Chemical Technology Processes Control 3,5

Chemical Technology of Inorganic Matters 6,06


Equipment of Industry and Planning Basics 3

Chemical Technology of Inorganic Substances 4,94


Methodology of Scientific Researches 4 Foreign Language of the Professional Direction 2,11

Elective Courses Basics of Pharmaceutical Productions 2

Applied Chapters of Chemical Technology for Inorganic Matters 2

Applied Ecology 1,5

Control and Quality Management of Products 1,5



___________________________________________________________________________ 266 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Chemical Technology of Inorganic

Substances


Course Title Credit Course Title Credit Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1

Precise Methods of Inorganic Analysis 4

Disposal and Utilization Technology of Inorganic Productions Wastes 4,5

Disposal and Utilization Technology of Inorganic Productions Wastes 4 Design of Inorganic Productions 3,5 Theory of Processes for Inorganic Productions 3

Chemical Technology of Soda and Its Products 3

Algorithmization and Programming of Technological Calculations 2,5 Intellectual Property 1

Elective Courses Special Chapters of Chemical Technology for Inorganic Matters 5

Special Chapters of Chemical Technology for Inorganic Matters 5,5

Specialization Chemical Technology of Catalysts and Catalytic Processes 4,5

Chemical Technology of Sorbents, Coagulants and Pigments 5,5

Total 26,5 Total 27 Specialization:

Technology and Equipment of Drinking and Technical Water Production 4,5

Chemical Technology and Equipment of Waste Water Purification for Inorganic Productions 5,5

Total 4,5 Total 5,5

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 267

Degree Structure for Master of Chemical Technology of Inorganic

Substances




Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Chemical Technology and Ecology of Inorganic Productions 5

Chemical Technology and Ecology of Inorganic Productions 5

Precise Methods of Inorganic Matters Analysis 4 Scientific Searching 4,5 Scientific Searching 3,5 Design of Inorganics Productions 3,5 Theory of Processes for Inorganic Productions 3 Algorithmization and Programming of Technological Calculations 2,5 Intellectual Property 1

Elective Courses Special Chapters of Chemical Technology for Inorganic Matters 4,5

Special Chapters of Chemical Technology for Inorganic Matters 6

Total 28 Total 25,5

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Modern Problems of Chemical Technology for Inorganic Matters 3 Dataware of Scientific Research 3 Scientific Research on Chosen Subject 11



___________________________________________________________________________ 268 GENERAL CATALOG 2009-2010

Speciality: Technical Electrochemistry


First Year


Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics 1 5,5 Higher Mathematics 2 6


General Physics 1. Mechanics, Molecular Physics and Thermodynamics 5,5

General and Inorganic Chemistry 1. General Chemistry 7,5




Elective Courses Technique of Chemical Experiment 4

Total 30,5 Total 31

Second Year


Foreign Language 2 Foreign Language 2 Philosophy 1 2,5 Sociology 1,5 Ukrainian Language 1 Philosophy 2. Ethics, Esthetics 1 Higher Mathematics 3. Multiple Integrals. Vectorial Analysis. Rows 5

Computational Mathematics and Programming 3,5

Computational Mathematics and Programming 1 3

General Physics 3. Atomic and Nuclear Physics. Physics of Solid Matters 4

General Physics 2. Electromagnetism. Optics 5

General Chemistry 2. Cyclic Connections 6,5





Applied Mechanics 3 Material Science 2,5 Elective Courses

Introduction to Occupation 5 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 269

Third Year


Foreign Language of the Professional Direction 2 Economic Theory 2

Ecology 2 Foreign Language of the Professional Direction 2

Physical Chemistry 1. Chemical Thermodynamics 7,5

Physical Chemistry 2. Chemical Kinetics 7

Processes and Vehicles of Chemical Productions 1 6

Processes and Vehicles of Chemical Productions 2 6

Life Safety and Labour Protection 3,5 General Chemical Technology 1. Basic Conformities to the Law 4

Energy Technology of Chemical-Engineering Processes 2 Technological Practical Training 4,5 Theoretical Electrochemistry 1. The Equilibrium and Non-equilibrium Phenomena 7,5

Theoretical Electrochemistry 1. Kinetics of Electrodynamic Processes 9

Technical Electrochemistry 1. Kinetics of Some Electrodynamic Processes 1,5

Total 30,5 Total 36

Fourth Year


Political Science 1,5 Surface Phenomenon and Dispersion Systems 4

Instrumental Methods of Analysis 2 Preparation of Graduation Thesis 1,5


Mathematical Modelling and Computers in Chemical Technology 3,5

Chemical Technology Processes Control 3,5 Technical Electrochemistry 6,33 Economics and Organization of Chemical Productions 3,5


Technical Electrochemistry 5,67 Material Science 2 Foreign Language of the Professional Direction 2,11

Elective Courses

Electrolysis of Ion Fusions 2 Hydro- and Electrometallurgy, Electrotype 2

Standard Metrology and Control over Quality of Products 1,5

Electrochemical Treatment of Metals 2

Basics of Planning of Industrial Equipment 2,5



___________________________________________________________________________ 270 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Technical Electrochemistry

Fifth Year


Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1 Manufacturing of Chemical Products with Electrolysis 7 Plating Technology 5

Plating Technology 5 Devices and Research Methods in Electrochemistry 4,25

Devices and Research Methods in Electrochemistry 4,25 Equipment of Galvanizing Rooms 1,5 Metal Corrosion 5,25 Metal Corrosion 5,25 Intellectual Property 1

Elective Courses Environmental Safety of Electroplating 3 Renewable Energy Sources 1,5

Corrosion Protection of Equipment by Designing 3

Total 28 Total 25,5 Specialization:

Theory of Metal Corrosion 6 Corrosion Protection Methods for Metals 3

Inhibitors of Metal Corrosion 1,5 Total 6 Total 4,5

Specialization:

Metal Corrosion and Protection 6 Production of Boards for Printing Wiring 1,5

Technology of Nonmetallic Coatings 3

Total 6 Total 4,5

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 271

Degree Structure for Master of Technical Electrochemistry

Fifth Year



Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Manufacturing of Chemical Products with Electrolysis 7 Plating Technology 5

Plating Technology 5 Devices and Research Methods in Electrochemistry 4,25

Devices and Research Methods in Electrochemistry 4,25 Equipment of Galvanizing Rooms 1,5 Metal Corrosion 5,25 Metal Corrosion 5,25 Intellectual Property 1

Elective Courses

Corrosion Protection of Equipment by Designing 3

Total 27 Total 25,5

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Modern Problems of Technical Electrochemistry 4 Theoretical Basics of Electrochemical Methods 3 Scientific Research on Chosen Subject 11



___________________________________________________________________________ 272 GENERAL CATALOG 2009-2010

Speciality: Chemical Technology of High Temperature

Non-Metallic and Silicate Materials



Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics-1. Differential Equations 5,5








Elective Courses Constructional Materials 3,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy 1 2,5 Sociology 1,5 Ukrainian Language 1 Philosophy 2. Ethics, Aesthetics 1

General Physics 2. Electromagnetism. Optics 4,5










Applied Mechanics 3 Elective Courses

Silicate Material Science 4

Special Chapters of Composite Materials 4

Total 29,5 Total 32


___________________________________________________________________________ www.kpi.ua 273

Third Year


Foreign Language 2 Economic Theory 2 Ecology 2 Foreign Language 2 Physical Chemistry 1. Chemical Thermodynamics. Phase Equilibrium and Solutions 7,5

Physical Chemistry 2. Chemical Kinetics. Electrochemistry 7

Processes and Vehicles of Chemical Productions 1. Technical Hydraulics. Heat Processes. Processes in Heterogeneous Mixtures Mixing of Liquids and Gases 6

Processes and Vehicles of Chemical Productions 2. Mass Exchange Processes, Drying, Grinding and Classification of Materials. Formation Processes of Products 6


Energy Technology of Chemical Engineering Processes 2 Technological Practical Training 4,5 Heat Processes in Technology of High Temperature Non-Metallic and Silicate Materials 1. Phase and Chemical Processes. Heat and Mass Exchange 2,5

Heat Processes in Technology of High Temperature Non-Metallic and Silicate Materials 2. Experimental Determination of Coefficients by Heat Treatment 2,5

Crystallography and Mineralogy 5,5

Ovens and Dryers in Technology of High Temperature Non-Metallic and Silicate Materials 3,5

Elective Courses

Introduction to Technology of Constructional Products 2,5

Total 31 Total 34


Course Title Credit Course Title Credit Political Science 1,5 Foreign Language 2

Foreign Language 2 Superficial Phenomena and Disperse Systems 4

Tool Methods of Analysis 2 Preparation of Graduation Thesis 1,5 General Chemical Technology 1. Basic Conformities to the Law 4,5

Mathematical Modelling and Computer Application in CT 3,5

Control and Management of CTP 3,5 Physical Chemistry of Refractory Nonmetal and Silicate Materials 3,5


Equipment of the Branch and Basics of Planning 4

Physical Chemistry of Refractory Nonmetal and Silicate Materials 3,5

Main Technologies of Refractory Nonmetal and Silicate Materials 4

Basics of Refractory Nonmetal and Silicate Materials Technology 5 Heat Processes in Technology of High Temperature Non-Metallic and Silicate Materials 1,5

Elective Courses Special Research Methods of Silicate Systems 2,5

Resource-Saving and Raw Materials of Silicate Products 3,5

Total 29,5 Total 26


___________________________________________________________________________ 274 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Chemical Technology of High

Temperature Non-Metallic and Silicate Materials


Course Title Credit Course Title Credit Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1 Dataware of Composite Materials Research 4,5

Standardization, Metrology in Technological Binding Materials 3

Chemical Technology of Binding and Composite Materials 4,5


Nature of Binding Properties and Chemical Technology of Inorganic Compounds 4


Use Reliability of Constructional Materials 2 Special Materials and Products 5,5 Special Materials and Products 4,5 Intellectual Property 1

Elective Courses Special Chapters of Chemical Engineering Binding Substances 4

Special Chapters of Chemical Engineering Binding Substances 4,5

Total 27 Total 26,5 Specialization: Surface Chemistry and Formation of Protective Coatings 2

Technology of Alabaster, Lime Carbonate and Products on its Basis 5

Equipment for Plants of Alabaster, Lime Carbonate and its Products Producing 3

Total 5 Total 5 Specialization:

Composite Materials 2 Technology of Special Binding Materials and Products on its Basis 5

Equipment of Cement, Asbestos and Cement Producing Plants 3

Total 5 Total 5

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 275

Degree Structure for Master of Chemical Technology of High Temperature

Non-Metallic and Silicate Materials




Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Information Maintenance for Research of Composite Materials 4,5

Stabdardization, Metrology in Technology of Binding Materials 3





Exploitation Reliability of Constructional Materials 2 Scientific Research 5 Composite Materials 2 Scientific Research 4 Intellectual Property 1

Elective Courses Special Chapters of Chemical Technology for Binding Substances 2,5

Special Chapters of Chemical Technology for Binding Substances 4,5

Total 29 Total 27,5

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Basics of Sustainable Development 2 Contemporary Problems of Technology for Binding Materials 3 Scientific Research on Chosen Subject 11



___________________________________________________________________________ 276 GENERAL CATALOG 2009-2010

Speciality: Technology of Polymers Treatment


First Year


Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics- 1.Differential Equations 5,5

Higher Mathematics 2 Integral Calculus and Differential Equations 6







Elective Courses Introduction to Occupation 3,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy 1 2,5 Sociology 1,5 Ukrainian Language 1 Philosophy 2. Ethics, Aesthetics 1











Applied Mechanics 3 Polymer Material Science 5,5 Elective Courses

Crystal Chemistry of Filling Compounds 2,5

Total 29,5 Total 32


___________________________________________________________________________ www.kpi.ua 277

Third Year


Foreign Language 2 Economic Theory 2 Ecology 2 Foreign Language 2

Physical Chemistry 2. Chemical Kinetics. Electrochemistry 7,5

Physical Chemistry 1. Chemical Thermodynamics. Phase Equilibrium and Solutions. 7

Processes and Vehicles of Chemical Productions 2. Mass Exchange Processes, Drying, Grinding and Classification of Materials. Formation Processes of Products 6

Processes and Vehicles of Chemical Productions 2. Mass Exchange Processes, Drying, Grinding and Classification of Materials. Formation Processes of Products. 6


Energy Technology of Chemical Engineering Processes 2 Technological Practical Training 4,5

Chemistry and Physics of Polymers 5

Theoretical Fundamentals of Polymers and Elastomers Treatment 4

Polymerization (Polycondensation) Materials 3

Technology of Polymers and Elastomers Treatment 4

Elective Courses

Technological Additions of Polymer Compositions 2

Total 31 Total 35,5


___________________________________________________________________________ 278 GENERAL CATALOG 2009-2010

Fourth Year


Political Science 1,5 Superficial Phenomena and Disperse Systems 4

Tool Methods of Analysis 2 Preparation of Graduation Thesis 1,5 General Chemical Technology 1. Basic Conformities to the Law 4,5

Mathematical Modelling and Computer Application in CT 3,5

Control and Management of CTP 3,5

Theoretical Fundamentals of Polymers and Elastomers Treatment Technology 2,5


Equipment of the Branch and Basics of Planning 3,5

Theoretical Fundamentals of Polymers and Elastomers Treatment 2

Main Formation Technologies of Protective Coatings 2

Composite Materials 2 Foreign Language of the Professional Direction 1,89

Technology of Polymers and Elastomers Treatment 3 Foreign Language of the Professional Direction 2,11

Elective Courses Special Research Methods of Polymers and Elastomers 3,5

Physicochemical Mechanics of Disperse Systems 2,5

Special Research Methods of Polymers and Elastomers 4



___________________________________________________________________________ www.kpi.ua 279

Degree Structure for Specialist of Technology of Polymers Treatment

Fifth Year


Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1 Dataware of Polymer Materials Research 4,5

Standardization, Metrology in Polymers Technology 3

Chemistry of High-Molecular Compounds and Elastomers 6,5

Chemistry of High-Molecular Compounds and Elastomers 7

Technology of Plastic Processing 4,5 Technology of Plastic Processing 3,5 Technology of Elastomers Processing 2,5

Technology of Elastomers Processing 3

Use Reliability of Constructional Materials 2 Intellectual Property 1

Elective Courses Special Chapters of Polymers and Elastomers Production 4

Special Chapters of Polymers and Elastomers Production 4,5

Total 27,5 Total 26

Sixth Year




Total 33 Total


___________________________________________________________________________ 280 GENERAL CATALOG 2009-2010

Degree Structure for Master of Technology of Polymers Treatment

Fifth Year



Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Dataware of Polymer Materials Research 4,5

Standardization, Metrology in Polymers Technology 3

Chemistry of High-Molecular Compounds and Elastomers 5,5

Chemistry of High-Molecular Compounds and Elastomers 5

Technology of Plastic Processing 4 Technology of Plastic Processing 4 Use Reliability of Constructional Materials 2 Scientific Searching 5 Intellectual Property 1 Scientific Searching 4

Elective Courses Special Chapters of Polymers and Elastomers Production 4

Special Chapters of Polymers and Elastomers Production 3,5

Total 29,5 Total 27

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Basics of Sustainable Development 2 Modern Problems of Polymers Technology 3 Scientific Research on Chosen Subject 11



___________________________________________________________________________ www.kpi.ua 281

Speciality: Computer-Integrated Technological

Processes and Productions


First Year


Foreign Language 2 Foreign Language 2 Science of Law 1,5 Psychology 1,5 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics-1. Linear Algebra and Differential Equations 6


General and Inorganic Chemistry 5


Algorithmization and Programming 1. Basics of Algorithms 3,5

Algorithmization and Programming 2. Programming 5

Computer Engineering and Organization of Computer Operations 1. Computer Engineering 2

Computer Engineering and Organization of Computer Operations 2. Computer Operations 3,5

Engineering Graphics 3 Theoretical and Applied Mechanics 1. Theoretical Mechanics 3

Organization of Scientific Researches 3 Organic Chemistry 3 Principles of Sustainable Development 3

Total 30 Total 31,5


___________________________________________________________________________ 282 GENERAL CATALOG 2009-2010

Second Year



Philosophy 1 2,5

Philosophy 2 (Ethics and Aesthetics, Science of Religion, Logic) 1

Ukrainian Language 1 Sociology 1,5 Higher Mathematics 3. Multiple Integrals. Vectorial Analysis. Rows 4,5

General Physics 3. Atomic and Nuclear Physics. 4


Electrical Engineering and Basics of Electronics 3

Algorithmization and Programming-3. Programming in MS Excel and Word 2,5

Algorithmization and Programming-4. Programming in VB 3

Theoretical and Applied Mechanics 2. Applied Mechanics 2

Theory of Probability and Random Processes 5

Basics of Computer-Integrated Control 4

Thermodynamics and Energy Technology 5,5

Computer Graphics 3 Information Systems and Complexes 6,5

Physical Chemistry 4 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 283

Third Year


Foreign Language of the Professional Direction 2 Economic Theory 2 Numerical Methods and Mathematical Modelling with Computer 1. Numerical Methods 5


Ecology 2

Numerical Methods and Mathematical Modelling with Computer 2. Mathematical Modelling with Computer 5


Metrology, Technological Measurements and Devices 2. Technological Measurements and Devices 2

Automation Equipment and Microprocessor Technology 5

Metrology, Technological Measurements and Devices 2. Technological Measurements and Devices 0,5

Metrology, Technological Measurements and Devices 1. Metrology 2,5 Theory of Automated Control 4,5 Typical Production Processes and Equipment of Automation Processes 1. Typical Production Processes 6

Typical Production Processes and Equipment of Automation Processes 2. Equipment of Automation Objects 4

General Chemical Technology 4,5 Industrial Practical Training 4,5

System Analysis of Complicated Chemical Engineering Complexes 1. Basics of System Analysis 4

Basics of CAD and Automation of Chemical Processes 1 2,5

Elective Courses

Applied Computer Systems in Chemical Technology 5

Total 30,5 Total 36


___________________________________________________________________________ 284 GENERAL CATALOG 2009-2010

Fourth Year


Political Science 1,5 Macrokinetics and Chemical Hydrogasdynamics 5

Theory of Automated Control 1 Identification and Modelling of Automation Objects 3

Automation of Technological Processes 3

Basics of Automated Systems Designing 3

System Analysis of Complicated Chemical Engineering Complexes 1. Basics of System Analysis 5 Automation of Business Processes 2 Basics of CAD and Automation of Chemical Processes 1 3


Preparation of Graduation Thesis 1,5 Economics and Organization of Chemical Productions 3,5 Optimization Methods of Chemical Engineering Processes 3 Foreign Language of the Professional Direction 2

Elective Courses

Basics of Work with Modern Integrated Complexes 5

Artificial Intellect Methods and Its Application in Chemical Technology 3

Quantum-Chemical Calculations 3


Total 28,5 Total 27


___________________________________________________________________________ www.kpi.ua 285

Degree Structure for Specialist of Computer-Integrated Technological



Course Title Credit Course Title Credit Labour Protection in the Branch 1,5 Basics of Business 4 Foreign Language 1 Foreign Language 1 Mathematical Models of Chemical Reactors and Main Chemical Engineering Processes 3

Mathematical Models of Chemical Reactors and Main Chemical Engineering Processes 3

Optimization of Chemical Engineering Systems 2

Optimization of Chemical Engineering Systems 2,5

Modelling of Energy-Saving and Ecological Systems 3

CEP Control and Computer Design Technologies 2,75

Chemical-Engineering Processes Control and Computer Design Technologies of Control Systems 4,25

Basics of Computer Material Science 3

Planning of Optimal Experiment 3 Automation of Modelling 2,5

Automation of Modelling 3 Intellectual Systems of Decisions Making 3


Visualization Computer Methods of Researches 2,5


Basics of Work with Modern Integrated Complexes 3,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 286 GENERAL CATALOG 2009-2010

Degree Structure for Master of Computer-Integrated Technological





Foreign Language 1 Basics of Business 4 Basics of Scientific Researches 2 Foreign Language 1 Mathematical Models of Chemical Reactors and Main Chemical Engineering Processes 3

Mathematical Models of Chemical Reactors and Main Chemical Engineering Processes 3

Optimization of Chemical Engineering Systems 2

Optimization of Chemical Engineering Systems 2,5

Modelling of Energy-Saving and Ecological Systems 3

CEP Control and Computer Design Technologies 3

Chemical-Engineering Processes Control and Computer Design Technologies of Control Systems 4

Basics of Computer Material Science 3

Planning of Optimal Experiment 3 Automation of Modelling 2,5

Intellectual Property 1 Intellectual Systems of Decisions Making 3

Automation of Modelling 3 Elective Courses

Basics of Work with Modern Integrated Complexes 3,5


Total 27 Total 27,5

Sixth Year


Pedagogics of Higher School 1,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Optimization Methods of Chemical Engineering Processes 3 Modern Computer Technologies 3 Basics of Society's Sustainable Development 2 Scientific Research 10,5 Preparation of Master's Thesis 25,5

Total 50,5 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF HEAT POWER ENGINEERING

___________________________________________________________________________ www.kpi.ua 287

Faculty of Heat Power Engineering

Faculty of Heat Power Engineering is powerful educational and scientific complex that has 5 departments and branching system of scientific and research subdepartments. The Faculty was founded in 1931.

The pioneers of this field were well-known scientists O. Radzych, K. Zvorikyn, O. Stupin, T. Ussenko, G. Gritsky, I. Ladizhinsky, M. Kichigan and others.

Significant contributions to the faculty’s scientific research have been made by Ukrainian academicians I. Shvets and V. Tolubinsky. Investigations were carried out in connection with the general scientific field in “Raising efficiency and reliability of heat power equipment due to technical diagnostic systems, little waste and waste-free power generation”.

The Faculty has a great labor potential – 15 professors, 69 PhDs and most of them are faculty’s graduates. There are prominent scientists and teachers, among them are State prize holders, honored science and education workers, academicians and corresponding members of branching academies.

The department graduate experts in heat and nuclear power engineering field, research and automation of heat-and-power processes, computer technologies in power engineering, which are able to design, exploit and tune up power equipment of thermoelectric and nuclear power stations (TPS and NPS) and industrial enterprises, modern computerized control and management systems of enterprises.

http://tef.kpi.ua


___________________________________________________________________________ 288 GENERAL CATALOG 2009-2010

Speciality: Heat-Power Engineering

Degree Structure for Bachelor of Heat-Power Engineering

First Year


Foreign Language 2 Foreign Language 2 Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Higher Mathematics 1. Linear Algebra. Differential Equations. 7,5

Higher Mathematics-2. Integral Calculus. Differential Equations 5

Physics 1. Mechanics. Molecular Physics. 5

Physics 2. Oscillations and Waves. Electricity and Magnetics 5

Engineering and Computer Graphics 1.Technical Drawing. 5 Chemistry 4 Information Technologies-1. Basics of Computer Science 4

Engineering and Computer Graphics-2. Computer Graphics 2

Material Science and Technology of Materials 4

Information Technologies-2. Basics of Programming 4

Mathematical Methods and Models 2 Theoretical Mechanics. 4

Elective Courses History of Ukrainian Cossacks 1,5

Total 30 Total 31,5

Second Year



Philosophy 1 2,5

Technical Mechanics-2. Construction of Apparatus, Machines and Mechanisms 4

Higher Mathematics-3. Numerical and Functional Rows. Multiple, Curvilinear and Surface Integrals 4,5 Ecology 2

Technical Mechanics-1. Strength of Materials 6

Technical Thermodynamics-2. Thermodynamics of Flow. Cycles of Heat Machines 5

Hydrogasdynamics 6 Heat and Mass Transfer-1. Theory of Heat and Mass Transfer 6

Technical Thermodynamics-1. Thermodynamics of Immovable Systems 4 Fuel and Combustion Equipments 4 Basics of Electrical Engineering and Electronics. 5 Heat Power Measurement 4

Elective Courses

Use of Non-Traditional Power Sources 4,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 289

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Sociology 1,5 Heat and Mass Transfer-2. Heat Transfer Apparatus 4,5

Heat and Mass Transfer-3. Course Project 1,5

Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5 Boiler Sets of Industrial Enterprises-1. Main and Auxiliary Equipments 3

Heat and Technological Processes and Supplies-1. Heat Carriers, Dryers, Refrigerants 5

Compressors and Heat Engines 5 Boiler Sets of Industrial Enterprises-2. Water Preparation 3

Production Systems and Energy Carriers Distribution-1. Water- and Air-Supplying 5,5

Heat Power Supply Sources and Consumers of Heat 6

Electrical Supply of Industrial Enterprises 4 Heat Power Plants 3

Production Systems and Energy Carriers Distribution-2. Gas-Supplying 1,5

Elective Courses

Automated Control Systems 1

High-Temperature Heat and Technological Processes and Supplies 5

Special Issues in Hydrogasdynamics 3

Total 30,5 Total 36


___________________________________________________________________________ 290 GENERAL CATALOG 2009-2010

Fourth Year


Science of Law 2 Economics of Power Engineering 1,5 Political Science 1,5 Heat Networks 2

Labour Protection 1,5 Production Systems and Energy Carriers Distribution 2,39

Boiler Sets of Industrial Enterprises 2 Automated Systems for Heat and Power Engineering Processes 1,5

Heat Power Supply Sources 6 Design of Heat Energy Systems 1,5 Production Systems and Energy Carriers Distribution 2,61


Heat and Technological Processes and Supplies 3 Bachelor's Thesis 1,5 Heat Power Plants of Industrial Enterprises 3 Foreign Language of the Professional Direction 2,11

Elective Courses Heat and Technological Processes and Supplies 1,5 Basics of Scientific Researches 2 Heat Power Supply Sources and Consumers of Heat 2

Methods of Thermodynamic Analysis 3

Production Systems and Energy Carriers Distribution 1,89

Electrical Supply of Industrial Enterprises 3

Methods of Thermodynamic Analysis 2

Heat Networks 2

Production Systems and Energy Carriers Distribution 1,11



___________________________________________________________________________ www.kpi.ua 291

Degree Structure for Specialist of Heat-Power Engineering

Fifth Year


Marketing 1,5 Management in Energy Technology 1,5 Organization and Planning of Industry 2,5 Foreign Language 1 Foreign Language 1 Labour Protection in Heat Power 1,5 High-Temperature Heat and Technological Processes and Supplys 4,5 Integrated Computer Technologies 3,61 Use of Non-Traditional Power Sources 3,5

Automated Systems for Heat and Power Engineering Processes 1,5

Use of Heat Recovery Systems 4

Systems and Facilities of Neutralization for Industrial Waste Products 4,5

Design of Heat Energy Systems 1,5 Energy Saving in Heat-Providing 5 Basics of Mounting and Exploitation of Heat Power Units 2,5 Industrial Ecology 1,5 Integrated Computer Technologies 3,89 Intellectual Property 1

Elective Courses Design of Heat Energy Systems (Special Course) 1

Integrated Computer Technologies (Special Course) 1

Use of Heat Recovery Systems (Special Course) 1,5

Energy Saving in Heat-Providing (Special Course) 2

Use of Non-Traditional Power Sources (Special Course) 1


Sixth Year



Total 33 Total


___________________________________________________________________________ 292 GENERAL CATALOG 2009-2010

Degree Structure for Master of Heat-Power Engineering


Course Title Credit Course Title Credit Marketing 1,5 Pedagogics of Higher School 1,5 Organization and Planning of Industry 2,5 Management in Energy Technology 1,5 Foreign Language 1 Foreign Language 1 High-Temperature Heat and Technological Processes and Supplies 4,5 Basics of Scientific Researches 2 Use of Non-Traditional Power Sources 3,5


Use of Heat Recovery Systems 4 Labour Protection in Heat Power 1,5 Design of Heat Energy Systems 1,5 Integrated Computer Technologies 3,61

Integrated Computer Technologies 3,89 Automated Systems for Heat and Power Engineering Processes 1,5

Basics of Mounting and Exploitation of Heat Power Units 2,5

Systems and Facilities of Neutralization for Industrial Waste Products 4,5

Intellectual Property 1 Energy Saving in Heat-Providing 5 Industrial Ecology 1,5

Elective Courses Use of Heat Recovery Systems (special course) 2,5

Integrated Computer Technologies (special course) 1,5

Use of Non-Traditional Power Sources (special course) 1,5

Energy Saving in Heat-Providing (special course) 1,5

Basics of Mounting and Exploitation of Heat Power Units (special course) 0,5

Systems and Facilities of Neutralization for Industrial Waste Products (special course) 0,5

Design of Heat Energy Systems (special course) 1


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5 Foreign Language 1 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Science of Patent and Copyright 2 Basics of Thermomolecular Heat Power and Technology 2 Scientific Research on Subject of Master's Thesis 10,5

Total 22 Total 25,5


___________________________________________________________________________ www.kpi.ua 293

Speciality: Heat Power Stations


First Year

First Semester Second Semester Credit Course Title Credit

Foreign Language-1 2 Foreign Language-1 2 Philosophy-2 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics 1.Linear Algebra. Differential Equations 7,5


General Physics-1. Mechanics. Molecular Physics 5

General Physics-2. Oscillations and Waves. Electromagnetism 5

Engineering and Computer Graphics-1 5 Chemistry 4 Information Technologies-1. Basics of Information Technologies and Programming 4


Material Science and Technology of Materials 4

Information Technologies-2. Basics of Programming. Mathematical Methods and Models 6

Theoretical Mechanics 4 Elective Courses

History of Ukrainian Cossacks 1,5 Total 30 Total 31,5

Second Year



Foreign Language-2 2

Technical Mechanics-2. Construction Basics of Apparatus, Machines and Mechanisms 4

Philosophy-1 2,5 Ecology 2

Higher Mathematics 4,5 Technical Thermodynamics-2. Thermodynamics of Flow. Cycles 5


Heat Mass Exchange-1. Theory of Heat Mass Exchange 6

Hydraulic Gas Dynamics. 6 Boilers of Heat Power Plants-1 3 Technical Thermodynamics-1. Thermodynamics of Immovable Systems 4

Turbines of Heat and Atomic Power Plants-1 5,5

Basics of Electrical Engineering and Electronics 5

Fuel Burning and Equipment for Burning 4

Total 30 Total 31,5


___________________________________________________________________________ 294 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Sociology 1,5 Heat Mass Exchange-2. Heat Exchange Apparatus 5 Industrial Practical Training 4,5

Life Safety and Labour Protection 3,5 Turbines of Heat and Atomic Power Plants-3 1,5

Boilers of Heat Power Plants 6

Heat and Mass-Exchange Apparatus of Heat and Atomic Power Plants 4

Turbines of Heat and Atomic Power Plants-2 3,5

Heat and Atomic Power Plants and Units-2 4

Heat and Atomic Power Plants and Units-1 6

Electrical Part of Electric Power Stations 5

Heat and Technical Measurements-1 2 Collectors and Heat Engines 3,5

Heat and Technical Measurements-2 4,5

Elective Courses

Reliability of Power Engineering Equipment for Heat and Atomic Power Plants 3

Basics of Scientific Researches and Experiment Planning 1

Total 30 Total 34,5


Course Title Credit Course Title Credit Science of Law 2 Economics of Power Engineering 3


Heat and Mass-Exchange Apparatus of Heat and Atomic Power Plants 0

Labour Protection 1,5 Heat and Atomic Power Plants and Units 4

Turbines of Heat and Atomic Power Plants 1,5 Heat-Extraction and Heat Networks 3 Heat and Mass-Exchange Apparatus of Heat and Atomic Power Plants 3

Technological Systems of Heat Power Plants and Environment Protection 2

Heat and Atomic Power Plants and Units 4 Nuclear Power Plants 1,5 Electrical Part of Electric Power Stations 5


Foreign Language of the Professional Direction 2 Preparation of Pregraduation Thesis 1,5

Elective Courses Reliability of Power Engineering Equipment for Heat and Atomic Power Plants* 2

Automated Systems of Heat Power Processes Control 4

Basics of Scientific Researches and Experiment Planning** 2 Computer Graphics** 3,5 Computer Graphics** 3,5

Total 28 Total 24,5


___________________________________________________________________________ www.kpi.ua 295

Degree Structure for Specialist of Heat Power Stations


Course Title Credit Course Title Credit Marketing 1,5 Management in Power Engineering 1,5 Foreign Language 1 Foreign Language 1 Organization and Planning of Power Production 4,5 Labour Protection in the Branch 1,5

Modelling in Power Engineering 3 Operation Modes and Exploitation of Heat Power Plants 4,5

Heat-Extraction and Heat Networks 1,5 Projecting of Heat and Atomic Power Plants 3

Automated Systems of Heat Power Processes Control 4,5

Assembling and Repair of Heat Power Plants 3

Gas Turbine and Steam Gas Units 4,5 Computer-Aided Design of Heat Power Plants 2

Exploitation of Power Equipment 3 Diagnostics of Heat Power Equipment for Heat and Atomic Power Plants 2 Ecology of Electric Power Plants 2,5 Energy-Saving Technologies of Heat Power Plants 1,5

Elective Courses Intellectual Property 1 Computer Graphics** 3,75 Computer Graphics** 3,75

Total 34,25 Total 20,25 Specialization: Efficiency Improvement of Heat Supply Systems 3

Designing, Assembling and Repair of Heat Networks 2

Industrial and Heat Boiler Plants 2 Total 5 Total 2

Specialization: Power Industry Technologies and Air Pool Protection 3

Nature Protection Technologies and Exploitation of Heat Power Units 2

Power and Ecological Diagnostics of Heat and Atomic Power Plants 2

Total 5 Total 2

Sixth Year



Total 33 Total


___________________________________________________________________________ 296 GENERAL CATALOG 2009-2010

Degree Structure for Master of Heat Power Stations


Course Title Credit Course Title Credit Marketing 1,5 Pedagogics of Higher School 1,5 Organization and Planning of Power Production 4,5 Management in Power Engineering 1,5 Foreign Language 1 Foreign Language 1 Modelling in Power Engineering 3 Basics of Scientific Researches 2

Heat-Extraction and Heat Networks 1,5 Mathematical Methods of Optimization 3

Automated Systems of Heat Power Processes Control 4,5 Labour Protection in the Branch 1

Gas Turbine and Steam Gas Units 4,5 Operation Modes and Exploitation of Heat Power Plants 4,5

Exploitation of Power Equipment 3 Projecting of Heat and Atomic Power Plants 3

Diagnostics of Heat Power Equipment for Heat and Atomic Power Plants 2

Assembling and Repair of Heat Power Plants 3

Ecology of Electric Power Plants 2,5 Computer-Aided Design of Heat Power Plants 2

Energy-Saving Technologies of Heat Power Plants 1,5

Elective Courses Intellectual Property 1 Computer Graphics** 3,67 Computer Graphics** 3,83


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Science of Patent and Copyright 2 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Heat-Exchange in Power Plants 2 Special Issues of Heat Power Plants 2 Basics of Society's Sustainable Development 8,5 Preparation of Graduation Thesis 25,5

Total 46,5 Total


___________________________________________________________________________ www.kpi.ua 297

Speciality: Thermophysics


First Year


Foreign Language-1 2 Foreign Language-1 2 Philosophy-2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Higher Mathematics 1. Linear Algebra. Differential Equations 7

Higher Mathematics 2. Integral Calculus. Differential Equations. 5

General Physics 1. Mechanics. Molecular Physics 5

General Physics 2. Oscillations and Waves. Electricity and Magnetics 5

Engineering and Computer Graphics 1. Engineering Graphics 5 Chemistry 4 Information Technology-1. Basics of Computer Science and Programming 4

Engineering and Computer Graphics-2. Technical Drawing and Computer Graphics 2

Material Science and Technology of Materials 4,5

Information Technologies-2. Automation of Graphical Information Processing 3

Mathematical Methods and Models. 3

Theoretical Mechanics. 4,5 Elective Courses

Higher Mathematics-1а 1 Total 30 Total 31,5

Second Year


Foreign Language 2 2 Foreign Language 2 2

Philosophy 1 2,5

Technical Mechanics-2. Construction of Apparatus, Machines and Mechanisms 4

Higher Mathematics 3. Numerical and Functional Rows. Multiple, Curvilinear and Surface Integrals 5 Ecology 2


Technical Thermodynamics-2.Thermodynamic Processes and Cycles 5

Hydrogasdynamics. 6

Heat Mass Transfer-1. Heat Conductivity and Convection Heat Transfer 7

Technical Thermodynamics-1. Laws of Thermodynamics. Properties of Working Bodies (Gases Liquids) 4

Heat and Technical Measurement and Equipments-1. Metrology and Standardization 3

Basics of Electric Engineering and Electronics 4,5

Elective Courses Higher Mathematics-2а 5 Mathematical Physics 3,5

Total 30 Total 31,5


___________________________________________________________________________ 298 GENERAL CATALOG 2009-2010

Third Year

First Semester Second Semester Foreign Language Credit Course Title Credit

Foreign Language 2 Foreign Language 2 Economic Theory 2 Sociology 1,5 Heat Mass Transfer 5 Industrial Practical Training 4,5

Life Safety and Labour Protection 3,5 Basics of Scientific Researches and Experimental Planning-2 2

Basics of Scientific Researches and Experimental Planning-1. 4

Physical and Chemical Basics of Heat Processes 3

Heat Power Measurement and Equipments 2

Research Methods of Heat Exchange Processes 2 5

Research Methods of Heat Exchange Processes 1 6 Industrial Electronics 4

Steam and Gas Turbines 3 Technical Means of Heat and Physical Experiment 4

Boundary-Layer Theory 3 Heat Transfer Apparatus and Heat Carriers 5

Elective Courses Mathematical Design 3

Total 30,5 Total 34

Fourth Year


Science of Law 2 Economics of Power Engineering 1,5 Political Science 1,5 Nuclear Power Supplys 2 Labour Protection 1,5 Nuclear and Heat Power Plants 2,5 Research Methods of Heat Exchange Processes 4,5

Computer Modelling of Thermophysical Processes 2,39

Heat Hydraulic Processes in Steam Generating Units 3

Heat Exchange Apparatus and Heat Carriers 0,5

Computer Modelling of Thermophysical Processes 2,11


Heat Exchange Apparatus and Heat Carriers 3 Preparation of Thesis 1,5 Foreign Language of the Professional Direction 2,11

Elective Courses Heat Mass Transfer 4,5 Modern Computer Technologies 3 Basics of Scientific Researches and Experimental Planning 2,11

Basics of Scientific Researches and Experimental Planning 3,5

Basics of Scientific Researches and Experimental Planning. 1,89



___________________________________________________________________________ www.kpi.ua 299

Degree Structure for Specialist of Thermophysics

Fifth Year



Economics of Power Engineering, Organization and Planning of Production 2 Management in Energy Technology 1,5 Marketing 2 Foreign Language 0,94 Foreign Language 1,06 Labour Protection in the Branch 1,5

Intellectual Property 1 Basics of Scientific Researches and Experimental Planning 2,67


Turbulance and its Research Methods 3,5

Non-Traditional Methods of Energy Getting 2

Temperature Modes and Refrigerating (Radioelectronic Facilities) 3

Research Methods of Matter Thermal and Physical Properties 3,06

Research Methods of Matter Thermal and Physical Properties 2,94

Computer Design Systems 3 Basics of Computational Thermophysics 3

Computer Modelling of Thermophysical Processes 3

Elective Courses

Scientific Researches and Computer Processing 2,06

Scientific Research and Computer Processing 1,44

Theory and History of World Culture 3




Sixth Year




Total 33 Total


___________________________________________________________________________ 300 GENERAL CATALOG 2009-2010

Degree Structure for Master of Thermophysics

Fifth Year



Marketing 2 Pedagogics of Higher School 1,5

Economics of Power Engineering, Organization and Planning of Production 2 Management in Energy Technology 1,5 Foreign Language 1,06 Foreign Language 0,89




Research of Matter Thermophysical Properties 3,56 Labour Protection in the Branch 1,5

Non-Traditional Methods of Energy Getting 2

Research of Matter Thermophysical Properties 3,44

Computer Design Systems 3 Basics of Computational Thermophysics 3

Temperature Modes and Refrigerating (Radioelectronic Devices) 3

Turbulance and its Research Methods 4

Heat Pumps 2 Elective Courses

Theory and History of World Culture 3

Scientific Researches and Experimental Planning 2,5





___________________________________________________________________________ www.kpi.ua 301

Sixth Year




Preparation of Master's Pregraduation Thesis 24

Foreign Language 1,06 Science of Patent and Copyright 2


Mathematical Modelling of Systems and Processes 3 Theory of Scientific Experiment 1,5

Methods and Means of Computer Modelling in Thermal Physics 3,5

Basics of Thermomolecular Heat Power and Technology 2 Scientific Research on Subject of Master's Pregraduation Thesis Project 7,5

Elective Courses



Total 30,75 Total 24


___________________________________________________________________________ 302 GENERAL CATALOG 2009-2010

Speciality: Atomic Power Engineering

Degree Structure for Bachelor of Atomic Power Engineering

First Year


Foreign Language-1 2 Foreign Language-1 2 History of Ukraine 1,5 Ukrainian Language 1 Philosophy-2 (Ethics and Aesthetics, Science of Religion, Logic) 1 Science of Culture 1 Higher Mathematics 1. Linear Algebra. Differential Equations 7




Engineering and Computer Graphics1. Technical Drawing 5 Chemistry 4 Information Technologies-1. Basics of Computer Science 4



Information Technologies-2. Basics of Programming 3

Mathematical Methods and Models 3 Theoretical Mechanics 4 Introduction to Speciality 1,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language-2 2 Foreign Language-2 2

Philosophy-1 2,5


Higher Mathematics 3. Numerical and Functional Rows. Multiple, Curvilinear and Surface Integrals 5 Ecology 2


Technical Thermodynamics-2. Thermodynamic Processes and Cycles 5

Hydrogasdynamics 6

Heat and Mass Transfer-1. Heat Conductivity and Convection Heat Transfer 5,5

Technical Thermodynamics-1. Laws of Thermodynamics. Properties of Working Bodies (Gases Liquids) 4 Higher Mathematics 4 4 Basics of Electrical Engineering and Electronics 4 Quantum Physics 4,5

Atomic Physics 3

Heat and Technical Measurement and Equipments 1. Metrology and Standardization 2

Total 32,5 Total 30


___________________________________________________________________________ www.kpi.ua 303

Third Year


Foreign Language-3 2 Foreign Language-3 2 Economic Theory 2 Psychology 1,5 Heat and Mass Transfer-2. Heat Transfer at Phase Transformations. Radiation 5 Sociology 1,5 Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5 Heat and Technical Measurement and Equipments-2. Heat Control Devices and Systems 2 Technologies of Heat-Transfers 4

Nuclear and Neutron Physics 4,5 Dosimetry and Irradiation Protection 4,5

Constructional Materials in Power Machine Engineering 3

Pumping and Additional Equipments of Atomic Power Stations 5

Power Nuclear Reactors 3,5

Theory of Nuclear Reactors-1. Diffusion and Moderation of Neutrons 6

Elective Courses Higher Mathematics-4 3 Atomic and Heat Power Plants 3

Turbines of Atomic Power Plants 3 Dosimetry and Irradiation Protection** 0,5

Total 28 Total 36




Political Science 1,5 Economics of Power Engineering 1,5 Foreign Language of the Professional Direction 2,11 Atomic and Heat Power Plants 3

Labour Protection 1,5 Transient and Nuclear Steam Supply Operation 6

Theory of Nuclear Reactor 5 Energetic Nuclear Reactors 2,67 Energetic Nuclear Reactors 3,33 Preparation of Thesis 4 Steam Generator and Heat-Exchange of Atomic Power Plants 4 Thermal Hydraulic Processes in Steam Generating Units 3,5

Elective Courses Constructional Materials in Power Machine Engineering 2,06

Constructional Materials in Power Machine Engineering 1,94

Dosimetry and Irradiation Protection** 2,5

Dosimetry and Irradiation Protection** 1,5

Total 25 Total 25


___________________________________________________________________________ 304 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Atomic Power Engineering

Fifth Year



Marketing 2 Foreign Language 0,94 Foreign Language 1,06 Management in Energy Technology 1,5 Intellectual Property 1 Labour Protection in the Branch 2

Economics of Power Engineering, Organization and Planning of Production 2

Safety Risk Assessment and Reliability Methods for Nuclear Power Plants 3,17


Nuclear Power Plants Accidents and Safety Systems 4

Pumping and Additional Equipments of Nuclear Steam Generator Plants 4

Deactivation, Repair, Mounting and Dismissal from Operation of Nuclear Power Plants 4

Exploitation of Nuclear Steam Supply 3

Exploitation and Diagnostics of Steam Turbine Installations of Nuclear Power Plants 4

Nuclear Physical Diagnostics Methods of Nuclear Power Plants Reactors 4


Elective Courses

Theory and Systems of Automated Control for Nuclear Power Plants* 3

Control and Regulation of Steam Turbine Plants of Nuclear Power Plants* 4 Theory and History of World Culture 1,5


Sixth Year



Total 34 Total


___________________________________________________________________________ www.kpi.ua 305

Degree Structure for Master of Atomic Power Engineering

Fifth Year


Marketing 2 Pedagogics of Higher School 1,5 Economics of Power Engineering, Organization and Planning of Production 2 Foreign Language 0,89 Foreign Language 1,06 Management in Energy Technology 1,5 Intellectual Property 1 Labour Protection in the Branch 2 Safety Risk Assessment and Reliability Methods for Nuclear Power Plants 3,83 Basics of Scientific Researches 2 Pumping and Additional Equipments of Nuclear Steam Generator Plants 4,5




Nuclear Power Plants Accidents and Safety Systems 4

Deactivation, Repair, Mounting and Dismissal from Operation of Nuclear Power Plants 4,5

Exploitation and Diagnostics of Steam Turbine Installations of Nuclear Power Plants 4

Nuclear Physical Diagnostics Methods of Nuclear Power Plants Reactors 4


Elective Courses Theory and Systems of Automated Control for Nuclear Power Plants 3 Control and Regulation of Steam Turbine Plants of Nuclear Power Plants 4 Theory and History of World Culture 2



___________________________________________________________________________ 306 GENERAL CATALOG 2009-2010

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5 Foreign Language 1,06


Basics of Society's Sustainable Development 2 Science of Patent and Copyright 2

Scientific Research on Pregraduation Thesis Subject 12



___________________________________________________________________________ www.kpi.ua 307

Speciality: Boilers and Reactors

Degree Structure for Bachelor of Power and Mechanical Engineering

First Year


Foreign Language 2 Foreign Language 2 History of Ukraine 1,5 Ukrainian Language 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Science of Culture 1 Higher Mathematics 1.Linear Algebra. Differential Equations 7

Higher Mathematics-2. Integral Calculus. Differential Equations 5

Physics 1. Mechanics. Molecular Physics 5

Physics 2. Oscillations and Waves. Electricity and Magnetics 5

Engineering and Computer Graphics-1. Engineering Graphics 5 Chemistry 4 Information Technologies-1. Basics of Computer Science and Programming 4

Engineering and Computer Graphics 2. Technical Drawing and Computer Graphics 2,5


Information Technologies-2. Automation of Graphical Information Processing 2,5

Mathematical Methods and Models 3 Theoretical Mechanics 5,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2 Higher Mathematics-3. Numerical and Functional Rows. Multiple, Curvilinear and Surface Integrals 5


Mathematical Methods and Models-2 2,5 Technical Thermodynamics-2 6 Technical Mechanics-1. Strength of Materials 5 Heat Mass Transfer-1 6,5 Hydrogasdynamics 6 Technical Thermodynamics-1 4 Electrical Engineering and Electrical Machines 4

Elective Courses Higher Mathematics-4 5

Basics of Systems Computer-Aided Design Systems 2

Total 31 Total 30,5


___________________________________________________________________________ 308 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5

Heat Mass Transfer 3 Heat Transfer in Gas Tract of Steam Boilers 5,5

Steam Boilers-1 6 Steam Boilers-2 7 Combustion Processes and Equipments 2 Environment Protection 3

Heat Power Measurement and Equipments 2

Water Preparation and Water Regime in Steam Generating Supplies 5

Steam and Gas Turbines 6 Elective Courses

Boiler Sets of Industrial Enterprises 4 Automated Regulation 4 Modern Computer Technologies in Boiler-Construction 2 Basics of Scientific Researches 3


Fourth Year


Science of Law 2 Steam Boilers 2,89

Political Science 1,5 Constructional Materials in Power Machine Engineering 1,94

Labour Protection 1,5 Automated Regulation of Boilers 3 Steam Boilers 3,11 Nuclear Power Supplies 1,5 Heat Transfer in Gas Tract of Steam Boilers 2 Nuclear and Heat Power Plants 2,5 Constructional Materials in Power Machine Engineering 2,06 Technology of Boiler-Construction 2,5 Thermal Hydraulic Processes in Steam Generating Units 3 Economics of Power Engineering 1,5 Steam Generators and Heat-Exchanges of Nuclear Power Plants 4,5


Foreign Language of the Professional Direction 2,11 Preparation of Thesis 4

Elective Courses Steam Boilers 1,56 Steam Boilers 0,94 Heat Transfer in Gas Tract of Steam Boilers 3

Modern Computer Technologies in Boiler-Construction 3,5



___________________________________________________________________________ www.kpi.ua 309

Degree Structure for Specialist of Boilers and Reactors

Fifth Year


Marketing 2 Management in Energy Technology 1,5 Foreign Language-2 1,06 Foreign Language-2 0,94 Intellectual Property 1 Labour Protection in the Branch 1,5 Economics of Power Engineering, Organization and Planning of Production 2


Non-Traditional Methods of Energy Getting 2 Setting of Steam Boilers 2 Diagnostics and Reliability of Steam Boilers, Analytical Research of Temperature Modes 6 Energy Saving and Heat Utilization 3 Auxiliary Equipment of Steam Generating Units 3,5

Special Course in Issues of Electric Power Equipments Strength 3

Operation of Steam Generating Units 2,5

Assembling and Repair of Steam Boilers 3,5

Elective Courses Heat Hydraulic Processes in Steam Generating Units 4

Methods of Steam Generating Experimental Researches 3,5

Theory and History of World Culture 1,5 Systems of Computer-Aided Design in Steam Generating Units* 2 Special Course in Boilers* 3,5


Sixth Year


Pregraduation Practical Training 12 Pregraduation Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ 310 GENERAL CATALOG 2009-2010

Degree Structure for Master of Boilers and Reactors


Course Title Credit Course Title Credit Marketing 2 Pedagogics of Higher School 1,5 Foreign Language 1,06 Management in Energy Technology 1,5 Intellectual Property 1 Foreign Language 0,89 Economics of Power Engineering, Organization and Planning of Production 2 Basics of Scientific Researches 2,5 Non-Traditional Methods of Energy Getting 2


Diagnostics and Reliability of Steam Boilers 6 Labour Protection in the Branch 1,5 Auxiliary Equipments of Steam Generating Units 3 Setting of Steam Boilers 2 Energy Saving and Heat Utilization 3

Special Course in Issues of Electric Power Equipments Strength 3

Operation of Steam Generating Units 2,5

Assembling and Repair of Steam Boilers 3,5

Elective Courses Theory and History of World Culture 1,5

Methods of Steam Generating Experimental Researches 3,5

Heat Hydraulic Processes in Steam Generating Units 4 Systems of Computer-Aided Design in Steam Generating Units* 2 Special Course of Boilers* 3,5


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5 Foreign Language 1,06 Science of Patent and Copyright 2,5 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Special Matters of Heat and Mass Transfer and Heat Hydraulic Processes 2,5 Problems of Hardness and Reliability 2,5 Scientific Research on Pregraduation Thesis Subject 10



___________________________________________________________________________ www.kpi.ua 311

Speciality: Automated Control of Technological

Processes


First Year


Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics 1. Linear Algebra. Differential Equations 7




Engineering and Computer Graphics 1 3 Chemistry 4 Material Science and Materials Treatment 2

Engineering and Computer Graphics-2 3

Programming-1. Procedural Programming 7 Theoretical Mechanics-1. Statics 3

Programming-2. Object Programming 6

Total 30,5 Total 31


Course Title Credit Course Title Credit Philosophy 1 2,5 Foreign Language 2

Foreign Language 2 Higher Mathematics 4. Operational Calculations 5

Higher Mathematics-3. Theory of Rows 4

Numerical Methods-2. Complex Use of Numerical Methods 3

Theoretical Mechanics-2. Dynamics 3 Ecology 2 Numerical Methods-1. Basic Numerical Methods 3

Computer Technologies-1. Data Bases 4

Programming-3. Programming in Windows Environment 5

Applied Mechanics and Basics of Design-2 2


Heat Engineering and Hydrogasdynamics-2. Heat Engineering and Hydraulics 6

Heat Engineering and Hydrogasdynamics-1. Basics of Heat Engineering 5 Electrical Engineering-1 5

Elective Courses

Applied Software 3 Basics of Heat Power and Nuclear Power Plants 2

Total 30,5 Total 31


___________________________________________________________________________ 312 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Theory of Automatical Control-1. Theory of Non-Interruprive Control 7 Foreign Language 2 Technological Measurements and Devices-1. Temperatures Control 4

Theory of Automatical Control-2. Theory of Digital Control 6


Technological Measurements and Devices-2. Control of Thermophysical Value 5,5

Computer Technologies-2. Design Tools of Control Systems 2

Technical Means of Automation-1. Analogue Automation Means 5

Electrical Engineering-2 3 Identification and Modelling of Technological Processes-1 3



Technological Objects of Management 2 Industrial Practical Training 4,5

Optimization of Control Systems-1. Optimization of Constant Modes 4

Elective Courses Basics of Heat Power and Nuclear Power Plants 1

Total 30,5 Total 36



Science of Law 2 Modelling and Optimization of Control Systems 2,94

Political Science 1,5 Basics of Technological Processes Automatization 5

Technical Means of Automation 3 Computer Application in Systems of Technological Processes Control 1,5

Identification and Modelling of Control Systems 3,5

Economics of Power Engineering, Organization and Planning of Production 0,94

Design of Automatization Systems 2,5 Foreign Language of the Professional Direction 2,06

Modelling and Optimization of Control Systems 3,06 Preparation of Thesis 1,5 Economics of Power Engineering, Organization and Planning of Production 1,56 Labour Protection 1,5 Foreign Language of the Professional Direction 1,94

Elective Courses Steam and Gas Turbines 2 Nuclear Power Supplies 1,5

Modern Computer Technologies** 2,06 Basics of Control Systems Programming 3

"Apparatus Supplying for Computer Systems"** 2

Basics of Computer-Aided Design Systems 1,5

Modern Computer Technologies** 2,44 Total 26,62 Total 22,38


___________________________________________________________________________ www.kpi.ua 313

Degree Structure for Specialist of Automated Control of Technological

Processes

Fifth Year



Marketing 2 Project Management 2 Foreign Language 1,06 Foreign Language 0,94

Program and Technical Complexes of Automatization Means 3,28 Labour Protection in the Branch 1

Modern Chapters of Control Theory 3,56

Program and Technical Complexes of Automatization Means 1,72

Automation of Technological Processes and Productions 5,06


Control Systems Programming 3 Automation of Technological Processes and Productions 4,44

Intellectual Property 1 Automation and Power Saving 3 Heat Power Plants 3

Elective Courses

Modern Programming Tools 4 Computer Design in Control Systems 3

Modern Computer Technologies** 4 "Design of Complex Technical Systems in Power Engineering"** 3,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 314 GENERAL CATALOG 2009-2010

Degree Structure for Master of Automated Control of Technological

Processes


Course Title Credit Course Title Credit Marketing 2 Project Management 2 Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1 Program and Technical Complexes of Automatization Means 3,28 Basics of Scientific Researches 2 Modern Chapters of Control Theory 3,5



Modern Chapters of Control Theory 3

Control Systems Programming 3 Automation of Technological Processes and Productions 4,44

Automation and Power Saving 3 Heat Power Plants 3 Labour Protection in the Branch 1

Elective Courses

Modern Programming Tools 4,5 Computer Design in Control Systems 3



Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Foreign Language 1 Mathematical Modelling of Systems and Processes 3 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Control Theory. Chosen Chapters 3 Chosen Issues in Technical Cybernetics 2,5 Modern Programming Technologies 4 Scientific Research on Subject 6

Total 25 Total 25,5


___________________________________________________________________________ www.kpi.ua 315

Speciality: Computer-Integrated Technological

Processes and Plants


First Year


Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics 1. Linear Algebra. Differential Equations 7

Higher Mathematics-2. Integral Calculus. 5

General Physics 1.Mechanics. Molecular Physics 7

Physics 2. Oscillations, Waves, Electromagnetism 6

Engineering and Computer Graphics-1 3 Chemistry 4 Material Science and Materials Treatment 2

Engineering and Computer Graphics-2 3

Programming-1. Procedural Meaning 7 Theoretical Mechanics-1. Statics 3

Programming-2.Object Programming 6

Total 30,5 Total 31


Course Title Credit Course Title Credit Philosophy 1 2,5 Foreign Language 2

Foreign Language 2 Higher Mathematics-4. Operational Calculations 5

Higher Mathematics-3.Theory of Rows 4

Numerical Methods-2. Complex Use of Numerical Methods 3

Theoretical Mechanics-2. Dynamics 3 Ecology 2 Numerical Methods-1. Basic Numerical Methods 3

Computer Technologies-1. Data Bases 4

Programming-3. Programming in Windows Environment 5



Heat Engineering and Hydrogasdynamics-2. Heat Engineering and Hydraulics 6

Heat Engineering and Hydrogasdynamics-1. Basics of Heat Engineering 5 Electrical Engineering-1 5

Elective Courses

Applied Software 3 Basics of Heat Power and Nuclear Power Plants 2

Total 30,5 Total 31


___________________________________________________________________________ 316 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Theory of Automatical Control-1. Theory of Non-Interruptive Control 7 Foreign Language 2 Technological Measurements and Devices-1. Temperatures Control 4

Theory of Automatical Control-2. Theory of Digital Control 6


Technological Measurements and Devices-2. Control of Thermophysical Value 5,5

Computer Technologies-2. Design Tools of Control Systems 2

Technical Means of Automation-1. Analogue Automation Means 5

Electric Engineering-2 3 Identification and Modelling of Technological Processes-1 3



Technological Objects of Management 2 Industrial Practical Training 4,5

Optimization of Control Systems-1. Optimization of Constant Modes 4

Elective Courses Basics of Heat Power and Nuclear Power Plants 1

Total 30,5 Total 36



Science of Law 2 Modelling and Optimization of Control Systems 2,92

Political Science 1,5 Basics of Technological Processes Automatization 5

Technical Means of Automation 3 Computer Application in Systems of Technological Processes Control 1,5

Identification and Modelling of Control Systems 3,5

Economics of Power Engineering, Organization and Planning of Production 0,94

Design of Automatization Systems 2,5 Foreign Language of the Professional Direction 1,89

Modelling and Optimization of Control Systems 3,08 Graduation Thesis Projecting 1,5 Economics of Power Engineering, Organization and Planning of Production 1,56 Labour Protection 1,5 Foreign Language of the Professional Direction 2,11

Elective Courses Operational Systems and Computer Networks 2

Basics of Control Systems Programming 3,5

Modern Computer Technologies 2,58 Basics of Systems Computer Aided Design Systems 1,5

Apparatus Supplying for Computer Systems 2 Modern Computer Technologies 2,92



___________________________________________________________________________ www.kpi.ua 317

Degree Structure for Specialist of Computer-Integrated Technological


Fifth Year



Marketing 2 Project Management 2 Foreign Language 1,06 Foreign Language 0,94

Program and Technical Complexes of Automatization Means 3,25 Labour Protection in the Branch 1





Control Systems Programming 3,31 Control Systems Programming 3,69 Intellectual Property 1 Man-Machine Systems 3 Integrated Computer Technologies 3

Elective Courses

Modern Programming Tools 4 Computer Design in Control Systems 3



Sixth Year




Total 33 Total


___________________________________________________________________________ 318 GENERAL CATALOG 2009-2010

Degree Structure for Master of Computer-Integrated Technological



Course Title Credit Course Title Credit Marketing 2 Project Management 2 Foreign Language 1 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 1 Program and Technical Complexes of Automatization Means 3,28 Basics of Scientific Researches 2 Modern Chapters of Control Theory 3,5



Modern Chapters of Control Theory 3

Control Systems Programming 3 Control Systems Programming 4 Man-Machine Systems 3 Integrated Computer Technologies 3 Labour Protection in the Branch 1

Elective Courses

Modern Programming Tools 4,5 Computer Design in Control Systems 3



Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Foreign Language 1 Mathematical Modelling of Systems and Processes 3 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Control Theory. Chosen Chapters 3 Chosen Issues in Technical Cybernetics 2,5 Modern Programming Technologies 4 Scientific Research on the Subject 6

Total 25 Total 25,5


___________________________________________________________________________ www.kpi.ua 319

Speciality: Computer-Aided Technologies of Designing


First Year


Philosophy-2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language-1 2 Foreign Language-1 2 Higher Mathematics-1. Linear Algebra. Differential Equations 7


Basics of Programming and Algorithmic Languages-1. Basics of Programming 5,5



Basics of Programming and Algorithmic Languages-2. Special Means of Programming Language 6,5

Basics of Discrete Mathematics 5

System Programming and Operating Systems-1. Operating Systems 4

Computer Architecture and Сomputer Сircuit Engineering-1 4


Data Structure and Organization of Information Systems 3

Total 30 Total 31,5

Second Year


Philosophy-1 2,5 Foreign Language-2 2

Foreign Language-2 2

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 5

Higher Mathematics 3. Solving of Differential Equations 5 Ecology 2 Physics-2. Magnetism .Optics. Atomic Physics 6 Object-Oriented Programming 5,5

Object-Oriented Programming-1 2,5 Basics of Heat Engineering and Electronics 3

Numerical Methods in Informatics -1 3

Organization of Databases and Knowledge Basics 1 4

System Programming and Operational Systems-2 5


Elective Courses Construction CADs 4 Basics of Heat Engineering 4

Total 30 Total 31,5


___________________________________________________________________________ 320 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language-3 2 Sociology 1,5 Computer Networks (Local, Corporate, Global) 5 Foreign Language-3 2 Life Safety and Labour Protection 3,5 Modelling of Systems 1 3 Mathematical Methods of Operations Research 4 Artificial Intelligence Systems 5

Linguistic Support of CAD 1 4 Programming Technologies and Software Design 1 3

Software for AI 5

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 4,5

Organization of Databases and Knowledge Basics 2 5 Geometric Modelling in CAD 4 Linguistic Support of CAD 2 4

Computer Aided Design of Complicated Objects and Systems 4

Computer Networks (Local, Corporate, Global) 2 3


Fourth Year


Science of Law 2

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 2,5

Political Science 1,5 Systematic Analysis and Designing of Computer Information Systems 3,5

Foreign Language of Occupational Direction 2

Foreign Language of Occupational Direction 2

Economics and Organization of Production 3 Management 1,5 Basics of CAD for Complicated Objects and Systems 2 Basics of Heat Engineering 2,5 Programming Technologies and Software Design 3 Preparation of Thesis 1,5 Labour Protection 1,5 Geometric Modelling in CAD 3,64 Geometric Modelling in CAD 3,86

Elective Courses Multimedia Technology, Web-design 6 Geo-information Systems 5,5



___________________________________________________________________________ www.kpi.ua 321

Degree Structure for Specialist of Computer-Aided Technologies of

Designing

Fifth Year



Marketing 1,5 Foreign Language 0,97 Legal Regulation of Business Activities 1,5 CAD Information Support 3,94 Foreign Language 1,03 Construction CADs 2,94 CAD Information Support 4,06 Distributed Data Processing 3,94 Construction CADs 3,06 Labour Protection in the Branch 1 Distributed Data Processing 4,06 Visual Design in CAD 2,94

Visual Design in CAD 3,06 Basics of System Appendings Development 3

Intellectual Property 1 Modern PC Technical Means 3 Administration Systems for ОС Linux 4

Elective Courses Certification, Standardization and Legal Protection of Software Means 4 Means of Information Security 3,5


Specialization:

Complicated Heat and Technical Systems 4

Mathematical Modelling of Power Processes and Systems 3

Computer-Aided Design of Complicated Power Systems 3

Total 4 Total 6

Sixth Year




Total 33 Total


___________________________________________________________________________ 322 GENERAL CATALOG 2009-2010

Degree Structure for Master of Computer-Aided Technologies of Designing


Course Title Credit Course Title Credit Marketing 1,5 Pedagogics of Higher School 1,5 Legal Regulation of Business Activities 1,5 Foreign Language 0,89 Foreign Language 1,06 CAD Information Support 3,94 CAD Information Support 4,06 Construction CADs 2,94 Construction CADs 3,06 Distributed Data Processing 3,94 Distributed Data Processing 4,06 Labour Protection in the Branch 1 Visual Design in CAD 3,06 Visual Design in CAD 2,94


Basics of Scientific Researches 2 Elective Courses

Certification, Standardization and Legal Protection of Software Means 4 Means of Information Security 3,5

Specialization Complicated Heat and Technical Systems 4

Mathematical Modelling of Power Processes and Systems 3

Computer-Aided Design of Complicated Power Systems 3


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Thesis 25,5

Science of Patent and Copyright 2 Scientific Researches on the Subject 7,5

Foreign Language 1,06 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Object-Oriented Modelling of Program Systems 4,5



___________________________________________________________________________ www.kpi.ua 323

Speciality: Computer Ecological and Economical

Monitoring



Course Title Credit Course Title Credit History of Ukraine 1,5 Ukrainian Language 1 Philosophy-2 1 Science of Culture 1 Foreign Language-1 2 Foreign Language-1 2 Higher Mathematics-1. Linear Algebra. 7



Physics 1. Mechanics. Molecular Physics 6,5



Basics of Discrete Mathematics (Sets. Mathematical Logic) 3

Basics of Discrete Mathematics (Theory of Graphs) 3

Ecology 2 Data Structure and Organization in Programming Languages 4

Сomputer Сircuit Engineering and Computer Architecture-1 4

Сomputer Сircuit Engineering and Computer Architecture-2 3

Total 30 Total 32

Second Year


Philosophy 1 2,5 Foreign Language-1 2 Foreign Language-1 2 Object-Oriented Programming-2 4 Higher Mathematics 3. Solving of Differential Equations 5


Physics-2 5,5

System Programming and Operating Systems-2. System Programming 3

Object-Oriented Programming-1 4 Computer Networks (Local, Corporate, Global) 5




Law of Ecology and Ecological Audit 5

Elective Courses Environment Monitoring-1 3 Environment Monitoring-2 3 Ecology of Power Production 3

Total 30 Total 31


___________________________________________________________________________ 324 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language-3 2 Sociology 1,5 Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 3 Foreign Language-3 2 Organization of Databases and Knowledge Basics-1 5

Programming Technologies and Software Design 5

Life Safety and Labour Protection 3,5 Management 2 Economics and Organization of Production 3 Industrial Practical Training 4,5

Geo-information Systems-1 4,5 Organization of Databases and Knowledge Basics 2 5

Mathematical Methods of Optimization and Operations Research 5

Economical Analysis of Engineering Solutions 3

Geo-information Systems-2 4,5 Elective Courses

Environmental and Economic Optimization of Production-1 3

Environmental and Economic Optimization of Production-2 5

Total 31 Total 34

Fourth Year


Political Science 1,5 System Analysis and Designing of Computer Information Systems 2,5


Foreign Language of the Professional Direction 2,06 Artificial Intelligence Systems 2,5 Methods and Means of Computer Information Technologies 3 Graphics and Geometric Modelling 2,42 Computer-Aided Design of Complex Information Objects-1 4

Distributed Systems of Information Processing 1,5

Graphics and Geometric Modelling 2,58 Management 1,5 Geo-Information Systems 2,5 Preparation of Graduation Thesis 1,5 Economics and Organization of Production 3 Labour Protection 1,5

Elective Courses General Chemical Technology and Industrial Ecology 2,06

General Chemical Technology and Industrial Ecology 1,94

Multimedia Technologies, Web-Design 6,08

Multimedia Technologies, Web-Design 5,42



___________________________________________________________________________ www.kpi.ua 325

Degree Structure for Specialist of Computer Ecological and Economical

Monitoring

Fifth Year



Marketing 1,5 Foreign Language 0,97

Legal Regulation of Business Activities 1,5

Environmental and Economic Optimization of Production 3

Foreign Language 1,03 Monitoring and Environment Control Methods 3,5

Quality Control of Environment State 3

Apparatus and Software Tools of Ecological Information Gathering and Processing 4

Social and Economic Problems of Environment Condition Management 3

Computer Technologies at Modern Economics 3,5

Imitative Modelling of Ecological Processes 4 Distributed Databases Design 4 Global Computer Networks 4 Labour Protection in the Branch 1 Artificial Intelligence Systems 4 Renewable Power Sources 3 Intellectual Property 1



Sixth Year




Total 33 Total


___________________________________________________________________________ 326 GENERAL CATALOG 2009-2010

Degree Structure for Master of Computer Ecological and Economical

Monitoring


Course Title Credit Course Title Credit Marketing 1,5 Pedagogics of Higher School 1,5 Legal Regulation of Business Activities 1,5 Foreign Language 0,89

Foreign Language 1,06 Mathematical Methods of Optimization 3

Global Computer Networks 4 Distributed Databases Design 4

Artificial Intelligence Systems 4 Computer Technologies at Modern Economics 3,5

Imitative Modelling of Ecological Processes 4 Labour Protection in the Branch 1 Quality Control of Environment State 3

Monitoring and Environment Control Methods 3,5

Renewable Power Sources 3

Apparatus and Software Tools of Ecological Information Gathering and Processing 4

Social and Economic Problems of Environment Condition Management 3

Environmental and Economic Optimization of Production 3

Intellectual Property 1 Basics of Scientific Researches 2 Elective Courses

Certification, Standardization and Legal Protection of Software Means 4 Means of Information Security 3,5


Sixth Year



Scientific Researches on the Subject 7,5

Science of Patent and Copyright 2 Preparation of Graduation Thesis 25,5 Foreign Language 1,06 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Object-Oriented Modelling of Program Systems 4



___________________________________________________________________________ www.kpi.ua 327

Speciality: Software of Automated Systems

Degree Structure for Bachelor of Software Engineering

First Year


History of Ukraine 1,5 Ukrainian Language 1 Philosophy-2 1 Science of Culture 1 Foreign Language-1 2 Foreign Language-1 2 Higher Mathematics-1. Linear Algebra. Differential Equations 7






Basics of Discrete Mathematics 5




Structure and Organization of Data 3 Total 30 Total 31,5

Second Year



Philosophy-1 2,5

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 5

Higher Mathematics 3. Solving of Differential Equations 5 Ecology 2 Physics-2. Magnetism .Optics. Atomic Physics 6


Object-Oriented Programming-1 5 Numerical Methods in Informatics -2 5,5

Numerical Methods in Informatics -1 3,5 Functional Programming 3 System Programming and Operating Systems-2 6

Graphics and Geometric Modelling and Interactive Systems-1 3

Mathematical Methods of Optimization and Operations Research 4

Object-Oriented Programming 4 Total 30 Total 31,5


___________________________________________________________________________ 328 GENERAL CATALOG 2009-2010

Third Year


Economic Theory 2 Psychology 1,5 Foreign Language 2 Sociology 1,5 Organization of Databases and Knowledge Basics 1 6 Foreign Language 2 Computer Networks (Local, Corporate, Global) 4 Industrial Practical Training 4,5 Life Safety and Labour Protection 3,5 Logic Programming 5 Basics of Translators Development -1 4

Basics of Translators Development -2 5



Organization of Databases and Knowledge Basics-2 5

Computer Networks (Local, Corporate, Global) 2 3

Elective Courses Multimedia Technologies-1 4 Multimedia Technologies-2 3


Fourth Year


Science of Law 2 System Analysis and Designing of Computer Information Systems 2



Methods and Means of Computer Information Technologies 3

Modelling of Systems 3 Management 1,5 Computer Networks (Local, Corporate, Global) 3

Graphics and Geometric Modelling and Interactive Systems 3,14

Artificial Intelligence Systems 4 Distributed Systems of Information Processing 3

Economics and Organization of Production 3 Software for Intelligence Systems 2,5 Graphics and Geometric Modelling and Interactive Systems 2,86 Preparation of Graduation Thesis 1,5 Labour Protection 1,5

Elective Courses Multimedia Technology, Web-Design 6 Geo-information Systems 5,5



___________________________________________________________________________ www.kpi.ua 329

Degree Structure for Specialist of Software of Automated Systems

Fifth Year



Marketing 1,5 Foreign Language 0,97 Legal Regulation of Business Activities 1,5 Global Computer Networks 2,44 Foreign Language 1,03 Software for Intelligence Systems 2,44

Global Computer Networks 2,06 Modelling of Complicated Processes and Systems 3,19

Distributed Databases Design 4 Basics of System Appendings Development 2,69

Software for Intelligence Systems 2,06 Modern PC Technical Means 4

Graphics and Geometric Modelling and Interactive Systems 4

Computer Technologies in Modern Economics 2,44

Modelling of Complicated Processes and Systems 3,81 Labour Protection in the Branch 1

Basics of System Appendings Development 2,81

Computer Technologies at Modern Economics 2,06 Intellectual Property 1



Specialization: Applied Software of Internet Network 2,81

Applied Software of Internet Network 2,69

Administration Systems for ОС Linux 4


Sixth Year




Total 33 Total


___________________________________________________________________________ 330 GENERAL CATALOG 2009-2010

Degree Structure for Master of Software of Automated Systems

Fifth Year


Foreign Language 1,06 Pedagogics of Higher School 1,5 Marketing 1,5 Foreign Language 0,89 Legal Regulation of Business Activities 1,5 Global Computer Networks 2,44 Global Computer Networks 2,06 Software for Intelligence Systems 2,44

Distributed Databases Design 4 Modelling of Complicated Processes and Systems 3,19

Software for Intelligence Systems 2,06 Computer Technologies at Modern Economics 2,44

Graphics and Geometric Modelling 4 Labour Protection in the Branch 1 Modelling of Complicated Processes and Systems 3,81


Computer Technologies at Modern Economics 2,06 2 Intellectual Property 1


Specialization Applied Software of Internet Network 3,06

Applied Software of Internet Network 2,94

Administration Systems for ОС Linux 4


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Graduation Thesis 25,5 Science of Patent and Copyright 2 Foreign Language 1,06 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Object-Oriented Modelling of Program Systems 4,5 Scientific Researches on the Subject 7,5


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF ELECTRIC POWER ENGINEERING AND AUTOMATICS

___________________________________________________________________________ www.kpi.ua 331

Faculty of Electric Power Engineering

and Automatics

Faculty of Electric Power Engineering and Automatics was founded in 1918.

It is one of the oldest and largest among university faculties. More than 20 000 engineers involving prominent specialists in

the area of science, technology and industry have got good educational background at the faculty. Among them are the President of National Academy of Sciences B.E. Paton, Ukrainian Academicians A.K. Shidlovsky, I.M. Chizenko, a member of the Russian Academy of Sciences B.M. Vul and others.

Scientific activity of the faculty is concentrated on following fields:

• Fundamental research of the most important problems in natural, social and humanitarian sciences;

• The newest technologies and resources saving technologies in power engineering;

• New computer facilities and technologies of society’s information.

The graduates of the faculty will take Bachelor’s Degree (4 years of study), Specialist (5,5 years) and Master (6 years) in following fields of training: “Power engineering”, “Electrical engineering” and “Electromechanics”.

http://fea.kpi.ua


___________________________________________________________________________ 332 GENERAL CATALOG 2009-2010

Speciality: Electric Power Stations

Degree Structure for Bachelor of Electrical Engineering and Electrotechnology

First Year


Psychology 1,5 Philosophy (Ethics, Aesthetics, Logic and Religion Science) 1



Foreign Language 1 History of Ukraine 1,5 Ukrainian and Foreign Culture 1 Higher Mathematics 2 7 Higher Mathematics 1 6,5 General Physics 2 6 General Physics 1 5 Technical Mechanics 4 Computing Engineering, Algorithm Languages and Programming 6

Computing Engineering, Algorithm Languages and Programming 4

Engineering Graphics 4 Theoretical Fundamentals of Electrical Engineering 1 4

Introduction to Speciality 3

Electrical Engineering Materials. Technology of Construction Materials 2

Total 30 Total 31,5

Second Year




Science of Law 1,5 Philosophy 2,5 Higher Mathematics 3 5,5 Political Science 1,5

Ecology 2 Principles of Metrology and Electrical Measurements 5

Electrical Engineering Materials 3 Electrical Machines 3,5 Theoretical Fundamentals of Electrical Engineering 2 7 Electrical Systems and Networks 2 Mathematical Problems of Power Engineering 5

Theoretical Fundamentals of Electrical Engineering 3 6

Technology of Electric Energy Production 1 3 Industrial Electronics 3

Mathematical Problems of Power Engineering (course work) 1

Mathematical Modelling of Power Objects 5

Technology of Electric Energy Production 2 2

Total 29 Total 33,5


___________________________________________________________________________ www.kpi.ua 333

Third Year



Ukrainian Language 2 Ukrainian Language 2 Sociology 1,5 Economic Theory 2 Electrical Machines 5,5 Life Safety 3,5

Electrical Systems and Networks 4,5 Economics and Organization of Production 3

Theory of Automated Control 5 Electrical Part of Station and Substation 4,5

Fundamentals of Theory of Reliability in Electric Power 3 Industrial Practical Training 4,5

Electrical Systems and Networks (course project) 1,5

Heat Part of Electric Power Stations 6

Management of Electric Power Stations 2

Elective Courses Information Systems for The Research of Electric Power Problems 7

Control Modes of Electric Power Systems 4

Microprocessor Engineering 4

Total 28,5 Total 37

Fourth Year



Relay Protection of Electric Systems 4

Electrical Part of Station and Substation 3

Operation and Control of Power Stations Modes 5

Engineering of High Voltage 4 Foreign Language of the Professional Direction 2

Transition Processes in Power Engineering 8


Electrical Part of Station and Substation 4 Power Station Auxiliaries 3 Hydraulic Part of Power Station 5 Pregraduation Practical Training 4,5 Preparation of Bachelor’s Thesis 9

Elective Courses Operation and Control of Power Stations Modes 5

Total 31 Total 31,5


___________________________________________________________________________ 334 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electric Power Stations

Fifth Year



Marketing 2 Ukrainian Language 1 Ukrainian Language 1 Labour Protection in the Branch 2 The Heat Part of Power Stations 4 Power Station Auxiliaries 1,5

Electromechanical Transient Processes 4,5

Automated Systems of Technological Processes Control and Electrical Station Modes Optimization 4

Reliability in Electrical Power Engineering 4

Mathematical Modelling of Transient Processes 4

Automated Systems of Technological Processes Control and Electric Station Modes Optimization 3,5 Electric Station Designing 4

Diagnosis of Power Stations Equipment 3 Automation of Power Engineering 3,5 Ecology of Power Station 1 Intellectual Property 1

Elective Courses Information Systems for the Research of Electric Power Problems 3,5

Management of Electric Power Stations 1,5

Information Systems for the Research of Electric Power Problems 4


Sixth Year



Preproduction Practical Training 12

Preparation and Presentation of Graduation Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 335

Degree Structure for Master of Electric Power Stations

Fifth Year


Marketing 2 Ukrainian Language 1

Ukrainian Language 1 Philosophic Problems of Scientific Knowledge 1,5

Fundamentals of Scientific Researches 2,5

Control Modes of Electric Power Systems 2

Heat Part of Electric Power Stations 4


Electric Mechanical Transient Processes 4,5 Labour Protection in the Branch 2

Reliability in Electrical Power Engineering 4




Diagnosis of Electrical Power Stations 3 Electrical Station Designing 4 Ecology of Electrical Stations 1 Automation of Power Engineering 3,5 Intellectual Property 1

Elective Courses Information Systems for the Research of Electric Power Problems 3,5 Science of Patent and Copyright 1,5

Information Systems for the Research of Electric Power Problems 4



___________________________________________________________________________ 336 GENERAL CATALOG 2009-2010

Sixth Year


Science of Patent and Copyright 2 Preparation and Presentation of Master’s Thesis 25,5

Pedagogics of Higher School 1,5 Ukrainian Language 2

Dynamics of Electric Power Systems of Nuclear Power Plant 2



Automatic Control Frequency and Power 1,5 Individual Scientific Research 1,5

Elective Courses

Expert Systems in Electric Power System 1,5

Asynchronous Systems of Electric Power Systems 1,5 The Software for Electrical Mode Calculation 1,5 Basics of Energy Security 1,5



___________________________________________________________________________ www.kpi.ua 337

Speciality: Electrical Systems and Networks


First Year



Psychology 1,5 Philosophy-2 1 Foreign Language 2 Foreign Language 2 Business Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Higher Mathematics. Part 2 7 Higher Mathematics. Part 1 7 General Physics. Part 2 5 General Physics. Part 1 5 Technical Mechanics. Part 2 4 Computer Science and Algorithmic Languages. Part 1 5

Computer Science and Algorithmic Languages. Part 2 3

Engineering Graphics 4 Fundamental Theory of Electrical Engineering. Part 1 4


Electrotechnical Materials Technology, Technology of Engineering Materials 2


Second Year



Foreign Language 2 Philosophy-1 2,5 Law 1,5 Foreign Language 2 Higher Mathematics. Part 3 5 Political Science 1,5

Ecology 2 Basics of Metrology and Electrical Measurements 4

Electromechanical Materials 3 Electrical Machines. Part 1 4 Fundamental Theory of Electrical Engineering. Part 2 6

Electrical Systems and Networks. Part 1 2

Electrical Energy Producing Technology. Part 1 3

Electrical Energy Producing Technology. Part 2 2

Mathematical Problems of Power Engineering. Part 1 6

Mathematical Problems of Power Engineering. Part 2 3

Fundamental Theory of Electrical Engineering. Part 3 5

Industrial Electronics 3

Total 28,5 Total 29


___________________________________________________________________________ 338 GENERAL CATALOG 2009-2010

Third Year


Sociology 1,5 Economics 2 Foreign Language of the Professional Direction 2 Life Safety and Labour Protection 3,5

Electrical Machines. Part 2 4 Foreign Language of the Professional Direction 2

Electrical Systems and Networks. Part 2 7

Electrical Systems and Networks. Part 2 1,5

Automatic Control Theory 4 Electrical Part of Power Stations and Substations 4

Designing Basics of Mechanical Part for Electrical Power Transmission Lines 3


Industrial Practical Training 4,5

Transient Processes in Electrical Systems 5

Reliability and Designing of Electrical Systems 3

State Control of Electrical Systems 6 Elective Courses

Mathematical Models of Electrical Systems 7




Foreign Language of the Professional Direction 1,9 Science of Law 1,8 Electrical Systems and Networks. 7 Political Science 1,5 High Voltage Technique 3 Basics of Management 1,3 Electrical Part of Power Stations and Substations 4 Labour Protection in the Branch 1,5 Reliability and Designing of Electrical Systems 2


Decision-Making Expert Systems in Energetics 2 Electrical Systems and Networks. 4,5

Electrical Part of Power Stations and Substations 0,9

Transient Processes in Energetics 4,5

Reliability and Designing of Electrical Systems 1,8

Preparation of Bachelor's Thesis 2,5 Elective Courses

Application Routines Packages for PC 4 Microprocessor Technique 2,7

Basics of Scientific Researches 2 Application Routines Packages for PC 3,6



___________________________________________________________________________ www.kpi.ua 339

Degree Structure for Specialist of Electrical Systems and Networks

Fifth Year



Basics of Marketing 2 Foreign Language 0,9 Foreign Language 1 Labour Protection in the Branch 1,8 Electrical Systems and Networks 1 Electrical Systems and Networks 0,9

Transient Processes in Energetics 5 Relay Protection and Automation of Power Systems 2,8

Relay Protection and Automation of Power Systems 3

Automatic Control in Power Systems 2,8

Models of Power Systems Optimal Development 5

Models of Power Systems Optimal Development 2,8

Automatic Control Systems and Optimization of Power Systems Conditions 5

Automatic Control Systems and Optimization of Power Systems Conditions 3,7

Designing of Electrical Networks 3 Intellectual Property 0,9 Elective Courses

Application Routines Packages for PC 4

Special Problems of Electrical Energy Transmission 1,8

Application Routines Packages for PC 3,8

Total 29 Total 22,2

Sixth Year



Pregraduation Practical Training 12 Preparation of Specialist's Thesis 21

Total 33 Total


___________________________________________________________________________ 340 GENERAL CATALOG 2009-2010

Degree Structure for Master of Electrical Systems and Networks



Basics of Marketing 2 Philosophic Problems of Scientific Knowledge 1,5

Foreign Language 1 Foreign Language 0,9

Basics of Scientific Researches 2,2 Relay Protection and Automation of Power Systems 2,8

Transient Processes in Energetics 5 Automatic Control in Power Systems 2,8

Relay Protection and Automation of Power Systems 3 Electrical Systems and Networks 0,9

Electrical Systems and Networks 1 Models of Power Systems Optimal Development 2,8

Models of Power Systems Optimal Development 5

Automatic Control Systems and Optimization of Power Systems Conditions 3,7

Automatic Control Systems and Optimization of Power Systems Conditions 5 Labour Protection in the Branch 1,8 Designing of Electrical Networks 3 Intellectual Property 0,9

Elective Courses Application Routines Packages for PC 4

Special Problems of Electrical Energy Transmission 1,8

Application Routines Packages for PC 5,6



Course Title Credit Course Title Credit Pedagogics of Higher School, Intellectual Property 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Foreign Language 2 Mathematical Methods of Power Systems Optimization 3 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Energy Losses Saving in Power Systems 2 Optimization of Modes for Long Power Transmission Lines 1,5 Increasing of Power Systems Capacity 2,5 Control of Special Modes for Long Power Transmission Lines 1,5 Scientific Research on Chosen Subject 1,5



___________________________________________________________________________ www.kpi.ua 341

Speciality: Equipment and Electrophysics of High-Voltages

Degree Structure for Bachelor of

Electrical Engineering and Electrotechnology

First Year


Course Title Credit Course Title Credit Foreign Language 2 Philosophy-2 1 Psychology 1,5 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5 Ukrainian and Foreign Culture 1 Higher Mathematics 2 7 Higher Mathematics 1 6,5 Physics-2 6 General Physics 1 5 Technical Mechanics 4 Computing Engineering and Programming 1 6

Computing Engineering and Programming 2 4

Engineering Graphics 4 Theoretical Basics of Electrical Engineering 1 4



Total 30 Total 31,5

Second Year


Course Title Credit Course Title Credit Foreign Language 3 2 Philosophy-1 2,5 Science of Law 1,5 Foreign Language 4 2 Ecology 2 Political Science 1,5

Higher Mathematics 3 5,5 Principles of Metrology and Electrical Measurements 5

Electrical Engineering Materials 3 Electrical Machines 1 4 Theoretical Basics of Electrical Engineering 2 6 Electrical Systems and Networks 1 2 Mathematical Problems of Power Engineering 1 4,5


Microprocessor Engineering 2 Industrial Electronics 3 Technology of Electric Energy Production 1 3

Mathematical Problems of Power Engineering 2 4


Total 29,5 Total 32


___________________________________________________________________________ 342 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 5 2 Foreign Language 6 2 Sociology 1,5 Economic Theory 2 Electrical Machines 2 5 Electrical Systems and Networks 1,5 Electrical Systems and Networks 2 4,5 Engineering of High Voltage 4 High-Voltage Engineering and Electrophysics 3,5

Electrical Part of Station and Substation 4,5

Mathematical Problems of Power Engineering 2 2,5 Life Safety and Labour Protection 3,5 Methods of Calculation and Analysis of Electric Fields in High-Voltage Devices 4,5

Economics and Organization of Production

3 Electrical Apparatus 3,5 Industrial Practical Training 4,5

Methods and Technique of High-Voltage Experiment 4

Electrical Apparatus 2,5

Use of Strong Electric end Magnetic Fields in the Branch and Agriculture 2

Principles of High Voltage Insulation Designing 2,5

Elective Courses Theory of Automated Control 2

Total 29 Total 36


___________________________________________________________________________ www.kpi.ua 343

Fourth Year


Language of the Professional Direction 2 Science of Law 2 Electrical Apparatus 2 Political Science 1,5 Electrical Parts of Electrical Stations and Substations 3 Basics of Management 1,5 Restriction of Overvoltages in Electric Networks. Part 3 2,5 Life Safety and Labour Protection 1,5 Principles of High Voltage Insulation Designing 3

Language of the Professional Direction 2

Methods and Technique of High-Voltage Experiment 2

Relay Protection and Automation of Electric Systems 2,5

Restriction of Overvoltages in Electric Networks. Part 4 2,5

Principles of Insulation Designing 3

High-Voltage Electrophysical Equipment 2,5

Preparation of Bachelor’s Thesis 2,5 Elective Courses

Lightning Protection of Electric Equipment. Part 1 2

Lightning Protection of Electric Equipment. Part 2 1,5

Commutators of High-Voltage Equipment 1,5 Use of Strong Electric end Magnetic Fields in the Branch and Agriculture 3 Software for High-Voltage Technique 4

Total 25 Total 23


___________________________________________________________________________ 344 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of

Equipment and Electrophysics of High-Voltages

Fifth Year



Basics of Marketing 1,5 Foreign Language 1 Foreign Language 1 Labour Protection 2

Restriction of Overvoltages in Transmission Lines 4 Intellectual Property 1

High-Voltage Testing Units 3,5 Measurement of High Voltages and Large Currents 3

High-Voltage Power Cables 1,5 Electromagnetic Compatibility of Technical Equipment 3,5

Diagnostics of Electric Networks Insulation 3

Monitoring of Electric Equipment Insulation 4

Acceptance and Maintenance Tests of Electric Equipment. Part 1 2,5

Acceptance and Maintenance Tests of Electric Equipment. Part 2 2

Equipment and Processes of Electrophysical Technology 2

Computer Technologies in Diagnostics of Electric Equipment Insulation 2,5

Applied Ecology of HVEE 4,5 Equipment and Processes of Electrophysical Technology. Part 2 3

Elective Courses

PC Calculations of High-Voltage Technique Tasks. Part 1 4

PC Calculations of High-Voltage Technique Tasks. Part 2 3,5


Sixth Year





Total 33 Total


___________________________________________________________________________ www.kpi.ua 345

Degree Structure for Master of

Equipment and Electrophysics of High-Voltages

Fifth Year



Basics of Marketing 1,5 Philosophic Problems of Scientific Knowledge 1,5

Basics of Scientific Researches 2 Foreign Language 1

Foreign Language 1 Mathematical Modelling of Systems and Processes 3

Restriction of Overvoltages in Transmission Lines 4

Life Safety and Labor Protection in the Branch 2

High-Voltage Testing Units 3,5 Intellectual Property 1

High-Voltage Power Cables 1,5 Measurement of High-Voltage and Overcurrent 3

Diagnostics of Electric Networks Insulation 3

Electromagnetic Compatibility of Technical Equipment 3,5

Acceptance and Maintenance Tests of Electric Equipment. Part 1 2,5

Monitoring of Electric Equipment Insulation 4


Acceptance and Maintenance Tests of Electric Equipment. Part 2 2

Applied Ecology of HVEE 4,5

Computer Technologies in Diagnostics of Electric Equipment Insulation 2,5


Elective Courses PC Calculations of High-Voltage Technique Tasks. Part 1 4

PC Calculations of High-Voltage Technique Tasks. Part 2 3,5

Total 29,5 Total 30

Sixth Year



Pedagogics of Higher School 1,5 Preparation and Presentation of Master’s Thesis 25,5

Science of Patent and Copyright 2 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Individual Scientific Research 13,5

Total 22 Total 25,5


___________________________________________________________________________ 346 GENERAL CATALOG 2009-2010

Speciality: Control Systems of Production and Electrical Energy Distribution

Degree Structure for Bachelor of

Electrical Engineering and Electrotechnology



Psychology 1,5 Philosophy (Ethics, Aesthetics, Logics and Religion Science) 1

Foreign Language 2 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5 Ukrainian and Foreign Culture 1 Higher Mathematics 7 Higher Mathematics 6,5 General Physics 6

General Physics 5 Computer Engineering and Algorithmic Languages 4

Computer Engineering and Algorithmic Languages 6 Technical Mechanics 4

Engineering Graphics 4 Theoretical Fundamentals of Electrical Engineering 1 4



Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Basics of Law 1,5 Political Science 1,5 Higher Mathematics 5,5 Philosophy-1 2,5

Ecology 2 Basics of Metrology and Electrical Measurements 5

Electrical Engineering Materials 3 Electrical Machines 1 4 Theoretical Fundamentals of Electrical Engineering 2 7




Computer Engineering and Algorithmic Languages 6 Industrial Electronics 4

Elective Courses

Mathematical Tasks of Power Engineering 1 4,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 347

Third Year


Foreign Language 2 Foreign Language 2 Sociology 1,5 Economic Theory 2 Electrical Systems and Networks 1 6 Life Safety and Labour Protection 3,5 Electrical Machines 1 5 Electrical Systems and Networks 2 2 Digital Electronics in Power Engineering 1 7

Electrical Part of Station and Substation 1 4

Economics and Production of Organization 3

Industrial Practical Training 4,5

Transient Processes in Electrical Systems 6

Digital Electronics in Power Engineering 2 3

Theory of Automated Control 1 3

Relay Protection of Electrical Systems 1 2

Elective Courses Computers and Programming Language 3/1 2,5

Computers and Programming Language 1

Mathematical Problems of Power Engineering 2 5,5

Total 29,5 Total 36

Fourth Year


Ukrainian (Russian, English, German, French) Language 2

Principals and Methods of Information Transmission in Power Energy 4,5

Techniques of High Voltage 4

Development of Algorithms and Programming of Energy Tasks 2 2,5

Electrical Part of Station and Substation 2 2

Relay Protection of Electrical Systems 2/1 4

Theory of Automatic Control 5,5 Dispatching Power Systems Control 3

Development of Algorithms and Programming Tasks of Energy 5 Pregraduation Practical Training 4,5 Relay Protection of Electrical Systems 1/2 5 Preparation of Bachelor’s Thesis 9

Elective Courses Software Application for Computer 3 Basics of Scientific Researches 2,5 Computer Engineering and Algorithmic Languages 1

Total 30 Total 27,5


___________________________________________________________________________ 348 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Control Systems of Production and

Electrical Energy Distribution

Fifth Year



Marketing 2 Foreign Language 1 Foreign Language 1 Labour Protection 2

Transient Processes in Electrical Systems 4,5 Intellectual Property 1 Principals and Methods of Information Transmission in Power Energy 6

Optimization Models of Energy Systems Development 2

Relay Protection of Electrically Systems 4 Automation of Power Engineering 6,5 Dispatching Power Systems Control 2,5

Dispatching Power Systems Control 4

Programming for Microprocessor Systems 4

Design and Maintenance of Power Systems Control 3,5

Programming for Microprocessor Systems 2,5

Elective Courses

Basics of Scientific Researches 2,5 Solving of Electrical Problems with SoFT 1

Solving of Electrical Problems with SoFT 1

Non-Traditional and Renewable Energy Source 1,5

Total 27,5 Total 25

Sixth Year


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Preparation and Presentation of Graduation Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 349

Degree Structure for Master of Control Systems of Production and Electrical Energy Distribution

Fifth Year


Marketing 1,5 Philosophical Problems of Scientific Knowledge 1,5

Foreign Language 1 Foreign Language 1 Transient Processes in Electrical Systems 4,5 Life Safety and Labour Protection 2 Relay Protection of Electrical Systems 4,5 Intellectual Property 1 Principals and Methods of Information Transmission in Power Energy 6

Models of Optimal Progressing of Power Systems 2,5

Dispatching Power Systems Control 2,5

Automation of Power Engineering 6,5


Design and Maintenance of Power Systems Control 4

Dispatching Power Systems Control 4,5


Elective Courses

Basics of Scientific Researches 2 Electrical Problems Solving with SoFT 1

1 Alternative and Renewable Energy Sources 1,5

Total 27,5 Total 28

Sixth Year


Pedagogics of Higher School 1,5 Individual Scientific Research 4

Science of Patent and Copyright 2 Preparation and Presentation of Master’s Thesis 23

Foreign Language 2 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Mathematical Modelling of Electrical Systems and Processes 4 Information and Control Systems for Power 5

Methods of Information Saving in the Electric Power 5

Total 24,5 Total 27


___________________________________________________________________________ 350 GENERAL CATALOG 2009-2010

Speciality: Non-Traditional Energy Sources


First Year



Foreign Language 2 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5 Ukrainian and Foreign Culture

1 Philosophy (Ethics, Aesthetics, Logic and Religion Science) 1

Psychology 1,5 Mathematics 2 7,5 Mathematics 1 7,5 Physics 2 5

Physics 1 6 Computer Engineering and Algorithmic Languages 5


Computer Engineering and Algorithmic Languages 4

Theoretical Fundamentals of Electrical Engineering 1 5,5


Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Science of Law 1,5 Philosophy-1 2,5 Electrical Materials 3 Political Science 1,5

Theoretical Fundamentals of Electrical Engineering 2 5,5

Principles of Metrology and Electrical Measurements 5

Technology of Electric Energy Production 1 3 Electrical Systems and Networks 2 Engineering Thermodynamics 1 5 Industrial Electronics 5 Heat-and-Mass Transfer 1 4 Electrical Machines 1 4,5 Mathematics 3 4 Engineering Thermodynamics 2 2 Ecology 2 Heat-and-Mass Transfer 2 3 Hydrogasdynamics 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 351

Third Year


Sociology 1,5 Economic Theory 2 Foreign Language 2 Foreign Language 2 Electrical Machines and Apparatus 5 Electrical Systems and Networks 1 Electrical Systems and Networks 5,5 Safety of Vital Activity 3 Design Basics of Power Equipment with Renewable Energy Sources 4,5

Economics and Production of Organization 3

Heat-and-Mass Transfer 3,5 Industrial Practical Training 4,5

Low Potentional Energy Sources 3 Electrical Part of Stations and Substations 1 5

Harnessing of Solar Energy 5 Wind-Power Engineering 5,5 Low Potentional Energy Sources 4,5

Elective Courses

Mathematical Methods and Models of Electric Power Energy 2

Systems of Automatization and Control of Power Equipment 3,5

Total 30 Total 36

Fourth Year


Foreign Language 2 Relay Protection of Electric Systems 4

Conventional and Storage of Renewable Energy Sources 4

Conventional and Storage of Renewable Energy Sources 2

Theory of Automatical Control 4

Operating Conditions and Exploitation of System with Renewable Energy Sources 4

Low Potentional Energy Sources 1 Elements and Devices of Automatic Systems 2

Engineering of High Voltage 4 Diagnostics of Electrical Equipment of RES-based Systems 2,5

Reliability of System with Renewable Energy Sources Reliability 4,5 Pregraduation Practical Training 4,5 Hydropower Engineering 4,5 Preparation of Bachelor’s Thesis 9 Mathematical Methods and Models of Electric Power Energy 5

Electrical Part of Stations and Substations 1

Total 30 Total 28


___________________________________________________________________________ 352 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Non-Traditional Energy Sources

Fifth Year



Economics of Nonconventional Power Engineering 3 Foreign Language 1

Foreign Language 1

Operating Conditions and Exploitation of System with Renewable Energy Sources 4,5

Energy Saving 2 Systems of Automatization and Control of Power Units 3,5

Integrated Use of RES 3 Reliability of Electric Equipment and Systems 4,5

Operating Conditions and Exploitation of System with Renewable Energy Sources 4,5

Diagnostics of Electric Equipment with Renewable Sources of Energy 3,5

Systems of Automatization and Control of Power Units 4,5

Designing of Electric Units with Renewable Sources of Energy 3

Designing of Electric Units with Renewable Sources of Energy 3 Protection Against Job Hazards 1,5 Intellectual Property 1

Elective Courses

Promising Technologies in RES Power Engineering 3

Physics and Engineering of Nonconventional Power Sources 4,5

Basics of Marketing 1,5

Total 25,5 Total 26

Sixth Year





Total 33 Total


___________________________________________________________________________ www.kpi.ua 353

Degree Structure for Master of Non-Traditional Energy Sources

Fifth Year


Course Title Credit Course Title Credit Designing of Electric Units with Renewable Sources of Energy 4

Designing of Electric Units with Renewable Sources of Energy 3,5

Systems of Automatization and Control of Power Units 5 Intellectual Property 1


Systems of Automatization and Control of Power Units 4

Energy Saving 2 Reliability of Electric Equipment and Systems 5

Economics of Non-Traditional Power Engineering 3


Promising Technologies in RES Power Engineering 3

Physics and Engineering of Non-Traditional Power Sources 3

Basics of Marketing 2 Labour Protection in the Branch 1,5 Complex Use of Renewable Energy Sources 3



Basics of Scientific Researches 2 Diagnostics of Electric Equipment with Renewable Sources of Energy 5

Total 29 Total 30,5

Sixth Year



Pedagogics of Higher School 1,5 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Science of Patent and Copyright 3 Basics of Scientific Researches 3 Systems of Information Processing 6 Scientific Problems of Non-Traditional Power Engineering 3

Total 24,5 Total


___________________________________________________________________________ 354 GENERAL CATALOG 2009-2010

Speciality: Electromechanical Systems of Automation and Electric Drive


First Year


Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy-2 1 Psychology 1,5 Foreign Language-2 2

Foreign Language-1 2 Higher Mathematics-2. Integral Calculus 7,5

Higher Mathematics-1. Linear Algebra. Differential Equations 7,5

General Physics-2. Electromagnetism 6

General Physics-1. Mechanics. Heat 6

Technical Mechanics-1. Statics and Kinematics 2,5


Applied Mechanics-1. Strength of Materials 2,5

Computer Engineering and Programming-1. Programming Languages. 5

Computer Engineering and Programming-2. Designing Packages 2

Introduction to the Electromechanics 2

Theoretical Fundamentals of Electrical Engineering 1. Theory of Electric Circles 6,5

Total 30 Total 31,5

Second Year


Science of Law 1,5 Political Science 1,5 Foreign Language-3 2 Philosophy-1 2,5 Higher Mathematics-3. Functional Analysis 6 Foreign Language-4 2 Theoretical Mechanics-2. Dynamics 3,5 Theory of Automatic Control 7 Applied Mechanics-2. Machines Details 2,5

Electrical Machines-1. Machine of Direct Current 4

Ecology 2 Theory of Nonlinear Circles and Electromagnetic Field 5,5

Computer Engineering and Programming-3. Designing Packages 3

Electronics and Microcircuitry-1. Properties of Elements 4

Theoretical Fundamentals of Electrical Engineering-2. Three-Phase Electric Circles 5,5 Electrotechnical Materials 2

Elective Courses Technology of Constructional Materials 2

Non-Traditional and Renewable Energy Sources 2


Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 355

Third Year


Sociology 1,5 Economic Theory 2 Foreign Language-5 2 Foreign Language-6 2

Theory of Electric Drive-1 4,5 Modelling of Electromechanical Systems-1 2,5

Electrical Machines-2 3 Theory of Electric Drive-2 3,5 Elements and Apparatus of Electromechanical Systems and Electric Drives-1 6 Life Safety and Labour Protection 3,5 Nonlinear and Discrete Systems of Automated Control 6 Technological Practical Training 4,5

Electronics and Microcircuitry-2 4,5

Elements and Apparatus of Electromechanical Systems and Electric Drives-2 3

Theory of Mechatronic Systems-1 4

Automation of Electromechanical Systems-1 6

Automation of Technological Processes, Plants and Complexes-1 4

Elective Courses Computer Devices in Systems of Automation-1 2

Computer Devices in Systems of Automation-2 2

Total 29,5 Total 37


Course Title Credit Course Title Credit Modelling of Electromechanical Systems 1,83 Science of Law 2 Basics of Metrology and Electrical Measurements 3,5 Political Science 1,5

Theory of Electric Drive 5 Modelling of Electromechanical Systems 1,67

Theory of Optimal Control 2 Basics of Management 1,5 Control Systems for Electric Drives 3,72 Labour Protection 1,5 Economics and Organization of Production 3 Control Systems for Electric Drives 3,78 Foreign Language of the Professional Direction 2

Dynamics and Kinematics of Electromechatronic Systems 2,5


Preparation of Pregraduation Thesis 2 Elective Courses

Basics of Electromechatronics 2,5 Microprocessor Devices 3,5 Non-Traditional and Renewable Energy Sources 1,5

Electric Power Saving in Electromechanical Systems 1,5

Calculation of Electromechanical Systems Dynamics with Computer 1,5



___________________________________________________________________________ 356 GENERAL CATALOG 2009-2010


Electromechanical Systems of Automation and Electric Drive

Fifth Year



Foreign Language 2 Labour Protection in the Branch 1,5 Basics of Marketing 2 Designing of Automation Systems 2,69

Designing of Automation Systems 2,81 Automation of Technological Processes, Plants 4,61

Automation of Technological Processes, Plants 3,39

CAD of Electromechanical Systems of Automation and Electric Drive 2,11


Electromechanical Systems of Automation of General Industrial Mechanisms 3,28


Electromechanical Systems of Automation in Metal Processing and Machine Building 2,83

Electromechanical Systems of Automation in Metal Processing and Machine Building 3,17 Intellectual Property 1

Electromechatronic Systems of Automation 3,5

Program Control of Electromechanical Systems 2,5

Program Control of Electromechanical Systems 2

Elective Courses

Digital Signal Processors 2 Reliability of Electromechanical Systems 3


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 357

Degree Structure for Master of Electromechanical Systems of Automation and Electric Drive

Fifth Year


Basics of Marketing 2 Philosophic Problems of Scientific Knowledge 1,5

Foreign Language 2 Labour Protection in the Branch 1,5 Basics of Scientific Researches 2 Designing of Automation Systems 3,11

Designing of Automation Systems 2,89 Automation of Technological Processes, Plants 4,39

Automation of Technological Processes, Plants 3,61







Program Control of Electromechanical Systems 2,78

Electromechatronic Systems of Automation 4,5


Program Control of Electromechanical Systems 2,22 Intellectual Property 1


Sixth Year


Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5 Science of Patent and Copyright 2 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Scientific Researches on the Subject 7,5

Elective Courses Optimization of Systems with Electromechanical Objects 3 Modern Microcontroller Systems of Automation 3 Theory of Electromechanical Systems Reliability 2

Total 24 Total 25,5


___________________________________________________________________________ 358 GENERAL CATALOG 2009-2010

Speciality: Electric Machines and Devices


First Year



Ukrainian Language 1 History of Ukraine 1,5 Foreign Language 2 Philosophy 1 Psychology 1,5 Foreign Language 2 Ukrainian and Foreign Culture 1 Higher Mathematics 7,5 Higher Mathematics 7,5 General Physics 6 General Physics 6 Theoretical Mechanics 3 Computer Engineering and Programming 5


Engineering Graphics 4 Applied Mechanics 2,5

Introduction to Electromechanics 2 Theoretical Fundamentals of Electrical Engineering 6

Total 30 Total 31,5

Second Year



Foreign Language 2 Philosophy 2,5 Science of Law 1,5 Foreign Language 2 Ecology 2 Political Science 1,5

Higher Mathematics 6

Basics of Computer Technology of Electric Machines Analysis and Synthesis 3,5

Theoretical Mechanics 3 Electrical Machines 7 Computer Engineering and Programming 3

Basics of Metrology and Electromeasurements 4

Applied Mechanics 2,5 Power Transformers 3,5 Theoretical Fundamentals of Electrical Engineering 6

Theory of Nonlinear Circles and Electromagnetic Field 5,5

Electrical Engineering Materials . 2 Technology of Construction Materials 2 Elective Courses Alternative and Renewable Energy 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 359

Third Year


Sociology 1,5 Economic Theory 2 Foreign Language 2 Foreign Language 2 Basics of Computer Technology of Electric Machines Analysis and Synthesis 2,5

Mathematical Modelling of Electromechanical Systems 4

Electrical Machines 8,5 Technological Practical Training 4,5 Electronics and Microprocessor Technology 6 Theory of Electric Drive 5 Basics of Automated Projecting of Electric machines 4,5 Life Safety and Labour Protection 3,5 Production and Operation of Electrical Machines 3 Electrical Apparatus 4

Electronics and Microprocessor Technology 2,5

Theory of Automated Control 3

Electric Machines of the Automated Systems 2,5

Elective Courses

Microprocessor Devices 2 Basics of Automated Projecting of Electric Machines 3

Total 30 Total 36

Fourth Year


Theory of Automated Control 2 4 Technology of Machines Production 2

Theory of Electric Drive 2 3 Electrical Part of Station and Substation 3

Production and Operation of Electrical Machines 2 1,5

Power Supply of Industrial and Municipal Units 3

Mathematical Modelling of Electromechanical Systems 4

Production and Operation of Electrical Machines 2 3,5

Special Electrical Machines 5 Economics and Organization of Production 3

Foreign Language 2 Pregraduation Practical Training 4,5 Electrical Apparatus 2 2,5 Preparation of Bachelor’s Thesis 9 Energy-saving Electromechanical System 3

Basics of Automated Projecting of Electric machines 3

Elective Courses Basics of Electric Power Engineering 2

Total 30 Total 28


___________________________________________________________________________ 360 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electric Machines and Devices

Fifth Year



Basics of Marketing 2 Intellectual Property 1

Foreign Language 2 Basics of Automated Projecting of Electromechanical Systems 4

Special Electric Machines 4,5 Special Electric Machines of Systems for Automatics 3,5

Special Electric Machines of Systems for Automatics 4

Assembling and Adjustment of Electromechanical Devices 4

Basics of Electromechanotronics 3 Power Supply of Industrial and Municipal Units 3

Production Electromechanical Complex 3

Basics of Electrical Power Engineering 3

Control Systems of Electric Drives 3 Engineering of High Voltage 3

Electrical Part of Station and Substation 3 Labour Protection in the Branch 1,5

Elective Courses

Basics of Evolutional Synthesis of Electromechanical Systems 2

Vibrations and Noises of Electrical Machines 3

Total 26,5 Total 26

Specialization:

Reliability and Diagnostics of Electric Equipment 3

Resource- and Power-Saving at Exploitation of Industrial Electromechanical Complexes 3

Automation of Control and Certification of Electrical Machines 3

Total 3 Total 6

Sixth Year



Pregraduation Practical Training 12 Preparation of Pregraduation Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 361

Degree Structure for Master of Electric Machines and Devices



Basics of Scientific Researches 2 Philosophic Problems of Scientific Knowledge 1,5

Basics of Marketing 2 Intellectual Property 1

Foreign Language 2 Mathematical Modelling of Systems and Processes 3

Special Electrical Machines 4,5 Basics of Automated Projecting of Electromechanical Systems 4

Electrical Machines of Automatic Systems 4

Electrical Machines of Automatic Systems 3,5

Basics of Electric Mechanotronics 3 Assembling and Adjustment of Electromechanical Devices 4

Industrial Electromechanical Complex 3

Power Supply of Industrial and Municipal Units 3

Electric Drives Control Systems 3 Basics of Electrical Power Engineering 3

Electrical Part of Station and Substation 3 Engineering of High Voltage 3 Labour Protection in the Branch 1,5

Elective Courses Evolutionary Synthesis Basics for Electromechanical Systems 2,5

Vibrations and Noises of Electrical Machines 3,5

Total 29 Total 31

Specialization:

Reliability and Diagnostics of Electrical Equipment 3

Resource- and Power-Saving at Exploitation of Industrial Electromechanical Complexes 3

Automation of Control and Certification of Electrical Machines 3

Total 3 Total 6

Sixth Year


Pedagogics of Higher School 1,5 Preparation and Presentation of Master’s Thesis 25,5

Science of Patent and Copyright 2 Technical Electrodynamics 4 Basics of Electromechanical Systems Theory 4 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Individual Scientific Research 4,5

Total 21 Total 25,5

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF INFORMATICS AND COMPUTER ENGINEERING

___________________________________________________________________________ www.kpi.ua 363

Faculty of Informatics and Computer Engineering

Faculty of Informatics and Computer Engineering was founded in 1967. The Faculty has 3 graduating departments where 106 competent teachers are working, among them there are 15 doctors and 58 PhDs.

The Faculty provides the training on the fundamental level of specialists in the field of development, manufacturing and exploitation of program and technical means of computer and computerized systems, and also launching of modern information technologies of general and target use in different fields of science and industry with development of computer and corporative networks with corresponding software.

The long-term agreement was signed with representative company regarding establishing of the first training and research laboratory of “Microsoft” technologies in NTUU “KPI” on the basis of the Faculty.

The scientific potential of the Faculty is basically concentrated on two scientific and research institutes: “System Technologies” and “Information Processes”.

http://kpi.ua/fiot/


___________________________________________________________________________ 364 GENERAL CATALOG 2009-2010

Speciality: Information Control Systems and

Technologies


First Year



Foreign Language 2 Foreign Language 2 Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1

Analytic Geometry and Linear Algebra 4

Mathematical Analysis-2. Integral Equations of Function with many Variables. Elements of Field Theory 8

Mathematical Analysis-1. Differential and Integral Equations of One-Variable Function 7,5

Physics-1. Mechanics. Electromagnetism 6


Basics of Discrete Mathematics-2. Mathematical Logic and Graph Theory 6

Basics of Discrete Mathematics-1. Elements of Set Theory and Logical Functions 5 Ecology 2 Basics of Programming and Algorithm Languages-1. Procedure-oriented Programming PASCAL 4

Basics of Programming and Algorithm Languages-2. Procedure-oriented Programming С++ 5,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 365

Second Year




Philosophy 1 2,5

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics-2. Random and Contiguous Processes 6

Mathematical Analysis-3.Rows. Elements of Function of Complex Variable Theory 7

Object-Oriented Programming-2. Windows-Applications Development on the basis of MFC. 6

Physics-2. Electrical and Magnetic Vibrations and Waves. Quantum Physics 5

Basics of Electrical Engineering and Electronics 5,5

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics-1. Theory of Probabilities and Mathematical Statistics 6

Computer Circuit Engineering-1. Circuit Engineering of Computer Element Base 2

Object-Oriented Programming-1. Object-Oriented Programming in С++ Language 5,5 Numerical Methods 4

Elective Courses

Networks and Flows 2 Statistical Methods, Theory of Flows, Events 1

Functional and Oval Analysis 3

Additional Chapters of Numerical Analysis 2

Total 30 Total 31,5


___________________________________________________________________________ 366 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2

Computer Circuit Engineering-2. Circuit Engineering of Computer Units 4

Programming Technologies and Software Design 6

Organization of Data- and Knowledgebases-1. Knowledge Processing 4,5 Industrial Practical Training 4,5

Mathematical Methods of Operations Research-1. Linear and Nonlinear Programming 6

Organization of Data- and Knowledgebases-2. Knowledge Processing 4,5

Theory of Algorithms and Mathematical Basics of Knowledge Representation-1. Mathematical Basics of Knowledge Representation 4

Computer Architecture-1. Basics of Computer Construction and Functioning 3,5

Mathematical Methods of Operations Research-2. Discrete and Stochastic Programming 7

Theory of Algorithms and Mathematical Basics of Knowledge Representation-2. Theory of Algorithms 3

Elective Courses

Computer Technologies for Statistical Information Processing 1

Theory of Recognition and Classification in Artificial Intellect Systems-1. Recognition 1,5

Special Aspects of Mathematical Logic and Algebraic Structures 1,5

Modern Methods for Solution of Discrete Programming Tasks 1

Component Programming and Separated Systems 1 Computer Design 1

Total 30,5 Total 36


___________________________________________________________________________ www.kpi.ua 367

Fourth Year



Science of Law 2 System Analysis and Design of Computer Information Systems 2,61

Political Science 1,5 Programming Technology and Software Design 2,64

System Analysis and Design of Computer Information Systems 1,89

System Programming and Operating Systems 3,5

Computers Architecture 4,5 Methods and Means of Computer Information Technologies 3,5

Programming Technology and Software Design 1,86 Modelling of Systems 2,67



Management 1,5 Modern Theory of Control 3 Modelling of Systems 2,83 Labour Protection 1,5


Elective Courses



Computational Linguistics 4,5 Military Science 0



___________________________________________________________________________ 368 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Information Control Systems and

Technologies

Fifth Year



Marketing 1,5 Foreign Language 0,97 Foreign Language 1,03 Intellectual Property 1 Theory of Decisions Making Support 3,5 Scheduling Theory 1,5

Design of Control Informational Technologies for Computerized Integrated Enterprises 4,5 Mathematical Economics 3

Control Design of Automated Systems for Continuous Technological Processes 4,5

Control Design of Automated Systems for Continuous Technological Processes 0

Organization of Informational and Calculated Processes and Systems 2 Information Security 3

Informational Technologies in Market Infrastructure 4 Computer Networks 3

Artificial Intellect and Neuron Networks 2,42


Labour Protection in the Branch 1 Reliability of Computer System Functioning 4,5

Elective Courses

Project Management 3,5 Informational Bank and Manufacturing Systems 2,5

Total Automation of Enterprise on the Basis of Integrated System “IT-Enterprise” 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 369

Degree Structure for Master of Information Control Systems and Technologies

Fifth Year


Foreign Language 1,03 Philosophic Problems of Scientific Knowledge 1,5

Marketing 1,5 Foreign Language 1 Theory of Decisions Making Support 3,5 Intellectual Property 1 Design of Control Informational Technologies for Computerized Integrated Enterprises 4,5 Scheduling Theory 1,5 Control Design of Automated Systems for Continuous Technological Processes 4,5 Mathematical Economics 3

Organization of Informational and Calculated Processes and Systems 2

Control Design of Automated Systems for Continuous Technological Processes 0

Informational Technologies in Market Infrastructure 4


Artificial Intellect and Neuron Networks 2,42 Information Security 3 Labour Protection in the Branch 1 Computer Networks 3

Reliability of Computer System Functioning 4,5

Elective Courses

Project Management 3,5 Informational Bank and Manufacturing Systems 2,5

Total Automation of Enterprise on the Basis of Integrated System “IT-Enterprise” 1,5



Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Scientific Research on Subject 6 Foreign Language 1,97 Preparation of Thesis 25,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Effective Precise Algorithms for NP-Class Combined Tasks 3 Mathematical Basics of CASE-Technologies 2,5 Simulation and Forecasting of Business Processes 3 High-Speed Technology of Computer Networks 2,5 Imitational Projects 3



___________________________________________________________________________ 370 GENERAL CATALOG 2009-2010

Speciality: Systems of Control and Automatics

Degree Structure for Bachelor of System Engineering

First Year



Foreign Language 2 Foreign Language 2 History of Ukraine 1,5 Ukrainian Language 1

Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Science of Culture 1

Higher Mathematics-1. Linear Algebra. Analytic Geometry 6

Higher Mathematics-2. Differential and Integral Calculus 6

Special Chapters of Mathematics-1. Discrete Mathematics 4,5 Physics-1. Mechanics 4


Special Chapters of Mathematics-2. Numerical Methods 5

Engineering and Computer Graphics-1. Basics of Computer Graphics 2


Programming-1. Algorithm Programming 6

Programming-2. Object-Oriented Programming 5,5

Electronics and Micro Circuit Engineering 0 Ecology 2

Basics of Metrology 3 Operating Systems-2. OS Administration 2

Operating Systems-1. Structure and Functioning of OS 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 371

Second Year



Philosophy 2 Foreign Language 2

Foreign Language 2,5

Higher Mathematics-4. Theory of Probabilities and Mathematical Statistics 3

Higher Mathematics-3. Rows. Operational Calculus 4

Computer Electronics-1. Theory of Electric and Magnetic Circuits 4

Physics-2. Electromagnetism 5 Computer Networks 3

Special Chapters of Mathematics-3. Analytical Dynamics. 2,5 Control Systems for Databases 3

Programming-3. Systems Programming 3

Basics of System Engineering-2. Execution Units 3,5

Architecture of Computer Systems 3

Modern Programming Technologies-1. Conceptual Design and Automation of Programming 4

Basics of System Engineering-1. Enhancers 4,5

Mathematical Programming and Operations Research 3

Theory of Information and Coding 3 Elective Courses

Programming in Net Environment 3,5 Сomputer-Aided Manufacturing 3

Total 30 Total 31,5


___________________________________________________________________________ 372 GENERAL CATALOG 2009-2010

Third Year






Computer Electronics-2. Electronics and Micro Circuit Engineering 4

Computer Electronics-3. Micro-processor Systems 3

Theory of Automated Control-1. Basics of Automated Control Theory 4

Theory of Automated Control-2. Theory of Digital Control Systems 4

Basics of Information Processes Theory-1. Basics of Information Gathering, Transmission and Processing 3

Theory of Systems and System Analysis 3

Modern Programming Technologies-2. Design Technologies and Implementation of Program Systems 4 Industrial Practical Training 4,5

Modelling of Processes and Systems 4

Basics of Information Processes Theory-2. Basics of Information Transmission Systems Design 5

Design of Automation and Control Devices and Systems-1. Design of Automation and Control Devices 5

Elective Courses

WEB Technologies and Design 4 Computer Research Methods of Automatic Control System 3,5

Computer Cryptography 3

Total 30,5 Total 36


___________________________________________________________________________ www.kpi.ua 373

Fourth Year




Political Science 1,5 Theory of Automated Control 1


Systems Analysis of Objects and Computerization Processes 1,5

Basics of Management 1,5 Systems and Networks of Data Transmission 3

Foreign Language of the Professional Direction 2 Microprocessor Devices 4 Labour Protection 1,5 Reliability and Diagnostics 2,5

Basics of Information Processes Theory 1 Basics of Scientific Researches 2 Theory of Automated Control 4 Preparation of Thesis 1,5

Systems and Networks of Data Transmission 2,5 Modern Programming Technologies 2 Microprocessor Devices Reliability and Diagnostics 2

Elective Courses

Technologies and Hardware for Computer Networks 2,5

Information Security and Computer Cryptography 3

Identification and Classification in Control 3

Technologies and Hardware for Computer Networks 2,5



___________________________________________________________________________ 374 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Systems of Control and Automatics


Course Title Credit Course Title Credit Foreign Language 1 Foreign Language 1 Basics of Marketing 1,5 Intellectual Property 1

Labour Protection 1 Web Technologies in Management and Design 2

Computer Modelling of Processes and Systems 3

Telecommunication Systems and Networks 2

Design and Programming of Microprocessor Systems 3,5 Digital Systems 2 Web Technologies in Management and Design 3

Technologies of Artificial Intellect in Control 3

Telecommunication Systems and Networks 2,5

Design of Computerized Control Systems 5

Digital Systems 2,5 Optimal and Adaptive Systems 4 Technologies of Artificial Intellect in Control 2

Bank and Specialized Information Systems and Networks 2

Design of Computerized Control Systems 3

Elective Courses

Management of Computerization Projects 2,5

Economic Analysis of Design Decisions Efficiency in Management Systems 2

Access Products of Wireless Connection 1,5 Geoinformation Systems 1,5

Total 27 Total 25,5 Specialization:

Control in Telecommunication Systems* 3

Design of Telecommunication Networks and Data Transmission Systems* 5

Design of Telecommunication Networks and Data Transmission Systems* 3

Total 6 Total 5 Specialization: Integrate Corporative Information Management Systems* 3

Design and Simulation of Computer Networks* 5

Design and Simulation of Computer Networks* 3

Total 6 Total 5


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Preparation of Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 375

Degree Structure for Master of Systems of Control and Automatics


Course Title Credit Course Title Credit Foreign Language 1 Foreign Language 1 Basics of Marketing 1,5 Intellectual Property 1

Labour Protection 1 Philosophic Problems of Scientific Knowledge 1,5

Computer Modelling of Processes and Systems 3

Web Technologies in Management and Design 2

Design and Programming of Microprocessor Systems 3,5

Telecommunication Systems and Networks 2

Web Technologies in Management and Design 3 Digital Systems 2 Telecommunication Systems and Networks 2,5

Technologies of Artificial Intellect in Control 3

Digital Systems 2,5 Design of Computerized Control Systems 5

Technologies of Artificial Intellect in Control 2 Optimal and Adaptive Systems 4 Design of Computerized Control Systems 3

Bank and Specialized Information Systems and Networks 2

Elective Courses Control of Information Processes 3

Total 26 Total 23,5

Sixth Year


Foreign Language 1 Preparation of Thesis 25,5 Pedagogics of Higher School 1,5 Science of Patent and Copyright 2 Basics of Sustainable Development 2 Modern Theory of Automated Control 4 Means and Methods for Efficiency Increasing of Information Transmission and Processing 3 Modern Microcomputers 3 Reliability and Security of Information and Information Management Systems 3 Scientific Researches on the Subject 9

Elective Courses Tools for Information Displaying 2 Systems for Distributed and Parallel Computing 2,5

Total 33 Total 25,5


___________________________________________________________________________ 376 GENERAL CATALOG 2009-2010

Speciality: Flexible Computerized Systems and Robotics

Degree Structure for Bachelor of System Engineering

First Year




Philosophy-2. Science of Religion, Logic, Ethics and Aesthetics 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1

Higher Mathematics-1. Linear Algebra. Analytic Geometry 6 Ecology 2


Higher Mathematics-2. Differential and Integral Equations 6

Engineering and Computer Graphics-1. Descriptive Geometry. Basics of Computer Graphics 2 Physics-1. Mechanics 3,5

Engineering and Computer Graphics-1. Descriptive Geometry Basics of Computer Graphics 2

Special Chapters of Mathematics-2. Numerical Methods 5

Programming-1. Algorithmic Programming 5,5

Engineering and Computer Graphics-2. Descriptive Geometry. Basics of Computer Graphics 3

Basics of Metrology 3 Programming-2. Object-Oriented Programming 6,5

Operating Systems-1. for Personal Computers 2

Operating Systems-2. for Computer Networks 2

Total 30 Total 32


___________________________________________________________________________ www.kpi.ua 377

Second Year




Philosophy 1 2,5 Computer Electronics-1. Theory of Electric and Magnetic Circuits 4

Higher Mathematics-3. Rows. Operational Equations 4,5 Computer Networks 3

Higher Mathematics-4. Theory of Probabilities and Mathematical Statistics 4 Control Systems for Databases 3

Physics-2. Electromagnetism 5

Flexible Computerized Systems-1. Designing of Flexible Computerized Systems' Components 5

Special Chapters of Mathematics-3. Analytical Dynamics 3

Technologies of Software Development-1. Design Methodology of Software 3

Programming-3. System Programming 3 Theory of Information and Coding 3

Architecture of Computer Systems 3 Systems of Signals and Images Processing 4

Operations Research 3 Sensor-based Systems 3 Elective Courses

Design of Translators for Control and Automation Specialized Languages 2

Total 30 Total 32

Elective Courses:

Block 2. Theory of Distributed and Information Systems 2

Total Total 2


___________________________________________________________________________ 378 GENERAL CATALOG 2009-2010

Third Year



Foreign Language-1 2 Foreign Language-1 2 Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Computer Electronics-2. Electronics and Micro Circuit Engineering 3,5

Computer Electronics-3. Micro-processor Systems 3

Theory of Automated Control 4,5 Theory of Systems and System Analysis 3

Flexible Computerized Systems-2. Design of Flexible Computerized Systems 4 Industrial Practical Training 4,5

Technologies of Software Development-2. Visual Programming 3

Flexible Computerized Systems-3. Algorithmization and Verification Control in Flexible Computerized Systems 6

Computer Modelling of Systems 4 Technologies of Software Development-3. Web Technologies 4,5

Corporative Information Systems and Technologies* 4,5

Elective Courses

Block 1. Modern Microsoft Software 4

Block 1. Systems of Mathematical Calculations (MatLAB, MathCAD) 5


Elective Courses:

Block 2. Modern Information Technologies 4

Block 2. Office Information Technologies 5

Total 4 Total 5


___________________________________________________________________________ www.kpi.ua 379

Fourth Year



Science of Law 2 Foreign Language of the Professional Direction 2

Political Science 1,5 Theory of Automated Control 4

Labour Protection 1,5 Computerized Design of User Interfaces 2

Management 1,5 Design of Flexible Integrated Systems 4

Foreign Language of the Professional Direction 1,5 Econometrics for Computers 2,5

Economics and Organization of Production 2,5 1,5 Theory of Automated Control 3,5 Preparation of Thesis

Computerized Design of User Interfaces 2,5

Design of Flexible Computerized Systems Components 2,5

Elective Courses

Diagnostics of Systems and Theory of Reliability* 4

Automated Systems for Scientific Researches 4

Corporative Information Systems and Technologies* 4

Programming for WEB 4

Total 23 Total 28


___________________________________________________________________________ 380 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Flexible Computerized Systems and Robotics

Fifth Year


Foreign Language 0,5 Intellectual Property 1 Labour Protection in the Branch 1 Foreign Language 1,5 Marketing 1,5 Modern Theory of Control 3

Modern Theory of Control 3,5 Algorithmization and Verification in Flexible Computerized Systems 3,5

Computerized Control in Flexible Systems 3 Sensor-based Systems 3 Algorithmization and Verification in Flexible Computerized Systems 2,5

Computer and Communication Systems and Networks 3

Image Processing and Pattern Recognition 3

Information Security in Computer Systems 3

Artificial Intellect for Flexible Computerized Enterprise Planning 4

Computer-Aided Design/Computer-Aided Modelling Systems in Flexible Computerized Products 2

Methods of Expert Estimations in Computer Systems for Decision-Making 2,5

Computer-Aided Systems of Computerized Flexible Preproductions 2


Elective Courses Computer Real-time Application 1,5 Computer Real-time Application 2 Design of Translators for Control and Automation Specialized Languages 3 Systemology and Metasystems 1


Modern Operation Systems 2 Information Natural Language Technologies 3,5

Theory of Internet Networks 2 Total 4 Total 3,5

Specialization: Intellect Dataware 3,5 Identification Theory 2 Computer Intellectual Training Systems 2,5

Computer Intellectual Training Systems 2

Total 6 Total 4


Course Title Credit Course Title Credit Pregraduation Practical Training 12 Preparation of Graduation Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 381

Degree Structure for Master of Flexible Computerized Systems and

Robotics

Fifth Year




Labour Protection 1 Foreign Language 1 Marketing 1,5 Intellectual Property 1 Modern Theory of Control 3,5 Modern Theory of Control 3

Computerized Control in Flexible Systems 3

Algorithmization and Verification in Flexible Computerized Systems 3,5

Algorithmization and Verification in Flexible Computerized Systems 2,5 Sensor-based Systems 3

Image Processing and Pattern Recognition 3

Computer and Communication Systems and Networks 3

Artificial Intellect for Flexible Computerized Enterprise Planning 4

Information Security in Computer Systems 3


Computer-Aided Design/Computer-Aided Modelling Systems in Flexible Computerized Products 2

Computer Aided Systems of Computerized Flexible Preproductions 2


Elective Courses

Modern Operation Systems 2 Information Natural Language Technologies 3

Theory of Internet Networks 2,5



___________________________________________________________________________ 382 GENERAL CATALOG 2009-2010

Sixth Year



Pedagogics of Higher School 1,5 Preparation of Thesis 25,5 Foreign Language 2 Science of Patent and Copyright 2


Basics of Evolutionary Simulation Theory 1,5

Theory of Complex Aggregated Systems 1,5

Neural Networks and Neural Computer Systems 1,5

Fuzzy-set Theory in Control Models and Artificial Intellect 1,5

Forming Methods for Structural and Layout Decisions in Flexible Computer Systems 2

Self-organizing Methods in Forecasting Models of Integrated Systems 2 Physical Simulation and Experiment Planning in Integrated Systems 2

Situational Control Models for Organizational Systems 2 Scientific Research on Chosen Subject 6



___________________________________________________________________________ www.kpi.ua 383

Speciality: Computer Systems and Networks

Degree Structure for Bachelor of Computer Engineering

First Year


Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 1 2 Foreign Language 2 2 Higher Mathematics-1. Linear Algebra. Analytic Geometry 5


Higher Mathematics-1. Differential Equations 7

Physics-1. Mechanics. Electromagnetism 5

Computer Logic 1. Computer Logic 5 Discrete Mathematics 4 Programming-1. Structural Programming 8

Computer Logic 2. Computer Arithmetics 4

Computer and Engineering Graphics 1. Engineering Graphics 1,5 Ecology 2

Programming-2. Object-Oriented Programming 5

Total 31 Total 31

Second Year


Foreign Language 3 2 Foreign Language 4 2

Philosophy 1 2,5

Theory of Electrical Rings and Signals-2. Nonsine Signals. Transient Processes 3

Higher Mathematics-3. Differential Equations 4

Algorithms and Calculation Methods 3

Physics-2. Vibrations. Optics and Quantum Physics 5 Computer Electronics 6 Theory of Electrical Rings and Signals-1. Permanent and Sinusoidal Signals 4,5

Computer Architecture-1. Arithmetic and Control Units 6

Theory of Probabilities 3 Computer and Engineering Graphics-2. Computer Graphics 3

Software Engineering 1. Component Programming 3

Software Engineering 2. Basics of Software Design 4

Organization of Databases 4 System Programming-1. Programming in Assembler 4

Elective Courses Basics of Computer-Aided Design 2

Total 28 Total 33 Elective Courses: Basics of Computer-Aided Design 2

Total Total 2


___________________________________________________________________________ 384 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 5 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Computer Architecture-1. Processors 2 Foreign Language 6 2

Life Safety and Labour Protection 3,5 Computer Architecture-3. Microprocessor Means 4

System Programming-2. System Programs Development 5,5

Operating Systems-1. Organization of Computing Processes 5

Computer Modelling 5 Computer Networks-1. Local Computer Networks 7

Computer Circuit Engineering 4 Industrial Practical Training 4,5 Parallel and Distributed Computing-1. Basics of Parallel Programming 3,22

Parallel and Distributed Computing-2. Basics of Distributed Computations 2,78

Peripherals 4 Elective Courses

Hybrid Computer Systems-1. Hybrid Operational Units 1,5

Hybrid Computer Systems-2. Hybrid Processors 2,5

Theory of Experiments Planning 2,5 Total 31,22 Total 34,78

Elective Courses: Combined Computer Systems-1. Combined Operational Units 1,5

Combined Computer Systems-2. Combined Processors 2,5

Methods of Scientific Researches 2,5 Total 4 Total 2,5

Fourth Year


Science of Law 2 Computer-Aided Design of Computer Systems 2,83

Political Science 2 Computer Networks 3,31

System Software 4 Information Security in Computer Systems 3

Computer-Aided Design of Computer Systems 3,17


Computer Systems 4,5 Preparation of Thesis 1,5 Computer Networks 1,69 Economics and Organization of Production 2 Foreign Language of the Professional Direction 2 Management 1,5 Labour Protection in the Branch 1,5

Elective Courses Object-Oriented Programming 4 Real Time Systems 2,5 Logical Programming 3,5 Reliability of Computer Systems 3



___________________________________________________________________________ www.kpi.ua 385

Degree Structure for Specialist of Computer Systems and Networks

Fifth Year



Design of Computer Systems 3,56 Design of Computer Systems 3,94 Software of Computer Systems 3,83 Software of Computer Systems 3,67

Technologies of Distributed Computing 3,83


Design of Computer Networks 4,5 Design of Intellectual Systems 3,69 Design of Intellectual Systems 3,81 Network Information Technologies 4,08 Network Information Technologies 3,42 Foreign Language 6 2 Marketing 1,5 Intellectual Property 1 Labour Protection in the Branch 1

Elective Courses Information and Computing Systems 4 Computer-Aided Design Systems 3,5


Specialization:

Technology of System Programming 4

Technology of Applied Programming 3,5

Total Total 7,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 386 GENERAL CATALOG 2009-2010

Degree Structure for Master of Computer Systems and Networks

Fifth Year



Research and Design of Computer Systems 4,19


Software of Computer Systems 3,89 Foreign Language 1


Research and Design of Computer Systems 3,81

Research and Design of Computer Networks 5 Software of Computer Systems 3,61

Research of Intellectual Systems 3,89 Technologies of Distributed Computing 3,67

Network Information Technologies 3,72 Research of Intellectual Systems 4,11 Marketing 1,5 Network Information Technologies 3,78 Labour Protection in the Branch 1 Design of Complex Systems 3 Intellectual Property 1

Elective Courses Information and Computing Systems 4 Computer-Aided Design Systems 3,5


Sixth Year



Pedagogics of Higher School 1,5 Preparation of Attestation Project 25 Science of Patent and Copyright 2 Scientific Research on a Subject 7 Foreign Language 2

Basics of Society's Sustainable Development 2 Global Computer Networks 8

Total 15,5 Total 32

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” INTERCOLLEGIATE FACULTY OF MEDICAL ENGINEERING

___________________________________________________________________________ www.kpi.ua 387

Intercollegiate Faculty of Medical

Engineering

Intercollegiate Faculty of Medical Engineering was founded in 2002 on the basis of agreement between National Medical University named after O.O. Bogomolets and NTUU “KPI”.

The graduates of the faculty are trained to work at the theoretical and clinical departments of higher education institutions of Ministry of Public Health of Ukraine, in scientific and research institutes, state institutions of health protection (hospitals, diagnostic centers), in private diagnostic centers and hospitals, in pharmaceutical companies of Ukraine, in shared diagnostic institutions of Ukraine and leading countries of the world.

The graduates of the Faculty are having positions as scientific associate of computational systems, programming engineer, engineer in computer software, analyst of computer systems, system administrator, administrator of data bases, computer communications, applied programmer, system programmer, and computer engineer.

http://mmif.kpi.ua/


___________________________________________________________________________ 388 GENERAL CATALOG 2009-2010

Speciality: Information Control Systems and

Technologies


First Year



Foreign Language-1 2 Foreign Language-1 2 Philosophy-2 (Ethics and Aesthetics, Science of Religion, Logics) 1 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Analytical Geometry 4 Mathematical Analysis 2. Integrals 5,5

Mathematical Analysis 1. Differential Equations 4,5

Engineering and Computer Graphics 2. Engineering Graphics 2

Engineering and Computer Graphics 1. Descriptive Geometry 5 Physics 1. Kinematics 5 Basics of Discrete Mathematics 5 Medical Terminology and Latin 3

General Human Anatomy, Physiology and Pathology 4

Elective Courses General Chemistry 2 Basics of Organic Chemistry 2

Basics of Programming and Algorithmic Languages-1. Fundamental Static Objects of Data-1 5

Basics of Programming and Algorithmic Languages-2. Dynamic Objects of Data 6

Total 30 Total 31,5

Elective Courses:

Chemistry 4 Organic Chemistry 3

Basics of Programming and Algorithmic Languages-1. Fundamental Static Objects of Data 3

Basics of Programming and Algorithmic Languages-2. Dynamic Objects of Data 5

Total 7 Total 8


___________________________________________________________________________ www.kpi.ua 389

Second Year


Foreign Language-2 2 Foreign Language-2 2 Philosophy-1 2,5 Ecology 2

Mathematical Analysis 3. Differential Equations. Rows 5

Mathematical Analysis 4. Theory of Complex Variable. Operational Calculus 4

Physics-2. Magnetism and Atomic Physics 5,5

Object-Oriented Programming-2. Java Programming Language 4,5

Object-Oriented Programming-1. Programming Language С++. 3

Basics of Electric Engineering and Electronics-2. Basics of Electronics 4

Basics of Electric Engineering and Electronics 1. Basics of Electric Engineering 5 Numerical Methods 3


Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 2. Random Processes 3

Bioinformatics 3 Organization of Databases and Knowledge-1 4

Theory of Probabilities, Probabilistic Processes and Mathematical Statistics 1. Theory of Probabilities and Mathematical Statistics 3 Biomedical Mechanics 5

Total 30 Total 31,5


___________________________________________________________________________ 390 GENERAL CATALOG 2009-2010

Third Year


Foreign Language-3. 2 Foreign Language-3 2 Economic Theory 2 Psychology 1,5 Computer Circuit Engineering-1. Elemental Base of Computer Circuit Engineering 3 Sociology 1,5

Theory of Signals-1. Methods of Signals Transformation 3

Computer Circuit Engineering-2. Functional Assemblies of Circuit Engineering 5

Organization of Databases and Knowledge 3,5

System Analysis and Designing of Information Systems 1. Theoretical Basics 3,5

Medical Physics 3,5 Computers Architecture-1 3 Medical Engineering 4 Technological Practical Training-1 4,5

Pathological Physiology 2 Theory of Signals-2. Medical Imaging 4

Morphometrical Analysis 3

Informatics of Physiological Systems 4

Mathematical Modelling of Systems-1. Statistical Modelling. 2

Mathematical Modelling of Systems 1. Statistical Modelling 2

Specialization Diagnostics of Human Pathology 6

Total 29 Total 36

Specialization:

Modern Methods and Means of Human Pathology Diagnostics 6 Technological Practical Training-2 4,5

Total 6 Total 4,5


___________________________________________________________________________ www.kpi.ua 391

Fourth Year


Science of Law 2 Foreign Language of Professional Direction 1,5

Political Science 1,5 Programming Technologies and Making of Program Materials 4,5

Management 1,5

System Analysis and Designing of Information Systems-1. Theoretical Basics 3

Labour Protection 1,5 System Programming and Operating Systems 3,5

Foreign Language of Professional Direction 2 Preparation of Diploma Project 1,5

Computers Architecture-2 4

Mathematical Modelling of Systems-2. Computer Modelling with Deterministic Models 1

System Analysis and Designing of Information Systems 1. Theoretical Basics 4

Mathematical Modelling of Systems-2. Computer Modelling with Deterministic Models 2

Medical Engineering 4,5 Mathematical Modelling of Systems 1. Statistical Modelling 2,5 Mathematical Modelling of Systems-1. Statistical Modelling 3

Elective Courses Expert Systems in Medicine 3 Basics of Synergetics 3

Standards of Laboratory Researches 2,5



___________________________________________________________________________ 392 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Information Control Systems and

Technologies

Fifth Year



Marketing 1,5 Foreign Language 1 Foreign Language 1 Intellectual Property 1

Labour Protection in the Branch 1 Information Technologies in Telemedicine 5,5

Information Technologies in Telemedicine 5 Biomedical Cybernetics 6,5 Biomedical Cybernetics 8,5 Special Databases 1,5

Special Databases 3 Medical Software and Hardware Complexes 4

Medical Software and Hardware Complexes 3,5

Elective Courses Biorhythmology 2 Biorhythmology 3 Artificial Intelligence 2 Artificial Intelligence. 2,5

Total 27,5 Total 25

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 393

Degree Structure for Master of Information Control Systems and Technologies

Fifth Year



Foreign Language 1 Foreign Language 1 Marketing 1,5 Intellectual Property 1


Information Technologies in Telemedicine 5 Science of Patent and Copyright 2

Biomedical Cybernetics 7 Mathematical Modelling of Systems and Processes 3

Labour Protection in the Branch 1 Information Technologies in Telemedicine 5

Informatics of Medical Robotics and Nanotechnologies 4 Biomedical Cybernetics. 6 Scientific Researches on Subject 3

Elective Courses Biorhythmology 2 Biorhythmology 2 Artificial Intelligence 2 Artificial Intelligence 2,5

Total 25,5 Total 27

Sixth Year



Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5


Information Technologies in Telemedicine 3,5 Biomedical Cybernetics. 4


Medical Software and Hardware Complexes 5 Medical Information Systems 6

Elective Courses Biorhythmology 2 Artificial Intelligence 2

Total 29 Total 25,5


___________________________________________________________________________ 394 GENERAL CATALOG 2009-2010

Speciality: Medical Devices and Systems

Degree Structure for Bachelor of Instrument Engineering

First Year


Foreign Language-1. 2 Foreign Language-1 2 History of Ukraine 1,5 Ukrainian Language 1 Philosophy-2 (Ethics and Aesthetics, Science of Religion, Logics) 1 Science of Culture 1 Analytical Geometry 4 Mathematical Analysis-2. Integrals 5,5 Mathematical Analysis-1. Differential Equations 4,5

Engineering and Computer Graphics 2. Engineering Graphics 2

Engineering and Computer Graphics 1. Descriptive Geometry 4,5

Basics of Programming and Algorithmic Languages-2. Fundamental Static Objects of Data 4,5

Basics of Discrete Mathematics 5 Physics 1. Kinematics 4,5 Basics of Programming and Algorithmic Languages-1. Fundamental Static Objects of Data 3,5

Theoretical Mechanics-2. Kinematics and Introduction to Kinetics 3

Chemistry 4 Organic Chemistry 3

General Human Anatomy, Physiology and Pathology 5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 395

Second Year


Foreign Language-2 2 Foreign Language-2 2 Philosophy-1 2,5 Ecology 2

Mathematical Analysis-3. Differential Equations. Rows 5

Mathematical Analysis-4. Theory of Complex Variable. Operational Equations 4

Physics 2. Magnetism and Atomic Physics 5,5 Applied Mechanics 3 Theoretical Mechanics-2. Kinematics and Introduction to Kinetics 3

Metrology and Interchangeability-1. Technical Measurements, Fits and Limits 3

Electrical Engineering-1. Linear Rings of Constant and Alternating Voltage 3,5

Electrical Engineering-2. Three-phase Linear and Non-linear Rings 4

Basics of Devices' Elements Designing 6 Numerical Methods 3

Technology of Devices Engineering-1. Preproduction Planning 3

Basics of Biomedical Engineering-1. Control and Support of Human Body Homeostasis 3

Elective Courses Basics of Computer Technologies-1 3 Basics of Computer Technologies-2 4

Total 30,5 Total 31

Third Year First Semester Second Semester

Course Title Credit Course Title Credit Foreign Language-3 2 Foreign Language-3 2 Economic Theory 2 Psychology 1,5 Metrology and Interchangeability 2 Sociology 1,5 Labour Protection in the Branch 3,5 Theory of Automatic Control 3 Technology of Devices Engineering 5

Equipment and Instrument for Tool Elements Producing 3

Electronics 3,5 Computer Architecture (Microprocessors on Computer) 3

Biomedical Mechanics 3,5 Technological Practical Training 4,5 Modern Methods and Means of Human Pathology Diagnostics 5 Biophysics 4 Biochemistry. 4

Computer Mathematical Modelling-2. Computer Modelling with Deterministic Models 1,78


Сomputer Сircuitry 6 Elective Courses

Basics of Biomedical Engineering-2 4

Total 30,5 Total 36


___________________________________________________________________________ 396 GENERAL CATALOG 2009-2010

Fourth Year


Science of Law 2 Foreign Language of Professional Direction 2

Political Science 1,5 Computer Architecture (Microprocessors on Computer) 2

Management 1,5 Construction, Repair and Testing of Devices 2

Labour Protection 1,5 Preparation of Diploma Project 1,5



Computer Architecture (Microprocessors on Computer) 3


Construction, Repair and Testing of Devices 3

Unified System of Technological Papers 2


Measurement Devices of Human Physiological Parameters 2

Computer Mathematical Modelling-2. Computer Modelling with Deterministic Models 1,69 Optical and Quantal Medical Tools 3,5 Instrument for Surgery and Orthopedy 4 Modern Methods and Means of Human Pathology Diagnostics 4,5

Elective Courses

Biomaterials Science 4 Standards of Laboratory Researches 2

Total 30 Total 20


___________________________________________________________________________ www.kpi.ua 397

Degree Structure for Specialist of Medical Devices and Systems

Fifth Year



Marketing 1,5 Foreign Language 1 Foreign Language 1 Intellectual Property 1 Labour Protection in the Branch 1 Medical Microprocessor Systems 3

Physical Basics of Microprocessor Systems Reliability 4 Diagnostics of Human Pathology 3

Manufacturing Technology of Medical Equipment 4,5 Acoustic Medical Devices 3 Medical Microprocessor Systems 3 Methods and Tools of Introscopy 3,5

Nanotechnologies in Medical Instrument Producing 3,5 Basics of Telemedicine 3

Devices for Electrophysiological Examinations and Impulsive Stimulation of Organs 3,5

Devices for Replacement and Maintenance of Vital Body Functions 4,5

Elective Courses

Biomedical Technologies. 3

Technologies of Extracorporal Blood Circulation and Artificial Pulmonary Ventilation 3

Hygiene and Dosimetric Control of Medical Institutions 2,5

Total 27,5 Total 25

Sixth Year




Total 33 Total


___________________________________________________________________________ 398 GENERAL CATALOG 2009-2010

Degree Structure for Master of Medical Devices and Systems


Course Title Credit Course Title Credit Basics of Scientific Researches 2 Foreign Language 1 Marketing 1,5 Intellectual Property 1 Foreign Language 1 Science of Patent and Copyright 2

Labour Protection in the Branch 1 Philosophic Problems of Scientific Knowledge 1,5

Physical Basics of Microprocessor Systems Reliability 4 Medical Microprocessor Systems 3 Manufacturing Technology of Medical Equipment 4,5 Diagnostics of Human Pathology 3 Nanotechnologies in Medical Instrument Producing 3,5 Acoustic Medical Devices 3 Devices for Electrophysiological Examinations and Impulsive Stimulation of Organs 3,5 Basics of Telemedicine 3

Medical Microprocessor Systems 3

Devices for Replacement and Maintenance of Vital Body Functions 4,5


Elective Courses Hygiene and Dosimetric Control of Medical Institutions 2,5

Total 26,5 Total 25


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5 Mathematical Methods of Optimization 3 Biomedical Technologies 3 Methods and Tools of Introscopy 5 Cryogenic Medical Equipment 3 Basics of Society's Sustainable Development 2 Scientific Researches on Subject 4,5

Elective Courses Biocompatible Materials with Specified Features 3 Technologies of Extracorporal Blood Circulation and Artificial Pulmonary Ventilation 3

Total 28 Total 25,5


___________________________________________________________________________ www.kpi.ua 399

Speciality: Physical Education

Degree Structure for Specialist of Physical Education

Fifth Year



Psychology and Sports Psychomotor System 3 Pregraduation Practical Training 4,5 Theory and Methodology of Invasport 3 Preparation of Thesis 22,5

Health-Improving Technologies in System of Treatment-and-Prevention Measures 3

Basics of Scientific Methodological Activity in Physical Education and Sport 3 Anthropotechnics of Healthy Lifestyle 2 Valeo-practical Technologies 3 Intellectual Property 1 Labour Protection in the Branch 1 Modern Training Equipment in Health-Improving Physical Education 3

*Theory and Methodology of Health-Improving Swimming 2

Elective Courses

Success Methodology in Sports Career 1,5 Human Biology 3

Total 28,5 Total 27

Elective Courses:

Basics of Sports Double-events' Methodology 1,5

*Theory and Methodology of Recreation Games 3

Total 4,5 Total


___________________________________________________________________________ 400 GENERAL CATALOG 2009-2010

Speciality: Physical Rehabilitation

Degree Structure for Bachelor of Human Health

First Year




Human Anatomy and Sport Morphology 3

Philosophy (Ethics and Aesthetics, Science of Religion, Logics) 1,5

Biochemistry and Sports Biochemistry 4 Science of Culture 1

Basics of Valeology 4 Human Anatomy and Sport Morphology 3

Introduction to Speciality 4 Biology of Human Development 3

History of Physical Culture, Olympic and Professional Sport 3

History of Physical Culture, Olympic and Professional Sport 4

Basics of Recreational Track and Field Athletics 2,5

Physical and Sport Constructions and Sports Metrology 2,5

*Organization and Methodology of Recreative and Health-Improving Work and Tourism 3

Physical and Sport Constructions and Sports Metrology 1,5

Improvement of Sportsmanship from Chosen Kind of Sport 1

*Theory and Methodology of Health-Improving Gymnastics 1,5

*Theory and Methodology of Swimming and Diving 2

*Theory and Methodology of Health-Improving Gymnastics 1,5

*Elements of Sport Games in Rehabilitation 3

Basics of Recreational Track and Field Athletics 2,5






___________________________________________________________________________ www.kpi.ua 401

Second Year



Foreign Language 4 Foreign Language 0 Human and Sports Physiology 4 Philosophy 3 Ecology 2 Human and Sports Physiology 2 Basics of Hygiene and Medical Knowledge 3

Sports Medicine and Medical Health Care 2

Elements of Sport Games in Rehabilitation 2 Sport Biomechanics 3 Theory and Methodology of Athleticism and Fight 3

Basics of Hygiene and Medical Knowledge 2

Theory and Methodology of Physical Education 2

Theory and Methodology of Athleticism and Fight 3

Pedagogics of Sport 4 Theory and Methodology of Physical Education 3

Physical Therapy 3 Improvement of Sportsmanship from Chosen Kind of Sport 0

Basics of Recreational Motion Games 3

Mastery in Pedagogics, Pedagogic and Sport Ethics 3




Basics of Health Psychophysiology and Immune System Regeneration 3

Total 34 Total 27


___________________________________________________________________________ 402 GENERAL CATALOG 2009-2010

Third Year



Psychology 2 Economic Theory 3 Sociology 2 Foreign Language 1,94

Foreign Language 2,06 Age and Pathologic Physiology, Age Physiology of Motion Activity 3

Sports Medicine and Medical Health Care 3 Physical Rehabilitation 4

Physical Rehabilitation 3

Organization and Methodology of Mass Physical Education, Physical Education and Sport Management 2



Basics of Informatics and Computer Engineering 3,5

Basics of Informatics and Computer Engineering 5

Organization and Methodology of Mass Physical Education, Physical Education and Sport Management 2,5 Pedagogical Practical Training 4,5 Teaching Methodology of Physical Education in Educational Institutions 4

Physical and Sport Constructions and Sports Metrology 1

Mastery in Pedagogics, Pedagogic and Sport Ethics 2,5 Life Safety and Labour Protection 3,5

Basics of Health Psychophysiology and Immune System Regeneration 2

Elective Courses

****Health-Improving Fitness 3

Theory and Methodology of Health-Improving and Adaptive Physical Education 3


Elective Courses: Health-Improving Systems in Physical Rehabilitation of Disabled Persons 3

Application of Technical Ergotropic and Regenerative Means 3

Total 3 Total 3


___________________________________________________________________________ www.kpi.ua 403

Fourth Year


Age Physiology 3 Science of Law 2 Physical and Sports Constructions 2 Political Science 1,5 Improvement of Sportsmanship from Chosen and Optional Kinds of Sport 0

Improvement of Sportsmanship from Chosen and Optional Kinds of Sport 7

Research Methods in Physical Education and Sport 1,5

Research Methods in Physical Education and Sport 3

Teaching Methodology of Physical Education in Educational Institutions 3 Basics of Biotelemetry 3 Methods and Tools of Diving 4,5 Methods and Tools of Diving 0 Foreign Language of Professional Direction 0


Teaching Theory and Methodology of Chosen Sports Kind 7 Training Practice 4,5 Labour Protection 1,5

Elective Courses ****Basics of Management and Marketing in Physical Training and Sport 2

****Physical Training in Armed Forces, Personal Security in Extreme Conditions 4

****Basics of Psychotherapy, Non-traditional Types of Psychophysical Diagnostics, Recreative Physical Training and Rehabilitation 4

****Basics of Professional and Applied Physical Training and Industrial Physical Education 2

Basics of Sport Traumatology and Balneotherapy 2

Sport Nutrition, Recreative and Pharmacological Means 2


****Health-Improving Fitness 2

Theory and Methodology of Health-Improving and Adaptive Physical Education 4

****Non-traditional Methods of Health Improvement 4

Medical Provision of Fitness Trainings 2

Basics of Health Psychophysiology 2

Occupational Psychophysiology and Peculiarities of Physical Rehabilitation 2

Total 6 Total 10


___________________________________________________________________________ 404 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Physical Rehabilitation

Fifth Year


Physical Rehabilitation by Viscera Diseases 3 Preparation of Diploma Project 22,5 Physical Rehabilitation by Traumas and Musculoskeletal Diseases 3 Pregraduation Practical Training 4,5 Physical Rehabilitation by Surgical Diseases 2 Physical Rehabilitation by Nervous System Diseases 2,5 Methods and Tools of Physiotherapy 2,5 Basics of Synthesis for Physical Rehabilitation Biotechnical Means 3 Intellectual Property 1 Labour Protection in the Branch 1 Methods and Tools of Physical Rehabilitation in Special Medical Groups 1,5 Technical Means in Physical Rehabilitation 3 Biorythmological Aspects of Adaptation Difficulties 1,5

Elective Courses Health-Improving Systems in Physical Rehabilitation of Disabled Persons 1,5 Basics of Human Bionics and Biophysics 3

Total 28,5 Total 27 Elective Courses: Physical Rehabilitation by Diseases of Endocrine System 1,5 Physical Rehabilitation by Respiratory and Cardiovascular Systems' Impairments 3

Total 4,5 Total Elective Courses: Diagnostic Tools in Physical Rehabilitation 1,5 Gender Peculiarities of Physical Rehabilitation 3

Total 4,5 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF APPLIED MATHEMATICS

___________________________________________________________________________ www.kpi.ua 405

Faculty of Applied Mathematics

Faculty of Applied Mathematics was founded in 1990. The main

areas of the faculty’s research include the development and application of various mathematical approaches to scientific, technical and manufacturing problems as well as the design of modern computerized technologies. The scientific activity at the faculty results in data processing, making of algorithms, software and hardware of automated systems for data gathering, processing and storing.

Computer Engineering includes development and designing, manufacturing, operating, technical maintenance and repairing, and also the computer hardware and software.

The total number of students who are studying at the Faculty is around 1000 including 100 foreigners.

The activity of future specialists in the field of Applied Mathematics is focused on the development of information technologies and information systems, modelling of processes and phenomena, development of theoretical fundamentals for mathematical software of information processing systems, mathematical modelling of complex technical systems, development of artificial intelligence systems, projecting of tasks solution algorithms and planning of computing experiment, development of expert systems. The activity of future specialists in the field of Computer Engineering is focusing on the development of hardware and software facilities of modern and prospective information technologies, development and use of computer systems and networks of general and special purpose, its system software, specialized computer systems and networks with optimum data, integrated computer systems, technical means of information protection in computer systems, local and distributed computer systems.

http://fpm.ntu-kpi.kiev.ua


___________________________________________________________________________ 406 GENERAL CATALOG 2009-2010

Speciality: Applied Mathematics

Degree Structure for Bachelor of Applied Mathematics

First Year




Science of Culture 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1

Algebra and Geometry 4 Physics 3 Discrete Mathematics 6 Algebra and Geometry 5,5 Mathematical Analysis 7 Discrete Mathematics 4 Programming 1 7 Mathematical Analysis 7 Introduction to Computer Systems 2 Programming 1 7,5

Total 30 Total 31,5

Second Year



Foreign Language 2 Philosophy 2,5 Physical Training 0 Foreign Language 2 Ecology 2 Physics 4 Physics 4 Mathematical Analysis 5

Discrete Mathematics 3 Theory of Probability and Mathematical Statistics 3,5

Mathematical Analysis 5 Numerical Methods 3

Theory of Probability and Mathematical Statistics 4 Differential Equations 2,5 Applied Algebra 3 Programming Languages 6 Programming Languages 6 Theory of Programming 4

Total 29 Total 32,5


___________________________________________________________________________ www.kpi.ua 407

Third Year




Foreign Language of the Professional Direction 2 Industrial Practical Training 4,5 Numerical Methods 5 Life Safety and Labour Protection 3,5 Differential Equations 3,5 Computer Graphics 3 Methods of Optimization 4,5 Methods of Optimization 4 Computing Systems 3 Object-Oriented Programming 4 Random Processes 3 Computing Systems 5,5 Operating Systems 3 Random Processes 4,5

Elective Courses Functional Analysis 3 Special Programming Languages 3

Total 27 Total 39

Fourth Year


Economics and Organization of Production 4 Science of Law 2 Mathematical Modelling and Systems Analysis 3 Political Science 1,5 Foreign Language of the Professional Direction 2 Basics of Management 1,5 Computer Software 3,17 Diploma Project 1,5 Data Bases and Information Systems 3,17 Labour Protection 1,5

Operating Systems 3 Foreign Language of the Professional Direction 2

Computer Software 2,83

Data Bases and Information Systems 2,83

Control Theory 3 Elective Courses

Data Bases and Information Systems* 1

Data Bases and Information Systems* 2

Computer Software ЕОМ* 1,33 Computer Software* 1,67 Special Program Languages* 3 Microprocessor Systems* 3



___________________________________________________________________________ 408 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Applied Mathematics

Fifth Year



Marketing 1,5 Foreign Language 2 Intellectual Property 1 Artificial Intelligence Systems 4,5 Computer Networks 4,5 Modelling of Complex Systems 4,5 Modelling of Complex Systems 4,5 Programming Systems 4,5 Programming Systems 4,5 Basics of Scientific Researches 1,5 Basics of Scientific Researches 3 Expert and Instruction Systems 4,5 Systems of Data Processing 4,5 Labour Protection in the Branch 1

Elective Courses

Programming Systems (Additional Chapter)* 1,5

Programming Systems (Additional Chapter)* 1,5

Modelling of Complex Systems (Additional Chapter)* 1,5

Modelling of Complex Systems (Additional Chapter)* 1,5

Basics of Business 1,5 Basics of Foreign Economic Relations* 1,5

Total 28 Total 27

Specialization:

Data Transmission Systems 4,5 Computer Aided Design 4,5

Total 4,5 Total 4,5

Specialization:

Expert Systems 4,5 CAD Systems 4,5

Total 4,5 Total 4,5

Sixth Year



Pregraduation Practical Training 12 Pregraduation Thesis 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 409

Degree Structure for Master of Applied Mathematics

Fifth Year



Marketing 1,5 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 2 Basics of Scientific Researches 3 Labour Protection in the Branch 1 Computer Networks 4,5 Basics of Scientific Researches 1,5 Modelling of Complex Systems 4,5 Artificial Intelligence Systems 4,5 Programming Systems 4,5 Modelling of Complex Systems 4,5

Special Subjects on Research Subject Matter 4,5 Programming Systems 4,5 Special Systems of Data Processing 2

Artificial Intelligence Systems (Additional Chapter)* 1,5

Special Subjects on Research Subject Matter 4,5

Elective Courses

Mathematical Models (Additional Chapter)* 1,5

Programming Systems (Additional Chapter)* 3

Mathematical Models (Additional Chapter)* 3

Total 28 Total 30,5

Sixth Year




Preparation of Master's Attestation Project 25,5

Science of Patent and Copyright 2 Basics of Scientific Researches 1,5 Special Systems of Data Processing 2 Expert Instruction Systems 3 Numerical-Analytical Modelling 3 Decisions Making in Conflicts 1,5 Scientific Researches on a Subject 7,5

Total 22 Total 25,5


___________________________________________________________________________ 410 GENERAL CATALOG 2009-2010

Speciality: Computer Systems and Networks






Mathematical Analysis 2. Integral Calculus 6

Discrete Mathematics 1. Multiples and Relations 2

Discrete Mathematics 2. Theory of Graphs 3

Engineering Graphics 2 Physics 1. Mechanics. Electromagnetism 5

Mathematical Analysis 1. Differential Equations 4

Programming 2. Dynamic Structures 6

Programming 1. Basics of Programming 7

Algorithms and Data Structures 2. Complex Structures 4

Structures of Data and Algorithms 1.Basics of Algorithmization 6

Computer Logic 1. Theory of Information and Coding 3

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language 2 Philosophy 1 2,5 Theory of Electric Circuits and Signals 3 Foreign Language 2 Mathematical Analysis 3. Differential Equations and Theory of Functions with Complex Variable 5

Theory of Probability and Mathematical Statistics 5

Ecology 2

Mathematical Analysis 4. Rows, Fourier Transformation and Operational Calculus 4

Physics 2. Oscillations and Waves. Quantum Physics 5

System Programming 2. Basics of System Programming 4

System Programming 1. Assembler Language 2 Peripheral Devices 3 Computer Logic 2. Computer Arithmetic 5 Operating Systems 3

Computer Logic 3. Applied Theory of Digital Automatic Machines 4

Elective Courses

Object-Oriented Programming 3 Introduction to Functional Programming 4

Logical Programming 3 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 411

Third Year



Foreign Language 2

Computer Electronics 2. Peculiarities of Computer Elements Organization and Application 4

Computer Electronics 1. Basics of Computer Electronics 3

Computer Circuitry 2. Circuitry Basics of Computer Systems 3



Computer Systems 4 Industrial Practical Training 4,5 Parallel and Distributed Calculations 5 Life Safety and Labour Protection 3,5 Basics of Translators’ Projecting 4 Organization of Databases 3 Computer Architecture 1. Software 5 Computer Graphics 4

Computer Architecture 2. Hardware 2

Elective Courses Web-Design 3

Total 30 Total 36


Course Title Credit Course Title Credit Economics and Organization of Production 3 Science of Law 2 English Language of the Professional Direction 2,75 Political Science 1,5

Computer Architecture 3 English Language of the Professional Direction 2,75

Organization of Databases 3 Data Security in Computer Systems 3 Fundamentals of Translators’ Projecting 4 Labour Protection 1,5 Computer Networks 1 Main Principles of Computer Networks Building 3,5

Computer Networks 2. Internet Protocols 3

Computer Aided Design of Computer Systems 1. CAD Maintenance 2,5

Computer Aided Design of Computer Systems 2. Stages of CAD 3

Elective Courses Modelling 3 Software of Telecommunication 2 Web-Design 2 Logical Programming * 2,5

Basics of Management 1,5 Introduction to Functional Programming* 2,5

Operating Systems* 4 Total 32,25 Total 23,75


___________________________________________________________________________ 412 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Computer Systems and Networks

Fifth Year



Basics of Marketing 1,5 Basics of Business 1,5 Foreign Language 1 Foreign Language 1

Testing, Reliability, Monitoring, Diagnostics of Computer Systems 4

Digital Processing of Signals and Images 2

Artificial Intelligence Computer Systems 3

Computer Systems of High Productivity 3

Multimedia Devices in Computer Systems 4 Programming Technology 4

Computer Cryptology 3 Theory and Designing of Computer Systems and Networks 3,5

Technique of Web-Supplements Development 2 Network Information Technologies 3 Local Networks 3 Labour Protection in the Branch 1

Elective Courses

Intellectual Property 1 Control Theory in Technical Systems* 4

Scientific and Research Activity in Computer Engineering 2,5 Measuring in Computer Systems* 4

Total 25 Total 27

Sixth Year



Pregraduation Practical Training 12 Pregraduation Thesis Projecting 21

Total 33 Total


___________________________________________________________________________ www.kpi.ua 413

Degree Structure for Master of Computer Systems and Networks

Fifth Year


Basics of Marketing 1,5 Pedagogics of Higher School 1,5 Foreign Language 1,5 Foreign Language 1,5 Testing, Reliability, Monitoring, Diagnostics of Computer Systems 4




Multimedia Devices in Computer Systems 4 Technology Programming 4

Computer Cryptology 3 Theory and Designing of Computer Systems and Networks 3,5

Technique of Web-Supplements Development 2 Network Information Technologies 3 Local Networks 3 Labour Protection in the Branch 1

Elective Courses


Scientific and Research Activity in Computer Engineering 1 Measuring in Computer Systems* 3,5

Total 24 Total 27

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Scientific Research on a Subject 11 Science of Patent and Copyright 2 Preparation of Master's Thesis 25,5 Informational Capability of Computer Technologies and Networks 3 Distance Platforms and Learning Technologies 3 Contemporary Operation Systems 3 Research Areas and Development of Computer Systems and Networks 3




___________________________________________________________________________ 414 GENERAL CATALOG 2009-2010

Speciality: System Software
















Total 30 Total 31,5




Ecology 2






Elective Courses




___________________________________________________________________________ www.kpi.ua 415

Third Year



Foreign Language 2









Total 30 Total 36












___________________________________________________________________________ 416 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of System Software

Fifth Year




Testing, Reliability, Monitoring, Diagnostics of Computer Systems 4 Labour Protection in the Branch 1



Multimedia Devices in Computer Systems 4


Technology of Software Systems Design 3 Computer Networks Programming 4

Research Areas and System Programming Development 2

Designing Technology of Speial Operating Systems 3,5

Decision Support Systems 3 User Interfaces Programming 3 Elective Courses

Scientific and Research Activity in Computer Engineering 2,5

Control Theory in Technical Systems 4

Intellectual Property 1 Measuring in Computer Systems* 4

Total 25 Total 27

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 417

Speciality: Specialized Computer Systems
















Total 30 Total 31,5




Ecology 2






Elective Courses




___________________________________________________________________________ 418 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2









Total 30 Total 36












___________________________________________________________________________ www.kpi.ua 419

Degree Structure for Specialist of Specialized Computer Systems

Fifth Year




Testing, Reliability, Monitoring, Diagnostics of Computer Systems 4





Self-Identification Computer Systems 2

Peripheral Devices Programming 2 Designing of Specialized Computer Systems 2,5

Software of Specialized Computer Systems 3 Board and Navigation Computers 2

Embedded Computer Systems Designing 3

Special-purpose Computer Systems Theory and Designing 4

Labour Protection in the Branch 1 Elective Courses


Scientific and Research Activity in Computer Engineering 2,5 Measuring in Computer Systems* 4

Total 25 Total 27

Sixth Year



Pregraduation Practical Training 12 Diploma Projecting 21

Total 33 Total


___________________________________________________________________________ 420 GENERAL CATALOG 2009-2010

Degree Structure for Master of Specialized Computer Systems

Fifth Year


Basics of Marketing 1,5 Pedagogics of Higher School 1,5 Foreign Language 1,5 Foreign Language 1,5 Testing, Reliability, Monitoring, Diagnostics of Computer Systems 4





Self-Identification Computer Systems 2

Peripheral Devices Programming 2 Designing of Specialized Computer Systems 2,5

Software of Specialized Computer Systems 3 Board and Navigation Computers 2 Embedded Computer Systems Designing 3

Special-purpose Computer Systems Theory and Designing 4


Intellectual Property 1 Control Theory in Technical Systems* 3,5

Scientific and Research Activity in Computer Engineering 1 Measuring in Computer Systems* 4

Total 24 Total 27

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Informational Capability of Computer Technologies and Networks 3 Distance Platforms and Learning Technologies 3 Contemporary Operation Systems 3 Research and Development Dimensions of Computer Systems and Networks 3 Scientific Research on a Subject 11




___________________________________________________________________________ www.kpi.ua 421

Speciality: Software for Automated Systems

Degree Structure for Bachelor of Software Engineering

First Year






Discrete Mathematics 1. Multiples and Relations 2,5

Discrete Mathematics 2. Theory of Graphs 2,5


Mathematical Analysis 1. Differential Equations 4 Basics of Programming 7 Introduction to Program Engineering 7,5


Structures of Data and Algorithms 1. Basics of Algorithmization 5 Discrete Structures 3,5

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Mathematical Analysis 3. Differential Equations and Theory of Functions with Complex Variable 5 Philosophy 1 2,5

Ecology 2 Basics of Electrical Engineering and Electronics 4



System Programming 1. Assembler Language 2


Computer Logic 2. Computer Arithmetic 5


Programming Technology 1. 3 Computer Logic 3. Applied Theory of Digital Automatic Machines 4

Programming Technology 2. 6 Elective Courses

Logical Programming 3 Object-Oriented Programming 3

Total 30 Total 31,5


___________________________________________________________________________ 422 GENERAL CATALOG 2009-2010

Third Year



Sociology 1,5 Parallel and Distributed Calculations 4

Mathematical Logic 3 Life Safety and Labour Protection 3,5

Computer Electronics 7 System Analysis Basics of Objects and Processes 3

Operating Systems 6 Algorithms and Calculation Methods 4

Computer Circuitry 2. Circuitry Basics of Computer Systems 5 Organization of Databases 4 Industrial Practical Training 4,5 Computer Graphics 4


Elective Courses Introduction to Functional Programming 4 Software of Telecommunication 2,5

Total 30 Total 36,5

Fourth Year


Foreign Language 2 Political Science 1,5 Computer Networks 5,39 Science of Law 1,5 Data Security Maintenance Software in Computer Systems 4 Computer Networks 3,61

Computer Architecture 4 Economics and Organization of Production 3

Artificial Intelligence Systems 1,78 Computer Architecture 4 Computer Modelling 2 Artificial Intelligence Systems 2,22 Computer Modelling 2

Total 19,17 Total 17,83 Elective Courses: Web-Design 3,5 System Software 4

Total 7,5 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF PHYSICS AND MATHEMATICS

___________________________________________________________________________ www.kpi.ua 423

Faculty of Physics and Mathematics

The powerful scientific background, labor potential enabled the establishment of Faculty of Physics and Mathematics in 1996.

Since Kiev Polytechnic Institute establishing the educational and scientific research activity in the area of physical and mathematical sciences were developed by well-known scientists G.G. De-Metts, V.Y. Bukreyev, L.I. Kardash and V.P. Yermakov.

The Faculty provides training for Bachelor’s Degree, Specialist and Master in modern fields of Physics and Mathematics, offers postgraduate and doctoral studies.

The Faculty includes following departments: General and Experimental Physics Department, General and Theoretical Physics Department, the Department of General and Solid-State Physics, the Department of Mathematical Analysis and Theory of Probability, the Department of Differential Equations and the Department of Mathematical Physics.

37 Doctors of Science and 145 PhDs are working at faculty’s departments.

The graduates of the Faculty work in theoretical and applied fields of modern Physics and Mathematics as teachers of higher education institutions, lyceums and schools.

http://kpi.ua/fmf


___________________________________________________________________________ 424 GENERAL CATALOG 2009-2010

Speciality: Physics

Degree Structure for Bachelor of Physics

First Year


Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language. Business Course 1 History of Ukraine 1,5

Mathematical Analysis-1 8 Philosophy (Ethics, Aesthetics, Religion Science, Logic) 1,5

Linear Algebra and Analytic Geometry 7 Culture Science 1 Computer Science and Programming-1. Computer Architecture and Organization 6 Mathematical Analysis-2 6

Discrete Mathematics 4

Computer Science and Programming-2. Basics of Programming Techniques 3,5

Computer Graphics 2 Basics of Vector and Tensor Analysis 4

Chemistry 2 General Physics-1. Mechanics 7 Descriptive Geometry 3

Total 30 Total 31,5

Second Year


Foreign Language-2 2 Philosophy 3 Ecology 2 Foreign Language-2 2 Mathematical Analysis-3 6 Mathematical Analysis-4 6

Differential and Integral Equations 6

Computer Science and Programming-4. Programming Systems 5

Computer Science and Programming-3. Basics of Programming Techniques (Pascal) 3

General Physics-3. Electricity and Magnetism 8

General Physics-2. Molecular Physics 8 Mathematical Methods in Physics-1 5 Theory of Probability and Mathematical Statistics 3

Basics of Electrical Engineering and Radioelectronics-1 2,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 425

Third Year


Sociology 2 Basics of Economics 3 Foreign Language of the Professional Direction 2


Computer Science and Programming-5 3

Computer Science and Programming-6 5,5

General Physics. Optics 8 General Physics. Atomic Physics 6 Mathematical Methods in Physics-2 3 Life and Occupation Safety 3,5 Psychology 2 Pedagogy 5 Theoretical Physics. Classical Mechanics 7

Theoretical Physics. Electrodynamics 7

Basics of Electrical Engineering and Radioelectronics-2 3

Total 30 Total 32

Fourth Year


Foreign Language of the Professional Direction 1,89 Science of Law 2 Computer Science and Programming 1,69 Political Science 1,5

Nuclear and Particle Physics 3 Foreign Language of the Professional Direction 1,61

Theoretical Physics. Quantum Mechanics 2,86

Computer Science and Programming 1,81

Methods for Physical Problems Solving 1,5 Labour Protection 1,5

Teaching Methods of Physics 1,89 Theoretical Physics. Quantum Mechanics 2,64

Teaching Methods of Physics 1,61 Pedagogical Practical Training 4,5

Elective Courses Astrophysics 2,47 Astrophysics 1,53 Theoretical Physics. Statistical Physics and Thermodynamics 2,61

Theoretical Physics. Statistical Physics and Thermodynamics 2,39

Selected Issues of Physics 3,53 Selected Questions of Physics 2,97 Modern Issues of Solid-State Body Physics 3,53

Modern Issues of Solid-State Body Physics 2,97



___________________________________________________________________________ 426 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Physics

Fifth Year


Specific Chapters of Experimental Physics 3,42 Intellectual Property 1 Physics of Magnetic Phenomena 1,67 Foreign Language 2

Problems of Modern Physics 1,58 Specific Chapters of Experimental Physics 5,08

Structure and Dynamics of Metals' Surfaces 3 Physics of Magnetic Phenomena 1,83 Teaching Methods of Physics 1,5 Problems of Modern Physics 1,92 Teaching Methods of Computer Science 2,5

Methods for Solving of General Physics Problems 3

Physics and Technique of Low Temperatures 2,58


Scientific and Pedagogical Training 9 Macroscopic Quantum Phenomena 2 Elective Courses



Methods of Surface Analysis 1,5 Total 27,94 Total 24,56

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 427

Degree Structure for Master of Physics

Fifth Year


Basics of Scientific Researches 2 Philosophical Problems of Scientific Knowledge 1,5

Physics and Technique of Low Temperatures 2,58 Intellectual Property 1 Problems of Modern Physics 1,58 Foreign Language 2

Teaching Methods of Physics 1,5 Mathematical Modelling of Processes and Systems 3

Teaching Methods of Computer Science 2,5


Specific Chapters of Experimental Physics 3,42 Macroscopic Quantum Phenomena 2 Structure and Dynamics of Metals' Surfaces 3 Problems of Modern Physics 1,92

Physics of Magnetic Phenomena 1,67 Specific Chapters of Experimental Physics 5,08

Scientific and Pedagogical Practical Training 9

Methods for Solving General Physics Problems 3

Physics of Magnetic Phenomena 1,83 Elective Courses

Modern Questions of Solid-State Body Physics 2,69


Methods of Surface Analysis 1,5 Total 29,94 Total 29,06

Sixth Year


Pedagogics of Higher Education 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Basics of Quantum Field Theory 2 Physical Basics of Diffusion 7 Computer Simulation in Physics 3 Modern Technologies in Solid-State Body Physics 2



___________________________________________________________________________ 428 GENERAL CATALOG 2009-2010

Speciality: Mathematics

Degree Structure for Bachelor of Mathematics

First Year


Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language. Business Course 1

Philosophy (Ethics, Aesthetics, Religion Science, Logic) 1,5

Mathematical Analysis-1. Introduction to Mathematical Analysis. Limits. Derivatives 9 Culture Science 1 Analytic Geometry-1. Vector Algebra. Line and Plane 5 History of Ukraine 1,5 Linear Algebra-1. Matrices, Determinants, Systems of Linear Equations 5

Mathematical Analysis-2. Undefined, Defined, Unown and Stiltjes' integrals 9,5

Computer Science and Programming-1. Personal Computer Architecture, Organization and Software 4

Analytic Geometry-2. Second Order Lines and Surfaces 5,5

Linear Algebra-2. Polynomials, Bilinear Forms, Linear Operators 5,5

Computer Science and Programming-2. Programing Languages 3

Elective Courses Discrete Mathematics-1. Kombinatorics and Elements of Mathematical Logic 4

Discrete Mathematics-2. Theory of Graphs 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 429

Second Year


Foreign Language-2 2 Foreign Language-2 2 Mathematical Analysis-3. Rows. Functions of Many Variables 8 Philosophy 3

Ecology 2

Mathematical Analysis-4. Multiple, Curvilinear, Surface and Parametrically Dependent Integrals 8,5

Computer Science and Programming-3. Programing Languages 5

Computer Science and Programming-4. Operating Systems 3

Algebra and Theory of Numbers-1. Theory of Numbers and Algebra Elements 3

Algebra and Theory of Numbers-2. Groups, Rings, Fields 5,5

Differential Equations-1. Differential Equations of the First and Higher Orders 5

Differential Equations-2. Systems of Differential Equations. Applications 5

Elective Courses

Descriptive Geometry 3 Differential Geometry and Topology-2 4,5

Differential Geometry and Topology-1 2

Total 30 Total 31,5


Course Title Credit Course Title Credit Sociology 2 Basics of Economics 3 Foreign Language of the Professional Direction 2


Computer Science and Programming-5 4 Life and Occupation Safety 3,5

Psychology 2 Computer Science and Programming-6 1,5

Complex Analysis-1 3 Pedagogy 5 Probability Theory and Mathematical Statistics 6 Complex Analysis-2 3 Teaching Techniques in Mathematics-1 2

Functional Analysis and Integral Equations-1 4

Theory of Measure and Integral 6 Teaching Techniques in Mathematics-2 2

Theoretical Physics-1 3 Theoretical Physics-2 2 Numerical Methods-1 3

Qualitative Theory of Differential Equations 3

Total 30 Total 32


___________________________________________________________________________ 430 GENERAL CATALOG 2009-2010

Fourth Year


Foreign Language of the Professional Direction 1,89 Science of Law 2 Theoretical Physics 2 Political Science 1,5 Computer Science and Programming 1,06


Teaching Methods of Mathematics 1,61 Computer Science and Programming 0,94

Mathematical Physics Equations 3,69 Teaching Methods of Mathematics 1,39 Numerical Methods 2,5 Mathematical Physics Equations 2,31 Variation Calculation 5 Labour Protection 1,5 Theory of Operators 2,69 Theory of Operators 2,31 Qualitative Theory of Differential Equations 2,5 Pedagogical Practical Training 4,5

Elective Courses Theory of Algorithms and Mathematical Logic 2 Theory of Dynamic Systems 1,5 Integral Transformations 1,89 Integral Transformation 1,61 Mathematical Theory of Control 3



___________________________________________________________________________ www.kpi.ua 431

Degree Structure for Specialist of Mathematics

Fifth Year


Problems of Modern Mathematics 1,58 Intellectual Property 1 Method for Solving of Higher Mathematics Problems 1,33 Foreign Language 2 Teaching Methods of Computer Science 2 Problems of Modern Mathematics 2,42

Theory of Accidental Processes 3,33 Teaching Methods for Solving Higher Mathematics Problems 1,67

Qualitative Theory of Differential Equations 4 History of Mathematics 1,5

Scientific and Pedagogical Practical Training 9

Teaching Methods of Mathematics at Higher Educational Establishments 2,5

Theory of Accidental Processes 3,17

Methods of Mathematical Modelling 5

Chaos in Dynamic Systems 4,5 Elective Courses

Markov Processes and its Applications 2,44


Statistical Analysis 2,5 Total 26,18 Total 26,32

Elective Courses: Actual Problems of Dynamic Systems Theory 2,5 Actual and Financial Mathematics 2,56 Actual and Financial Mathematics 2,44


Basics of Solitons Theory 3,5 Problems of Mathematical Physics. Generalized Solutions 2,22

Problems of Mathematical Physics. Generalized Solutions 1,78


Sixth Year



Total 33 Total


___________________________________________________________________________ 432 GENERAL CATALOG 2009-2010

Degree Structure for Master of Mathematics



Problems of Modern Mathematics 1,58 Philosophical Problems of Scientific Knowledge 1,5

Methods for Solving of Higher Mathematics Problems 1,33 Intellectual Property 1 Teaching Methods of Mathematics 2 Foreign Language 2 Basics of Scientific Researches 2 Problems of Modern Mathematics 2,42

Theory of Accidental Processes 3,33 Methods for Solving of Higher Mathematics Problems 1,67

Qualitative Theory of Differential Equalizations 4 History of Mathematics 1,5

Scientific and Pedagogical Training 9

Teaching Methods of Mathematics at Higher Educational Establishments 2,5

Theory of Accidental Processes 3,17

Methods of Mathematical Modelling 5

Chaos in Dynamic Systems 4,5 Elective Courses



Statistical Analysis 2,5 Total 28,18 Total 27,82

Elective Courses: Actual Problems of Dynamic Systems Theory 2,5 Actual and Financial Mathematics 2,56 Actual and Financial Mathematics 2,44


Basics of Solitons Theory 3,5 Mathematical Physics Problems. Generalized Solutions 2,22

Mathematical Physics Problems. Generalized Solutions 1,78



Course Title Credit Course Title Credit Pedagogics of Higher Education 1,5 Preparation of Master's Thesis 25,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Statistics of Accidental Processes 4 Functionally Differential Equation 4 Additional Chapters of Mathematical Analysis 4,5 Differential Equations in Problems of Economy, Ecology, Sociology 4 Theory of Generalized Functions 3,5


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF RADIO ENGINEERING

___________________________________________________________________________ www.kpi.ua 433

Faculty of Radio Engineering

In 1921 the first radio engineering laboratory was established at the Electrical Power Engineering Faculty in Ukraine. In 1928 there was graduation of first radio engineers. In 1930 Faculty of Radio Engineering was founded.

The scientific research at the faculty is pursued in following areas: microwave devices and systems, fiber optics, data logging and processing, television, medical radio electronics.

The faculty has 4 departments for engineers training in following fields: “Radio Engineering” and “Electronic Devices”.

Within last 5 years an intensive scientific work is arranged in the area of medical radio engineering, there were developed a variety of efficient devices “Politon” and now are used in applied medicine, in scientific researches and different branches of agriculture.

The Department of Radio Reception and Signals Processing conducts scientific researches in the field of efficiency increasing for radio receiving devices, digital and analog information processing, designing of high-voltage semiconductor electronics devices, special television devices.

http://rtf.kpi.ua


___________________________________________________________________________ 434 GENERAL CATALOG 2009-2010

Speciality: Radio Engineering

Degree Structure for Bachelor of Radio Engineering

First Year



Science of Culture 1 Philosophy 2 (Science of Religion, Ethics, Aesthetics) 1

Higher Mathematics 7,5 Higher Mathematics 8,5 General Physics 8 General Physics 8,5 Chemistry, Electrical and Radio Materials 2,5



Basics of Network Information Technologies 3

Componentry of Radioelectronic Equipment 1,5

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics 7 Philosophy 2,5 Ecology 2 Basics of Circles Theory 8 Componentry of Radioelectronic Equipment 6 Digital Devices 6

Basics of Circuit Theory 8 Signals and Processes in Radio Engineering 7

Elective Courses

Radio Measurements 3 Basics of CAD and Simulation in Electronics 4

Basics of CAD and Simulation in Electronics 2

Power Supply of Radioelectronic Equipment 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 435

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language of the Professional Direction 2


Signals and Processes in Radio Engineering 8 Industrial Practical Training 4,5 Electrodynamics and Radio Wave Propagation 7 Digital Signals Processing 6

Digital Devices 6 Electronic and Quantum Devices of UHF 4

Analog Electronic Devices 4 UHF Devices and Antennas 8 Signals Generation and Forming 6,5

Total 30 Total 36,5

Fourth Year


Foreign Language of the Professional Direction 2 Political Science 1,5 Radio Automation 3 Science of Law 2 Design and Technology of Radioelectronic Equipment 5,5 Labour Protection 1,5

Basics of Television 4,5 Foreign Language of the Professional Direction 2

CAD Systems of Radioelectronic Devices 2,5

Design and Technology of Radioelectronic Equipment 1,5

Radioelectronic Systems 5 Radioelectronic Systems 4 Basics of Information Theory 4 Basics of Information Theory 3,5

Signals Reception and Processing 2,5 Economics and Organization of Production 3

TV Systems and Networks 4 Electromagnetic Compatibility 2,5

Elective Courses

Design of Digital Devices on Programming Logical Integrated Circuits 2,5

Total 29 Total 28


___________________________________________________________________________ 436 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Radio Engineering

Fifth Year


Foreign Language 2 Antenna Systems 4,5 Labour Protection in the Branch 1,5 Satellite Information Systems 2,5

Information Transmission Lines 2

Metrology, Standardization and Certification of Radioelectronic Equipment 1,5

Information Transmission Lines 1 Reliability and Maintenance of Radioelectronic Equipment 1,5

Interference Immunity of Radioelectronic Equipment 2,5

Modern Componentry of Radioelectronic Equipment 1

Microprocessors in Radioelectronic Equipment 4 Intellectual Property 1 Devices of Microwave and Optical Bands 5

Radioelectronic Information Systems 3

Devices for Information Recording and Reproduction 1 Network Information Technologies 2

Information Protection 2,5 Methods of Digital Information Processing 2

CAD with Internet Means 2 Radioelectronic Systems 2 Radioelectronic Information Systems 2

Elective Courses Computer Simulation of Radioelectronic Devices 3

Optimal Design of Radioelectronic Devices 3

Total 30,5 Total 22 Specialization: Networking and Radioaccess Technologies 2

Networking and Radioaccess Technologies 3

Adaptive Information Processing in Networks 4

Total 2 Total 7

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 437

Degree Structure for Master of Radio Engineering




Basics of Scientific Researches 2 Science of Patent and Copyright 2 Labour Protection in the Branch 1,5 Satellite Information Systems 2,5



Information Transmission Lines 1 Antenna Systems 4,5 Interference Immunity of Radioelectronic Equipment 2 Intellectual Property 1 Microprocessors in Radioelectronic Equipment 3,5


Devices of Microwave and Optical Bands 5

Radioelectronic Information Systems 3,5

CAD with Internet Means 2 Network Information Technologies 2

Information Protection 2 Methods of Digital Information Processing 2

Radioelectronic Systems 2 Radioelectronic Information Systems 2



Specialization Networking and Radioaccess Technologies 2

Networking and Radioaccess Technologies 3

Adaptive Information Processing in Networks 4,5

Total 32 Total 34


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5 Special Chapters of Higher Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Research in Approved Area of Master's Thesis 4,5 Pedagogical Practical Training 6

Total 23 Total 25,5


___________________________________________________________________________ 438 GENERAL CATALOG 2009-2010

Speciality: Radio Engineering Devices, Systems and

Complexes


First Year





Higher Mathematics 7,5 Higher Mathematics 8,5 General Physics 8 General Physics 8,5

Chemistry, Electrical and Radio Materials 2,5





Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Higher Mathematics 7 Philosophy 2,5 Ecology 2 Basics of Circuit Theory 8

Componentry of Radioelectronic Equipment 6 Digital Devices 6


Elective Courses

Radio Measurements 3 Basics of CAD and Simulation in Electronics 4


Power Supply of Radioelectronic Equipment 2

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 439

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Electrodynamics and Radio Wave Propagation 7


Foreign Language of the Professional Direction 2 Industrial Practical Training 4,5 Signals and Processes in Radio Engineering 8 Digital Signals Processing 6



Total 30 Total 36,5

Fourth Year




Basics of Technical Diagnostics 2,5 Design and Technology of Radioelectronic Equipment 1,5

Radioelectronic Systems 5 Radioelectronic Systems 4 Basics of Information Theory 4 Basics of Information Theory 3,5


Imaging Systems 4 Electromagnetic Compatibility 2,5

Elective Courses


Total 29 Total 28


___________________________________________________________________________ 440 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Radio Engineering Devices, Systems and

Complexes


Course Title Credit Course Title Credit Foreign Language 2 Methods of Computer Tomography 3,5

Labour Protection in the Branch 1,5 Technical Means of Diagnostics and Cure 3,5

Methods of Biomedical Investigations and Cure 1,5

Medical Electronic Devices and Systems 3,5

Antennas in Medicine 4,5 Radioelectronic Information Systems 3,5

Biotelemetry 1,5 Metrological Support of Biomedical Equipment 1,5

Microprocessors in Radioelectronic Equipment 4


Methods of Computer Tomography 2,5 Reliability and Maintenance of Radioelectronic Equipment 1

Technical Means of Diagnostics and Cure 2

Methods of Digital Information Processing 2

Medical Electronic Devices and Systems 3,5 Intellectual Property 1 Radioelectronic Information Systems 2,5



Total 28,5 Total 24

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 441

Degree Structure for Master of Radio Engineering Devices, Systems and Complexes

Fifth Year



Basics of Scientific Researches 2 Science of Patent and Copyright 2 Labour Protection in the Branch 1,5 Methods of Computer Tomography 3,5 Methods of Biomedical Investigations and Cure 1,5

Technical Means of Diagnostics and Cure 3

Antennas in Medicine 4 Medical Electronic Devices and Systems 3

Biotelemetry 1,5 Radioelectronic Information Systems 3

Microprocessors in Radioelectronic Equipment 3,5


Methods of Computer Tomography 2,5 Methods of Digital Information Processing 2

Technical Means of Diagnostics and Cure 2 Intellectual Property 1 Medical Electronic Devices and Systems 4


Radioelectronic Information Systems 2,5



Total 30 Total 26,5


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Preparation of Thesis 25,5 Special Chapters of Higher Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Research in Agreed Area of Master's Thesis 4,5 Pedagogical Practical Training 6

Total 23 Total 25,5


___________________________________________________________________________ 442 GENERAL CATALOG 2009-2010

Speciality: Radio Communication, Broadcasting and

Television Equipment





Higher Mathematics 7,5 Higher Mathematics 8,5 General Physics 8 General Physics 8,5 Chemistry, Electrical and Radio Materials 2,5





Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics 7 Philosophy 2,5 Ecology 2 Basics of Circuit Theory 8 Componentry of Radioelectronic Equipment 6 Digital Devices 6


Elective Courses

Radio Measurements 3 Power Supply of Radioelectronic Equipment 2



Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 443

Third Year


Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Foreign Language of the Professional Direction 2


Signals and Processes in Radio Engineering 8 Industrial Practical Training 4,5 Electrodynamics and Radio Wave Propagation 7 Digital Signals Processing 6



Total 30 Total 36,5

Fourth Year




CAD Systems of Radioelectronic Devices 2,5

Design and Technology of Radioelectronic Equipment 1,5

Radioelectronic Systems 5 Radioelectronic Systems 4 Basics of Communication Theory and Information Transmission 4

Basics of Communication Theory and Information Transmission 3,5


TV Systems and Networks 4 Electromagnetic Compatibility 2,5

Elective Courses


Total 29 Total 28


___________________________________________________________________________ 444 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Radio Communication, Broadcasting and

Television Equipment


Course Title Credit Course Title Credit Foreign Language 2 Satellite Information Systems 2,5

Labour Protection in the Branch 1,5


Information Transmission Lines 2 Reliability and Maintenance of Radioelectronic Equipment 1,5

Information Transmission Lines 1 Antenna Systems 4,5 Interference Immunity of Radioelectronic Equipment 2,5

Modern Componentry of Radioelectronic Equipment 1

Microprocessors in Radioelectronic Equipment 4 Mobile Communication Systems 4 Devices of Microwave and Optical Bands 5 Intellectual Property 1 Devices for Information Recording and Reproduction 1 Communication Networks 2 Studio Facilities 2 Fixed Communication Systems 3 Radio Broadcasting 2 Information Protection 2,5



Specialization Information Security in Multimedia Systems 2,5

Methods and Means for Multimedia 3

WEB-Design 2 Total 31 Total 29

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 445

Degree Structure for Master of Radio Communication, Broadcasting and Television Equipment

Fifth Year



Basics of Scientific Researches 2 Science of Patent and Copyright 2 Labour Protection in the Branch 1,5 Satellite Information Systems 2,5



Information Transmission Lines 1 Antenna Systems 4,5 Interference Immunity of Radioelectronic Equipment 2 Mobile Communication Systems 4 Microprocessors in Radioelectronic Equipment 3,5 Intellectual Property 1 Devices of Microwave and Optical Bands 5


Studio Facilities 2 Communication Networks 2 Radio Broadcasting 2 Fixed Communication Systems 3 Information Protection 2,5



Specialization

2,5 Methods and Means for Multimedia 3

Information Security in Multimedia Systems WEB-Design 2

Total 31 Total 33


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5 Special Chapters of Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Research in Agreed Area of Master's Thesis 4,5 Pedagogical Practical Training 6

Total 23 Total 25,5


___________________________________________________________________________ 446 GENERAL CATALOG 2009-2010

Speciality: Manufacturing of Electronic Facilities

Degree Structure for Bachelor of Radio Engineering Devices

First Year




Higher Mathematics 9 Higher Mathematics 7,5 General Physics 5 General Physics 4 Computer Engineering and Programming 5 General Physics 2,5 Engineering and Computer Graphics 5


Metrological Support of Radioelectronic Equipment 2


Chemistry 5 Information Technologies 3

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Higher Mathematics 5 Philosophy 2,5 Ecology 2 Basics of Radioelectronics 8,5

Basics of Radioelectronics 6 Electronic Devices and Microelectronics 5

Electronic Devices and Microelectronics 5,5

Material Science of Radioelectronic Equipment 4

Material Science of Radioelectronic Equipment 6,5 Information Technologies 3 Mechanics 3,5 Mechanics 6

Total 30,5 Total 31


___________________________________________________________________________ www.kpi.ua 447

Third Year






Componentry of Electronic Equipments 1

Basics of Metrology, Compatibility and Standardization 3 Circuitry of Electronic Equipment 4,5

Basics of Electrodynamics 5 Standardization and Certification of Production 1,5

Production of Electronic Equipments 6 Life Safety and Labour Protection 3,5


Physical and Theoretical Basics of Design 3

Circuitry of Electronic Equipment 4 Design and Technological Practical Training 4,5

Constructions of UHF Devices 6

Technology and Design of Microcircuitry and Microassembly 5,5

Elective Courses

Information Computer and Internet Technologies 3,5

Total 29 Total 37


___________________________________________________________________________ 448 GENERAL CATALOG 2009-2010

Fourth Year



Foreign Language of the Professional Direction 2 Political Science 1,5

Physical and Theoretical Basics of Design 5,5 Science of Law 1,5

Technology and Design of Microcircuitry and Microassembly 1


Economics and Organization of Production 4 Labour Protection 1,5

Microprocessors in Electronic Equipments 6

Basics of Electronic Equipments Design 4,5

Radio Devices 4 Basics of CAD 4,5 Graduation Thesis Projecting 1,5 Technology of Component Parts 3,5

Elective Courses

Optoelectronic Devices 3 Electronic Equipment of Banking Systems 2

Functional and Nanoelectronics 2 Computer Simulation of Circuits, Constructions and Technologies 3

Computer Simulation of Circuits, Constructions and Technologies 3

Microcontroller Based Control of Electronic Equipment 2,5

Total 30,5 Total 28

Elective Courses:

Functional and Nanoelectronics 2 Electronic Equipment of Banking Systems 2



Ergonomics and Design in Radioelectronic Equipment 2


Medical and Social Basics of Health 1

Total 7 Total 8,5


___________________________________________________________________________ www.kpi.ua 449

Degree Structure for Specialist of Manufacturing of Electronic Facilities



Foreign Language 2 Technology of Electronic Equipment Manufacturing 1

Labour Protection in the Branch 1,5 Optimization of Design Solutions 2 Technical and Economic Feasibility of Engineering Decisions 2,5 Intellectual Property 1 Design of Electronic Equipment 6 Means of Telecommunication 3 Basics of Television and TV Systems 4

Technical Diagnostics, Control and Testing of Electronic Equipment 3

Technology of Electronic Equipment Manufacturing 4 Consumer Electronic Equipment 3

CAD of Electronic Equipment 3 Automation of Electronic Equipment Manufacturing 4

Antennas 2 Computer Networks 3 Elective Courses

Information Security Devices in Electronic Equipment 2

Automation of Technical Information Processing 3,5

Basics of Business 2 Total 27 Total 25,5

Specialization:

CAD in Circuitry 3

Simulation of Circuitry, Design and Technology of Electronic Equipment 4,5

CAD of IC and PCB 3 Software for CAD 3,5 CAD of Hardware 4 LAN Design 3

Total 6 Total 15 Specialization: Basics of Information Theory and Encoding 4 Data Base Design 3,5 Electronic Means for Technical Intelligence 2 Banking Electronic Systems 3,5

Methods and Equipment for Information Security 4

Information and Measurement Instrumentation for Banking Systems 4

Total 6 Total 15

Sixth Year



Total 33 Total


___________________________________________________________________________ 450 GENERAL CATALOG 2009-2010

Degree Structure for Master of Manufacturing of Electronic Facilities

Fifth Year



Basics of Scientific Researches 2 Science of Patent and Copyright 2

Labour Protection in the Branch 1,5 Technology of Electronic Equipment Manufacturing 1

Technical and Economic Feasibility of Engineering Decisions 2,5 Intellectual Property 1

Design of Electronic Equipment 6 Mathematical Modelling of Processes and Systems 3

Basics of Television and TV Systems 4 Scientific Research in Agreed Area 0,5 Technology of Electronic Equipment Manufacturing 4 Means of Telecommunication 3

Scientific Research in Agreed Area 0,5 Technical Diagnostics, Control and Testing of Electronic Equipment 3

Antennas 2 Consumer Electronic Equipment 3

Automation of Electronic Equipment Manufacturing 4

Computer Networks 3 Elective Courses



Basics of Business 2 Total 26,5 Total 30,5

Specialization:

CAD in Circuitry 3 Simulation of Circuitry, Design and Technology 4,5

CAD of IC and PCB 3 CAD of Hardware 4,5 LAN Design 3

Total 6 Total 12 Specialization: Basics of Information Theory and Encoding 4 Banking Electronic Systems 4 Electronic Means for Technical Intelligence 2

Methods and Equipment for Information Security 4

Information and Measurement Instrumentation for Banking Systems 4

Total 6 Total 12


___________________________________________________________________________ www.kpi.ua 451

Sixth Year



Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5

Special Chapters of Higher Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2


Mathematical Methods of Optimization 3 Technique of Experimental Researches 4 Pedagogical Practical Training 6



___________________________________________________________________________ 452 GENERAL CATALOG 2009-2010

Speciality: Biotechnical and Medical Devices and

Systems










Total 30 Total 31,5

Second Year







Total 30,5 Total 31


___________________________________________________________________________ www.kpi.ua 453

Third Year







Basics of Electrodynamics 5 Physical and Theoretical Basics of Design 3

Production of Electronic Equipment 6

Standardization and Certification of Production 1,5

Componentry of Electronic Equipments 6 Life Safety and Labour Protection 3,5


Radio Measurements 2,5

Basics of Normal and Pathological Physiology 3

Interaction of Physical Fields with Biological Objects 2

Basics of Histology 2 Basics of Biochemistry 2

Elective Courses


Total 29 Total 37


___________________________________________________________________________ 454 GENERAL CATALOG 2009-2010

Fourth Year


Foreign Language of the Professional Direction 2 Political Science 1,5 Physical and Theoretical Basics of Design 5,5 Science of Law 1,5 Economics and Organization of Production 4,5


Microprocessors in Electronic Equipments 5,5 Labour Protection 1,5 Electronic Equipment and Systems for Diagnostics 4,5


Introscopy of Biological Objects and Methods of Information Imaging 2 Basics of CAD 4,5 Graduation Thesis Projecting 1,5

Biological Signals, Transducers and Measuring Converters 2

Elective Courses

Optoelectronic Devices 3 Computer Simulation of Circuits, Constructions and Technologies 3




Total 32 Total 26,5

Elective Courses:



Electronic Equipment of Banking Systems 2




Total 7 Total 8,5


___________________________________________________________________________ www.kpi.ua 455

Degree Structure for Specialist of Biotechnical and Medical Devices and

Systems

Fifth Year



Foreign Language 2 Design and Technology of Electronic Biomedical Equipment 5

Labour Protection in the Branch 1,5 Optimization of Design Solutions 2

Technical and Economic Feasibility of Engineering Decisions 2,5

Metrology of Biomedical Equipment 3

Basics of Television and TV Systems 4 Equipment for Aftertreatment 3

Techniques and Equipment for Biological Signals Processing 2

Maintenance of Biomedical Equipment 4

Electronic Equipment for Medical Technologies 3 Organization of Health Care 1,5 Equipment for Biomedical Researches 3 Intellectual Property 1

Automation of Biological Information Processing 1,5

Design and Technology of Electronic Biomedical Equipment 6

Elective Courses



Basics of Business 2

Total 27,5 Total 25

Sixth Year




Total 33 Total


___________________________________________________________________________ 456 GENERAL CATALOG 2009-2010

Degree Structure for Master of Biotechnical and Medical Devices and Systems

Fifth Year


Foreign Language 2 Science of Patent and Copyright 2


Labour Protection in the Branch 1,5 Design and Technology of Electronic Biomedical Equipment 5


Metrology of Biomedical Equipment 3

Basics of Television and TV Systems 4

Scientific Researches in Agreed Subject Area 0,5

Techniques and Equipment for Biological Signals Processing 2 Equipment for Aftertreatment 2,5 Electronic Equipment for Medical Technologies 3

Maintenance of Biomedical Equipment 4,5

Equipment for Biomedical Researches 3 Intellectual Property 1 Design and Technology of Electronic Biomedical Equipment 6



Elective Courses Information Security Devices in Electronic Equipment 2


Basics of Business 2 Total 28,5 Total 28,5

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Bachelor's Thesis 25,5 Special Chapters of Higher Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Technique of Experimental Researches 4 Pedagogical Practical Training 6



___________________________________________________________________________ www.kpi.ua 457

Speciality: Electronic Household Appliances


First Year









Total 30 Total 31,5

Second Year







Total 30,5 Total 31


___________________________________________________________________________ 458 GENERAL CATALOG 2009-2010

Third Year







Basics of Electrodynamics 5 Physical and Theoretical Basics of Design 3

Production of Electronic Equipment 6

Standardization and Certification of Production 1,5

Componentry of Electronic Equipments 6 Life Safety and Labour Protection 3,5


Radio Measurements 2,5

Power Supply for Domestic Electronic Equipment 2

Radio Receiving and Amplifying Devices 5

Analog Circuitry 2 Elective Courses


Total 29 Total 37


___________________________________________________________________________ www.kpi.ua 459

Fourth Year


Foreign Language of the Professional Direction 2 Political Science 1,5 Physical and Theoretical Basics of Design 5,5 Science of Law 1,5 Economics and Organization of Production 4


Microprocessors in Electronic Equipments 6 Labour Protection 1,5 Devices for Information Recording and Reproduction 3,5


Basics of CAD 4,5 Graduation Thesis Projecting 1,5

Devices for Information Recording and Reproduction 1

Basics of Digital Signals Processing 4

Elective Courses

Optoelectronic Devices 3 Computer Simulation of Circuits, Constructions and Technologies 3







Electronic Equipment of Banking Systems 2




Total 7 Total 8,5


___________________________________________________________________________ 460 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electronic Household Appliances

Fifth Year


Foreign Language 2

Technology and Automation of Domestic Radioelectronic Equipment 3

Labour Protection in the Branch 1,5 Optimization of Design Solutions 2 Technical and Economic Feasibility of Engineering Decisions 2,5

Devices and Equipment of Modern Consumer Equipment 3

Design of Domestic Radioelectronic Equipment 6

Diagnostics, Repair and Adjustment of Domestic Radioelectronic Equipment 4

Service and Display Facilities of Domestic Radioelectronic Equipment 2 Antennas 4 Basics of Television and TV Systems 4

Acoustical Systems of Domestic Radioelectronic Equipment 2

CAD of Domestic Radioelectronic Equipment 4 Intellectual Property 1 Technology and Automation of Domestic Radioelectronic Equipment 4

Elective Courses Information Security Devices in Electronic Equipment 2


Basics of Business 2 Total 28 Total 24,5

Sixth Year


Pregraduation Practical Training 6 Pregraduation Practical Training 6 Graduation Thesis Projecting 10,5 Graduation Thesis Projecting 10,5

Total 33 Total


___________________________________________________________________________ www.kpi.ua 461

Degree Structure for Master of Electronic Household Appliances

Fifth Year



Foreign Language 2 Science of Patent and Copyright 2


Labour Protection in the Branch 1,5

Technology and Automation of Domestic Radioelectronic Equipment 4



Service and Display Facilities of Domestic Radioelectronic Equipment 2

Devices and Equipment of Modern Consumer Equipment 3,5

CAD of Domestic Radioelectronic Equipment 4

Diagnostics, Repair and Adjustment of Domestic Radioelectronic Equipment 4

Basics of Television and TV Systems 4

Acoustical Systems of Domestic Radioelectronic Equipment 2

Design of Domestic Radioelectronic Equipment 6 Intellectual Property 1 Technology and Automation of Domestic Radioelectronic Equipment 3,5



Elective Courses



Basics of Business 2

Total 30 Total 27


___________________________________________________________________________ 462 GENERAL CATALOG 2009-2010

Sixth Year


Pedagogics of Higher School 1,5 Preparation of Graduation Thesis 25,5 Special Chapters of Higher Mathematics 2 Special Chapters of Physics 2 Special Chapters of Informatics 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Technique of Experimental Researches 4 Pedagogical Practical Training 6


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF WELDING

___________________________________________________________________________ www.kpi.ua 463

Faculty of Welding

Faculty of Welding was founded in 1948; it became a part of the Mechanical Faculty in 1955. It was restructured as a faculty in 1975. Its foundation was initiated by the president of the National Academy of Sciences of Ukraine academician Boris Paton. The faculty is the biggest in Ukraine and one of the biggest in the world (after university of Ohio in the USA) center of teaching of specialists in the field of welding and related technologies. The teaching process is provided in a close collaboration with E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine.

The Faculty trains specialists skilled both in mechanical and electrical sciences, after graduation they are qualified as electricians. Number of subjects to study for being a specialist of welding is larger than the one for degree obtaining at any other faculty of the University.

Future specialists are trained to maintain the welded product’s whole living cycle, starting from design of the welded construction itself and technology development through the equipment, monitoring and control systems choice or design up to repairing works and utilization.

During the studies students take part in scientific and research activity which is provided together with Paton Electric Welding Institute in the fields of:

- welding materials and technologies development; - surfacing and restoration of machine parts, - magnetic control of welding processes, - automation of welding processes.

http://weld.kpi.ua


___________________________________________________________________________ 464 GENERAL CATALOG 2009-2010

Speciality: Welding Technology and Equipment

Degree Structure for Bachelor of Welding

First Year


Foreign Language 4 Foreign Language 4 Philosophy 2 (Ethics, Aesthetics, Logic and Science of Religion) 1 Science of Culture 1

History of Ukraine 1,5

Mathematics-2. Integral Calculus and Differential Equations, Numerical and Functional Series 5

Mathematics-1. Analytic Geometry and Differential Equations 7

Physics-2. Electricity and Magnetics 3

Chemistry 5 Engineering and Computer Graphics-2. Engineering Graphics 2


Engineering Mechanics-1. Statics and Kinematics 4


Informatics and Programming-2. Computer science software 2

Informatics and Programming-1. Computer Science Hardware 2

Electrical Engineering-1. Electric and Magnetic Circuits 4

Technology of Metal Production 3 Physical Metallurgy and Heat Treatment of Welded Joints 5

Introduction to Mathematical Analysis-1 1,5

Introduction to Mathematical Analysis-2 1,5

Total 33 Total 31,5


___________________________________________________________________________ www.kpi.ua 465

Second Year



Philosophy-1 2,5 Electrical Engineering-3. Electronic and Circuit engineering 2

Mathematics-3. Multiple Integrals and Complex Variable Functions 4

Strength of Materials-2. Methods of Strength Analysis, Stiffness, Steadiness and Shift Calculation 3

Engineering and Computer Graphics-3. Computer Graphics 1,5 Ecology 2

Engineering Mechanics-2. Dynamics 3

Welding Physics-2. Welding Physical-chemical and Metallurgical Processes 3

Electrical Engineering-2. Electromechanical Systems 4

Fusion Welding Technology and Equipment-1. Fusion Welding Processes and Equipment 3

Strength of Materials-1. Theory of Mode of Deformation 4 Welding Power Supplies 3,5

Interchangeability, Standardization and Technical Measurement 3

Basics of Sputtering and Welding Deposition-1. Basics of Welding Deposition 4

Welding Physics-1. Welding Heat Sources and Thermal Processes 4,5 Gas-thermal Material Treatment 4,5 Probabilistic Schemes in Engineering 1,5 Manual Arc Welding 4,5

Total 31 Total 32,5


___________________________________________________________________________ 466 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2 Foreign Language 1,5 Economics 2 Sociology 1,5

Hydraulics and Hydro-Pneumatic Leads 1,5 Psychology 1,5 Machine Parts-1. Machine Parts 4,5 Machine Parts-1. Machine Parts 0,5

Fusion Welding Technology and Equipment-2. Fundamentals of Constructional Materials' Welding 4

Machine Parts-2. Applied Mechanics 3

Basics of Sputtering and Welding Deposition-2. Basics of sputtering 4

Pressure Welding Technology and Equipment 4

Welding Tensions and Deformations 4 Welding of Special Materials 5 Labour Protection and Life Safety 3,5 Welding of Plastics 2

Weldability of Constructional Materials 3 Brazing and Soldering 4,5 Quality Systems in Welding 1,5 Electric Current Converters 4

Marketing of Small-Size Enterprises 3

Total 30 Total 30,5

Fourth Year


Foreign Language 1,5 Welding Consumables 3

Science of Law 1,5 Precision of Welded Constructions' Production 3,5


Welded Constructions Production-2. Mechanical Equipment for Welding Production 4

Welded Constructions Production-1. Welded Constructions Production 7,5

Operational Management in Welding Production 4

Welded Constructions Designing 4 Pregraduation Practical Training 4,5 Quality Control in Welding 4 Preparation of Graduation Thesis 9 Welding Deposition 3

Economics and Industrial Engineering of Welding Production 3 Automated Control in Welding 4

Total 30 Total 28


___________________________________________________________________________ www.kpi.ua 467

Degree Structure for Specialist of Welding Technology and Equipment

Fifth Year



Mechanical Equipment for Welding Production 2,5

Administration, Monitoring and Planning of Welding Production 3,5

Designing of Technological Processes of Welding Production 2,5

Mechanical Equipment for Welding Production 1,5

Designing of Welded Constructions 4 Designing of Technological Processes of Welding Production 1

Marketing 1,5 Labour Protection 1

Computer-Aided Design in Welding 5

Quality Monitoring in Welding Production 3

Electric Current Converters-1 4 Electric Current Converters-2 3,5 Welding Deposition 4,5 Sociology of Engineering Work 1,5

Intellectual Property 1 Operational Management in Welding Production 3

Welding of Plastics 1,5 Rhetoric 1,5

Welding Consumables 2 Medical and Social Basics of Health 1,5

Total 28,5 Total 21

Sixth Year



Pregraduation Practical Training 12 Preparation of Master's Thesis 21

Total 33 Total


___________________________________________________________________________ 468 GENERAL CATALOG 2009-2010

Degree Structure for Master of Welding Technology and Equipment

Fifth Year



Welding Deposition 4,5 Pedagogics of Higher School 1,5

Mechanical Equipment for Welding Production 2,5 Basics of Scientific Researches 2

Designing of Technological Processes of Welding Production 2,5



Experimental Research Methods in Welding 3

Marketing 1,5 Basics of Solid-State Physics 3,5

Intellectual Property 1 Mechanical Equipment for Welding Production 1,5

Scientific Research 6,5 Designing of Technological Processes of Welding Production 1

Electric Current Converters-1 4 Labour Protection 1

Quality Monitoring in Welding Production 3

Scientific Research 6,5 Electric Current Converters-2 3,5 Sociology of Engineering Work 1,5

Total 27,5 Total 31

Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Mathematical Computer Simulation Techniques of Systems and Processes 3

Basics of Society's Sustainable Development 2 Welding of Plastics 1,5 Welding Consumables 2 Science of Patent and Copyright 2 Scientific Research 6,5



___________________________________________________________________________ www.kpi.ua 469

Speciality: Welding Industrial Systems


First Year




Philosophy 2 (Ethics, Aesthetics, Logic and Science of Religion) 1 Science of Culture 1








Engineering and Computer Graphics - 1: Descriptive Geometry 3

Informatics and Programming-2. Computer Science Software 2

Informatics and Programming-1. Computer Science Hardware 2



Methods of Data Processing 1,5 Introduction to mathematical analysis-2 1,5

Total 33 Total 31,5


___________________________________________________________________________ 470 GENERAL CATALOG 2009-2010

Second Year




Philosophy-1 2,5 Electrical Engineering-3. Electronic and Circuit engineering 2




Engineering Mechanics-2. Dynamics 3

Welding Physics-2. Welding Physical-Chemical and Metallurgical Processes 3






Welding Physics-1. Welding Heat Sources and Thermal Processes 4,5 Gas-thermal Material Treatment 4,5 Computer Applied Problem Solution 2,5 Manual Arc Welding 4

Total 32 Total 32


___________________________________________________________________________ www.kpi.ua 471

Third Year



Foreign Language 2 Foreign Language 1,5 Economics 2 Sociology 1,5 Hydraulics and Hydro-Pneumatic Leads 1,5 Psychology 1,5 Machine Parts-1. Machine Parts 4,5 Machine Parts-1. Machine Parts 0,5

Fusion Welding Technology and Equipment-2. Fundamentals of Constructional Materials' Welding 4




Welding Tensions and Deformations 4 Technical Means of Automation 5 Labour Protection and Life Safety 3 Theory of Automatical Monitoring 5 Perspective Welding Technologies and Equipment 2

Mechanical Equipment for Welded Constructions' Production 3

Metrology and Technical Measurement 2,5 Electric Leads 5,5


Fourth Year



Foreign Language 1,5

Designing of Technical Means for Automation of Welding Industrial Systems 3,5

Science of Law 1,5 Microprocessor-Based Control Systems 5

Political Science 1,5 Technological Equipment 2 Pressure Welding Machines and Systems 4

Welding Industrial Systems' Production 3

Basics of Probability Theory 2,5 Electrotechnical Materials 2 Quality Control 4 Pregraduation Practical Training 4,5 Design of Construction Units and Devices of Welding Industrial Systems 5 Preparation of Graduation Thesis 9 Economics and Industrial Engineering of Welding Production 3 Technological Equipment 3 Automated Control in Welding 4

Total 30 Total 29


___________________________________________________________________________ 472 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Welding Industrial Systems

Fifth Year



Designing of Technical Means of Automation for Welding Industrial Systems 3

Administration, Monitoring and Planning of Welding Industrial Systems' Production 3,5

Product Quality Monitoring 2,5 Labour Protection 1,5 Robots, Welding Assembling Units and Machines and Welding Lines 5,61

Robots, Welding Assembling Units and Machines and Welding Lines 6,39

Elecro-Mechanical Medical Equipment 2,5 Intellectual Property 1 Computer-Aided Design in Welding 3


Marketing 2,5 Designing of Welding Power Supplies 2

Automatic Control and Monitoring of Welding 2

Perspective Welding Technologies and Equipment 2,5

Production of Welding Industrial Systems 2,5 Sociology of Engineering Work 1,5

Repairing and Adjustment of Welding Power Supplies and Industrial Systems 1,5 Rhetoric 1,5 Medical and social bases of health 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 473

Degree Structure for Master of Welding Industrial Systems



Control Units of Welding Industrial Systems 3 Pedagogics of Higher School 1,5 Product Quality Monitoring 2,5 Basics of Scientific Researches 2 Robots, Welding Assembling Units and Machines and Welding Lines 5,61



Experimental Research Methods in Welding 3

Research Work 4,5 Labour Protection 1,5 Production of Welding Industrial Systems 2,5 Intellectual Property 1

Marketing 3 Robots, Welding Assembling Units and Machines and Welding Lines 6,39


Research Work 4,5

Perspective Welding Technologies and Equipment 2,5


Sixth Year



Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Mathematical Computer Simulation Techniques of Systems and Processes 3


Basics of System Identification 2,5 Prediction of Welding Industrial Systems' Reliability 2

Applied Analysis of Experimental Data 2,5

Science of Patent and Copyright 2 Special Fusion Welding Processes 2 Special Pressure Welding Processes 2 Research Work 5



___________________________________________________________________________ 474 GENERAL CATALOG 2009-2010

Speciality: Technology and Equipment of Restoration

and Wear Resistance Increase of Machines and Constructions


First Year




Philosophy 2 (Ethics, Aesthetics, Logic and Science of Religion) 1 Science of Culture 1









Informatics and Programming-2. Computer Science Software 2

Informatics and Programming-1. Computer Science 2



Introduction to Speciality 1,5 Total 33 Total 30


___________________________________________________________________________ www.kpi.ua 475

Second Year




Philosophy-1 2,5 Electrical Engineering-3. Electronic and Circuit Engineering 2




Engineering mechanics-2. Dynamics 3

Welding Physics-2. Welding Physical-Chemical and Metallurgical Processes 3






Welding Physics-1. Welding Heat Sources and Thermal Processes 4,5 Gas-Thermal Material Treatment 4,5

Repairing by Welding 3

Computer Accessories for Restoration and Hardening Processes 4

Total 32,5 Total 32


___________________________________________________________________________ 476 GENERAL CATALOG 2009-2010

Third Year


Foreign Language 2 Foreign Language 1,5 Economics 2 Sociology 1,5 Hydraulics and Hydro-Pneumatic Leads 1,5 Psychology 1,5 Machine Parts-1. Machine Parts 4,5 Machine Parts-1. Machine Parts 0,5 Fusion Welding Technology and Equipment-2. Fundamentals of Constructional Materials' Welding 4




Welding Tensions and Deformations 4

Triboengineering and Basics of Machines' and Constructions' Reliability 4

Labour Protection and Life Safety 3,5 Technology of Surface Hardening 5,5

Theoretical Fundamentals of Surface Engineering 7,5

Computer Data Systems of Typical Technologies and Devices 4

Total 33 Total 25,5

Fourth Year


Foreign Language 1,5 Technology and Equipment for Welding Deposition 2

Science of Law 1,5 Machine Parts' and Constructions' Restoration 3

Political Science 1,5 Coated Surfaces' Mechanical Treatment 4

Equipment and Technology of Gas-Thermal Coating Production-1. Equipment for Gas-Thermal Coating Production 3

Equipment and Technology of Vacuum-Condensational Coating 5

Quality Control in Welding 4 Marketing of Small-Size Enterprises 3

Technology and Equipment for Welding Deposition 4,5 Pregraduation Practical Training 4,5 Machine Parts' and Constructions' Restoration 4 Preparation of Graduation Thesis 9 Economics Industrial Engineering of Welding Production 3 Automated Control in Welding 4

Total 27 Total 30,5


___________________________________________________________________________ www.kpi.ua 477

Degree Structure for Specialist of Technology and Equipment of Restoration and Wear Resistance Increase of Machines and Constructions

Fifth Year



Equipment for Coating Production 2,53

Administration, Monitoring and Planning of Restorative Production 3,5

Coating Engineering 4,5 Labour Protection 1

Technology and Equipment for Welding Deposition 3,06 Equipment for Coating Production 1,97

Marketing 1,5 Technology and Equipment for Welding Deposition 2,94

Computer-Aided Design in Restorative Production 5 Technology of Coating Production 4

Machine Parts Restoration 2,94 Technological Equipment for Coating Production 4

Computer-Aided Designing 1,92 Machine Parts Restoration 2,56 Intellectual Property 1 Computer-Aided Designing 1,58 Sociology of Engineering Work 1,5 Experimental Research Methods 2 Rhetoric 1,5

Medical and Social Basics of Health 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 478 GENERAL CATALOG 2009-2010

Degree Structure for Master of Technology and Equipment of Restoration and Wear Resistance Increase of Machines and Constructions

Fifth Year


Surface Engineering 4,5 Pedagogics of Higher School 1,5 Technology of Welding Deposition 4 Basics of Scientific Researches 2 Thermal and Mechanical Processes in Restoration of Parts and Constructions 2


Scientific Research 6,5 Experimental Research Methods in Welding 3

Intellectual Property 1 Basics of Solid-State Physics 3,5 Innovation Processes of Surface Engineering 2,5 Surface Engineering 3

Computer Simulation in Surface Engineering 1,5

Labour Protection 1

Applied Dynamics of Concentrated Energy Flows 1,56

Thermal and Mechanical Processes in Restoration of Parts and Constructions 1

Basics of Measurement and Testing 1,61 Scientific Research 6,5 Equipment for Welding Deposition 4

Innovation Processes of Surface Engineering 1

Sociology of Engineering Work 1,5 Total 20,5 Total 35,67

Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Preparation of Master's Thesis 25,5 Mathematical Computer Simulation Techniques of Systems and Processes 3 Basics of Society's Sustainable Development 2 Computer Simulation in Surface Engineering 2 Applied Dynamics of Concentrated Energy Flows 1,44 Science of Patent and Copyright 2 Basics of Measurement and Testing 2,39 Scientific Research 6,5


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF AIRCRAFT AND SPACE SYSTEMS

___________________________________________________________________________ www.kpi.ua 479

Faculty of Aircraft and Space Systems

Faculty of Aircraft and Space Systems was founded in May 1993 according to “KPI” Scientific Council resolution.

The main field of scientific activity is the development of principles and constructions of measuring and control equipments, devices and systems for the moving object control and communication. The Departments pursue their investigations and training engineers in cooperation with research institutes such as “Experimental exploration automation”, “Mechanical Problems “RHYTHM”, “TOR”, “Information and measurement facilities”.

The Faculty maintains close relationships with many foreign higher education institutions and famous companies of USA, Germany, China, France, Great Britain, Finland, Poland, Italy, Canada, Switzerland, Austria, Brazil, Russia, Ireland and Spain. Among them are Stuttgart, Munich and Bremen universities, the North-southern University of China, Hewlett Packard companies, National Instruments, Motorola, RohdeSchwarz, Academy of space engineering of China. Every year the best students have a practical training in Germany, France and other countries. The Faculty maintains close relationships with students’ community of aerospace higher education institutions “Evroavia”.

http://faks.kpi.ua


___________________________________________________________________________ 480 GENERAL CATALOG 2009-2010

Speciality: Information and Measurement Systems

Degree Structure for Bachelor of Metrology, Information and

Measurement Technologies


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy-2 1 Higher Mathematics-1. Differential Equations. Analytic Geometry. Linear Algebra 9


Physics-1. Mechanics. Molecular Physics. Electrostatics 7

Physics-2. Magnetism. Optics. Atomic Physics 5

Chemistry 3

Computer Science and Programming-2. Programming in Turbo Pascal System. Databases 6,5


Technical Mechanics-1. Basics of Theory and Designing of Measurement Technological Means Mechanisms 5,5

Computer Engineering and Programming-1. Basics of Computer Science 3,5

Components and Materials of Information and Measurement Systems 2

Total 31 Total 30,5


Course Title Credit Course Title Credit Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics-3. Differential Equations. Analytical Functions 7 Philosophy-1 2,5 Computer Engineering and Programming-3. Programming Packages and Systems 4

Theory of Electrical Signals and Circles-2. Transient Processes 5

Ecology 2

Metrology and Measurement-1. Basics of Metrology and Measurement 6

Technical Mechanics-2. Basics of Theory and Designing of Measurement Technology Means Mechanisms 1 Computer Modelling 4 Electrotechnical Devices of Information and Measurement Systems 5

Electronic Devices of Information and Measurement Technology-1. Analogue Electronic Devices 8

Special Chapters of Mathematics 3 Theory of Electrical Signals and Circles-1. Circles' Analysis 6

Elective Courses Design Automatization 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 481

Third Year


Foreign Language-3 2 Foreign Language -3 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Metrology and Measurement-2. Metrology of Measurement Technology Means 4 Practical Training 4,5

Measuring Converters 7

Measurement Methods and Means-1. Measurement of Electric and Magnite Quantities 6

Electronic Devices of Information and Measurement Technology-2. Impulse and Digital Electronic Equipment 7 Introduction to Theory of Systems 3

Measurement Methods and Means-1. Measurement of Electric and Nonelectric Quantities 3

Electronic Devices of Information and Measurement Technology-2. Impulse and Digital Electronic Equipment 0

System Programming 5 System Measurement Devices-1 6

Elective Courses Basics of Standardization and Certification 4 Special Issues of Measurement 3

Total 30 Total 35

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Economics and Organization of Production 3 Basics of Management 1,5 Foreign Language of the Professional Direction 1,75


Measurement Methods and Means 4 Labour Protection 1,5 Introduction to Theory of Systems 3 System Measurement Devices 3 System Measurement Devices 4,5 Microprocessor Systems 2,92

4,08 Information and Measurement Systems 2,5

Systems of Measurement Information Exchange (English Language) 2

Systems of Measurement Information Exchange (English Language) 1,5

Elective Courses

Basics of Radio Engineering and Connection 4

Design Automatization 4,5 Total 26,33 Total 26,67


___________________________________________________________________________ 482 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Information and Measurement Systems

Fifth Year



Marketing 1,5 Foreign Language 2 Intellectual Property 1 Labour Protection 1

Information and Measurement Systems 5,5 System Measurement Devices 3

Design Automatization 3 Information and Measurement Systems 0

Structural and Algorithmic Methods 4

Modelling and Fundamentals of Identification 4,5

Fundamentals of Experiment Theory 4

Digital Systems of Data Transmission 4

Digital Signals Processing 5 Control Systems of Databases 3,5

Metrology and Reliability of Information and Measurement Systems 3,5

Elective Courses

Special Issues of Information and Measurement Systems 4

Special Issues of System Measurement Devices 3,5

Total 28 Total 25

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 483

Degree Structure for Master of Information and Measurement Systems

Fifth Year


Marketing 1,5 Pedagogics of Higher School 1,5 Intellectual Property 1 Foreign Language 2 System Measurement Devices 3 Labour Protection 1 Information and Measurement Systems 5,5 Basics of Scientific Researches 2

Automatization of Design 3 Information and Measurement Systems 0

Structural and Algorithmic Methods 4 Basics of Experiment Theory 4

Digital Signals Processing 5 Modelling and Basics of Identification 4,5

Digital Systems of Data Transmission 3

Control Systems of Databases 4

Metrology and Reliability of Information and Measurement Systems 3,5

Elective Courses Special Issues of Information and Measurement Systems 4

Special Issues of System Measurement Devices 3,5

Total 27 Total 29

Sixth Year




Scientific Researches and Preparation of Master's Thesis 25,5


Basics of Society Sustainable Development 2

Special Issues of Information and Measurement Systems 6,5 Computer Measurement Means 7

Multilevel Systems of Information Processing 6,5



___________________________________________________________________________ 484 GENERAL CATALOG 2009-2010

Speciality: Metrology and Measurement Technology

Degree Structure for Bachelor of Metrology, Information and

Measurement Technologies


Course Title Credit Course Title Credit Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1 Philosophy-2 (Ethics, Aesthetics, Logic and Religion Science) 1

Chemistry 3 Physics-2. Magnetism. Optics. Nuclear Physics 5



Physics-1.Mechanics. Molecular Physics. Electrostatics 7

Computing and Programming-2. Information Technologies in Occupational Field 5,5

Higher Mathematics-1. Differential Equations. Analytic Geometry. Linear Algebra 9

Computing and Programming-3. Visual and Object-Oriented Technologies 2

Computing and Programming-1. Basics of Electronics Measurements Formation and Architecture 2,5

Technical Mechanics-1 Basics of Theory and Design of Mechanisms for Measurement Technology Means 5,5

Electrical Engineering Materials 2 Total 30 Total 31,5

Second Year


Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics-3. Differential Equations. Analytical Functions 7 Philosophy-1 2,5 Computing and Programming-4. Information Systems. Databases 5

Theory of Electrical Signals and Circles 6

Ecology 2

Metrology and Measurement-1. Basics of Metrology and Measurement 6

Technical Mechanics-2. Building of Mechanisms for Measurement Technology Means 1 Computer Designing 4

Electrical Engineering 5,5 Electronic Devices of Information and Measurement Technology 8

Mathematical Statistics 3 Theory of Electrical Signals and Circles-1. Theory of Signals 4,5

Elective Courses Systems of Automated Control 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 485

Third Year


Psychology 1,5 Foreign Language of the Professional Direction-3 4

Sociology 1,5 Economic Theory 2 Foreign Language of the Professional Direction-3 0 Life Safety and Labour Protection 3,5 Metrology and Measurement-2. Metrology of Measurement Technology Means 4 Practical Training 4,5

Measuring Converters 7

Electronic Devices of Information and Measurement Technology-2. Impulse and Digital Electrical Engineering 0

Electronic Devices of Information and Measurement Technology-2. Impulse and Digital Electrical Engineering 7

Measurement Methods and Means-2. Measurement of Electrical and Magnetic Quantities 6

Measurement Methods and Means-1. Measurement of Electrical and Nonelectrical Quantities 3 Digital Processing of Signals 6

Microcontrollers and One-chip Microelectronic Computers 6,5

Measurement Devices 1. Analogue Measurement Devices 2,5

Elective Courses Programming Languages. System Programming 4 Basics of Data and Knowledge 3

Total 28 Total 38


___________________________________________________________________________ 486 GENERAL CATALOG 2009-2010

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Economics and Organization of Production 3 Basics of Management 1,5 Foreign Language of the Professional Direction-3 2

Foreign Language of the Professional Direction-3 2

Measurement Methods and Means 4 Basics of Control and Technical Diagnostics 2,5

Methods and Signals Processing Technology 3 Labour Protection 1,5 Analogue Measurement Devices 4,5 Digital Measurement Devices 6

Information and Measurement Complexes 4,5

Elective Courses

Programming Languages. 3

Additional Chapters of Mathematics and Basics of Fuzzy Logic 2,25

Systems of Artificial Intelligence and Expert Systems 3

Microcontrollers and One-chip Microelectronic Computers 4,5

Additional Chapters of Mathematics and Basics of Fuzzy Logic 2,25



___________________________________________________________________________ www.kpi.ua 487

Degree Structure for Specialist of Metrology and Measurement Technology


Course Title Credit Course Title Credit Intellectual Property 1 Foreign Language-2 2

Marketing 1,5 Intellectual Means of Measurement Technology 4,11

Digital Signal Processors 4 Local Networks 3

Monitoring and Forecasting System 4,5 Measurement Assurance of Intellectual Measurement 6

Designing of Systems with Microcomputers 4,5 Labour Protection in the Branch 1

Systems of Images Identification 3 Software of Intellectual Measurement Means 3,5

Basics of Scientific Researches and Experiment Planning 3 Intellectual Means of Measurement Technology 3,89

Elective Courses

Designing of Monitoring and Forecasting Systems 2,5

Reliability, Construction and Technology of Measurement Technology Means 3,4



Sixth Year



Preproduction Practical Training 12 Graduation Thesis Projecting 19,44 Graduation Thesis Projecting 1,56



___________________________________________________________________________ 488 GENERAL CATALOG 2009-2010

Degree Structure for Master of Metrology and Measurement Technology

Fifth Year


Intellectual Property 1 Pedagogics of Higher School 1,5 Marketing 1,5 Foreign Language 2

Digital Signal Processors 4 Intellectual Means of Measurement Technology 4,28

Monitoring and Forecasting Systems 4,5 Local Networks 3 Designing of Systems with Microcomputers 4,5

Measurement Assurance of Intellectual Measurement Means 6

Systems of Images Identification 3 Labour Protection in the Branch 1 Basics of Scientific Researches and Experiment Planning 3

Software of Intellectual Measurement Means 3,5

Intellectual Means of Measurement Technology 3,72

Elective Courses

Designing of Monitoring and Forecasting Systems 2,5




Sixth Year



Analysis and Data Processing in Experimental Researches 0,94

Science of Patent and Copyright 2 Scientific Research and Preparation of Master's Thesis 25,5

Basics of Society's Sustainable Development 2 Artificial Intelligence and Expert Systems 5 Technologies in Metrology and Measurement Technology 5 Intellectual Measurement Means 6 Analysis and Data Processing in Experimental Researches 5,06



___________________________________________________________________________ www.kpi.ua 489

Speciality: Aircrafts and Helicopters

Degree Structure for Bachelor of Aircraft and Rocket Construction

First Year


Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy 2 1 Higher Mathematics-1. Differential Equations. Analytic Geometry. Linear Algebra 9


Physics-1.Mechanics. Molecular Physics. Electrostatics 7

Physics-2. Magnetism. Optics. Nuclear Physics 5

Chemistry 3

Engineering and Computer Graphics 2. Computer-Aided Drafting 1

Engineering and Computer Graphics 1. General Course 4

Theoretical Mechanics-1. Statics. Cinematics 5

Informatics 3

Programming and Software Envelopes-1. Basics of Programming 4,5

Electrical Engineering 3

Basics of Aviation and Cosmonautics, General Construction of Aircrafts 2

Total 30 Total 32


Course Title Credit Course Title Credit Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics-3. Differential Equations. Analytic Functions 7 Philosophy-1 2,5 Theoretical Mechanics-2. Dynamics 5

Theory of Mechanisms and Machine Parts-2. Machine Parts 3

Ecology 2

Strength of Materials-2. Rigidity and Durability of Complex Resilient Systems

Theory of Mechanisms and Machine Parts-1. Theory of Mechanisms 4 Applied Mathematics 5 Strength of Materials-1. General Course 4

Aerodynamics-1. Aerodynamics. Subsonic Aerodynamics. 6

Programming and Software Envelopes-2. Software Envelopes 5,5

Methods of Three-Dimensional Modelling 3

Material Science, Construction Materials and its Technologies 5



___________________________________________________________________________ 490 GENERAL CATALOG 2009-2010

Third Year


Psychology 1,5 Foreign Language-3 2 Sociology 1,5 Economic Theory 2

Foreign Language-3 2 Construction of Aircrafts-2. Construction of Airplanes 5

Aerodynamics-2. Supersonic Aerodynamics 4 Life Safety and Labour Protection 3,5

Flight Dynamics 5 Thermodynamics and Heat Transmission 3

Aircraft Construction-1 Construction of Boosters and Aircraft Equipment 2 Practical Training 4,5 Environments of Automated Designing for Devices and Systems 5

Designing and Construction of Aircrafts 1

Structural Mechanics of Aircrafts and Helicopters 5 Metrology and Standardization 4,5

Basics of Aircrafts and Energetic Motor Equipments Reliability 2,5

Construction of Aviation and Rocket Engines 3

Elective Courses Processing of Construction Materials 3 Systems of Aeronavigation 4

Total 29 Total 35


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Economics and Organization of Production 3 Basics of Management 1,5 Foreign Language of the Professional Direction 2


Aerohydrogasdynamics (Dynamics) and the Theory of Flying 2,5 Life Safety and Labour Protection 1,5 Aerodynamics of Airplane and Helicopter and Theoretical Aerodynamics 4,19 Experimental Aerodynamics 3 Applied Automated Designing 5,5 Preparation of Bachelor's Thesis 1,5

Elective Courses Basics of Aircrafts and Energetic Motor Equipments Reliability 1,5

Thermodynamics and Heat Transmission 1,17

Applied Hydraulic Gas Dynamics 1,5 Technology and Processing of Construction Materials 4,5

Thermodynamics and Heat Transmission 1,83

Basics of Technologies of Aircrafts Manufacturing and Energetic Motor Equipments 4,5

Applied Mechanics of Aircrafts Constructions 5



___________________________________________________________________________ www.kpi.ua 491

Degree Structure for Specialist of Aircrafts and Helicopters

Fifth Year



Marketing 1,5 Foreign Language 2 Intellectual Property 1 Experimental Aerodynamics 1,97

Testing and Certification of Airborne Equipment and Aircrafts 3 Systems for Aircrafts 4,94

Experimental Aerodynamics 2,03 Designing of Aircrafts' Elements in CAD, CAM, CAQ Systems 8,22

Systems for Aircrafts 9,56 Life Safety and Labour Protection 1

Designing of Aircrafts' Elements in CAD, CAM, CAQ Systems 5,28

Mathematical Methods of Modelling and System Analysis 4,5

Elective Courses

Optimal Design and Synthesis of Systems Aircrafts 3


Special Parts of Technical English Language 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 492 GENERAL CATALOG 2009-2010

Degree Structure for Master of Aircrafts and Helicopters


Course Title Credit Course Title Credit Marketing 1,5 Pedagogics of Higher School 1,5 Numerical Methods of Dynamics and Strength of Aircrafts 4 Foreign Language 2 Modern Technologies of Aircrafts' Manufacturing 6,61

Numerical Methods of Dynamics and Strength of Aircrafts 4


Modern Technologies of Aircrafts' Manufacturing 1,89

Automated Designing (CAD,CAM,CAQ) 4,97


Intellectual Property 1 Automated Designing (CAD,CAM,CAQ) 2,03

Labour Protection in the Branch 1

Life-support Systems and Life Saving Equipment 3,78


Mathematical Methods of Modelling and System Analysis 4

Basics of Scientific Researches 2 Elective Courses

Testing and Certification of Airborne Equipment and Aircrafts 3 Modern Development in Branch** 2 Basics of Scientific Experiment Theory 3


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Scientific Research on Subject 7,5 Science of Patent and Copyright 2 Preparation of Master's Thesis 24 Life-Support Systems and Life Saving Equipment 4,22 Computer Methods of Projecting of Systems Aircrafts 2 Mathematical Modelling of Systems and Processes 3 Modern Scientific Research in the Branch 1,5




___________________________________________________________________________ www.kpi.ua 493

Speciality: Operating Systems of Aircrafts and

Complexes

Degree Structure for Bachelor of Avionics


Course Title Credit Course Title Credit Foreign Language-1 2 Foreign Language -1 2 Ukrainian Language 1 History of Ukraine 1,5 Science of Culture 1 Philosophy 2 1 Higher Mathematics-1. Differential Equations. Analytic Geometry. Linear Algebra 9


Physics-1.Mechanics. Molecular Mechanics. Molecular Physics. Electrostatics 7

Physics-2. Magnetism. Optics. Atomic Physics 5

Chemistry 3 Engineering and Computer Graphics-2. Computer Graphics 1

Engineering and Computer Graphics-1. General Course 4

Theoretical Mechanics-1. Statics. Kinematics 5

Informatics 3

Fundamentals of Aviation and Cosmonautics and General Construction of Aircrafts 2

Electrical Engineering 3

Programming and Program Environments-1. Basics of Programming 4

Total 30 Total 31,5


Course Title Credit Course Title Credit Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics-3. Differential Equations. Analytical Functions 7 Philosophy-1 2,5

Theoretical Mechanics-2. Dynamics 5

Strength of Materials-2. Toughness and Durability of Complex Elastic Systems 5

Ecology 2 Applied Mathematics 5 Strength of Materials-1. General Course 4

Metrology, Standardization and Theory of Measurements 4

Programming and Program Environments-2. Program Environments 6

Material Science, Construction Materials and Its Technologies 5

Electronics of Measurement and Control Equipments 4

Automated Control in Technical Systems-1. General Course 4

Elective Courses Fluctuations in Technical Systems 2

Theory of Mechanisms and Machines Parts 2

Total 30 Total 31,5


___________________________________________________________________________ 494 GENERAL CATALOG 2009-2010

Third Year


Foreign Language-3 2 Foreign Language-3 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5 Automated Control in Technical Systems-2. Modern Methods 4

Aerohydrogasdynamics and Theory of Flight-2. Theory of Flight 5

Aerohydrogasdynamics and Theory of Aircrafts-1. Aerohydrogasdynamics 4 Practical Training 4,5 Measuring Converters-1. Theory and Calculation Methods of Measuring Converters 3

Measuring Converters-2. Designing of Measuring Converters 2

Sensors of Aircrafts' Operating Systems-1. Theory of Hydroscopes 9

Sensors of Aircrafts' Operating Systems-2. Laser Hydroscopes. Accelerometers 9

Calculating Facilities and Microprocessing Systems-1. Architecture of Microprocessor Systems 2

Elective Courses Environment of Devices and Systems Automated Designing 5

Technologies of Modern Machine-Building 2,5

Execution Units and Elements of Automation 4

Total 30 Total 36,5


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Economics and Organization of Production 3 Basics of Management 1,5 Foreign Language of the Professional Direction 1,89 Labour Protection 1,5

Sensors of Giro-Inertial Systems 6,28 Foreign Language of the Professional Direction 1,81

Technologies of Modern Machine-Building 4,5 Sensors of Giro-Inertial Systems 3,03 Calculating Facilities and Microprocessing Systems 3,08

Theory of Navigation Systems, Stabilization and Orientation 3

Construction Fundamentals of Aircrafts Control Systems 3

Preparation of Bachelor's Thesis 1,5

Calculating Facilities and Microprocessing Systems 2,92

Elective Courses Aerohydrogasdynamics (Dynamics) and Theory of Flight 3

Digital Systems of Automated Control 3,61

Digital Systems of Automated Control 2,89



___________________________________________________________________________ www.kpi.ua 495

Degree Structure for Specialist of Operating Systems of Aircrafts and

Complexes

Fifth Year



Marketing 1,5 Foreign Language 2 Intellectual Property 1 Labour Protection in Branch 1

Systems of Stabilization and Orientation 6

Mathematical Methods of Modelling and System Analysis 4,5

Aircraft Navigation Systems 3,39 Aircraft Navigation Systems 5,61 Control Systems for Aircrafts 5,28 Control Systems for Aircrafts 7,72

Testing and Certification of Airborne Equipment and Aircrafts 3

Applied Certification of Aircrafts' Airborne Equipment 2,39

Applied Certification of Aircrafts' Airborne Equipment 1,61

Elective Courses



Special Parts of Technical English Language 1,5


Sixth Year




Total 33 Total


___________________________________________________________________________ 496 GENERAL CATALOG 2009-2010

Degree Structure for Master of Operating Systems of Aircrafts and Complexes

Fifth Year


Marketing 1,5 Pedagogics of Higher School 1,5 Optimal Design and Synthesis of Systems Aircrafts 3 Foreign Language 2 Systems of Stabilization and Orientation 6 Labour Protection in the Branch 1

Aircraft Navigation Systems 4,22 Mathematical Methods of Modelling and System Analysis 4

Operating Systems of Aircrafts 5,56 Optimal Design and Synthesis of Systems Aircrafts 3

Intellectual Property 1 Aircraft Navigation Systems 4,78 Operating Systems of Aircrafts 6,44 Basics of Scientific Researches 2


Elective Courses Basics of Scientific Experiment Theory 3 Modern Development in Branch 2 Testing and Certification of Airborne Equipment and Aircrafts 3


Sixth Year


Philosophic Problems of Scientific Knowledge 1,5 Scientific Research on a Subject 7,5 Science of Patent and Copyright 2 Preparation of Master's Thesis 24 Basics of Society's Sustainable Development 2 Modern Techniques of Navigation and Control 1,5 Computer Methods of Projecting of Systems Aircrafts 2 Intellectual Systems of Control 1,5 Special Parts of Modern Theory of Automatic Control 1,5 Modern Scientific Research in Branch 1,5 Mathematical Modelling of Systems and Processes 3


NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF ELECTRONICS

___________________________________________________________________________ www.kpi.ua 497

Faculty of Electronics

Faculty of Electronics is powerful training center of future professionals in electronics branch, maintains collaboration with many educational institutions in Ukraine and abroad. It was founded in 1996. The Faculty consists of 8 departments.

Over 3500 students and postgraduates are studying at the faculty including 207 foreign residents.

Around 21000 engineers and masters, over 400 PhDs and 40 doctors were trained at the faculty.

175 people are working at the Faculty; among them are 2 academicians, 3 corresponding members of National Academy of Sciences of Ukraine, 30 professors and 85 doctors.

Scientific investigations in Electronics are aimed at research and solution of the following problems:

• designing and identification of the electronic components, circuits and signals;

• physical effects in media, dielectric and semiconductor materials and devices;

• manufacturing processes of Electronic article production; • electronic devices and systems; • information computer technologies and biomedical

engineering; • computer-aided design.

http://fel.kpi.ua


___________________________________________________________________________ 498 GENERAL CATALOG 2009-2010

Speciality: Microelectronics and Semiconductor Devices

Degree Structure for Bachelor of Micro and Nanoelectronics

First Year



Science of Culture 1 Philosophy-2. Science of Religion, Logic, Ethics and Aesthetics 1

Analytic Geometry 4,5 Mathematical Analysis-2 6,5

Mathematical Analysis-1 5 Computer Science. Programming and Language Algorithms 4

Computer Science. Computers and Basics of Programming 4 General Physics-2 6,5

General Physics-1 6,5 Engineering and Computer Graphics. Computer Graphics 4

Engineering and Computer Graphics. Engineering Graphics 2 Chemistry 3

Introduction to Speciality 1 Materials and Components of Electronics 3

Introduction of Measuring Technique 3

Total 30 Total 31,5

Second Year


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Mathematical Analysis-3 5,5 Philosophy-1 2,5 Ecology 2 Calculus Mathematics-2 3 Probabilistic Basics of Data Processing 5,5 Theory of Electronic Circuits-2 5,5 Calculus Mathematics-1 3 Statistical Physics 3,5 Quantum Mechanics 4,5 Solid State Physics 6 Theory of Electronic Circuits-1 5,5

Elective Courses Algorithms and Data Structure 2,5 Chemistry of Materials 4,5

Measurement of Materials Parameters 4

Total 30,5 Total 31


___________________________________________________________________________ www.kpi.ua 499

Third Year



Psychology 1,5 Foreign Language 2 Sociology 1,5 Economic Theory 2 Foreign Language 2 Solid State Electronics-2 5,5 Theory of Field 4 Analogue Circuit Engineering 6

Technological Basics of Electronics 3 Life Safety and Labour Protection 3,5

Solid State Electronics-1 5 Industrial Practical Training 4,5 Physics of Semiconductors 5 Vacuum and Plasma Electronics 4

Physics of Dielectrics 4 Modelling in Electronic Engineering 4

Theory of Signals 4 Elective Courses

Liquid Crystals 5

Total 30 Total 36,5

Fourth Year



Foreign Language 2 Foreign Language 2 Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5

Microprocessor Engineering 4 Physics of Semiconductor Devices and Integral Microcircuits-2 4

Power Electronics 4 Functional Electronics 6 Quantum Electronics 3 Optoelectronics 4,5 Digital Circuit Engineering 5,5 Electronic Systems 5

Economics and Organization of Production 3 Labour Protection 1,5

Physics of Semiconductor Devices and Integral Microcircuits-1 5 Preparation of Bachelor's Thesis 3,5

Elective Courses

Microelectronics of Microwave Frequency 3

Total 33,5 Total 30


___________________________________________________________________________ 500 GENERAL CATALOG 2009-2010


Microelectronics and Semiconductor Devices

Fifth Year




Marketing 1,5 Special Course of Microelectronics-2 3

Labour Protection in the Branch 1 Economics and Organization of Production 1,5

Microcircuitry 5 Special Course of Functional Electronics 3

Physical Basics of Reliability 4 Integral Optics 4

Technology of Semiconductor Devices and Integrated Circuits 4 Intellectual Property 1

Dielectric Units and Devices 4 Technologies and Integrated Circuits Modelling 3

Special Course of Microelectronics-1 3

Designing and Construction of Semiconductor Devices and Integrated Circuits 5

Elective Courses Basics of Experiment Planning 3,5

Additional Chapters of Projecting and Construction of Semiconductor Devices and Integrated Circuits 4

Total 23,5 Total 29

Specialization:

Signal Processing and Transformation 4

Systems of Digital Information Processing 3

Designing of Large Integral Microcircuits 4

Total 4 Total 7

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 501

Degree Structure for Master of

Microelectronics and Semiconductor Devices





Marketing 1,5 Technologies and Integrated Circuits Modelling 3

Labour Protection in the Branch 1 Special Course of Microelectronics-2 3

Microcircuitry 5 Economics and Organization of Production 1,5

Physical Basics of Reliability 4 Crystal Physics 4

Technology of Semiconductor Devices and Integrated Circuits 4

Designing and Construction of Semiconductor Devices and Integrated Circuits 5

Special Course of Microelectronics-1 3 Intellectual Property 1 Scientific Research on Subject 1 Scientific Research on Subject 1,5

Elective Courses

Additional Chapters of Projecting and Construction of Semiconductor Devices and Integrated Circuits 4



___________________________________________________________________________ 502 GENERAL CATALOG 2009-2010

Sixth Year


Science of Patent and Copyright 2 Pedagogical Practical Training 1,5 Pedagogics of Higher School 1,5 Preparation of Master's Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Elemental and Structural Analysis of Solid Body 3 Physics and Chemistry of Semiconductor Surfaces 3 Phase Transition in Solid 3 Basics of Crystal Chemistry 3 Dielectric Spectroscopy 3 Scientific Research on Subject 1,5 Pedagogical Practical Training 1,5

Elective Courses Actual Problems of Physics and Solid State Electronics 3,5

Total 30 Total 27


___________________________________________________________________________ www.kpi.ua 503

Speciality: Physical and Biomedical Electronics

Degree Structure for Bachelor of Micro and Nanoelectronics

First Year



Ukrainian Language 1 Foreign Language 2 Science of Culture 1 History of Ukraine 1,5

Foreign Language 2 Philosophy 2. Science of Religion, Ethics, Aesthetics 1

Analytic Geometry 4,5 Mathematical Analysis-2 6,5

Computer Science. Computers and Basics of Programming 4

Computer Science. Programming and Language Algorithms 4

Engineering Graphics 2 Computer Graphics 4 Introduction of Measuring Technique 4 General Physics-1 6,5 Chemistry 3

Materials and Components of Electronics 3


Second Year



Foreign Language 2 Philosophy-1 2,5 Mathematical Analysis-3 5,5 Foreign Language 2 Ecology 2 Calculus Mathematics-2 3

Probabilistic Basics of Data Processing 5,5 Theory of Electronic Circuits-2 6 Calculus Mathematics 3 Statistical Physics 3,5 Theory of Electronic Circuits-1 5 Solid State Physics 6 Quantum Mechanics 4,5 Methods of Mathematical Physics 4,5 Vacuum and Plasma Electronics 4

Elective Courses Studying Practical Training 2,5

Total 30 Total 31,5


___________________________________________________________________________ 504 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2 Foreign Language 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Solid State Electronics-2 5 Theory of Field 4 Life Safety 3,5

Technological Basics of Electronics 3 Circuit Engineering: Analogue Circuit Engineering 6

Solid State Electronics 5,5 Industrial Practical Training 4,5

Theory of Signals 4 Modelling in Electronic Engineering 4

Physics of Electronic Processes 6 Elective Courses

Methods of Signals Transformation 3 Electronic Sensors 3 Basics of Biomedical Knowledge 6

Total 30,5 Total 36

Fourth Year



Sociology 2 Science of Law 2 Psychology 2 Political Science 1,5 Digital Circuit Engineering 5,5 Electronics Systems 5 Quantum Electronics 3 Labour Protection 1,5

Microprocessor Engineering 4 Ultra High Frequency Electronic Circuits 4,5

Power Electronics 4 Foreign Language 2

Economics and Organization of Production 3 Preparation of Thesis 2 Foreign Language 2

Elective Courses

Ultrahigh Frequency Electronics 3 Technology of Physical Experiment 2,5

Basics of Information Technologies 3 Biometrics 3,5



___________________________________________________________________________ www.kpi.ua 505

Degree Structure for Specialist of Physical and Biomedical Electronics

Fifth Year



Foreign Language 1,03 Foreign Language 0,97 Biomedical Sensors 2,5 Microelectronic Devices 3

Iteration of Biological Objects with Physical Fields 4

Modelling of Biophysical Processes 3

Physics and Electronic Components Engineering 3

Designing of Biomedical Equipment 5

Radiation Physics Methods in Biomedicine 2,5 Biomedical Introscopy 3,5

Designing and Standardization of Biomedical Equipment 4


Marketing 1,5 Intellectual Property 1

Labour Protection in the Branch 1 Methods and Ways of Therapy and Rehabilitation 3

Methods and Ways of Diagnostics and Life Safety 3,5 Biomedical Computer Systems 3

Elective Courses

Methods and Ways of Diagnostics (Additional Chapters) 3

Microelectronic Devices (Additional Chapters) 2,5

Modelling of Biophysical Processes (Additional Chapters) 2


Specialization:

Vacuum Microelectronics 3,5 Functional Electronics 3

Ultra High-Speed Electronic Equipments 3

Total 3,5 Total 6

Sixth Year




Total 33 Total


___________________________________________________________________________ 506 GENERAL CATALOG 2009-2010

Degree Structure for Master of Physical and Biomedical Electronics



Foreign Language 1,03 Foreign Language 0,97


Biomedical Sensors 2,5 Microelectronic Devices 3 Iteration of Biological Objects with Physical Fields 4

Modelling of Biophysical Processes 3

Physics and Electronic Components Engineering 3

Designing of Biomedical Equipment 5

Radiation Physics Methods in Biomedicine 2,5 Biomedical Introscopy 3,5 Designing and Standardization of Biomedical Equipment 4

Methods and Ways of Therapy and Rehabilitation 3

Methods and Ways of Diagnostics and Life Safety 3,5 Biomedical Computer Systems 3

Marketing 1,5 Economics and Organization of Production 1,5

Labour Protection in the Branch 1 Intellectual Property 1 Scientific Research on Subject 1,33 Scientific Research on Subject 1,33

Elective Courses Methods and Ways of Diagnostics (Additional Chapters) 3 Dynamic Systems 1

Modelling of Biophysical Processes (Additional Chapters) 2


Specialization:

Vacuum Microelectronics 3,5 Functional Electronics 3

Ultra High-Speed Electronic Equipments 3

Total 3,5 Total 6


___________________________________________________________________________ www.kpi.ua 507

Sixth Year


Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Planning of Experiment 2,5 Telemedical Systems 2 Methods of Spectrum Analysis in Physics and Medicine 2,5 Self-Organization in Biosystems 2,5 Scientific Research on Subject 1,33 Pedagogical Practical Training 1,5

Elective Courses Scientific and Technical Creativity 1,5


Specialization:

Non-Linear Electronics 2,5 Total 2,5 Total


___________________________________________________________________________ 508 GENERAL CATALOG 2009-2010

Speciality: Electronic Devices and Equipment

Degree Structure for Bachelor of Electronic Devices and Systems

First Year



Science of Culture 1 History of Ukraine 1,5

Ukrainian Language 1 Philosophy 2. Science of Religion, Logic, Ethics, Aesthetics. 1

Foreign Language 2 Foreign Language 2 Analytic Geometry 4,5 Mathematical Analysis-2 6,5

Mathematical Analysis-1 5 Computer Science. Programming and Language Algorithms 4

Computer Science. Computers and Basics of Programming 4 General Physics-2 6,5


Engineering and Computer Graphics. Engineering Graphics 2 Chemistry 3


Materials and Components of Electronics 3

Total 30 Total 31,5

Second Year



Foreign Language 2 Philosophy-1 2,5 Mathematical Analysis-3 5,5 Foreign Language 2 Ecology 2 Calculus Mathematics-2 3 Calculus Mathematics-1 3 Theory of Electric Circuits-2 6

Probabilistic Basics of Data Processing 5,5 Solid State Electronics 6 Labour Protection 0 Vacuum and Plasma Electronics 3 Physical Basics of Electronics 3 Physical Electronics 3 Theory of Electric Circuits-1 6 Calculus Systems and Networks 6

Elective Courses

Programming and Algorithm Languages-2 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 509

Third Year


Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Devices of Digital Electronics 5 Theory of Field 5,5 Life Safety and Labour Protection 3,5 Solid State Electronics 4 Industrial Practical Training 4,5 Analysis and Measurement of Electronic Circuits 6 Theory of Signals 5 Technological Basics of Electronics 3

Modelling in Electronic Engineering 3

Electronics of Transducing Systems-1. Electronic and Ionic Optics 3,5

Electronics of Transducing Systems-1. Electronic and Radial Tools and Devices 5

Physical Electronics 3 Elective Courses

Applied Optics 3 Theory of Vibrations and Waves 3,5

Total 30 Total 36,5

Fourth Year


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Foreign Language of the Professional Direction 2


Economics and Organization of Production 3 Labour Protection 1,5 Digital Circuit Engineering 5,5 Electronic Systems 5 Quantum Electronics 3 Functional Electronics 4

Microprocessor Engineering 4 Systems of Ultra High Frequency 4

Power Electronics 4 Preparation of Thesis 2,5 Electronic-Radial Equipments and Devices 3 Equipments and Technique of Upper High Frequency 4,5

Elective Courses Laser Technique and Technology 3 Applied Electronics 2

Total 33 Total 27,5


___________________________________________________________________________ 510 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electronic Devices and Equipment

Fifth Year






Optoelectronics 4 Control Information Systems, Registration and Reflection 4

Measurement in Electronic Systems 4 Production Technology of Electronic Equipments 3,5

Designing and Construction of Electronic Systems 5,5 Optical Holography 3,5

Analysis, Synthesis and Modelling of Special Electronic Systems 5,5 Electronics in Ecology 2,5 Plasma Electronics 3 Cryogenic Electronics 2,5

Elective Courses Material Science in Electronics 3,5 Basics of Autocontrol Theory 4


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 511

Degree Structure for Master of Electronic Devices and Equipment

Fifth Year




Basics of Scientific Researches 2 Foreign Language 0,47



Optoelectronics 4 Control Information Systems, Registration and Reflection 4

Measurement in Electronic Systems 4 Production Technology of Electronic Equipments 3,5

Designing and Construction of Electronic Systems 5,5 Optical Holography 3,5 Analysis, Synthesis and Modelling of Special Electronic Systems 5,5 Cryogenic Electronics 2,5 Plasma Electronics 3

Elective Courses Material Science in Electronics 3,5 Basics of Autocontrol Theory 4


Sixth Year



Pedagogics of Higher School 1,5 Preparation of Thesis 25,5 Science of Patent and Copyright 2 Pedagogical Practical Training 1,5 Mathematical Methods of Optimization 3 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Modern Complex Electronic Devices and Systems of Ultra High Frequencies and Laser Technology 3 Electronics of Security Systems 3 Information Electronics 3 Scientific Research on Subject 4,5 Pedagogical Practical Training 1,5

Total 26,5 Total 27


___________________________________________________________________________ 512 GENERAL CATALOG 2009-2010

Speciality: Electronic Systems

Degree Structure for Bachelor of Electronic Devices and Systems


Course Title Credit Course Title Credit Science of Culture 1 History of Ukraine 1,5

Ukrainian Language 1 Philosophy-2 (Ethics, Esthetics, Science of Religion, Logic) 1

Foreign Language-1 2 Foreign Language-1 2 Analytic Geometry 4,5 Mathematical Analysis-3 6,5

Mathematical Analysis-1 5 Programming and Algorithm Languages 4

Personal Computers and Basics of Programming 4 General Physics-2 6,5 General Physics-1 6,5 Computer Graphics 4 Engineering Graphics 2 Chemistry 3

Introduction of Measuring Technique 4 Materials, Elements and Components of Electronics 3

Total 30 Total 31,5

Elective Courses:


Total 2 Total 2

Second Year



Foreign Language-2 2 Foreign Language -2 2 Mathematical Analysis-2 5,5 Philosophy -1 2,5 Ecology 2 Calculus Mathematics-2 3

Calculus Mathematics-1 3 Probabilistic Basics of Data Processing 5,5

Physical Basics of Electronics 3 Theory of Electronic Circuits-2 6 Theory of Electronic Circuits-1 6 Solid State Electronics 6 Object-Oriented Programming 3 Vacuum and Plasma Electronics 4

Elective Courses Information Technologies-1 4 Information Technologies-2 4

Total 28,5 Total 33

Elective Courses:


Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 513

Third Year


Course Title Credit Course Title Credit Psychology 1,5 Economic Theory 2 Sociology 1,5 Foreign Language 2 Foreign Language 2 Power Electronics 3 Theory of Field 5,5 Devices of Digital Electronics 5 Solid State Electronics 4 Life Safety 3,5 Information Theory and Signals Processing-1 3,5 Industrial Practical Training 4,5 Analysis and Measurement of Electronic Circuits 6

Information Theory and Signals Processing-2 3,5

Technological Basics of Electronics 3 Functional Electronics 3

Electromagnetic Technique-1 4 Modelling in Electronic Engineering 3

Electromagnetic Technique-2 4 Digital Information Systems 2

Total 31 Total 35,5

Elective Courses: Physical Training 2

Total 2 Total

Fourth Year


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Digital Circuit Engineering 5,5 Electronic Systems 5,5

Quantum Electronics 3 Microprocessor Control and Information Processing 5

Microprocessor Engineering 4 Autonomous Converters 5 Power Electronics 4 Digital Automatons 3,5 Economics and Organization of Production 3


Foreign Language of the Professional Direction 2,11 Labour Protection 1,5 Preparation of Thesis 2,5

Elective Courses

Automatization of Circuit’s Designing 4 Basics of Energy Saving 1,67

Basics of Energy Saving 1,83 Design Concepts of Electronic Systems 1,5



___________________________________________________________________________ 514 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Electronic Systems

Fifth Year




Basics of Autocontrol Theory 4

Designing and Technology of Electronic Equipments and Systems 2,94


Electronic Systems of Control and Regulation 4,5

Units of Information Reflection and Registration 4,5

Electric Supply Systems of Electronic Devices 3

Power Electronic Systems 4,5 Computer Networks and Systems 2,5

Specialized and Industrial Microprocessor Systems 4 Electronic Computer Systems 4,5

Marketing 1,5 Economics and Organization of Production 1,5

Labour Protection in the Branch 1 Intellectual Property 1 Elective Courses

Basics of Design Engineering 2 Computer Technologies 2,72 Computer Technologies 2,78


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 515

Degree Structure for Master of Electronic Systems




Basics of Scientific Researches 2 Foreign Language 0,97

Basics of Autocontrol Theory 4



Electronic Systems of Control and Regulation 4,5

Units of Information Reflection and Registration 4,5

Electric Supply Systems of Electronic Devices 3

Power Electronic Systems 4,5 Computer Networks and Systems 2,5 Specialized and Industrial Microprocessor Systems 4


Marketing 1,5 Intellectual Property 1 Labour Protection in the Branch 1 Scientific Research on Subject 1,11 Scientific Research on Subject 1,14

Elective Courses Basics of Design Engineering 2 Computer Technologies 2,72 Computer Technologies 2,78



Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Scientific Research on Subject 1,11 Science of Patent and Copyright 2 Pedagogical Practical Training 1,5 Mathematical Methods of Optimization 3 Preparation of Thesis 25,5 Mathematical Modelling of Systems and Processes 3 Basics of Society's Sustainable Development 2 Additional Chapters of Information Electronics 3 Additional Chapters of Power Electronics 3 Modern Trend of Computers and Microprocessor Systems 4 Design Concepts of Electronic Systems 1 Scientific Research on Subject 1,14 Pedagogical Practical Training 1,5



___________________________________________________________________________ 516 GENERAL CATALOG 2009-2010

Speciality: Manufacturing of Electronic Facilities


First Year



Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1

Philosophy 2. Science of Religion, Logic, Ethics, Aesthetics 1

Foreign Language 2 Foreign Language 2 Analytic Geometry 4,5 Mathematical Analysis-2 6,5 Mathematical Analysis-1 5 General Physics-2 6,5


Engineering and Computer Graphics. Engineering Graphics 2

Computer Engineering and Programming-2 4

Computer Engineering and Programming-1 4 Chemistry 3 Metrological Maintenance of Radioelectronic Apparatus 4

Probabilistic Basics of Data Processing 3

Total 30 Total 31,5

Second Year



Foreign Language 2 Foreign Language 2 Mathematical Analysis-3 5,5 Philosophy -1 2,5 Ecology 2 Basics of Radioelectronics-2 4,5

Basics of Electrodynamics 5 Materials Science and Materials of Electronic Apparatus-2 5,5

Basics of Radioelectronics-1 4 Electronic Devices Element Base-1 3,5 Materials Science and Materials of Electronic Apparatus-1 6,5 Calculus Mathematics 4 Computer Engineering and Programming (Additional Chapters) 5 Analogue and Digital Electronics 3,5

Elective Courses Functional and Logical Design 6

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 517

Third Year


Psychology 1,5 Foreign Language 2 Sociology 1,5 Economic Theory 2 Foreign Language 2 Life Safety and Labour Protection 3,5

Electronic Devices Element Base-2 3

Physical and Theoretical Fundamentals of Electronic Devices Designing 5

Analogue and Digital Electronics 6 Industrial Practical Training 4,5 Research of Electronic Apparatus Production-1 3

Research of Electronic Apparatus Production-2 3,5

Calculating and Microprocessor Means in Electronic Apparatus-1 6

Calculating and Microprocessor Means in Electronic Apparatus-2 4

Basics of Microelectronics 5 System Programming and Construction Data Bases Control 3

Designing Basics of Electronic and Computing Means 3

Elective Courses Programming Algorithms for Solution of Engineering Tasks 3

Theory of Designing Decisions Taking and Optimization 4

Total 31 Total 34,5


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Foreign Language of the Professional Direction 2,5


Economics and Organization of Production 3 Labour Protection 1,5 Calculating and Microprocessor Means in Electronic Apparatus-2 4

Basics of Building and Use of Household Electronics 3,5

Automatization of Electronic Devices Engineering and Designing 6

Electronic and Computing Devices and Systems 4

Electronic and Computing Devices and Systems 4,5

Designing Basics of Electronic and Computing Means 4

Designing Basics of Electronic and Computing Means 3,5 Preparation of Thesis 2,5

Elective Courses System Programming and Construction Data Bases Control 3 Artificial Intelligence 3,5

Computer Engineering and Programming (Additional Chapters) 2,5

Modelling of Electronic Circuits and Systems 3,5

Total 30,5 Total 30


___________________________________________________________________________ 518 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Manufacturing of Electronic Facilities

Fifth Year



Foreign Language 1 Foreign Language 1 Labour Protection 1 Intellectual Property 1

Modern Computer Technologies in Computer Tools Designing 4


Basics of Business and Computer Graphics 6 Peripheral Devices 3

Electronic and Computing Tools for Banking Activity 3

Modern Computer Technologies in Computer Tools Designing 4,5

Marketing 1,5 Technology of Territorially Distributed Networks 4

Expert Systems 4 Industrial Systems with Artificial Intelligence 4

Technology and Control Tools in Information Networks 3

Basics of Engineering Art 4 Elective Courses

Basics of Information Networks Building 7,5

Total 28 Total 26

Specialization:

Application of Neuronet Technologies in Industrial Processes Management 6

Basics of Information Management and Building of Information and Analytical Integration Means 4

Software Distribution Information and Computer Systems 3

Total 9 Total 4

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 519

Degree Structure for Master of Manufacturing of Electronic Facilities




Basics of Scientific Researches 2 Foreign Language 1 Labour Protection 1 Intellectual Property 1 Modern Computer Technologies in Computer Tools Designing 4


Software Distribution Information and Computer Systems 3 Peripheral Devices 3

Marketing 1,5 Technology and Control Tools in Information Networks 3

Expert Systems 4 Modern Computer Technologies in Computer Tools Designing 4,5

Technology of Territorially Distributed Networks 4

Basics of Information Management and Building of Information and Analytical Integration Means 4

Scientific Research 8 Elective Courses

Basics of Information Networks Building 7,5

Total 24 Total 31,5


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Creative Methods for Solution of Complex Engineering Tasks 4 SOS Designing 4 Electronic and Computing Means on Basis of Digital Signal Processors 4 Systems of Computer Vision 2,5 Production Certification and Quality Control Systems 3,5 Preparation of Thesis 25,5 Pedagogical Practical Training 1,5



___________________________________________________________________________ 520 GENERAL CATALOG 2009-2010

Speciality: Acoustics Facilities and Systems

Degree Structure for Bachelor of Acoustotechnics

First Year



Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1 Philosophy-2. Science of Religion, Logic, Ethics, Aesthetics 1

Analytic Geometry 4,5 Mathematical Analysis-2 6,5 Mathematical Analysis-1 5 General Physics-2 6,5




Computer Science. Computers and Basics of Programming 4 Applied Mechanics-1 3


Electrical, Radio and Acoustic Materials 3

Total 30 Total 31,5

Second Year



Foreign Language-1 2 Foreign Language-1 2 Mathematical Analysis-3 5,5 Philosophy-1 2,5

Ecology 2 Probabilistic Basics of Data Processing 5,5

Calculus Mathematics 6 Theory of Electric Circuits-2 6 Theory of Electric Circuits-1 6 Theoretical Basics of Acoustics 5,5 Applied Mechanics-2 5,5 Basics of Electronics 4

Theory of Processes and Systems. Deterministic Processes 6

Elective Courses Acoustic Ecology 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 521

Third Year



Foreign Language 2 Foreign Language 2 Foreign Language-1 0 Economic Theory 2 Psychology 1,5 Applied Acoustics-1 4,5 Sociology 1,5 Life Safety and Labour Protection 3,5 Analogue Circuit Engineering 7 Industrial Practical Training 4,5 Digital Circuit Engineering 7 Physical Acoustics-2 4,5

Theory of Processes and Systems. Random Processes 7 Acoustic-Electrical Transducers 6

Physical Acoustics-1 4 Processing Methods of Audible Signals 5,5

Elective Courses

Basics of Defectology and Non-Destructive Control 4

Total 30 Total 36,5

Fourth Year






Economics and Organization of Production 3 Acoustic Devices and Systems 3,86

Processing Methods of Audible Signals 5,5

Measurement on Acoustical and Ultrasonic Frequencies 4,5

Acoustic Devices and Systems 5,14 Labour Protection 1,5

Preparation of Thesis 1,5 Design of Electro-Acoustic Equipment 5

Preparation of Thesis 1,5 Elective Courses

Digital Electronic Devices 7 Acoustoengineering 0,97

Acoustic Ecology 1,5 Basics of Microprocessor Technique 3,5

Acoustoengineering 1,03 Acoustic Electronics 2,5



___________________________________________________________________________ 522 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Acoustics Facilities and Systems

Fifth Year




Microprocessor Units of Information Processing 3,5 Basics of Engineering Art 1,19 Acoustic Measurements 3 Intellectual Property 1

Acoustic Information Systems 4 Economics and Organization of Production 2

Power Electronics 3 Noises and Vibrations 3,5

Acoustic Antennas 5 Equipments for Information Registration and Reflection 3,5

Marketing 1,5 Designing of Acoustic Equipments and Systems 4,5

Labour Protection in the Branch 1 Designing of Acoustic Tools and Systems 5

Basics of Engineering Art 1,31 Elective Courses

Electroacoustic Apparatus 3 Acoustic Equipment for Studios and Housings 4,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 523

Degree Structure for Master of Acoustics Facilities and Systems

Fifth Year


Course Title Credit Course Title Credit Foreign Language 1,03 Foreign Language 0,97




Power Electronics 3 Noises and Vibrations 3,5

Acoustic Antennas 5 Equipments for Information Registration and Reflection 3,5

Marketing 1,5 Designing of Acoustic Equipments and Systems 4,5

Labour Protection in the Branch 1 Designing of Acoustic Tools and Systems 5

Basics of Engineering Art 1,31 Scientific Research on Subject 1,5 Scientific Research on Subject 1,5

Elective Courses

Electroacoustic Apparatus 3 Acoustic Equipment for Studios and Housings 4,5


Sixth Year


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Modelling of Acoustic Processes and Fields 3 Experiment Formulation and Carrying Out 3 Computer Acoustic Systems 3 Scientific Research on Subject 1,5 Pedagogical Practical Training 1,5

Total 20,5 Total 27


___________________________________________________________________________ 524 GENERAL CATALOG 2009-2010

Speciality: Medical Acoustic and Bioacoustic Devices and Units


First Year



Foreign Language-1 2 Foreign Language-1 2 Ukrainian Language 1 History of Ukraine 1,5

Science of Culture 1 Philosophy-2. Science of Religion, Logic, Ethics, Aesthetics 1

Analytic Geometry 4,5 Mathematical Analysis-2 6,5 Mathematical Analysis-1 5 General Physics-2 6,5




Computer Science. Computers and Basics of Programming 4 Applied Mechanics-1 3


Electrical, Radio and Acoustic Materials 3

Total 30 Total 31,5

Second Year



Foreign Language-1 2 Foreign Language-1 2 Mathematical Analysis-3 5,5 Philosophy-1 2,5


Calculus Mathematics 6 Theory of Electric Circuits-2 6 Theory of Electric Circuits-1 6 Theoretical Basics of Acoustics 5,5 Applied Mechanics-2 5,5 Basics of Electronics 4

Theory of Processes and Systems. Deterministic Processes 6

Elective Courses Anatomy and Histology 3

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 525

Third Year




Sociology 1,5 Applied Acoustics. Sonics of Hearing and Sound Formation 4,5

Analogue Circuit Engineering 7 Life Safety and Labour Protection 3,5 Digital Circuit Engineering 7 Industrial Practical Training 4,5

Theory of Processes and Systems. Random Processes 7 Physical Acoustics-2 4,5 Physical Acoustics-1 4 Acoustic-Electrical Transducers 6


Elective Courses Biophysics 4

Total 30 Total 36,5

Fourth Year







Medical Acoustic Tools and Systems 3,86


Measurement on Acoustical and Ultrasonic Frequencies 4,5

Medical Acoustic Tools and Systems 5,14 Labour Protection 1,5

Preparation of Graduation Thesis 1,5 Design of Electro-Acoustic Equipment 5

Preparation of Thesis 1,5 Elective Courses

Digital Electronic Devices 7 Acoustoengineering 0,97

Acoustic Ecology 1,5 Basics of Microprocessor Technique 3,5

Acoustoengineering 1,03 Acoustic Electronics 2,5



___________________________________________________________________________ 526 GENERAL CATALOG 2009-2010


Medical Acoustic and Bioacoustic Devices and Units

Fifth Year






Acoustic Antennas 5 Acoustic Waves Influence on People and Animals 3,5

Marketing 1,5 Image Processing in Medicine 3,5

Labour Protection in the Branch 1 Designing of Acoustic Medical Equipments and Apparatus 4,5

Methods of Diagnostics and Therapy 3

Designing of Acoustic Medical Tools and Apparatus 5

Basics of Engineering Art 1,31 Elective Courses

Biomedical Sensors 3 Functional Systems and its Pathologies 2

Acoustic Devices of Surgery and Therapy 2,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 527

Degree Structure for Master of Medical Acoustic and Bioacoustic Devices and Units

Fifth Year






Acoustic Antennas 5 Acoustic Waves Influence on People and Animals 3,5

Marketing 1,5 Image Processing in Medicine 3,5

Labour Protection in the Branch 1 Designing of Acoustic Medical Equipments and Apparatus 4,5

Methods of Diagnostics and Therapy 3

Designing of Acoustic Medical Tools and Apparatus 5

Basics of Engineering Art 1,31 Scientific Research on Subject 1,5 Scientific Research on Subject 1,5

Elective Courses

Biomedical Sensors 3 Functional Systems and its Pathologies 2

Acoustic Devices of Surgery and Therapy 2,5


Sixth Year


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Modelling of Acoustic Processes and Fields 3 Experiment Formulation and Carrying Out 3 Computer Acoustic Systems 3 1,5 Pedagogical Practical Training 1,5

Total 20,5 Total 27


___________________________________________________________________________ 528 GENERAL CATALOG 2009-2010

Speciality: Video, Audio and Cinetechnics




Ukrainian Language 1 Foreign Language-1 2 Science of Culture 1 History of Ukraine 1,5

Foreign Language-1 2 Philosophy-2. Science of Religion, Logic, Ethics, Aesthetics 1

Analytic Geometry 4,5 Higher Mathematics. Mathematical Analysis-2 6,5

Higher Mathematics. Mathematical Analysis-1 5 General Physics-2 6,5




Computer Science. Computers and Basics of Programming 4 Applied Mechanics 3 Introduction of Measuring Technique 4 Chemistry and Electroradiomaterials 3

Total 30 Total 31,5

Elective Courses:

Physical Training 2 Physical Training 2 Total 2 Total 2


___________________________________________________________________________ www.kpi.ua 529

Second Year


Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics. Mathematical Analysis-3 5,5 Philosophy-1 2,5


Calculus Mathematics 6 Theory of Electric Circuits-2 6 Theory of Electric Circuits-1 6 Basics of Electronics 4,5

Theoretical Basics of Acoustics 5,5

Optics and Lighting Engineering of Television and Video Systems 4

Theory of Processes and Systems 4

Theory of Information and Coding-1 3

Elective Courses Audio- and Video Terminals-1. Basics of Audio- and Video Technology 3

Total 30 Total 31,5

Elective Courses:

Physical Training 2 Physical Training 2 Total 2 Total 2


___________________________________________________________________________ 530 GENERAL CATALOG 2009-2010

Third Year


Foreign Language-3 2 Foreign Language-3 2 Psychology 1,5 Economic Theory 2

Sociology 1,5

Applied Acoustics-2. Architectural Acoustics and Equipment 6

Analogue Circuit Engineering 7 Digital Circuit Engineering 7 Applied Acoustics-1. Electroacoustics 4


Theory of Information and Coding-2 4 Industrial Practical Training 4,5

Film Equipments 5 Equipments for Information Registration and Displaying 4,5

Movable Mechanisms and Electric Drive of Audio and Video Equipment-1 3

Elective Courses Audio- and Video Terminals-2. Basics of Recording and Imaging 2

Power Supply of Electronic Equipments 4



Total 2 Total


Course Title Credit Course Title Credit Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5

Theory of Information and Coding 4 Foreign Language of the Professional Direction 2


Systems and Networks of Radio and Telecasting 4

Basics of Microprocessor Technique 4 Labour Protection 1,5 Foreign Language of the Professional Direction 2 Electronic Equipments Designing 3 Systems and Networks of Radio and Telecasting 3

Measurement on Acoustical and Ultrasonic Frequencies 4

Preparation of Thesis 3 Elective Courses

Electromagnetic Compatibility of Electronic Equipments 5

Control, Diagnostics and Reliability of Electronic Equipments 4

Video, Audio Equipment and Cinetechnics 3

Digital Technologies in Television and Cinematography 3

Total 28 Total 28


___________________________________________________________________________ www.kpi.ua 531

Degree Structure for Specialist of Video, Audio and Cinetechnics

Fifth Year





Tools and Apparatus of Video and Filming 3

Design and Technological Basics of Entertainment Events Organization 3

Systems of Digital Television and Cinematograph 3

Technologies and Equipments of Sound and Videoprograms Creation 3

Systems and Distribution Networks of Telecommunication and Informational Services 4,5 Broadcast Television Complexes 3,5

Designing of Record Devices and Information Saving 5

Circuit Engineering of Audio, Video and Cinematography Equipment 3

Power Electronics 3,5 Microprocessors in Signals Processing 4

Methods of Signals Transformation 4

Elective Courses

Technology of Cinematography and Video Industry 3 Basics of Engineering Art 2,5 Basics of Engineering Art 2


Sixth Year




Total 33 Total


___________________________________________________________________________ 532 GENERAL CATALOG 2009-2010

Degree Structure for Master of Video, Audio and Cinetechnics






Tools and Apparatus of Video and Filming 3

Design and Technological Basics of Entertainment Events Organization 3

Systems of Digital Television and Cinematograph 3




Circuit Engineering of Audio, Video and Cinematography Equipment 3

Power Electronics 3,5 Microprocessors in Signals Processing 4

Methods of Signals Transformation 4

Elective Courses Technology of Cinematography and Video Industry 3 Basics of Engineering Art 2,5 Basics of Engineering Art 2

Total 29,5 Total 28


Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Modelling of Phonics Systems in Telecommunication Networks 3 Technology of Publications and Performances Application 2,5 Special Television Systems 3,5 Scientific Research 4,5 Pedagogical Practical Training 1,5

Total 23,5 Total 27


___________________________________________________________________________ www.kpi.ua 533

Speciality: Telecommunication Systems and Networks


First Year



Ukrainian Language 1 Foreign Language-1 2 Science of Culture 1 History of Ukraine 1,5

Foreign Language-1 2 Philosophy-2. Science of Religion, Logic, Ethics, Aesthetics 1

Analytic Geometry 4,5 Higher Mathematics. Mathematical Analysis-2 6,5

Higher Mathematics. Mathematical Analysis-1 5 General Physics-2 6,5




Computer Science. Computers and Basics of Programming 4 Chemistry and Electroradiomaterials 3 Introduction of Measuring Technique 4


Total 30 Total 31,5

Elective Courses:


Total 2 Total 2


___________________________________________________________________________ 534 GENERAL CATALOG 2009-2010

Second Year


Foreign Language-2 2 Foreign Language-2 2 Higher Mathematics. Mathematical Analysis-3 5,5 Philosophy-1 2,5 Ecology 2 Theory of Electric Connection-1 3

Theory of Electric Circuits-1 6 Technical Electrodynamics and Radio Wave Propagation-2 4

Technical Electrodynamics and Radio Wave Propagation-1 5,5 Theory of Electric Circuits-2 6

Special Chapters of Mathematics. Calculus Mathematics. 6

Special Chapters of Mathematics. Probabilistic Basics of Data Processing 5,5

Basics of Electronics 4,5 Elective Courses

Audio- and Video Terminals-1. Basics of Audio- and Video Technology 3

Applied Programming in Telecommunication Systems-1. Theory of Processes and Systems 4

Total 30 Total 31,5 Elective Courses: Physical Training 2 Physical Training 2

Total 2 Total 2


Course Title Credit Course Title Credit Foreign Language-3 2 Foreign Language-3 2 Psychology 1,5 Economic Theory 2 Sociology 1,5 Life Safety and Labour Protection 3,5

Network Technologies-1. Optical Technologies in Telecommunication Systems 4

Technology of Wireless Telecommunication Systems-1. Systems and Communication Facilities with Movable Objects 4

Theory of Electric Connection-2 5 Industrial Practical Training 4,5 Analogue Circuit Engineering 7 Digital Circuit Engineering 7

Telecommunication Networks, Control and Commutation 5

Equipments for Information Registration and Displaying 4,5

Elective Courses Audio- and Video Terminals-2. Basics of Recording and Imaging 2

Power Supply of Electronic Equipments 4

Applied Programming in Telecommunication Systems-2. Mathematical Modelling of Processes 3 Applied Acoustics-1. Electroacoustics 4


Total 2 Total


___________________________________________________________________________ www.kpi.ua 535

Fourth Year


Psychology 2 Science of Law 2 Sociology 2 Political Science 1,5 Economics and Organization of Production 3


Basics of Microprocessor Technique 4 Systems and Networks of Radio and Telecasting 4

Telecommunication and Information Networks 4 Labour Protection 1,5 Systems and Communication Facilities with Moving Objects 3 Electronic Equipments Designing 3 Transferring Devices of Telecommunication Systems and Networks 2 Preparation of Thesis 3 Receiving Devices of Telecommunication Systems and Networks 5 Foreign Language of the Professional Direction 2 Systems and Networks of Radio and Telecasting 3

Elective Courses

Control, Diagnostics and Reliability of Electronic Equipments 4

Electromagnetic Compatibility of Radioequipments 5

Systems of Digital Television 3 Total 30 Total 29


___________________________________________________________________________ 536 GENERAL CATALOG 2009-2010


Telecommunication Systems and Networks

Fifth Year





Law Issues of Radio and Television Broadcasting 2

Digital Processing of Image Signals 3,5

Perspective Technologies in Telecommunications 3,5




Special Measurements in Telecommunication Systems 3,5

Technical Exploitation and Testing of Communication Networks 4 Systems of Applied Television 3,5

Information Saving in Telecommunication Systems 3,5

Elective Courses Digital Processing of Signals 3 Basics of Engineering Art 2,5 Basics of Engineering Art 2


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 537

Degree Structure for Master of Telecommunication Systems and Networks

Fifth Year






Law Issues of Radio and Television Broadcasting 2

Digital Processing of Image Signals 3,5

Perspective Technologies in Telecommunications 3,5


Systems and Distribution Networks of Telecommunication and Informational Services 4,5 Broadcast Television Complexes 3,5 Designing of Record Devices and Information Saving 5

Special Measurements in Telecommunication Systems 3,5

Technical Exploitation and Testing of Communication Networks 4 Systems of Applied Television 3,5

Information Saving in Telecommunication Systems 3,5

Elective Courses Digital Processing of Signals 3 Basics of Engineering Art 2,5 Basics of Engineering Art 2

Total 29,5 Total 28

Sixth Year


Pedagogics of Higher School 1,5 Pedagogical Practical Training 1,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Modelling of Phonics Systems in Telecommunication Networks 3 Technology of Publications and Performances Application 2,5 Modern Information Technologies in Telecommunication Systems 3,5 Scientific Research 4,5 Pedagogical Practical Training 1,5

Total 23,5 Total 27

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF INSTRUMENT MAKING

___________________________________________________________________________ www.kpi.ua 539

Faculty of Instrument Making

Faculty of Instrument Making was founded in 1962. Within 40 years of faculty existing over 11000 specialists including 200 foreigners were trained. There are also 23 doctors and more than 250 PhDs among graduates.

Devices developed at the Faculty are used in many areas of human activity, especially in aerospace and shipbuilding industry, automobile industry, oil and gas industry. They are also used in rail transport, robotics, engineering geodesy, gravimetry, yachts construction and in domestic area. These are inertial sensors of source information and inertial systems, devices and measuring systems of different physical quantities control constructed on its basis (pressure, temperature, time, expenses and sizes in mechanical engineering), devices and systems of thermal imaging and night viewing, optoelectronic sensors of angular and linear movement, devices and systems for analysis of substances in fluids and gas environments, etc.

Sensors of source information and systems on its basis are made and produced in countries which have highly developed intellectual potential. Instrument making is the branch where high technologies are developed and which availability proves intellectual potential of the country.

http://pbf.kpi.ua


___________________________________________________________________________ 540 GENERAL CATALOG 2009-2010

Speciality: Instruments of Precision Mechanics

Degree Structure for Bachelor of Instrument Making

First Year


Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language 2 Foreign Language 2 Higher Mathematics-1. Analytic Geometry 6

Higher Mathematics-2. Differential Equations 6,5

General Physics-1 Mechanics. Molecular Physics and Thermodynamics 5

General Physics-2. Electrostatics. Electromagnetism. Wave Optic 5,5

Computer Science and Programming-1. Computer Science 6 Chemistry 4 Material Science and Construction Materials 3

Computer Science and Programming-2. Programming 4

Engineering and Computer Graphics-1. Engineering Graphics 4

Engineering and Computer Graphics-2. Computer Graphics 4,5

Basics of Modern Instrument Making 1,5

Theoretical Mechanics-1. Statics. Kinematics 3

Total 30 Total 31,5

Second Year


Philosophy 1 2,5 Foreign Language 2

Foreign Language 2

Higher Mathematics-4. Theory of Function with Complex Variable. Operational Calculations. Theory of Probability 6,5

Higher Mathematics-3. Mathematical Analysis 6 Ecology 2 General Physics-3. Quantum Optics. Atomic Physics. Basics of Physics of Solid Matter 4

Computer Mathematical Modelling-2. Approximate Methods for Solution of Equations 2

Physical Basics of Measuring Transformations 3,5 Metrology 3 Computer Mathematical Modelling-1. Modelling Methods of Physical Objects 2

Applied Mechanics-2. Mechanisms of Devices 4,5


Electrical Engineering-2. Transient Processes in Linear and Magnite Circles 4,5

Applied Mechanics-1. Mechanics of Materials 4,5

Electronics-1. Semiconductor Devices 3

Electrical Engineering-1. Analysis Methods of Electrical Circles 3

Basics of Devices Elements Designing in CAD Systems 4



___________________________________________________________________________ www.kpi.ua 541

Third Year



Devices Elements Designing-1. Transmission Elements 4

Design of Devices Elements-2. Springing Elements. Muffs. Regulators 7

Production Technology of Devices-1. Production Technology of Devices Elements 4

Production Technology of Devices-2. Technology of Devices Assembly 6,5

Transforming Devices of Tools-1. Transforming of Mechanical Quantities in Electrical 4

Transforming Devices of Tools-2. Transforming of Mechanical Quantities in Electrical 5,5

Electronics-2. Analog and Digital Circuitry 3 Industrial Practical Training 4,5

Theory of Automatic Control 4

Measuring Instruments Designing-1. Theory of Measuring Instruments 4

Microprocessors in Measurement Means 5

Elective Courses Basics of Interchangeability 2


Fourth Year


Science of Law 2 CEA/CAD Systems 4 Political Science 1,5 Devices Designing 3 Labour Protection 1,5 Basics of Energy Saving 3 Theory and Designing of Measuring Instruments and Systems 7

Means of Intellectual Control and Diagnostics 3,5

Data Bases 4,5 Management 1,5 Economics and Organization of Devices Production 4


Foreign Language of the Professional Direction 4 Preparation of Graduation Thesis 1,5

Elective Courses

Testing of Devices 3,5 Computer Systems and Network Information Technologies 4

Special Instruments and Apparatus 3 Three-Dimensional Computer Designing 3,5

Total 31 Total 24


___________________________________________________________________________ 542 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Instruments of Precision Mechanics

Fifth Year


Marketing 1,5 Foreign Language 1,01 Foreign Language 0,99 Informative Mechanics 4,51 Development of Intellectual Tools and Systems 4,5

Computerized Measuring Complexes 3,5

Informative Mechanics 4,49 Tools and Apparatus of Fine Mechanics 4,6

Tools and Apparatus of Fine Mechanics 3,4 Methods of Practical Optimization 4,5 Dynamic Objects and Its Design 3 Electromechanics 3 New Information Technologies and Telematics 3 Intellectual Property 1 Labour Protection in the Branch 1

Elective Courses Computer Technologies of Decisions Making 2 Object-Oriented Programming 3,5 Basics of Engineering Experiment 2

Total 25,88 Total 25,62 Specialization: Measuring Instruments and Systems in Energy Saving 3,4

Measuring Instruments and Systems in Energy Saving 4,6

Energy-Saving Systems 4,5

Metrological Certification of Energy Saving Devices 3

Total 3,4 Total 12,1 Specialization: Computer Design of Devices and Apparatus 3,4

Computer Design of Devices and Apparatus 4,6

Program Tools of Complex Systems Modelling 3

Total 6,4 Total 4,6

Sixth Year



Total 33 Total


___________________________________________________________________________ www.kpi.ua 543

Degree Structure for Master of Instruments of Precision Mechanics



Marketing 1,5 Philosophic Problems of Scientific Knowledge 1,5

Labour Protection in the Branch 1 Science of Patent and Copyright 2 Basics of Scientific Researches 2 Foreign Language 2 Development of Intellectual Tools and Systems 4,5


Informative Mechanics 4,51 Informative Mechanics 4,49 Tools and Apparatus of Fine Mechanics 3,65

Computerized Measuring Complexes 3,5

Dynamic Objects and Its Design 3 Tools and Apparatus of Fine Mechanics 4,35

New Information Technologies and Telematics 3 Methods of Practical Optimization 4,5 Electromechanics 3 Intellectual Property 1

Elective Courses Computer Technologies of Decisions Making 3 Object-Oriented Programming 4,5 Basics of Engineering Experiment 3

Total 29,16 Total 33,84 Specialization: Measuring Instruments and Systems in Energy Saving 3,4

Measuring Instruments and Systems in Energy Saving 4,6

Energy-Saving Systems 4,5

Metrological Certification of Energy Saving Devices 3

Total 3,4 Total 12,1 Specialization: Computer Design of Devices and Apparatus 3,38

Computer Design of Devices and Apparatus 4,63

Program Tools of Complex Systems Modelling 3


Sixth Year


Pedagogics of Higher School 1,5 Scientific Research on Master's Thesis Subject 7,5

Basics of Society's Sustainable Development 2 Preparation of Thesis 25,5 Mathematical Methods of Optimization 3 Scientific Research in the Branch of Mechanical Quantities Measurement 4,5

Total 11 Total 33


___________________________________________________________________________ 544 GENERAL CATALOG 2009-2010

Speciality: Scientific, Analytical and Ecological

Instruments and Systems



Course Title Credit Course Title Credit Philosophy 1 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Foreign Language-1 2 Foreign Language-1 2 Higher Mathematics1. Analytic Geometry and Linear Algebra 6

Higher Mathematics2. Mathematical Analysis 6,5

General Physics-1. Mechanics and Molecular Physics 5

General Physics-2. Electrostatics. Electromagnetism. Optics 5,5

Engineering Graphics-1. Descriptive Geometry and Engineering Graphics 4 Chemistry 4 Computer Science 1. Apparatus and System Computer Software. Basics of Algorithmization 6

Engineering Graphics. Computer Graphics 4,5

Introduction to Speciality 1,5 Computer Science-2. Basics of Programming 4

Material Science and Construction Materials 3 Theoretical Mechanics-1 3

Total 30 Total 31,5

Second Year



Philosophy-2 2,5


Higher Mathematics-3 6

Electrical Engineering 2. Transient Processes in Linear Magnite Circles 4,5

Electrical Engineering-1. Analysis Methods of Electrical Circles 3 Ecology 2 Additional Course of Physics-1. Oscillating and Wave Processes 3

Additional Course of Physics-2. Solid Body and Quantum Radiation 4

Applied Mechanics-1. The Strength of Materials. Mechanisms 3

Applied Mechanics 2. Tools Details and Interchangeability 4,5

Theoretical Mechanics 2. Kinematics and Dynamics 3 Metrology 4 Physical and Analytical Chemistry 3 Electronics 4 Office Computer Technologies 5



___________________________________________________________________________ www.kpi.ua 545

Third Year


Economic Theory 2 Psychology 1,5 Analogue Circuit Engineering 5 Sociology 1,5 Foreign Language of the Professional Direction 2


Life Safety and Labour Protection 3,5 Digital Electronics and Microprocessors 5

Theory of Measuring Instruments 7 Measuring Transducers 7

Electrical Measurements 4 Technology of Devices Engineering 5

Theory of Automatic Control 2 Industrial Practical Training 4,5 Basics of Experiment Theory 3

Elective Courses

Environmental Safety 5 Computing Mathematics and Modelling on Computer 3

Ecological Audit 3 Total 30,5 Total 35,5

Fourth Year


Science of Law 2 Foreign Language - 4.Professional Direction 1,75

Political Science 1,5 Preparation of Graduation Thesis 1,5


Analytical Ecological Instruments-2. Analysis of Liquids and Solid Matters 4,5

Foreign Language-4. Professional Direction 1,75 Devices Designing 3,5

Labour Protection 1,5 Production Technology of Devices Elements 4,5

Theoretical Fundamentals of Information and Measurement Technology 7 Management 1,5 Analytical Ecological Instruments-1. Analysis of Gases 8,5 Electrical Micromachines 2

Information Registration and Imaging Tools 3

Tools for Radiation Measurements 4,5 Elective Courses

Devices Quality and Certification 3 Devices Quality and Certification 0 Total 28,25 Total 26,75


___________________________________________________________________________ 546 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Scientific, Analytical and Ecological


Fifth Year



Marketing 1,5 Foreign Language 0,97 Foreign Language 1,03 Intellectual Property 1 Devices Quality and Certification 2 Systems of Ecological Monitoring 5

Measurement Tools for Environment Parameters 6,5

Quality Testing Tools for Food Products 5

Microprocessor Devices and Systems 4,5

Metrological Support of Analytical Measurements 5

Information Technologies in Ecology 8,5

Television Scientific and Technological Devices and Systems 5


Logistics of Ecological Instrument Engineering 3

Computerized Systems of Technological and Ecological Monitoring 2


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 547

Degree Structure for Master of Scientific, Analytical and Ecological





Foreign Language 1,03 Science of Patent and Copyright 2 Basics of Scientific Researches 2 Foreign Language 0,97

Devices Quality and Certification 2 Mathematical Modelling of Systems and Processes 3

Measurement Tools for Environment Parameters 6,5 Intellectual Property 1 Microprocessor Devices and Systems 4,5 Systems of Ecological Monitoring 5 Information Technologies in Ecology 8,5

Quality Testing Tools for Food Products 5

Labour Protection in the Branch 1 Metrological Support of Analytical Measurements 5

Television Scientific and Technological Devices and Systems 5

Elective Courses

Logistics of Ecological Instrument Engineering 3

Computerized Systems of Technological and Ecological Monitoring 2


Sixth Year


Pedagogics of Higher School 1,5 Scientific Researches on the Subject 7,5

Basics of Sustainable Development 2 Preparation of Master's Attestation Project 25,5

Mathematical Methods of Optimization 3 Software of Information Gathering Systems 7

Total 13,5 Total 33


___________________________________________________________________________ 548 GENERAL CATALOG 2009-2010

Speciality: Instruments and Systems of Non-Destructive

Testing



Course Title Credit Course Title Credit Foreign Language 2 Foreign Language 2 History of Ukraine 1,5 Ukrainian Language 1 Philosophy 1 1 Science of Culture 1 Higher Mathematics1. Analytic Geometry and Linear Algebra 6

Higher Mathematics 2. Mathematical Analysis 6,5


General Physics-2. Electrostatics. Electromagnetism. Optics 5,5

Engineering Graphics 1. Descriptive Geometry and Engineering Graphics 4 Chemistry 4 Computer Science 1. Apparatus and System Computer Software. Basics of Algorithmization 6

Engineering Graphics 2. Computer Graphics 4,5

Material Science 3 Computer Science 2. Basics of Programming 4

Introduction to Speciality 1,5 Theoretical Mechanics 3 Total 30 Total 31,5

Second Year


Philosophy 2 2,5 Foreign Language 2 Foreign Language 2 Ecology 2

Higher Mathematics 3. Mathematical Analysis 6

Electrical Engineering 2. Transient Processes in Linear Magnetic Circles 4,5



Theoretical Mechanics 2. Kinematics and Dynamics 3 Physics 4. Additional Course 2 Electrical Methods of Non-Destructive Control 1 4,5 Electronics 1 3 Applied Mechanics-1. The Strength of Materials 2 Metrology and Interchangeability 3

Physics 3. Physics of Solid Body 3 Applied Mechanics 2. Theory of Mechanisms 4,5

Computer Methods of Projecting and Calculations 1 4

Electrical Methods of Non-Destructive Control 2 1,5

Computer Methods of Projecting and Calculations 2 2,5

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 549

Third Year


Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Theory of Automatic Control 4 Microprocessors and Computers 7,5 Electronics 5 Electronics 4,5

Theory of Signals 5,5 Magnetic, Electric Methods of Non-Destructive Control 6

Theory of Electromagnetic Fields 4,5 Foreign Language of the Professional Direction 2

Foreign Language of the Professional Direction 2 Industrial Practical Training 4,5 Inspection Technology 7

Elective Courses Computer Methods of Projecting and Calculations 1 3

Technology of Devices Engineering 2


Fourth Year


Science of Law 2 Management 1,5

Political Science 1,5 Acoustical Methods of Non-Destructive Control 4

Labour Protection 1,5 Optical Methods of Non-Destructive Control 4

Economics and Organization of Production 4 Penetrating Radiation Check 3,5 Magnetic, Electric Methods of Non-Destructive Control 2,5


Acoustical Methods of Non-Destructive Control 4 Preparation of Attestation Project 1,5

Penetrating Radiation Check 3 Mathematical Modelling and Digital Information Processing 4

Heat Methods of Non-Destructive Control 5 Foreign Language of the Professional Direction 2

Elective Courses Methods of Accuracy Estimation and Probability** 2 Computer Systems** 7



___________________________________________________________________________ 550 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Instruments and Systems of Non-

Destructive Testing

Fifth Year



Marketing 1,5 Foreign Language of the Professional Direction 1


Systems of Non-Destructive Testing 4,5

Labour Protection 1 Medical Instruments of Non-Destructive Testing 6

Optical Devices of Non-Destructive Testing 3

Acoustic Instruments of Non-Destructive Testing 3

Information Processing Methods 3 Constructional Materials 3

Acoustic Instruments of Non-Destructive Testing 4,5 Intellectual Property 1

Basics of Reliability Theory 4 Microcontrollers in Systems of Non-Destructive Testing 4

Constructional Materials 3

Designing of Scanners in Systems of Non-Destructive Testing 2

Elective Courses Standardization and Certification* 3 Information Technologies 4,5

Total 26 Total 27

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 551

Degree Structure for Master of Instruments and Systems of Non-

Destructive Testing




Foreign Language of the Professional Direction 1 Science of Patent and Copyright 2

Basics of Scientific Researches 2 Foreign Language of the Professional Direction 1

Labour Protection 1 Mathematical Modelling of Systems and Processes 3

Optical Devices of Non-Destructive Testing 4

Systems of Non-Destructive Testing 4,5

Information Processing Methods 3 Medical Instruments of Non-Destructive Testing 6

Acoustic Instruments of Non-Destructive Testing 4,5

Acoustic Instruments of Non-Destructive Testing 3

Basics of Reliability Theory 4 Microcontrollers in Systems of Non-Destructive Testing 4

Constructional Materials 3 Constructional Materials 3 Designing of Scanners in Systems of Non-Destructive Testing 2,5 Intellectual Property 1

Elective Courses Standardization and Certification* 3 Information Technologies 4,5


Sixth Year


Pedagogics of Higher School 1,5 Preparation of Attestation Project 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Designing of Technical and Medical Diagnostics Systems 4,5 Scientific Researches on the Subject 7,5



___________________________________________________________________________ 552 GENERAL CATALOG 2009-2010

Speciality: Technology of Instrument Making


First Year


Philosophy 2. Science of Religion, Logic, Ethics and Aesthetics 1 Foreign Language 1 2 Foreign Language 1 2 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Higher Mathematics 1. Analytic Geometry and Linear Algebra 6




Engineering Graphics 1. Descriptive Geometry and Engineering Graphics 4 Chemistry 4 Computer Science 1. Apparatus and System Software for Computer. Basics of Tasks Algorithmization 6


Introduction to Speciality. Devices. Technology and Production 1,5

Computer Science 2. Basics of Programming 4

Material Science and Construction Materials 3

Theoretical Mechanics 1. Statics and Kinematics 3

Total 30 Total 31,5

Second Year


Philosophy 1 2,5 Foreign Language 1 2

Foreign Language 1 2


Higher Mathematics 3. Mathematical Analysis 6 Ecology 2



Electrical Engineering-1. Analysis Methods of Electrical Circles 3 Electronics 3 Basics of Devices Elements Designing 3 Metrology and Interchangeability 3

Additional Course of Physics 5 Applied Mechanics 2. Theory of Mechanisms and Machines 4,5

Applied Mechanics 1. Strength of Materials 2


The Databanks 4 Elective Courses

Basics of Computer Technologies 3,5 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 553

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Psychology 1,5 Physical Training 1 Sociology 1,5 Life Safety and Labour Protection 3,5 Industrial Practical Training 4,5 Electronics 3 Microprocessors and Computers 2,75 Microprocessors and Computers 2,75 Computer Mathematical Modelling 3,5

Theory of Automatic Control 5,5 Computer-Aided Design Systems of Technological Processes 4


Quality Control and Management. Qualimetry 5

Computer Mathematical Modelling 3 Reliability of Technical Systems 2

Theoretical Basics of Materials Processing in Instrument Making 3,5

Elective Courses Technological Documentation in Instrument Engineering 3

Laser Technologies in Instrument Making 5


Fourth Year


Science of Law 2 Foreign Language 1,5 Political Science 1,5 Management 1,5

Foreign Language 2 Computer-Aided Design Systems of Technological Processes 2,5

Labour Protection 1,5 Assembly and Testing Technology of Devices 2,67


Automatization of Industrial Processes and Robot-Technical Complexes 3,94

Computer-Aided Design Systems of Technological Processes 4

Special Types of Technological Processes CAD Systems 4

Assembly and Testing Technology of Devices 3,33 Graduation Thesis Projecting 1,5 Automatization of Industrial Processes and Robot-Technical Complexes 3,56

Elective Courses The Unified System of Technological Documentation 3

Laser Technologies in Instrument Making 6

Modelling of Technological Processes 3



___________________________________________________________________________ 554 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Technology of Instrument Making

Fifth Year


Marketing 1,5 Intellectual Property 1 Foreign Language of the Professional Direction 1


Special Equipment and Processes in Instrument Making 3,94


Computer-Aided Design Systems of Technological Processes 1,5

Automatization of Control Programs Development 4

Diagnostics and Reliability of Technological Processes 4

Basics of Instrument Making Production Organization 3,44

Basics of Instrument Making Production Organization 3,06

Production Technology of Optoelectronic Instruments 4

Information and Retrieval Systems for Engineering Purposes 4

Microprocessor Systems of Automated Control 4,5

Microprocessor Systems of Automated Control 3 Labour Protection in the Branch 1

Elective Courses Methods and Means of Quality Maintenance for Devices and Systems Assembly 4

Methods and Means of Quality Maintenance for Devices and Systems Assembly 3,5

Total 27 Total 25,5

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 555

Degree Structure for Master of Technology of Instrument Making




Foreign Language 1 Science of Patent and Copyright 2 Basics of Scientific Researches 2 Foreign Language 1 Special Equipment and Processes in Instrument Making 3,67


Computer-Aided Design Systems of Technological Processes 1,5


Diagnostics of Reliability and Engineering Process Accuracy 4,5

Automatization of Control Programs Development 4

Basics of Instrument Making Organization 3,17

Basics of Instrument Making Organization 3,33

Information and Retrieval Systems for Engineering Purposes 4

Production Technology of Optoelectronic Instruments 4

Microprocessor Systems of Automated Control 3

Microprocessor Systems of Automated Control 4,5


Methods and Means of Quality Maintenance for Devices and Systems Assembly 4

Methods and Means of Quality Maintenance for Devices and Systems Assembly 3,5


Sixth Year


Pedagogics of Higher School 1,5 Graduation Thesis Projecting 25,5 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Spectrum and Correlated Fourier Analysis of Systems 1,75 Quality Management of Devices Production 1,75 Modern Trends of Modern Production Development 1,5 Scientific Researches on the Subject 7,5 Modern Coverings in Instrument Making 1,5



___________________________________________________________________________ 556 GENERAL CATALOG 2009-2010

Speciality: Medical Instruments and Systems


First Year


Philosophy 2. Science of Religion, Logic, Ethics and Aesthetics 1 Foreign Language 1 2 Foreign Language 1 2 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Higher Mathematics 1. Analytic Geometry and Linear Algebra 6




Engineering Graphics 1. Descriptive Geometry and Engineering Graphics 4 Chemistry 4 Computer Science 1. Apparatus and System Software for Computer. Basics of Tasks Algorithmization 6


Introduction to Speciality. Devices. Technology and Production 1,5

Computer Science 2. Basics of Programming 4

Material Science and Construction Materials 3


Total 30 Total 31,5

Second Year


Philosophy 1 2,5 Foreign Language 2 2

Foreign Language 2 2


Higher Mathematics 3 Mathematical Analysis 6 Ecology 2

Theoretical Mechanics 2. Kinematics and Dynamics 3



Applied Mechanics 2. Theory of Mechanisms and Machines 4,5

Applied Mechanics 1. Strength of Materials 2 Metrology and Interchangeability 3 Basics of Devices Elements Designing 3


Additional Course of Physics 5 Electronics 3 Basics of Computer Technologies 3,5

Elective Courses The Databanks 4

Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 557

Third Year


Foreign Language 2 Foreign Language 2 Economic Theory 2 Psychology 1,5 Life Safety and Labour Protection 3,5 Sociology 1,5 Technology of Devices Engineering 4,5 Industrial Practical Training 4,5

Electronics 3 Basics of Human Anatomy and Physiology 3

Theory of Automatic Control 5,5 Computer Mathematical Modelling 3 Organic Chemistry and Biochemistry 5 Microprocessors and Computers 2,5

Computer Mathematical Modelling 3 Assembly Maintenance and Testing of Devices 5

Microprocessors and Computers 3 Optical and Quantum Medical Devices 4,5

Biophysics 3 Apparatus for Physical Therapy 4,5

Total 31,5 Total 35

Fourth Year


Science of Law 2 Management 1,5


Labour Protection in the Branch 1,5 Devices for Measurement of Human Physiological Parameters 3


Optical and Quantum Medical Devices 4,5


Instrument for Using in Surgery and Orthopaedics 2,5

Biometrics 3 Assembly Maintenance and Testing of Devices 2,67

Assembly Maintenance and Testing of Devices 2,83 Graduation Thesis Projecting 1,5 Automatization of Manufacturing Processes and Robot-Technical Complexes 3

Elective Courses

The Databanks 3,5 Laser Technologies in Instrument Making 5,5

The Unified System of Technological Documentation 3 Computer-Aided Design Systems of Technological Processes 3



___________________________________________________________________________ 558 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Medical Instruments and Systems

Fifth Year



Marketing 1,5 Foreign Language 1 Foreign Language 1 Intellectual Property 1 Physical Basics of Medical Instruments and Systems Reliability 4 Acoustic Medical Instruments 4,5 Technological Preparation of Medical Instruments Manufacturing 4,5 Tools of Bioresonance Therapy 4,5 Ophthalmologic Medical Devices 4,5 Telemedicine Basics 3,5

Medical Microprocessor Systems 4

Technology and Equipment for Details and Medical Devices Production 4

Technology and Equipment for Details and Medical Devices Production 3 Medical Microprocessor Systems 3 Labour Protection in the Branch 1

Elective Courses

Nanotechnologies in Medical Instrument Making 3,5

Nanotechnologies in Medical Instrument Making 4

Total 27 Total 25,5

Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 559

Degree Structure for Master of Medical Instruments and Systems




Foreign Language of the Professional Direction 1 Science of Patent and Copyright 2


Physical Basics of Medical Instruments and Systems Reliability 4


Technological Preparation of Medical Instruments Manufacturing 4,5 Acoustic Medical Instruments 4,5 Ophthalmologic Medical Devices 4,5 Telemedicine Basics 3,5 Medical Microprocessor Systems 3 Tools of Bioresonance Therapy 4,5 Technology and Equipment for Details and Medical Devices Production 4,5 Medical Microprocessor Systems 3

Labour Protection in the Branch 1

Technology and Equipment for Details and Medical Devices Production 3,5

Nanotechnologies in Medical Instrument Making 3,5 Intellectual Property 1

Nanotechnologies in Medical Instrument Making 4



Course Title Credit Course Title Credit Pedagogics of Higher School 1,5 Mathematical Methods of Optimization 3 Basics of Society's Sustainable Development 2 Scientific Research on Master's Thesis Subject 7,5 Scientific Research on the Subject and Preparation of Master's Thesis 25,5

Elective Courses Genesis of Biosignals 2,5 Materials for Modern Medicine 2 Cryogenic Medical Technology 2

Total 46 Total


___________________________________________________________________________ 560 GENERAL CATALOG 2009-2010

Speciality: Laser and Optoelectronic Technics

Degree Structure for Bachelor of Optotechnics

First Year


Foreign Language 2 Foreign Language 2 History of Ukraine 1,5 Ukrainian Language 1 Philosophy (Ethics and Aesthetics, Science of Religion, Logic) 1 Science of Culture 1 Higher Mathematics 1. Analytic Geometry and Linear Algebra 6




Engineering Graphics. Descriptive Geometry and Engineering Graphics 4 Chemistry 4 Computer Science 1. Apparatus and System Computer Software. Basics of Algorithmization 6

Engineering and Computer Graphics-2. Computer Graphics 4,5

Computer Science-2. Basics of Programming 0

Computer Science-2. Basics of Programming 4

Material Science and Construction Materials 3 Technical Mechanics 3 Introduction to Speciality 1,5

Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Philosophy 2,5 Ecology 2

Higher Mathematics-3. Mathematical Analysis 6


Electromagnetic and Quantum Theory of Irradiating 4

Theory of Optical Systems-1. Gaussian Optics. Theory of Systems 9

Basics of Radio Circles Theory 4

Technology of Optical Devices Engineering-1. Technology of Instrument Making 4

Basics of Devices Designing 8,5 Electronics and Systems Engineering 8

Theory of Automatic Control 3 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 561

Third Year


Economic Theory 2 Psychology 1,5 Physical Training 2 Sociology 1,5 Foreign Language 2 Foreign Language 2

Life Safety and Labour Protection 3,5 Theory of Optical Systems-2. Theory of Aberrations 0

Theory of Optical Systems-2. Theory of Aberrations 5,5 Wave Optics 6,39 Wave Optics 8,11 Quantum and Nonlinear Optics 5 Microprocessors in Electro-Optical Instruments 5 Electro-Optical Instruments 7 Technology of Optical Devices Engineering-2. Optical Instrument Making 5,5

Calculating and Design of Optical Instruments 6,5

Practical Training 4,5 Total 33,61 Total 34,39

Fourth Year



Political Science 1,5 Electro-Optical Instruments 4,36 Foreign Language of the Professional Direction 2,06 Laser Techniques 4

Labour Protection 1,5

Basics of Computer-Aided Design Systems Optoelectronic Devices Engineering 5

Electro-Optical Instruments 6,64 Optical Metrology 5 Calculating and Design of Optical Instruments 3

Preparation of Bachelor's Attestation Project 1,5


Elective Courses Functional Computer-Aided Design Systems in Optics 4

Digital Processing of the Signals and Image 4,5

Testing of Optical Instruments 4 Total 28,7 Total 26,3


___________________________________________________________________________ 562 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Laser and Optoelectronic Technics

Fifth Year





Theory and Calculation of Optoelectronic Devices 5,25 Intellectual Property 1

Optical Systems Designing 6,5 Television and Thermovision Optoelectronic Devices 5

Space and Aviation, Optical and Optoelectronic Devices 4,5

Theory and Calculation of Optoelectronic Devices 2,25

Registration and Information Reflecting 5

Military Optical and Optoelectronic Devices 4

Basics of Computer-Aided Design Systems Optoelectronic Devices Engineering 1 Fiber and Integrated Optics 5

Labour Protection in the Branch 1 Medical Optical and Optoelectronic Equipments 4,5

Elective Courses

Optical Metrology 2 2,5 Computer Methods of Calculations in Optics 2,5


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 563

Degree Structure for Master of Laser and Optoelectronic Technics





Theory and Calculation of Optoelectronic Devices 5,67 Intellectual Property 1 Optical Systems Designing 6,5 Science of Patent and Copyright 2 Space and Aviation, Optical and Optoelectronic Devices 4,5


Registration and Information Reflecting 5

Television and Thermovision Optoelectronic Devices 5

Basics of Computer-Aided Design Systems Optoelectronic Devices Engineering 1

Theory and Calculation of Optoelectronic Devices 1,83

Labour Protection in the Branch 1 Military Optical and Optoelectronic Devices 4

Fiber and Integrated Optics 5

Medical Optical and Optoelectronic Equipments 4,5

Elective Courses

Optical Metrology 2 2,5 Computer Methods of Calculations in Optics 2,5


Sixth Year


Pedagogics of Higher School 1,5 Preparation of Attestation Project 25,5 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 0 Mathematical Methods of Optimization 3 Diffracting Theory of Optical Systems 2,5 Optoelectronic Systems of Monitoring 2,5 Receiving and Processing of Signals in Optoelectronic Devices 2 Scientific Researches on the Subject 7,5

Total 21 Total 25,5

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF MANAGEMENT AND MARKETING

___________________________________________________________________________ www.kpi.ua 565

Faculty of Management and

Marketing

Faculty of Management and Marketing was founded in 1992 on the basis of the Department of Production Organization and Industrial Economics which was founded in 1937. The first admission of students took place in 1991.

Orientation of the scientific activity: industrial marketing, development of enterprise management on the stage of transition to market relations, economical problems of power engineering, decision-making theory.

The faculty includes 6 departments providing training of specialists according to the faculty profile and economic-managing education of future engineers at all University faculties and the Laboratory of Management.

17 professors, 63 assistance professors, 81 teachers and assistants are working at the faculty.

http://fmm.kpi.ua


___________________________________________________________________________ 566 GENERAL CATALOG 2009-2010

Speciality: Economical Cybernetics

Degree Structure for Bachelor of Economical Cybernetics

First Year


History of Ukraine 4 Psychology and Pedagogics 3 Ukrainian Language 4 Physical Training 3 Science of Law 3 Foreign Language 2

University Education 1

Mathematics for Economists 2. Algebraic and Geometrical Methods for Economists 3

Physical Education 3,5 Regional Economics (Regional Economics, Ecology) 5

Foreign Language 3 History of Economics and Economic Thought 5

Political Economics 5 Macroeconomics 5 Mathematics for Economists 1. Higher Mathematics 6

Elective Courses Economic Informatics 1. Basics of Firmware and Software 3

Economic Informatics 2. Structural and Object-Oriented Programming 3

Economic Informatics 3. Computer Technologies in Office 2,5


Second Year


Philosophy (Philosophy, Science of Religion, Logic) 6

Science of Culture (Science of Culture, Ethics, Aesthetics) 4

Physical Training 2 Sociology 3 Foreign Language 2 Physical Training 3 Microeconomics 5 Foreign Language 2,5 Finance 5 Economical Cybernetics 2 4 Economical Cybernetics 1,6 Economics of Enterprise 5 Money and Credit 5

Elective Courses Mathematics for Economists: Theory of Probabilities and Mathematical Statistics 4 Differential Equations 4,5 Discrete Analysis 3

Total 28,6 Total 31


___________________________________________________________________________ www.kpi.ua 567

Third Year


Physical Training 3 Marketing 5 Management 5 National Economics 5 Statistics 5 Economic Analysis 3

Accounting 5 Economics of Labour and Social-Labour Relations 5

International Economics 5 Office Information Systems and Technologies 4

Economic and Mathematical Modelling 5 Web-Programming 3

Functional Analysis 3 Foreign Language of the Professional Direction 2,5

Foreign Language of the Professional Direction 2,5 Introductive Practical Training 6

Elective Courses Theory of Games in Economics 2,5

Total 33,5 Total 36

Fourth Year


Political Science 1,5 System Programming 2,5

State Regulation of Economics 4 Variative Calculation and Methods of Optimization 4

Imitation Simulation 2,5 Economic Law 2 Information Systems and Technologies in Economics 4


Forecasting of Social and Economic Processes 2

Systems of Economic Information Processing 5

Economic Modelling 5 Expert Support Systems 4,5 Foreign Language of the Professional Direction 1,5 Life Safety 1,5 Economical Cybernetics 1,5 Labour Protection 1,5 Preparation of Bachelor's Thesis 1,5

Elective Courses

Modern Operation Systems 4 Theory of Information and Security of Data 4

Numeral Analysis 4,5 Total 30,5 Total 27


___________________________________________________________________________ 568 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Economical Cybernetics

Fifth Year



Modelling of Economic Dynamics 4 System Analysis 3

Expert Information and Systems in Economics 3 Mathematical Theory of Finance 3 Corporative Information Systems 3 Electronic Commerce 3,5

Efficiency of Information Systems 3 Methods of Chaotic Dynamics in Economic Models 2,5

Actuarial Calculations 3 Management Theory 3

Computer Networks 3 CASE-Modelling of Economic Systems 3,5

Basics of Interval Analysis 3 Management of Informatization Projects 4

Elective Courses

Econometrics 4,5 Mathematical Models in Management and Marketing 3


Sixth Year




Total 33 Total


___________________________________________________________________________ www.kpi.ua 569

Degree Structure for Master of Economical Cybernetics

Fifth Year



Pedagogics of Higher School 1,5 Analysis of Stock Markets and Investment Projects 3

Intellectual Property 1 Management of Informatization Projects 4

Basics of Sustainable Development 2 Management Theory 4 Finance Management 3 Electronic Commerce 3

Modern Economic Theories 3 Methods of Chaotic Dynamics in Economic Models 3

Modelling of Economic Dynamics 4 System Analysis 3

Corporative Information Systems 4 CASE-Modelling of Economic Systems 3

Finance and Actuarial Mathematics 3 Scientific Research on a Subject 3 Computer Networks 3

Elective Courses

Analysis of Economic Situations under Conditions of Uncertainty 2

Intellectual Systems of Decisions Making in Economics 2,5

Queuing Models in Economics 2 Modelling and Risk Estimate 2

Total 28,5 Total 30

Sixth Year



Modelling of System Characteristics in Economics 4

Mathematical Models of Transformational Economics 4 Preparation of Master's Thesis 21

Total 29 Total


___________________________________________________________________________ 570 GENERAL CATALOG 2009-2010

Speciality: International Economics

Degree Structure for Bachelor of International Economics

First Year


Foreign Language 1 5 Foreign Language 1 4,5 History of Ukraine 4 Psychology and Pedagogics 3,5 Ukrainian Language 4 Macroeconomics 5

Science of Law 3 History of Economics and Economic Thought 5

University Education 1

Mathematics for Economists 2. (Theory of Probabilities and Mathematical Statistics) 3,5

Political Economics 5 Economic Informatics ІІ 3 Mathematics For Economists 1. Higher Mathematics 3,5

Regional Economics (Regional Economics, Ecology) 5

Economic Informatics I 2 Engineering and Computer Graphics 3

Elective Courses Physical Education 3 Physical Education 3 Introduction to Speciality: Integrative Processes in the World Economics 1

Total 37 Total 32,5

Second Year


Foreign Language 1 5 Foreign Language 1 4,5 Philosophy 6 Science of Culture 4 Microeconomics 5 Economics of Enterprise 5 Economic and Mathematical Modelling 5 Finance 5 Finance 5 Life Safety 4 Systems of Industry Technologies 3 Business Foreign Language 2

Technical and Economic Assessment of Economic Thoughts 3,5

Elective Courses Physical Education 2 Physical Education 3

Information Systems and Technologies in Economics 3

Total 31 Total 34


___________________________________________________________________________ www.kpi.ua 571

Third Year


Finance of Enterprises 3 Econometrics 2,5 Management 5 Marketing 5 Accounting and Audit 5 Economic Analysis 3

International Economics 5 Economics of Labour and Social-Labour Relations 5

Statistics 5 National Economy 5 International Investment Activity 3 Account in Foreign Countries 5 Economy of Enterprises 2 (Investments) 3 Insurance 3 Economy of Enterprises 2 (Organization of Production) 3

Foreign Language of the Professional Direction 1 2


Elective Courses Physical Education 3


Fourth Year


Political Science 1,5 Economic Law 3 State Regulation of Economics 2 International Economic Law 3,5 International Marketing 4 Audit in Foreign Countries 2 Audit in Foreign Countries 4 International Organizations 3,5

Transnational Corporations 2 International Economic Activity of Ukraine 4

Economics of Foreign Countries 4 International Innovative Activity 2

Stock Market 2 Foreign Language of the Professional Direction 1 2

Money-and-credit Systems of Foreign Countries 2 Foreign Language of the Professional Direction 1 2

Elective Courses Electronic Commerce 1,5 National Economic Security 2

International Economic Relations 2 Foreign Language of the Professional Direction 2 2


Total 29 Total 24


___________________________________________________________________________ 572 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of International Economics

Fifth Year




Audit of Foreign Economic Activity 3

International Trade 4 Management of Enterprise's Foreign Economic Activity 3

International Investment Activity 4 Pregraduation Practical Training 4,5 Currency Transactions 4 Preparation of Graduation Thesis 15 International Economic Statistics 1,5 Finance Management 3 Strategic Management 3

Management of International Competitive Ability of Enterprise 4

Elective Courses Intellectual Property 3 Commercial Diplomacy 1,5

Total 30 Total 25,5

Degree Structure for Master of International Economics

Fifth Year


Foreign Language of the Professional Direction 2 Human Resources Management 3 Pedagogics of Higher School 1,5 International Management 3 Finance Management 4 Preparation of Diploma Project 15 Strategic Management 4 Pregraduation Project 4,5 Management of International Competitive Ability of Enterprise 4 International Strategies of Economic Development 3 International Trade 3 International Scientific and Technical Cooperation 3 Basics of Scientific Researches 2 Basics of Sustainable Development 2

Elective Courses Intellectual Property 3 Commercial Diplomacy 1,5

Total 33 Total 25,5


___________________________________________________________________________ www.kpi.ua 573

Speciality: Economics of Enterprise

Degree Structure for Bachelor of Economics of Enterprise

First Year


History of Ukraine 4 Philosophy (Philosophy, Science of Religion, Logic) 3,5

Ukrainian Language 4 Foreign Language 1 2,5 Foreign Language 1 2,5 Physical Training 3 Science of Law 3 Macroeconomics 5

Science of Culture 4

Mathematics for Economists (Higher Mathematics, Theory of Probabilities and Mathematical Statistics) 3,5

Physical Education 3 Economic Informatics 2,5 University Education 1 Regional Economy 5 Political Economics 5 Economy of Enterprise, 1 3 Mathematics for Economists (Higher Mathematics, Theory of Probabilities and Mathematical Statistics) 3,5 National Economics 5 Economic Informatics 2,5




Foreign Language 1 2,5 Philosophy (Philosophy, Science of Religion, Logic) 2,5

Physical Training 2 Foreign Language 1 2,5 Microeconomics 5 Physical Education 1 Economical History and Economical Thought 5 Sociology 3 Mathematics for Economists (Higher Mathematics, Theory of Probabilities and Mathematical Statistics) 3 Statistics 5

Economical and Mathematical Modelling 5

Economy of Enterprise (Introduction to the Speciality, Economy of Enterprise) 2,5

Economy of Enterprise (Introduction to the Speciality, Economy of Enterprise) 4,5 Money and Credit 5

Competition Ability of Product 4 Forecasting and Macroeconomic Planning 3

Government Sector of Enterprise Economics 3

Basics of Pricing 3 Total 31 Total 31


___________________________________________________________________________ 574 GENERAL CATALOG 2009-2010

Third Year


Physical Training 3 Internal Economic Mechanism of Enterprise Activity 3

Psychology 3 Investing 3 Management 5 Marketing 5

Accounting 5 Economy of Labour and Social-Labour Relations 5

International Economy 5 Finance 5 Organization of Production 5 Life Safety and Labour Protection 4

Tax System 3

Analysis of Enterprise Activity (Economical Analysis, Analysis of Industrial and Commercial Activity of Enterprise) 3,5



Practical Training 4,5 Total 34 Total 36

Fourth Year


Management 3 Political Science 2 State Regulation of Economics 2 Economic Law 4

Enterprise Activity Planning 4 Economics and Organization of Innovation Activity 4

Information Systems and Technologies 4 Strategy of Enterprise 4 Project Analysis 4 Labour Protection 1,5 Enterprise Potential and its Forming 3,5

Analysis of Modelling and Risks Management 3

Basics of Business 3 Foreign Language of the Professional Direction 3,5

Stock Market 2 Banks and Stocks 2,5 Foreign Language of the Professional Direction 1,94

Elective Courses Applied Software 4 Logistics 3

Total 31 Total 27,5


___________________________________________________________________________ www.kpi.ua 575

Degree Structure for Specialist of Economics of Enterprise

Fifth Year


Finance Management 3

Economics and Organization of Corporate Businesses Activity of Enterprise 0

Strategic Management of Enterprise 4 Economic Diagnostics 3 Economics and Organization of Corporate Businesses Activity of Enterprise 4 Pregraduation Practical Training 6 Projects Management 4 Graduation Thesis Projecting 13,5 Enterprises Potential Management 4 Management Accounting 2,5 Financial Services Market 2,5 Intellectual Property 1,5

Elective Courses Methodology of Economic Researches 3 Anti-Crisis Management 3

Total 29 Total 25,5

Degree Structure for Master of Economics of Enterprise

Fifth Year


Intellectual Property 1,5 Economic Diagnostics 3 Pedagogics of Higher School 1,5 International Management 3 Finance Management 3 Anti-crisis Management 2,5 Strategy Management of Enterprise 3 Human Resources Management 3 Project Management 3 Administrative Account 2 Enterprises Potential Management 3 Pregraduation Practical Training 12 Human Resources Management 3 Graduation Thesis Projecting 6 Economics and Organization of Corporate Businesses Activity of Enterprise 3 Financial Services Market 2,5

Elective Courses Methodology of Economic Researches 2 Management Accounting 2,5 Basics Sustainable Society's Development 2



___________________________________________________________________________ 576 GENERAL CATALOG 2009-2010

Speciality: Marketing

Degree Structure for Bachelor of Marketing

First Year


Science of Culture (Science of Culture, Ethics, Aesthetics) 4

Philosophy (Philosophy, Science of Religion, Logic) 3,5

Ukrainian Language 4 Foreign Language 2,5 Foreign Language 2,5 Macroeconomics 5

Science of Law 3 Mathematics for Economists: Higher Mathematics 3,5

History of Ukraine 4 Economic Informatics 5

University Education 1 Marketing: Introduction to Speciality 3

Political Economics 5 National Economics 5

Mathematics for Economists: Higher Mathematics 3,5

Regional Economics (Human Resources, Regional Economics, Ecology) 5

Economic Informatics 2,5 Physical Education 3 Physical Education 3

Total 35 Total 35,5

Second Year


Foreign Language 2,5 Philosophy (Philosophy, Science of Religion, Logic) 2,5

Microeconomics 5 Foreign Language 2,5 History of Economics and Economic Thought 5 Sociology 3 Mathematics for Economists: Theory of Probability and Mathematical Statistics 3 Statistics 5 Economic and Mathematical Modelling 5 Money and Credit 5 Marketing: Fundamental Marketing 7 Economics of Enterprise 5 Systems of Technologies in Industry 3

Service and Equipment Maintenance

Physical Education 2 Physical Education 3 Economical Analysis 3

Total 32,5 Total 32


___________________________________________________________________________ www.kpi.ua 577

Third Year


Psychology and Pedagogics 3 Life Safety and Labour Protection 3 Management 5 Finance 5 Finance of Enterprises 2,5 Science of Risk 3

Accounting and Audit 5 Economics of Labour and Social-Labour Relations 5

International Economics 5 Infrastructure of Commodity Market 6

Industrial Marketing 5 Marketing Researches 5 Foreign Language of the Professional Direction 1,5


Physical Education 3 Intercultural Behaviour in Business 2 Practical Training 4,5

Elective Courses European Integration 2

Total 32 Total 35

Fourth Year


State Regulation of Economics 2,5 Political Science 3 Marketing Trade Politics 3 Economic Law 2 Commodity Research 3 Marketing Communication Politics 2,5 Foreign Language of the Professional Direction 1,5 International Marketing 2,5 Management Accounting 2,5 Marketing Price Politics 3 Risk Management 3 Logistics 3

Industrial Service Organization 3 Foreign Language of the Professional Direction 1,92

Statistical Method's of Marketing 4 Sales Promotion 2,5

Services Marketing 2,5 Preparation and Defence of Attestation Projects 4,5

Public Relations 2 Elective Courses

Cross-Cultural Business Behaviour 1 Second Foreign Language 1,92 Second Foreign Language 1,86 Electronic Commerce 2



___________________________________________________________________________ 578 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Marketing

Fifth Year


Commercial Activity of Agent Enterprises 3,5 Pregraduation Practical Training 6 Standardization and Certification of Goods and Services 3

Preparation and Defence of Attestation Projects 24

Consumers Strategy 3 Strategy Management 3 Advertising Management 3 Commodity Innovation Politics 2,5 Marketing Politics of Distribution 3 Marketing Management 3 Intellectual Property 1

Elective Courses Business Forecasting 2,5 Innovation Strategies of Enterprise 2,5

Total 30 Total 30

Degree Structure for Master of Marketing



Pedagogics of Higher School 1,5 Investigation of Consumer Motivations 2,5

Basics of Society's Sustainable Development 2 Brand-Management 2,5 Finance Management 3 Scientific Practical Training 4,5 International Management 2,5 Pedagogical Practical Training 4,5 Marketing Management 3 Preparation of Graduation Thesis 16 Human Research 3 Strategic Management 3 Commodity Innovation Politics 3 Publicity Management 3 Marketing Politics of Distribution 3 Basics of Scientific Researches in Economics 2

Total 29 Total 29


___________________________________________________________________________ www.kpi.ua 579

Speciality: Management of Organizations


First Year


Ukrainian Language 1 Philosophy 3 Science of Law 2,5 Sociology 2 Foreign Language 2 Foreign Language 2


Higher Mathematics (Integral Calculus and Differential Equations) 5,5

Higher Mathematics (Basics of Mathematical Analysis and Analytical Geometry) 5

Economic Theory (Macroeconomics) 3

Economic Theory (Basics of Economic Theory) 4,5

Information Science, Computer Engineering and Telecommunications (Basics of Software Engineering ) 4,5

Information Science, Computer Engineering and Telecommunications (Basics of Software) 3 Enterprise and Working Law 5,5 Engineering and Computer Graphics 3,5

Basics of Design, Construction and Modelling 3

Physical and Chemical Basics of Technological Processes 4,5

Elective Courses Foreign Language ІІ 2

Total 27,5 Total 34


Course Title Credit Course Title Credit Philosophy (Logic, Science of Religion, Ethics, Aesthetics) 1,5 Foreign Language 2 Science of Culture 1 Econometrics 3 Foreign Language 2 Statistics 6 Higher Mathematics (Theory of Probabilities and Mathematical Statistics) 3

Systems of Technologies (Technological Processes of the Basic Industry Fields) 4

Mathematical Programming and Operation Research 5 Finance (State Finance) 5 Economic Theory (Microeconomics) 5,5 Economics of Enterprise 5,5 Information Science and Computer Engineering (Computer Networks and Telecommunications) 2,5 Economic Forecasting 4 Systems of Technologies 3,5 Basics of Management (Introduction to Management) 4

Elective Courses Physical Education 3 Physical Education 3 Foreign Language ІІ 2 Foreign Language ІІ 2

Total 28 Total 30


___________________________________________________________________________ 580 GENERAL CATALOG 2009-2010

Third Year



Foreign Language 2 Foreign Language 2 Ecology 2 Marketing 5 Finance (Finance of Enterprise) 4 Operation Management 5 Accounting 6 Human Resources Management 2 4 International Economical Relationships 3,5 Basics of Foreign Trade Activities 4,5 Basics of Management 6 Economical Analysis 4 Information Systems in Management 2 4,5 Risks Ruling 3 Practical Training 4,5

Elective Courses

Foreign Language ІІ 2 Technical and Programmer Means of Modern Office 2

Physical Education 3 Foreign Language ІІ 2

Total 33 Total 35

Fourth Year



Political Science 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 Bank and Stock Activity 2 4 Innovation Management 6 Organizational Design 4 Strategy Management 4,5 Electronic Business 4 Logistics 4,5 Pregraduation Practical Training 6 Controling 4 Prepararion of Diploma Project 4,5 Management of Business Processes 4

Management of Quality and Standardization 4

Elective Courses Foreign Language ІІ 2 Enterprise and Private Business 2 Business Communications 2 Foreign Language ІІ 2

Total 32,5 Total 32


___________________________________________________________________________ www.kpi.ua 581

Degree Structure for Specialist of Management of Organizations

Fifth Year



Psychology of Management and Conflictology 3 Pregraduation Practical Training 3 Management of Organization 4 Practical Training by Occupation 9 Financial Management 4 Preparation of Thesis 15 Intellectual Property 2 Basics of Management Consulting 3 Project Management 4 Human Resources Management 4

Elective Courses

Information Technologies in Management 3 Marketing Researches 3

Total 30 Total 27

Degree Structure for Master of Management of Organizations

Fifth Year



Psychology of Management and Conflictology 3 Pregraduation Practical Training 3 Management of Organization 4 Practical Training by Occupation 6 Financial Management 4 Preparation of Master's Thesis 15 Intellectual Property 2

Methodology and Organization of Scientific Researches 1,5 Pedagogics of Higher School 1,5 Project Management 4 Human Resources Management 4

Elective Courses

Information Technologies in Management 3 Marketing Researches 3 Basics of Sustainable Development 2

Total 32 Total 27


___________________________________________________________________________ 582 GENERAL CATALOG 2009-2010

Speciality: International Business Management


First Year


Psychology 2,5 Philosophy 3 Ukrainian Language 1 Sociology 2 Science of Law 2,5 Foreign Language 2

Foreign Language 2


History of Ukraine 1,5 Economic Theory (Macroeconomics) 3


Information Science, Computer Engineering and Telecommunications (Basics of Programming) 4,5

Economic Theory (Basics of Economic Theory) 4,5 Entrepreneurial and Working Law 5 Information Science, Computer Engineering and Telecommunications (Basics of Firmware) 3

Basics of Design, Construction and Modelling 3,5

Engineering and Computer Graphics 3,5 Physical and Chemical Basics of Technological Processes 4,5

Elective Courses Foreign Language ІІ 2,5

Total 30 Total 34


___________________________________________________________________________ www.kpi.ua 583

Second Year


Philosophy (Logic, Science of Religion, Ethics, Aesthetics) 1,5 Foreign Language 2 Science of Culture 1 Econometrics 3 Foreign Language ІІ 2 Statistics 6 Higher Mathematics (Theory of Probability and Mathematical Statistics) 3

Systems of Technologies (Technical Processes of the Main Industry Field 4

Mathematical Programming and Operation Research 5 Finance (Government Finance) 5 Economic Theory (Microeconomics) 5,5 Economics of Enterprise 5,5 Information Science and Computer Engineering (Computer Networks and Telecommunications) 2 Economic Forecasting 4 Systems of Technologies 3,5 Basics of Management (Introduction to Management) 3

Elective Courses Physical Training 3 Physical Training 3 Foreign Language ІІ 2 Foreign Language ІІ 2

Total 28 Total 34,5

Third Year



Foreign Language 2 Foreign Language 2 Ecology 2 Marketing 8 Finance (Finance of Enterprise) 4 Operation Management 5 Accounting 6 Human Resources Management 2 4 International Economic Relationships 3,5 Basics of Foreign Trade Activity 4,5 Basics of Management 6 Economical Analysis 4 Risk Management 3 Practical Training 4,5

Elective Courses

Foreign Language ІІ 2 Technical and Software Tools of Present-Day Office 2

Physical Training 3 Foreign Language ІІ 2

Total 28,5 Total 39


___________________________________________________________________________ 584 GENERAL CATALOG 2009-2010

Fourth Year



Political Science 1,5 Life Safety and Labour Protection 3,5 Foreign Language 2 International Trade 4 Innovation Management 6 Customs Procedures 4 Strategy Management 4,5 Electronic Business 4 Logistics 4,5 Pregraduation Practical Training 6 Controling 4 Preparation of Graduation Thesis 4,5 Management of Business Processes 4 Management of Quality and Standardization 4

Elective Courses Foreign Language ІІ 2 Enterprise and Private Business 2 Business Communications 2 Foreign Language ІІ 2

Total 31,5 Total 32


___________________________________________________________________________ www.kpi.ua 585

Degree Structure for Specialist of International Business Management

Fifth Year



International Marketing 3 Practical Training by Occupation 9

International Credit-Calculations and Currency Relations 4 Pregraduation Practical Training 3 International Business Management 4 Preparation of Graduation Thesis 15 Intellectual Property 2

Logistical Support of International Business 3 International Management 4 Financial Management 4

Elective Courses Electronic Business 3 International Banking 3

Total 30 Total 27

Degree Structure for Master of International Business Management

Fifth Year



International Marketing 3 Pregraduation Practical Training 3

International Credit-Calculations and Currency Relations 4 Practical Training by Occupation 9 International Business Management 4 Preparation of Master's Thesis 15 Intellectual Property 2

Methodology and Organization of Scientific Researches 1,5 Pedagogics of Higher School 1,5 International Management 4 Finance Management 4

Elective Courses Project Management 3 International Banking 3 Basics of Sustainable Development 2

Total 32 Total 27


___________________________________________________________________________ 586 GENERAL CATALOG 2009-2010

Speciality: Management of Innovative Activity


First Year



Psychology 2,5 Philosophy 3 Ukrainian Language 1 Sociology 2 Science of Law 2,5 Foreign Language 2

Foreign Language 2


History of Ukraine 1,5 Economic Theory (Macroeconomics) 3


Information Science, Computer Engineering and Telecommunications (Basics of Programming) 4,5

Economic Theory (Basics of Economic Theory) 4,5 Enterprise and Working Law 5,5 Information Science, Computer Engineering and Telecommunications (Basics of Firmware) 3

Basics of Design, Construction and Modelling 3,5


Physical and Chemical Basics of Technological Processes 4,5

Elective Courses Physical Training 3 Physical Training 3 Foreign Language ІІ 2,5

Total 33 Total 34,5


___________________________________________________________________________ www.kpi.ua 587

Second Year


Philosophy (Logic, Science of Religion, Ethics, Aesthetics) 1,5 Foreign Language 2 Science of Culture 1 Econometrics 3 Foreign Language 2 Statistics 6 Higher Mathematics (Theory of Probabilities and Mathematical Statistics) 3

Technologies Systems (Technological Processes of the Main Industry Branch) 4

Mathematical Programming and Operation Research 5 Finance (State Finance) 5 Economic Theory (Microeconomics) 5,5 Economics of Enterprise 5,5 Information Science and Computer Engineering (Computer Networks and Telecommunications) 2,5 Economic Forecasting 4 Systems of Technologies 3,5 Basics of Management (Introduction to Management) 4

Elective Courses Physical Training 3 Physical Training 3 Foreign Language ІІ 2 Foreign Language ІІ 2

Total 28 Total 3

Third Year


Foreign Language 2 Foreign Language 2 Ecology 2 Marketing 5 Finance 4 Operation Management 5 Accounting 6 Human Resources Management 2 4 International Economical Relationships 3,5 Basics of Foreign Trade Activities 4,5 Basics of Management 6 Economical Analysis 4 Information Systems in Management 2 4,5 Risks Ruling 3 Practical Training 4,5

Elective Courses Foreign Language ІІ 2 Physical Training 2 Foreign Language ІІ 2

Total 30 Total 36


___________________________________________________________________________ 588 GENERAL CATALOG 2009-2010

Degree Structure for Master of Management of Innovative Activity

Fifth Year



Methodology and Organization of Scientific Research 1,5 Transfer of Technologies 4

Innovative Economics 3,5

Strategical Management of Enterprise's Innovation Development 4

Intellectual Property 3 Finance Management 3

Information Systems in Innovative Activity 3 Creative Management 3

Management of Process Development and Production Mastering Process for New Product 3 Management of Innovation Projects 4

Marketing of Innovations 4 Logistical Support of Innovation Activity 4

International Management 4 Ecological Management 4 Pedagogics of Higher School 1,5 Quality of Management 3

Elective Courses Modelling of Innovative Processes 3 Design and Ergonomics 3 Basics of Sustainable Development 2 Management of Venture Business 3

Total 28,5 Total 35

Sixth Year



Practical Training by Occupation 12 Preparation of Master's Thesis 15

Total 27 Total


___________________________________________________________________________ www.kpi.ua 589

Speciality: Innovative Activity Management

Degree Structure for Master of Innovative Activity Management

Fifth Year



Innovative Enterprises Economics 3 System Analysis and Innovative Decisions Making 3

Innovation Management 3,5 Creative Management 4 Intellectual Property 3 Finance Management 4

Marketing of Innovations 4

Strategy Management of Enterprise's Innovative Development 4

Information Systems in Innovative Activity 3

Logistical Support of Innovative Activity 3

Operation Management 4 Management of Quality 3 Finance of Innovative Enterprise 3 Ecological Management 3

Management of Process Development and Production Mastering Process for New Product 3

Elective Courses

Modelling of Innovative Processes 3 Human Resources Management of Innovative Enterprise 3

Basics of Sustainable Development 2 Management of Venture Business 3

Total 32 Total 30

Sixth Year


Course Title Credit Course Title Credit Methodology of Scientific Researches 1,5 Technologies Transfer 4 Innovative Projects Management 4,5 International Management 4 Design and Ergonomics 2,5 Pedagogics of Higher School 1,5 Practical Training by Occupation 6 Preparation of Master's Thesis 6

Total 30 Total

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF BIOTECHNOLOGY AND BIOENGINEERING

___________________________________________________________________________ www.kpi.ua 591

Faculty of Biotechnology and

Bioengineering

Faculty of Biotechnology and Bioengineering was founded in 2001.

The Faculty provides training of scientific and pedagogical personnel of highest qualification, cooperates with profile scientific-research institutions and establishments of the National Academy of Sciences of Ukraine, Academy of Medical Science, Ukrainian Academy of Agrarian Science, maintaining scientific and educational relationships with foreign universities, leading regional scientific and industrial associations and profile international organizations.

The Faculty carries out fundamental, searching and applied scientific and technical research, conducts research and design in the field of biotechnology and bioengineering of microbial synthesis, ecobiotechnology, cellular and genetic engineering biotechnology in close connection with studies process.

Around 38 teachers are working at the faculty; among them are 1 corresponding member, 13 doctors and 17 PhDs.

The graduates are successfully working in different industrial branches: in biopharmaceutics, ecology, food and processing industry, agriculture, and also in scientific research institutes of National Academy of Sciences of Ukraine.

http://biotech.kpi.ua


___________________________________________________________________________ 592 GENERAL CATALOG 2009-2010

Speciality: Equipment of Pharmaceutical and

Microbiological Industry




Foreign Language 2 Foreign Language 2 Ukrainian Language 1 Philosophy 2 1 Science of Culture 1 History of Ukraine 1,5 Higher Mathematics 1. Elements of Linear Equipment Algebra, Analytic Geometry and Differential Equations 5,5 Chemistry 4

Technology of Constructional Materials and Material Science 4,5

Higher Mathematics 2. Integral Calculus and Functions of Many Variables 5,5

Descriptive Geometry, Engineering and Computer Graphics-1. Descriptive Geometry 3,5

Descriptive Geometry, Engineering and Computer Graphics-2. Engineering and Computer Graphics 2

Computer Science-1. 5

Physics 1. Mechanics. Molecular Physics and Thermodynamics. Electrostatic Field 5,5

Introduction to Speciality 2,5 Theoretical Mechanics-1. Statics 6 General Biology 3

Elective Courses Modelling Basics 4,5 Basics of Bioinformatics 3,5

Total 28 Total 35,5


___________________________________________________________________________ www.kpi.ua 593

Second Year


Foreign Language 2 Foreign Language 2 Physical Training 1 Philosophy 1 2,5 Ecology 2 Physical Training 1,5 Physics-1. Mechanics. Molecular Physics and Thermodynamics. Electrostatic Field 5,5

Resistance of Materials-2.Basics of Tense and Deformed States Theory 3

Higher Mathematics 3. Rows, Basics of Vectorial Analysis. 6

Theory of Mechanisms and Machines-1. Structure and Kinematics of Mechanisms 5,5


Interchangeability, Standardization and Technical Measurings 3

Resistance of Materials-1. Deformations of Simple Bodies. 4

Basics of Industrial Biotechnology and Pharmaceutics-1 4

Biochemistry-1. The First Part 3 Equipments for FMP Packaging and Packing 5

Theoretical Fundamentals of Cultivation of Microorganisms 5

Elective Courses Biophysics 3



___________________________________________________________________________ 594 GENERAL CATALOG 2009-2010

Third Year



Sociology 1,5 Details of Machines 2. Assembly of Details and Machines 3

Physical Training 1 Foreign Language of the Professional Direction 2

Theory of Mechanisms and Machines 2. Dynamics of Mechanisms 4

Calculation and Constructing of Standard Equipments-1. Thick-Walled Vessels and Apparatus 4,5

Details of Machines 1. Calculation and Constructional Details of Machines 3,5 Life Safety and Labour Protection 3,5

Electrical Engineering and Basics of Electronics. 3

Processes and Apparatus of Pharmaceutical and Microbiological Industry-2. Hydrodynamic, Mechanical and Mass Exchange Processes 5,5

Theoretical Basics of Heating Engineering 3 Industrial Practical Training 4,5 Hydraulics, Hydro- and Pneumatic Drive 4

Membrane Processes of Biotechnology 4

Foreign Language of the Professional Direction 1,5 Basics of Industrial Biotechnology and Pharmacy 4 Electric Drive and Electrical Equipment 3 Processes and Equipments of Pharmaceutical and Microbiological Industry-1. The Theoretical Fundamentals of Transfer Processes. Thermal Processes 5

Elective Courses Analytical Mechanics 4

Modern Trends in Development of New Areas of Pharmaceutical and Microbiological Productions Technology 3,5

Total 35 Total 36,5


___________________________________________________________________________ www.kpi.ua 595

Fourth Year


Foreign Language of the Professional Direction 1,5 Science of Law 2 Lifting-and-Shifting Machines 3 Political Science 1,5 Theory of Automated Control-2. Analysis of Automated Control Multidimensional Systems 3,5


Mathematical Physics-2. Methods of Theory 2,5

Processes and Equipments of Pharmaceutical and Microbiological Industry-2. Hydrodynamic, Mechanical and Mass Exchange Processes 7

Theoretical Basics of Biotechnological Processes 2 Biochemistry-2. The Second Part 2 Processes and Equipments of Pharmaceutical and Microbiological Industry-1. Theoretical Fundamentals of Transfer Processes. Thermal Processes. 4,5

Basics of Biomedical Application of High-Gradient Magnetic Filtration-2. 2

Biochemistry 1. The First Part. 1,5

Calculation and Constructing of Standard Equipments-2. Supports and Locking Devices. Heat-Exchange Apparatus 3,5

Basics of Biomedical Application of High-Gradient Magnetic Filtration-1. Main Principles of High-Gradient Magnetic Filtration 2,5

Basics of Industrial Biotechnology and Pharmaceutics 3,5

Calculation and Constructing of Standard Equipments-1.Thick-Walled Vessels and Apparatus. 3,5 Preparation of Attestation Project 1,5 Economy and Management of Biotechnological Industry 5,5

Elective Courses Biometric Informatics 2 Biophysics 1,5 Analytical Mechanics 2

Total 34 Total 27,5


___________________________________________________________________________ 596 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Equipment of Pharmaceutical and

Microbiological Industry

Fifth Year



Marketing 1,5 Basics of Business 3 Basics of Business 0 Foreign Language 1

Foreign Language 1 Reactors of Biotechnological Industries 4

Continuous Lines for Tableting, Dosage, Packing of Medicinal Preparations 4

Equipment of Membrane and Refrigerating Equipments 4

Robotic Systems and Complexes FMР 4

Calculation and Constructing of Special Equipments-1. Constructing and Calculation of Thick-Walled Vessels 2

Calculation and Constructing of Special Equipment-1. Constructing and Calculation of Thick-Walled Vessels 4

Technology of Machines and Apparatus Engineering 2

Technology of Machines and Apparatus Engineering 2

Equipments for Biotechnological Water Treatment 4

Equipments of Heat and Mass Exchange-1. 2,5 Intellectual Property 1

Automation of Pharmaceutical and Microbiological Industries 4 Pregraduation Practical Training 12 Labour Protection in the Branch 1,5 Preparation of Graduation Thesis 21

Elective Courses

Devices and Systems of Non-Destructive Control 4

Repair and Editing of Pharmaceutical and Microbiological Equipments 1,5




___________________________________________________________________________ www.kpi.ua 597

Degree Structure for Master of Equipment of Pharmaceutical and Microbiological Industry

Fifth Year


Marketing 1,5 Basics of Business 3


Continuous Lines for Tableting, Dosage, Packing of Medicinal Preparations 4,5 Foreign Language 1 Robotic Systems and Complexes FMР 4,5

Reactors of Biotechnological Industries 4

Calculation and Constructing of Special Equipment-1. Constructing and Calculation of Thick-Walled Vessels 3

Equipment of Membrane and Refrigerating Equipments 4

Equipments of Heat and Mass Exchange-1 3

Equipments for Biotechnological Water Treatment 4

Automation of Pharmaceutical and Microbiological Industries 4,5

Calculation and Constructing of Special Equipment-2. Constructing and Calculation of Mixing Devices 3

Basics of Scientific Researches 2 Equipments of Heat and Mass Exchange-2 2,5




Certification and Standardization of Pharmaceutical and Microbiological Equipments 2,5

Total 32,5 Total 27



Pedagogics of Higher School 1,5 Scientific Researches on the Subject 7,5

Science of Patent and Copyright 2 Preparation of Attestation Project 25,5 Basics of Society's Sustainable Development 2 Mathematical Modelling of Systems and Processes 3 Mathematical Methods of Optimization 3 Biotechnological Methods and Equipments of Alternative Power Mediums Productions 3

Total 14,5 Total 33


___________________________________________________________________________ 598 GENERAL CATALOG 2009-2010

Speciality: Industrial Biotechnology

Degree Structure for Bachelor of Biotechnology

First Year


Foreign Language 2 Foreign Language 2 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Philosophy 2 1 Higher Mathematics 1. Elements of Linear Algebra, Geometry and Differential Equations 5,5

Higher Mathematics-2. Integral Calculus and Differential Equations 5,5

Physics-1. Mechanics, Molecular Physics and Thermodynamics 5,5

Physics 2. Electric Field and its Characteristics. Magnetic Field and its Characteristics. Optics 5,5

Chemistry 1. General and Inorganic Chemistry 7 Chemistry-2. Analytical Chemistry 6

Cell Biology 4 Engineering and Computer Graphics 5,5

Human and Animals Physiology 4 Plants Anatomy and Physiology 4,5 Total 30 Total 31,5

Second Year


Foreign Language 0 Foreign Language 4 Ecology 2 Philosophy 1 2,5

Chemistry 3. Organic Chemistry 8

General Microbiology and Virology-2. Metabolism of Procariot. Virology 6

Computational Mathematics and Programming 5 Biochemistry 8

Applied Mechanics 4

Processes and-Equipments of Biotechnological Productions 1. Electrical Engineering and Basics of Electronics 4

General Microbiology and Virology-1. Functional Cytology Procariot 5 Biogenic Chemistry 4

Biophysics 4 Methods of Experimental Data Processing in Biotechnology 5

Total 28 Total 33,5


___________________________________________________________________________ www.kpi.ua 599

Third Year



Sociology 1,5 Foreign Language of the Professional Direction 1,75

Chemistry 4. Physical and Colloid Chemistry 7 Life Safety and Labour Protection 3,5


Processes and Equipments of Biotechnological Productions-3. Hydromechanical and Mass Exchanged Processes 5

Processes and Equipments of Biotechnological Productions-2. Heat Processes 5 Genetics-2. Molecular Genetics 4

Genetics-1. General Genetics 3

General Biotechnology 2. Industrial Production of Biotechnological Products 4

General Biotechnology-1. Basics of Biotechnological Processes 3 Industrial Practical Training 2,25 Industrial Practical Training 2,25 General Immunology 5 Methods of Biotechnological Production Analysis. 4

Elective Courses Theoretical Basics of Biotechnology 4

Biology of Perfumery-Cosmetic Means 3

Mycology Basics 2,5 Total 33 Total 33

Elective Courses: Biophysical and Biocolloid Chemistry 4 Nanobiotechnology 3 Valeology 2,5

Total 4 Total 5,5


___________________________________________________________________________ 600 GENERAL CATALOG 2009-2010

Fourth Year


Foreign Language of the Professional Direction 2 Science of Law 2 Science of Innovation and Protection of Intellectual Property in Biotechnology and Pharmacy 2,5 Political Science 1,5 Standard Maintenance of Biotechnological Productions 3


Economics and Organization of Biotechnological Industry 5,5

Biology of Perfumery-Cosmetic Means 4

Ecobiotechnology 5 Designing Basics 5,5 Automation and Control of Biotechnological Production 4 Labour Protection 1,5

Preparation of Thesis 1,5 Basics of Pharmaceutical Productions 5

Elective Courses Basics of Scientific Researches 1. Statistical Processing of Experimental Data 6

Basics of Scientific Researches-2. Planning of Extremal Experiment 4,5

Biotechnology of Food Productions 3 Biotechnology of Farm Enterprises 3 Total 32,5 Total 29


___________________________________________________________________________ www.kpi.ua 601

Degree Structure for Specialist of Industrial Biotechnology

Fifth Year



Marketing 1,5 Foreign Language 1 Foreign Language 1 Intellectual Property 1 Labour Protection in the Branch 1,5 Basics of Business 3 Genetic Engineering in Biotechnology 5 Biotechnology of Antibiotics 4,5

Technology of Microbial Syntheses Products 4,5

Biotechnology of Plant and Animal Cell 3

Industrial Enzymology 5 Basics of Cellular Technology in Biology and Medicine 4,5

Designing of Pharmaceutical and Biotechnological Productions 3

Large Practical Work on Biotechnology 5

Elective Courses Immunobiotechnology 2 Protein Engineering 1,5 Medical Biotechnology 3,5 Biosafety and Bioethics 2

Total 27 Total 25,5

Sixth Year




Total 33 Total


___________________________________________________________________________ 602 GENERAL CATALOG 2009-2010

Degree Structure for Master of Industrial Biotechnology


Course Title Credit Course Title Credit Marketing 1,5 Foreign Language 1 Foreign Language 1 Intellectual Property 1 Labour Protection in the Branch 1,5 Basics of Business 3 Genetic Engineering in Biotechnology 5


Technology of Microbial Syntheses Products 4,5 Biotechnology of Antibiotics 4,5

Industrial Enzymology 5 Biotechnology of Plant and Animal Cell 3

Designing of Pharmaceutical and Biotechnological Productions 3

Basics of Cellular Technology in Biology and Medicine 4,5

Basics of Scientific Researches 2 Large Practical Work on Biotechnology 5

Elective Courses Immunobiotechnology 2 Protein Engineering 1,5 Medical Biotechnology 3,5 Biosafety and Bioethics 2

Total 29 Total 27 Elective Courses: Nanobiotechnology 2 Ecological Engineering 1,5 Basics of Bioenergetics 3,5 Biological Sensory Systems 2 Bioinformatics 3 Basics of Mycology 3


Sixth Year


Pedagogics of Higher School 1,5 Scientific Research on the Subject 7,5 Science of Patent and Copyright 2 Preparation of Thesis 25,5 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Mathematical Modelling of Systems and Processes 3 Scientific Research and Industrial Realization Software of Biotechnologies 3 Problems of Modern Biotechnology 3 Scientific Research on the Subject 7,5 Expres-analysis in Biotechnology, Ecology, Control of Production Quality 5,5

Total 30,5 Total 33


___________________________________________________________________________ www.kpi.ua 603

Speciality: Environmental Biotechnology

Degree Structure for Bachelor of Biotechnology

First Year


Foreign Language 2 Foreign Language 2 Science of Culture 1 History of Ukraine 1,5 Ukrainian Language 1 Philosophy 1 Higher Mathematics 1. Elements of Linear Equipment Algebra, Analytic Geometry and Differential Equations 5,5

Higher Mathematics 2. Integral Calculus and Common Differential Equations 5,5

Physics 1. Mechanics, Molecular Physics and Thermodynamics 5,5

Physics 2. Electric Field and Its Characteristics. Magnite Field and Its Characteristics 5,5

Chemistry 1. General and Nonorganic Chemistry 7 Chemistry 2. Analytical Chemistry 6

Cell Biology 4 Engineering and Computer Graphics 5,5

Physiology of Man and Animals 4 Anatomy and Physiology of Plants 4,5 Total 30 Total 31,5

Second Year


Foreign Language 2 Foreign Language 2 Ecology 2 Philosophy 2,5

Chemistry 3. Organic Chemistry 8

General Microbiology and Virology-2. Metabolism of Procariotic Organisms. Virology 6

Computational Mathematics and Programming 5 Biochemistry 8

Applied Mechanics 4

Processes and Equipments of Biotechnological Productions-1. Electrical Engineering and Basics of Electronics 4

General Microbiology and Virology-1. Functional Cytology Procaryote 5 Chemistry of Biogenous Elements 4

Biophysics 4

Processing Methods of Experimental Data in Biotechnology 5

Total 30 Total 31,5


___________________________________________________________________________ 604 GENERAL CATALOG 2009-2010

Third Year



Sociology 1,5

Processes and Equipments of Biotechnological Productions-3. Hydromechanical and Mass Exchange Processes 5

Chemistry-4. Physical and Colloid Chemistry 7


Processes and Equipments of Biotechnological Productions-2. Thermal Processes 5 Genetics-2. Molecular Genetics 4

Genetics 1. General Genetics 3

General Biotechnology-2. Industrial Manufacturing of Biotechnological Production 4

General Biotechnology-1. Basics of Biotechnological Processes 3 Technological Practical Training 4,5 Foreign Language of the Professional Direction 1,75 Life Safety and Labour Protection 3,5 Methods for Analysis of Environmental Biotechnological Productions 4

Basics of Environmental Biotechnology 5

Elective Courses Ecological Toxicology 4 Ecological Audit and Expertise 3

Biological and Physicochemical Methods of Biomass Conversion 2,5


Basics of Hydroecology. Biotesting 4 Biophysical and Biochemical Chemistry 2,5

Environment Monitoring. Biosensors 3

Total 4 Total 5,5


___________________________________________________________________________ www.kpi.ua 605

Fourth Year



Automation and Control of Biotechnological Production 4 Science of Law 2

Economics and Organization of Biotechnological Industry 5,5 Political Science 1,5

Normative Maintenance of Biotechnological Productions 3 Ecological Toxicology 5

Biotechnologies of Water Treatment and Enrichment of Mineral Raw Material 6 Basics of Bioenergetics. 5,5

Foreign Language of the Professional Direction 2 Preparation of Bachelor's Thesis 1,5


Labour Protection in the Branch 1,5 Designing Basics 5,5

Elective Courses

Ecology of Biotechnological Productions 6

Basics of Scientific Research. Planning of Extremal Experiment 4,5

Basics of Scientific Research-1. Statistical Processing of Experimental Data 6

Total 32,5 Total 29


___________________________________________________________________________ 606 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Environmental Biotechnology

Fifth Year



Foreign Language 1 Foreign Language 1 Marketing 1,5 Basics of Business 4

Labour Protection in the Branch 1,5 Biological and Chemical Sensory Systems 5

Equipment and Projecting of Biotechnological Nature Protection Complexes 8,5 Biochemistry of Xenobiotics 6

Biotechnologies of Domestic Waste Processing 5 Intellectual Property 1 Ecological Assessment 3 Bioaccumulation Technologies 6

Express Analysis in Biotechnology and Ecology, Production Quality Control (Assessment) 6 Environment Monitoring 3 Basics of Scientific Researches 2

Elective Courses Bioenergetics of Living Systems 3 Biosafety and Bioethics 1,5

Production Certification, Standardization and Licensing 1,5

Management of Nature Conservation Activity 3

Total 33 Total 30,5

Elective Courses:

Conversion Biotechnologies of Waste with Diverse Origin in Biogas and Hydrogen 3 Ecological Engineering 1,5

Electrochemical Aspects of Bioenergetics 1,5 Environment Protection 3

Total 4,5 Total 4,5


___________________________________________________________________________ www.kpi.ua 607

Degree Structure for Master of Environmental Biotechnology



Foreign Language 1 Foreign Language 1 Marketing 1,5 Basics of Business 3


Equipment and Projecting of Biotechnological Nature Conservation Complexes 8,5 Intellectual Property 1 Biotechnologies of Domestic Waste Processing 5

Biological and Chemical Sensory Systems 5

Ecological Assessment 3 Biochemistry of Xenobiotics 6 Express Analysis in Biotechnology and Ecology, Production Quality Control (Assessment) 6 Bioaccumulation Technologies 6 Basics of Scientific Researches 2 Environment Monitoring 3

Elective Courses Bioenergetics of Living Systems 3 Biosafety and Bioethics 1,5 Production Certification, Standardization and Licensing 1,5

Management of Nature Conservation Activity 3

Total 33 Total 31

Elective Courses:

Conversion Biotechnologies of Waste with Diverse Origin in Biogas and Hydrogen 3 Ecological Engineering 1,5 Electrochemical Aspects of Bioenergetics 1,5 Environment Protection 3

Total 4,5 Total 4,5


___________________________________________________________________________ 608 GENERAL CATALOG 2009-2010

Sixth Year


Pedagogics of Higher School 1,5 Science of Patent and Copyright 2 Basics of Society's Sustainable Development 2 Mathematical Methods of Optimization 3 Mathematical Modelling of Systems and Processes 3 Hydrobiology 4 Biotechnology of Plants 3 Bioengineering 3 Scientific Research on the Subject 7,5

Total 29 Total 33

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF LINGUISTICS

___________________________________________________________________________ www.kpi.ua 609

Faculty of Linguistics

The Faculty of Linguistics was founded at the National University of Ukraine “KPI” in 1995.

The main direction of the faculty activities is to combine foreign languages studies with the immersion in the sphere of engineering and economics. The faculty prepares highly qualified translators of scientific, technical and business literature, who work fruitfully in different fields of economy and business in Ukraine. Having profound knowledge of two foreign languages, their technical and business aspects in particular, our graduates are indispensable for communicating with foreign specialist not only at different international conferences and negotiations but for work at modern international structures and joint ventures as well.

FL directs our best graduates to work as ESP teachers at all the faculties and institutions of the “KPI”. At interuniversity students conferences students-linguists and students-polytechnics approbate their diploma papers in foreign languages.

The educational process involves highly qualified staff of scientists, lectures and teaches. The powerful stimulus for the faculty activities was well-known programme TEMPUS-TACIS. Under this programme 50 teachers attended refreshing courses abroad and the faculty has received scientific and methodological works done by the staff and substantial number of modern books, manuals, reference books and dictionaries by foreign publishing houses.

FL has modern technical basis: multimedia classrooms, audio and video equipment, which helps effective professional education.

Foreign teachers and lectures are often deliver lectures and lessons; different activities with authentic speakers are also organized at the faculty. Thus our students always have the possibility of communication with foreigners to improve their foreign language. Some of our students continue their education abroad under the programmes of ‘students exchange’.


___________________________________________________________________________ 610 GENERAL CATALOG 2009-2010

Graduates of the faculty can also get the additional qualification of the foreign language teacher.

Human life is a moment in the history of mankind. How many engineers have been studying at the ‘KPI’, that is more than 100 years old? It was the experience of delivering foreign languages to the polytechnic students of so many years that built the background of the faculty of linguistics foundation. This is a faculty which meets the needs of modern life and has great future.

http://fl.kpi.ua


___________________________________________________________________________ www.kpi.ua 611

Speciality: Translation

Degree Structure for Bachelor of Philology

First Year

First Term Second Term Course Name Credit Course Name Credit

Contemporary Ukrainian Language 3 History of Ukraine 1,5 Introductory Course of Linguistics 3

Philosophy (Ethics, Aesthetics, Science of Religion, Logic) 1,5

Latin 3 Science of Culture 1 History of the Foreign Literature 2 Contemporary Ukrainian Language 2 The English (German, French) Language (practical course, target language) 8

The Theory of Language Communication 3

Comparative Grammar 5 Latin 3 Mathematics 1 History of the Foreign Literature 2

Physics 1 The German Language (practical course, target language) 7

Chemistry 1

Practical Course of the Second (German, English, French) Language 6

Comparative Grammar 4 Optional Course

Information Technologies in Translation 3

Total 30 Total 31

Second Year First Term Second Term

Course Name Credit Course Name Credit Ecology 2 Philosophy 3

History of the Foreign Literature 2 Contemporary Ukrainian Literature 2

Linguistic and Country Studies 3 Translation Studies Fundamentals 4 The English (French, German) Language (practical course, target language) 9 History of the Foreign Literature 2 Practical Course of the Second (German, English, French) Language 7 History of Translation 2

Comparative Grammar 4

The English (French, German)Language (practical course, target language) 9

Basics of Management and Marketing 1

Practical Course of the Second (German, French, English) Language 8

Optional Course Ukrainian and Foreign Culture 1

Total 29 Total 30


___________________________________________________________________________ 612 GENERAL CATALOG 2009-2010

Third Year


Psychology 2 Economic Theory 3

Sociology 2

Comparative Lexicology of the English (French, German) and Ukrainian Languages 2

History of the Foreign Literature 2 Safety and Labour Protection 3,5

History of the English (French, German) Language 1,5

The English (French, German) Language (practical course, target language) 9




The English (French, German) Language Practical Translation Course 7

The English (German, French) Language Practical Translation Course 5 Practical Training (Translation) 4,5

Optional Course Basics of Scientific Researches 3

Total 30,5 Total 36


___________________________________________________________________________ www.kpi.ua 613

Fourth Year


The English (French, German) Language (practical course, target language) 6,06 Science of Law 2 Practical Course of the Second (German, French, English) Language 5,83 Political Science 1,5 The English (French, German) Language Practical Translation Course 6 Translation Studies Fundamentals 1 Labour Protection 1,5

The English (French, German) Language (practical course, target language) 5,39

Practical Course of the Second (German, French, English) Language 5,22

Comparative Stylistics of the English (French, German) and Ukrainian Languages 1,5

The English (French, German) Language Practical Translation Course 7,08

Optional Course Translation and Editing of Commercial Documents 1 Translation Editing Fundamentals 1



___________________________________________________________________________ 614 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Translation

Fifth Year

First Term Second Term

Course Name Credit Course Name Credit


The English (French, German) Language (practical course, target language) 2,25


Practical Course of the Second (German, French, English) Language 2,25

The German Language Practical Translation Course 5

The English (French, German) Language Practical Translation Course 2,5

The Theory of Translation 3 Intellectual Property 1 Written Translation of Different Texts 1 Translation Practice 6 Oral Translation and its Feature 1 Preparation of Thesis 13,5

Optional Course Translation of Business and Technical Documents 3 Neology of the English (French, German) Language 1 System Organization of Language 2

Total 28 Total 27,5

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KYIV POLY TECHNIC INSTITUTE” FACULTY OF SOCIOLOGY AND LAW

___________________________________________________________________________ www.kpi.ua 615

Faculty of Sociology and Law

Faculty of Sociology and Law trains specialists in Administrative Management enabling them to manage business and to plan the economy in all-level State government research and in Public affairs. Specialists of the field “Social Work” work with different social, age, religious and ethnographic groups as well as with individuals who need social help and protection.

The faculty includes the following departments: the Department of Philosophy, the Department of Political Science and Sociology and the Department of Psychology and Pedagogics.

The main scientific work fields of the Department of Philosophy are methodological, social and historical field of society; social philosophy and philosophy of history; history of phenomenology in transformations of culture; philosophic problems of the scientific knowledge; transformational forms and methods of management in context of modern social contradictions.

Considering the demands of the economic development and prospects of specialization in economy, the Faculty has implemented its program of lawyers training in professional direction: “Business Law” and “Incorporeal Right”.

The graduates of the Faculty are working in executive authorities, law machinery and in other state and commercial institutions.

http://fsp.kpi.ua


___________________________________________________________________________ 616 GENERAL CATALOG 2009-2010

Speciality: Social Work

Degree Structure for Bachelor of Social Science

First Year


History 1. History of Ukraine 3 Science of Culture 3 Ukrainian Language 1 Science of Religion 3 Science of Culture 2 Sociology 5 Economic Theory 4 Social Psychology 3 Sociology 2 Information Technology 3 Psychology 4 Foreign Language 2 Logic 2 Sociology of Family 3,5 Foreign Language 2 Sociology of Personality 3 Methodology of Students' Independent Work Organization 2 History of Philosophy 3 History of Philosophy 2 Higher Mathematics 2,5 Higher Mathematics 2,5

Elective Courses Rhetoric 2 Philosophical Thought in Ukraine 2

Total 30,5 Total 31

Second Year


Philosophy 3 Philosophy 2 Political Science 2 Political Science 4 History-2. World History of the XX Century 2 Foreign Language 2 Theory of State and Law 4 Sociology of Work 3,5 Information Technologies 4 Microeconomics 2

Ecology 2 Sociology of Organization and Management 4

Foreign Language 2 Sociology of Upbringing and Education 4

Sociology of Organization and Management 2 History of Sociology 4

History of Sociology 3 Mathematical Methods of Social Researches 4

Applied Statistics 3 Conceptions of Contemporary Nature Science 2

Theory of Probabilities 3 Total 30 Total 31,5


___________________________________________________________________________ www.kpi.ua 617

Third Year


Ethics 2 Aesthetics 3 Social Philosophy 2 Social Philosophy 3 Civil Law 1,5 Basics of Pedagogy 3 Conflictology 4 Sociology of Young People 4 Modern Sociological Theories 4 Introduction to Speciality 3 Theory of Social Work 4 History of Social Work 3,5

Age-Specific Psychology 1,5

Methodology, Methods and Technology of Sociological Researches 5

History of Social Work 3 Sociology of Deviant Behavior 3 Methodology, Methods and Technology of Sociological Researches 3 Foreign Language 2 Social Modelling and Forecasting 1,5 Practical Training 4,5 Foreign Language 2 Labour Protection and Life Safety 3,5


Fourth Year


Demography 3 Social Gerontology 2 Working Law 2 Family Law 1,5 Social Pedagogics 3 Social Insurance and Pension Plan 1,5 Economics of Social Work 4 Ethnology 4 Deontology and Ethics of Social Work 4 Sociology of Gender 4

Psychodiagnostics 4

Sociology of Occupational Adaptation and Success of Graduates 2

Paper Work in Social Work 2 Social Problems of Innovations 2 Business Communication and Public Relations in Social Work 3


Foreign Language 2 Sociology of Public Thought 2 Practical Training 4

Elective Courses Political Leadership 3 Volunteer Movement 2

Total 30 Total 28


___________________________________________________________________________ 618 GENERAL CATALOG 2009-2010

Degree Structure for Specialist of Social Work

Fifth Year



Social Policy 5 Pregraduation Practical Training 8 Intellectual Property and its Legal Basis 1 Preparation of Thesis 22 Management of Social Work 5 Foreign Language 2 Psychorehabilitation of Social Workers 4 Innovation Technologies in Social Work 3 Social Work with Children and Teenagers 2 Social Work with Young People 3 Social Work with Women and Family 3 Psychocorrection 2

Total 30 Total 30


___________________________________________________________________________ www.kpi.ua 619

Degree Structure for Master of Social Work

Fifth Year


Philosophic Problems of Scientific Knowledge 1,5 Social Policy 4 Foreign Language 1 Foreign Language 1 Intellectual Property and its Legal Basis 1

Methodology of Scientific Researches 2

Higher Education and Bologna Process 2 Science of Patent and Copyright 2

Pedagogics of Higher School 1,5 Methods and Technologies of Social Work 3


Social Work with Women and Family 2

Methods and Technologies of Social Work 2

Bioethical Models of Social Worker and Client Relation 4

Social Work with Young People, Children and Teenagers 3

Legal Security of Social Work in Ukraine 3

Psychocorrection 2 Scientific Researches on Topic 3,5 Social Work Management 4 Psychorehabilitation of Social Workers 3 Scientific Researches on Topic 3,5 Pedagogical Practical Training 4

Elective Courses

Methodology of Social Work Trainings 2

Mass Media in Social Work 3 Total 30,5 Total 29,5

Sixth Year


Research Scientific Practical Training 4,5 Preparation of Master's Attestation Project 25,5

Total 30 Total


___________________________________________________________________________ 620 GENERAL CATALOG 2009-2010

Speciality: Administrative Management

Degree Structure for Bachelor of Social Science

First Year


History of Ukraine 2 Science of Culture 2,5 Ukrainian Language 1 Science of Religion 3 Science of Culture 2,5 Sociology 5 Economic Theory 4 Social Psychology 3 Sociology 2 Information Technologies 3 Psychology 4 Higher Mathematics 2,5 Logic 3 Foreign Language 2

Higher Mathematics 2,5 Economics (Microeconomics and Macroeconomics) 3

Introduction to Speciality 2 Sociology of Personality 3 Foreign Language 2 History of Philosophy 3 History of Philosophy 2,5 Rhetoric 2 Philosophical Thought in Ukraine 2

Total 31,5 Total 30


Course Title Credit Course Title Credit Political Science 2,5 Political Science 3,5 Theory of State and Law 4 Philosophy 3 Philosophy 3 History of Sociology 3,5

History of Sociology 3,5 Conceptions of Contemporary Nature Science 2

Information Technologies 4 Foreign Language 2 Theory of Probability and Mathematical Statistics 3 Applied Statistics 3

Ecology 2 Sociology of Organization and Management 3,5

Foreign Language 2 Mathematical Methods of Social Researches 3,5

Sociology of Organization and Management 2,5 Sociology of Work 3 World History of the XX Century 2 Dialectical Logic 3

Elective Courses Gender Researches 3

Total 31,5 Total 30 Elective Courses: Basics of Radio Engineering*** 3

Total Total 3


___________________________________________________________________________ www.kpi.ua 621

Third Year


Social Philosophy 2 Basics of Pedagogy 3 Foreign Language 2 Aesthetics 3 Basics of Management 3 Social Philosophy 3 State Management 5 Foreign Language 2 Conflictology 4 Life and Labour Safety 3,5 Methodology, Methods and Technology of Sociological Research 3,25 Basics of Management 4

Business Communication 2

Methodology, Methods and Technology of Sociological Research 4,75

History of State Administration in Ukraine 3 Sociology of Young People 3 Civil Law 2 Practical Training 4,5 Audit, Financial and Management Accounting 3 Imagology 2,5 Valeology 2 Creative Technologies 2


Fourth Year


Foreign Language 2 Government Services 3 Marketing in Social Sphere 2 Marketing in Social Sphere 2,5 Management of People Resources 2 Management in State Organizations 3 Working Law 2 Social Forecasting 3 Management Psychology 4 Gender Researches 3 Paper Work 2,5 Modern Sociological Theories 3 Social Technologies in Administrative Management 4 Life and Labour Safety 1,5 Political Leadership 2 Sociology of Culture 2

Total 22,5 Total 19


___________________________________________________________________________ 622 GENERAL CATALOG 2009-2010

Degree Structure for Master of Administrative Management

Fifth Year



General Basics of Patents and Copyright 2

Pedagogics of Higher School 1,5 Foreign Language 0,94 Foreign Language 1,06 Corporative Culture 4 Social Science of Culture 4 Basics of Scientific Research 2 Intellectual Property and its Legal Security 1 Social Policy 2

Basics of Sustainable Development 2 Government Management of Social-Culture Sphere 4,5

Mathematical Modelling of Social Systems and Processes 2 Public Relations 4,5

Philosophy of Social Management 4 Mathematical Models of Decision Making Support Systems 2

Municipal Management 2 Scientific Researches on Topic 3,5 Administrative Law 4 Scientific Researches on Topic 4

Elective Courses Management of Higher Education 2 Basics of Insurance Business 2 Philosophy of Education 2 Social Anthropology 2 Practical Rhetoric 2 Sociology of Economics 2 Basics of Entrepreneurship 1,5 Project Management 1,5


Sixth Year


Scientific Practice 4,5 Preparation of Master's Attestation Project 25,5

Total 30 Total


___________________________________________________________________________ www.kpi.ua 623

Speciality: Law Science

Degree Structure for Bachelor of Law Science

First Year



Juridical Deontology 1 Philosophy (Ethics and Aesthetics, Religion Science, Logics) 1,5

Theory of State and Law 4 Science of Culture 1 Theory of State and Law of Ukraine 3 Theory of State and Law 5 Theory of State and Law of Foreign Countries 5

Theory of State and Law of Ukraine 4

Justice in Ukraine 2 Justice in Ukraine 5 Constitutional Law of Ukraine 3 Constitutional Law of Ukraine 5

Logic 4 Basics of Informatics and Computer Science 3

Basics of Informatics and Computer Science 2 Basics of Roman Civil Law 3,5 Legal Ethics 3

Total 30 Total 31,5

Second Year


Foreign Language 2 Philosophy 3 State Law of Foreign Countries 4 Foreign Language 2 Environmental and Land Law 4 Civil Law 5 Civil Law 3 Criminal Law 5 Criminal Law 3 Administrative Law 4 Administrative Law 4 International Law 3 Family Law 4 Agrarian Law 3,5 Basics of Management 3 Law of Property 3 The Culture of Parol 3 Customs Law 3

Total 30 Total 31,5


___________________________________________________________________________ 624 GENERAL CATALOG 2009-2010

Third Year


Psychology 2 Economic Theory 3 Sociology 2 Foreign Language 2 Foreign Language 2 Civil Law 5 Civil Law 3 Criminal Law 4,5 Criminal Law 3 Criminal and Procedural Law 4 Criminal and Procedural Law 3 Civil and Procedural Law 3 International Law 4 Practical Training 3 Public Prosecutor's Office in Ukraine 4 Life Safety and Labour Protection 3,5 The Advocacy in Ukraine 4 Forensic Accounting 2

Specialization Legal Basics of Entrepreneurship 3 Commercial Law 2

Total 30 Total 32 Specialization: Protection of Intellectual Property Rights 3 Legal Regulation of Copy Right 2

Total 3 Total 2



Political Science 1,5 Foreign Language of Professional Direction 1,97

Foreign Language of Professional Direction 1,92 Labour Law 2,97 Finance Law 3 Criminalistics 2,97 Labour Law 3,03 Economic Procedural Law 3 Criminalistics 3,03 Economic Law 3

International Law 3 Labour Protection and its Legal Legulation 3

Notarial System in Ukraine 3 Law of Industrial Property 3 Criminology 3 Customs Law 3 Forensic Accounting 1,5 Administrative Responsibility and Procedure 4,5

Elective Courses Legal Status of State Officials 4,5

Legal System of Ukraine (Present Time) 4,5

Total 27,48 Total 31,91 Specialization:

Competitive and Antimonopoly Law 3

Total Total 3


___________________________________________________________________________ www.kpi.ua 625

Degree Structure for Specialist of Law Science

Fifth Year


Social Security Law 3 State and Law at Present Stage 1,5

Prosecutor's Office in Ukraine 3 The Problems of Criminality in Criminal Law 1,5

Tax Law 3 Right of Obligation under Civil Law 1,5

Studies History of State and Law 3 State Supervision of Labour Legislation Compliance 1,5

Forensic Medicine 3 Topical Issues of Criminal and Civil Procedure 1,5

Forensic Expertise 3 Pregraduation Practical Training 12 Legal Regulation of Copy Right 3 Protection of Intellectual Property Right 3 Criminal Law of Foreign Countries 3 Intellectual Property 0,5

Total 27,5 Total 19,5 Specialization: Commercial Law 3 Legal Basics of Entrepreneurship 3

Total 6 Total