See reverse side for contact information Note: Part numbers and standards’ values may change. Consult LECO for the latest information. GDS900 Consumable & Spare Parts Reference Card Form No. 203-104-065 REV4 LECO is a registered trademark of LECO Corporation 8/26/20 607-061 O-RING (4) REQ’D 633-101-985 VACUUM PUMP 691-103-162 DISCONNECT ASSEMBLY HOSE FROM GDS 615-341 CLAMP (4) REQ’D 607-064 MIST FILTER 607-111 FORELINE TRAP 190-608 SCREW (2 REQ’D) 191-311 SCREW (4 REQ’D) ANODE* INNER SPACER* O-RING (B)* 773-661 FITTING 770-362 TUBING 8.5 INCH 691-102-898 FITTING (2 REQ’D) 770-362 TUBING 9 INCH 612-819 SCREW SPACER (4 REQ’D) 190-389 SCREW (4 REQ’D) 612-897 FRONT LAMP SPACER CATHODE SPACER/SLEEVE* 607-406 O-RING CATHODE* 190-898 SET SCREW O-RING (A)* 778-114 O-RING 772-520 O-RING 765-976 O-RING 772-520 O-RING 625-603-353 TUBE 619-590-409 TUBE 617-083 O-RING (2 REQ’D) 772-695 SCREW UPPER BODY SCREW (4-REQ'D) D-SEAL 607-303 ODOR ELEMENT 607-302 MIST FILTER ELEMENT O-RING LOWER BODY WASHER PLUG EMPOWERING RESULTS 190-705 SCREW 691-102-990 HANDLE SCREW (2 REQ’) 691-102-475 WEDGE CLAMP SET SCREW (INSTALL LAST. DO NOT OVER TIGHTEN. USE ONLY TO REMOVE WINDOW FOR CLEANING) INTERNAL WEDGE 691-103-353 REMOVBLE WEDGE 612-310 O-RING (2 REQ’D) 612-102-833 O-RING 691-102-756 PLATE TD-5762 PLATE 618-805 O-RING (2 REQ’D) 190-312 SCREWS (4 REQ’D) 191-321 SCREWS (4 REQ’D) 691-102-964 HEATER ASSY. 691-103-265 WINDOW (WEAR POWDER FREE, NITRILE GLOVES WHEN HANDLING WINDOW. NO FINGERPRINTS!) * See matrix on next page.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
See reverse side for contact information
Note: Part numbers and standards’ values may change. Consult LECO for the latest information.
GDS900Consumable & Spare Parts Reference Card
Form No. 203-104-065 REV4 LECO is a registered trademark of LECO Corporation 8/26/20
607-061 O-RING(4) REQ’D
633-101-985VACUUM PUMP
691-103-162DISCONNECTASSEMBLY
HOSEFROM
GDS
615-341 CLAMP(4) REQ’D
607-064MIST FILTER
607-111FORELINE
TRAP
FLOW
190-608SCREW(2 REQ’D)
191-311SCREW
(4 REQ’D)
ANODE* INNERSPACER*
O-RING (B)*773-661FITTING
770-362TUBING8.5 INCH
691-102-898FITTING
(2 REQ’D)
770-362TUBING9 INCH
612-819SCREW SPACER(4 REQ’D)
190-389SCREW(4 REQ’D)
612-897FRONT LAMP
SPACER CATHODE
SPACER/SLEEVE*607-406O-RING
CATHODE*
190-898SET SCREW O-RING (A)*
778-114O-RING
772-520O-RING
765-976O-RING
772-520O-RING
625-603-353TUBE
619-590-409TUBE
617-083O-RING(2 REQ’D)
772-695SCREW
FLOW
UPPERBODY
SCREW(4-REQ'D)
D-SEAL
607-303ODORELEMENT
607-302MIST FILTERELEMENT
O-RING
LOWERBODY
WASHER
PLUG
EMPOWERING RESULTS
190-705SCREW691-102-990
HANDLESCREW(2 REQ’)
691-102-475WEDGE CLAMP
SET SCREW(INSTALL LAST.DO NOT OVER
TIGHTEN.USE ONLY
TO REMOVEWINDOW FOR
CLEANING)
INTERNALWEDGE
691-103-353REMOVBLE
WEDGE
612-310O-RING(2 REQ’D)
612-102-833O-RING
691-102-756PLATE
TD-5762PLATE
618-805O-RING
(2 REQ’D)
190-312SCREWS(4 REQ’D)
191-321SCREWS(4 REQ’D)
691-102-964HEATER ASSY.
691-103-265WINDOW(WEAR POWDER FREE, NITRILE GLOVES WHENHANDLING WINDOW. NO FINGERPRINTS!)
* See matrix on next page.
Consumables and Supplies502-234-HAZ Alcohol502-237 Foam Wipes502-259 Cleaning Pad779-377 Vacuum Pump Oil615-797 Cotton Swabs502-629 Lens Tissues612-879 4 mm Lamp Rebuild Kit810-487 60 grit ZrO Belts Box/52
810-499 120 grit ZrO Belts Box/52
501-171-HAZ Anhydrone502-174-HAZ Lecosorb 20/30502-878 Copper Sticks501-241 Vacuum Grease502-177 Quartz Wool775-306 Screen Filter502-233 Alumina Pellets691-102-756 Window691-103-266 Conditioning Piece LC1-APMA Kits104-204 Standard PMA Kit104-205 Extended PMA KitTools612-399 Anode Depth Gauge607-309 Reamer Tool691-101-505 Reamer Locking Tool617-274 Sleeve Alignment Tool612-799 4mm Sleeve Removal Tool612-812 Anode Removal Tool612-599 Anode Alignment Tool633-103-149 Reamed Anode Alignment Tool691-103-120 Wrench 7mm762-515 O-Ring Removal Tool691-102-947 Water Fill Tool607-791 Oil Drain Tool607-298 Chapman Ratchet Kit
United States: 800-292-6141 • Canada: 800-268-0215 • Other Countries: [email protected] • www.leco.com • ISO-9001:2015 Q-994 • © 2020 LECO Corporation
EMPOWERING RESULTS
502-177QUARTZWOOL~ 0.5 INCH
502-177QUARTZWOOL~ 1 INCH
502-878COPPERSTICKS~ 5 INCH
619-590-409QUARTZ
TUBE
502-177QUARTZ WOOL1 INCH
502-177QUARTZWOOL0.5 INCH
502-174-HAZLECOSORB2.66 INCH
501-171-HAZANHYDRONE5.33 INCH
625-603-353INCOMING
CARRIER GASSCRUBBER
775-306SCREENFILTER
Lamp Size Cathode Anode Sleeve O-ring A O-ring B Inner Spacer Reamer Assy
DC 4 mm 691-102-312 612-815 691-103-350 607-315 534-356 618-296 621-339
DC 2 mm 691-102-312 612-823 691-103-350 607-315 634-356 618-296 607-769
DC 2 mm Small 691-103-321 618-386 691-103-351 609-114 618-382 618-297 618-384
NOTE: Part numbers and standards’ values may change.Consult LECO for latest information.
Optional Accessories633-103-354 Compressed Air (CGA 346)
2-Stage Pressure Regulator Kit633-103-358 Inert Gas (CGA 580) 2-Stage
Pressure Regulator Kit633-103-359 UHP In-Line (0 to 50) Pressure Regulator
with Bracket Kit691-102-650 Kit Table GDS Integrated691-102-856 Kit Workstation Sit/Stand691-103-430 Porous Sample Holder691-103-474 Porous Sample Holder for Powder Metals, TRSBars612-798 Sample Briquette Holder612-933 4 mm Soft Material Reamer691-103-425 3 mm Wire Sample Holder691-103-306 Vacuum Pump Sound Abatement Enclosure
Please contact your local sales engineer for all yoursample preparation needs.
Form No. 203-104-065 REV4 LECO is a registered trademark of LECO Corporation 8/26/20
Related Documents
