This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Sanitary Systems Catalogue 2014/2015 131
Geberit Taps & Flush systems
Description
Overview
• System overview flush control urinal → Page 132
• System overview flush control WC, electronic → Page 149
• System overview flush control WC, pneumatic → Page 164
• System overview lavatory taps → Page 168
Flush control urinal
automaticinfrared
• Sigma10, stainless steel cover → Page 133
• Sigma01 → Page 134
• Bolero → Page 135
• Tango → Page 136
• Sigma10 → Page 137
• Sigma50 → Page 138
• Basic → Page 143
• Exposed → Page 146
temperature and flow sensor • Hidden → Page 143
manual pneumatic
• Sigma10, stainless steel cover → Page 139
• Sigma01 → Page 139
• Bolero → Page 140
• Tango → Page 140
• Sigma10 → Page 139
• Sigma50 → Page 141
Flush control WC
automatic infrared• Sigma80 → Page 155
• Sigma10 → Page 156
manual
push button• wired → Page 159
• radio → Page 162
pull down rail• wired → Page 159
• radio → Page 160
pneumatic • Hand-operated → Page 165
pneumatic • Foot-operated → Page 167
Taps for washbasinautomatic
infrared• Lavatory tap type 185/186 → Page 169
• Lavatory tap type 87/88 → Page 175
generator • Lavatory tap type 185/186 → Page 179
manual hydraulic • Self-closing tap type 26 → Page 181
Urinal partition• Urinal division made from glass → Page 183
• Urinal division, plastic → Page 183
Accessories• for urinal and WC electronic → Page 147
• for WC control → Page 163
132 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Overview
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Nominal voltage 110 - 240 V AC
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Operating pressure 1 - 8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Article no. Colour
116.021.11.5 white alpine
116.021.21.5 bright chrome-plated
116.021.46.5 matt chrome-plated
13
13
09
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery typeLithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Operating pressure 1 - 8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Article no. Colour
116.031.11.5 white alpine
116.031.21.5 bright chrome-plated
116.031.46.5 matt chrome-plated
13
13
09
Geberit Taps & Flush systemsUrinal electronic - infrared Flush control
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Protection degree IP 45
Nominal voltage 110 - 240 V AC
Operating voltage 4.5 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.022.11.1 white alpine
116.022.21.1 bright chrome-plated
116.022.46.1 matt chrome-plated
13
13
12
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Battery type Lithium battery 1.5 V (AA)
Lifetime alkaline battery ~ 1.5 years
Lifetime lithium battery ~ 2 years
Power consumption < 0.5 W
Protection degree IP 45
Operating voltage 3 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.032.11.1 white alpine
116.032.21.1 bright chrome-plated
116.032.46.1 matt chrome-plated
13
13
12
136 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Urinal electronic - infrared
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Protection degree IP 45
Nominal voltage 110 - 240 V AC
Operating voltage 4.5 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.024.11.1 white alpine
116.024.21.1 bright chrome-plated
116.024.46.1 matt chrome-plated
13
13
08
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Battery type Lithium battery 1.5 V (AA)
Lifetime alkaline battery ~ 1.5 years
Lifetime lithium battery ~ 2 years
Power consumption < 0.5 W
Protection degree IP 45
Operating voltage 3 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.034.11.1 white alpine
116.034.21.1 bright chrome-plated
116.034.46.1 matt chrome-plated
13
13
08
Geberit Taps & Flush systemsUrinal electronic - infrared Flush control
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Protection degree IP 45
Nominal voltage 110 - 240 V AC
Operating voltage 4.5 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.025.KH.1 bright chrome / matt chrome / bright chrome
116.025.KJ.1 white / bright chrome / white
116.025.KK.1 white / gold-plated / white
116.025.KL.1 white / matt chrome / matt chrome
116.025.KM.1 black / bright chrome / black
116.025.KN.1 matt chrome / bright chrome / matt chrome
13
13
1
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Battery type Lithium battery 1.5 V (AA)
Lifetime alkaline battery ~ 1.5 years
Lifetime lithium battery ~ 2 years
Power consumption < 0.5 W
Protection degree IP 45
Operating voltage 3 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.035.KH.1 bright chrome / matt chrome / bright chrome
116.035.KJ.1 white / bright chrome / white
116.035.KK.1 white / gold-plated / white
116.035.KL.1 white / matt chrome / matt chrome
116.035.KM.1 black / bright chrome / black
116.035.KN.1 matt chrome / bright chrome / matt chrome
13
13
1
138 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Urinal electronic - infrared
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
• For automatic flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with top actuation
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Warning if the battery is low• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Protection degree IP 45
Nominal voltage 110 - 240 V AC
Operating voltage 4.5 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.026.GH.1 brushed chrome
13
13
1
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Battery type Lithium battery 1.5 V (AA)
Lifetime alkaline battery ~ 1.5 years
Lifetime lithium battery ~ 2 years
Power consumption < 0.5 W
Protection degree IP 45
Operating voltage 3 V DC
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Operating pressure 1 - 8 bar
Article no. Colour
116.036.GH.1 brushed chrome
13
13
1
Geberit Taps & Flush systemsUrinal pneumatic Flush control
• For installation in urinal installation set• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Stainless steel actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Sigma01
Application Purpose
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Plastic actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Geberit Taps & Flush systemsFlush control Urinal pneumatic
Geberit urinal flush control, pneumatic, Bolero
Application Purpose
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Plastic actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Tango
Application Purpose
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Die-cast zinc actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Actuation force < 12 N
Flush time adjustment range 4 / 8 / 12 s
Operating pressure 1 - 8 bar
Article no. Colour
116.012.11.1 white alpine
116.012.21.1 bright chrome-plated
116.012.46.1 matt chrome-plated
13
13
12
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Actuation force < 12 N
Flush time adjustment range 4 / 8 / 12 s
Operating pressure 1 - 8 bar
Article no. Colour
116.014.11.1 white alpine
116.014.21.1 bright chrome-plated
116.014.46.1 matt chrome-plated
13
13
11
Geberit Taps & Flush systemsUrinal pneumatic Flush control
Sanitary Systems Catalogue 2014/2015 141
Geberit urinal flush control, pneumatic, Sigma10
Application Purpose
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Plastic actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Sigma50
Application Purpose
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Die-cast zinc actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Actuation force < 12 N
Flush time adjustment range 4 / 8 / 12 s
Operating pressure 1 - 8 bar
Article no. Colour
116.015.KH.1 bright chrome / matt chrome / bright chrome
116.015.KJ.1 white / bright chrome / white
116.015.KK.1 white / gold-plated / white
116.015.KL.1 white / matt chrome / matt chrome
116.015.KM.1 black / bright chrome / black
116.015.KN.1 matt chrome / bright chrome / matt chrome
13
13
13
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0.24 l/s
Operating pressure 1 - 8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Flush time adjustment range 4 / 8 / 12 s
Calculated flow rate 0,3 l/s
Article no. a[cm]
Colour
116.016.11.5 1,11 white alpine
116.016.DW.5 1,11 jet black RAL 9005
116.016.SD.5 1,21 smoked glass reflective
116.016.SE.5 1,21 green glass satinised
116.016.SQ.5 1,21 umber glass
116.016.GH.5 1,01 brushed chrome
116.016.00.5 0,81 customised
13
13
a
142 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Urinal pneumatic
• For manual flush actuation of urinals• For installation in urinal installation elements with front actuation• For installation in urinal installation elements with top actuation• For installation in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Die-cast zinc actuator plate, with securing bar
Product Details
Scope Of Delivery
• Actuator plate• Pneumatic control, pre-mounted on mounting frame• Pneumatic valve• Fastening material
Ordering Information
Flow limiter for Geberit urinal flush control electronic/pneumatic
Application Purpose
• For meeting the requirements of tap group II of acoustics standard DIN EN ISO 3822-1
• For reducing the flow rate
Ordering Information
Installation set for Geberit urinal flush control, Universal, brass nipple
Application Purpose
• For concealed installation in solid constructions• For accommodating the Geberit urinal flush controls, electronic /
pneumatic, with cover plates 13 x 13 cm
Characteristics
• Water supply connection at the top• Water supply connection 1/2"• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• Nipple for flush pipe made of brass• Flush pipe can be plugged or screwed onto nipple• The protection cover protects the servicing opening against moisture
and dirt • Protection cover for service opening, can be cut to length
Product Details
Scope Of Delivery
• Concealed housing with water section• Protection box with cover• Water supply connection R 1/2"
• For automatic flush actuation of urinals• For automatic and hidden flush actuation of urinals• For installation in urinal installation set• Not suitable for installation in Joly urinal installation element with lateral
concealed housing • Not suitable for installation in installation elements with electronic or
pneumatic actuation
Characteristics
• Automatic flush actuation• Hidden user detection• Vandal-resistant• Not affected by external factors• Electrical power supply via power supply• Ready for operation after mains connection• Adjustable flushing time• Functions can be adjusted and queried with Geberit Service Handy• Flush volume can be reduced up to 0.5 l per flush via throttle of
installation set• Flush actuator can be deactivated by Geberit Clean Handy
Product Details
Scope Of Delivery
• Solenoid valve• Power supply unit• Electronics module, pre-mounted on mounting frame• Odour trap with clip and sensor• Spray shield• Fastening material
• For automatic flush actuation of urinals• For private, semi-public and public buildings• For installation in urinal installation set
Characteristics
• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Flush actuation settings can be made and checked, using Geberit
Service Handy• Can be deactivated with Geberit Clean Handy• Dynamic flushing time adjustment• Electrical power supply via power supply unit• Plastic cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Power supply unit• Solenoid valve• Fastening material
Ordering Information
Note
• Only compatible with 115.801.00.5 and 111.665.00.5
• For automatic flush actuation of urinals• For private, semi-public and public buildings• For installation in urinal installation set
Characteristics
• Battery-operated• Automatic flush actuation, user-controlled• Infrared detection with background fade-out• LED display for battery capacity• Warning if the battery is low• Flush actuation settings can be made and checked, using Geberit
Service Handy• Can be deactivated with Geberit Clean Handy• Dynamic flushing time adjustment• Plastic cover plate, with securing bar
Product Details
Scope Of Delivery
• Cover plate with infrared window• Infrared control, premounted on fixation frame• Battery box• 2 lithium batteries• Solenoid valve• Fastening material
Ordering Information
Note
• Only compatible with 115.801.00.5 and 111.665.00.5
Installation set for Geberit urinal flush control, basic
Application Purpose
• For concealed installation in solid or drywall construction• For accommodating the control systems for concealed flushing valves
Characteristics
• Pre-mounted water section• Prepared electrical connection• Protection cover, can be cut to length
Scope Of Delivery
• Mounting box including filter, shut-off and regulating screw, bayonet connection for solenoid or pneumatic valve
• Protection cover• Protective cap• Sleeve• Water connection nipple
Ordering Information
Note
• Only compatible with 115.817.xx.5 and 115.818.xx.5
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery typeLithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,22 l/s
Operating pressure 1 - 8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Detection time factory setting 7 s
Article no. Colour
115.818.11.5 white alpine
115.818.46.5 matt chrome-plated
16
16
25
Article no. Description
115.801.00.5 Installation set for Geberit urinal flush control, basic
14
96
R1/2
14
15
7 1−7
Geberit Taps & Flush systemsUrinal electronic - Basic Flush control
Sanitary Systems Catalogue 2014/2015 145
Installation set for Geberit urinal flush control, with flush pipe and inlet set, basic new
Application Purpose
• For concealed installation in solid constructions• For installation of Geberit urinal flush controls Basic from year of
manufacture 2013
Characteristics
• Water supply connection at the top• Pre-mounted conduit pipe for rinsing the pipe• Stop valve with throttle pre-mounted• Prepared electrical connection• The protection cover protects the servicing opening against moisture
and dirt • Protection cover for service opening, can be cut to length tool-free
Product Details
Scope Of Delivery
• Protection box with cover• Water supply connection R 1/2"• Concealed housing• Stop valve with throttle• Conduit pipe• Terminal• Flush pipe• Connection sleeve• Straight connector
Ordering Information
Note
• Only compatible with 115.817.xx.5 and 115.818.xx.5
Replacement set to Installation set for Geberit urinal flush control, Universal, mains operation
Application Purpose
• For conversion of an existing Geberit urinal system with mains connection and cover plate 16 x 16 cm
• For conversion of existing Geberit urinal systems, article no.: 115.817.xx.1
• For automatic flush actuation of urinals
Characteristics
• Automatic flush actuation• Infrared detection with background fade-out• Ready for operation after mains connection• Power-failure control system closes valve in case of mains failure• Functions can be adjusted and queried with Geberit Service Handy• Can be deactivated with Geberit Clean Handy• Dynamic flushing time adjustment
Product Details
Scope Of Delivery
• Infrared control• Power supply unit with adapter• Solenoid valve• Stop valve with throttle• Seals and holding-down clamps• Fastening material
Ordering Information
Calculated flow rate 0,3 l/s
Flow pressure range 1–8 bar
Flow rate at 1 bar with flow limiter 0,22 l/s
Flow rate at 1 bar without flow limiter 0.3 l/s
Article no. Description
115.985.00.5Installation set for Geberit urinal flush control, with flush pipe and inlet set, basic
Nominal voltage 110 - 240 V AC
Mains frequency 50 - 60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,22 l/s
Operating pressure 1 - 8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Flush time factory setting 4 s
Flush time adjustment range 3 - 15 s
Detection time factory setting 7 s
Detection time adjustment range 3 - 15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1 - 168 h
Calculated flow rate 0,3 l/s
Article no. Description
115.848.00.1Replacement set to Installation set for Geberit urinal flush control, Universal, mains operation
146 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Urinal electronic exposed
Replacement set to Installation set for Geberit urinal flush control, Universal, battery operated
Application Purpose
• For conversion of an existing Geberit urinal system with battery operation and cover plate 16 x 16 cm
• For conversion of existing Geberit urinal systems, article no.: 115.818.xx.x
• For automatic flush actuation of urinals
Characteristics
• Automatic flush actuation• Infrared detection with background fade-out• Battery-operated• LED display for battery capacity• Functions can be adjusted and queried with Geberit Service Handy• Can be deactivated with Geberit Clean Handy• Dynamic flushing time adjustment
Product Details
Scope Of Delivery
• Infrared control• 2 lithium batteries• Solenoid valve• Stop valve with throttle• Seals and holding-down clamps• Fastening material
Ordering Information
Urinal electronic exposed
Geberit flushing valve, electronic, battery operated, surface-mounted, water supply connection on the rear
Application Purpose
• For flushing urinals with water inlet from above• For concealed water supply connection from the rear• For replacing manual surface-mounted urinal flushing valves
115.849.00.1Replacement set to Installation set for Geberit urinal flush control, Universal, battery operated
Urinal electronic exposed
Power consumption 1 W
Operating voltage 9 V DC
Flow pressure range 1 - 10 bar
Flow pressure min. 1 bar
Calculated flow rate 0.22 l/s
Flush time adjustment range 4 - 15 s
Flush time factory setting 7 s
Detection time factory setting 7 s
Storage temperature -20 – +70 °C
Storage temperature -4 – +158 °F
Battery type HR22 (9 V)
Article no. Colour
115.805.46.1 matt chrome-plated
67
119
8
5−15
7
ø 16
105
5
R½
Geberit Taps & Flush systemsAccessories for urinal Flush control
Sanitary Systems Catalogue 2014/2015 147
Geberit flushing valve, electronic, battery operated, surface-mounted, water supply connection at the top
Application Purpose
• For flushing urinals with water inlet from above• For water supply connection from above• For replacing manual surface-mounted urinal flushing valves
• For deactivation of electronic Geberit flushing valves and Geberit flush actuations for sanitary cleaning
Characteristics
• Remote control
Scope Of Delivery
• Concise instructions
Ordering Information
Geberit Service Handy
Application Purpose
• For setting and enquiry of setting values of various electronic Geberit products such as lavatory taps, WC flush controls, urinal flush controls and interval flushes
Characteristics
• 4-line display• Menu guidance• Saving and transfer of settings to other control units of the same type• Compatible with existing control units• Data transmission with infrared light• Battery-operated
Scope Of Delivery
• Pouch• 3 batteries Typ AAA 1.5 V
Ordering Information
Power consumption 1 W
Operating voltage 9 V DC
Flow pressure range 1 - 10 bar
Flow pressure min. 1 bar
Calculated flow rate 0.22 l/s
Flush time adjustment range 4 - 15 s
Flush time factory setting 7 s
Detection time factory setting 7 s
Storage temperature -20 – +70 °C
Storage temperature -4 – +158 °F
Battery type HR22 (9 V)
Article no. Colour
115.806.46.1 matt chrome-plated
8
5-15
7
119
67
Ø 16
105
25
5
Rp1/2"Rp1/2"
Accessories for urinal
Article no. Description
115.831.00.1 Geberit Clean Handy
Article no. Description
115.860.00.1 Geberit Service Handy
148 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush control Accessories for urinal
Geberit connection set for urinal, R 1 x 19, chrom-plated
Ordering Information
Flush pipe transition piece, PE, 32 mm, with protection plug, for Geberit urinal flush control
Product Details
Ordering Information
Geberit inlet connector, d32
Application Purpose
• For connection to urinal
Product Details
Scope Of Delivery
• Seal
Ordering Information
Flush pipe transition piece, PE gunmetal, 32 mm, for Geberit urinal flush control
System overview WC flush control for Geberit push button, radio
Geberit WC flush control, electronic, mains operation, radio
115.897.00.1
Geberit WC flush control, electronic, battery operated, radio
115.898.00.1
Actuation Automatic via Geberit flush release button 241.568.00.1
Control Radio
Power supply 110 - 230 V AC / 4.1 V DC Battery
Suitable for concealed cistern
Sigma 12 cm (UP320)
Accessories
Installation set for Geberit WC flush control, electronic
115.861.00.1
_
Geberit push button for flush actuation, radio
241.568.00.1
Single flush actuator plate or cover plate
External accessories _
Geberit Taps & Flush systemsAutomatic WC control Flush actuators
Sanitary Systems Catalogue 2014/2015 155
Automatic WC control
Geberit actuator plate Sigma80 for dual flush, electronic, touchless
Application Purpose
• For use with Geberit Sigma cistern 12 cm (UP320)• For private and semi-public areas• For dual flush
Characteristics
• Actuator plate made of glass, interlockable• Manual, touchless actuation• Actuator buttons identifiable by light bars• Button illumination can be set in five colours• Self-calibrating electrical lifting device• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Button illumination activated when approached• Infrared user detection• Self-calibrating infrared control• Flush actuation possible via external push-button• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning
Product Details
Scope Of Delivery
• Actuator plate• Fixation frame• Electrical lifting device for flush actuator• Fastening material• Excluded: Power supply unit
Ordering Information
Note
• See also article 115.861.00.1 on page 163• See also system overview on page 149
Geberit actuator plate Sigma80 for dual flush, electronic, touchless
Application Purpose
• For use with Geberit Sigma concealed cistern 8 cm (UP720)• For private and semi-public areas• For dual flush
Characteristics
• Actuator plate made of glass, interlockable• Manual, touchless actuation• Actuator buttons identifiable by light bars• Button illumination can be set in five colours• Self-calibrating electrical lifting device• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Button illumination activated when approached• Infrared user detection• Self-calibrating infrared control• Flush actuation possible via external push-button• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning
Product Details
Scope Of Delivery
• Actuator plate• Fixation frame• Electrical lifting device for flush actuator• Fastening material• Excluded: Power supply unit
Ordering Information
Note
• See also article 115.861.00.1 on page 163• See also system overview on page 149
Automatic WC control
Operating voltage 4.1 V DC
Nominal voltage 110 - 230 V AC
Mains frequency 50 - 60 Hz
Protection degree IP 45
Article no. Colour
116.090.SG.1 black glass
116.090.SM.1 glass reflective
247
164
1
37
Operating voltage 4.1 V DC
Nominal voltage 110 - 230 V AC
Mains frequency 50 - 60 Hz
Protection degree IP 45
Article no. Colour
116.091.SG.1 black glass
116.091.SM.1 glass reflective
247
164
1
37
156 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush actuators Automatic WC control
Geberit actuator plate Sigma10 for dual flush, electronic, touchless, mains operation, can be locked with screws
Application Purpose
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator made of stainless steel• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window, stainless steel• Fixation frame with pre-mounted infrared sensor and control system• Pre-mounted on support block servo motor and lifting device• Protection cover• Actuator rod• Distance bolts• Fastening material• Excluded: Power supply unit
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Triggers full flush• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window• Fixation frame with pre-mounted infrared sensor and control system• Pre-mounted on support block servo motor and lifting device• Protection cover• Actuator rod• Distance bolts• Fastening material• Excluded: Power supply unit
115.907.KN.1 matt chrome / bright chrome / matt chrome
115.907.KM.1 black / bright chrome / black
115.907.KH.1 bright chrome / matt chrome / bright chrome
115.907.KK.1 white / gold-plated / white
115.907.KJ.1 white / bright chrome / white
164
246 14
Geberit Taps & Flush systemsAutomatic WC control Flush actuators
Sanitary Systems Catalogue 2014/2015 157
Geberit actuator plate Sigma10 for dual flush, electronic, touchless, battery operation, can be locked with screw
Application Purpose
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Manual, touchless actuation• Automatic flush actuation can be deactivated• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator made of stainless steel• Can be deactivated with Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window, stainless steel• Plate with pre-mounted infrared sensor, control system and battery
support• Pre-mounted on support block servo motor and lifting device• 2 batteries, each 1.5 V LR20 Alkaline• Protection cover• Actuator rod• Distance bolts• Fastening material
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Can be deactivated with Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window• Plate with pre-mounted infrared sensor, control system and battery
support• Pre-mounted on support block servo motor and lifting device• 2 batteries, each 1.5 V LR20 Alkaline• Protection cover• Actuator rod• Distance bolts• Fastening material
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Manual flush actuation using actuator plate• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator made of stainless steel• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window, stainless steel• Fixation frame with pre-mounted infrared sensor and control system• Pre-mounted on support block servo motor and lifting device• Protection cover• Actuator rod• Distance bolts• Fastening material• Excluded: Power supply unit
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Manual flush actuation using actuator plate• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator made of stainless steel• Flush actuator can be deactivated by Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window, stainless steel• Plate with pre-mounted infrared sensor, control system and battery
support• Pre-mounted on support block servo motor and lifting device• 2 batteries, each 1.5 V LR20 Alkaline• Protection cover• Actuator rod• Distance bolts• Fastening material
• For use with Geberit Sigma concealed cistern 8 cm (UP720)• For the public and semi-public domain• For dual flush• Not suitable for barrier-free and wheelchair-suitable construction
Characteristics
• Infrared user detection• Self-calibrating infrared control• Infrared detection with background fade-out• Operation with servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush actuation• Automatic flush actuation can be deactivated• Manual, touchless actuation• Manual flush actuation using actuator plate• Triggers full flush• Adjustable detection time• Initial flush can be set• Hygienic flush can be set• Flush actuator made of stainless steel• Can be deactivated with Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate with infrared window, stainless steel• Fixation frame with pre-mounted infrared sensor and control system• Pre-mounted on support block servo motor and lifting device• Protection cover• Actuator rod• Distance bolts• Fastening material• Excluded: Power supply unit
• For manual remote flush actuation of Geberit Sigma concealed cistern 12 cm (UP320) from year of manufacture 2002 via external push-buttons
• For use with Geberit Sigma cistern 12 cm (UP320)• Not suitable for use with Geberit Twinline concealed cistern and
UP720, UP200, UP172, UP182
Characteristics
• Flush actuation connected by wire• Geberit covers and stop-and-go actuator plates can be mounted• Dual flush remote control flush actuation using external buttons• Flush actuation using actuator plate• Buttons can be connected in parallel• Self-calibrating electrical lifting device• Operation with extra-low voltage – no mains voltage in the cistern• Plug connection with cross-polarity protection
Product Details
Scope Of Delivery
• Electrical lifting device for flush actuator• Connection cable, 2 m, prefabricated• Electrical control• Excluded: Power supply unit• Excluded: Button• Excluded: Actuator plate
• For manual and remote control flush actuation of concealed cistern UP320 using support hand rail
• Not suitable for use with Geberit Twinline concealed cistern and UP720, UP200, UP172, UP182
Characteristics
• Flush actuation using support hand rail, connected by wire• Flush actuation using actuator plate• Single flush can be triggered• Self-calibrating electrical lifting device• Hygienic flush set• Buttons can be connected in parallel• Operation with extra-low voltage – no mains voltage in the cistern• Power supply unit, external• Plug connection with cross-polarity protection
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate, stainless steel• Electrical lifting device for flush actuator• Fixation frame• 2 wire, length 1.2 m, prefabricated• Actuator rod• Fastening material• Excluded: Power supply unit
• For barrier-free construction• For manual and remote control flush actuation of concealed cistern
UP320 using support hand rail• For manual remote flush actuation of Geberit Sigma concealed cistern
12 cm (UP320) via pull down rails• Not suitable for use with Geberit Twinline concealed cistern and
UP720, UP200, UP172, UP182
Characteristics
• Flush actuation using support hand rail, wireless, radio• Self-calibrating electrical lifting device• Single flush can be triggered• Plug connection with cross-polarity protection• Easy installation and servicing• Flush actuation using actuator plate• Compatible with Geberit Service Handy• Not compatible with Geberit Clean Handy• Hygienic flush set• Operation with extra-low voltage – no mains voltage in the cistern• Power supply unit, external
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate, stainless steel• Electrical lifting device for flush actuator• Control system with radio receiver• Fixation frame• Protection cover• Actuator rod• Actuator lever• Fastening material• Excluded: Power supply unit
• For barrier-free construction• For manual and remote control flush actuation of concealed cistern
UP320 using support hand rail• For manual remote flush actuation of Geberit Sigma concealed cistern
12 cm (UP320) via pull down rails• Not suitable for use with Geberit Twinline concealed cistern and
UP720, UP200, UP172, UP182
Characteristics
• Flush actuation using support hand rail, wireless, radio• Self-calibrating electrical lifting device• Single flush can be triggered• Plug connection with cross-polarity protection• Easy installation and servicing• Flush actuation using actuator plate• Compatible with Geberit Service Handy• Not compatible with Geberit Clean Handy• Hygienic flush set• Battery in closed case inside of the cistern• Battery-operated
Product Details
Scope Of Delivery
• Geberit Sigma10 actuator plate, stainless steel• Electrical lifting device for flush actuator• Control system with radio receiver• Fixation frame• Protection cover• Actuator rod• Actuator lever• Fastening material• 2 batteries, each 1.5 V LR20 Alkaline
Ordering Information
Geberit WC flush control, electronic, battery operated, radio
Application Purpose
• For manual remote flush actuation of Geberit concealed cistern UP320 via Geberit RF-controlled button
• Not suitable for use with Geberit Twinline concealed cistern and UP720, UP200, UP172, UP182
Characteristics
• Flush actuation using Geberit flush release button, wireless• Flush actuation using actuator plate• Single flush with actuator plate• Dual flush with flush release button• Self-calibrating electrical lifting device• Plug connection with cross-polarity protection• Hygienic flush set• Compatible with Geberit Service Handy• Not compatible with Geberit Clean Handy• Easy installation and servicing• Battery-operated• Battery in closed case inside of the cistern
Product Details
Scope Of Delivery
• Electrical lifting device for flush actuator• Protection cover• Fixation frame• Actuator lever• Fastening material• 2 batteries, each 1.5 V LR20 Alkaline• Excluded: Actuator plate• Excluded: Geberit push button for flush actuation, radio
115.898.00.1Geberit WC flush control, electronic, battery operated, radio
162 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsFlush actuators Manual WC control
Geberit WC flush control, electronic, mains operation, radio
Application Purpose
• For manual remote flush actuation of Geberit concealed cistern UP320 via Geberit RF-controlled button
• Not suitable for use with Geberit Twinline concealed cistern and UP720, UP200, UP172, UP182
Characteristics
• Flush actuation using Geberit flush release button, wireless• Flush actuation using actuator plate• Single flush with actuator plate• Dual flush with flush release button• Self-calibrating electrical lifting device• Plug connection with cross-polarity protection• Hygienic flush set• Compatible with Geberit Service Handy• Not compatible with Geberit Clean Handy• Easy installation and servicing• Operation with extra-low voltage – no mains voltage in the cistern• Power supply unit, external
Product Details
Scope Of Delivery
• Electrical lifting device for flush actuator• Protection cover• Fixation frame• Actuator lever• Fastening material• Excluded: Actuator plate• Excluded: Geberit push button for flush actuation, radio• Excluded: Power supply unit
Ordering Information
Geberit push button for flush actuation, radio
Application Purpose
• For manual and remote control flush actuation of Geberit concealed cistern UP320 using support hand rail
Characteristics
• Dual flush with flush release button• Battery-operated• Easy installation and servicing
Product Details
Scope Of Delivery
• 2 batteries typ AAA 1.5 V• Fastening material
Ordering Information
Radio frequency 868.4 MHz
Radio frequency distance 10 m
Mains frequency 50 - 60 Hz
Nominal voltage 110 - 230 V AC
Operating voltage 4.1 V DC
Interval flush factory setting 168 h
Article no. Description
115.897.00.1Geberit WC flush control, electronic, mains operation, radio
Operating voltage 3 V DC
Article no. Description
241.568.00.1 Geberit push button for flush actuation, radio
Geberit installation set for button remote control
Application Purpose
• For installation preparation of a remote control flush actuator connected by wire for Geberit concealed cistern Samba
• For solid and drywall construction• For cable connection of concealed box up to concealed cistern• For Geberit WC flush control, electronic, mains operation, manual,
• For installation preparation of a remote control flush actuator connected by wire for Geberit concealed cistern Samba
• For solid and drywall construction• For cable connection of concealed box up to concealed cistern• For Geberit WC flush control, electronic, mains operation, pull down
Geberit lavatory tap type 87, wall-mountedspout length 165 mm
hot and cold water
116.127.21.1 116.117.21.1
241.631.00.1Geberit
installation set with mains transformer
616.032.00.1Geberit
concealed base unit set
HANSAVAROX, with shut-off
111.493.00.1Geberit Duofix
element for washbasin,
H112 - 130, for concealed wall-
mounted tap
242.645.21.1aerator
1.9 litre/min
242.834.21.1aerator
3.8 litre/min
cold or mixed water
-
116.107.21.1
Geberit lavatory tap type 88, wall-mountedspout length 215 mm
hot and cold water
116.128.21.1 116.118.21.1
cold or mixed water
-
116.108.21.1
Geberit Taps & Flush systemsLavatory tap type 185/186 infrared Taps
Sanitary Systems Catalogue 2014/2015 169
Lavatory tap type 185/186 infrared
Geberit lavatory tap type 185, mains operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• Metal-reinforced hose R 3/8"• Basket filter• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 185, battery operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• Metal-reinforced hose R 3/8"• Basket filter• 6 V battery• Key for aerator• Fastening material
Ordering Information
Lavatory tap type 185/186 infrared
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Article no. Colour
116.135.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Article no. Colour
116.235.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
170 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 185/186 infrared
Geberit lavatory tap type 185, mains operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature adjustment via the mixer lever• Not possible to set just hot water and just cold water• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 185, battery operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature adjustment via the mixer lever• Not possible to set just hot water and just cold water• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• 6 V battery• Key for aerator• Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour
116.155.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour
116.255.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Geberit Taps & Flush systemsLavatory tap type 185/186 infrared Taps
Sanitary Systems Catalogue 2014/2015 171
Geberit lavatory tap type 185, mains operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via the internal mixer• Not possible to set just hot water and just cold water• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 185, battery operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via the internal mixer• Not possible to set just hot water and just cold water• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• 6 V battery• Key for aerator• Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour
116.145.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour
116.245.21.1 bright chrome-plated
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
172 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 185/186 infrared
Geberit lavatory tap type 186, mains operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• Metal-reinforced hose R 3/8"• Basket filter• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 186, battery operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• Metal-reinforced hose R 3/8"• Basket filter• 6 V battery• Key for aerator• Fastening material
Ordering Information
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Article no. Colour
116.136.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Article no. Colour
116.236.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Geberit Taps & Flush systemsLavatory tap type 185/186 infrared Taps
Sanitary Systems Catalogue 2014/2015 173
Geberit lavatory tap type 186, mains operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature adjustment via the mixer lever• Not possible to set just hot water and just cold water• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 186, battery operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature adjustment via the mixer lever• Not possible to set just hot water and just cold water• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• 6 V battery• Key for aerator• Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour
116.156.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour
116.256.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
174 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 185/186 infrared
Geberit lavatory tap type 186, mains operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via the internal mixer• Not possible to set just hot water and just cold water• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• 1.5 m connection cable• Power supply unit• Fastening material
Ordering Information
Geberit lavatory tap type 186, battery operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via the internal mixer• Not possible to set just hot water and just cold water• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply from battery• Battery is sufficient to activate the water flow 200,000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 basket filters• 6 V battery• Key for aerator• Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour
116.146.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 0.5 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour
116.246.21.1 bright chrome-plated
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Geberit Taps & Flush systemsLavatory tap type 87/88 infrared Taps
Sanitary Systems Catalogue 2014/2015 175
Lavatory tap type 87/88 infrared
Geberit lavatory tap type 87, mains operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• Basket filter• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Ordering Information
Geberit lavatory tap type 88, mains operation, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• Basket filter• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Maximum operating temperature water, short-term 90 °C
Max. operating temperature mixed water 45 °C
Activation distance factory setting 20 - 22 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour
116.108.21.1 bright chrome-plated
13
13R1/2
215
19
15
5525°
25°
176 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 87/88 infrared
Geberit lavatory tap type 87, mains operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature pre-setting via the internal mixer• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 basket filters• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Ordering Information
Geberit lavatory tap type 88, mains operation, with mixer, without handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature pre-setting via the internal mixer• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 basket filters• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Maximum operating temperature water, short-term 90 °C
Operating temperature water max. 65 °C
Activation distance factory setting 20 - 22 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour
116.118.21.1 bright chrome-plated
13
13R1/2R1/2
215
19
15
5525°
25°
Geberit Taps & Flush systemsLavatory tap type 87/88 infrared Taps
Sanitary Systems Catalogue 2014/2015 177
Geberit lavatory tap type 87, mains operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature adjustment via the mixer lever• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 basket filters• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Ordering Information
Geberit lavatory tap type 88, mains operation, with mixer and handle
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For concealed installation• For use in the Geberit GIS and Duofix system
Characteristics
• Temperature adjustment via the mixer lever• Proportion of hot water can be limited• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Matches the HansaVarox concealed base unit• Compatible with the MeplaFix water supply connection• Volume flow control with aerator• Various functions can be set manually• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Electrical power supply via power supply unit
Product Details
Scope Of Delivery
• 2 basket filters• Key for aerator• 1.5 m connection cable• Fastening material• Excluded: Power supply unit
Maximum operating temperature water, short-term 90 °C
Operating temperature water max. 65 °C
Activation distance factory setting 20 - 22 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour
116.128.21.1 bright chrome-plated
13
13R1/2R1/2
215
19
15
5525°
25°
178 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 87/88 infrared
Geberit cable for power supply unit for electronics
Ordering Information
Geberit installation set with mains transformer
Application Purpose
• For concealed installation in solid or drywall construction• For power supply of lavatory tap type 85 - 88 and 185 - 186
Characteristics
• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage
Product Details
Scope Of Delivery
• Power supply unit• Concealed box drill size dia. 76 mm• Cover for concealed outlet• Conduit pipe, length 1.7 m
Ordering Information
Geberit concealed base unit set HANSAVAROX with shut-off new
Application Purpose
• For drinking water installations
Characteristics
• Acoustically decoupled
Product Details
Scope Of Delivery
• Rubber collar• Fastening ring
Ordering Information
Article no. Description
242.349.00.1 Geberit cable for power supply unit for electronics
Mains frequency 50 - 60 Hz
Protection degree IP20
Nominal voltage 230 V AC
Output voltage 12 V AC
Article no. Description
241.631.00.1 Geberit installation set with mains transformer
77
77
Product material DR-Messing CC752S
Article no. Rp['']
D[cm]
L[cm]
L1[cm]
l[cm]
l1[cm]
l2[cm]
l3[cm]
Z[cm]
616.032.00.1 1/2 10,4 13,6 13,3 6,8 2 8,3 2,5 5,6
L
RpRp
Z
l
Z
l L1
l1
l2 l3
D
Geberit Taps & Flush systemsLavatory tap type 185/186 generator Taps
Sanitary Systems Catalogue 2014/2015 179
Lavatory tap type 185/186 generator
Geberit lavatory tap type 185, generator, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• With average 20 uses per day with a duration of 4 s each, the tap is
working self-sustainingly
Product Details
Scope Of Delivery
• Generator unit• Adapter for angle stop valve G 3/8• Metal-reinforced hose R 3/8"• Basket filter• Key for aerator• Fastening material
Ordering Information
Geberit lavatory tap type 185, generator, with below-desk mixer
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via below-desk mixer• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• With average 20 uses per day with a duration of 4 s each, the tap is
working self-sustainingly
Product Details
Scope Of Delivery
• Generator unit• Below-desk mixer• Adapter for angle stop valve G 3/8• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• Fastening material
Ordering Information
Lavatory tap type 185/186 generator
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 2 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating temperature water max. 65 °C
Battery type Li-ion (6,6 V)
Operating voltage 6,6 V DC
Article no. Colour
116.335.21.1 bright chrome-plated
6−15
≥ 19
84
77
115
02−38
3/8"
ø 27-38
ø 64
≥ 25
63
16125
25°
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 2 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating temperature water max. 65 °C
Battery type Li-ion (6,6 V)
Operating voltage 6,6 V DC
Article no. Colour
116.365.21.1 bright chrome-plated
12−30
≥ 2484
77
115
02−38
3/8"
ø 27-38
ø 64
63
16125
25°
≥ 25
180 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Lavatory tap type 185/186 generator
Geberit lavatory tap type 186, generator, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature is not adjustable• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• With average 20 uses per day with a duration of 4 s each, the tap is
working self-sustainingly
Product Details
Scope Of Delivery
• Generator unit• Adapter for angle stop valve G 3/8• Metal-reinforced hose R 3/8"• Basket filter• Key for aerator• Fastening material
Ordering Information
Geberit lavatory tap type 186, generator, with below-desk mixer
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature pre-setting via below-desk mixer• Infrared user detection• Automatic triggering• Self-calibrating infrared control• Vandal-resistant• Functions can be adjusted and queried with Geberit Service Handy• Flush actuator can be deactivated by Geberit Clean Handy• Volume flow control with aerator• Water saving mode can be set• Hygienic flush adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• With average 20 uses per day with a duration of 4 s each, the tap is
working self-sustainingly
Product Details
Scope Of Delivery
• Generator unit• Below-desk mixer• Adapter for angle stop valve G 3/8• 2 metal-reinforced hoses R 3/8"• 2 basket filters• Key for aerator• Fastening material
Ordering Information
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 2 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating temperature water max. 65 °C
Battery type Li-ion (6,6 V)
Operating voltage 6,6 V DC
Article no. Colour
116.336.21.1 bright chrome-plated
6−15
≥ 19
84
77
13
02−38
3/8"
ø 27-38
ø 64
63
1225°
95
≥ 25
Differentiated pressure CW/WW ≤ 1.5 bar
Product materialChrome-plated brass
Activation distance factory setting 16 - 18 cm
Activation distance adjustment range 1 - 33 cm
Ambient temperature 1 - 40 °C
Operating pressure 2 - 8 bar
Maximum operating temperature water, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating temperature water max. 65 °C
Battery type Li-ion (6,6 V)
Operating voltage 6,6 V DC
Article no. Colour
116.366.21.1 bright chrome-plated
12−30
≥ 2484
77
3/8"
63
84
13
02−38
ø 27-38
ø 64
12 95
25°
≥ 25
Geberit Taps & Flush systemsLavatory tap type 26 hydraulic Taps
Sanitary Systems Catalogue 2014/2015 181
Converting set generator for lavatory tap
Application Purpose
• For conversion of lavatory taps 185/186 to power supply from generator
• For connection to lavatory taps 185/186 with cold or mixed water operation
Characteristics
• Power supply from generator and rechargeable battery• Power supply, self-sufficient
Scope Of Delivery
• Generator unit• Power adapter, resource-saving• Adapter for angle stop valve G 3/8• Metal-reinforced hose R 3/8"• Basket filter
Ordering Information
Wall mounting set for generator unit
Application Purpose
• For wall mounting of the generator unit
Scope Of Delivery
• Box mounting bracket• Adapter• Metal-reinforced hose R 3/8"• Fastening material
Ordering Information
Lavatory tap type 26 hydraulic
Geberit self-closing tap type 26, without mixer
Application Purpose
• For cold or mixed water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Self-closing• Vandal-resistant• Setting the flow duration irrespective of the water pressure• Volume flow control with aerator• Actuator twist locked
Product Details
Scope Of Delivery
• Metal-reinforced hose R 3/8"• Basket filter• Key for aerator• Fastening material
Ordering Information
Article no. Description
116.450.00.1 Converting set generator for lavatory tab
Article no. Description
116.451.00.1 Wall mounting set for generator unit
Lavatory tap type 26 hydraulic
Product materialChrome-plated brass
Flow rate at 3 bar 6 l/min
Flow duration factory setting 8 s
Flow time range 3 - 30 s
Operating pressure 1 - 10 bar
Ambient temperature 1 - 40 °C
Maximum operating temperature water, short-term 90 °C
Max. operating temperature mixed water 45 °C
Article no. Colour
115.720.21.1 bright chrome-plated
47
12
05-3
SW25
21
5114
38
SW19
G 3/8
182 Sanitary Systems Catalogue 2014/2015
Geberit Taps & Flush systemsTaps Aerator
Geberit self-closing tap type 26, with mixer
Application Purpose
• For cold and hot water connection• For extracting tap water• For the public and semi-public domain• For installation in washbasin or counter top
Characteristics
• Temperature can be manually adjusted• Variable temperature control• Self-closing• Vandal-resistant• Setting the flow duration irrespective of the water pressure• Volume flow control with aerator• Actuator twist locked
Product Details
Scope Of Delivery
• 2 metal-reinforced hoses R 3/8"• 2 non-return valves 3/8"• 2 basket filters• Key for aerator• Fastening material
Ordering Information
Aerator
Tap aerator for Geberit lavatory taps
Ordering Information
Product materialChrome-plated brass
Flow rate at 3 bar 6 l/min
Flow duration factory setting 8 s
Flow time range 3 - 30 s
Operating pressure 1 - 10 bar
Ambient temperature 1 - 40 °C
Maximum operating temperature water, short-term 90 °C
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Article no. Colour
115.721.21.1 bright chrome-plated
47
12
05-3
34
14
34
SW19
RV22
G 3/8
51
Aerator
Article no. Description Colour
242.834.21.1Geberit tap aerator 3.8 litre/min, without key
bright chrome-plated
242.645.21.1Geberit tap aerator 1.9 litre/min, without key
bright chrome-plated
Geberit Taps & Flush systemsUrinal partition
Sanitary Systems Catalogue 2014/2015 183
Urinal partition
Geberit urinal division made from glass, oval
Ordering Information
Geberit urinal division made from glass, rectangular
Ordering Information
Geberit urinal division, plastic
Application Purpose
• For separating urinals in a large-scale installation
Characteristics
• Plastic urinal partition with concealed fastening