Gearbox Rotation Undo the tie bar bolts on the gearbox end. Carefully pull the gearbox away from the drum. Undo all the bolts. Once all the bolts are removed: - lift the gearbox housing bracket off the gearbox. - Rotate the bracket into the new desired position. Carefully replace gearbox housing bracket and tighten bolts. Replace and tighten the two bolts previously removed. Carefully slot the gearbox back onto the drum. Runva Winch Distribution PTY Limited runvawinch.com.au 1 2 3 4 5 6
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Gearbox Rotation
Undo the tie bar bolts on the gearbox end. Carefully pull the gearbox away from the drum.
Undo all the bolts.Once all the bolts are removed: - lift the gearbox housing bracket off the gearbox.- Rotate the bracket into the new desired position.
Carefully replace gearbox housing bracket and tighten bolts.
Replace and tighten the two bolts previously removed.
Carefully slot the gearbox back onto the drum.
Runva Winch Distribution PTY Limited runvawinch.com.au
1 2
3 4
5 6
Related Documents
