Geberit HDPE Drainage Systems 2010 1 Geberit HDPE Page 3 Geberit Silent-db20 Page 111 Tools Page 131 British Board of Agrement Geberit HDPE pipes and fittings have been certified by many European authorities and in 1976 also received BBA certification. The British Board of Agrement, in consultation with the secretary of state, reissued the BBA Certificate 92/2796 in 1992.
144
Embed
Geberit Silent-db20 Tools Page 131 · 6 Geberit HDPE Drainage Systems 2010 Geberit HDPE Reducers HDPE Metric O/D to imperial uPVC OD size adaptor for imperial size traps 32 mm to
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Geberit HDPE Drainage Systems 2010 1
Geberit HDPE Page 3
Geberit Silent-db20 Page 111
Tools Page 131
British Board of AgrementGeberit HDPE pipes and fittings have been certified by many European authorities and in 1976 also received BBA certification. The British Board of Agrement, in consultation with the secretary of state, reissued the BBA Certificate 92/2796 in 1992.
• Non-rotating inlet, blocked• Suitable for garages since weight-bearing up to 1.5 t (with suitable grating)• Height-adjustable with extension set or extension piece• Self-cleaning form with good flow properties• Easy entry to outlet (trap insert removable by hand)• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof• To be buttwelded
Product Details
Ordering Information
Floor drains
Trap height 70 mm
Article no. dØmm
d1Ømm
hcm
Lcm
Colour PU1
364.630.16.1 63 56 12,5 19 Black 1
hd
L 125
125
15-12
1813
d1
Geberit HDPEFloor drains
Geberit HDPE Drainage Systems 2010 55
HDPE floor drain, ø 75 mm Varino
Application
• For use within buildings
Characteristics
• Non-rotating inlet, blocked• Suitable for garages since weight-bearing up to 1.5 t (with suitable grating)• Height-adjustable with extension set or extension piece• Self-cleaning form with good flow properties• Easy entry to outlet (trap insert removable by hand)• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof• Inlet ø 56 mm• Outlet ø 75 mm• To be buttwelded
Product Details
Additional Note
• Base unit PE• Protective cap• Section seal EPDM • Trap insert• Stainless steel grating
Ordering Information
Trap height 70 mm
Rear connection max. 1 l/s
Drainage capacity 1.05 l/s
Article no. dØmm
d1Ømm
hcm
Lcm
Colour PU1 PU4
365.630.16.1 75 56 13 19 Black 1 28
hd
L 125
125
15-12
1813
d1 165
15
56 Geberit HDPE Drainage Systems 2010
Geberit HDPEFloor drains
HDPE floor drain, ø 110 mm Varino
Application
• For use within buildings
Characteristics
• Non-rotating inlet, blocked• Suitable for garages since weight-bearing up to 1.5 t (with suitable grating)• Height-adjustable with extension set or extension piece• Self-cleaning form with good flow properties• Easy entry to outlet (trap insert removable by hand)• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof• Outlet ø 110 mm• Inlet ø 56 mm• Drainage capacity depending on damming height• To be buttwelded
Product Details
Additional Note
• Base unit PE• Protective cap• Section seal EPDM • Trap insert• Stainless steel grating• Outlet reducer ø 110/75
Ordering Information
Trap height 70 mm
Rear connection max. 1 l/s
Drainage capacity 1.75 - 2.75 l/s
Article no. dØmm
d1Ømm
hcm
Lcm
Colour PU1 PU4
367.630.16.1 110 56 11 25 Black 1 28
L
18 13d1
hd
125
125
15-12
165
15
Geberit HDPEFloor drains
Geberit HDPE Drainage Systems 2010 57
HDPE floor drain with PP inlet funnel and stainless steel grating, height adjustable
Characteristics
• Mounting of vapour barrier possible• Inlet funnel height-adjustable (0 - 40 mm)• Vertical outlet ø 50 mm (connection with electroweld sleeve coupling, ring seal socket or butt welding)• Three mounting brackets to fasten fixing irons• Inlet funnel can be installed up to 7.5% ( - 4.2°) offset with relation to the base unit• Trap insert can be removed without tools• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof
Product Details
Additional Note
• Adjustable PP inlet funnel• Stainless steel grating• Trap insert with greased round cord ring• Protection plug• Base unit PE
Ordering Information
Drainage capacity 1.1 l/s
Trap height 50 mm
Article no. PU1 PU2 PU4
361.620.00.1 1 6 72
10
92
8555
10-14
5
11
50
58 Geberit HDPE Drainage Systems 2010
Geberit HDPEFloor drains
HDPE floor drain with PVC inlet funnel and stainless steel grating, height adjustable
Characteristics
• Mounting of vapour barrier possible• Inlet funnel height-adjustable (0 - 40 mm)• Vertical outlet ø 50 mm (connection with electroweld sleeve coupling, ring seal socket or butt welding)• Three mounting brackets to fasten fixing irons• Inlet funnel can be installed up to 7.5% ( - 4.2°) offset with relation to the base unit• Trap insert can be removed without tools• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof
Product Details
Additional Note
• Adjustable PVC inlet funnel• Stainless steel grating• Trap insert with greased round cord ring• Protection plug• Base unit PE
Ordering Information
Drainage capacity 1.1 l/s
Trap height 50 mm
Article no. PU1 PU4
361.621.00.1 1 72
15
10
92
8555
10-14
5
11
50
Geberit HDPEFloor drains
Geberit HDPE Drainage Systems 2010 59
HDPE floor drain with PP inlet funnel and stainless steel grating, height adjustable
Application
• For use as balcony inlet (version with roof)
Characteristics
• Height-adjustable 2 - 7 cm• Outlet ø 63 mm (with electroweld sleeve coupling/ring seal socket or butt welding)• Low construction height and simple installation• Self-cleaning form with good flow properties• Shockproof• Resistant to hot water• Resistant to chemicals• Freeze-proof• Not trapped• To be buttwelded
Product Details
Additional Note
• Stainless steel grating• PP inlet funnel• Rubber seal EPDM• Base unit PE
Ordering Information
Drainage capacity 1 l/s
Article no. dØmm
PU1 PU2 PU4
364.637.00.1 63 1 10 120
2-7
d
7
112
10
60 Geberit HDPE Drainage Systems 2010
Geberit HDPEFloor drains
Grating for Varino floor drain chrome steel C/W fixing screw
Application
• For Varino floor drain
Characteristics
• Not weight-bearing• With screw connection
Product Details
Additional Note
• Fastening material
Ordering Information
Grating for floor drain, for max. weight 1.5 tons
Application
• For Varino floor drain
Characteristics
• Without screw connection• Weight-bearing up to 1.5 t
Product Details
Ordering Information
Product material Stainless steel
Article no. PU1 PU4
388.134.00.1 1 20
Product material Stainless Cr-Ni-Mo steel BS 317 S16
Article no. PU1
388.133.00.1 1
135
135
Geberit HDPEFloor drains
Geberit HDPE Drainage Systems 2010 61
Extension set for height adjustment
Application
• For Varino floor drain
Product Details
Additional Note
• Seal
Ordering Information
Extension piece (13 cm) for flange
Application
• For Varino floor drain
Product Details
Ordering Information
PVC Penetration membrane
Application
• For covering pipe openings in walls, ceilings and floors• For protection against moisture• Area of application up to 1 m water level• For Geberit HDPE and Geberit Silent-db20• For bonding and welded connections• For welding with PVC sheet
Characteristics
• Sarnafil contact foil, PVC• Seal, EPDM
Ordering Information
Product material PE
Article no. Colour PU1 PU2 PU4
388.136.16.1 Black 1 10 80
Product material PE
Article no. PU1 PU2 PU3 PU4
388.135.00.1 1 5 25 100
Article no. dØmm
Dcm
Hcm
Lcm
PU1 PU4
367.674.00.1 110 19,5 2,5 48 1 180
25-24
25-14
H
d
D
L
62 Geberit HDPE Drainage Systems 2010
Geberit HDPEFloor drains
Sarnafil penetration membrane
Application
• For covering pipe openings in walls, ceilings and floors• For protection against moisture• Area of application up to 1 m water level• For Geberit HDPE and Geberit Silent-db20• For bonded connections• For connecting with bitumen roof foils• For hot bitumen and sealing paint• "Resistit" for connection with bitumen
Characteristics
• Resistit contact foil, EPDM• Seal, EPDM
Ordering Information
Inlet funnel PP, adjustable
Ordering Information
Article no. dØmm
Dcm
Hcm
Lcm
PU1 PU4
361.673.00.1 NEW 50 13,5 2,5 50 1
363.673.00.1 NEW 56 13,5 2,5 50 1 400
365.673.00.1 NEW 75 19,5 2,5 50 1 240
367.673.00.1 110 19,5 2,5 50 1 240
368.673.00.1 NEW 125 21 2,5 50 1
Article no. Colour PU1 PU2 PU3 PU4
854.694.06.1 Granite grey 1 10 50 400
H
d
D
L
93
7x1
10
9
10
93
10
Geberit HDPETraps
Geberit HDPE Drainage Systems 2010 63
Inlet funnel PVC, adjustable
Ordering Information
Stainless steel square flat grating
Characteristics
• Not weight-bearing
Ordering Information
Traps
PP Bottle trap 1 1/2" x 40 mm
Ordering Information
Article no. Colour PU1
854.693.94.1 Iron grey 1
Article no. PU1
854.752.00.1 1
Traps
Article no. dØmm
Rgmm/in
Acm
Hcm
PU1 PU3 PU4
152.012.16.1 40 1 1/4 8 20,5 1 40 400
10
97x1
10
17
93 10 1793
93
A
H
Rg
d
64 Geberit HDPE Drainage Systems 2010
Geberit HDPETraps
Washbasin trap chrome with 1 1/4" BSP waste connection and 32 mm outlet
Application
• For washbasin• Use with Ring Seal Socket 379.768.16.1
Characteristics
• Water seal with partition wall• Corrosion-resistant• Plug connection on the outlet pipe
Product Details
Ordering Information
Bath trap, overflow and chrome pop-up waste standard
Characteristics
• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed
Bath trap, overflow and filler, chrome pop-up waste standard
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle
Additional Note
• Trap• Cable actuator• Overflow• Water inlet• Water supply connection bracket• Outlet bend• Adaptor• Fastening material• Outlet cover
Ordering Information
Article no. Colour PU1 PU2
150.712.21.1 Gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
Geberit HDPETraps
Geberit HDPE Drainage Systems 2010 67
Bath trap, overflow and filler, chrome pop-up waste large
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle
Additional Note
• Trap• Cable actuator• Overflow• Water inlet• T-piece• Water supply connection bracket• Outlet bend• Adaptor• Fastening material• Outlet cover
Ordering Information
Article no. Colour PU1 PU2
150.713.21.1 Gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
68 Geberit HDPE Drainage Systems 2010
Geberit HDPETraps
PushControl bath trap, overflow and chrome pop-up waste, standard
Application
• For bathtubs with valve hole ø 52 mm• For bathtubs in standard size
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Connection to the drainage pipe with PE outlet pipe ø 40 / 43 mm, can be pushfit or HDPE welded• Drain valve made from stainless steel
PushControl bath trap, overflow and chrome pop-up waste, long
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special lengths
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Connection to the drainage pipe with PE outlet pipe ø 40 / 43 mm, can be pushfit or HDPE welded• Drain valve made from stainless steel
PushControl bath trap, overflow and chrome pop-up waste, high
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special heights
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Connection to the drainage pipe with PE outlet pipe ø 40 / 43 mm, can be pushfit or HDPE welded• Drain valve made from stainless steel
• For earthenware sinks• Use with waste adaptor 152.162.16.1
Characteristics
• Flat edge
Product Details
Additional Note
• Counter nut• Seal
Ordering Information
Cone for overflow pipe, in PP for waste fitting
Application
• For outlet valve Rg 60 x 1/8"
Product Details
Additional Note
• O-ring EPDM
Ordering Information
Product material PP
Article no. Rgmm/in
Dcm
Hcm
Colour PU1 PU4
352.329.08.1 60 x 1/8 8,8 8 Grey RAL 7032 1 100
Product material PP
Article no. dØmm
d1Ømm
Hcm
Colour PU1 PU2
352.333.08.1 50 46 4,5 Grey RAL 7032 1 10
D
H
Rg
d1
d
H
76 Geberit HDPE Drainage Systems 2010
Geberit HDPETraps
Plug without chain
Application
• For outlet valve Rg 60 x 1/8"
Product Details
Ordering Information
Grating with 5 holes
Application
• For drain with round thread
Characteristics
• With 5 holes ø 12 mm
Product Details
Ordering Information
Product material PP
Article no. Colour PU1 PU2
352.331.08.1 Grey RAL 7032 1 10
Product material PP
Article no. Colour PU1 PU2
352.332.08.1 Grey RAL 7032 1 10
252
46
18
45
Geberit HDPEAccessories for laboratories
Geberit HDPE Drainage Systems 2010 77
Accessories for laboratories
Dilution trap, PP black, with adaptor
Application
• For mixing liquids• For chemical and laboratory drains• For combination with 0.6 l glass container or 2.3 l glass container• For connection to sinks
Characteristics
• Anti-siphonic• Content can be visually checked• 0.6 l and 2.3 l glass containers with uniform connection method• Glass containers can be removed for easy cleaning
Additional Note
• Reduction ring G 1 1/2" x 1 1/4"• Union nut ø 50 mm• Valve union nut 1 1/4"• Slip rings• Seals• Fastening material• Excluded: Glass container
• For ventilating drainage pipes• For gravity drainage units• Not allowed to be used as a replacement for ventilation pipes in siphon and pump pressure pipes because no ventilation through the valve is
possible
Characteristics
• Male thread 1 1/2"
Additional Note
• Connection sleeve• Thermal insulation cap
Ordering Information
Article no. G''
Colour PU1 PU2 PU3 PU4
242.692.11.1 1 1/2 x 1 1/4 White alpine 1 10 100 5600
• For ventilating drainage pipes• For gravity drainage units• Not allowed to be used as a replacement for ventilation pipes in siphon and pump pressure pipes because no ventilation through the valve is
possible
Characteristics
• Male thread 1 1/2"
Additional Note
• Connection sleeve• Thermal insulation cap
Ordering Information
Air admittance valve 75 mm
Application
• For ventilating drainage pipes• For gravity drainage units• Not allowed to be used as a replacement for ventilation pipes in siphon and pump pressure pipes because no ventilation through the valve is
possible
Additional Note
• Connection sleeve• Thermal insulation cap
Ordering Information
Article no. dØmm
d1Ømm
G''
Bcm
Hcm
hcm
Lcm
PU1 PU2 PU3 PU4
305.900.00.1 50 57 1 1/2 7 7,3 3,5 8 1 10 50 750
Article no. dØmm
d1Ømm
diØmm
Bcm
Hcm
hcm
Lcm
PU1 PU2 PU4
307.900.00.1 90 106 75 13,6 12,5 5,8 15,5 1 4 144
L
d / G
d1
H
B
h
L
di
d
d1
H
B
h
d
82 Geberit HDPE Drainage Systems 2010
Geberit HDPEAir admittance valves
Air admittance valve 110 mm
Application
• For ventilating drainage pipes• For gravity drainage units• Not allowed to be used as a replacement for ventilation pipes in siphon and pump pressure pipes because no ventilation through the valve is
possible
Additional Note
• Connection sleeve• Thermal insulation cap
Ordering Information
Air admittance valve 110 mm (Silent-db20)
Application
• For ventilating drainage pipes• For gravity drainage units• Not allowed to be used as a replacement for ventilation pipes in siphon and pump pressure pipes because no ventilation through the valve is
• For all drainage pipes• For plugging into ceramic sleeves• For connecting pipe ends with ceramic clips• For seals and clamping connectors for ceramic materials
Characteristics
• UV-resistant• To be buttwelded
Product Details
Additional Note
• Seal EPDM
Ordering Information
Product material PE-HD
Article no. dØmm
d1Ømm
Hcm
hcm
Colour PU1
367.739.16.1 110 132 15,2 7 Black 1
368.739.16.1 125 159 15,5 7 Black 1
369.739.16.1 160 186 15,5 7 Black 1
370.739.16.1 200 242 20 13 Black 1
371.739.16.1 250 298 20 13 Black 1
372.739.16.1 315 352 20 12 Black 1
d1
d
Hh
92 Geberit HDPE Drainage Systems 2010
Geberit HDPEFire protection sleeves
Fire protection sleeves
Fire protection sleeve RS90 Plus New
Application
• For protection against fire spread• For pipe openings in walls or ceilings• For drainage pipes with pipe dimensions ø 40 - ø 200 mm• For later installation on the ceiling, solid or dry wall• For direct installation in ceiling, solid or dry wall for new installations• Not suitable for passing other parts or aids through
Characteristics
• Certified to EN 13666-3• Fire resistance S 90, R 90, EI 90• Sound-absorbing
• For attaching pipes to ceilings and vertically to walls• For slide fastening of pipes• For anchor-point fastening of pipes in combination with electrowelding tapes• For fastening with threaded rod
Characteristics
• Galvanised• Female thread• Adjustable• Operated with one hand• Pipe bracket width 3 cm
Product Details
Ordering Information
Bracketry
Product material Steel
Article no. d1Ømm
G''
d2Ømm
L1cm
L2cm
PU1 PU2 PU3 PU4
360.841.00.2 40 1/2 48 3,5 3,9 1 10 50 3200
361.841.00.2 50 1/2 58 4 4,4 1 10 50 2250
363.841.00.2 56 1/2 64 4,3 4,7 1 10 50 2250
364.841.00.2 63 1/2 71 4,7 5,1 1 10 50 2250
365.841.00.2 75 1/2 83 5,3 5,7 1 10 50 1800
366.841.00.2 90 1/2 98 6 6,4 1 10 50 1200
367.841.00.2 110 1/2 118 7 7,4 1 10 50 1200
368.841.00.2 125 1/2 133 7,8 8,2 1 5 25 700
369.841.00.2 160 1/2 168 9,5 9,9 1 5 25 600
G
d1d2
L1/L2
94 Geberit HDPE Drainage Systems 2010
Geberit HDPEBracketry
Adjustable pipe bracket, with threaded nut M10
Application
• For attaching pipes to ceilings and vertically to walls• For slide fastening of pipes• For fastening with threaded rods
Characteristics
• Galvanised• Female thread• Adjustable• Operated with one hand• Pipe bracket width 3 cm
Product Details
Ordering Information
Bracket, with threaded nut 1"
Application
• For attaching pipes to ceilings and vertically to walls• For slide fastening of pipes in conjunction with plastic strips• For anchor-point fastening of pipes in conjunction with electrofusion sleeve couplings or double flange bushings• For fastening with threaded rod
Characteristics
• Galvanised• Female thread• Pipe bracket width 4 cm
Product Details
Ordering Information
Product material Steel
Article no. d1Ømm
Mmm
d2Ømm
L1cm
L2cm
PU1 PU2 PU3 PU4
360.843.00.2 40 10 48 3,5 3,9 10 50 1400
361.843.00.2 50 10 58 4 4,4 1 10 50 1200
363.843.00.2 56 10 64 4,3 4,7 1 10 50 1400
364.843.00.2 63 10 71 4,7 5,1 1 10 50 1400
365.843.00.2 75 10 83 5,3 5,7 1 10 50 700
366.843.00.2 90 10 98 6 6,4 1 10 50 800
367.843.00.2 110 10 118 7 7,4 1 10 50 800
368.843.00.2 125 10 133 7,8 8,2 1 5 25 800
369.843.00.2 160 10 168 9,5 9,9 1 5 25 300
Product material Steel
Article no. dØmm
G''
Lcm
PU1 PU2 PU4
370.840.00.1 200 1 14,8 1 13 208
371.840.00.1 250 1 17,3 1 10 160
372.840.00.1 315 1 20,5 1 7 84
L1/L2
M
d1d2
G
L
d
Geberit HDPEBracketry
Geberit HDPE Drainage Systems 2010 95
Threaded fixing pin
Application
• For fastening pipe brackets with M10 coupling in wooden constructions
Characteristics
• Male thread
Ordering Information
Mounting plate with threaded nut 1/2"
Application
• For attaching pipes to ceilings and vertically to walls• For attaching pipe brackets to the building structure• For anchor point and slide fastening
Characteristics
• Female thread• Galvanised• 2 fastening points
Product Details
Ordering Information
Mounting plate round with nut M10
Application
• For attaching pipes to ceilings and vertically to walls• For attaching pipe brackets to the building structure• For attaching support rails to the building structure• For slide fastening
• For attaching pipes to ceilings and vertically to walls• For attaching pipe brackets to the building structure• For slide fastening• For attaching support rails to the building structure
Characteristics
• Female thread• Galvanised• 2 fastening points
Product Details
Ordering Information
Threaded rod M10
Application
• For attaching pipe brackets to the mounting plate• For fastening of support rails on mounting plate
• For attaching pipes to ceilings and vertically to walls• For fastening of pipe brackets with clamp fastening• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• Square profile
Product Details
Ordering Information
PluviaFix suspension element for steel square section rail
Application
• For attaching pipes to ceilings and vertically to walls• For fastening steel square section rail• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• Female thread• With long thread coupling welded on
Product Details
Additional Note
• Excluded: Tension wedge
Ordering Information
Pluvia brackets
Product material Steel
Article no. Lm
Colour PU2 PU4
362.863.26.1 5 Galvanised / blue passivated 5 500
Product material Steel
Article no. Colour PU1 PU2 PU3 PU4
362.862.26.1 Galvanised / blue passivated 1 10 100 2100
L(m)
3
3
M10
3 3
M10
47
Geberit HDPEPluvia brackets
Geberit HDPE Drainage Systems 2010 99
PluviaFix connection element for steel square section rail
Application
• For attaching pipes to ceilings and vertically to walls• For connecting steel square section rails• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• With long thread coupling welded on
Product Details
Additional Note
• Excluded: Tension wedges
Ordering Information
PluviaFix tension wedge for square profile
Application
• For attaching pipes to ceilings and vertically to walls• For fastening pipe brackets, suspension and connection elements on support rail• For fastening to the PluviaFix support rail square profile• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised
Product Details
Ordering Information
Product material Steel
Article no. Colour PU1 PU2 PU4
362.864.26.1 Galvanised / blue passivated 1 10 1100
Product material Steel
Article no. Lcm
Colour PU1 PU2 PU4
362.865.26.1 9 Galvanised / blue passivated 1 100 21000
20
M10
3
M10
47
L
100 Geberit HDPE Drainage Systems 2010
Geberit HDPEPluvia brackets
PluviaFix pipe bracket for guide and anchor point
Application
• For use in rigid fixed soil and waste systems• For fastening with tension wedge• For fastening to the PluviaFix support rail square profile• For slide fastening of pipes• For attaching pipes to ceilings and vertically to walls• For anchor-point fastening of pipes in combination with electroweld sleeve couplings• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised
Product Details
Additional Note
• Excluded: Tension wedge
Ordering Information
Product material Steel
Article no. dØmm
Lcm
PU1 PU2 PU4
360.861.00.1 40 11 1 10 1400
d
L
Geberit HDPEPluvia brackets
Geberit HDPE Drainage Systems 2010 101
PluviaFix pipe bracket for guide and anchor point
Application
• For fastening with tension wedge• For fastening to the PluviaFix support rail square profile• For slide fastening of pipes• For attaching pipes to ceilings and vertically to walls• For anchor-point fastening of pipes in combination with electrowelding tapes• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised
Product Details
Additional Note
• Excluded: Tension wedge
Ordering Information
Product material Steel
Article no. d1Ømm
d2Ømm
L1cm
L2cm
PU1 PU2 PU4
361.861.00.1 50 58 10,9 11,3 1 10 1000
363.861.00.1 56 64 11,2 11,6 1 10 1000
364.861.00.1 63 71 11,8 12,2 1 10 1400
365.861.00.1 75 83 12,4 12,8 1 10 640
366.861.00.1 90 98 13,3 13,7 1 10 640
367.861.00.1 110 118 14,4 14,8 1 10 640
368.861.00.1 125 133 15,1 15,5 1 10 400
369.861.00.1 160 168 17 17,4 1 10 400
d1
L1/L2
d2
102 Geberit HDPE Drainage Systems 2010
Geberit HDPEPluvia brackets
PluviaFix pipe bracket for guide and anchor point
Application
• For fastening with tension wedge• For fastening to the PluviaFix support rail square profile• For slide fastening of pipes• For attaching pipes to ceilings and vertically to walls• For anchor-point fastening of pipes in combination with electrowelding tapes• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• With securing clip
Product Details
Additional Note
• Securing clip• Excluded: Tension wedge
Ordering Information
Plastic insert strip for pipe bracket
Application
• For slide fastening of pipes in conjunction with pipe brackets
• For additional support of the PluviaFix fastening system under unfavourable conditions• For horizontal pipe fastening• For installation during pipe installation• For subsequent installation• For ø 75 mm pipes that are suspended more than 100 cm• For ø 90 - 160 mm pipes that are suspended more than 60 cm• For fastening to the PluviaFix support rail square profile• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• Articulated connection can be rotated through 180°
Product Details
Ordering Information
Product material Steel
Article no. dØmm
Mmm
Lcm
PU1 PU2 PU4
365.710.00.1 75 10 12,4 1 10 200
366.710.00.1 90 10 13,3 1 10 280
367.710.00.1 110 10 14,4 1 10 180
368.710.00.1 125 10 15,1 1 10 280
369.710.00.1 160 10 17 1 5 120
d
L
M
M M
104 Geberit HDPE Drainage Systems 2010
Geberit HDPEPluvia brackets
PluviaFix support set ø 200 mm
Application
• For additional support of the PluviaFix fastening system under unfavourable conditions• For horizontal pipe fastening• For installation during pipe installation• For subsequent installation• For pipes suspended more than 60 cm• For fastening to the PluviaFix support rail square profile• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• Articulated connection can be rotated through 180°• With securing clip
Product Details
Additional Note
• Securing clip
Ordering Information
PluviaFix C profile support rail
Application
• For attaching pipes to ceilings and vertically to walls• For fastening pipe brackets with thread fastening M16• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• C profile
Ordering Information
Product material Steel
Article no. dØmm
Mmm
Lcm
PU1 PU2 PU4
370.710.00.1 200 10 19 1 5 100
Article no. Bcm
Hcm
L (m)m
PU2 PU4
363.863.00.1 4 6 5 5 200
d
L
M
M M
B
H L(m)
Geberit HDPEPluvia brackets
Geberit HDPE Drainage Systems 2010 105
PluviaFix connection element for C profile
Application
• For attaching pipes to ceilings and vertically to walls• For connecting C profile support rails• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised
Additional Note
• Fastening material
Ordering Information
PluviaFix suspension element for C profile
Application
• For attaching pipes to ceilings and vertically to walls• For fastening C profile support rails with threaded rods M10• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised
Additional Note
• Fastening material
Ordering Information
Article no. Bcm
Hcm
Lcm
PU1 PU2
363.864.00.1 4,5 4 16 1 5
Article no. PU1 PU2
363.862.00.1 1 50
B
H L
106 Geberit HDPE Drainage Systems 2010
Geberit HDPEPluvia brackets
PluviaFix pipe bracket for 250 - 315 mm pipe used with PluviaFix C profile support rail
Application
• For attaching pipes to ceilings and vertically to walls• For fastening to the PluviaFix support rail C-profile• For slide fastening of pipes• For fastening with threaded rods
Characteristics
• Female thread• Galvanised
Product Details
Additional Note
• Fastening material
Ordering Information
Product material Steel
Article no. dØmm
Mmm
Bcm
Lcm
lcm
PU1 PU2 PU4
371.862.00.1 250 16 3 14,8 6 1 10
372.862.00.1 315 16 3 18 6 1 5 120
M
L
l
d
B
Geberit HDPEPluvia brackets
Geberit HDPE Drainage Systems 2010 107
PluviaFix pipe anchor bracket set with sleeve M16 with fixed-point welding strip for C profile support rail, set with 2 pieces 250 mm
Application
• For attaching pipes to ceilings and vertically to walls• For fastening to the PluviaFix support rail C-profile• For fixed-point fastening of pipes• For fastening with threaded rods
Characteristics
• Female thread• Galvanised
Product Details
Additional Note
• Pipe bracket• Fixed-point welding strip• Fastening material
Ordering Information
Product material Steel
Article no. dØmm
Mmm
Bcm
Lcm
lcm
PU1 PU2 PU4
371.861.00.1 250 16 3 14,8 6 1 5 120
M
L
l
d
B
108 Geberit HDPE Drainage Systems 2010
Geberit HDPEPluvia brackets
PluviaFix pipe anchor bracket set with sleeve M16 with fixed-point welding strip for C profile support rail, set with 2 pieces 315 mm
Application
• For attaching pipes to ceilings and vertically to walls• For fastening to the PluviaFix support rail C-profile• For fixed-point fastening of pipes• For fastening with threaded rods
Characteristics
• Female thread• Galvanised
Product Details
Additional Note
• 2 pipe brackets• 4 electrofusion tapes for anchor bracket• Fastening material
Ordering Information
Product material Steel
Article no. dØmm
Mmm
Bcm
Lcm
lcm
PU1 PU4
372.861.00.1 315 16 3 18 6 1 24
M
L
l
d
B
Geberit HDPEPluvia brackets
Geberit HDPE Drainage Systems 2010 109
PluviaFix support set ø 250 - 315 mm
Application
• For additional support of the PluviaFix fastening system under unfavourable conditions• For horizontal pipe fastening• For installation during pipe installation• For subsequent installation• For pipes suspended more than 60 cm• For fastening to the PluviaFix support rail C-profile• Use near the sea is not permitted as the material corrodes in ambient air containing chlorine
Characteristics
• Galvanised• Articulated connection can be rotated through 180°
• For domestic drainage systems• For buildings with higher than average requirements concerning acoustic insulation• For horizontal and vertical installation• For compensating material expansion• For temperature differences from -10 to +60 °C• For combination with tension resistant connection of pipes• Is not allowed to be used in combination with Silent-db20 clamping connector
Characteristics
• Sound-absorbing• UV-resistant• Abrasion-resistant• One size larger acoustic brackets must be used to anchor this fitting
• For domestic drainage systems• For compensating material expansion• For connecting pipes and fittings• For Geberit HDPE and Geberit Silent-db20• For combination with electrofusion sleeve coupling and clamping connector
Characteristics
• With expansion compensation and extraction lock• One size larger acoustic brackets must be used to anchor this fitting
Product Details
Additional Note
• Lip seal EPDM• Stainless steel claw
Ordering Information
Silent-db20 clamping connector with 1 screw
Application
• For domestic drainage systems• For connecting pipes and fittings• For Geberit Silent-db20• For combination with support and expansion sleeve
Product material Stainless Cr-Ni steel BS 304 S 31
Article no. dØmm
Dcm
Ecm
Hcm
Colour PU1 PU2 PU3 PU4
305.003.14.2 56 7,2 2,3 5 Black 1 10 50 1050
307.003.14.2 75 9,1 2,3 5 Black 1 10 50 1050
308.003.14.2 90 10,6 2,3 5 Black 1 10 50 700
310.003.14.2 110 12,6 2,3 5 Black 1 10 50 700
315.003.14.2 160 17,3 3,3 7 Black 1 4 20
d
X
D1
D
HE
E1
d
D
HEE
124 Geberit HDPE Drainage Systems 2010
Geberit Silent-db20Acoustic brackets
Acoustic brackets
Universal pipe brackets, with acoustical insulation, with threaded nut 1/2"
Application
• For attaching pipes to ceilings and vertically to walls• For fixed point or sliding installation of pipes
Characteristics
• Sound-absorbing• Galvanised• Female thread• Male thread• Pipe bracket width 3 cm
Product Details
Ordering Information
Acoustic pipe bracket
Application
• For attaching pipes to ceilings and vertically to walls
Characteristics
• Sound-absorbing• Galvanised• Female thread• Pipe bracket width 4.6 cm
Product Details
Ordering Information
Acoustic brackets
Product material Steel
Article no. dØmm
G''
Mmm
Lcm
PU1 PU2 PU3 PU4
305.812.26.1 56 1/2 10 4,7 1 10 50 1600
306.812.26.1 63 1/2 10 5 10 50
307.812.26.1 75 1/2 10 5,7 1 10 50 1000
308.812.26.1 90 1/2 10 6,4 1 10 50 800
310.812.26.1 110 1/2 10 7,4 1 10 50 600
312.812.26.1 NEW 125 1/2 10 8,1 1 10 50 500
315.812.26.1 160 1/2 10 9,9 1 5 25 400
Product material Steel
Article no. dØmm
G''
Lcm
PU1 PU2
315.813.26.1 178 1 12 1 10
G/M
L
d
L
d
G
Geberit Silent-db20Acoustic brackets
Geberit HDPE Drainage Systems 2010 125
Mounting plate angular 2-hole, with socket and nipple New
Application
• For attaching pipe brackets to the building structure• For attaching pipes to ceilings and vertically to walls• For anchor point and slide fastening• For attaching support rails to the building structure
Characteristics
• Galvanised• Female thread• Male thread• 2 fastening points
Product Details
Ordering Information
Product material Steel
Article no. G''
Mmm
acm
Bcm
Hcm
hcm
Lcm
Colour PU1 PU3
362.851.26.1 NEW 1/2 10 8,3 4 1,4 0,5 12 Galvanised / blue passivated 1 50
Hh
M/G
a
L
B
126 Geberit HDPE Drainage Systems 2010
Geberit Silent-db20WC Connector
WC Connector
Silent-db20 WC outlet bend 90° with coupling and ring seal socket, short
Application
• For domestic drainage systems• For buildings with higher than average requirements concerning acoustic insulation• For appliances with horizontal outlet• For Duofix WC frames
Silent-db20 WC outlet bend 90° with coupling and ring seal socket, long
Application
• For domestic drainage systems• For buildings with higher than average requirements concerning acoustic insulation• For appliances with horizontal outlet• For Duofix WC frames
• For airborne sound insulation and solid-borne noise insulation
Characteristics
• Lead-free• PVC-free• Surface suitable for adhesive tape
Additional Note
• Supplied in mats; lying flat
Ordering Information
ISOL sound insulation mat lead-free B2 self-adhesive
Application
• For airborne sound insulation and solid-borne noise insulation
Characteristics
• Lead-free• PVC-free• Surface suitable for adhesive tape• Self-adhesive
Additional Note
• Supplied in mats; lying flat
Ordering Information
ISOL sound insulation
Article no. smm
Bcm
Lcm
PU2 PU4
356.001.00.1 17 78 118 2 38
Article no. smm
Bcm
Lcm
PU2 PU4
356.002.00.1 17 78 118 2 38
L
Bs
L
Bs
128 Geberit HDPE Drainage Systems 2010
Geberit Silent-db20ISOL sound insulation
ISOL insulation tape 150 x 1400 mm
Application
• For airborne sound insulation and solid-borne noise insulation
Additional Note
• Adhesive tape• Delivery in reels
Ordering Information
Insulation hose, 4 mm thick
Application
• For solid-borne noise insulation of pipes• For concealed installation
Product Details
Additional Note
• Delivery in reels
Ordering Information
Article no. smm
Bcm
Lm
PU1 PU2 PU4
300.021.00.1 12 15 1,4 1 10 210
Product material Polyethylene foam
Article no. dØmm
diØmm
smm
Lm
PU2 PU3 PU4
305.921.00.1 56 / 63 74 4 15 15 150 300
310.921.00.1 110 / 135 145 4 15 15 120 240
L(m)
B
s
B
dis
d
L(m)
Geberit Silent-db20End caps
Geberit HDPE Drainage Systems 2010 129
End caps
Silent-db20 protection cap for pipe end
Application
• For domestic drainage systems• For buildings with higher than average requirements concerning acoustic insulation• For welding and tensioning• For manufacturing cleaning openings• For manufacturing temporary pipeline connections
Silent-db20 screw-threaded end cap for welding and tensioning
Application
• For domestic drainage systems• For buildings with higher than average requirements concerning acoustic insulation• For welding and tensioning• For manufacturing cleaning openings• For manufacturing temporary pipeline connections
• Operation lever• Rigid frame structure with two slide bars• Sliding clamping carriage• Swivelling pipe support• Swivelling welding plate support• Guide bar for holding the welding plate support, manual or electric
plane
Additional Note
• Welding plate support• Pipe support prisms ø 50 - 160 mm• Support ø 75 - 125 mm with socket• Wooden transport case• Excluded: Tension devices• Excluded: Manual or electric plane• Excluded: Welding plate
Ordering Information
Universal welding machine
Application
• For buttwelding of pipes and fittings
Additional Note
• Welding plate support• Pipe support prisms ø 50 - 160 mm• Pipe support prism ø 200 mm• Support ø 75 - 125 mm with socket• Accessories case• Wooden transport case• Excluded: Tension devices• Excluded: Manual or electric plane• Excluded: Welding plate
Ordering Information
Tension devices for Media and Universal welding machines
Application
• For welding machine "Media" and "Universal"
Additional Note
• 2 tension devices (left and right)
Ordering Information
Tension devices, set 250 / 315
Application
• For welding machine "Universal"
Additional Note
• 2 tension devices (left and right)
Ordering Information
Media and Universal welding machines
Article no. dØmm
PU1
359.662.00.1 40 - 160 1
Article no. dØmm
PU1
356.201.00.1 40 - 315 1
506375110
90125
160
TYP
MEDIA 84
MASCH. NR.
Article no. dØmm
PU1
359.817.00.1 40 1
359.818.00.1 50 1
359.811.00.1 56 1
359.809.00.1 63 1
359.812.00.1 75 1
359.813.00.1 90 1
359.814.00.1 110 1
359.819.00.1 125 1
359.816.00.1 160 1
359.884.00.1 200 1
Article no. dØmm
PU1
359.835.00.1 250 1
359.836.00.1 315 1
ToolsWelding plates
Geberit HDPE Drainage Systems 2010 133
Set of accessories 200 - 315 mm diameters
Application
• For buttwelding of pipes and fittings• For welding machine "Universal"
Product Details
Additional Note
• Wooden transport case• Electric planer Ø 200 - 315 mm, 230 v/900 W• Drilling machine "Bosch" for electric planer• KSS Ø 315 mm, welding plate, 230 V/1300 W• Fixation for welding plate• Pipe support Ø 200 - 315 mm• Tension device, Ø 315 mm, left• Tension device, Ø 315 mm, right• Tension device, Ø 250 mm, left• Tension device, Ø 250 mm, right• Insert rings for Ø 200 mm• Allen key• Screw DIN 912 - M8 x 30-8.8• Electronic connection box
Ordering Information
Wooden transport case
Application
• For welding machine "Media" and "Universal"
Product Details
Ordering Information
Welding plates
Welding plate KSS-160 230 V
Application
• For welding machine "Media" and "Universal"• For pipes and fittings up to ø 160 mm
Characteristics
• Thermostat• Teflon coated
Product Details
Additional Note
• Combi holder
Ordering Information
Welding plate KSS-160 115 V
Product Details
Ordering Information
Leather protection case for Geberit KSS-160
Application
• For welding plate KSS-160
Ordering Information
Power input 900 W
Nominal voltage 230 V AC
Article no. dØmm
PU1 PU4
359.009.00.1 200 - 315 1 2
Product material Wood
Article no. dØmm
PU1 PU4
359.663.00.1 40 - 160 1 4
Welding plates
Power input 630 W
Nominal voltage 230 V AC
Article no. dØmm
PU1
359.641.00.1 32 - 160 1
Power input 630 W
Nominal voltage 120 V AC
Article no. dØmm
PU1
359.642.00.1 32 - 160 1
Article no. PU1
359.684.00.1 1
134 Geberit HDPE Drainage Systems 2010
ToolsPlaners for welding machines
Welding plate KSS-200 230 V
Application
• For welding machine "Universal"• For pipes with ø 40 to 200 mm
Characteristics
• Thermostat• Teflon coated
Product Details
Additional Note
• Excluded: Without combi holder
Ordering Information
Welding plate KSS -200 115 V
Application
• For pipes with ø 40 to 200 mm
Product Details
Ordering Information
Leather protection case for KSS-200
Application
• For welding plate KSS-200
Ordering Information
Combi holder for KSS-160 and 200
Application
• For welding plate KSS 160 und KSS 200
Ordering Information
Metal case for KSS-160
Application
• For welding plate KSS-160
Ordering Information
Planers for welding machines
Hand operated planer
Application
• For welding machine "Media" and "Universal"• For Geberit HDPE and Geberit Silent-db20• For pipes with ø 40 - 160 mm
Ordering Information
Power input 800 W
Nominal voltage 230 V AC
Article no. PU1
359.665.00.1 1
Power input 800 W
Nominal voltage 120 V AC
Article no. PU1
359.643.00.1 1
Article no. PU1
359.696.00.1 1
Article no. PU1
359.886.00.1 1
Article no. PU1 PU4
359.683.00.1 1 40
Planers for welding machines
Article no. dØmm
PU1
359.799.00.1 40-160 1
ToolsBlades for planers
Geberit HDPE Drainage Systems 2010 135
Electric planer for Media and Universal welding machines 40 - 160 mm
Application
• For Geberit HDPE and Geberit Silent-db20• For welding machine "Media" and "Universal"• For pipes with ø 40 - 160 mm
Product Details
Additional Note
• Hand drill
Ordering Information
Electric planer for Universal welding machine 40 - 200 mm
Application
• For Geberit HDPE and Geberit Silent-db20• For welding machine "Universal"• For pipes with ø 40 to 200 mm
Product Details
Additional Note
• Hand drill
Ordering Information
Blades for planers
Replacement blades for 359.085.00.1 (right)
Application
• For all Geberit electric planers up to ø 200 mm• For hand-operated planer
Additional Note
• Excluded: Screws
Ordering Information
Replacement blades for 359.085.00.1 (left)
Application
• For all Geberit electric planers up to ø 200 mm• For hand-operated planer
Additional Note
• Excluded: Screws
Ordering Information
Replacement blades for 359.061.00.1
Application
• For planer 359.082.00.1• For electric planer
Additional Note
• Excluded: Screws
Ordering Information
Mains frequency 50 Hz
Operating voltage 230 V AC
Article no. dØmm
PU1
359.046.00.1 40 - 160 1
Mains frequency 50 Hz
Operating voltage 230 V AC
Article no. dØmm
PU1 PU4
359.082.00.1 40 - 200 1 6
Blades for planers
Article no. dØmm
PU1
358.760.00.1 40 - 160 1
357.599.00.1 200 1
Article no. dØmm
PU1
358.759.00.1 40 - 160 1
357.600.00.1 200 1
Article no. PU1
357.751.00.1 1
136 Geberit HDPE Drainage Systems 2010
ToolsAccessories for welding machines Media and Universal
Carbide blades for Silent-db20
Application
• For all Geberit electric planers up to ø 200 mm• For hand-operated planer• For Geberit HDPE and Geberit Silent-db20
Characteristics
• Hardened
Additional Note
• Planer blade left• Planer blade right• 6 screws
Ordering Information
Accessories for welding machines Media and Universal
Pipe support prism
Application
• For welding machine "Media" and "Universal"
Characteristics
• With positioning slot for ø 135 mm
Ordering Information
Turnable pipe support
Application
• For welding machine "Media" and "Universal"
Ordering Information
Socket
Application
• For welding machine "Media" and "Universal"• For fixation of turnable pipe support
Characteristics
• Applicable left and right
Ordering Information
Article no. dØmm
PU1
240.474.00.1 40 - 200 1
Accessories for welding machines Media and Universal
Article no. dØmm
PU1
357.800.00.1 50 - 160 1
Article no. dØmm
PU1
358.729.00.1 75 - 125 1
242.462.00.1 135 / 160
Article no. PU1
356.831.00.1 1
ToolsElectrofusion machines
Geberit HDPE Drainage Systems 2010 137
Electrofusion machines
Electrofusion machine ESG 40/200 240 V
Application
• For electrofusion sleeve couplings ø 40 - 160 mm• For Geberit HDPE and Geberit Silent-db20• For electrofusion sleeve couplings with indicator, up to ø 160 mm• For electrofusion tape, up to ø 250 mm
Characteristics
• Check lamp• Start button
Product Details
Additional Note
• Power connection cable• Sleeve connection cable• Bag
Ordering Information
Electrofusion machine ESG 40/200 110 V
Application
• For Geberit HDPE and Geberit Silent-db20
Product Details
Ordering Information
Starter switch ESG-T2 for 200 mm - 315 mm
Application
• For starting the welding process via heat sleeve
Ordering Information
Electrofusion machines
Load resistance min. 5 Ohm
Load resistance max. 49 Ohm
Fuse 5 A delayed
Cable length 4 m
Mains frequency 50 - 60 Hz
Power input 1200 W
Power output 1120 W
Protection class I
Protection degree IP 44
Nominal voltage See specification plate
Temperature range during operation -10 - +40 °C
Welding cycle 80 s
Article no. dØmm
PU1
356.220.00.1 40 - 160 1
Operating voltage 115 V AC
Article no. PU1 PU3 PU4
356.224.00.1 1 2 16
Article no. PU1
356.177.00.2 1
138 Geberit HDPE Drainage Systems 2010
ToolsAccessories for electrofusion
Accessories for electrofusion
Sleeve connection set
Application
• For electrofusion machine ESG 40/200
Ordering Information
Note:
Suitable for use with 110 V and 240 V electrofusion machines