Gel Transfers This is a classic and low-tech method for transferring images and it requires minimal materials. In Chapter 2, this technique is referenced in both New From Old and Dreamy. 1 Apply soft gloss gel to the surface you are going to transfer to. 2 Lightly spray the laser or toner print of your image with water. 3 While both are still wet, place the image face down onto the surface and rub all over to ensure adequate adhesion. Be careful not to get gel on the back of the image you are transferring. Allow to dry overnight. 4 Mist the back of the transfer- ring image with water. 5 Rub off the paper. A piece of brown craft paper is especially helpful in removing those last bits of paper 6 You can also apply gentle pressure with your fingers to remove the paper backing from your transferred image. 4