GeN 2 ® NITROGEN GENERATOR BLENDED GAS MIXER Dispensing draft beer with a mixed gas blend of Carbon Dioxide (CO 2 ) and Nitrogen (N 2 ) helps ensure the correct presentation and flavor. Quality draft beer requires a precise, consistent supply of Nitrogen and Carbon Dioxide. Chart’s GeN 2 ® Nitrogen Generator coupled with a Carbo-Mizer® Bulk CO 2 tank is the ideal system to provide the correct blended gas mix. This system provides a reliable, uninterrupted flow of individual or mixed gas and eliminates the need to change out smaller high pressure cylinders. The GeN 2 system brings industry leading technology to the nitrogen generator for dependable, accurate, and cost effective operation. • MICROBREWERIES • BREW PUBS • RESTAURANTS • BARS PRODUCT HIGHLIGHTS • Proven, continuous flow rate, rotary PSA system provides quick response to surge demands and eliminates the need for a large capacity N 2 storage tank • Heavy duty compressor has a long lifecycle and is easy to maintain • Integrated, small five gallon surge tank reduces footprint and simplifies installation • Double hinged doors allow easy access for maintenance • Sleek, modern look blends with site decor • Self-diagnostic system helps service technicians identify scheduled maintenance or repairs Beverage Systems
2
Embed
GeN2 NITROGEN GENERATOR BLENDED GAS MIXER …files.chartindustries.com/20832858_GeN2.pdf · GeN 2 ®NITROGEN GENERATOR BLENDED GAS MIXER Dispensing draft beer with a mixed gas blend
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GeN2® NITROGEN GENERATOR
B L E N D E D G A S M I X E R
Dispensing draft beer with a mixed gas blend of
Carbon Dioxide (CO2) and Nitrogen (N2) helps
ensure the correct presentation and flavor. Quality
draft beer requires a precise, consistent supply
of Nitrogen and Carbon Dioxide. Chart’s GeN2®
Nitrogen Generator coupled with a Carbo-Mizer®
Bulk CO2 tank is the ideal system to provide the
correct blended gas mix. This system provides
a reliable, uninterrupted flow of individual or
mixed gas and eliminates the need to change out
smaller high pressure cylinders. The GeN2 system
brings industry leading technology to the nitrogen
generator for dependable, accurate, and cost
effective operation.
• MICROBREWERIES • BREW PUBS • RESTAURANTS • BARS
PRODUCT HIGHLIGHTS• Proven, continuous flow rate, rotary PSA system provides quick response to surge demands and eliminates the need for a large capacity N
2 storage
tank• Heavy duty compressor has a long lifecycle and is easy to maintain• Integrated, small five gallon surge tank reduces footprint and simplifies installation• Double hinged doors allow easy access for maintenance• Sleek, modern look blends with site decor• Self-diagnostic system helps service technicians identify scheduled maintenance or repairs
A INITIAL RELEASE NDG REV APPV ECR REVISION DESCRIPTION BY DATE
A
CHART INDUSTRIES, INC.CANTON, GEORGIA 30114
ORIGINAL ECR / ER
B-20786084DRAWING NO.
1 OF 11:16
NDG
B-20786084
N2 GENERATOR FINAL ASSEMBLYUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005
PROJ.ENGR.
CHECKED BY
DRAWN BY
REV:
DO NOT SCALEDRAWING
SHEET:SCALE:
DRAWING NO.
TITLE:
APP'VD DATE
PROJECT:
THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.
# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.
MAT'L
FINISH P/N
20786084
A INITIAL RELEASE REV APPV ECR REVISION DESCRIPTION BY DATE
NOMENCLATUREITEM DESCRIPTION PART NUMBER BUB SEQ #
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005
PROJ.ENGR.
CHECKED BY
DRAWN BY
REV:
DO NOT SCALEDRAWING
SHEET:SCALE:
DRAWING NO.
TITLE:
APP'VD DATE
PROJECT:
THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.
# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.
A-Draw1
Draw1
PT
PT
EXTERNAL
PT-2
PT-1
V-8
V-7
V-6
V-5
V-4
V-3
B-1
N2CO2PI-2PI-1
M-1
ATF-1
T-1RV-2
V-2
V-1
AD-1
HE-1
C-1RV-1
F-1
S-1
V-9
A INITIAL RELEASE NDG REV APPV ECR REVISION DESCRIPTION BY DATE
RV-1 RELIEF VALVE, COMPRESSOR 20807543RV-2 RELIEF VALVE, TANK 20807543PI-1 PRESSURE INDICATOR, N2 20839423PI-2 PRESSURE INDICATOR, CO2 20806240T-1 SURGE TANK 20783899C-1 COMPRESSOR 20806217B-1 BLENDER 20786777
ATF-1 ATF 20752316M-1 N2 MANIFOLD 20839425HE-1 HEAT EXCHANGER, COIL HOSE 20806216AD-1 AIR DRYER 20806235PT-1 PRESSURE TRANSDUCER, COMPRESSOR N/APT-2 PRESSURE TRANSDUCER, TANK N/AF-1 AIR FILTER, COMPRESSOR 20808765S-1 SOLENOID VALVE 20856046
A
CHART INDUSTRIES, INC.CANTON, GEORGIA 30114
ORIGINAL ECR / ER
B-Draw1DRAWING NO.
1 OF 11:2
NDG
B-Draw1
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHES.TOLERANCES:FRACTIONS 1/16"ANGLES 11 PLACE DECIMAL .0302 PLACE DECIMAL .0153 PLACE DECIMAL .005
PROJ.ENGR.
CHECKED BY
DRAWN BY
REV:
DO NOT SCALEDRAWING
SHEET:SCALE:
DRAWING NO.
TITLE:
APP'VD DATE
PROJECT:
THE MATERIALS AND INFORMATION, INCLUDING THE PRINCIPLES OF DESIGN PRESENTED BY THIS PRINT, IS THE EXCLUSIVE PROPERTY OF CHART INC., AND IS CONFIDENTIAL INFORMATION. ACCORDINGLY, THIS INFORMATION IS SUBMITTED TO YOU WITH THE AGREEMENT THAT IT IS NOT TO BE REPRODUCED, COPIED, OR LOANED, IN PART OR IN WHOLE, NOR IS THE INFORMATION TO BE RELAYED TO ANY COMPANY. ACCEPTANCE OF THIS DRAWING WILL BE CONSTRUED AS AN AGREEMENT TO THE ABOVE.
# DESIGNATES A NOTE REFERENCE X.X DESIGNATES INSPECTION DIM.