a division of DNOW • Eliminate Over Injection • Eliminate Emissions • Improve Safety • Reduce Maintenance • Save Money • Get Automated • Enhance Production HOW TO SAVE MONEY Reduce maintenance expense • No elastomers or packing to tighten • Designed with chemical universality in mind. 100% Teflon based seals. Compatible with nealy all fluids. • Secondary seal eliminates chemical leaks and clean up • Same pump can be used in many applications Reduce chemical injected • Accurate to extremely low rates ( <0.1 L/Dday 0.1 Q/day) • One pump can inject two different chemicals accurately into multiple points. Reduce well downtime • Quick removal and fluid-end replacement even in extreme weather TECHNICAL SPECIFICATIONS • Pump and motor Class 1 Div. 1 exposion proof • 1 HP motor, 230 VAC 3 phase • Pump Type – positive displacemnt offset cam • Pump rates 0.1 to 2000 L/day (2,113 Q/day) • Maximum Output Pressure: 30 MPa (4,350 psi) • Wetted Parts: Stainless steel (model dependent) • Seal Material: Teflon only TS&M Head Office Box 28, 314 Kensington Ave. Estevan, SK S4A 2A2 Canada 306-634-6494 www.tsmsupply.com Comet pump and AC motor GEMINI CHEMICAL INJECTION SYSTEM
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
a division of DNOW
• Eliminate Over Injection
• Eliminate Emissions
• Improve Safety
• Reduce Maintenance
• Save Money
• Get Automated
• Enhance Production
HOW TO SAVE MONEY
Reduce maintenance expense
• No elastomers or packing to tighten
• Designed with chemical universality in mind.
100% Teflon based seals. Compatible with nealy all fluids.
• Secondary seal eliminates chemical leaks and clean up
• Same pump can be used in many applications
Reduce chemical injected
• Accurate to extremely low rates ( <0.1 L/Dday 0.1 Q/day)
• One pump can inject two different chemicals accurately into
multiple points.
Reduce well downtime
• Quick removal and fluid-end replacement even in extreme
weather
TECHNICAL SPECIFICATIONS
• Pump and motor Class 1 Div. 1 exposion proof
• 1 HP motor, 230 VAC 3 phase
• Pump Type – positive displacemnt offset cam
• Pump rates 0.1 to 2000 L/day (2,113 Q/day)
• Maximum Output Pressure: 30 MPa (4,350 psi)
• Wetted Parts: Stainless steel (model dependent)
• Seal Material: Teflon only
TS&M Head Office Box 28, 314 Kensington Ave. Estevan, SK S4A 2A2 Canada 306-634-6494 www.tsmsupply.com
Comet pump and AC motor
GEMINI CHEMICAL INJECTION SYSTEM
a division of DNOW
GEMINI VARIABLE SPEED AC CONTROLLER
• Electronic speed control for your ac pump
• Direct control of volume in L/day or Q/day
• Save chemical and accurately change volume in seconds
• Inteface AC pump to SCADA system for ESD and on-off
• Auto-restart after power failure
• Operating temperature -40o C/F to +50o C/122o F
• 12” x 12” NEMA4 lockable enclosure is standard for indoor or
outdoor mounting locations
• Area Classification (Class 1 Division 2)
• 4-20 mA control
• RS85 MODBUS interface option
• Input power options: (into Control panel)
• A: 110-240 VCA 1ph
• B: 208-240 VCA 3ph
• C: 400-480 VCA 3ph
Set your controller to the rate you want … done!
No manual adjustments and wasted manpower.
HOW TO SAVE MONEY AND REDUCE OPERATOR TIME
• Elimnate chemical over injection
• No mechanical adjustments to set flow
• Direct rate input in L/day (Q/day)
• Analog/Digital input for control
• SCADA compatible
FEATURES
• Dual pump head with ability to pump one or two fluids at two
different rates with one pump
• Up to seven injection points are possible with a single pump
• Long life metal to metal check values - no soft seats to wear
out
• Designed with Chemical Universality in mind - 100% Teflon
based seals compatible with nearly every chemical.
• No elastomers
• Secondary seal on main piston. When the main seal starts to
TS&M Head Office Box 28, 314 Kensington Ave. Estevan, SK S4A 2A2 Canada 306-634-6494 www.tsmsupply.com